require 'puppet/property/boolean'

module Puppet
  # We want the mount to refresh when it changes.
  Type.newtype(:mount, :self_refresh => true) do
    @doc = "Manages mounted filesystems, including putting mount
      information into the mount table. The actual behavior depends
      on the value of the 'ensure' parameter.

      **Refresh:** `mount` resources can respond to refresh events (via
      `notify`, `subscribe`, or the `~>` arrow). If a `mount` receives an event
      from another resource **and** its `ensure` attribute is set to `mounted`,
      Puppet will try to unmount then remount that filesystem.

      **Autorequires:** If Puppet is managing any parents of a mount resource ---
      that is, other mount points higher up in the filesystem --- the child
      mount will autorequire them.

      **Autobefores:**  If Puppet is managing any child file paths of a mount
      point, the mount resource will autobefore them."

    feature :refreshable, "The provider can remount the filesystem.",
      :methods => [:remount]

    # Use the normal parent class, because we actually want to
    # call code when sync is called.
    newproperty(:ensure) do
      desc "Control what to do with this mount. Set this attribute to
        `unmounted` to make sure the filesystem is in the filesystem table
        but not mounted (if the filesystem is currently mounted, it will be
        unmounted).  Set it to `absent` to unmount (if necessary) and remove
        the filesystem from the fstab.  Set to `mounted` to add it to the
        fstab and mount it. Set to `present` to add to fstab but not change
        mount/unmount status."

      #  IS        -> SHOULD     In Sync  Action
      #  ghost     -> present    NO       create
      #  absent    -> present    NO       create
      # (mounted   -> present    YES)
      # (unmounted -> present    YES)
      newvalue(:defined) do
        provider.create
        return :mount_created
      end

      aliasvalue :present, :defined

      #  IS        -> SHOULD     In Sync  Action
      #  ghost     -> unmounted  NO       create, unmount
      #  absent    -> unmounted  NO       create
      #  mounted   -> unmounted  NO       unmount
      newvalue(:unmounted) do
        case self.retrieve
        when :ghost   # (not in fstab but mounted)
          provider.create
          @resource.flush
          provider.unmount
          return :mount_unmounted
        when nil, :absent  # (not in fstab and not mounted)
          provider.create
          return :mount_created
        when :mounted # (in fstab and mounted)
          provider.unmount
          syncothers # I guess it's more likely that the mount was originally mounted with
                     # the wrong attributes so I sync AFTER the umount
          return :mount_unmounted
        else
          raise Puppet::Error, _("Unexpected change from %{current} to unmounted") % { current: current_value }
        end
      end

      #  IS        -> SHOULD     In Sync  Action
      #  ghost     -> absent     NO       unmount
      #  mounted   -> absent     NO       provider.destroy AND unmount
      #  unmounted -> absent     NO       provider.destroy
      newvalue(:absent, :event => :mount_deleted) do
        current_value = self.retrieve
        provider.unmount if provider.mounted?
        provider.destroy unless current_value == :ghost
      end

      #  IS        -> SHOULD     In Sync  Action
      #  ghost     -> mounted    NO       provider.create
      #  absent    -> mounted    NO       provider.create AND mount
      #  unmounted -> mounted    NO       mount
      newvalue(:mounted, :event => :mount_mounted) do
        # Create the mount point if it does not already exist.
        current_value = self.retrieve
        currently_mounted = provider.mounted?
        provider.create if [nil, :absent, :ghost].include?(current_value)

        syncothers

        # The fs can be already mounted if it was absent but mounted
        provider.property_hash[:needs_mount] = true unless currently_mounted
      end

      # insync: mounted   -> present
      #         unmounted -> present
      def insync?(is)
        if should == :defined and [:mounted,:unmounted].include?(is)
          true
        else
          super
        end
      end

      def syncothers
        # We have to flush any changes to disk.
        currentvalues = @resource.retrieve_resource

        # Determine if there are any out-of-sync properties.
        oos = @resource.send(:properties).find_all do |prop|
          unless currentvalues.include?(prop)
            raise Puppet::DevError, _("Parent has property %{name} but it doesn't appear in the current values") % { name: prop.name }
          end
          if prop.name == :ensure
            false
          else
            ! prop.safe_insync?(currentvalues[prop])
          end
        end.each { |prop| prop.sync }.length
        @resource.flush if oos > 0
      end
    end

    newproperty(:device) do
      desc "The device providing the mount.  This can be whatever
        device is supporting by the mount, including network
        devices or devices specified by UUID rather than device
        path, depending on the operating system."

      validate do |value|
        raise Puppet::Error, _("device must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
      end
    end

    # Solaris specifies two devices, not just one.
    newproperty(:blockdevice) do
      desc "The device to fsck.  This is property is only valid
        on Solaris, and in most cases will default to the correct
        value."

      # Default to the device but with "dsk" replaced with "rdsk".
      defaultto do
        if Facter.value(:osfamily) == "Solaris"
          if device = resource[:device] and device =~ %r{/dsk/}
            device.sub(%r{/dsk/}, "/rdsk/")
          elsif fstype = resource[:fstype] and fstype == 'nfs'
            '-'
          else
            nil
          end
        else
          nil
        end
      end

      validate do |value|
        raise Puppet::Error, _("blockdevice must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
      end
    end

    newproperty(:fstype) do
      desc "The mount type.  Valid values depend on the
        operating system.  This is a required option."

      validate do |value|
        raise Puppet::Error, _("fstype must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
        raise Puppet::Error, _("fstype must not be an empty string") if value.empty?
      end
    end

    newproperty(:options) do
      desc "A single string containing options for the mount, as they would
        appear in fstab on Linux. For many platforms this is a comma-delimited
        string. Consult the fstab(5) man page for system-specific details.
        AIX options other than dev, nodename, or vfs can be defined here. If
        specified, AIX options of account, boot, check, free, mount, size,
        type, vol, log, and quota must be ordered alphabetically at the end of
        the list."

      validate do |value|
        raise Puppet::Error, _("options must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
        raise Puppet::Error, _("options must not be an empty string") if value.empty?
      end
    end

    newproperty(:pass) do
      desc "The pass in which the mount is checked."

      defaultto {
        if @resource.managed?
          if Facter.value(:osfamily) == 'Solaris'
            '-'
          else
            0
          end
        end
      }
    end

    newproperty(:atboot, :parent => Puppet::Property::Boolean) do
      desc "Whether to mount the mount at boot.  Not all platforms
        support this."

      def munge(value)
        munged = super
        if munged
          :yes
        else
          :no
        end
      end
    end

    newproperty(:dump) do
      desc "Whether to dump the mount.  Not all platform support this.
        Valid values are `1` or `0` (or `2` on FreeBSD). Default is `0`."

      if Facter.value(:operatingsystem) == "FreeBSD"
        newvalue(%r{(0|1|2)})
      else
        newvalue(%r{(0|1)})
      end

      defaultto {
        0 if @resource.managed?
      }
    end

    newproperty(:target) do
      desc "The file in which to store the mount table.  Only used by
        those providers that write to disk."

      defaultto { if @resource.class.defaultprovider.ancestors.include?(Puppet::Provider::ParsedFile)
          @resource.class.defaultprovider.default_target
        else
          nil
        end
      }
    end

    newparam(:name) do
      desc "The mount path for the mount."

      isnamevar

      validate do |value|
        raise Puppet::Error, _("name must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
      end

      munge do |value|
        value.gsub(/^(.+?)\/*$/, '\1')
      end
    end

    newparam(:remounts) do
      desc "Whether the mount can be remounted  `mount -o remount`.  If
        this is false, then the filesystem will be unmounted and remounted
        manually, which is prone to failure."

      newvalues(:true, :false)
      defaultto do
        case Facter.value(:operatingsystem)
        when "FreeBSD", "Darwin", "DragonFly", "OpenBSD"
          false
        when "AIX"
          if Facter.value(:kernelmajversion) == "5300"
            false
          elsif resource[:device] and resource[:device].match(%r{^[^/]+:/})
            false
          else
            true
          end
        else
          true
        end
      end
    end

    def refresh
      # Only remount if we're supposed to be mounted.
      provider.remount if self.should(:fstype) != "swap" and provider.mounted?
    end

    def value(name)
      name = name.intern
      if property = @parameters[name]
        return property.value
      end
    end

    # Ensure that mounts higher up in the filesystem are mounted first
    autorequire(:mount) do
      dependencies = []
      Pathname.new(@parameters[:name].value).ascend do |parent|
        dependencies.unshift parent.to_s
      end
      dependencies[0..-2]
    end

    # Autobefore the mount point's child file paths
    autobefore(:file) do
      dependencies = []
      file_resources = catalog.resources.select { |resource| resource.type == :file }
      children_file_resources = file_resources.select { |resource| File.expand_path(resource[:path]) =~ %r(^#{self[:name]}/.) }
      children_file_resources.each do |child|
        dependencies.push Pathname.new(child[:path])
      end
      dependencies
    end
  end
end