=begin
#Vault HTTP API

#Storing, retrieving, and managing sensitive data within a VGS organization.  **NOTE:** _The Vault API is intended only for environments that are already PCI-compliant. If you want to use this API, but are not yet PCI-compliant, you can use [VGS Collect](https://www.verygoodsecurity.com/docs/vgs-collect/what-is-it) or VGS Proxy with [Inbound Routes](https://www.verygoodsecurity.com/docs/getting-started/quick-integration#securing-inbound-connection) to quickly and seamlessly achieve compliance._  Looking for the old version of the API? Find it [here](https://www.verygoodsecurity.com/docs/api/1/vault).  # Introduction  Each encrypted value stored in a VGS vault has one or multiple _aliases_ associated with it. These aliases are fully opaque and retain no information about the underlying data. The user may safely store aliases without compromising data security.  **NOTE:** The API works with persistent storage only. Unlike volatile storage, this means that the data is stored permanently, without any implicit TTL.  Aliases are not valuable on their own. However, they can be used to decrypt the associated value and pass it to another service via the [forward proxy](https://www.verygoodsecurity.com/docs/guides/outbound-connection).  ## Alias Formats  Each alias corresponds to a certain format. There are several alias formats suitable for different kinds of sensitive data.  For example, `UUID` produces a random Base58-encoded UUID string with an environment-dependent prefix:  ``` tok_sandbox_bhtsCwFUzoJMw9rWUfEV5e ```  This format is generic and suitable for any kind of data.  The tables below contain descriptions of all alias formats recognized by the API.  ### Generic Formats  | Value                   | Description                                           | |-------------------------|-------------------------------------------------------| | `NUM_LENGTH_PRESERVING` | Length-Preserving, Numeric                            | | `RAW_UUID`              | UUID                                                  | | `UUID`                  | UUID (Prefixed, Base58-Encoded)                       | | `GENERIC_T_FOUR`        | UUID (Prefixed, Base58-Encoded, Last four preserving) |  ### Account Number Formats  | Value                             | Description                          | |-----------------------------------|--------------------------------------| | `FPE_ACC_NUM_T_FOUR`              | Length-Preserving, Numeric (A4)      | | `FPE_ALPHANUMERIC_ACC_NUM_T_FOUR` | Length-Preserving, Alphanumeric (A4) |   ### Payment Card Formats  | Value            | Description                                 | |------------------|---------------------------------------------| | `FPE_SIX_T_FOUR` | Format-Preserving, Luhn Valid (6T4)         | | `FPE_T_FOUR`     | Format-Preserving, Luhn Valid (T4)          | | `PFPT`           | Prefixed, Luhn Valid, 19-Digit Fixed Length |  ### SSN Formats  | Value            | Description            | |------------------|------------------------| | `FPE_SSN_T_FOUR` | Format-Preserving (A4) |  # Authentication  This API uses `Basic` authentication.  Credentials to access the API can be generated on the [dashboard](https://dashboard.verygoodsecurity.com) by going to the Settings section of the vault of your choosing.  [Docs » Guides » Access credentials](https://www.verygoodsecurity.com/docs/settings/access-credentials)  # Rate Limiting  The API allows up to 3,000 requests per minute. Requests are associated with the vault, regardless of the access credentials used to authenticate the request.  Your current rate limit is included as HTTP headers in every API response:  | Header Name             | Description                                              | |-------------------------|----------------------------------------------------------| | `x-ratelimit-remaining` | The number of requests remaining in the 1-minute window. |  If you exceed the rate limit, the API will reject the request with HTTP [429 Too Many Requests](https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/429).  # Errors  The API uses standard HTTP status codes to indicate whether the request succeeded or not.  In case of failure, the response body will be JSON in a predefined format. For example, trying to create too many aliases at once results in the following response:  ```json {     \"errors\": [         {             \"status\": 400,             \"title\": \"Bad request\",             \"detail\": \"Too many values (limit: 20)\",             \"href\": \"https://api.sandbox.verygoodvault.com/aliases\"         }     ] } ``` 

The version of the OpenAPI document: 1.0.0
Contact: support@verygoodsecurity.com
Generated by: https://openapi-generator.tech
OpenAPI Generator version: 5.0.1-SNAPSHOT

=end

# load the gem
require 'vgs_api_client'

# The following  was generated by the `rspec --init` command. Conventionally, all
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
# The generated `.rspec` file contains `--require spec_helper` which will cause
# this file to always be loaded, without a need to explicitly require it in any
# files.
#
# Given that it is always loaded, you are encouraged to keep this file as
# light-weight as possible. Requiring heavyweight dependencies from this file
# will add to the boot time of your test suite on EVERY test run, even for an
# individual file that may not need all of that loaded. Instead, consider making
# a separate helper file that requires the additional dependencies and performs
# the additional setup, and require it from the spec files that actually need
# it.
#
# The `.rspec` file also contains a few flags that are not defaults but that
# users commonly want.
#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
  # rspec-expectations config goes here. You can use an alternate
  # assertion/expectation library such as wrong or the stdlib/minitest
  # assertions if you prefer.
  config.expect_with :rspec do |expectations|
    # This option will default to `true` in RSpec 4. It makes the `description`
    # and `failure_message` of custom matchers include text for helper methods
    # defined using `chain`, e.g.:
    #     be_bigger_than(2).and_smaller_than(4).description
    #     # => "be bigger than 2 and smaller than 4"
    # ...rather than:
    #     # => "be bigger than 2"
    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
  end

  # rspec-mocks config goes here. You can use an alternate test double
  # library (such as bogus or mocha) by changing the `mock_with` option here.
  config.mock_with :rspec do |mocks|
    # Prevents you from mocking or stubbing a method that does not exist on
    # a real object. This is generally recommended, and will default to
    # `true` in RSpec 4.
    mocks.verify_partial_doubles = true
  end

# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
=begin
  # These two settings work together to allow you to limit a spec run
  # to individual examples or groups you care about by tagging them with
  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
  # get run.
  config.filter_run :focus
  config.run_all_when_everything_filtered = true

  # Allows RSpec to persist some state between runs in order to support
  # the `--only-failures` and `--next-failure` CLI options. We recommend
  # you configure your source control system to ignore this file.
  config.example_status_persistence_file_path = "spec/examples.txt"

  # Limits the available syntax to the non-monkey patched syntax that is
  # recommended. For more details, see:
  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
  config.disable_monkey_patching!

  # This setting enables warnings. It's recommended, but in some cases may
  # be too noisy due to issues in dependencies.
  config.warnings = true

  # Many RSpec users commonly either run the entire suite or an individual
  # file, and it's useful to allow more verbose output when running an
  # individual spec file.
  if config.files_to_run.one?
    # Use the documentation formatter for detailed output,
    # unless a formatter has already been configured
    # (e.g. via a command-line flag).
    config.default_formatter = 'doc'
  end

  # Print the 10 slowest examples and example groups at the
  # end of the spec run, to help surface which specs are running
  # particularly slow.
  config.profile_examples = 10

  # Run specs in random order to surface order dependencies. If you find an
  # order dependency and want to debug it, you can fix the order by providing
  # the seed, which is printed after each run.
  #     --seed 1234
  config.order = :random

  # Seed global randomization in this process using the `--seed` CLI option.
  # Setting this allows you to use `--seed` to deterministically reproduce
  # test failures related to randomization by passing the same `--seed` value
  # as the one that triggered the failure.
  Kernel.srand config.seed
=end
end