# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. module TencentCloud module Cat module V20180409 # 拨测分组 class AgentGroup < TencentCloud::Common::AbstractModel # @param GroupId: 拨测分组ID # @type GroupId: Integer # @param GroupName: 拨测分组名称 # @type GroupName: String # @param IsDefault: 是否默认拨测分组。1表示是,0表示否 # @type IsDefault: Integer # @param TaskNum: 使用本拨测分组的任务数 # @type TaskNum: Integer # @param GroupDetail: 拨测结点列表 # @type GroupDetail: Array # @param MaxGroupNum: 最大拨测分组数 # @type MaxGroupNum: Integer attr_accessor :GroupId, :GroupName, :IsDefault, :TaskNum, :GroupDetail, :MaxGroupNum def initialize(groupid=nil, groupname=nil, isdefault=nil, tasknum=nil, groupdetail=nil, maxgroupnum=nil) @GroupId = groupid @GroupName = groupname @IsDefault = isdefault @TaskNum = tasknum @GroupDetail = groupdetail @MaxGroupNum = maxgroupnum end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] @IsDefault = params['IsDefault'] @TaskNum = params['TaskNum'] unless params['GroupDetail'].nil? @GroupDetail = [] params['GroupDetail'].each do |i| catagent_tmp = CatAgent.new catagent_tmp.deserialize(i) @GroupDetail << catagent_tmp end end @MaxGroupNum = params['MaxGroupNum'] end end # 拨测告警信息 class AlarmInfo < TencentCloud::Common::AbstractModel # @param ObjName: 告警对象的名称 # @type ObjName: String # @param FirstOccurTime: 告警发生的时间 # @type FirstOccurTime: String # @param LastOccurTime: 告警结束的时间 # @type LastOccurTime: String # @param Status: 告警状态。1 表示已恢复,0 表示未恢复,2表示数据不足 # @type Status: Integer # @param Content: 告警的内容 # @type Content: String # @param TaskId: 拨测任务ID # @type TaskId: Integer # @param MetricName: 特征项名字 # @type MetricName: String # @param MetricValue: 特征项数值 # @type MetricValue: String # @param ObjId: 告警对象的ID # @type ObjId: String attr_accessor :ObjName, :FirstOccurTime, :LastOccurTime, :Status, :Content, :TaskId, :MetricName, :MetricValue, :ObjId def initialize(objname=nil, firstoccurtime=nil, lastoccurtime=nil, status=nil, content=nil, taskid=nil, metricname=nil, metricvalue=nil, objid=nil) @ObjName = objname @FirstOccurTime = firstoccurtime @LastOccurTime = lastoccurtime @Status = status @Content = content @TaskId = taskid @MetricName = metricname @MetricValue = metricvalue @ObjId = objid end def deserialize(params) @ObjName = params['ObjName'] @FirstOccurTime = params['FirstOccurTime'] @LastOccurTime = params['LastOccurTime'] @Status = params['Status'] @Content = params['Content'] @TaskId = params['TaskId'] @MetricName = params['MetricName'] @MetricValue = params['MetricValue'] @ObjId = params['ObjId'] end end # 告警主题 class AlarmTopic < TencentCloud::Common::AbstractModel # @param TopicId: 主题的ID # @type TopicId: String # @param TopicName: 主题的名称 # @type TopicName: String attr_accessor :TopicId, :TopicName def initialize(topicid=nil, topicname=nil) @TopicId = topicid @TopicName = topicname end def deserialize(params) @TopicId = params['TopicId'] @TopicName = params['TopicName'] end end # BindAlarmPolicy请求参数结构体 class BindAlarmPolicyRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer # @param PolicyGroupId: 告警策略组Id # @type PolicyGroupId: Integer # @param IfBind: 是否绑定操作。非0 为绑定, 0 为 解绑。缺省表示 绑定。 # @type IfBind: Integer # @param TopicId: 告警主题Id # @type TopicId: String attr_accessor :TaskId, :PolicyGroupId, :IfBind, :TopicId def initialize(taskid=nil, policygroupid=nil, ifbind=nil, topicid=nil) @TaskId = taskid @PolicyGroupId = policygroupid @IfBind = ifbind @TopicId = topicid end def deserialize(params) @TaskId = params['TaskId'] @PolicyGroupId = params['PolicyGroupId'] @IfBind = params['IfBind'] @TopicId = params['TopicId'] end end # BindAlarmPolicy返回参数结构体 class BindAlarmPolicyResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 拨测Agent 所在省份、运营商 class CatAgent < TencentCloud::Common::AbstractModel # @param Province: 拨测结点所在的省份(拼音缩写) # @type Province: String # @param Isp: 拨测结点所在的运营商(英文缩写) # @type Isp: String # @param ProvinceName: 拨测结点所在的省份(中文名称) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProvinceName: String # @param IspName: 拨测结点所在的运营商(中文名称) # 注意:此字段可能返回 null,表示取不到有效值。 # @type IspName: String attr_accessor :Province, :Isp, :ProvinceName, :IspName def initialize(province=nil, isp=nil, provincename=nil, ispname=nil) @Province = province @Isp = isp @ProvinceName = provincename @IspName = ispname end def deserialize(params) @Province = params['Province'] @Isp = params['Isp'] @ProvinceName = params['ProvinceName'] @IspName = params['IspName'] end end # 拨测记录 class CatLog < TencentCloud::Common::AbstractModel # @param Time: 拨测时间点 # @type Time: String # @param CatTypeName: 拨测类型 # @type CatTypeName: String # @param TaskId: 任务ID # @type TaskId: Integer # @param City: 拨测点所在城市 # @type City: String # @param Isp: 拨测点所在运营商 # @type Isp: String # @param ServerIp: 被拨测Server的IP # @type ServerIp: String # @param DomainName: 被拨测Server的域名 # @type DomainName: String # @param TotalTime: 执行耗时,单位毫秒 # @type TotalTime: Integer # @param ResultType: 成功失败(1 失败,0 成功) # @type ResultType: Integer # @param ResultCode: 失败错误码 # @type ResultCode: Integer # @param ReqPkgSize: 请求包大小 # @type ReqPkgSize: Integer # @param RspPkgSize: 回应包大小 # @type RspPkgSize: Integer # @param ReqMsg: 拨测请求 # @type ReqMsg: String # @param RespMsg: 拨测回应 # @type RespMsg: String # @param ClientIp: 客户端IP # @type ClientIp: String # @param CityName: 拨测点所在城市名称 # @type CityName: String # @param IspName: 拨测点所在运营商名称 # @type IspName: String # @param ParseTime: 解析耗时,单位毫秒 # @type ParseTime: Integer # @param ConnectTime: 连接耗时,单位毫秒 # @type ConnectTime: Integer # @param SendTime: 数据发送耗时,单位毫秒 # @type SendTime: Integer # @param WaitTime: 等待耗时,单位毫秒 # @type WaitTime: Integer # @param ReceiveTime: 接收耗时,单位毫秒 # @type ReceiveTime: Integer attr_accessor :Time, :CatTypeName, :TaskId, :City, :Isp, :ServerIp, :DomainName, :TotalTime, :ResultType, :ResultCode, :ReqPkgSize, :RspPkgSize, :ReqMsg, :RespMsg, :ClientIp, :CityName, :IspName, :ParseTime, :ConnectTime, :SendTime, :WaitTime, :ReceiveTime def initialize(time=nil, cattypename=nil, taskid=nil, city=nil, isp=nil, serverip=nil, domainname=nil, totaltime=nil, resulttype=nil, resultcode=nil, reqpkgsize=nil, rsppkgsize=nil, reqmsg=nil, respmsg=nil, clientip=nil, cityname=nil, ispname=nil, parsetime=nil, connecttime=nil, sendtime=nil, waittime=nil, receivetime=nil) @Time = time @CatTypeName = cattypename @TaskId = taskid @City = city @Isp = isp @ServerIp = serverip @DomainName = domainname @TotalTime = totaltime @ResultType = resulttype @ResultCode = resultcode @ReqPkgSize = reqpkgsize @RspPkgSize = rsppkgsize @ReqMsg = reqmsg @RespMsg = respmsg @ClientIp = clientip @CityName = cityname @IspName = ispname @ParseTime = parsetime @ConnectTime = connecttime @SendTime = sendtime @WaitTime = waittime @ReceiveTime = receivetime end def deserialize(params) @Time = params['Time'] @CatTypeName = params['CatTypeName'] @TaskId = params['TaskId'] @City = params['City'] @Isp = params['Isp'] @ServerIp = params['ServerIp'] @DomainName = params['DomainName'] @TotalTime = params['TotalTime'] @ResultType = params['ResultType'] @ResultCode = params['ResultCode'] @ReqPkgSize = params['ReqPkgSize'] @RspPkgSize = params['RspPkgSize'] @ReqMsg = params['ReqMsg'] @RespMsg = params['RespMsg'] @ClientIp = params['ClientIp'] @CityName = params['CityName'] @IspName = params['IspName'] @ParseTime = params['ParseTime'] @ConnectTime = params['ConnectTime'] @SendTime = params['SendTime'] @WaitTime = params['WaitTime'] @ReceiveTime = params['ReceiveTime'] end end # 拨测失败详情 class CatReturnDetail < TencentCloud::Common::AbstractModel # @param IspName: 运营商名称 # @type IspName: String # @param Province: 省份全拼 # @type Province: String # @param ProvinceName: 省份中文名称 # @type ProvinceName: String # @param MapKey: Map键值 # @type MapKey: String # @param ServerIp: 拨测目标的IP # @type ServerIp: String # @param ResultCount: 拨测失败个数 # @type ResultCount: Integer # @param ResultCode: 拨测失败返回码 # @type ResultCode: Integer # @param ErrorReason: 拨测失败原因描述 # @type ErrorReason: String attr_accessor :IspName, :Province, :ProvinceName, :MapKey, :ServerIp, :ResultCount, :ResultCode, :ErrorReason def initialize(ispname=nil, province=nil, provincename=nil, mapkey=nil, serverip=nil, resultcount=nil, resultcode=nil, errorreason=nil) @IspName = ispname @Province = province @ProvinceName = provincename @MapKey = mapkey @ServerIp = serverip @ResultCount = resultcount @ResultCode = resultcode @ErrorReason = errorreason end def deserialize(params) @IspName = params['IspName'] @Province = params['Province'] @ProvinceName = params['ProvinceName'] @MapKey = params['MapKey'] @ServerIp = params['ServerIp'] @ResultCount = params['ResultCount'] @ResultCode = params['ResultCode'] @ErrorReason = params['ErrorReason'] end end # 拨测失败返回情况汇总 class CatReturnSummary < TencentCloud::Common::AbstractModel # @param ResultCount: 拨测失败个数 # @type ResultCount: Integer # @param ResultCode: 拨测失败返回码 # @type ResultCode: Integer # @param ErrorReason: 拨测失败原因描述 # @type ErrorReason: String attr_accessor :ResultCount, :ResultCode, :ErrorReason def initialize(resultcount=nil, resultcode=nil, errorreason=nil) @ResultCount = resultcount @ResultCode = resultcode @ErrorReason = errorreason end def deserialize(params) @ResultCount = params['ResultCount'] @ResultCode = params['ResultCode'] @ErrorReason = params['ErrorReason'] end end # 任务信息和告警策略组 class CatTaskDetail < TencentCloud::Common::AbstractModel # @param TaskId: 任务ID # @type TaskId: Integer # @param TaskName: 任务名称 # @type TaskName: String # @param Period: 任务周期,单位为分钟。目前支持1,5,15,30几种取值 # @type Period: Integer # @param CatTypeName: 拨测类型。http, https, ping, tcp 之一 # @type CatTypeName: String # @param CgiUrl: 拨测任务的URL # @type CgiUrl: String # @param AgentGroupId: 拨测分组ID # @type AgentGroupId: Integer # @param PolicyGroupId: 告警策略组ID # @type PolicyGroupId: Integer # @param Status: 任务状态。1表示暂停,2表示运行中,0为初始态 # @type Status: Integer # @param AddTime: 任务创建时间 # @type AddTime: String # @param Type: 任务类型。0 站点监控,2 可用性监控 # @type Type: Integer # @param TopicId: 绑定的统一告警主题ID # @type TopicId: String # @param AlarmStatus: 告警状态。0 未启用,1, 启用 # @type AlarmStatus: Integer # @param Host: 指定的域名 # @type Host: String # @param Port: 拨测目标的端口号 # @type Port: Integer # @param CheckStr: 要在结果中进行匹配的字符串 # @type CheckStr: String # @param CheckType: 1 表示通过检查结果是否包含CheckStr 进行校验 # @type CheckType: Integer # @param UserAgent: 用户Agent信息 # @type UserAgent: String # @param Cookie: 设置的Cookie信息 # @type Cookie: String # @param PostData: POST 请求数据。空字符串表示非POST请求 # @type PostData: String # @param SslVer: SSL协议版本 # @type SslVer: String # @param IsHeader: 是否为Header请求。非0 Header 请求 # @type IsHeader: Integer # @param DnsSvr: 目的DNS服务器 # @type DnsSvr: String # @param DnsCheckIp: 需要检验是否在DNS IP列表的IP # @type DnsCheckIp: String # @param DnsQueryType: DNS查询类型 # @type DnsQueryType: String # @param UserName: 登录服务器的账号 # @type UserName: String # @param PassWord: 登录服务器的密码 # @type PassWord: String # @param UseSecConn: 是否使用安全链接SSL, 0 不使用,1 使用 # @type UseSecConn: Integer # @param NeedAuth: FTP登录验证方式 0 不验证 1 匿名登录 2 需要身份验证 # @type NeedAuth: Integer # @param ReqDataType: 请求数据类型。0 表示请求为字符串类型。1表示为二进制类型 # @type ReqDataType: Integer # @param ReqData: 发起TCP, UDP请求的协议请求数据 # @type ReqData: String # @param RespDataType: 响应数据类型。0 表示响应为字符串类型。1表示为二进制类型 # @type RespDataType: Integer # @param RespData: 预期的UDP请求的回应数据 # @type RespData: String # @param RedirectFollowNum: 跟随跳转次数 # @type RedirectFollowNum: Integer attr_accessor :TaskId, :TaskName, :Period, :CatTypeName, :CgiUrl, :AgentGroupId, :PolicyGroupId, :Status, :AddTime, :Type, :TopicId, :AlarmStatus, :Host, :Port, :CheckStr, :CheckType, :UserAgent, :Cookie, :PostData, :SslVer, :IsHeader, :DnsSvr, :DnsCheckIp, :DnsQueryType, :UserName, :PassWord, :UseSecConn, :NeedAuth, :ReqDataType, :ReqData, :RespDataType, :RespData, :RedirectFollowNum def initialize(taskid=nil, taskname=nil, period=nil, cattypename=nil, cgiurl=nil, agentgroupid=nil, policygroupid=nil, status=nil, addtime=nil, type=nil, topicid=nil, alarmstatus=nil, host=nil, port=nil, checkstr=nil, checktype=nil, useragent=nil, cookie=nil, postdata=nil, sslver=nil, isheader=nil, dnssvr=nil, dnscheckip=nil, dnsquerytype=nil, username=nil, password=nil, usesecconn=nil, needauth=nil, reqdatatype=nil, reqdata=nil, respdatatype=nil, respdata=nil, redirectfollownum=nil) @TaskId = taskid @TaskName = taskname @Period = period @CatTypeName = cattypename @CgiUrl = cgiurl @AgentGroupId = agentgroupid @PolicyGroupId = policygroupid @Status = status @AddTime = addtime @Type = type @TopicId = topicid @AlarmStatus = alarmstatus @Host = host @Port = port @CheckStr = checkstr @CheckType = checktype @UserAgent = useragent @Cookie = cookie @PostData = postdata @SslVer = sslver @IsHeader = isheader @DnsSvr = dnssvr @DnsCheckIp = dnscheckip @DnsQueryType = dnsquerytype @UserName = username @PassWord = password @UseSecConn = usesecconn @NeedAuth = needauth @ReqDataType = reqdatatype @ReqData = reqdata @RespDataType = respdatatype @RespData = respdata @RedirectFollowNum = redirectfollownum end def deserialize(params) @TaskId = params['TaskId'] @TaskName = params['TaskName'] @Period = params['Period'] @CatTypeName = params['CatTypeName'] @CgiUrl = params['CgiUrl'] @AgentGroupId = params['AgentGroupId'] @PolicyGroupId = params['PolicyGroupId'] @Status = params['Status'] @AddTime = params['AddTime'] @Type = params['Type'] @TopicId = params['TopicId'] @AlarmStatus = params['AlarmStatus'] @Host = params['Host'] @Port = params['Port'] @CheckStr = params['CheckStr'] @CheckType = params['CheckType'] @UserAgent = params['UserAgent'] @Cookie = params['Cookie'] @PostData = params['PostData'] @SslVer = params['SslVer'] @IsHeader = params['IsHeader'] @DnsSvr = params['DnsSvr'] @DnsCheckIp = params['DnsCheckIp'] @DnsQueryType = params['DnsQueryType'] @UserName = params['UserName'] @PassWord = params['PassWord'] @UseSecConn = params['UseSecConn'] @NeedAuth = params['NeedAuth'] @ReqDataType = params['ReqDataType'] @ReqData = params['ReqData'] @RespDataType = params['RespDataType'] @RespData = params['RespData'] @RedirectFollowNum = params['RedirectFollowNum'] end end # CreateAgentGroup请求参数结构体 class CreateAgentGroupRequest < TencentCloud::Common::AbstractModel # @param GroupName: 拨测分组名称,不超过32个字符 # @type GroupName: String # @param IsDefault: 是否为默认分组,取值可为 0 或 1。取 1 时表示设置为默认分组 # @type IsDefault: Integer # @param Agents: Province, Isp 需要成对地进行选择。参数对的取值范围。参见:DescribeAgents 的返回结果。 # @type Agents: Array attr_accessor :GroupName, :IsDefault, :Agents def initialize(groupname=nil, isdefault=nil, agents=nil) @GroupName = groupname @IsDefault = isdefault @Agents = agents end def deserialize(params) @GroupName = params['GroupName'] @IsDefault = params['IsDefault'] unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| catagent_tmp = CatAgent.new catagent_tmp.deserialize(i) @Agents << catagent_tmp end end end end # CreateAgentGroup返回参数结构体 class CreateAgentGroupResponse < TencentCloud::Common::AbstractModel # @param GroupId: 拨测分组Id # @type GroupId: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupId, :RequestId def initialize(groupid=nil, requestid=nil) @GroupId = groupid @RequestId = requestid end def deserialize(params) @GroupId = params['GroupId'] @RequestId = params['RequestId'] end end # CreateProbeTasks请求参数结构体 class CreateProbeTasksRequest < TencentCloud::Common::AbstractModel # @param BatchTasks: 批量任务名-地址 # @type BatchTasks: Array # @param TaskType: 任务类型 # @type TaskType: Integer # @param Nodes: 拨测节点 # @type Nodes: Array # @param Interval: 拨测间隔 # @type Interval: Integer # @param Parameters: 拨测参数 # @type Parameters: String # @param TaskCategory: 任务分类 #
  • 1 = PC
  • #
  • 2 = Mobile
  • # @type TaskCategory: Integer # @param Cron: 定时任务cron表达式 # @type Cron: String # @param Tag: 资源标签值 # @type Tag: Array # @param ProbeType: 测试类型,包含定时测试与即时测试 # @type ProbeType: Integer # @param PluginSource: 插件类型 # @type PluginSource: String # @param ClientNum: 客户度ID # @type ClientNum: String attr_accessor :BatchTasks, :TaskType, :Nodes, :Interval, :Parameters, :TaskCategory, :Cron, :Tag, :ProbeType, :PluginSource, :ClientNum def initialize(batchtasks=nil, tasktype=nil, nodes=nil, interval=nil, parameters=nil, taskcategory=nil, cron=nil, tag=nil, probetype=nil, pluginsource=nil, clientnum=nil) @BatchTasks = batchtasks @TaskType = tasktype @Nodes = nodes @Interval = interval @Parameters = parameters @TaskCategory = taskcategory @Cron = cron @Tag = tag @ProbeType = probetype @PluginSource = pluginsource @ClientNum = clientnum end def deserialize(params) unless params['BatchTasks'].nil? @BatchTasks = [] params['BatchTasks'].each do |i| probetaskbasicconfiguration_tmp = ProbeTaskBasicConfiguration.new probetaskbasicconfiguration_tmp.deserialize(i) @BatchTasks << probetaskbasicconfiguration_tmp end end @TaskType = params['TaskType'] @Nodes = params['Nodes'] @Interval = params['Interval'] @Parameters = params['Parameters'] @TaskCategory = params['TaskCategory'] @Cron = params['Cron'] unless params['Tag'].nil? @Tag = [] params['Tag'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tag << tag_tmp end end @ProbeType = params['ProbeType'] @PluginSource = params['PluginSource'] @ClientNum = params['ClientNum'] end end # CreateProbeTasks返回参数结构体 class CreateProbeTasksResponse < TencentCloud::Common::AbstractModel # @param TaskIDs: 任务ID列表 # @type TaskIDs: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskIDs, :RequestId def initialize(taskids=nil, requestid=nil) @TaskIDs = taskids @RequestId = requestid end def deserialize(params) @TaskIDs = params['TaskIDs'] @RequestId = params['RequestId'] end end # CreateTaskEx请求参数结构体 class CreateTaskExRequest < TencentCloud::Common::AbstractModel # @param CatTypeName: http, https, ping, tcp, ftp, smtp, udp, dns 之一 # @type CatTypeName: String # @param Url: 拨测的URL, 例如:www.qq.com (URL域名解析需要能解析出具体的IP) # @type Url: String # @param Period: 拨测周期。取值可为1,5,15,30之一, 单位:分钟。精度不能低于用户等级规定的最小精度 # @type Period: Integer # @param TaskName: 拨测任务名称不能超过32个字符。同一个用户创建的任务名不可重复 # @type TaskName: String # @param AgentGroupId: 拨测分组ID,体现本拨测任务要采用哪些运营商作为拨测源。一般可直接填写本用户的默认拨测分组。参见:DescribeAgentGroups 接口,本参数使用返回结果里的GroupId的值。注意: Type为0时,AgentGroupId为必填 # @type AgentGroupId: Integer # @param Host: 指定域名(如需要) # @type Host: String # @param IsHeader: 是否为Header请求(非0 发起Header 请求。为0,且PostData 非空,发起POST请求。为0,PostData 为空,发起GET请求) # @type IsHeader: Integer # @param SslVer: URL中含有"https"时有用。缺省为SSLv23。需要为 TLSv1_2, TLSv1_1, TLSv1, SSLv2, SSLv23, SSLv3 之一 # @type SslVer: String # @param PostData: POST请求数据。空字符串表示非POST请求 # @type PostData: String # @param UserAgent: 用户Agent信息 # @type UserAgent: String # @param CheckStr: 要在结果中进行匹配的字符串 # @type CheckStr: String # @param CheckType: 1 表示通过检查结果是否包含CheckStr 进行校验 # @type CheckType: Integer # @param Cookie: 需要设置的Cookie信息 # @type Cookie: String # @param TaskId: 任务ID,用于验证且修改任务时传入原任务ID # @type TaskId: Integer # @param UserName: 登录服务器的账号。如果为空字符串,表示不用校验用户密码。只做简单连接服务器的拨测 # @type UserName: String # @param PassWord: 登录服务器的密码 # @type PassWord: String # @param ReqDataType: 缺省为0。0 表示请求为字符串类型。1表示为二进制类型 # @type ReqDataType: Integer # @param ReqData: 发起TCP, UDP请求的协议请求数据 # @type ReqData: String # @param RespDataType: 缺省为0。0 表示响应为字符串类型。1表示为二进制类型 # @type RespDataType: Integer # @param RespData: 预期的UDP请求的回应数据。字符串型,只需要返回的结果里包含本字符串算校验通过。二进制型,则需要严格等于才算通过 # @type RespData: String # @param DnsSvr: 目的DNS服务器 可以为空字符串 # @type DnsSvr: String # @param DnsCheckIp: 需要检验是否在DNS IP列表的IP。可以为空字符串,表示不校验 # @type DnsCheckIp: String # @param DnsQueryType: 需要为下列值之一。缺省为A。A, MX, NS, CNAME, TXT, ANY # @type DnsQueryType: String # @param UseSecConn: 是否使用安全链接SSL, 0 不使用,1 使用 # @type UseSecConn: Integer # @param NeedAuth: FTP登录验证方式, 0 不验证 , 1 匿名登录, 2 需要身份验证 # @type NeedAuth: Integer # @param Port: 拨测目标的端口号 # @type Port: Integer # @param Type: Type=0 默认 (站点监控)Type=2 可用率监控 # @type Type: Integer # @param IsVerify: IsVerify=0 非验证任务 IsVerify=1 验证任务,不传则默认为0 # @type IsVerify: Integer # @param RedirectFollowNum: 跟随跳转次数,取值范围0-5,不传则表示不跟随 # @type RedirectFollowNum: Integer attr_accessor :CatTypeName, :Url, :Period, :TaskName, :AgentGroupId, :Host, :IsHeader, :SslVer, :PostData, :UserAgent, :CheckStr, :CheckType, :Cookie, :TaskId, :UserName, :PassWord, :ReqDataType, :ReqData, :RespDataType, :RespData, :DnsSvr, :DnsCheckIp, :DnsQueryType, :UseSecConn, :NeedAuth, :Port, :Type, :IsVerify, :RedirectFollowNum def initialize(cattypename=nil, url=nil, period=nil, taskname=nil, agentgroupid=nil, host=nil, isheader=nil, sslver=nil, postdata=nil, useragent=nil, checkstr=nil, checktype=nil, cookie=nil, taskid=nil, username=nil, password=nil, reqdatatype=nil, reqdata=nil, respdatatype=nil, respdata=nil, dnssvr=nil, dnscheckip=nil, dnsquerytype=nil, usesecconn=nil, needauth=nil, port=nil, type=nil, isverify=nil, redirectfollownum=nil) @CatTypeName = cattypename @Url = url @Period = period @TaskName = taskname @AgentGroupId = agentgroupid @Host = host @IsHeader = isheader @SslVer = sslver @PostData = postdata @UserAgent = useragent @CheckStr = checkstr @CheckType = checktype @Cookie = cookie @TaskId = taskid @UserName = username @PassWord = password @ReqDataType = reqdatatype @ReqData = reqdata @RespDataType = respdatatype @RespData = respdata @DnsSvr = dnssvr @DnsCheckIp = dnscheckip @DnsQueryType = dnsquerytype @UseSecConn = usesecconn @NeedAuth = needauth @Port = port @Type = type @IsVerify = isverify @RedirectFollowNum = redirectfollownum end def deserialize(params) @CatTypeName = params['CatTypeName'] @Url = params['Url'] @Period = params['Period'] @TaskName = params['TaskName'] @AgentGroupId = params['AgentGroupId'] @Host = params['Host'] @IsHeader = params['IsHeader'] @SslVer = params['SslVer'] @PostData = params['PostData'] @UserAgent = params['UserAgent'] @CheckStr = params['CheckStr'] @CheckType = params['CheckType'] @Cookie = params['Cookie'] @TaskId = params['TaskId'] @UserName = params['UserName'] @PassWord = params['PassWord'] @ReqDataType = params['ReqDataType'] @ReqData = params['ReqData'] @RespDataType = params['RespDataType'] @RespData = params['RespData'] @DnsSvr = params['DnsSvr'] @DnsCheckIp = params['DnsCheckIp'] @DnsQueryType = params['DnsQueryType'] @UseSecConn = params['UseSecConn'] @NeedAuth = params['NeedAuth'] @Port = params['Port'] @Type = params['Type'] @IsVerify = params['IsVerify'] @RedirectFollowNum = params['RedirectFollowNum'] end end # CreateTaskEx返回参数结构体 class CreateTaskExResponse < TencentCloud::Common::AbstractModel # @param ResultId: 拨测结果查询ID。接下来可以使用查询拨测是否能够成功,验证能否通过。 # @type ResultId: Integer # @param TaskId: 拨测任务ID。验证通过后,创建任务时使用,传递给CreateTask 接口。 # @type TaskId: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ResultId, :TaskId, :RequestId def initialize(resultid=nil, taskid=nil, requestid=nil) @ResultId = resultid @TaskId = taskid @RequestId = requestid end def deserialize(params) @ResultId = params['ResultId'] @TaskId = params['TaskId'] @RequestId = params['RequestId'] end end # 时延等数据,数据点 class DataPoint < TencentCloud::Common::AbstractModel # @param LogTime: 数据点的时间 # @type LogTime: String # @param MetricValue: 数据值 # @type MetricValue: Float attr_accessor :LogTime, :MetricValue def initialize(logtime=nil, metricvalue=nil) @LogTime = logtime @MetricValue = metricvalue end def deserialize(params) @LogTime = params['LogTime'] @MetricValue = params['MetricValue'] end end # 包含MetricName的DataPoint数据 class DataPointMetric < TencentCloud::Common::AbstractModel # @param MetricName: 数据项 # @type MetricName: String # @param Points: 数据点的时间和值 # @type Points: Array attr_accessor :MetricName, :Points def initialize(metricname=nil, points=nil) @MetricName = metricname @Points = points end def deserialize(params) @MetricName = params['MetricName'] unless params['Points'].nil? @Points = [] params['Points'].each do |i| datapoint_tmp = DataPoint.new datapoint_tmp.deserialize(i) @Points << datapoint_tmp end end end end # DeleteAgentGroup请求参数结构体 class DeleteAgentGroupRequest < TencentCloud::Common::AbstractModel # @param GroupId: 拨测分组id # @type GroupId: Integer attr_accessor :GroupId def initialize(groupid=nil) @GroupId = groupid end def deserialize(params) @GroupId = params['GroupId'] end end # DeleteAgentGroup返回参数结构体 class DeleteAgentGroupResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteProbeTask请求参数结构体 class DeleteProbeTaskRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 任务 ID # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # DeleteProbeTask返回参数结构体 class DeleteProbeTaskResponse < TencentCloud::Common::AbstractModel # @param Total: 任务总量 # @type Total: Integer # @param SuccessCount: 任务成功量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SuccessCount: Integer # @param Results: 任务执行结果 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :SuccessCount, :Results, :RequestId def initialize(total=nil, successcount=nil, results=nil, requestid=nil) @Total = total @SuccessCount = successcount @Results = results @RequestId = requestid end def deserialize(params) @Total = params['Total'] @SuccessCount = params['SuccessCount'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| taskresult_tmp = TaskResult.new taskresult_tmp.deserialize(i) @Results << taskresult_tmp end end @RequestId = params['RequestId'] end end # DeleteTasks请求参数结构体 class DeleteTasksRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 拨测任务id # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # DeleteTasks返回参数结构体 class DeleteTasksResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DescribeAgentGroups请求参数结构体 class DescribeAgentGroupsRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeAgentGroups返回参数结构体 class DescribeAgentGroupsResponse < TencentCloud::Common::AbstractModel # @param SysDefaultGroup: 用户所属的系统默认拨测分组 # @type SysDefaultGroup: :class:`Tencentcloud::Cat.v20180409.models.AgentGroup` # @param CustomGroups: 用户创建的拨测分组列表 # @type CustomGroups: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :SysDefaultGroup, :CustomGroups, :RequestId def initialize(sysdefaultgroup=nil, customgroups=nil, requestid=nil) @SysDefaultGroup = sysdefaultgroup @CustomGroups = customgroups @RequestId = requestid end def deserialize(params) unless params['SysDefaultGroup'].nil? @SysDefaultGroup = AgentGroup.new @SysDefaultGroup.deserialize(params['SysDefaultGroup']) end unless params['CustomGroups'].nil? @CustomGroups = [] params['CustomGroups'].each do |i| agentgroup_tmp = AgentGroup.new agentgroup_tmp.deserialize(i) @CustomGroups << agentgroup_tmp end end @RequestId = params['RequestId'] end end # DescribeAgents请求参数结构体 class DescribeAgentsRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeAgents返回参数结构体 class DescribeAgentsResponse < TencentCloud::Common::AbstractModel # @param Agents: 本用户可选的拨测点列表 # @type Agents: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Agents, :RequestId def initialize(agents=nil, requestid=nil) @Agents = agents @RequestId = requestid end def deserialize(params) unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| catagent_tmp = CatAgent.new catagent_tmp.deserialize(i) @Agents << catagent_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmTopic请求参数结构体 class DescribeAlarmTopicRequest < TencentCloud::Common::AbstractModel # @param NeedAdd: 如果不存在拨测相关的主题,是否自动创建一个。取值可为0, 1,默认为0 # @type NeedAdd: Integer attr_accessor :NeedAdd def initialize(needadd=nil) @NeedAdd = needadd end def deserialize(params) @NeedAdd = params['NeedAdd'] end end # DescribeAlarmTopic返回参数结构体 class DescribeAlarmTopicResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 主题个数 # @type TotalCount: Integer # @param Topics: 主题列表 # @type Topics: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Topics, :RequestId def initialize(totalcount=nil, topics=nil, requestid=nil) @TotalCount = totalcount @Topics = topics @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Topics'].nil? @Topics = [] params['Topics'].each do |i| alarmtopic_tmp = AlarmTopic.new alarmtopic_tmp.deserialize(i) @Topics << alarmtopic_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmsByTask请求参数结构体 class DescribeAlarmsByTaskRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer # @param Offset: 从第Offset 条开始查询。缺省值为0 # @type Offset: Integer # @param Limit: 本批次查询Limit 条记录。缺省值为20 # @type Limit: Integer # @param Status: 0 全部, 1 已恢复, 2 未恢复 默认为0。其他值,视为0 查全部状态 # @type Status: Integer # @param BeginTime: 格式如:2017-05-09 00:00:00 缺省为7天前0点 # @type BeginTime: String # @param EndTime: 格式如:2017-05-10 00:00:00 缺省为明天0点 # @type EndTime: String # @param SortBy: 排序字段,可为Time, ObjName, Duration, Status, Content 之一。缺省为Time # @type SortBy: String # @param SortType: 升序或降序。可为Desc, Asc之一。缺省为Desc # @type SortType: String # @param ObjName: 告警对象的名称 # @type ObjName: String attr_accessor :TaskId, :Offset, :Limit, :Status, :BeginTime, :EndTime, :SortBy, :SortType, :ObjName def initialize(taskid=nil, offset=nil, limit=nil, status=nil, begintime=nil, endtime=nil, sortby=nil, sorttype=nil, objname=nil) @TaskId = taskid @Offset = offset @Limit = limit @Status = status @BeginTime = begintime @EndTime = endtime @SortBy = sortby @SortType = sorttype @ObjName = objname end def deserialize(params) @TaskId = params['TaskId'] @Offset = params['Offset'] @Limit = params['Limit'] @Status = params['Status'] @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @SortBy = params['SortBy'] @SortType = params['SortType'] @ObjName = params['ObjName'] end end # DescribeAlarmsByTask返回参数结构体 class DescribeAlarmsByTaskResponse < TencentCloud::Common::AbstractModel # @param AlarmInfos: 告警信息列表 # @type AlarmInfos: Array # @param FaultRatio: 故障率 # @type FaultRatio: Float # @param FaultTimeSpec: 故障总时长 # @type FaultTimeSpec: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AlarmInfos, :FaultRatio, :FaultTimeSpec, :RequestId def initialize(alarminfos=nil, faultratio=nil, faulttimespec=nil, requestid=nil) @AlarmInfos = alarminfos @FaultRatio = faultratio @FaultTimeSpec = faulttimespec @RequestId = requestid end def deserialize(params) unless params['AlarmInfos'].nil? @AlarmInfos = [] params['AlarmInfos'].each do |i| alarminfo_tmp = AlarmInfo.new alarminfo_tmp.deserialize(i) @AlarmInfos << alarminfo_tmp end end @FaultRatio = params['FaultRatio'] @FaultTimeSpec = params['FaultTimeSpec'] @RequestId = params['RequestId'] end end # DescribeAlarms请求参数结构体 class DescribeAlarmsRequest < TencentCloud::Common::AbstractModel # @param Offset: 从第Offset 条开始查询。缺省值为0 # @type Offset: Integer # @param Limit: 本批次查询Limit 条记录。缺省值为20 # @type Limit: Integer # @param Status: 0 全部, 1 已恢复, 2 未恢复 默认为0。其他值,视为0 查全部状态。 # @type Status: Integer # @param BeginTime: 格式如:2017-05-09 00:00:00 缺省为7天前0点 # @type BeginTime: String # @param EndTime: 格式如:2017-05-10 00:00:00 缺省为明天0点 # @type EndTime: String # @param ObjName: 告警任务名 # @type ObjName: String # @param SortBy: 排序字段,可为Time, ObjName, Duration, Status, Content 之一。缺省为Time。 # @type SortBy: String # @param SortType: 升序或降序。可为Desc, Asc之一。缺省为Desc。 # @type SortType: String attr_accessor :Offset, :Limit, :Status, :BeginTime, :EndTime, :ObjName, :SortBy, :SortType def initialize(offset=nil, limit=nil, status=nil, begintime=nil, endtime=nil, objname=nil, sortby=nil, sorttype=nil) @Offset = offset @Limit = limit @Status = status @BeginTime = begintime @EndTime = endtime @ObjName = objname @SortBy = sortby @SortType = sorttype end def deserialize(params) @Offset = params['Offset'] @Limit = params['Limit'] @Status = params['Status'] @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @ObjName = params['ObjName'] @SortBy = params['SortBy'] @SortType = params['SortType'] end end # DescribeAlarms返回参数结构体 class DescribeAlarmsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 告警总条数 # @type TotalCount: Integer # @param AlarmInfos: 本批告警信息列表 # @type AlarmInfos: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :AlarmInfos, :RequestId def initialize(totalcount=nil, alarminfos=nil, requestid=nil) @TotalCount = totalcount @AlarmInfos = alarminfos @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['AlarmInfos'].nil? @AlarmInfos = [] params['AlarmInfos'].each do |i| alarminfo_tmp = AlarmInfo.new alarminfo_tmp.deserialize(i) @AlarmInfos << alarminfo_tmp end end @RequestId = params['RequestId'] end end # DescribeCatLogs请求参数结构体 class DescribeCatLogsRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer # @param Offset: 从第Offset 条开始查询。缺省值为0 # @type Offset: Integer # @param Limit: 本批次查询Limit 条记录。缺省值为20 # @type Limit: Integer # @param BeginTime: 格式如:2017-05-09 00:00:00 缺省为当天0点,最多拉取1天的数据 # @type BeginTime: String # @param EndTime: 格式如:2017-05-10 00:00:00 缺省为当前时间 # @type EndTime: String # @param SortType: 按时间升序或降序。默认降序。可选值: Desc, Asc # @type SortType: String attr_accessor :TaskId, :Offset, :Limit, :BeginTime, :EndTime, :SortType def initialize(taskid=nil, offset=nil, limit=nil, begintime=nil, endtime=nil, sorttype=nil) @TaskId = taskid @Offset = offset @Limit = limit @BeginTime = begintime @EndTime = endtime @SortType = sorttype end def deserialize(params) @TaskId = params['TaskId'] @Offset = params['Offset'] @Limit = params['Limit'] @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @SortType = params['SortType'] end end # DescribeCatLogs返回参数结构体 class DescribeCatLogsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的总记录数 # @type TotalCount: Integer # @param CatLogs: 拨测记录列表 # @type CatLogs: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :CatLogs, :RequestId def initialize(totalcount=nil, catlogs=nil, requestid=nil) @TotalCount = totalcount @CatLogs = catlogs @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['CatLogs'].nil? @CatLogs = [] params['CatLogs'].each do |i| catlog_tmp = CatLog.new catlog_tmp.deserialize(i) @CatLogs << catlog_tmp end end @RequestId = params['RequestId'] end end # DescribeDetailedSingleProbeData请求参数结构体 class DescribeDetailedSingleProbeDataRequest < TencentCloud::Common::AbstractModel # @param BeginTime: 开始时间戳(毫秒级) # @type BeginTime: Integer # @param EndTime: 结束时间戳(毫秒级) # @type EndTime: Integer # @param TaskType: 任务类型 # @type TaskType: String # @param SortField: 待排序字段 # @type SortField: String # @param Ascending: true表示升序 # @type Ascending: Boolean # @param SelectedFields: 选中字段 # @type SelectedFields: Array # @param Offset: 起始取数位置 # @type Offset: Integer # @param Limit: 取数数量 # @type Limit: Integer # @param TaskID: 任务ID # @type TaskID: Array # @param Operators: 拨测点运营商 # @type Operators: Array # @param Districts: 拨测点地区 # @type Districts: Array # @param ErrorTypes: 错误类型 # @type ErrorTypes: Array # @param City: 城市 # @type City: Array attr_accessor :BeginTime, :EndTime, :TaskType, :SortField, :Ascending, :SelectedFields, :Offset, :Limit, :TaskID, :Operators, :Districts, :ErrorTypes, :City def initialize(begintime=nil, endtime=nil, tasktype=nil, sortfield=nil, ascending=nil, selectedfields=nil, offset=nil, limit=nil, taskid=nil, operators=nil, districts=nil, errortypes=nil, city=nil) @BeginTime = begintime @EndTime = endtime @TaskType = tasktype @SortField = sortfield @Ascending = ascending @SelectedFields = selectedfields @Offset = offset @Limit = limit @TaskID = taskid @Operators = operators @Districts = districts @ErrorTypes = errortypes @City = city end def deserialize(params) @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @TaskType = params['TaskType'] @SortField = params['SortField'] @Ascending = params['Ascending'] @SelectedFields = params['SelectedFields'] @Offset = params['Offset'] @Limit = params['Limit'] @TaskID = params['TaskID'] @Operators = params['Operators'] @Districts = params['Districts'] @ErrorTypes = params['ErrorTypes'] @City = params['City'] end end # DescribeDetailedSingleProbeData返回参数结构体 class DescribeDetailedSingleProbeDataResponse < TencentCloud::Common::AbstractModel # @param DataSet: 单次详情数据 # @type DataSet: Array # @param TotalNumber: 符合条件的数据总数 # @type TotalNumber: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DataSet, :TotalNumber, :RequestId def initialize(dataset=nil, totalnumber=nil, requestid=nil) @DataSet = dataset @TotalNumber = totalnumber @RequestId = requestid end def deserialize(params) unless params['DataSet'].nil? @DataSet = [] params['DataSet'].each do |i| detailedsingledatadefine_tmp = DetailedSingleDataDefine.new detailedsingledatadefine_tmp.deserialize(i) @DataSet << detailedsingledatadefine_tmp end end @TotalNumber = params['TotalNumber'] @RequestId = params['RequestId'] end end # DescribeProbeMetricData请求参数结构体 class DescribeProbeMetricDataRequest < TencentCloud::Common::AbstractModel # @param AnalyzeTaskType: 分析任务类型 # @type AnalyzeTaskType: String # @param MetricType: 指标类型,counter 或者 gauge # @type MetricType: String # @param Field: 指标详细字段 # @type Field: String # @param Filter: 过滤条件 # @type Filter: String # @param GroupBy: 聚合时间, 1m、1d、100d 等等 # @type GroupBy: String # @param Filters: 过滤条件数组 # @type Filters: Array attr_accessor :AnalyzeTaskType, :MetricType, :Field, :Filter, :GroupBy, :Filters def initialize(analyzetasktype=nil, metrictype=nil, field=nil, filter=nil, groupby=nil, filters=nil) @AnalyzeTaskType = analyzetasktype @MetricType = metrictype @Field = field @Filter = filter @GroupBy = groupby @Filters = filters end def deserialize(params) @AnalyzeTaskType = params['AnalyzeTaskType'] @MetricType = params['MetricType'] @Field = params['Field'] @Filter = params['Filter'] @GroupBy = params['GroupBy'] @Filters = params['Filters'] end end # DescribeProbeMetricData返回参数结构体 class DescribeProbeMetricDataResponse < TencentCloud::Common::AbstractModel # @param MetricSet: 指标 JSON 序列化后的字符串 # @type MetricSet: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :MetricSet, :RequestId def initialize(metricset=nil, requestid=nil) @MetricSet = metricset @RequestId = requestid end def deserialize(params) @MetricSet = params['MetricSet'] @RequestId = params['RequestId'] end end # DescribeProbeNodes请求参数结构体 class DescribeProbeNodesRequest < TencentCloud::Common::AbstractModel # @param NodeType: 节点类型 #
  • 1 = IDC
  • #
  • 2 = LastMile
  • #
  • 3 = Mobile
  • # @type NodeType: Integer # @param Location: 节点区域 #
  • 1 = 中国大陆
  • #
  • 2 = 港澳台
  • #
  • 3 = 海外
  • # @type Location: Integer # @param IsIPv6: 是否IPv6 # @type IsIPv6: Boolean # @param NodeName: 名字模糊搜索 # @type NodeName: String # @param PayMode: 付费模式 #
  • 1 = 试用版本
  • #
  • 2 = 付费版本
  • # @type PayMode: Integer attr_accessor :NodeType, :Location, :IsIPv6, :NodeName, :PayMode def initialize(nodetype=nil, location=nil, isipv6=nil, nodename=nil, paymode=nil) @NodeType = nodetype @Location = location @IsIPv6 = isipv6 @NodeName = nodename @PayMode = paymode end def deserialize(params) @NodeType = params['NodeType'] @Location = params['Location'] @IsIPv6 = params['IsIPv6'] @NodeName = params['NodeName'] @PayMode = params['PayMode'] end end # DescribeProbeNodes返回参数结构体 class DescribeProbeNodesResponse < TencentCloud::Common::AbstractModel # @param NodeSet: 节点列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NodeSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :NodeSet, :RequestId def initialize(nodeset=nil, requestid=nil) @NodeSet = nodeset @RequestId = requestid end def deserialize(params) unless params['NodeSet'].nil? @NodeSet = [] params['NodeSet'].each do |i| nodedefine_tmp = NodeDefine.new nodedefine_tmp.deserialize(i) @NodeSet << nodedefine_tmp end end @RequestId = params['RequestId'] end end # DescribeProbeTasks请求参数结构体 class DescribeProbeTasksRequest < TencentCloud::Common::AbstractModel # @param TaskIDs: 任务 ID 列表 # @type TaskIDs: Array # @param TaskName: 任务名 # @type TaskName: String # @param TargetAddress: 拨测目标 # @type TargetAddress: String # @param TaskStatus: 任务状态列表 # @type TaskStatus: Array # @param Offset: 偏移量,默认为0 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100 # @type Limit: Integer # @param PayMode: 付费模式 #
  • 1 = 试用版本
  • #
  • 2 = 付费版本
  • # @type PayMode: Integer # @param OrderState: 订单状态 #
  • 1 = 正常
  • #
  • 2 = 欠费
  • # @type OrderState: Integer # @param TaskType: 拨测类型 # @type TaskType: Array # @param TaskCategory: 节点类型 # @type TaskCategory: Array # @param OrderBy: 排序的列 # @type OrderBy: String # @param Ascend: 是否正序 # @type Ascend: Boolean # @param TagFilters: 资源标签值 # @type TagFilters: Array attr_accessor :TaskIDs, :TaskName, :TargetAddress, :TaskStatus, :Offset, :Limit, :PayMode, :OrderState, :TaskType, :TaskCategory, :OrderBy, :Ascend, :TagFilters def initialize(taskids=nil, taskname=nil, targetaddress=nil, taskstatus=nil, offset=nil, limit=nil, paymode=nil, orderstate=nil, tasktype=nil, taskcategory=nil, orderby=nil, ascend=nil, tagfilters=nil) @TaskIDs = taskids @TaskName = taskname @TargetAddress = targetaddress @TaskStatus = taskstatus @Offset = offset @Limit = limit @PayMode = paymode @OrderState = orderstate @TaskType = tasktype @TaskCategory = taskcategory @OrderBy = orderby @Ascend = ascend @TagFilters = tagfilters end def deserialize(params) @TaskIDs = params['TaskIDs'] @TaskName = params['TaskName'] @TargetAddress = params['TargetAddress'] @TaskStatus = params['TaskStatus'] @Offset = params['Offset'] @Limit = params['Limit'] @PayMode = params['PayMode'] @OrderState = params['OrderState'] @TaskType = params['TaskType'] @TaskCategory = params['TaskCategory'] @OrderBy = params['OrderBy'] @Ascend = params['Ascend'] unless params['TagFilters'].nil? @TagFilters = [] params['TagFilters'].each do |i| keyvaluepair_tmp = KeyValuePair.new keyvaluepair_tmp.deserialize(i) @TagFilters << keyvaluepair_tmp end end end end # DescribeProbeTasks返回参数结构体 class DescribeProbeTasksResponse < TencentCloud::Common::AbstractModel # @param TaskSet: 任务列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskSet: Array # @param Total: 任务总数 # @type Total: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskSet, :Total, :RequestId def initialize(taskset=nil, total=nil, requestid=nil) @TaskSet = taskset @Total = total @RequestId = requestid end def deserialize(params) unless params['TaskSet'].nil? @TaskSet = [] params['TaskSet'].each do |i| probetask_tmp = ProbeTask.new probetask_tmp.deserialize(i) @TaskSet << probetask_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeTaskDetail请求参数结构体 class DescribeTaskDetailRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 拨测任务id 数组 # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # DescribeTaskDetail返回参数结构体 class DescribeTaskDetailResponse < TencentCloud::Common::AbstractModel # @param Tasks: 拨测任务列表 # @type Tasks: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Tasks, :RequestId def initialize(tasks=nil, requestid=nil) @Tasks = tasks @RequestId = requestid end def deserialize(params) unless params['Tasks'].nil? @Tasks = [] params['Tasks'].each do |i| cattaskdetail_tmp = CatTaskDetail.new cattaskdetail_tmp.deserialize(i) @Tasks << cattaskdetail_tmp end end @RequestId = params['RequestId'] end end # DescribeTasksByType请求参数结构体 class DescribeTasksByTypeRequest < TencentCloud::Common::AbstractModel # @param Offset: 从第Offset 条开始查询。缺省值为0 # @type Offset: Integer # @param Limit: 本批次查询Limit 条记录。缺省值为20 # @type Limit: Integer # @param Type: 拨测任务类型。0 站点监控,2 可用性监控。缺省值为2 # @type Type: Integer attr_accessor :Offset, :Limit, :Type def initialize(offset=nil, limit=nil, type=nil) @Offset = offset @Limit = limit @Type = type end def deserialize(params) @Offset = params['Offset'] @Limit = params['Limit'] @Type = params['Type'] end end # DescribeTasksByType返回参数结构体 class DescribeTasksByTypeResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的总任务数 # @type TotalCount: Integer # @param Tasks: 任务列表 # @type Tasks: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Tasks, :RequestId def initialize(totalcount=nil, tasks=nil, requestid=nil) @TotalCount = totalcount @Tasks = tasks @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Tasks'].nil? @Tasks = [] params['Tasks'].each do |i| taskalarm_tmp = TaskAlarm.new taskalarm_tmp.deserialize(i) @Tasks << taskalarm_tmp end end @RequestId = params['RequestId'] end end # DescribeUserLimit请求参数结构体 class DescribeUserLimitRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeUserLimit返回参数结构体 class DescribeUserLimitResponse < TencentCloud::Common::AbstractModel # @param MaxTaskNum: 用户可建立的最大任务数 # @type MaxTaskNum: Integer # @param MaxAgentNum: 用户可用的最大拨测结点数 # @type MaxAgentNum: Integer # @param MaxGroupNum: 用户可建立的最大拨测分组数 # @type MaxGroupNum: Integer # @param MinPeriod: 用户可用的最小拨测间隔 # @type MinPeriod: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :MaxTaskNum, :MaxAgentNum, :MaxGroupNum, :MinPeriod, :RequestId def initialize(maxtasknum=nil, maxagentnum=nil, maxgroupnum=nil, minperiod=nil, requestid=nil) @MaxTaskNum = maxtasknum @MaxAgentNum = maxagentnum @MaxGroupNum = maxgroupnum @MinPeriod = minperiod @RequestId = requestid end def deserialize(params) @MaxTaskNum = params['MaxTaskNum'] @MaxAgentNum = params['MaxAgentNum'] @MaxGroupNum = params['MaxGroupNum'] @MinPeriod = params['MinPeriod'] @RequestId = params['RequestId'] end end # 单条详细拨测数据 class DetailedSingleDataDefine < TencentCloud::Common::AbstractModel # @param ProbeTime: 拨测时间戳 # @type ProbeTime: Integer # @param Labels: 储存所有string类型字段 # @type Labels: Array # @param Fields: 储存所有float类型字段 # @type Fields: Array attr_accessor :ProbeTime, :Labels, :Fields def initialize(probetime=nil, labels=nil, fields=nil) @ProbeTime = probetime @Labels = labels @Fields = fields end def deserialize(params) @ProbeTime = params['ProbeTime'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @Labels << label_tmp end end unless params['Fields'].nil? @Fields = [] params['Fields'].each do |i| field_tmp = Field.new field_tmp.deserialize(i) @Fields << field_tmp end end end end # 拨测点维度信息 class DimensionsDetail < TencentCloud::Common::AbstractModel # @param Isp: 运营商列表 # @type Isp: Array # @param Province: 省份列表 # @type Province: Array attr_accessor :Isp, :Province def initialize(isp=nil, province=nil) @Isp = isp @Province = province end def deserialize(params) @Isp = params['Isp'] @Province = params['Province'] end end # 储存float类型字段 class Field < TencentCloud::Common::AbstractModel # @param ID: 自定义字段编号 # @type ID: Integer # @param Name: 自定义字段名称/说明 # @type Name: String # @param Value: 字段值 # @type Value: Float attr_accessor :ID, :Name, :Value def initialize(id=nil, name=nil, value=nil) @ID = id @Name = name @Value = value end def deserialize(params) @ID = params['ID'] @Name = params['Name'] @Value = params['Value'] end end # GetAvailRatioHistory请求参数结构体 class GetAvailRatioHistoryRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer # @param TimeStamp: 具体时间点 # @type TimeStamp: String attr_accessor :TaskId, :TimeStamp def initialize(taskid=nil, timestamp=nil) @TaskId = taskid @TimeStamp = timestamp end def deserialize(params) @TaskId = params['TaskId'] @TimeStamp = params['TimeStamp'] end end # GetAvailRatioHistory返回参数结构体 class GetAvailRatioHistoryResponse < TencentCloud::Common::AbstractModel # @param AvgAvailRatio: 整体平均可用率 # @type AvgAvailRatio: Float # @param LowestAvailRatio: 各省份最低可用率 # @type LowestAvailRatio: Float # @param LowestProvince: 可用率最低的省份 # @type LowestProvince: String # @param LowestIsp: 可用率最低的运营商 # @type LowestIsp: String # @param ProvinceData: 分省份的可用率数据 # @type ProvinceData: Array # @param AvgTime: 国内平均耗时,单位毫秒 # @type AvgTime: Float # @param AvgAvailRatio2: 国外平均可用率 # @type AvgAvailRatio2: Float # @param AvgTime2: 国外平均耗时,单位毫秒 # @type AvgTime2: Float # @param LowestAvailRatio2: 国外最低可用率 # @type LowestAvailRatio2: Float # @param LowestProvince2: 国外可用率最低的区域 # @type LowestProvince2: String # @param LowestIsp2: 国外可用率最低的运营商 # @type LowestIsp2: String # @param ProvinceData2: 国外分区域的可用率数据 # @type ProvinceData2: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AvgAvailRatio, :LowestAvailRatio, :LowestProvince, :LowestIsp, :ProvinceData, :AvgTime, :AvgAvailRatio2, :AvgTime2, :LowestAvailRatio2, :LowestProvince2, :LowestIsp2, :ProvinceData2, :RequestId def initialize(avgavailratio=nil, lowestavailratio=nil, lowestprovince=nil, lowestisp=nil, provincedata=nil, avgtime=nil, avgavailratio2=nil, avgtime2=nil, lowestavailratio2=nil, lowestprovince2=nil, lowestisp2=nil, provincedata2=nil, requestid=nil) @AvgAvailRatio = avgavailratio @LowestAvailRatio = lowestavailratio @LowestProvince = lowestprovince @LowestIsp = lowestisp @ProvinceData = provincedata @AvgTime = avgtime @AvgAvailRatio2 = avgavailratio2 @AvgTime2 = avgtime2 @LowestAvailRatio2 = lowestavailratio2 @LowestProvince2 = lowestprovince2 @LowestIsp2 = lowestisp2 @ProvinceData2 = provincedata2 @RequestId = requestid end def deserialize(params) @AvgAvailRatio = params['AvgAvailRatio'] @LowestAvailRatio = params['LowestAvailRatio'] @LowestProvince = params['LowestProvince'] @LowestIsp = params['LowestIsp'] unless params['ProvinceData'].nil? @ProvinceData = [] params['ProvinceData'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData << provincedetail_tmp end end @AvgTime = params['AvgTime'] @AvgAvailRatio2 = params['AvgAvailRatio2'] @AvgTime2 = params['AvgTime2'] @LowestAvailRatio2 = params['LowestAvailRatio2'] @LowestProvince2 = params['LowestProvince2'] @LowestIsp2 = params['LowestIsp2'] unless params['ProvinceData2'].nil? @ProvinceData2 = [] params['ProvinceData2'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData2 << provincedetail_tmp end end @RequestId = params['RequestId'] end end # GetDailyAvailRatio请求参数结构体 class GetDailyAvailRatioRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer attr_accessor :TaskId def initialize(taskid=nil) @TaskId = taskid end def deserialize(params) @TaskId = params['TaskId'] end end # GetDailyAvailRatio返回参数结构体 class GetDailyAvailRatioResponse < TencentCloud::Common::AbstractModel # @param AvgAvailRatio: 整体平均可用率 # @type AvgAvailRatio: Float # @param LowestAvailRatio: 各省份最低可用率 # @type LowestAvailRatio: Float # @param LowestProvince: 可用率最低的省份 # @type LowestProvince: String # @param ProvinceData: 分省份的可用率数据 # @type ProvinceData: Array # @param AvgTime: 国内平均耗时,单位毫秒 # @type AvgTime: Float # @param AvgAvailRatio2: 国外平均可用率 # @type AvgAvailRatio2: Float # @param AvgTime2: 国外平均耗时,单位毫秒 # @type AvgTime2: Float # @param LowestAvailRatio2: 国外最低可用率 # @type LowestAvailRatio2: Float # @param LowestProvince2: 国外可用率最低的区域 # @type LowestProvince2: String # @param ProvinceData2: 国外分区域的可用率数据 # @type ProvinceData2: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AvgAvailRatio, :LowestAvailRatio, :LowestProvince, :ProvinceData, :AvgTime, :AvgAvailRatio2, :AvgTime2, :LowestAvailRatio2, :LowestProvince2, :ProvinceData2, :RequestId def initialize(avgavailratio=nil, lowestavailratio=nil, lowestprovince=nil, provincedata=nil, avgtime=nil, avgavailratio2=nil, avgtime2=nil, lowestavailratio2=nil, lowestprovince2=nil, provincedata2=nil, requestid=nil) @AvgAvailRatio = avgavailratio @LowestAvailRatio = lowestavailratio @LowestProvince = lowestprovince @ProvinceData = provincedata @AvgTime = avgtime @AvgAvailRatio2 = avgavailratio2 @AvgTime2 = avgtime2 @LowestAvailRatio2 = lowestavailratio2 @LowestProvince2 = lowestprovince2 @ProvinceData2 = provincedata2 @RequestId = requestid end def deserialize(params) @AvgAvailRatio = params['AvgAvailRatio'] @LowestAvailRatio = params['LowestAvailRatio'] @LowestProvince = params['LowestProvince'] unless params['ProvinceData'].nil? @ProvinceData = [] params['ProvinceData'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData << provincedetail_tmp end end @AvgTime = params['AvgTime'] @AvgAvailRatio2 = params['AvgAvailRatio2'] @AvgTime2 = params['AvgTime2'] @LowestAvailRatio2 = params['LowestAvailRatio2'] @LowestProvince2 = params['LowestProvince2'] unless params['ProvinceData2'].nil? @ProvinceData2 = [] params['ProvinceData2'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData2 << provincedetail_tmp end end @RequestId = params['RequestId'] end end # GetRealAvailRatio请求参数结构体 class GetRealAvailRatioRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务Id # @type TaskId: Integer attr_accessor :TaskId def initialize(taskid=nil) @TaskId = taskid end def deserialize(params) @TaskId = params['TaskId'] end end # GetRealAvailRatio返回参数结构体 class GetRealAvailRatioResponse < TencentCloud::Common::AbstractModel # @param AvgAvailRatio: 国内平均可用率 # @type AvgAvailRatio: Float # @param LowestAvailRatio: 各省份最低可用率 # @type LowestAvailRatio: Float # @param LowestProvince: 可用率最低的省份 # @type LowestProvince: String # @param LowestIsp: 可用率最低的运营商 # @type LowestIsp: String # @param ProvinceData: 分省份的可用率数据 # @type ProvinceData: Array # @param AvgTime: 国内平均耗时,单位毫秒 # @type AvgTime: Float # @param AvgAvailRatio2: 国外平均可用率 # @type AvgAvailRatio2: Float # @param AvgTime2: 国外平均耗时,单位毫秒 # @type AvgTime2: Float # @param LowestAvailRatio2: 国外最低可用率 # @type LowestAvailRatio2: Float # @param LowestProvince2: 国外可用率最低的区域 # @type LowestProvince2: String # @param LowestIsp2: 国外可用率最低的运营商 # @type LowestIsp2: String # @param ProvinceData2: 国外分区域的可用率数据 # @type ProvinceData2: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AvgAvailRatio, :LowestAvailRatio, :LowestProvince, :LowestIsp, :ProvinceData, :AvgTime, :AvgAvailRatio2, :AvgTime2, :LowestAvailRatio2, :LowestProvince2, :LowestIsp2, :ProvinceData2, :RequestId def initialize(avgavailratio=nil, lowestavailratio=nil, lowestprovince=nil, lowestisp=nil, provincedata=nil, avgtime=nil, avgavailratio2=nil, avgtime2=nil, lowestavailratio2=nil, lowestprovince2=nil, lowestisp2=nil, provincedata2=nil, requestid=nil) @AvgAvailRatio = avgavailratio @LowestAvailRatio = lowestavailratio @LowestProvince = lowestprovince @LowestIsp = lowestisp @ProvinceData = provincedata @AvgTime = avgtime @AvgAvailRatio2 = avgavailratio2 @AvgTime2 = avgtime2 @LowestAvailRatio2 = lowestavailratio2 @LowestProvince2 = lowestprovince2 @LowestIsp2 = lowestisp2 @ProvinceData2 = provincedata2 @RequestId = requestid end def deserialize(params) @AvgAvailRatio = params['AvgAvailRatio'] @LowestAvailRatio = params['LowestAvailRatio'] @LowestProvince = params['LowestProvince'] @LowestIsp = params['LowestIsp'] unless params['ProvinceData'].nil? @ProvinceData = [] params['ProvinceData'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData << provincedetail_tmp end end @AvgTime = params['AvgTime'] @AvgAvailRatio2 = params['AvgAvailRatio2'] @AvgTime2 = params['AvgTime2'] @LowestAvailRatio2 = params['LowestAvailRatio2'] @LowestProvince2 = params['LowestProvince2'] @LowestIsp2 = params['LowestIsp2'] unless params['ProvinceData2'].nil? @ProvinceData2 = [] params['ProvinceData2'].each do |i| provincedetail_tmp = ProvinceDetail.new provincedetail_tmp.deserialize(i) @ProvinceData2 << provincedetail_tmp end end @RequestId = params['RequestId'] end end # GetRespTimeTrendEx请求参数结构体 class GetRespTimeTrendExRequest < TencentCloud::Common::AbstractModel # @param TaskId: 验证成功的拨测任务id # @type TaskId: Integer # @param Date: 统计数据的发生日期。格式如:2017-05-09 # @type Date: String # @param Period: 数据的采集周期,单位分钟。取值可为 1, 5, 15, 30 # @type Period: Integer # @param Dimensions: 可为 Isp, Province # @type Dimensions: :class:`Tencentcloud::Cat.v20180409.models.DimensionsDetail` # @param MetricName: 可为 totalTime, parseTime, connectTime, sendTime, waitTime, receiveTime, availRatio。缺省值为 totalTime # @type MetricName: String attr_accessor :TaskId, :Date, :Period, :Dimensions, :MetricName def initialize(taskid=nil, date=nil, period=nil, dimensions=nil, metricname=nil) @TaskId = taskid @Date = date @Period = period @Dimensions = dimensions @MetricName = metricname end def deserialize(params) @TaskId = params['TaskId'] @Date = params['Date'] @Period = params['Period'] unless params['Dimensions'].nil? @Dimensions = DimensionsDetail.new @Dimensions.deserialize(params['Dimensions']) end @MetricName = params['MetricName'] end end # GetRespTimeTrendEx返回参数结构体 class GetRespTimeTrendExResponse < TencentCloud::Common::AbstractModel # @param DataPoints: 数据点集合,时延等走势数据 # @type DataPoints: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DataPoints, :RequestId def initialize(datapoints=nil, requestid=nil) @DataPoints = datapoints @RequestId = requestid end def deserialize(params) unless params['DataPoints'].nil? @DataPoints = [] params['DataPoints'].each do |i| datapointmetric_tmp = DataPointMetric.new datapointmetric_tmp.deserialize(i) @DataPoints << datapointmetric_tmp end end @RequestId = params['RequestId'] end end # GetResultSummary请求参数结构体 class GetResultSummaryRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 任务Id列表 # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # GetResultSummary返回参数结构体 class GetResultSummaryResponse < TencentCloud::Common::AbstractModel # @param RealData: 实时统计数据 # @type RealData: Array # @param DayData: 按天的统计数据 # @type DayData: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RealData, :DayData, :RequestId def initialize(realdata=nil, daydata=nil, requestid=nil) @RealData = realdata @DayData = daydata @RequestId = requestid end def deserialize(params) unless params['RealData'].nil? @RealData = [] params['RealData'].each do |i| resultsummary_tmp = ResultSummary.new resultsummary_tmp.deserialize(i) @RealData << resultsummary_tmp end end unless params['DayData'].nil? @DayData = [] params['DayData'].each do |i| resultsummary_tmp = ResultSummary.new resultsummary_tmp.deserialize(i) @DayData << resultsummary_tmp end end @RequestId = params['RequestId'] end end # GetReturnCodeHistory请求参数结构体 class GetReturnCodeHistoryRequest < TencentCloud::Common::AbstractModel # @param TaskId: 正整数。验证成功的拨测任务id # @type TaskId: Integer # @param BeginTime: 开始时间点。格式如:2017-05-09 10:20:00。注意,BeginTime 和 EndTime 需要在同一天 # @type BeginTime: String # @param EndTime: 结束时间点。格式如:2017-05-09 10:25:00。注意,BeginTime 和 EndTime 需要在同一天 # @type EndTime: String # @param Province: 省份名称的全拼 # @type Province: String attr_accessor :TaskId, :BeginTime, :EndTime, :Province def initialize(taskid=nil, begintime=nil, endtime=nil, province=nil) @TaskId = taskid @BeginTime = begintime @EndTime = endtime @Province = province end def deserialize(params) @TaskId = params['TaskId'] @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @Province = params['Province'] end end # GetReturnCodeHistory返回参数结构体 class GetReturnCodeHistoryResponse < TencentCloud::Common::AbstractModel # @param Details: 拨测失败详情列表 # @type Details: Array # @param Summary: 拨测失败汇总列表 # @type Summary: Array # @param BeginTime: 开始时间 # @type BeginTime: String # @param EndTime: 截至时间 # @type EndTime: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Details, :Summary, :BeginTime, :EndTime, :RequestId def initialize(details=nil, summary=nil, begintime=nil, endtime=nil, requestid=nil) @Details = details @Summary = summary @BeginTime = begintime @EndTime = endtime @RequestId = requestid end def deserialize(params) unless params['Details'].nil? @Details = [] params['Details'].each do |i| catreturndetail_tmp = CatReturnDetail.new catreturndetail_tmp.deserialize(i) @Details << catreturndetail_tmp end end unless params['Summary'].nil? @Summary = [] params['Summary'].each do |i| catreturnsummary_tmp = CatReturnSummary.new catreturnsummary_tmp.deserialize(i) @Summary << catreturnsummary_tmp end end @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @RequestId = params['RequestId'] end end # GetReturnCodeInfo请求参数结构体 class GetReturnCodeInfoRequest < TencentCloud::Common::AbstractModel # @param TaskId: 正整数。验证成功的拨测任务id # @type TaskId: Integer # @param BeginTime: 开始时间点。格式如:2017-05-09 10:20:00,最多拉群两天的数据 # @type BeginTime: String # @param EndTime: 结束时间点。格式如:2017-05-09 10:25:00,最多拉群两天的数据 # @type EndTime: String # @param Province: 省份名称的全拼 # @type Province: String attr_accessor :TaskId, :BeginTime, :EndTime, :Province def initialize(taskid=nil, begintime=nil, endtime=nil, province=nil) @TaskId = taskid @BeginTime = begintime @EndTime = endtime @Province = province end def deserialize(params) @TaskId = params['TaskId'] @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @Province = params['Province'] end end # GetReturnCodeInfo返回参数结构体 class GetReturnCodeInfoResponse < TencentCloud::Common::AbstractModel # @param Details: 拨测失败详情列表 # @type Details: Array # @param Summary: 拨测失败汇总列表 # @type Summary: Array # @param BeginTime: 开始时间 # @type BeginTime: String # @param EndTime: 截至时间 # @type EndTime: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Details, :Summary, :BeginTime, :EndTime, :RequestId def initialize(details=nil, summary=nil, begintime=nil, endtime=nil, requestid=nil) @Details = details @Summary = summary @BeginTime = begintime @EndTime = endtime @RequestId = requestid end def deserialize(params) unless params['Details'].nil? @Details = [] params['Details'].each do |i| catreturndetail_tmp = CatReturnDetail.new catreturndetail_tmp.deserialize(i) @Details << catreturndetail_tmp end end unless params['Summary'].nil? @Summary = [] params['Summary'].each do |i| catreturnsummary_tmp = CatReturnSummary.new catreturnsummary_tmp.deserialize(i) @Summary << catreturnsummary_tmp end end @BeginTime = params['BeginTime'] @EndTime = params['EndTime'] @RequestId = params['RequestId'] end end # GetTaskTotalNumber请求参数结构体 class GetTaskTotalNumberRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # GetTaskTotalNumber返回参数结构体 class GetTaskTotalNumberResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 拨测任务总数 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :RequestId def initialize(totalcount=nil, requestid=nil) @TotalCount = totalcount @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # 运营商可用率 class IspDetail < TencentCloud::Common::AbstractModel # @param IspName: 运营商名称 # @type IspName: String # @param AvailRatio: 可用率 # @type AvailRatio: Float # @param AvgTime: 平均耗时 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AvgTime: Float attr_accessor :IspName, :AvailRatio, :AvgTime def initialize(ispname=nil, availratio=nil, avgtime=nil) @IspName = ispname @AvailRatio = availratio @AvgTime = avgtime end def deserialize(params) @IspName = params['IspName'] @AvailRatio = params['AvailRatio'] @AvgTime = params['AvgTime'] end end # 健值对 class KeyValuePair < TencentCloud::Common::AbstractModel # @param Key: 健 # @type Key: String # @param Value: 值 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # 保存string类型字段 class Label < TencentCloud::Common::AbstractModel # @param ID: 自定义字段编号 # @type ID: Integer # @param Name: 自定义字段名称/说明 # @type Name: String # @param Value: 字段值 # @type Value: String attr_accessor :ID, :Name, :Value def initialize(id=nil, name=nil, value=nil) @ID = id @Name = name @Value = value end def deserialize(params) @ID = params['ID'] @Name = params['Name'] @Value = params['Value'] end end # ModifyAgentGroup请求参数结构体 class ModifyAgentGroupRequest < TencentCloud::Common::AbstractModel # @param GroupId: 拨测分组ID # @type GroupId: Integer # @param GroupName: 拨测分组名称 # @type GroupName: String # @param IsDefault: 是否为默认分组。取值可为0,1。取 1 时表示设置为默认分组 # @type IsDefault: Integer # @param Agents: Province, Isp 需要成对地进行选择。参数对的取值范围。参见:DescribeAgents 的返回结果。 # @type Agents: Array attr_accessor :GroupId, :GroupName, :IsDefault, :Agents def initialize(groupid=nil, groupname=nil, isdefault=nil, agents=nil) @GroupId = groupid @GroupName = groupname @IsDefault = isdefault @Agents = agents end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] @IsDefault = params['IsDefault'] unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| catagent_tmp = CatAgent.new catagent_tmp.deserialize(i) @Agents << catagent_tmp end end end end # ModifyAgentGroup返回参数结构体 class ModifyAgentGroupResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyTaskEx请求参数结构体 class ModifyTaskExRequest < TencentCloud::Common::AbstractModel # @param CatTypeName: http, https, ping, tcp, ftp, smtp, udp, dns 之一 # @type CatTypeName: String # @param Url: 拨测的URL,例如:www.qq.com (URL域名解析需要能解析出具体的IP) # @type Url: String # @param Period: 拨测周期。取值可为1,5,15,30之一, 单位:分钟。精度不能低于用户等级规定的最小精度 # @type Period: Integer # @param TaskName: 拨测任务名称不能超过32个字符。同一个用户创建的任务名不可重复 # @type TaskName: String # @param TaskId: 验证成功的拨测任务ID # @type TaskId: Integer # @param AgentGroupId: 拨测分组ID,体现本拨测任务要采用哪些运营商作为拨测源。一般可直接填写本用户的默认拨测分组。参见:DescribeAgentGroupList 接口,本参数使用返回结果里的GroupId的值。注意,Type为0时,AgentGroupId为必填 # @type AgentGroupId: Integer # @param Host: 指定域名(如需要) # @type Host: String # @param Port: 拨测目标的端口号 # @type Port: Integer # @param IsHeader: 是否为Header请求(非0 发起Header 请求。为0,且PostData非空,发起POST请求。为0,PostData为空,发起GET请求) # @type IsHeader: Integer # @param SslVer: URL中含有"https"时有用。缺省为SSLv23。需要为 TLSv1_2, TLSv1_1, TLSv1, SSLv2, SSLv23, SSLv3 之一 # @type SslVer: String # @param PostData: POST 请求数据,空字符串表示非POST请求 # @type PostData: String # @param UserAgent: 用户Agent信息 # @type UserAgent: String # @param CheckStr: 要在结果中进行匹配的字符串 # @type CheckStr: String # @param CheckType: 1 表示通过检查结果是否包含CheckStr 进行校验 # @type CheckType: Integer # @param Cookie: 需要设置的Cookie信息 # @type Cookie: String # @param UserName: 登录服务器的账号。如果为空字符串,表示不用校验用户密码。只做简单连接服务器的拨测 # @type UserName: String # @param PassWord: 登录服务器的密码 # @type PassWord: String # @param ReqDataType: 缺省为0,0 表示请求为字符串类型, 1表示为二进制类型 # @type ReqDataType: Integer # @param ReqData: 发起TCP, UDP请求的协议请求数据 # @type ReqData: String # @param RespDataType: 缺省为0。0 表示请求为字符串类型。1表示为二进制类型 # @type RespDataType: String # @param RespData: 预期的UDP请求的回应数据。字符串型,只需要返回的结果里包含本字符串算校验通过。二进制型,则需要严格等于才算通过 # @type RespData: String # @param DnsSvr: 目的DNS服务器,可以为空字符串 # @type DnsSvr: String # @param DnsCheckIp: 需要检验是否在DNS IP列表的IP。可以为空字符串,表示不校验 # @type DnsCheckIp: String # @param DnsQueryType: 需要为下列值之一。缺省为A。A, MX, NS, CNAME, TXT, ANY # @type DnsQueryType: String # @param UseSecConn: 是否使用安全链接SSL, 0 不使用,1 使用 # @type UseSecConn: Integer # @param NeedAuth: FTP登录验证方式, 0 不验证 1 匿名登录 2 需要身份验证 # @type NeedAuth: Integer # @param Type: Type=0 默认 (站点监控) Type=2 可用率监控 # @type Type: Integer # @param RedirectFollowNum: 跟随跳转次数,取值范围0-5,不传则表示不跟随 # @type RedirectFollowNum: Integer attr_accessor :CatTypeName, :Url, :Period, :TaskName, :TaskId, :AgentGroupId, :Host, :Port, :IsHeader, :SslVer, :PostData, :UserAgent, :CheckStr, :CheckType, :Cookie, :UserName, :PassWord, :ReqDataType, :ReqData, :RespDataType, :RespData, :DnsSvr, :DnsCheckIp, :DnsQueryType, :UseSecConn, :NeedAuth, :Type, :RedirectFollowNum def initialize(cattypename=nil, url=nil, period=nil, taskname=nil, taskid=nil, agentgroupid=nil, host=nil, port=nil, isheader=nil, sslver=nil, postdata=nil, useragent=nil, checkstr=nil, checktype=nil, cookie=nil, username=nil, password=nil, reqdatatype=nil, reqdata=nil, respdatatype=nil, respdata=nil, dnssvr=nil, dnscheckip=nil, dnsquerytype=nil, usesecconn=nil, needauth=nil, type=nil, redirectfollownum=nil) @CatTypeName = cattypename @Url = url @Period = period @TaskName = taskname @TaskId = taskid @AgentGroupId = agentgroupid @Host = host @Port = port @IsHeader = isheader @SslVer = sslver @PostData = postdata @UserAgent = useragent @CheckStr = checkstr @CheckType = checktype @Cookie = cookie @UserName = username @PassWord = password @ReqDataType = reqdatatype @ReqData = reqdata @RespDataType = respdatatype @RespData = respdata @DnsSvr = dnssvr @DnsCheckIp = dnscheckip @DnsQueryType = dnsquerytype @UseSecConn = usesecconn @NeedAuth = needauth @Type = type @RedirectFollowNum = redirectfollownum end def deserialize(params) @CatTypeName = params['CatTypeName'] @Url = params['Url'] @Period = params['Period'] @TaskName = params['TaskName'] @TaskId = params['TaskId'] @AgentGroupId = params['AgentGroupId'] @Host = params['Host'] @Port = params['Port'] @IsHeader = params['IsHeader'] @SslVer = params['SslVer'] @PostData = params['PostData'] @UserAgent = params['UserAgent'] @CheckStr = params['CheckStr'] @CheckType = params['CheckType'] @Cookie = params['Cookie'] @UserName = params['UserName'] @PassWord = params['PassWord'] @ReqDataType = params['ReqDataType'] @ReqData = params['ReqData'] @RespDataType = params['RespDataType'] @RespData = params['RespData'] @DnsSvr = params['DnsSvr'] @DnsCheckIp = params['DnsCheckIp'] @DnsQueryType = params['DnsQueryType'] @UseSecConn = params['UseSecConn'] @NeedAuth = params['NeedAuth'] @Type = params['Type'] @RedirectFollowNum = params['RedirectFollowNum'] end end # ModifyTaskEx返回参数结构体 class ModifyTaskExResponse < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务ID。验证通过后,创建任务时使用,传递给CreateTask 接口。 # @type TaskId: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskId, :RequestId def initialize(taskid=nil, requestid=nil) @TaskId = taskid @RequestId = requestid end def deserialize(params) @TaskId = params['TaskId'] @RequestId = params['RequestId'] end end # 探测节点 class NodeDefine < TencentCloud::Common::AbstractModel # @param Name: 节点名称 # @type Name: String # @param Code: 节点代码 # @type Code: String # @param Type: 节点类型 #
  • 1 = IDC
  • #
  • 2 = LastMile
  • #
  • 3 = Mobile
  • # @type Type: Integer # @param NetService: 网络服务商 # @type NetService: String # @param District: 区域 # @type District: String # @param City: 城市 # @type City: String # @param IPType: IP 类型 #
  • 1 = IPv4
  • #
  • 2 = IPv6
  • # 注意:此字段可能返回 null,表示取不到有效值。 # @type IPType: Integer # @param Location: 区域 #
  • 1 = 中国大陆
  • #
  • 2 = 港澳台
  • #
  • 3 = 国外
  • # 注意:此字段可能返回 null,表示取不到有效值。 # @type Location: Integer # @param CodeType: 节点类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CodeType: String # @param NodeDefineStatus: 节点状态:1-运行,2-下线 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NodeDefineStatus: Integer attr_accessor :Name, :Code, :Type, :NetService, :District, :City, :IPType, :Location, :CodeType, :NodeDefineStatus def initialize(name=nil, code=nil, type=nil, netservice=nil, district=nil, city=nil, iptype=nil, location=nil, codetype=nil, nodedefinestatus=nil) @Name = name @Code = code @Type = type @NetService = netservice @District = district @City = city @IPType = iptype @Location = location @CodeType = codetype @NodeDefineStatus = nodedefinestatus end def deserialize(params) @Name = params['Name'] @Code = params['Code'] @Type = params['Type'] @NetService = params['NetService'] @District = params['District'] @City = params['City'] @IPType = params['IPType'] @Location = params['Location'] @CodeType = params['CodeType'] @NodeDefineStatus = params['NodeDefineStatus'] end end # PauseTask请求参数结构体 class PauseTaskRequest < TencentCloud::Common::AbstractModel # @param TaskId: 拨测任务id # @type TaskId: Integer attr_accessor :TaskId def initialize(taskid=nil) @TaskId = taskid end def deserialize(params) @TaskId = params['TaskId'] end end # PauseTask返回参数结构体 class PauseTaskResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 拨测任务 class ProbeTask < TencentCloud::Common::AbstractModel # @param Name: 任务名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param TaskId: 任务 ID # @type TaskId: String # @param TaskType: 任务类型 # @type TaskType: Integer # @param Nodes: 拨测节点列表 # @type Nodes: Array # @param Interval: 拨测间隔 # @type Interval: Integer # @param Parameters: 拨测参数 # @type Parameters: String # @param Status: 任务状态 # @type Status: Integer # @param TargetAddress: 目标地址 # @type TargetAddress: String # @param PayMode: 付费模式 #
  • 1 = 试用版本
  • #
  • 2 = 付费版本
  • # @type PayMode: Integer # @param OrderState: 订单状态 #
  • 1 = 正常
  • #
  • 2 = 欠费
  • # @type OrderState: Integer # @param TaskCategory: 任务分类 #
  • 1 = PC
  • #
  • 2 = Mobile
  • # @type TaskCategory: Integer # @param CreatedAt: 创建时间 # @type CreatedAt: String # @param Cron: 定时任务cron表达式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Cron: String # @param CronState: 定时任务启动状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CronState: Integer # @param TagInfoList: 任务当前绑定的标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagInfoList: Array attr_accessor :Name, :TaskId, :TaskType, :Nodes, :Interval, :Parameters, :Status, :TargetAddress, :PayMode, :OrderState, :TaskCategory, :CreatedAt, :Cron, :CronState, :TagInfoList def initialize(name=nil, taskid=nil, tasktype=nil, nodes=nil, interval=nil, parameters=nil, status=nil, targetaddress=nil, paymode=nil, orderstate=nil, taskcategory=nil, createdat=nil, cron=nil, cronstate=nil, taginfolist=nil) @Name = name @TaskId = taskid @TaskType = tasktype @Nodes = nodes @Interval = interval @Parameters = parameters @Status = status @TargetAddress = targetaddress @PayMode = paymode @OrderState = orderstate @TaskCategory = taskcategory @CreatedAt = createdat @Cron = cron @CronState = cronstate @TagInfoList = taginfolist end def deserialize(params) @Name = params['Name'] @TaskId = params['TaskId'] @TaskType = params['TaskType'] @Nodes = params['Nodes'] @Interval = params['Interval'] @Parameters = params['Parameters'] @Status = params['Status'] @TargetAddress = params['TargetAddress'] @PayMode = params['PayMode'] @OrderState = params['OrderState'] @TaskCategory = params['TaskCategory'] @CreatedAt = params['CreatedAt'] @Cron = params['Cron'] @CronState = params['CronState'] unless params['TagInfoList'].nil? @TagInfoList = [] params['TagInfoList'].each do |i| keyvaluepair_tmp = KeyValuePair.new keyvaluepair_tmp.deserialize(i) @TagInfoList << keyvaluepair_tmp end end end end # type ProbeTaskBasicConfiguration struct { # TaskID TaskID `json:"TaskId" gorm:"column:task_id"` # Name string `json:"Name" binding:"required" gorm:"column:name"` # TargetAddress string `json:"TargetAddress" binding:"required" gorm:"column:target_address"` # } class ProbeTaskBasicConfiguration < TencentCloud::Common::AbstractModel # @param Name: 拨测任务名称 # @type Name: String # @param TargetAddress: 拨测目标地址 # @type TargetAddress: String attr_accessor :Name, :TargetAddress def initialize(name=nil, targetaddress=nil) @Name = name @TargetAddress = targetaddress end def deserialize(params) @Name = params['Name'] @TargetAddress = params['TargetAddress'] end end # 省份可用率 class ProvinceDetail < TencentCloud::Common::AbstractModel # @param AvgAvailRatio: 可用率 # @type AvgAvailRatio: Float # @param ProvinceName: 省份名称 # @type ProvinceName: String # @param Mapkey: 省份英文名称 # @type Mapkey: String # @param TimeStamp: 统计时间点 # @type TimeStamp: String # @param IspDetail: 分运营商可用率 # @type IspDetail: Array # @param AvgTime: 平均耗时,单位毫秒 # @type AvgTime: Float # @param Province: 省份 # @type Province: String attr_accessor :AvgAvailRatio, :ProvinceName, :Mapkey, :TimeStamp, :IspDetail, :AvgTime, :Province def initialize(avgavailratio=nil, provincename=nil, mapkey=nil, timestamp=nil, ispdetail=nil, avgtime=nil, province=nil) @AvgAvailRatio = avgavailratio @ProvinceName = provincename @Mapkey = mapkey @TimeStamp = timestamp @IspDetail = ispdetail @AvgTime = avgtime @Province = province end def deserialize(params) @AvgAvailRatio = params['AvgAvailRatio'] @ProvinceName = params['ProvinceName'] @Mapkey = params['Mapkey'] @TimeStamp = params['TimeStamp'] unless params['IspDetail'].nil? @IspDetail = [] params['IspDetail'].each do |i| ispdetail_tmp = IspDetail.new ispdetail_tmp.deserialize(i) @IspDetail << ispdetail_tmp end end @AvgTime = params['AvgTime'] @Province = params['Province'] end end # 实时统计数据 class ResultSummary < TencentCloud::Common::AbstractModel # @param LogTime: 统计时间 # @type LogTime: String # @param TaskId: 任务ID # @type TaskId: Integer # @param AvailRatio: 实时可用率 # @type AvailRatio: Float # @param ReponseTime: 实时响应时间 # @type ReponseTime: Float attr_accessor :LogTime, :TaskId, :AvailRatio, :ReponseTime def initialize(logtime=nil, taskid=nil, availratio=nil, reponsetime=nil) @LogTime = logtime @TaskId = taskid @AvailRatio = availratio @ReponseTime = reponsetime end def deserialize(params) @LogTime = params['LogTime'] @TaskId = params['TaskId'] @AvailRatio = params['AvailRatio'] @ReponseTime = params['ReponseTime'] end end # ResumeProbeTask请求参数结构体 class ResumeProbeTaskRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 任务 ID # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # ResumeProbeTask返回参数结构体 class ResumeProbeTaskResponse < TencentCloud::Common::AbstractModel # @param Total: 任务总量 # @type Total: Integer # @param SuccessCount: 任务成功量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SuccessCount: Integer # @param Results: 任务执行详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :SuccessCount, :Results, :RequestId def initialize(total=nil, successcount=nil, results=nil, requestid=nil) @Total = total @SuccessCount = successcount @Results = results @RequestId = requestid end def deserialize(params) @Total = params['Total'] @SuccessCount = params['SuccessCount'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| taskresult_tmp = TaskResult.new taskresult_tmp.deserialize(i) @Results << taskresult_tmp end end @RequestId = params['RequestId'] end end # RunTask请求参数结构体 class RunTaskRequest < TencentCloud::Common::AbstractModel # @param TaskId: 任务Id # @type TaskId: Integer attr_accessor :TaskId def initialize(taskid=nil) @TaskId = taskid end def deserialize(params) @TaskId = params['TaskId'] end end # RunTask返回参数结构体 class RunTaskResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # SuspendProbeTask请求参数结构体 class SuspendProbeTaskRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 任务 ID # @type TaskIds: Array attr_accessor :TaskIds def initialize(taskids=nil) @TaskIds = taskids end def deserialize(params) @TaskIds = params['TaskIds'] end end # SuspendProbeTask返回参数结构体 class SuspendProbeTaskResponse < TencentCloud::Common::AbstractModel # @param Total: 任务总量 # @type Total: Integer # @param SuccessCount: 任务成功量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SuccessCount: Integer # @param Results: 任务执行结果 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :SuccessCount, :Results, :RequestId def initialize(total=nil, successcount=nil, results=nil, requestid=nil) @Total = total @SuccessCount = successcount @Results = results @RequestId = requestid end def deserialize(params) @Total = params['Total'] @SuccessCount = params['SuccessCount'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| taskresult_tmp = TaskResult.new taskresult_tmp.deserialize(i) @Results << taskresult_tmp end end @RequestId = params['RequestId'] end end # 资源的标签,通过标签对资源进行划分用于支持细粒度的鉴权、分账等场景 class Tag < TencentCloud::Common::AbstractModel # @param TagKey: key # @type TagKey: String # @param TagValue: value # @type TagValue: String attr_accessor :TagKey, :TagValue def initialize(tagkey=nil, tagvalue=nil) @TagKey = tagkey @TagValue = tagvalue end def deserialize(params) @TagKey = params['TagKey'] @TagValue = params['TagValue'] end end # 可用性监控任务状态及告警信息 class TaskAlarm < TencentCloud::Common::AbstractModel # @param TaskId: 任务ID # @type TaskId: Integer # @param TaskName: 任务名称 # @type TaskName: String # @param Period: 任务周期,单位为分钟。目前支持1,5,15,30几种取值 # @type Period: Integer # @param CatTypeName: 拨测类型。http, https, ping, tcp, udp, smtp, pop3, dns 之一 # @type CatTypeName: String # @param Status: 任务状态。1表示暂停,2表示运行中,0为初始态 # @type Status: Integer # @param CgiUrl: 拨测任务的URL # @type CgiUrl: String # @param AddTime: 任务创建时间 # @type AddTime: String # @param AlarmStatus: 告警状态。1 故障,0 正常 # @type AlarmStatus: Integer # @param StatusInfo: 告警状态描述,统计信息 # @type StatusInfo: String # @param UpdateTime: 任务更新时间 # @type UpdateTime: String attr_accessor :TaskId, :TaskName, :Period, :CatTypeName, :Status, :CgiUrl, :AddTime, :AlarmStatus, :StatusInfo, :UpdateTime def initialize(taskid=nil, taskname=nil, period=nil, cattypename=nil, status=nil, cgiurl=nil, addtime=nil, alarmstatus=nil, statusinfo=nil, updatetime=nil) @TaskId = taskid @TaskName = taskname @Period = period @CatTypeName = cattypename @Status = status @CgiUrl = cgiurl @AddTime = addtime @AlarmStatus = alarmstatus @StatusInfo = statusinfo @UpdateTime = updatetime end def deserialize(params) @TaskId = params['TaskId'] @TaskName = params['TaskName'] @Period = params['Period'] @CatTypeName = params['CatTypeName'] @Status = params['Status'] @CgiUrl = params['CgiUrl'] @AddTime = params['AddTime'] @AlarmStatus = params['AlarmStatus'] @StatusInfo = params['StatusInfo'] @UpdateTime = params['UpdateTime'] end end # 任务执行结果 class TaskResult < TencentCloud::Common::AbstractModel # @param TaskId: 任务 ID # @type TaskId: String # @param Success: 是否成功 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Success: Boolean # @param ErrorMessage: 错误信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ErrorMessage: String attr_accessor :TaskId, :Success, :ErrorMessage def initialize(taskid=nil, success=nil, errormessage=nil) @TaskId = taskid @Success = success @ErrorMessage = errormessage end def deserialize(params) @TaskId = params['TaskId'] @Success = params['Success'] @ErrorMessage = params['ErrorMessage'] end end # UpdateProbeTaskConfigurationList请求参数结构体 class UpdateProbeTaskConfigurationListRequest < TencentCloud::Common::AbstractModel # @param TaskIds: 任务 ID # @type TaskIds: Array # @param Nodes: 拨测节点 # @type Nodes: Array # @param Interval: 拨测间隔 # @type Interval: Integer # @param Parameters: 拨测参数 # @type Parameters: String # @param Cron: 定时任务cron表达式 # @type Cron: String attr_accessor :TaskIds, :Nodes, :Interval, :Parameters, :Cron def initialize(taskids=nil, nodes=nil, interval=nil, parameters=nil, cron=nil) @TaskIds = taskids @Nodes = nodes @Interval = interval @Parameters = parameters @Cron = cron end def deserialize(params) @TaskIds = params['TaskIds'] @Nodes = params['Nodes'] @Interval = params['Interval'] @Parameters = params['Parameters'] @Cron = params['Cron'] end end # UpdateProbeTaskConfigurationList返回参数结构体 class UpdateProbeTaskConfigurationListResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # VerifyResult请求参数结构体 class VerifyResultRequest < TencentCloud::Common::AbstractModel # @param ResultId: 要查询的拨测任务的结果id # @type ResultId: Integer attr_accessor :ResultId def initialize(resultid=nil) @ResultId = resultid end def deserialize(params) @ResultId = params['ResultId'] end end # VerifyResult返回参数结构体 class VerifyResultResponse < TencentCloud::Common::AbstractModel # @param ErrorReason: 错误的原因 # @type ErrorReason: String # @param ResultCode: 错误号 # @type ResultCode: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ErrorReason, :ResultCode, :RequestId def initialize(errorreason=nil, resultcode=nil, requestid=nil) @ErrorReason = errorreason @ResultCode = resultcode @RequestId = requestid end def deserialize(params) @ErrorReason = params['ErrorReason'] @ResultCode = params['ResultCode'] @RequestId = params['RequestId'] end end end end end