require "moip2"

require "vcr"
require "webmock"

# This file was generated by the `rspec --init` command. Conventionally, all
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
# The generated `.rspec` file contains `--require spec_helper` which will cause this
# file to always be loaded, without a need to explicitly require it in any files.
#
# Given that it is always loaded, you are encouraged to keep this file as
# light-weight as possible. Requiring heavyweight dependencies from this file
# (such as loading up an entire rails app) will add to the boot time of your
# test suite on EVERY test run, even for an individual file that may not need
# all of that loaded.
#
# The `.rspec` file also contains a few flags that are not defaults but that
# users commonly want.
#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
=begin
  # These two settings work together to allow you to limit a spec run
  # to individual examples or groups you care about by tagging them with
  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
  # get run.
  config.filter_run :focus
  config.run_all_when_everything_filtered = true

  # Many RSpec users commonly either run the entire suite or an individual
  # file, and it's useful to allow more verbose output when running an
  # individual spec file.
  if config.files_to_run.one?
    # RSpec filters the backtrace by default so as not to be so noisy.
    # This causes the full backtrace to be printed when running a single
    # spec file (e.g. to troubleshoot a particular spec failure).
    config.full_backtrace = true

    # Use the documentation formatter for detailed output,
    # unless a formatter has already been configured
    # (e.g. via a command-line flag).
    config.formatter = 'doc' if config.formatters.none?
  end

  # Print the 10 slowest examples and example groups at the
  # end of the spec run, to help surface which specs are running
  # particularly slow.
  config.profile_examples = 10

  # Run specs in random order to surface order dependencies. If you find an
  # order dependency and want to debug it, you can fix the order by providing
  # the seed, which is printed after each run.
  #     --seed 1234
  config.order = :random

  # Seed global randomization in this process using the `--seed` CLI option.
  # Setting this allows you to use `--seed` to deterministically reproduce
  # test failures related to randomization by passing the same `--seed` value
  # as the one that triggered the failure.
  Kernel.srand config.seed

  # rspec-expectations config goes here. You can use an alternate
  # assertion/expectation library such as wrong or the stdlib/minitest
  # assertions if you prefer.
  config.expect_with :rspec do |expectations|
    # Enable only the newer, non-monkey-patching expect syntax.
    # For more details, see:
    #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
    expectations.syntax = :expect
  end

  # rspec-mocks config goes here. You can use an alternate test double
  # library (such as bogus or mocha) by changing the `mock_with` option here.
  config.mock_with :rspec do |mocks|
    # Enable only the newer, non-monkey-patching expect syntax.
    # For more details, see:
    #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
    mocks.syntax = :expect

    # Prevents you from mocking or stubbing a method that does not exist on
    # a real object. This is generally recommended.
    mocks.verify_partial_doubles = true
  end
=end
end

VCR.configure do |c|
  c.cassette_library_dir = 'vcr_cassettes'
  c.hook_into :webmock # or :fakeweb
end

# Helper methods
def sandbox_auth
  Moip2::Auth::Basic.new('01010101010101010101010101010101', 'ABABABABABABABABABABABABABABABABABABABAB')
end

def sandbox_oauth
  Moip2::Auth::OAuth.new "d63tz2xwyu0ewrembove4j5cbv2otpd"
end

def sandbox_client
  Moip2::Client.new(:sandbox, sandbox_auth)
end

def sandbox_oauth_client
  Moip2::Client.new :sandbox, sandbox_oauth
end

def sanbox_client_with_header
  Moip2::Client.new(:sandbox, sandbox_auth, { headers: { "Moip-Account" => "MPA-UY765TYBL912" } } )
end