== copyright-statement === {blank} [[copyright]] [align="left"] Copyright © {{ docyear }} by The Institute of Electrical and Electronics Engineers, Inc. + Three Park Avenue + New York, New York 10016-5997, USA All rights reserved. == license-statement === {blank} This document is an unapproved draft of a proposed IEEE Standard. As such, this document is subject to change. USE AT YOUR OWN RISK! IEEE copyright statements SHALL NOT BE REMOVED from draft or approved IEEE standards, or modified in any way. Because this is an unapproved draft, this document must not be utilized for any conformance/compliance purposes. Permission is hereby granted for officers from each IEEE Standards Working Group or Committee to reproduce the draft document developed by that Working Group for purposes of international standardization consideration. IEEE Standards Department must be informed of the submission for consideration prior to any reproduction for international standardization consideration (stds-ipr@ieee.org). Prior to adoption of this document, in whole or in part, by another standards development organization, permission must first be obtained from the IEEE Standards Department (stds-ipr@ieee.org). When requesting permission, IEEE Standards Department will require a copy of the standard development organization's document highlighting the use of IEEE content. Other entities seeking permission to reproduce this document, in whole or in part, must also obtain permission from the IEEE Standards Department. [align="left"] IEEE Standards Department + 445 Hoes Lane + Piscataway, NJ 08854, USA == legal-statement [[boilerplate-disclaimers]] === Important Notices and Disclaimers Concerning IEEE Standards Documents [[_DV_M4]] IEEE Standards documents are made available for use subject to important notices and legal disclaimers. These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html[]), appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” ==== Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards through an accredited consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed by volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE makes no warranties or representations concerning its standards, and expressly disclaims all warranties, express or implied, concerning this standard, including but not limited to the warranties of merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant or represent that the use of the material contained in its standards is free from patent infringement. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. ==== Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE standard. ==== Official statements A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that the presenter’s views should be considered the personal views of that individual rather than the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group. ==== Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE or IEEE SA. However, *IEEE does not provide interpretations, consulting information, or advice pertaining to IEEE Standards documents*. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its Societies and Standards Coordinating Committees are not able to provide an instant response to comments, or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in evaluating comments or in revisions to an IEEE standard is welcome to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab in the Manage Profile & Interests area of the https://development.standards.ieee.org/myproject-web/public/view.html#landing[IEEE SA myProject system].footnote:[Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing[].] An IEEE Account is needed to access the application. Comments on standards should be submitted using the https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html[Contact Us] form.footnote:[Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html[].] ==== Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. ==== Data privacy Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and data ownership in the context of assessing and using the standards in compliance with applicable laws and regulations. ==== Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. ==== Photocopies Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400; \https://www.copyright.com/. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. ==== Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit https://ieeexplore.ieee.org/browse/standards/collection/ieee/[IEEE Xplore] or https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html[contact IEEE].footnote:[Available at https://ieeexplore.ieee.org/browse/standards/collection/ieee[].] For more information about the IEEE SA or IEEE’s standards development process, visit the IEEE SA Website. ==== Errata Errata, if any, for all IEEE standards can be accessed on the https://standards.ieee.org/standard/index.html[IEEE SA Website].footnote:[Available at: https://standards.ieee.org/standard/index.html[].] Search for standard number and year of approval to access the web page of the published standard. Errata links are located under the Additional Resources Details section. Errata are also available in https://ieeexplore.ieee.org/browse/standards/collection/ieee/[IEEE Xplore]. Users are encouraged to periodically check for errata. ==== Patents IEEE Standards are developed in compliance with the https://standards.ieee.org/about/sasb/patcom/materials.html[IEEE SA Patent Policy].footnote:[Available at: https://standards.ieee.org/about/sasb/patcom/materials.html[].] Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html[]. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. ==== IMPORTANT NOTICE IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. IEEE Standards development activities consider research and information presented to the standards development group in developing any safety recommendations. Other information about safety practices, changes in technology or technology implementation, or impact by peripheral systems also may be pertinent to safety considerations during implementation of the standard. Implementers and users of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. [[boilerplate-participants]] === Participants [[boilerplate-participants-wg]] ==== {blank} At the time this draft {{ doctype }} was completed, the {{ working_group }} had the following membership: ++++ ++++ * {blank} name::: <Chair Name> role::: Chair * {blank} name::: <Vice-chair Name> role::: Vice Chair * {blank} name::: Participant1 role::: Member * {blank} name::: Participant2 role::: Member * {blank} name::: Participant3 role::: Member * {blank} name::: Participant4 role::: Member * {blank} name::: Participant5 role::: Member * {blank} name::: Participant6 role::: Member * {blank} name::: Participant7 role::: Member * {blank} name::: Participant8 role::: Member * {blank} name::: Participant9 role::: Member ++++ ++++ [[boilerplate-participants-bg]] ==== {blank} The following members of the {{ balloting_group_type }} {{ balloting_group }} Standards Association balloting group voted on this {{ doctype }}. Balloters may have voted for approval, disapproval, or abstention. ++++ ++++ * {blank} name::: Balloter1 role::: Member * {blank} name::: Balloter2 role::: Member * {blank} name::: Balloter3 role::: Member * {blank} name::: Balloter4 role::: Member * {blank} name::: Balloter5 role::: Member * {blank} name::: Balloter6 role::: Member * {blank} name::: Balloter7 role::: Member * {blank} name::: Balloter8 role::: Member * {blank} name::: Balloter9 role::: Member ++++ ++++ [[boilerplate-participants-sb]] ==== {blank} When the IEEE SA Standards Board approved this {{ doctype }} on {{ issueddate }}, it had the following membership: ++++ ++++ * {blank} name::: <Name> role::: Chair * {blank} name::: <Name> role::: Vice Chair * {blank} name::: <Name> role::: Past Chair * {blank} name::: <Name> role::: Secretary * {blank} name::: SBMember1 role::: Member * {blank} name::: SBMember2 role::: Member * {blank} name::: SBMember3 role::: Member * {blank} name::: SBMember4 role::: Member * {blank} name::: SBMember5 role::: Member * {blank} name::: SBMember6 role::: Member * {blank} name::: SBMember7 role::: Member * {blank} name::: SBMember8 role::: Member * {blank} name::: SBMember9 role::: Member ++++ ++++ [type=emeritus_sign] span:cite_fn[*]Member Emeritus == feedback-statement === {blank} [align=left] The Institute of Electrical and Electronics Engineers, Inc. + 3 Park Avenue, New York, NY 10016-5997, USA === {blank} Copyright © {{ docyear }} by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published {{ issueddate }}. Printed in the United States of America. === {blank} IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated. === {blank} [[_isbn_pdf_print]] [%unnumbered] |=== |PDF: |ISBN {{ isbn_pdf }} |{{ stdid_pdf}} |Print: |ISBN {{ isbn_print }} |{{ stdid_print}} |=== === {blank} _IEEE prohibits discrimination, harassment, and bullying._ + _For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html[]._ + _No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher._ {% if docsubtype == "Amendment" or docsubtype == "Corrigendum" %} == {blank} [[boilerplate_front]] [NOTE,type=boilerplate] -- The editing instructions contained in this {{ docsubtype | downcase }} define how to merge the material contained therein into the existing base standard and its amendments to form the comprehensive standard. The editing instructions are shown in *__bold italic__*. Four editing instructions are used: change, delete, insert, and replace. *__Change__* is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using [strike]#strikethrough# (to remove old material) and [underline]#underscore# (to add new material). *__Delete__* removes existing material. *__Insert__* adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions are given in the editing instruction. *__Replace__* is used to make changes in figures or equations by removing the existing figure or equation and replacing it with a new one. Editing instructions, change markings, and this NOTE will not be carried over into future editions because the changes will be incorporated into the base standard. -- {% else %} [[boilerplate_word_usage]] == Word usage The word _shall_ indicates mandatory requirements strictly to be followed in order to conform to the standard and from which no deviation is permitted (_shall_ equals _is required to_).footnote:[The use of the word _must_ is deprecated and cannot be used when stating mandatory requirements; _must_ is used only to describe unavoidable situations.]footnote:[The use of _will_ is deprecated and cannot be used when stating mandatory requirements; _will_ is only used in statements of fact.] The word _should_ indicates that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others; or that a certain course of action is preferred but not necessarily required (_should_ equals _is recommended that_). The word _may_ is used to indicate a course of action permissible within the limits of the standard (_may_ equals _is permitted to_). The word _can_ is used for statements of possibility and capability, whether material, physical, or causal (_can_ equals _is able to_). {% endif %}