Timetrap ======== Timetrap is a simple command line time tracker written in ruby. It provides an easy to use command line interface for tracking what you spend your time on. Getting Started --------------- To install: $ gem install timetrap This will place a ``t`` executable in your path. ### Basic Usage $ # get help $ t --help Timetrap maintains a list of *timesheets*. $ # create the "coding" timesheet $ t sheet coding Switching to sheet coding All commands can be abbreviated. $ # same as "t sheet coding" $ t s coding Switching to sheet coding Each timesheet contains *entries*. Each entry has a start and end time, and a note associated with it. An entry without an end time set is considered to be running. You check in to the current sheet with the `in` command. $ # check in with "document timetrap" note $ t in document timetrap Checked into sheet "coding". Commands like `display` and `now` will show you the running entry. $ t display Timesheet: coding Day Start End Duration Notes Sun Nov 28, 2010 12:26:10 - 0:00:03 document timetrap 0:00:03 --------------------------------------------------------- Total 0:00:03 $ t now *coding: 0:01:02 (document timetrap) If you make a mistake use the `edit` command. $ # edit the running entry's note $ t edit writing readme editing entry #42 You check out with the `out` command. $ t out Checked out of sheet "coding" You can edit entries that aren't running using `edit`'s `--id` or `-i` flag. `t display --ids` (or `t display -v`) will tell you the ids. $ # note id column in output $ t d -v Timesheet: coding Id Day Start End Duration Notes 43 Sun Nov 28, 2010 12:26:10 - 13:41:03 1:14:53 writing readme 1:14:53 --------------------------------------------------------- Total 1:14:53 $ # -i43 to edit entry 43 $ t e -i43 --end "2010-11-28 13:45" editing entry #43 $ t d Timesheet: coding Day Start End Duration Notes Sun Nov 28, 2010 12:26:10 - 13:45:00 1:18:50 writing readme 1:18:50 --------------------------------------------------------- Total 1:18:50 ### Natural Language Times Commands such as `in`, `out`, `edit`, and `display` have flags that accept times as arguments. Any time you pass Timetrap a time it will try to parse it as a natural language time. This is very handy if you start working and forget to start Timetrap. You can check in 5 minutes ago using `in`'s `--at` flag. $ t in --at "5 minutes ago" Command line flags also have short versions. $ # equivilent to the command above $ t i -a "5 minutes ago" You can consult the Chronic gem (http://chronic.rubyforge.org/) for a full list of parsable time formats, but all of these should work. $ t out --at "in 30 minutes" $ t edit --start "last monday at 10:30am" $ t edit --end "tomorrow at noon" $ t display --start "10am" --end "2pm" $ t i -a "2010-11-29 12:30:00" ### Output Formats #### Built-in Formatters Timetrap has built-in support for 6 output formats. These are **text**, **csv**, **ical**, **json**, and **ids** The default is a plain **text** format. (You can change the default format using `t configure`). $ t display Timesheet: coding Day Start End Duration Notes Mon Apr 13, 2009 15:46:51 - 17:03:50 1:16:59 improved display functionality 17:25:59 - 17:26:02 0:00:03 18:38:07 - 18:38:52 0:00:45 working on list 22:37:38 - 23:38:43 1:01:05 work on kill 2:18:52 Tue Apr 14, 2009 00:41:16 - 01:40:19 0:59:03 gem packaging 10:20:00 - 10:48:10 0:28:10 working on readme 1:27:13 --------------------------------------------------------- Total 3:46:05 The **CSV** formatters is easy to import into a spreadsheet. $ t display --format csv start,end,note,sheet "2010-08-21 11:19:05","2010-08-21 12:12:04","migrated site","coding" "2010-08-21 12:44:09","2010-08-21 12:48:46","DNS emails and install email packages","coding" "2010-08-21 12:49:57","2010-08-21 13:10:12","A records","coding" "2010-08-21 15:09:37","2010-08-21 16:32:26","setup for wiki","coding" "2010-08-25 20:42:55","2010-08-25 21:41:49","rewrote index","coding" "2010-08-29 15:44:39","2010-08-29 16:21:53","recaptcha","coding" "2010-08-29 21:15:58","2010-08-29 21:30:31","backups","coding" "2010-08-29 21:40:56","2010-08-29 22:32:26","backups","coding" **iCal** format lets you get your time into your favorite calendar program (remember commands can be abbreviated). $ t d -f ical > MyTimeSheet.ics The **ids** formatter is provided to facilitate scripting within timetrap. It only outputs numeric id for the entries. This is handy if you want to move all entries from one sheet to another sheet. You could do something like this: $ for id in `t display sheet1 -f ids`; do t edit --id $id --move sheet2; done editing entry #36 editing entry #37 editing entry #44 editing entry #46 A *json* formatter is provided because hackers love json. $ t d -fjson #### Custom Formatters Timetrap tries to make it easy to define custom output formats. You're encouraged to submit these back to timetrap for inclusion in a future version. To create a custom formatter you create a ruby class and implement two methods on it. As an example we'll create a formatter that only outputs the notes from entries. To ensure that timetrap can find your formatter put it in `~/.timetrap/formatters/notes.rb`. The filename should be the same as the string you will pass to `t d --format` to invoke it. If you want to put your formatter in a different place you can run `t configure` and edit the `formatter_search_paths` option. All timetrap formatters live under the namespace `Timetrap::Formatters` so define your class like this: class Timetrap::Formatters::Notes end When `t display` is invoked, timetrap initializes a new instance of the formatter passing it an Array of entries. It then calls `#output` which should return a string to be printed to the screen. This means we need to implement an `#initialize` method and an `#output` method for the class. Something like this: class Timetrap::Formatters::Notes def initialize(entries) @entries = entries end def output @entries.map{|entry| entry[:note]}.join("\n") end end Now when I invoke it: $ t d -f notes working on issue #123 working on issue #234 Timetrap Formatters Repository ------------------------------ A community focused repository of custom formatters is available at https://github.com/samg/timetrap_formatters. Commands -------- **archive** Archives the selected entries (by moving them to a sheet called ``_[SHEET]``) These entries can be seen by running ``t display _[SHEET]``. usage: ``t archive [--start DATE] [--end DATE] [SHEET]`` **backend** Run an interactive database session on the timetrap database. Requires the sqlite3 command. usage: ``t backend`` **configure** Creates a config file at ``~/.timetrap.yml`` or ``ENV['TIMETRAP_CONFIG_FILE']`` if one doesn't exist. If one does exist it will update it with new configuration options preserving any user overrides. Prints path to config file. This file may contain ERB. usage: ``t configure`` **display** Display a given timesheet. If no timesheet is specified, show the current timesheet. If ``all`` is passed as SHEET display all timesheets. If ``full`` is passed as SHEET archived timesheets are displayed as well. Accepts an optional ``--ids`` flag which will include the entries' ids in the output. This is useful when editing an non running entry with ``edit``. Display is designed to support a variety of export formats that can be specified by passing the ``--format`` flag. This currently defaults to text. iCal, csv, json, and numeric id output are also supported. Display also allows the use of a ``--round`` or ``-r`` flag which will round all times in the output. See global options below. usage: ``t display [--ids] [--round] [--start DATE] [--end DATE] [--format FMT] [SHEET | all | full]`` **edit** Inserts a note associated with the an entry in the timesheet, or edits the start or end times. Defaults to the current time although an ``--id`` flag can be passed with the entry's id (see display.) usage: ``t edit [--id ID] [--start TIME] [--end TIME] [--append] [NOTES]`` **in** Start the timer for the current timesheet. Must be called before out. Notes may be specified for this period. This is exactly equivalent to ``t in; t edit NOTES``. Accepts an optional --at flag. usage: ``t in [--at TIME] [NOTES]`` **kill** Delete a timesheet or an entry. Entry's are referenced using an ``--id`` flag (see display). Sheets are referenced by name. usage: ``t kill [--id ID] [TIMESHEET]`` **list** List the available timesheets. usage: ``t list`` **now** Print a description of all running entries. usage: ``t now`` **out** Stop the timer for the current timesheet. Must be called after in. Accepts an optional --at flag. Accepts an optional TIMESHEET name to check out of a running, non-current sheet. usage: ``t out [--at TIME] [TIMESHEET]`` **resume** Start the timer for the current timesheet with the same notes as the last entry. If there is no last entry the new one has blank notes ore uses the optional NOTES parameter. usage: ``t resume [--at TIME] [NOTES]`` **sheet** Switch to a timesheet creating it if necessary. The default timesheet is called "default". When no sheet is specified list all existing sheets. The special timesheet name '-' will switch to the last active sheet. usage: ``t sheet [TIMESHEET]`` **week** Shortcut for display with start date set to monday of this week usage: ``t week [--ids] [--end DATE] [--format FMT] [TIMESHEET | all]`` **month** Shortcut for display with start date set to the beginning of this month (or a specified month) and end date set to the end of the month. usage: ``t month [--ids] [--start MONTH] [--format FMT] [TIMESHEET | all]`` Global Options -------- **rounding** passing a ``--round`` or ``-r`` flag to any command will round entry start and end times to the closest 15 minute increment. This flag only affects the display commands (e.g. display, list, week, etc.) and is non-destructive. The actual start and end time stored by Timetrap are unaffected. See `configure` command to change rounding increment from 15 minutes. **non-interactive** passing a ``--yes`` or ``-y`` flag will cause any command that requires confirmation (such as ``kill``) to assume an affirmative response to any prompt. This is useful when timetrap is used in a scripted environment. Configuration -------- Configuration of TimeTrap's behavior can be done through an ERB interpolated YAML config file. See ``t configure`` for details. Currently supported options are: **round_in_seconds**: The duration of time to use for rounding with the -r flag **database_file**: The file path of the sqlite database **append_notes_delimiter**: delimiter used when appending notes via `t edit --append` **formatter_search_paths**: an array of directories to search for user defined fomatter classes **default_formatter**: The format to use when display is invoked without a `--format` option Special Thanks -------------- The initial version of Timetrap was heavily inspired by Trevor Caira's Timebook, a small python utility. Original Timebook available at: http://bitbucket.org/trevor/timebook/src/ Bugs and Feature Requests -------- Submit to http://github.com/samg/timetrap/issues