# YAML notes
#   |- means 'scalar block' useful for formatted text
#   > means 'scalar block' but it chomps all newlines. Useful
#     for unformatted text.
en:
  oops: |-
    An unexpected error occurred!
  logstash:
    error: >-
      Error: %{error}
    bootstrap_check:
      persisted_queue_config:
        page-capacity: >-
          Invalid configuration, 'queue.page_capacity' must be less than or equal to 'queue.max_bytes'
    environment:
      jruby-required:  >-
        JRuby is required
      missing-jars: >-
        Could not find jar files under %{pattern}
    pipeline:
      worker-error: |-
        A plugin had an unrecoverable error. Will restart this plugin.
          Pipeline_id:%{pipeline_id}
          Plugin: %{plugin}
          Error: %{error}
      worker-error-debug: |-
        A plugin had an unrecoverable error. Will restart this plugin.
          Pipeline_id:%{pipeline_id}
          Plugin: %{plugin}
          Error: %{error}
          Exception: %{exception}
          Stack: %{stacktrace}
      plugin-loading-error: >-
        Couldn't find any %{type} plugin named '%{name}'. Are you
        sure this is correct? Trying to load the %{name} %{type} plugin
        resulted in this error: %{error}
      plugin-type-loading-error: >-
        Could not find any plugin type named '%{type}'. Check for typos.
        Valid plugin types are 'input' 'filter' and 'output'
      output-worker-unsupported: >-
        %{plugin} output plugin: setting 'workers => %{worker_count}' is not
        supported by this plugin. I will continue working as if you had not set
        this setting.
      output-worker-unsupported-with-message: >-
        %{plugin} output plugin: setting 'workers => %{worker_count}' is not
        supported by this plugin. I will continue working as if you had not set
        this setting. Reason: %{message}
    plugin:
      deprecated_milestone: >-
        %{plugin} plugin is using the 'milestone' method to declare the version
        of the plugin this method is deprecated in favor of declaring the
        version inside the gemspec.
      version:
        0-9-x:
         Using version 0.9.x %{type} plugin '%{name}'. This plugin should work but
         would benefit from use by folks like you. Please let us know if you
         find bugs or have suggestions on how to improve this plugin.
        0-1-x: >-
         Using version 0.1.x %{type} plugin '%{name}'. This plugin isn't well
         supported by the community and likely has no maintainer.
    agent:
      sighup: >-
        SIGHUP received.
      sigint: >-
        SIGINT received. Shutting down.
      sigterm: >-
        SIGTERM received. Shutting down.
      slow_shutdown: |-
        Received shutdown signal, but pipeline is still waiting for in-flight events
        to be processed. Sending another ^C will force quit Logstash, but this may cause
        data loss.
      forced_sigint: >-
        SIGINT received. Terminating immediately..
      non_reloadable_config_reload: >-
        Unable to reload configuration because it does not support dynamic reloading
      non_reloadable_config_register: |-
        Logstash is not able to start since configuration auto reloading was enabled but the configuration contains plugins that don't support it. Quitting...
    web_api:
      cant_bind_to_port: |-
        Logstash tried to bind to port %{port}, but the port is already in use. You can specify a new port by launching logstash with the --http.port option."
      cant_bind_to_port_in_range: |-
        Logstash tried to bind to port range %{http_ports}, but all the ports are already in use. You can specify a new port by launching logstash with the --http.port option."
      hot_threads:
        title: |-
          ::: {%{hostname}}
          Hot threads at %{time}, busiestThreads=%{top_count}:
        thread_title: |-
          %{percent_of_cpu_time} % of cpu usage, state: %{thread_state}, thread name: '%{thread_name}', thread id: %{thread_id}
      logging:
        unrecognized_option: |-
          unrecognized option [%{option}]
    modules:
      configuration:
        parse-failed: |-
          Failed to parse the module configuration: [%{error}]
        modules-must-be-unique: >-
          Only a single instance of any module can be run at a time. Duplicate
          modules: %{duplicate_modules}
        modules-invalid-name: >-
          Invalid module name: %{module_name}
        modules-variables-malformed: >-
          Failed to parse module variable %{rawvar}.  Must be in -M
          "MODULE_NAME.KEY.SUBKEY=VALUE" format
        modules-unavailable: >-
          The modules specified are not available yet.
          Specified modules: %{specified_modules}
          Available modules: %{available_modules}
        elasticsearch_connection_failed: >-
          Failed to import module configurations to Elasticsearch and/or Kibana.
          Module: %{module_name} has Elasticsearch hosts: %{elasticsearch_hosts} and Kibana hosts: %{kibana_hosts}
        modules-too-many-specified: >-
          Too many modules specified. Maximum allowed: %{max}, specified: %{specified_modules}

    runner:
      short-help: |-
        usage:
          bin/logstash -f CONFIG_PATH [-t] [-r] [] [-w COUNT] [-l LOG]
          bin/logstash --modules MODULE_NAME [-M "MODULE_NAME.var.PLUGIN_TYPE.PLUGIN_NAME.VARIABLE_NAME=VALUE"] [-t] [-w COUNT] [-l LOG]
          bin/logstash -e CONFIG_STR [-t] [--log.level fatal|error|warn|info|debug|trace] [-w COUNT] [-l LOG]
          bin/logstash -i SHELL [--log.level fatal|error|warn|info|debug|trace]
          bin/logstash -V [--log.level fatal|error|warn|info|debug|trace]
          bin/logstash --help
      invalid-configuration: >-
        The given configuration is invalid. Reason: %{error}
      missing-configuration: >-
        No configuration file was specified. Perhaps you forgot to provide
        the '-f yourlogstash.conf' flag?
      config-string-path-exclusive:
        Settings 'path.config' (-f) and 'config.string' (-e) can't be used simultaneously.
      config-module-exclusive: >-
        Settings 'path.config' (-f) or 'config.string' (-e) can't be used in conjunction with
        (--modules) or the "modules:" block in the logstash.yml file.
      reload-with-modules: >-
        Configuration reloading can't be used with command-line or logstash.yml specified modules.
      cli-module-override: >-
        Both command-line and logstash.yml modules configurations detected.
        Using command-line module configuration to override logstash.yml module configuration.
      config-pipelines-failed-read: >-
        Failed to read pipelines yaml file. Location: %{path}
      config-pipelines-empty: >-
        Pipelines YAML file is empty. Location: %{path}
      config-pipelines-invalid: >-
        Pipelines YAML file must contain an array of pipeline configs. Found "%{invalid_class}" in %{path}
      reload-without-config-path: >-
        Configuration reloading also requires passing a configuration path with '-f yourlogstash.conf'
      reload-with-config-string: >-
        Configuration reloading can't be used with 'config.string' (-e).
      locked-data-path: >-
        Logstash could not be started because there is already another instance using the configured data directory.  If you wish to run multiple instances, you must change the "path.data" setting.
      invalid-shell: >-
        Invalid option for interactive Ruby shell. Use either "irb" or "pry"
      configtest-flag-information: |-
        You may be interested in the '--configtest' flag which you can use to validate
        logstash's configuration before you choose to restart a running system.
      configuration:
        obsolete: >-
          The setting `%{name}` in plugin `%{plugin}` is obsolete and is no
          longer available. %{extra} If you have any questions about this, you
          are invited to visit https://discuss.elastic.co/c/logstash and ask.
        file-not-found: |-
          No config files found: %{path}. Can you make sure this path is a logstash config file?
        scheme-not-supported: |-
          URI scheme not supported: %{path}
          Either pass a local file path or "file|http://" URI
        fetch-failed: |-
          Unable to fetch config from: %{path}
          Reason: %{message}
        setting_missing: |-
          Missing a required setting for the %{plugin} %{type} plugin:

            %{type} {
              %{plugin} {
                %{setting} => # SETTING MISSING
                ...
              }
            }
        setting_invalid: |-
          Invalid setting for %{plugin} %{type} plugin:

            %{type} {
              %{plugin} {
                # This setting must be a %{value_type}
                # %{note}
                %{setting} => %{value}
                ...
              }
            }
        invalid_plugin_settings: >-
          Something is wrong with your configuration.
        invalid_plugin_settings_duplicate_keys: |-
          Duplicate keys found in your configuration: [%{keys}]
          At line: %{line}, column %{column} (byte %{byte})
          after %{after}
        invalid_plugin_register: >-
          Cannot register %{plugin} %{type} plugin.
          The error reported is:
            %{error}
        plugin_path_missing: >-
          You specified a plugin path that does not exist: %{path}
        no_plugins_found: |-
          Could not find any plugins in "%{path}"
          I tried to find files matching the following, but found none:
            %{plugin_glob}
        log_file_failed: |-
          Failed to open %{path} for writing: %{error}

          This is often a permissions issue, or the wrong
          path was specified?
      flag:
        # Note: Wrap these at 55 chars so they display nicely when clamp emits
        # them in an 80-character terminal
        config: |+
          Load the logstash config from a specific file
          or directory.  If a directory is given, all
          files in that directory will be concatenated
          in lexicographical order and then parsed as a
          single config file. You can also specify
          wildcards (globs) and any matched files will
          be loaded in the order described above.
        config-string: |+
          Use the given string as the configuration
          data. Same syntax as the config file. If no
          input is specified, then the following is
          used as the default input:
          "%{default_input}"
          and if no output is specified, then the
          following is used as the default output:
          "%{default_output}"
          If you wish to use both defaults, please use
          the empty string for the '-e' flag.
        field-reference-parser: |+
          (DEPRECATED) This option is no longer
          configurable.

          Use the given MODE when parsing field
          references.

          The field reference parser is used to expand
          field references in your pipeline configs,
          and has become more strict to better handle
          ambiguous- and illegal-syntax inputs.

          The only available MODE is:
           - `STRICT`: parse in a strict manner; when
             given ambiguous- or illegal-syntax input,
             raises a runtime exception that should
             be handled by the calling plugin.

        modules: |+
          Load Logstash modules.
          Modules can be defined using multiple instances
          '--modules module1 --modules module2',
             or comma-separated syntax
          '--modules=module1,module2'
          Cannot be used in conjunction with '-e' or '-f'
          Use of '--modules' will override modules declared
          in the 'logstash.yml' file.
        modules_variable: |+
          Load variables for module template.
          Multiple instances of '-M' or
          '--modules.variable' are supported.
          Ignored if '--modules' flag is not used.
          Should be in the format of
          '-M "MODULE_NAME.var.PLUGIN_TYPE.PLUGIN_NAME.VARIABLE_NAME=VALUE"'
          as in
          '-M "example.var.filter.mutate.fieldname=fieldvalue"'
        modules_setup: |+
          Load index template into Elasticsearch, and saved searches, 
          index-pattern, visualizations, and dashboards into Kibana when
          running modules.
        cloud_id: |+
          Sets the elasticsearch and kibana host settings for
          module connections in Elastic Cloud.
          Your Elastic Cloud User interface or the Cloud support
          team should provide this.
          Add an optional label prefix '<label>:' to help you
          identify multiple cloud.ids.
          e.g. 'staging:dXMtZWFzdC0xLmF3cy5mb3VuZC5pbyRub3RhcmVhbCRpZGVudGlmaWVy'
        cloud_auth: |+
          Sets the elasticsearch and kibana username and password
          for module connections in Elastic Cloud
          e.g. 'username:<password>'
        configtest: |+
          Check configuration for valid syntax and then exit.
        http_host: Web API binding host
        http_port: Web API http port
        pipeline-id: |+
          Sets the ID of the pipeline.
        pipeline-workers: |+
          Sets the number of pipeline workers to run.
        java-execution: |+
          (Beta) Use new Java execution engine.
        pipeline-batch-size: |+
          Size of batches the pipeline is to work in.
        pipeline-batch-delay: |+
          When creating pipeline batches, how long to wait while polling
          for the next event.
        path_settings: |+
          Directory containing logstash.yml file. This can also be
          set through the LS_SETTINGS_DIR environment variable.
        path_logs: |+
            Directory to Write Logstash internal logs to.
        auto_reload: |+
          Monitor configuration changes and reload
          whenever it is changed.
          NOTE: use SIGHUP to manually reload the config
        reload_interval: |+
          How frequently to poll the configuration location
          for changes, in seconds.
        log: |+
          Write logstash internal logs to the given
          file. Without this flag, logstash will emit
          logs to standard output.
        verbosity: |+
          Increase verbosity of logstash internal logs.
          Specifying once will show 'informational'
          logs. Specifying twice will show 'debug'
          logs. This flag is deprecated. You should use
          --log-level=info or --log-level=debug instead.
        version: |+
          Emit the version of logstash and its friends,
          then exit.
        datapath: |+
          This should point to a writable directory. Logstash
          will use this directory whenever it needs to store
          data. Plugins will also have access to this path.
        pluginpath: |+
          A path of where to find plugins. This flag
          can be given multiple times to include
          multiple paths. Plugins are expected to be
          in a specific directory hierarchy:
          'PATH/logstash/TYPE/NAME.rb' where TYPE is
          'inputs' 'filters', 'outputs' or 'codecs'
          and NAME is the name of the plugin.
        log_level: |+
          Set the log level for logstash. Possible values are:
            - fatal
            - error
            - warn
            - info
            - debug
            - trace
        unsafe_shutdown: |+
          Force logstash to exit during shutdown even
          if there are still inflight events in memory.
          By default, logstash will refuse to quit until all
          received events have been pushed to the outputs.
        rubyshell: |+
          Drop to shell instead of running as normal.
          Valid shells are "irb" and "pry"
        name: |+
          Specify the name of this logstash instance, if no value is given
          it will default to the current hostname.
        config_debug: |+
          Print the compiled config ruby code out as a debug log (you must also have --log.level=debug enabled).
          WARNING: This will include any 'password' options passed to plugin configs as plaintext, and may result
          in plaintext passwords appearing in your logs!
        log_format: |+
          Specify if Logstash should write its own logs in JSON form (one
          event per line) or in plain text (using Ruby's Object#inspect)
        debug: |+
          Set the log level to debug.
          DEPRECATED: use --log.level=debug instead.
        verbose: |+
          Set the log level to info.
          DEPRECATED: use --log.level=info instead.
        quiet: |+
          Set the log level to info.
          DEPRECATED: use --log.level=info instead.