# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Es
module V20180416
# 后备索引元数据字段
class BackingIndexMetaField < TencentCloud::Common::AbstractModel
# @param IndexName: 后备索引名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexName: String
# @param IndexStatus: 后备索引状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStatus: String
# @param IndexStorage: 后备索引存储大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStorage: Integer
# @param IndexPhrase: 后备索引当前生命周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexPhrase: String
# @param IndexCreateTime: 后备索引创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexCreateTime: String
attr_accessor :IndexName, :IndexStatus, :IndexStorage, :IndexPhrase, :IndexCreateTime
def initialize(indexname=nil, indexstatus=nil, indexstorage=nil, indexphrase=nil, indexcreatetime=nil)
@IndexName = indexname
@IndexStatus = indexstatus
@IndexStorage = indexstorage
@IndexPhrase = indexphrase
@IndexCreateTime = indexcreatetime
end
def deserialize(params)
@IndexName = params['IndexName']
@IndexStatus = params['IndexStatus']
@IndexStorage = params['IndexStorage']
@IndexPhrase = params['IndexPhrase']
@IndexCreateTime = params['IndexCreateTime']
end
end
# 集群维度视图数据
class ClusterView < TencentCloud::Common::AbstractModel
# @param Health: 集群健康状态
# @type Health: Float
# @param Visible: 集群是否可见
# @type Visible: Float
# @param Break: 集群是否熔断
# @type Break: Float
# @param AvgDiskUsage: 平均磁盘使用率
# @type AvgDiskUsage: Float
# @param AvgMemUsage: 平均内存使用率
# @type AvgMemUsage: Float
# @param AvgCpuUsage: 平均cpu使用率
# @type AvgCpuUsage: Float
# @param TotalDiskSize: 集群总存储大小
# @type TotalDiskSize: Integer
# @param TargetNodeTypes: 客户端请求节点
# @type TargetNodeTypes: Array
# @param NodeNum: 在线节点数
# @type NodeNum: Integer
# @param TotalNodeNum: 总节点数
# @type TotalNodeNum: Integer
# @param DataNodeNum: 数据节点数
# @type DataNodeNum: Integer
# @param IndexNum: 索引数
# @type IndexNum: Integer
# @param DocNum: 文档数
# @type DocNum: Integer
# @param DiskUsedInBytes: 磁盘已使用字节数
# @type DiskUsedInBytes: Integer
# @param ShardNum: 分片个数
# @type ShardNum: Integer
# @param PrimaryShardNum: 主分片个数
# @type PrimaryShardNum: Integer
# @param RelocatingShardNum: 迁移中的分片个数
# @type RelocatingShardNum: Integer
# @param InitializingShardNum: 初始化中的分片个数
# @type InitializingShardNum: Integer
# @param UnassignedShardNum: 未分配的分片个数
# @type UnassignedShardNum: Integer
# @param TotalCosStorage: 企业版COS存储容量大小，单位GB
# @type TotalCosStorage: Integer
# @param SearchableSnapshotCosBucket: 企业版集群可搜索快照cos存放的bucket名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SearchableSnapshotCosBucket: String
# @param SearchableSnapshotCosAppId: 企业版集群可搜索快照cos所属appid
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SearchableSnapshotCosAppId: String
attr_accessor :Health, :Visible, :Break, :AvgDiskUsage, :AvgMemUsage, :AvgCpuUsage, :TotalDiskSize, :TargetNodeTypes, :NodeNum, :TotalNodeNum, :DataNodeNum, :IndexNum, :DocNum, :DiskUsedInBytes, :ShardNum, :PrimaryShardNum, :RelocatingShardNum, :InitializingShardNum, :UnassignedShardNum, :TotalCosStorage, :SearchableSnapshotCosBucket, :SearchableSnapshotCosAppId
def initialize(health=nil, visible=nil, _break=nil, avgdiskusage=nil, avgmemusage=nil, avgcpuusage=nil, totaldisksize=nil, targetnodetypes=nil, nodenum=nil, totalnodenum=nil, datanodenum=nil, indexnum=nil, docnum=nil, diskusedinbytes=nil, shardnum=nil, primaryshardnum=nil, relocatingshardnum=nil, initializingshardnum=nil, unassignedshardnum=nil, totalcosstorage=nil, searchablesnapshotcosbucket=nil, searchablesnapshotcosappid=nil)
@Health = health
@Visible = visible
@Break = _break
@AvgDiskUsage = avgdiskusage
@AvgMemUsage = avgmemusage
@AvgCpuUsage = avgcpuusage
@TotalDiskSize = totaldisksize
@TargetNodeTypes = targetnodetypes
@NodeNum = nodenum
@TotalNodeNum = totalnodenum
@DataNodeNum = datanodenum
@IndexNum = indexnum
@DocNum = docnum
@DiskUsedInBytes = diskusedinbytes
@ShardNum = shardnum
@PrimaryShardNum = primaryshardnum
@RelocatingShardNum = relocatingshardnum
@InitializingShardNum = initializingshardnum
@UnassignedShardNum = unassignedshardnum
@TotalCosStorage = totalcosstorage
@SearchableSnapshotCosBucket = searchablesnapshotcosbucket
@SearchableSnapshotCosAppId = searchablesnapshotcosappid
end
def deserialize(params)
@Health = params['Health']
@Visible = params['Visible']
@Break = params['Break']
@AvgDiskUsage = params['AvgDiskUsage']
@AvgMemUsage = params['AvgMemUsage']
@AvgCpuUsage = params['AvgCpuUsage']
@TotalDiskSize = params['TotalDiskSize']
@TargetNodeTypes = params['TargetNodeTypes']
@NodeNum = params['NodeNum']
@TotalNodeNum = params['TotalNodeNum']
@DataNodeNum = params['DataNodeNum']
@IndexNum = params['IndexNum']
@DocNum = params['DocNum']
@DiskUsedInBytes = params['DiskUsedInBytes']
@ShardNum = params['ShardNum']
@PrimaryShardNum = params['PrimaryShardNum']
@RelocatingShardNum = params['RelocatingShardNum']
@InitializingShardNum = params['InitializingShardNum']
@UnassignedShardNum = params['UnassignedShardNum']
@TotalCosStorage = params['TotalCosStorage']
@SearchableSnapshotCosBucket = params['SearchableSnapshotCosBucket']
@SearchableSnapshotCosAppId = params['SearchableSnapshotCosAppId']
end
end
# ES cos自动备份信息
class CosBackup < TencentCloud::Common::AbstractModel
# @param IsAutoBackup: 是否开启cos自动备份
# @type IsAutoBackup: Boolean
# @param BackupTime: 自动备份执行时间（精确到小时）, e.g. "22:00"
# @type BackupTime: String
attr_accessor :IsAutoBackup, :BackupTime
def initialize(isautobackup=nil, backuptime=nil)
@IsAutoBackup = isautobackup
@BackupTime = backuptime
end
def deserialize(params)
@IsAutoBackup = params['IsAutoBackup']
@BackupTime = params['BackupTime']
end
end
# CreateIndex请求参数结构体
class CreateIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 创建的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 创建的索引名
# @type IndexName: String
# @param IndexMetaJson: 创建的索引元数据JSON，如mappings、settings
# @type IndexMetaJson: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
attr_accessor :InstanceId, :IndexType, :IndexName, :IndexMetaJson, :Username, :Password
def initialize(instanceid=nil, indextype=nil, indexname=nil, indexmetajson=nil, username=nil, password=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@IndexMetaJson = indexmetajson
@Username = username
@Password = password
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@IndexMetaJson = params['IndexMetaJson']
@Username = params['Username']
@Password = params['Password']
end
end
# CreateIndex返回参数结构体
class CreateIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateInstance请求参数结构体
class CreateInstanceRequest < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param EsVersion: 实例版本（支持"5.6.4"、"6.4.3"、"6.8.2"、"7.5.1"、"7.10.1"）
# @type EsVersion: String
# @param VpcId: 私有网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Password: 访问密码（密码需8到16位，至少包括两项（[a-z,A-Z],[0-9]和[-!@#$%&^*+=_:;,.?]的特殊符号）
# @type Password: String
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param NodeNum: 已废弃请使用NodeInfoList
# 节点数量（2-50个）
# @type NodeNum: Integer
# @param ChargeType: 计费类型PREPAID：预付费，即包年包月POSTPAID_BY_HOUR：按小时后付费默认值POSTPAID_BY_HOUR
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长（单位由参数TimeUnit决定）
# @type ChargePeriod: Integer
# @param RenewFlag: 自动续费标识RENEW_FLAG_AUTO：自动续费RENEW_FLAG_MANUAL：不自动续费，用户手动续费ChargeType为PREPAID时需要设置，如不传递该参数，普通用户默认不自动续费，SVIP用户自动续费
# @type RenewFlag: String
# @param NodeType: 已废弃请使用NodeInfoList
# 节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param DiskType: 已废弃请使用NodeInfoList
# 节点磁盘类型CLOUD_SSD：SSD云硬盘CLOUD_PREMIUM：高硬能云硬盘默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 已废弃请使用NodeInfoList
# 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param TimeUnit: 计费时长单位（ChargeType为PREPAID时需要设置，默认值为“m”，表示月，当前只支持“m”）
# @type TimeUnit: String
# @param AutoVoucher: 是否自动使用代金券0：不自动使用1：自动使用默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param EnableDedicatedMaster: 已废弃请使用NodeInfoList
# 是否创建专用主节点true：开启专用主节点false：不开启专用主节点默认值false
# @type EnableDedicatedMaster: Boolean
# @param MasterNodeNum: 已废弃请使用NodeInfoList
# 专用主节点个数（只支持3个和5个，EnableDedicatedMaster为true时该值必传）
# @type MasterNodeNum: Integer
# @param MasterNodeType: 已废弃请使用NodeInfoList
# 专用主节点类型（EnableDedicatedMaster为true时必传）ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type MasterNodeType: String
# @param MasterNodeDiskSize: 已废弃请使用NodeInfoList
# 专用主节点磁盘大小（单位GB，非必传，若传递则必须为50，暂不支持自定义）
# @type MasterNodeDiskSize: Integer
# @param ClusterNameInConf: 集群配置文件中的ClusterName（系统默认配置为实例ID，暂不支持自定义）
# @type ClusterNameInConf: String
# @param DeployMode: 集群部署方式0：单可用区部署1：多可用区部署默认为0
# @type DeployMode: Integer
# @param MultiZoneInfo: 多可用区部署时可用区的详细信息(DeployMode为1时必传)
# @type MultiZoneInfo: Array
# @param LicenseType: License类型oss：开源版basic：基础版platinum：白金版默认值platinum
# @type LicenseType: String
# @param NodeInfoList: 节点信息列表， 用于描述集群各类节点的规格信息如节点类型，节点个数，节点规格，磁盘类型，磁盘大小等
# @type NodeInfoList: Array
# @param TagList: 节点标签信息列表
# @type TagList: Array
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证1：不开启2：开启
# @type BasicSecurityType: Integer
# @param SceneType: 场景化模板类型 0：不启用 1：通用 2：日志 3：搜索
# @type SceneType: Integer
# @param WebNodeTypeInfo: 可视化节点配置
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param Protocol: 创建https集群，默认是http
# @type Protocol: String
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
attr_accessor :Zone, :EsVersion, :VpcId, :SubnetId, :Password, :InstanceName, :NodeNum, :ChargeType, :ChargePeriod, :RenewFlag, :NodeType, :DiskType, :DiskSize, :TimeUnit, :AutoVoucher, :VoucherIds, :EnableDedicatedMaster, :MasterNodeNum, :MasterNodeType, :MasterNodeDiskSize, :ClusterNameInConf, :DeployMode, :MultiZoneInfo, :LicenseType, :NodeInfoList, :TagList, :BasicSecurityType, :SceneType, :WebNodeTypeInfo, :Protocol, :OperationDuration
def initialize(zone=nil, esversion=nil, vpcid=nil, subnetid=nil, password=nil, instancename=nil, nodenum=nil, chargetype=nil, chargeperiod=nil, renewflag=nil, nodetype=nil, disktype=nil, disksize=nil, timeunit=nil, autovoucher=nil, voucherids=nil, enablededicatedmaster=nil, masternodenum=nil, masternodetype=nil, masternodedisksize=nil, clusternameinconf=nil, deploymode=nil, multizoneinfo=nil, licensetype=nil, nodeinfolist=nil, taglist=nil, basicsecuritytype=nil, scenetype=nil, webnodetypeinfo=nil, protocol=nil, operationduration=nil)
@Zone = zone
@EsVersion = esversion
@VpcId = vpcid
@SubnetId = subnetid
@Password = password
@InstanceName = instancename
@NodeNum = nodenum
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@RenewFlag = renewflag
@NodeType = nodetype
@DiskType = disktype
@DiskSize = disksize
@TimeUnit = timeunit
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@EnableDedicatedMaster = enablededicatedmaster
@MasterNodeNum = masternodenum
@MasterNodeType = masternodetype
@MasterNodeDiskSize = masternodedisksize
@ClusterNameInConf = clusternameinconf
@DeployMode = deploymode
@MultiZoneInfo = multizoneinfo
@LicenseType = licensetype
@NodeInfoList = nodeinfolist
@TagList = taglist
@BasicSecurityType = basicsecuritytype
@SceneType = scenetype
@WebNodeTypeInfo = webnodetypeinfo
@Protocol = protocol
@OperationDuration = operationduration
end
def deserialize(params)
@Zone = params['Zone']
@EsVersion = params['EsVersion']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Password = params['Password']
@InstanceName = params['InstanceName']
@NodeNum = params['NodeNum']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@TimeUnit = params['TimeUnit']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@EnableDedicatedMaster = params['EnableDedicatedMaster']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeType = params['MasterNodeType']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@ClusterNameInConf = params['ClusterNameInConf']
@DeployMode = params['DeployMode']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@LicenseType = params['LicenseType']
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@BasicSecurityType = params['BasicSecurityType']
@SceneType = params['SceneType']
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@Protocol = params['Protocol']
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
end
end
# CreateInstance返回参数结构体
class CreateInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :DealName, :RequestId
def initialize(instanceid=nil, dealname=nil, requestid=nil)
@InstanceId = instanceid
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# CreateLogstashInstance请求参数结构体
class CreateLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param Zone: 可用区
# @type Zone: String
# @param LogstashVersion: 实例版本（支持"6.8.13"、"7.10.1"）
# @type LogstashVersion: String
# @param VpcId: 私有网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param NodeNum: 节点数量（2-50个）
# @type NodeNum: Integer
# @param ChargeType: 计费类型PREPAID：预付费，即包年包月POSTPAID_BY_HOUR：按小时后付费默认值POSTPAID_BY_HOUR
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长（单位由参数TimeUnit决定）
# @type ChargePeriod: Integer
# @param TimeUnit: 计费时长单位（ChargeType为PREPAID时需要设置，默认值为“m”，表示月，当前只支持“m”）
# @type TimeUnit: String
# @param AutoVoucher: 是否自动使用代金券0：不自动使用1：自动使用默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param RenewFlag: 自动续费标识RENEW_FLAG_AUTO：自动续费RENEW_FLAG_MANUAL：不自动续费，用户手动续费ChargeType为PREPAID时需要设置，如不传递该参数，普通用户默认不自动续费，SVIP用户自动续费
# @type RenewFlag: String
# @param NodeType: 节点规格LOGSTASH.S1.SMALL2：1核2GLOGSTASH.S1.MEDIUM4：2核4GLOGSTASH.S1.MEDIUM8：2核8GLOGSTASH.S1.LARGE16：4核16GLOGSTASH.S1.2XLARGE32：8核32GLOGSTASH.S1.4XLARGE32：16核32GLOGSTASH.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param DiskType: 节点磁盘类型CLOUD_SSD：SSD云硬盘CLOUD_PREMIUM：高硬能云硬盘默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param LicenseType: License类型oss：开源版xpack：xpack版默认值xpack
# @type LicenseType: String
# @param TagList: 标签信息列表
# @type TagList: Array
attr_accessor :InstanceName, :Zone, :LogstashVersion, :VpcId, :SubnetId, :NodeNum, :ChargeType, :ChargePeriod, :TimeUnit, :AutoVoucher, :VoucherIds, :RenewFlag, :NodeType, :DiskType, :DiskSize, :LicenseType, :TagList
def initialize(instancename=nil, zone=nil, logstashversion=nil, vpcid=nil, subnetid=nil, nodenum=nil, chargetype=nil, chargeperiod=nil, timeunit=nil, autovoucher=nil, voucherids=nil, renewflag=nil, nodetype=nil, disktype=nil, disksize=nil, licensetype=nil, taglist=nil)
@InstanceName = instancename
@Zone = zone
@LogstashVersion = logstashversion
@VpcId = vpcid
@SubnetId = subnetid
@NodeNum = nodenum
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@TimeUnit = timeunit
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@RenewFlag = renewflag
@NodeType = nodetype
@DiskType = disktype
@DiskSize = disksize
@LicenseType = licensetype
@TagList = taglist
end
def deserialize(params)
@InstanceName = params['InstanceName']
@Zone = params['Zone']
@LogstashVersion = params['LogstashVersion']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@NodeNum = params['NodeNum']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@TimeUnit = params['TimeUnit']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@LicenseType = params['LicenseType']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
end
end
# CreateLogstashInstance返回参数结构体
class CreateLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :RequestId
def initialize(instanceid=nil, requestid=nil)
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# DeleteIndex请求参数结构体
class DeleteIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 删除的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 删除的索引名
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param BackingIndexName: 后备索引名
# @type BackingIndexName: String
attr_accessor :InstanceId, :IndexType, :IndexName, :Username, :Password, :BackingIndexName
def initialize(instanceid=nil, indextype=nil, indexname=nil, username=nil, password=nil, backingindexname=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@Username = username
@Password = password
@BackingIndexName = backingindexname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
@BackingIndexName = params['BackingIndexName']
end
end
# DeleteIndex返回参数结构体
class DeleteIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteInstance请求参数结构体
class DeleteInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DeleteInstance返回参数结构体
class DeleteInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteLogstashInstance请求参数结构体
class DeleteLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DeleteLogstashInstance返回参数结构体
class DeleteLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteLogstashPipelines请求参数结构体
class DeleteLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# DeleteLogstashPipelines返回参数结构体
class DeleteLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeIndexList请求参数结构体
class DescribeIndexListRequest < TencentCloud::Common::AbstractModel
# @param IndexType: 索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexName: 索引名，若填空则获取所有索引
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param Offset: 分页起始位置
# @type Offset: Integer
# @param Limit: 一页展示数量
# @type Limit: Integer
# @param OrderBy: 排序字段，支持索引名：IndexName、索引存储量：IndexStorage、索引创建时间：IndexCreateTime
# @type OrderBy: String
# @param IndexStatusList: 过滤索引状态
# @type IndexStatusList: Array
# @param Order: 排序顺序，支持asc、desc
# @type Order: String
attr_accessor :IndexType, :InstanceId, :IndexName, :Username, :Password, :Offset, :Limit, :OrderBy, :IndexStatusList, :Order
def initialize(indextype=nil, instanceid=nil, indexname=nil, username=nil, password=nil, offset=nil, limit=nil, orderby=nil, indexstatuslist=nil, order=nil)
@IndexType = indextype
@InstanceId = instanceid
@IndexName = indexname
@Username = username
@Password = password
@Offset = offset
@Limit = limit
@OrderBy = orderby
@IndexStatusList = indexstatuslist
@Order = order
end
def deserialize(params)
@IndexType = params['IndexType']
@InstanceId = params['InstanceId']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderBy = params['OrderBy']
@IndexStatusList = params['IndexStatusList']
@Order = params['Order']
end
end
# DescribeIndexList返回参数结构体
class DescribeIndexListResponse < TencentCloud::Common::AbstractModel
# @param IndexMetaFields: 索引元数据字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexMetaFields: Array
# @param TotalCount: 查询总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IndexMetaFields, :TotalCount, :RequestId
def initialize(indexmetafields=nil, totalcount=nil, requestid=nil)
@IndexMetaFields = indexmetafields
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['IndexMetaFields'].nil?
@IndexMetaFields = []
params['IndexMetaFields'].each do |i|
indexmetafield_tmp = IndexMetaField.new
indexmetafield_tmp.deserialize(i)
@IndexMetaFields << indexmetafield_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeIndexMeta请求参数结构体
class DescribeIndexMetaRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 索引名，若填空则获取所有索引
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
attr_accessor :InstanceId, :IndexType, :IndexName, :Username, :Password
def initialize(instanceid=nil, indextype=nil, indexname=nil, username=nil, password=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@Username = username
@Password = password
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
end
end
# DescribeIndexMeta返回参数结构体
class DescribeIndexMetaResponse < TencentCloud::Common::AbstractModel
# @param IndexMetaField: 索引元数据字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexMetaField: :class:`Tencentcloud::Es.v20180416.models.IndexMetaField`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IndexMetaField, :RequestId
def initialize(indexmetafield=nil, requestid=nil)
@IndexMetaField = indexmetafield
@RequestId = requestid
end
def deserialize(params)
unless params['IndexMetaField'].nil?
@IndexMetaField = IndexMetaField.new
@IndexMetaField.deserialize(params['IndexMetaField'])
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceLogs请求参数结构体
class DescribeInstanceLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param LogType: 日志类型，默认值为1
# 1, 主日志
# 2, 搜索慢日志
# 3, 索引慢日志
# 4, GC日志
# @type LogType: Integer
# @param SearchKey: 搜索词，支持LUCENE语法，如 level:WARN、ip:1.1.1.1、message:test-index等
# @type SearchKey: String
# @param StartTime: 日志开始时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type StartTime: String
# @param EndTime: 日志结束时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type EndTime: String
# @param Offset: 分页起始值, 默认值为0
# @type Offset: Integer
# @param Limit: 分页大小，默认值为100，最大值100
# @type Limit: Integer
# @param OrderByType: 时间排序方式，默认值为0
# 0, 降序
# 1, 升序
# @type OrderByType: Integer
attr_accessor :InstanceId, :LogType, :SearchKey, :StartTime, :EndTime, :Offset, :Limit, :OrderByType
def initialize(instanceid=nil, logtype=nil, searchkey=nil, starttime=nil, endtime=nil, offset=nil, limit=nil, orderbytype=nil)
@InstanceId = instanceid
@LogType = logtype
@SearchKey = searchkey
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogType = params['LogType']
@SearchKey = params['SearchKey']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByType = params['OrderByType']
end
end
# DescribeInstanceLogs返回参数结构体
class DescribeInstanceLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的日志条数
# @type TotalCount: Integer
# @param InstanceLogList: 日志详细信息列表
# @type InstanceLogList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceLogList, :RequestId
def initialize(totalcount=nil, instanceloglist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceLogList = instanceloglist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceLogList'].nil?
@InstanceLogList = []
params['InstanceLogList'].each do |i|
instancelog_tmp = InstanceLog.new
instancelog_tmp.deserialize(i)
@InstanceLogList << instancelog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceOperations请求参数结构体
class DescribeInstanceOperationsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param StartTime: 起始时间, e.g. "2019-03-07 16:30:39"
# @type StartTime: String
# @param EndTime: 结束时间, e.g. "2019-03-30 20:18:03"
# @type EndTime: String
# @param Offset: 分页起始值
# @type Offset: Integer
# @param Limit: 分页大小
# @type Limit: Integer
attr_accessor :InstanceId, :StartTime, :EndTime, :Offset, :Limit
def initialize(instanceid=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeInstanceOperations返回参数结构体
class DescribeInstanceOperationsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 操作记录总数
# @type TotalCount: Integer
# @param Operations: 操作记录
# @type Operations: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Operations, :RequestId
def initialize(totalcount=nil, operations=nil, requestid=nil)
@TotalCount = totalcount
@Operations = operations
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Operations'].nil?
@Operations = []
params['Operations'].each do |i|
operation_tmp = Operation.new
operation_tmp.deserialize(i)
@Operations << operation_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstances请求参数结构体
class DescribeInstancesRequest < TencentCloud::Common::AbstractModel
# @param Zone: 集群实例所属可用区，不传则默认所有可用区
# @type Zone: String
# @param InstanceIds: 集群实例ID列表
# @type InstanceIds: Array
# @param InstanceNames: 集群实例名称列表
# @type InstanceNames: Array
# @param Offset: 分页起始值, 默认值0
# @type Offset: Integer
# @param Limit: 分页大小，默认值20
# @type Limit: Integer
# @param OrderByKey: 排序字段1：实例ID2：实例名称3：可用区4：创建时间若orderKey未传递则按创建时间降序排序
# @type OrderByKey: Integer
# @param OrderByType: 排序方式0：升序1：降序若传递了orderByKey未传递orderByType, 则默认升序
# @type OrderByType: Integer
# @param TagList: 节点标签信息列表
# @type TagList: Array
# @param IpList: 私有网络vip列表
# @type IpList: Array
# @param ZoneList: 可用区列表
# @type ZoneList: Array
# @param HealthStatus: 健康状态筛列表
# @type HealthStatus: Array
# @param VpcIds: Vpc列表 筛选项
# @type VpcIds: Array
attr_accessor :Zone, :InstanceIds, :InstanceNames, :Offset, :Limit, :OrderByKey, :OrderByType, :TagList, :IpList, :ZoneList, :HealthStatus, :VpcIds
def initialize(zone=nil, instanceids=nil, instancenames=nil, offset=nil, limit=nil, orderbykey=nil, orderbytype=nil, taglist=nil, iplist=nil, zonelist=nil, healthstatus=nil, vpcids=nil)
@Zone = zone
@InstanceIds = instanceids
@InstanceNames = instancenames
@Offset = offset
@Limit = limit
@OrderByKey = orderbykey
@OrderByType = orderbytype
@TagList = taglist
@IpList = iplist
@ZoneList = zonelist
@HealthStatus = healthstatus
@VpcIds = vpcids
end
def deserialize(params)
@Zone = params['Zone']
@InstanceIds = params['InstanceIds']
@InstanceNames = params['InstanceNames']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByKey = params['OrderByKey']
@OrderByType = params['OrderByType']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@IpList = params['IpList']
@ZoneList = params['ZoneList']
@HealthStatus = params['HealthStatus']
@VpcIds = params['VpcIds']
end
end
# DescribeInstances返回参数结构体
class DescribeInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例个数
# @type TotalCount: Integer
# @param InstanceList: 实例详细信息列表
# @type InstanceList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceList, :RequestId
def initialize(totalcount=nil, instancelist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceList = instancelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceList'].nil?
@InstanceList = []
params['InstanceList'].each do |i|
instanceinfo_tmp = InstanceInfo.new
instanceinfo_tmp.deserialize(i)
@InstanceList << instanceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstanceLogs请求参数结构体
class DescribeLogstashInstanceLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param LogType: 日志类型，默认值为1
# 1, 主日志
# 2, 慢日志
# 3, GC日志
# @type LogType: Integer
# @param SearchKey: 搜索词，支持LUCENE语法，如 level:WARN、ip:1.1.1.1、message:test-index等
# @type SearchKey: String
# @param StartTime: 日志开始时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type StartTime: String
# @param EndTime: 日志结束时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type EndTime: String
# @param Offset: 分页起始值, 默认值为0
# @type Offset: Integer
# @param Limit: 分页大小，默认值为100，最大值100
# @type Limit: Integer
# @param OrderByType: 时间排序方式，默认值为0
# 0, 降序
# 1, 升序
# @type OrderByType: Integer
attr_accessor :InstanceId, :LogType, :SearchKey, :StartTime, :EndTime, :Offset, :Limit, :OrderByType
def initialize(instanceid=nil, logtype=nil, searchkey=nil, starttime=nil, endtime=nil, offset=nil, limit=nil, orderbytype=nil)
@InstanceId = instanceid
@LogType = logtype
@SearchKey = searchkey
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogType = params['LogType']
@SearchKey = params['SearchKey']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByType = params['OrderByType']
end
end
# DescribeLogstashInstanceLogs返回参数结构体
class DescribeLogstashInstanceLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的日志条数
# @type TotalCount: Integer
# @param InstanceLogList: 日志详细信息列表
# @type InstanceLogList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceLogList, :RequestId
def initialize(totalcount=nil, instanceloglist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceLogList = instanceloglist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceLogList'].nil?
@InstanceLogList = []
params['InstanceLogList'].each do |i|
instancelog_tmp = InstanceLog.new
instancelog_tmp.deserialize(i)
@InstanceLogList << instancelog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstanceOperations请求参数结构体
class DescribeLogstashInstanceOperationsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 起始时间, e.g. "2019-03-07 16:30:39"
# @type StartTime: String
# @param EndTime: 结束时间, e.g. "2019-03-30 20:18:03"
# @type EndTime: String
# @param Offset: 分页起始值
# @type Offset: Integer
# @param Limit: 分页大小
# @type Limit: Integer
attr_accessor :InstanceId, :StartTime, :EndTime, :Offset, :Limit
def initialize(instanceid=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeLogstashInstanceOperations返回参数结构体
class DescribeLogstashInstanceOperationsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 操作记录总数
# @type TotalCount: Integer
# @param Operations: 操作记录
# @type Operations: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Operations, :RequestId
def initialize(totalcount=nil, operations=nil, requestid=nil)
@TotalCount = totalcount
@Operations = operations
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Operations'].nil?
@Operations = []
params['Operations'].each do |i|
operation_tmp = Operation.new
operation_tmp.deserialize(i)
@Operations << operation_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstances请求参数结构体
class DescribeLogstashInstancesRequest < TencentCloud::Common::AbstractModel
# @param Zone: 实例所属可用区，不传则默认所有可用区
# @type Zone: String
# @param InstanceIds: 实例ID列表
# @type InstanceIds: Array
# @param InstanceNames: 实例名称列表
# @type InstanceNames: Array
# @param Offset: 分页起始值, 默认值0
# @type Offset: Integer
# @param Limit: 分页大小，默认值20
# @type Limit: Integer
# @param OrderByKey: 排序字段1：实例ID2：实例名称3：可用区4：创建时间若orderKey未传递则按创建时间降序排序
# @type OrderByKey: Integer
# @param OrderByType: 排序方式0：升序1：降序若传递了orderByKey未传递orderByType, 则默认升序
# @type OrderByType: Integer
# @param VpcIds: VpcId 筛选项
# @type VpcIds: Array
attr_accessor :Zone, :InstanceIds, :InstanceNames, :Offset, :Limit, :OrderByKey, :OrderByType, :VpcIds
def initialize(zone=nil, instanceids=nil, instancenames=nil, offset=nil, limit=nil, orderbykey=nil, orderbytype=nil, vpcids=nil)
@Zone = zone
@InstanceIds = instanceids
@InstanceNames = instancenames
@Offset = offset
@Limit = limit
@OrderByKey = orderbykey
@OrderByType = orderbytype
@VpcIds = vpcids
end
def deserialize(params)
@Zone = params['Zone']
@InstanceIds = params['InstanceIds']
@InstanceNames = params['InstanceNames']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByKey = params['OrderByKey']
@OrderByType = params['OrderByType']
@VpcIds = params['VpcIds']
end
end
# DescribeLogstashInstances返回参数结构体
class DescribeLogstashInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例个数
# @type TotalCount: Integer
# @param InstanceList: 实例详细信息列表
# @type InstanceList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceList, :RequestId
def initialize(totalcount=nil, instancelist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceList = instancelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceList'].nil?
@InstanceList = []
params['InstanceList'].each do |i|
logstashinstanceinfo_tmp = LogstashInstanceInfo.new
logstashinstanceinfo_tmp.deserialize(i)
@InstanceList << logstashinstanceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashPipelines请求参数结构体
class DescribeLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeLogstashPipelines返回参数结构体
class DescribeLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 管道总数
# @type TotalCount: Integer
# @param LogstashPipelineList: 管道列表
# @type LogstashPipelineList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :LogstashPipelineList, :RequestId
def initialize(totalcount=nil, logstashpipelinelist=nil, requestid=nil)
@TotalCount = totalcount
@LogstashPipelineList = logstashpipelinelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['LogstashPipelineList'].nil?
@LogstashPipelineList = []
params['LogstashPipelineList'].each do |i|
logstashpipelineinfo_tmp = LogstashPipelineInfo.new
logstashpipelineinfo_tmp.deserialize(i)
@LogstashPipelineList << logstashpipelineinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeViews请求参数结构体
class DescribeViewsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeViews返回参数结构体
class DescribeViewsResponse < TencentCloud::Common::AbstractModel
# @param ClusterView: 集群维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterView: :class:`Tencentcloud::Es.v20180416.models.ClusterView`
# @param NodesView: 节点维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodesView: Array
# @param KibanasView: Kibana维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanasView: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterView, :NodesView, :KibanasView, :RequestId
def initialize(clusterview=nil, nodesview=nil, kibanasview=nil, requestid=nil)
@ClusterView = clusterview
@NodesView = nodesview
@KibanasView = kibanasview
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterView'].nil?
@ClusterView = ClusterView.new
@ClusterView.deserialize(params['ClusterView'])
end
unless params['NodesView'].nil?
@NodesView = []
params['NodesView'].each do |i|
nodeview_tmp = NodeView.new
nodeview_tmp.deserialize(i)
@NodesView << nodeview_tmp
end
end
unless params['KibanasView'].nil?
@KibanasView = []
params['KibanasView'].each do |i|
kibanaview_tmp = KibanaView.new
kibanaview_tmp.deserialize(i)
@KibanasView << kibanaview_tmp
end
end
@RequestId = params['RequestId']
end
end
# DiagnoseInstance请求参数结构体
class DiagnoseInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param DiagnoseJobs: 需要触发的诊断项
# @type DiagnoseJobs: Array
# @param DiagnoseIndices: 需要诊断的索引，支持通配符
# @type DiagnoseIndices: String
attr_accessor :InstanceId, :DiagnoseJobs, :DiagnoseIndices
def initialize(instanceid=nil, diagnosejobs=nil, diagnoseindices=nil)
@InstanceId = instanceid
@DiagnoseJobs = diagnosejobs
@DiagnoseIndices = diagnoseindices
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DiagnoseJobs = params['DiagnoseJobs']
@DiagnoseIndices = params['DiagnoseIndices']
end
end
# DiagnoseInstance返回参数结构体
class DiagnoseInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ik插件词典信息
class DictInfo < TencentCloud::Common::AbstractModel
# @param Key: 词典键值
# @type Key: String
# @param Name: 词典名称
# @type Name: String
# @param Size: 词典大小，单位B
# @type Size: Integer
attr_accessor :Key, :Name, :Size
def initialize(key=nil, name=nil, size=nil)
@Key = key
@Name = name
@Size = size
end
def deserialize(params)
@Key = params['Key']
@Name = params['Name']
@Size = params['Size']
end
end
# ES集群配置项
class EsAcl < TencentCloud::Common::AbstractModel
# @param BlackIpList: kibana访问黑名单
# @type BlackIpList: Array
# @param WhiteIpList: kibana访问白名单
# @type WhiteIpList: Array
attr_accessor :BlackIpList, :WhiteIpList
def initialize(blackiplist=nil, whiteiplist=nil)
@BlackIpList = blackiplist
@WhiteIpList = whiteiplist
end
def deserialize(params)
@BlackIpList = params['BlackIpList']
@WhiteIpList = params['WhiteIpList']
end
end
# 配置组信息
class EsConfigSetInfo < TencentCloud::Common::AbstractModel
# @param Type: 配置组类型，如ldap,ad等
# @type Type: String
# @param EsConfig: "{\"order\":0,\"url\":\"ldap://10.0.1.72:389\",\"bind_dn\":\"cn=admin,dc=tencent,dc=com\",\"user_search.base_dn\":\"dc=tencent,dc=com\",\"user_search.filter\":\"(cn={0})\",\"group_search.base_dn\":\"dc=tencent,dc=com\"}"
# @type EsConfig: String
attr_accessor :Type, :EsConfig
def initialize(type=nil, esconfig=nil)
@Type = type
@EsConfig = esconfig
end
def deserialize(params)
@Type = params['Type']
@EsConfig = params['EsConfig']
end
end
# ES 词库信息
class EsDictionaryInfo < TencentCloud::Common::AbstractModel
# @param MainDict: 启用词词典列表
# @type MainDict: Array
# @param Stopwords: 停用词词典列表
# @type Stopwords: Array
# @param QQDict: QQ分词词典列表
# @type QQDict: Array
# @param Synonym: 同义词词典列表
# @type Synonym: Array
# @param UpdateType: 更新词典类型
# @type UpdateType: String
attr_accessor :MainDict, :Stopwords, :QQDict, :Synonym, :UpdateType
def initialize(maindict=nil, stopwords=nil, qqdict=nil, synonym=nil, updatetype=nil)
@MainDict = maindict
@Stopwords = stopwords
@QQDict = qqdict
@Synonym = synonym
@UpdateType = updatetype
end
def deserialize(params)
unless params['MainDict'].nil?
@MainDict = []
params['MainDict'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@MainDict << dictinfo_tmp
end
end
unless params['Stopwords'].nil?
@Stopwords = []
params['Stopwords'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@Stopwords << dictinfo_tmp
end
end
unless params['QQDict'].nil?
@QQDict = []
params['QQDict'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@QQDict << dictinfo_tmp
end
end
unless params['Synonym'].nil?
@Synonym = []
params['Synonym'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@Synonym << dictinfo_tmp
end
end
@UpdateType = params['UpdateType']
end
end
# ES公网访问访问控制信息
class EsPublicAcl < TencentCloud::Common::AbstractModel
# @param BlackIpList: 访问黑名单
# @type BlackIpList: Array
# @param WhiteIpList: 访问白名单
# @type WhiteIpList: Array
attr_accessor :BlackIpList, :WhiteIpList
def initialize(blackiplist=nil, whiteiplist=nil)
@BlackIpList = blackiplist
@WhiteIpList = whiteiplist
end
def deserialize(params)
@BlackIpList = params['BlackIpList']
@WhiteIpList = params['WhiteIpList']
end
end
# GetRequestTargetNodeTypes请求参数结构体
class GetRequestTargetNodeTypesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# GetRequestTargetNodeTypes返回参数结构体
class GetRequestTargetNodeTypesResponse < TencentCloud::Common::AbstractModel
# @param TargetNodeTypes: 接收请求的目标节点类型列表
# @type TargetNodeTypes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TargetNodeTypes, :RequestId
def initialize(targetnodetypes=nil, requestid=nil)
@TargetNodeTypes = targetnodetypes
@RequestId = requestid
end
def deserialize(params)
@TargetNodeTypes = params['TargetNodeTypes']
@RequestId = params['RequestId']
end
end
# 索引元数据字段
class IndexMetaField < TencentCloud::Common::AbstractModel
# @param IndexType: 索引类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexType: String
# @param IndexName: 索引名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexName: String
# @param IndexStatus: 索引状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStatus: String
# @param IndexStorage: 索引存储大小，单位Byte
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStorage: Integer
# @param IndexCreateTime: 索引创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexCreateTime: String
# @param BackingIndices: 后备索引
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackingIndices: Array
# @param ClusterId: 索引所属集群ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
# @param ClusterName: 索引所属集群名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterName: String
# @param ClusterVersion: 索引所属集群版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterVersion: String
# @param IndexPolicyField: 索引生命周期字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexPolicyField: :class:`Tencentcloud::Es.v20180416.models.IndexPolicyField`
# @param IndexOptionsField: 索引自治字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexOptionsField: :class:`Tencentcloud::Es.v20180416.models.IndexOptionsField`
# @param IndexSettingsField: 索引配置字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexSettingsField: :class:`Tencentcloud::Es.v20180416.models.IndexSettingsField`
# @param AppId: 索引所属集群APP ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppId: Integer
attr_accessor :IndexType, :IndexName, :IndexStatus, :IndexStorage, :IndexCreateTime, :BackingIndices, :ClusterId, :ClusterName, :ClusterVersion, :IndexPolicyField, :IndexOptionsField, :IndexSettingsField, :AppId
def initialize(indextype=nil, indexname=nil, indexstatus=nil, indexstorage=nil, indexcreatetime=nil, backingindices=nil, clusterid=nil, clustername=nil, clusterversion=nil, indexpolicyfield=nil, indexoptionsfield=nil, indexsettingsfield=nil, appid=nil)
@IndexType = indextype
@IndexName = indexname
@IndexStatus = indexstatus
@IndexStorage = indexstorage
@IndexCreateTime = indexcreatetime
@BackingIndices = backingindices
@ClusterId = clusterid
@ClusterName = clustername
@ClusterVersion = clusterversion
@IndexPolicyField = indexpolicyfield
@IndexOptionsField = indexoptionsfield
@IndexSettingsField = indexsettingsfield
@AppId = appid
end
def deserialize(params)
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@IndexStatus = params['IndexStatus']
@IndexStorage = params['IndexStorage']
@IndexCreateTime = params['IndexCreateTime']
unless params['BackingIndices'].nil?
@BackingIndices = []
params['BackingIndices'].each do |i|
backingindexmetafield_tmp = BackingIndexMetaField.new
backingindexmetafield_tmp.deserialize(i)
@BackingIndices << backingindexmetafield_tmp
end
end
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterVersion = params['ClusterVersion']
unless params['IndexPolicyField'].nil?
@IndexPolicyField = IndexPolicyField.new
@IndexPolicyField.deserialize(params['IndexPolicyField'])
end
unless params['IndexOptionsField'].nil?
@IndexOptionsField = IndexOptionsField.new
@IndexOptionsField.deserialize(params['IndexOptionsField'])
end
unless params['IndexSettingsField'].nil?
@IndexSettingsField = IndexSettingsField.new
@IndexSettingsField.deserialize(params['IndexSettingsField'])
end
@AppId = params['AppId']
end
end
# 索引自治字段
class IndexOptionsField < TencentCloud::Common::AbstractModel
# @param ExpireMaxAge: 过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireMaxAge: String
# @param ExpireMaxSize: 过期大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireMaxSize: String
# @param RolloverMaxAge: 滚动周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RolloverMaxAge: String
# @param RolloverDynamic: 是否开启动态滚动
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RolloverDynamic: String
# @param ShardNumDynamic: 是否开启动态分片
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ShardNumDynamic: String
# @param TimestampField: 时间分区字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimestampField: String
# @param WriteMode: 写入模式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WriteMode: String
attr_accessor :ExpireMaxAge, :ExpireMaxSize, :RolloverMaxAge, :RolloverDynamic, :ShardNumDynamic, :TimestampField, :WriteMode
def initialize(expiremaxage=nil, expiremaxsize=nil, rollovermaxage=nil, rolloverdynamic=nil, shardnumdynamic=nil, timestampfield=nil, writemode=nil)
@ExpireMaxAge = expiremaxage
@ExpireMaxSize = expiremaxsize
@RolloverMaxAge = rollovermaxage
@RolloverDynamic = rolloverdynamic
@ShardNumDynamic = shardnumdynamic
@TimestampField = timestampfield
@WriteMode = writemode
end
def deserialize(params)
@ExpireMaxAge = params['ExpireMaxAge']
@ExpireMaxSize = params['ExpireMaxSize']
@RolloverMaxAge = params['RolloverMaxAge']
@RolloverDynamic = params['RolloverDynamic']
@ShardNumDynamic = params['ShardNumDynamic']
@TimestampField = params['TimestampField']
@WriteMode = params['WriteMode']
end
end
# 索引生命周期字段
class IndexPolicyField < TencentCloud::Common::AbstractModel
# @param WarmEnable: 是否开启warm阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmEnable: String
# @param WarmMinAge: warm阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmMinAge: String
# @param ColdEnable: 是否开启cold阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdEnable: String
# @param ColdMinAge: cold阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdMinAge: String
# @param FrozenEnable: 是否开启frozen阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenEnable: String
# @param FrozenMinAge: frozen阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenMinAge: String
attr_accessor :WarmEnable, :WarmMinAge, :ColdEnable, :ColdMinAge, :FrozenEnable, :FrozenMinAge
def initialize(warmenable=nil, warmminage=nil, coldenable=nil, coldminage=nil, frozenenable=nil, frozenminage=nil)
@WarmEnable = warmenable
@WarmMinAge = warmminage
@ColdEnable = coldenable
@ColdMinAge = coldminage
@FrozenEnable = frozenenable
@FrozenMinAge = frozenminage
end
def deserialize(params)
@WarmEnable = params['WarmEnable']
@WarmMinAge = params['WarmMinAge']
@ColdEnable = params['ColdEnable']
@ColdMinAge = params['ColdMinAge']
@FrozenEnable = params['FrozenEnable']
@FrozenMinAge = params['FrozenMinAge']
end
end
# 索引配置字段
class IndexSettingsField < TencentCloud::Common::AbstractModel
# @param NumberOfShards: 索引主分片数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NumberOfShards: String
# @param NumberOfReplicas: 索引副本分片数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NumberOfReplicas: String
# @param RefreshInterval: 索引刷新频率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RefreshInterval: String
attr_accessor :NumberOfShards, :NumberOfReplicas, :RefreshInterval
def initialize(numberofshards=nil, numberofreplicas=nil, refreshinterval=nil)
@NumberOfShards = numberofshards
@NumberOfReplicas = numberofreplicas
@RefreshInterval = refreshinterval
end
def deserialize(params)
@NumberOfShards = params['NumberOfShards']
@NumberOfReplicas = params['NumberOfReplicas']
@RefreshInterval = params['RefreshInterval']
end
end
# 实例详细信息
class InstanceInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param AppId: 用户ID
# @type AppId: Integer
# @param Uin: 用户UIN
# @type Uin: String
# @param VpcUid: 实例所属VPC的UID
# @type VpcUid: String
# @param SubnetUid: 实例所属子网的UID
# @type SubnetUid: String
# @param Status: 实例状态，0:处理中,1:正常,-1停止,-2:销毁中,-3:已销毁
# @type Status: Integer
# @param RenewFlag: 自动续费标识。取值范围：
# RENEW_FLAG_AUTO：自动续费
# RENEW_FLAG_MANUAL：不自动续费
# 默认取值：
# RENEW_FLAG_DEFAULT：不自动续费
# 若该参数指定为 RENEW_FLAG_AUTO，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
# @param ChargeType: 实例计费模式。取值范围： PREPAID：表示预付费，即包年包月 POSTPAID_BY_HOUR：表示后付费，即按量计费 CDHPAID：CDH付费，即只对CDH计费，不对CDH上的实例计费。
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长,单位:月
# @type ChargePeriod: Integer
# @param NodeType: 节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param NodeNum: 节点个数
# @type NodeNum: Integer
# @param CpuNum: 节点CPU核数
# @type CpuNum: Integer
# @param MemSize: 节点内存大小，单位GB
# @type MemSize: Integer
# @param DiskType: 节点磁盘类型
# @type DiskType: String
# @param DiskSize: 节点磁盘大小，单位GB
# @type DiskSize: Integer
# @param EsDomain: ES域名
# @type EsDomain: String
# @param EsVip: ES VIP
# @type EsVip: String
# @param EsPort: ES端口
# @type EsPort: Integer
# @param KibanaUrl: Kibana访问url
# @type KibanaUrl: String
# @param EsVersion: ES版本号
# @type EsVersion: String
# @param EsConfig: ES配置项
# @type EsConfig: String
# @param EsAcl: Kibana访问控制配置
# @type EsAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param CreateTime: 实例创建时间
# @type CreateTime: String
# @param UpdateTime: 实例最后修改操作时间
# @type UpdateTime: String
# @param Deadline: 实例到期时间
# @type Deadline: String
# @param InstanceType: 实例类型（实例类型标识，当前只有1,2两种）
# @type InstanceType: Integer
# @param IkConfig: Ik分词器配置
# @type IkConfig: :class:`Tencentcloud::Es.v20180416.models.EsDictionaryInfo`
# @param MasterNodeInfo: 专用主节点配置
# @type MasterNodeInfo: :class:`Tencentcloud::Es.v20180416.models.MasterNodeInfo`
# @param CosBackup: cos自动备份配置
# @type CosBackup: :class:`Tencentcloud::Es.v20180416.models.CosBackup`
# @param AllowCosBackup: 是否允许cos自动备份
# @type AllowCosBackup: Boolean
# @param TagList: 实例拥有的标签列表
# @type TagList: Array
# @param LicenseType: License类型oss：开源版basic：基础版platinum：白金版默认值platinum
# @type LicenseType: String
# @param EnableHotWarmMode: 是否为冷热集群true: 冷热集群false: 非冷热集群
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableHotWarmMode: Boolean
# @param WarmNodeType: 温节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmNodeType: String
# @param WarmNodeNum: 温节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmNodeNum: Integer
# @param WarmCpuNum: 温节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmCpuNum: Integer
# @param WarmMemSize: 温节点内存内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmMemSize: Integer
# @param WarmDiskType: 温节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmDiskType: String
# @param WarmDiskSize: 温节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmDiskSize: Integer
# @param NodeInfoList: 集群节点信息列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodeInfoList: Array
# @param EsPublicUrl: Es公网地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPublicUrl: String
# @param MultiZoneInfo: 多可用区网络信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MultiZoneInfo: Array
# @param DeployMode: 部署模式0：单可用区1：多可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeployMode: Integer
# @param PublicAccess: ES公网访问状态OPEN：开启CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicAccess: String
# @param EsPublicAcl: ES公网访问控制配置
# @type EsPublicAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param KibanaPrivateUrl: Kibana内网地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPrivateUrl: String
# @param KibanaPublicAccess: Kibana公网访问状态OPEN：开启CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPublicAccess: String
# @param KibanaPrivateAccess: Kibana内网访问状态OPEN：开启CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPrivateAccess: String
# @param SecurityType: 6.8（及以上版本）基础版是否开启xpack security认证1：不开启2：开启
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityType: Integer
# @param SceneType: 场景化模板类型：0、不开启；1、通用场景；2、日志场景；3、搜索场景
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SceneType: Integer
# @param KibanaConfig: Kibana配置项
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaConfig: String
# @param KibanaNodeInfo: Kibana节点信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaNodeInfo: :class:`Tencentcloud::Es.v20180416.models.KibanaNodeInfo`
# @param WebNodeTypeInfo: 可视化节点配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param Jdk: JDK类型，oracle或kona
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Jdk: String
# @param Protocol: 集群网络通讯协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Protocol: String
# @param SecurityGroups: 安全组id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityGroups: Array
# @param ColdNodeType: 冷节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdNodeType: String
# @param ColdNodeNum: 冷节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdNodeNum: Integer
# @param ColdCpuNum: 冷节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdCpuNum: Integer
# @param ColdMemSize: 冷节点内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdMemSize: Integer
# @param ColdDiskType: 冷节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdDiskType: String
# @param ColdDiskSize: 冷节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdDiskSize: Integer
# @param FrozenNodeType: 冻节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenNodeType: String
# @param FrozenNodeNum: 冻节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenNodeNum: Integer
# @param FrozenCpuNum: 冻节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenCpuNum: Integer
# @param FrozenMemSize: 冻节点内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenMemSize: Integer
# @param FrozenDiskType: 冻节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenDiskType: String
# @param FrozenDiskSize: 冻节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenDiskSize: Integer
# @param HealthStatus: 集群健康状态 -1 未知；0 Green; 1 Yellow; 2 Red
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HealthStatus: Integer
# @param EsPrivateUrl: https集群内网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPrivateUrl: String
# @param EsPrivateDomain: https集群内网域名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPrivateDomain: String
# @param EsConfigSets: 集群的配置组信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsConfigSets: Array
# @param OperationDuration: 集群可维护时间段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
# @param OptionalWebServiceInfos: web节点列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OptionalWebServiceInfos: Array
# @param AutoIndexEnabled: 自治索引开关
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoIndexEnabled: Boolean
attr_accessor :InstanceId, :InstanceName, :Region, :Zone, :AppId, :Uin, :VpcUid, :SubnetUid, :Status, :RenewFlag, :ChargeType, :ChargePeriod, :NodeType, :NodeNum, :CpuNum, :MemSize, :DiskType, :DiskSize, :EsDomain, :EsVip, :EsPort, :KibanaUrl, :EsVersion, :EsConfig, :EsAcl, :CreateTime, :UpdateTime, :Deadline, :InstanceType, :IkConfig, :MasterNodeInfo, :CosBackup, :AllowCosBackup, :TagList, :LicenseType, :EnableHotWarmMode, :WarmNodeType, :WarmNodeNum, :WarmCpuNum, :WarmMemSize, :WarmDiskType, :WarmDiskSize, :NodeInfoList, :EsPublicUrl, :MultiZoneInfo, :DeployMode, :PublicAccess, :EsPublicAcl, :KibanaPrivateUrl, :KibanaPublicAccess, :KibanaPrivateAccess, :SecurityType, :SceneType, :KibanaConfig, :KibanaNodeInfo, :WebNodeTypeInfo, :Jdk, :Protocol, :SecurityGroups, :ColdNodeType, :ColdNodeNum, :ColdCpuNum, :ColdMemSize, :ColdDiskType, :ColdDiskSize, :FrozenNodeType, :FrozenNodeNum, :FrozenCpuNum, :FrozenMemSize, :FrozenDiskType, :FrozenDiskSize, :HealthStatus, :EsPrivateUrl, :EsPrivateDomain, :EsConfigSets, :OperationDuration, :OptionalWebServiceInfos, :AutoIndexEnabled
def initialize(instanceid=nil, instancename=nil, region=nil, zone=nil, appid=nil, uin=nil, vpcuid=nil, subnetuid=nil, status=nil, renewflag=nil, chargetype=nil, chargeperiod=nil, nodetype=nil, nodenum=nil, cpunum=nil, memsize=nil, disktype=nil, disksize=nil, esdomain=nil, esvip=nil, esport=nil, kibanaurl=nil, esversion=nil, esconfig=nil, esacl=nil, createtime=nil, updatetime=nil, deadline=nil, instancetype=nil, ikconfig=nil, masternodeinfo=nil, cosbackup=nil, allowcosbackup=nil, taglist=nil, licensetype=nil, enablehotwarmmode=nil, warmnodetype=nil, warmnodenum=nil, warmcpunum=nil, warmmemsize=nil, warmdisktype=nil, warmdisksize=nil, nodeinfolist=nil, espublicurl=nil, multizoneinfo=nil, deploymode=nil, publicaccess=nil, espublicacl=nil, kibanaprivateurl=nil, kibanapublicaccess=nil, kibanaprivateaccess=nil, securitytype=nil, scenetype=nil, kibanaconfig=nil, kibananodeinfo=nil, webnodetypeinfo=nil, jdk=nil, protocol=nil, securitygroups=nil, coldnodetype=nil, coldnodenum=nil, coldcpunum=nil, coldmemsize=nil, colddisktype=nil, colddisksize=nil, frozennodetype=nil, frozennodenum=nil, frozencpunum=nil, frozenmemsize=nil, frozendisktype=nil, frozendisksize=nil, healthstatus=nil, esprivateurl=nil, esprivatedomain=nil, esconfigsets=nil, operationduration=nil, optionalwebserviceinfos=nil, autoindexenabled=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Region = region
@Zone = zone
@AppId = appid
@Uin = uin
@VpcUid = vpcuid
@SubnetUid = subnetuid
@Status = status
@RenewFlag = renewflag
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@NodeType = nodetype
@NodeNum = nodenum
@CpuNum = cpunum
@MemSize = memsize
@DiskType = disktype
@DiskSize = disksize
@EsDomain = esdomain
@EsVip = esvip
@EsPort = esport
@KibanaUrl = kibanaurl
@EsVersion = esversion
@EsConfig = esconfig
@EsAcl = esacl
@CreateTime = createtime
@UpdateTime = updatetime
@Deadline = deadline
@InstanceType = instancetype
@IkConfig = ikconfig
@MasterNodeInfo = masternodeinfo
@CosBackup = cosbackup
@AllowCosBackup = allowcosbackup
@TagList = taglist
@LicenseType = licensetype
@EnableHotWarmMode = enablehotwarmmode
@WarmNodeType = warmnodetype
@WarmNodeNum = warmnodenum
@WarmCpuNum = warmcpunum
@WarmMemSize = warmmemsize
@WarmDiskType = warmdisktype
@WarmDiskSize = warmdisksize
@NodeInfoList = nodeinfolist
@EsPublicUrl = espublicurl
@MultiZoneInfo = multizoneinfo
@DeployMode = deploymode
@PublicAccess = publicaccess
@EsPublicAcl = espublicacl
@KibanaPrivateUrl = kibanaprivateurl
@KibanaPublicAccess = kibanapublicaccess
@KibanaPrivateAccess = kibanaprivateaccess
@SecurityType = securitytype
@SceneType = scenetype
@KibanaConfig = kibanaconfig
@KibanaNodeInfo = kibananodeinfo
@WebNodeTypeInfo = webnodetypeinfo
@Jdk = jdk
@Protocol = protocol
@SecurityGroups = securitygroups
@ColdNodeType = coldnodetype
@ColdNodeNum = coldnodenum
@ColdCpuNum = coldcpunum
@ColdMemSize = coldmemsize
@ColdDiskType = colddisktype
@ColdDiskSize = colddisksize
@FrozenNodeType = frozennodetype
@FrozenNodeNum = frozennodenum
@FrozenCpuNum = frozencpunum
@FrozenMemSize = frozenmemsize
@FrozenDiskType = frozendisktype
@FrozenDiskSize = frozendisksize
@HealthStatus = healthstatus
@EsPrivateUrl = esprivateurl
@EsPrivateDomain = esprivatedomain
@EsConfigSets = esconfigsets
@OperationDuration = operationduration
@OptionalWebServiceInfos = optionalwebserviceinfos
@AutoIndexEnabled = autoindexenabled
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Region = params['Region']
@Zone = params['Zone']
@AppId = params['AppId']
@Uin = params['Uin']
@VpcUid = params['VpcUid']
@SubnetUid = params['SubnetUid']
@Status = params['Status']
@RenewFlag = params['RenewFlag']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@NodeType = params['NodeType']
@NodeNum = params['NodeNum']
@CpuNum = params['CpuNum']
@MemSize = params['MemSize']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@EsDomain = params['EsDomain']
@EsVip = params['EsVip']
@EsPort = params['EsPort']
@KibanaUrl = params['KibanaUrl']
@EsVersion = params['EsVersion']
@EsConfig = params['EsConfig']
unless params['EsAcl'].nil?
@EsAcl = EsAcl.new
@EsAcl.deserialize(params['EsAcl'])
end
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@Deadline = params['Deadline']
@InstanceType = params['InstanceType']
unless params['IkConfig'].nil?
@IkConfig = EsDictionaryInfo.new
@IkConfig.deserialize(params['IkConfig'])
end
unless params['MasterNodeInfo'].nil?
@MasterNodeInfo = MasterNodeInfo.new
@MasterNodeInfo.deserialize(params['MasterNodeInfo'])
end
unless params['CosBackup'].nil?
@CosBackup = CosBackup.new
@CosBackup.deserialize(params['CosBackup'])
end
@AllowCosBackup = params['AllowCosBackup']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@LicenseType = params['LicenseType']
@EnableHotWarmMode = params['EnableHotWarmMode']
@WarmNodeType = params['WarmNodeType']
@WarmNodeNum = params['WarmNodeNum']
@WarmCpuNum = params['WarmCpuNum']
@WarmMemSize = params['WarmMemSize']
@WarmDiskType = params['WarmDiskType']
@WarmDiskSize = params['WarmDiskSize']
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
@EsPublicUrl = params['EsPublicUrl']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@DeployMode = params['DeployMode']
@PublicAccess = params['PublicAccess']
unless params['EsPublicAcl'].nil?
@EsPublicAcl = EsAcl.new
@EsPublicAcl.deserialize(params['EsPublicAcl'])
end
@KibanaPrivateUrl = params['KibanaPrivateUrl']
@KibanaPublicAccess = params['KibanaPublicAccess']
@KibanaPrivateAccess = params['KibanaPrivateAccess']
@SecurityType = params['SecurityType']
@SceneType = params['SceneType']
@KibanaConfig = params['KibanaConfig']
unless params['KibanaNodeInfo'].nil?
@KibanaNodeInfo = KibanaNodeInfo.new
@KibanaNodeInfo.deserialize(params['KibanaNodeInfo'])
end
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@Jdk = params['Jdk']
@Protocol = params['Protocol']
@SecurityGroups = params['SecurityGroups']
@ColdNodeType = params['ColdNodeType']
@ColdNodeNum = params['ColdNodeNum']
@ColdCpuNum = params['ColdCpuNum']
@ColdMemSize = params['ColdMemSize']
@ColdDiskType = params['ColdDiskType']
@ColdDiskSize = params['ColdDiskSize']
@FrozenNodeType = params['FrozenNodeType']
@FrozenNodeNum = params['FrozenNodeNum']
@FrozenCpuNum = params['FrozenCpuNum']
@FrozenMemSize = params['FrozenMemSize']
@FrozenDiskType = params['FrozenDiskType']
@FrozenDiskSize = params['FrozenDiskSize']
@HealthStatus = params['HealthStatus']
@EsPrivateUrl = params['EsPrivateUrl']
@EsPrivateDomain = params['EsPrivateDomain']
unless params['EsConfigSets'].nil?
@EsConfigSets = []
params['EsConfigSets'].each do |i|
esconfigsetinfo_tmp = EsConfigSetInfo.new
esconfigsetinfo_tmp.deserialize(i)
@EsConfigSets << esconfigsetinfo_tmp
end
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
unless params['OptionalWebServiceInfos'].nil?
@OptionalWebServiceInfos = []
params['OptionalWebServiceInfos'].each do |i|
optionalwebserviceinfo_tmp = OptionalWebServiceInfo.new
optionalwebserviceinfo_tmp.deserialize(i)
@OptionalWebServiceInfos << optionalwebserviceinfo_tmp
end
end
@AutoIndexEnabled = params['AutoIndexEnabled']
end
end
# ES集群日志详细信息
class InstanceLog < TencentCloud::Common::AbstractModel
# @param Time: 日志时间
# @type Time: String
# @param Level: 日志级别
# @type Level: String
# @param Ip: 集群节点ip
# @type Ip: String
# @param Message: 日志内容
# @type Message: String
attr_accessor :Time, :Level, :Ip, :Message
def initialize(time=nil, level=nil, ip=nil, message=nil)
@Time = time
@Level = level
@Ip = ip
@Message = message
end
def deserialize(params)
@Time = params['Time']
@Level = params['Level']
@Ip = params['Ip']
@Message = params['Message']
end
end
# OperationDetail使用此结构的数组描述新旧配置
class KeyValue < TencentCloud::Common::AbstractModel
# @param Key: 键
# @type Key: String
# @param Value: 值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# 实例Kibana节点相关信息
class KibanaNodeInfo < TencentCloud::Common::AbstractModel
# @param KibanaNodeType: Kibana节点规格
# @type KibanaNodeType: String
# @param KibanaNodeNum: Kibana节点个数
# @type KibanaNodeNum: Integer
# @param KibanaNodeCpuNum: Kibana节点CPU数
# @type KibanaNodeCpuNum: Integer
# @param KibanaNodeMemSize: Kibana节点内存GB
# @type KibanaNodeMemSize: Integer
# @param KibanaNodeDiskType: Kibana节点磁盘类型
# @type KibanaNodeDiskType: String
# @param KibanaNodeDiskSize: Kibana节点磁盘大小
# @type KibanaNodeDiskSize: Integer
attr_accessor :KibanaNodeType, :KibanaNodeNum, :KibanaNodeCpuNum, :KibanaNodeMemSize, :KibanaNodeDiskType, :KibanaNodeDiskSize
def initialize(kibananodetype=nil, kibananodenum=nil, kibananodecpunum=nil, kibananodememsize=nil, kibananodedisktype=nil, kibananodedisksize=nil)
@KibanaNodeType = kibananodetype
@KibanaNodeNum = kibananodenum
@KibanaNodeCpuNum = kibananodecpunum
@KibanaNodeMemSize = kibananodememsize
@KibanaNodeDiskType = kibananodedisktype
@KibanaNodeDiskSize = kibananodedisksize
end
def deserialize(params)
@KibanaNodeType = params['KibanaNodeType']
@KibanaNodeNum = params['KibanaNodeNum']
@KibanaNodeCpuNum = params['KibanaNodeCpuNum']
@KibanaNodeMemSize = params['KibanaNodeMemSize']
@KibanaNodeDiskType = params['KibanaNodeDiskType']
@KibanaNodeDiskSize = params['KibanaNodeDiskSize']
end
end
# Kibana视图数据
class KibanaView < TencentCloud::Common::AbstractModel
# @param Ip: Kibana节点IP
# @type Ip: String
# @param DiskSize: 节点总磁盘大小
# @type DiskSize: Integer
# @param DiskUsage: 磁盘使用率
# @type DiskUsage: Float
# @param MemSize: 节点内存大小
# @type MemSize: Integer
# @param MemUsage: 内存使用率
# @type MemUsage: Float
# @param CpuNum: 节点cpu个数
# @type CpuNum: Integer
# @param CpuUsage: cpu使用率
# @type CpuUsage: Float
# @param Zone: 可用区
# @type Zone: String
attr_accessor :Ip, :DiskSize, :DiskUsage, :MemSize, :MemUsage, :CpuNum, :CpuUsage, :Zone
def initialize(ip=nil, disksize=nil, diskusage=nil, memsize=nil, memusage=nil, cpunum=nil, cpuusage=nil, zone=nil)
@Ip = ip
@DiskSize = disksize
@DiskUsage = diskusage
@MemSize = memsize
@MemUsage = memusage
@CpuNum = cpunum
@CpuUsage = cpuusage
@Zone = zone
end
def deserialize(params)
@Ip = params['Ip']
@DiskSize = params['DiskSize']
@DiskUsage = params['DiskUsage']
@MemSize = params['MemSize']
@MemUsage = params['MemUsage']
@CpuNum = params['CpuNum']
@CpuUsage = params['CpuUsage']
@Zone = params['Zone']
end
end
# 节点本地盘信息
class LocalDiskInfo < TencentCloud::Common::AbstractModel
# @param LocalDiskType: 本地盘类型LOCAL_SATA：大数据型NVME_SSD：高IO型
# @type LocalDiskType: String
# @param LocalDiskSize: 本地盘单盘大小
# @type LocalDiskSize: Integer
# @param LocalDiskCount: 本地盘块数
# @type LocalDiskCount: Integer
attr_accessor :LocalDiskType, :LocalDiskSize, :LocalDiskCount
def initialize(localdisktype=nil, localdisksize=nil, localdiskcount=nil)
@LocalDiskType = localdisktype
@LocalDiskSize = localdisksize
@LocalDiskCount = localdiskcount
end
def deserialize(params)
@LocalDiskType = params['LocalDiskType']
@LocalDiskSize = params['LocalDiskSize']
@LocalDiskCount = params['LocalDiskCount']
end
end
# Logstash绑定的ES集群信息
class LogstashBindedES < TencentCloud::Common::AbstractModel
# @param ESInstanceId: ES集群ID
# @type ESInstanceId: String
# @param ESUserName: ES集群用户名
# @type ESUserName: String
# @param ESPassword: ES集群密码
# @type ESPassword: String
attr_accessor :ESInstanceId, :ESUserName, :ESPassword
def initialize(esinstanceid=nil, esusername=nil, espassword=nil)
@ESInstanceId = esinstanceid
@ESUserName = esusername
@ESPassword = espassword
end
def deserialize(params)
@ESInstanceId = params['ESInstanceId']
@ESUserName = params['ESUserName']
@ESPassword = params['ESPassword']
end
end
# Logstash扩展文件信息
class LogstashExtendedFile < TencentCloud::Common::AbstractModel
# @param Name: 扩展文件名称
# @type Name: String
# @param Size: 扩展文件大小，单位B
# @type Size: Integer
attr_accessor :Name, :Size
def initialize(name=nil, size=nil)
@Name = name
@Size = size
end
def deserialize(params)
@Name = params['Name']
@Size = params['Size']
end
end
# Logstash实例详细信息
class LogstashInstanceInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param AppId: 用户ID
# @type AppId: Integer
# @param Uin: 用户UIN
# @type Uin: String
# @param VpcId: 实例所属VPC的ID
# @type VpcId: String
# @param SubnetId: 实例所属子网的ID
# @type SubnetId: String
# @param Status: 实例状态，0:处理中,1:正常,-1停止,-2:销毁中,-3:已销毁
# @type Status: Integer
# @param ChargeType: 实例计费模式。取值范围： PREPAID：表示预付费，即包年包月 POSTPAID_BY_HOUR：表示后付费，即按量计费 CDHPAID：CDH付费，即只对CDH计费，不对CDH上的实例计费。
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长,单位:月
# @type ChargePeriod: Integer
# @param RenewFlag: 自动续费标识。取值范围： NOTIFY_AND_AUTO_RENEW：通知过期且自动续费 NOTIFY_AND_MANUAL_RENEW：通知过期不自动续费 DISABLE_NOTIFY_AND_MANUAL_RENEW：不通知过期不自动续费 默认取值：NOTIFY_AND_AUTO_RENEW。若该参数指定为NOTIFY_AND_AUTO_RENEW，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
# @param NodeType: 节点规格LOGSTASH.S1.SMALL2：1核2GLOGSTASH.S1.MEDIUM4：2核4GLOGSTASH.S1.MEDIUM8：2核8GLOGSTASH.S1.LARGE16：4核16GLOGSTASH.S1.2XLARGE32：8核32GLOGSTASH.S1.4XLARGE32：16核32GLOGSTASH.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param NodeNum: 节点个数
# @type NodeNum: Integer
# @param DiskType: 节点磁盘类型
# @type DiskType: String
# @param DiskSize: 节点磁盘大小，单位GB
# @type DiskSize: Integer
# @param LogstashVersion: Logstash版本号
# @type LogstashVersion: String
# @param LicenseType: License类型oss：开源版xpack：基础版默认值xpack
# @type LicenseType: String
# @param CreateTime: 实例创建时间
# @type CreateTime: String
# @param UpdateTime: 实例最后修改操作时间
# @type UpdateTime: String
# @param Deadline: 实例到期时间
# @type Deadline: String
# @param Nodes: 实例节点类型
# @type Nodes: Array
# @param BindedESInstanceId: 实例绑定的ES集群ID
# @type BindedESInstanceId: String
# @param YMLConfig: 实例的YML配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type YMLConfig: String
# @param ExtendedFiles: 扩展文件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtendedFiles: Array
attr_accessor :InstanceId, :InstanceName, :Region, :Zone, :AppId, :Uin, :VpcId, :SubnetId, :Status, :ChargeType, :ChargePeriod, :RenewFlag, :NodeType, :NodeNum, :DiskType, :DiskSize, :LogstashVersion, :LicenseType, :CreateTime, :UpdateTime, :Deadline, :Nodes, :BindedESInstanceId, :YMLConfig, :ExtendedFiles
def initialize(instanceid=nil, instancename=nil, region=nil, zone=nil, appid=nil, uin=nil, vpcid=nil, subnetid=nil, status=nil, chargetype=nil, chargeperiod=nil, renewflag=nil, nodetype=nil, nodenum=nil, disktype=nil, disksize=nil, logstashversion=nil, licensetype=nil, createtime=nil, updatetime=nil, deadline=nil, nodes=nil, bindedesinstanceid=nil, ymlconfig=nil, extendedfiles=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Region = region
@Zone = zone
@AppId = appid
@Uin = uin
@VpcId = vpcid
@SubnetId = subnetid
@Status = status
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@RenewFlag = renewflag
@NodeType = nodetype
@NodeNum = nodenum
@DiskType = disktype
@DiskSize = disksize
@LogstashVersion = logstashversion
@LicenseType = licensetype
@CreateTime = createtime
@UpdateTime = updatetime
@Deadline = deadline
@Nodes = nodes
@BindedESInstanceId = bindedesinstanceid
@YMLConfig = ymlconfig
@ExtendedFiles = extendedfiles
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Region = params['Region']
@Zone = params['Zone']
@AppId = params['AppId']
@Uin = params['Uin']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Status = params['Status']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@NodeNum = params['NodeNum']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@LogstashVersion = params['LogstashVersion']
@LicenseType = params['LicenseType']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@Deadline = params['Deadline']
unless params['Nodes'].nil?
@Nodes = []
params['Nodes'].each do |i|
logstashnodeinfo_tmp = LogstashNodeInfo.new
logstashnodeinfo_tmp.deserialize(i)
@Nodes << logstashnodeinfo_tmp
end
end
@BindedESInstanceId = params['BindedESInstanceId']
@YMLConfig = params['YMLConfig']
unless params['ExtendedFiles'].nil?
@ExtendedFiles = []
params['ExtendedFiles'].each do |i|
logstashextendedfile_tmp = LogstashExtendedFile.new
logstashextendedfile_tmp.deserialize(i)
@ExtendedFiles << logstashextendedfile_tmp
end
end
end
end
# Logstash节点信息
class LogstashNodeInfo < TencentCloud::Common::AbstractModel
# @param NodeId: 节点ID
# @type NodeId: String
# @param Ip: 节点IP
# @type Ip: String
# @param Port: 节点端口
# @type Port: Integer
attr_accessor :NodeId, :Ip, :Port
def initialize(nodeid=nil, ip=nil, port=nil)
@NodeId = nodeid
@Ip = ip
@Port = port
end
def deserialize(params)
@NodeId = params['NodeId']
@Ip = params['Ip']
@Port = params['Port']
end
end
# Logstash管道信息
class LogstashPipeline < TencentCloud::Common::AbstractModel
# @param PipelineId: 管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PipelineDesc: String
# @param Config: 管道配置内容
# @type Config: String
# @param Workers: 管道的Worker数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Workers: Integer
# @param BatchSize: 管道批处理大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchSize: Integer
# @param BatchDelay: 管道批处理延迟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchDelay: Integer
# @param QueueType: 管道缓冲队列类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueType: String
# @param QueueMaxBytes: 管道缓冲队列大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueMaxBytes: String
# @param QueueCheckPointWrites: 管道缓冲队列检查点写入数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueCheckPointWrites: Integer
attr_accessor :PipelineId, :PipelineDesc, :Config, :Workers, :BatchSize, :BatchDelay, :QueueType, :QueueMaxBytes, :QueueCheckPointWrites
def initialize(pipelineid=nil, pipelinedesc=nil, config=nil, workers=nil, batchsize=nil, batchdelay=nil, queuetype=nil, queuemaxbytes=nil, queuecheckpointwrites=nil)
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
@Config = config
@Workers = workers
@BatchSize = batchsize
@BatchDelay = batchdelay
@QueueType = queuetype
@QueueMaxBytes = queuemaxbytes
@QueueCheckPointWrites = queuecheckpointwrites
end
def deserialize(params)
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
@Config = params['Config']
@Workers = params['Workers']
@BatchSize = params['BatchSize']
@BatchDelay = params['BatchDelay']
@QueueType = params['QueueType']
@QueueMaxBytes = params['QueueMaxBytes']
@QueueCheckPointWrites = params['QueueCheckPointWrites']
end
end
# Logstash管道信息
class LogstashPipelineInfo < TencentCloud::Common::AbstractModel
# @param PipelineId: 管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PipelineDesc: String
# @param Config: 管道配置内容
# @type Config: String
# @param Status: 管道状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param Workers: 管道的Worker数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Workers: Integer
# @param BatchSize: 管道批处理大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchSize: Integer
# @param BatchDelay: 管道批处理延迟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchDelay: Integer
# @param QueueType: 管道缓冲队列类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueType: String
# @param QueueMaxBytes: 管道缓冲队列大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueMaxBytes: String
# @param QueueCheckPointWrites: 管道缓冲队列检查点写入数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueCheckPointWrites: Integer
attr_accessor :PipelineId, :PipelineDesc, :Config, :Status, :Workers, :BatchSize, :BatchDelay, :QueueType, :QueueMaxBytes, :QueueCheckPointWrites
def initialize(pipelineid=nil, pipelinedesc=nil, config=nil, status=nil, workers=nil, batchsize=nil, batchdelay=nil, queuetype=nil, queuemaxbytes=nil, queuecheckpointwrites=nil)
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
@Config = config
@Status = status
@Workers = workers
@BatchSize = batchsize
@BatchDelay = batchdelay
@QueueType = queuetype
@QueueMaxBytes = queuemaxbytes
@QueueCheckPointWrites = queuecheckpointwrites
end
def deserialize(params)
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
@Config = params['Config']
@Status = params['Status']
@Workers = params['Workers']
@BatchSize = params['BatchSize']
@BatchDelay = params['BatchDelay']
@QueueType = params['QueueType']
@QueueMaxBytes = params['QueueMaxBytes']
@QueueCheckPointWrites = params['QueueCheckPointWrites']
end
end
# 实例专用主节点相关信息
class MasterNodeInfo < TencentCloud::Common::AbstractModel
# @param EnableDedicatedMaster: 是否启用了专用主节点
# @type EnableDedicatedMaster: Boolean
# @param MasterNodeType: 专用主节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type MasterNodeType: String
# @param MasterNodeNum: 专用主节点个数
# @type MasterNodeNum: Integer
# @param MasterNodeCpuNum: 专用主节点CPU核数
# @type MasterNodeCpuNum: Integer
# @param MasterNodeMemSize: 专用主节点内存大小，单位GB
# @type MasterNodeMemSize: Integer
# @param MasterNodeDiskSize: 专用主节点磁盘大小，单位GB
# @type MasterNodeDiskSize: Integer
# @param MasterNodeDiskType: 专用主节点磁盘类型
# @type MasterNodeDiskType: String
attr_accessor :EnableDedicatedMaster, :MasterNodeType, :MasterNodeNum, :MasterNodeCpuNum, :MasterNodeMemSize, :MasterNodeDiskSize, :MasterNodeDiskType
def initialize(enablededicatedmaster=nil, masternodetype=nil, masternodenum=nil, masternodecpunum=nil, masternodememsize=nil, masternodedisksize=nil, masternodedisktype=nil)
@EnableDedicatedMaster = enablededicatedmaster
@MasterNodeType = masternodetype
@MasterNodeNum = masternodenum
@MasterNodeCpuNum = masternodecpunum
@MasterNodeMemSize = masternodememsize
@MasterNodeDiskSize = masternodedisksize
@MasterNodeDiskType = masternodedisktype
end
def deserialize(params)
@EnableDedicatedMaster = params['EnableDedicatedMaster']
@MasterNodeType = params['MasterNodeType']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeCpuNum = params['MasterNodeCpuNum']
@MasterNodeMemSize = params['MasterNodeMemSize']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@MasterNodeDiskType = params['MasterNodeDiskType']
end
end
# 集群中一种节点类型（如热数据节点，冷数据节点，专用主节点等）的规格描述信息，包括节点类型，节点个数，节点规格，磁盘类型，磁盘大小等, Type不指定时默认为热数据节点；如果节点为master节点，则DiskType和DiskSize参数会被忽略（主节点无数据盘）
class NodeInfo < TencentCloud::Common::AbstractModel
# @param NodeNum: 节点数量
# @type NodeNum: Integer
# @param NodeType: 节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param Type: 节点类型hotData: 热数据节点
# warmData: 冷数据节点
# dedicatedMaster: 专用主节点
# 默认值为hotData
# @type Type: String
# @param DiskType: 节点磁盘类型CLOUD_SSD：SSD云硬盘CLOUD_PREMIUM：高硬能云硬盘默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param LocalDiskInfo: 节点本地盘信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalDiskInfo: :class:`Tencentcloud::Es.v20180416.models.LocalDiskInfo`
# @param DiskCount: 节点磁盘块数
# @type DiskCount: Integer
# @param DiskEncrypt: 节点磁盘是否加密 0: 不加密，1: 加密；默认不加密
# @type DiskEncrypt: Integer
# @param CpuNum: cpu数目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuNum: Integer
# @param MemSize: 内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemSize: Integer
attr_accessor :NodeNum, :NodeType, :Type, :DiskType, :DiskSize, :LocalDiskInfo, :DiskCount, :DiskEncrypt, :CpuNum, :MemSize
def initialize(nodenum=nil, nodetype=nil, type=nil, disktype=nil, disksize=nil, localdiskinfo=nil, diskcount=nil, diskencrypt=nil, cpunum=nil, memsize=nil)
@NodeNum = nodenum
@NodeType = nodetype
@Type = type
@DiskType = disktype
@DiskSize = disksize
@LocalDiskInfo = localdiskinfo
@DiskCount = diskcount
@DiskEncrypt = diskencrypt
@CpuNum = cpunum
@MemSize = memsize
end
def deserialize(params)
@NodeNum = params['NodeNum']
@NodeType = params['NodeType']
@Type = params['Type']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
unless params['LocalDiskInfo'].nil?
@LocalDiskInfo = LocalDiskInfo.new
@LocalDiskInfo.deserialize(params['LocalDiskInfo'])
end
@DiskCount = params['DiskCount']
@DiskEncrypt = params['DiskEncrypt']
@CpuNum = params['CpuNum']
@MemSize = params['MemSize']
end
end
# 节点维度视图数据
class NodeView < TencentCloud::Common::AbstractModel
# @param NodeId: 节点ID
# @type NodeId: String
# @param NodeIp: 节点IP
# @type NodeIp: String
# @param Visible: 节点是否可见
# @type Visible: Float
# @param Break: 是否熔断
# @type Break: Float
# @param DiskSize: 节点总磁盘大小
# @type DiskSize: Integer
# @param DiskUsage: 磁盘使用率
# @type DiskUsage: Float
# @param MemSize: 节点内存大小，单位GB
# @type MemSize: Integer
# @param MemUsage: 内存使用率
# @type MemUsage: Float
# @param CpuNum: 节点cpu个数
# @type CpuNum: Integer
# @param CpuUsage: cpu使用率
# @type CpuUsage: Float
# @param Zone: 可用区
# @type Zone: String
# @param NodeRole: 节点角色
# @type NodeRole: String
# @param NodeHttpIp: 节点HTTP IP
# @type NodeHttpIp: String
# @param JvmMemUsage: JVM内存使用率
# @type JvmMemUsage: Float
# @param ShardNum: 节点分片数
# @type ShardNum: Integer
# @param DiskIds: 节点上磁盘ID列表
# @type DiskIds: Array
# @param Hidden: 是否为隐藏可用区
# @type Hidden: Boolean
attr_accessor :NodeId, :NodeIp, :Visible, :Break, :DiskSize, :DiskUsage, :MemSize, :MemUsage, :CpuNum, :CpuUsage, :Zone, :NodeRole, :NodeHttpIp, :JvmMemUsage, :ShardNum, :DiskIds, :Hidden
def initialize(nodeid=nil, nodeip=nil, visible=nil, _break=nil, disksize=nil, diskusage=nil, memsize=nil, memusage=nil, cpunum=nil, cpuusage=nil, zone=nil, noderole=nil, nodehttpip=nil, jvmmemusage=nil, shardnum=nil, diskids=nil, hidden=nil)
@NodeId = nodeid
@NodeIp = nodeip
@Visible = visible
@Break = _break
@DiskSize = disksize
@DiskUsage = diskusage
@MemSize = memsize
@MemUsage = memusage
@CpuNum = cpunum
@CpuUsage = cpuusage
@Zone = zone
@NodeRole = noderole
@NodeHttpIp = nodehttpip
@JvmMemUsage = jvmmemusage
@ShardNum = shardnum
@DiskIds = diskids
@Hidden = hidden
end
def deserialize(params)
@NodeId = params['NodeId']
@NodeIp = params['NodeIp']
@Visible = params['Visible']
@Break = params['Break']
@DiskSize = params['DiskSize']
@DiskUsage = params['DiskUsage']
@MemSize = params['MemSize']
@MemUsage = params['MemUsage']
@CpuNum = params['CpuNum']
@CpuUsage = params['CpuUsage']
@Zone = params['Zone']
@NodeRole = params['NodeRole']
@NodeHttpIp = params['NodeHttpIp']
@JvmMemUsage = params['JvmMemUsage']
@ShardNum = params['ShardNum']
@DiskIds = params['DiskIds']
@Hidden = params['Hidden']
end
end
# ES集群操作详细信息
class Operation < TencentCloud::Common::AbstractModel
# @param Id: 操作唯一id
# @type Id: Integer
# @param StartTime: 操作开始时间
# @type StartTime: String
# @param Type: 操作类型
# @type Type: String
# @param Detail: 操作详情
# @type Detail: :class:`Tencentcloud::Es.v20180416.models.OperationDetail`
# @param Result: 操作结果
# @type Result: String
# @param Tasks: 流程任务信息
# @type Tasks: Array
# @param Progress: 操作进度
# @type Progress: Float
attr_accessor :Id, :StartTime, :Type, :Detail, :Result, :Tasks, :Progress
def initialize(id=nil, starttime=nil, type=nil, detail=nil, result=nil, tasks=nil, progress=nil)
@Id = id
@StartTime = starttime
@Type = type
@Detail = detail
@Result = result
@Tasks = tasks
@Progress = progress
end
def deserialize(params)
@Id = params['Id']
@StartTime = params['StartTime']
@Type = params['Type']
unless params['Detail'].nil?
@Detail = OperationDetail.new
@Detail.deserialize(params['Detail'])
end
@Result = params['Result']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
taskdetail_tmp = TaskDetail.new
taskdetail_tmp.deserialize(i)
@Tasks << taskdetail_tmp
end
end
@Progress = params['Progress']
end
end
# 操作详情
class OperationDetail < TencentCloud::Common::AbstractModel
# @param OldInfo: 实例原始配置信息
# @type OldInfo: Array
# @param NewInfo: 实例更新后配置信息
# @type NewInfo: Array
attr_accessor :OldInfo, :NewInfo
def initialize(oldinfo=nil, newinfo=nil)
@OldInfo = oldinfo
@NewInfo = newinfo
end
def deserialize(params)
unless params['OldInfo'].nil?
@OldInfo = []
params['OldInfo'].each do |i|
keyvalue_tmp = KeyValue.new
keyvalue_tmp.deserialize(i)
@OldInfo << keyvalue_tmp
end
end
unless params['NewInfo'].nil?
@NewInfo = []
params['NewInfo'].each do |i|
keyvalue_tmp = KeyValue.new
keyvalue_tmp.deserialize(i)
@NewInfo << keyvalue_tmp
end
end
end
end
# 集群可运维时间
class OperationDuration < TencentCloud::Common::AbstractModel
# @param Periods: 维护周期，表示周一到周日，可取值[0, 6]
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Periods: Array
# @param TimeStart: 维护开始时间
# @type TimeStart: String
# @param TimeEnd: 维护结束时间
# @type TimeEnd: String
# @param TimeZone: 时区，以UTC形式表示
# @type TimeZone: String
attr_accessor :Periods, :TimeStart, :TimeEnd, :TimeZone
def initialize(periods=nil, timestart=nil, timeend=nil, timezone=nil)
@Periods = periods
@TimeStart = timestart
@TimeEnd = timeend
@TimeZone = timezone
end
def deserialize(params)
@Periods = params['Periods']
@TimeStart = params['TimeStart']
@TimeEnd = params['TimeEnd']
@TimeZone = params['TimeZone']
end
end
# 集群可运维时间
class OperationDurationUpdated < TencentCloud::Common::AbstractModel
# @param Periods: 维护周期，表示周一到周日，可取值[0, 6]
# @type Periods: Array
# @param TimeStart: 维护开始时间
# @type TimeStart: String
# @param TimeEnd: 维护结束时间
# @type TimeEnd: String
# @param TimeZone: 时区，以UTC形式表示
# @type TimeZone: String
# @param MoreInstances: ES集群ID数组
# @type MoreInstances: Array
attr_accessor :Periods, :TimeStart, :TimeEnd, :TimeZone, :MoreInstances
def initialize(periods=nil, timestart=nil, timeend=nil, timezone=nil, moreinstances=nil)
@Periods = periods
@TimeStart = timestart
@TimeEnd = timeend
@TimeZone = timezone
@MoreInstances = moreinstances
end
def deserialize(params)
@Periods = params['Periods']
@TimeStart = params['TimeStart']
@TimeEnd = params['TimeEnd']
@TimeZone = params['TimeZone']
@MoreInstances = params['MoreInstances']
end
end
# 可选web组件信息
class OptionalWebServiceInfo < TencentCloud::Common::AbstractModel
# @param Type: 类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param Status: 状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param PublicUrl: 公网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicUrl: String
# @param PrivateUrl: 内网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateUrl: String
# @param PublicAccess: 公网访问权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicAccess: String
# @param PrivateAccess: 内网访问权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateAccess: String
# @param Version: 版本号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
attr_accessor :Type, :Status, :PublicUrl, :PrivateUrl, :PublicAccess, :PrivateAccess, :Version
def initialize(type=nil, status=nil, publicurl=nil, privateurl=nil, publicaccess=nil, privateaccess=nil, version=nil)
@Type = type
@Status = status
@PublicUrl = publicurl
@PrivateUrl = privateurl
@PublicAccess = publicaccess
@PrivateAccess = privateaccess
@Version = version
end
def deserialize(params)
@Type = params['Type']
@Status = params['Status']
@PublicUrl = params['PublicUrl']
@PrivateUrl = params['PrivateUrl']
@PublicAccess = params['PublicAccess']
@PrivateAccess = params['PrivateAccess']
@Version = params['Version']
end
end
# RestartInstance请求参数结构体
class RestartInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param ForceRestart: 是否强制重启true：强制重启false：不强制重启默认false
# @type ForceRestart: Boolean
# @param RestartMode: 重启模式：0 滚动重启； 1 全量重启
# @type RestartMode: Integer
attr_accessor :InstanceId, :ForceRestart, :RestartMode
def initialize(instanceid=nil, forcerestart=nil, restartmode=nil)
@InstanceId = instanceid
@ForceRestart = forcerestart
@RestartMode = restartmode
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ForceRestart = params['ForceRestart']
@RestartMode = params['RestartMode']
end
end
# RestartInstance返回参数结构体
class RestartInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartKibana请求参数结构体
class RestartKibanaRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# RestartKibana返回参数结构体
class RestartKibanaResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartLogstashInstance请求参数结构体
class RestartLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Type: 重启类型，0全量重启，1滚动重启
# @type Type: Integer
attr_accessor :InstanceId, :Type
def initialize(instanceid=nil, type=nil)
@InstanceId = instanceid
@Type = type
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Type = params['Type']
end
end
# RestartLogstashInstance返回参数结构体
class RestartLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartNodes请求参数结构体
class RestartNodesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param NodeNames: 节点名称列表
# @type NodeNames: Array
# @param ForceRestart: 是否强制重启
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :NodeNames, :ForceRestart
def initialize(instanceid=nil, nodenames=nil, forcerestart=nil)
@InstanceId = instanceid
@NodeNames = nodenames
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@NodeNames = params['NodeNames']
@ForceRestart = params['ForceRestart']
end
end
# RestartNodes返回参数结构体
class RestartNodesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# SaveAndDeployLogstashPipeline请求参数结构体
class SaveAndDeployLogstashPipelineRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Pipeline: 实例管道信息
# @type Pipeline: :class:`Tencentcloud::Es.v20180416.models.LogstashPipeline`
# @param OpType: 操作类型1：只保存2：保存并部署
# @type OpType: Integer
attr_accessor :InstanceId, :Pipeline, :OpType
def initialize(instanceid=nil, pipeline=nil, optype=nil)
@InstanceId = instanceid
@Pipeline = pipeline
@OpType = optype
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Pipeline'].nil?
@Pipeline = LogstashPipeline.new
@Pipeline.deserialize(params['Pipeline'])
end
@OpType = params['OpType']
end
end
# SaveAndDeployLogstashPipeline返回参数结构体
class SaveAndDeployLogstashPipelineResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# StartLogstashPipelines请求参数结构体
class StartLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# StartLogstashPipelines返回参数结构体
class StartLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# StopLogstashPipelines请求参数结构体
class StopLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# StopLogstashPipelines返回参数结构体
class StopLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 实例操作记录流程任务中的子任务信息（如升级检查任务中的各个检查项）
class SubTaskDetail < TencentCloud::Common::AbstractModel
# @param Name: 子任务名
# @type Name: String
# @param Result: 子任务结果
# @type Result: Boolean
# @param ErrMsg: 子任务错误信息
# @type ErrMsg: String
# @param Type: 子任务类型
# @type Type: String
# @param Status: 子任务状态，0处理中 1成功 -1失败
# @type Status: Integer
# @param FailedIndices: 升级检查失败的索引名
# @type FailedIndices: Array
# @param FinishTime: 子任务结束时间
# @type FinishTime: String
# @param Level: 子任务等级，1警告 2失败
# @type Level: Integer
attr_accessor :Name, :Result, :ErrMsg, :Type, :Status, :FailedIndices, :FinishTime, :Level
def initialize(name=nil, result=nil, errmsg=nil, type=nil, status=nil, failedindices=nil, finishtime=nil, level=nil)
@Name = name
@Result = result
@ErrMsg = errmsg
@Type = type
@Status = status
@FailedIndices = failedindices
@FinishTime = finishtime
@Level = level
end
def deserialize(params)
@Name = params['Name']
@Result = params['Result']
@ErrMsg = params['ErrMsg']
@Type = params['Type']
@Status = params['Status']
@FailedIndices = params['FailedIndices']
@FinishTime = params['FinishTime']
@Level = params['Level']
end
end
# 实例标签信息
class TagInfo < TencentCloud::Common::AbstractModel
# @param TagKey: 标签键
# @type TagKey: String
# @param TagValue: 标签值
# @type TagValue: String
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 实例操作记录中的流程任务信息
class TaskDetail < TencentCloud::Common::AbstractModel
# @param Name: 任务名
# @type Name: String
# @param Progress: 任务进度
# @type Progress: Float
# @param FinishTime: 任务完成时间
# @type FinishTime: String
# @param SubTasks: 子任务
# @type SubTasks: Array
attr_accessor :Name, :Progress, :FinishTime, :SubTasks
def initialize(name=nil, progress=nil, finishtime=nil, subtasks=nil)
@Name = name
@Progress = progress
@FinishTime = finishtime
@SubTasks = subtasks
end
def deserialize(params)
@Name = params['Name']
@Progress = params['Progress']
@FinishTime = params['FinishTime']
unless params['SubTasks'].nil?
@SubTasks = []
params['SubTasks'].each do |i|
subtaskdetail_tmp = SubTaskDetail.new
subtaskdetail_tmp.deserialize(i)
@SubTasks << subtaskdetail_tmp
end
end
end
end
# UpdateDiagnoseSettings请求参数结构体
class UpdateDiagnoseSettingsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param Status: 0：开启智能运维；-1：关闭智能运维
# @type Status: Integer
# @param CronTime: 智能运维每天定时巡检时间
# @type CronTime: String
attr_accessor :InstanceId, :Status, :CronTime
def initialize(instanceid=nil, status=nil, crontime=nil)
@InstanceId = instanceid
@Status = status
@CronTime = crontime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Status = params['Status']
@CronTime = params['CronTime']
end
end
# UpdateDiagnoseSettings返回参数结构体
class UpdateDiagnoseSettingsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateDictionaries请求参数结构体
class UpdateDictionariesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param IkMainDicts: IK分词主词典COS地址
# @type IkMainDicts: Array
# @param IkStopwords: IK分词停用词词典COS地址
# @type IkStopwords: Array
# @param Synonym: 同义词词典COS地址
# @type Synonym: Array
# @param QQDict: QQ分词词典COS地址
# @type QQDict: Array
# @param UpdateType: 0：安装；1：删除。默认值0
# @type UpdateType: Integer
# @param ForceRestart: 是否强制重启集群。默认值false
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :IkMainDicts, :IkStopwords, :Synonym, :QQDict, :UpdateType, :ForceRestart
def initialize(instanceid=nil, ikmaindicts=nil, ikstopwords=nil, synonym=nil, qqdict=nil, updatetype=nil, forcerestart=nil)
@InstanceId = instanceid
@IkMainDicts = ikmaindicts
@IkStopwords = ikstopwords
@Synonym = synonym
@QQDict = qqdict
@UpdateType = updatetype
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IkMainDicts = params['IkMainDicts']
@IkStopwords = params['IkStopwords']
@Synonym = params['Synonym']
@QQDict = params['QQDict']
@UpdateType = params['UpdateType']
@ForceRestart = params['ForceRestart']
end
end
# UpdateDictionaries返回参数结构体
class UpdateDictionariesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateIndex请求参数结构体
class UpdateIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 更新的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 更新的索引名
# @type IndexName: String
# @param UpdateMetaJson: 更新的索引元数据JSON，如mappings、settings
# @type UpdateMetaJson: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param RolloverBackingIndex: 是否滚动后备索引
# @type RolloverBackingIndex: Boolean
attr_accessor :InstanceId, :IndexType, :IndexName, :UpdateMetaJson, :Username, :Password, :RolloverBackingIndex
def initialize(instanceid=nil, indextype=nil, indexname=nil, updatemetajson=nil, username=nil, password=nil, rolloverbackingindex=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@UpdateMetaJson = updatemetajson
@Username = username
@Password = password
@RolloverBackingIndex = rolloverbackingindex
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@UpdateMetaJson = params['UpdateMetaJson']
@Username = params['Username']
@Password = params['Password']
@RolloverBackingIndex = params['RolloverBackingIndex']
end
end
# UpdateIndex返回参数结构体
class UpdateIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateInstance请求参数结构体
class UpdateInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param NodeNum: 已废弃请使用NodeInfoList
# 节点个数（2-50个）
# @type NodeNum: Integer
# @param EsConfig: ES配置项（JSON格式字符串）
# @type EsConfig: String
# @param Password: 默认用户elastic的密码（8到16位，至少包括两项（[a-z,A-Z],[0-9]和[-!@#$%&^*+=_:;,.?]的特殊符号）
# @type Password: String
# @param EsAcl: 访问控制列表
# @type EsAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param DiskSize: 已废弃请使用NodeInfoList
# 磁盘大小（单位GB）
# @type DiskSize: Integer
# @param NodeType: 已废弃请使用NodeInfoList
# 节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type NodeType: String
# @param MasterNodeNum: 已废弃请使用NodeInfoList
# 专用主节点个数（只支持3个或5个）
# @type MasterNodeNum: Integer
# @param MasterNodeType: 已废弃请使用NodeInfoList
# 专用主节点规格ES.S1.SMALL2：1核2GES.S1.MEDIUM4：2核4GES.S1.MEDIUM8：2核8GES.S1.LARGE16：4核16GES.S1.2XLARGE32：8核32GES.S1.4XLARGE32：16核32GES.S1.4XLARGE64：16核64G
# @type MasterNodeType: String
# @param MasterNodeDiskSize: 已废弃请使用NodeInfoList
# 专用主节点磁盘大小（单位GB系统默认配置为50GB,暂不支持自定义）
# @type MasterNodeDiskSize: Integer
# @param ForceRestart: 更新配置时是否强制重启true强制重启false不强制重启当前仅更新EsConfig时需要设置，默认值为false
# @type ForceRestart: Boolean
# @param CosBackup: COS自动备份信息
# @type CosBackup: :class:`Tencentcloud::Es.v20180416.models.CosBackup`
# @param NodeInfoList: 节点信息列表，可以只传递要更新的节点及其对应的规格信息。支持的操作包括修改一种节点的个数修改一种节点的节点规格及磁盘大小增加一种节点类型（需要同时指定该节点的类型，个数，规格，磁盘等信息）上述操作一次只能进行一种，且磁盘类型不支持修改
# @type NodeInfoList: Array
# @param PublicAccess: 公网访问状态
# @type PublicAccess: String
# @param EsPublicAcl: 公网访问控制列表
# @type EsPublicAcl: :class:`Tencentcloud::Es.v20180416.models.EsPublicAcl`
# @param KibanaPublicAccess: Kibana公网访问状态
# @type KibanaPublicAccess: String
# @param KibanaPrivateAccess: Kibana内网访问状态
# @type KibanaPrivateAccess: String
# @param BasicSecurityType: ES 6.8及以上版本基础版开启或关闭用户认证
# @type BasicSecurityType: Integer
# @param KibanaPrivatePort: Kibana内网端口
# @type KibanaPrivatePort: Integer
# @param ScaleType: 0: 蓝绿变更方式扩容，集群不重启 （默认） 1: 磁盘解挂载扩容，集群滚动重启
# @type ScaleType: Integer
# @param MultiZoneInfo: 多可用区部署
# @type MultiZoneInfo: Array
# @param SceneType: 场景化模板类型 -1：不启用 1：通用 2：日志 3：搜索
# @type SceneType: Integer
# @param KibanaConfig: Kibana配置项（JSON格式字符串）
# @type KibanaConfig: String
# @param WebNodeTypeInfo: 可视化节点配置
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param SwitchPrivateLink: 切换到新网络架构
# @type SwitchPrivateLink: String
# @param EnableCerebro: 启用Cerebro
# @type EnableCerebro: Boolean
# @param CerebroPublicAccess: Cerebro公网访问状态
# @type CerebroPublicAccess: String
# @param CerebroPrivateAccess: Cerebro内网访问状态
# @type CerebroPrivateAccess: String
# @param EsConfigSet: 新增或修改的配置组信息
# @type EsConfigSet: :class:`Tencentcloud::Es.v20180416.models.EsConfigSetInfo`
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDurationUpdated`
attr_accessor :InstanceId, :InstanceName, :NodeNum, :EsConfig, :Password, :EsAcl, :DiskSize, :NodeType, :MasterNodeNum, :MasterNodeType, :MasterNodeDiskSize, :ForceRestart, :CosBackup, :NodeInfoList, :PublicAccess, :EsPublicAcl, :KibanaPublicAccess, :KibanaPrivateAccess, :BasicSecurityType, :KibanaPrivatePort, :ScaleType, :MultiZoneInfo, :SceneType, :KibanaConfig, :WebNodeTypeInfo, :SwitchPrivateLink, :EnableCerebro, :CerebroPublicAccess, :CerebroPrivateAccess, :EsConfigSet, :OperationDuration
def initialize(instanceid=nil, instancename=nil, nodenum=nil, esconfig=nil, password=nil, esacl=nil, disksize=nil, nodetype=nil, masternodenum=nil, masternodetype=nil, masternodedisksize=nil, forcerestart=nil, cosbackup=nil, nodeinfolist=nil, publicaccess=nil, espublicacl=nil, kibanapublicaccess=nil, kibanaprivateaccess=nil, basicsecuritytype=nil, kibanaprivateport=nil, scaletype=nil, multizoneinfo=nil, scenetype=nil, kibanaconfig=nil, webnodetypeinfo=nil, switchprivatelink=nil, enablecerebro=nil, cerebropublicaccess=nil, cerebroprivateaccess=nil, esconfigset=nil, operationduration=nil)
@InstanceId = instanceid
@InstanceName = instancename
@NodeNum = nodenum
@EsConfig = esconfig
@Password = password
@EsAcl = esacl
@DiskSize = disksize
@NodeType = nodetype
@MasterNodeNum = masternodenum
@MasterNodeType = masternodetype
@MasterNodeDiskSize = masternodedisksize
@ForceRestart = forcerestart
@CosBackup = cosbackup
@NodeInfoList = nodeinfolist
@PublicAccess = publicaccess
@EsPublicAcl = espublicacl
@KibanaPublicAccess = kibanapublicaccess
@KibanaPrivateAccess = kibanaprivateaccess
@BasicSecurityType = basicsecuritytype
@KibanaPrivatePort = kibanaprivateport
@ScaleType = scaletype
@MultiZoneInfo = multizoneinfo
@SceneType = scenetype
@KibanaConfig = kibanaconfig
@WebNodeTypeInfo = webnodetypeinfo
@SwitchPrivateLink = switchprivatelink
@EnableCerebro = enablecerebro
@CerebroPublicAccess = cerebropublicaccess
@CerebroPrivateAccess = cerebroprivateaccess
@EsConfigSet = esconfigset
@OperationDuration = operationduration
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@NodeNum = params['NodeNum']
@EsConfig = params['EsConfig']
@Password = params['Password']
unless params['EsAcl'].nil?
@EsAcl = EsAcl.new
@EsAcl.deserialize(params['EsAcl'])
end
@DiskSize = params['DiskSize']
@NodeType = params['NodeType']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeType = params['MasterNodeType']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@ForceRestart = params['ForceRestart']
unless params['CosBackup'].nil?
@CosBackup = CosBackup.new
@CosBackup.deserialize(params['CosBackup'])
end
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
@PublicAccess = params['PublicAccess']
unless params['EsPublicAcl'].nil?
@EsPublicAcl = EsPublicAcl.new
@EsPublicAcl.deserialize(params['EsPublicAcl'])
end
@KibanaPublicAccess = params['KibanaPublicAccess']
@KibanaPrivateAccess = params['KibanaPrivateAccess']
@BasicSecurityType = params['BasicSecurityType']
@KibanaPrivatePort = params['KibanaPrivatePort']
@ScaleType = params['ScaleType']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@SceneType = params['SceneType']
@KibanaConfig = params['KibanaConfig']
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@SwitchPrivateLink = params['SwitchPrivateLink']
@EnableCerebro = params['EnableCerebro']
@CerebroPublicAccess = params['CerebroPublicAccess']
@CerebroPrivateAccess = params['CerebroPrivateAccess']
unless params['EsConfigSet'].nil?
@EsConfigSet = EsConfigSetInfo.new
@EsConfigSet.deserialize(params['EsConfigSet'])
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDurationUpdated.new
@OperationDuration.deserialize(params['OperationDuration'])
end
end
end
# UpdateInstance返回参数结构体
class UpdateInstanceResponse < TencentCloud::Common::AbstractModel
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# UpdateJdk请求参数结构体
class UpdateJdkRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param Jdk: Jdk类型，支持kona和oracle
# @type Jdk: String
# @param Gc: Gc类型，支持g1和cms
# @type Gc: String
# @param ForceRestart: 是否强制重启
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :Jdk, :Gc, :ForceRestart
def initialize(instanceid=nil, jdk=nil, gc=nil, forcerestart=nil)
@InstanceId = instanceid
@Jdk = jdk
@Gc = gc
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Jdk = params['Jdk']
@Gc = params['Gc']
@ForceRestart = params['ForceRestart']
end
end
# UpdateJdk返回参数结构体
class UpdateJdkResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateLogstashInstance请求参数结构体
class UpdateLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param NodeNum: 实例节点数量
# @type NodeNum: Integer
# @param YMLConfig: 实例YML配置
# @type YMLConfig: String
# @param BindedES: 实例绑定的ES集群信息
# @type BindedES: :class:`Tencentcloud::Es.v20180416.models.LogstashBindedES`
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param ExtendedFiles: 扩展文件列表
# @type ExtendedFiles: Array
# @param NodeType: 实例规格
# @type NodeType: String
# @param DiskSize: 节点磁盘容量
# @type DiskSize: Integer
attr_accessor :InstanceId, :NodeNum, :YMLConfig, :BindedES, :InstanceName, :ExtendedFiles, :NodeType, :DiskSize
def initialize(instanceid=nil, nodenum=nil, ymlconfig=nil, bindedes=nil, instancename=nil, extendedfiles=nil, nodetype=nil, disksize=nil)
@InstanceId = instanceid
@NodeNum = nodenum
@YMLConfig = ymlconfig
@BindedES = bindedes
@InstanceName = instancename
@ExtendedFiles = extendedfiles
@NodeType = nodetype
@DiskSize = disksize
end
def deserialize(params)
@InstanceId = params['InstanceId']
@NodeNum = params['NodeNum']
@YMLConfig = params['YMLConfig']
unless params['BindedES'].nil?
@BindedES = LogstashBindedES.new
@BindedES.deserialize(params['BindedES'])
end
@InstanceName = params['InstanceName']
unless params['ExtendedFiles'].nil?
@ExtendedFiles = []
params['ExtendedFiles'].each do |i|
logstashextendedfile_tmp = LogstashExtendedFile.new
logstashextendedfile_tmp.deserialize(i)
@ExtendedFiles << logstashextendedfile_tmp
end
end
@NodeType = params['NodeType']
@DiskSize = params['DiskSize']
end
end
# UpdateLogstashInstance返回参数结构体
class UpdateLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateLogstashPipelineDesc请求参数结构体
class UpdateLogstashPipelineDescRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineId: 实例管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# @type PipelineDesc: String
attr_accessor :InstanceId, :PipelineId, :PipelineDesc
def initialize(instanceid=nil, pipelineid=nil, pipelinedesc=nil)
@InstanceId = instanceid
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
end
end
# UpdateLogstashPipelineDesc返回参数结构体
class UpdateLogstashPipelineDescResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdatePlugins请求参数结构体
class UpdatePluginsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstallPluginList: 需要安装的插件名列表
# @type InstallPluginList: Array
# @param RemovePluginList: 需要卸载的插件名列表
# @type RemovePluginList: Array
# @param ForceRestart: 是否强制重启，默认值false
# @type ForceRestart: Boolean
# @param ForceUpdate: 是否重新安装，默认值false
# @type ForceUpdate: Boolean
# @param PluginType: 0：系统插件
# @type PluginType: Integer
attr_accessor :InstanceId, :InstallPluginList, :RemovePluginList, :ForceRestart, :ForceUpdate, :PluginType
def initialize(instanceid=nil, installpluginlist=nil, removepluginlist=nil, forcerestart=nil, forceupdate=nil, plugintype=nil)
@InstanceId = instanceid
@InstallPluginList = installpluginlist
@RemovePluginList = removepluginlist
@ForceRestart = forcerestart
@ForceUpdate = forceupdate
@PluginType = plugintype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstallPluginList = params['InstallPluginList']
@RemovePluginList = params['RemovePluginList']
@ForceRestart = params['ForceRestart']
@ForceUpdate = params['ForceUpdate']
@PluginType = params['PluginType']
end
end
# UpdatePlugins返回参数结构体
class UpdatePluginsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateRequestTargetNodeTypes请求参数结构体
class UpdateRequestTargetNodeTypesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param TargetNodeTypes: 接收请求的目标节点类型列表
# @type TargetNodeTypes: Array
attr_accessor :InstanceId, :TargetNodeTypes
def initialize(instanceid=nil, targetnodetypes=nil)
@InstanceId = instanceid
@TargetNodeTypes = targetnodetypes
end
def deserialize(params)
@InstanceId = params['InstanceId']
@TargetNodeTypes = params['TargetNodeTypes']
end
end
# UpdateRequestTargetNodeTypes返回参数结构体
class UpdateRequestTargetNodeTypesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpgradeInstance请求参数结构体
class UpgradeInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param EsVersion: 目标ES版本，支持：”6.4.3“, "6.8.2"，"7.5.1"
# @type EsVersion: String
# @param CheckOnly: 是否只做升级检查，默认值为false
# @type CheckOnly: Boolean
# @param LicenseType: 目标商业特性版本：oss 开源版basic 基础版当前仅在5.6.4升级6.x版本时使用，默认值为basic
# @type LicenseType: String
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证1：不开启2：开启
# @type BasicSecurityType: Integer
# @param UpgradeMode: 升级方式：scale 蓝绿变更restart 滚动重启默认值为scale
# @type UpgradeMode: String
# @param CosBackup: 升级版本前是否对集群进行备份，默认不备份
# @type CosBackup: Boolean
attr_accessor :InstanceId, :EsVersion, :CheckOnly, :LicenseType, :BasicSecurityType, :UpgradeMode, :CosBackup
def initialize(instanceid=nil, esversion=nil, checkonly=nil, licensetype=nil, basicsecuritytype=nil, upgrademode=nil, cosbackup=nil)
@InstanceId = instanceid
@EsVersion = esversion
@CheckOnly = checkonly
@LicenseType = licensetype
@BasicSecurityType = basicsecuritytype
@UpgradeMode = upgrademode
@CosBackup = cosbackup
end
def deserialize(params)
@InstanceId = params['InstanceId']
@EsVersion = params['EsVersion']
@CheckOnly = params['CheckOnly']
@LicenseType = params['LicenseType']
@BasicSecurityType = params['BasicSecurityType']
@UpgradeMode = params['UpgradeMode']
@CosBackup = params['CosBackup']
end
end
# UpgradeInstance返回参数结构体
class UpgradeInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpgradeLicense请求参数结构体
class UpgradeLicenseRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param LicenseType: License类型oss：开源版basic：基础版platinum：白金版默认值platinum
# @type LicenseType: String
# @param AutoVoucher: 是否自动使用代金券0：不自动使用1：自动使用默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证1：不开启2：开启
# @type BasicSecurityType: Integer
# @param ForceRestart: 是否强制重启true强制重启false不强制重启 默认值false
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :LicenseType, :AutoVoucher, :VoucherIds, :BasicSecurityType, :ForceRestart
def initialize(instanceid=nil, licensetype=nil, autovoucher=nil, voucherids=nil, basicsecuritytype=nil, forcerestart=nil)
@InstanceId = instanceid
@LicenseType = licensetype
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@BasicSecurityType = basicsecuritytype
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LicenseType = params['LicenseType']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@BasicSecurityType = params['BasicSecurityType']
@ForceRestart = params['ForceRestart']
end
end
# UpgradeLicense返回参数结构体
class UpgradeLicenseResponse < TencentCloud::Common::AbstractModel
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# 可视化节点配置
class WebNodeTypeInfo < TencentCloud::Common::AbstractModel
# @param NodeNum: 可视化节点个数，固定为1
# @type NodeNum: Integer
# @param NodeType: 可视化节点规格
# @type NodeType: String
attr_accessor :NodeNum, :NodeType
def initialize(nodenum=nil, nodetype=nil)
@NodeNum = nodenum
@NodeType = nodetype
end
def deserialize(params)
@NodeNum = params['NodeNum']
@NodeType = params['NodeType']
end
end
# 多可用区部署时可用区的详细信息
class ZoneDetail < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param SubnetId: 子网ID
# @type SubnetId: String
attr_accessor :Zone, :SubnetId
def initialize(zone=nil, subnetid=nil)
@Zone = zone
@SubnetId = subnetid
end
def deserialize(params)
@Zone = params['Zone']
@SubnetId = params['SubnetId']
end
end
end
end
end