STATE_DISABLED STATE_ENABLED DOMAIN_NAME_CHECK_MODE_UNKNOWN DOMAIN_NAME_CHECK_MODE_NONE DOMAIN_NAME_CHECK_MODE_STRICT DOMAIN_NAME_CHECK_MODE_ALLOW_UNDERSCORES DOMAIN_NAME_CHECK_MODE_IDN_COMPATIBLE LDNS_PROBE_PROTOCOL_ICMP LDNS_PROBE_PROTOCOL_TCP LDNS_PROBE_PROTOCOL_UDP LDNS_PROBE_PROTOCOL_DNS_DOT LDNS_PROBE_PROTOCOL_DNS_REV LB_METHOD_RETURN_TO_DNS LB_METHOD_NULL LB_METHOD_ROUND_ROBIN LB_METHOD_RATIO LB_METHOD_TOPOLOGY LB_METHOD_STATIC_PERSIST LB_METHOD_GLOBAL_AVAILABILITY LB_METHOD_VS_CAPACITY LB_METHOD_LEAST_CONN LB_METHOD_LOWEST_RTT LB_METHOD_LOWEST_HOPS LB_METHOD_PACKET_RATE LB_METHOD_CPU LB_METHOD_HIT_RATIO LB_METHOD_QOS LB_METHOD_BPS LB_METHOD_DROP_PACKET LB_METHOD_EXPLICIT_IP LB_METHOD_CONNECTION_RATE LB_METHOD_VS_SCORE Sets the state to indicate whether to dump the topology.

Gets the state to indicate whether to dump the topology.

Sets the state to indicate whether to allow topology load-balancing to server objects with zero scores.

Gets the state to indicate whether to allow topology load-balancing to server objects with zero scores.

Sets the state to indicate whether to cache LDNSes.

Gets the state to indicate whether to cache LDNSes.

Sets the state to indicate whether local DNS servers that belong to AOL (America Online) are recognized.

Gets the state to indicate whether local DNS servers that belong to AOL (America Online) are recognized.

Sets the state to indicate whether to check the availability of virtual servers.

Gets the state to indicate whether to check the availability of virtual servers.

Sets the state to indicate whether to check availability of a path before it uses the path for load balancing.

Gets the state to indicate whether to check availability of a path before it uses the path for load balancing.

Sets the state to indicate whether persistent connections are allowed to remain connected, until TTL expires, when disabling a pool.

Gets the state to indicate whether persistent connections are allowed to remain connected, until TTL expires, when disabling a pool.

Sets the state to indicate whether ripeness value is allowed to be reset.

Gets the state to indicate whether ripeness value is allowed to be reset.

Sets the state to indicate whether to respect virtual server status when load balancing switches to the fallback mode.

Gets the state to indicate whether to respect virtual server status when load balancing switches to the fallback mode.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the state to indicate whether to respect ACL.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the state to indicate whether to respect ACL.

Sets the default alternate LB method.

Gets the default alternate LB method.

Sets the default fallback LB method.

Gets the default fallback LB method.

Sets the mode for GTM to use when performing domain name checking. The default value is DOMAIN_NAME_CHECK_MODE_STRICT.

Gets the mode for GTM to use when performing domain name checking.

Sets the persistence mask. This function is deprecated and new applications should use set_static_persistence_cidr_mask.

Gets the persistence mask. This function is deprecated and new applications should use get_static_persistence_cidr_mask.

Sets the CIDR mask (length) for the static persistence load balancing mode.

Gets the CIDR mask (length) for the static persistence load balancing mode.

Sets the state that if enabled, it will set the recursion bit in all DNS responses from GTM.

Gets the state that if enabled, it will set the recursion bit in all DNS responses from GTM.

Sets the factor used to normalize link capacity values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize link capacity values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize round-trip time values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize round-trip time values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize hops when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize hops when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize ping packet completion rates when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize ping packet completion rates when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize packet rates when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize packet rates when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize bits per second when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize bits per second when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize virtual server capacity values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize virtual server capacity values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize topology values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize topology values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize connection rates when the load balancing mode is set to LB_METHOD_QOS. This function is deprecated and new applications should use vs_score.

Gets the factor used to normalize connection rates when the load balancing mode is set to LB_METHOD_QOS. This function is deprecated and new applications should use vs_score.

Sets the factor used to normalize virtual server (VS) score when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize virtual server (VS) score when the load balancing mode is set to LB_METHOD_QOS.

Sets the frequency at which to retry path data.

Gets the frequency at which to retry path data.

Sets the frequency at which GTM queries other BIG-IP systems for updated data. When configuring monitors for BIG-IP systems, F5 Networks recommends that the probe interval option for the monitor be equal to or greater than the timer heartbeat option. The default value is 10.

Gets the frequency at which GTM queries other BIG-IP systems for updated data.

Sets the frequency at which to retrieve auto-configuration data.

Gets the frequency at which to retrieve auto-configuration data.

Sets the frequency at which to retrieve path and metrics data from the system cache.

Gets the frequency at which to retrieve path and metrics data from the system cache.

Sets the default probe limit, the number of times to probe a path.

Gets the default probe limit, the number of times to probe a path.

Sets the "down_threshold" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Gets the "down_threshold" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Sets the "down_multiple" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Gets the "down_multiple" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Sets the TTL for the path information.

Gets the TTL for the path information.

Sets the TTL for the traceroute information.

Gets the TTL for the traceroute information.

Sets the number of seconds that an inactive LDNS remains cached. This function is deprecated (due to being misnamed); new applications should use set_ldns_duration.

Sets the number of seconds that an inactive LDNS remains cached.

Gets the number of seconds that an inactive LDNS remains cached.

Sets the number of seconds that a tmm load-balancer will wait before sending an update for a LDNS which has been accessed by a client.

Gets the minimum number of seconds that a tmm load-balancer will wait before sending an update for a LDNS which has been accessed by a client.

Sets the number of seconds that a path remains cached after its last access.

Gets the number of seconds that a path remains cached after its last access.

Sets the number of packets to send out in a probe request to determine path information.

Gets the number of packets to send out in a probe request to determine path information.

Sets the length of the packet sent out in a probe request to determine path information.

Gets the length of the packet sent out in a probe request to determine path information.

Sets the timeout for RTT, in seconds.

Gets the timeout for RTT, in seconds.

Sets the maximum synchronous monitor request, which is used to control the maximum number of monitor requests being sent out at one time for a given probing interval. This will allow the user to smooth out monitor probe requests as much as they desire.

Gets the maximum synchronous monitor request, which is used to control the maximum number of monitor requests being sent out at one time for a given probing interval. This will allow the user to smooth out monitor probe requests as much as they desire.

Sets the port to use to collect traceroute (hops) data.

Gets the port to use to collect traceroute (hops) data.

Sets the state indicating whether the dynamic load balancing modes can use path data even after the TTL for the path data has expired.

Gets the state indicating whether the dynamic load balancing modes can use path data even after the TTL for the path data has expired..

Sets the LDNS probe protocols. The order of the protocols in the sequence will be used to indicate the preferred protocols, i.e. the first protocol in the sequence is the most preferred protocol. If you'd like to remove an item, get the LDNS probe protocols, remove the item, then do set.

Gets the LDNS probe protocols. The order of the protocols in the sequence will be used to indicate the preferred protocols, i.e. the first protocol in the sequence is the most preferred protocol.

Sets the state that if enabled, GTM will still probe disabled object.

Gets the state that if enabled, GTM will still probe disabled object.

Sets the link limit factor, which is used to set a target percentage for traffic. For example, if it is set to 90, the ratio cost based load-balancing will set a ratio with a maximum value equal to 90% of the limit value for the link. Default is 95%.

Gets the link limit factor, which is used to set a target percentage for traffic. For example, if it is set to 90, the ratio cost based load-balancing will set a ratio with a maximum value equal to 90% of the limit value for the link. Default is 95%.

Sets the over-limit link limit factor. If traffic on a link exceeds the limit, this factor will be used instead of the link_limit_factor until the traffic is over limit for more than max_link_over_limit_count times. Once the limit has been exceeded too many times, all traffic is shut off for the link. The default for over_limit_link_limit_factor is 90%.

Gets the over-limit link limit factor. If traffic on a link exceeds the limit, this factor will be used instead of the link_limit_factor until the traffic is over limit for more than max_link_over_limit_count times. Once the limit has been exceeded too many times, all traffic is shut off for the link. The default for over_limit_link_limit_factor is 90%.

Sets the link prepaid factor. Maximum percentage of traffic allocated to link which has a traffic allotment which has been prepaid. Default is 95%.

Gets the link prepaid factor. Maximum percentage of traffic allocated to link which has a traffic allotment which has been prepaid. Default is 95%.

Sets the link compensate inbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to inbound traffic which the major volume will initiate from internal clients.

Gets the link compensate inbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to inbound traffic which the major volume will initiate from internal clients.

Sets the link compensate outbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to outbound traffic which the major volume will initiate from internal clients.

Gets the link compensate outbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to outbound traffic which the major volume will initiate from internal clients.

Sets the link compensation history.

Gets the link compensation history.

Sets the maximum link over limit count. The count of how many times in a row traffic may be over the defined limit for the link before it is shut off entirely. Default is 1.

Gets the maximum link over limit count. The count of how many times in a row traffic may be over the defined limit for the link before it is shut off entirely. Default is 1.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the lower bound percentage row options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the lower bound percentage row options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the lower bound percentage column options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the lower bound percentage column options in Internet Weather Map.

Sets the timeout, in seconds, indicating how long to wait before automatically saving the GTM configuration to the bigip_gtm.conf file after a change is made to the GTM configuration. Setting this timeout to -1 will cause the GTM configuration to NEVER be saved. Setting this timeout to 0 will cause the GTM configuration to be saved immediately. Setting this timeout to a value N, greater than 0, will cause the GTM configuration to be saved to bigip_gtm.conf no fewer than N seconds after a configuration change is made.

Gets the timeout, in seconds, indicating how long to wait before automatically saving the GTM configuration to the bigip_gtm.conf file after a change is made to the GTM configuration.

Sets the state indicating whether to auto configure BIGIP/3DNS servers (automatic addition and deletion of self IPs and virtual servers.

Gets the state indicating whether to auto configure BIGIP/3DNS servers (automatic addition and deletion of self IPs and virtual servers.

Sets the state to indicate whether to autosync. Allows automatic updates of wideip.conf to/from other 3-DNSes.

Gets the state to indicate whether to autosync. Allows automatic updates of wideip.conf to/from other 3-DNSes.

Sets the state to indicate whether to auto-synchronize named configuration. Allows automatic updates of named.conf to/from other 3-DNSes.

Gets the state to indicate whether to auto_synchronize named configuration. Allows automatic updates of named.conf to/from other 3-DNSes.

Sets the sync group name.

Gets the sync group name.

Sets the sync timeout. If synch'ing from a remote 3-DNS takes longer than this timeout, then abort the connection.

Gets the sync timeout. If synch'ing from a remote 3-DNS takes longer than this timeout, then abort the connection.

Sets the sync zones timeout. If synch'ing named and zone configuration takes this timeout, then abort the connection.

Gets the sync zones timeout. If synch'ing named and zone configuration takes this timeout, then abort the connection.

Sets the allowable time difference for data to be out of sync between members of a sync group.

Gets the allowable time difference for data to be out of sync between members of a sync group.

Sets the state to indicate whether the 3-DNS Controller selects the topology record that is most specific and, thus, has the longest match, in cases where there are several IP/netmask items that match a particular IP address. If you select No, the 3-DNS Controller uses the first topology record that matches (according to the order of entry) in the topology statement.

Gets the state to indicate whether the 3-DNS Controller selects the topology record that is most specific and, thus, has the longest match, in cases where there are several IP/netmask items that match a particular IP address. If you select No, the 3-DNS Controller uses the first topology record that matches (according to the order of entry) in the topology statement.

Sets the state to indicate whether the system marks a virtual server down when the server on which the virtual server is configured can no longer be reached via iQuery. The default value is enabled.

Gets the state to indicate whether the system marks a virtual server down when the server on which the virtual server is configured can no longer be reached via iQuery.

This method is deprecated (immediately) and should not be used. Please enable/disable pool members directly if desired. Sets the threshold for the topology ACL.

This method is deprecated (immediately) and should not be used. Please enable/disable pool members directly if desired. Gets the threshold for the topology ACL.

Sets the state to propagate wild card A records for wild card wide IP records. DNS allows wildcard entries in the form of "*.zone.com". Best practices indicate that using wild cards for A records may have unintended consequences. This results in a NXDOMAIN responses, which is valid and correct. The only valid DNS wild card is in the form of "*.zone.com". The entire leftmost term must be "*" and ONLY "*". There must be no other "*" in the name. So not every GTM supported wild card will be propagated to DNS. DNS wild cards of the following forms will be propagated: "*.zone.com". The following will not: "*part.zone.com", "part*.zone.com", "part.*.zone.com", "p?rt.zone.com". There is a workaround without setting this swtich - entering wild card records manually through ZRD.

Gets the state to propagate wild card A records for wild card wide IP records.

Sets the peer leader, the name of the GTM responsible for creating new DNSSEC keys.

Gets the peer leader, the name of the GTM responsible for creating new DNSSEC keys.

Sets the state to indicate whether GTM forwards the availability status of objects (Wide IP, Application, Link, Data Center, Server, Virtual Server, Pool, Pool Member, Prober Pool, Prober Pool Member) to the subscribers. This enables the iControl clients to receive event notifications for the availability status changes.

Gets the state to indicate whether the GTM forwards the availability status of objects to the subscribers.

Gets the version information for this interface.

Sets the state to indicate whether to dump the topology.

Gets the state to indicate whether to dump the topology.

Sets the state to indicate whether to allow topology load-balancing to server objects with zero scores.

Gets the state to indicate whether to allow topology load-balancing to server objects with zero scores.

Sets the state to indicate whether to cache LDNSes.

Gets the state to indicate whether to cache LDNSes.

Sets the state to indicate whether local DNS servers that belong to AOL (America Online) are recognized.

Gets the state to indicate whether local DNS servers that belong to AOL (America Online) are recognized.

Sets the state to indicate whether to check the availability of virtual servers.

Gets the state to indicate whether to check the availability of virtual servers.

Sets the state to indicate whether to check availability of a path before it uses the path for load balancing.

Gets the state to indicate whether to check availability of a path before it uses the path for load balancing.

Sets the state to indicate whether persistent connections are allowed to remain connected, until TTL expires, when disabling a pool.

Gets the state to indicate whether persistent connections are allowed to remain connected, until TTL expires, when disabling a pool.

Sets the state to indicate whether ripeness value is allowed to be reset.

Gets the state to indicate whether ripeness value is allowed to be reset.

Sets the state to indicate whether to respect virtual server status when load balancing switches to the fallback mode.

Gets the state to indicate whether to respect virtual server status when load balancing switches to the fallback mode.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the state to indicate whether to respect ACL.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the state to indicate whether to respect ACL.

Sets the default alternate LB method.

Gets the default alternate LB method.

Sets the default fallback LB method.

Gets the default fallback LB method.

Sets the mode for GTM to use when performing domain name checking. The default value is DOMAIN_NAME_CHECK_MODE_STRICT.

Gets the mode for GTM to use when performing domain name checking.

Sets the persistence mask. This function is deprecated and new applications should use set_static_persistence_cidr_mask.

Gets the persistence mask. This function is deprecated and new applications should use get_static_persistence_cidr_mask.

Sets the CIDR mask (length) for the static persistence load balancing mode.

Gets the CIDR mask (length) for the static persistence load balancing mode.

Sets the state that if enabled, it will set the recursion bit in all DNS responses from GTM.

Gets the state that if enabled, it will set the recursion bit in all DNS responses from GTM.

Sets the factor used to normalize link capacity values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize link capacity values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize round-trip time values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize round-trip time values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize hops when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize hops when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize ping packet completion rates when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize ping packet completion rates when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize packet rates when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize packet rates when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize bits per second when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize bits per second when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize virtual server capacity values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize virtual server capacity values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize topology values when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize topology values when the load balancing mode is set to LB_METHOD_QOS.

Sets the factor used to normalize connection rates when the load balancing mode is set to LB_METHOD_QOS. This function is deprecated and new applications should use vs_score.

Gets the factor used to normalize connection rates when the load balancing mode is set to LB_METHOD_QOS. This function is deprecated and new applications should use vs_score.

Sets the factor used to normalize virtual server (VS) score when the load balancing mode is set to LB_METHOD_QOS.

Gets the factor used to normalize virtual server (VS) score when the load balancing mode is set to LB_METHOD_QOS.

Sets the frequency at which to retry path data.

Gets the frequency at which to retry path data.

Sets the frequency at which GTM queries other BIG-IP systems for updated data. When configuring monitors for BIG-IP systems, F5 Networks recommends that the probe interval option for the monitor be equal to or greater than the timer heartbeat option. The default value is 10.

Gets the frequency at which GTM queries other BIG-IP systems for updated data.

Sets the frequency at which to retrieve auto-configuration data.

Gets the frequency at which to retrieve auto-configuration data.

Sets the frequency at which to retrieve path and metrics data from the system cache.

Gets the frequency at which to retrieve path and metrics data from the system cache.

Sets the default probe limit, the number of times to probe a path.

Gets the default probe limit, the number of times to probe a path.

Sets the "down_threshold" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Gets the "down_threshold" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Sets the "down_multiple" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Gets the "down_multiple" value. If a host server or a host virtual server has been marked down for the last down_threshold probing cycles (timer_get_host_data or timer_get_vs_data respectively), then perform service checks every down_multiple * timer period instead.

Sets the TTL for the path information.

Gets the TTL for the path information.

Sets the TTL for the traceroute information.

Gets the TTL for the traceroute information.

Sets the number of seconds that an inactive LDNS remains cached. This function is deprecated (due to being misnamed); new applications should use set_ldns_duration.

Sets the number of seconds that an inactive LDNS remains cached.

Gets the number of seconds that an inactive LDNS remains cached.

Sets the number of seconds that a tmm load-balancer will wait before sending an update for a LDNS which has been accessed by a client.

Gets the minimum number of seconds that a tmm load-balancer will wait before sending an update for a LDNS which has been accessed by a client.

Sets the number of seconds that a path remains cached after its last access.

Gets the number of seconds that a path remains cached after its last access.

Sets the number of packets to send out in a probe request to determine path information.

Gets the number of packets to send out in a probe request to determine path information.

Sets the length of the packet sent out in a probe request to determine path information.

Gets the length of the packet sent out in a probe request to determine path information.

Sets the timeout for RTT, in seconds.

Gets the timeout for RTT, in seconds.

Sets the maximum synchronous monitor request, which is used to control the maximum number of monitor requests being sent out at one time for a given probing interval. This will allow the user to smooth out monitor probe requests as much as they desire.

Gets the maximum synchronous monitor request, which is used to control the maximum number of monitor requests being sent out at one time for a given probing interval. This will allow the user to smooth out monitor probe requests as much as they desire.

Sets the port to use to collect traceroute (hops) data.

Gets the port to use to collect traceroute (hops) data.

Sets the state indicating whether the dynamic load balancing modes can use path data even after the TTL for the path data has expired.

Gets the state indicating whether the dynamic load balancing modes can use path data even after the TTL for the path data has expired..

Sets the LDNS probe protocols. The order of the protocols in the sequence will be used to indicate the preferred protocols, i.e. the first protocol in the sequence is the most preferred protocol. If you'd like to remove an item, get the LDNS probe protocols, remove the item, then do set.

Gets the LDNS probe protocols. The order of the protocols in the sequence will be used to indicate the preferred protocols, i.e. the first protocol in the sequence is the most preferred protocol.

Sets the state that if enabled, GTM will still probe disabled object.

Gets the state that if enabled, GTM will still probe disabled object.

Sets the link limit factor, which is used to set a target percentage for traffic. For example, if it is set to 90, the ratio cost based load-balancing will set a ratio with a maximum value equal to 90% of the limit value for the link. Default is 95%.

Gets the link limit factor, which is used to set a target percentage for traffic. For example, if it is set to 90, the ratio cost based load-balancing will set a ratio with a maximum value equal to 90% of the limit value for the link. Default is 95%.

Sets the over-limit link limit factor. If traffic on a link exceeds the limit, this factor will be used instead of the link_limit_factor until the traffic is over limit for more than max_link_over_limit_count times. Once the limit has been exceeded too many times, all traffic is shut off for the link. The default for over_limit_link_limit_factor is 90%.

Gets the over-limit link limit factor. If traffic on a link exceeds the limit, this factor will be used instead of the link_limit_factor until the traffic is over limit for more than max_link_over_limit_count times. Once the limit has been exceeded too many times, all traffic is shut off for the link. The default for over_limit_link_limit_factor is 90%.

Sets the link prepaid factor. Maximum percentage of traffic allocated to link which has a traffic allotment which has been prepaid. Default is 95%.

Gets the link prepaid factor. Maximum percentage of traffic allocated to link which has a traffic allotment which has been prepaid. Default is 95%.

Sets the link compensate inbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to inbound traffic which the major volume will initiate from internal clients.

Gets the link compensate inbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to inbound traffic which the major volume will initiate from internal clients.

Sets the link compensate outbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to outbound traffic which the major volume will initiate from internal clients.

Gets the link compensate outbound state. If set, the link allotment calculation will take into account traffic which does not flow through the BIGIP, i.e. if more traffic is flowing through a link as measured by SNMP on the router than is flowing through the BIGIP. This applies to outbound traffic which the major volume will initiate from internal clients.

Sets the link compensation history.

Gets the link compensation history.

Sets the maximum link over limit count. The count of how many times in a row traffic may be over the defined limit for the link before it is shut off entirely. Default is 1.

Gets the maximum link over limit count. The count of how many times in a row traffic may be over the defined limit for the link before it is shut off entirely. Default is 1.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the lower bound percentage row options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the lower bound percentage row options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Sets the lower bound percentage column options in Internet Weather Map.

This method is deprecated (immediately) and should not be used. It has never been functional. Gets the lower bound percentage column options in Internet Weather Map.

Sets the timeout, in seconds, indicating how long to wait before automatically saving the GTM configuration to the bigip_gtm.conf file after a change is made to the GTM configuration. Setting this timeout to -1 will cause the GTM configuration to NEVER be saved. Setting this timeout to 0 will cause the GTM configuration to be saved immediately. Setting this timeout to a value N, greater than 0, will cause the GTM configuration to be saved to bigip_gtm.conf no fewer than N seconds after a configuration change is made.

Gets the timeout, in seconds, indicating how long to wait before automatically saving the GTM configuration to the bigip_gtm.conf file after a change is made to the GTM configuration.

Sets the state indicating whether to auto configure BIGIP/3DNS servers (automatic addition and deletion of self IPs and virtual servers.

Gets the state indicating whether to auto configure BIGIP/3DNS servers (automatic addition and deletion of self IPs and virtual servers.

Sets the state to indicate whether to autosync. Allows automatic updates of wideip.conf to/from other 3-DNSes.

Gets the state to indicate whether to autosync. Allows automatic updates of wideip.conf to/from other 3-DNSes.

Sets the state to indicate whether to auto-synchronize named configuration. Allows automatic updates of named.conf to/from other 3-DNSes.

Gets the state to indicate whether to auto_synchronize named configuration. Allows automatic updates of named.conf to/from other 3-DNSes.

Sets the sync group name.

Gets the sync group name.

Sets the sync timeout. If synch'ing from a remote 3-DNS takes longer than this timeout, then abort the connection.

Gets the sync timeout. If synch'ing from a remote 3-DNS takes longer than this timeout, then abort the connection.

Sets the sync zones timeout. If synch'ing named and zone configuration takes this timeout, then abort the connection.

Gets the sync zones timeout. If synch'ing named and zone configuration takes this timeout, then abort the connection.

Sets the allowable time difference for data to be out of sync between members of a sync group.

Gets the allowable time difference for data to be out of sync between members of a sync group.

Sets the state to indicate whether the 3-DNS Controller selects the topology record that is most specific and, thus, has the longest match, in cases where there are several IP/netmask items that match a particular IP address. If you select No, the 3-DNS Controller uses the first topology record that matches (according to the order of entry) in the topology statement.

Gets the state to indicate whether the 3-DNS Controller selects the topology record that is most specific and, thus, has the longest match, in cases where there are several IP/netmask items that match a particular IP address. If you select No, the 3-DNS Controller uses the first topology record that matches (according to the order of entry) in the topology statement.

Sets the state to indicate whether the system marks a virtual server down when the server on which the virtual server is configured can no longer be reached via iQuery. The default value is enabled.

Gets the state to indicate whether the system marks a virtual server down when the server on which the virtual server is configured can no longer be reached via iQuery.

This method is deprecated (immediately) and should not be used. Please enable/disable pool members directly if desired. Sets the threshold for the topology ACL.

This method is deprecated (immediately) and should not be used. Please enable/disable pool members directly if desired. Gets the threshold for the topology ACL.

Sets the state to propagate wild card A records for wild card wide IP records. DNS allows wildcard entries in the form of "*.zone.com". Best practices indicate that using wild cards for A records may have unintended consequences. This results in a NXDOMAIN responses, which is valid and correct. The only valid DNS wild card is in the form of "*.zone.com". The entire leftmost term must be "*" and ONLY "*". There must be no other "*" in the name. So not every GTM supported wild card will be propagated to DNS. DNS wild cards of the following forms will be propagated: "*.zone.com". The following will not: "*part.zone.com", "part*.zone.com", "part.*.zone.com", "p?rt.zone.com". There is a workaround without setting this swtich - entering wild card records manually through ZRD.

Gets the state to propagate wild card A records for wild card wide IP records.

Sets the peer leader, the name of the GTM responsible for creating new DNSSEC keys.

Gets the peer leader, the name of the GTM responsible for creating new DNSSEC keys.

Sets the state to indicate whether GTM forwards the availability status of objects (Wide IP, Application, Link, Data Center, Server, Virtual Server, Pool, Pool Member, Prober Pool, Prober Pool Member) to the subscribers. This enables the iControl clients to receive event notifications for the availability status changes.

Gets the state to indicate whether the GTM forwards the availability status of objects to the subscribers.

Gets the version information for this interface.

The Globals interface enables you to set and get global variables.