]].\n var optionsProp = options['[[' + _property + ']]'];\n\n // ii. Let formatPropDesc be the result of calling the [[GetOwnProperty]] internal method of format\n // with argument property.\n // iii. If formatPropDesc is not undefined, then\n // 1. Let formatProp be the result of calling the [[Get]] internal method of format with argument property.\n var formatProp = hop.call(format, _property) ? format[_property] : undefined;\n\n // Diverging: using the default properties produced by the pattern/skeleton\n // to match it with user options, and apply a penalty\n var patternProp = hop.call(format._, _property) ? format._[_property] : undefined;\n if (optionsProp !== patternProp) {\n score -= patternPenalty;\n }\n\n // iv. If optionsProp is undefined and formatProp is not undefined, then decrease score by\n // additionPenalty.\n if (optionsProp === undefined && formatProp !== undefined) score -= additionPenalty;\n\n // v. Else if optionsProp is not undefined and formatProp is undefined, then decrease score by\n // removalPenalty.\n else if (optionsProp !== undefined && formatProp === undefined) score -= removalPenalty;\n\n // vi. Else\n else {\n // 1. Let values be the array [\"2-digit\", \"numeric\", \"narrow\", \"short\",\n // \"long\"].\n var values = ['2-digit', 'numeric', 'narrow', 'short', 'long'];\n\n // 2. Let optionsPropIndex be the index of optionsProp within values.\n var optionsPropIndex = arrIndexOf.call(values, optionsProp);\n\n // 3. Let formatPropIndex be the index of formatProp within values.\n var formatPropIndex = arrIndexOf.call(values, formatProp);\n\n // 4. Let delta be max(min(formatPropIndex - optionsPropIndex, 2), -2).\n var delta = Math.max(Math.min(formatPropIndex - optionsPropIndex, 2), -2);\n\n {\n // diverging from spec\n // When the bestFit argument is true, subtract additional penalty where data types are not the same\n if (formatPropIndex <= 1 && optionsPropIndex >= 2 || formatPropIndex >= 2 && optionsPropIndex <= 1) {\n // 5. If delta = 2, decrease score by longMorePenalty.\n if (delta > 0) score -= longMorePenalty;else if (delta < 0) score -= longLessPenalty;\n } else {\n // 5. If delta = 2, decrease score by longMorePenalty.\n if (delta > 1) score -= shortMorePenalty;else if (delta < -1) score -= shortLessPenalty;\n }\n }\n }\n }\n\n {\n // diverging to also take into consideration differences between 12 or 24 hours\n // which is special for the best fit only.\n if (format._.hour12 !== options.hour12) {\n score -= hour12Penalty;\n }\n }\n\n // d. If score > bestScore, then\n if (score > bestScore) {\n // i. Let bestScore be score.\n bestScore = score;\n // ii. Let bestFormat be format.\n bestFormat = format;\n }\n\n // e. Increase i by 1.\n i++;\n }\n\n // 13. Return bestFormat.\n return bestFormat;\n}\n\n/* 12.2.3 */internals.DateTimeFormat = {\n '[[availableLocales]]': [],\n '[[relevantExtensionKeys]]': ['ca', 'nu'],\n '[[localeData]]': {}\n};\n\n/**\n * When the supportedLocalesOf method of Intl.DateTimeFormat is called, the\n * following steps are taken:\n */\n/* 12.2.2 */\ndefineProperty(Intl.DateTimeFormat, 'supportedLocalesOf', {\n configurable: true,\n writable: true,\n value: fnBind.call(function (locales) {\n // Bound functions only have the `this` value altered if being used as a constructor,\n // this lets us imitate a native function that has no constructor\n if (!hop.call(this, '[[availableLocales]]')) throw new TypeError('supportedLocalesOf() is not a constructor');\n\n // Create an object whose props can be used to restore the values of RegExp props\n var regexpRestore = createRegExpRestore(),\n\n\n // 1. If options is not provided, then let options be undefined.\n options = arguments[1],\n\n\n // 2. Let availableLocales be the value of the [[availableLocales]] internal\n // property of the standard built-in object that is the initial value of\n // Intl.NumberFormat.\n\n availableLocales = this['[[availableLocales]]'],\n\n\n // 3. Let requestedLocales be the result of calling the CanonicalizeLocaleList\n // abstract operation (defined in 9.2.1) with argument locales.\n requestedLocales = CanonicalizeLocaleList(locales);\n\n // Restore the RegExp properties\n regexpRestore();\n\n // 4. Return the result of calling the SupportedLocales abstract operation\n // (defined in 9.2.8) with arguments availableLocales, requestedLocales,\n // and options.\n return SupportedLocales(availableLocales, requestedLocales, options);\n }, internals.NumberFormat)\n});\n\n/**\n * This named accessor property returns a function that formats a number\n * according to the effective locale and the formatting options of this\n * DateTimeFormat object.\n */\n/* 12.3.2 */defineProperty(Intl.DateTimeFormat.prototype, 'format', {\n configurable: true,\n get: GetFormatDateTime\n});\n\nfunction GetFormatDateTime() {\n var internal = this !== null && babelHelpers$1[\"typeof\"](this) === 'object' && getInternalProperties(this);\n\n // Satisfy test 12.3_b\n if (!internal || !internal['[[initializedDateTimeFormat]]']) throw new TypeError('`this` value for format() is not an initialized Intl.DateTimeFormat object.');\n\n // The value of the [[Get]] attribute is a function that takes the following\n // steps:\n\n // 1. If the [[boundFormat]] internal property of this DateTimeFormat object\n // is undefined, then:\n if (internal['[[boundFormat]]'] === undefined) {\n // a. Let F be a Function object, with internal properties set as\n // specified for built-in functions in ES5, 15, or successor, and the\n // length property set to 0, that takes the argument date and\n // performs the following steps:\n var F = function F() {\n var date = arguments.length <= 0 || arguments[0] === undefined ? undefined : arguments[0];\n\n // i. If date is not provided or is undefined, then let x be the\n // result as if by the expression Date.now() where Date.now is\n // the standard built-in function defined in ES5, 15.9.4.4.\n // ii. Else let x be ToNumber(date).\n // iii. Return the result of calling the FormatDateTime abstract\n // operation (defined below) with arguments this and x.\n var x = date === undefined ? Date.now() : toNumber(date);\n return FormatDateTime(this, x);\n };\n // b. Let bind be the standard built-in function object defined in ES5,\n // 15.3.4.5.\n // c. Let bf be the result of calling the [[Call]] internal method of\n // bind with F as the this value and an argument list containing\n // the single item this.\n var bf = fnBind.call(F, this);\n // d. Set the [[boundFormat]] internal property of this NumberFormat\n // object to bf.\n internal['[[boundFormat]]'] = bf;\n }\n // Return the value of the [[boundFormat]] internal property of this\n // NumberFormat object.\n return internal['[[boundFormat]]'];\n}\n\nfunction formatToParts$1() {\n var date = arguments.length <= 0 || arguments[0] === undefined ? undefined : arguments[0];\n\n var internal = this !== null && babelHelpers$1[\"typeof\"](this) === 'object' && getInternalProperties(this);\n\n if (!internal || !internal['[[initializedDateTimeFormat]]']) throw new TypeError('`this` value for formatToParts() is not an initialized Intl.DateTimeFormat object.');\n\n var x = date === undefined ? Date.now() : toNumber(date);\n return FormatToPartsDateTime(this, x);\n}\n\nObject.defineProperty(Intl.DateTimeFormat.prototype, 'formatToParts', {\n enumerable: false,\n writable: true,\n configurable: true,\n value: formatToParts$1\n});\n\nfunction CreateDateTimeParts(dateTimeFormat, x) {\n // 1. If x is not a finite Number, then throw a RangeError exception.\n if (!isFinite(x)) throw new RangeError('Invalid valid date passed to format');\n\n var internal = dateTimeFormat.__getInternalProperties(secret);\n\n // Creating restore point for properties on the RegExp object... please wait\n /* let regexpRestore = */createRegExpRestore(); // ###TODO: review this\n\n // 2. Let locale be the value of the [[locale]] internal property of dateTimeFormat.\n var locale = internal['[[locale]]'];\n\n // 3. Let nf be the result of creating a new NumberFormat object as if by the\n // expression new Intl.NumberFormat([locale], {useGrouping: false}) where\n // Intl.NumberFormat is the standard built-in constructor defined in 11.1.3.\n var nf = new Intl.NumberFormat([locale], { useGrouping: false });\n\n // 4. Let nf2 be the result of creating a new NumberFormat object as if by the\n // expression new Intl.NumberFormat([locale], {minimumIntegerDigits: 2, useGrouping:\n // false}) where Intl.NumberFormat is the standard built-in constructor defined in\n // 11.1.3.\n var nf2 = new Intl.NumberFormat([locale], { minimumIntegerDigits: 2, useGrouping: false });\n\n // 5. Let tm be the result of calling the ToLocalTime abstract operation (defined\n // below) with x, the value of the [[calendar]] internal property of dateTimeFormat,\n // and the value of the [[timeZone]] internal property of dateTimeFormat.\n var tm = ToLocalTime(x, internal['[[calendar]]'], internal['[[timeZone]]']);\n\n // 6. Let result be the value of the [[pattern]] internal property of dateTimeFormat.\n var pattern = internal['[[pattern]]'];\n\n // 7.\n var result = new List();\n\n // 8.\n var index = 0;\n\n // 9.\n var beginIndex = pattern.indexOf('{');\n\n // 10.\n var endIndex = 0;\n\n // Need the locale minus any extensions\n var dataLocale = internal['[[dataLocale]]'];\n\n // Need the calendar data from CLDR\n var localeData = internals.DateTimeFormat['[[localeData]]'][dataLocale].calendars;\n var ca = internal['[[calendar]]'];\n\n // 11.\n while (beginIndex !== -1) {\n var fv = void 0;\n // a.\n endIndex = pattern.indexOf('}', beginIndex);\n // b.\n if (endIndex === -1) {\n throw new Error('Unclosed pattern');\n }\n // c.\n if (beginIndex > index) {\n arrPush.call(result, {\n type: 'literal',\n value: pattern.substring(index, beginIndex)\n });\n }\n // d.\n var p = pattern.substring(beginIndex + 1, endIndex);\n // e.\n if (dateTimeComponents.hasOwnProperty(p)) {\n // i. Let f be the value of the [[]] internal property of dateTimeFormat.\n var f = internal['[[' + p + ']]'];\n // ii. Let v be the value of tm.[[
]].\n var v = tm['[[' + p + ']]'];\n // iii. If p is \"year\" and v ≤ 0, then let v be 1 - v.\n if (p === 'year' && v <= 0) {\n v = 1 - v;\n }\n // iv. If p is \"month\", then increase v by 1.\n else if (p === 'month') {\n v++;\n }\n // v. If p is \"hour\" and the value of the [[hour12]] internal property of\n // dateTimeFormat is true, then\n else if (p === 'hour' && internal['[[hour12]]'] === true) {\n // 1. Let v be v modulo 12.\n v = v % 12;\n // 2. If v is 0 and the value of the [[hourNo0]] internal property of\n // dateTimeFormat is true, then let v be 12.\n if (v === 0 && internal['[[hourNo0]]'] === true) {\n v = 12;\n }\n }\n\n // vi. If f is \"numeric\", then\n if (f === 'numeric') {\n // 1. Let fv be the result of calling the FormatNumber abstract operation\n // (defined in 11.3.2) with arguments nf and v.\n fv = FormatNumber(nf, v);\n }\n // vii. Else if f is \"2-digit\", then\n else if (f === '2-digit') {\n // 1. Let fv be the result of calling the FormatNumber abstract operation\n // with arguments nf2 and v.\n fv = FormatNumber(nf2, v);\n // 2. If the length of fv is greater than 2, let fv be the substring of fv\n // containing the last two characters.\n if (fv.length > 2) {\n fv = fv.slice(-2);\n }\n }\n // viii. Else if f is \"narrow\", \"short\", or \"long\", then let fv be a String\n // value representing f in the desired form; the String value depends upon\n // the implementation and the effective locale and calendar of\n // dateTimeFormat. If p is \"month\", then the String value may also depend\n // on whether dateTimeFormat has a [[day]] internal property. If p is\n // \"timeZoneName\", then the String value may also depend on the value of\n // the [[inDST]] field of tm.\n else if (f in dateWidths) {\n switch (p) {\n case 'month':\n fv = resolveDateString(localeData, ca, 'months', f, tm['[[' + p + ']]']);\n break;\n\n case 'weekday':\n try {\n fv = resolveDateString(localeData, ca, 'days', f, tm['[[' + p + ']]']);\n // fv = resolveDateString(ca.days, f)[tm['[['+ p +']]']];\n } catch (e) {\n throw new Error('Could not find weekday data for locale ' + locale);\n }\n break;\n\n case 'timeZoneName':\n fv = ''; // ###TODO\n break;\n\n case 'era':\n try {\n fv = resolveDateString(localeData, ca, 'eras', f, tm['[[' + p + ']]']);\n } catch (e) {\n throw new Error('Could not find era data for locale ' + locale);\n }\n break;\n\n default:\n fv = tm['[[' + p + ']]'];\n }\n }\n // ix\n arrPush.call(result, {\n type: p,\n value: fv\n });\n // f.\n } else if (p === 'ampm') {\n // i.\n var _v = tm['[[hour]]'];\n // ii./iii.\n fv = resolveDateString(localeData, ca, 'dayPeriods', _v > 11 ? 'pm' : 'am', null);\n // iv.\n arrPush.call(result, {\n type: 'dayPeriod',\n value: fv\n });\n // g.\n } else {\n arrPush.call(result, {\n type: 'literal',\n value: pattern.substring(beginIndex, endIndex + 1)\n });\n }\n // h.\n index = endIndex + 1;\n // i.\n beginIndex = pattern.indexOf('{', index);\n }\n // 12.\n if (endIndex < pattern.length - 1) {\n arrPush.call(result, {\n type: 'literal',\n value: pattern.substr(endIndex + 1)\n });\n }\n // 13.\n return result;\n}\n\n/**\n * When the FormatDateTime abstract operation is called with arguments dateTimeFormat\n * (which must be an object initialized as a DateTimeFormat) and x (which must be a Number\n * value), it returns a String value representing x (interpreted as a time value as\n * specified in ES5, 15.9.1.1) according to the effective locale and the formatting\n * options of dateTimeFormat.\n */\nfunction FormatDateTime(dateTimeFormat, x) {\n var parts = CreateDateTimeParts(dateTimeFormat, x);\n var result = '';\n\n for (var i = 0; parts.length > i; i++) {\n var part = parts[i];\n result += part.value;\n }\n return result;\n}\n\nfunction FormatToPartsDateTime(dateTimeFormat, x) {\n var parts = CreateDateTimeParts(dateTimeFormat, x);\n var result = [];\n for (var i = 0; parts.length > i; i++) {\n var part = parts[i];\n result.push({\n type: part.type,\n value: part.value\n });\n }\n return result;\n}\n\n/**\n * When the ToLocalTime abstract operation is called with arguments date, calendar, and\n * timeZone, the following steps are taken:\n */\nfunction ToLocalTime(date, calendar, timeZone) {\n // 1. Apply calendrical calculations on date for the given calendar and time zone to\n // produce weekday, era, year, month, day, hour, minute, second, and inDST values.\n // The calculations should use best available information about the specified\n // calendar and time zone. If the calendar is \"gregory\", then the calculations must\n // match the algorithms specified in ES5, 15.9.1, except that calculations are not\n // bound by the restrictions on the use of best available information on time zones\n // for local time zone adjustment and daylight saving time adjustment imposed by\n // ES5, 15.9.1.7 and 15.9.1.8.\n // ###TODO###\n var d = new Date(date),\n m = 'get' + (timeZone || '');\n\n // 2. Return a Record with fields [[weekday]], [[era]], [[year]], [[month]], [[day]],\n // [[hour]], [[minute]], [[second]], and [[inDST]], each with the corresponding\n // calculated value.\n return new Record({\n '[[weekday]]': d[m + 'Day'](),\n '[[era]]': +(d[m + 'FullYear']() >= 0),\n '[[year]]': d[m + 'FullYear'](),\n '[[month]]': d[m + 'Month'](),\n '[[day]]': d[m + 'Date'](),\n '[[hour]]': d[m + 'Hours'](),\n '[[minute]]': d[m + 'Minutes'](),\n '[[second]]': d[m + 'Seconds'](),\n '[[inDST]]': false // ###TODO###\n });\n}\n\n/**\n * The function returns a new object whose properties and attributes are set as if\n * constructed by an object literal assigning to each of the following properties the\n * value of the corresponding internal property of this DateTimeFormat object (see 12.4):\n * locale, calendar, numberingSystem, timeZone, hour12, weekday, era, year, month, day,\n * hour, minute, second, and timeZoneName. Properties whose corresponding internal\n * properties are not present are not assigned.\n */\n/* 12.3.3 */defineProperty(Intl.DateTimeFormat.prototype, 'resolvedOptions', {\n writable: true,\n configurable: true,\n value: function value() {\n var prop = void 0,\n descs = new Record(),\n props = ['locale', 'calendar', 'numberingSystem', 'timeZone', 'hour12', 'weekday', 'era', 'year', 'month', 'day', 'hour', 'minute', 'second', 'timeZoneName'],\n internal = this !== null && babelHelpers$1[\"typeof\"](this) === 'object' && getInternalProperties(this);\n\n // Satisfy test 12.3_b\n if (!internal || !internal['[[initializedDateTimeFormat]]']) throw new TypeError('`this` value for resolvedOptions() is not an initialized Intl.DateTimeFormat object.');\n\n for (var i = 0, max = props.length; i < max; i++) {\n if (hop.call(internal, prop = '[[' + props[i] + ']]')) descs[props[i]] = { value: internal[prop], writable: true, configurable: true, enumerable: true };\n }\n\n return objCreate({}, descs);\n }\n});\n\nvar ls = Intl.__localeSensitiveProtos = {\n Number: {},\n Date: {}\n};\n\n/**\n * When the toLocaleString method is called with optional arguments locales and options,\n * the following steps are taken:\n */\n/* 13.2.1 */ls.Number.toLocaleString = function () {\n // Satisfy test 13.2.1_1\n if (Object.prototype.toString.call(this) !== '[object Number]') throw new TypeError('`this` value must be a number for Number.prototype.toLocaleString()');\n\n // 1. Let x be this Number value (as defined in ES5, 15.7.4).\n // 2. If locales is not provided, then let locales be undefined.\n // 3. If options is not provided, then let options be undefined.\n // 4. Let numberFormat be the result of creating a new object as if by the\n // expression new Intl.NumberFormat(locales, options) where\n // Intl.NumberFormat is the standard built-in constructor defined in 11.1.3.\n // 5. Return the result of calling the FormatNumber abstract operation\n // (defined in 11.3.2) with arguments numberFormat and x.\n return FormatNumber(new NumberFormatConstructor(arguments[0], arguments[1]), this);\n};\n\n/**\n * When the toLocaleString method is called with optional arguments locales and options,\n * the following steps are taken:\n */\n/* 13.3.1 */ls.Date.toLocaleString = function () {\n // Satisfy test 13.3.0_1\n if (Object.prototype.toString.call(this) !== '[object Date]') throw new TypeError('`this` value must be a Date instance for Date.prototype.toLocaleString()');\n\n // 1. Let x be this time value (as defined in ES5, 15.9.5).\n var x = +this;\n\n // 2. If x is NaN, then return \"Invalid Date\".\n if (isNaN(x)) return 'Invalid Date';\n\n // 3. If locales is not provided, then let locales be undefined.\n var locales = arguments[0];\n\n // 4. If options is not provided, then let options be undefined.\n var options = arguments[1];\n\n // 5. Let options be the result of calling the ToDateTimeOptions abstract\n // operation (defined in 12.1.1) with arguments options, \"any\", and \"all\".\n options = ToDateTimeOptions(options, 'any', 'all');\n\n // 6. Let dateTimeFormat be the result of creating a new object as if by the\n // expression new Intl.DateTimeFormat(locales, options) where\n // Intl.DateTimeFormat is the standard built-in constructor defined in 12.1.3.\n var dateTimeFormat = new DateTimeFormatConstructor(locales, options);\n\n // 7. Return the result of calling the FormatDateTime abstract operation (defined\n // in 12.3.2) with arguments dateTimeFormat and x.\n return FormatDateTime(dateTimeFormat, x);\n};\n\n/**\n * When the toLocaleDateString method is called with optional arguments locales and\n * options, the following steps are taken:\n */\n/* 13.3.2 */ls.Date.toLocaleDateString = function () {\n // Satisfy test 13.3.0_1\n if (Object.prototype.toString.call(this) !== '[object Date]') throw new TypeError('`this` value must be a Date instance for Date.prototype.toLocaleDateString()');\n\n // 1. Let x be this time value (as defined in ES5, 15.9.5).\n var x = +this;\n\n // 2. If x is NaN, then return \"Invalid Date\".\n if (isNaN(x)) return 'Invalid Date';\n\n // 3. If locales is not provided, then let locales be undefined.\n var locales = arguments[0],\n\n\n // 4. If options is not provided, then let options be undefined.\n options = arguments[1];\n\n // 5. Let options be the result of calling the ToDateTimeOptions abstract\n // operation (defined in 12.1.1) with arguments options, \"date\", and \"date\".\n options = ToDateTimeOptions(options, 'date', 'date');\n\n // 6. Let dateTimeFormat be the result of creating a new object as if by the\n // expression new Intl.DateTimeFormat(locales, options) where\n // Intl.DateTimeFormat is the standard built-in constructor defined in 12.1.3.\n var dateTimeFormat = new DateTimeFormatConstructor(locales, options);\n\n // 7. Return the result of calling the FormatDateTime abstract operation (defined\n // in 12.3.2) with arguments dateTimeFormat and x.\n return FormatDateTime(dateTimeFormat, x);\n};\n\n/**\n * When the toLocaleTimeString method is called with optional arguments locales and\n * options, the following steps are taken:\n */\n/* 13.3.3 */ls.Date.toLocaleTimeString = function () {\n // Satisfy test 13.3.0_1\n if (Object.prototype.toString.call(this) !== '[object Date]') throw new TypeError('`this` value must be a Date instance for Date.prototype.toLocaleTimeString()');\n\n // 1. Let x be this time value (as defined in ES5, 15.9.5).\n var x = +this;\n\n // 2. If x is NaN, then return \"Invalid Date\".\n if (isNaN(x)) return 'Invalid Date';\n\n // 3. If locales is not provided, then let locales be undefined.\n var locales = arguments[0];\n\n // 4. If options is not provided, then let options be undefined.\n var options = arguments[1];\n\n // 5. Let options be the result of calling the ToDateTimeOptions abstract\n // operation (defined in 12.1.1) with arguments options, \"time\", and \"time\".\n options = ToDateTimeOptions(options, 'time', 'time');\n\n // 6. Let dateTimeFormat be the result of creating a new object as if by the\n // expression new Intl.DateTimeFormat(locales, options) where\n // Intl.DateTimeFormat is the standard built-in constructor defined in 12.1.3.\n var dateTimeFormat = new DateTimeFormatConstructor(locales, options);\n\n // 7. Return the result of calling the FormatDateTime abstract operation (defined\n // in 12.3.2) with arguments dateTimeFormat and x.\n return FormatDateTime(dateTimeFormat, x);\n};\n\ndefineProperty(Intl, '__applyLocaleSensitivePrototypes', {\n writable: true,\n configurable: true,\n value: function value() {\n defineProperty(Number.prototype, 'toLocaleString', { writable: true, configurable: true, value: ls.Number.toLocaleString });\n // Need this here for IE 8, to avoid the _DontEnum_ bug\n defineProperty(Date.prototype, 'toLocaleString', { writable: true, configurable: true, value: ls.Date.toLocaleString });\n\n for (var k in ls.Date) {\n if (hop.call(ls.Date, k)) defineProperty(Date.prototype, k, { writable: true, configurable: true, value: ls.Date[k] });\n }\n }\n});\n\n/**\n * Can't really ship a single script with data for hundreds of locales, so we provide\n * this __addLocaleData method as a means for the developer to add the data on an\n * as-needed basis\n */\ndefineProperty(Intl, '__addLocaleData', {\n value: function value(data) {\n if (!IsStructurallyValidLanguageTag(data.locale)) throw new Error(\"Object passed doesn't identify itself with a valid language tag\");\n\n addLocaleData(data, data.locale);\n }\n});\n\nfunction addLocaleData(data, tag) {\n // Both NumberFormat and DateTimeFormat require number data, so throw if it isn't present\n if (!data.number) throw new Error(\"Object passed doesn't contain locale data for Intl.NumberFormat\");\n\n var locale = void 0,\n locales = [tag],\n parts = tag.split('-');\n\n // Create fallbacks for locale data with scripts, e.g. Latn, Hans, Vaii, etc\n if (parts.length > 2 && parts[1].length === 4) arrPush.call(locales, parts[0] + '-' + parts[2]);\n\n while (locale = arrShift.call(locales)) {\n // Add to NumberFormat internal properties as per 11.2.3\n arrPush.call(internals.NumberFormat['[[availableLocales]]'], locale);\n internals.NumberFormat['[[localeData]]'][locale] = data.number;\n\n // ...and DateTimeFormat internal properties as per 12.2.3\n if (data.date) {\n data.date.nu = data.number.nu;\n arrPush.call(internals.DateTimeFormat['[[availableLocales]]'], locale);\n internals.DateTimeFormat['[[localeData]]'][locale] = data.date;\n }\n }\n\n // If this is the first set of locale data added, make it the default\n if (defaultLocale === undefined) setDefaultLocale(tag);\n}\n\ndefineProperty(Intl, '__disableRegExpRestore', {\n value: function value() {\n internals.disableRegExpRestore = true;\n }\n});\n\nmodule.exports = Intl;","// Expose `IntlPolyfill` as global to add locale data into runtime later on.\nglobal.IntlPolyfill = require('./lib/core.js');\n\n// Require all locale data for `Intl`. This module will be\n// ignored when bundling for the browser with Browserify/Webpack.\nrequire('./locale-data/complete.js');\n\n// hack to export the polyfill as global Intl if needed\nif (!global.Intl) {\n global.Intl = global.IntlPolyfill;\n global.IntlPolyfill.__applyLocaleSensitivePrototypes();\n}\n\n// providing an idiomatic api for the nodejs version of this module\nmodule.exports = global.IntlPolyfill;\n","if (!window.fetch) window.fetch = require('.').default || require('.');\n","module.exports = function(originalModule) {\r\n\tif (!originalModule.webpackPolyfill) {\r\n\t\tvar module = Object.create(originalModule);\r\n\t\t// module.parent = undefined by default\r\n\t\tif (!module.children) module.children = [];\r\n\t\tObject.defineProperty(module, \"loaded\", {\r\n\t\t\tenumerable: true,\r\n\t\t\tget: function() {\r\n\t\t\t\treturn module.l;\r\n\t\t\t}\r\n\t\t});\r\n\t\tObject.defineProperty(module, \"id\", {\r\n\t\t\tenumerable: true,\r\n\t\t\tget: function() {\r\n\t\t\t\treturn module.i;\r\n\t\t\t}\r\n\t\t});\r\n\t\tObject.defineProperty(module, \"exports\", {\r\n\t\t\tenumerable: true\r\n\t\t});\r\n\t\tmodule.webpackPolyfill = 1;\r\n\t}\r\n\treturn module;\r\n};\r\n","'use strict'; (function(fn, name) { if (typeof exports !== \"undefined\") { fn(exports, module); } else if (typeof self !== \"undefined\") { var e = name === \"*\" ? self : (name ? self[name] = {} : {}); fn(e, { exports: e }); } })(function(exports, module) { // === Symbol Support ===\n\nfunction hasSymbol(name) {\n return typeof Symbol === \"function\" && Boolean(Symbol[name]);\n}\n\nfunction getSymbol(name) {\n return hasSymbol(name) ? Symbol[name] : \"@@\" + name;\n}\n\n// Ponyfill Symbol.observable for interoperability with other libraries\nif (typeof Symbol === \"function\" && !Symbol.observable) {\n Symbol.observable = Symbol(\"observable\");\n}\n\n// === Abstract Operations ===\n\nfunction hostReportError(e) {\n setTimeout(function() { throw e });\n}\n\nfunction getMethod(obj, key) {\n var value = obj[key];\n\n if (value == null)\n return undefined;\n\n if (typeof value !== \"function\")\n throw new TypeError(value + \" is not a function\");\n\n return value;\n}\n\nfunction getSpecies(obj) {\n var ctor = obj.constructor;\n if (ctor !== undefined) {\n ctor = ctor[getSymbol(\"species\")];\n if (ctor === null) {\n ctor = undefined;\n }\n }\n return ctor !== undefined ? ctor : Observable;\n}\n\nfunction addMethods(target, methods) {\n Object.keys(methods).forEach(function(k) {\n var desc = Object.getOwnPropertyDescriptor(methods, k);\n desc.enumerable = false;\n Object.defineProperty(target, k, desc);\n });\n}\n\nfunction cleanupSubscription(subscription) {\n // Assert: observer._observer is undefined\n\n var cleanup = subscription._cleanup;\n\n if (!cleanup)\n return;\n\n // Drop the reference to the cleanup function so that we won't call it\n // more than once\n subscription._cleanup = undefined;\n\n // Call the cleanup function\n try { cleanup() }\n catch (e) { hostReportError(e) }\n}\n\nfunction subscriptionClosed(subscription) {\n return subscription._observer === undefined;\n}\n\nfunction closeSubscription(subscription) {\n if (subscriptionClosed(subscription))\n return;\n\n subscription._observer = undefined;\n cleanupSubscription(subscription);\n}\n\nfunction cleanupFromSubscription(subscription) {\n return function() { subscription.unsubscribe() };\n}\n\nfunction Subscription(observer, subscriber) {\n // Assert: subscriber is callable\n\n // The observer must be an object\n if (Object(observer) !== observer)\n throw new TypeError(\"Observer must be an object\");\n\n this._cleanup = undefined;\n this._observer = observer;\n\n try {\n var start$0 = getMethod(observer, \"start\");\n if (start$0) start$0.call(observer, this);\n } catch (e) {\n hostReportError(e);\n }\n\n if (subscriptionClosed(this))\n return;\n\n observer = new SubscriptionObserver(this);\n\n try {\n // Call the subscriber function\n var cleanup$0 = subscriber.call(undefined, observer);\n\n // The return value must be undefined, null, a subscription object, or a function\n if (cleanup$0 != null) {\n if (typeof cleanup$0.unsubscribe === \"function\")\n cleanup$0 = cleanupFromSubscription(cleanup$0);\n else if (typeof cleanup$0 !== \"function\")\n throw new TypeError(cleanup$0 + \" is not a function\");\n\n this._cleanup = cleanup$0;\n }\n } catch (e) {\n // If an error occurs during startup, then attempt to send the error\n // to the observer\n observer.error(e);\n return;\n }\n\n // If the stream is already finished, then perform cleanup\n if (subscriptionClosed(this))\n cleanupSubscription(this);\n}\n\naddMethods(Subscription.prototype = {}, {\n get closed() { return subscriptionClosed(this) },\n unsubscribe: function() { closeSubscription(this) },\n});\n\nfunction SubscriptionObserver(subscription) {\n this._subscription = subscription;\n}\n\naddMethods(SubscriptionObserver.prototype = {}, {\n\n get closed() { return subscriptionClosed(this._subscription) },\n\n next: function(value) {\n var subscription = this._subscription;\n\n // If the stream is closed, then return undefined\n if (subscriptionClosed(subscription))\n return;\n\n var observer = subscription._observer;\n\n try {\n // If the observer has a \"next\" method, send the next value\n var m$0 = getMethod(observer, \"next\");\n if (m$0) m$0.call(observer, value);\n } catch (e) {\n hostReportError(e);\n }\n },\n\n error: function(value) {\n var subscription = this._subscription;\n\n // If the stream is closed, throw the error to the caller\n if (subscriptionClosed(subscription)) {\n hostReportError(value);\n return;\n }\n\n var observer = subscription._observer;\n subscription._observer = undefined;\n\n try {\n var m$1 = getMethod(observer, \"error\");\n if (m$1) m$1.call(observer, value);\n else throw value;\n } catch (e) {\n hostReportError(e);\n }\n\n cleanupSubscription(subscription);\n },\n\n complete: function() {\n var subscription = this._subscription;\n\n if (subscriptionClosed(subscription))\n return;\n\n var observer = subscription._observer;\n subscription._observer = undefined;\n\n try {\n var m$2 = getMethod(observer, \"complete\");\n if (m$2) m$2.call(observer);\n } catch (e) {\n hostReportError(e);\n }\n\n cleanupSubscription(subscription);\n },\n\n});\n\nfunction Observable(subscriber) {\n // Constructor cannot be called as a function\n if (!(this instanceof Observable))\n throw new TypeError(\"Observable cannot be called as a function\");\n\n // The stream subscriber must be a function\n if (typeof subscriber !== \"function\")\n throw new TypeError(\"Observable initializer must be a function\");\n\n this._subscriber = subscriber;\n}\n\naddMethods(Observable.prototype, {\n\n subscribe: function(observer) { for (var args = [], __$0 = 1; __$0 < arguments.length; ++__$0) args.push(arguments[__$0]); \n if (typeof observer === 'function') {\n observer = {\n next: observer,\n error: args[0],\n complete: args[1],\n };\n } else if (typeof observer !== 'object' || observer === null) {\n observer = {};\n }\n\n return new Subscription(observer, this._subscriber);\n },\n\n forEach: function(fn) { var __this = this; \n return new Promise(function(resolve, reject) {\n if (typeof fn !== \"function\")\n return Promise.reject(new TypeError(fn + \" is not a function\"));\n\n __this.subscribe({\n _subscription: null,\n\n start: function(subscription) {\n if (Object(subscription) !== subscription)\n throw new TypeError(subscription + \" is not an object\");\n\n this._subscription = subscription;\n },\n\n next: function(value) {\n var subscription = this._subscription;\n\n if (subscription.closed)\n return;\n\n try {\n fn(value);\n } catch (err) {\n reject(err);\n subscription.unsubscribe();\n }\n },\n\n error: reject,\n complete: resolve,\n });\n });\n },\n\n map: function(fn) { var __this = this; \n if (typeof fn !== \"function\")\n throw new TypeError(fn + \" is not a function\");\n\n var C = getSpecies(this);\n\n return new C(function(observer) { return __this.subscribe({\n next: function(value) {\n if (observer.closed)\n return;\n\n try { value = fn(value) }\n catch (e) { return observer.error(e) }\n\n observer.next(value);\n },\n\n error: function(e) { observer.error(e) },\n complete: function() { observer.complete() },\n }); });\n },\n\n filter: function(fn) { var __this = this; \n if (typeof fn !== \"function\")\n throw new TypeError(fn + \" is not a function\");\n\n var C = getSpecies(this);\n\n return new C(function(observer) { return __this.subscribe({\n next: function(value) {\n if (observer.closed)\n return;\n\n try { if (!fn(value)) return }\n catch (e) { return observer.error(e) }\n\n observer.next(value);\n },\n\n error: function(e) { observer.error(e) },\n complete: function() { observer.complete() },\n }); });\n },\n\n reduce: function(fn) { var __this = this; \n if (typeof fn !== \"function\")\n throw new TypeError(fn + \" is not a function\");\n\n var C = getSpecies(this);\n var hasSeed = arguments.length > 1;\n var hasValue = false;\n var seed = arguments[1];\n var acc = seed;\n\n return new C(function(observer) { return __this.subscribe({\n\n next: function(value) {\n if (observer.closed)\n return;\n\n var first = !hasValue;\n hasValue = true;\n\n if (!first || hasSeed) {\n try { acc = fn(acc, value) }\n catch (e) { return observer.error(e) }\n } else {\n acc = value;\n }\n },\n\n error: function(e) { observer.error(e) },\n\n complete: function() {\n if (!hasValue && !hasSeed) {\n return observer.error(new TypeError(\"Cannot reduce an empty sequence\"));\n }\n\n observer.next(acc);\n observer.complete();\n },\n\n }); });\n },\n\n});\n\nObject.defineProperty(Observable.prototype, getSymbol(\"observable\"), {\n value: function() { return this },\n writable: true,\n configurable: true,\n});\n\naddMethods(Observable, {\n\n from: function(x) {\n var C = typeof this === \"function\" ? this : Observable;\n\n if (x == null)\n throw new TypeError(x + \" is not an object\");\n\n var method = getMethod(x, getSymbol(\"observable\"));\n\n if (method) {\n var observable$0 = method.call(x);\n\n if (Object(observable$0) !== observable$0)\n throw new TypeError(observable$0 + \" is not an object\");\n\n if (observable$0.constructor === C)\n return observable$0;\n\n return new C(function(observer) { return observable$0.subscribe(observer); });\n }\n\n if (hasSymbol(\"iterator\") && (method = getMethod(x, getSymbol(\"iterator\")))) {\n return new C(function(observer) {\n for (var __$0 = (method.call(x))[Symbol.iterator](), __$1; __$1 = __$0.next(), !__$1.done;) { var item$0 = __$1.value; \n observer.next(item$0);\n if (observer.closed)\n return;\n }\n\n observer.complete();\n });\n }\n\n if (Array.isArray(x)) {\n return new C(function(observer) {\n for (var i$0 = 0; i$0 < x.length; ++i$0) {\n observer.next(x[i$0]);\n if (observer.closed)\n return;\n }\n\n observer.complete();\n });\n }\n\n throw new TypeError(x + \" is not observable\");\n },\n\n of: function() { for (var items = [], __$0 = 0; __$0 < arguments.length; ++__$0) items.push(arguments[__$0]); \n var C = typeof this === \"function\" ? this : Observable;\n\n return new C(function(observer) {\n for (var i$1 = 0; i$1 < items.length; ++i$1) {\n observer.next(items[i$1]);\n if (observer.closed)\n return;\n }\n\n observer.complete();\n });\n },\n\n});\n\nObject.defineProperty(Observable, getSymbol(\"species\"), {\n get: function() { return this },\n configurable: true,\n});\n\nObject.defineProperty(Observable, \"extensions\", {\n value: {\n observableSymbol: getSymbol(\"observable\"),\n setHostReportError: function(fn) { hostReportError = fn },\n },\n});\n\nexports.Observable = Observable;\n\n\n}, \"*\");","module.exports = require(\"./zen-observable.js\").Observable;\n","'use strict';\n\nObject.defineProperty(exports, \"__esModule\", {\n value: true\n});\nexports.visit = visit;\nexports.visitInParallel = visitInParallel;\nexports.visitWithTypeInfo = visitWithTypeInfo;\nexports.getVisitFn = getVisitFn;\n\n\n/**\n * A visitor is comprised of visit functions, which are called on each node\n * during the visitor's traversal.\n */\n\n\n/**\n * A visitor is provided to visit, it contains the collection of\n * relevant functions to be called during the visitor's traversal.\n */\n/**\n * Copyright (c) 2015-present, Facebook, Inc.\n *\n * This source code is licensed under the MIT license found in the\n * LICENSE file in the root directory of this source tree.\n *\n * strict\n */\n\nvar QueryDocumentKeys = exports.QueryDocumentKeys = {\n Name: [],\n\n Document: ['definitions'],\n OperationDefinition: ['name', 'variableDefinitions', 'directives', 'selectionSet'],\n VariableDefinition: ['variable', 'type', 'defaultValue'],\n Variable: ['name'],\n SelectionSet: ['selections'],\n Field: ['alias', 'name', 'arguments', 'directives', 'selectionSet'],\n Argument: ['name', 'value'],\n\n FragmentSpread: ['name', 'directives'],\n InlineFragment: ['typeCondition', 'directives', 'selectionSet'],\n FragmentDefinition: ['name',\n // Note: fragment variable definitions are experimental and may be changed\n // or removed in the future.\n 'variableDefinitions', 'typeCondition', 'directives', 'selectionSet'],\n\n IntValue: [],\n FloatValue: [],\n StringValue: [],\n BooleanValue: [],\n NullValue: [],\n EnumValue: [],\n ListValue: ['values'],\n ObjectValue: ['fields'],\n ObjectField: ['name', 'value'],\n\n Directive: ['name', 'arguments'],\n\n NamedType: ['name'],\n ListType: ['type'],\n NonNullType: ['type'],\n\n SchemaDefinition: ['directives', 'operationTypes'],\n OperationTypeDefinition: ['type'],\n\n ScalarTypeDefinition: ['description', 'name', 'directives'],\n ObjectTypeDefinition: ['description', 'name', 'interfaces', 'directives', 'fields'],\n FieldDefinition: ['description', 'name', 'arguments', 'type', 'directives'],\n InputValueDefinition: ['description', 'name', 'type', 'defaultValue', 'directives'],\n InterfaceTypeDefinition: ['description', 'name', 'directives', 'fields'],\n UnionTypeDefinition: ['description', 'name', 'directives', 'types'],\n EnumTypeDefinition: ['description', 'name', 'directives', 'values'],\n EnumValueDefinition: ['description', 'name', 'directives'],\n InputObjectTypeDefinition: ['description', 'name', 'directives', 'fields'],\n\n ScalarTypeExtension: ['name', 'directives'],\n ObjectTypeExtension: ['name', 'interfaces', 'directives', 'fields'],\n InterfaceTypeExtension: ['name', 'directives', 'fields'],\n UnionTypeExtension: ['name', 'directives', 'types'],\n EnumTypeExtension: ['name', 'directives', 'values'],\n InputObjectTypeExtension: ['name', 'directives', 'fields'],\n\n DirectiveDefinition: ['description', 'name', 'arguments', 'locations']\n};\n\n/**\n * A KeyMap describes each the traversable properties of each kind of node.\n */\nvar BREAK = exports.BREAK = {};\n\n/**\n * visit() will walk through an AST using a depth first traversal, calling\n * the visitor's enter function at each node in the traversal, and calling the\n * leave function after visiting that node and all of its child nodes.\n *\n * By returning different values from the enter and leave functions, the\n * behavior of the visitor can be altered, including skipping over a sub-tree of\n * the AST (by returning false), editing the AST by returning a value or null\n * to remove the value, or to stop the whole traversal by returning BREAK.\n *\n * When using visit() to edit an AST, the original AST will not be modified, and\n * a new version of the AST with the changes applied will be returned from the\n * visit function.\n *\n * const editedAST = visit(ast, {\n * enter(node, key, parent, path, ancestors) {\n * // @return\n * // undefined: no action\n * // false: skip visiting this node\n * // visitor.BREAK: stop visiting altogether\n * // null: delete this node\n * // any value: replace this node with the returned value\n * },\n * leave(node, key, parent, path, ancestors) {\n * // @return\n * // undefined: no action\n * // false: no action\n * // visitor.BREAK: stop visiting altogether\n * // null: delete this node\n * // any value: replace this node with the returned value\n * }\n * });\n *\n * Alternatively to providing enter() and leave() functions, a visitor can\n * instead provide functions named the same as the kinds of AST nodes, or\n * enter/leave visitors at a named key, leading to four permutations of\n * visitor API:\n *\n * 1) Named visitors triggered when entering a node a specific kind.\n *\n * visit(ast, {\n * Kind(node) {\n * // enter the \"Kind\" node\n * }\n * })\n *\n * 2) Named visitors that trigger upon entering and leaving a node of\n * a specific kind.\n *\n * visit(ast, {\n * Kind: {\n * enter(node) {\n * // enter the \"Kind\" node\n * }\n * leave(node) {\n * // leave the \"Kind\" node\n * }\n * }\n * })\n *\n * 3) Generic visitors that trigger upon entering and leaving any node.\n *\n * visit(ast, {\n * enter(node) {\n * // enter any node\n * },\n * leave(node) {\n * // leave any node\n * }\n * })\n *\n * 4) Parallel visitors for entering and leaving nodes of a specific kind.\n *\n * visit(ast, {\n * enter: {\n * Kind(node) {\n * // enter the \"Kind\" node\n * }\n * },\n * leave: {\n * Kind(node) {\n * // leave the \"Kind\" node\n * }\n * }\n * })\n */\nfunction visit(root, visitor) {\n var visitorKeys = arguments.length > 2 && arguments[2] !== undefined ? arguments[2] : QueryDocumentKeys;\n\n /* eslint-disable no-undef-init */\n var stack = undefined;\n var inArray = Array.isArray(root);\n var keys = [root];\n var index = -1;\n var edits = [];\n var node = undefined;\n var key = undefined;\n var parent = undefined;\n var path = [];\n var ancestors = [];\n var newRoot = root;\n /* eslint-enable no-undef-init */\n\n do {\n index++;\n var isLeaving = index === keys.length;\n var isEdited = isLeaving && edits.length !== 0;\n if (isLeaving) {\n key = ancestors.length === 0 ? undefined : path[path.length - 1];\n node = parent;\n parent = ancestors.pop();\n if (isEdited) {\n if (inArray) {\n node = node.slice();\n } else {\n var clone = {};\n for (var k in node) {\n if (node.hasOwnProperty(k)) {\n clone[k] = node[k];\n }\n }\n node = clone;\n }\n var editOffset = 0;\n for (var ii = 0; ii < edits.length; ii++) {\n var editKey = edits[ii][0];\n var editValue = edits[ii][1];\n if (inArray) {\n editKey -= editOffset;\n }\n if (inArray && editValue === null) {\n node.splice(editKey, 1);\n editOffset++;\n } else {\n node[editKey] = editValue;\n }\n }\n }\n index = stack.index;\n keys = stack.keys;\n edits = stack.edits;\n inArray = stack.inArray;\n stack = stack.prev;\n } else {\n key = parent ? inArray ? index : keys[index] : undefined;\n node = parent ? parent[key] : newRoot;\n if (node === null || node === undefined) {\n continue;\n }\n if (parent) {\n path.push(key);\n }\n }\n\n var result = void 0;\n if (!Array.isArray(node)) {\n if (!isNode(node)) {\n throw new Error('Invalid AST Node: ' + JSON.stringify(node));\n }\n var visitFn = getVisitFn(visitor, node.kind, isLeaving);\n if (visitFn) {\n result = visitFn.call(visitor, node, key, parent, path, ancestors);\n\n if (result === BREAK) {\n break;\n }\n\n if (result === false) {\n if (!isLeaving) {\n path.pop();\n continue;\n }\n } else if (result !== undefined) {\n edits.push([key, result]);\n if (!isLeaving) {\n if (isNode(result)) {\n node = result;\n } else {\n path.pop();\n continue;\n }\n }\n }\n }\n }\n\n if (result === undefined && isEdited) {\n edits.push([key, node]);\n }\n\n if (isLeaving) {\n path.pop();\n } else {\n stack = { inArray: inArray, index: index, keys: keys, edits: edits, prev: stack };\n inArray = Array.isArray(node);\n keys = inArray ? node : visitorKeys[node.kind] || [];\n index = -1;\n edits = [];\n if (parent) {\n ancestors.push(parent);\n }\n parent = node;\n }\n } while (stack !== undefined);\n\n if (edits.length !== 0) {\n newRoot = edits[edits.length - 1][1];\n }\n\n return newRoot;\n}\n\nfunction isNode(maybeNode) {\n return Boolean(maybeNode && typeof maybeNode.kind === 'string');\n}\n\n/**\n * Creates a new visitor instance which delegates to many visitors to run in\n * parallel. Each visitor will be visited for each node before moving on.\n *\n * If a prior visitor edits a node, no following visitors will see that node.\n */\nfunction visitInParallel(visitors) {\n var skipping = new Array(visitors.length);\n\n return {\n enter: function enter(node) {\n for (var i = 0; i < visitors.length; i++) {\n if (!skipping[i]) {\n var fn = getVisitFn(visitors[i], node.kind, /* isLeaving */false);\n if (fn) {\n var result = fn.apply(visitors[i], arguments);\n if (result === false) {\n skipping[i] = node;\n } else if (result === BREAK) {\n skipping[i] = BREAK;\n } else if (result !== undefined) {\n return result;\n }\n }\n }\n }\n },\n leave: function leave(node) {\n for (var i = 0; i < visitors.length; i++) {\n if (!skipping[i]) {\n var fn = getVisitFn(visitors[i], node.kind, /* isLeaving */true);\n if (fn) {\n var result = fn.apply(visitors[i], arguments);\n if (result === BREAK) {\n skipping[i] = BREAK;\n } else if (result !== undefined && result !== false) {\n return result;\n }\n }\n } else if (skipping[i] === node) {\n skipping[i] = null;\n }\n }\n }\n };\n}\n\n/**\n * Creates a new visitor instance which maintains a provided TypeInfo instance\n * along with visiting visitor.\n */\nfunction visitWithTypeInfo(typeInfo, visitor) {\n return {\n enter: function enter(node) {\n typeInfo.enter(node);\n var fn = getVisitFn(visitor, node.kind, /* isLeaving */false);\n if (fn) {\n var result = fn.apply(visitor, arguments);\n if (result !== undefined) {\n typeInfo.leave(node);\n if (isNode(result)) {\n typeInfo.enter(result);\n }\n }\n return result;\n }\n },\n leave: function leave(node) {\n var fn = getVisitFn(visitor, node.kind, /* isLeaving */true);\n var result = void 0;\n if (fn) {\n result = fn.apply(visitor, arguments);\n }\n typeInfo.leave(node);\n return result;\n }\n };\n}\n\n/**\n * Given a visitor instance, if it is leaving or not, and a node kind, return\n * the function the visitor runtime should call.\n */\nfunction getVisitFn(visitor, kind, isLeaving) {\n var kindVisitor = visitor[kind];\n if (kindVisitor) {\n if (!isLeaving && typeof kindVisitor === 'function') {\n // { Kind() {} }\n return kindVisitor;\n }\n var kindSpecificVisitor = isLeaving ? kindVisitor.leave : kindVisitor.enter;\n if (typeof kindSpecificVisitor === 'function') {\n // { Kind: { enter() {}, leave() {} } }\n return kindSpecificVisitor;\n }\n } else {\n var specificVisitor = isLeaving ? visitor.leave : visitor.enter;\n if (specificVisitor) {\n if (typeof specificVisitor === 'function') {\n // { enter() {}, leave() {} }\n return specificVisitor;\n }\n var specificKindVisitor = specificVisitor[kind];\n if (typeof specificKindVisitor === 'function') {\n // { enter: { Kind() {} }, leave: { Kind() {} } }\n return specificKindVisitor;\n }\n }\n }\n}","// shim for using process in browser\nvar process = module.exports = {};\n\n// cached from whatever global is present so that test runners that stub it\n// don't break things. But we need to wrap it in a try catch in case it is\n// wrapped in strict mode code which doesn't define any globals. It's inside a\n// function because try/catches deoptimize in certain engines.\n\nvar cachedSetTimeout;\nvar cachedClearTimeout;\n\nfunction defaultSetTimout() {\n throw new Error('setTimeout has not been defined');\n}\nfunction defaultClearTimeout () {\n throw new Error('clearTimeout has not been defined');\n}\n(function () {\n try {\n if (typeof setTimeout === 'function') {\n cachedSetTimeout = setTimeout;\n } else {\n cachedSetTimeout = defaultSetTimout;\n }\n } catch (e) {\n cachedSetTimeout = defaultSetTimout;\n }\n try {\n if (typeof clearTimeout === 'function') {\n cachedClearTimeout = clearTimeout;\n } else {\n cachedClearTimeout = defaultClearTimeout;\n }\n } catch (e) {\n cachedClearTimeout = defaultClearTimeout;\n }\n} ())\nfunction runTimeout(fun) {\n if (cachedSetTimeout === setTimeout) {\n //normal enviroments in sane situations\n return setTimeout(fun, 0);\n }\n // if setTimeout wasn't available but was latter defined\n if ((cachedSetTimeout === defaultSetTimout || !cachedSetTimeout) && setTimeout) {\n cachedSetTimeout = setTimeout;\n return setTimeout(fun, 0);\n }\n try {\n // when when somebody has screwed with setTimeout but no I.E. maddness\n return cachedSetTimeout(fun, 0);\n } catch(e){\n try {\n // When we are in I.E. but the script has been evaled so I.E. doesn't trust the global object when called normally\n return cachedSetTimeout.call(null, fun, 0);\n } catch(e){\n // same as above but when it's a version of I.E. that must have the global object for 'this', hopfully our context correct otherwise it will throw a global error\n return cachedSetTimeout.call(this, fun, 0);\n }\n }\n\n\n}\nfunction runClearTimeout(marker) {\n if (cachedClearTimeout === clearTimeout) {\n //normal enviroments in sane situations\n return clearTimeout(marker);\n }\n // if clearTimeout wasn't available but was latter defined\n if ((cachedClearTimeout === defaultClearTimeout || !cachedClearTimeout) && clearTimeout) {\n cachedClearTimeout = clearTimeout;\n return clearTimeout(marker);\n }\n try {\n // when when somebody has screwed with setTimeout but no I.E. maddness\n return cachedClearTimeout(marker);\n } catch (e){\n try {\n // When we are in I.E. but the script has been evaled so I.E. doesn't trust the global object when called normally\n return cachedClearTimeout.call(null, marker);\n } catch (e){\n // same as above but when it's a version of I.E. that must have the global object for 'this', hopfully our context correct otherwise it will throw a global error.\n // Some versions of I.E. have different rules for clearTimeout vs setTimeout\n return cachedClearTimeout.call(this, marker);\n }\n }\n\n\n\n}\nvar queue = [];\nvar draining = false;\nvar currentQueue;\nvar queueIndex = -1;\n\nfunction cleanUpNextTick() {\n if (!draining || !currentQueue) {\n return;\n }\n draining = false;\n if (currentQueue.length) {\n queue = currentQueue.concat(queue);\n } else {\n queueIndex = -1;\n }\n if (queue.length) {\n drainQueue();\n }\n}\n\nfunction drainQueue() {\n if (draining) {\n return;\n }\n var timeout = runTimeout(cleanUpNextTick);\n draining = true;\n\n var len = queue.length;\n while(len) {\n currentQueue = queue;\n queue = [];\n while (++queueIndex < len) {\n if (currentQueue) {\n currentQueue[queueIndex].run();\n }\n }\n queueIndex = -1;\n len = queue.length;\n }\n currentQueue = null;\n draining = false;\n runClearTimeout(timeout);\n}\n\nprocess.nextTick = function (fun) {\n var args = new Array(arguments.length - 1);\n if (arguments.length > 1) {\n for (var i = 1; i < arguments.length; i++) {\n args[i - 1] = arguments[i];\n }\n }\n queue.push(new Item(fun, args));\n if (queue.length === 1 && !draining) {\n runTimeout(drainQueue);\n }\n};\n\n// v8 likes predictible objects\nfunction Item(fun, array) {\n this.fun = fun;\n this.array = array;\n}\nItem.prototype.run = function () {\n this.fun.apply(null, this.array);\n};\nprocess.title = 'browser';\nprocess.browser = true;\nprocess.env = {};\nprocess.argv = [];\nprocess.version = ''; // empty string to avoid regexp issues\nprocess.versions = {};\n\nfunction noop() {}\n\nprocess.on = noop;\nprocess.addListener = noop;\nprocess.once = noop;\nprocess.off = noop;\nprocess.removeListener = noop;\nprocess.removeAllListeners = noop;\nprocess.emit = noop;\nprocess.prependListener = noop;\nprocess.prependOnceListener = noop;\n\nprocess.listeners = function (name) { return [] }\n\nprocess.binding = function (name) {\n throw new Error('process.binding is not supported');\n};\n\nprocess.cwd = function () { return '/' };\nprocess.chdir = function (dir) {\n throw new Error('process.chdir is not supported');\n};\nprocess.umask = function() { return 0; };\n","import { InMemoryCache } from \"apollo-cache-inmemory\";\nimport { ApolloClient } from \"apollo-client\";\nimport { HttpLink } from \"apollo-link-http\";\n\nimport \"unfetch/polyfill\";\n\nconst client = new ApolloClient({\n link: new HttpLink({ uri: \"/api\", credentials: \"same-origin\", fetch }),\n cache: new InMemoryCache()\n});\n\nexport default client;\n","import * as React from \"react\";\nimport { ApolloProvider } from \"react-apollo\";\n\nimport apolloClient from \"./apollo_client\";\n\nconst { I18n } = require(\"react-i18nify\");\n\ninterface ApplicationProps {\n locale: string;\n}\n\n/**\n * Wrapper component for all React applications using Apollo\n * @class\n * @augments Component\n */\nexport default class Application extends React.Component {\n constructor(props: ApplicationProps) {\n const { locale } = props;\n\n I18n.setLocale(locale);\n\n super(props);\n }\n\n public render() {\n const { children } = this.props;\n\n return (\n \n {children}\n \n );\n }\n}\n","/**\n * lodash (Custom Build) \n * Build: `lodash modularize exports=\"npm\" -o ./`\n * Copyright jQuery Foundation and other contributors \n * Released under MIT license \n * Based on Underscore.js 1.8.3 \n * Copyright Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors\n */\n\n/** Used as references for various `Number` constants. */\nvar INFINITY = 1 / 0,\n MAX_SAFE_INTEGER = 9007199254740991;\n\n/** `Object#toString` result references. */\nvar argsTag = '[object Arguments]',\n funcTag = '[object Function]',\n genTag = '[object GeneratorFunction]',\n symbolTag = '[object Symbol]';\n\n/** Detect free variable `global` from Node.js. */\nvar freeGlobal = typeof global == 'object' && global && global.Object === Object && global;\n\n/** Detect free variable `self`. */\nvar freeSelf = typeof self == 'object' && self && self.Object === Object && self;\n\n/** Used as a reference to the global object. */\nvar root = freeGlobal || freeSelf || Function('return this')();\n\n/**\n * A faster alternative to `Function#apply`, this function invokes `func`\n * with the `this` binding of `thisArg` and the arguments of `args`.\n *\n * @private\n * @param {Function} func The function to invoke.\n * @param {*} thisArg The `this` binding of `func`.\n * @param {Array} args The arguments to invoke `func` with.\n * @returns {*} Returns the result of `func`.\n */\nfunction apply(func, thisArg, args) {\n switch (args.length) {\n case 0: return func.call(thisArg);\n case 1: return func.call(thisArg, args[0]);\n case 2: return func.call(thisArg, args[0], args[1]);\n case 3: return func.call(thisArg, args[0], args[1], args[2]);\n }\n return func.apply(thisArg, args);\n}\n\n/**\n * A specialized version of `_.map` for arrays without support for iteratee\n * shorthands.\n *\n * @private\n * @param {Array} [array] The array to iterate over.\n * @param {Function} iteratee The function invoked per iteration.\n * @returns {Array} Returns the new mapped array.\n */\nfunction arrayMap(array, iteratee) {\n var index = -1,\n length = array ? array.length : 0,\n result = Array(length);\n\n while (++index < length) {\n result[index] = iteratee(array[index], index, array);\n }\n return result;\n}\n\n/**\n * Appends the elements of `values` to `array`.\n *\n * @private\n * @param {Array} array The array to modify.\n * @param {Array} values The values to append.\n * @returns {Array} Returns `array`.\n */\nfunction arrayPush(array, values) {\n var index = -1,\n length = values.length,\n offset = array.length;\n\n while (++index < length) {\n array[offset + index] = values[index];\n }\n return array;\n}\n\n/** Used for built-in method references. */\nvar objectProto = Object.prototype;\n\n/** Used to check objects for own properties. */\nvar hasOwnProperty = objectProto.hasOwnProperty;\n\n/**\n * Used to resolve the\n * [`toStringTag`](http://ecma-international.org/ecma-262/7.0/#sec-object.prototype.tostring)\n * of values.\n */\nvar objectToString = objectProto.toString;\n\n/** Built-in value references. */\nvar Symbol = root.Symbol,\n propertyIsEnumerable = objectProto.propertyIsEnumerable,\n spreadableSymbol = Symbol ? Symbol.isConcatSpreadable : undefined;\n\n/* Built-in method references for those with the same name as other `lodash` methods. */\nvar nativeMax = Math.max;\n\n/**\n * The base implementation of `_.flatten` with support for restricting flattening.\n *\n * @private\n * @param {Array} array The array to flatten.\n * @param {number} depth The maximum recursion depth.\n * @param {boolean} [predicate=isFlattenable] The function invoked per iteration.\n * @param {boolean} [isStrict] Restrict to values that pass `predicate` checks.\n * @param {Array} [result=[]] The initial result value.\n * @returns {Array} Returns the new flattened array.\n */\nfunction baseFlatten(array, depth, predicate, isStrict, result) {\n var index = -1,\n length = array.length;\n\n predicate || (predicate = isFlattenable);\n result || (result = []);\n\n while (++index < length) {\n var value = array[index];\n if (depth > 0 && predicate(value)) {\n if (depth > 1) {\n // Recursively flatten arrays (susceptible to call stack limits).\n baseFlatten(value, depth - 1, predicate, isStrict, result);\n } else {\n arrayPush(result, value);\n }\n } else if (!isStrict) {\n result[result.length] = value;\n }\n }\n return result;\n}\n\n/**\n * The base implementation of `_.pick` without support for individual\n * property identifiers.\n *\n * @private\n * @param {Object} object The source object.\n * @param {string[]} props The property identifiers to pick.\n * @returns {Object} Returns the new object.\n */\nfunction basePick(object, props) {\n object = Object(object);\n return basePickBy(object, props, function(value, key) {\n return key in object;\n });\n}\n\n/**\n * The base implementation of `_.pickBy` without support for iteratee shorthands.\n *\n * @private\n * @param {Object} object The source object.\n * @param {string[]} props The property identifiers to pick from.\n * @param {Function} predicate The function invoked per property.\n * @returns {Object} Returns the new object.\n */\nfunction basePickBy(object, props, predicate) {\n var index = -1,\n length = props.length,\n result = {};\n\n while (++index < length) {\n var key = props[index],\n value = object[key];\n\n if (predicate(value, key)) {\n result[key] = value;\n }\n }\n return result;\n}\n\n/**\n * The base implementation of `_.rest` which doesn't validate or coerce arguments.\n *\n * @private\n * @param {Function} func The function to apply a rest parameter to.\n * @param {number} [start=func.length-1] The start position of the rest parameter.\n * @returns {Function} Returns the new function.\n */\nfunction baseRest(func, start) {\n start = nativeMax(start === undefined ? (func.length - 1) : start, 0);\n return function() {\n var args = arguments,\n index = -1,\n length = nativeMax(args.length - start, 0),\n array = Array(length);\n\n while (++index < length) {\n array[index] = args[start + index];\n }\n index = -1;\n var otherArgs = Array(start + 1);\n while (++index < start) {\n otherArgs[index] = args[index];\n }\n otherArgs[start] = array;\n return apply(func, this, otherArgs);\n };\n}\n\n/**\n * Checks if `value` is a flattenable `arguments` object or array.\n *\n * @private\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is flattenable, else `false`.\n */\nfunction isFlattenable(value) {\n return isArray(value) || isArguments(value) ||\n !!(spreadableSymbol && value && value[spreadableSymbol]);\n}\n\n/**\n * Converts `value` to a string key if it's not a string or symbol.\n *\n * @private\n * @param {*} value The value to inspect.\n * @returns {string|symbol} Returns the key.\n */\nfunction toKey(value) {\n if (typeof value == 'string' || isSymbol(value)) {\n return value;\n }\n var result = (value + '');\n return (result == '0' && (1 / value) == -INFINITY) ? '-0' : result;\n}\n\n/**\n * Checks if `value` is likely an `arguments` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an `arguments` object,\n * else `false`.\n * @example\n *\n * _.isArguments(function() { return arguments; }());\n * // => true\n *\n * _.isArguments([1, 2, 3]);\n * // => false\n */\nfunction isArguments(value) {\n // Safari 8.1 makes `arguments.callee` enumerable in strict mode.\n return isArrayLikeObject(value) && hasOwnProperty.call(value, 'callee') &&\n (!propertyIsEnumerable.call(value, 'callee') || objectToString.call(value) == argsTag);\n}\n\n/**\n * Checks if `value` is classified as an `Array` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an array, else `false`.\n * @example\n *\n * _.isArray([1, 2, 3]);\n * // => true\n *\n * _.isArray(document.body.children);\n * // => false\n *\n * _.isArray('abc');\n * // => false\n *\n * _.isArray(_.noop);\n * // => false\n */\nvar isArray = Array.isArray;\n\n/**\n * Checks if `value` is array-like. A value is considered array-like if it's\n * not a function and has a `value.length` that's an integer greater than or\n * equal to `0` and less than or equal to `Number.MAX_SAFE_INTEGER`.\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is array-like, else `false`.\n * @example\n *\n * _.isArrayLike([1, 2, 3]);\n * // => true\n *\n * _.isArrayLike(document.body.children);\n * // => true\n *\n * _.isArrayLike('abc');\n * // => true\n *\n * _.isArrayLike(_.noop);\n * // => false\n */\nfunction isArrayLike(value) {\n return value != null && isLength(value.length) && !isFunction(value);\n}\n\n/**\n * This method is like `_.isArrayLike` except that it also checks if `value`\n * is an object.\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an array-like object,\n * else `false`.\n * @example\n *\n * _.isArrayLikeObject([1, 2, 3]);\n * // => true\n *\n * _.isArrayLikeObject(document.body.children);\n * // => true\n *\n * _.isArrayLikeObject('abc');\n * // => false\n *\n * _.isArrayLikeObject(_.noop);\n * // => false\n */\nfunction isArrayLikeObject(value) {\n return isObjectLike(value) && isArrayLike(value);\n}\n\n/**\n * Checks if `value` is classified as a `Function` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is a function, else `false`.\n * @example\n *\n * _.isFunction(_);\n * // => true\n *\n * _.isFunction(/abc/);\n * // => false\n */\nfunction isFunction(value) {\n // The use of `Object#toString` avoids issues with the `typeof` operator\n // in Safari 8-9 which returns 'object' for typed array and other constructors.\n var tag = isObject(value) ? objectToString.call(value) : '';\n return tag == funcTag || tag == genTag;\n}\n\n/**\n * Checks if `value` is a valid array-like length.\n *\n * **Note:** This method is loosely based on\n * [`ToLength`](http://ecma-international.org/ecma-262/7.0/#sec-tolength).\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is a valid length, else `false`.\n * @example\n *\n * _.isLength(3);\n * // => true\n *\n * _.isLength(Number.MIN_VALUE);\n * // => false\n *\n * _.isLength(Infinity);\n * // => false\n *\n * _.isLength('3');\n * // => false\n */\nfunction isLength(value) {\n return typeof value == 'number' &&\n value > -1 && value % 1 == 0 && value <= MAX_SAFE_INTEGER;\n}\n\n/**\n * Checks if `value` is the\n * [language type](http://www.ecma-international.org/ecma-262/7.0/#sec-ecmascript-language-types)\n * of `Object`. (e.g. arrays, functions, objects, regexes, `new Number(0)`, and `new String('')`)\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an object, else `false`.\n * @example\n *\n * _.isObject({});\n * // => true\n *\n * _.isObject([1, 2, 3]);\n * // => true\n *\n * _.isObject(_.noop);\n * // => true\n *\n * _.isObject(null);\n * // => false\n */\nfunction isObject(value) {\n var type = typeof value;\n return !!value && (type == 'object' || type == 'function');\n}\n\n/**\n * Checks if `value` is object-like. A value is object-like if it's not `null`\n * and has a `typeof` result of \"object\".\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is object-like, else `false`.\n * @example\n *\n * _.isObjectLike({});\n * // => true\n *\n * _.isObjectLike([1, 2, 3]);\n * // => true\n *\n * _.isObjectLike(_.noop);\n * // => false\n *\n * _.isObjectLike(null);\n * // => false\n */\nfunction isObjectLike(value) {\n return !!value && typeof value == 'object';\n}\n\n/**\n * Checks if `value` is classified as a `Symbol` primitive or object.\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is a symbol, else `false`.\n * @example\n *\n * _.isSymbol(Symbol.iterator);\n * // => true\n *\n * _.isSymbol('abc');\n * // => false\n */\nfunction isSymbol(value) {\n return typeof value == 'symbol' ||\n (isObjectLike(value) && objectToString.call(value) == symbolTag);\n}\n\n/**\n * Creates an object composed of the picked `object` properties.\n *\n * @static\n * @since 0.1.0\n * @memberOf _\n * @category Object\n * @param {Object} object The source object.\n * @param {...(string|string[])} [props] The property identifiers to pick.\n * @returns {Object} Returns the new object.\n * @example\n *\n * var object = { 'a': 1, 'b': '2', 'c': 3 };\n *\n * _.pick(object, ['a', 'c']);\n * // => { 'a': 1, 'c': 3 }\n */\nvar pick = baseRest(function(object, props) {\n return object == null ? {} : basePick(object, arrayMap(baseFlatten(props, 1), toKey));\n});\n\nmodule.exports = pick;\n","/**\n * lodash (Custom Build) \n * Build: `lodash modularize exports=\"npm\" -o ./`\n * Copyright jQuery Foundation and other contributors \n * Released under MIT license \n * Based on Underscore.js 1.8.3 \n * Copyright Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors\n */\n\n/** Used as the `TypeError` message for \"Functions\" methods. */\nvar FUNC_ERROR_TEXT = 'Expected a function';\n\n/** Used as references for various `Number` constants. */\nvar MAX_SAFE_INTEGER = 9007199254740991;\n\n/** `Object#toString` result references. */\nvar argsTag = '[object Arguments]',\n funcTag = '[object Function]',\n genTag = '[object GeneratorFunction]';\n\n/** Detect free variable `global` from Node.js. */\nvar freeGlobal = typeof global == 'object' && global && global.Object === Object && global;\n\n/** Detect free variable `self`. */\nvar freeSelf = typeof self == 'object' && self && self.Object === Object && self;\n\n/** Used as a reference to the global object. */\nvar root = freeGlobal || freeSelf || Function('return this')();\n\n/**\n * A faster alternative to `Function#apply`, this function invokes `func`\n * with the `this` binding of `thisArg` and the arguments of `args`.\n *\n * @private\n * @param {Function} func The function to invoke.\n * @param {*} thisArg The `this` binding of `func`.\n * @param {Array} args The arguments to invoke `func` with.\n * @returns {*} Returns the result of `func`.\n */\nfunction apply(func, thisArg, args) {\n switch (args.length) {\n case 0: return func.call(thisArg);\n case 1: return func.call(thisArg, args[0]);\n case 2: return func.call(thisArg, args[0], args[1]);\n case 3: return func.call(thisArg, args[0], args[1], args[2]);\n }\n return func.apply(thisArg, args);\n}\n\n/**\n * Appends the elements of `values` to `array`.\n *\n * @private\n * @param {Array} array The array to modify.\n * @param {Array} values The values to append.\n * @returns {Array} Returns `array`.\n */\nfunction arrayPush(array, values) {\n var index = -1,\n length = values.length,\n offset = array.length;\n\n while (++index < length) {\n array[offset + index] = values[index];\n }\n return array;\n}\n\n/** Used for built-in method references. */\nvar objectProto = Object.prototype;\n\n/** Used to check objects for own properties. */\nvar hasOwnProperty = objectProto.hasOwnProperty;\n\n/**\n * Used to resolve the\n * [`toStringTag`](http://ecma-international.org/ecma-262/7.0/#sec-object.prototype.tostring)\n * of values.\n */\nvar objectToString = objectProto.toString;\n\n/** Built-in value references. */\nvar Symbol = root.Symbol,\n propertyIsEnumerable = objectProto.propertyIsEnumerable,\n spreadableSymbol = Symbol ? Symbol.isConcatSpreadable : undefined;\n\n/* Built-in method references for those with the same name as other `lodash` methods. */\nvar nativeMax = Math.max;\n\n/**\n * The base implementation of `_.flatten` with support for restricting flattening.\n *\n * @private\n * @param {Array} array The array to flatten.\n * @param {number} depth The maximum recursion depth.\n * @param {boolean} [predicate=isFlattenable] The function invoked per iteration.\n * @param {boolean} [isStrict] Restrict to values that pass `predicate` checks.\n * @param {Array} [result=[]] The initial result value.\n * @returns {Array} Returns the new flattened array.\n */\nfunction baseFlatten(array, depth, predicate, isStrict, result) {\n var index = -1,\n length = array.length;\n\n predicate || (predicate = isFlattenable);\n result || (result = []);\n\n while (++index < length) {\n var value = array[index];\n if (depth > 0 && predicate(value)) {\n if (depth > 1) {\n // Recursively flatten arrays (susceptible to call stack limits).\n baseFlatten(value, depth - 1, predicate, isStrict, result);\n } else {\n arrayPush(result, value);\n }\n } else if (!isStrict) {\n result[result.length] = value;\n }\n }\n return result;\n}\n\n/**\n * The base implementation of `_.rest` which doesn't validate or coerce arguments.\n *\n * @private\n * @param {Function} func The function to apply a rest parameter to.\n * @param {number} [start=func.length-1] The start position of the rest parameter.\n * @returns {Function} Returns the new function.\n */\nfunction baseRest(func, start) {\n start = nativeMax(start === undefined ? (func.length - 1) : start, 0);\n return function() {\n var args = arguments,\n index = -1,\n length = nativeMax(args.length - start, 0),\n array = Array(length);\n\n while (++index < length) {\n array[index] = args[start + index];\n }\n index = -1;\n var otherArgs = Array(start + 1);\n while (++index < start) {\n otherArgs[index] = args[index];\n }\n otherArgs[start] = array;\n return apply(func, this, otherArgs);\n };\n}\n\n/**\n * Creates a `_.flow` or `_.flowRight` function.\n *\n * @private\n * @param {boolean} [fromRight] Specify iterating from right to left.\n * @returns {Function} Returns the new flow function.\n */\nfunction createFlow(fromRight) {\n return baseRest(function(funcs) {\n funcs = baseFlatten(funcs, 1);\n\n var length = funcs.length,\n index = length;\n\n if (fromRight) {\n funcs.reverse();\n }\n while (index--) {\n if (typeof funcs[index] != 'function') {\n throw new TypeError(FUNC_ERROR_TEXT);\n }\n }\n return function() {\n var index = 0,\n result = length ? funcs[index].apply(this, arguments) : arguments[0];\n\n while (++index < length) {\n result = funcs[index].call(this, result);\n }\n return result;\n };\n });\n}\n\n/**\n * Checks if `value` is a flattenable `arguments` object or array.\n *\n * @private\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is flattenable, else `false`.\n */\nfunction isFlattenable(value) {\n return isArray(value) || isArguments(value) ||\n !!(spreadableSymbol && value && value[spreadableSymbol]);\n}\n\n/**\n * Checks if `value` is likely an `arguments` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an `arguments` object,\n * else `false`.\n * @example\n *\n * _.isArguments(function() { return arguments; }());\n * // => true\n *\n * _.isArguments([1, 2, 3]);\n * // => false\n */\nfunction isArguments(value) {\n // Safari 8.1 makes `arguments.callee` enumerable in strict mode.\n return isArrayLikeObject(value) && hasOwnProperty.call(value, 'callee') &&\n (!propertyIsEnumerable.call(value, 'callee') || objectToString.call(value) == argsTag);\n}\n\n/**\n * Checks if `value` is classified as an `Array` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an array, else `false`.\n * @example\n *\n * _.isArray([1, 2, 3]);\n * // => true\n *\n * _.isArray(document.body.children);\n * // => false\n *\n * _.isArray('abc');\n * // => false\n *\n * _.isArray(_.noop);\n * // => false\n */\nvar isArray = Array.isArray;\n\n/**\n * Checks if `value` is array-like. A value is considered array-like if it's\n * not a function and has a `value.length` that's an integer greater than or\n * equal to `0` and less than or equal to `Number.MAX_SAFE_INTEGER`.\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is array-like, else `false`.\n * @example\n *\n * _.isArrayLike([1, 2, 3]);\n * // => true\n *\n * _.isArrayLike(document.body.children);\n * // => true\n *\n * _.isArrayLike('abc');\n * // => true\n *\n * _.isArrayLike(_.noop);\n * // => false\n */\nfunction isArrayLike(value) {\n return value != null && isLength(value.length) && !isFunction(value);\n}\n\n/**\n * This method is like `_.isArrayLike` except that it also checks if `value`\n * is an object.\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an array-like object,\n * else `false`.\n * @example\n *\n * _.isArrayLikeObject([1, 2, 3]);\n * // => true\n *\n * _.isArrayLikeObject(document.body.children);\n * // => true\n *\n * _.isArrayLikeObject('abc');\n * // => false\n *\n * _.isArrayLikeObject(_.noop);\n * // => false\n */\nfunction isArrayLikeObject(value) {\n return isObjectLike(value) && isArrayLike(value);\n}\n\n/**\n * Checks if `value` is classified as a `Function` object.\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is a function, else `false`.\n * @example\n *\n * _.isFunction(_);\n * // => true\n *\n * _.isFunction(/abc/);\n * // => false\n */\nfunction isFunction(value) {\n // The use of `Object#toString` avoids issues with the `typeof` operator\n // in Safari 8-9 which returns 'object' for typed array and other constructors.\n var tag = isObject(value) ? objectToString.call(value) : '';\n return tag == funcTag || tag == genTag;\n}\n\n/**\n * Checks if `value` is a valid array-like length.\n *\n * **Note:** This method is loosely based on\n * [`ToLength`](http://ecma-international.org/ecma-262/7.0/#sec-tolength).\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is a valid length, else `false`.\n * @example\n *\n * _.isLength(3);\n * // => true\n *\n * _.isLength(Number.MIN_VALUE);\n * // => false\n *\n * _.isLength(Infinity);\n * // => false\n *\n * _.isLength('3');\n * // => false\n */\nfunction isLength(value) {\n return typeof value == 'number' &&\n value > -1 && value % 1 == 0 && value <= MAX_SAFE_INTEGER;\n}\n\n/**\n * Checks if `value` is the\n * [language type](http://www.ecma-international.org/ecma-262/7.0/#sec-ecmascript-language-types)\n * of `Object`. (e.g. arrays, functions, objects, regexes, `new Number(0)`, and `new String('')`)\n *\n * @static\n * @memberOf _\n * @since 0.1.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is an object, else `false`.\n * @example\n *\n * _.isObject({});\n * // => true\n *\n * _.isObject([1, 2, 3]);\n * // => true\n *\n * _.isObject(_.noop);\n * // => true\n *\n * _.isObject(null);\n * // => false\n */\nfunction isObject(value) {\n var type = typeof value;\n return !!value && (type == 'object' || type == 'function');\n}\n\n/**\n * Checks if `value` is object-like. A value is object-like if it's not `null`\n * and has a `typeof` result of \"object\".\n *\n * @static\n * @memberOf _\n * @since 4.0.0\n * @category Lang\n * @param {*} value The value to check.\n * @returns {boolean} Returns `true` if `value` is object-like, else `false`.\n * @example\n *\n * _.isObjectLike({});\n * // => true\n *\n * _.isObjectLike([1, 2, 3]);\n * // => true\n *\n * _.isObjectLike(_.noop);\n * // => false\n *\n * _.isObjectLike(null);\n * // => false\n */\nfunction isObjectLike(value) {\n return !!value && typeof value == 'object';\n}\n\n/**\n * This method is like `_.flow` except that it creates a function that\n * invokes the given functions from right to left.\n *\n * @static\n * @since 3.0.0\n * @memberOf _\n * @category Util\n * @param {...(Function|Function[])} [funcs] The functions to invoke.\n * @returns {Function} Returns the new composite function.\n * @see _.flow\n * @example\n *\n * function square(n) {\n * return n * n;\n * }\n *\n * var addSquare = _.flowRight([square, _.add]);\n * addSquare(1, 2);\n * // => 9\n */\nvar flowRight = createFlow(true);\n\nmodule.exports = flowRight;\n","/**\n * Copyright (c) 2013-present, Facebook, Inc.\n *\n * This source code is licensed under the MIT license found in the\n * LICENSE file in the root directory of this source tree.\n */\n\n'use strict';\n\nvar ReactPropTypesSecret = 'SECRET_DO_NOT_PASS_THIS_OR_YOU_WILL_BE_FIRED';\n\nmodule.exports = ReactPropTypesSecret;\n","/**\n * Copyright (c) 2013-present, Facebook, Inc.\n *\n * This source code is licensed under the MIT license found in the\n * LICENSE file in the root directory of this source tree.\n *\n */\n\n'use strict';\n\n/**\n * Use invariant() to assert state which your program assumes to be true.\n *\n * Provide sprintf-style format (only %s is supported) and arguments\n * to provide information about what broke and what you were\n * expecting.\n *\n * The invariant message will be stripped in production, but the invariant\n * will remain to ensure logic does not differ in production.\n */\n\nvar validateFormat = function validateFormat(format) {};\n\nif (process.env.NODE_ENV !== 'production') {\n validateFormat = function validateFormat(format) {\n if (format === undefined) {\n throw new Error('invariant requires an error message argument');\n }\n };\n}\n\nfunction invariant(condition, format, a, b, c, d, e, f) {\n validateFormat(format);\n\n if (!condition) {\n var error;\n if (format === undefined) {\n error = new Error('Minified exception occurred; use the non-minified dev environment ' + 'for the full error message and additional helpful warnings.');\n } else {\n var args = [a, b, c, d, e, f];\n var argIndex = 0;\n error = new Error(format.replace(/%s/g, function () {\n return args[argIndex++];\n }));\n error.name = 'Invariant Violation';\n }\n\n error.framesToPop = 1; // we don't care about invariant's own frame\n throw error;\n }\n}\n\nmodule.exports = invariant;","/**\n * Copyright (c) 2013-present, Facebook, Inc.\n *\n * This source code is licensed under the MIT license found in the\n * LICENSE file in the root directory of this source tree.\n */\n\n'use strict';\n\nvar emptyFunction = require('fbjs/lib/emptyFunction');\nvar invariant = require('fbjs/lib/invariant');\nvar ReactPropTypesSecret = require('./lib/ReactPropTypesSecret');\n\nmodule.exports = function() {\n function shim(props, propName, componentName, location, propFullName, secret) {\n if (secret === ReactPropTypesSecret) {\n // It is still safe when called from React.\n return;\n }\n invariant(\n false,\n 'Calling PropTypes validators directly is not supported by the `prop-types` package. ' +\n 'Use PropTypes.checkPropTypes() to call them. ' +\n 'Read more at http://fb.me/use-check-prop-types'\n );\n };\n shim.isRequired = shim;\n function getShim() {\n return shim;\n };\n // Important!\n // Keep this list in sync with production version in `./factoryWithTypeCheckers.js`.\n var ReactPropTypes = {\n array: shim,\n bool: shim,\n func: shim,\n number: shim,\n object: shim,\n string: shim,\n symbol: shim,\n\n any: shim,\n arrayOf: getShim,\n element: shim,\n instanceOf: getShim,\n node: shim,\n objectOf: getShim,\n oneOf: getShim,\n oneOfType: getShim,\n shape: getShim,\n exact: getShim\n };\n\n ReactPropTypes.checkPropTypes = emptyFunction;\n ReactPropTypes.PropTypes = ReactPropTypes;\n\n return ReactPropTypes;\n};\n","import * as React from \"react\";\nimport { graphql } from \"react-apollo\";\n\nimport Application from \"../application/application.component\";\n\nimport AddCommentForm from \"./add_comment_form.component\";\nimport CommentOrderSelector from \"./comment_order_selector.component\";\nimport CommentThread from \"./comment_thread.component\";\n\nimport {\n GetCommentsQuery,\n GetCommentsQueryVariables\n} from \"../support/schema\";\n\nconst { I18n } = require(\"react-i18nify\");\n\ninterface CommentsProps extends GetCommentsQuery {\n loading?: boolean;\n orderBy: string;\n reorderComments: (orderBy: string) => void;\n}\n\n/**\n * The core class of the Decidim Comments engine.\n * It renders a collection of comments given a commentable id and type.\n * @global\n * @class\n * @augments Component\n */\nexport class Comments extends React.Component {\n public static defaultProps: any = {\n loading: false,\n session: null,\n commentable: {\n comments: []\n }\n };\n\n public render() {\n const { commentable: { comments, totalCommentsCount }, reorderComments, orderBy, loading } = this.props;\n let commentClasses = \"comments\";\n let commentHeader = I18n.t(\"components.comments.title\", { count: totalCommentsCount });\n\n if (loading) {\n commentClasses += \" loading-comments\";\n commentHeader = I18n.t(\"components.comments.loading\");\n }\n\n return (\n \n );\n }\n\n /**\n * Renders a warning message if the commentable doesn't accept new comments.\n * @private\n * @returns {Void|DOMElement} - A warning message or nothing.\n */\n private _renderBlockedCommentsWarning() {\n const { commentable: { acceptsNewComments } } = this.props;\n\n if (!acceptsNewComments) {\n return (\n \n
{I18n.t(\"components.comments.blocked_comments_warning\")}
\n