# frozen_string_literal: true
# Copyright 2024 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
module Google
module Maps
module FleetEngine
module V1
# `CreateVehicle` request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] parent
# @return [::String]
# Required. Must be in the format `providers/{provider}`.
# The provider must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] vehicle_id
# @return [::String]
# Required. Unique Vehicle ID.
# Subject to the following restrictions:
#
# * Must be a valid Unicode string.
# * Limited to a maximum length of 64 characters.
# * Normalized according to [Unicode Normalization Form C]
# (http://www.unicode.org/reports/tr15/).
# * May not contain any of the following ASCII characters: '/', ':', '?',
# ',', or '#'.
# @!attribute [rw] vehicle
# @return [::Google::Maps::FleetEngine::V1::Vehicle]
# Required. The Vehicle entity to create. When creating a Vehicle, the
# following fields are required:
#
# * `vehicleState`
# * `supportedTripTypes`
# * `maximumCapacity`
# * `vehicleType`
#
# When creating a Vehicle, the following fields are ignored:
#
# * `name`
# * `currentTrips`
# * `availableCapacity`
# * `current_route_segment`
# * `current_route_segment_end_point`
# * `current_route_segment_version`
# * `current_route_segment_traffic`
# * `route`
# * `waypoints`
# * `waypoints_version`
# * `remaining_distance_meters`
# * `remaining_time_seconds`
# * `eta_to_next_waypoint`
# * `navigation_status`
#
# All other fields are optional and used if provided.
class CreateVehicleRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `GetVehicle` request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] name
# @return [::String]
# Required. Must be in the format
# `providers/{provider}/vehicles/{vehicle}`.
# The provider must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] current_route_segment_version
# @return [::Google::Protobuf::Timestamp]
# Indicates the minimum timestamp (exclusive) for which
# `Vehicle.current_route_segment` is retrieved.
# If the route is unchanged since this timestamp, the `current_route_segment`
# field is not set in the response. If a minimum is unspecified, the
# `current_route_segment` is always retrieved.
# @!attribute [rw] waypoints_version
# @return [::Google::Protobuf::Timestamp]
# Indicates the minimum timestamp (exclusive) for which `Vehicle.waypoints`
# data is retrieved. If the waypoints are unchanged since this timestamp, the
# `vehicle.waypoints` data is not set in the response. If this field is
# unspecified, `vehicle.waypoints` is always retrieved.
class GetVehicleRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `UpdateVehicle request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] name
# @return [::String]
# Required. Must be in the format
# `providers/{provider}/vehicles/{vehicle}`.
# The \\{provider} must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] vehicle
# @return [::Google::Maps::FleetEngine::V1::Vehicle]
# Required. The `Vehicle` entity values to apply. When updating a `Vehicle`,
# the following fields may not be updated as they are managed by the
# server.
#
# * `available_capacity`
# * `current_route_segment_version`
# * `current_trips`
# * `name`
# * `waypoints_version`
#
# If the `attributes` field is updated, **all** the vehicle's attributes are
# replaced with the attributes provided in the request. If you want to update
# only some attributes, see the `UpdateVehicleAttributes` method.
#
# Likewise, the `waypoints` field can be updated, but must contain all the
# waypoints currently on the vehicle, and no other waypoints.
# @!attribute [rw] update_mask
# @return [::Google::Protobuf::FieldMask]
# Required. A field mask indicating which fields of the `Vehicle` to update.
# At least one field name must be provided.
class UpdateVehicleRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `UpdateVehicleAttributes` request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] name
# @return [::String]
# Required. Must be in the format `providers/{provider}/vehicles/{vehicle}`.
# The provider must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] attributes
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttribute>]
# Required. The vehicle attributes to update. Unmentioned attributes are not
# altered or removed.
class UpdateVehicleAttributesRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `UpdateVehicleAttributes` response message.
# @!attribute [rw] attributes
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttribute>]
# Required. The updated full list of vehicle attributes, including new,
# altered, and untouched attributes.
class UpdateVehicleAttributesResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `SearchVehicles` request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] parent
# @return [::String]
# Required. Must be in the format `providers/{provider}`.
# The provider must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] pickup_point
# @return [::Google::Maps::FleetEngine::V1::TerminalLocation]
# Required. The pickup point to search near.
# @!attribute [rw] dropoff_point
# @return [::Google::Maps::FleetEngine::V1::TerminalLocation]
# The customer's intended dropoff location. The field is required if
# `trip_types` contains `TripType.SHARED`.
# @!attribute [rw] pickup_radius_meters
# @return [::Integer]
# Required. Defines the vehicle search radius around the pickup point. Only
# vehicles within the search radius will be returned. Value must be between
# 400 and 10000 meters (inclusive).
# @!attribute [rw] count
# @return [::Integer]
# Required. Specifies the maximum number of vehicles to return. The value
# must be between 1 and 50 (inclusive).
# @!attribute [rw] minimum_capacity
# @return [::Integer]
# Required. Specifies the number of passengers being considered for a trip.
# The value must be greater than or equal to one. The driver is not
# considered in the capacity value.
# @!attribute [rw] trip_types
# @return [::Array<::Google::Maps::FleetEngine::V1::TripType>]
# Required. Represents the type of proposed trip. Must include exactly one
# type. `UNKNOWN_TRIP_TYPE` is not allowed. Restricts the search to only
# those vehicles that can support that trip type.
# @!attribute [rw] maximum_staleness
# @return [::Google::Protobuf::Duration]
# Restricts the search to only those vehicles that have sent location updates
# to Fleet Engine within the specified duration. Stationary vehicles still
# transmitting their locations are not considered stale. If this field is not
# set, the server uses five minutes as the default value.
# @!attribute [rw] vehicle_types
# @return [::Array<::Google::Maps::FleetEngine::V1::Vehicle::VehicleType>]
# Required. Restricts the search to vehicles with one of the specified types.
# At least one vehicle type must be specified. VehicleTypes with a category
# of `UNKNOWN` are not allowed.
# @!attribute [rw] required_attributes
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttribute>]
# Callers can form complex logical operations using any combination of the
# `required_attributes`, `required_one_of_attributes`, and
# `required_one_of_attribute_sets` fields.
#
# `required_attributes` is a list; `required_one_of_attributes` uses a
# message which allows a list of lists. In combination, the two fields allow
# the composition of this expression:
#
# ```
# (required_attributes[0] AND required_attributes[1] AND ...)
# AND
# (required_one_of_attributes[0][0] OR required_one_of_attributes[0][1] OR
# ...)
# AND
# (required_one_of_attributes[1][0] OR required_one_of_attributes[1][1] OR
# ...)
# ```
#
# Restricts the search to only those vehicles with the specified attributes.
# This field is a conjunction/AND operation. A max of 50 required_attributes
# is allowed. This matches the maximum number of attributes allowed on a
# vehicle.
# @!attribute [rw] required_one_of_attributes
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttributeList>]
# Restricts the search to only those vehicles with at least one of
# the specified attributes in each `VehicleAttributeList`. Within each
# list, a vehicle must match at least one of the attributes. This field is an
# inclusive disjunction/OR operation in each `VehicleAttributeList` and a
# conjunction/AND operation across the collection of `VehicleAttributeList`.
# @!attribute [rw] required_one_of_attribute_sets
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttributeList>]
# `required_one_of_attribute_sets` provides additional functionality.
#
# Similar to `required_one_of_attributes`, `required_one_of_attribute_sets`
# uses a message which allows a list of lists, allowing expressions such as
# this one:
#
# ```
# (required_attributes[0] AND required_attributes[1] AND ...)
# AND
# (
# (required_one_of_attribute_sets[0][0] AND
# required_one_of_attribute_sets[0][1] AND
# ...)
# OR
# (required_one_of_attribute_sets[1][0] AND
# required_one_of_attribute_sets[1][1] AND
# ...)
# )
# ```
#
# Restricts the search to only those vehicles with all the attributes in a
# `VehicleAttributeList`. Within each list, a
# vehicle must match all of the attributes. This field is a conjunction/AND
# operation in each `VehicleAttributeList` and inclusive disjunction/OR
# operation across the collection of `VehicleAttributeList`.
# @!attribute [rw] order_by
# @return [::Google::Maps::FleetEngine::V1::SearchVehiclesRequest::VehicleMatchOrder]
# Required. Specifies the desired ordering criterion for results.
# @!attribute [rw] include_back_to_back
# @return [::Boolean]
# This indicates if vehicles with a single active trip are eligible for this
# search. This field is only used when `current_trips_present` is
# unspecified. When `current_trips_present` is unspecified and this field
# is `false`, vehicles with assigned trips are excluded from the search
# results. When `current_trips_present` is unspecified and this field is
# `true`, search results can include vehicles with one active trip that has a
# status of `ENROUTE_TO_DROPOFF`. When `current_trips_present` is specified,
# this field cannot be set to true.
#
# The default value is `false`.
# @!attribute [rw] trip_id
# @return [::String]
# Indicates the trip associated with this `SearchVehicleRequest`.
# @!attribute [rw] current_trips_present
# @return [::Google::Maps::FleetEngine::V1::SearchVehiclesRequest::CurrentTripsPresent]
# This indicates if vehicles with active trips are eligible for this search.
# This must be set to something other than
# `CURRENT_TRIPS_PRESENT_UNSPECIFIED` if `trip_type` includes `SHARED`.
# @!attribute [rw] filter
# @return [::String]
# Optional. A filter query to apply when searching vehicles. See
# http://aip.dev/160 for examples of the filter syntax.
#
# This field is designed to replace the `required_attributes`,
# `required_one_of_attributes`, and `required_one_of_attributes_sets` fields.
# If a non-empty value is specified here, the following fields must be empty:
# `required_attributes`, `required_one_of_attributes`, and
# `required_one_of_attributes_sets`.
#
# This filter functions as an AND clause with other constraints,
# such as `minimum_capacity` or `vehicle_types`.
#
# Note that the only queries supported are on vehicle attributes (for
# example, `attributes.<key> = <value>` or `attributes.<key1> = <value1> AND
# attributes.<key2> = <value2>`). The maximum number of restrictions allowed
# in a filter query is 50.
#
# Also, all attributes are stored as strings, so the only supported
# comparisons against attributes are string comparisons. In order to compare
# against number or boolean values, the values must be explicitly quoted to
# be treated as strings (for example, `attributes.<key> = "10"` or
# `attributes.<key> = "true"`).
class SearchVehiclesRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
# Specifies the order of the vehicle matches in the response.
module VehicleMatchOrder
# Default, used for unspecified or unrecognized vehicle matches order.
UNKNOWN_VEHICLE_MATCH_ORDER = 0
# Ascending order by vehicle driving time to the pickup point.
PICKUP_POINT_ETA = 1
# Ascending order by vehicle driving distance to the pickup point.
PICKUP_POINT_DISTANCE = 2
# Ascending order by vehicle driving time to the dropoff point. This order
# can only be used if the dropoff point is specified in the request.
DROPOFF_POINT_ETA = 3
# Ascending order by straight-line distance from the vehicle's last
# reported location to the pickup point.
PICKUP_POINT_STRAIGHT_DISTANCE = 4
# Ascending order by the configured match cost. Match cost is defined as a
# weighted calculation between straight-line distance and ETA. Weights are
# set with default values and can be modified per customer. Please contact
# Google support if these weights need to be modified for your project.
COST = 5
end
# Specifies the types of restrictions on a vehicle's current trips.
module CurrentTripsPresent
# The availability of vehicles with trips present is governed by the
# `include_back_to_back` field.
CURRENT_TRIPS_PRESENT_UNSPECIFIED = 0
# Vehicles without trips can appear in search results. When this value is
# used, `include_back_to_back` cannot be `true`.
NONE = 1
# Vehicles with at most 5 current trips and 10 waypoints are included
# in the search results. When this value is used, `include_back_to_back`
# cannot be `true`.
ANY = 2
end
end
# `SearchVehicles` response message.
# @!attribute [rw] matches
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleMatch>]
# List of vehicles that match the `SearchVehiclesRequest` criteria, ordered
# according to `SearchVehiclesRequest.order_by` field.
class SearchVehiclesResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `ListVehicles` request message.
# @!attribute [rw] header
# @return [::Google::Maps::FleetEngine::V1::RequestHeader]
# The standard Fleet Engine request header.
# @!attribute [rw] parent
# @return [::String]
# Required. Must be in the format `providers/{provider}`.
# The provider must be the Project ID (for example, `sample-cloud-project`)
# of the Google Cloud Project of which the service account making
# this call is a member.
# @!attribute [rw] page_size
# @return [::Integer]
# The maximum number of vehicles to return.
# Default value: 100.
# @!attribute [rw] page_token
# @return [::String]
# The value of the `next_page_token` provided by a previous call to
# `ListVehicles` so that you can paginate through groups of vehicles. The
# value is undefined if the filter criteria of the request is not the same as
# the filter criteria for the previous call to `ListVehicles`.
# @!attribute [rw] minimum_capacity
# @return [::Google::Protobuf::Int32Value]
# Specifies the required minimum capacity of the vehicle. All vehicles
# returned will have a `maximum_capacity` greater than or equal to this
# value. If set, must be greater or equal to 0.
# @!attribute [rw] trip_types
# @return [::Array<::Google::Maps::FleetEngine::V1::TripType>]
# Restricts the response to vehicles that support at least one of the
# specified trip types.
# @!attribute [rw] maximum_staleness
# @return [::Google::Protobuf::Duration]
# Restricts the response to vehicles that have sent location updates to Fleet
# Engine within the specified duration. Stationary vehicles still
# transmitting their locations are not considered stale. If present, must be
# a valid positive duration.
# @!attribute [rw] vehicle_type_categories
# @return [::Array<::Google::Maps::FleetEngine::V1::Vehicle::VehicleType::Category>]
# Required. Restricts the response to vehicles with one of the specified type
# categories. `UNKNOWN` is not allowed.
# @!attribute [rw] required_attributes
# @return [::Array<::String>]
# Callers can form complex logical operations using any combination of the
# `required_attributes`, `required_one_of_attributes`, and
# `required_one_of_attribute_sets` fields.
#
# `required_attributes` is a list; `required_one_of_attributes` uses a
# message which allows a list of lists. In combination, the two fields allow
# the composition of this expression:
#
# ```
# (required_attributes[0] AND required_attributes[1] AND ...)
# AND
# (required_one_of_attributes[0][0] OR required_one_of_attributes[0][1] OR
# ...)
# AND
# (required_one_of_attributes[1][0] OR required_one_of_attributes[1][1] OR
# ...)
# ```
#
# Restricts the response to vehicles with the specified attributes. This
# field is a conjunction/AND operation. A max of 50 required_attributes is
# allowed. This matches the maximum number of attributes allowed on a
# vehicle. Each repeated string should be of the format "key:value".
# @!attribute [rw] required_one_of_attributes
# @return [::Array<::String>]
# Restricts the response to vehicles with at least one of the specified
# attributes in each `VehicleAttributeList`. Within each list, a vehicle must
# match at least one of the attributes. This field is an inclusive
# disjunction/OR operation in each `VehicleAttributeList` and a
# conjunction/AND operation across the collection of `VehicleAttributeList`.
# Each repeated string should be of the format
# "key1:value1|key2:value2|key3:value3".
# @!attribute [rw] required_one_of_attribute_sets
# @return [::Array<::String>]
# `required_one_of_attribute_sets` provides additional functionality.
#
# Similar to `required_one_of_attributes`, `required_one_of_attribute_sets`
# uses a message which allows a list of lists, allowing expressions such as
# this one:
#
# ```
# (required_attributes[0] AND required_attributes[1] AND ...)
# AND
# (
# (required_one_of_attribute_sets[0][0] AND
# required_one_of_attribute_sets[0][1] AND
# ...)
# OR
# (required_one_of_attribute_sets[1][0] AND
# required_one_of_attribute_sets[1][1] AND
# ...)
# )
# ```
#
# Restricts the response to vehicles that match all the attributes in a
# `VehicleAttributeList`. Within each list, a vehicle must match all of the
# attributes. This field is a conjunction/AND operation in each
# `VehicleAttributeList` and inclusive disjunction/OR operation across the
# collection of `VehicleAttributeList`. Each repeated string should be of the
# format "key1:value1|key2:value2|key3:value3".
# @!attribute [rw] vehicle_state
# @return [::Google::Maps::FleetEngine::V1::VehicleState]
# Restricts the response to vehicles that have this vehicle state.
# @!attribute [rw] on_trip_only
# @return [::Boolean]
# Only return the vehicles with current trip(s).
# @!attribute [rw] filter
# @return [::String]
# Optional. A filter query to apply when listing vehicles. See
# http://aip.dev/160 for examples of the filter syntax.
#
# This field is designed to replace the `required_attributes`,
# `required_one_of_attributes`, and `required_one_of_attributes_sets` fields.
# If a non-empty value is specified here, the following fields must be empty:
# `required_attributes`, `required_one_of_attributes`, and
# `required_one_of_attributes_sets`.
#
# This filter functions as an AND clause with other constraints,
# such as `vehicle_state` or `on_trip_only`.
#
# Note that the only queries supported are on vehicle attributes (for
# example, `attributes.<key> = <value>` or `attributes.<key1> = <value1> AND
# attributes.<key2> = <value2>`). The maximum number of restrictions allowed
# in a filter query is 50.
#
# Also, all attributes are stored as strings, so the only supported
# comparisons against attributes are string comparisons. In order to compare
# against number or boolean values, the values must be explicitly quoted to
# be treated as strings (for example, `attributes.<key> = "10"` or
# `attributes.<key> = "true"`).
# @!attribute [rw] viewport
# @return [::Google::Geo::Type::Viewport]
# Optional. A filter that limits the vehicles returned to those whose last
# known location was in the rectangular area defined by the viewport.
class ListVehiclesRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# `ListVehicles` response message.
# @!attribute [rw] vehicles
# @return [::Array<::Google::Maps::FleetEngine::V1::Vehicle>]
# Vehicles matching the criteria in the request.
# The maximum number of vehicles returned is determined by the `page_size`
# field in the request.
# @!attribute [rw] next_page_token
# @return [::String]
# Token to retrieve the next page of vehicles, or empty if there are no
# more vehicles that meet the request criteria.
# @!attribute [rw] total_size
# @return [::Integer]
# Required. Total number of vehicles matching the request criteria across all
# pages.
class ListVehiclesResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Describes intermediate points along a route for a `VehicleMatch` in a
# `SearchVehiclesResponse`. This concept is represented as a `TripWaypoint` in
# all other endpoints.
# @!attribute [rw] lat_lng
# @return [::Google::Type::LatLng]
# The location of this waypoint.
# @!attribute [rw] eta
# @return [::Google::Protobuf::Timestamp]
# The estimated time that the vehicle will arrive at this waypoint.
class Waypoint
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Contains the vehicle and related estimates for a vehicle that match the
# points of active trips for the vehicle `SearchVehiclesRequest`.
# @!attribute [rw] vehicle
# @return [::Google::Maps::FleetEngine::V1::Vehicle]
# Required. A vehicle that matches the request.
# @!attribute [rw] vehicle_pickup_eta
# @return [::Google::Protobuf::Timestamp]
# The vehicle's driving ETA to the pickup point specified in the
# request. An empty value indicates a failure in calculating ETA for the
# vehicle. If `SearchVehiclesRequest.include_back_to_back` was `true` and
# this vehicle has an active trip, `vehicle_pickup_eta` includes the time
# required to complete the current active trip.
# @!attribute [rw] vehicle_pickup_distance_meters
# @return [::Google::Protobuf::Int32Value]
# The distance from the Vehicle's current location to the pickup point
# specified in the request, including any intermediate pickup or dropoff
# points for existing trips. This distance comprises the calculated driving
# (route) distance, plus the straight line distance between the navigation
# end point and the requested pickup point. (The distance between the
# navigation end point and the requested pickup point is typically small.) An
# empty value indicates an error in calculating the distance.
# @!attribute [rw] vehicle_pickup_straight_line_distance_meters
# @return [::Google::Protobuf::Int32Value]
# Required. The straight-line distance between the vehicle and the pickup
# point specified in the request.
# @!attribute [rw] vehicle_dropoff_eta
# @return [::Google::Protobuf::Timestamp]
# The complete vehicle's driving ETA to the drop off point specified in the
# request. The ETA includes stopping at any waypoints before the
# `dropoff_point` specified in the request. The value will only be populated
# when a drop off point is specified in the request. An empty value indicates
# an error calculating the ETA.
# @!attribute [rw] vehicle_pickup_to_dropoff_distance_meters
# @return [::Google::Protobuf::Int32Value]
# The vehicle's driving distance (in meters) from the pickup point
# to the drop off point specified in the request. The distance is only
# between the two points and does not include the vehicle location or any
# other points that must be visited before the vehicle visits either the
# pickup point or dropoff point. The value will only be populated when a
# `dropoff_point` is specified in the request. An empty value indicates
# a failure in calculating the distance from the pickup to
# drop off point specified in the request.
# @!attribute [rw] trip_type
# @return [::Google::Maps::FleetEngine::V1::TripType]
# Required. The trip type of the request that was used to calculate the ETA
# to the pickup point.
# @!attribute [rw] vehicle_trips_waypoints
# @return [::Array<::Google::Maps::FleetEngine::V1::Waypoint>]
# The ordered list of waypoints used to calculate the ETA. The list
# includes vehicle location, the pickup points of active
# trips for the vehicle, and the pickup points provided in the
# request. An empty list indicates a failure in calculating ETA for the
# vehicle.
# @!attribute [rw] vehicle_match_type
# @return [::Google::Maps::FleetEngine::V1::VehicleMatch::VehicleMatchType]
# Type of the vehicle match.
# @!attribute [rw] requested_ordered_by
# @return [::Google::Maps::FleetEngine::V1::SearchVehiclesRequest::VehicleMatchOrder]
# The order requested for sorting vehicle matches. Equivalent to
# `ordered_by`.
# @!attribute [rw] ordered_by
# @return [::Google::Maps::FleetEngine::V1::SearchVehiclesRequest::VehicleMatchOrder]
# The order requested for sorting vehicle matches. Equivalent to
# `requested_ordered_by`.
class VehicleMatch
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
# Type of vehicle match.
module VehicleMatchType
# Unknown vehicle match type
UNKNOWN = 0
# The vehicle currently has no trip assigned to it and can proceed to the
# pickup point.
EXCLUSIVE = 1
# The vehicle is currently assigned to a trip, but can proceed to the
# pickup point after completing the in-progress trip. ETA and distance
# calculations take the existing trip into account.
BACK_TO_BACK = 2
# The vehicle has sufficient capacity for a shared ride.
CARPOOL = 3
# The vehicle will finish its current, active trip before proceeding to the
# pickup point. ETA and distance calculations take the existing trip into
# account.
CARPOOL_BACK_TO_BACK = 4
end
end
# A list-of-lists datatype for vehicle attributes.
# @!attribute [rw] attributes
# @return [::Array<::Google::Maps::FleetEngine::V1::VehicleAttribute>]
# A list of attributes in this collection.
class VehicleAttributeList
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
end
end
end
end