module Geocoder
  module Calculations
    extend self

    ##
    # Compass point names, listed clockwise starting at North.
    #
    # If you want bearings named using more, fewer, or different points
    # override Geocoder::Calculations.COMPASS_POINTS with your own array.
    #
    COMPASS_POINTS = %w[N NE E SE S SW W NW]

    ##
    # Radius of the Earth, in kilometers.
    # Value taken from: http://en.wikipedia.org/wiki/Earth_radius
    #
    EARTH_RADIUS = 6371.0

    ##
    # Conversion factor: multiply by kilometers to get miles.
    #
    KM_IN_MI = 0.621371192

    ##
    # Distance spanned by one degree of latitude in the given units.
    #
    def latitude_degree_distance(units = :mi)
      2 * Math::PI * earth_radius(units) / 360
    end

    ##
    # Distance spanned by one degree of longitude at the given latitude.
    # This ranges from around 69 miles at the equator to zero at the poles.
    #
    def longitude_degree_distance(latitude, units = :mi)
      latitude_degree_distance(units) * Math.cos(to_radians(latitude))
    end

    ##
    # Distance between two points on Earth (Haversine formula).
    # Takes two points and an options hash.
    # The points are given in the same way that points are given to all
    # Geocoder methods that accept points as arguments. They can be:
    #
    # * an array of coordinates ([lat,lon])
    # * a geocodable address (string)
    # * a geocoded object (one which implements a +to_coordinates+ method
    #   which returns a [lat,lon] array
    #
    # The options hash supports:
    #
    # * <tt>:units</tt> - <tt>:mi</tt> (default) or <tt>:km</tt>
    #
    def distance_between(point1, point2, options = {}, *args)
      if args.size > 0
        warn "DEPRECATION WARNING: Instead of passing lat1/lon1/lat2/lon2 as separate arguments to the distance_between method, please pass two two-element arrays: [#{point1},#{point2}], [#{options}, #{args.first}]. The old argument format will not be supported in Geocoder v.1.0."
        point1 = [point1, point2]
        point2 = [options, args.shift]
        options = args.shift || {}
      end

      # set default options
      options[:units] ||= :mi

      # convert to coordinate arrays
      point1 = extract_coordinates(point1)
      point2 = extract_coordinates(point2)

      # convert degrees to radians
      point1 = to_radians(point1)
      point2 = to_radians(point2)

      # compute deltas
      dlat = point2[0] - point1[0]
      dlon = point2[1] - point1[1]

      a = (Math.sin(dlat / 2))**2 + Math.cos(point1[0]) *
          (Math.sin(dlon / 2))**2 * Math.cos(point2[0])
      c = 2 * Math.atan2( Math.sqrt(a), Math.sqrt(1-a))
      c * earth_radius(options[:units])
    end

    ##
    # Bearing between two points on Earth.
    # Returns a number of degrees from due north (clockwise).
    #
    # See Geocoder::Calculations.distance_between for
    # ways of specifying the points. Also accepts an options hash:
    #
    # * <tt>:method</tt> - <tt>:linear</tt> (default) or <tt>:spherical</tt>;
    #   the spherical method is "correct" in that it returns the shortest path
    #   (one along a great circle) but the linear method is the default as it
    #   is less confusing (returns due east or west when given two points with
    #   the same latitude)
    #
    # Based on: http://www.movable-type.co.uk/scripts/latlong.html
    #
    def bearing_between(point1, point2, options = {}, *args)
      if args.size > 0
        warn "DEPRECATION WARNING: Instead of passing lat1/lon1/lat2/lon2 as separate arguments to the bearing_between method, please pass two two-element arrays: [#{point1},#{point2}], [#{options}, #{args.first}]. The old argument format will not be supported in Geocoder v.1.0."
        point1 = [point1, point2]
        point2 = [options, args.shift]
        options = args.shift || {}
      end

      options[:method] = :linear unless options[:method] == :spherical

      # convert to coordinate arrays
      point1 = extract_coordinates(point1)
      point2 = extract_coordinates(point2)

      # convert degrees to radians
      point1 = to_radians(point1)
      point2 = to_radians(point2)

      # compute deltas
      dlat = point2[0] - point1[0]
      dlon = point2[1] - point1[1]

      case options[:method]
      when :linear
        y = dlon
        x = dlat

      when :spherical
        y = Math.sin(dlon) * Math.cos(point2[0])
        x = Math.cos(point1[0]) * Math.sin(point2[0]) -
            Math.sin(point1[0]) * Math.cos(point2[0]) * Math.cos(dlon)
      end

      bearing = Math.atan2(x,y)
      # Answer is in radians counterclockwise from due east.
      # Convert to degrees clockwise from due north:
      (90 - to_degrees(bearing) + 360) % 360
    end

    ##
    # Translate a bearing (float) into a compass direction (string, eg "North").
    #
    def compass_point(bearing, points = COMPASS_POINTS)
      seg_size = 360 / points.size
      points[((bearing + (seg_size / 2)) % 360) / seg_size]
    end

    ##
    # Compute the geographic center (aka geographic midpoint, center of
    # gravity) for an array of geocoded objects and/or [lat,lon] arrays
    # (can be mixed). Any objects missing coordinates are ignored. Follows
    # the procedure documented at http://www.geomidpoint.com/calculation.html.
    #
    def geographic_center(points)

      # convert objects to [lat,lon] arrays and convert degrees to radians
      coords = points.map{ |p| to_radians(extract_coordinates(p)) }

      # convert to Cartesian coordinates
      x = []; y = []; z = []
      coords.each do |p|
        x << Math.cos(p[0]) * Math.cos(p[1])
        y << Math.cos(p[0]) * Math.sin(p[1])
        z << Math.sin(p[0])
      end

      # compute average coordinate values
      xa, ya, za = [x,y,z].map do |c|
        c.inject(0){ |tot,i| tot += i } / c.size.to_f
      end

      # convert back to latitude/longitude
      lon = Math.atan2(ya, xa)
      hyp = Math.sqrt(xa**2 + ya**2)
      lat = Math.atan2(za, hyp)

      # return answer in degrees
      to_degrees [lat, lon]
    end

    ##
    # Returns coordinates of the lower-left and upper-right corners of a box
    # with the given point at its center. The radius is the shortest distance
    # from the center point to any side of the box (the length of each side
    # is twice the radius).
    #
    # This is useful for finding corner points of a map viewport, or for
    # roughly limiting the possible solutions in a geo-spatial search
    # (ActiveRecord queries use it thusly).
    #
    # See Geocoder::Calculations.distance_between for
    # ways of specifying the point. Also accepts an options hash:
    #
    # * <tt>:units</tt> - <tt>:mi</tt> (default) or <tt>:km</tt>
    #
    def bounding_box(point, radius, options = {}, *args)
      if point.is_a?(Numeric)
        warn "DEPRECATION WARNING: Instead of passing latitude/longitude as separate arguments to the bounding_box method, please pass an array [#{point},#{radius}], a geocoded object, or a geocodable address (string). The old argument format will not be supported in Geocoder v.1.0."
        point   = [point, radius]
        radius  = options
        options = args.first || {}
      end
      lat,lon = extract_coordinates(point)
      radius  = radius.to_f
      units   = options[:units] || :mi
      [
        lat - (radius / latitude_degree_distance(units)),
        lon - (radius / longitude_degree_distance(lat, units)),
        lat + (radius / latitude_degree_distance(units)),
        lon + (radius / longitude_degree_distance(lat, units))
      ]
    end

    ##
    # Convert degrees to radians.
    # If an array (or multiple arguments) is passed,
    # converts each value and returns array.
    #
    def to_radians(*args)
      args = args.first if args.first.is_a?(Array)
      if args.size == 1
        args.first * (Math::PI / 180)
      else
        args.map{ |i| to_radians(i) }
      end
    end

    ##
    # Convert radians to degrees.
    # If an array (or multiple arguments) is passed,
    # converts each value and returns array.
    #
    def to_degrees(*args)
      args = args.first if args.first.is_a?(Array)
      if args.size == 1
        (args.first * 180.0) / Math::PI
      else
        args.map{ |i| to_degrees(i) }
      end
    end

    def distance_to_radians(distance, units = :mi)
      distance.to_f / earth_radius(units)
    end

    def radians_to_distance(radians, units = :mi)
      radians * earth_radius(units)
    end

    ##
    # Convert miles to kilometers.
    #
    def to_kilometers(mi)
      mi * mi_in_km
    end

    ##
    # Convert kilometers to miles.
    #
    def to_miles(km)
      km * km_in_mi
    end

    ##
    # Radius of the Earth in the given units (:mi or :km). Default is :mi.
    #
    def earth_radius(units = :mi)
      units == :km ? EARTH_RADIUS : to_miles(EARTH_RADIUS)
    end

    ##
    # Conversion factor: km to mi.
    #
    def km_in_mi
      KM_IN_MI
    end

    ##
    # Conversion factor: mi to km.
    #
    def mi_in_km
      1.0 / KM_IN_MI
    end

    ##
    # Takes an object which is a [lat,lon] array, a geocodable string,
    # or an object that implements +to_coordinates+ and returns a
    # [lat,lon] array. Note that if a string is passed this may be a slow-
    # running method and may return nil.
    #
    def extract_coordinates(point)
      case point
        when Array; point
        when String; Geocoder.coordinates(point)
        else point.to_coordinates
      end
    end
  end
end