= Phusion Passenger users guide, Nginx version =

image:images/phusion_banner.png[link="http://www.phusion.nl/"]

Phusion Passenger is an application server which can directly integrate into Nginx. It is designed to be easy to use, fast, stable and reliable and is used by link:http://trends.builtwith.com/Web-Server/Phusion-Passenger[hundreds of thousands of websites] all over the world.

Phusion Passenger is a so-called polyglot application server because it supports applications written in multiple programming languages. At this time, Ruby and Python are supported.

This users guide will teach you:

- How to install Nginx with Phusion Passenger support.
- How to configure Phusion Passenger.
- How to deploy Ruby and Python applications.
- How to solve common problems.

This guide assumes that the reader is somewhat familiar with Nginx and with
using the command line.


== Support information

include::users_guide_snippets/support_information.txt[]

[[installation]]
== Installation

include::users_guide_snippets/installation.txt[]


[[deploying_a_ror_app]]
== Deploying a Ruby on Rails 1.x or 2.x (but NOT Rails >= 3) application ==

Suppose you have a Ruby on Rails application in '/webapps/mycook', and you own
the domain 'www.mycook.com'. You can either deploy your application to the
virtual host's root (i.e. the application will be accessible from the root URL,
'http://www.mycook.com/'), or in a sub URI (i.e. the application will be
accessible from a sub URL, such as 'http://www.mycook.com/railsapplication').

NOTE: The default `RAILS_ENV` environment in which deployed Rails applications
are run, is ``production''. You can change this by changing the
<<RailsEnv,rails_env>> configuration option.

=== Deploying to a virtual host's root ===

Add a 'server' virtual host entry to your Nginx configuration file. The virtual
host's root must point to your Ruby on Rails application's 'public' folder.

Inside the 'server' block, set 'passenger_enabled on'.

For example:
-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.mycook.com;
        root /webapps/mycook/public;
        passenger_enabled on;
    }

    ...
}
-------------------------------------------
Then restart Nginx. The application has now been deployed.

[[deploying_rails_to_sub_uri]]
=== Deploying to a sub URI ===

Suppose that you already have a virtual host for the application `/websites/phusion`:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;
        passenger_enabled on;
    }

    ...
}
-------------------------------------------

And you want your Rails application, located in `/websites/rails`, to be accessible from the URL
'http://www.phusion.nl/subapp'.

To do this, you need to perform the following:

 1. Create a `location` with parameter `~ ^/<SUBURI>(/.*|$)`. This is a regular expression that says: "match everything that is exactly <SUBURI>, or starts with <SUBDURI>/".
 2. Inside the location block, set `alias <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>$1`.
 3. Inside the location block, set `passenger_base_uri <SUBURI>`.
 4. Inside the location block, set `passenger_app_root <PATH TO YOUR APPLICATION ROOT>`.
 5. Inside the location block, set `passenger_document_root <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>`.
 6. Inside the location block, re-specify `passenger_enabled on`.

Here is an example:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;

        # This block has been added.
        location ~ ^/subapp(/.*|$) {
            alias /websites/rails/public$1;  # <-- be sure to point to 'public'!
            passenger_base_uri /subapp;
            passenger_app_root /websites/rails;
            passenger_document_root /websites/rails/public;
            passenger_enabled on;
        }
    }

    ...
}
-------------------------------------------

Then restart Nginx. The application has now been deployed on the sub-URI.

=== Redeploying (restarting the Ruby on Rails application) ===

Deploying a new version of a Ruby on Rails application is as simple as
re-uploading the application files, and restarting the application.

There are two ways to restart the application:

1. By restarting Nginx.
2. By creating or modifying the file 'tmp/restart.txt' in the Rails
   application's <<application_root,root folder>>. Phusion Passenger will
   automatically restart the application during the next request.

For example, to restart our example MyCook application, we type this in the
command line:
-------------------------------------------
touch /webapps/mycook/tmp/restart.txt
-------------------------------------------

Please note that, unlike earlier versions of Phusion Passenger, 'restart.txt'
is not automatically deleted. Phusion Passenger checks whether the timestamp
of this file has changed in order to determine whether the application should
be restarted.

=== Migrations ===

Phusion Passenger is not related to Ruby on Rails migrations in any way. To
run migrations on your deployment server, please login to your deployment
server (e.g. with 'ssh') and type `rake db:migrate RAILS_ENV=production` in
a shell console, just like one would normally run migrations.

=== Capistrano integration ===

See <<capistrano,Capistrano recipe>>.


[[deploying_a_rack_app]]
== Deploying a Rack-based Ruby application (including Rails >= 3) ==

Phusion Passenger supports arbitrary Ruby web applications that follow the
link:http://rack.rubyforge.org/[Rack] interface.

Phusion Passenger assumes that Rack application directories have a certain layout.
Suppose that you have a Rack application in '/webapps/rackapp'. Then that
folder must contain at least three entries:

- 'config.ru', a Rackup file for starting the Rack application. This file must contain
  the complete logic for initializing the application.
- 'public/', a folder containing public static web assets, like images and stylesheets.
- 'tmp/', used for 'restart.txt' (our application restart mechanism). This will
  be explained in a following subsection.

So '/webapps/rackapp' must, at minimum, look like this:
----------------------
/webapps/rackapp
  |
  +-- config.ru
  |
  +-- public/
  |
  +-- tmp/
----------------------

Suppose you own the domain 'www.rackapp.com'. You can either deploy your application
to the virtual host's root (i.e. the application will be accessible from the root URL,
'http://www.rackapp.com/'), or in a sub URI (i.e. the application will be
accessible from a sub URL, such as 'http://www.rackapp.com/rackapp').

NOTE: The default `RACK_ENV` environment in which deployed Rack applications
are run, is ``production''. You can change this by changing the
<<RackEnv,rack_env>> configuration option.

=== Tutorial/example: writing and deploying a Hello World Rack application ===

First we create a Phusion Passenger-compliant Rack directory structure:

-------------------------------------------
$ mkdir /webapps/rack_example
$ mkdir /webapps/rack_example/public
$ mkdir /webapps/rack_example/tmp
-------------------------------------------

Next, we write a minimal "hello world" Rack application:

-------------------------------------------
$ cd /webapps/rack_example
$ some_awesome_editor config.ru
...type in some source code...
$ cat config.ru
app = proc do |env|
    [200, { "Content-Type" => "text/html" }, ["hello <b>world</b>"]]
end
run app
-------------------------------------------

Finally, we deploy it by adding the following configuration options to
the Nginx configuration file:

-------------------------------------------
http {
    ...
    server {
        listen 80;
        server_name www.rackexample.com;
        root /webapps/rack_example/public;
        passenger_enabled on;
    }
    ...
}
-------------------------------------------

And we're done! After an Nginx restart, the above Rack application will be available
under the URL 'http://www.rackexample.com/'.

=== Deploying to a virtual host's root ===

Add a 'server' virtual host entry to your Nginx configuration file. The virtual host's
root must point to your Rack application's 'public' folder. You must also set
'passenger_enabled on' in the 'server' block.

For example:
-------------------------------------------
http {
    ...
    server {
        listen 80;
        server_name www.rackapp.com;
        root /webapps/rackapp/public;
        passenger_enabled on;
    }
    ...
}
-------------------------------------------
Then restart Nginx. The application has now been deployed.

[[deploying_rack_to_sub_uri]]
=== Deploying to a sub URI ===

Suppose that you already have a virtual host for the application `/websites/phusion`:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;
        passenger_enabled on;
    }

    ...
}
-------------------------------------------

And you want your Rack application, located in `/websites/rack`, to be accessible from the URL
'http://www.phusion.nl/subapp'.

To do this, you need to perform the following:

 1. Create a `location` with parameter `~ ^/<SUBURI>(/.*|$)`. This is a regular expression that says: "match everything that is exactly <SUBURI>, or starts with <SUBDURI>/".
 2. Inside the location block, set `alias <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>$1`.
 3. Inside the location block, set `passenger_base_uri <SUBURI>`.
 4. Inside the location block, set `passenger_app_root <PATH TO YOUR APPLICATION ROOT>`.
 5. Inside the location block, set `passenger_document_root <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>`.
 6. Inside the location block, re-specify `passenger_enabled on`.

Here is an example:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;

        # This block has been added.
        location ~ ^/subapp(/.*|$) {
            alias /websites/rack/public$1;  # <-- be sure to point to 'public'!
            passenger_base_uri /subapp;
            passenger_app_root /websites/rack;
            passenger_document_root /websites/rack/public;
            passenger_enabled on;
        }
    }

    ...
}
-------------------------------------------
Then restart Nginx. The application has now been deployed on the sub-URI.

=== Redeploying (restarting the Rack application) ===

Deploying a new version of a Rack application is as simple as
re-uploading the application files, and restarting the application.

There are two ways to restart the application:

1. By restarting Nginx.
2. By creating or modifying the file 'tmp/restart.txt' in the Rack
   application's <<application_root,root folder>>. Phusion Passenger will
   automatically restart the application.

For example, to restart our example application, we type this in the
command line:
-------------------------------------------
touch /webapps/rackapp/tmp/restart.txt
-------------------------------------------

=== Rackup specifications for various web frameworks ===
include::users_guide_snippets/rackup_specifications.txt[]


[[deploying_a_wsgi_app]]
== Deploying a WSGI (Python) application

Phusion Passenger supports all WSGI-compliant Python web applications. Suppose that you have a WSGI application in '/webapps/wsgiapp'. Then that folder must contain at least three entries:

- 'passenger_wsgi.py', which Phusion Passenger will use as the main entry point for your application. This file must export a WSGI object called `application`.
- 'public/', a folder containing public static web assets, like images and stylesheets.
- 'tmp/', used for 'restart.txt' (our application restart mechanism). This will be explained in a following subsection.

So '/webapps/wsgiapp' must, at minimum, look like this:
----------------------
/webapps/wsgiapp
  |
  +-- config.ru
  |
  +-- public/
  |
  +-- tmp/
----------------------

=== Tutorial/example: writing and deploying a Hello World WSGI application ===

First we create a Phusion Passenger-compliant WSGI directory structure:

-------------------------------------------
$ mkdir /webapps/wsgi_example
$ mkdir /webapps/wsgi_example/public
$ mkdir /webapps/wsgi_example/tmp
-------------------------------------------

Next, we write a minimal "hello world" WSGI application:

-------------------------------------------
$ cd /webapps/wsgi_example
$ some_awesome_editor passenger_wsgi.py
...type in some source code...
$ cat passenger_wsgi.py
def application(environ, start_response):
  start_response('200 OK', [('Content-Type', 'text/plain')])
  return [b"hello world!\n"]
-------------------------------------------

Finally, we deploy it by adding the following configuration options to
the Nginx configuration file:

-------------------------------------------
http {
    ...
    server {
        listen 80;
        server_name www.wsgiexample.com;
        root /webapps/wsgi_example/public;
        passenger_enabled on;
    }
    ...
}
-------------------------------------------

And we're done! After an Nginx restart, the above WSGI application will be available
under the URL 'http://www.wsgiexample.com/'.

=== Deploying to a virtual host's root ===

Add a 'server' virtual host entry to your Nginx configuration file. The virtual host's
root must point to your WSGI application's 'public' folder. You must also set
'passenger_enabled on' in the 'server' block.

For example:
-------------------------------------------
http {
    ...
    server {
        listen 80;
        server_name www.wsgiapp.com;
        root /webapps/wsgiapp/public;
        passenger_enabled on;
    }
    ...
}
-------------------------------------------
Then restart Nginx. The application has now been deployed.

[[deploying_wsgi_to_sub_uri]]
=== Deploying to a sub URI ===

Suppose that you already have a virtual host for the application `/websites/phusion`:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;
        passenger_enabled on;
    }

    ...
}
-------------------------------------------

And you want your WSGI application, located in `/websites/wsgi`, to be accessible from the URL
'http://www.phusion.nl/subapp'.

To do this, you need to perform the following:

 1. Create a `location` with parameter `~ ^/<SUBURI>(/.*|$)`. This is a regular expression that says: "match everything that is exactly <SUBURI>, or starts with <SUBDURI>/".
 2. Inside the location block, set `alias <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>$1`.
 3. Inside the location block, set `passenger_base_uri <SUBURI>`.
 4. Inside the location block, set `passenger_app_root <PATH TO YOUR APPLICATION ROOT>`.
 5. Inside the location block, set `passenger_document_root <PATH TO YOUR APPLICATION'S PUBLIC DIRECTORY>`.
 6. Inside the location block, re-specify `passenger_enabled on`.

Here is an example:

-------------------------------------------
http {
    ...

    server {
        listen 80;
        server_name www.phusion.nl;
        root /websites/phusion;

        # This block has been added.
        location ~ ^/subapp(/.*|$) {
            alias /websites/wsgi/public$1;  # <-- be sure to point to 'public'!
            passenger_base_uri /subapp;
            passenger_app_root /websites/wsgi;
            passenger_document_root /websites/wsgi/public;
            passenger_enabled on;
        }
    }

    ...
}
-------------------------------------------

Then restart Nginx. The application has now been deployed on the sub-URI.

=== Redeploying (restarting the WSGI application) ===

Deploying a new version of a WSGI application is as simple as
re-uploading the application files, and restarting the application.

There are two ways to restart the application:

1. By restarting Nginx.
2. By creating or modifying the file 'tmp/restart.txt' in the WSGI
   application's <<application_root,root folder>>. Phusion Passenger will
   automatically restart the application.

For example, to restart our example application, we type this in the
command line:
-------------------------------------------
touch /webapps/wsgiapp/tmp/restart.txt
-------------------------------------------


== Deploying a Node.js application

Please refer to link:https://github.com/phusion/passenger/wiki/Phusion-Passenger%3A-Node.js-tutorial[the Node.js tutorial].


== Deploying a Meteor application

Please refer to link:https://github.com/phusion/passenger/wiki/Phusion-Passenger:-Meteor-tutorial[the Meteor tutorial].


== Configuring Phusion Passenger ==

After installation, Phusion Passenger does not need any further configurations.
Nevertheless, the system administrator may be interested in changing
Phusion Passenger's behavior. Phusion Passenger supports the following configuration
options in the Nginx configuration file:

=== passenger_root <directory> ===
The location to the Phusion Passenger root directory. This configuration option
is essential to Phusion Passenger, and allows Phusion Passenger to locate its own
data files. The correct value is given by the installer.

If you've moved Phusion Passenger to a different directory then you need to update
this option as well. Please read
<<moving_phusion_passenger,Moving Phusion Passenger to a different directory>> for more information.

This required option may only occur once, in the 'http' configuration block.

NOTE: This option has no effect when you are using <<flying_passenger,Flying Passenger>>.

=== Deployment options

==== passenger_enabled <on|off>
This option may be specified in the 'http' configuration block, a
'server' configuration block, a 'location' configuration block or
an 'if' configuration scope, to enable or disable Phusion Passenger
for that server or that location.

Phusion Passenger is disabled by default, so you must explicitly enable
it for server blocks that you wish to serve through Phusion Passenger.
Please see <<deploying_a_rack_app,Deploying a Rack-based Ruby application>>
and <<deploying_a_wsgi_app,Deploying a WSGI (Python) application>>
for examples.

When using `location` blocks, you must re-specify `passenger_enabled` in each `location` block that you want to enable Phusion Passenger. This is because each `location` block has `passenger_enabled` turned off by default. For example:

----------------------------
server {
    listen 80;
    server_name www.foo.com;
    root /webapps/foo/public;
    passenger_enabled on;

    location /attachments {
        # Re-specify passenger_enabled here!
        passenger_enabled on;
    }
}
----------------------------

[[PassengerRuby]]
==== passenger_ruby <filename>
The `passenger_ruby` option allows one to specify the Ruby interpreter to use. Similarly, the `passenger_python` and `passenger_nodejs` options are for specifying the Python interpreter and Node.js commands, respectively.

In versions prior to 4.0.0, only a single Ruby version was supported for the entire Nginx instance, so `passenger_ruby` may only occur in the global server configuration. Also, the `passenger_python` option was not supported.

Since version 4.0.0, the `passenger_python` option was added. Also, Phusion Passenger supports multiple Ruby or Python interpreters in the same Nginx instance. And so, since version 4.0.0, this option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

The `passenger_ruby` in the `http` block - that is, the one that `passenger-install-nginx-module` outputs - is used for invoking certain Phusion Passenger tools that are written in Ruby, e.g. the internal helper script used by <<PassengerPreStart,passenger_pre_start>>. It is okay if the value refers to a different Ruby interpreter than the one you originally installed Phusion Passenger with. You can learn more about all this in <<relationship_with_ruby,Phusion Passenger and its relationship with Ruby>>.

The `passenger_ruby` directive in the `http` block is also used as the default Ruby interpreter for Ruby web apps. You don't *have* to specify a `passenger_ruby` in the `http` block though, because the default is to use the first `ruby` command found in `$PATH`.

The `passenger_python` and `passenger_nodejs` options works in a similar manner, but apply to Python and Node.js instead.

You can also override `passenger_ruby` and other directives in specific contexts if you want to use a different interpreter for that web app. For example:

------------------------------
http {
    passenger_root ...;
    
    # Use Ruby 1.8.7 by default.
    passenger_ruby /usr/bin/ruby1.8;
    # Use Python 2.6 by default.
    passenger_python /usr/bin/python2.6;
    # Use /usr/bin/node by default.
    passenger_nodejs /usr/bin/node;

    server {
        # This Rails web app will use Ruby 1.8.7
        listen 80;
        server_name www.foo.com;
        root /webapps/foo/public;
    }

    server {
        # This Rails web app will use Ruby 1.9.3, as installed by RVM
        passenger_ruby /usr/local/rvm/wrappers/ruby-1.9.3/ruby;

        listen 80;
        server_name www.bar.com;
        root /webapps/bar/public;

        # If you have a web app deployed in a sub-URI, customize
        # passenger_ruby/passenger_python inside a `location` block.
        # The web app under www.bar.com/blog will use JRuby 1.7.1
        location ~ ^/blog(/.*|$) {
            alias /websites/blog/public$1;
            passenger_base_uri /blog;
            passenger_app_root /websites/blog;
            passenger_document_root /websites/blog/public;
            passenger_enabled on;
            passenger_ruby /usr/local/rvm/wrappers/jruby-1.7.1/ruby;
        }
    }

    server {
        # This Flask web app will use Python 3.0
        passenger_python /usr/bin/python3.0;

        listen 80;
        server_name www.baz.com;
        root /webapps/baz/public;
    }
}
------------------------------

include::users_guide_snippets/rvm_helper_tool.txt[]

==== passenger_python <filename>
:version: 4.0.0
include::users_guide_snippets/since_version.txt[]

This option allows one to specify the Python interpreter to use. See <<PassengerRuby,passenger_ruby>> for more information. The default value is 'python', meaning that the Python interpreter will be looked up according to the `PATH` environment variable.

==== passenger_nodejs <filename>
:version: 4.0.24
include::users_guide_snippets/since_version.txt[]

This option allows one to specify the Node.js command to use. See <<PassengerRuby,passenger_ruby>> for more information. The default value is 'node', meaning that the Node.js command will be looked up according to the `PATH` environment variable.

[[PassengerAppEnv]]
==== passenger_app_env <string>
This option sets the value of the following environment variables:

 * `RAILS_ENV`
 * `RACK_ENV`
 * `WSGI_ENV`
 * `NODE_ENV`
 * `PASSENGER_APP_ENV`

Some web frameworks, for example Rails and Connect.js, adjust their behavior according to the value in one of these environment variables.

Phusion Passenger for Nginx sets the default value to **production**. If you're developing an Rails application then you should set this to `development`.

If you want to set other environment variables, please refer to <<env_vars_passenger_apps,Setting environment variables for Phusion Passenger-served apps>>.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'production'.

[[RailsEnv]]
==== rails_env <string>
An alias for <<PassengerAppEnv,passenger_app_env>>.

[[RackEnv]]
==== rack_env <string>
An alias for <<PassengerAppEnv,passenger_app_env>>.

[[PassengerAppRoot]]
==== passenger_app_root <path/to/root>
:version: 4.0.0
include::users_guide_snippets/since_version.txt[]
By default, Phusion Passenger assumes that the application's root directory
is the parent directory of the 'public' directory. This option allows one to
specify the application's root independently from the Nginx 'root', which
is useful if the 'public' directory lives in a non-standard place.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once.

Example:

-----------------------------
server {
    server_name test.host;
    root /var/rails/zena/sites/example.com/public;
    # normally Phusion Passenger would
    # have assumed that the application
    # root is "/var/rails/zena/sites/example.com"
    passenger_app_root /var/rails/zena;
}
-----------------------------

[[PassengerBaseURI]]
==== passenger_base_uri <uri>
Used to specify that the given URI is an distinct application that should
be served by Phusion Passenger. Please refer to the following sections for
more information:

 * <<deploying_rack_to_sub_uri,Deploying Rack to a sub URI>>
 * <<deploying_wsgi_to_sub_uri,Deploying WSGI to a sub URI>>
 * <<deploying_rails_to_sub_uri,Deploying Rails 1 and Rails 2 to a sub URI>>

It is allowed to specify this option multiple times. Do this to deploy multiple
applications in different sub-URIs under the same virtual host.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

[[PassengerDocumentRoot]]
==== passenger_document_root <path>
Used in sub-URI deployment scenarios to tell Phusion Passenger where it
should look for static files. Please refer to the following sections for
more information:

 * <<deploying_rack_to_sub_uri,Deploying Rack to a sub URI>>
 * <<deploying_wsgi_to_sub_uri,Deploying WSGI to a sub URI>>
 * <<deploying_rails_to_sub_uri,Deploying Rails 1 and Rails 2 to a sub URI>>

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once.

[[PassengerSpawnMethod]]
==== passenger_spawn_method <string>
[TIP]
."What spawn method should I use?"
=========================================================
This subsection attempts to describe spawn methods, but it's okay if you don't (want to)
understand it, as it's mostly a technical detail. You can basically follow this rule of thumb:

************************************************
If your application works on Mongrel or Thin, but not on Phusion Passenger, then set
`passenger_spawn_method` to 'direct'. Otherwise, leave it at 'smart' (the default).
************************************************

However, we do recommend you to try to understand it. The 'smart' spawn
method brings many benefits.
=========================================================

include::users_guide_snippets/passenger_spawn_method.txt[]

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'smart'.

[[PassengerLoadShellEnvvars]]
==== passenger_load_shell_envvars <on|off>
:version: 4.0.20
include::users_guide_snippets/since_version.txt[]

Enables or disables the loading of shell environment variables before spawning the application.

If this option is turned on, and the user's shell is `bash`, then applications are loaded by running them with `bash -l -c`. Otherwise, they are loaded by running them directly from the `PassengerHelperAgent` process.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'on'.

[[PassengerRollingRestarts]]
==== passenger_rolling_restarts <on|off>
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

Enables or disables support for rolling restarts through restart.txt. Normally when you
restart an application by touching restart.txt, Phusion Passenger would
shut down all application processes and spawn a new one. The spawning
of a new application process could take a while, and any requests that
come in during this time will be blocked until this first application
process has spawned.

But when rolling restarts are enabled, Phusion Passenger Enterprise will:

1. Spawn a new process in the background.
2. When it's done spawning, Phusion Passenger Enterprise will replace one of the old processes with this newly spawned one.
3. Step 1 and 2 are repeated until all processes have been replaced.

This way, visitors will not experience any delays when you are restarting your application. This allows you to, for example, upgrade your application often without degrading user experience.

Rolling restarts have a few caveat however that you should be aware of:

- Upgrading an application sometimes involves upgrading the database schema.
  With rolling restarts, there may be a point in time during which processes
  belonging to the previous version and processes belonging to the new version
  both exist at the same time. Any database schema upgrades you perform must
  therefore be backwards-compatible with the old application version.
- Because there's no telling which process will serve a request, users may
  not see changes brought about by the new version until all processes have
  been restarted. It is for this reason that you should not use rolling
  restarts in development, only in production.

Please note that this option is completely unrelated to the `passenger-config restart` command. That command always initiates a blocking restart, unless `--rolling-restart` is given.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.

==== passenger_resist_deployment_errors <on|off>
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

Enables or disables resistance against deployment errors.

Suppose you've upgraded your application and you've issues a command to restart it (by touching restart.txt), but the application code contains an error that prevents Phusion Passenger from successfully spawning a process (e.g. a syntax error). Phusion Passenger would normally display an error message in response to this.

By enabling deployment error resistance, Phusion Passenger Enterprise would instead do this:

- It passes the request to one of the existing application processes (that belong to the previous version of the application). The visitor will not see a Phusion Passenger process spawning error message.
- It logs the error to the global web server error log file.
- It sets an internal flag so that no processes for this application will be spawned (even when the current traffic would normally result in more processes being spawned) and no processes will be idle cleaned. Processes *could* still be shutdown because of other events, e.g. because their <<PassengerMemoryLimit,memory limit>> have been reached.

This way, visitors will suffer minimally from deployment errors. Phusion Passenger will attempt to restart the application again next time restart.txt is touched.

Enabling deployment error resistance only works if <<PassengerRollingRestarts,rolling restart>> is also enabled.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.

=== Connection handling options ===

==== passenger_ignore_client_abort <on|off> ====
Normally, when the HTTP client aborts the connection (e.g. when the user clicked on "Stop"
in the browser), the connection with the application process will be closed too. If the
application process continues to send its response, then that will result in EPIPE errors
in the application, which will be printed in the error log if the application doesn't
handle them gracefully.

If this option is turned on then upon client abort Phusion Passenger will continue to
read the application process's response while discarding all the read data. This prevents
EPIPE errors but it'll also mean the backend process will be unavailable for new requests
until it is done sending its response.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.

[[passenger_set_cgi_param]]
==== passenger_set_cgi_param <CGI environment name> <value> ====
Allows one to define additional CGI environment variables to pass to the web
application. This is comparable to ngx_http_fastcgi_module's 'fastcgi_param'
directive, and to ngx_http_proxy_module's 'proxy_set_header' option.
Nginx variables in the value are interpolated.

These variables passed in the following manner:

 * On every request, in the form of a request variable.
 * During application spawning, in the form of a system environment variable that can be looked up through `getenv()`.

Example usage:
------------------------------
# Application will see a CGI environment "APP_NAME" with value "my super blog".
passenger_set_cgi_param APP_NAME "my super blog";

# Nginx variables are interpolated.
passenger_set_cgi_param EXTRA_REQUEST_METHOD method=$request_method;
------------------------------

.Use CGI environment names
[NOTE]
===============================================
If you want to set an HTTP header, then you must set it in the CGI environment name
format, i.e. 'HTTP_*':

------------------------------
# !!!THIS IS WRONG!!! Don't do this!
passenger_set_cgi_param X-Forwarded-For 127.0.0.2;

# Instead, write it like this:
passenger_set_cgi_param HTTP_X_FORWARDED_FOR 127.0.0.2;
------------------------------
===============================================

.This configuration option is NOT inherited across contexts
[WARNING]
===============================================
In each new context (e.g. in each new 'location' block), you must re-specify `passenger_set_cgi_param`. Values set in parent contexts have no effect on subcontexts. For example:

------------------------------
server {
    ...
    passenger_set_cgi_param FOO foo;

    location /users {
        passenger_enabled_on;
        # !!!THIS IS WRONG!!! The 'FOO' CGI variable will not
        # be passed URLs beginning with /users because you didn't
        # re-specify passenger_set_cgi_param.
    }

    location /apps {
        passenger_enabled on;
        # This is correct. Here we re-specify passenger_set_cgi_param,
        # so the 'FOO' CGI variable will be correctly passed to URLs
        # starting with /apps.
        passenger_set_cgi_param FOO foo;
    }
}
------------------------------
===============================================

This option may occur in the following places:

 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

==== passenger_pass_header <header name> ====
Some headers generated by backend applications are not forwarded to the HTTP client,
e.g. 'X-Accel-Redirect' which is directly processed by Nginx and then discarded from
the final response. This directive allows one to force Nginx to pass those headers
anyway, similar to how 'proxy_pass_header' works.

For example:

------------------------------
location / {
   passenger_pass_header X-Accel-Redirect;
}
------------------------------

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

==== passenger_buffer_response <on|off> ====
When turned on, application-generated responses are buffered by Nginx. Buffering will
happen in memory and also on disk if the response is larger than a certain threshold.

Before we proceed with explaining this configuration option, we want to state the following to avoid confusion. If you use Phusion Passenger for Nginx, there are in fact two response buffering systems active:

1. The Nginx response buffering system. `passenger_buffer_response` turns this on or off.
2. The Phusion Passenger response buffering system, a.k.a. 'real-time disk-backed response buffering'. This buffering system is always on, regardless of the value of `passenger_buffer_response`.

Response buffering is useful because it protects against slow HTTP clients that do not read responses immediately or quickly enough. Buffering prevents such slow clients from blocking web applications that have limited concurrency. Because Phusion Passenger's response buffering is always turned on, you are always protected. Therefore, `passenger_buffer_response` is off by default, and you never should have to turn it on.

If for whatever reason you want to turn Nginx-level response buffering on, you can do so with this option.

Nginx's response buffering works differently from Phusion Passenger's. Nginx's buffering system buffers the entire response before attempting to send it to the client, while Phusion Passenger's attempts to send the data to the client immediately. Therefore, if you turn on `passenger_buffer_response`, you may interfere with applications that want to stream responses to the client.

How does response buffering - whether it's done by Nginx or by Phusion Passenger - exactly protect against slow clients?
Consider an HTTP client that's on a dial-up modem link, and your
application process generates a 2 MB response. If the response is buffered
then your application process will be blocked until the entire 2 MB has been
sent out to the HTTP client. This disallows your application process to do any useful
work in the mean time. By buffering responses, Phusion Passenger or Nginx will read
the application response as quickly as possible and will take care of forwarding the data
to slow clients.

So keep in mind that enabling `passenger_buffering_response` will make streaming responses
impossible. Consider for example this piece of Rails code:

--------------------------------
render :text => lambda { |response, output|
    10.times do |i|
        output.write("entry #{i}\n")
        output.flush
        sleep 1
    end
}
--------------------------------

...or this piece of Rack code:

--------------------------------
class Response
    def each
        10.times do |i|
            yield("entry #{i}\n")
            sleep 1
        end
    end
end

app = lambda do |env|
    [200, { "Content-Type" => "text/plain" }, Response.new]
end
--------------------------------

When `passenger_buffer_response` is turned on, Nginx will wait until
the application is done sending the entire response before forwarding it
to the client. The client will not receive anything for 10 seconds,
after which it receives the entire response at once.
When `passenger_buffer_response` is turned off, it works as expected: the client
receives an "entry X" message every second for 10 seconds.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.

==== passenger_buffer_size ====
==== passenger_buffers ====
==== passenger_busy_buffer_size ====
These options have the same effect as proxy_module's similarly named options.
They can be used to modify the maximum allowed HTTP header size.

[[passenger_intercept_errors]]
==== passenger_intercept_errors <on|off> ====
:version: 4.0.15
include::users_guide_snippets/since_version.txt[]

Decides if Nginx will intercept responses with HTTP status codes of 400 and higher.

By default, all responses are sent as-is from the application or from the Phusion Passenger core. If you turn this option on then Nginx will be able to handle such responses using the Nginx `error_page` option. Responses with status codes that do not match an `error_page` option are sent as-is.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.

[[passenger_max_request_queue_size]]
==== passenger_max_request_queue_size <number> ====
:version: 4.0.15
include::users_guide_snippets/since_version.txt[]

When all application processes are already handling their maximum number of concurrent requests, Phusion Passenger will queue all incoming requests. This option specifies the maximum size for that queue. If the queue is already at this specified limit, then Phusion Passenger will immediately send a "503 Service Unavailable" error to any incoming requests. You may use <<passenger_request_queue_overflow_status_code,passenger_request_queue_overflow_status_code>> to customize the response status.

A value of 0 means that the queue is unbounded.

link:http://stackoverflow.com/questions/20402801/what-is-optimal-value-for-phusion-passenger-passengermaxrequestqueuesize[This article on StackOverflow] explains how the request queue works, what it means for the queue to grow or become full, why that is bad, and what you can do about it.

You may combine this option with <<passenger_intercept_errors,passenger_intercept_errors>> and `error_page` to set a custom error page whenever the queue is full. In the following example, Nginx will serve /error503.html whenever the queue is full:

---------------------------------
passenger_intercept_errors on;
error_page 503 /error503.html;
---------------------------------

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '100'.

[[passenger_request_queue_overflow_status_code]]
==== passenger_request_queue_overflow_status_code <code> ====
:version: 4.0.15
include::users_guide_snippets/since_version.txt[]

This option allows you to customize the HTTP status code that is sent back when the request queue is full. See <<passenger_max_request_queue_size,passenger_max_request_queue_size>> for more information.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '503'.

=== Security options ===
[[PassengerUserSwitching]]
==== passenger_user_switching <on|off> ====
Whether to enable <<user_switching,user switching support>>.

This option may only occur once, in the 'http' configuration block.
The default value is 'on'.

NOTE: This option has no effect when you are using <<flying_passenger,Flying Passenger>>. You can disable user switching for Flying Passenger by starting the Flying Passenger daemon as a non-root user.

[[PassengerUser]]
==== passenger_user <username> ====
If <<user_switching,user switching support>> is enabled, then Phusion Passenger will
by default run the web application as the owner of the file 'config/environment.rb'
(for Rails apps) or 'config.ru' (for Rack apps). This option allows you to override
that behavior and explicitly set a user to run the web application as, regardless
of the ownership of 'environment.rb'/'config.ru'.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once.

[[PassengerGroup]]
==== passenger_group <group name> ====
If <<user_switching,user switching support>> is enabled, then Phusion Passenger will
by default run the web application as the primary group of the owner of the file
'config/environment.rb' (for Rails apps) or 'config.ru' (for Rack apps). This option
allows you to override that behavior and explicitly set a group to run the web application
as, regardless of the ownership of 'environment.rb'/'config.ru'.

'<group name>' may also be set to the special value '!STARTUP_FILE!', in which case
the web application's group will be set to 'environment.rb'/'config.ru''s group.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once.

[[PassengerDefaultUser]]
==== passenger_default_user <username> ====
Phusion Passenger enables <<user_switching,user switching support>> by default.
This configuration option allows one to specify the user that applications must
run as, if user switching fails or is disabled.

This option may only occur once, in the 'http' configuration block.
The default value is 'nobody'.

NOTE: This option has no effect when you are using <<flying_passenger,Flying Passenger>>. There is currently no way to set this option when using Flying Passenger, but if you want to disable user switching for Flying Passenger then you can do so by starting the Flying Passenger daemon as a non-root user.

[[PassengerDefaultGroup]]
==== Passenger_default_group <group name> ====
Phusion Passenger enables <<user_switching,user switching support>> by default.
This configuration option allows one to specify the group that applications must
run as, if user switching fails or is disabled.

This option may only occur once, in the 'http' configuration block.
The default value is the primary group of the user specifified by
<<PassengerDefaultUser,passenger_default_user>>.

NOTE: This option has no effect when you are using <<flying_passenger,Flying Passenger>>. There is currently no way to set this option when using Flying Passenger, but if you want to disable user switching for Flying Passenger then you can do so by starting the Flying Passenger daemon as a non-root user.

==== passenger_show_version_in_header <on|off> ====
When turned on, Phusion Passenger will output its version number in the `Server` and `X-Powered-By` header in all Phusion Passenger-served requests:

----------------------------------------------------
Server: nginx/1.3.11 + Phusion Passenger 4.0.0
X-Powered-By: Phusion Passenger 4.0.0
----------------------------------------------------

When turned off, the version number will be hidden:

----------------------------------------------------
Server: nginx/1.3.11 + Phusion Passenger
X-Powered-By: Phusion Passenger
----------------------------------------------------

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'on'.

[[PassengerFriendlyErrorPages]]
==== passenger_friendly_error_pages <on|off> ====
Phusion Passenger can display friendly error pages whenever an application fails
to start. This friendly error page presents the startup error message, some
suggestions for solving the problem, and a backtrace. This feature is very useful
during application development and useful for less experienced system administrators,
but the page might reveal potentially sensitive information, depending on the
application. Experienced system administrators who are using Phusion Passenger
on serious production servers should consider turning this feature off.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'on'.

=== Resource control and optimization options ===
[[PassengerMaxPoolSize]]
==== passenger_max_pool_size <integer> ====
The maximum number of <<application_process,application processes>> that may
simultanously exist. A larger number results in higher memory usage,
but improves the ability to handle concurrent HTTP requests.

The optimal value depends on your system's hardware and your workload. You can learn more at the Phusion article link:http://blog.phusion.nl/2013/03/12/tuning-phusion-passengers-concurrency-settings/[Tuning Phusion Passenger's concurrency settings].

If you find that your server is running out of memory then you should lower this value.

This option may only occur once, in the 'http' configuration block.
The default value is '6'.

:option: `--max-pool-size`
include::users_guide_snippets/alternative_for_flying_passenger.txt[]

[[PassengerMinInstances]]
==== passenger_min_instances <integer> ====
This specifies the minimum number of application processes that should exist for a
given application. You should set this option to a
non-zero value if you want to avoid potentially long startup times after a website
has been <<idle_process,idle>> for an extended period.

Please note that this option does *not* pre-start application processes during Nginx
startup. It just makes sure that when the application is first accessed:

1. at least the given number of processes will be spawned.
2. the given number of processes will be kept around even when processes are being
   idle cleaned (see <<PassengerPoolIdleTime,passenger_pool_idle_time>>).

If you want to pre-start application processes during Nginx startup, then you should use the <<PassengerPreStart,passenger_pre_start>> directive, possibly in combination with
'passenger_min_instances'. This behavior might seem counter-intuitive at first sight,
but <<PassengerPreStart,passenger_pre_start>> explains the rationale behind it.

For example, suppose that you have the following configuration:

---------------------------------
http {
    ...
    passenger_max_pool_size 15;
    passenger_pool_idle_time 10;

    server {
        listen 80;
        server_name foobar.com;
        root /webapps/foobar/public;
        passenger_min_instances 3;
    }
}
---------------------------------

When you start Nginx, there are 0 application processes for 'foobar.com'. Things will
stay that way until someone visits 'foobar.com'. Suppose that there is only 1 visitor.
1 application process will be started immediately to serve the visitor, while 2 will
be spawned in the background. After 10 seconds, when the idle timeout has
been reached, these 3 application processes will not be cleaned up.

Now suppose that there's a sudden spike of traffic, and 100 users visit 'foobar.com'
simultanously. Phusion Passenger will start 12 more application processes. After the idle
timeout of 10 seconds have passed, Phusion Passenger will clean up 12 application
processes, keeping 3 processes around.

The passenger_min_instances option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '1'.

[[PassengerMaxInstances]]
==== passenger_max_instances <integer> ====
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

The maximum number of application processes that may simultaneously exist
for an application. This helps to make sure that a single application
will not occupy all available slots in the application pool.

This value must be less than <<PassengerMaxPoolSize,passenger_max_pool_size>>. A value of 0
means that there is no limit placed on the number of processes a single application
may spawn, i.e. only the global limit of <<PassengerMaxPoolSize,passenger_max_pool_size>>
will be enforced.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '0'.

.Practical usage example
[TIP]
===========================================================================
Suppose that you're hosting two web applications on your server, a personal
blog and an e-commerce website. You've set <<PassengerMaxPoolSize,passenger_max_pool_size>>
to 10. The e-commerce website is more important to you. You can then set
'passenger_max_instances' to 3 for your blog, so that it will never spawn more
than 3 processes, even if it suddenly gets a lot of traffic. Your e-commerce website
on the other hand will be free to spawn up to 10 processes if it gets a lot of traffic.
===========================================================================

==== passenger_max_instances_per_app <integer> ====
The maximum number of application processes that may simultaneously exist
for a single application. This helps to make sure that a single application
will not occupy all available slots in the application pool.

This value must be less than <<PassengerMaxPoolSize,passenger_max_pool_size>>. A value of 0
means that there is no limit placed on the number of processes a single application
may use, i.e. only the global limit of <<PassengerMaxPoolSize,passenger_max_pool_size>>
will be enforced.

This option may only occur once, in the 'http' configuration block.
The default value is '0'.

[[PassengerPoolIdleTime]]
==== passenger_pool_idle_time <integer> ====
The maximum number of seconds that an application process may be idle. That is,
if an application process hasn't received any traffic after the given number of
seconds, then it will be shutdown in order to conserve memory.

Decreasing this value means that applications will have to be spawned
more often. Since spawning is a relatively slow operation, some visitors may
notice a small delay when they visit your Rails/Rack website. However, it will also
free up resources used by applications more quickly.

The optimal value depends on the average time that a visitor spends on a single
Rails/Rack web page. We recommend a value of `2 * x`, where `x` is the average
number of seconds that a visitor spends on a single Rails/Rack web page. But your
mileage may vary.

When this value is set to '0', application processes will not be shutdown unless 
it's really necessary, i.e. when Phusion Passenger is out of worker processes
for a given application and one of the <<inactive_process,inactive application processes>> needs to
make place for another application process. Setting the value to 0 is
recommended if you're on a non-shared host that's only running a few
applications, each which must be available at all times.

This option may only occur once, in the 'http' configuration block.
The default value is '300'.

:option: `--pool-idle-time`
include::users_guide_snippets/alternative_for_flying_passenger.txt[]

==== passenger_max_preloader_idle_time <integer> ====
The ApplicationSpawner server (explained in <<spawning_methods_explained,Spawning
methods explained>>) has an idle timeout, just like the backend processes spawned by
Phusion Passenger do. That is, it will automatically shutdown if it hasn't done
anything for a given period.

This option allows you to set the ApplicationSpawner server's idle timeout, in
seconds. A value of '0' means that it should never idle timeout.

Setting a higher value will mean that the ApplicationSpawner server is kept around
longer, which may slightly increase memory usage. But as long as the
ApplicationSpawner server is running, the time to spawn a Ruby on Rails backend
process only takes about 10% of the time that is normally needed, assuming that
you're using the 'smart' or 'smart-lv2' <<RailsSpawnMethod,spawning method>>. So if your
system has enough memory, is it recommended that you set this option to a high
value or to '0'.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '300' (5 minutes).

:option: `--max-preloader-idle-time`
include::users_guide_snippets/alternative_for_flying_passenger.txt[]

==== passenger_start_timeout <seconds> ====
:version: 4.0.15
include::users_guide_snippets/since_version.txt[]

Specifies a timeout for the startup of application processes. If an application process fails to start within the timeout period then it will be forcefully killed with SIGKILL, and the error will be logged.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '90'.

[[PassengerConcurrencyModel]]
==== passenger_concurrency_model <process|thread> ====
:version: 4.0.0
include::users_guide_snippets/enterprise_only.txt[]

Specifies the I/O concurrency model that should be used for application processes. Phusion Passenger supports two concurrency models:

 * 'process' - single-threaded, multi-processed I/O concurrency. Each application process only has a single thread and can only handle 1 request at a time. This is the concurrency model that Ruby applications traditionally used. It has excellent compatiblity (can work with applications that are not designed to be thread-safe) but is unsuitable for workloads in which the application has to wait for a lot of external I/O (e.g. HTTP API calls), and uses more memory because each process has a large memory overhead.
 * 'thread' - multi-threaded, multi-processed I/O concurrency. Each application process has multiple threads (customizable via <<PassengerThreadCount,passenger_thread_count>>). This model provides much better I/O concurrency and uses less memory because threads share memory with each other within the same process. However, using this model may cause compatibility problems if the application is not designed to be thread-safe.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'process'.

[[PassengerThreadCount]]
==== passenger_thread_count <number> ====
:version: 4.0.0
include::users_guide_snippets/enterprise_only.txt[]

Specifies the number of threads that Phusion Passenger should spawn per application process. This option only has effect if <<PassengerConcurrencyModel,passenger_concurrency_model>> is 'thread'.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '1'.

[[PassengerMaxRequests]]
==== passenger_max_requests <integer> ====
The maximum number of requests an application process will process. After
serving that many requests, the application process will be shut down and
Phusion Passenger will restart it. A value of 0 means that there is no maximum:
an application process will thus be shut down when its idle timeout has been
reached.

This option is useful if your application is leaking memory. By shutting
it down after a certain number of requests, all of its memory is guaranteed
to be freed by the operating system.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '0'.

[CAUTION]
=====================================================
The <<PassengerMaxRequests,passenger_max_requests>> directive should be considered
as a workaround for misbehaving applications. It is advised that you fix the
problem in your application rather than relying on these directives as a
measure to avoid memory leaks.
=====================================================

[[PassengerMaxRequestTime]]
==== passenger_max_request_time <seconds> ====
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

The maximum amount of time, in seconds, that an application process may take
to process a request. If the request takes longer than this amount of time,
then the application process will be forcefully shut down, and possibly
restarted upon the next request. A value of 0 means that there is no time limit.

This option is useful for preventing your application from freezing for an
indefinite period of time.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '0'.

.Example
Suppose that most of your requests are known to finish within 2 seconds.
However, there is one URI, '/expensive_computation', which is known to take up
to 10 seconds. You can then configure Phusion Passenger as follows:

----------------------------------------------
server {
    listen 80;
    server_name www.example.com;
    root /webapps/my_app/public;
    passenger_enabled on;
    passenger_max_request_time 2;
    location /expensive_compuation {
        passenger_enabled on;
        passenger_max_request_time 10;
    }
}
----------------------------------------------

If a request to '/expensive_computation' takes more than 10 seconds,
or if a request to any other URI takes more than 2 seconds,
then the corresponding application process will be forced to shutdown.

[CAUTION]
=====================================================
The <<PassengerMaxRequestTime,passenger_max_request_time>> directive should be
considered as a workaround for misbehaving applications. It is advised that you
fix the problem in your application rather than relying on these directives as a
measure to avoid freezing applications.
=====================================================

[[PassengerMemoryLimit]]
==== passenger_memory_limit <integer> ====
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

The maximum amount of memory that an application process may use, in megabytes.
Once an application process has surpassed its memory limit, it will process
all the requests currently present in its queue and then shut down.
A value of 0 means that there is no maximum: the application's memory usage
will not be checked.

This option is useful if your application is leaking memory. By shutting
it down, all of its memory is guaranteed to be freed by the operating system.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is '0'.

[NOTE]
.A word about permissions
=====================================================
The <<PassengerMemoryLimit,passenger_memory_limit>> directive uses the
`ps` command to query memory usage information. On Linux, it further
queries `/proc` to obtain additional memory usage information that's
not obtainable through `ps`. You should ensure that the `ps` works
correctly and that the `/proc` filesystem is accessible by the
`PassengerHelperAgent` process.
=====================================================

[CAUTION]
=====================================================
The <<PassengerMaxRequests,passenger_max_requests>> and
<<PassengerMemoryLimit,passenger_memory_limit>> directives should be considered
as workarounds for misbehaving applications. It is advised that you fix the
problem in your application rather than relying on these directives as a
measure to avoid memory leaks.
=====================================================

[[PassengerPreStart]]
==== passenger_pre_start <url> ====
By default, Phusion Passenger does not start any application processes until said
web application is first accessed. The result is that the first visitor of said
web application might experience a small delay as Phusion Passenger is starting
the web application on demand. If that is undesirable, then this directive can be
used to pre-started application processes during Nginx startup.

A few things to be careful of:

- This directive accepts the *URL* of the web application you want to pre-start,
  not a on/off value! This might seem a bit weird, but read on for rationale. As
  for the specifics of the URL:
  * The domain part of the URL must be equal to the value of the 'server_name'
    directive of the server block that defines the web application.
  * Unless the web application is deployed on port 80, the URL should contain
    the web application's port number too.
  * The path part of the URL must point to some URI that the web application
    handles.
- You will probably want to combine this option with
  <<PassengerMinInstances,passenger_min_instances>> because application processes
  started with 'passenger_pre_start' are subject to the usual idle timeout rules.
  See the example below for an explanation.

This option may only occur in the 'http' configuration block. It may be specified
any number of times.

NOTE: This option is currently not available when using <<flying_passenger,Flying Passenger>>.

===== Example 1: basic usage =====

Suppose that you have the following web applications.

---------------------------
server {
    listen 80;
    server_name foo.com;
    root /webapps/foo/public;
    passenger_enabled on;
}

server {
    listen 3500;
    server_name bar.com;
    root /webapps/bar/public;
    passenger_enabled on;
}
---------------------------

You want both of them to be pre-started during Nginx startup. The URL for
foo.com is 'http://foo.com/' (or, equivalently, 'http://foo.com:80/') and
the URL for bar.com is 'http://bar.com:3500/'. So we add two passenger_pre_start
directives, like this:

---------------------------
server {
    listen 80;
    server_name foo.com;
    root /webapps/foo/public;
    passenger_enabled on;
}

server {
    listen 3500;
    server_name bar.com;
    root /webapps/bar/public;
    passenger_enabled on;
}

passenger_pre_start http://foo.com/;           # <--- added
passenger_pre_start http://bar.com:3500/;      # <--- added
---------------------------

===== Example 2: pre-starting apps that are deployed in sub-URIs =====

Suppose that you have a web application deployed in a sub-URI '/store', like this:

---------------------------
server {
    listen 80;
    server_name myblog.com;
    root /webapps/wordpress;
    passenger_base_uri /store;
}
---------------------------

Then specify the 'server_name' value followed by the sub-URI, like this:

---------------------------
server {
    listen 80;
    server_name myblog.com;
    root /webapps/wordpress;
    passenger_base_uri /store;
}

passenger_pre_start http://myblog.com/store;    # <----- added
---------------------------

The sub-URI *must* be included; if you don't then the directive will have no effect.
The following example is wrong and won't pre-start the store web application:

---------------------------
passenger_pre_start http://myblog.com/;    # <----- WRONG! Missing "/store" part.
---------------------------

===== Example 3: combining with passenger_min_instances =====

Application processes started with passenger_pre_start are
also subject to the idle timeout rules as specified by
<<PassengerPoolIdleTime,passenger_pool_idle_time>>! That means that by default,
the pre-started application processes for foo.com are bar.com are shut down
after a few minutes of inactivity. If you don't want that to happen, then
you should combine passenger_pre_start with
<<PassengerMinInstances,passenger_min_instances>>, like this:

---------------------------
server {
    listen 80;
    server_name foo.com;
    root /webapps/foo/public;
    passenger_enabled on;
    passenger_min_instances 1;      # <--- added
}

server {
    listen 3500;
    server_name bar.com;
    root /webapps/bar/public;
    passenger_enabled on;
    passenger_min_instances 1;      # <--- added
}

passenger_pre_start http://foo.com/;
passenger_pre_start http://bar.com:3500/;
---------------------------

===== So why a URL? Why not just an on/off flag? =====

A directive that accepts a simple on/off flag is definitely more intuitive,
but due technical difficulties w.r.t. the way Nginx works, it's very hard
to implement it like that:

It is very hard to obtain a full list of web applications defined in the
Nginx configuration file(s). In other words, it's hard for Phusion Passenger
to know which web applications are deployed on Nginx until a web application
is first accessed, and without such a list Phusion Passenger wouldn't know
which web applications to pre-start. So as a compromise, we made it accept a
URL.

===== What does Phusion Passenger do with the URL? =====

During Nginx startup, Phusion Passenger will send a dummy HEAD request to the
given URL and discard the result. In other words, Phusion Passenger simulates a
web access at the given URL. However this simulated request is always sent to
localhost, *not* to the IP that the domain resolves to. Suppose that bar.com
in example 1 resolves to 209.85.227.99; Phusion Passenger will
send the following HTTP request to 127.0.0.1 port 3500 (and not to 209.85.227.99
port 3500):

----------------------
HEAD / HTTP/1.1
Host: bar.com
Connection: close
----------------------

Similarly, for example 2, Phusion Passenger will send the following HTTP request
to 127.0.0.1 port 80:

----------------------
HEAD /store HTTP/1.1
Host: myblog.com
Connection: close
----------------------

===== Do I need to edit /etc/hosts and point the domain in the URL to 127.0.0.1? =====

No. See previous subsection.

===== My web application consists of multiple web servers. What URL do I need to specify, and in which web server's Nginx config file? =====

Put the web application's 'server_name' value and the server block's
port in the URL, and put
passenger_pre_start on all machines that you want to pre-start the web application
on. The simulated web request is always sent to 127.0.0.1, with the domain name
in the URL as value for the 'Host' HTTP header, so you don't need to worry about
the request ending up at a different web server in the cluster.

===== Does passenger_pre_start support https:// URLs? =====

Yes. And it does not perform any certificate validation.


=== Logging and debugging options ===

[[PassengerLogLevel]]
==== passenger_log_level <integer> ====
This option allows one to specify how much information Phusion Passenger should
write to the Nginx error log file. A higher log level value means that more
information will be logged.

Possible values are:

- '0': Show only errors and warnings.
- '1': Show the most important debugging information. This might be useful for
       system administrators who are trying to figure out the cause of a
       problem.
- '2': Show more debugging information. This is typically only useful for developers.
- '3': Show even more debugging information.

This option may only occur once, in the 'http' configuration block.
The default is '0'.

==== passenger_debug_log_file <filename> ====
By default Phusion Passenger debugging and error messages are written to the global
web server error log. This option allows one to specify the file that debugging and
error messages should be written to instead.

This option may only occur once, in the 'http' configuration block.

:option: `--log-file`
include::users_guide_snippets/alternative_for_flying_passenger.txt[]

==== passenger_debugger <on|off> ====
:version: 3.0.0
include::users_guide_snippets/enterprise_only.txt[]

Turns support for application debugging on or off. In case of Ruby applications,
turning this option on will cause them to load the `ruby-debug` gem (when on Ruby 1.8),
the `debugger` gem (when on Ruby 1.9) or the `byebug` gem (when on Ruby 2.0). If you're
using Bundler, you should add this to your Gemfile:

-------------------------------------------
gem 'ruby-debug', :platforms => :ruby_18
gem 'debugger', :platforms => :ruby_19
gem 'byebug', :platforms => :ruby_20
-------------------------------------------

Once debugging is turned on, you can use the command `passenger-irb --debug <PID>` to attach an rdebug console to the application process with the given PID. Attaching will succeed once the application process executes a `debugger` command.

This option may occur in the following places:

 * In the 'http' configuration block.
 * In a 'server' configuration block.
 * In a 'location' configuration block.
 * In an 'if' configuration scope.

In each place, it may be specified at most once. The default value is 'off'.


=== Advanced options

[[PassengerTempDir]]
==== passenger_temp_dir <directory>
Specifies the directory that Phusion Passenger should use for storing temporary
files. This includes things such as Unix socket files.

This option may only be specified in the 'http' configuration block. The
default temp directory that Phusion Passenger uses is '/tmp'.

This option is especially useful if Nginx is not allowed to write to /tmp
(which is the case on some systems with strict SELinux policies) or if the
partition that /tmp lives on doesn't have enough disk space.

.Command line tools
Some Phusion Passenger command line administration tools, such as
`passenger-status`, must know what Phusion Passenger's temp directory is
in order to function properly. You can pass the directory through the
`PASSENGER_TMPDIR` environment variable, or the `TMPDIR` environment variable
(the former will be used if both are specified).

For example, if you set 'passenger_temp_dir' to '/my_temp_dir', then invoke
`passenger-status` after you've set the `PASSENGER_TMPDIR` or `TMPDIR`
environment variable, like this:

----------------------------------------------------------
export PASSENGER_TMPDIR=/my_temp-dir
sudo -E passenger-status
# The -E option tells 'sudo' to preserve environment variables.
----------------------------------------------------------

:option: `--temp-dir`
include::users_guide_snippets/alternative_for_flying_passenger.txt[]

==== passenger_fly_with <socket filename>
:version: 4.1.0
include::users_guide_snippets/enterprise_only.txt[]

Enables <<flying_passenger,Flying Passenger>> mode, and configures Nginx to connect to the Flying Passenger daemon that's listening on the given socket filename.

This option may only occur once, in the 'http' configuration block. When not set, Flying Passenger is not enabled.


=== Deprecated options ===

The following options have been deprecated, but are still supported for backwards
compatibility reasons.

==== rails_spawn_method ====
Deprecated in favor of <<PassengerSpawnMethod,passenger_spawn_method>>.


[[troubleshooting]]
== Troubleshooting ==

include::users_guide_snippets/troubleshooting/default.txt[]

=== The application thinks its not on SSL even though it is

Rails and many other frameworks infers whether it's running on SSL through the CGI
environment variable `HTTPS`. This variable is *only* set if you set `ssl on`.
Setting just `listen 443 ssl` is not enough.

include::users_guide_snippets/troubleshooting/rails.txt[]


== Analysis and system maintenance ==

include::users_guide_snippets/analysis_and_system_maintenance.txt[]


== Tips ==

include::users_guide_snippets/tips.txt[]


== Under the hood ==
Phusion Passenger hides a lot of complexity for the end user (i.e. the web server
system administrator), but sometimes it is desirable to know what is going on.
This section describes a few things that Phusion Passenger does under the hood.

include::users_guide_snippets/under_the_hood/page_caching_support.txt[]
include::users_guide_snippets/under_the_hood/relationship_with_ruby.txt[]

[[application_detection]]
=== How Phusion Passenger detects whether a virtual host is a web application ===
After you've read the deployment instructions you might wonder how Phusion Passenger
knows that the server root points to a web application that Phusion Passenger is
able to serve, and how it knows what kind of web application it is (e.g. Rails or Rack).

Phusion Passenger checks whether the virtual host is a Rails application by checking
whether the following file exists:

------------------------------------------------
dirname(DocumentRoot) + "/config/environment.rb"
------------------------------------------------

If you're not a programmer and don't understand the above pseudo-code snippet, it means
that Phusion Passenger will:

1. Extract the parent directory filename from the value of the ``root'' directive.
2. Append the text "/config/environment.rb" to the result, and check whether the resulting
   filename exists.

So suppose that your server root is '/webapps/foo/public'. Phusion Passenger will check
whether the file '/webapps/foo/config/environment.rb' exists.

Note that Phusion Passenger for Nginx does *not* resolve any symlinks in the root path.
So for example, suppose that your root points to '/home/www/example.com', which in
turn is a symlink to '/webapps/example.com/public'. Phusion Passenger for Nginx will check for
'/home/www/config/environment.rb', *not* '/webapps/example.com/config/environment.rb'.
This file of course doesn't exist, and as a result Phusion Passenger will not activate
itself for this virtual host, and you'll most likely see some output generated by the
Nginx default directory handler such as a Forbidden error message.

Detection of Rack applications happens through the same mechanism, exception that
Phusion Passenger will look for 'config.ru' instead of 'config/environment.rb'.


include::users_guide_snippets/appendix_a_about.txt[]

include::users_guide_snippets/appendix_b_terminology.txt[]

include::users_guide_snippets/appendix_c_spawning_methods.txt[]

[[about_environment_variables]]
== Appendix D: About environment variables

include::users_guide_snippets/environment_variables.txt[]