3.0 zedgk_12_fenestration_and_daylighting_controls eb3bfd3d-64b6-4a9f-857d-3dd8a7becec5 a590f5fe-eb78-4538-b2fe-3984abdae2d9 20200401T014101Z 7D3EA3A9 ZEDGK12FenestrationAndDaylightingControls ZEDG K12 - Fenestration and Daylighting Controls This measure will remove all existing exterior windows, glass doors, and skylights from your model. They will be replaced with view and daylight windows as recommended by the Net Zero K12 recommendations. Windows on the south facade will have a exterior shading or light shelf surfaces depending on if they are view or daylight windows. East and west view windows will have internal shading controls. In spaces with daylighting controls daylight sensors will be added. The modeler should inspect where the sensors were placed, the recommended illuminance setpoint, and the fraction of the zones lighting controlled by the sensor. This measure is intended for use in models created form space types defined in the primary and secondary building types. Other space types used in the model will not receive any new fenestration, however fenestration will be removed from all space types. Attic and plenum spaces will not receive any new fenestration. Daylighting will only be added to north and south facades. North and south facades can be +/- 30 degrees of north and south. East and west facades will only receive view windows. Mechanical rooms won't relieve any view or daylight windows. Kitchens and Restrooms wont' receive any view windows. Toplighting will not be added. In sidelit spaces the sensor's depth in from the wall will typically be the same as the height of the wall that the daylight windows is on. This depth is also what is used to calculate the daylight fraction of the space. In spaces that are non convex, such as an L shaped space, we may not be able to place a sensor, if that happens a warning will be issued. cost_daylight_glazing Cost per Area for Proposed Daylighting Window Constructions ($/ft^2). Double true false 0 cost_view_glazing Cost per Area for Proposed View Window Constructions ($/ft^2). Double true false 0 cost_shading_surface Cost per Area for Proposed Exterior Shading Surface Construction ($/ft^2). Double true false 0 cost_light_shelf Cost per Area for Proposed Light Shelf Construction ($/ft^2). Double true false 0 Envelope.Fenestration Uses SketchUp API false boolean Measure Type ModelMeasure string SecondarySchoolCustomRef_01_0228.osm osm test 3E42FA7D README.md.erb erb readmeerb 703C9964 README.md md readme 3C648083 LICENSE.md md license E0468DD6 OsLib_AedgMeasures.rb rb resource 19D0BBFD measure_Test.rb rb test FECD75FA OpenStudio 2.0.0 2.8.0 measure.rb rb script C1E9EF61