# Copyright 2018 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


module Google
  module Container
    module V1
      # Parameters that describe the nodes in a cluster.
      # @!attribute [rw] machine_type
      #   @return [String]
      #     The name of a Google Compute Engine [machine
      #     type](/compute/docs/machine-types) (e.g.
      #     +n1-standard-1+).
      #
      #     If unspecified, the default machine type is
      #     +n1-standard-1+.
      # @!attribute [rw] disk_size_gb
      #   @return [Integer]
      #     Size of the disk attached to each node, specified in GB.
      #     The smallest allowed disk size is 10GB.
      #
      #     If unspecified, the default disk size is 100GB.
      # @!attribute [rw] oauth_scopes
      #   @return [Array<String>]
      #     The set of Google API scopes to be made available on all of the
      #     node VMs under the "default" service account.
      #
      #     The following scopes are recommended, but not required, and by default are
      #     not included:
      #
      #     * +https://www.googleapis.com/auth/compute+ is required for mounting
      #       persistent storage on your nodes.
      #     * +https://www.googleapis.com/auth/devstorage.read_only+ is required for
      #       communicating with **gcr.io**
      #       (the [Google Container Registry](https://cloud.google.com/container-registry/)).
      #
      #     If unspecified, no scopes are added, unless Cloud Logging or Cloud
      #     Monitoring are enabled, in which case their required scopes will be added.
      # @!attribute [rw] service_account
      #   @return [String]
      #     The Google Cloud Platform Service Account to be used by the node VMs. If
      #     no Service Account is specified, the "default" service account is used.
      # @!attribute [rw] metadata
      #   @return [Hash{String => String}]
      #     The metadata key/value pairs assigned to instances in the cluster.
      #
      #     Keys must conform to the regexp [a-zA-Z0-9-_]+ and be less than 128 bytes
      #     in length. These are reflected as part of a URL in the metadata server.
      #     Additionally, to avoid ambiguity, keys must not conflict with any other
      #     metadata keys for the project or be one of the four reserved keys:
      #     "instance-template", "kube-env", "startup-script", and "user-data"
      #
      #     Values are free-form strings, and only have meaning as interpreted by
      #     the image running in the instance. The only restriction placed on them is
      #     that each value's size must be less than or equal to 32 KB.
      #
      #     The total size of all keys and values must be less than 512 KB.
      # @!attribute [rw] image_type
      #   @return [String]
      #     The image type to use for this node. Note that for a given image type,
      #     the latest version of it will be used.
      # @!attribute [rw] labels
      #   @return [Hash{String => String}]
      #     The map of Kubernetes labels (key/value pairs) to be applied to each node.
      #     These will added in addition to any default label(s) that
      #     Kubernetes may apply to the node.
      #     In case of conflict in label keys, the applied set may differ depending on
      #     the Kubernetes version -- it's best to assume the behavior is undefined
      #     and conflicts should be avoided.
      #     For more information, including usage and the valid values, see:
      #     https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
      # @!attribute [rw] local_ssd_count
      #   @return [Integer]
      #     The number of local SSD disks to be attached to the node.
      #
      #     The limit for this value is dependant upon the maximum number of
      #     disks available on a machine per zone. See:
      #     https://cloud.google.com/compute/docs/disks/local-ssd#local_ssd_limits
      #     for more information.
      # @!attribute [rw] tags
      #   @return [Array<String>]
      #     The list of instance tags applied to all nodes. Tags are used to identify
      #     valid sources or targets for network firewalls and are specified by
      #     the client during cluster or node pool creation. Each tag within the list
      #     must comply with RFC1035.
      # @!attribute [rw] preemptible
      #   @return [true, false]
      #     Whether the nodes are created as preemptible VM instances. See:
      #     https://cloud.google.com/compute/docs/instances/preemptible for more
      #     information about preemptible VM instances.
      # @!attribute [rw] accelerators
      #   @return [Array<Google::Container::V1::AcceleratorConfig>]
      #     A list of hardware accelerators to be attached to each node.
      #     See https://cloud.google.com/compute/docs/gpus for more information about
      #     support for GPUs.
      # @!attribute [rw] min_cpu_platform
      #   @return [String]
      #     Minimum CPU platform to be used by this instance. The instance may be
      #     scheduled on the specified or newer CPU platform. Applicable values are the
      #     friendly names of CPU platforms, such as
      #     <code>minCpuPlatform: &quot;Intel Haswell&quot;</code> or
      #     <code>minCpuPlatform: &quot;Intel Sandy Bridge&quot;</code>. For more
      #     information, read [how to specify min CPU platform](https://cloud.google.com/compute/docs/instances/specify-min-cpu-platform)
      class NodeConfig; end

      # The authentication information for accessing the master endpoint.
      # Authentication can be done using HTTP basic auth or using client
      # certificates.
      # @!attribute [rw] username
      #   @return [String]
      #     The username to use for HTTP basic authentication to the master endpoint.
      #     For clusters v1.6.0 and later, you can disable basic authentication by
      #     providing an empty username.
      # @!attribute [rw] password
      #   @return [String]
      #     The password to use for HTTP basic authentication to the master endpoint.
      #     Because the master endpoint is open to the Internet, you should create a
      #     strong password.  If a password is provided for cluster creation, username
      #     must be non-empty.
      # @!attribute [rw] client_certificate_config
      #   @return [Google::Container::V1::ClientCertificateConfig]
      #     Configuration for client certificate authentication on the cluster.  If no
      #     configuration is specified, a client certificate is issued.
      # @!attribute [rw] cluster_ca_certificate
      #   @return [String]
      #     [Output only] Base64-encoded public certificate that is the root of
      #     trust for the cluster.
      # @!attribute [rw] client_certificate
      #   @return [String]
      #     [Output only] Base64-encoded public certificate used by clients to
      #     authenticate to the cluster endpoint.
      # @!attribute [rw] client_key
      #   @return [String]
      #     [Output only] Base64-encoded private key used by clients to authenticate
      #     to the cluster endpoint.
      class MasterAuth; end

      # Configuration for client certificates on the cluster.
      # @!attribute [rw] issue_client_certificate
      #   @return [true, false]
      #     Issue a client certificate.
      class ClientCertificateConfig; end

      # Configuration for the addons that can be automatically spun up in the
      # cluster, enabling additional functionality.
      # @!attribute [rw] http_load_balancing
      #   @return [Google::Container::V1::HttpLoadBalancing]
      #     Configuration for the HTTP (L7) load balancing controller addon, which
      #     makes it easy to set up HTTP load balancers for services in a cluster.
      # @!attribute [rw] horizontal_pod_autoscaling
      #   @return [Google::Container::V1::HorizontalPodAutoscaling]
      #     Configuration for the horizontal pod autoscaling feature, which
      #     increases or decreases the number of replica pods a replication controller
      #     has based on the resource usage of the existing pods.
      # @!attribute [rw] kubernetes_dashboard
      #   @return [Google::Container::V1::KubernetesDashboard]
      #     Configuration for the Kubernetes Dashboard.
      # @!attribute [rw] network_policy_config
      #   @return [Google::Container::V1::NetworkPolicyConfig]
      #     Configuration for NetworkPolicy. This only tracks whether the addon
      #     is enabled or not on the Master, it does not track whether network policy
      #     is enabled for the nodes.
      class AddonsConfig; end

      # Configuration options for the HTTP (L7) load balancing controller addon,
      # which makes it easy to set up HTTP load balancers for services in a cluster.
      # @!attribute [rw] disabled
      #   @return [true, false]
      #     Whether the HTTP Load Balancing controller is enabled in the cluster.
      #     When enabled, it runs a small pod in the cluster that manages the load
      #     balancers.
      class HttpLoadBalancing; end

      # Configuration options for the horizontal pod autoscaling feature, which
      # increases or decreases the number of replica pods a replication controller
      # has based on the resource usage of the existing pods.
      # @!attribute [rw] disabled
      #   @return [true, false]
      #     Whether the Horizontal Pod Autoscaling feature is enabled in the cluster.
      #     When enabled, it ensures that a Heapster pod is running in the cluster,
      #     which is also used by the Cloud Monitoring service.
      class HorizontalPodAutoscaling; end

      # Configuration for the Kubernetes Dashboard.
      # @!attribute [rw] disabled
      #   @return [true, false]
      #     Whether the Kubernetes Dashboard is enabled for this cluster.
      class KubernetesDashboard; end

      # Configuration for NetworkPolicy. This only tracks whether the addon
      # is enabled or not on the Master, it does not track whether network policy
      # is enabled for the nodes.
      # @!attribute [rw] disabled
      #   @return [true, false]
      #     Whether NetworkPolicy is enabled for this cluster.
      class NetworkPolicyConfig; end

      # Master authorized networks is a Beta feature.
      # Configuration options for the master authorized networks feature. Enabled
      # master authorized networks will disallow all external traffic to access
      # Kubernetes master through HTTPS except traffic from the given CIDR blocks,
      # Google Compute Engine Public IPs and Google Prod IPs.
      # @!attribute [rw] enabled
      #   @return [true, false]
      #     Whether or not master authorized networks is enabled.
      # @!attribute [rw] cidr_blocks
      #   @return [Array<Google::Container::V1::MasterAuthorizedNetworksConfig::CidrBlock>]
      #     cidr_blocks define up to 10 external networks that could access
      #     Kubernetes master through HTTPS.
      class MasterAuthorizedNetworksConfig
        # CidrBlock contains an optional name and one CIDR block.
        # @!attribute [rw] display_name
        #   @return [String]
        #     display_name is an optional field for users to identify CIDR blocks.
        # @!attribute [rw] cidr_block
        #   @return [String]
        #     cidr_block must be specified in CIDR notation.
        class CidrBlock; end
      end

      # Configuration for the legacy Attribute Based Access Control authorization
      # mode.
      # @!attribute [rw] enabled
      #   @return [true, false]
      #     Whether the ABAC authorizer is enabled for this cluster. When enabled,
      #     identities in the system, including service accounts, nodes, and
      #     controllers, will have statically granted permissions beyond those
      #     provided by the RBAC configuration or IAM.
      class LegacyAbac; end

      # Configuration options for the NetworkPolicy feature.
      # https://kubernetes.io/docs/concepts/services-networking/networkpolicies/
      # @!attribute [rw] provider
      #   @return [Google::Container::V1::NetworkPolicy::Provider]
      #     The selected network policy provider.
      # @!attribute [rw] enabled
      #   @return [true, false]
      #     Whether network policy is enabled on the cluster.
      class NetworkPolicy
        # Allowed Network Policy providers.
        module Provider
          # Not set
          PROVIDER_UNSPECIFIED = 0

          # Tigera (Calico Felix).
          CALICO = 1
        end
      end

      # Configuration for controlling how IPs are allocated in the cluster.
      # @!attribute [rw] use_ip_aliases
      #   @return [true, false]
      #     Whether alias IPs will be used for pod IPs in the cluster.
      # @!attribute [rw] create_subnetwork
      #   @return [true, false]
      #     Whether a new subnetwork will be created automatically for the cluster.
      #
      #     This field is only applicable when +use_ip_aliases+ is true.
      # @!attribute [rw] subnetwork_name
      #   @return [String]
      #     A custom subnetwork name to be used if +create_subnetwork+ is true.  If
      #     this field is empty, then an automatic name will be chosen for the new
      #     subnetwork.
      # @!attribute [rw] cluster_ipv4_cidr
      #   @return [String]
      #     This field is deprecated, use cluster_ipv4_cidr_block.
      # @!attribute [rw] node_ipv4_cidr
      #   @return [String]
      #     This field is deprecated, use node_ipv4_cidr_block.
      # @!attribute [rw] services_ipv4_cidr
      #   @return [String]
      #     This field is deprecated, use services_ipv4_cidr_block.
      # @!attribute [rw] cluster_secondary_range_name
      #   @return [String]
      #     The name of the secondary range to be used for the cluster CIDR
      #     block.  The secondary range will be used for pod IP
      #     addresses. This must be an existing secondary range associated
      #     with the cluster subnetwork.
      #
      #     This field is only applicable with use_ip_aliases is true and
      #     create_subnetwork is false.
      # @!attribute [rw] services_secondary_range_name
      #   @return [String]
      #     The name of the secondary range to be used as for the services
      #     CIDR block.  The secondary range will be used for service
      #     ClusterIPs. This must be an existing secondary range associated
      #     with the cluster subnetwork.
      #
      #     This field is only applicable with use_ip_aliases is true and
      #     create_subnetwork is false.
      # @!attribute [rw] cluster_ipv4_cidr_block
      #   @return [String]
      #     The IP address range for the cluster pod IPs. If this field is set, then
      #     +cluster.cluster_ipv4_cidr+ must be left blank.
      #
      #     This field is only applicable when +use_ip_aliases+ is true.
      #
      #     Set to blank to have a range chosen with the default size.
      #
      #     Set to /netmask (e.g. +/14+) to have a range chosen with a specific
      #     netmask.
      #
      #     Set to a
      #     [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
      #     notation (e.g. +10.96.0.0/14+) from the RFC-1918 private networks (e.g.
      #     +10.0.0.0/8+, +172.16.0.0/12+, +192.168.0.0/16+) to pick a specific range
      #     to use.
      # @!attribute [rw] node_ipv4_cidr_block
      #   @return [String]
      #     The IP address range of the instance IPs in this cluster.
      #
      #     This is applicable only if +create_subnetwork+ is true.
      #
      #     Set to blank to have a range chosen with the default size.
      #
      #     Set to /netmask (e.g. +/14+) to have a range chosen with a specific
      #     netmask.
      #
      #     Set to a
      #     [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
      #     notation (e.g. +10.96.0.0/14+) from the RFC-1918 private networks (e.g.
      #     +10.0.0.0/8+, +172.16.0.0/12+, +192.168.0.0/16+) to pick a specific range
      #     to use.
      # @!attribute [rw] services_ipv4_cidr_block
      #   @return [String]
      #     The IP address range of the services IPs in this cluster. If blank, a range
      #     will be automatically chosen with the default size.
      #
      #     This field is only applicable when +use_ip_aliases+ is true.
      #
      #     Set to blank to have a range chosen with the default size.
      #
      #     Set to /netmask (e.g. +/14+) to have a range chosen with a specific
      #     netmask.
      #
      #     Set to a
      #     [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
      #     notation (e.g. +10.96.0.0/14+) from the RFC-1918 private networks (e.g.
      #     +10.0.0.0/8+, +172.16.0.0/12+, +192.168.0.0/16+) to pick a specific range
      #     to use.
      class IPAllocationPolicy; end

      # A Google Container Engine cluster.
      # @!attribute [rw] name
      #   @return [String]
      #     The name of this cluster. The name must be unique within this project
      #     and zone, and can be up to 40 characters with the following restrictions:
      #
      #     * Lowercase letters, numbers, and hyphens only.
      #     * Must start with a letter.
      #     * Must end with a number or a letter.
      # @!attribute [rw] description
      #   @return [String]
      #     An optional description of this cluster.
      # @!attribute [rw] initial_node_count
      #   @return [Integer]
      #     The number of nodes to create in this cluster. You must ensure that your
      #     Compute Engine <a href="/compute/docs/resource-quotas">resource quota</a>
      #     is sufficient for this number of instances. You must also have available
      #     firewall and routes quota.
      #     For requests, this field should only be used in lieu of a
      #     "node_pool" object, since this configuration (along with the
      #     "node_config") will be used to create a "NodePool" object with an
      #     auto-generated name. Do not use this and a node_pool at the same time.
      # @!attribute [rw] node_config
      #   @return [Google::Container::V1::NodeConfig]
      #     Parameters used in creating the cluster's nodes.
      #     See +nodeConfig+ for the description of its properties.
      #     For requests, this field should only be used in lieu of a
      #     "node_pool" object, since this configuration (along with the
      #     "initial_node_count") will be used to create a "NodePool" object with an
      #     auto-generated name. Do not use this and a node_pool at the same time.
      #     For responses, this field will be populated with the node configuration of
      #     the first node pool.
      #
      #     If unspecified, the defaults are used.
      # @!attribute [rw] master_auth
      #   @return [Google::Container::V1::MasterAuth]
      #     The authentication information for accessing the master endpoint.
      # @!attribute [rw] logging_service
      #   @return [String]
      #     The logging service the cluster should use to write logs.
      #     Currently available options:
      #
      #     * +logging.googleapis.com+ - the Google Cloud Logging service.
      #     * +none+ - no logs will be exported from the cluster.
      #     * if left as an empty string,+logging.googleapis.com+ will be used.
      # @!attribute [rw] monitoring_service
      #   @return [String]
      #     The monitoring service the cluster should use to write metrics.
      #     Currently available options:
      #
      #     * +monitoring.googleapis.com+ - the Google Cloud Monitoring service.
      #     * +none+ - no metrics will be exported from the cluster.
      #     * if left as an empty string, +monitoring.googleapis.com+ will be used.
      # @!attribute [rw] network
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [network](https://cloud.google.com/compute/docs/networks-and-firewalls#networks) to which the
      #     cluster is connected. If left unspecified, the +default+ network
      #     will be used.
      # @!attribute [rw] cluster_ipv4_cidr
      #   @return [String]
      #     The IP address range of the container pods in this cluster, in
      #     [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
      #     notation (e.g. +10.96.0.0/14+). Leave blank to have
      #     one automatically chosen or specify a +/14+ block in +10.0.0.0/8+.
      # @!attribute [rw] addons_config
      #   @return [Google::Container::V1::AddonsConfig]
      #     Configurations for the various addons available to run in the cluster.
      # @!attribute [rw] subnetwork
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [subnetwork](https://cloud.google.com/compute/docs/subnetworks) to which the
      #     cluster is connected.
      # @!attribute [rw] node_pools
      #   @return [Array<Google::Container::V1::NodePool>]
      #     The node pools associated with this cluster.
      #     This field should not be set if "node_config" or "initial_node_count" are
      #     specified.
      # @!attribute [rw] locations
      #   @return [Array<String>]
      #     The list of Google Compute Engine
      #     [locations](https://cloud.google.com/compute/docs/zones#available) in which the cluster's nodes
      #     should be located.
      # @!attribute [rw] enable_kubernetes_alpha
      #   @return [true, false]
      #     Kubernetes alpha features are enabled on this cluster. This includes alpha
      #     API groups (e.g. v1alpha1) and features that may not be production ready in
      #     the kubernetes version of the master and nodes.
      #     The cluster has no SLA for uptime and master/node upgrades are disabled.
      #     Alpha enabled clusters are automatically deleted thirty days after
      #     creation.
      # @!attribute [rw] resource_labels
      #   @return [Hash{String => String}]
      #     The resource labels for the cluster to use to annotate any related
      #     Google Compute Engine resources.
      # @!attribute [rw] label_fingerprint
      #   @return [String]
      #     The fingerprint of the set of labels for this cluster.
      # @!attribute [rw] legacy_abac
      #   @return [Google::Container::V1::LegacyAbac]
      #     Configuration for the legacy ABAC authorization mode.
      # @!attribute [rw] network_policy
      #   @return [Google::Container::V1::NetworkPolicy]
      #     Configuration options for the NetworkPolicy feature.
      # @!attribute [rw] ip_allocation_policy
      #   @return [Google::Container::V1::IPAllocationPolicy]
      #     Configuration for cluster IP allocation.
      # @!attribute [rw] master_authorized_networks_config
      #   @return [Google::Container::V1::MasterAuthorizedNetworksConfig]
      #     Master authorized networks is a Beta feature.
      #     The configuration options for master authorized networks feature.
      # @!attribute [rw] maintenance_policy
      #   @return [Google::Container::V1::MaintenancePolicy]
      #     Configure the maintenance policy for this cluster.
      # @!attribute [rw] self_link
      #   @return [String]
      #     [Output only] Server-defined URL for the resource.
      # @!attribute [rw] zone
      #   @return [String]
      #     [Output only] The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] endpoint
      #   @return [String]
      #     [Output only] The IP address of this cluster's master endpoint.
      #     The endpoint can be accessed from the internet at
      #     +https://username:password@endpoint/+.
      #
      #     See the +masterAuth+ property of this resource for username and
      #     password information.
      # @!attribute [rw] initial_cluster_version
      #   @return [String]
      #     The initial Kubernetes version for this cluster.  Valid versions are those
      #     found in validMasterVersions returned by getServerConfig.  The version can
      #     be upgraded over time; such upgrades are reflected in
      #     currentMasterVersion and currentNodeVersion.
      # @!attribute [rw] current_master_version
      #   @return [String]
      #     [Output only] The current software version of the master endpoint.
      # @!attribute [rw] current_node_version
      #   @return [String]
      #     [Output only] The current version of the node software components.
      #     If they are currently at multiple versions because they're in the process
      #     of being upgraded, this reflects the minimum version of all nodes.
      # @!attribute [rw] create_time
      #   @return [String]
      #     [Output only] The time the cluster was created, in
      #     [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
      # @!attribute [rw] status
      #   @return [Google::Container::V1::Cluster::Status]
      #     [Output only] The current status of this cluster.
      # @!attribute [rw] status_message
      #   @return [String]
      #     [Output only] Additional information about the current status of this
      #     cluster, if available.
      # @!attribute [rw] node_ipv4_cidr_size
      #   @return [Integer]
      #     [Output only] The size of the address space on each node for hosting
      #     containers. This is provisioned from within the +container_ipv4_cidr+
      #     range.
      # @!attribute [rw] services_ipv4_cidr
      #   @return [String]
      #     [Output only] The IP address range of the Kubernetes services in
      #     this cluster, in
      #     [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing)
      #     notation (e.g. +1.2.3.4/29+). Service addresses are
      #     typically put in the last +/16+ from the container CIDR.
      # @!attribute [rw] instance_group_urls
      #   @return [Array<String>]
      #     Deprecated. Use node_pools.instance_group_urls.
      # @!attribute [rw] current_node_count
      #   @return [Integer]
      #     [Output only] The number of nodes currently in the cluster.
      # @!attribute [rw] expire_time
      #   @return [String]
      #     [Output only] The time the cluster will be automatically
      #     deleted in [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
      class Cluster
        # The current status of the cluster.
        module Status
          # Not set.
          STATUS_UNSPECIFIED = 0

          # The PROVISIONING state indicates the cluster is being created.
          PROVISIONING = 1

          # The RUNNING state indicates the cluster has been created and is fully
          # usable.
          RUNNING = 2

          # The RECONCILING state indicates that some work is actively being done on
          # the cluster, such as upgrading the master or node software. Details can
          # be found in the +statusMessage+ field.
          RECONCILING = 3

          # The STOPPING state indicates the cluster is being deleted.
          STOPPING = 4

          # The ERROR state indicates the cluster may be unusable. Details
          # can be found in the +statusMessage+ field.
          ERROR = 5
        end
      end

      # ClusterUpdate describes an update to the cluster. Exactly one update can
      # be applied to a cluster with each request, so at most one field can be
      # provided.
      # @!attribute [rw] desired_node_version
      #   @return [String]
      #     The Kubernetes version to change the nodes to (typically an
      #     upgrade). Use +-+ to upgrade to the latest version supported by
      #     the server.
      # @!attribute [rw] desired_monitoring_service
      #   @return [String]
      #     The monitoring service the cluster should use to write metrics.
      #     Currently available options:
      #
      #     * "monitoring.googleapis.com" - the Google Cloud Monitoring service
      #     * "none" - no metrics will be exported from the cluster
      # @!attribute [rw] desired_addons_config
      #   @return [Google::Container::V1::AddonsConfig]
      #     Configurations for the various addons available to run in the cluster.
      # @!attribute [rw] desired_node_pool_id
      #   @return [String]
      #     The node pool to be upgraded. This field is mandatory if
      #     "desired_node_version", "desired_image_family" or
      #     "desired_node_pool_autoscaling" is specified and there is more than one
      #     node pool on the cluster.
      # @!attribute [rw] desired_image_type
      #   @return [String]
      #     The desired image type for the node pool.
      #     NOTE: Set the "desired_node_pool" field as well.
      # @!attribute [rw] desired_node_pool_autoscaling
      #   @return [Google::Container::V1::NodePoolAutoscaling]
      #     Autoscaler configuration for the node pool specified in
      #     desired_node_pool_id. If there is only one pool in the
      #     cluster and desired_node_pool_id is not provided then
      #     the change applies to that single node pool.
      # @!attribute [rw] desired_locations
      #   @return [Array<String>]
      #     The desired list of Google Compute Engine
      #     [locations](https://cloud.google.com/compute/docs/zones#available) in which the cluster's nodes
      #     should be located. Changing the locations a cluster is in will result
      #     in nodes being either created or removed from the cluster, depending on
      #     whether locations are being added or removed.
      #
      #     This list must always include the cluster's primary zone.
      # @!attribute [rw] desired_master_authorized_networks_config
      #   @return [Google::Container::V1::MasterAuthorizedNetworksConfig]
      #     Master authorized networks is a Beta feature.
      #     The desired configuration options for master authorized networks feature.
      # @!attribute [rw] desired_master_version
      #   @return [String]
      #     The Kubernetes version to change the master to. The only valid value is the
      #     latest supported version. Use "-" to have the server automatically select
      #     the latest version.
      class ClusterUpdate; end

      # This operation resource represents operations that may have happened or are
      # happening on the cluster. All fields are output only.
      # @!attribute [rw] name
      #   @return [String]
      #     The server-assigned ID for the operation.
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the operation
      #     is taking place.
      # @!attribute [rw] operation_type
      #   @return [Google::Container::V1::Operation::Type]
      #     The operation type.
      # @!attribute [rw] status
      #   @return [Google::Container::V1::Operation::Status]
      #     The current status of the operation.
      # @!attribute [rw] detail
      #   @return [String]
      #     Detailed operation progress, if available.
      # @!attribute [rw] status_message
      #   @return [String]
      #     If an error has occurred, a textual description of the error.
      # @!attribute [rw] self_link
      #   @return [String]
      #     Server-defined URL for the resource.
      # @!attribute [rw] target_link
      #   @return [String]
      #     Server-defined URL for the target of the operation.
      # @!attribute [rw] start_time
      #   @return [String]
      #     [Output only] The time the operation started, in
      #     [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
      # @!attribute [rw] end_time
      #   @return [String]
      #     [Output only] The time the operation completed, in
      #     [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
      class Operation
        # Current status of the operation.
        module Status
          # Not set.
          STATUS_UNSPECIFIED = 0

          # The operation has been created.
          PENDING = 1

          # The operation is currently running.
          RUNNING = 2

          # The operation is done, either cancelled or completed.
          DONE = 3

          # The operation is aborting.
          ABORTING = 4
        end

        # Operation type.
        module Type
          # Not set.
          TYPE_UNSPECIFIED = 0

          # Cluster create.
          CREATE_CLUSTER = 1

          # Cluster delete.
          DELETE_CLUSTER = 2

          # A master upgrade.
          UPGRADE_MASTER = 3

          # A node upgrade.
          UPGRADE_NODES = 4

          # Cluster repair.
          REPAIR_CLUSTER = 5

          # Cluster update.
          UPDATE_CLUSTER = 6

          # Node pool create.
          CREATE_NODE_POOL = 7

          # Node pool delete.
          DELETE_NODE_POOL = 8

          # Set node pool management.
          SET_NODE_POOL_MANAGEMENT = 9

          # Automatic node pool repair.
          AUTO_REPAIR_NODES = 10

          # Automatic node upgrade.
          AUTO_UPGRADE_NODES = 11

          # Set labels.
          SET_LABELS = 12

          # Set/generate master auth materials
          SET_MASTER_AUTH = 13

          # Set node pool size.
          SET_NODE_POOL_SIZE = 14

          # Updates network policy for a cluster.
          SET_NETWORK_POLICY = 15

          # Set the maintenance policy.
          SET_MAINTENANCE_POLICY = 16
        end
      end

      # CreateClusterRequest creates a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster
      #   @return [Google::Container::V1::Cluster]
      #     A [cluster
      #     resource](/container-engine/reference/rest/v1/projects.zones.clusters)
      class CreateClusterRequest; end

      # GetClusterRequest gets the settings of a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to retrieve.
      class GetClusterRequest; end

      # UpdateClusterRequest updates the settings of a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] update
      #   @return [Google::Container::V1::ClusterUpdate]
      #     A description of the update.
      class UpdateClusterRequest; end

      # UpdateNodePoolRequests update a node pool's image and/or version.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to upgrade.
      # @!attribute [rw] node_version
      #   @return [String]
      #     The Kubernetes version to change the nodes to (typically an
      #     upgrade). Use +-+ to upgrade to the latest version supported by
      #     the server.
      # @!attribute [rw] image_type
      #   @return [String]
      #     The desired image type for the node pool.
      class UpdateNodePoolRequest; end

      # SetNodePoolAutoscalingRequest sets the autoscaler settings of a node pool.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to upgrade.
      # @!attribute [rw] autoscaling
      #   @return [Google::Container::V1::NodePoolAutoscaling]
      #     Autoscaling configuration for the node pool.
      class SetNodePoolAutoscalingRequest; end

      # SetLoggingServiceRequest sets the logging service of a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] logging_service
      #   @return [String]
      #     The logging service the cluster should use to write metrics.
      #     Currently available options:
      #
      #     * "logging.googleapis.com" - the Google Cloud Logging service
      #     * "none" - no metrics will be exported from the cluster
      class SetLoggingServiceRequest; end

      # SetMonitoringServiceRequest sets the monitoring service of a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] monitoring_service
      #   @return [String]
      #     The monitoring service the cluster should use to write metrics.
      #     Currently available options:
      #
      #     * "monitoring.googleapis.com" - the Google Cloud Monitoring service
      #     * "none" - no metrics will be exported from the cluster
      class SetMonitoringServiceRequest; end

      # SetAddonsConfigRequest sets the addons associated with the cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] addons_config
      #   @return [Google::Container::V1::AddonsConfig]
      #     The desired configurations for the various addons available to run in the
      #     cluster.
      class SetAddonsConfigRequest; end

      # SetLocationsRequest sets the locations of the cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] locations
      #   @return [Array<String>]
      #     The desired list of Google Compute Engine
      #     [locations](https://cloud.google.com/compute/docs/zones#available) in which the cluster's nodes
      #     should be located. Changing the locations a cluster is in will result
      #     in nodes being either created or removed from the cluster, depending on
      #     whether locations are being added or removed.
      #
      #     This list must always include the cluster's primary zone.
      class SetLocationsRequest; end

      # UpdateMasterRequest updates the master of the cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] master_version
      #   @return [String]
      #     The Kubernetes version to change the master to. The only valid value is the
      #     latest supported version. Use "-" to have the server automatically select
      #     the latest version.
      class UpdateMasterRequest; end

      # SetMasterAuthRequest updates the admin password of a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to upgrade.
      # @!attribute [rw] action
      #   @return [Google::Container::V1::SetMasterAuthRequest::Action]
      #     The exact form of action to be taken on the master auth.
      # @!attribute [rw] update
      #   @return [Google::Container::V1::MasterAuth]
      #     A description of the update.
      class SetMasterAuthRequest
        # Operation type: what type update to perform.
        module Action
          # Operation is unknown and will error out.
          UNKNOWN = 0

          # Set the password to a user generated value.
          SET_PASSWORD = 1

          # Generate a new password and set it to that.
          GENERATE_PASSWORD = 2

          # Set the username.  If an empty username is provided, basic authentication
          # is disabled for the cluster.  If a non-empty username is provided, basic
          # authentication is enabled, with either a provided password or a generated
          # one.
          SET_USERNAME = 3
        end
      end

      # DeleteClusterRequest deletes a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to delete.
      class DeleteClusterRequest; end

      # ListClustersRequest lists clusters.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides, or "-" for all zones.
      class ListClustersRequest; end

      # ListClustersResponse is the result of ListClustersRequest.
      # @!attribute [rw] clusters
      #   @return [Array<Google::Container::V1::Cluster>]
      #     A list of clusters in the project in the specified zone, or
      #     across all ones.
      # @!attribute [rw] missing_zones
      #   @return [Array<String>]
      #     If any zones are listed here, the list of clusters returned
      #     may be missing those zones.
      class ListClustersResponse; end

      # GetOperationRequest gets a single operation.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] operation_id
      #   @return [String]
      #     The server-assigned +name+ of the operation.
      class GetOperationRequest; end

      # ListOperationsRequest lists operations.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine [zone](https://cloud.google.com/compute/docs/zones#available)
      #     to return operations for, or +-+ for all zones.
      class ListOperationsRequest; end

      # CancelOperationRequest cancels a single operation.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the operation resides.
      # @!attribute [rw] operation_id
      #   @return [String]
      #     The server-assigned +name+ of the operation.
      class CancelOperationRequest; end

      # ListOperationsResponse is the result of ListOperationsRequest.
      # @!attribute [rw] operations
      #   @return [Array<Google::Container::V1::Operation>]
      #     A list of operations in the project in the specified zone.
      # @!attribute [rw] missing_zones
      #   @return [Array<String>]
      #     If any zones are listed here, the list of operations returned
      #     may be missing the operations from those zones.
      class ListOperationsResponse; end

      # Gets the current Container Engine service configuration.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine [zone](https://cloud.google.com/compute/docs/zones#available)
      #     to return operations for.
      class GetServerConfigRequest; end

      # Container Engine service configuration.
      # @!attribute [rw] default_cluster_version
      #   @return [String]
      #     Version of Kubernetes the service deploys by default.
      # @!attribute [rw] valid_node_versions
      #   @return [Array<String>]
      #     List of valid node upgrade target versions.
      # @!attribute [rw] default_image_type
      #   @return [String]
      #     Default image type.
      # @!attribute [rw] valid_image_types
      #   @return [Array<String>]
      #     List of valid image types.
      # @!attribute [rw] valid_master_versions
      #   @return [Array<String>]
      #     List of valid master versions.
      class ServerConfig; end

      # CreateNodePoolRequest creates a node pool for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      # @!attribute [rw] node_pool
      #   @return [Google::Container::V1::NodePool]
      #     The node pool to create.
      class CreateNodePoolRequest; end

      # DeleteNodePoolRequest deletes a node pool for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to delete.
      class DeleteNodePoolRequest; end

      # ListNodePoolsRequest lists the node pool(s) for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      class ListNodePoolsRequest; end

      # GetNodePoolRequest retrieves a node pool for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool.
      class GetNodePoolRequest; end

      # NodePool contains the name and configuration for a cluster's node pool.
      # Node pools are a set of nodes (i.e. VM's), with a common configuration and
      # specification, under the control of the cluster master. They may have a set
      # of Kubernetes labels applied to them, which may be used to reference them
      # during pod scheduling. They may also be resized up or down, to accommodate
      # the workload.
      # @!attribute [rw] name
      #   @return [String]
      #     The name of the node pool.
      # @!attribute [rw] config
      #   @return [Google::Container::V1::NodeConfig]
      #     The node configuration of the pool.
      # @!attribute [rw] initial_node_count
      #   @return [Integer]
      #     The initial node count for the pool. You must ensure that your
      #     Compute Engine <a href="/compute/docs/resource-quotas">resource quota</a>
      #     is sufficient for this number of instances. You must also have available
      #     firewall and routes quota.
      # @!attribute [rw] self_link
      #   @return [String]
      #     [Output only] Server-defined URL for the resource.
      # @!attribute [rw] version
      #   @return [String]
      #     The version of the Kubernetes of this node.
      # @!attribute [rw] instance_group_urls
      #   @return [Array<String>]
      #     [Output only] The resource URLs of the [managed instance
      #     groups](/compute/docs/instance-groups/creating-groups-of-managed-instances)
      #     associated with this node pool.
      # @!attribute [rw] status
      #   @return [Google::Container::V1::NodePool::Status]
      #     [Output only] The status of the nodes in this pool instance.
      # @!attribute [rw] status_message
      #   @return [String]
      #     [Output only] Additional information about the current status of this
      #     node pool instance, if available.
      # @!attribute [rw] autoscaling
      #   @return [Google::Container::V1::NodePoolAutoscaling]
      #     Autoscaler configuration for this NodePool. Autoscaler is enabled
      #     only if a valid configuration is present.
      # @!attribute [rw] management
      #   @return [Google::Container::V1::NodeManagement]
      #     NodeManagement configuration for this NodePool.
      class NodePool
        # The current status of the node pool instance.
        module Status
          # Not set.
          STATUS_UNSPECIFIED = 0

          # The PROVISIONING state indicates the node pool is being created.
          PROVISIONING = 1

          # The RUNNING state indicates the node pool has been created
          # and is fully usable.
          RUNNING = 2

          # The RUNNING_WITH_ERROR state indicates the node pool has been created
          # and is partially usable. Some error state has occurred and some
          # functionality may be impaired. Customer may need to reissue a request
          # or trigger a new update.
          RUNNING_WITH_ERROR = 3

          # The RECONCILING state indicates that some work is actively being done on
          # the node pool, such as upgrading node software. Details can
          # be found in the +statusMessage+ field.
          RECONCILING = 4

          # The STOPPING state indicates the node pool is being deleted.
          STOPPING = 5

          # The ERROR state indicates the node pool may be unusable. Details
          # can be found in the +statusMessage+ field.
          ERROR = 6
        end
      end

      # NodeManagement defines the set of node management services turned on for the
      # node pool.
      # @!attribute [rw] auto_upgrade
      #   @return [true, false]
      #     A flag that specifies whether node auto-upgrade is enabled for the node
      #     pool. If enabled, node auto-upgrade helps keep the nodes in your node pool
      #     up to date with the latest release version of Kubernetes.
      # @!attribute [rw] auto_repair
      #   @return [true, false]
      #     A flag that specifies whether the node auto-repair is enabled for the node
      #     pool. If enabled, the nodes in this node pool will be monitored and, if
      #     they fail health checks too many times, an automatic repair action will be
      #     triggered.
      # @!attribute [rw] upgrade_options
      #   @return [Google::Container::V1::AutoUpgradeOptions]
      #     Specifies the Auto Upgrade knobs for the node pool.
      class NodeManagement; end

      # AutoUpgradeOptions defines the set of options for the user to control how
      # the Auto Upgrades will proceed.
      # @!attribute [rw] auto_upgrade_start_time
      #   @return [String]
      #     [Output only] This field is set when upgrades are about to commence
      #     with the approximate start time for the upgrades, in
      #     [RFC3339](https://www.ietf.org/rfc/rfc3339.txt) text format.
      # @!attribute [rw] description
      #   @return [String]
      #     [Output only] This field is set when upgrades are about to commence
      #     with the description of the upgrade.
      class AutoUpgradeOptions; end

      # MaintenancePolicy defines the maintenance policy to be used for the cluster.
      # @!attribute [rw] window
      #   @return [Google::Container::V1::MaintenanceWindow]
      #     Specifies the maintenance window in which maintenance may be performed.
      class MaintenancePolicy; end

      # MaintenanceWindow defines the maintenance window to be used for the cluster.
      # @!attribute [rw] daily_maintenance_window
      #   @return [Google::Container::V1::DailyMaintenanceWindow]
      #     DailyMaintenanceWindow specifies a daily maintenance operation window.
      class MaintenanceWindow; end

      # Time window specified for daily maintenance operations.
      # @!attribute [rw] start_time
      #   @return [String]
      #     Time within the maintenance window to start the maintenance operations.
      #     Time format should be in [RFC3339](https://www.ietf.org/rfc/rfc3339.txt)
      #     format "HH:MM”, where HH : [00-23] and MM : [00-59] GMT.
      # @!attribute [rw] duration
      #   @return [String]
      #     [Output only] Duration of the time window, automatically chosen to be
      #     smallest possible in the given scenario.
      #     Duration will be in [RFC3339](https://www.ietf.org/rfc/rfc3339.txt)
      #     format "PTnHnMnS".
      class DailyMaintenanceWindow; end

      # SetNodePoolManagementRequest sets the node management properties of a node
      # pool.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to update.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to update.
      # @!attribute [rw] management
      #   @return [Google::Container::V1::NodeManagement]
      #     NodeManagement configuration for the node pool.
      class SetNodePoolManagementRequest; end

      # SetNodePoolSizeRequest sets the size a node
      # pool.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to update.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to update.
      # @!attribute [rw] node_count
      #   @return [Integer]
      #     The desired node count for the pool.
      class SetNodePoolSizeRequest; end

      # RollbackNodePoolUpgradeRequest rollbacks the previously Aborted or Failed
      # NodePool upgrade. This will be an no-op if the last upgrade successfully
      # completed.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to rollback.
      # @!attribute [rw] node_pool_id
      #   @return [String]
      #     The name of the node pool to rollback.
      class RollbackNodePoolUpgradeRequest; end

      # ListNodePoolsResponse is the result of ListNodePoolsRequest.
      # @!attribute [rw] node_pools
      #   @return [Array<Google::Container::V1::NodePool>]
      #     A list of node pools for a cluster.
      class ListNodePoolsResponse; end

      # NodePoolAutoscaling contains information required by cluster autoscaler to
      # adjust the size of the node pool to the current cluster usage.
      # @!attribute [rw] enabled
      #   @return [true, false]
      #     Is autoscaling enabled for this node pool.
      # @!attribute [rw] min_node_count
      #   @return [Integer]
      #     Minimum number of nodes in the NodePool. Must be >= 1 and <=
      #     max_node_count.
      # @!attribute [rw] max_node_count
      #   @return [Integer]
      #     Maximum number of nodes in the NodePool. Must be >= min_node_count. There
      #     has to enough quota to scale up the cluster.
      class NodePoolAutoscaling; end

      # SetLabelsRequest sets the Google Cloud Platform labels on a Google Container
      # Engine cluster, which will in turn set them for Google Compute Engine
      # resources used by that cluster
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      # @!attribute [rw] resource_labels
      #   @return [Hash{String => String}]
      #     The labels to set for that cluster.
      # @!attribute [rw] label_fingerprint
      #   @return [String]
      #     The fingerprint of the previous set of labels for this resource,
      #     used to detect conflicts. The fingerprint is initially generated by
      #     Container Engine and changes after every request to modify or update
      #     labels. You must always provide an up-to-date fingerprint hash when
      #     updating or changing labels. Make a <code>get()</code> request to the
      #     resource to get the latest fingerprint.
      class SetLabelsRequest; end

      # SetLegacyAbacRequest enables or disables the ABAC authorization mechanism for
      # a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to update.
      # @!attribute [rw] enabled
      #   @return [true, false]
      #     Whether ABAC authorization will be enabled in the cluster.
      class SetLegacyAbacRequest; end

      # StartIPRotationRequest creates a new IP for the cluster and then performs
      # a node upgrade on each node pool to point to the new IP.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      class StartIPRotationRequest; end

      # CompleteIPRotationRequest moves the cluster master back into single-IP mode.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      class CompleteIPRotationRequest; end

      # AcceleratorConfig represents a Hardware Accelerator request.
      # @!attribute [rw] accelerator_count
      #   @return [Integer]
      #     The number of the accelerator cards exposed to an instance.
      # @!attribute [rw] accelerator_type
      #   @return [String]
      #     The accelerator type resource name. List of supported accelerators
      #     [here](https://cloud.google.com/compute/docs/gpus/#Introduction)
      class AcceleratorConfig; end

      # SetNetworkPolicyRequest enables/disables network policy for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://developers.google.com/console/help/new/#projectnumber).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster.
      # @!attribute [rw] network_policy
      #   @return [Google::Container::V1::NetworkPolicy]
      #     Configuration options for the NetworkPolicy feature.
      class SetNetworkPolicyRequest; end

      # SetMaintenancePolicyRequest sets the maintenance policy for a cluster.
      # @!attribute [rw] project_id
      #   @return [String]
      #     The Google Developers Console [project ID or project
      #     number](https://support.google.com/cloud/answer/6158840).
      # @!attribute [rw] zone
      #   @return [String]
      #     The name of the Google Compute Engine
      #     [zone](https://cloud.google.com/compute/docs/zones#available) in which the cluster
      #     resides.
      # @!attribute [rw] cluster_id
      #   @return [String]
      #     The name of the cluster to update.
      # @!attribute [rw] maintenance_policy
      #   @return [Google::Container::V1::MaintenancePolicy]
      #     The maintenance policy to be set for the cluster. An empty field
      #     clears the existing maintenance policy.
      class SetMaintenancePolicyRequest; end
    end
  end
end