# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Vpc
module V20170312
# AcceptAttachCcnInstances请求参数结构体
class AcceptAttachCcnInstancesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Instances: 接受关联实例列表。
# @type Instances: Array
attr_accessor :CcnId, :Instances
def initialize(ccnid=nil, instances=nil)
@CcnId = ccnid
@Instances = instances
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
end
end
# AcceptAttachCcnInstances返回参数结构体
class AcceptAttachCcnInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 账户属性对象
class AccountAttribute < TencentCloud::Common::AbstractModel
# @param AttributeName: 属性名
# @type AttributeName: String
# @param AttributeValues: 属性值
# @type AttributeValues: Array
attr_accessor :AttributeName, :AttributeValues
def initialize(attributename=nil, attributevalues=nil)
@AttributeName = attributename
@AttributeValues = attributevalues
end
def deserialize(params)
@AttributeName = params['AttributeName']
@AttributeValues = params['AttributeValues']
end
end
# AddBandwidthPackageResources请求参数结构体
class AddBandwidthPackageResourcesRequest < TencentCloud::Common::AbstractModel
# @param ResourceIds: 资源唯一ID，当前支持EIP资源和LB资源，形如'eip-xxxx', 'lb-xxxx'
# @type ResourceIds: Array
# @param BandwidthPackageId: 带宽包唯一标识ID，形如'bwp-xxxx'
# @type BandwidthPackageId: String
# @param NetworkType: 带宽包类型，当前支持'BGP'类型，表示内部资源是BGP IP。
# @type NetworkType: String
# @param ResourceType: 资源类型，包括'Address', 'LoadBalance'
# @type ResourceType: String
# @param Protocol: 带宽包协议类型。当前支持'ipv4'和'ipv6'协议类型。
# @type Protocol: String
attr_accessor :ResourceIds, :BandwidthPackageId, :NetworkType, :ResourceType, :Protocol
def initialize(resourceids=nil, bandwidthpackageid=nil, networktype=nil, resourcetype=nil, protocol=nil)
@ResourceIds = resourceids
@BandwidthPackageId = bandwidthpackageid
@NetworkType = networktype
@ResourceType = resourcetype
@Protocol = protocol
end
def deserialize(params)
@ResourceIds = params['ResourceIds']
@BandwidthPackageId = params['BandwidthPackageId']
@NetworkType = params['NetworkType']
@ResourceType = params['ResourceType']
@Protocol = params['Protocol']
end
end
# AddBandwidthPackageResources返回参数结构体
class AddBandwidthPackageResourcesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddIp6Rules请求参数结构体
class AddIp6RulesRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorId: IPV6转换实例唯一ID，形如ip6-xxxxxxxx
# @type Ip6TranslatorId: String
# @param Ip6RuleInfos: IPV6转换规则信息
# @type Ip6RuleInfos: Array
# @param Ip6RuleName: IPV6转换规则名称
# @type Ip6RuleName: String
attr_accessor :Ip6TranslatorId, :Ip6RuleInfos, :Ip6RuleName
def initialize(ip6translatorid=nil, ip6ruleinfos=nil, ip6rulename=nil)
@Ip6TranslatorId = ip6translatorid
@Ip6RuleInfos = ip6ruleinfos
@Ip6RuleName = ip6rulename
end
def deserialize(params)
@Ip6TranslatorId = params['Ip6TranslatorId']
unless params['Ip6RuleInfos'].nil?
@Ip6RuleInfos = []
params['Ip6RuleInfos'].each do |i|
ip6ruleinfo_tmp = Ip6RuleInfo.new
ip6ruleinfo_tmp.deserialize(i)
@Ip6RuleInfos << ip6ruleinfo_tmp
end
end
@Ip6RuleName = params['Ip6RuleName']
end
end
# AddIp6Rules返回参数结构体
class AddIp6RulesResponse < TencentCloud::Common::AbstractModel
# @param Ip6RuleSet: IPV6转换规则唯一ID数组，形如rule6-xxxxxxxx
# @type Ip6RuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ip6RuleSet, :RequestId
def initialize(ip6ruleset=nil, requestid=nil)
@Ip6RuleSet = ip6ruleset
@RequestId = requestid
end
def deserialize(params)
@Ip6RuleSet = params['Ip6RuleSet']
@RequestId = params['RequestId']
end
end
# AddTemplateMember请求参数结构体
class AddTemplateMemberRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 参数模板实例ID，支持IP地址、协议端口、IP地址组、协议端口组四种参数模板的实例ID。
# @type TemplateId: String
# @param TemplateMember: 需要添加的参数模板成员信息，支持IP地址、协议端口、IP地址组、协议端口组四种类型，类型需要与TemplateId参数类型一致。
# @type TemplateMember: Array
attr_accessor :TemplateId, :TemplateMember
def initialize(templateid=nil, templatemember=nil)
@TemplateId = templateid
@TemplateMember = templatemember
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['TemplateMember'].nil?
@TemplateMember = []
params['TemplateMember'].each do |i|
memberinfo_tmp = MemberInfo.new
memberinfo_tmp.deserialize(i)
@TemplateMember << memberinfo_tmp
end
end
end
end
# AddTemplateMember返回参数结构体
class AddTemplateMemberResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述 EIP 信息
class Address < TencentCloud::Common::AbstractModel
# @param AddressId: `EIP`的`ID`，是`EIP`的唯一标识。
# @type AddressId: String
# @param AddressName: `EIP`名称。
# @type AddressName: String
# @param AddressStatus: `EIP`状态，包含'CREATING'(创建中),'BINDING'(绑定中),'BIND'(已绑定),'UNBINDING'(解绑中),'UNBIND'(已解绑),'OFFLINING'(释放中),'BIND_ENI'(绑定悬空弹性网卡)
# @type AddressStatus: String
# @param AddressIp: 外网IP地址
# @type AddressIp: String
# @param InstanceId: 绑定的资源实例`ID`。可能是一个`CVM`，`NAT`。
# @type InstanceId: String
# @param CreatedTime: 创建时间。按照`ISO8601`标准表示，并且使用`UTC`时间。格式为：`YYYY-MM-DDThh:mm:ssZ`。
# @type CreatedTime: String
# @param NetworkInterfaceId: 绑定的弹性网卡ID
# @type NetworkInterfaceId: String
# @param PrivateAddressIp: 绑定的资源内网ip
# @type PrivateAddressIp: String
# @param IsArrears: 资源隔离状态。true表示eip处于隔离状态，false表示资源处于未隔离状态
# @type IsArrears: Boolean
# @param IsBlocked: 资源封堵状态。true表示eip处于封堵状态，false表示eip处于未封堵状态
# @type IsBlocked: Boolean
# @param IsEipDirectConnection: eip是否支持直通模式。true表示eip支持直通模式，false表示资源不支持直通模式
# @type IsEipDirectConnection: Boolean
# @param AddressType: EIP 资源类型，包括CalcIP、WanIP、EIP和AnycastEIP。其中：CalcIP 表示设备 IP，WanIP 表示普通公网 IP，EIP 表示弹性公网 IP，AnycastEip 表示加速 EIP。
# @type AddressType: String
# @param CascadeRelease: eip是否在解绑后自动释放。true表示eip将会在解绑后自动释放，false表示eip在解绑后不会自动释放
# @type CascadeRelease: Boolean
# @param EipAlgType: EIP ALG开启的协议类型。
# @type EipAlgType: :class:`Tencentcloud::Vpc.v20170312.models.AlgType`
# @param InternetServiceProvider: 弹性公网IP的运营商信息，当前可能返回值包括"CMCC","CTCC","CUCC","BGP"
# @type InternetServiceProvider: String
# @param LocalBgp: 是否本地带宽EIP
# @type LocalBgp: Boolean
# @param Bandwidth: 弹性公网IP的带宽值。注意，传统账户类型账户的弹性公网IP没有带宽属性，值为空。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Bandwidth: Integer
# @param InternetChargeType: 弹性公网IP的网络计费模式。注意，传统账户类型账户的弹性公网IP没有网络计费模式属性，值为空。
# 注意：此字段可能返回 null，表示取不到有效值。
# 包括：
# BANDWIDTH_PREPAID_BY_MONTH
# 表示包月带宽预付费。
# TRAFFIC_POSTPAID_BY_HOUR
# 表示按小时流量后付费。
# BANDWIDTH_POSTPAID_BY_HOUR
# 表示按小时带宽后付费。
# BANDWIDTH_PACKAGE
# 表示共享带宽包。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InternetChargeType: String
# @param TagSet: 弹性公网IP关联的标签列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagSet: Array
attr_accessor :AddressId, :AddressName, :AddressStatus, :AddressIp, :InstanceId, :CreatedTime, :NetworkInterfaceId, :PrivateAddressIp, :IsArrears, :IsBlocked, :IsEipDirectConnection, :AddressType, :CascadeRelease, :EipAlgType, :InternetServiceProvider, :LocalBgp, :Bandwidth, :InternetChargeType, :TagSet
def initialize(addressid=nil, addressname=nil, addressstatus=nil, addressip=nil, instanceid=nil, createdtime=nil, networkinterfaceid=nil, privateaddressip=nil, isarrears=nil, isblocked=nil, iseipdirectconnection=nil, addresstype=nil, cascaderelease=nil, eipalgtype=nil, internetserviceprovider=nil, localbgp=nil, bandwidth=nil, internetchargetype=nil, tagset=nil)
@AddressId = addressid
@AddressName = addressname
@AddressStatus = addressstatus
@AddressIp = addressip
@InstanceId = instanceid
@CreatedTime = createdtime
@NetworkInterfaceId = networkinterfaceid
@PrivateAddressIp = privateaddressip
@IsArrears = isarrears
@IsBlocked = isblocked
@IsEipDirectConnection = iseipdirectconnection
@AddressType = addresstype
@CascadeRelease = cascaderelease
@EipAlgType = eipalgtype
@InternetServiceProvider = internetserviceprovider
@LocalBgp = localbgp
@Bandwidth = bandwidth
@InternetChargeType = internetchargetype
@TagSet = tagset
end
def deserialize(params)
@AddressId = params['AddressId']
@AddressName = params['AddressName']
@AddressStatus = params['AddressStatus']
@AddressIp = params['AddressIp']
@InstanceId = params['InstanceId']
@CreatedTime = params['CreatedTime']
@NetworkInterfaceId = params['NetworkInterfaceId']
@PrivateAddressIp = params['PrivateAddressIp']
@IsArrears = params['IsArrears']
@IsBlocked = params['IsBlocked']
@IsEipDirectConnection = params['IsEipDirectConnection']
@AddressType = params['AddressType']
@CascadeRelease = params['CascadeRelease']
unless params['EipAlgType'].nil?
@EipAlgType = AlgType.new
@EipAlgType.deserialize(params['EipAlgType'])
end
@InternetServiceProvider = params['InternetServiceProvider']
@LocalBgp = params['LocalBgp']
@Bandwidth = params['Bandwidth']
@InternetChargeType = params['InternetChargeType']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
end
end
# 用于描述弹性公网IP的费用对象
class AddressChargePrepaid < TencentCloud::Common::AbstractModel
# @param Period: 购买实例的时长，单位是月。可支持时长：1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 24, 36
# @type Period: Integer
# @param AutoRenewFlag: 自动续费标志。0表示手动续费，1表示自动续费，2表示到期不续费。默认缺省为0即手动续费
# @type AutoRenewFlag: Integer
attr_accessor :Period, :AutoRenewFlag
def initialize(period=nil, autorenewflag=nil)
@Period = period
@AutoRenewFlag = autorenewflag
end
def deserialize(params)
@Period = params['Period']
@AutoRenewFlag = params['AutoRenewFlag']
end
end
# IP地址模板信息
class AddressInfo < TencentCloud::Common::AbstractModel
# @param Address: ip地址。
# @type Address: String
# @param Description: 备注。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
attr_accessor :Address, :Description
def initialize(address=nil, description=nil)
@Address = address
@Description = description
end
def deserialize(params)
@Address = params['Address']
@Description = params['Description']
end
end
# IP地址模板
class AddressTemplate < TencentCloud::Common::AbstractModel
# @param AddressTemplateName: IP地址模板名称。
# @type AddressTemplateName: String
# @param AddressTemplateId: IP地址模板实例唯一ID。
# @type AddressTemplateId: String
# @param AddressSet: IP地址信息。
# @type AddressSet: Array
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param AddressExtraSet: 带备注的IP地址信息。
# @type AddressExtraSet: Array
attr_accessor :AddressTemplateName, :AddressTemplateId, :AddressSet, :CreatedTime, :AddressExtraSet
def initialize(addresstemplatename=nil, addresstemplateid=nil, addressset=nil, createdtime=nil, addressextraset=nil)
@AddressTemplateName = addresstemplatename
@AddressTemplateId = addresstemplateid
@AddressSet = addressset
@CreatedTime = createdtime
@AddressExtraSet = addressextraset
end
def deserialize(params)
@AddressTemplateName = params['AddressTemplateName']
@AddressTemplateId = params['AddressTemplateId']
@AddressSet = params['AddressSet']
@CreatedTime = params['CreatedTime']
unless params['AddressExtraSet'].nil?
@AddressExtraSet = []
params['AddressExtraSet'].each do |i|
addressinfo_tmp = AddressInfo.new
addressinfo_tmp.deserialize(i)
@AddressExtraSet << addressinfo_tmp
end
end
end
end
# IP地址模板集合
class AddressTemplateGroup < TencentCloud::Common::AbstractModel
# @param AddressTemplateGroupName: IP地址模板集合名称。
# @type AddressTemplateGroupName: String
# @param AddressTemplateGroupId: IP地址模板集合实例ID，例如：ipmg-dih8xdbq。
# @type AddressTemplateGroupId: String
# @param AddressTemplateIdSet: IP地址模板ID。
# @type AddressTemplateIdSet: Array
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param AddressTemplateSet: IP地址模板实例。
# @type AddressTemplateSet: Array
attr_accessor :AddressTemplateGroupName, :AddressTemplateGroupId, :AddressTemplateIdSet, :CreatedTime, :AddressTemplateSet
def initialize(addresstemplategroupname=nil, addresstemplategroupid=nil, addresstemplateidset=nil, createdtime=nil, addresstemplateset=nil)
@AddressTemplateGroupName = addresstemplategroupname
@AddressTemplateGroupId = addresstemplategroupid
@AddressTemplateIdSet = addresstemplateidset
@CreatedTime = createdtime
@AddressTemplateSet = addresstemplateset
end
def deserialize(params)
@AddressTemplateGroupName = params['AddressTemplateGroupName']
@AddressTemplateGroupId = params['AddressTemplateGroupId']
@AddressTemplateIdSet = params['AddressTemplateIdSet']
@CreatedTime = params['CreatedTime']
unless params['AddressTemplateSet'].nil?
@AddressTemplateSet = []
params['AddressTemplateSet'].each do |i|
addresstemplateitem_tmp = AddressTemplateItem.new
addresstemplateitem_tmp.deserialize(i)
@AddressTemplateSet << addresstemplateitem_tmp
end
end
end
end
# 地址信息
class AddressTemplateItem < TencentCloud::Common::AbstractModel
# @param From: 起始地址。
# @type From: String
# @param To: 结束地址。
# @type To: String
attr_accessor :From, :To
def initialize(from=nil, to=nil)
@From = from
@To = to
end
def deserialize(params)
@From = params['From']
@To = params['To']
end
end
# IP地址模版
class AddressTemplateSpecification < TencentCloud::Common::AbstractModel
# @param AddressId: IP地址ID，例如：ipm-2uw6ujo6。
# @type AddressId: String
# @param AddressGroupId: IP地址组ID，例如：ipmg-2uw6ujo6。
# @type AddressGroupId: String
attr_accessor :AddressId, :AddressGroupId
def initialize(addressid=nil, addressgroupid=nil)
@AddressId = addressid
@AddressGroupId = addressgroupid
end
def deserialize(params)
@AddressId = params['AddressId']
@AddressGroupId = params['AddressGroupId']
end
end
# ALG协议类型
class AlgType < TencentCloud::Common::AbstractModel
# @param Ftp: Ftp协议Alg功能是否开启
# @type Ftp: Boolean
# @param Sip: Sip协议Alg功能是否开启
# @type Sip: Boolean
attr_accessor :Ftp, :Sip
def initialize(ftp=nil, sip=nil)
@Ftp = ftp
@Sip = sip
end
def deserialize(params)
@Ftp = params['Ftp']
@Sip = params['Sip']
end
end
# AllocateAddresses请求参数结构体
class AllocateAddressesRequest < TencentCloud::Common::AbstractModel
# @param AddressCount: EIP数量。默认值：1。
# @type AddressCount: Integer
# @param InternetServiceProvider: EIP线路类型。默认值：BGP。
# - 已开通静态单线IP白名单的用户，可选值：
- CMCC：中国移动
# - CTCC：中国电信
# - CUCC：中国联通
注意：仅部分地域支持静态单线IP。
# @type InternetServiceProvider: String
# @param InternetChargeType: EIP计费方式。
# - 已开通标准账户类型白名单的用户，可选值：
- BANDWIDTH_PACKAGE：[共享带宽包](https://cloud.tencent.com/document/product/684/15255)付费（需额外开通共享带宽包白名单）
# - BANDWIDTH_POSTPAID_BY_HOUR：带宽按小时后付费
# - BANDWIDTH_PREPAID_BY_MONTH：包月按带宽预付费
# - TRAFFIC_POSTPAID_BY_HOUR：流量按小时后付费
默认值：TRAFFIC_POSTPAID_BY_HOUR。
# - 未开通标准账户类型白名单的用户，EIP计费方式与其绑定的实例的计费方式一致，无需传递此参数。
# @type InternetChargeType: String
# @param InternetMaxBandwidthOut: EIP出带宽上限，单位：Mbps。
# - 已开通标准账户类型白名单的用户，可选值范围取决于EIP计费方式：
- BANDWIDTH_PACKAGE：1 Mbps 至 1000 Mbps
# - BANDWIDTH_POSTPAID_BY_HOUR：1 Mbps 至 100 Mbps
# - BANDWIDTH_PREPAID_BY_MONTH：1 Mbps 至 200 Mbps
# - TRAFFIC_POSTPAID_BY_HOUR：1 Mbps 至 100 Mbps
默认值：1 Mbps。
# - 未开通标准账户类型白名单的用户，EIP出带宽上限取决于与其绑定的实例的公网出带宽上限，无需传递此参数。
# @type InternetMaxBandwidthOut: Integer
# @param AddressChargePrepaid: 包月按带宽预付费EIP的计费参数。EIP为包月按带宽预付费时，该参数必传，其余场景不需传递
# @type AddressChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.AddressChargePrepaid`
# @param AddressType: EIP类型。默认值：EIP。
# - 已开通Anycast公网加速白名单的用户，可选值：
- AnycastEIP：加速IP，可参见 [Anycast 公网加速](https://cloud.tencent.com/document/product/644)
注意：仅部分地域支持加速IP。
# - 已开通精品IP白名单的用户，可选值：注意：仅部分地域支持精品IP。
# @type AddressType: String
# @param AnycastZone: Anycast发布域。
# - 已开通Anycast公网加速白名单的用户，可选值：
- ANYCAST_ZONE_GLOBAL：全球发布域（需要额外开通Anycast全球加速白名单）
- ANYCAST_ZONE_OVERSEAS：境外发布域
- [已废弃] ANYCAST_ZONE_A：发布域A（已更新为全球发布域）
- [已废弃] ANYCAST_ZONE_B：发布域B（已更新为全球发布域）
默认值：ANYCAST_ZONE_OVERSEAS。
# @type AnycastZone: String
# @param ApplicableForCLB: [已废弃] AnycastEIP不再区分是否负载均衡。原参数说明如下：
# AnycastEIP是否用于绑定负载均衡。
# - 已开通Anycast公网加速白名单的用户，可选值：
- TRUE：AnycastEIP可绑定对象为负载均衡
# - FALSE：AnycastEIP可绑定对象为云服务器、NAT网关、高可用虚拟IP等
默认值：FALSE。
# @type ApplicableForCLB: Boolean
# @param Tags: 需要关联的标签列表。
# @type Tags: Array
# @param BandwidthPackageId: BGP带宽包唯一ID参数。设定该参数且InternetChargeType为BANDWIDTH_PACKAGE，则表示创建的EIP加入该BGP带宽包并采用带宽包计费
# @type BandwidthPackageId: String
# @param AddressName: EIP名称，用于申请EIP时用户自定义该EIP的个性化名称，默认值：未命名
# @type AddressName: String
attr_accessor :AddressCount, :InternetServiceProvider, :InternetChargeType, :InternetMaxBandwidthOut, :AddressChargePrepaid, :AddressType, :AnycastZone, :ApplicableForCLB, :Tags, :BandwidthPackageId, :AddressName
def initialize(addresscount=nil, internetserviceprovider=nil, internetchargetype=nil, internetmaxbandwidthout=nil, addresschargeprepaid=nil, addresstype=nil, anycastzone=nil, applicableforclb=nil, tags=nil, bandwidthpackageid=nil, addressname=nil)
@AddressCount = addresscount
@InternetServiceProvider = internetserviceprovider
@InternetChargeType = internetchargetype
@InternetMaxBandwidthOut = internetmaxbandwidthout
@AddressChargePrepaid = addresschargeprepaid
@AddressType = addresstype
@AnycastZone = anycastzone
@ApplicableForCLB = applicableforclb
@Tags = tags
@BandwidthPackageId = bandwidthpackageid
@AddressName = addressname
end
def deserialize(params)
@AddressCount = params['AddressCount']
@InternetServiceProvider = params['InternetServiceProvider']
@InternetChargeType = params['InternetChargeType']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
unless params['AddressChargePrepaid'].nil?
@AddressChargePrepaid = AddressChargePrepaid.new
@AddressChargePrepaid.deserialize(params['AddressChargePrepaid'])
end
@AddressType = params['AddressType']
@AnycastZone = params['AnycastZone']
@ApplicableForCLB = params['ApplicableForCLB']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@BandwidthPackageId = params['BandwidthPackageId']
@AddressName = params['AddressName']
end
end
# AllocateAddresses返回参数结构体
class AllocateAddressesResponse < TencentCloud::Common::AbstractModel
# @param AddressSet: 申请到的 EIP 的唯一 ID 列表。
# @type AddressSet: Array
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AddressSet, :TaskId, :RequestId
def initialize(addressset=nil, taskid=nil, requestid=nil)
@AddressSet = addressset
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@AddressSet = params['AddressSet']
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# AllocateIp6AddressesBandwidth请求参数结构体
class AllocateIp6AddressesBandwidthRequest < TencentCloud::Common::AbstractModel
# @param Ip6Addresses: 需要开通公网访问能力的IPV6地址
# @type Ip6Addresses: Array
# @param InternetMaxBandwidthOut: 带宽，单位Mbps。默认是1Mbps
# @type InternetMaxBandwidthOut: Integer
# @param InternetChargeType: 网络计费模式。IPV6当前对标准账户类型支持"TRAFFIC_POSTPAID_BY_HOUR"，对传统账户类型支持"BANDWIDTH_PACKAGE"。默认网络计费模式是"TRAFFIC_POSTPAID_BY_HOUR"。
# @type InternetChargeType: String
# @param BandwidthPackageId: 带宽包id，上移账号，申请带宽包计费模式的ipv6地址需要传入.
# @type BandwidthPackageId: String
attr_accessor :Ip6Addresses, :InternetMaxBandwidthOut, :InternetChargeType, :BandwidthPackageId
def initialize(ip6addresses=nil, internetmaxbandwidthout=nil, internetchargetype=nil, bandwidthpackageid=nil)
@Ip6Addresses = ip6addresses
@InternetMaxBandwidthOut = internetmaxbandwidthout
@InternetChargeType = internetchargetype
@BandwidthPackageId = bandwidthpackageid
end
def deserialize(params)
@Ip6Addresses = params['Ip6Addresses']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@InternetChargeType = params['InternetChargeType']
@BandwidthPackageId = params['BandwidthPackageId']
end
end
# AllocateIp6AddressesBandwidth返回参数结构体
class AllocateIp6AddressesBandwidthResponse < TencentCloud::Common::AbstractModel
# @param AddressSet: 弹性公网 IPV6 的唯一 ID 列表。
# @type AddressSet: Array
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AddressSet, :TaskId, :RequestId
def initialize(addressset=nil, taskid=nil, requestid=nil)
@AddressSet = addressset
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@AddressSet = params['AddressSet']
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# AssignIpv6Addresses请求参数结构体
class AssignIpv6AddressesRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例`ID`，形如：`eni-m6dyj72l`。
# @type NetworkInterfaceId: String
# @param Ipv6Addresses: 指定的`IPv6`地址列表，单次最多指定10个。与入参`Ipv6AddressCount`合并计算配额。与Ipv6AddressCount必填一个。
# @type Ipv6Addresses: Array
# @param Ipv6AddressCount: 自动分配`IPv6`地址个数，内网IP地址个数总和不能超过配数。与入参`Ipv6Addresses`合并计算配额。与Ipv6Addresses必填一个。
# @type Ipv6AddressCount: Integer
attr_accessor :NetworkInterfaceId, :Ipv6Addresses, :Ipv6AddressCount
def initialize(networkinterfaceid=nil, ipv6addresses=nil, ipv6addresscount=nil)
@NetworkInterfaceId = networkinterfaceid
@Ipv6Addresses = ipv6addresses
@Ipv6AddressCount = ipv6addresscount
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['Ipv6Addresses'].nil?
@Ipv6Addresses = []
params['Ipv6Addresses'].each do |i|
ipv6address_tmp = Ipv6Address.new
ipv6address_tmp.deserialize(i)
@Ipv6Addresses << ipv6address_tmp
end
end
@Ipv6AddressCount = params['Ipv6AddressCount']
end
end
# AssignIpv6Addresses返回参数结构体
class AssignIpv6AddressesResponse < TencentCloud::Common::AbstractModel
# @param Ipv6AddressSet: 分配给弹性网卡的`IPv6`地址列表。
# @type Ipv6AddressSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ipv6AddressSet, :RequestId
def initialize(ipv6addressset=nil, requestid=nil)
@Ipv6AddressSet = ipv6addressset
@RequestId = requestid
end
def deserialize(params)
unless params['Ipv6AddressSet'].nil?
@Ipv6AddressSet = []
params['Ipv6AddressSet'].each do |i|
ipv6address_tmp = Ipv6Address.new
ipv6address_tmp.deserialize(i)
@Ipv6AddressSet << ipv6address_tmp
end
end
@RequestId = params['RequestId']
end
end
# AssignIpv6CidrBlock请求参数结构体
class AssignIpv6CidrBlockRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`，形如：`vpc-f49l6u0z`。
# @type VpcId: String
attr_accessor :VpcId
def initialize(vpcid=nil)
@VpcId = vpcid
end
def deserialize(params)
@VpcId = params['VpcId']
end
end
# AssignIpv6CidrBlock返回参数结构体
class AssignIpv6CidrBlockResponse < TencentCloud::Common::AbstractModel
# @param Ipv6CidrBlock: 分配的 `IPv6` 网段。形如：`3402:4e00:20:1000::/56`
# @type Ipv6CidrBlock: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ipv6CidrBlock, :RequestId
def initialize(ipv6cidrblock=nil, requestid=nil)
@Ipv6CidrBlock = ipv6cidrblock
@RequestId = requestid
end
def deserialize(params)
@Ipv6CidrBlock = params['Ipv6CidrBlock']
@RequestId = params['RequestId']
end
end
# AssignIpv6SubnetCidrBlock请求参数结构体
class AssignIpv6SubnetCidrBlockRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 子网所在私有网络`ID`。形如：`vpc-f49l6u0z`。
# @type VpcId: String
# @param Ipv6SubnetCidrBlocks: 分配 `IPv6` 子网段列表。
# @type Ipv6SubnetCidrBlocks: Array
attr_accessor :VpcId, :Ipv6SubnetCidrBlocks
def initialize(vpcid=nil, ipv6subnetcidrblocks=nil)
@VpcId = vpcid
@Ipv6SubnetCidrBlocks = ipv6subnetcidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
unless params['Ipv6SubnetCidrBlocks'].nil?
@Ipv6SubnetCidrBlocks = []
params['Ipv6SubnetCidrBlocks'].each do |i|
ipv6subnetcidrblock_tmp = Ipv6SubnetCidrBlock.new
ipv6subnetcidrblock_tmp.deserialize(i)
@Ipv6SubnetCidrBlocks << ipv6subnetcidrblock_tmp
end
end
end
end
# AssignIpv6SubnetCidrBlock返回参数结构体
class AssignIpv6SubnetCidrBlockResponse < TencentCloud::Common::AbstractModel
# @param Ipv6SubnetCidrBlockSet: 分配 `IPv6` 子网段列表。
# @type Ipv6SubnetCidrBlockSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ipv6SubnetCidrBlockSet, :RequestId
def initialize(ipv6subnetcidrblockset=nil, requestid=nil)
@Ipv6SubnetCidrBlockSet = ipv6subnetcidrblockset
@RequestId = requestid
end
def deserialize(params)
unless params['Ipv6SubnetCidrBlockSet'].nil?
@Ipv6SubnetCidrBlockSet = []
params['Ipv6SubnetCidrBlockSet'].each do |i|
ipv6subnetcidrblock_tmp = Ipv6SubnetCidrBlock.new
ipv6subnetcidrblock_tmp.deserialize(i)
@Ipv6SubnetCidrBlockSet << ipv6subnetcidrblock_tmp
end
end
@RequestId = params['RequestId']
end
end
# AssignPrivateIpAddresses请求参数结构体
class AssignPrivateIpAddressesRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param PrivateIpAddresses: 指定的内网IP信息，单次最多指定10个。与SecondaryPrivateIpAddressCount至少提供一个。
# @type PrivateIpAddresses: Array
# @param SecondaryPrivateIpAddressCount: 新申请的内网IP地址个数，与PrivateIpAddresses至少提供一个。内网IP地址个数总和不能超过配额数，详见弹性网卡使用限制。
# @type SecondaryPrivateIpAddressCount: Integer
attr_accessor :NetworkInterfaceId, :PrivateIpAddresses, :SecondaryPrivateIpAddressCount
def initialize(networkinterfaceid=nil, privateipaddresses=nil, secondaryprivateipaddresscount=nil)
@NetworkInterfaceId = networkinterfaceid
@PrivateIpAddresses = privateipaddresses
@SecondaryPrivateIpAddressCount = secondaryprivateipaddresscount
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['PrivateIpAddresses'].nil?
@PrivateIpAddresses = []
params['PrivateIpAddresses'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddresses << privateipaddressspecification_tmp
end
end
@SecondaryPrivateIpAddressCount = params['SecondaryPrivateIpAddressCount']
end
end
# AssignPrivateIpAddresses返回参数结构体
class AssignPrivateIpAddressesResponse < TencentCloud::Common::AbstractModel
# @param PrivateIpAddressSet: 内网IP详细信息。
# @type PrivateIpAddressSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PrivateIpAddressSet, :RequestId
def initialize(privateipaddressset=nil, requestid=nil)
@PrivateIpAddressSet = privateipaddressset
@RequestId = requestid
end
def deserialize(params)
unless params['PrivateIpAddressSet'].nil?
@PrivateIpAddressSet = []
params['PrivateIpAddressSet'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddressSet << privateipaddressspecification_tmp
end
end
@RequestId = params['RequestId']
end
end
# VPC辅助CIDR信息。
class AssistantCidr < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param CidrBlock: 辅助CIDR。形如：`172.16.0.0/16`
# @type CidrBlock: String
# @param AssistantType: 辅助CIDR类型（0：普通辅助CIDR，1：容器辅助CIDR），默认都是0。
# @type AssistantType: Integer
# @param SubnetSet: 辅助CIDR拆分的子网。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetSet: Array
attr_accessor :VpcId, :CidrBlock, :AssistantType, :SubnetSet
def initialize(vpcid=nil, cidrblock=nil, assistanttype=nil, subnetset=nil)
@VpcId = vpcid
@CidrBlock = cidrblock
@AssistantType = assistanttype
@SubnetSet = subnetset
end
def deserialize(params)
@VpcId = params['VpcId']
@CidrBlock = params['CidrBlock']
@AssistantType = params['AssistantType']
unless params['SubnetSet'].nil?
@SubnetSet = []
params['SubnetSet'].each do |i|
subnet_tmp = Subnet.new
subnet_tmp.deserialize(i)
@SubnetSet << subnet_tmp
end
end
end
end
# AssociateAddress请求参数结构体
class AssociateAddressRequest < TencentCloud::Common::AbstractModel
# @param AddressId: 标识 EIP 的唯一 ID。EIP 唯一 ID 形如：`eip-11112222`。
# @type AddressId: String
# @param InstanceId: 要绑定的实例 ID。实例 ID 形如：`ins-11112222`。可通过登录[控制台](https://console.cloud.tencent.com/cvm)查询，也可通过 [DescribeInstances](https://cloud.tencent.com/document/api/213/15728) 接口返回值中的`InstanceId`获取。
# @type InstanceId: String
# @param NetworkInterfaceId: 要绑定的弹性网卡 ID。 弹性网卡 ID 形如：`eni-11112222`。`NetworkInterfaceId` 与 `InstanceId` 不可同时指定。弹性网卡 ID 可通过登录[控制台](https://console.cloud.tencent.com/vpc/eni)查询，也可通过[DescribeNetworkInterfaces](https://cloud.tencent.com/document/api/215/15817)接口返回值中的`networkInterfaceId`获取。
# @type NetworkInterfaceId: String
# @param PrivateIpAddress: 要绑定的内网 IP。如果指定了 `NetworkInterfaceId` 则也必须指定 `PrivateIpAddress` ，表示将 EIP 绑定到指定弹性网卡的指定内网 IP 上。同时要确保指定的 `PrivateIpAddress` 是指定的 `NetworkInterfaceId` 上的一个内网 IP。指定弹性网卡的内网 IP 可通过登录[控制台](https://console.cloud.tencent.com/vpc/eni)查询，也可通过[DescribeNetworkInterfaces](https://cloud.tencent.com/document/api/215/15817)接口返回值中的`privateIpAddress`获取。
# @type PrivateIpAddress: String
# @param EipDirectConnection: 指定绑定时是否设置直通。弹性公网 IP 直通请参见 [EIP 直通](https://cloud.tencent.com/document/product/1199/41709)。取值：True、False，默认值为 False。当绑定 CVM 实例、EKS 弹性集群时，可设定此参数为 True。此参数目前处于内测中，如需使用，请提交 [工单申请](https://console.cloud.tencent.com/workorder/category?level1_id=6&level2_id=163&source=0&data_title=%E8%B4%9F%E8%BD%BD%E5%9D%87%E8%A1%A1%20CLB&level3_id=1071&queue=96&scene_code=34639&step=2)。
# @type EipDirectConnection: Boolean
attr_accessor :AddressId, :InstanceId, :NetworkInterfaceId, :PrivateIpAddress, :EipDirectConnection
def initialize(addressid=nil, instanceid=nil, networkinterfaceid=nil, privateipaddress=nil, eipdirectconnection=nil)
@AddressId = addressid
@InstanceId = instanceid
@NetworkInterfaceId = networkinterfaceid
@PrivateIpAddress = privateipaddress
@EipDirectConnection = eipdirectconnection
end
def deserialize(params)
@AddressId = params['AddressId']
@InstanceId = params['InstanceId']
@NetworkInterfaceId = params['NetworkInterfaceId']
@PrivateIpAddress = params['PrivateIpAddress']
@EipDirectConnection = params['EipDirectConnection']
end
end
# AssociateAddress返回参数结构体
class AssociateAddressResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# AssociateDhcpIpWithAddressIp请求参数结构体
class AssociateDhcpIpWithAddressIpRequest < TencentCloud::Common::AbstractModel
# @param DhcpIpId: `DhcpIp`唯一`ID`，形如：`dhcpip-9o233uri`。必须是没有绑定`EIP`的`DhcpIp`
# @type DhcpIpId: String
# @param AddressIp: 弹性公网`IP`。必须是没有绑定`DhcpIp`的`EIP`
# @type AddressIp: String
attr_accessor :DhcpIpId, :AddressIp
def initialize(dhcpipid=nil, addressip=nil)
@DhcpIpId = dhcpipid
@AddressIp = addressip
end
def deserialize(params)
@DhcpIpId = params['DhcpIpId']
@AddressIp = params['AddressIp']
end
end
# AssociateDhcpIpWithAddressIp返回参数结构体
class AssociateDhcpIpWithAddressIpResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AssociateDirectConnectGatewayNatGateway请求参数结构体
class AssociateDirectConnectGatewayNatGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 专线网关ID。
# @type VpcId: String
# @param NatGatewayId: NAT网关ID。
# @type NatGatewayId: String
# @param DirectConnectGatewayId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type DirectConnectGatewayId: String
attr_accessor :VpcId, :NatGatewayId, :DirectConnectGatewayId
def initialize(vpcid=nil, natgatewayid=nil, directconnectgatewayid=nil)
@VpcId = vpcid
@NatGatewayId = natgatewayid
@DirectConnectGatewayId = directconnectgatewayid
end
def deserialize(params)
@VpcId = params['VpcId']
@NatGatewayId = params['NatGatewayId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
end
end
# AssociateDirectConnectGatewayNatGateway返回参数结构体
class AssociateDirectConnectGatewayNatGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AssociateNatGatewayAddress请求参数结构体
class AssociateNatGatewayAddressRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param AddressCount: 需要申请的弹性IP个数，系统会按您的要求生产N个弹性IP, 其中AddressCount和PublicAddresses至少传递一个。
# @type AddressCount: Integer
# @param PublicIpAddresses: 绑定NAT网关的弹性IP数组，其中AddressCount和PublicAddresses至少传递一个。
# @type PublicIpAddresses: Array
# @param Zone: 弹性IP可用区，自动分配弹性IP时传递。
# @type Zone: String
attr_accessor :NatGatewayId, :AddressCount, :PublicIpAddresses, :Zone
def initialize(natgatewayid=nil, addresscount=nil, publicipaddresses=nil, zone=nil)
@NatGatewayId = natgatewayid
@AddressCount = addresscount
@PublicIpAddresses = publicipaddresses
@Zone = zone
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@AddressCount = params['AddressCount']
@PublicIpAddresses = params['PublicIpAddresses']
@Zone = params['Zone']
end
end
# AssociateNatGatewayAddress返回参数结构体
class AssociateNatGatewayAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AssociateNetworkAclSubnets请求参数结构体
class AssociateNetworkAclSubnetsRequest < TencentCloud::Common::AbstractModel
# @param NetworkAclId: 网络ACL实例ID。例如：acl-12345678。
# @type NetworkAclId: String
# @param SubnetIds: 子网实例ID数组。例如：[subnet-12345678]
# @type SubnetIds: Array
attr_accessor :NetworkAclId, :SubnetIds
def initialize(networkaclid=nil, subnetids=nil)
@NetworkAclId = networkaclid
@SubnetIds = subnetids
end
def deserialize(params)
@NetworkAclId = params['NetworkAclId']
@SubnetIds = params['SubnetIds']
end
end
# AssociateNetworkAclSubnets返回参数结构体
class AssociateNetworkAclSubnetsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AssociateNetworkInterfaceSecurityGroups请求参数结构体
class AssociateNetworkInterfaceSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceIds: 弹性网卡实例ID。形如：eni-pxir56ns。每次请求的实例的上限为100。
# @type NetworkInterfaceIds: Array
# @param SecurityGroupIds: 安全组实例ID，例如：sg-33ocnj9n，可通过DescribeSecurityGroups获取。每次请求的实例的上限为100。
# @type SecurityGroupIds: Array
attr_accessor :NetworkInterfaceIds, :SecurityGroupIds
def initialize(networkinterfaceids=nil, securitygroupids=nil)
@NetworkInterfaceIds = networkinterfaceids
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@NetworkInterfaceIds = params['NetworkInterfaceIds']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# AssociateNetworkInterfaceSecurityGroups返回参数结构体
class AssociateNetworkInterfaceSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AttachCcnInstances请求参数结构体
class AttachCcnInstancesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Instances: 关联网络实例列表
# @type Instances: Array
# @param CcnUin: CCN所属UIN（根账号），默认当前账号所属UIN
# @type CcnUin: String
attr_accessor :CcnId, :Instances, :CcnUin
def initialize(ccnid=nil, instances=nil, ccnuin=nil)
@CcnId = ccnid
@Instances = instances
@CcnUin = ccnuin
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
@CcnUin = params['CcnUin']
end
end
# AttachCcnInstances返回参数结构体
class AttachCcnInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AttachClassicLinkVpc请求参数结构体
class AttachClassicLinkVpcRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID
# @type VpcId: String
# @param InstanceIds: CVM实例ID
# @type InstanceIds: Array
attr_accessor :VpcId, :InstanceIds
def initialize(vpcid=nil, instanceids=nil)
@VpcId = vpcid
@InstanceIds = instanceids
end
def deserialize(params)
@VpcId = params['VpcId']
@InstanceIds = params['InstanceIds']
end
end
# AttachClassicLinkVpc返回参数结构体
class AttachClassicLinkVpcResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AttachNetworkInterface请求参数结构体
class AttachNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param InstanceId: CVM实例ID。形如：ins-r8hr2upy。
# @type InstanceId: String
# @param AttachType: 网卡的挂载类型：0 标准型，1扩展型，默认值0。
# @type AttachType: Integer
attr_accessor :NetworkInterfaceId, :InstanceId, :AttachType
def initialize(networkinterfaceid=nil, instanceid=nil, attachtype=nil)
@NetworkInterfaceId = networkinterfaceid
@InstanceId = instanceid
@AttachType = attachtype
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
@InstanceId = params['InstanceId']
@AttachType = params['AttachType']
end
end
# AttachNetworkInterface返回参数结构体
class AttachNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AuditCrossBorderCompliance请求参数结构体
class AuditCrossBorderComplianceRequest < TencentCloud::Common::AbstractModel
# @param ServiceProvider: 服务商, 可选值：`UNICOM`。
# @type ServiceProvider: String
# @param ComplianceId: 表单唯一`ID`。
# @type ComplianceId: Integer
# @param AuditBehavior: 通过：`APPROVED `，拒绝：`DENY`。
# @type AuditBehavior: String
attr_accessor :ServiceProvider, :ComplianceId, :AuditBehavior
def initialize(serviceprovider=nil, complianceid=nil, auditbehavior=nil)
@ServiceProvider = serviceprovider
@ComplianceId = complianceid
@AuditBehavior = auditbehavior
end
def deserialize(params)
@ServiceProvider = params['ServiceProvider']
@ComplianceId = params['ComplianceId']
@AuditBehavior = params['AuditBehavior']
end
end
# AuditCrossBorderCompliance返回参数结构体
class AuditCrossBorderComplianceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述带宽包信息的结构
class BandwidthPackage < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 带宽包唯一标识Id
# @type BandwidthPackageId: String
# @param NetworkType: 带宽包类型，包括'BGP','SINGLEISP','ANYCAST'
# @type NetworkType: String
# @param ChargeType: 带宽包计费类型，包括'TOP5_POSTPAID_BY_MONTH'和'PERCENT95_POSTPAID_BY_MONTH'
# @type ChargeType: String
# @param BandwidthPackageName: 带宽包名称
# @type BandwidthPackageName: String
# @param CreatedTime: 带宽包创建时间。按照`ISO8601`标准表示，并且使用`UTC`时间。格式为：`YYYY-MM-DDThh:mm:ssZ`。
# @type CreatedTime: String
# @param Status: 带宽包状态，包括'CREATING','CREATED','DELETING','DELETED'
# @type Status: String
# @param ResourceSet: 带宽包资源信息
# @type ResourceSet: Array
# @param Bandwidth: 带宽包限速大小。单位：Mbps，-1表示不限速。
# @type Bandwidth: Integer
attr_accessor :BandwidthPackageId, :NetworkType, :ChargeType, :BandwidthPackageName, :CreatedTime, :Status, :ResourceSet, :Bandwidth
def initialize(bandwidthpackageid=nil, networktype=nil, chargetype=nil, bandwidthpackagename=nil, createdtime=nil, status=nil, resourceset=nil, bandwidth=nil)
@BandwidthPackageId = bandwidthpackageid
@NetworkType = networktype
@ChargeType = chargetype
@BandwidthPackageName = bandwidthpackagename
@CreatedTime = createdtime
@Status = status
@ResourceSet = resourceset
@Bandwidth = bandwidth
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
@NetworkType = params['NetworkType']
@ChargeType = params['ChargeType']
@BandwidthPackageName = params['BandwidthPackageName']
@CreatedTime = params['CreatedTime']
@Status = params['Status']
unless params['ResourceSet'].nil?
@ResourceSet = []
params['ResourceSet'].each do |i|
resource_tmp = Resource.new
resource_tmp.deserialize(i)
@ResourceSet << resource_tmp
end
end
@Bandwidth = params['Bandwidth']
end
end
# 后付费共享带宽包的当前计费用量
class BandwidthPackageBillBandwidth < TencentCloud::Common::AbstractModel
# @param BandwidthUsage: 当前计费用量，单位为 Mbps
# @type BandwidthUsage: Integer
attr_accessor :BandwidthUsage
def initialize(bandwidthusage=nil)
@BandwidthUsage = bandwidthusage
end
def deserialize(params)
@BandwidthUsage = params['BandwidthUsage']
end
end
# 云联网（CCN）对象
class CCN < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网唯一ID
# @type CcnId: String
# @param CcnName: 云联网名称
# @type CcnName: String
# @param CcnDescription: 云联网描述信息
# @type CcnDescription: String
# @param InstanceCount: 关联实例数量
# @type InstanceCount: Integer
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param State: 实例状态， 'ISOLATED': 隔离中（欠费停服），'AVAILABLE'：运行中。
# @type State: String
# @param QosLevel: 实例服务质量，’PT’：白金，'AU'：金，'AG'：银。
# @type QosLevel: String
# @param InstanceChargeType: 付费类型，PREPAID为预付费，POSTPAID为后付费。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceChargeType: String
# @param BandwidthLimitType: 限速类型，INTER_REGION_LIMIT为地域间限速；OUTER_REGION_LIMIT为地域出口限速。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BandwidthLimitType: String
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param RoutePriorityFlag: 是否支持云联网路由优先级的功能。False：不支持，True：支持。
# @type RoutePriorityFlag: Boolean
# @param RouteTableCount: 实例关联的路由表个数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableCount: Integer
# @param RouteTableFlag: 是否开启云联网多路由表特性。False：未开启，True：开启。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableFlag: Boolean
attr_accessor :CcnId, :CcnName, :CcnDescription, :InstanceCount, :CreateTime, :State, :QosLevel, :InstanceChargeType, :BandwidthLimitType, :TagSet, :RoutePriorityFlag, :RouteTableCount, :RouteTableFlag
def initialize(ccnid=nil, ccnname=nil, ccndescription=nil, instancecount=nil, createtime=nil, state=nil, qoslevel=nil, instancechargetype=nil, bandwidthlimittype=nil, tagset=nil, routepriorityflag=nil, routetablecount=nil, routetableflag=nil)
@CcnId = ccnid
@CcnName = ccnname
@CcnDescription = ccndescription
@InstanceCount = instancecount
@CreateTime = createtime
@State = state
@QosLevel = qoslevel
@InstanceChargeType = instancechargetype
@BandwidthLimitType = bandwidthlimittype
@TagSet = tagset
@RoutePriorityFlag = routepriorityflag
@RouteTableCount = routetablecount
@RouteTableFlag = routetableflag
end
def deserialize(params)
@CcnId = params['CcnId']
@CcnName = params['CcnName']
@CcnDescription = params['CcnDescription']
@InstanceCount = params['InstanceCount']
@CreateTime = params['CreateTime']
@State = params['State']
@QosLevel = params['QosLevel']
@InstanceChargeType = params['InstanceChargeType']
@BandwidthLimitType = params['BandwidthLimitType']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@RoutePriorityFlag = params['RoutePriorityFlag']
@RouteTableCount = params['RouteTableCount']
@RouteTableFlag = params['RouteTableFlag']
end
end
# 云联网（CCN）关联实例（Instance）对象
class CcnAttachedInstance < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网实例ID。
# @type CcnId: String
# @param InstanceType: 关联实例类型：
# `VPC`：私有网络
# `DIRECTCONNECT`：专线网关
# `BMVPC`：黑石私有网络
# @type InstanceType: String
# @param InstanceId: 关联实例ID。
# @type InstanceId: String
# @param InstanceName: 关联实例名称。
# @type InstanceName: String
# @param InstanceRegion: 关联实例所属大区，例如：ap-guangzhou。
# @type InstanceRegion: String
# @param InstanceUin: 关联实例所属UIN（根账号）。
# @type InstanceUin: String
# @param CidrBlock: 关联实例CIDR。
# @type CidrBlock: Array
# @param State: 关联实例状态：
# `PENDING`：申请中
# `ACTIVE`：已连接
# `EXPIRED`：已过期
# `REJECTED`：已拒绝
# `DELETED`：已删除
# `FAILED`：失败的（2小时后将异步强制解关联）
# `ATTACHING`：关联中
# `DETACHING`：解关联中
# `DETACHFAILED`：解关联失败（2小时后将异步强制解关联）
# @type State: String
# @param AttachedTime: 关联时间。
# @type AttachedTime: String
# @param CcnUin: 云联网所属UIN（根账号）。
# @type CcnUin: String
# @param InstanceArea: 关联实例所属的大地域，如: CHINA_MAINLAND
# @type InstanceArea: String
# @param Description: 备注
# @type Description: String
# @param RouteTableId: 路由表ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableId: String
# @param RouteTableName: 路由表名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableName: String
attr_accessor :CcnId, :InstanceType, :InstanceId, :InstanceName, :InstanceRegion, :InstanceUin, :CidrBlock, :State, :AttachedTime, :CcnUin, :InstanceArea, :Description, :RouteTableId, :RouteTableName
def initialize(ccnid=nil, instancetype=nil, instanceid=nil, instancename=nil, instanceregion=nil, instanceuin=nil, cidrblock=nil, state=nil, attachedtime=nil, ccnuin=nil, instancearea=nil, description=nil, routetableid=nil, routetablename=nil)
@CcnId = ccnid
@InstanceType = instancetype
@InstanceId = instanceid
@InstanceName = instancename
@InstanceRegion = instanceregion
@InstanceUin = instanceuin
@CidrBlock = cidrblock
@State = state
@AttachedTime = attachedtime
@CcnUin = ccnuin
@InstanceArea = instancearea
@Description = description
@RouteTableId = routetableid
@RouteTableName = routetablename
end
def deserialize(params)
@CcnId = params['CcnId']
@InstanceType = params['InstanceType']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceRegion = params['InstanceRegion']
@InstanceUin = params['InstanceUin']
@CidrBlock = params['CidrBlock']
@State = params['State']
@AttachedTime = params['AttachedTime']
@CcnUin = params['CcnUin']
@InstanceArea = params['InstanceArea']
@Description = params['Description']
@RouteTableId = params['RouteTableId']
@RouteTableName = params['RouteTableName']
end
end
# 用于描述云联网地域间限速带宽实例的信息。
class CcnBandwidthInfo < TencentCloud::Common::AbstractModel
# @param CcnId: 带宽所属的云联网ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CcnId: String
# @param CreatedTime: 实例的创建时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param ExpiredTime: 实例的过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpiredTime: String
# @param RegionFlowControlId: 带宽实例的唯一ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionFlowControlId: String
# @param RenewFlag: 带宽是否自动续费的标记。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RenewFlag: String
# @param CcnRegionBandwidthLimit: 描述带宽的地域和限速上限信息。在地域间限速的情况下才会返回参数，出口限速模式不返回。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CcnRegionBandwidthLimit: :class:`Tencentcloud::Vpc.v20170312.models.CcnRegionBandwidthLimit`
attr_accessor :CcnId, :CreatedTime, :ExpiredTime, :RegionFlowControlId, :RenewFlag, :CcnRegionBandwidthLimit
def initialize(ccnid=nil, createdtime=nil, expiredtime=nil, regionflowcontrolid=nil, renewflag=nil, ccnregionbandwidthlimit=nil)
@CcnId = ccnid
@CreatedTime = createdtime
@ExpiredTime = expiredtime
@RegionFlowControlId = regionflowcontrolid
@RenewFlag = renewflag
@CcnRegionBandwidthLimit = ccnregionbandwidthlimit
end
def deserialize(params)
@CcnId = params['CcnId']
@CreatedTime = params['CreatedTime']
@ExpiredTime = params['ExpiredTime']
@RegionFlowControlId = params['RegionFlowControlId']
@RenewFlag = params['RenewFlag']
unless params['CcnRegionBandwidthLimit'].nil?
@CcnRegionBandwidthLimit = CcnRegionBandwidthLimit.new
@CcnRegionBandwidthLimit.deserialize(params['CcnRegionBandwidthLimit'])
end
end
end
# 云联网（CCN）关联实例（Instance）对象。
class CcnInstance < TencentCloud::Common::AbstractModel
# @param InstanceId: 关联实例ID。
# @type InstanceId: String
# @param InstanceRegion: 关联实例ID所属大区，例如：ap-guangzhou。
# @type InstanceRegion: String
# @param InstanceType: 关联实例类型，可选值：
# `VPC`：私有网络
# `DIRECTCONNECT`：专线网关
# `BMVPC`：黑石私有网络
# `VPNGW`：VPNGW类型
# @type InstanceType: String
# @param Description: 备注
# @type Description: String
# @param RouteTableId: 实例关联的路由表ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableId: String
attr_accessor :InstanceId, :InstanceRegion, :InstanceType, :Description, :RouteTableId
def initialize(instanceid=nil, instanceregion=nil, instancetype=nil, description=nil, routetableid=nil)
@InstanceId = instanceid
@InstanceRegion = instanceregion
@InstanceType = instancetype
@Description = description
@RouteTableId = routetableid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceRegion = params['InstanceRegion']
@InstanceType = params['InstanceType']
@Description = params['Description']
@RouteTableId = params['RouteTableId']
end
end
# 云联网（CCN）地域出带宽上限
class CcnRegionBandwidthLimit < TencentCloud::Common::AbstractModel
# @param Region: 地域，例如：ap-guangzhou
# @type Region: String
# @param BandwidthLimit: 出带宽上限，单位：Mbps
# @type BandwidthLimit: Integer
# @param IsBm: 是否黑石地域，默认`false`。
# @type IsBm: Boolean
# @param DstRegion: 目的地域，例如：ap-shanghai
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DstRegion: String
# @param DstIsBm: 目的地域是否为黑石地域，默认`false`。
# @type DstIsBm: Boolean
attr_accessor :Region, :BandwidthLimit, :IsBm, :DstRegion, :DstIsBm
def initialize(region=nil, bandwidthlimit=nil, isbm=nil, dstregion=nil, dstisbm=nil)
@Region = region
@BandwidthLimit = bandwidthlimit
@IsBm = isbm
@DstRegion = dstregion
@DstIsBm = dstisbm
end
def deserialize(params)
@Region = params['Region']
@BandwidthLimit = params['BandwidthLimit']
@IsBm = params['IsBm']
@DstRegion = params['DstRegion']
@DstIsBm = params['DstIsBm']
end
end
# CCN路由策略对象
class CcnRoute < TencentCloud::Common::AbstractModel
# @param RouteId: 路由策略ID
# @type RouteId: String
# @param DestinationCidrBlock: 目的端
# @type DestinationCidrBlock: String
# @param InstanceType: 下一跳类型（关联实例类型），所有类型：VPC、DIRECTCONNECT
# @type InstanceType: String
# @param InstanceId: 下一跳（关联实例）
# @type InstanceId: String
# @param InstanceName: 下一跳名称（关联实例名称）
# @type InstanceName: String
# @param InstanceRegion: 下一跳所属地域（关联实例所属地域）
# @type InstanceRegion: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param Enabled: 路由是否启用
# @type Enabled: Boolean
# @param InstanceUin: 关联实例所属UIN（根账号）
# @type InstanceUin: String
# @param ExtraState: 路由的扩展状态
# @type ExtraState: String
# @param IsBgp: 是否动态路由
# @type IsBgp: Boolean
# @param RoutePriority: 路由优先级
# @type RoutePriority: Integer
# @param InstanceExtraName: 下一跳扩展名称（关联实例的扩展名称）
# @type InstanceExtraName: String
attr_accessor :RouteId, :DestinationCidrBlock, :InstanceType, :InstanceId, :InstanceName, :InstanceRegion, :UpdateTime, :Enabled, :InstanceUin, :ExtraState, :IsBgp, :RoutePriority, :InstanceExtraName
def initialize(routeid=nil, destinationcidrblock=nil, instancetype=nil, instanceid=nil, instancename=nil, instanceregion=nil, updatetime=nil, enabled=nil, instanceuin=nil, extrastate=nil, isbgp=nil, routepriority=nil, instanceextraname=nil)
@RouteId = routeid
@DestinationCidrBlock = destinationcidrblock
@InstanceType = instancetype
@InstanceId = instanceid
@InstanceName = instancename
@InstanceRegion = instanceregion
@UpdateTime = updatetime
@Enabled = enabled
@InstanceUin = instanceuin
@ExtraState = extrastate
@IsBgp = isbgp
@RoutePriority = routepriority
@InstanceExtraName = instanceextraname
end
def deserialize(params)
@RouteId = params['RouteId']
@DestinationCidrBlock = params['DestinationCidrBlock']
@InstanceType = params['InstanceType']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceRegion = params['InstanceRegion']
@UpdateTime = params['UpdateTime']
@Enabled = params['Enabled']
@InstanceUin = params['InstanceUin']
@ExtraState = params['ExtraState']
@IsBgp = params['IsBgp']
@RoutePriority = params['RoutePriority']
@InstanceExtraName = params['InstanceExtraName']
end
end
# CheckAssistantCidr请求参数结构体
class CheckAssistantCidrRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param NewCidrBlocks: 待添加的负载CIDR。CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]。入参NewCidrBlocks和OldCidrBlocks至少需要其一。
# @type NewCidrBlocks: Array
# @param OldCidrBlocks: 待删除的负载CIDR。CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]。入参NewCidrBlocks和OldCidrBlocks至少需要其一。
# @type OldCidrBlocks: Array
attr_accessor :VpcId, :NewCidrBlocks, :OldCidrBlocks
def initialize(vpcid=nil, newcidrblocks=nil, oldcidrblocks=nil)
@VpcId = vpcid
@NewCidrBlocks = newcidrblocks
@OldCidrBlocks = oldcidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
@NewCidrBlocks = params['NewCidrBlocks']
@OldCidrBlocks = params['OldCidrBlocks']
end
end
# CheckAssistantCidr返回参数结构体
class CheckAssistantCidrResponse < TencentCloud::Common::AbstractModel
# @param ConflictSourceSet: 冲突资源信息数组。
# @type ConflictSourceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ConflictSourceSet, :RequestId
def initialize(conflictsourceset=nil, requestid=nil)
@ConflictSourceSet = conflictsourceset
@RequestId = requestid
end
def deserialize(params)
unless params['ConflictSourceSet'].nil?
@ConflictSourceSet = []
params['ConflictSourceSet'].each do |i|
conflictsource_tmp = ConflictSource.new
conflictsource_tmp.deserialize(i)
@ConflictSourceSet << conflictsource_tmp
end
end
@RequestId = params['RequestId']
end
end
# CheckDefaultSubnet请求参数结构体
class CheckDefaultSubnetRequest < TencentCloud::Common::AbstractModel
# @param Zone: 子网所在的可用区ID，不同子网选择不同可用区可以做跨可用区灾备。
# @type Zone: String
attr_accessor :Zone
def initialize(zone=nil)
@Zone = zone
end
def deserialize(params)
@Zone = params['Zone']
end
end
# CheckDefaultSubnet返回参数结构体
class CheckDefaultSubnetResponse < TencentCloud::Common::AbstractModel
# @param Result: 检查结果。true为可以创建默认子网，false为不可以创建默认子网。
# @type Result: Boolean
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Result, :RequestId
def initialize(result=nil, requestid=nil)
@Result = result
@RequestId = requestid
end
def deserialize(params)
@Result = params['Result']
@RequestId = params['RequestId']
end
end
# CheckNetDetectState请求参数结构体
class CheckNetDetectStateRequest < TencentCloud::Common::AbstractModel
# @param DetectDestinationIp: 探测目的IPv4地址数组，最多两个。
# @type DetectDestinationIp: Array
# @param NextHopType: 下一跳类型，目前我们支持的类型有：
# VPN：VPN网关；
# DIRECTCONNECT：专线网关；
# PEERCONNECTION：对等连接；
# NAT：NAT网关；
# NORMAL_CVM：普通云服务器；
# @type NextHopType: String
# @param NextHopDestination: 下一跳目的网关，取值与“下一跳类型”相关：
# 下一跳类型为VPN，取值VPN网关ID，形如：vpngw-12345678；
# 下一跳类型为DIRECTCONNECT，取值专线网关ID，形如：dcg-12345678；
# 下一跳类型为PEERCONNECTION，取值对等连接ID，形如：pcx-12345678；
# 下一跳类型为NAT，取值Nat网关，形如：nat-12345678；
# 下一跳类型为NORMAL_CVM，取值云服务器IPv4地址，形如：10.0.0.12；
# @type NextHopDestination: String
# @param NetDetectId: 网络探测实例ID。形如：netd-12345678。该参数与（VpcId，SubnetId，NetDetectName），至少要有一个。当NetDetectId存在时，使用NetDetectId。
# @type NetDetectId: String
# @param VpcId: `VPC`实例`ID`。形如：`vpc-12345678`。该参数与（SubnetId，NetDetectName）配合使用，与NetDetectId至少要有一个。当NetDetectId存在时，使用NetDetectId。
# @type VpcId: String
# @param SubnetId: 子网实例ID。形如：subnet-12345678。该参数与（VpcId，NetDetectName）配合使用，与NetDetectId至少要有一个。当NetDetectId存在时，使用NetDetectId。
# @type SubnetId: String
# @param NetDetectName: 网络探测名称，最大长度不能超过60个字节。该参数与（VpcId，SubnetId）配合使用，与NetDetectId至少要有一个。当NetDetectId存在时，使用NetDetectId。
# @type NetDetectName: String
attr_accessor :DetectDestinationIp, :NextHopType, :NextHopDestination, :NetDetectId, :VpcId, :SubnetId, :NetDetectName
def initialize(detectdestinationip=nil, nexthoptype=nil, nexthopdestination=nil, netdetectid=nil, vpcid=nil, subnetid=nil, netdetectname=nil)
@DetectDestinationIp = detectdestinationip
@NextHopType = nexthoptype
@NextHopDestination = nexthopdestination
@NetDetectId = netdetectid
@VpcId = vpcid
@SubnetId = subnetid
@NetDetectName = netdetectname
end
def deserialize(params)
@DetectDestinationIp = params['DetectDestinationIp']
@NextHopType = params['NextHopType']
@NextHopDestination = params['NextHopDestination']
@NetDetectId = params['NetDetectId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@NetDetectName = params['NetDetectName']
end
end
# CheckNetDetectState返回参数结构体
class CheckNetDetectStateResponse < TencentCloud::Common::AbstractModel
# @param NetDetectIpStateSet: 网络探测验证结果对象数组。
# @type NetDetectIpStateSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetDetectIpStateSet, :RequestId
def initialize(netdetectipstateset=nil, requestid=nil)
@NetDetectIpStateSet = netdetectipstateset
@RequestId = requestid
end
def deserialize(params)
unless params['NetDetectIpStateSet'].nil?
@NetDetectIpStateSet = []
params['NetDetectIpStateSet'].each do |i|
netdetectipstate_tmp = NetDetectIpState.new
netdetectipstate_tmp.deserialize(i)
@NetDetectIpStateSet << netdetectipstate_tmp
end
end
@RequestId = params['RequestId']
end
end
# 用于发布云联网的cidr信息
class CidrForCcn < TencentCloud::Common::AbstractModel
# @param Cidr: local cidr值。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Cidr: String
# @param PublishedToVbc: 是否发布到了云联网。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublishedToVbc: Boolean
attr_accessor :Cidr, :PublishedToVbc
def initialize(cidr=nil, publishedtovbc=nil)
@Cidr = cidr
@PublishedToVbc = publishedtovbc
end
def deserialize(params)
@Cidr = params['Cidr']
@PublishedToVbc = params['PublishedToVbc']
end
end
# 私有网络和基础网络互通设备
class ClassicLinkInstance < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID
# @type VpcId: String
# @param InstanceId: 云服务器实例唯一ID
# @type InstanceId: String
attr_accessor :VpcId, :InstanceId
def initialize(vpcid=nil, instanceid=nil)
@VpcId = vpcid
@InstanceId = instanceid
end
def deserialize(params)
@VpcId = params['VpcId']
@InstanceId = params['InstanceId']
end
end
# CloneSecurityGroup请求参数结构体
class CloneSecurityGroupRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param GroupName: 安全组名称，可任意命名，但不得超过60个字符。未提供参数时，克隆后的安全组名称和SecurityGroupId对应的安全组名称相同。
# @type GroupName: String
# @param GroupDescription: 安全组备注，最多100个字符。未提供参数时，克隆后的安全组备注和SecurityGroupId对应的安全组备注相同。
# @type GroupDescription: String
# @param ProjectId: 项目ID，默认0。可在qcloud控制台项目管理页面查询到。
# @type ProjectId: String
# @param RemoteRegion: 源Region,跨地域克隆安全组时，需要传入源安全组所属地域信息，例如：克隆广州的安全组到上海，则这里需要传入广州安全的地域信息：ap-guangzhou。
# @type RemoteRegion: String
attr_accessor :SecurityGroupId, :GroupName, :GroupDescription, :ProjectId, :RemoteRegion
def initialize(securitygroupid=nil, groupname=nil, groupdescription=nil, projectid=nil, remoteregion=nil)
@SecurityGroupId = securitygroupid
@GroupName = groupname
@GroupDescription = groupdescription
@ProjectId = projectid
@RemoteRegion = remoteregion
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
@GroupName = params['GroupName']
@GroupDescription = params['GroupDescription']
@ProjectId = params['ProjectId']
@RemoteRegion = params['RemoteRegion']
end
end
# CloneSecurityGroup返回参数结构体
class CloneSecurityGroupResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroup: 安全组对象。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityGroup: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroup, :RequestId
def initialize(securitygroup=nil, requestid=nil)
@SecurityGroup = securitygroup
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroup'].nil?
@SecurityGroup = SecurityGroup.new
@SecurityGroup.deserialize(params['SecurityGroup'])
end
@RequestId = params['RequestId']
end
end
# 冲突资源条目信息。
class ConflictItem < TencentCloud::Common::AbstractModel
# @param ConfilctId: 冲突资源的ID
# @type ConfilctId: String
# @param DestinationItem: 冲突目的资源
# @type DestinationItem: String
attr_accessor :ConfilctId, :DestinationItem
def initialize(confilctid=nil, destinationitem=nil)
@ConfilctId = confilctid
@DestinationItem = destinationitem
end
def deserialize(params)
@ConfilctId = params['ConfilctId']
@DestinationItem = params['DestinationItem']
end
end
# 冲突资源信息。
class ConflictSource < TencentCloud::Common::AbstractModel
# @param ConflictSourceId: 冲突资源ID
# @type ConflictSourceId: String
# @param SourceItem: 冲突资源
# @type SourceItem: String
# @param ConflictItemSet: 冲突资源条目信息
# @type ConflictItemSet: Array
attr_accessor :ConflictSourceId, :SourceItem, :ConflictItemSet
def initialize(conflictsourceid=nil, sourceitem=nil, conflictitemset=nil)
@ConflictSourceId = conflictsourceid
@SourceItem = sourceitem
@ConflictItemSet = conflictitemset
end
def deserialize(params)
@ConflictSourceId = params['ConflictSourceId']
@SourceItem = params['SourceItem']
unless params['ConflictItemSet'].nil?
@ConflictItemSet = []
params['ConflictItemSet'].each do |i|
conflictitem_tmp = ConflictItem.new
conflictitem_tmp.deserialize(i)
@ConflictItemSet << conflictitem_tmp
end
end
end
end
# CreateAddressTemplateGroup请求参数结构体
class CreateAddressTemplateGroupRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateGroupName: IP地址模板集合名称。
# @type AddressTemplateGroupName: String
# @param AddressTemplateIds: IP地址模板实例ID，例如：ipm-mdunqeb6。
# @type AddressTemplateIds: Array
attr_accessor :AddressTemplateGroupName, :AddressTemplateIds
def initialize(addresstemplategroupname=nil, addresstemplateids=nil)
@AddressTemplateGroupName = addresstemplategroupname
@AddressTemplateIds = addresstemplateids
end
def deserialize(params)
@AddressTemplateGroupName = params['AddressTemplateGroupName']
@AddressTemplateIds = params['AddressTemplateIds']
end
end
# CreateAddressTemplateGroup返回参数结构体
class CreateAddressTemplateGroupResponse < TencentCloud::Common::AbstractModel
# @param AddressTemplateGroup: IP地址模板集合对象。
# @type AddressTemplateGroup: :class:`Tencentcloud::Vpc.v20170312.models.AddressTemplateGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AddressTemplateGroup, :RequestId
def initialize(addresstemplategroup=nil, requestid=nil)
@AddressTemplateGroup = addresstemplategroup
@RequestId = requestid
end
def deserialize(params)
unless params['AddressTemplateGroup'].nil?
@AddressTemplateGroup = AddressTemplateGroup.new
@AddressTemplateGroup.deserialize(params['AddressTemplateGroup'])
end
@RequestId = params['RequestId']
end
end
# CreateAddressTemplate请求参数结构体
class CreateAddressTemplateRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateName: IP地址模板名称。
# @type AddressTemplateName: String
# @param Addresses: 地址信息，支持 IP、CIDR、IP 范围。Addresses与AddressesExtra必填其一。
# @type Addresses: Array
# @param AddressesExtra: 地址信息，支持携带备注，支持 IP、CIDR、IP 范围。Addresses与AddressesExtra必填其一。
# @type AddressesExtra: Array
attr_accessor :AddressTemplateName, :Addresses, :AddressesExtra
def initialize(addresstemplatename=nil, addresses=nil, addressesextra=nil)
@AddressTemplateName = addresstemplatename
@Addresses = addresses
@AddressesExtra = addressesextra
end
def deserialize(params)
@AddressTemplateName = params['AddressTemplateName']
@Addresses = params['Addresses']
unless params['AddressesExtra'].nil?
@AddressesExtra = []
params['AddressesExtra'].each do |i|
addressinfo_tmp = AddressInfo.new
addressinfo_tmp.deserialize(i)
@AddressesExtra << addressinfo_tmp
end
end
end
end
# CreateAddressTemplate返回参数结构体
class CreateAddressTemplateResponse < TencentCloud::Common::AbstractModel
# @param AddressTemplate: IP地址模板对象。
# @type AddressTemplate: :class:`Tencentcloud::Vpc.v20170312.models.AddressTemplate`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AddressTemplate, :RequestId
def initialize(addresstemplate=nil, requestid=nil)
@AddressTemplate = addresstemplate
@RequestId = requestid
end
def deserialize(params)
unless params['AddressTemplate'].nil?
@AddressTemplate = AddressTemplate.new
@AddressTemplate.deserialize(params['AddressTemplate'])
end
@RequestId = params['RequestId']
end
end
# CreateAndAttachNetworkInterface请求参数结构体
class CreateAndAttachNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param NetworkInterfaceName: 弹性网卡名称，最大长度不能超过60个字节。
# @type NetworkInterfaceName: String
# @param SubnetId: 弹性网卡所在的子网实例ID，例如：subnet-0ap8nwca。
# @type SubnetId: String
# @param InstanceId: 云服务器实例ID。
# @type InstanceId: String
# @param PrivateIpAddresses: 指定的内网IP信息，单次最多指定10个。
# @type PrivateIpAddresses: Array
# @param SecondaryPrivateIpAddressCount: 新申请的内网IP地址个数，内网IP地址个数总和不能超过配数。
# @type SecondaryPrivateIpAddressCount: Integer
# @param SecurityGroupIds: 指定绑定的安全组，例如：['sg-1dd51d']。
# @type SecurityGroupIds: Array
# @param NetworkInterfaceDescription: 弹性网卡描述，可任意命名，但不得超过60个字符。
# @type NetworkInterfaceDescription: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param AttachType: 绑定类型：0 标准型 1 扩展型。
# @type AttachType: Integer
attr_accessor :VpcId, :NetworkInterfaceName, :SubnetId, :InstanceId, :PrivateIpAddresses, :SecondaryPrivateIpAddressCount, :SecurityGroupIds, :NetworkInterfaceDescription, :Tags, :AttachType
def initialize(vpcid=nil, networkinterfacename=nil, subnetid=nil, instanceid=nil, privateipaddresses=nil, secondaryprivateipaddresscount=nil, securitygroupids=nil, networkinterfacedescription=nil, tags=nil, attachtype=nil)
@VpcId = vpcid
@NetworkInterfaceName = networkinterfacename
@SubnetId = subnetid
@InstanceId = instanceid
@PrivateIpAddresses = privateipaddresses
@SecondaryPrivateIpAddressCount = secondaryprivateipaddresscount
@SecurityGroupIds = securitygroupids
@NetworkInterfaceDescription = networkinterfacedescription
@Tags = tags
@AttachType = attachtype
end
def deserialize(params)
@VpcId = params['VpcId']
@NetworkInterfaceName = params['NetworkInterfaceName']
@SubnetId = params['SubnetId']
@InstanceId = params['InstanceId']
unless params['PrivateIpAddresses'].nil?
@PrivateIpAddresses = []
params['PrivateIpAddresses'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddresses << privateipaddressspecification_tmp
end
end
@SecondaryPrivateIpAddressCount = params['SecondaryPrivateIpAddressCount']
@SecurityGroupIds = params['SecurityGroupIds']
@NetworkInterfaceDescription = params['NetworkInterfaceDescription']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@AttachType = params['AttachType']
end
end
# CreateAndAttachNetworkInterface返回参数结构体
class CreateAndAttachNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param NetworkInterface: 弹性网卡实例。
# @type NetworkInterface: :class:`Tencentcloud::Vpc.v20170312.models.NetworkInterface`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetworkInterface, :RequestId
def initialize(networkinterface=nil, requestid=nil)
@NetworkInterface = networkinterface
@RequestId = requestid
end
def deserialize(params)
unless params['NetworkInterface'].nil?
@NetworkInterface = NetworkInterface.new
@NetworkInterface.deserialize(params['NetworkInterface'])
end
@RequestId = params['RequestId']
end
end
# CreateAssistantCidr请求参数结构体
class CreateAssistantCidrRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param CidrBlocks: CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]
# @type CidrBlocks: Array
attr_accessor :VpcId, :CidrBlocks
def initialize(vpcid=nil, cidrblocks=nil)
@VpcId = vpcid
@CidrBlocks = cidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
@CidrBlocks = params['CidrBlocks']
end
end
# CreateAssistantCidr返回参数结构体
class CreateAssistantCidrResponse < TencentCloud::Common::AbstractModel
# @param AssistantCidrSet: 辅助CIDR数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssistantCidrSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AssistantCidrSet, :RequestId
def initialize(assistantcidrset=nil, requestid=nil)
@AssistantCidrSet = assistantcidrset
@RequestId = requestid
end
def deserialize(params)
unless params['AssistantCidrSet'].nil?
@AssistantCidrSet = []
params['AssistantCidrSet'].each do |i|
assistantcidr_tmp = AssistantCidr.new
assistantcidr_tmp.deserialize(i)
@AssistantCidrSet << assistantcidr_tmp
end
end
@RequestId = params['RequestId']
end
end
# CreateBandwidthPackage请求参数结构体
class CreateBandwidthPackageRequest < TencentCloud::Common::AbstractModel
# @param NetworkType: 带宽包类型, 默认值: BGP, 可选值:
# BGP: 普通BGP共享带宽包
# HIGH_QUALITY_BGP: 精品BGP共享带宽包
# @type NetworkType: String
# @param ChargeType: 带宽包计费类型, 默认为: TOP5_POSTPAID_BY_MONTH, 可选值:
# TOP5_POSTPAID_BY_MONTH: 按月后付费TOP5计费
# PERCENT95_POSTPAID_BY_MONTH: 按月后付费月95计费
# FIXED_PREPAID_BY_MONTH: 包月预付费计费
# @type ChargeType: String
# @param BandwidthPackageName: 带宽包名称。
# @type BandwidthPackageName: String
# @param BandwidthPackageCount: 带宽包数量(传统账户类型只能填1), 标准账户类型取值范围为1~20。
# @type BandwidthPackageCount: Integer
# @param InternetMaxBandwidth: 带宽包限速大小。单位：Mbps，-1表示不限速。该功能当前内测中，暂不对外开放。
# @type InternetMaxBandwidth: Integer
# @param Tags: 需要关联的标签列表。
# @type Tags: Array
# @param Protocol: 带宽包协议类型。当前支持'ipv4'和'ipv6'协议带宽包，默认值是'ipv4'。
# @type Protocol: String
attr_accessor :NetworkType, :ChargeType, :BandwidthPackageName, :BandwidthPackageCount, :InternetMaxBandwidth, :Tags, :Protocol
def initialize(networktype=nil, chargetype=nil, bandwidthpackagename=nil, bandwidthpackagecount=nil, internetmaxbandwidth=nil, tags=nil, protocol=nil)
@NetworkType = networktype
@ChargeType = chargetype
@BandwidthPackageName = bandwidthpackagename
@BandwidthPackageCount = bandwidthpackagecount
@InternetMaxBandwidth = internetmaxbandwidth
@Tags = tags
@Protocol = protocol
end
def deserialize(params)
@NetworkType = params['NetworkType']
@ChargeType = params['ChargeType']
@BandwidthPackageName = params['BandwidthPackageName']
@BandwidthPackageCount = params['BandwidthPackageCount']
@InternetMaxBandwidth = params['InternetMaxBandwidth']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@Protocol = params['Protocol']
end
end
# CreateBandwidthPackage返回参数结构体
class CreateBandwidthPackageResponse < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 带宽包唯一ID。
# @type BandwidthPackageId: String
# @param BandwidthPackageIds: 带宽包唯一ID列表(申请数量大于1时有效)。
# @type BandwidthPackageIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BandwidthPackageId, :BandwidthPackageIds, :RequestId
def initialize(bandwidthpackageid=nil, bandwidthpackageids=nil, requestid=nil)
@BandwidthPackageId = bandwidthpackageid
@BandwidthPackageIds = bandwidthpackageids
@RequestId = requestid
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
@BandwidthPackageIds = params['BandwidthPackageIds']
@RequestId = params['RequestId']
end
end
# CreateCcn请求参数结构体
class CreateCcnRequest < TencentCloud::Common::AbstractModel
# @param CcnName: CCN名称，最大长度不能超过60个字节。
# @type CcnName: String
# @param CcnDescription: CCN描述信息，最大长度不能超过100个字节。
# @type CcnDescription: String
# @param QosLevel: CCN服务质量，'PT'：白金，'AU'：金，'AG'：银，默认为‘AU’。
# @type QosLevel: String
# @param InstanceChargeType: 计费模式，PREPAID：表示预付费，即包年包月，POSTPAID：表示后付费，即按量计费。默认：POSTPAID。
# @type InstanceChargeType: String
# @param BandwidthLimitType: 限速类型，OUTER_REGION_LIMIT表示地域出口限速，INTER_REGION_LIMIT为地域间限速，默认为OUTER_REGION_LIMIT。预付费模式仅支持地域间限速，后付费模式支持地域间限速和地域出口限速。
# @type BandwidthLimitType: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
attr_accessor :CcnName, :CcnDescription, :QosLevel, :InstanceChargeType, :BandwidthLimitType, :Tags
def initialize(ccnname=nil, ccndescription=nil, qoslevel=nil, instancechargetype=nil, bandwidthlimittype=nil, tags=nil)
@CcnName = ccnname
@CcnDescription = ccndescription
@QosLevel = qoslevel
@InstanceChargeType = instancechargetype
@BandwidthLimitType = bandwidthlimittype
@Tags = tags
end
def deserialize(params)
@CcnName = params['CcnName']
@CcnDescription = params['CcnDescription']
@QosLevel = params['QosLevel']
@InstanceChargeType = params['InstanceChargeType']
@BandwidthLimitType = params['BandwidthLimitType']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateCcn返回参数结构体
class CreateCcnResponse < TencentCloud::Common::AbstractModel
# @param Ccn: 云联网（CCN）对象。
# @type Ccn: :class:`Tencentcloud::Vpc.v20170312.models.CCN`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ccn, :RequestId
def initialize(ccn=nil, requestid=nil)
@Ccn = ccn
@RequestId = requestid
end
def deserialize(params)
unless params['Ccn'].nil?
@Ccn = CCN.new
@Ccn.deserialize(params['Ccn'])
end
@RequestId = params['RequestId']
end
end
# CreateCustomerGateway请求参数结构体
class CreateCustomerGatewayRequest < TencentCloud::Common::AbstractModel
# @param CustomerGatewayName: 对端网关名称，可任意命名，但不得超过60个字符。
# @type CustomerGatewayName: String
# @param IpAddress: 对端网关公网IP。
# @type IpAddress: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
attr_accessor :CustomerGatewayName, :IpAddress, :Tags
def initialize(customergatewayname=nil, ipaddress=nil, tags=nil)
@CustomerGatewayName = customergatewayname
@IpAddress = ipaddress
@Tags = tags
end
def deserialize(params)
@CustomerGatewayName = params['CustomerGatewayName']
@IpAddress = params['IpAddress']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateCustomerGateway返回参数结构体
class CreateCustomerGatewayResponse < TencentCloud::Common::AbstractModel
# @param CustomerGateway: 对端网关对象
# @type CustomerGateway: :class:`Tencentcloud::Vpc.v20170312.models.CustomerGateway`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CustomerGateway, :RequestId
def initialize(customergateway=nil, requestid=nil)
@CustomerGateway = customergateway
@RequestId = requestid
end
def deserialize(params)
unless params['CustomerGateway'].nil?
@CustomerGateway = CustomerGateway.new
@CustomerGateway.deserialize(params['CustomerGateway'])
end
@RequestId = params['RequestId']
end
end
# CreateDefaultSecurityGroup请求参数结构体
class CreateDefaultSecurityGroupRequest < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID，默认0。可在qcloud控制台项目管理页面查询到。
# @type ProjectId: String
attr_accessor :ProjectId
def initialize(projectid=nil)
@ProjectId = projectid
end
def deserialize(params)
@ProjectId = params['ProjectId']
end
end
# CreateDefaultSecurityGroup返回参数结构体
class CreateDefaultSecurityGroupResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroup: 安全组对象。
# @type SecurityGroup: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroup, :RequestId
def initialize(securitygroup=nil, requestid=nil)
@SecurityGroup = securitygroup
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroup'].nil?
@SecurityGroup = SecurityGroup.new
@SecurityGroup.deserialize(params['SecurityGroup'])
end
@RequestId = params['RequestId']
end
end
# CreateDefaultVpc请求参数结构体
class CreateDefaultVpcRequest < TencentCloud::Common::AbstractModel
# @param Zone: 子网所在的可用区，该参数可通过[DescribeZones](https://cloud.tencent.com/document/product/213/15707)接口获取，例如ap-guangzhou-1，不指定时将随机选择可用区。
# @type Zone: String
# @param Force: 是否强制返回默认VPC。
# @type Force: Boolean
attr_accessor :Zone, :Force
def initialize(zone=nil, force=nil)
@Zone = zone
@Force = force
end
def deserialize(params)
@Zone = params['Zone']
@Force = params['Force']
end
end
# CreateDefaultVpc返回参数结构体
class CreateDefaultVpcResponse < TencentCloud::Common::AbstractModel
# @param Vpc: 默认VPC和子网ID
# @type Vpc: :class:`Tencentcloud::Vpc.v20170312.models.DefaultVpcSubnet`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Vpc, :RequestId
def initialize(vpc=nil, requestid=nil)
@Vpc = vpc
@RequestId = requestid
end
def deserialize(params)
unless params['Vpc'].nil?
@Vpc = DefaultVpcSubnet.new
@Vpc.deserialize(params['Vpc'])
end
@RequestId = params['RequestId']
end
end
# CreateDhcpIp请求参数结构体
class CreateDhcpIpRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 私有网络`ID`。
# @type VpcId: String
# @param SubnetId: 子网`ID`。
# @type SubnetId: String
# @param DhcpIpName: `DhcpIp`名称。
# @type DhcpIpName: String
# @param SecondaryPrivateIpAddressCount: 新申请的内网IP地址个数。总数不能超过64个。
# @type SecondaryPrivateIpAddressCount: Integer
attr_accessor :VpcId, :SubnetId, :DhcpIpName, :SecondaryPrivateIpAddressCount
def initialize(vpcid=nil, subnetid=nil, dhcpipname=nil, secondaryprivateipaddresscount=nil)
@VpcId = vpcid
@SubnetId = subnetid
@DhcpIpName = dhcpipname
@SecondaryPrivateIpAddressCount = secondaryprivateipaddresscount
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@DhcpIpName = params['DhcpIpName']
@SecondaryPrivateIpAddressCount = params['SecondaryPrivateIpAddressCount']
end
end
# CreateDhcpIp返回参数结构体
class CreateDhcpIpResponse < TencentCloud::Common::AbstractModel
# @param DhcpIpSet: 新创建的`DhcpIp`信息
# @type DhcpIpSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DhcpIpSet, :RequestId
def initialize(dhcpipset=nil, requestid=nil)
@DhcpIpSet = dhcpipset
@RequestId = requestid
end
def deserialize(params)
unless params['DhcpIpSet'].nil?
@DhcpIpSet = []
params['DhcpIpSet'].each do |i|
dhcpip_tmp = DhcpIp.new
dhcpip_tmp.deserialize(i)
@DhcpIpSet << dhcpip_tmp
end
end
@RequestId = params['RequestId']
end
end
# CreateDirectConnectGatewayCcnRoutes请求参数结构体
class CreateDirectConnectGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关ID，形如：dcg-prpqlmg1
# @type DirectConnectGatewayId: String
# @param Routes: 需要连通的IDC网段列表
# @type Routes: Array
attr_accessor :DirectConnectGatewayId, :Routes
def initialize(directconnectgatewayid=nil, routes=nil)
@DirectConnectGatewayId = directconnectgatewayid
@Routes = routes
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
directconnectgatewayccnroute_tmp = DirectConnectGatewayCcnRoute.new
directconnectgatewayccnroute_tmp.deserialize(i)
@Routes << directconnectgatewayccnroute_tmp
end
end
end
end
# CreateDirectConnectGatewayCcnRoutes返回参数结构体
class CreateDirectConnectGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateDirectConnectGateway请求参数结构体
class CreateDirectConnectGatewayRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayName: 专线网关名称
# @type DirectConnectGatewayName: String
# @param NetworkType: 关联网络类型，可选值：
# VPC - 私有网络
# CCN - 云联网
# @type NetworkType: String
# @param NetworkInstanceId: NetworkType 为 VPC 时，这里传值为私有网络实例ID
# NetworkType 为 CCN 时，这里传值为云联网实例ID
# @type NetworkInstanceId: String
# @param GatewayType: 网关类型，可选值：
# NORMAL - （默认）标准型，注：云联网只支持标准型
# NAT - NAT型NAT类型支持网络地址转换配置，类型确定后不能修改；一个私有网络可以创建一个NAT类型的专线网关和一个非NAT类型的专线网关
# @type GatewayType: String
# @param ModeType: 云联网路由发布模式，可选值：`standard`（标准模式）、`exquisite`（精细模式）。只有云联网类型专线网关才支持`ModeType`。
# @type ModeType: String
# @param Zone: 专线网关可用区
# @type Zone: String
# @param HaZoneGroupId: 专线网关高可用区容灾组ID
# @type HaZoneGroupId: String
attr_accessor :DirectConnectGatewayName, :NetworkType, :NetworkInstanceId, :GatewayType, :ModeType, :Zone, :HaZoneGroupId
def initialize(directconnectgatewayname=nil, networktype=nil, networkinstanceid=nil, gatewaytype=nil, modetype=nil, zone=nil, hazonegroupid=nil)
@DirectConnectGatewayName = directconnectgatewayname
@NetworkType = networktype
@NetworkInstanceId = networkinstanceid
@GatewayType = gatewaytype
@ModeType = modetype
@Zone = zone
@HaZoneGroupId = hazonegroupid
end
def deserialize(params)
@DirectConnectGatewayName = params['DirectConnectGatewayName']
@NetworkType = params['NetworkType']
@NetworkInstanceId = params['NetworkInstanceId']
@GatewayType = params['GatewayType']
@ModeType = params['ModeType']
@Zone = params['Zone']
@HaZoneGroupId = params['HaZoneGroupId']
end
end
# CreateDirectConnectGateway返回参数结构体
class CreateDirectConnectGatewayResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectGateway: 专线网关对象。
# @type DirectConnectGateway: :class:`Tencentcloud::Vpc.v20170312.models.DirectConnectGateway`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectGateway, :RequestId
def initialize(directconnectgateway=nil, requestid=nil)
@DirectConnectGateway = directconnectgateway
@RequestId = requestid
end
def deserialize(params)
unless params['DirectConnectGateway'].nil?
@DirectConnectGateway = DirectConnectGateway.new
@DirectConnectGateway.deserialize(params['DirectConnectGateway'])
end
@RequestId = params['RequestId']
end
end
# CreateFlowLog请求参数结构体
class CreateFlowLogRequest < TencentCloud::Common::AbstractModel
# @param FlowLogName: 流日志实例名字
# @type FlowLogName: String
# @param ResourceType: 流日志所属资源类型，VPC|SUBNET|NETWORKINTERFACE|CCN
# @type ResourceType: String
# @param ResourceId: 资源唯一ID
# @type ResourceId: String
# @param TrafficType: 流日志采集类型，ACCEPT|REJECT|ALL
# @type TrafficType: String
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID，当ResourceType为CCN时不填，其他类型必填。
# @type VpcId: String
# @param FlowLogDescription: 流日志实例描述
# @type FlowLogDescription: String
# @param CloudLogId: 流日志存储ID
# @type CloudLogId: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param StorageType: 消费端类型：cls、ckafka
# @type StorageType: String
# @param FlowLogStorage: 流日志消费端信息，当消费端类型为ckafka时，必填。
# @type FlowLogStorage: :class:`Tencentcloud::Vpc.v20170312.models.FlowLogStorage`
attr_accessor :FlowLogName, :ResourceType, :ResourceId, :TrafficType, :VpcId, :FlowLogDescription, :CloudLogId, :Tags, :StorageType, :FlowLogStorage
def initialize(flowlogname=nil, resourcetype=nil, resourceid=nil, traffictype=nil, vpcid=nil, flowlogdescription=nil, cloudlogid=nil, tags=nil, storagetype=nil, flowlogstorage=nil)
@FlowLogName = flowlogname
@ResourceType = resourcetype
@ResourceId = resourceid
@TrafficType = traffictype
@VpcId = vpcid
@FlowLogDescription = flowlogdescription
@CloudLogId = cloudlogid
@Tags = tags
@StorageType = storagetype
@FlowLogStorage = flowlogstorage
end
def deserialize(params)
@FlowLogName = params['FlowLogName']
@ResourceType = params['ResourceType']
@ResourceId = params['ResourceId']
@TrafficType = params['TrafficType']
@VpcId = params['VpcId']
@FlowLogDescription = params['FlowLogDescription']
@CloudLogId = params['CloudLogId']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@StorageType = params['StorageType']
unless params['FlowLogStorage'].nil?
@FlowLogStorage = FlowLogStorage.new
@FlowLogStorage.deserialize(params['FlowLogStorage'])
end
end
end
# CreateFlowLog返回参数结构体
class CreateFlowLogResponse < TencentCloud::Common::AbstractModel
# @param FlowLog: 创建的流日志信息
# @type FlowLog: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowLog, :RequestId
def initialize(flowlog=nil, requestid=nil)
@FlowLog = flowlog
@RequestId = requestid
end
def deserialize(params)
unless params['FlowLog'].nil?
@FlowLog = []
params['FlowLog'].each do |i|
flowlog_tmp = FlowLog.new
flowlog_tmp.deserialize(i)
@FlowLog << flowlog_tmp
end
end
@RequestId = params['RequestId']
end
end
# CreateHaVip请求参数结构体
class CreateHaVipRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `HAVIP`所在私有网络`ID`。
# @type VpcId: String
# @param SubnetId: `HAVIP`所在子网`ID`。
# @type SubnetId: String
# @param HaVipName: `HAVIP`名称。
# @type HaVipName: String
# @param Vip: 指定虚拟IP地址，必须在`VPC`网段内且未被占用。不指定则自动分配。
# @type Vip: String
attr_accessor :VpcId, :SubnetId, :HaVipName, :Vip
def initialize(vpcid=nil, subnetid=nil, havipname=nil, vip=nil)
@VpcId = vpcid
@SubnetId = subnetid
@HaVipName = havipname
@Vip = vip
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@HaVipName = params['HaVipName']
@Vip = params['Vip']
end
end
# CreateHaVip返回参数结构体
class CreateHaVipResponse < TencentCloud::Common::AbstractModel
# @param HaVip: `HAVIP`对象。
# @type HaVip: :class:`Tencentcloud::Vpc.v20170312.models.HaVip`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HaVip, :RequestId
def initialize(havip=nil, requestid=nil)
@HaVip = havip
@RequestId = requestid
end
def deserialize(params)
unless params['HaVip'].nil?
@HaVip = HaVip.new
@HaVip.deserialize(params['HaVip'])
end
@RequestId = params['RequestId']
end
end
# CreateIp6Translators请求参数结构体
class CreateIp6TranslatorsRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorName: 转换实例名称
# @type Ip6TranslatorName: String
# @param Ip6TranslatorCount: 创建转换实例数量，默认是1个
# @type Ip6TranslatorCount: Integer
# @param Ip6InternetServiceProvider: 转换实例运营商属性，可取"CMCC","CTCC","CUCC","BGP"
# @type Ip6InternetServiceProvider: String
attr_accessor :Ip6TranslatorName, :Ip6TranslatorCount, :Ip6InternetServiceProvider
def initialize(ip6translatorname=nil, ip6translatorcount=nil, ip6internetserviceprovider=nil)
@Ip6TranslatorName = ip6translatorname
@Ip6TranslatorCount = ip6translatorcount
@Ip6InternetServiceProvider = ip6internetserviceprovider
end
def deserialize(params)
@Ip6TranslatorName = params['Ip6TranslatorName']
@Ip6TranslatorCount = params['Ip6TranslatorCount']
@Ip6InternetServiceProvider = params['Ip6InternetServiceProvider']
end
end
# CreateIp6Translators返回参数结构体
class CreateIp6TranslatorsResponse < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorSet: 转换实例的唯一ID数组，形如"ip6-xxxxxxxx"
# @type Ip6TranslatorSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ip6TranslatorSet, :RequestId
def initialize(ip6translatorset=nil, requestid=nil)
@Ip6TranslatorSet = ip6translatorset
@RequestId = requestid
end
def deserialize(params)
@Ip6TranslatorSet = params['Ip6TranslatorSet']
@RequestId = params['RequestId']
end
end
# CreateLocalGateway请求参数结构体
class CreateLocalGatewayRequest < TencentCloud::Common::AbstractModel
# @param LocalGatewayName: 本地网关名称
# @type LocalGatewayName: String
# @param VpcId: VPC实例ID
# @type VpcId: String
# @param CdcId: CDC实例ID
# @type CdcId: String
attr_accessor :LocalGatewayName, :VpcId, :CdcId
def initialize(localgatewayname=nil, vpcid=nil, cdcid=nil)
@LocalGatewayName = localgatewayname
@VpcId = vpcid
@CdcId = cdcid
end
def deserialize(params)
@LocalGatewayName = params['LocalGatewayName']
@VpcId = params['VpcId']
@CdcId = params['CdcId']
end
end
# CreateLocalGateway返回参数结构体
class CreateLocalGatewayResponse < TencentCloud::Common::AbstractModel
# @param LocalGateway: 本地网关信息
# @type LocalGateway: :class:`Tencentcloud::Vpc.v20170312.models.LocalGateway`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :LocalGateway, :RequestId
def initialize(localgateway=nil, requestid=nil)
@LocalGateway = localgateway
@RequestId = requestid
end
def deserialize(params)
unless params['LocalGateway'].nil?
@LocalGateway = LocalGateway.new
@LocalGateway.deserialize(params['LocalGateway'])
end
@RequestId = params['RequestId']
end
end
# CreateNatGatewayDestinationIpPortTranslationNatRule请求参数结构体
class CreateNatGatewayDestinationIpPortTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param DestinationIpPortTranslationNatRules: NAT网关的端口转换规则。
# @type DestinationIpPortTranslationNatRules: Array
attr_accessor :NatGatewayId, :DestinationIpPortTranslationNatRules
def initialize(natgatewayid=nil, destinationipporttranslationnatrules=nil)
@NatGatewayId = natgatewayid
@DestinationIpPortTranslationNatRules = destinationipporttranslationnatrules
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['DestinationIpPortTranslationNatRules'].nil?
@DestinationIpPortTranslationNatRules = []
params['DestinationIpPortTranslationNatRules'].each do |i|
destinationipporttranslationnatrule_tmp = DestinationIpPortTranslationNatRule.new
destinationipporttranslationnatrule_tmp.deserialize(i)
@DestinationIpPortTranslationNatRules << destinationipporttranslationnatrule_tmp
end
end
end
end
# CreateNatGatewayDestinationIpPortTranslationNatRule返回参数结构体
class CreateNatGatewayDestinationIpPortTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateNatGateway请求参数结构体
class CreateNatGatewayRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayName: NAT网关名称
# @type NatGatewayName: String
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param InternetMaxBandwidthOut: NAT网关最大外网出带宽(单位:Mbps)，支持的参数值：`20, 50, 100, 200, 500, 1000, 2000, 5000`，默认: `100Mbps`。
# @type InternetMaxBandwidthOut: Integer
# @param MaxConcurrentConnection: NAT网关并发连接上限，支持参数值：`1000000、3000000、10000000`，默认值为`100000`。
# @type MaxConcurrentConnection: Integer
# @param AddressCount: 需要申请的弹性IP个数，系统会按您的要求生产N个弹性IP，其中AddressCount和PublicAddresses至少传递一个。
# @type AddressCount: Integer
# @param PublicIpAddresses: 绑定NAT网关的弹性IP数组，其中AddressCount和PublicAddresses至少传递一个。
# @type PublicIpAddresses: Array
# @param Zone: 可用区，形如：`ap-guangzhou-1`。
# @type Zone: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param SubnetId: NAT网关所属子网
# @type SubnetId: String
attr_accessor :NatGatewayName, :VpcId, :InternetMaxBandwidthOut, :MaxConcurrentConnection, :AddressCount, :PublicIpAddresses, :Zone, :Tags, :SubnetId
def initialize(natgatewayname=nil, vpcid=nil, internetmaxbandwidthout=nil, maxconcurrentconnection=nil, addresscount=nil, publicipaddresses=nil, zone=nil, tags=nil, subnetid=nil)
@NatGatewayName = natgatewayname
@VpcId = vpcid
@InternetMaxBandwidthOut = internetmaxbandwidthout
@MaxConcurrentConnection = maxconcurrentconnection
@AddressCount = addresscount
@PublicIpAddresses = publicipaddresses
@Zone = zone
@Tags = tags
@SubnetId = subnetid
end
def deserialize(params)
@NatGatewayName = params['NatGatewayName']
@VpcId = params['VpcId']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@MaxConcurrentConnection = params['MaxConcurrentConnection']
@AddressCount = params['AddressCount']
@PublicIpAddresses = params['PublicIpAddresses']
@Zone = params['Zone']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@SubnetId = params['SubnetId']
end
end
# CreateNatGateway返回参数结构体
class CreateNatGatewayResponse < TencentCloud::Common::AbstractModel
# @param NatGatewaySet: NAT网关对象数组。
# @type NatGatewaySet: Array
# @param TotalCount: 符合条件的 NAT网关对象数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NatGatewaySet, :TotalCount, :RequestId
def initialize(natgatewayset=nil, totalcount=nil, requestid=nil)
@NatGatewaySet = natgatewayset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NatGatewaySet'].nil?
@NatGatewaySet = []
params['NatGatewaySet'].each do |i|
natgateway_tmp = NatGateway.new
natgateway_tmp.deserialize(i)
@NatGatewaySet << natgateway_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# CreateNatGatewaySourceIpTranslationNatRule请求参数结构体
class CreateNatGatewaySourceIpTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如："nat-df45454"
# @type NatGatewayId: String
# @param SourceIpTranslationNatRules: NAT网关的SNAT转换规则
# @type SourceIpTranslationNatRules: Array
attr_accessor :NatGatewayId, :SourceIpTranslationNatRules
def initialize(natgatewayid=nil, sourceiptranslationnatrules=nil)
@NatGatewayId = natgatewayid
@SourceIpTranslationNatRules = sourceiptranslationnatrules
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['SourceIpTranslationNatRules'].nil?
@SourceIpTranslationNatRules = []
params['SourceIpTranslationNatRules'].each do |i|
sourceiptranslationnatrule_tmp = SourceIpTranslationNatRule.new
sourceiptranslationnatrule_tmp.deserialize(i)
@SourceIpTranslationNatRules << sourceiptranslationnatrule_tmp
end
end
end
end
# CreateNatGatewaySourceIpTranslationNatRule返回参数结构体
class CreateNatGatewaySourceIpTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateNetDetect请求参数结构体
class CreateNetDetectRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-12345678`
# @type VpcId: String
# @param SubnetId: 子网实例ID。形如：subnet-12345678。
# @type SubnetId: String
# @param NetDetectName: 网络探测名称，最大长度不能超过60个字节。
# @type NetDetectName: String
# @param DetectDestinationIp: 探测目的IPv4地址数组。最多两个。
# @type DetectDestinationIp: Array
# @param NextHopType: 下一跳类型，目前我们支持的类型有：
# VPN：VPN网关；
# DIRECTCONNECT：专线网关；
# PEERCONNECTION：对等连接；
# NAT：NAT网关；
# NORMAL_CVM：普通云服务器；
# CCN：云联网网关；
# @type NextHopType: String
# @param NextHopDestination: 下一跳目的网关，取值与“下一跳类型”相关：
# 下一跳类型为VPN，取值VPN网关ID，形如：vpngw-12345678；
# 下一跳类型为DIRECTCONNECT，取值专线网关ID，形如：dcg-12345678；
# 下一跳类型为PEERCONNECTION，取值对等连接ID，形如：pcx-12345678；
# 下一跳类型为NAT，取值Nat网关，形如：nat-12345678；
# 下一跳类型为NORMAL_CVM，取值云服务器IPv4地址，形如：10.0.0.12；
# 下一跳类型为CCN，取值云联网ID，形如：ccn-12345678；
# @type NextHopDestination: String
# @param NetDetectDescription: 网络探测描述。
# @type NetDetectDescription: String
attr_accessor :VpcId, :SubnetId, :NetDetectName, :DetectDestinationIp, :NextHopType, :NextHopDestination, :NetDetectDescription
def initialize(vpcid=nil, subnetid=nil, netdetectname=nil, detectdestinationip=nil, nexthoptype=nil, nexthopdestination=nil, netdetectdescription=nil)
@VpcId = vpcid
@SubnetId = subnetid
@NetDetectName = netdetectname
@DetectDestinationIp = detectdestinationip
@NextHopType = nexthoptype
@NextHopDestination = nexthopdestination
@NetDetectDescription = netdetectdescription
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@NetDetectName = params['NetDetectName']
@DetectDestinationIp = params['DetectDestinationIp']
@NextHopType = params['NextHopType']
@NextHopDestination = params['NextHopDestination']
@NetDetectDescription = params['NetDetectDescription']
end
end
# CreateNetDetect返回参数结构体
class CreateNetDetectResponse < TencentCloud::Common::AbstractModel
# @param NetDetect: 网络探测（NetDetect）对象。
# @type NetDetect: :class:`Tencentcloud::Vpc.v20170312.models.NetDetect`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetDetect, :RequestId
def initialize(netdetect=nil, requestid=nil)
@NetDetect = netdetect
@RequestId = requestid
end
def deserialize(params)
unless params['NetDetect'].nil?
@NetDetect = NetDetect.new
@NetDetect.deserialize(params['NetDetect'])
end
@RequestId = params['RequestId']
end
end
# CreateNetworkAcl请求参数结构体
class CreateNetworkAclRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param NetworkAclName: 网络ACL名称，最大长度不能超过60个字节。
# @type NetworkAclName: String
attr_accessor :VpcId, :NetworkAclName
def initialize(vpcid=nil, networkaclname=nil)
@VpcId = vpcid
@NetworkAclName = networkaclname
end
def deserialize(params)
@VpcId = params['VpcId']
@NetworkAclName = params['NetworkAclName']
end
end
# CreateNetworkAcl返回参数结构体
class CreateNetworkAclResponse < TencentCloud::Common::AbstractModel
# @param NetworkAcl: 网络ACL实例。
# @type NetworkAcl: :class:`Tencentcloud::Vpc.v20170312.models.NetworkAcl`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetworkAcl, :RequestId
def initialize(networkacl=nil, requestid=nil)
@NetworkAcl = networkacl
@RequestId = requestid
end
def deserialize(params)
unless params['NetworkAcl'].nil?
@NetworkAcl = NetworkAcl.new
@NetworkAcl.deserialize(params['NetworkAcl'])
end
@RequestId = params['RequestId']
end
end
# CreateNetworkInterface请求参数结构体
class CreateNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param NetworkInterfaceName: 弹性网卡名称，最大长度不能超过60个字节。
# @type NetworkInterfaceName: String
# @param SubnetId: 弹性网卡所在的子网实例ID，例如：subnet-0ap8nwca。
# @type SubnetId: String
# @param NetworkInterfaceDescription: 弹性网卡描述，可任意命名，但不得超过60个字符。
# @type NetworkInterfaceDescription: String
# @param SecondaryPrivateIpAddressCount: 新申请的内网IP地址个数，内网IP地址个数总和不能超过配数。
# @type SecondaryPrivateIpAddressCount: Integer
# @param SecurityGroupIds: 指定绑定的安全组，例如：['sg-1dd51d']。
# @type SecurityGroupIds: Array
# @param PrivateIpAddresses: 指定的内网IP信息，单次最多指定10个。
# @type PrivateIpAddresses: Array
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
attr_accessor :VpcId, :NetworkInterfaceName, :SubnetId, :NetworkInterfaceDescription, :SecondaryPrivateIpAddressCount, :SecurityGroupIds, :PrivateIpAddresses, :Tags
def initialize(vpcid=nil, networkinterfacename=nil, subnetid=nil, networkinterfacedescription=nil, secondaryprivateipaddresscount=nil, securitygroupids=nil, privateipaddresses=nil, tags=nil)
@VpcId = vpcid
@NetworkInterfaceName = networkinterfacename
@SubnetId = subnetid
@NetworkInterfaceDescription = networkinterfacedescription
@SecondaryPrivateIpAddressCount = secondaryprivateipaddresscount
@SecurityGroupIds = securitygroupids
@PrivateIpAddresses = privateipaddresses
@Tags = tags
end
def deserialize(params)
@VpcId = params['VpcId']
@NetworkInterfaceName = params['NetworkInterfaceName']
@SubnetId = params['SubnetId']
@NetworkInterfaceDescription = params['NetworkInterfaceDescription']
@SecondaryPrivateIpAddressCount = params['SecondaryPrivateIpAddressCount']
@SecurityGroupIds = params['SecurityGroupIds']
unless params['PrivateIpAddresses'].nil?
@PrivateIpAddresses = []
params['PrivateIpAddresses'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddresses << privateipaddressspecification_tmp
end
end
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateNetworkInterface返回参数结构体
class CreateNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param NetworkInterface: 弹性网卡实例。
# @type NetworkInterface: :class:`Tencentcloud::Vpc.v20170312.models.NetworkInterface`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetworkInterface, :RequestId
def initialize(networkinterface=nil, requestid=nil)
@NetworkInterface = networkinterface
@RequestId = requestid
end
def deserialize(params)
unless params['NetworkInterface'].nil?
@NetworkInterface = NetworkInterface.new
@NetworkInterface.deserialize(params['NetworkInterface'])
end
@RequestId = params['RequestId']
end
end
# CreateRouteTable请求参数结构体
class CreateRouteTableRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 待操作的VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param RouteTableName: 路由表名称，最大长度不能超过60个字节。
# @type RouteTableName: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
attr_accessor :VpcId, :RouteTableName, :Tags
def initialize(vpcid=nil, routetablename=nil, tags=nil)
@VpcId = vpcid
@RouteTableName = routetablename
@Tags = tags
end
def deserialize(params)
@VpcId = params['VpcId']
@RouteTableName = params['RouteTableName']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateRouteTable返回参数结构体
class CreateRouteTableResponse < TencentCloud::Common::AbstractModel
# @param RouteTable: 路由表对象。
# @type RouteTable: :class:`Tencentcloud::Vpc.v20170312.models.RouteTable`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RouteTable, :RequestId
def initialize(routetable=nil, requestid=nil)
@RouteTable = routetable
@RequestId = requestid
end
def deserialize(params)
unless params['RouteTable'].nil?
@RouteTable = RouteTable.new
@RouteTable.deserialize(params['RouteTable'])
end
@RequestId = params['RequestId']
end
end
# CreateRoutes请求参数结构体
class CreateRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID。
# @type RouteTableId: String
# @param Routes: 路由策略对象。
# @type Routes: Array
attr_accessor :RouteTableId, :Routes
def initialize(routetableid=nil, routes=nil)
@RouteTableId = routetableid
@Routes = routes
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@Routes << route_tmp
end
end
end
end
# CreateRoutes返回参数结构体
class CreateRoutesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 新增的实例个数。
# @type TotalCount: Integer
# @param RouteTableSet: 路由表对象。
# @type RouteTableSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteTableSet, :RequestId
def initialize(totalcount=nil, routetableset=nil, requestid=nil)
@TotalCount = totalcount
@RouteTableSet = routetableset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteTableSet'].nil?
@RouteTableSet = []
params['RouteTableSet'].each do |i|
routetable_tmp = RouteTable.new
routetable_tmp.deserialize(i)
@RouteTableSet << routetable_tmp
end
end
@RequestId = params['RequestId']
end
end
# CreateSecurityGroupPolicies请求参数结构体
class CreateSecurityGroupPoliciesRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param SecurityGroupPolicySet: 安全组规则集合。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
attr_accessor :SecurityGroupId, :SecurityGroupPolicySet
def initialize(securitygroupid=nil, securitygrouppolicyset=nil)
@SecurityGroupId = securitygroupid
@SecurityGroupPolicySet = securitygrouppolicyset
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
end
end
# CreateSecurityGroupPolicies返回参数结构体
class CreateSecurityGroupPoliciesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateSecurityGroup请求参数结构体
class CreateSecurityGroupRequest < TencentCloud::Common::AbstractModel
# @param GroupName: 安全组名称，可任意命名，但不得超过60个字符。
# @type GroupName: String
# @param GroupDescription: 安全组备注，最多100个字符。
# @type GroupDescription: String
# @param ProjectId: 项目ID，默认0。可在qcloud控制台项目管理页面查询到。
# @type ProjectId: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
attr_accessor :GroupName, :GroupDescription, :ProjectId, :Tags
def initialize(groupname=nil, groupdescription=nil, projectid=nil, tags=nil)
@GroupName = groupname
@GroupDescription = groupdescription
@ProjectId = projectid
@Tags = tags
end
def deserialize(params)
@GroupName = params['GroupName']
@GroupDescription = params['GroupDescription']
@ProjectId = params['ProjectId']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateSecurityGroup返回参数结构体
class CreateSecurityGroupResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroup: 安全组对象。
# @type SecurityGroup: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroup, :RequestId
def initialize(securitygroup=nil, requestid=nil)
@SecurityGroup = securitygroup
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroup'].nil?
@SecurityGroup = SecurityGroup.new
@SecurityGroup.deserialize(params['SecurityGroup'])
end
@RequestId = params['RequestId']
end
end
# CreateSecurityGroupWithPolicies请求参数结构体
class CreateSecurityGroupWithPoliciesRequest < TencentCloud::Common::AbstractModel
# @param GroupName: 安全组名称，可任意命名，但不得超过60个字符。
# @type GroupName: String
# @param GroupDescription: 安全组备注，最多100个字符。
# @type GroupDescription: String
# @param ProjectId: 项目ID，默认0。可在qcloud控制台项目管理页面查询到。
# @type ProjectId: String
# @param SecurityGroupPolicySet: 安全组规则集合。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
attr_accessor :GroupName, :GroupDescription, :ProjectId, :SecurityGroupPolicySet
def initialize(groupname=nil, groupdescription=nil, projectid=nil, securitygrouppolicyset=nil)
@GroupName = groupname
@GroupDescription = groupdescription
@ProjectId = projectid
@SecurityGroupPolicySet = securitygrouppolicyset
end
def deserialize(params)
@GroupName = params['GroupName']
@GroupDescription = params['GroupDescription']
@ProjectId = params['ProjectId']
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
end
end
# CreateSecurityGroupWithPolicies返回参数结构体
class CreateSecurityGroupWithPoliciesResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroup: 安全组对象。
# @type SecurityGroup: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroup, :RequestId
def initialize(securitygroup=nil, requestid=nil)
@SecurityGroup = securitygroup
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroup'].nil?
@SecurityGroup = SecurityGroup.new
@SecurityGroup.deserialize(params['SecurityGroup'])
end
@RequestId = params['RequestId']
end
end
# CreateServiceTemplateGroup请求参数结构体
class CreateServiceTemplateGroupRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateGroupName: 协议端口模板集合名称
# @type ServiceTemplateGroupName: String
# @param ServiceTemplateIds: 协议端口模板实例ID，例如：ppm-4dw6agho。
# @type ServiceTemplateIds: Array
attr_accessor :ServiceTemplateGroupName, :ServiceTemplateIds
def initialize(servicetemplategroupname=nil, servicetemplateids=nil)
@ServiceTemplateGroupName = servicetemplategroupname
@ServiceTemplateIds = servicetemplateids
end
def deserialize(params)
@ServiceTemplateGroupName = params['ServiceTemplateGroupName']
@ServiceTemplateIds = params['ServiceTemplateIds']
end
end
# CreateServiceTemplateGroup返回参数结构体
class CreateServiceTemplateGroupResponse < TencentCloud::Common::AbstractModel
# @param ServiceTemplateGroup: 协议端口模板集合对象。
# @type ServiceTemplateGroup: :class:`Tencentcloud::Vpc.v20170312.models.ServiceTemplateGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceTemplateGroup, :RequestId
def initialize(servicetemplategroup=nil, requestid=nil)
@ServiceTemplateGroup = servicetemplategroup
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceTemplateGroup'].nil?
@ServiceTemplateGroup = ServiceTemplateGroup.new
@ServiceTemplateGroup.deserialize(params['ServiceTemplateGroup'])
end
@RequestId = params['RequestId']
end
end
# CreateServiceTemplate请求参数结构体
class CreateServiceTemplateRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateName: 协议端口模板名称
# @type ServiceTemplateName: String
# @param Services: 支持单个端口、多个端口、连续端口及所有端口，协议支持：TCP、UDP、ICMP、GRE 协议。Services与ServicesExtra必填其一。
# @type Services: Array
# @param ServicesExtra: 支持添加备注，单个端口、多个端口、连续端口及所有端口，协议支持：TCP、UDP、ICMP、GRE 协议。Services与ServicesExtra必填其一。
# @type ServicesExtra: Array
attr_accessor :ServiceTemplateName, :Services, :ServicesExtra
def initialize(servicetemplatename=nil, services=nil, servicesextra=nil)
@ServiceTemplateName = servicetemplatename
@Services = services
@ServicesExtra = servicesextra
end
def deserialize(params)
@ServiceTemplateName = params['ServiceTemplateName']
@Services = params['Services']
unless params['ServicesExtra'].nil?
@ServicesExtra = []
params['ServicesExtra'].each do |i|
servicesinfo_tmp = ServicesInfo.new
servicesinfo_tmp.deserialize(i)
@ServicesExtra << servicesinfo_tmp
end
end
end
end
# CreateServiceTemplate返回参数结构体
class CreateServiceTemplateResponse < TencentCloud::Common::AbstractModel
# @param ServiceTemplate: 协议端口模板对象。
# @type ServiceTemplate: :class:`Tencentcloud::Vpc.v20170312.models.ServiceTemplate`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceTemplate, :RequestId
def initialize(servicetemplate=nil, requestid=nil)
@ServiceTemplate = servicetemplate
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceTemplate'].nil?
@ServiceTemplate = ServiceTemplate.new
@ServiceTemplate.deserialize(params['ServiceTemplate'])
end
@RequestId = params['RequestId']
end
end
# CreateSubnet请求参数结构体
class CreateSubnetRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 待操作的VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param SubnetName: 子网名称，最大长度不能超过60个字节。
# @type SubnetName: String
# @param CidrBlock: 子网网段，子网网段必须在VPC网段内，相同VPC内子网网段不能重叠。
# @type CidrBlock: String
# @param Zone: 子网所在的可用区ID，不同子网选择不同可用区可以做跨可用区灾备。
# @type Zone: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param CdcId: CDC实例ID。
# @type CdcId: String
attr_accessor :VpcId, :SubnetName, :CidrBlock, :Zone, :Tags, :CdcId
def initialize(vpcid=nil, subnetname=nil, cidrblock=nil, zone=nil, tags=nil, cdcid=nil)
@VpcId = vpcid
@SubnetName = subnetname
@CidrBlock = cidrblock
@Zone = zone
@Tags = tags
@CdcId = cdcid
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetName = params['SubnetName']
@CidrBlock = params['CidrBlock']
@Zone = params['Zone']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@CdcId = params['CdcId']
end
end
# CreateSubnet返回参数结构体
class CreateSubnetResponse < TencentCloud::Common::AbstractModel
# @param Subnet: 子网对象。
# @type Subnet: :class:`Tencentcloud::Vpc.v20170312.models.Subnet`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Subnet, :RequestId
def initialize(subnet=nil, requestid=nil)
@Subnet = subnet
@RequestId = requestid
end
def deserialize(params)
unless params['Subnet'].nil?
@Subnet = Subnet.new
@Subnet.deserialize(params['Subnet'])
end
@RequestId = params['RequestId']
end
end
# CreateSubnets请求参数结构体
class CreateSubnetsRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param Subnets: 子网对象列表。
# @type Subnets: Array
# @param Tags: 指定绑定的标签列表，注意这里的标签集合为列表中所有子网对象所共享，不能为每个子网对象单独指定标签，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param CdcId: 需要增加到的CDC实例ID。
# @type CdcId: String
attr_accessor :VpcId, :Subnets, :Tags, :CdcId
def initialize(vpcid=nil, subnets=nil, tags=nil, cdcid=nil)
@VpcId = vpcid
@Subnets = subnets
@Tags = tags
@CdcId = cdcid
end
def deserialize(params)
@VpcId = params['VpcId']
unless params['Subnets'].nil?
@Subnets = []
params['Subnets'].each do |i|
subnetinput_tmp = SubnetInput.new
subnetinput_tmp.deserialize(i)
@Subnets << subnetinput_tmp
end
end
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@CdcId = params['CdcId']
end
end
# CreateSubnets返回参数结构体
class CreateSubnetsResponse < TencentCloud::Common::AbstractModel
# @param SubnetSet: 新创建的子网列表。
# @type SubnetSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SubnetSet, :RequestId
def initialize(subnetset=nil, requestid=nil)
@SubnetSet = subnetset
@RequestId = requestid
end
def deserialize(params)
unless params['SubnetSet'].nil?
@SubnetSet = []
params['SubnetSet'].each do |i|
subnet_tmp = Subnet.new
subnet_tmp.deserialize(i)
@SubnetSet << subnet_tmp
end
end
@RequestId = params['RequestId']
end
end
# CreateVpcEndPoint请求参数结构体
class CreateVpcEndPointRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param SubnetId: 子网实例ID。
# @type SubnetId: String
# @param EndPointName: 终端节点名称。
# @type EndPointName: String
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
# @param EndPointVip: 终端节点VIP，可以指定IP申请。
# @type EndPointVip: String
# @param SecurityGroupId: 安全组ID。
# @type SecurityGroupId: String
attr_accessor :VpcId, :SubnetId, :EndPointName, :EndPointServiceId, :EndPointVip, :SecurityGroupId
def initialize(vpcid=nil, subnetid=nil, endpointname=nil, endpointserviceid=nil, endpointvip=nil, securitygroupid=nil)
@VpcId = vpcid
@SubnetId = subnetid
@EndPointName = endpointname
@EndPointServiceId = endpointserviceid
@EndPointVip = endpointvip
@SecurityGroupId = securitygroupid
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@EndPointName = params['EndPointName']
@EndPointServiceId = params['EndPointServiceId']
@EndPointVip = params['EndPointVip']
@SecurityGroupId = params['SecurityGroupId']
end
end
# CreateVpcEndPoint返回参数结构体
class CreateVpcEndPointResponse < TencentCloud::Common::AbstractModel
# @param EndPoint: 终端节点对象详细信息。
# @type EndPoint: :class:`Tencentcloud::Vpc.v20170312.models.EndPoint`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EndPoint, :RequestId
def initialize(endpoint=nil, requestid=nil)
@EndPoint = endpoint
@RequestId = requestid
end
def deserialize(params)
unless params['EndPoint'].nil?
@EndPoint = EndPoint.new
@EndPoint.deserialize(params['EndPoint'])
end
@RequestId = params['RequestId']
end
end
# CreateVpcEndPointService请求参数结构体
class CreateVpcEndPointServiceRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param EndPointServiceName: 终端节点服务名称。
# @type EndPointServiceName: String
# @param AutoAcceptFlag: 是否自动接受。
# @type AutoAcceptFlag: Boolean
# @param ServiceInstanceId: 后端服务ID，比如lb-xxx。
# @type ServiceInstanceId: String
# @param IsPassService: 是否是PassService类型。
# @type IsPassService: Boolean
attr_accessor :VpcId, :EndPointServiceName, :AutoAcceptFlag, :ServiceInstanceId, :IsPassService
def initialize(vpcid=nil, endpointservicename=nil, autoacceptflag=nil, serviceinstanceid=nil, ispassservice=nil)
@VpcId = vpcid
@EndPointServiceName = endpointservicename
@AutoAcceptFlag = autoacceptflag
@ServiceInstanceId = serviceinstanceid
@IsPassService = ispassservice
end
def deserialize(params)
@VpcId = params['VpcId']
@EndPointServiceName = params['EndPointServiceName']
@AutoAcceptFlag = params['AutoAcceptFlag']
@ServiceInstanceId = params['ServiceInstanceId']
@IsPassService = params['IsPassService']
end
end
# CreateVpcEndPointService返回参数结构体
class CreateVpcEndPointServiceResponse < TencentCloud::Common::AbstractModel
# @param EndPointService: 终端节点服务对象详细信息。
# @type EndPointService: :class:`Tencentcloud::Vpc.v20170312.models.EndPointService`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EndPointService, :RequestId
def initialize(endpointservice=nil, requestid=nil)
@EndPointService = endpointservice
@RequestId = requestid
end
def deserialize(params)
unless params['EndPointService'].nil?
@EndPointService = EndPointService.new
@EndPointService.deserialize(params['EndPointService'])
end
@RequestId = params['RequestId']
end
end
# CreateVpcEndPointServiceWhiteList请求参数结构体
class CreateVpcEndPointServiceWhiteListRequest < TencentCloud::Common::AbstractModel
# @param UserUin: UIN。
# @type UserUin: String
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
# @param Description: 白名单描述。
# @type Description: String
attr_accessor :UserUin, :EndPointServiceId, :Description
def initialize(useruin=nil, endpointserviceid=nil, description=nil)
@UserUin = useruin
@EndPointServiceId = endpointserviceid
@Description = description
end
def deserialize(params)
@UserUin = params['UserUin']
@EndPointServiceId = params['EndPointServiceId']
@Description = params['Description']
end
end
# CreateVpcEndPointServiceWhiteList返回参数结构体
class CreateVpcEndPointServiceWhiteListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateVpc请求参数结构体
class CreateVpcRequest < TencentCloud::Common::AbstractModel
# @param VpcName: vpc名称，最大长度不能超过60个字节。
# @type VpcName: String
# @param CidrBlock: vpc的cidr，仅能在10.0.0.0/16，172.16.0.0/16，192.168.0.0/16这三个内网网段内。
# @type CidrBlock: String
# @param EnableMulticast: 是否开启组播。true: 开启, false: 不开启。
# @type EnableMulticast: String
# @param DnsServers: DNS地址，最多支持4个。
# @type DnsServers: Array
# @param DomainName: DHCP使用的域名。
# @type DomainName: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]。
# @type Tags: Array
attr_accessor :VpcName, :CidrBlock, :EnableMulticast, :DnsServers, :DomainName, :Tags
def initialize(vpcname=nil, cidrblock=nil, enablemulticast=nil, dnsservers=nil, domainname=nil, tags=nil)
@VpcName = vpcname
@CidrBlock = cidrblock
@EnableMulticast = enablemulticast
@DnsServers = dnsservers
@DomainName = domainname
@Tags = tags
end
def deserialize(params)
@VpcName = params['VpcName']
@CidrBlock = params['CidrBlock']
@EnableMulticast = params['EnableMulticast']
@DnsServers = params['DnsServers']
@DomainName = params['DomainName']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateVpc返回参数结构体
class CreateVpcResponse < TencentCloud::Common::AbstractModel
# @param Vpc: Vpc对象。
# @type Vpc: :class:`Tencentcloud::Vpc.v20170312.models.Vpc`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Vpc, :RequestId
def initialize(vpc=nil, requestid=nil)
@Vpc = vpc
@RequestId = requestid
end
def deserialize(params)
unless params['Vpc'].nil?
@Vpc = Vpc.new
@Vpc.deserialize(params['Vpc'])
end
@RequestId = params['RequestId']
end
end
# CreateVpnConnection请求参数结构体
class CreateVpnConnectionRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param CustomerGatewayId: 对端网关ID，例如：cgw-2wqq41m9，可通过DescribeCustomerGateways接口查询对端网关。
# @type CustomerGatewayId: String
# @param VpnConnectionName: 通道名称，可任意命名，但不得超过60个字符。
# @type VpnConnectionName: String
# @param PreShareKey: 预共享密钥。
# @type PreShareKey: String
# @param VpcId: VPC实例ID。可通过[DescribeVpcs](https://cloud.tencent.com/document/product/215/15778)接口返回值中的VpcId获取。
# CCN VPN 形的通道 可以不传VPCID
# @type VpcId: String
# @param SecurityPolicyDatabases: SPD策略组，例如：{"10.0.0.5/24":["172.123.10.5/16"]}，10.0.0.5/24是vpc内网段172.123.10.5/16是IDC网段。用户指定VPC内哪些网段可以和您IDC中哪些网段通信。
# @type SecurityPolicyDatabases: Array
# @param IKEOptionsSpecification: IKE配置（Internet Key Exchange，因特网密钥交换），IKE具有一套自我保护机制，用户配置网络安全协议
# @type IKEOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IKEOptionsSpecification`
# @param IPSECOptionsSpecification: IPSec配置，腾讯云提供IPSec安全会话设置
# @type IPSECOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IPSECOptionsSpecification`
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param EnableHealthCheck: 是否支持隧道内健康检查
# @type EnableHealthCheck: Boolean
# @param HealthCheckLocalIp: 健康检查本端地址
# @type HealthCheckLocalIp: String
# @param HealthCheckRemoteIp: 健康检查对端地址
# @type HealthCheckRemoteIp: String
# @param RouteType: 通道类型, 例如:["STATIC", "StaticRoute", "Policy"]
# @type RouteType: String
# @param NegotiationType: 协商类型，默认为active（主动协商）。可选值：active（主动协商），passive（被动协商），flowTrigger（流量协商）
# @type NegotiationType: String
# @param DpdEnable: DPD探测开关。默认为0，表示关闭DPD探测。可选值：0（关闭），1（开启）
# @type DpdEnable: Integer
# @param DpdTimeout: DPD超时时间。即探测确认对端不存在需要的时间。dpdEnable为1（开启）时有效。默认30，单位为秒
# @type DpdTimeout: String
# @param DpdAction: DPD超时后的动作。默认为clear。dpdEnable为1（开启）时有效。可取值为clear（断开）和restart（重试）
# @type DpdAction: String
attr_accessor :VpnGatewayId, :CustomerGatewayId, :VpnConnectionName, :PreShareKey, :VpcId, :SecurityPolicyDatabases, :IKEOptionsSpecification, :IPSECOptionsSpecification, :Tags, :EnableHealthCheck, :HealthCheckLocalIp, :HealthCheckRemoteIp, :RouteType, :NegotiationType, :DpdEnable, :DpdTimeout, :DpdAction
def initialize(vpngatewayid=nil, customergatewayid=nil, vpnconnectionname=nil, presharekey=nil, vpcid=nil, securitypolicydatabases=nil, ikeoptionsspecification=nil, ipsecoptionsspecification=nil, tags=nil, enablehealthcheck=nil, healthchecklocalip=nil, healthcheckremoteip=nil, routetype=nil, negotiationtype=nil, dpdenable=nil, dpdtimeout=nil, dpdaction=nil)
@VpnGatewayId = vpngatewayid
@CustomerGatewayId = customergatewayid
@VpnConnectionName = vpnconnectionname
@PreShareKey = presharekey
@VpcId = vpcid
@SecurityPolicyDatabases = securitypolicydatabases
@IKEOptionsSpecification = ikeoptionsspecification
@IPSECOptionsSpecification = ipsecoptionsspecification
@Tags = tags
@EnableHealthCheck = enablehealthcheck
@HealthCheckLocalIp = healthchecklocalip
@HealthCheckRemoteIp = healthcheckremoteip
@RouteType = routetype
@NegotiationType = negotiationtype
@DpdEnable = dpdenable
@DpdTimeout = dpdtimeout
@DpdAction = dpdaction
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@CustomerGatewayId = params['CustomerGatewayId']
@VpnConnectionName = params['VpnConnectionName']
@PreShareKey = params['PreShareKey']
@VpcId = params['VpcId']
unless params['SecurityPolicyDatabases'].nil?
@SecurityPolicyDatabases = []
params['SecurityPolicyDatabases'].each do |i|
securitypolicydatabase_tmp = SecurityPolicyDatabase.new
securitypolicydatabase_tmp.deserialize(i)
@SecurityPolicyDatabases << securitypolicydatabase_tmp
end
end
unless params['IKEOptionsSpecification'].nil?
@IKEOptionsSpecification = IKEOptionsSpecification.new
@IKEOptionsSpecification.deserialize(params['IKEOptionsSpecification'])
end
unless params['IPSECOptionsSpecification'].nil?
@IPSECOptionsSpecification = IPSECOptionsSpecification.new
@IPSECOptionsSpecification.deserialize(params['IPSECOptionsSpecification'])
end
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@EnableHealthCheck = params['EnableHealthCheck']
@HealthCheckLocalIp = params['HealthCheckLocalIp']
@HealthCheckRemoteIp = params['HealthCheckRemoteIp']
@RouteType = params['RouteType']
@NegotiationType = params['NegotiationType']
@DpdEnable = params['DpdEnable']
@DpdTimeout = params['DpdTimeout']
@DpdAction = params['DpdAction']
end
end
# CreateVpnConnection返回参数结构体
class CreateVpnConnectionResponse < TencentCloud::Common::AbstractModel
# @param VpnConnection: 通道实例对象。
# @type VpnConnection: :class:`Tencentcloud::Vpc.v20170312.models.VpnConnection`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VpnConnection, :RequestId
def initialize(vpnconnection=nil, requestid=nil)
@VpnConnection = vpnconnection
@RequestId = requestid
end
def deserialize(params)
unless params['VpnConnection'].nil?
@VpnConnection = VpnConnection.new
@VpnConnection.deserialize(params['VpnConnection'])
end
@RequestId = params['RequestId']
end
end
# CreateVpnGateway请求参数结构体
class CreateVpnGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过[DescribeVpcs](https://cloud.tencent.com/document/product/215/15778)接口返回值中的VpcId获取。
# @type VpcId: String
# @param VpnGatewayName: VPN网关名称，最大长度不能超过60个字节。
# @type VpnGatewayName: String
# @param InternetMaxBandwidthOut: 公网带宽设置。可选带宽规格：5, 10, 20, 50, 100；单位：Mbps
# @type InternetMaxBandwidthOut: Integer
# @param InstanceChargeType: VPN网关计费模式，PREPAID：表示预付费，即包年包月，POSTPAID_BY_HOUR：表示后付费，即按量计费。默认：POSTPAID_BY_HOUR，如果指定预付费模式，参数InstanceChargePrepaid必填。
# @type InstanceChargeType: String
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.InstanceChargePrepaid`
# @param Zone: 可用区，如：ap-guangzhou-2。
# @type Zone: String
# @param Type: VPN网关类型。值“CCN”云联网类型VPN网关，值SSL为SSL-VPN
# @type Type: String
# @param Tags: 指定绑定的标签列表，例如：[{"Key": "city", "Value": "shanghai"}]
# @type Tags: Array
# @param CdcId: CDC实例ID
# @type CdcId: String
# @param MaxConnection: SSL-VPN 最大CLIENT 连接数。可选 [5, 10, 20, 50, 100]。仅SSL-VPN 需要选这个参数。
# @type MaxConnection: Integer
attr_accessor :VpcId, :VpnGatewayName, :InternetMaxBandwidthOut, :InstanceChargeType, :InstanceChargePrepaid, :Zone, :Type, :Tags, :CdcId, :MaxConnection
def initialize(vpcid=nil, vpngatewayname=nil, internetmaxbandwidthout=nil, instancechargetype=nil, instancechargeprepaid=nil, zone=nil, type=nil, tags=nil, cdcid=nil, maxconnection=nil)
@VpcId = vpcid
@VpnGatewayName = vpngatewayname
@InternetMaxBandwidthOut = internetmaxbandwidthout
@InstanceChargeType = instancechargetype
@InstanceChargePrepaid = instancechargeprepaid
@Zone = zone
@Type = type
@Tags = tags
@CdcId = cdcid
@MaxConnection = maxconnection
end
def deserialize(params)
@VpcId = params['VpcId']
@VpnGatewayName = params['VpnGatewayName']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@InstanceChargeType = params['InstanceChargeType']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
@Zone = params['Zone']
@Type = params['Type']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@CdcId = params['CdcId']
@MaxConnection = params['MaxConnection']
end
end
# CreateVpnGateway返回参数结构体
class CreateVpnGatewayResponse < TencentCloud::Common::AbstractModel
# @param VpnGateway: VPN网关对象
# @type VpnGateway: :class:`Tencentcloud::Vpc.v20170312.models.VpnGateway`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VpnGateway, :RequestId
def initialize(vpngateway=nil, requestid=nil)
@VpnGateway = vpngateway
@RequestId = requestid
end
def deserialize(params)
unless params['VpnGateway'].nil?
@VpnGateway = VpnGateway.new
@VpnGateway.deserialize(params['VpnGateway'])
end
@RequestId = params['RequestId']
end
end
# CreateVpnGatewayRoutes请求参数结构体
class CreateVpnGatewayRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关的ID
# @type VpnGatewayId: String
# @param Routes: VPN网关目的路由列表
# @type Routes: Array
attr_accessor :VpnGatewayId, :Routes
def initialize(vpngatewayid=nil, routes=nil)
@VpnGatewayId = vpngatewayid
@Routes = routes
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngatewayroute_tmp = VpnGatewayRoute.new
vpngatewayroute_tmp.deserialize(i)
@Routes << vpngatewayroute_tmp
end
end
end
end
# CreateVpnGatewayRoutes返回参数结构体
class CreateVpnGatewayRoutesResponse < TencentCloud::Common::AbstractModel
# @param Routes: VPN网关目的路由
# @type Routes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Routes, :RequestId
def initialize(routes=nil, requestid=nil)
@Routes = routes
@RequestId = requestid
end
def deserialize(params)
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngatewayroute_tmp = VpnGatewayRoute.new
vpngatewayroute_tmp.deserialize(i)
@Routes << vpngatewayroute_tmp
end
end
@RequestId = params['RequestId']
end
end
# 合规化审批单
class CrossBorderCompliance < TencentCloud::Common::AbstractModel
# @param ServiceProvider: 服务商，可选值：`UNICOM`。
# @type ServiceProvider: String
# @param ComplianceId: 合规化审批单`ID`。
# @type ComplianceId: Integer
# @param Company: 公司全称。
# @type Company: String
# @param UniformSocialCreditCode: 统一社会信用代码。
# @type UniformSocialCreditCode: String
# @param LegalPerson: 法定代表人。
# @type LegalPerson: String
# @param IssuingAuthority: 发证机关。
# @type IssuingAuthority: String
# @param BusinessLicense: 营业执照。
# @type BusinessLicense: String
# @param BusinessAddress: 营业执照住所。
# @type BusinessAddress: String
# @param PostCode: 邮编。
# @type PostCode: Integer
# @param Manager: 经办人。
# @type Manager: String
# @param ManagerId: 经办人身份证号。
# @type ManagerId: String
# @param ManagerIdCard: 经办人身份证。
# @type ManagerIdCard: String
# @param ManagerAddress: 经办人身份证地址。
# @type ManagerAddress: String
# @param ManagerTelephone: 经办人联系电话。
# @type ManagerTelephone: String
# @param Email: 电子邮箱。
# @type Email: String
# @param ServiceHandlingForm: 服务受理单。
# @type ServiceHandlingForm: String
# @param AuthorizationLetter: 授权函。
# @type AuthorizationLetter: String
# @param SafetyCommitment: 信息安全承诺书。
# @type SafetyCommitment: String
# @param ServiceStartDate: 服务开始时间。
# @type ServiceStartDate: String
# @param ServiceEndDate: 服务截止时间。
# @type ServiceEndDate: String
# @param State: 状态。待审批：`PENDING`，已通过：`APPROVED`，已拒绝：`DENY`。
# @type State: String
# @param CreatedTime: 审批单创建时间。
# @type CreatedTime: String
attr_accessor :ServiceProvider, :ComplianceId, :Company, :UniformSocialCreditCode, :LegalPerson, :IssuingAuthority, :BusinessLicense, :BusinessAddress, :PostCode, :Manager, :ManagerId, :ManagerIdCard, :ManagerAddress, :ManagerTelephone, :Email, :ServiceHandlingForm, :AuthorizationLetter, :SafetyCommitment, :ServiceStartDate, :ServiceEndDate, :State, :CreatedTime
def initialize(serviceprovider=nil, complianceid=nil, company=nil, uniformsocialcreditcode=nil, legalperson=nil, issuingauthority=nil, businesslicense=nil, businessaddress=nil, postcode=nil, manager=nil, managerid=nil, manageridcard=nil, manageraddress=nil, managertelephone=nil, email=nil, servicehandlingform=nil, authorizationletter=nil, safetycommitment=nil, servicestartdate=nil, serviceenddate=nil, state=nil, createdtime=nil)
@ServiceProvider = serviceprovider
@ComplianceId = complianceid
@Company = company
@UniformSocialCreditCode = uniformsocialcreditcode
@LegalPerson = legalperson
@IssuingAuthority = issuingauthority
@BusinessLicense = businesslicense
@BusinessAddress = businessaddress
@PostCode = postcode
@Manager = manager
@ManagerId = managerid
@ManagerIdCard = manageridcard
@ManagerAddress = manageraddress
@ManagerTelephone = managertelephone
@Email = email
@ServiceHandlingForm = servicehandlingform
@AuthorizationLetter = authorizationletter
@SafetyCommitment = safetycommitment
@ServiceStartDate = servicestartdate
@ServiceEndDate = serviceenddate
@State = state
@CreatedTime = createdtime
end
def deserialize(params)
@ServiceProvider = params['ServiceProvider']
@ComplianceId = params['ComplianceId']
@Company = params['Company']
@UniformSocialCreditCode = params['UniformSocialCreditCode']
@LegalPerson = params['LegalPerson']
@IssuingAuthority = params['IssuingAuthority']
@BusinessLicense = params['BusinessLicense']
@BusinessAddress = params['BusinessAddress']
@PostCode = params['PostCode']
@Manager = params['Manager']
@ManagerId = params['ManagerId']
@ManagerIdCard = params['ManagerIdCard']
@ManagerAddress = params['ManagerAddress']
@ManagerTelephone = params['ManagerTelephone']
@Email = params['Email']
@ServiceHandlingForm = params['ServiceHandlingForm']
@AuthorizationLetter = params['AuthorizationLetter']
@SafetyCommitment = params['SafetyCommitment']
@ServiceStartDate = params['ServiceStartDate']
@ServiceEndDate = params['ServiceEndDate']
@State = params['State']
@CreatedTime = params['CreatedTime']
end
end
# 对端网关
class CustomerGateway < TencentCloud::Common::AbstractModel
# @param CustomerGatewayId: 用户网关唯一ID
# @type CustomerGatewayId: String
# @param CustomerGatewayName: 网关名称
# @type CustomerGatewayName: String
# @param IpAddress: 公网地址
# @type IpAddress: String
# @param CreatedTime: 创建时间
# @type CreatedTime: String
attr_accessor :CustomerGatewayId, :CustomerGatewayName, :IpAddress, :CreatedTime
def initialize(customergatewayid=nil, customergatewayname=nil, ipaddress=nil, createdtime=nil)
@CustomerGatewayId = customergatewayid
@CustomerGatewayName = customergatewayname
@IpAddress = ipaddress
@CreatedTime = createdtime
end
def deserialize(params)
@CustomerGatewayId = params['CustomerGatewayId']
@CustomerGatewayName = params['CustomerGatewayName']
@IpAddress = params['IpAddress']
@CreatedTime = params['CreatedTime']
end
end
# 对端网关厂商信息对象。
class CustomerGatewayVendor < TencentCloud::Common::AbstractModel
# @param Platform: 平台。
# @type Platform: String
# @param SoftwareVersion: 软件版本。
# @type SoftwareVersion: String
# @param VendorName: 供应商名称。
# @type VendorName: String
attr_accessor :Platform, :SoftwareVersion, :VendorName
def initialize(platform=nil, softwareversion=nil, vendorname=nil)
@Platform = platform
@SoftwareVersion = softwareversion
@VendorName = vendorname
end
def deserialize(params)
@Platform = params['Platform']
@SoftwareVersion = params['SoftwareVersion']
@VendorName = params['VendorName']
end
end
# 云主机实例信息。
class CvmInstance < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param SubnetId: 子网实例ID。
# @type SubnetId: String
# @param InstanceId: 云主机实例ID
# @type InstanceId: String
# @param InstanceName: 云主机名称。
# @type InstanceName: String
# @param InstanceState: 云主机状态。
# @type InstanceState: String
# @param CPU: 实例的CPU核数，单位：核。
# @type CPU: Integer
# @param Memory: 实例内存容量，单位：GB。
# @type Memory: Integer
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param InstanceType: 实例机型。
# @type InstanceType: String
# @param EniLimit: 实例弹性网卡配额（包含主网卡）。
# @type EniLimit: Integer
# @param EniIpLimit: 实例弹性网卡内网IP配额（包含主网卡）。
# @type EniIpLimit: Integer
# @param InstanceEniCount: 实例已绑定弹性网卡的个数（包含主网卡）。
# @type InstanceEniCount: Integer
attr_accessor :VpcId, :SubnetId, :InstanceId, :InstanceName, :InstanceState, :CPU, :Memory, :CreatedTime, :InstanceType, :EniLimit, :EniIpLimit, :InstanceEniCount
def initialize(vpcid=nil, subnetid=nil, instanceid=nil, instancename=nil, instancestate=nil, cpu=nil, memory=nil, createdtime=nil, instancetype=nil, enilimit=nil, eniiplimit=nil, instanceenicount=nil)
@VpcId = vpcid
@SubnetId = subnetid
@InstanceId = instanceid
@InstanceName = instancename
@InstanceState = instancestate
@CPU = cpu
@Memory = memory
@CreatedTime = createdtime
@InstanceType = instancetype
@EniLimit = enilimit
@EniIpLimit = eniiplimit
@InstanceEniCount = instanceenicount
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceState = params['InstanceState']
@CPU = params['CPU']
@Memory = params['Memory']
@CreatedTime = params['CreatedTime']
@InstanceType = params['InstanceType']
@EniLimit = params['EniLimit']
@EniIpLimit = params['EniIpLimit']
@InstanceEniCount = params['InstanceEniCount']
end
end
# 默认VPC和子网
class DefaultVpcSubnet < TencentCloud::Common::AbstractModel
# @param VpcId: 默认VpcId
# @type VpcId: String
# @param SubnetId: 默认SubnetId
# @type SubnetId: String
attr_accessor :VpcId, :SubnetId
def initialize(vpcid=nil, subnetid=nil)
@VpcId = vpcid
@SubnetId = subnetid
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
end
end
# DeleteAddressTemplateGroup请求参数结构体
class DeleteAddressTemplateGroupRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateGroupId: IP地址模板集合实例ID，例如：ipmg-90cex8mq。
# @type AddressTemplateGroupId: String
attr_accessor :AddressTemplateGroupId
def initialize(addresstemplategroupid=nil)
@AddressTemplateGroupId = addresstemplategroupid
end
def deserialize(params)
@AddressTemplateGroupId = params['AddressTemplateGroupId']
end
end
# DeleteAddressTemplateGroup返回参数结构体
class DeleteAddressTemplateGroupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAddressTemplate请求参数结构体
class DeleteAddressTemplateRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateId: IP地址模板实例ID，例如：ipm-09o5m8kc。
# @type AddressTemplateId: String
attr_accessor :AddressTemplateId
def initialize(addresstemplateid=nil)
@AddressTemplateId = addresstemplateid
end
def deserialize(params)
@AddressTemplateId = params['AddressTemplateId']
end
end
# DeleteAddressTemplate返回参数结构体
class DeleteAddressTemplateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAssistantCidr请求参数结构体
class DeleteAssistantCidrRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param CidrBlocks: CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]
# @type CidrBlocks: Array
attr_accessor :VpcId, :CidrBlocks
def initialize(vpcid=nil, cidrblocks=nil)
@VpcId = vpcid
@CidrBlocks = cidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
@CidrBlocks = params['CidrBlocks']
end
end
# DeleteAssistantCidr返回参数结构体
class DeleteAssistantCidrResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteBandwidthPackage请求参数结构体
class DeleteBandwidthPackageRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 待删除带宽包唯一ID
# @type BandwidthPackageId: String
attr_accessor :BandwidthPackageId
def initialize(bandwidthpackageid=nil)
@BandwidthPackageId = bandwidthpackageid
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
end
end
# DeleteBandwidthPackage返回参数结构体
class DeleteBandwidthPackageResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteCcn请求参数结构体
class DeleteCcnRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
attr_accessor :CcnId
def initialize(ccnid=nil)
@CcnId = ccnid
end
def deserialize(params)
@CcnId = params['CcnId']
end
end
# DeleteCcn返回参数结构体
class DeleteCcnResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteCustomerGateway请求参数结构体
class DeleteCustomerGatewayRequest < TencentCloud::Common::AbstractModel
# @param CustomerGatewayId: 对端网关ID，例如：cgw-2wqq41m9，可通过DescribeCustomerGateways接口查询对端网关。
# @type CustomerGatewayId: String
attr_accessor :CustomerGatewayId
def initialize(customergatewayid=nil)
@CustomerGatewayId = customergatewayid
end
def deserialize(params)
@CustomerGatewayId = params['CustomerGatewayId']
end
end
# DeleteCustomerGateway返回参数结构体
class DeleteCustomerGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDhcpIp请求参数结构体
class DeleteDhcpIpRequest < TencentCloud::Common::AbstractModel
# @param DhcpIpId: `DhcpIp`的`ID`，是`DhcpIp`的唯一标识。
# @type DhcpIpId: String
attr_accessor :DhcpIpId
def initialize(dhcpipid=nil)
@DhcpIpId = dhcpipid
end
def deserialize(params)
@DhcpIpId = params['DhcpIpId']
end
end
# DeleteDhcpIp返回参数结构体
class DeleteDhcpIpResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDirectConnectGatewayCcnRoutes请求参数结构体
class DeleteDirectConnectGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关ID，形如：dcg-prpqlmg1
# @type DirectConnectGatewayId: String
# @param RouteIds: 路由ID。形如：ccnr-f49l6u0z。
# @type RouteIds: Array
attr_accessor :DirectConnectGatewayId, :RouteIds
def initialize(directconnectgatewayid=nil, routeids=nil)
@DirectConnectGatewayId = directconnectgatewayid
@RouteIds = routeids
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@RouteIds = params['RouteIds']
end
end
# DeleteDirectConnectGatewayCcnRoutes返回参数结构体
class DeleteDirectConnectGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDirectConnectGateway请求参数结构体
class DeleteDirectConnectGatewayRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关唯一`ID`，形如：`dcg-9o233uri`。
# @type DirectConnectGatewayId: String
attr_accessor :DirectConnectGatewayId
def initialize(directconnectgatewayid=nil)
@DirectConnectGatewayId = directconnectgatewayid
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
end
end
# DeleteDirectConnectGateway返回参数结构体
class DeleteDirectConnectGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteFlowLog请求参数结构体
class DeleteFlowLogRequest < TencentCloud::Common::AbstractModel
# @param FlowLogId: 流日志唯一ID
# @type FlowLogId: String
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID，删除云联网流日志时，可不填，其他流日志类型必填。
# @type VpcId: String
attr_accessor :FlowLogId, :VpcId
def initialize(flowlogid=nil, vpcid=nil)
@FlowLogId = flowlogid
@VpcId = vpcid
end
def deserialize(params)
@FlowLogId = params['FlowLogId']
@VpcId = params['VpcId']
end
end
# DeleteFlowLog返回参数结构体
class DeleteFlowLogResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteHaVip请求参数结构体
class DeleteHaVipRequest < TencentCloud::Common::AbstractModel
# @param HaVipId: `HAVIP`唯一`ID`，形如：`havip-9o233uri`。
# @type HaVipId: String
attr_accessor :HaVipId
def initialize(havipid=nil)
@HaVipId = havipid
end
def deserialize(params)
@HaVipId = params['HaVipId']
end
end
# DeleteHaVip返回参数结构体
class DeleteHaVipResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteIp6Translators请求参数结构体
class DeleteIp6TranslatorsRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorIds: 待释放的IPV6转换实例的唯一ID，形如‘ip6-xxxxxxxx’
# @type Ip6TranslatorIds: Array
attr_accessor :Ip6TranslatorIds
def initialize(ip6translatorids=nil)
@Ip6TranslatorIds = ip6translatorids
end
def deserialize(params)
@Ip6TranslatorIds = params['Ip6TranslatorIds']
end
end
# DeleteIp6Translators返回参数结构体
class DeleteIp6TranslatorsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteLocalGateway请求参数结构体
class DeleteLocalGatewayRequest < TencentCloud::Common::AbstractModel
# @param LocalGatewayId: 本地网关实例ID
# @type LocalGatewayId: String
# @param CdcId: CDC实例ID
# @type CdcId: String
# @param VpcId: VPC实例ID
# @type VpcId: String
attr_accessor :LocalGatewayId, :CdcId, :VpcId
def initialize(localgatewayid=nil, cdcid=nil, vpcid=nil)
@LocalGatewayId = localgatewayid
@CdcId = cdcid
@VpcId = vpcid
end
def deserialize(params)
@LocalGatewayId = params['LocalGatewayId']
@CdcId = params['CdcId']
@VpcId = params['VpcId']
end
end
# DeleteLocalGateway返回参数结构体
class DeleteLocalGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNatGatewayDestinationIpPortTranslationNatRule请求参数结构体
class DeleteNatGatewayDestinationIpPortTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param DestinationIpPortTranslationNatRules: NAT网关的端口转换规则。
# @type DestinationIpPortTranslationNatRules: Array
attr_accessor :NatGatewayId, :DestinationIpPortTranslationNatRules
def initialize(natgatewayid=nil, destinationipporttranslationnatrules=nil)
@NatGatewayId = natgatewayid
@DestinationIpPortTranslationNatRules = destinationipporttranslationnatrules
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['DestinationIpPortTranslationNatRules'].nil?
@DestinationIpPortTranslationNatRules = []
params['DestinationIpPortTranslationNatRules'].each do |i|
destinationipporttranslationnatrule_tmp = DestinationIpPortTranslationNatRule.new
destinationipporttranslationnatrule_tmp.deserialize(i)
@DestinationIpPortTranslationNatRules << destinationipporttranslationnatrule_tmp
end
end
end
end
# DeleteNatGatewayDestinationIpPortTranslationNatRule返回参数结构体
class DeleteNatGatewayDestinationIpPortTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNatGateway请求参数结构体
class DeleteNatGatewayRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
attr_accessor :NatGatewayId
def initialize(natgatewayid=nil)
@NatGatewayId = natgatewayid
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
end
end
# DeleteNatGateway返回参数结构体
class DeleteNatGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNatGatewaySourceIpTranslationNatRule请求参数结构体
class DeleteNatGatewaySourceIpTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param NatGatewaySnatIds: NAT网关的SNAT ID列表，形如：`snat-df43254`。
# @type NatGatewaySnatIds: Array
attr_accessor :NatGatewayId, :NatGatewaySnatIds
def initialize(natgatewayid=nil, natgatewaysnatids=nil)
@NatGatewayId = natgatewayid
@NatGatewaySnatIds = natgatewaysnatids
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@NatGatewaySnatIds = params['NatGatewaySnatIds']
end
end
# DeleteNatGatewaySourceIpTranslationNatRule返回参数结构体
class DeleteNatGatewaySourceIpTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNetDetect请求参数结构体
class DeleteNetDetectRequest < TencentCloud::Common::AbstractModel
# @param NetDetectId: 网络探测实例`ID`。形如：`netd-12345678`
# @type NetDetectId: String
attr_accessor :NetDetectId
def initialize(netdetectid=nil)
@NetDetectId = netdetectid
end
def deserialize(params)
@NetDetectId = params['NetDetectId']
end
end
# DeleteNetDetect返回参数结构体
class DeleteNetDetectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNetworkAcl请求参数结构体
class DeleteNetworkAclRequest < TencentCloud::Common::AbstractModel
# @param NetworkAclId: 网络ACL实例ID。例如：acl-12345678。
# @type NetworkAclId: String
attr_accessor :NetworkAclId
def initialize(networkaclid=nil)
@NetworkAclId = networkaclid
end
def deserialize(params)
@NetworkAclId = params['NetworkAclId']
end
end
# DeleteNetworkAcl返回参数结构体
class DeleteNetworkAclResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteNetworkInterface请求参数结构体
class DeleteNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
attr_accessor :NetworkInterfaceId
def initialize(networkinterfaceid=nil)
@NetworkInterfaceId = networkinterfaceid
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
end
end
# DeleteNetworkInterface返回参数结构体
class DeleteNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteRouteTable请求参数结构体
class DeleteRouteTableRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
attr_accessor :RouteTableId
def initialize(routetableid=nil)
@RouteTableId = routetableid
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
end
end
# DeleteRouteTable返回参数结构体
class DeleteRouteTableResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteRoutes请求参数结构体
class DeleteRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID。
# @type RouteTableId: String
# @param Routes: 路由策略对象，删除路由策略时，仅需使用Route的RouteId字段。
# @type Routes: Array
attr_accessor :RouteTableId, :Routes
def initialize(routetableid=nil, routes=nil)
@RouteTableId = routetableid
@Routes = routes
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@Routes << route_tmp
end
end
end
end
# DeleteRoutes返回参数结构体
class DeleteRoutesResponse < TencentCloud::Common::AbstractModel
# @param RouteSet: 已删除的路由策略详情。
# @type RouteSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RouteSet, :RequestId
def initialize(routeset=nil, requestid=nil)
@RouteSet = routeset
@RequestId = requestid
end
def deserialize(params)
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@RouteSet << route_tmp
end
end
@RequestId = params['RequestId']
end
end
# DeleteSecurityGroupPolicies请求参数结构体
class DeleteSecurityGroupPoliciesRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param SecurityGroupPolicySet: 安全组规则集合。一个请求中只能删除单个方向的一条或多条规则。支持指定索引（PolicyIndex） 匹配删除和安全组规则匹配删除两种方式，一个请求中只能使用一种匹配方式。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
attr_accessor :SecurityGroupId, :SecurityGroupPolicySet
def initialize(securitygroupid=nil, securitygrouppolicyset=nil)
@SecurityGroupId = securitygroupid
@SecurityGroupPolicySet = securitygrouppolicyset
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
end
end
# DeleteSecurityGroupPolicies返回参数结构体
class DeleteSecurityGroupPoliciesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteSecurityGroup请求参数结构体
class DeleteSecurityGroupRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
attr_accessor :SecurityGroupId
def initialize(securitygroupid=nil)
@SecurityGroupId = securitygroupid
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
end
end
# DeleteSecurityGroup返回参数结构体
class DeleteSecurityGroupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteServiceTemplateGroup请求参数结构体
class DeleteServiceTemplateGroupRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateGroupId: 协议端口模板集合实例ID，例如：ppmg-n17uxvve。
# @type ServiceTemplateGroupId: String
attr_accessor :ServiceTemplateGroupId
def initialize(servicetemplategroupid=nil)
@ServiceTemplateGroupId = servicetemplategroupid
end
def deserialize(params)
@ServiceTemplateGroupId = params['ServiceTemplateGroupId']
end
end
# DeleteServiceTemplateGroup返回参数结构体
class DeleteServiceTemplateGroupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteServiceTemplate请求参数结构体
class DeleteServiceTemplateRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateId: 协议端口模板实例ID，例如：ppm-e6dy460g。
# @type ServiceTemplateId: String
attr_accessor :ServiceTemplateId
def initialize(servicetemplateid=nil)
@ServiceTemplateId = servicetemplateid
end
def deserialize(params)
@ServiceTemplateId = params['ServiceTemplateId']
end
end
# DeleteServiceTemplate返回参数结构体
class DeleteServiceTemplateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteSubnet请求参数结构体
class DeleteSubnetRequest < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网实例ID。可通过DescribeSubnets接口返回值中的SubnetId获取。
# @type SubnetId: String
attr_accessor :SubnetId
def initialize(subnetid=nil)
@SubnetId = subnetid
end
def deserialize(params)
@SubnetId = params['SubnetId']
end
end
# DeleteSubnet返回参数结构体
class DeleteSubnetResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteTemplateMember请求参数结构体
class DeleteTemplateMemberRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 参数模板实例ID，支持IP地址、协议端口、IP地址组、协议端口组四种参数模板的实例ID。
# @type TemplateId: String
# @param TemplateMember: 需要添加的参数模板成员信息，支持IP地址、协议端口、IP地址组、协议端口组四种类型，类型需要与TemplateId参数类型一致。
# @type TemplateMember: Array
attr_accessor :TemplateId, :TemplateMember
def initialize(templateid=nil, templatemember=nil)
@TemplateId = templateid
@TemplateMember = templatemember
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['TemplateMember'].nil?
@TemplateMember = []
params['TemplateMember'].each do |i|
memberinfo_tmp = MemberInfo.new
memberinfo_tmp.deserialize(i)
@TemplateMember << memberinfo_tmp
end
end
end
end
# DeleteTemplateMember返回参数结构体
class DeleteTemplateMemberResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpcEndPoint请求参数结构体
class DeleteVpcEndPointRequest < TencentCloud::Common::AbstractModel
# @param EndPointId: 终端节点ID。
# @type EndPointId: String
attr_accessor :EndPointId
def initialize(endpointid=nil)
@EndPointId = endpointid
end
def deserialize(params)
@EndPointId = params['EndPointId']
end
end
# DeleteVpcEndPoint返回参数结构体
class DeleteVpcEndPointResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpcEndPointService请求参数结构体
class DeleteVpcEndPointServiceRequest < TencentCloud::Common::AbstractModel
# @param EndPointServiceId: 终端节点ID。
# @type EndPointServiceId: String
attr_accessor :EndPointServiceId
def initialize(endpointserviceid=nil)
@EndPointServiceId = endpointserviceid
end
def deserialize(params)
@EndPointServiceId = params['EndPointServiceId']
end
end
# DeleteVpcEndPointService返回参数结构体
class DeleteVpcEndPointServiceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpcEndPointServiceWhiteList请求参数结构体
class DeleteVpcEndPointServiceWhiteListRequest < TencentCloud::Common::AbstractModel
# @param UserUin: 用户UIN数组。
# @type UserUin: Array
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
attr_accessor :UserUin, :EndPointServiceId
def initialize(useruin=nil, endpointserviceid=nil)
@UserUin = useruin
@EndPointServiceId = endpointserviceid
end
def deserialize(params)
@UserUin = params['UserUin']
@EndPointServiceId = params['EndPointServiceId']
end
end
# DeleteVpcEndPointServiceWhiteList返回参数结构体
class DeleteVpcEndPointServiceWhiteListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpc请求参数结构体
class DeleteVpcRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
attr_accessor :VpcId
def initialize(vpcid=nil)
@VpcId = vpcid
end
def deserialize(params)
@VpcId = params['VpcId']
end
end
# DeleteVpc返回参数结构体
class DeleteVpcResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpnConnection请求参数结构体
class DeleteVpnConnectionRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param VpnConnectionId: VPN通道实例ID。形如：vpnx-f49l6u0z。
# @type VpnConnectionId: String
attr_accessor :VpnGatewayId, :VpnConnectionId
def initialize(vpngatewayid=nil, vpnconnectionid=nil)
@VpnGatewayId = vpngatewayid
@VpnConnectionId = vpnconnectionid
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@VpnConnectionId = params['VpnConnectionId']
end
end
# DeleteVpnConnection返回参数结构体
class DeleteVpnConnectionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpnGateway请求参数结构体
class DeleteVpnGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
attr_accessor :VpnGatewayId
def initialize(vpngatewayid=nil)
@VpnGatewayId = vpngatewayid
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
end
end
# DeleteVpnGateway返回参数结构体
class DeleteVpnGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteVpnGatewayRoutes请求参数结构体
class DeleteVpnGatewayRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID
# @type VpnGatewayId: String
# @param RouteIds: 路由ID信息列表
# @type RouteIds: Array
attr_accessor :VpnGatewayId, :RouteIds
def initialize(vpngatewayid=nil, routeids=nil)
@VpnGatewayId = vpngatewayid
@RouteIds = routeids
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@RouteIds = params['RouteIds']
end
end
# DeleteVpnGatewayRoutes返回参数结构体
class DeleteVpnGatewayRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccountAttributes请求参数结构体
class DescribeAccountAttributesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAccountAttributes返回参数结构体
class DescribeAccountAttributesResponse < TencentCloud::Common::AbstractModel
# @param AccountAttributeSet: 用户账号属性对象
# @type AccountAttributeSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AccountAttributeSet, :RequestId
def initialize(accountattributeset=nil, requestid=nil)
@AccountAttributeSet = accountattributeset
@RequestId = requestid
end
def deserialize(params)
unless params['AccountAttributeSet'].nil?
@AccountAttributeSet = []
params['AccountAttributeSet'].each do |i|
accountattribute_tmp = AccountAttribute.new
accountattribute_tmp.deserialize(i)
@AccountAttributeSet << accountattribute_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAddressQuota请求参数结构体
class DescribeAddressQuotaRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAddressQuota返回参数结构体
class DescribeAddressQuotaResponse < TencentCloud::Common::AbstractModel
# @param QuotaSet: 账户 EIP 配额信息。
# @type QuotaSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :QuotaSet, :RequestId
def initialize(quotaset=nil, requestid=nil)
@QuotaSet = quotaset
@RequestId = requestid
end
def deserialize(params)
unless params['QuotaSet'].nil?
@QuotaSet = []
params['QuotaSet'].each do |i|
quota_tmp = Quota.new
quota_tmp.deserialize(i)
@QuotaSet << quota_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAddressTemplateGroups请求参数结构体
class DescribeAddressTemplateGroupsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# address-template-group-name - String - （过滤条件）IP地址模板集合名称。
# address-template-group-id - String - （过滤条件）IP地址模板实集合例ID，例如：ipmg-mdunqeb6。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAddressTemplateGroups返回参数结构体
class DescribeAddressTemplateGroupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param AddressTemplateGroupSet: IP地址模板。
# @type AddressTemplateGroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AddressTemplateGroupSet, :RequestId
def initialize(totalcount=nil, addresstemplategroupset=nil, requestid=nil)
@TotalCount = totalcount
@AddressTemplateGroupSet = addresstemplategroupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AddressTemplateGroupSet'].nil?
@AddressTemplateGroupSet = []
params['AddressTemplateGroupSet'].each do |i|
addresstemplategroup_tmp = AddressTemplateGroup.new
addresstemplategroup_tmp.deserialize(i)
@AddressTemplateGroupSet << addresstemplategroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAddressTemplates请求参数结构体
class DescribeAddressTemplatesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# address-template-name - IP地址模板名称。
# address-template-id - IP地址模板实例ID，例如：ipm-mdunqeb6。
# address-ip - IP地址。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAddressTemplates返回参数结构体
class DescribeAddressTemplatesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param AddressTemplateSet: IP地址模板。
# @type AddressTemplateSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AddressTemplateSet, :RequestId
def initialize(totalcount=nil, addresstemplateset=nil, requestid=nil)
@TotalCount = totalcount
@AddressTemplateSet = addresstemplateset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AddressTemplateSet'].nil?
@AddressTemplateSet = []
params['AddressTemplateSet'].each do |i|
addresstemplate_tmp = AddressTemplate.new
addresstemplate_tmp.deserialize(i)
@AddressTemplateSet << addresstemplate_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAddresses请求参数结构体
class DescribeAddressesRequest < TencentCloud::Common::AbstractModel
# @param AddressIds: 标识 EIP 的唯一 ID 列表。EIP 唯一 ID 形如：`eip-11112222`。参数不支持同时指定`AddressIds`和`Filters.address-id`。
# @type AddressIds: Array
# @param Filters: 每次请求的`Filters`的上限为10，`Filter.Values`的上限为100。详细的过滤条件如下：
# address-id - String - 是否必填：否 - （过滤条件）按照 EIP 的唯一 ID 过滤。EIP 唯一 ID 形如：eip-11112222。
# address-name - String - 是否必填：否 - （过滤条件）按照 EIP 名称过滤。不支持模糊过滤。
# address-ip - String - 是否必填：否 - （过滤条件）按照 EIP 的 IP 地址过滤。
# address-status - String - 是否必填：否 - （过滤条件）按照 EIP 的状态过滤。状态包含：'CREATING'，'BINDING'，'BIND'，'UNBINDING'，'UNBIND'，'OFFLINING'，'BIND_ENI'。
# instance-id - String - 是否必填：否 - （过滤条件）按照 EIP 绑定的实例 ID 过滤。实例 ID 形如：ins-11112222。
# private-ip-address - String - 是否必填：否 - （过滤条件）按照 EIP 绑定的内网 IP 过滤。
# network-interface-id - String - 是否必填：否 - （过滤条件）按照 EIP 绑定的弹性网卡 ID 过滤。弹性网卡 ID 形如：eni-11112222。
# is-arrears - String - 是否必填：否 - （过滤条件）按照 EIP 是否欠费进行过滤。（TRUE：EIP 处于欠费状态|FALSE：EIP 费用状态正常）
# address-type - String - 是否必填：否 - （过滤条件）按照 IP类型 进行过滤。可选值：'WanIP', 'EIP'，'AnycastEIP'，'HighQualityEIP'。默认值是'EIP'。
# address-isp - String - 是否必填：否 - （过滤条件）按照 运营商类型 进行过滤。可选值：'BGP'，'CMCC'，'CUCC', 'CTCC'
# dedicated-cluster-id - String - 是否必填：否 - （过滤条件）按照 CDC 的唯一 ID 过滤。CDC 唯一 ID 形如：cluster-11112222。
# tag-key - String - 是否必填：否 - （过滤条件）按照标签键进行过滤。
# tag-value - String - 是否必填：否 - （过滤条件）按照标签值进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。tag-key使用具体的标签键进行替换。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Limit: Integer
attr_accessor :AddressIds, :Filters, :Offset, :Limit
def initialize(addressids=nil, filters=nil, offset=nil, limit=nil)
@AddressIds = addressids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@AddressIds = params['AddressIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAddresses返回参数结构体
class DescribeAddressesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的 EIP 数量。
# @type TotalCount: Integer
# @param AddressSet: EIP 详细信息列表。
# @type AddressSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AddressSet, :RequestId
def initialize(totalcount=nil, addressset=nil, requestid=nil)
@TotalCount = totalcount
@AddressSet = addressset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AddressSet'].nil?
@AddressSet = []
params['AddressSet'].each do |i|
address_tmp = Address.new
address_tmp.deserialize(i)
@AddressSet << address_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAssistantCidr请求参数结构体
class DescribeAssistantCidrRequest < TencentCloud::Common::AbstractModel
# @param VpcIds: `VPC`实例`ID`数组。形如：[`vpc-6v2ht8q5`]
# @type VpcIds: Array
# @param Filters: 过滤条件，参数不支持同时指定VpcIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :VpcIds, :Filters, :Offset, :Limit
def initialize(vpcids=nil, filters=nil, offset=nil, limit=nil)
@VpcIds = vpcids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpcIds = params['VpcIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAssistantCidr返回参数结构体
class DescribeAssistantCidrResponse < TencentCloud::Common::AbstractModel
# @param AssistantCidrSet: 符合条件的辅助CIDR数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssistantCidrSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AssistantCidrSet, :TotalCount, :RequestId
def initialize(assistantcidrset=nil, totalcount=nil, requestid=nil)
@AssistantCidrSet = assistantcidrset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['AssistantCidrSet'].nil?
@AssistantCidrSet = []
params['AssistantCidrSet'].each do |i|
assistantcidr_tmp = AssistantCidr.new
assistantcidr_tmp.deserialize(i)
@AssistantCidrSet << assistantcidr_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeBandwidthPackageBillUsage请求参数结构体
class DescribeBandwidthPackageBillUsageRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 后付费共享带宽包的唯一ID
# @type BandwidthPackageId: String
attr_accessor :BandwidthPackageId
def initialize(bandwidthpackageid=nil)
@BandwidthPackageId = bandwidthpackageid
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
end
end
# DescribeBandwidthPackageBillUsage返回参数结构体
class DescribeBandwidthPackageBillUsageResponse < TencentCloud::Common::AbstractModel
# @param BandwidthPackageBillBandwidthSet: 当前计费用量
# @type BandwidthPackageBillBandwidthSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BandwidthPackageBillBandwidthSet, :RequestId
def initialize(bandwidthpackagebillbandwidthset=nil, requestid=nil)
@BandwidthPackageBillBandwidthSet = bandwidthpackagebillbandwidthset
@RequestId = requestid
end
def deserialize(params)
unless params['BandwidthPackageBillBandwidthSet'].nil?
@BandwidthPackageBillBandwidthSet = []
params['BandwidthPackageBillBandwidthSet'].each do |i|
bandwidthpackagebillbandwidth_tmp = BandwidthPackageBillBandwidth.new
bandwidthpackagebillbandwidth_tmp.deserialize(i)
@BandwidthPackageBillBandwidthSet << bandwidthpackagebillbandwidth_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBandwidthPackageQuota请求参数结构体
class DescribeBandwidthPackageQuotaRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeBandwidthPackageQuota返回参数结构体
class DescribeBandwidthPackageQuotaResponse < TencentCloud::Common::AbstractModel
# @param QuotaSet: 带宽包配额详细信息
# @type QuotaSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :QuotaSet, :RequestId
def initialize(quotaset=nil, requestid=nil)
@QuotaSet = quotaset
@RequestId = requestid
end
def deserialize(params)
unless params['QuotaSet'].nil?
@QuotaSet = []
params['QuotaSet'].each do |i|
quota_tmp = Quota.new
quota_tmp.deserialize(i)
@QuotaSet << quota_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBandwidthPackageResources请求参数结构体
class DescribeBandwidthPackageResourcesRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 标识 共享带宽包 的唯一 ID 列表。共享带宽包 唯一 ID 形如：`bwp-11112222`。
# @type BandwidthPackageId: String
# @param Filters: 每次请求的`Filters`的上限为10，`Filter.Values`的上限为5。参数不支持同时指定`AddressIds`和`Filters`。详细的过滤条件如下：
# resource-id - String - 是否必填：否 - （过滤条件）按照 共享带宽包内资源 的唯一 ID 过滤。共享带宽包内资源 唯一 ID 形如：eip-11112222。
# resource-type - String - 是否必填：否 - （过滤条件）按照 共享带宽包内资源 类型过滤，目前仅支持 弹性IP 和 负载均衡 两种类型，可选值为 Address 和 LoadBalance。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Limit: Integer
attr_accessor :BandwidthPackageId, :Filters, :Offset, :Limit
def initialize(bandwidthpackageid=nil, filters=nil, offset=nil, limit=nil)
@BandwidthPackageId = bandwidthpackageid
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeBandwidthPackageResources返回参数结构体
class DescribeBandwidthPackageResourcesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的 共享带宽包内资源 数量。
# @type TotalCount: Integer
# @param ResourceSet: 共享带宽包内资源 详细信息列表。
# @type ResourceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ResourceSet, :RequestId
def initialize(totalcount=nil, resourceset=nil, requestid=nil)
@TotalCount = totalcount
@ResourceSet = resourceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ResourceSet'].nil?
@ResourceSet = []
params['ResourceSet'].each do |i|
resource_tmp = Resource.new
resource_tmp.deserialize(i)
@ResourceSet << resource_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBandwidthPackages请求参数结构体
class DescribeBandwidthPackagesRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageIds: 带宽包唯一ID列表
# @type BandwidthPackageIds: Array
# @param Filters: 每次请求的`Filters`的上限为10。参数不支持同时指定`BandwidthPackageIds`和`Filters`。详细的过滤条件如下：
# bandwidth-package_id - String - 是否必填：否 - （过滤条件）按照带宽包的唯一标识ID过滤。
# bandwidth-package-name - String - 是否必填：否 - （过滤条件）按照 带宽包名称过滤。不支持模糊过滤。
# network-type - String - 是否必填：否 - （过滤条件）按照带宽包的类型过滤。类型包括'HIGH_QUALITY_BGP','BGP','SINGLEISP'和'ANYCAST'。
# charge-type - String - 是否必填：否 - （过滤条件）按照带宽包的计费类型过滤。计费类型包括'TOP5_POSTPAID_BY_MONTH'和'PERCENT95_POSTPAID_BY_MONTH'。
# resource.resource-type - String - 是否必填：否 - （过滤条件）按照带宽包资源类型过滤。资源类型包括'Address'和'LoadBalance'
# resource.resource-id - String - 是否必填：否 - （过滤条件）按照带宽包资源Id过滤。资源Id形如'eip-xxxx','lb-xxxx'
# resource.address-ip - String - 是否必填：否 - （过滤条件）按照带宽包资源Ip过滤。
# tag-key - String - 是否必填：否 - （过滤条件）按照标签键进行过滤。
# tag-value - String - 是否必填：否 - （过滤条件）按照标签值进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。tag-key使用具体的标签键进行替换。
# @type Filters: Array
# @param Offset: 查询带宽包偏移量
# @type Offset: Integer
# @param Limit: 查询带宽包数量限制
# @type Limit: Integer
attr_accessor :BandwidthPackageIds, :Filters, :Offset, :Limit
def initialize(bandwidthpackageids=nil, filters=nil, offset=nil, limit=nil)
@BandwidthPackageIds = bandwidthpackageids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@BandwidthPackageIds = params['BandwidthPackageIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeBandwidthPackages返回参数结构体
class DescribeBandwidthPackagesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的带宽包数量
# @type TotalCount: Integer
# @param BandwidthPackageSet: 描述带宽包详细信息
# @type BandwidthPackageSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :BandwidthPackageSet, :RequestId
def initialize(totalcount=nil, bandwidthpackageset=nil, requestid=nil)
@TotalCount = totalcount
@BandwidthPackageSet = bandwidthpackageset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['BandwidthPackageSet'].nil?
@BandwidthPackageSet = []
params['BandwidthPackageSet'].each do |i|
bandwidthpackage_tmp = BandwidthPackage.new
bandwidthpackage_tmp.deserialize(i)
@BandwidthPackageSet << bandwidthpackage_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCcnAttachedInstances请求参数结构体
class DescribeCcnAttachedInstancesRequest < TencentCloud::Common::AbstractModel
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
# @param Filters: 过滤条件：
# ccn-id - String -（过滤条件）CCN实例ID。
# instance-type - String -（过滤条件）关联实例类型。
# instance-region - String -（过滤条件）关联实例所属地域。
# instance-id - String -（过滤条件）关联实例实例ID。
# @type Filters: Array
# @param CcnId: 云联网实例ID
# @type CcnId: String
# @param OrderField: 排序字段。支持：`CcnId` `InstanceType` `InstanceId` `InstanceName` `InstanceRegion` `AttachedTime` `State`。
# @type OrderField: String
# @param OrderDirection: 排序方法。顺序：`ASC`，倒序：`DESC`。
# @type OrderDirection: String
attr_accessor :Offset, :Limit, :Filters, :CcnId, :OrderField, :OrderDirection
def initialize(offset=nil, limit=nil, filters=nil, ccnid=nil, orderfield=nil, orderdirection=nil)
@Offset = offset
@Limit = limit
@Filters = filters
@CcnId = ccnid
@OrderField = orderfield
@OrderDirection = orderdirection
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@CcnId = params['CcnId']
@OrderField = params['OrderField']
@OrderDirection = params['OrderDirection']
end
end
# DescribeCcnAttachedInstances返回参数结构体
class DescribeCcnAttachedInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param InstanceSet: 关联实例列表。
# @type InstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceSet, :RequestId
def initialize(totalcount=nil, instanceset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceSet = instanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
ccnattachedinstance_tmp = CcnAttachedInstance.new
ccnattachedinstance_tmp.deserialize(i)
@InstanceSet << ccnattachedinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCcnRegionBandwidthLimits请求参数结构体
class DescribeCcnRegionBandwidthLimitsRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
attr_accessor :CcnId
def initialize(ccnid=nil)
@CcnId = ccnid
end
def deserialize(params)
@CcnId = params['CcnId']
end
end
# DescribeCcnRegionBandwidthLimits返回参数结构体
class DescribeCcnRegionBandwidthLimitsResponse < TencentCloud::Common::AbstractModel
# @param CcnRegionBandwidthLimitSet: 云联网（CCN）各地域出带宽上限
# @type CcnRegionBandwidthLimitSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CcnRegionBandwidthLimitSet, :RequestId
def initialize(ccnregionbandwidthlimitset=nil, requestid=nil)
@CcnRegionBandwidthLimitSet = ccnregionbandwidthlimitset
@RequestId = requestid
end
def deserialize(params)
unless params['CcnRegionBandwidthLimitSet'].nil?
@CcnRegionBandwidthLimitSet = []
params['CcnRegionBandwidthLimitSet'].each do |i|
ccnregionbandwidthlimit_tmp = CcnRegionBandwidthLimit.new
ccnregionbandwidthlimit_tmp.deserialize(i)
@CcnRegionBandwidthLimitSet << ccnregionbandwidthlimit_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCcnRoutes请求参数结构体
class DescribeCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID，形如：ccn-gree226l。
# @type CcnId: String
# @param RouteIds: CCN路由策略唯一ID。形如：ccnr-f49l6u0z。
# @type RouteIds: Array
# @param Filters: 过滤条件，参数不支持同时指定RouteIds和Filters。
# route-id - String -（过滤条件）路由策略ID。
# cidr-block - String -（过滤条件）目的端。
# instance-type - String -（过滤条件）下一跳类型。
# instance-region - String -（过滤条件）下一跳所属地域。
# instance-id - String -（过滤条件）下一跳实例ID。
# route-table-id - String -（过滤条件）路由表ID列表，形如ccntr-1234edfr，可以根据路由表ID 过滤。
# @type Filters: Array
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
attr_accessor :CcnId, :RouteIds, :Filters, :Offset, :Limit
def initialize(ccnid=nil, routeids=nil, filters=nil, offset=nil, limit=nil)
@CcnId = ccnid
@RouteIds = routeids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@CcnId = params['CcnId']
@RouteIds = params['RouteIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeCcnRoutes返回参数结构体
class DescribeCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param RouteSet: CCN路由策略对象。
# @type RouteSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteSet, :RequestId
def initialize(totalcount=nil, routeset=nil, requestid=nil)
@TotalCount = totalcount
@RouteSet = routeset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
ccnroute_tmp = CcnRoute.new
ccnroute_tmp.deserialize(i)
@RouteSet << ccnroute_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCcns请求参数结构体
class DescribeCcnsRequest < TencentCloud::Common::AbstractModel
# @param CcnIds: CCN实例ID。形如：ccn-f49l6u0z。每次请求的实例的上限为100。参数不支持同时指定CcnIds和Filters。
# @type CcnIds: Array
# @param Filters: 过滤条件，参数不支持同时指定CcnIds和Filters。
# ccn-id - String - （过滤条件）CCN唯一ID，形如：vpc-f49l6u0z。
# ccn-name - String - （过滤条件）CCN名称。
# ccn-description - String - （过滤条件）CCN描述。
# state - String - （过滤条件）实例状态， 'ISOLATED': 隔离中（欠费停服），'AVAILABLE'：运行中。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。使用请参考示例：查询绑定了标签的CCN列表。
# @type Filters: Array
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
# @param OrderField: 排序字段。支持：`CcnId` `CcnName` `CreateTime` `State` `QosLevel`
# @type OrderField: String
# @param OrderDirection: 排序方法。顺序：`ASC`，倒序：`DESC`。
# @type OrderDirection: String
attr_accessor :CcnIds, :Filters, :Offset, :Limit, :OrderField, :OrderDirection
def initialize(ccnids=nil, filters=nil, offset=nil, limit=nil, orderfield=nil, orderdirection=nil)
@CcnIds = ccnids
@Filters = filters
@Offset = offset
@Limit = limit
@OrderField = orderfield
@OrderDirection = orderdirection
end
def deserialize(params)
@CcnIds = params['CcnIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
@OrderField = params['OrderField']
@OrderDirection = params['OrderDirection']
end
end
# DescribeCcns返回参数结构体
class DescribeCcnsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param CcnSet: CCN对象。
# @type CcnSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :CcnSet, :RequestId
def initialize(totalcount=nil, ccnset=nil, requestid=nil)
@TotalCount = totalcount
@CcnSet = ccnset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['CcnSet'].nil?
@CcnSet = []
params['CcnSet'].each do |i|
ccn_tmp = CCN.new
ccn_tmp.deserialize(i)
@CcnSet << ccn_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClassicLinkInstances请求参数结构体
class DescribeClassicLinkInstancesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# vpc-id - String - （过滤条件）VPC实例ID。
# vm-ip - String - （过滤条件）基础网络云服务器IP。
# @type Filters: Array
# @param Offset: 偏移量
# @type Offset: String
# @param Limit: 返回数量
# @type Limit: String
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filterobject_tmp = FilterObject.new
filterobject_tmp.deserialize(i)
@Filters << filterobject_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeClassicLinkInstances返回参数结构体
class DescribeClassicLinkInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param ClassicLinkInstanceSet: 私有网络和基础网络互通设备。
# @type ClassicLinkInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ClassicLinkInstanceSet, :RequestId
def initialize(totalcount=nil, classiclinkinstanceset=nil, requestid=nil)
@TotalCount = totalcount
@ClassicLinkInstanceSet = classiclinkinstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ClassicLinkInstanceSet'].nil?
@ClassicLinkInstanceSet = []
params['ClassicLinkInstanceSet'].each do |i|
classiclinkinstance_tmp = ClassicLinkInstance.new
classiclinkinstance_tmp.deserialize(i)
@ClassicLinkInstanceSet << classiclinkinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCrossBorderCompliance请求参数结构体
class DescribeCrossBorderComplianceRequest < TencentCloud::Common::AbstractModel
# @param ServiceProvider: （精确匹配）服务商，可选值：`UNICOM`。
# @type ServiceProvider: String
# @param ComplianceId: （精确匹配）合规化审批单`ID`。
# @type ComplianceId: Integer
# @param Company: （模糊查询）公司名称。
# @type Company: String
# @param UniformSocialCreditCode: （精确匹配）统一社会信用代码。
# @type UniformSocialCreditCode: String
# @param LegalPerson: （模糊查询）法定代表人。
# @type LegalPerson: String
# @param IssuingAuthority: （模糊查询）发证机关。
# @type IssuingAuthority: String
# @param BusinessAddress: （模糊查询）营业执照住所。
# @type BusinessAddress: String
# @param PostCode: （精确匹配）邮编。
# @type PostCode: Integer
# @param Manager: （模糊查询）经办人。
# @type Manager: String
# @param ManagerId: （精确查询）经办人身份证号。
# @type ManagerId: String
# @param ManagerAddress: （模糊查询）经办人身份证地址。
# @type ManagerAddress: String
# @param ManagerTelephone: （精确匹配）经办人联系电话。
# @type ManagerTelephone: String
# @param Email: （精确匹配）电子邮箱。
# @type Email: String
# @param ServiceStartDate: （精确匹配）服务开始日期，如：`2020-07-28`。
# @type ServiceStartDate: String
# @param ServiceEndDate: （精确匹配）服务结束日期，如：`2021-07-28`。
# @type ServiceEndDate: String
# @param State: （精确匹配）状态。待审批：`PENDING`，通过：`APPROVED `，拒绝：`DENY`。
# @type State: String
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
attr_accessor :ServiceProvider, :ComplianceId, :Company, :UniformSocialCreditCode, :LegalPerson, :IssuingAuthority, :BusinessAddress, :PostCode, :Manager, :ManagerId, :ManagerAddress, :ManagerTelephone, :Email, :ServiceStartDate, :ServiceEndDate, :State, :Offset, :Limit
def initialize(serviceprovider=nil, complianceid=nil, company=nil, uniformsocialcreditcode=nil, legalperson=nil, issuingauthority=nil, businessaddress=nil, postcode=nil, manager=nil, managerid=nil, manageraddress=nil, managertelephone=nil, email=nil, servicestartdate=nil, serviceenddate=nil, state=nil, offset=nil, limit=nil)
@ServiceProvider = serviceprovider
@ComplianceId = complianceid
@Company = company
@UniformSocialCreditCode = uniformsocialcreditcode
@LegalPerson = legalperson
@IssuingAuthority = issuingauthority
@BusinessAddress = businessaddress
@PostCode = postcode
@Manager = manager
@ManagerId = managerid
@ManagerAddress = manageraddress
@ManagerTelephone = managertelephone
@Email = email
@ServiceStartDate = servicestartdate
@ServiceEndDate = serviceenddate
@State = state
@Offset = offset
@Limit = limit
end
def deserialize(params)
@ServiceProvider = params['ServiceProvider']
@ComplianceId = params['ComplianceId']
@Company = params['Company']
@UniformSocialCreditCode = params['UniformSocialCreditCode']
@LegalPerson = params['LegalPerson']
@IssuingAuthority = params['IssuingAuthority']
@BusinessAddress = params['BusinessAddress']
@PostCode = params['PostCode']
@Manager = params['Manager']
@ManagerId = params['ManagerId']
@ManagerAddress = params['ManagerAddress']
@ManagerTelephone = params['ManagerTelephone']
@Email = params['Email']
@ServiceStartDate = params['ServiceStartDate']
@ServiceEndDate = params['ServiceEndDate']
@State = params['State']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeCrossBorderCompliance返回参数结构体
class DescribeCrossBorderComplianceResponse < TencentCloud::Common::AbstractModel
# @param CrossBorderComplianceSet: 合规化审批单列表。
# @type CrossBorderComplianceSet: Array
# @param TotalCount: 合规化审批单总数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CrossBorderComplianceSet, :TotalCount, :RequestId
def initialize(crossbordercomplianceset=nil, totalcount=nil, requestid=nil)
@CrossBorderComplianceSet = crossbordercomplianceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['CrossBorderComplianceSet'].nil?
@CrossBorderComplianceSet = []
params['CrossBorderComplianceSet'].each do |i|
crossbordercompliance_tmp = CrossBorderCompliance.new
crossbordercompliance_tmp.deserialize(i)
@CrossBorderComplianceSet << crossbordercompliance_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeCustomerGatewayVendors请求参数结构体
class DescribeCustomerGatewayVendorsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeCustomerGatewayVendors返回参数结构体
class DescribeCustomerGatewayVendorsResponse < TencentCloud::Common::AbstractModel
# @param CustomerGatewayVendorSet: 对端网关厂商信息对象。
# @type CustomerGatewayVendorSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CustomerGatewayVendorSet, :RequestId
def initialize(customergatewayvendorset=nil, requestid=nil)
@CustomerGatewayVendorSet = customergatewayvendorset
@RequestId = requestid
end
def deserialize(params)
unless params['CustomerGatewayVendorSet'].nil?
@CustomerGatewayVendorSet = []
params['CustomerGatewayVendorSet'].each do |i|
customergatewayvendor_tmp = CustomerGatewayVendor.new
customergatewayvendor_tmp.deserialize(i)
@CustomerGatewayVendorSet << customergatewayvendor_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCustomerGateways请求参数结构体
class DescribeCustomerGatewaysRequest < TencentCloud::Common::AbstractModel
# @param CustomerGatewayIds: 对端网关ID，例如：cgw-2wqq41m9。每次请求的实例的上限为100。参数不支持同时指定CustomerGatewayIds和Filters。
# @type CustomerGatewayIds: Array
# @param Filters: 过滤条件，详见下表：实例过滤条件表。每次请求的Filters的上限为10，Filter.Values的上限为5。参数不支持同时指定CustomerGatewayIds和Filters。
# customer-gateway-id - String - （过滤条件）用户网关唯一ID形如：`cgw-mgp33pll`。
# customer-gateway-name - String - （过滤条件）用户网关名称形如：`test-cgw`。
# ip-address - String - （过滤条件）公网地址形如：`58.211.1.12`。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于Offset的更进一步介绍请参考 API 简介中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :CustomerGatewayIds, :Filters, :Offset, :Limit
def initialize(customergatewayids=nil, filters=nil, offset=nil, limit=nil)
@CustomerGatewayIds = customergatewayids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@CustomerGatewayIds = params['CustomerGatewayIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeCustomerGateways返回参数结构体
class DescribeCustomerGatewaysResponse < TencentCloud::Common::AbstractModel
# @param CustomerGatewaySet: 对端网关对象列表
# @type CustomerGatewaySet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CustomerGatewaySet, :TotalCount, :RequestId
def initialize(customergatewayset=nil, totalcount=nil, requestid=nil)
@CustomerGatewaySet = customergatewayset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['CustomerGatewaySet'].nil?
@CustomerGatewaySet = []
params['CustomerGatewaySet'].each do |i|
customergateway_tmp = CustomerGateway.new
customergateway_tmp.deserialize(i)
@CustomerGatewaySet << customergateway_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDhcpIps请求参数结构体
class DescribeDhcpIpsRequest < TencentCloud::Common::AbstractModel
# @param DhcpIpIds: DhcpIp实例ID。形如：dhcpip-pxir56ns。每次请求的实例的上限为100。参数不支持同时指定DhcpIpIds和Filters。
# @type DhcpIpIds: Array
# @param Filters: 过滤条件，参数不支持同时指定DhcpIpIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# subnet-id - String - （过滤条件）所属子网实例ID，形如：subnet-f49l6u0z。
# dhcpip-id - String - （过滤条件）DhcpIp实例ID，形如：dhcpip-pxir56ns。
# dhcpip-name - String - （过滤条件）DhcpIp实例名称。
# address-ip - String - （过滤条件）DhcpIp实例的IP，根据IP精确查找。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :DhcpIpIds, :Filters, :Offset, :Limit
def initialize(dhcpipids=nil, filters=nil, offset=nil, limit=nil)
@DhcpIpIds = dhcpipids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DhcpIpIds = params['DhcpIpIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDhcpIps返回参数结构体
class DescribeDhcpIpsResponse < TencentCloud::Common::AbstractModel
# @param DhcpIpSet: 实例详细信息列表。
# @type DhcpIpSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DhcpIpSet, :TotalCount, :RequestId
def initialize(dhcpipset=nil, totalcount=nil, requestid=nil)
@DhcpIpSet = dhcpipset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DhcpIpSet'].nil?
@DhcpIpSet = []
params['DhcpIpSet'].each do |i|
dhcpip_tmp = DhcpIp.new
dhcpip_tmp.deserialize(i)
@DhcpIpSet << dhcpip_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDirectConnectGatewayCcnRoutes请求参数结构体
class DescribeDirectConnectGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关ID，形如：`dcg-prpqlmg1`。
# @type DirectConnectGatewayId: String
# @param CcnRouteType: 云联网路由学习类型，可选值：
# `BGP` - 自动学习。
# `STATIC` - 静态，即用户配置，默认值。
# @type CcnRouteType: String
# @param Offset: 偏移量。
# @type Offset: Integer
# @param Limit: 返回数量。
# @type Limit: Integer
attr_accessor :DirectConnectGatewayId, :CcnRouteType, :Offset, :Limit
def initialize(directconnectgatewayid=nil, ccnroutetype=nil, offset=nil, limit=nil)
@DirectConnectGatewayId = directconnectgatewayid
@CcnRouteType = ccnroutetype
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@CcnRouteType = params['CcnRouteType']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDirectConnectGatewayCcnRoutes返回参数结构体
class DescribeDirectConnectGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param RouteSet: 云联网路由（IDC网段）列表。
# @type RouteSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteSet, :RequestId
def initialize(totalcount=nil, routeset=nil, requestid=nil)
@TotalCount = totalcount
@RouteSet = routeset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
directconnectgatewayccnroute_tmp = DirectConnectGatewayCcnRoute.new
directconnectgatewayccnroute_tmp.deserialize(i)
@RouteSet << directconnectgatewayccnroute_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDirectConnectGateways请求参数结构体
class DescribeDirectConnectGatewaysRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayIds: 专线网关唯一`ID`，形如：`dcg-9o233uri`。
# @type DirectConnectGatewayIds: Array
# @param Filters: 过滤条件，参数不支持同时指定`DirectConnectGatewayIds`和`Filters`。
# direct-connect-gateway-id - String - 专线网关唯一`ID`，形如：`dcg-9o233uri`。
# direct-connect-gateway-name - String - 专线网关名称，默认模糊查询。
# direct-connect-gateway-ip - String - 专线网关`IP`。
# gateway-type - String - 网关类型，可选值：`NORMAL`（普通型）、`NAT`（NAT型）。
# network-type- String - 网络类型，可选值：`VPC`（私有网络类型）、`CCN`（云联网类型）。
# ccn-id - String - 专线网关所在云联网`ID`。
# vpc-id - String - 专线网关所在私有网络`ID`。
# @type Filters: Array
# @param Offset: 偏移量。
# @type Offset: Integer
# @param Limit: 返回数量。
# @type Limit: Integer
attr_accessor :DirectConnectGatewayIds, :Filters, :Offset, :Limit
def initialize(directconnectgatewayids=nil, filters=nil, offset=nil, limit=nil)
@DirectConnectGatewayIds = directconnectgatewayids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DirectConnectGatewayIds = params['DirectConnectGatewayIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDirectConnectGateways返回参数结构体
class DescribeDirectConnectGatewaysResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param DirectConnectGatewaySet: 专线网关对象数组。
# @type DirectConnectGatewaySet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :DirectConnectGatewaySet, :RequestId
def initialize(totalcount=nil, directconnectgatewayset=nil, requestid=nil)
@TotalCount = totalcount
@DirectConnectGatewaySet = directconnectgatewayset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['DirectConnectGatewaySet'].nil?
@DirectConnectGatewaySet = []
params['DirectConnectGatewaySet'].each do |i|
directconnectgateway_tmp = DirectConnectGateway.new
directconnectgateway_tmp.deserialize(i)
@DirectConnectGatewaySet << directconnectgateway_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeFlowLog请求参数结构体
class DescribeFlowLogRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID
# @type VpcId: String
# @param FlowLogId: 流日志唯一ID
# @type FlowLogId: String
attr_accessor :VpcId, :FlowLogId
def initialize(vpcid=nil, flowlogid=nil)
@VpcId = vpcid
@FlowLogId = flowlogid
end
def deserialize(params)
@VpcId = params['VpcId']
@FlowLogId = params['FlowLogId']
end
end
# DescribeFlowLog返回参数结构体
class DescribeFlowLogResponse < TencentCloud::Common::AbstractModel
# @param FlowLog: 流日志信息
# @type FlowLog: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowLog, :RequestId
def initialize(flowlog=nil, requestid=nil)
@FlowLog = flowlog
@RequestId = requestid
end
def deserialize(params)
unless params['FlowLog'].nil?
@FlowLog = []
params['FlowLog'].each do |i|
flowlog_tmp = FlowLog.new
flowlog_tmp.deserialize(i)
@FlowLog << flowlog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeFlowLogs请求参数结构体
class DescribeFlowLogsRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID
# @type VpcId: String
# @param FlowLogId: 流日志唯一ID
# @type FlowLogId: String
# @param FlowLogName: 流日志实例名字
# @type FlowLogName: String
# @param ResourceType: 流日志所属资源类型，VPC|SUBNET|NETWORKINTERFACE
# @type ResourceType: String
# @param ResourceId: 资源唯一ID
# @type ResourceId: String
# @param TrafficType: 流日志采集类型，ACCEPT|REJECT|ALL
# @type TrafficType: String
# @param CloudLogId: 流日志存储ID
# @type CloudLogId: String
# @param CloudLogState: 流日志存储ID状态
# @type CloudLogState: String
# @param OrderField: 按某个字段排序,支持字段：flowLogName,createTime，默认按createTime
# @type OrderField: String
# @param OrderDirection: 升序（asc）还是降序（desc）,默认：desc
# @type OrderDirection: String
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 每页行数，默认为10
# @type Limit: Integer
# @param Filters: 过滤条件，参数不支持同时指定FlowLogIds和Filters。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。
# @type Filters: :class:`Tencentcloud::Vpc.v20170312.models.Filter`
attr_accessor :VpcId, :FlowLogId, :FlowLogName, :ResourceType, :ResourceId, :TrafficType, :CloudLogId, :CloudLogState, :OrderField, :OrderDirection, :Offset, :Limit, :Filters
def initialize(vpcid=nil, flowlogid=nil, flowlogname=nil, resourcetype=nil, resourceid=nil, traffictype=nil, cloudlogid=nil, cloudlogstate=nil, orderfield=nil, orderdirection=nil, offset=nil, limit=nil, filters=nil)
@VpcId = vpcid
@FlowLogId = flowlogid
@FlowLogName = flowlogname
@ResourceType = resourcetype
@ResourceId = resourceid
@TrafficType = traffictype
@CloudLogId = cloudlogid
@CloudLogState = cloudlogstate
@OrderField = orderfield
@OrderDirection = orderdirection
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@VpcId = params['VpcId']
@FlowLogId = params['FlowLogId']
@FlowLogName = params['FlowLogName']
@ResourceType = params['ResourceType']
@ResourceId = params['ResourceId']
@TrafficType = params['TrafficType']
@CloudLogId = params['CloudLogId']
@CloudLogState = params['CloudLogState']
@OrderField = params['OrderField']
@OrderDirection = params['OrderDirection']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = Filter.new
@Filters.deserialize(params['Filters'])
end
end
end
# DescribeFlowLogs返回参数结构体
class DescribeFlowLogsResponse < TencentCloud::Common::AbstractModel
# @param FlowLog: 流日志实例集合
# @type FlowLog: Array
# @param TotalNum: 流日志总数目
# @type TotalNum: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowLog, :TotalNum, :RequestId
def initialize(flowlog=nil, totalnum=nil, requestid=nil)
@FlowLog = flowlog
@TotalNum = totalnum
@RequestId = requestid
end
def deserialize(params)
unless params['FlowLog'].nil?
@FlowLog = []
params['FlowLog'].each do |i|
flowlog_tmp = FlowLog.new
flowlog_tmp.deserialize(i)
@FlowLog << flowlog_tmp
end
end
@TotalNum = params['TotalNum']
@RequestId = params['RequestId']
end
end
# DescribeGatewayFlowMonitorDetail请求参数结构体
class DescribeGatewayFlowMonitorDetailRequest < TencentCloud::Common::AbstractModel
# @param TimePoint: 时间点。表示要查询这分钟内的明细。如：`2019-02-28 18:15:20`，将查询 `18:15` 这一分钟内的明细。
# @type TimePoint: String
# @param VpnId: VPN网关实例ID，形如：`vpn-ltjahce6`。
# @type VpnId: String
# @param DirectConnectGatewayId: 专线网关实例ID，形如：`dcg-ltjahce6`。
# @type DirectConnectGatewayId: String
# @param PeeringConnectionId: 对等连接实例ID，形如：`pcx-ltjahce6`。
# @type PeeringConnectionId: String
# @param NatId: NAT网关实例ID，形如：`nat-ltjahce6`。
# @type NatId: String
# @param Offset: 偏移量。
# @type Offset: Integer
# @param Limit: 返回数量。
# @type Limit: Integer
# @param OrderField: 排序字段。支持 `InPkg` `OutPkg` `InTraffic` `OutTraffic`。
# @type OrderField: String
# @param OrderDirection: 排序方法。顺序：`ASC`，倒序：`DESC`。
# @type OrderDirection: String
attr_accessor :TimePoint, :VpnId, :DirectConnectGatewayId, :PeeringConnectionId, :NatId, :Offset, :Limit, :OrderField, :OrderDirection
def initialize(timepoint=nil, vpnid=nil, directconnectgatewayid=nil, peeringconnectionid=nil, natid=nil, offset=nil, limit=nil, orderfield=nil, orderdirection=nil)
@TimePoint = timepoint
@VpnId = vpnid
@DirectConnectGatewayId = directconnectgatewayid
@PeeringConnectionId = peeringconnectionid
@NatId = natid
@Offset = offset
@Limit = limit
@OrderField = orderfield
@OrderDirection = orderdirection
end
def deserialize(params)
@TimePoint = params['TimePoint']
@VpnId = params['VpnId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@PeeringConnectionId = params['PeeringConnectionId']
@NatId = params['NatId']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderField = params['OrderField']
@OrderDirection = params['OrderDirection']
end
end
# DescribeGatewayFlowMonitorDetail返回参数结构体
class DescribeGatewayFlowMonitorDetailResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param GatewayFlowMonitorDetailSet: 网关流量监控明细。
# @type GatewayFlowMonitorDetailSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :GatewayFlowMonitorDetailSet, :RequestId
def initialize(totalcount=nil, gatewayflowmonitordetailset=nil, requestid=nil)
@TotalCount = totalcount
@GatewayFlowMonitorDetailSet = gatewayflowmonitordetailset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['GatewayFlowMonitorDetailSet'].nil?
@GatewayFlowMonitorDetailSet = []
params['GatewayFlowMonitorDetailSet'].each do |i|
gatewayflowmonitordetail_tmp = GatewayFlowMonitorDetail.new
gatewayflowmonitordetail_tmp.deserialize(i)
@GatewayFlowMonitorDetailSet << gatewayflowmonitordetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeGatewayFlowQos请求参数结构体
class DescribeGatewayFlowQosRequest < TencentCloud::Common::AbstractModel
# @param GatewayId: 网关实例ID，目前我们支持的网关实例类型有，
# 专线网关实例ID，形如，`dcg-ltjahce6`；
# Nat网关实例ID，形如，`nat-ltjahce6`；
# VPN网关实例ID，形如，`vpn-ltjahce6`。
# @type GatewayId: String
# @param IpAddresses: 限流的云服务器内网IP。
# @type IpAddresses: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :GatewayId, :IpAddresses, :Offset, :Limit
def initialize(gatewayid=nil, ipaddresses=nil, offset=nil, limit=nil)
@GatewayId = gatewayid
@IpAddresses = ipaddresses
@Offset = offset
@Limit = limit
end
def deserialize(params)
@GatewayId = params['GatewayId']
@IpAddresses = params['IpAddresses']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeGatewayFlowQos返回参数结构体
class DescribeGatewayFlowQosResponse < TencentCloud::Common::AbstractModel
# @param GatewayQosSet: 实例详细信息列表。
# @type GatewayQosSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GatewayQosSet, :TotalCount, :RequestId
def initialize(gatewayqosset=nil, totalcount=nil, requestid=nil)
@GatewayQosSet = gatewayqosset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['GatewayQosSet'].nil?
@GatewayQosSet = []
params['GatewayQosSet'].each do |i|
gatewayqos_tmp = GatewayQos.new
gatewayqos_tmp.deserialize(i)
@GatewayQosSet << gatewayqos_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeHaVips请求参数结构体
class DescribeHaVipsRequest < TencentCloud::Common::AbstractModel
# @param HaVipIds: `HAVIP`唯一`ID`，形如：`havip-9o233uri`。
# @type HaVipIds: Array
# @param Filters: 过滤条件，参数不支持同时指定`HaVipIds`和`Filters`。
# havip-id - String - `HAVIP`唯一`ID`，形如：`havip-9o233uri`。
# havip-name - String - `HAVIP`名称。
# vpc-id - String - `HAVIP`所在私有网络`ID`。
# subnet-id - String - `HAVIP`所在子网`ID`。
# vip - String - `HAVIP`的地址`VIP`。
# address-ip - String - `HAVIP`绑定的弹性公网`IP`。
# @type Filters: Array
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
attr_accessor :HaVipIds, :Filters, :Offset, :Limit
def initialize(havipids=nil, filters=nil, offset=nil, limit=nil)
@HaVipIds = havipids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@HaVipIds = params['HaVipIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeHaVips返回参数结构体
class DescribeHaVipsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param HaVipSet: `HAVIP`对象数组。
# @type HaVipSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :HaVipSet, :RequestId
def initialize(totalcount=nil, havipset=nil, requestid=nil)
@TotalCount = totalcount
@HaVipSet = havipset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['HaVipSet'].nil?
@HaVipSet = []
params['HaVipSet'].each do |i|
havip_tmp = HaVip.new
havip_tmp.deserialize(i)
@HaVipSet << havip_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeIp6Addresses请求参数结构体
class DescribeIp6AddressesRequest < TencentCloud::Common::AbstractModel
# @param Ip6AddressIds: 标识 IPV6 的唯一 ID 列表。IPV6 唯一 ID 形如：`eip-11112222`。参数不支持同时指定`Ip6AddressIds`和`Filters`。
# @type Ip6AddressIds: Array
# @param Filters: 每次请求的`Filters`的上限为10，`Filter.Values`的上限为5。参数不支持同时指定`AddressIds`和`Filters`。详细的过滤条件如下：
# address-ip - String - 是否必填：否 - （过滤条件）按照 EIP 的 IP 地址过滤。
# network-interface-id - String - 是否必填：否 - （过滤条件）按照弹性网卡的唯一ID过滤。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Limit: Integer
attr_accessor :Ip6AddressIds, :Filters, :Offset, :Limit
def initialize(ip6addressids=nil, filters=nil, offset=nil, limit=nil)
@Ip6AddressIds = ip6addressids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@Ip6AddressIds = params['Ip6AddressIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeIp6Addresses返回参数结构体
class DescribeIp6AddressesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的 IPV6 数量。
# @type TotalCount: Integer
# @param AddressSet: IPV6 详细信息列表。
# @type AddressSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AddressSet, :RequestId
def initialize(totalcount=nil, addressset=nil, requestid=nil)
@TotalCount = totalcount
@AddressSet = addressset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AddressSet'].nil?
@AddressSet = []
params['AddressSet'].each do |i|
address_tmp = Address.new
address_tmp.deserialize(i)
@AddressSet << address_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeIp6TranslatorQuota请求参数结构体
class DescribeIp6TranslatorQuotaRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorIds: 待查询IPV6转换实例的唯一ID列表，形如ip6-xxxxxxxx
# @type Ip6TranslatorIds: Array
attr_accessor :Ip6TranslatorIds
def initialize(ip6translatorids=nil)
@Ip6TranslatorIds = ip6translatorids
end
def deserialize(params)
@Ip6TranslatorIds = params['Ip6TranslatorIds']
end
end
# DescribeIp6TranslatorQuota返回参数结构体
class DescribeIp6TranslatorQuotaResponse < TencentCloud::Common::AbstractModel
# @param QuotaSet: 账户在指定地域的IPV6转换实例及规则配额信息
# QUOTAID属性是TOTAL_TRANSLATOR_QUOTA，表示账户在指定地域的IPV6转换实例配额信息；QUOTAID属性是IPV6转换实例唯一ID（形如ip6-xxxxxxxx），表示账户在该转换实例允许创建的转换规则配额
# @type QuotaSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :QuotaSet, :RequestId
def initialize(quotaset=nil, requestid=nil)
@QuotaSet = quotaset
@RequestId = requestid
end
def deserialize(params)
unless params['QuotaSet'].nil?
@QuotaSet = []
params['QuotaSet'].each do |i|
quota_tmp = Quota.new
quota_tmp.deserialize(i)
@QuotaSet << quota_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeIp6Translators请求参数结构体
class DescribeIp6TranslatorsRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorIds: IPV6转换实例唯一ID数组，形如ip6-xxxxxxxx
# @type Ip6TranslatorIds: Array
# @param Filters: 每次请求的`Filters`的上限为10，`Filter.Values`的上限为5。参数不支持同时指定`Ip6TranslatorIds`和`Filters`。详细的过滤条件如下：
# ip6-translator-id - String - 是否必填：否 - （过滤条件）按照IPV6转换实例的唯一ID过滤,形如ip6-xxxxxxx。
# ip6-translator-vip6 - String - 是否必填：否 - （过滤条件）按照IPV6地址过滤。不支持模糊过滤。
# ip6-translator-name - String - 是否必填：否 - （过滤条件）按照IPV6转换实例名称过滤。不支持模糊过滤。
# ip6-translator-status - String - 是否必填：否 - （过滤条件）按照IPV6转换实例的状态过滤。状态取值范围为"CREATING","RUNNING","DELETING","MODIFYING"
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Limit: Integer
attr_accessor :Ip6TranslatorIds, :Filters, :Offset, :Limit
def initialize(ip6translatorids=nil, filters=nil, offset=nil, limit=nil)
@Ip6TranslatorIds = ip6translatorids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@Ip6TranslatorIds = params['Ip6TranslatorIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeIp6Translators返回参数结构体
class DescribeIp6TranslatorsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合过滤条件的IPV6转换实例数量。
# @type TotalCount: Integer
# @param Ip6TranslatorSet: 符合过滤条件的IPV6转换实例详细信息
# @type Ip6TranslatorSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Ip6TranslatorSet, :RequestId
def initialize(totalcount=nil, ip6translatorset=nil, requestid=nil)
@TotalCount = totalcount
@Ip6TranslatorSet = ip6translatorset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Ip6TranslatorSet'].nil?
@Ip6TranslatorSet = []
params['Ip6TranslatorSet'].each do |i|
ip6translator_tmp = Ip6Translator.new
ip6translator_tmp.deserialize(i)
@Ip6TranslatorSet << ip6translator_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeIpGeolocationDatabaseUrl请求参数结构体
class DescribeIpGeolocationDatabaseUrlRequest < TencentCloud::Common::AbstractModel
# @param Type: IP地理位置库协议类型，目前仅支持"ipv4"。
# @type Type: String
attr_accessor :Type
def initialize(type=nil)
@Type = type
end
def deserialize(params)
@Type = params['Type']
end
end
# DescribeIpGeolocationDatabaseUrl返回参数结构体
class DescribeIpGeolocationDatabaseUrlResponse < TencentCloud::Common::AbstractModel
# @param DownLoadUrl: IP地理位置库下载链接地址。
# @type DownLoadUrl: String
# @param ExpiredAt: 链接到期时间。按照`ISO8601`标准表示，并且使用`UTC`时间。
# @type ExpiredAt: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownLoadUrl, :ExpiredAt, :RequestId
def initialize(downloadurl=nil, expiredat=nil, requestid=nil)
@DownLoadUrl = downloadurl
@ExpiredAt = expiredat
@RequestId = requestid
end
def deserialize(params)
@DownLoadUrl = params['DownLoadUrl']
@ExpiredAt = params['ExpiredAt']
@RequestId = params['RequestId']
end
end
# DescribeIpGeolocationInfos请求参数结构体
class DescribeIpGeolocationInfosRequest < TencentCloud::Common::AbstractModel
# @param AddressIps: 需查询的IP地址列表，目前仅支持IPv4地址。查询的IP地址数量上限为100个。
# @type AddressIps: Array
# @param Fields: 需查询的IP地址的字段信息。
# @type Fields: :class:`Tencentcloud::Vpc.v20170312.models.IpField`
attr_accessor :AddressIps, :Fields
def initialize(addressips=nil, fields=nil)
@AddressIps = addressips
@Fields = fields
end
def deserialize(params)
@AddressIps = params['AddressIps']
unless params['Fields'].nil?
@Fields = IpField.new
@Fields.deserialize(params['Fields'])
end
end
end
# DescribeIpGeolocationInfos返回参数结构体
class DescribeIpGeolocationInfosResponse < TencentCloud::Common::AbstractModel
# @param AddressInfo: IP地址信息列表。
# @type AddressInfo: Array
# @param Total: IP地址信息个数。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AddressInfo, :Total, :RequestId
def initialize(addressinfo=nil, total=nil, requestid=nil)
@AddressInfo = addressinfo
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['AddressInfo'].nil?
@AddressInfo = []
params['AddressInfo'].each do |i|
ipgeolocationinfo_tmp = IpGeolocationInfo.new
ipgeolocationinfo_tmp.deserialize(i)
@AddressInfo << ipgeolocationinfo_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeLocalGateway请求参数结构体
class DescribeLocalGatewayRequest < TencentCloud::Common::AbstractModel
# @param Filters: 查询条件：
# vpc-id：按照VPCID过滤，local-gateway-name：按照本地网关名称过滤，名称支持模糊搜索，local-gateway-id：按照本地网关实例ID过滤，cdc-id：按照cdc实例ID过滤查询。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/11646)中的相关小节。
# @type Limit: Integer
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeLocalGateway返回参数结构体
class DescribeLocalGatewayResponse < TencentCloud::Common::AbstractModel
# @param LocalGatewaySet: 本地网关信息集合
# @type LocalGatewaySet: Array
# @param TotalCount: 本地网关总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :LocalGatewaySet, :TotalCount, :RequestId
def initialize(localgatewayset=nil, totalcount=nil, requestid=nil)
@LocalGatewaySet = localgatewayset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['LocalGatewaySet'].nil?
@LocalGatewaySet = []
params['LocalGatewaySet'].each do |i|
localgateway_tmp = LocalGateway.new
localgateway_tmp.deserialize(i)
@LocalGatewaySet << localgateway_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNatGatewayDestinationIpPortTranslationNatRules请求参数结构体
class DescribeNatGatewayDestinationIpPortTranslationNatRulesRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayIds: NAT网关ID。
# @type NatGatewayIds: Array
# @param Filters: 过滤条件:
# 参数不支持同时指定NatGatewayIds和Filters。
# nat-gateway-id，NAT网关的ID，如`nat-0yi4hekt`
# vpc-id，私有网络VPC的ID，如`vpc-0yi4hekt`
# public-ip-address， 弹性IP，如`139.199.232.238`。
# public-port， 公网端口。
# private-ip-address， 内网IP，如`10.0.0.1`。
# private-port， 内网端口。
# description，规则描述。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NatGatewayIds, :Filters, :Offset, :Limit
def initialize(natgatewayids=nil, filters=nil, offset=nil, limit=nil)
@NatGatewayIds = natgatewayids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NatGatewayIds = params['NatGatewayIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNatGatewayDestinationIpPortTranslationNatRules返回参数结构体
class DescribeNatGatewayDestinationIpPortTranslationNatRulesResponse < TencentCloud::Common::AbstractModel
# @param NatGatewayDestinationIpPortTranslationNatRuleSet: NAT网关端口转发规则对象数组。
# @type NatGatewayDestinationIpPortTranslationNatRuleSet: Array
# @param TotalCount: 符合条件的NAT网关端口转发规则对象数目。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NatGatewayDestinationIpPortTranslationNatRuleSet, :TotalCount, :RequestId
def initialize(natgatewaydestinationipporttranslationnatruleset=nil, totalcount=nil, requestid=nil)
@NatGatewayDestinationIpPortTranslationNatRuleSet = natgatewaydestinationipporttranslationnatruleset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NatGatewayDestinationIpPortTranslationNatRuleSet'].nil?
@NatGatewayDestinationIpPortTranslationNatRuleSet = []
params['NatGatewayDestinationIpPortTranslationNatRuleSet'].each do |i|
natgatewaydestinationipporttranslationnatrule_tmp = NatGatewayDestinationIpPortTranslationNatRule.new
natgatewaydestinationipporttranslationnatrule_tmp.deserialize(i)
@NatGatewayDestinationIpPortTranslationNatRuleSet << natgatewaydestinationipporttranslationnatrule_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNatGatewayDirectConnectGatewayRoute请求参数结构体
class DescribeNatGatewayDirectConnectGatewayRouteRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: nat的唯一标识
# @type NatGatewayId: String
# @param VpcId: vpc的唯一标识
# @type VpcId: String
# @param Limit: 0到200之间
# @type Limit: Integer
# @param Offset: 大于0
# @type Offset: Integer
attr_accessor :NatGatewayId, :VpcId, :Limit, :Offset
def initialize(natgatewayid=nil, vpcid=nil, limit=nil, offset=nil)
@NatGatewayId = natgatewayid
@VpcId = vpcid
@Limit = limit
@Offset = offset
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@VpcId = params['VpcId']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeNatGatewayDirectConnectGatewayRoute返回参数结构体
class DescribeNatGatewayDirectConnectGatewayRouteResponse < TencentCloud::Common::AbstractModel
# @param NatDirectConnectGatewayRouteSet: 路由数据
# @type NatDirectConnectGatewayRouteSet: Array
# @param Total: 路由总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NatDirectConnectGatewayRouteSet, :Total, :RequestId
def initialize(natdirectconnectgatewayrouteset=nil, total=nil, requestid=nil)
@NatDirectConnectGatewayRouteSet = natdirectconnectgatewayrouteset
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['NatDirectConnectGatewayRouteSet'].nil?
@NatDirectConnectGatewayRouteSet = []
params['NatDirectConnectGatewayRouteSet'].each do |i|
natdirectconnectgatewayroute_tmp = NatDirectConnectGatewayRoute.new
natdirectconnectgatewayroute_tmp.deserialize(i)
@NatDirectConnectGatewayRouteSet << natdirectconnectgatewayroute_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeNatGatewaySourceIpTranslationNatRules请求参数结构体
class DescribeNatGatewaySourceIpTranslationNatRulesRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关统一 ID，形如：`nat-123xx454`。
# @type NatGatewayId: String
# @param Filters: 过滤条件:
# resource-id，Subnet的ID或者Cvm ID，如`subnet-0yi4hekt`
# public-ip-address，弹性IP，如`139.199.232.238`
# description，规则描述。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NatGatewayId, :Filters, :Offset, :Limit
def initialize(natgatewayid=nil, filters=nil, offset=nil, limit=nil)
@NatGatewayId = natgatewayid
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNatGatewaySourceIpTranslationNatRules返回参数结构体
class DescribeNatGatewaySourceIpTranslationNatRulesResponse < TencentCloud::Common::AbstractModel
# @param SourceIpTranslationNatRuleSet: NAT网关SNAT规则对象数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SourceIpTranslationNatRuleSet: Array
# @param TotalCount: 符合条件的NAT网关端口转发规则对象数目。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SourceIpTranslationNatRuleSet, :TotalCount, :RequestId
def initialize(sourceiptranslationnatruleset=nil, totalcount=nil, requestid=nil)
@SourceIpTranslationNatRuleSet = sourceiptranslationnatruleset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SourceIpTranslationNatRuleSet'].nil?
@SourceIpTranslationNatRuleSet = []
params['SourceIpTranslationNatRuleSet'].each do |i|
sourceiptranslationnatrule_tmp = SourceIpTranslationNatRule.new
sourceiptranslationnatrule_tmp.deserialize(i)
@SourceIpTranslationNatRuleSet << sourceiptranslationnatrule_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNatGateways请求参数结构体
class DescribeNatGatewaysRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayIds: NAT网关统一 ID，形如：`nat-123xx454`。
# @type NatGatewayIds: Array
# @param Filters: 过滤条件，参数不支持同时指定NatGatewayIds和Filters。
# nat-gateway-id - String - （过滤条件）协议端口模板实例ID，形如：`nat-123xx454`。
# vpc-id - String - （过滤条件）私有网络 唯一ID，形如：`vpc-123xx454`。
# nat-gateway-name - String - （过滤条件）协议端口模板实例ID，形如：`test_nat`。
# tag-key - String - （过滤条件）标签键，形如：`test-key`。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NatGatewayIds, :Filters, :Offset, :Limit
def initialize(natgatewayids=nil, filters=nil, offset=nil, limit=nil)
@NatGatewayIds = natgatewayids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NatGatewayIds = params['NatGatewayIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNatGateways返回参数结构体
class DescribeNatGatewaysResponse < TencentCloud::Common::AbstractModel
# @param NatGatewaySet: NAT网关对象数组。
# @type NatGatewaySet: Array
# @param TotalCount: 符合条件的NAT网关对象个数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NatGatewaySet, :TotalCount, :RequestId
def initialize(natgatewayset=nil, totalcount=nil, requestid=nil)
@NatGatewaySet = natgatewayset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NatGatewaySet'].nil?
@NatGatewaySet = []
params['NatGatewaySet'].each do |i|
natgateway_tmp = NatGateway.new
natgateway_tmp.deserialize(i)
@NatGatewaySet << natgateway_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNetDetectStates请求参数结构体
class DescribeNetDetectStatesRequest < TencentCloud::Common::AbstractModel
# @param NetDetectIds: 网络探测实例`ID`数组。形如：[`netd-12345678`]
# @type NetDetectIds: Array
# @param Filters: 过滤条件，参数不支持同时指定NetDetectIds和Filters。
# net-detect-id - String - （过滤条件）网络探测实例ID，形如：netd-12345678
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NetDetectIds, :Filters, :Offset, :Limit
def initialize(netdetectids=nil, filters=nil, offset=nil, limit=nil)
@NetDetectIds = netdetectids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NetDetectIds = params['NetDetectIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNetDetectStates返回参数结构体
class DescribeNetDetectStatesResponse < TencentCloud::Common::AbstractModel
# @param NetDetectStateSet: 符合条件的网络探测验证结果对象数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetDetectStateSet: Array
# @param TotalCount: 符合条件的网络探测验证结果对象数量。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetDetectStateSet, :TotalCount, :RequestId
def initialize(netdetectstateset=nil, totalcount=nil, requestid=nil)
@NetDetectStateSet = netdetectstateset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NetDetectStateSet'].nil?
@NetDetectStateSet = []
params['NetDetectStateSet'].each do |i|
netdetectstate_tmp = NetDetectState.new
netdetectstate_tmp.deserialize(i)
@NetDetectStateSet << netdetectstate_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNetDetects请求参数结构体
class DescribeNetDetectsRequest < TencentCloud::Common::AbstractModel
# @param NetDetectIds: 网络探测实例`ID`数组。形如：[`netd-12345678`]
# @type NetDetectIds: Array
# @param Filters: 过滤条件，参数不支持同时指定NetDetectIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-12345678
# net-detect-id - String - （过滤条件）网络探测实例ID，形如：netd-12345678
# subnet-id - String - （过滤条件）子网实例ID，形如：subnet-12345678
# net-detect-name - String - （过滤条件）网络探测名称
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NetDetectIds, :Filters, :Offset, :Limit
def initialize(netdetectids=nil, filters=nil, offset=nil, limit=nil)
@NetDetectIds = netdetectids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NetDetectIds = params['NetDetectIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNetDetects返回参数结构体
class DescribeNetDetectsResponse < TencentCloud::Common::AbstractModel
# @param NetDetectSet: 符合条件的网络探测对象数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetDetectSet: Array
# @param TotalCount: 符合条件的网络探测对象数量。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetDetectSet, :TotalCount, :RequestId
def initialize(netdetectset=nil, totalcount=nil, requestid=nil)
@NetDetectSet = netdetectset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NetDetectSet'].nil?
@NetDetectSet = []
params['NetDetectSet'].each do |i|
netdetect_tmp = NetDetect.new
netdetect_tmp.deserialize(i)
@NetDetectSet << netdetect_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNetworkAcls请求参数结构体
class DescribeNetworkAclsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件，参数不支持同时指定NetworkAclIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-12345678。
# network-acl-id - String - （过滤条件）网络ACL实例ID，形如：acl-12345678。
# network-acl-name - String - （过滤条件）网络ACL实例名称。
# @type Filters: Array
# @param NetworkAclIds: 网络ACL实例ID数组。形如：[acl-12345678]。每次请求的实例的上限为100。参数不支持同时指定NetworkAclIds和Filters。
# @type NetworkAclIds: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最小值为1，最大值为100。
# @type Limit: Integer
attr_accessor :Filters, :NetworkAclIds, :Offset, :Limit
def initialize(filters=nil, networkaclids=nil, offset=nil, limit=nil)
@Filters = filters
@NetworkAclIds = networkaclids
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@NetworkAclIds = params['NetworkAclIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNetworkAcls返回参数结构体
class DescribeNetworkAclsResponse < TencentCloud::Common::AbstractModel
# @param NetworkAclSet: 实例详细信息列表。
# @type NetworkAclSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetworkAclSet, :TotalCount, :RequestId
def initialize(networkaclset=nil, totalcount=nil, requestid=nil)
@NetworkAclSet = networkaclset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NetworkAclSet'].nil?
@NetworkAclSet = []
params['NetworkAclSet'].each do |i|
networkacl_tmp = NetworkAcl.new
networkacl_tmp.deserialize(i)
@NetworkAclSet << networkacl_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeNetworkInterfaceLimit请求参数结构体
class DescribeNetworkInterfaceLimitRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 要查询的CVM实例ID或弹性网卡ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeNetworkInterfaceLimit返回参数结构体
class DescribeNetworkInterfaceLimitResponse < TencentCloud::Common::AbstractModel
# @param EniQuantity: 标准型弹性网卡配额
# @type EniQuantity: Integer
# @param EniPrivateIpAddressQuantity: 每个标准型弹性网卡可以分配的IP配额
# @type EniPrivateIpAddressQuantity: Integer
# @param ExtendEniQuantity: 扩展型网卡配额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtendEniQuantity: Integer
# @param ExtendEniPrivateIpAddressQuantity: 每个扩展型弹性网卡可以分配的IP配额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtendEniPrivateIpAddressQuantity: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EniQuantity, :EniPrivateIpAddressQuantity, :ExtendEniQuantity, :ExtendEniPrivateIpAddressQuantity, :RequestId
def initialize(eniquantity=nil, eniprivateipaddressquantity=nil, extendeniquantity=nil, extendeniprivateipaddressquantity=nil, requestid=nil)
@EniQuantity = eniquantity
@EniPrivateIpAddressQuantity = eniprivateipaddressquantity
@ExtendEniQuantity = extendeniquantity
@ExtendEniPrivateIpAddressQuantity = extendeniprivateipaddressquantity
@RequestId = requestid
end
def deserialize(params)
@EniQuantity = params['EniQuantity']
@EniPrivateIpAddressQuantity = params['EniPrivateIpAddressQuantity']
@ExtendEniQuantity = params['ExtendEniQuantity']
@ExtendEniPrivateIpAddressQuantity = params['ExtendEniPrivateIpAddressQuantity']
@RequestId = params['RequestId']
end
end
# DescribeNetworkInterfaces请求参数结构体
class DescribeNetworkInterfacesRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceIds: 弹性网卡实例ID查询。形如：eni-pxir56ns。每次请求的实例的上限为100。参数不支持同时指定NetworkInterfaceIds和Filters。
# @type NetworkInterfaceIds: Array
# @param Filters: 过滤条件，参数不支持同时指定NetworkInterfaceIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# subnet-id - String - （过滤条件）所属子网实例ID，形如：subnet-f49l6u0z。
# network-interface-id - String - （过滤条件）弹性网卡实例ID，形如：eni-5k56k7k7。
# attachment.instance-id - String - （过滤条件）绑定的云服务器实例ID，形如：ins-3nqpdn3i。
# groups.security-group-id - String - （过滤条件）绑定的安全组实例ID，例如：sg-f9ekbxeq。
# network-interface-name - String - （过滤条件）网卡实例名称。
# network-interface-description - String - （过滤条件）网卡实例描述。
# address-ip - String - （过滤条件）内网IPv4地址，单IP后缀模糊匹配，多IP精确匹配。可以与`ip-exact-match`配合做单IP的精确匹配查询。
# ip-exact-match - Boolean - （过滤条件）内网IPv4精确匹配查询，存在多值情况，只取第一个。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。使用请参考示例2
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。使用请参考示例3。
# is-primary - Boolean - 是否必填：否 - （过滤条件）按照是否主网卡进行过滤。值为true时，仅过滤主网卡；值为false时，仅过滤辅助网卡；此过滤参数未提供时，同时过滤主网卡和辅助网卡。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :NetworkInterfaceIds, :Filters, :Offset, :Limit
def initialize(networkinterfaceids=nil, filters=nil, offset=nil, limit=nil)
@NetworkInterfaceIds = networkinterfaceids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@NetworkInterfaceIds = params['NetworkInterfaceIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeNetworkInterfaces返回参数结构体
class DescribeNetworkInterfacesResponse < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceSet: 实例详细信息列表。
# @type NetworkInterfaceSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NetworkInterfaceSet, :TotalCount, :RequestId
def initialize(networkinterfaceset=nil, totalcount=nil, requestid=nil)
@NetworkInterfaceSet = networkinterfaceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NetworkInterfaceSet'].nil?
@NetworkInterfaceSet = []
params['NetworkInterfaceSet'].each do |i|
networkinterface_tmp = NetworkInterface.new
networkinterface_tmp.deserialize(i)
@NetworkInterfaceSet << networkinterface_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeProductQuota请求参数结构体
class DescribeProductQuotaRequest < TencentCloud::Common::AbstractModel
# @param Product: 查询的网络产品名称，如vpc、ccn等
# @type Product: String
attr_accessor :Product
def initialize(product=nil)
@Product = product
end
def deserialize(params)
@Product = params['Product']
end
end
# DescribeProductQuota返回参数结构体
class DescribeProductQuotaResponse < TencentCloud::Common::AbstractModel
# @param ProductQuotaSet: ProductQuota对象数组
# @type ProductQuotaSet: Array
# @param TotalCount: 符合条件的产品类型个数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ProductQuotaSet, :TotalCount, :RequestId
def initialize(productquotaset=nil, totalcount=nil, requestid=nil)
@ProductQuotaSet = productquotaset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ProductQuotaSet'].nil?
@ProductQuotaSet = []
params['ProductQuotaSet'].each do |i|
productquota_tmp = ProductQuota.new
productquota_tmp.deserialize(i)
@ProductQuotaSet << productquota_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeRouteConflicts请求参数结构体
class DescribeRouteConflictsRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param DestinationCidrBlocks: 要检查的与之冲突的目的端列表
# @type DestinationCidrBlocks: Array
attr_accessor :RouteTableId, :DestinationCidrBlocks
def initialize(routetableid=nil, destinationcidrblocks=nil)
@RouteTableId = routetableid
@DestinationCidrBlocks = destinationcidrblocks
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@DestinationCidrBlocks = params['DestinationCidrBlocks']
end
end
# DescribeRouteConflicts返回参数结构体
class DescribeRouteConflictsResponse < TencentCloud::Common::AbstractModel
# @param RouteConflictSet: 路由策略冲突列表
# @type RouteConflictSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RouteConflictSet, :RequestId
def initialize(routeconflictset=nil, requestid=nil)
@RouteConflictSet = routeconflictset
@RequestId = requestid
end
def deserialize(params)
unless params['RouteConflictSet'].nil?
@RouteConflictSet = []
params['RouteConflictSet'].each do |i|
routeconflict_tmp = RouteConflict.new
routeconflict_tmp.deserialize(i)
@RouteConflictSet << routeconflict_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRouteTables请求参数结构体
class DescribeRouteTablesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件，参数不支持同时指定RouteTableIds和Filters。
# route-table-id - String - （过滤条件）路由表实例ID。
# route-table-name - String - （过滤条件）路由表名称。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# association.main - String - （过滤条件）是否主路由表。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。使用请参考示例2。
# @type Filters: Array
# @param RouteTableIds: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableIds: Array
# @param Offset: 偏移量。
# @type Offset: String
# @param Limit: 请求对象个数。
# @type Limit: String
attr_accessor :Filters, :RouteTableIds, :Offset, :Limit
def initialize(filters=nil, routetableids=nil, offset=nil, limit=nil)
@Filters = filters
@RouteTableIds = routetableids
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@RouteTableIds = params['RouteTableIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeRouteTables返回参数结构体
class DescribeRouteTablesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RouteTableSet: 路由表对象。
# @type RouteTableSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteTableSet, :RequestId
def initialize(totalcount=nil, routetableset=nil, requestid=nil)
@TotalCount = totalcount
@RouteTableSet = routetableset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteTableSet'].nil?
@RouteTableSet = []
params['RouteTableSet'].each do |i|
routetable_tmp = RouteTable.new
routetable_tmp.deserialize(i)
@RouteTableSet << routetable_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSecurityGroupAssociationStatistics请求参数结构体
class DescribeSecurityGroupAssociationStatisticsRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupIds: 安全实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupIds: Array
attr_accessor :SecurityGroupIds
def initialize(securitygroupids=nil)
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# DescribeSecurityGroupAssociationStatistics返回参数结构体
class DescribeSecurityGroupAssociationStatisticsResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroupAssociationStatisticsSet: 安全组关联实例统计。
# @type SecurityGroupAssociationStatisticsSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroupAssociationStatisticsSet, :RequestId
def initialize(securitygroupassociationstatisticsset=nil, requestid=nil)
@SecurityGroupAssociationStatisticsSet = securitygroupassociationstatisticsset
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroupAssociationStatisticsSet'].nil?
@SecurityGroupAssociationStatisticsSet = []
params['SecurityGroupAssociationStatisticsSet'].each do |i|
securitygroupassociationstatistics_tmp = SecurityGroupAssociationStatistics.new
securitygroupassociationstatistics_tmp.deserialize(i)
@SecurityGroupAssociationStatisticsSet << securitygroupassociationstatistics_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSecurityGroupLimits请求参数结构体
class DescribeSecurityGroupLimitsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeSecurityGroupLimits返回参数结构体
class DescribeSecurityGroupLimitsResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroupLimitSet: 用户安全组配额限制。
# @type SecurityGroupLimitSet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupLimitSet`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroupLimitSet, :RequestId
def initialize(securitygrouplimitset=nil, requestid=nil)
@SecurityGroupLimitSet = securitygrouplimitset
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroupLimitSet'].nil?
@SecurityGroupLimitSet = SecurityGroupLimitSet.new
@SecurityGroupLimitSet.deserialize(params['SecurityGroupLimitSet'])
end
@RequestId = params['RequestId']
end
end
# DescribeSecurityGroupPolicies请求参数结构体
class DescribeSecurityGroupPoliciesRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如：sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param Filters: 过滤条件,不支持同时指定SecurityGroupId和Filters参数。
# security-group-id - String - 安全组ID。
# ip - String - IP，支持IPV4和IPV6模糊匹配。
# address-module - String - IP地址模板或IP地址组模板ID。
# service-module - String - 协议端口模板或协议端口组模板ID。
# protocol-type - String - 安全组策略支持的协议，可选值：`TCP`, `UDP`, `ICMP`, `ICMPV6`, `GRE`, `ALL`。
# port - String - 是否必填：否 -协议端口，支持模糊匹配，值为`ALL`时，查询所有的端口。
# poly - String - 协议策略，可选值：`ALL`，所有策略；`ACCEPT`，允许；`DROP`，拒绝。
# direction - String - 协议规则，可选值：`ALL`，所有策略；`INBOUND`，入站规则；`OUTBOUND`，出站规则。
# description - String - 协议描述，该过滤条件支持模糊匹配。
# @type Filters: Array
attr_accessor :SecurityGroupId, :Filters
def initialize(securitygroupid=nil, filters=nil)
@SecurityGroupId = securitygroupid
@Filters = filters
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeSecurityGroupPolicies返回参数结构体
class DescribeSecurityGroupPoliciesResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroupPolicySet: 安全组规则集合。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroupPolicySet, :RequestId
def initialize(securitygrouppolicyset=nil, requestid=nil)
@SecurityGroupPolicySet = securitygrouppolicyset
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
@RequestId = params['RequestId']
end
end
# DescribeSecurityGroupReferences请求参数结构体
class DescribeSecurityGroupReferencesRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupIds: 安全组实例ID数组。格式如：['sg-12345678']
# @type SecurityGroupIds: Array
attr_accessor :SecurityGroupIds
def initialize(securitygroupids=nil)
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# DescribeSecurityGroupReferences返回参数结构体
class DescribeSecurityGroupReferencesResponse < TencentCloud::Common::AbstractModel
# @param ReferredSecurityGroupSet: 安全组被引用信息。
# @type ReferredSecurityGroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ReferredSecurityGroupSet, :RequestId
def initialize(referredsecuritygroupset=nil, requestid=nil)
@ReferredSecurityGroupSet = referredsecuritygroupset
@RequestId = requestid
end
def deserialize(params)
unless params['ReferredSecurityGroupSet'].nil?
@ReferredSecurityGroupSet = []
params['ReferredSecurityGroupSet'].each do |i|
referredsecuritygroup_tmp = ReferredSecurityGroup.new
referredsecuritygroup_tmp.deserialize(i)
@ReferredSecurityGroupSet << referredsecuritygroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSecurityGroups请求参数结构体
class DescribeSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupIds: 安全组实例ID，例如：sg-33ocnj9n，可通过DescribeSecurityGroups获取。每次请求的实例的上限为100。参数不支持同时指定SecurityGroupIds和Filters。
# @type SecurityGroupIds: Array
# @param Filters: 过滤条件，参数不支持同时指定SecurityGroupIds和Filters。
# security-group-id - String - （过滤条件）安全组ID。
# project-id - Integer - （过滤条件）项目ID。
# security-group-name - String - （过滤条件）安全组名称。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。使用请参考示例2。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。使用请参考示例3。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :SecurityGroupIds, :Filters, :Offset, :Limit
def initialize(securitygroupids=nil, filters=nil, offset=nil, limit=nil)
@SecurityGroupIds = securitygroupids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SecurityGroupIds = params['SecurityGroupIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeSecurityGroups返回参数结构体
class DescribeSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param SecurityGroupSet: 安全组对象。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityGroupSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SecurityGroupSet, :TotalCount, :RequestId
def initialize(securitygroupset=nil, totalcount=nil, requestid=nil)
@SecurityGroupSet = securitygroupset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SecurityGroupSet'].nil?
@SecurityGroupSet = []
params['SecurityGroupSet'].each do |i|
securitygroup_tmp = SecurityGroup.new
securitygroup_tmp.deserialize(i)
@SecurityGroupSet << securitygroup_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeServiceTemplateGroups请求参数结构体
class DescribeServiceTemplateGroupsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# service-template-group-name - String - （过滤条件）协议端口模板集合名称。
# service-template-group-id - String - （过滤条件）协议端口模板集合实例ID，例如：ppmg-e6dy460g。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeServiceTemplateGroups返回参数结构体
class DescribeServiceTemplateGroupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param ServiceTemplateGroupSet: 协议端口模板集合。
# @type ServiceTemplateGroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ServiceTemplateGroupSet, :RequestId
def initialize(totalcount=nil, servicetemplategroupset=nil, requestid=nil)
@TotalCount = totalcount
@ServiceTemplateGroupSet = servicetemplategroupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ServiceTemplateGroupSet'].nil?
@ServiceTemplateGroupSet = []
params['ServiceTemplateGroupSet'].each do |i|
servicetemplategroup_tmp = ServiceTemplateGroup.new
servicetemplategroup_tmp.deserialize(i)
@ServiceTemplateGroupSet << servicetemplategroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeServiceTemplates请求参数结构体
class DescribeServiceTemplatesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# service-template-name - 协议端口模板名称。
# service-template-id - 协议端口模板实例ID，例如：ppm-e6dy460g。
# service-port- 协议端口。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeServiceTemplates返回参数结构体
class DescribeServiceTemplatesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param ServiceTemplateSet: 协议端口模板对象。
# @type ServiceTemplateSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ServiceTemplateSet, :RequestId
def initialize(totalcount=nil, servicetemplateset=nil, requestid=nil)
@TotalCount = totalcount
@ServiceTemplateSet = servicetemplateset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ServiceTemplateSet'].nil?
@ServiceTemplateSet = []
params['ServiceTemplateSet'].each do |i|
servicetemplate_tmp = ServiceTemplate.new
servicetemplate_tmp.deserialize(i)
@ServiceTemplateSet << servicetemplate_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSubnets请求参数结构体
class DescribeSubnetsRequest < TencentCloud::Common::AbstractModel
# @param SubnetIds: 子网实例ID查询。形如：subnet-pxir56ns。每次请求的实例的上限为100。参数不支持同时指定SubnetIds和Filters。
# @type SubnetIds: Array
# @param Filters: 过滤条件，参数不支持同时指定SubnetIds和Filters。
# subnet-id - String - （过滤条件）Subnet实例名称。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# cidr-block - String - （过滤条件）子网网段，形如: 192.168.1.0 。
# is-default - Boolean - （过滤条件）是否是默认子网。
# is-remote-vpc-snat - Boolean - （过滤条件）是否为VPC SNAT地址池子网。
# subnet-name - String - （过滤条件）子网名称。
# zone - String - （过滤条件）可用区。
# tag-key - String -是否必填：否- （过滤条件）按照标签键进行过滤。
# tag:tag-key - String - 是否必填：否 - （过滤条件）按照标签键值对进行过滤。 tag-key使用具体的标签键进行替换。使用请参考示例2。
# cdc-id - String - 是否必填：否 - （过滤条件）按照cdc信息进行过滤。过滤出来制定cdc下的子网。
# is-cdc-subnet - String - 是否必填：否 - （过滤条件）按照是否是cdc子网进行过滤。取值：“0”-非cdc子网，“1”--cdc子网
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :SubnetIds, :Filters, :Offset, :Limit
def initialize(subnetids=nil, filters=nil, offset=nil, limit=nil)
@SubnetIds = subnetids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SubnetIds = params['SubnetIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeSubnets返回参数结构体
class DescribeSubnetsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param SubnetSet: 子网对象。
# @type SubnetSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :SubnetSet, :RequestId
def initialize(totalcount=nil, subnetset=nil, requestid=nil)
@TotalCount = totalcount
@SubnetSet = subnetset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['SubnetSet'].nil?
@SubnetSet = []
params['SubnetSet'].each do |i|
subnet_tmp = Subnet.new
subnet_tmp.deserialize(i)
@SubnetSet << subnet_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeTaskResult请求参数结构体
class DescribeTaskResultRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务ID。TaskId和DealName必填一个参数
# @type TaskId: Integer
# @param DealName: 计费订单号。TaskId和DealName必填一个参数
# @type DealName: String
attr_accessor :TaskId, :DealName
def initialize(taskid=nil, dealname=nil)
@TaskId = taskid
@DealName = dealname
end
def deserialize(params)
@TaskId = params['TaskId']
@DealName = params['DealName']
end
end
# DescribeTaskResult返回参数结构体
class DescribeTaskResultResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 任务ID
# @type TaskId: Integer
# @param Result: 执行结果，包括"SUCCESS", "FAILED", "RUNNING"
# @type Result: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :Result, :RequestId
def initialize(taskid=nil, result=nil, requestid=nil)
@TaskId = taskid
@Result = result
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@Result = params['Result']
@RequestId = params['RequestId']
end
end
# DescribeTemplateLimits请求参数结构体
class DescribeTemplateLimitsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeTemplateLimits返回参数结构体
class DescribeTemplateLimitsResponse < TencentCloud::Common::AbstractModel
# @param TemplateLimit: 参数模板配额对象。
# @type TemplateLimit: :class:`Tencentcloud::Vpc.v20170312.models.TemplateLimit`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TemplateLimit, :RequestId
def initialize(templatelimit=nil, requestid=nil)
@TemplateLimit = templatelimit
@RequestId = requestid
end
def deserialize(params)
unless params['TemplateLimit'].nil?
@TemplateLimit = TemplateLimit.new
@TemplateLimit.deserialize(params['TemplateLimit'])
end
@RequestId = params['RequestId']
end
end
# DescribeVpcEndPoint请求参数结构体
class DescribeVpcEndPointRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# end-point-service-id- String - （过滤条件）终端节点服务ID。
# end-point-name - String - （过滤条件）终端节点实例名称。
# end-point-id- String - （过滤条件）终端节点实例ID。
# vpc-id- String - （过滤条件）VPC实例ID。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 单页返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param EndPointId: 终端节点ID列表。
# @type EndPointId: Array
attr_accessor :Filters, :Offset, :Limit, :EndPointId
def initialize(filters=nil, offset=nil, limit=nil, endpointid=nil)
@Filters = filters
@Offset = offset
@Limit = limit
@EndPointId = endpointid
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
@EndPointId = params['EndPointId']
end
end
# DescribeVpcEndPoint返回参数结构体
class DescribeVpcEndPointResponse < TencentCloud::Common::AbstractModel
# @param EndPointSet: 终端节点对象。
# @type EndPointSet: Array
# @param TotalCount: 符合查询条件的终端节点个数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EndPointSet, :TotalCount, :RequestId
def initialize(endpointset=nil, totalcount=nil, requestid=nil)
@EndPointSet = endpointset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['EndPointSet'].nil?
@EndPointSet = []
params['EndPointSet'].each do |i|
endpoint_tmp = EndPoint.new
endpoint_tmp.deserialize(i)
@EndPointSet << endpoint_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpcEndPointService请求参数结构体
class DescribeVpcEndPointServiceRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# service-id- String - （过滤条件）终端节点服务唯一ID。
# service-name - String - （过滤条件）终端节点实例名称。
# service-instance-id - String - （过滤条件）后端服务的唯一ID，比如lb-xxx。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 单页返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param EndPointServiceIds: 终端节点服务ID。
# @type EndPointServiceIds: Array
attr_accessor :Filters, :Offset, :Limit, :EndPointServiceIds
def initialize(filters=nil, offset=nil, limit=nil, endpointserviceids=nil)
@Filters = filters
@Offset = offset
@Limit = limit
@EndPointServiceIds = endpointserviceids
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
@EndPointServiceIds = params['EndPointServiceIds']
end
end
# DescribeVpcEndPointService返回参数结构体
class DescribeVpcEndPointServiceResponse < TencentCloud::Common::AbstractModel
# @param EndPointServiceSet: 终端节点服务对象数组。
# @type EndPointServiceSet: Array
# @param TotalCount: 符合查询条件的个数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EndPointServiceSet, :TotalCount, :RequestId
def initialize(endpointserviceset=nil, totalcount=nil, requestid=nil)
@EndPointServiceSet = endpointserviceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['EndPointServiceSet'].nil?
@EndPointServiceSet = []
params['EndPointServiceSet'].each do |i|
endpointservice_tmp = EndPointService.new
endpointservice_tmp.deserialize(i)
@EndPointServiceSet << endpointservice_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpcEndPointServiceWhiteList请求参数结构体
class DescribeVpcEndPointServiceWhiteListRequest < TencentCloud::Common::AbstractModel
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 单页返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param Filters: 过滤条件。
# user-uin String - （过滤条件）用户UIN。
# end-point-service-id String - （过滤条件）终端节点服务ID。
# @type Filters: Array
attr_accessor :Offset, :Limit, :Filters
def initialize(offset=nil, limit=nil, filters=nil)
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeVpcEndPointServiceWhiteList返回参数结构体
class DescribeVpcEndPointServiceWhiteListResponse < TencentCloud::Common::AbstractModel
# @param VpcEndpointServiceUserSet: 白名单对象数组。
# @type VpcEndpointServiceUserSet: Array
# @param TotalCount: 符合条件的白名单个数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VpcEndpointServiceUserSet, :TotalCount, :RequestId
def initialize(vpcendpointserviceuserset=nil, totalcount=nil, requestid=nil)
@VpcEndpointServiceUserSet = vpcendpointserviceuserset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['VpcEndpointServiceUserSet'].nil?
@VpcEndpointServiceUserSet = []
params['VpcEndpointServiceUserSet'].each do |i|
vpcendpointserviceuser_tmp = VpcEndPointServiceUser.new
vpcendpointserviceuser_tmp.deserialize(i)
@VpcEndpointServiceUserSet << vpcendpointserviceuser_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpcInstances请求参数结构体
class DescribeVpcInstancesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件，参数不支持同时指定RouteTableIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID，形如：vpc-f49l6u0z。
# instance-id - String - （过滤条件）云主机实例ID。
# instance-name - String - （过滤条件）云主机名称。
# @type Filters: Array
# @param Offset: 偏移量。
# @type Offset: Integer
# @param Limit: 请求对象个数。
# @type Limit: Integer
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpcInstances返回参数结构体
class DescribeVpcInstancesResponse < TencentCloud::Common::AbstractModel
# @param InstanceSet: 云主机实例列表。
# @type InstanceSet: Array
# @param TotalCount: 满足条件的云主机实例个数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceSet, :TotalCount, :RequestId
def initialize(instanceset=nil, totalcount=nil, requestid=nil)
@InstanceSet = instanceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
cvminstance_tmp = CvmInstance.new
cvminstance_tmp.deserialize(i)
@InstanceSet << cvminstance_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpcIpv6Addresses请求参数结构体
class DescribeVpcIpv6AddressesRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`，形如：`vpc-f49l6u0z`。
# @type VpcId: String
# @param Ipv6Addresses: `IP`地址列表，批量查询单次请求最多支持`10`个。
# @type Ipv6Addresses: Array
# @param Offset: 偏移量。
# @type Offset: Integer
# @param Limit: 返回数量。
# @type Limit: Integer
attr_accessor :VpcId, :Ipv6Addresses, :Offset, :Limit
def initialize(vpcid=nil, ipv6addresses=nil, offset=nil, limit=nil)
@VpcId = vpcid
@Ipv6Addresses = ipv6addresses
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpcId = params['VpcId']
@Ipv6Addresses = params['Ipv6Addresses']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpcIpv6Addresses返回参数结构体
class DescribeVpcIpv6AddressesResponse < TencentCloud::Common::AbstractModel
# @param Ipv6AddressSet: `IPv6`地址列表。
# @type Ipv6AddressSet: Array
# @param TotalCount: `IPv6`地址总数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ipv6AddressSet, :TotalCount, :RequestId
def initialize(ipv6addressset=nil, totalcount=nil, requestid=nil)
@Ipv6AddressSet = ipv6addressset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['Ipv6AddressSet'].nil?
@Ipv6AddressSet = []
params['Ipv6AddressSet'].each do |i|
vpcipv6address_tmp = VpcIpv6Address.new
vpcipv6address_tmp.deserialize(i)
@Ipv6AddressSet << vpcipv6address_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpcLimits请求参数结构体
class DescribeVpcLimitsRequest < TencentCloud::Common::AbstractModel
# @param LimitTypes: 配额名称。每次最大查询100个配额类型。
# @type LimitTypes: Array
attr_accessor :LimitTypes
def initialize(limittypes=nil)
@LimitTypes = limittypes
end
def deserialize(params)
@LimitTypes = params['LimitTypes']
end
end
# DescribeVpcLimits返回参数结构体
class DescribeVpcLimitsResponse < TencentCloud::Common::AbstractModel
# @param VpcLimitSet: 私有网络配额
# @type VpcLimitSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VpcLimitSet, :RequestId
def initialize(vpclimitset=nil, requestid=nil)
@VpcLimitSet = vpclimitset
@RequestId = requestid
end
def deserialize(params)
unless params['VpcLimitSet'].nil?
@VpcLimitSet = []
params['VpcLimitSet'].each do |i|
vpclimit_tmp = VpcLimit.new
vpclimit_tmp.deserialize(i)
@VpcLimitSet << vpclimit_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpcPrivateIpAddresses请求参数结构体
class DescribeVpcPrivateIpAddressesRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`，形如：`vpc-f49l6u0z`。
# @type VpcId: String
# @param PrivateIpAddresses: 内网`IP`地址列表，批量查询单次请求最多支持`10`个。
# @type PrivateIpAddresses: Array
attr_accessor :VpcId, :PrivateIpAddresses
def initialize(vpcid=nil, privateipaddresses=nil)
@VpcId = vpcid
@PrivateIpAddresses = privateipaddresses
end
def deserialize(params)
@VpcId = params['VpcId']
@PrivateIpAddresses = params['PrivateIpAddresses']
end
end
# DescribeVpcPrivateIpAddresses返回参数结构体
class DescribeVpcPrivateIpAddressesResponse < TencentCloud::Common::AbstractModel
# @param VpcPrivateIpAddressSet: 内网`IP`地址信息列表。
# @type VpcPrivateIpAddressSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VpcPrivateIpAddressSet, :RequestId
def initialize(vpcprivateipaddressset=nil, requestid=nil)
@VpcPrivateIpAddressSet = vpcprivateipaddressset
@RequestId = requestid
end
def deserialize(params)
unless params['VpcPrivateIpAddressSet'].nil?
@VpcPrivateIpAddressSet = []
params['VpcPrivateIpAddressSet'].each do |i|
vpcprivateipaddress_tmp = VpcPrivateIpAddress.new
vpcprivateipaddress_tmp.deserialize(i)
@VpcPrivateIpAddressSet << vpcprivateipaddress_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpcResourceDashboard请求参数结构体
class DescribeVpcResourceDashboardRequest < TencentCloud::Common::AbstractModel
# @param VpcIds: Vpc实例ID，例如：vpc-f1xjkw1b。
# @type VpcIds: Array
attr_accessor :VpcIds
def initialize(vpcids=nil)
@VpcIds = vpcids
end
def deserialize(params)
@VpcIds = params['VpcIds']
end
end
# DescribeVpcResourceDashboard返回参数结构体
class DescribeVpcResourceDashboardResponse < TencentCloud::Common::AbstractModel
# @param ResourceDashboardSet: 资源对象列表。
# @type ResourceDashboardSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResourceDashboardSet, :RequestId
def initialize(resourcedashboardset=nil, requestid=nil)
@ResourceDashboardSet = resourcedashboardset
@RequestId = requestid
end
def deserialize(params)
unless params['ResourceDashboardSet'].nil?
@ResourceDashboardSet = []
params['ResourceDashboardSet'].each do |i|
resourcedashboard_tmp = ResourceDashboard.new
resourcedashboard_tmp.deserialize(i)
@ResourceDashboardSet << resourcedashboard_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpcTaskResult请求参数结构体
class DescribeVpcTaskResultRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务请求返回的RequestId。
# @type TaskId: String
attr_accessor :TaskId
def initialize(taskid=nil)
@TaskId = taskid
end
def deserialize(params)
@TaskId = params['TaskId']
end
end
# DescribeVpcTaskResult返回参数结构体
class DescribeVpcTaskResultResponse < TencentCloud::Common::AbstractModel
# @param Status: 异步任务执行结果。结果：SUCCESS、FAILED、RUNNING。3者其中之一。其中SUCCESS表示任务执行成功，FAILED表示任务执行失败，RUNNING表示任务执行中。
# @type Status: String
# @param Output: 异步任务执行输出。
# @type Output: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :Output, :RequestId
def initialize(status=nil, output=nil, requestid=nil)
@Status = status
@Output = output
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@Output = params['Output']
@RequestId = params['RequestId']
end
end
# DescribeVpcs请求参数结构体
class DescribeVpcsRequest < TencentCloud::Common::AbstractModel
# @param VpcIds: VPC实例ID。形如：vpc-f49l6u0z。每次请求的实例的上限为100。参数不支持同时指定VpcIds和Filters。
# @type VpcIds: Array
# @param Filters: 过滤条件，不支持同时指定VpcIds和Filters参数。
# 支持的过滤条件如下：
# vpc-name：VPC实例名称。
# is-default ：是否默认VPC。
# vpc-id ：VPC实例ID，例如：vpc-f49l6u0z。
# cidr-block：VPC的CIDR。
# tag-key ：按照标签键进行过滤，非必填参数。
# tag:tag-key：按照标签键值对进行过滤，非必填参数。 其中 tag-key 请使用具体的标签键进行替换，可参考示例2。
# **说明：**若同一个过滤条件（Filter）存在多个Values，则同一Filter下Values间的关系为逻辑或（OR）关系；若存在多个过滤条件（Filter），Filter之间的关系为逻辑与（AND）关系。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。
# @type Offset: String
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: String
attr_accessor :VpcIds, :Filters, :Offset, :Limit
def initialize(vpcids=nil, filters=nil, offset=nil, limit=nil)
@VpcIds = vpcids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpcIds = params['VpcIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpcs返回参数结构体
class DescribeVpcsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param VpcSet: VPC对象。
# @type VpcSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :VpcSet, :RequestId
def initialize(totalcount=nil, vpcset=nil, requestid=nil)
@TotalCount = totalcount
@VpcSet = vpcset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['VpcSet'].nil?
@VpcSet = []
params['VpcSet'].each do |i|
vpc_tmp = Vpc.new
vpc_tmp.deserialize(i)
@VpcSet << vpc_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpnConnections请求参数结构体
class DescribeVpnConnectionsRequest < TencentCloud::Common::AbstractModel
# @param VpnConnectionIds: VPN通道实例ID。形如：vpnx-f49l6u0z。每次请求的实例的上限为100。参数不支持同时指定VpnConnectionIds和Filters。
# @type VpnConnectionIds: Array
# @param Filters: 过滤条件。每次请求的Filters的上限为10，Filter.Values的上限为5。参数不支持同时指定VpnConnectionIds和Filters。
# vpc-id - String - VPC实例ID，形如：`vpc-0a36uwkr`。
# vpn-gateway-id - String - VPN网关实例ID，形如：`vpngw-p4lmqawn`。
# customer-gateway-id - String - 对端网关实例ID，形如：`cgw-l4rblw63`。
# vpn-connection-name - String - 通道名称，形如：`test-vpn`。
# vpn-connection-id - String - 通道实例ID，形如：`vpnx-5p7vkch8"`。
# @type Filters: Array
# @param Offset: 偏移量，默认为0。关于Offset的更进一步介绍请参考 API 简介中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :VpnConnectionIds, :Filters, :Offset, :Limit
def initialize(vpnconnectionids=nil, filters=nil, offset=nil, limit=nil)
@VpnConnectionIds = vpnconnectionids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpnConnectionIds = params['VpnConnectionIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpnConnections返回参数结构体
class DescribeVpnConnectionsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param VpnConnectionSet: VPN通道实例。
# @type VpnConnectionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :VpnConnectionSet, :RequestId
def initialize(totalcount=nil, vpnconnectionset=nil, requestid=nil)
@TotalCount = totalcount
@VpnConnectionSet = vpnconnectionset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['VpnConnectionSet'].nil?
@VpnConnectionSet = []
params['VpnConnectionSet'].each do |i|
vpnconnection_tmp = VpnConnection.new
vpnconnection_tmp.deserialize(i)
@VpnConnectionSet << vpnconnection_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpnGatewayCcnRoutes请求参数结构体
class DescribeVpnGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID
# @type VpnGatewayId: String
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
attr_accessor :VpnGatewayId, :Offset, :Limit
def initialize(vpngatewayid=nil, offset=nil, limit=nil)
@VpnGatewayId = vpngatewayid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpnGatewayCcnRoutes返回参数结构体
class DescribeVpnGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RouteSet: 云联网路由（IDC网段）列表。
# @type RouteSet: Array
# @param TotalCount: 符合条件的对象数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RouteSet, :TotalCount, :RequestId
def initialize(routeset=nil, totalcount=nil, requestid=nil)
@RouteSet = routeset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
vpngwccnroutes_tmp = VpngwCcnRoutes.new
vpngwccnroutes_tmp.deserialize(i)
@RouteSet << vpngwccnroutes_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVpnGatewayRoutes请求参数结构体
class DescribeVpnGatewayRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关的ID
# @type VpnGatewayId: String
# @param Filters: 过滤条件, 条件包括(DestinationCidr, InstanceId,InstanceType)
# @type Filters: Array
# @param Offset: 偏移量, 默认0
# @type Offset: Integer
# @param Limit: 单页个数, 默认20, 最大值100
# @type Limit: Integer
attr_accessor :VpnGatewayId, :Filters, :Offset, :Limit
def initialize(vpngatewayid=nil, filters=nil, offset=nil, limit=nil)
@VpnGatewayId = vpngatewayid
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpnGatewayRoutes返回参数结构体
class DescribeVpnGatewayRoutesResponse < TencentCloud::Common::AbstractModel
# @param Routes: VPN网关目的路由
# @type Routes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Routes, :RequestId
def initialize(routes=nil, requestid=nil)
@Routes = routes
@RequestId = requestid
end
def deserialize(params)
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngatewayroute_tmp = VpnGatewayRoute.new
vpngatewayroute_tmp.deserialize(i)
@Routes << vpngatewayroute_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpnGateways请求参数结构体
class DescribeVpnGatewaysRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayIds: VPN网关实例ID。形如：vpngw-f49l6u0z。每次请求的实例的上限为100。参数不支持同时指定VpnGatewayIds和Filters。
# @type VpnGatewayIds: Array
# @param Filters: 过滤条件，参数不支持同时指定VpnGatewayIds和Filters。
# vpc-id - String - （过滤条件）VPC实例ID形如：vpc-f49l6u0z。
# vpn-gateway-id - String - （过滤条件）VPN实例ID形如：vpngw-5aluhh9t。
# vpn-gateway-name - String - （过滤条件）VPN实例名称。
# type - String - （过滤条件）VPN网关类型：'IPSEC', 'SSL'。
# public-ip-address- String - （过滤条件）公网IP。
# renew-flag - String - （过滤条件）网关续费类型，手动续费：'NOTIFY_AND_MANUAL_RENEW'、自动续费：'NOTIFY_AND_AUTO_RENEW'。
# zone - String - （过滤条件）VPN所在可用区，形如：ap-guangzhou-2。
# @type Filters: Array
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 请求对象个数
# @type Limit: Integer
attr_accessor :VpnGatewayIds, :Filters, :Offset, :Limit
def initialize(vpngatewayids=nil, filters=nil, offset=nil, limit=nil)
@VpnGatewayIds = vpngatewayids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@VpnGatewayIds = params['VpnGatewayIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filterobject_tmp = FilterObject.new
filterobject_tmp.deserialize(i)
@Filters << filterobject_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeVpnGateways返回参数结构体
class DescribeVpnGatewaysResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param VpnGatewaySet: VPN网关实例详细信息列表。
# @type VpnGatewaySet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :VpnGatewaySet, :RequestId
def initialize(totalcount=nil, vpngatewayset=nil, requestid=nil)
@TotalCount = totalcount
@VpnGatewaySet = vpngatewayset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['VpnGatewaySet'].nil?
@VpnGatewaySet = []
params['VpnGatewaySet'].each do |i|
vpngateway_tmp = VpnGateway.new
vpngateway_tmp.deserialize(i)
@VpnGatewaySet << vpngateway_tmp
end
end
@RequestId = params['RequestId']
end
end
# NAT网关的端口转发规则
class DestinationIpPortTranslationNatRule < TencentCloud::Common::AbstractModel
# @param IpProtocol: 网络协议，可选值：`TCP`、`UDP`。
# @type IpProtocol: String
# @param PublicIpAddress: 弹性IP。
# @type PublicIpAddress: String
# @param PublicPort: 公网端口。
# @type PublicPort: Integer
# @param PrivateIpAddress: 内网地址。
# @type PrivateIpAddress: String
# @param PrivatePort: 内网端口。
# @type PrivatePort: Integer
# @param Description: NAT网关转发规则描述。
# @type Description: String
attr_accessor :IpProtocol, :PublicIpAddress, :PublicPort, :PrivateIpAddress, :PrivatePort, :Description
def initialize(ipprotocol=nil, publicipaddress=nil, publicport=nil, privateipaddress=nil, privateport=nil, description=nil)
@IpProtocol = ipprotocol
@PublicIpAddress = publicipaddress
@PublicPort = publicport
@PrivateIpAddress = privateipaddress
@PrivatePort = privateport
@Description = description
end
def deserialize(params)
@IpProtocol = params['IpProtocol']
@PublicIpAddress = params['PublicIpAddress']
@PublicPort = params['PublicPort']
@PrivateIpAddress = params['PrivateIpAddress']
@PrivatePort = params['PrivatePort']
@Description = params['Description']
end
end
# DetachCcnInstances请求参数结构体
class DetachCcnInstancesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Instances: 要解关联网络实例列表
# @type Instances: Array
attr_accessor :CcnId, :Instances
def initialize(ccnid=nil, instances=nil)
@CcnId = ccnid
@Instances = instances
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
end
end
# DetachCcnInstances返回参数结构体
class DetachCcnInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DetachClassicLinkVpc请求参数结构体
class DetachClassicLinkVpcRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type VpcId: String
# @param InstanceIds: CVM实例ID查询。形如：ins-r8hr2upy。
# @type InstanceIds: Array
attr_accessor :VpcId, :InstanceIds
def initialize(vpcid=nil, instanceids=nil)
@VpcId = vpcid
@InstanceIds = instanceids
end
def deserialize(params)
@VpcId = params['VpcId']
@InstanceIds = params['InstanceIds']
end
end
# DetachClassicLinkVpc返回参数结构体
class DetachClassicLinkVpcResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DetachNetworkInterface请求参数结构体
class DetachNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param InstanceId: CVM实例ID。形如：ins-r8hr2upy。
# @type InstanceId: String
attr_accessor :NetworkInterfaceId, :InstanceId
def initialize(networkinterfaceid=nil, instanceid=nil)
@NetworkInterfaceId = networkinterfaceid
@InstanceId = instanceid
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
@InstanceId = params['InstanceId']
end
end
# DetachNetworkInterface返回参数结构体
class DetachNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述 DhcpIp 信息
class DhcpIp < TencentCloud::Common::AbstractModel
# @param DhcpIpId: `DhcpIp`的`ID`，是`DhcpIp`的唯一标识。
# @type DhcpIpId: String
# @param VpcId: `DhcpIp`所在私有网络`ID`。
# @type VpcId: String
# @param SubnetId: `DhcpIp`所在子网`ID`。
# @type SubnetId: String
# @param DhcpIpName: `DhcpIp`的名称。
# @type DhcpIpName: String
# @param PrivateIpAddress: IP地址。
# @type PrivateIpAddress: String
# @param AddressIp: 绑定`EIP`。
# @type AddressIp: String
# @param NetworkInterfaceId: `DhcpIp`关联弹性网卡`ID`。
# @type NetworkInterfaceId: String
# @param InstanceId: 被绑定的实例`ID`。
# @type InstanceId: String
# @param State: 状态：
# `AVAILABLE`：运行中
# `UNBIND`：未绑定
# @type State: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
attr_accessor :DhcpIpId, :VpcId, :SubnetId, :DhcpIpName, :PrivateIpAddress, :AddressIp, :NetworkInterfaceId, :InstanceId, :State, :CreatedTime
def initialize(dhcpipid=nil, vpcid=nil, subnetid=nil, dhcpipname=nil, privateipaddress=nil, addressip=nil, networkinterfaceid=nil, instanceid=nil, state=nil, createdtime=nil)
@DhcpIpId = dhcpipid
@VpcId = vpcid
@SubnetId = subnetid
@DhcpIpName = dhcpipname
@PrivateIpAddress = privateipaddress
@AddressIp = addressip
@NetworkInterfaceId = networkinterfaceid
@InstanceId = instanceid
@State = state
@CreatedTime = createdtime
end
def deserialize(params)
@DhcpIpId = params['DhcpIpId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@DhcpIpName = params['DhcpIpName']
@PrivateIpAddress = params['PrivateIpAddress']
@AddressIp = params['AddressIp']
@NetworkInterfaceId = params['NetworkInterfaceId']
@InstanceId = params['InstanceId']
@State = params['State']
@CreatedTime = params['CreatedTime']
end
end
# 专线网关对象。
class DirectConnectGateway < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关`ID`。
# @type DirectConnectGatewayId: String
# @param DirectConnectGatewayName: 专线网关名称。
# @type DirectConnectGatewayName: String
# @param VpcId: 专线网关关联`VPC`实例`ID`。
# @type VpcId: String
# @param NetworkType: 关联网络类型：
# `VPC` - 私有网络
# `CCN` - 云联网
# @type NetworkType: String
# @param NetworkInstanceId: 关联网络实例`ID`：
# `NetworkType`为`VPC`时，这里为私有网络实例`ID`
# `NetworkType`为`CCN`时，这里为云联网实例`ID`
# @type NetworkInstanceId: String
# @param GatewayType: 网关类型：
# NORMAL - 标准型，注：云联网只支持标准型
# NAT - NAT型
# NAT类型支持网络地址转换配置，类型确定后不能修改；一个私有网络可以创建一个NAT类型的专线网关和一个非NAT类型的专线网关
# @type GatewayType: String
# @param CreateTime: 创建时间。
# @type CreateTime: String
# @param DirectConnectGatewayIp: 专线网关IP。
# @type DirectConnectGatewayIp: String
# @param CcnId: 专线网关关联`CCN`实例`ID`。
# @type CcnId: String
# @param CcnRouteType: 云联网路由学习类型：
# `BGP` - 自动学习。
# `STATIC` - 静态，即用户配置。
# @type CcnRouteType: String
# @param EnableBGP: 是否启用BGP。
# @type EnableBGP: Boolean
# @param EnableBGPCommunity: 开启和关闭BGP的community属性。
# @type EnableBGPCommunity: Boolean
# @param NatGatewayId: 绑定的NAT网关ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NatGatewayId: String
# @param VXLANSupport: 专线网关是否支持VXLAN架构
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VXLANSupport: Array
# @param ModeType: 云联网路由发布模式：`standard`（标准模式）、`exquisite`（精细模式）。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ModeType: String
# @param LocalZone: 是否为localZone专线网关。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalZone: Boolean
# @param Zone: 专线网关所在可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Zone: String
# @param EnableFlowDetails: 网关流控明细启用状态：
# 0：关闭
# 1：开启
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableFlowDetails: Integer
# @param FlowDetailsUpdateTime: 开启、关闭网关流控明细时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FlowDetailsUpdateTime: String
# @param NewAfc: 是否支持开启网关流控明细
# 0：不支持
# 1：支持
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NewAfc: Integer
# @param AccessNetworkType: 专线网关接入网络类型：
# `VXLAN` - VXLAN类型。
# `MPLS` - MPLS类型。
# `Hybrid` - Hybrid类型。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AccessNetworkType: String
# @param HaZoneList: 跨可用区容灾专线网关的可用区列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HaZoneList: Array
attr_accessor :DirectConnectGatewayId, :DirectConnectGatewayName, :VpcId, :NetworkType, :NetworkInstanceId, :GatewayType, :CreateTime, :DirectConnectGatewayIp, :CcnId, :CcnRouteType, :EnableBGP, :EnableBGPCommunity, :NatGatewayId, :VXLANSupport, :ModeType, :LocalZone, :Zone, :EnableFlowDetails, :FlowDetailsUpdateTime, :NewAfc, :AccessNetworkType, :HaZoneList
def initialize(directconnectgatewayid=nil, directconnectgatewayname=nil, vpcid=nil, networktype=nil, networkinstanceid=nil, gatewaytype=nil, createtime=nil, directconnectgatewayip=nil, ccnid=nil, ccnroutetype=nil, enablebgp=nil, enablebgpcommunity=nil, natgatewayid=nil, vxlansupport=nil, modetype=nil, localzone=nil, zone=nil, enableflowdetails=nil, flowdetailsupdatetime=nil, newafc=nil, accessnetworktype=nil, hazonelist=nil)
@DirectConnectGatewayId = directconnectgatewayid
@DirectConnectGatewayName = directconnectgatewayname
@VpcId = vpcid
@NetworkType = networktype
@NetworkInstanceId = networkinstanceid
@GatewayType = gatewaytype
@CreateTime = createtime
@DirectConnectGatewayIp = directconnectgatewayip
@CcnId = ccnid
@CcnRouteType = ccnroutetype
@EnableBGP = enablebgp
@EnableBGPCommunity = enablebgpcommunity
@NatGatewayId = natgatewayid
@VXLANSupport = vxlansupport
@ModeType = modetype
@LocalZone = localzone
@Zone = zone
@EnableFlowDetails = enableflowdetails
@FlowDetailsUpdateTime = flowdetailsupdatetime
@NewAfc = newafc
@AccessNetworkType = accessnetworktype
@HaZoneList = hazonelist
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@DirectConnectGatewayName = params['DirectConnectGatewayName']
@VpcId = params['VpcId']
@NetworkType = params['NetworkType']
@NetworkInstanceId = params['NetworkInstanceId']
@GatewayType = params['GatewayType']
@CreateTime = params['CreateTime']
@DirectConnectGatewayIp = params['DirectConnectGatewayIp']
@CcnId = params['CcnId']
@CcnRouteType = params['CcnRouteType']
@EnableBGP = params['EnableBGP']
@EnableBGPCommunity = params['EnableBGPCommunity']
@NatGatewayId = params['NatGatewayId']
@VXLANSupport = params['VXLANSupport']
@ModeType = params['ModeType']
@LocalZone = params['LocalZone']
@Zone = params['Zone']
@EnableFlowDetails = params['EnableFlowDetails']
@FlowDetailsUpdateTime = params['FlowDetailsUpdateTime']
@NewAfc = params['NewAfc']
@AccessNetworkType = params['AccessNetworkType']
@HaZoneList = params['HaZoneList']
end
end
# 专线网关云联网路由（IDC网段）对象
class DirectConnectGatewayCcnRoute < TencentCloud::Common::AbstractModel
# @param RouteId: 路由ID。
# @type RouteId: String
# @param DestinationCidrBlock: IDC网段。
# @type DestinationCidrBlock: String
# @param ASPath: `BGP`的`AS-Path`属性。
# @type ASPath: Array
# @param Description: 备注
# @type Description: String
# @param UpdateTime: 最后更新时间
# @type UpdateTime: String
attr_accessor :RouteId, :DestinationCidrBlock, :ASPath, :Description, :UpdateTime
def initialize(routeid=nil, destinationcidrblock=nil, aspath=nil, description=nil, updatetime=nil)
@RouteId = routeid
@DestinationCidrBlock = destinationcidrblock
@ASPath = aspath
@Description = description
@UpdateTime = updatetime
end
def deserialize(params)
@RouteId = params['RouteId']
@DestinationCidrBlock = params['DestinationCidrBlock']
@ASPath = params['ASPath']
@Description = params['Description']
@UpdateTime = params['UpdateTime']
end
end
# IDC子网信息
class DirectConnectSubnet < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关ID
# @type DirectConnectGatewayId: String
# @param CidrBlock: IDC子网网段
# @type CidrBlock: String
attr_accessor :DirectConnectGatewayId, :CidrBlock
def initialize(directconnectgatewayid=nil, cidrblock=nil)
@DirectConnectGatewayId = directconnectgatewayid
@CidrBlock = cidrblock
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@CidrBlock = params['CidrBlock']
end
end
# DisableCcnRoutes请求参数结构体
class DisableCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param RouteIds: CCN路由策略唯一ID。形如：ccnr-f49l6u0z。
# @type RouteIds: Array
attr_accessor :CcnId, :RouteIds
def initialize(ccnid=nil, routeids=nil)
@CcnId = ccnid
@RouteIds = routeids
end
def deserialize(params)
@CcnId = params['CcnId']
@RouteIds = params['RouteIds']
end
end
# DisableCcnRoutes返回参数结构体
class DisableCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisableGatewayFlowMonitor请求参数结构体
class DisableGatewayFlowMonitorRequest < TencentCloud::Common::AbstractModel
# @param GatewayId: 网关实例ID，目前我们支持的网关实例类型有，
# 专线网关实例ID，形如，`dcg-ltjahce6`；
# Nat网关实例ID，形如，`nat-ltjahce6`；
# VPN网关实例ID，形如，`vpn-ltjahce6`。
# @type GatewayId: String
attr_accessor :GatewayId
def initialize(gatewayid=nil)
@GatewayId = gatewayid
end
def deserialize(params)
@GatewayId = params['GatewayId']
end
end
# DisableGatewayFlowMonitor返回参数结构体
class DisableGatewayFlowMonitorResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisableRoutes请求参数结构体
class DisableRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表唯一ID。
# @type RouteTableId: String
# @param RouteIds: 路由策略ID。不能和RouteItemIds同时使用，但至少输入一个。该参数取值可通过查询路由列表（[DescribeRouteTables](https://cloud.tencent.com/document/product/215/15763)）获取。
# @type RouteIds: Array
# @param RouteItemIds: 路由策略唯一ID。不能和RouteIds同时使用，但至少输入一个。该参数取值可通过查询路由列表（[DescribeRouteTables](https://cloud.tencent.com/document/product/215/15763)）获取。
# @type RouteItemIds: Array
attr_accessor :RouteTableId, :RouteIds, :RouteItemIds
def initialize(routetableid=nil, routeids=nil, routeitemids=nil)
@RouteTableId = routetableid
@RouteIds = routeids
@RouteItemIds = routeitemids
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteIds = params['RouteIds']
@RouteItemIds = params['RouteItemIds']
end
end
# DisableRoutes返回参数结构体
class DisableRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateAddress请求参数结构体
class DisassociateAddressRequest < TencentCloud::Common::AbstractModel
# @param AddressId: 标识 EIP 的唯一 ID。EIP 唯一 ID 形如：`eip-11112222`。
# @type AddressId: String
# @param ReallocateNormalPublicIp: 表示解绑 EIP 之后是否分配普通公网 IP。取值范围：
TRUE：表示解绑 EIP 之后分配普通公网 IP。
FALSE：表示解绑 EIP 之后不分配普通公网 IP。
默认取值：FALSE。
只有满足以下条件时才能指定该参数：
只有在解绑主网卡的主内网 IP 上的 EIP 时才能指定该参数。
解绑 EIP 后重新分配普通公网 IP 操作一个账号每天最多操作 10 次；详情可通过 [DescribeAddressQuota](https://cloud.tencent.com/document/api/213/1378) 接口获取。
# @type ReallocateNormalPublicIp: Boolean
attr_accessor :AddressId, :ReallocateNormalPublicIp
def initialize(addressid=nil, reallocatenormalpublicip=nil)
@AddressId = addressid
@ReallocateNormalPublicIp = reallocatenormalpublicip
end
def deserialize(params)
@AddressId = params['AddressId']
@ReallocateNormalPublicIp = params['ReallocateNormalPublicIp']
end
end
# DisassociateAddress返回参数结构体
class DisassociateAddressResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# DisassociateDhcpIpWithAddressIp请求参数结构体
class DisassociateDhcpIpWithAddressIpRequest < TencentCloud::Common::AbstractModel
# @param DhcpIpId: `DhcpIp`唯一`ID`，形如：`dhcpip-9o233uri`。必须是已绑定`EIP`的`DhcpIp`。
# @type DhcpIpId: String
attr_accessor :DhcpIpId
def initialize(dhcpipid=nil)
@DhcpIpId = dhcpipid
end
def deserialize(params)
@DhcpIpId = params['DhcpIpId']
end
end
# DisassociateDhcpIpWithAddressIp返回参数结构体
class DisassociateDhcpIpWithAddressIpResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateDirectConnectGatewayNatGateway请求参数结构体
class DisassociateDirectConnectGatewayNatGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 专线网关ID。
# @type VpcId: String
# @param NatGatewayId: NAT网关ID。
# @type NatGatewayId: String
# @param DirectConnectGatewayId: VPC实例ID。可通过DescribeVpcs接口返回值中的VpcId获取。
# @type DirectConnectGatewayId: String
attr_accessor :VpcId, :NatGatewayId, :DirectConnectGatewayId
def initialize(vpcid=nil, natgatewayid=nil, directconnectgatewayid=nil)
@VpcId = vpcid
@NatGatewayId = natgatewayid
@DirectConnectGatewayId = directconnectgatewayid
end
def deserialize(params)
@VpcId = params['VpcId']
@NatGatewayId = params['NatGatewayId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
end
end
# DisassociateDirectConnectGatewayNatGateway返回参数结构体
class DisassociateDirectConnectGatewayNatGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateNatGatewayAddress请求参数结构体
class DisassociateNatGatewayAddressRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param PublicIpAddresses: 待解绑NAT网关的弹性IP数组。
# @type PublicIpAddresses: Array
attr_accessor :NatGatewayId, :PublicIpAddresses
def initialize(natgatewayid=nil, publicipaddresses=nil)
@NatGatewayId = natgatewayid
@PublicIpAddresses = publicipaddresses
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@PublicIpAddresses = params['PublicIpAddresses']
end
end
# DisassociateNatGatewayAddress返回参数结构体
class DisassociateNatGatewayAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateNetworkAclSubnets请求参数结构体
class DisassociateNetworkAclSubnetsRequest < TencentCloud::Common::AbstractModel
# @param NetworkAclId: 网络ACL实例ID。例如：acl-12345678。
# @type NetworkAclId: String
# @param SubnetIds: 子网实例ID数组。例如：[subnet-12345678]
# @type SubnetIds: Array
attr_accessor :NetworkAclId, :SubnetIds
def initialize(networkaclid=nil, subnetids=nil)
@NetworkAclId = networkaclid
@SubnetIds = subnetids
end
def deserialize(params)
@NetworkAclId = params['NetworkAclId']
@SubnetIds = params['SubnetIds']
end
end
# DisassociateNetworkAclSubnets返回参数结构体
class DisassociateNetworkAclSubnetsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateNetworkInterfaceSecurityGroups请求参数结构体
class DisassociateNetworkInterfaceSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceIds: 弹性网卡实例ID。形如：eni-pxir56ns。每次请求的实例的上限为100。
# @type NetworkInterfaceIds: Array
# @param SecurityGroupIds: 安全组实例ID，例如：sg-33ocnj9n，可通过DescribeSecurityGroups获取。每次请求的实例的上限为100。
# @type SecurityGroupIds: Array
attr_accessor :NetworkInterfaceIds, :SecurityGroupIds
def initialize(networkinterfaceids=nil, securitygroupids=nil)
@NetworkInterfaceIds = networkinterfaceids
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@NetworkInterfaceIds = params['NetworkInterfaceIds']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# DisassociateNetworkInterfaceSecurityGroups返回参数结构体
class DisassociateNetworkInterfaceSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisassociateVpcEndPointSecurityGroups请求参数结构体
class DisassociateVpcEndPointSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupIds: 安全组ID数组。
# @type SecurityGroupIds: Array
# @param EndPointId: 终端节点ID。
# @type EndPointId: String
attr_accessor :SecurityGroupIds, :EndPointId
def initialize(securitygroupids=nil, endpointid=nil)
@SecurityGroupIds = securitygroupids
@EndPointId = endpointid
end
def deserialize(params)
@SecurityGroupIds = params['SecurityGroupIds']
@EndPointId = params['EndPointId']
end
end
# DisassociateVpcEndPointSecurityGroups返回参数结构体
class DisassociateVpcEndPointSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DownloadCustomerGatewayConfiguration请求参数结构体
class DownloadCustomerGatewayConfigurationRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param VpnConnectionId: VPN通道实例ID。形如：vpnx-f49l6u0z。
# @type VpnConnectionId: String
# @param CustomerGatewayVendor: 对端网关厂商信息对象，可通过DescribeCustomerGatewayVendors获取。
# @type CustomerGatewayVendor: :class:`Tencentcloud::Vpc.v20170312.models.CustomerGatewayVendor`
# @param InterfaceName: 通道接入设备物理接口名称。
# @type InterfaceName: String
attr_accessor :VpnGatewayId, :VpnConnectionId, :CustomerGatewayVendor, :InterfaceName
def initialize(vpngatewayid=nil, vpnconnectionid=nil, customergatewayvendor=nil, interfacename=nil)
@VpnGatewayId = vpngatewayid
@VpnConnectionId = vpnconnectionid
@CustomerGatewayVendor = customergatewayvendor
@InterfaceName = interfacename
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@VpnConnectionId = params['VpnConnectionId']
unless params['CustomerGatewayVendor'].nil?
@CustomerGatewayVendor = CustomerGatewayVendor.new
@CustomerGatewayVendor.deserialize(params['CustomerGatewayVendor'])
end
@InterfaceName = params['InterfaceName']
end
end
# DownloadCustomerGatewayConfiguration返回参数结构体
class DownloadCustomerGatewayConfigurationResponse < TencentCloud::Common::AbstractModel
# @param CustomerGatewayConfiguration: XML格式配置信息。
# @type CustomerGatewayConfiguration: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CustomerGatewayConfiguration, :RequestId
def initialize(customergatewayconfiguration=nil, requestid=nil)
@CustomerGatewayConfiguration = customergatewayconfiguration
@RequestId = requestid
end
def deserialize(params)
@CustomerGatewayConfiguration = params['CustomerGatewayConfiguration']
@RequestId = params['RequestId']
end
end
# EnableCcnRoutes请求参数结构体
class EnableCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param RouteIds: CCN路由策略唯一ID。形如：ccnr-f49l6u0z。
# @type RouteIds: Array
attr_accessor :CcnId, :RouteIds
def initialize(ccnid=nil, routeids=nil)
@CcnId = ccnid
@RouteIds = routeids
end
def deserialize(params)
@CcnId = params['CcnId']
@RouteIds = params['RouteIds']
end
end
# EnableCcnRoutes返回参数结构体
class EnableCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableGatewayFlowMonitor请求参数结构体
class EnableGatewayFlowMonitorRequest < TencentCloud::Common::AbstractModel
# @param GatewayId: 网关实例ID，目前我们支持的网关实例有，
# 专线网关实例ID，形如，`dcg-ltjahce6`；
# Nat网关实例ID，形如，`nat-ltjahce6`；
# VPN网关实例ID，形如，`vpn-ltjahce6`。
# @type GatewayId: String
attr_accessor :GatewayId
def initialize(gatewayid=nil)
@GatewayId = gatewayid
end
def deserialize(params)
@GatewayId = params['GatewayId']
end
end
# EnableGatewayFlowMonitor返回参数结构体
class EnableGatewayFlowMonitorResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableRoutes请求参数结构体
class EnableRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表唯一ID。
# @type RouteTableId: String
# @param RouteIds: 路由策略ID。不能和RouteItemIds同时使用，但至少输入一个。该参数取值可通过查询路由列表（[DescribeRouteTables](https://cloud.tencent.com/document/product/215/15763)）获取。
# @type RouteIds: Array
# @param RouteItemIds: 路由策略唯一ID。不能和RouteIds同时使用，但至少输入一个。该参数取值可通过查询路由列表（[DescribeRouteTables](https://cloud.tencent.com/document/product/215/15763)）获取。
# @type RouteItemIds: Array
attr_accessor :RouteTableId, :RouteIds, :RouteItemIds
def initialize(routetableid=nil, routeids=nil, routeitemids=nil)
@RouteTableId = routetableid
@RouteIds = routeids
@RouteItemIds = routeitemids
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteIds = params['RouteIds']
@RouteItemIds = params['RouteItemIds']
end
end
# EnableRoutes返回参数结构体
class EnableRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableVpcEndPointConnect请求参数结构体
class EnableVpcEndPointConnectRequest < TencentCloud::Common::AbstractModel
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
# @param EndPointId: 终端节点ID。
# @type EndPointId: Array
# @param AcceptFlag: 是否接受终端节点连接请求。
# @type AcceptFlag: Boolean
attr_accessor :EndPointServiceId, :EndPointId, :AcceptFlag
def initialize(endpointserviceid=nil, endpointid=nil, acceptflag=nil)
@EndPointServiceId = endpointserviceid
@EndPointId = endpointid
@AcceptFlag = acceptflag
end
def deserialize(params)
@EndPointServiceId = params['EndPointServiceId']
@EndPointId = params['EndPointId']
@AcceptFlag = params['AcceptFlag']
end
end
# EnableVpcEndPointConnect返回参数结构体
class EnableVpcEndPointConnectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 终端节点详情。
class EndPoint < TencentCloud::Common::AbstractModel
# @param EndPointId: 终端节点ID。
# @type EndPointId: String
# @param VpcId: VPCID。
# @type VpcId: String
# @param SubnetId: 子网ID。
# @type SubnetId: String
# @param EndPointOwner: APPID。
# @type EndPointOwner: String
# @param EndPointName: 终端节点名称。
# @type EndPointName: String
# @param ServiceVpcId: 终端节点服务的VPCID。
# @type ServiceVpcId: String
# @param ServiceVip: 终端节点服务的VIP。
# @type ServiceVip: String
# @param EndPointServiceId: 终端节点服务的ID。
# @type EndPointServiceId: String
# @param EndPointVip: 终端节点的VIP。
# @type EndPointVip: String
# @param State: 终端节点状态，ACTIVE：可用，PENDING：待接受，ACCEPTING：接受中，REJECTED：已拒绝，FAILED：失败。
# @type State: String
# @param CreateTime: 创建时间。
# @type CreateTime: String
# @param GroupSet: 终端节点绑定的安全组实例ID列表。
# @type GroupSet: Array
# @param ServiceName: 终端节点服务名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceName: String
attr_accessor :EndPointId, :VpcId, :SubnetId, :EndPointOwner, :EndPointName, :ServiceVpcId, :ServiceVip, :EndPointServiceId, :EndPointVip, :State, :CreateTime, :GroupSet, :ServiceName
def initialize(endpointid=nil, vpcid=nil, subnetid=nil, endpointowner=nil, endpointname=nil, servicevpcid=nil, servicevip=nil, endpointserviceid=nil, endpointvip=nil, state=nil, createtime=nil, groupset=nil, servicename=nil)
@EndPointId = endpointid
@VpcId = vpcid
@SubnetId = subnetid
@EndPointOwner = endpointowner
@EndPointName = endpointname
@ServiceVpcId = servicevpcid
@ServiceVip = servicevip
@EndPointServiceId = endpointserviceid
@EndPointVip = endpointvip
@State = state
@CreateTime = createtime
@GroupSet = groupset
@ServiceName = servicename
end
def deserialize(params)
@EndPointId = params['EndPointId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@EndPointOwner = params['EndPointOwner']
@EndPointName = params['EndPointName']
@ServiceVpcId = params['ServiceVpcId']
@ServiceVip = params['ServiceVip']
@EndPointServiceId = params['EndPointServiceId']
@EndPointVip = params['EndPointVip']
@State = params['State']
@CreateTime = params['CreateTime']
@GroupSet = params['GroupSet']
@ServiceName = params['ServiceName']
end
end
# 终端节点服务对象。
class EndPointService < TencentCloud::Common::AbstractModel
# @param EndPointServiceId: 终端节点服务ID
# @type EndPointServiceId: String
# @param VpcId: VPCID。
# @type VpcId: String
# @param ServiceOwner: APPID。
# @type ServiceOwner: String
# @param ServiceName: 终端节点服务名称。
# @type ServiceName: String
# @param ServiceVip: 后端服务的VIP。
# @type ServiceVip: String
# @param ServiceInstanceId: 后端服务的ID，比如lb-xxx。
# @type ServiceInstanceId: String
# @param AutoAcceptFlag: 是否自动接受。
# @type AutoAcceptFlag: Boolean
# @param EndPointCount: 关联的终端节点个数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndPointCount: Integer
# @param EndPointSet: 终端节点对象数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndPointSet: Array
# @param CreateTime: 创建时间。
# @type CreateTime: String
attr_accessor :EndPointServiceId, :VpcId, :ServiceOwner, :ServiceName, :ServiceVip, :ServiceInstanceId, :AutoAcceptFlag, :EndPointCount, :EndPointSet, :CreateTime
def initialize(endpointserviceid=nil, vpcid=nil, serviceowner=nil, servicename=nil, servicevip=nil, serviceinstanceid=nil, autoacceptflag=nil, endpointcount=nil, endpointset=nil, createtime=nil)
@EndPointServiceId = endpointserviceid
@VpcId = vpcid
@ServiceOwner = serviceowner
@ServiceName = servicename
@ServiceVip = servicevip
@ServiceInstanceId = serviceinstanceid
@AutoAcceptFlag = autoacceptflag
@EndPointCount = endpointcount
@EndPointSet = endpointset
@CreateTime = createtime
end
def deserialize(params)
@EndPointServiceId = params['EndPointServiceId']
@VpcId = params['VpcId']
@ServiceOwner = params['ServiceOwner']
@ServiceName = params['ServiceName']
@ServiceVip = params['ServiceVip']
@ServiceInstanceId = params['ServiceInstanceId']
@AutoAcceptFlag = params['AutoAcceptFlag']
@EndPointCount = params['EndPointCount']
unless params['EndPointSet'].nil?
@EndPointSet = []
params['EndPointSet'].each do |i|
endpoint_tmp = EndPoint.new
endpoint_tmp.deserialize(i)
@EndPointSet << endpoint_tmp
end
end
@CreateTime = params['CreateTime']
end
end
# 过滤器
class Filter < TencentCloud::Common::AbstractModel
# @param Name: 属性名称, 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Name: String
# @param Values: 属性值, 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@Name = name
@Values = values
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
end
end
# 过滤器键值对
class FilterObject < TencentCloud::Common::AbstractModel
# @param Name: 属性名称, 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Name: String
# @param Values: 属性值, 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@Name = name
@Values = values
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
end
end
# 流日志
class FlowLog < TencentCloud::Common::AbstractModel
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID。
# @type VpcId: String
# @param FlowLogId: 流日志唯一ID。
# @type FlowLogId: String
# @param FlowLogName: 流日志实例名字。
# @type FlowLogName: String
# @param ResourceType: 流日志所属资源类型，VPC|SUBNET|NETWORKINTERFACE|CCN。
# @type ResourceType: String
# @param ResourceId: 资源唯一ID。
# @type ResourceId: String
# @param TrafficType: 流日志采集类型，ACCEPT|REJECT|ALL。
# @type TrafficType: String
# @param CloudLogId: 流日志存储ID。
# @type CloudLogId: String
# @param CloudLogState: 流日志存储ID状态。
# @type CloudLogState: String
# @param FlowLogDescription: 流日志描述信息。
# @type FlowLogDescription: String
# @param CreatedTime: 流日志创建时间。
# @type CreatedTime: String
# @param TagSet: 标签列表，例如：[{"Key": "city", "Value": "shanghai"}]。
# @type TagSet: Array
# @param Enable: 是否启用，true-启用，false-停用。
# @type Enable: Boolean
# @param StorageType: 消费端类型：cls、ckafka。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageType: String
# @param FlowLogStorage: 消费端信息，当消费端类型为ckafka时返回
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FlowLogStorage: :class:`Tencentcloud::Vpc.v20170312.models.FlowLogStorage`
attr_accessor :VpcId, :FlowLogId, :FlowLogName, :ResourceType, :ResourceId, :TrafficType, :CloudLogId, :CloudLogState, :FlowLogDescription, :CreatedTime, :TagSet, :Enable, :StorageType, :FlowLogStorage
def initialize(vpcid=nil, flowlogid=nil, flowlogname=nil, resourcetype=nil, resourceid=nil, traffictype=nil, cloudlogid=nil, cloudlogstate=nil, flowlogdescription=nil, createdtime=nil, tagset=nil, enable=nil, storagetype=nil, flowlogstorage=nil)
@VpcId = vpcid
@FlowLogId = flowlogid
@FlowLogName = flowlogname
@ResourceType = resourcetype
@ResourceId = resourceid
@TrafficType = traffictype
@CloudLogId = cloudlogid
@CloudLogState = cloudlogstate
@FlowLogDescription = flowlogdescription
@CreatedTime = createdtime
@TagSet = tagset
@Enable = enable
@StorageType = storagetype
@FlowLogStorage = flowlogstorage
end
def deserialize(params)
@VpcId = params['VpcId']
@FlowLogId = params['FlowLogId']
@FlowLogName = params['FlowLogName']
@ResourceType = params['ResourceType']
@ResourceId = params['ResourceId']
@TrafficType = params['TrafficType']
@CloudLogId = params['CloudLogId']
@CloudLogState = params['CloudLogState']
@FlowLogDescription = params['FlowLogDescription']
@CreatedTime = params['CreatedTime']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@Enable = params['Enable']
@StorageType = params['StorageType']
unless params['FlowLogStorage'].nil?
@FlowLogStorage = FlowLogStorage.new
@FlowLogStorage.deserialize(params['FlowLogStorage'])
end
end
end
# 流日志存储信息
class FlowLogStorage < TencentCloud::Common::AbstractModel
# @param StorageId: 存储实例Id，当流日志存储类型为ckafka时，必填。
# @type StorageId: String
# @param StorageTopic: 主题Id，当流日志存储类型为ckafka时，必填。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageTopic: String
attr_accessor :StorageId, :StorageTopic
def initialize(storageid=nil, storagetopic=nil)
@StorageId = storageid
@StorageTopic = storagetopic
end
def deserialize(params)
@StorageId = params['StorageId']
@StorageTopic = params['StorageTopic']
end
end
# 网关流量监控明细
class GatewayFlowMonitorDetail < TencentCloud::Common::AbstractModel
# @param PrivateIpAddress: 来源`IP`。
# @type PrivateIpAddress: String
# @param InPkg: 入包量。
# @type InPkg: Integer
# @param OutPkg: 出包量。
# @type OutPkg: Integer
# @param InTraffic: 入流量，单位：`Byte`。
# @type InTraffic: Integer
# @param OutTraffic: 出流量，单位：`Byte`。
# @type OutTraffic: Integer
attr_accessor :PrivateIpAddress, :InPkg, :OutPkg, :InTraffic, :OutTraffic
def initialize(privateipaddress=nil, inpkg=nil, outpkg=nil, intraffic=nil, outtraffic=nil)
@PrivateIpAddress = privateipaddress
@InPkg = inpkg
@OutPkg = outpkg
@InTraffic = intraffic
@OutTraffic = outtraffic
end
def deserialize(params)
@PrivateIpAddress = params['PrivateIpAddress']
@InPkg = params['InPkg']
@OutPkg = params['OutPkg']
@InTraffic = params['InTraffic']
@OutTraffic = params['OutTraffic']
end
end
# 网关流控带宽信息
class GatewayQos < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param IpAddress: 云服务器内网IP。
# @type IpAddress: String
# @param Bandwidth: 流控带宽值。
# @type Bandwidth: Integer
# @param CreateTime: 创建时间。
# @type CreateTime: String
attr_accessor :VpcId, :IpAddress, :Bandwidth, :CreateTime
def initialize(vpcid=nil, ipaddress=nil, bandwidth=nil, createtime=nil)
@VpcId = vpcid
@IpAddress = ipaddress
@Bandwidth = bandwidth
@CreateTime = createtime
end
def deserialize(params)
@VpcId = params['VpcId']
@IpAddress = params['IpAddress']
@Bandwidth = params['Bandwidth']
@CreateTime = params['CreateTime']
end
end
# GetCcnRegionBandwidthLimits请求参数结构体
class GetCcnRegionBandwidthLimitsRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Filters: 过滤条件。
# sregion - String - （过滤条件）源地域，形如：ap-guangzhou。
# dregion - String - （过滤条件）目的地域，形如：ap-shanghai-bm
# @type Filters: Array
# @param SortedBy: 排序条件，目前支持带宽（BandwidthLimit）和过期时间（ExpireTime）
# @type SortedBy: String
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 返回数量
# @type Limit: Integer
# @param OrderBy: 排序方式，'ASC':升序,'DESC':降序。
# @type OrderBy: String
attr_accessor :CcnId, :Filters, :SortedBy, :Offset, :Limit, :OrderBy
def initialize(ccnid=nil, filters=nil, sortedby=nil, offset=nil, limit=nil, orderby=nil)
@CcnId = ccnid
@Filters = filters
@SortedBy = sortedby
@Offset = offset
@Limit = limit
@OrderBy = orderby
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@SortedBy = params['SortedBy']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderBy = params['OrderBy']
end
end
# GetCcnRegionBandwidthLimits返回参数结构体
class GetCcnRegionBandwidthLimitsResponse < TencentCloud::Common::AbstractModel
# @param CcnBandwidthSet: 云联网（CCN）各地域出带宽带宽详情。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CcnBandwidthSet: Array
# @param TotalCount: 符合条件的对象数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CcnBandwidthSet, :TotalCount, :RequestId
def initialize(ccnbandwidthset=nil, totalcount=nil, requestid=nil)
@CcnBandwidthSet = ccnbandwidthset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['CcnBandwidthSet'].nil?
@CcnBandwidthSet = []
params['CcnBandwidthSet'].each do |i|
ccnbandwidthinfo_tmp = CcnBandwidthInfo.new
ccnbandwidthinfo_tmp.deserialize(i)
@CcnBandwidthSet << ccnbandwidthinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# 描述 HAVIP 信息
class HaVip < TencentCloud::Common::AbstractModel
# @param HaVipId: `HAVIP`的`ID`，是`HAVIP`的唯一标识。
# @type HaVipId: String
# @param HaVipName: `HAVIP`名称。
# @type HaVipName: String
# @param Vip: 虚拟IP地址。
# @type Vip: String
# @param VpcId: `HAVIP`所在私有网络`ID`。
# @type VpcId: String
# @param SubnetId: `HAVIP`所在子网`ID`。
# @type SubnetId: String
# @param NetworkInterfaceId: `HAVIP`关联弹性网卡`ID`。
# @type NetworkInterfaceId: String
# @param InstanceId: 被绑定的实例`ID`。
# @type InstanceId: String
# @param AddressIp: 绑定`EIP`。
# @type AddressIp: String
# @param State: 状态：
# `AVAILABLE`：运行中
# `UNBIND`：未绑定
# @type State: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param Business: 使用havip的业务标识。
# @type Business: String
attr_accessor :HaVipId, :HaVipName, :Vip, :VpcId, :SubnetId, :NetworkInterfaceId, :InstanceId, :AddressIp, :State, :CreatedTime, :Business
def initialize(havipid=nil, havipname=nil, vip=nil, vpcid=nil, subnetid=nil, networkinterfaceid=nil, instanceid=nil, addressip=nil, state=nil, createdtime=nil, business=nil)
@HaVipId = havipid
@HaVipName = havipname
@Vip = vip
@VpcId = vpcid
@SubnetId = subnetid
@NetworkInterfaceId = networkinterfaceid
@InstanceId = instanceid
@AddressIp = addressip
@State = state
@CreatedTime = createdtime
@Business = business
end
def deserialize(params)
@HaVipId = params['HaVipId']
@HaVipName = params['HaVipName']
@Vip = params['Vip']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@NetworkInterfaceId = params['NetworkInterfaceId']
@InstanceId = params['InstanceId']
@AddressIp = params['AddressIp']
@State = params['State']
@CreatedTime = params['CreatedTime']
@Business = params['Business']
end
end
# HaVipAssociateAddressIp请求参数结构体
class HaVipAssociateAddressIpRequest < TencentCloud::Common::AbstractModel
# @param HaVipId: `HAVIP`唯一`ID`，形如：`havip-9o233uri`。必须是没有绑定`EIP`的`HAVIP`
# @type HaVipId: String
# @param AddressIp: 弹性公网`IP`。必须是没有绑定`HAVIP`的`EIP`
# @type AddressIp: String
attr_accessor :HaVipId, :AddressIp
def initialize(havipid=nil, addressip=nil)
@HaVipId = havipid
@AddressIp = addressip
end
def deserialize(params)
@HaVipId = params['HaVipId']
@AddressIp = params['AddressIp']
end
end
# HaVipAssociateAddressIp返回参数结构体
class HaVipAssociateAddressIpResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# HaVipDisassociateAddressIp请求参数结构体
class HaVipDisassociateAddressIpRequest < TencentCloud::Common::AbstractModel
# @param HaVipId: `HAVIP`唯一`ID`，形如：`havip-9o233uri`。必须是已绑定`EIP`的`HAVIP`。
# @type HaVipId: String
attr_accessor :HaVipId
def initialize(havipid=nil)
@HaVipId = havipid
end
def deserialize(params)
@HaVipId = params['HaVipId']
end
end
# HaVipDisassociateAddressIp返回参数结构体
class HaVipDisassociateAddressIpResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# IKE配置（Internet Key Exchange，因特网密钥交换），IKE具有一套自我保护机制，用户配置网络安全协议
class IKEOptionsSpecification < TencentCloud::Common::AbstractModel
# @param PropoEncryAlgorithm: 加密算法，可选值：'3DES-CBC', 'AES-CBC-128', 'AES-CBS-192', 'AES-CBC-256', 'DES-CBC'，'SM4', 默认为3DES-CBC
# @type PropoEncryAlgorithm: String
# @param PropoAuthenAlgorithm: 认证算法：可选值：'MD5', 'SHA1'，'SHA-256' 默认为MD5
# @type PropoAuthenAlgorithm: String
# @param ExchangeMode: 协商模式：可选值：'AGGRESSIVE', 'MAIN'，默认为MAIN
# @type ExchangeMode: String
# @param LocalIdentity: 本端标识类型：可选值：'ADDRESS', 'FQDN'，默认为ADDRESS
# @type LocalIdentity: String
# @param RemoteIdentity: 对端标识类型：可选值：'ADDRESS', 'FQDN'，默认为ADDRESS
# @type RemoteIdentity: String
# @param LocalAddress: 本端标识，当LocalIdentity选为ADDRESS时，LocalAddress必填。localAddress默认为vpn网关公网IP
# @type LocalAddress: String
# @param RemoteAddress: 对端标识，当RemoteIdentity选为ADDRESS时，RemoteAddress必填
# @type RemoteAddress: String
# @param LocalFqdnName: 本端标识，当LocalIdentity选为FQDN时，LocalFqdnName必填
# @type LocalFqdnName: String
# @param RemoteFqdnName: 对端标识，当remoteIdentity选为FQDN时，RemoteFqdnName必填
# @type RemoteFqdnName: String
# @param DhGroupName: DH group，指定IKE交换密钥时使用的DH组，可选值：'GROUP1', 'GROUP2', 'GROUP5', 'GROUP14', 'GROUP24'，
# @type DhGroupName: String
# @param IKESaLifetimeSeconds: IKE SA Lifetime，单位：秒，设置IKE SA的生存周期，取值范围：60-604800
# @type IKESaLifetimeSeconds: Integer
# @param IKEVersion: IKE版本
# @type IKEVersion: String
attr_accessor :PropoEncryAlgorithm, :PropoAuthenAlgorithm, :ExchangeMode, :LocalIdentity, :RemoteIdentity, :LocalAddress, :RemoteAddress, :LocalFqdnName, :RemoteFqdnName, :DhGroupName, :IKESaLifetimeSeconds, :IKEVersion
def initialize(propoencryalgorithm=nil, propoauthenalgorithm=nil, exchangemode=nil, localidentity=nil, remoteidentity=nil, localaddress=nil, remoteaddress=nil, localfqdnname=nil, remotefqdnname=nil, dhgroupname=nil, ikesalifetimeseconds=nil, ikeversion=nil)
@PropoEncryAlgorithm = propoencryalgorithm
@PropoAuthenAlgorithm = propoauthenalgorithm
@ExchangeMode = exchangemode
@LocalIdentity = localidentity
@RemoteIdentity = remoteidentity
@LocalAddress = localaddress
@RemoteAddress = remoteaddress
@LocalFqdnName = localfqdnname
@RemoteFqdnName = remotefqdnname
@DhGroupName = dhgroupname
@IKESaLifetimeSeconds = ikesalifetimeseconds
@IKEVersion = ikeversion
end
def deserialize(params)
@PropoEncryAlgorithm = params['PropoEncryAlgorithm']
@PropoAuthenAlgorithm = params['PropoAuthenAlgorithm']
@ExchangeMode = params['ExchangeMode']
@LocalIdentity = params['LocalIdentity']
@RemoteIdentity = params['RemoteIdentity']
@LocalAddress = params['LocalAddress']
@RemoteAddress = params['RemoteAddress']
@LocalFqdnName = params['LocalFqdnName']
@RemoteFqdnName = params['RemoteFqdnName']
@DhGroupName = params['DhGroupName']
@IKESaLifetimeSeconds = params['IKESaLifetimeSeconds']
@IKEVersion = params['IKEVersion']
end
end
# IPSec配置，腾讯云提供IPSec安全会话设置
class IPSECOptionsSpecification < TencentCloud::Common::AbstractModel
# @param EncryptAlgorithm: 加密算法，可选值：'3DES-CBC', 'AES-CBC-128', 'AES-CBC-192', 'AES-CBC-256', 'DES-CBC', 'SM4', 'NULL'， 默认为AES-CBC-128
# @type EncryptAlgorithm: String
# @param IntegrityAlgorith: 认证算法：可选值：'MD5', 'SHA1'，'SHA-256' 默认为
# @type IntegrityAlgorith: String
# @param IPSECSaLifetimeSeconds: IPsec SA lifetime(s)：单位秒，取值范围：180-604800
# @type IPSECSaLifetimeSeconds: Integer
# @param PfsDhGroup: PFS：可选值：'NULL', 'DH-GROUP1', 'DH-GROUP2', 'DH-GROUP5', 'DH-GROUP14', 'DH-GROUP24'，默认为NULL
# @type PfsDhGroup: String
# @param IPSECSaLifetimeTraffic: IPsec SA lifetime(KB)：单位KB，取值范围：2560-604800
# @type IPSECSaLifetimeTraffic: Integer
attr_accessor :EncryptAlgorithm, :IntegrityAlgorith, :IPSECSaLifetimeSeconds, :PfsDhGroup, :IPSECSaLifetimeTraffic
def initialize(encryptalgorithm=nil, integrityalgorith=nil, ipsecsalifetimeseconds=nil, pfsdhgroup=nil, ipsecsalifetimetraffic=nil)
@EncryptAlgorithm = encryptalgorithm
@IntegrityAlgorith = integrityalgorith
@IPSECSaLifetimeSeconds = ipsecsalifetimeseconds
@PfsDhGroup = pfsdhgroup
@IPSECSaLifetimeTraffic = ipsecsalifetimetraffic
end
def deserialize(params)
@EncryptAlgorithm = params['EncryptAlgorithm']
@IntegrityAlgorith = params['IntegrityAlgorith']
@IPSECSaLifetimeSeconds = params['IPSECSaLifetimeSeconds']
@PfsDhGroup = params['PfsDhGroup']
@IPSECSaLifetimeTraffic = params['IPSECSaLifetimeTraffic']
end
end
# InquirePriceCreateDirectConnectGateway请求参数结构体
class InquirePriceCreateDirectConnectGatewayRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# InquirePriceCreateDirectConnectGateway返回参数结构体
class InquirePriceCreateDirectConnectGatewayResponse < TencentCloud::Common::AbstractModel
# @param TotalCost: 专线网关标准接入费用
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCost: Integer
# @param RealTotalCost: 专线网关真实接入费用
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealTotalCost: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCost, :RealTotalCost, :RequestId
def initialize(totalcost=nil, realtotalcost=nil, requestid=nil)
@TotalCost = totalcost
@RealTotalCost = realtotalcost
@RequestId = requestid
end
def deserialize(params)
@TotalCost = params['TotalCost']
@RealTotalCost = params['RealTotalCost']
@RequestId = params['RequestId']
end
end
# InquiryPriceCreateVpnGateway请求参数结构体
class InquiryPriceCreateVpnGatewayRequest < TencentCloud::Common::AbstractModel
# @param InternetMaxBandwidthOut: 公网带宽设置。可选带宽规格：5, 10, 20, 50, 100；单位：Mbps。
# @type InternetMaxBandwidthOut: Integer
# @param InstanceChargeType: VPN网关计费模式，PREPAID：表示预付费，即包年包月，POSTPAID_BY_HOUR：表示后付费，即按量计费。默认：POSTPAID_BY_HOUR，如果指定预付费模式，参数InstanceChargePrepaid必填。
# @type InstanceChargeType: String
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.InstanceChargePrepaid`
attr_accessor :InternetMaxBandwidthOut, :InstanceChargeType, :InstanceChargePrepaid
def initialize(internetmaxbandwidthout=nil, instancechargetype=nil, instancechargeprepaid=nil)
@InternetMaxBandwidthOut = internetmaxbandwidthout
@InstanceChargeType = instancechargetype
@InstanceChargePrepaid = instancechargeprepaid
end
def deserialize(params)
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@InstanceChargeType = params['InstanceChargeType']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
end
end
# InquiryPriceCreateVpnGateway返回参数结构体
class InquiryPriceCreateVpnGatewayResponse < TencentCloud::Common::AbstractModel
# @param Price: 商品价格。
# @type Price: :class:`Tencentcloud::Vpc.v20170312.models.Price`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Price, :RequestId
def initialize(price=nil, requestid=nil)
@Price = price
@RequestId = requestid
end
def deserialize(params)
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
@RequestId = params['RequestId']
end
end
# InquiryPriceRenewVpnGateway请求参数结构体
class InquiryPriceRenewVpnGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.InstanceChargePrepaid`
attr_accessor :VpnGatewayId, :InstanceChargePrepaid
def initialize(vpngatewayid=nil, instancechargeprepaid=nil)
@VpnGatewayId = vpngatewayid
@InstanceChargePrepaid = instancechargeprepaid
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
end
end
# InquiryPriceRenewVpnGateway返回参数结构体
class InquiryPriceRenewVpnGatewayResponse < TencentCloud::Common::AbstractModel
# @param Price: 商品价格。
# @type Price: :class:`Tencentcloud::Vpc.v20170312.models.Price`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Price, :RequestId
def initialize(price=nil, requestid=nil)
@Price = price
@RequestId = requestid
end
def deserialize(params)
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
@RequestId = params['RequestId']
end
end
# InquiryPriceResetVpnGatewayInternetMaxBandwidth请求参数结构体
class InquiryPriceResetVpnGatewayInternetMaxBandwidthRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param InternetMaxBandwidthOut: 公网带宽设置。可选带宽规格：5, 10, 20, 50, 100；单位：Mbps。
# @type InternetMaxBandwidthOut: Integer
attr_accessor :VpnGatewayId, :InternetMaxBandwidthOut
def initialize(vpngatewayid=nil, internetmaxbandwidthout=nil)
@VpnGatewayId = vpngatewayid
@InternetMaxBandwidthOut = internetmaxbandwidthout
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
end
end
# InquiryPriceResetVpnGatewayInternetMaxBandwidth返回参数结构体
class InquiryPriceResetVpnGatewayInternetMaxBandwidthResponse < TencentCloud::Common::AbstractModel
# @param Price: 商品价格。
# @type Price: :class:`Tencentcloud::Vpc.v20170312.models.Price`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Price, :RequestId
def initialize(price=nil, requestid=nil)
@Price = price
@RequestId = requestid
end
def deserialize(params)
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
@RequestId = params['RequestId']
end
end
# 预付费（包年包月）计费对象。
class InstanceChargePrepaid < TencentCloud::Common::AbstractModel
# @param Period: 购买实例的时长，单位：月。取值范围：1, 2, 3, 4, 5, 6, 7, 8, 9, 12, 24, 36。
# @type Period: Integer
# @param RenewFlag: 自动续费标识。取值范围： NOTIFY_AND_AUTO_RENEW：通知过期且自动续费， NOTIFY_AND_MANUAL_RENEW：通知过期不自动续费。默认：NOTIFY_AND_MANUAL_RENEW
# @type RenewFlag: String
attr_accessor :Period, :RenewFlag
def initialize(period=nil, renewflag=nil)
@Period = period
@RenewFlag = renewflag
end
def deserialize(params)
@Period = params['Period']
@RenewFlag = params['RenewFlag']
end
end
# 用于描述实例的统计信息
class InstanceStatistic < TencentCloud::Common::AbstractModel
# @param InstanceType: 实例的类型
# @type InstanceType: String
# @param InstanceCount: 实例的个数
# @type InstanceCount: Integer
attr_accessor :InstanceType, :InstanceCount
def initialize(instancetype=nil, instancecount=nil)
@InstanceType = instancetype
@InstanceCount = instancecount
end
def deserialize(params)
@InstanceType = params['InstanceType']
@InstanceCount = params['InstanceCount']
end
end
# IPV6转换规则
class Ip6Rule < TencentCloud::Common::AbstractModel
# @param Ip6RuleId: IPV6转换规则唯一ID，形如rule6-xxxxxxxx
# @type Ip6RuleId: String
# @param Ip6RuleName: IPV6转换规则名称
# @type Ip6RuleName: String
# @param Vip6: IPV6地址
# @type Vip6: String
# @param Vport6: IPV6端口号
# @type Vport6: Integer
# @param Protocol: 协议类型，支持TCP/UDP
# @type Protocol: String
# @param Vip: IPV4地址
# @type Vip: String
# @param Vport: IPV4端口号
# @type Vport: Integer
# @param RuleStatus: 转换规则状态，限于CREATING,RUNNING,DELETING,MODIFYING
# @type RuleStatus: String
# @param CreatedTime: 转换规则创建时间
# @type CreatedTime: String
attr_accessor :Ip6RuleId, :Ip6RuleName, :Vip6, :Vport6, :Protocol, :Vip, :Vport, :RuleStatus, :CreatedTime
def initialize(ip6ruleid=nil, ip6rulename=nil, vip6=nil, vport6=nil, protocol=nil, vip=nil, vport=nil, rulestatus=nil, createdtime=nil)
@Ip6RuleId = ip6ruleid
@Ip6RuleName = ip6rulename
@Vip6 = vip6
@Vport6 = vport6
@Protocol = protocol
@Vip = vip
@Vport = vport
@RuleStatus = rulestatus
@CreatedTime = createdtime
end
def deserialize(params)
@Ip6RuleId = params['Ip6RuleId']
@Ip6RuleName = params['Ip6RuleName']
@Vip6 = params['Vip6']
@Vport6 = params['Vport6']
@Protocol = params['Protocol']
@Vip = params['Vip']
@Vport = params['Vport']
@RuleStatus = params['RuleStatus']
@CreatedTime = params['CreatedTime']
end
end
# IPV6转换规则
class Ip6RuleInfo < TencentCloud::Common::AbstractModel
# @param Vport6: IPV6端口号，可在0~65535范围取值
# @type Vport6: Integer
# @param Protocol: 协议类型，支持TCP/UDP
# @type Protocol: String
# @param Vip: IPV4地址
# @type Vip: String
# @param Vport: IPV4端口号，可在0~65535范围取值
# @type Vport: Integer
attr_accessor :Vport6, :Protocol, :Vip, :Vport
def initialize(vport6=nil, protocol=nil, vip=nil, vport=nil)
@Vport6 = vport6
@Protocol = protocol
@Vip = vip
@Vport = vport
end
def deserialize(params)
@Vport6 = params['Vport6']
@Protocol = params['Protocol']
@Vip = params['Vip']
@Vport = params['Vport']
end
end
# IPV6转换实例信息
class Ip6Translator < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorId: IPV6转换实例唯一ID，形如ip6-xxxxxxxx
# @type Ip6TranslatorId: String
# @param Ip6TranslatorName: IPV6转换实例名称
# @type Ip6TranslatorName: String
# @param Vip6: IPV6地址
# @type Vip6: String
# @param IspName: IPV6转换地址所属运营商
# @type IspName: String
# @param TranslatorStatus: 转换实例状态，限于CREATING,RUNNING,DELETING,MODIFYING
# @type TranslatorStatus: String
# @param CreatedTime: IPV6转换实例创建时间
# @type CreatedTime: String
# @param Ip6RuleCount: 绑定的IPV6转换规则数量
# @type Ip6RuleCount: Integer
# @param IP6RuleSet: IPV6转换规则信息
# @type IP6RuleSet: Array
attr_accessor :Ip6TranslatorId, :Ip6TranslatorName, :Vip6, :IspName, :TranslatorStatus, :CreatedTime, :Ip6RuleCount, :IP6RuleSet
def initialize(ip6translatorid=nil, ip6translatorname=nil, vip6=nil, ispname=nil, translatorstatus=nil, createdtime=nil, ip6rulecount=nil, ip6ruleset=nil)
@Ip6TranslatorId = ip6translatorid
@Ip6TranslatorName = ip6translatorname
@Vip6 = vip6
@IspName = ispname
@TranslatorStatus = translatorstatus
@CreatedTime = createdtime
@Ip6RuleCount = ip6rulecount
@IP6RuleSet = ip6ruleset
end
def deserialize(params)
@Ip6TranslatorId = params['Ip6TranslatorId']
@Ip6TranslatorName = params['Ip6TranslatorName']
@Vip6 = params['Vip6']
@IspName = params['IspName']
@TranslatorStatus = params['TranslatorStatus']
@CreatedTime = params['CreatedTime']
@Ip6RuleCount = params['Ip6RuleCount']
unless params['IP6RuleSet'].nil?
@IP6RuleSet = []
params['IP6RuleSet'].each do |i|
ip6rule_tmp = Ip6Rule.new
ip6rule_tmp.deserialize(i)
@IP6RuleSet << ip6rule_tmp
end
end
end
end
# IP在线查询的字段信息
class IpField < TencentCloud::Common::AbstractModel
# @param Country: 国家字段信息
# @type Country: Boolean
# @param Province: 省、州、郡一级行政区域字段信息
# @type Province: Boolean
# @param City: 市一级行政区域字段信息
# @type City: Boolean
# @param Region: 市内区域字段信息
# @type Region: Boolean
# @param Isp: 接入运营商字段信息
# @type Isp: Boolean
# @param AsName: 骨干运营商字段信息
# @type AsName: Boolean
# @param AsId: 骨干As号
# @type AsId: Boolean
# @param Comment: 注释字段
# @type Comment: Boolean
attr_accessor :Country, :Province, :City, :Region, :Isp, :AsName, :AsId, :Comment
def initialize(country=nil, province=nil, city=nil, region=nil, isp=nil, asname=nil, asid=nil, comment=nil)
@Country = country
@Province = province
@City = city
@Region = region
@Isp = isp
@AsName = asname
@AsId = asid
@Comment = comment
end
def deserialize(params)
@Country = params['Country']
@Province = params['Province']
@City = params['City']
@Region = params['Region']
@Isp = params['Isp']
@AsName = params['AsName']
@AsId = params['AsId']
@Comment = params['Comment']
end
end
# IP地理位置信息
class IpGeolocationInfo < TencentCloud::Common::AbstractModel
# @param Country: 国家信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Country: String
# @param Province: 省、州、郡一级行政区域信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Province: String
# @param City: 市一级行政区域信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type City: String
# @param Region: 市内区域信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param Isp: 接入运营商信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Isp: String
# @param AsName: 骨干运营商名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AsName: String
# @param AsId: 骨干运营商AS号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AsId: String
# @param Comment: 注释信息。目前的填充值为移动接入用户的APN值，如无APN属性则为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Comment: String
# @param AddressIp: IP地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AddressIp: String
attr_accessor :Country, :Province, :City, :Region, :Isp, :AsName, :AsId, :Comment, :AddressIp
def initialize(country=nil, province=nil, city=nil, region=nil, isp=nil, asname=nil, asid=nil, comment=nil, addressip=nil)
@Country = country
@Province = province
@City = city
@Region = region
@Isp = isp
@AsName = asname
@AsId = asid
@Comment = comment
@AddressIp = addressip
end
def deserialize(params)
@Country = params['Country']
@Province = params['Province']
@City = params['City']
@Region = params['Region']
@Isp = params['Isp']
@AsName = params['AsName']
@AsId = params['AsId']
@Comment = params['Comment']
@AddressIp = params['AddressIp']
end
end
# `IPv6`地址信息。
class Ipv6Address < TencentCloud::Common::AbstractModel
# @param Address: `IPv6`地址，形如：`3402:4e00:20:100:0:8cd9:2a67:71f3`
# @type Address: String
# @param Primary: 是否是主`IP`。
# @type Primary: Boolean
# @param AddressId: `EIP`实例`ID`，形如：`eip-hxlqja90`。
# @type AddressId: String
# @param Description: 描述信息。
# @type Description: String
# @param IsWanIpBlocked: 公网IP是否被封堵。
# @type IsWanIpBlocked: Boolean
# @param State: `IPv6`地址状态：
# `PENDING`：生产中
# `MIGRATING`：迁移中
# `DELETING`：删除中
# `AVAILABLE`：可用的
# @type State: String
attr_accessor :Address, :Primary, :AddressId, :Description, :IsWanIpBlocked, :State
def initialize(address=nil, primary=nil, addressid=nil, description=nil, iswanipblocked=nil, state=nil)
@Address = address
@Primary = primary
@AddressId = addressid
@Description = description
@IsWanIpBlocked = iswanipblocked
@State = state
end
def deserialize(params)
@Address = params['Address']
@Primary = params['Primary']
@AddressId = params['AddressId']
@Description = params['Description']
@IsWanIpBlocked = params['IsWanIpBlocked']
@State = params['State']
end
end
# IPv6子网段对象。
class Ipv6SubnetCidrBlock < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网实例`ID`。形如：`subnet-pxir56ns`。
# @type SubnetId: String
# @param Ipv6CidrBlock: `IPv6`子网段。形如：`3402:4e00:20:1001::/64`
# @type Ipv6CidrBlock: String
attr_accessor :SubnetId, :Ipv6CidrBlock
def initialize(subnetid=nil, ipv6cidrblock=nil)
@SubnetId = subnetid
@Ipv6CidrBlock = ipv6cidrblock
end
def deserialize(params)
@SubnetId = params['SubnetId']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
end
end
# 单项计费价格信息
class ItemPrice < TencentCloud::Common::AbstractModel
# @param UnitPrice: 按量计费后付费单价，单位：元。
# @type UnitPrice: Float
# @param ChargeUnit: 按量计费后付费计价单元，可取值范围： HOUR：表示计价单元是按每小时来计算。当前涉及该计价单元的场景有：实例按小时后付费（POSTPAID_BY_HOUR）、带宽按小时后付费（BANDWIDTH_POSTPAID_BY_HOUR）： GB：表示计价单元是按每GB来计算。当前涉及该计价单元的场景有：流量按小时后付费（TRAFFIC_POSTPAID_BY_HOUR）。
# @type ChargeUnit: String
# @param OriginalPrice: 预付费商品的原价，单位：元。
# @type OriginalPrice: Float
# @param DiscountPrice: 预付费商品的折扣价，单位：元。
# @type DiscountPrice: Float
attr_accessor :UnitPrice, :ChargeUnit, :OriginalPrice, :DiscountPrice
def initialize(unitprice=nil, chargeunit=nil, originalprice=nil, discountprice=nil)
@UnitPrice = unitprice
@ChargeUnit = chargeunit
@OriginalPrice = originalprice
@DiscountPrice = discountprice
end
def deserialize(params)
@UnitPrice = params['UnitPrice']
@ChargeUnit = params['ChargeUnit']
@OriginalPrice = params['OriginalPrice']
@DiscountPrice = params['DiscountPrice']
end
end
# 本地网关信息
class LocalGateway < TencentCloud::Common::AbstractModel
# @param CdcId: CDC实例ID
# @type CdcId: String
# @param VpcId: VPC实例ID
# @type VpcId: String
# @param UniqLocalGwId: 本地网关实例ID
# @type UniqLocalGwId: String
# @param LocalGatewayName: 本地网关名称
# @type LocalGatewayName: String
# @param LocalGwIp: 本地网关IP地址
# @type LocalGwIp: String
# @param CreateTime: 本地网关创建时间
# @type CreateTime: String
attr_accessor :CdcId, :VpcId, :UniqLocalGwId, :LocalGatewayName, :LocalGwIp, :CreateTime
def initialize(cdcid=nil, vpcid=nil, uniqlocalgwid=nil, localgatewayname=nil, localgwip=nil, createtime=nil)
@CdcId = cdcid
@VpcId = vpcid
@UniqLocalGwId = uniqlocalgwid
@LocalGatewayName = localgatewayname
@LocalGwIp = localgwip
@CreateTime = createtime
end
def deserialize(params)
@CdcId = params['CdcId']
@VpcId = params['VpcId']
@UniqLocalGwId = params['UniqLocalGwId']
@LocalGatewayName = params['LocalGatewayName']
@LocalGwIp = params['LocalGwIp']
@CreateTime = params['CreateTime']
end
end
# 模板对象成员信息
class MemberInfo < TencentCloud::Common::AbstractModel
# @param Member: 模板对象成员
# @type Member: String
# @param Description: 模板对象成员描述信息
# @type Description: String
attr_accessor :Member, :Description
def initialize(member=nil, description=nil)
@Member = member
@Description = description
end
def deserialize(params)
@Member = params['Member']
@Description = params['Description']
end
end
# MigrateNetworkInterface请求参数结构体
class MigrateNetworkInterfaceRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param SourceInstanceId: 弹性网卡当前绑定的CVM实例ID。形如：ins-r8hr2upy。
# @type SourceInstanceId: String
# @param DestinationInstanceId: 待迁移的目的CVM实例ID。
# @type DestinationInstanceId: String
# @param AttachType: 网卡绑定类型：0 标准型 1 扩展型。
# @type AttachType: Integer
attr_accessor :NetworkInterfaceId, :SourceInstanceId, :DestinationInstanceId, :AttachType
def initialize(networkinterfaceid=nil, sourceinstanceid=nil, destinationinstanceid=nil, attachtype=nil)
@NetworkInterfaceId = networkinterfaceid
@SourceInstanceId = sourceinstanceid
@DestinationInstanceId = destinationinstanceid
@AttachType = attachtype
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
@SourceInstanceId = params['SourceInstanceId']
@DestinationInstanceId = params['DestinationInstanceId']
@AttachType = params['AttachType']
end
end
# MigrateNetworkInterface返回参数结构体
class MigrateNetworkInterfaceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# MigratePrivateIpAddress请求参数结构体
class MigratePrivateIpAddressRequest < TencentCloud::Common::AbstractModel
# @param SourceNetworkInterfaceId: 当内网IP绑定的弹性网卡实例ID，例如：eni-m6dyj72l。
# @type SourceNetworkInterfaceId: String
# @param DestinationNetworkInterfaceId: 待迁移的目的弹性网卡实例ID。
# @type DestinationNetworkInterfaceId: String
# @param PrivateIpAddress: 迁移的内网IP地址，例如：10.0.0.6。
# @type PrivateIpAddress: String
attr_accessor :SourceNetworkInterfaceId, :DestinationNetworkInterfaceId, :PrivateIpAddress
def initialize(sourcenetworkinterfaceid=nil, destinationnetworkinterfaceid=nil, privateipaddress=nil)
@SourceNetworkInterfaceId = sourcenetworkinterfaceid
@DestinationNetworkInterfaceId = destinationnetworkinterfaceid
@PrivateIpAddress = privateipaddress
end
def deserialize(params)
@SourceNetworkInterfaceId = params['SourceNetworkInterfaceId']
@DestinationNetworkInterfaceId = params['DestinationNetworkInterfaceId']
@PrivateIpAddress = params['PrivateIpAddress']
end
end
# MigratePrivateIpAddress返回参数结构体
class MigratePrivateIpAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAddressAttribute请求参数结构体
class ModifyAddressAttributeRequest < TencentCloud::Common::AbstractModel
# @param AddressId: 标识 EIP 的唯一 ID。EIP 唯一 ID 形如：`eip-11112222`。
# @type AddressId: String
# @param AddressName: 修改后的 EIP 名称。长度上限为20个字符。
# @type AddressName: String
# @param EipDirectConnection: 设定EIP是否直通，"TRUE"表示直通，"FALSE"表示非直通。注意该参数仅对EIP直通功能可见的用户可以设定。
# @type EipDirectConnection: String
attr_accessor :AddressId, :AddressName, :EipDirectConnection
def initialize(addressid=nil, addressname=nil, eipdirectconnection=nil)
@AddressId = addressid
@AddressName = addressname
@EipDirectConnection = eipdirectconnection
end
def deserialize(params)
@AddressId = params['AddressId']
@AddressName = params['AddressName']
@EipDirectConnection = params['EipDirectConnection']
end
end
# ModifyAddressAttribute返回参数结构体
class ModifyAddressAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAddressInternetChargeType请求参数结构体
class ModifyAddressInternetChargeTypeRequest < TencentCloud::Common::AbstractModel
# @param AddressId: 弹性公网IP的唯一ID，形如eip-xxx
# @type AddressId: String
# @param InternetChargeType: 弹性公网IP调整目标计费模式，只支持"BANDWIDTH_PREPAID_BY_MONTH"和"TRAFFIC_POSTPAID_BY_HOUR"
# @type InternetChargeType: String
# @param InternetMaxBandwidthOut: 弹性公网IP调整目标带宽值
# @type InternetMaxBandwidthOut: Integer
# @param AddressChargePrepaid: 包月带宽网络计费模式参数。弹性公网IP的调整目标计费模式是"BANDWIDTH_PREPAID_BY_MONTH"时，必传该参数。
# @type AddressChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.AddressChargePrepaid`
attr_accessor :AddressId, :InternetChargeType, :InternetMaxBandwidthOut, :AddressChargePrepaid
def initialize(addressid=nil, internetchargetype=nil, internetmaxbandwidthout=nil, addresschargeprepaid=nil)
@AddressId = addressid
@InternetChargeType = internetchargetype
@InternetMaxBandwidthOut = internetmaxbandwidthout
@AddressChargePrepaid = addresschargeprepaid
end
def deserialize(params)
@AddressId = params['AddressId']
@InternetChargeType = params['InternetChargeType']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
unless params['AddressChargePrepaid'].nil?
@AddressChargePrepaid = AddressChargePrepaid.new
@AddressChargePrepaid.deserialize(params['AddressChargePrepaid'])
end
end
end
# ModifyAddressInternetChargeType返回参数结构体
class ModifyAddressInternetChargeTypeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAddressTemplateAttribute请求参数结构体
class ModifyAddressTemplateAttributeRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateId: IP地址模板实例ID，例如：ipm-mdunqeb6。
# @type AddressTemplateId: String
# @param AddressTemplateName: IP地址模板名称。
# @type AddressTemplateName: String
# @param Addresses: 地址信息，支持 IP、CIDR、IP 范围。
# @type Addresses: Array
# @param AddressesExtra: 支持添加备注的地址信息，支持 IP、CIDR、IP 范围。
# @type AddressesExtra: Array
attr_accessor :AddressTemplateId, :AddressTemplateName, :Addresses, :AddressesExtra
def initialize(addresstemplateid=nil, addresstemplatename=nil, addresses=nil, addressesextra=nil)
@AddressTemplateId = addresstemplateid
@AddressTemplateName = addresstemplatename
@Addresses = addresses
@AddressesExtra = addressesextra
end
def deserialize(params)
@AddressTemplateId = params['AddressTemplateId']
@AddressTemplateName = params['AddressTemplateName']
@Addresses = params['Addresses']
unless params['AddressesExtra'].nil?
@AddressesExtra = []
params['AddressesExtra'].each do |i|
addressinfo_tmp = AddressInfo.new
addressinfo_tmp.deserialize(i)
@AddressesExtra << addressinfo_tmp
end
end
end
end
# ModifyAddressTemplateAttribute返回参数结构体
class ModifyAddressTemplateAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAddressTemplateGroupAttribute请求参数结构体
class ModifyAddressTemplateGroupAttributeRequest < TencentCloud::Common::AbstractModel
# @param AddressTemplateGroupId: IP地址模板集合实例ID，例如：ipmg-2uw6ujo6。
# @type AddressTemplateGroupId: String
# @param AddressTemplateGroupName: IP地址模板集合名称。
# @type AddressTemplateGroupName: String
# @param AddressTemplateIds: IP地址模板实例ID， 例如：ipm-mdunqeb6。
# @type AddressTemplateIds: Array
attr_accessor :AddressTemplateGroupId, :AddressTemplateGroupName, :AddressTemplateIds
def initialize(addresstemplategroupid=nil, addresstemplategroupname=nil, addresstemplateids=nil)
@AddressTemplateGroupId = addresstemplategroupid
@AddressTemplateGroupName = addresstemplategroupname
@AddressTemplateIds = addresstemplateids
end
def deserialize(params)
@AddressTemplateGroupId = params['AddressTemplateGroupId']
@AddressTemplateGroupName = params['AddressTemplateGroupName']
@AddressTemplateIds = params['AddressTemplateIds']
end
end
# ModifyAddressTemplateGroupAttribute返回参数结构体
class ModifyAddressTemplateGroupAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAddressesBandwidth请求参数结构体
class ModifyAddressesBandwidthRequest < TencentCloud::Common::AbstractModel
# @param AddressIds: EIP唯一标识ID列表，形如'eip-xxxx'
# @type AddressIds: Array
# @param InternetMaxBandwidthOut: 调整带宽目标值
# @type InternetMaxBandwidthOut: Integer
# @param StartTime: 包月带宽起始时间(已废弃，输入无效)
# @type StartTime: String
# @param EndTime: 包月带宽结束时间(已废弃，输入无效)
# @type EndTime: String
attr_accessor :AddressIds, :InternetMaxBandwidthOut, :StartTime, :EndTime
def initialize(addressids=nil, internetmaxbandwidthout=nil, starttime=nil, endtime=nil)
@AddressIds = addressids
@InternetMaxBandwidthOut = internetmaxbandwidthout
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@AddressIds = params['AddressIds']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# ModifyAddressesBandwidth返回参数结构体
class ModifyAddressesBandwidthResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ModifyAssistantCidr请求参数结构体
class ModifyAssistantCidrRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-6v2ht8q5`
# @type VpcId: String
# @param NewCidrBlocks: 待添加的辅助CIDR。CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]，入参NewCidrBlocks和OldCidrBlocks至少需要其一。
# @type NewCidrBlocks: Array
# @param OldCidrBlocks: 待删除的辅助CIDR。CIDR数组，格式如["10.0.0.0/16", "172.16.0.0/16"]，入参NewCidrBlocks和OldCidrBlocks至少需要其一。
# @type OldCidrBlocks: Array
attr_accessor :VpcId, :NewCidrBlocks, :OldCidrBlocks
def initialize(vpcid=nil, newcidrblocks=nil, oldcidrblocks=nil)
@VpcId = vpcid
@NewCidrBlocks = newcidrblocks
@OldCidrBlocks = oldcidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
@NewCidrBlocks = params['NewCidrBlocks']
@OldCidrBlocks = params['OldCidrBlocks']
end
end
# ModifyAssistantCidr返回参数结构体
class ModifyAssistantCidrResponse < TencentCloud::Common::AbstractModel
# @param AssistantCidrSet: 辅助CIDR数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssistantCidrSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AssistantCidrSet, :RequestId
def initialize(assistantcidrset=nil, requestid=nil)
@AssistantCidrSet = assistantcidrset
@RequestId = requestid
end
def deserialize(params)
unless params['AssistantCidrSet'].nil?
@AssistantCidrSet = []
params['AssistantCidrSet'].each do |i|
assistantcidr_tmp = AssistantCidr.new
assistantcidr_tmp.deserialize(i)
@AssistantCidrSet << assistantcidr_tmp
end
end
@RequestId = params['RequestId']
end
end
# ModifyBandwidthPackageAttribute请求参数结构体
class ModifyBandwidthPackageAttributeRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 带宽包唯一标识ID
# @type BandwidthPackageId: String
# @param BandwidthPackageName: 带宽包名称
# @type BandwidthPackageName: String
# @param ChargeType: 带宽包计费模式
# @type ChargeType: String
# @param MigrateOnRefund: 退款时迁移为后付费带宽包。默认值：否
# @type MigrateOnRefund: Boolean
attr_accessor :BandwidthPackageId, :BandwidthPackageName, :ChargeType, :MigrateOnRefund
def initialize(bandwidthpackageid=nil, bandwidthpackagename=nil, chargetype=nil, migrateonrefund=nil)
@BandwidthPackageId = bandwidthpackageid
@BandwidthPackageName = bandwidthpackagename
@ChargeType = chargetype
@MigrateOnRefund = migrateonrefund
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
@BandwidthPackageName = params['BandwidthPackageName']
@ChargeType = params['ChargeType']
@MigrateOnRefund = params['MigrateOnRefund']
end
end
# ModifyBandwidthPackageAttribute返回参数结构体
class ModifyBandwidthPackageAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyCcnAttachedInstancesAttribute请求参数结构体
class ModifyCcnAttachedInstancesAttributeRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Instances: 关联网络实例列表
# @type Instances: Array
attr_accessor :CcnId, :Instances
def initialize(ccnid=nil, instances=nil)
@CcnId = ccnid
@Instances = instances
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
end
end
# ModifyCcnAttachedInstancesAttribute返回参数结构体
class ModifyCcnAttachedInstancesAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyCcnAttribute请求参数结构体
class ModifyCcnAttributeRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param CcnName: CCN名称，最大长度不能超过60个字节，限制：CcnName和CcnDescription必须至少选择一个参数输入，否则报错。
# @type CcnName: String
# @param CcnDescription: CCN描述信息，最大长度不能超过100个字节，限制：CcnName和CcnDescription必须至少选择一个参数输入，否则报错。
# @type CcnDescription: String
attr_accessor :CcnId, :CcnName, :CcnDescription
def initialize(ccnid=nil, ccnname=nil, ccndescription=nil)
@CcnId = ccnid
@CcnName = ccnname
@CcnDescription = ccndescription
end
def deserialize(params)
@CcnId = params['CcnId']
@CcnName = params['CcnName']
@CcnDescription = params['CcnDescription']
end
end
# ModifyCcnAttribute返回参数结构体
class ModifyCcnAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyCcnRegionBandwidthLimitsType请求参数结构体
class ModifyCcnRegionBandwidthLimitsTypeRequest < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网实例ID。
# @type CcnId: String
# @param BandwidthLimitType: 云联网限速类型，INTER_REGION_LIMIT：地域间限速，OUTER_REGION_LIMIT：地域出口限速。
# @type BandwidthLimitType: String
attr_accessor :CcnId, :BandwidthLimitType
def initialize(ccnid=nil, bandwidthlimittype=nil)
@CcnId = ccnid
@BandwidthLimitType = bandwidthlimittype
end
def deserialize(params)
@CcnId = params['CcnId']
@BandwidthLimitType = params['BandwidthLimitType']
end
end
# ModifyCcnRegionBandwidthLimitsType返回参数结构体
class ModifyCcnRegionBandwidthLimitsTypeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyCustomerGatewayAttribute请求参数结构体
class ModifyCustomerGatewayAttributeRequest < TencentCloud::Common::AbstractModel
# @param CustomerGatewayId: 对端网关ID，例如：cgw-2wqq41m9，可通过DescribeCustomerGateways接口查询对端网关。
# @type CustomerGatewayId: String
# @param CustomerGatewayName: 对端网关名称，可任意命名，但不得超过60个字符。
# @type CustomerGatewayName: String
attr_accessor :CustomerGatewayId, :CustomerGatewayName
def initialize(customergatewayid=nil, customergatewayname=nil)
@CustomerGatewayId = customergatewayid
@CustomerGatewayName = customergatewayname
end
def deserialize(params)
@CustomerGatewayId = params['CustomerGatewayId']
@CustomerGatewayName = params['CustomerGatewayName']
end
end
# ModifyCustomerGatewayAttribute返回参数结构体
class ModifyCustomerGatewayAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDhcpIpAttribute请求参数结构体
class ModifyDhcpIpAttributeRequest < TencentCloud::Common::AbstractModel
# @param DhcpIpId: `DhcpIp`唯一`ID`，形如：`dhcpip-9o233uri`。
# @type DhcpIpId: String
# @param DhcpIpName: `DhcpIp`名称，可任意命名，但不得超过60个字符。
# @type DhcpIpName: String
attr_accessor :DhcpIpId, :DhcpIpName
def initialize(dhcpipid=nil, dhcpipname=nil)
@DhcpIpId = dhcpipid
@DhcpIpName = dhcpipname
end
def deserialize(params)
@DhcpIpId = params['DhcpIpId']
@DhcpIpName = params['DhcpIpName']
end
end
# ModifyDhcpIpAttribute返回参数结构体
class ModifyDhcpIpAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDirectConnectGatewayAttribute请求参数结构体
class ModifyDirectConnectGatewayAttributeRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关唯一`ID`，形如：`dcg-9o233uri`。
# @type DirectConnectGatewayId: String
# @param DirectConnectGatewayName: 专线网关名称，可任意命名，但不得超过60个字符。
# @type DirectConnectGatewayName: String
# @param CcnRouteType: 云联网路由学习类型，可选值：`BGP`（自动学习）、`STATIC`（静态，即用户配置）。只有云联网类型专线网关且开启了BGP功能才支持修改`CcnRouteType`。
# @type CcnRouteType: String
# @param ModeType: 云联网路由发布模式，可选值：`standard`（标准模式）、`exquisite`（精细模式）。只有云联网类型专线网关才支持修改`ModeType`。
# @type ModeType: String
attr_accessor :DirectConnectGatewayId, :DirectConnectGatewayName, :CcnRouteType, :ModeType
def initialize(directconnectgatewayid=nil, directconnectgatewayname=nil, ccnroutetype=nil, modetype=nil)
@DirectConnectGatewayId = directconnectgatewayid
@DirectConnectGatewayName = directconnectgatewayname
@CcnRouteType = ccnroutetype
@ModeType = modetype
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@DirectConnectGatewayName = params['DirectConnectGatewayName']
@CcnRouteType = params['CcnRouteType']
@ModeType = params['ModeType']
end
end
# ModifyDirectConnectGatewayAttribute返回参数结构体
class ModifyDirectConnectGatewayAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyFlowLogAttribute请求参数结构体
class ModifyFlowLogAttributeRequest < TencentCloud::Common::AbstractModel
# @param FlowLogId: 流日志唯一ID
# @type FlowLogId: String
# @param VpcId: 私用网络ID或者统一ID，建议使用统一ID，修改云联网流日志属性时可不填，其他流日志类型必填。
# @type VpcId: String
# @param FlowLogName: 流日志实例名字
# @type FlowLogName: String
# @param FlowLogDescription: 流日志实例描述
# @type FlowLogDescription: String
attr_accessor :FlowLogId, :VpcId, :FlowLogName, :FlowLogDescription
def initialize(flowlogid=nil, vpcid=nil, flowlogname=nil, flowlogdescription=nil)
@FlowLogId = flowlogid
@VpcId = vpcid
@FlowLogName = flowlogname
@FlowLogDescription = flowlogdescription
end
def deserialize(params)
@FlowLogId = params['FlowLogId']
@VpcId = params['VpcId']
@FlowLogName = params['FlowLogName']
@FlowLogDescription = params['FlowLogDescription']
end
end
# ModifyFlowLogAttribute返回参数结构体
class ModifyFlowLogAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyGatewayFlowQos请求参数结构体
class ModifyGatewayFlowQosRequest < TencentCloud::Common::AbstractModel
# @param GatewayId: 网关实例ID，目前我们支持的网关实例类型有，
# 专线网关实例ID，形如，`dcg-ltjahce6`；
# Nat网关实例ID，形如，`nat-ltjahce6`；
# VPN网关实例ID，形如，`vpn-ltjahce6`。
# @type GatewayId: String
# @param Bandwidth: 流控带宽值。取值大于0，表示限流到指定的Mbps；取值等于0，表示完全限流；取值为-1，不限流。
# @type Bandwidth: Integer
# @param IpAddresses: 限流的云服务器内网IP。
# @type IpAddresses: Array
attr_accessor :GatewayId, :Bandwidth, :IpAddresses
def initialize(gatewayid=nil, bandwidth=nil, ipaddresses=nil)
@GatewayId = gatewayid
@Bandwidth = bandwidth
@IpAddresses = ipaddresses
end
def deserialize(params)
@GatewayId = params['GatewayId']
@Bandwidth = params['Bandwidth']
@IpAddresses = params['IpAddresses']
end
end
# ModifyGatewayFlowQos返回参数结构体
class ModifyGatewayFlowQosResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyHaVipAttribute请求参数结构体
class ModifyHaVipAttributeRequest < TencentCloud::Common::AbstractModel
# @param HaVipId: `HAVIP`唯一`ID`，形如：`havip-9o233uri`。
# @type HaVipId: String
# @param HaVipName: `HAVIP`名称，可任意命名，但不得超过60个字符。
# @type HaVipName: String
attr_accessor :HaVipId, :HaVipName
def initialize(havipid=nil, havipname=nil)
@HaVipId = havipid
@HaVipName = havipname
end
def deserialize(params)
@HaVipId = params['HaVipId']
@HaVipName = params['HaVipName']
end
end
# ModifyHaVipAttribute返回参数结构体
class ModifyHaVipAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyIp6AddressesBandwidth请求参数结构体
class ModifyIp6AddressesBandwidthRequest < TencentCloud::Common::AbstractModel
# @param InternetMaxBandwidthOut: 修改的目标带宽，单位Mbps
# @type InternetMaxBandwidthOut: Integer
# @param Ip6Addresses: IPV6地址。Ip6Addresses和Ip6AddressId必须且只能传一个
# @type Ip6Addresses: Array
# @param Ip6AddressIds: IPV6地址对应的唯一ID，形如eip-xxxxxxxx。Ip6Addresses和Ip6AddressId必须且只能传一个
# @type Ip6AddressIds: Array
attr_accessor :InternetMaxBandwidthOut, :Ip6Addresses, :Ip6AddressIds
def initialize(internetmaxbandwidthout=nil, ip6addresses=nil, ip6addressids=nil)
@InternetMaxBandwidthOut = internetmaxbandwidthout
@Ip6Addresses = ip6addresses
@Ip6AddressIds = ip6addressids
end
def deserialize(params)
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@Ip6Addresses = params['Ip6Addresses']
@Ip6AddressIds = params['Ip6AddressIds']
end
end
# ModifyIp6AddressesBandwidth返回参数结构体
class ModifyIp6AddressesBandwidthResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 任务ID
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ModifyIp6Rule请求参数结构体
class ModifyIp6RuleRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorId: IPV6转换实例唯一ID，形如ip6-xxxxxxxx
# @type Ip6TranslatorId: String
# @param Ip6RuleId: IPV6转换规则唯一ID，形如rule6-xxxxxxxx
# @type Ip6RuleId: String
# @param Ip6RuleName: IPV6转换规则修改后的名称
# @type Ip6RuleName: String
# @param Vip: IPV6转换规则修改后的IPV4地址
# @type Vip: String
# @param Vport: IPV6转换规则修改后的IPV4端口号
# @type Vport: Integer
attr_accessor :Ip6TranslatorId, :Ip6RuleId, :Ip6RuleName, :Vip, :Vport
def initialize(ip6translatorid=nil, ip6ruleid=nil, ip6rulename=nil, vip=nil, vport=nil)
@Ip6TranslatorId = ip6translatorid
@Ip6RuleId = ip6ruleid
@Ip6RuleName = ip6rulename
@Vip = vip
@Vport = vport
end
def deserialize(params)
@Ip6TranslatorId = params['Ip6TranslatorId']
@Ip6RuleId = params['Ip6RuleId']
@Ip6RuleName = params['Ip6RuleName']
@Vip = params['Vip']
@Vport = params['Vport']
end
end
# ModifyIp6Rule返回参数结构体
class ModifyIp6RuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyIp6Translator请求参数结构体
class ModifyIp6TranslatorRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorId: IPV6转换实例唯一ID，形如ip6-xxxxxxxxx
# @type Ip6TranslatorId: String
# @param Ip6TranslatorName: IPV6转换实例修改名称
# @type Ip6TranslatorName: String
attr_accessor :Ip6TranslatorId, :Ip6TranslatorName
def initialize(ip6translatorid=nil, ip6translatorname=nil)
@Ip6TranslatorId = ip6translatorid
@Ip6TranslatorName = ip6translatorname
end
def deserialize(params)
@Ip6TranslatorId = params['Ip6TranslatorId']
@Ip6TranslatorName = params['Ip6TranslatorName']
end
end
# ModifyIp6Translator返回参数结构体
class ModifyIp6TranslatorResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyIpv6AddressesAttribute请求参数结构体
class ModifyIpv6AddressesAttributeRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例`ID`，形如：`eni-m6dyj72l`。
# @type NetworkInterfaceId: String
# @param Ipv6Addresses: 指定的内网IPv6`地址信息。
# @type Ipv6Addresses: Array
attr_accessor :NetworkInterfaceId, :Ipv6Addresses
def initialize(networkinterfaceid=nil, ipv6addresses=nil)
@NetworkInterfaceId = networkinterfaceid
@Ipv6Addresses = ipv6addresses
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['Ipv6Addresses'].nil?
@Ipv6Addresses = []
params['Ipv6Addresses'].each do |i|
ipv6address_tmp = Ipv6Address.new
ipv6address_tmp.deserialize(i)
@Ipv6Addresses << ipv6address_tmp
end
end
end
end
# ModifyIpv6AddressesAttribute返回参数结构体
class ModifyIpv6AddressesAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyLocalGateway请求参数结构体
class ModifyLocalGatewayRequest < TencentCloud::Common::AbstractModel
# @param LocalGatewayName: 本地网关名称
# @type LocalGatewayName: String
# @param CdcId: CDC实例ID
# @type CdcId: String
# @param LocalGatewayId: 本地网关实例ID
# @type LocalGatewayId: String
# @param VpcId: VPC实例ID
# @type VpcId: String
attr_accessor :LocalGatewayName, :CdcId, :LocalGatewayId, :VpcId
def initialize(localgatewayname=nil, cdcid=nil, localgatewayid=nil, vpcid=nil)
@LocalGatewayName = localgatewayname
@CdcId = cdcid
@LocalGatewayId = localgatewayid
@VpcId = vpcid
end
def deserialize(params)
@LocalGatewayName = params['LocalGatewayName']
@CdcId = params['CdcId']
@LocalGatewayId = params['LocalGatewayId']
@VpcId = params['VpcId']
end
end
# ModifyLocalGateway返回参数结构体
class ModifyLocalGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNatGatewayAttribute请求参数结构体
class ModifyNatGatewayAttributeRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param NatGatewayName: NAT网关的名称，形如：`test_nat`。
# @type NatGatewayName: String
# @param InternetMaxBandwidthOut: NAT网关最大外网出带宽(单位:Mbps)。
# @type InternetMaxBandwidthOut: Integer
# @param ModifySecurityGroup: 是否修改NAT网关绑定的安全组。
# @type ModifySecurityGroup: Boolean
# @param SecurityGroupIds: NAT网关绑定的安全组列表，最终状态，空列表表示删除所有安全组，形如: `['sg-1n232323', 'sg-o4242424']`
# @type SecurityGroupIds: Array
attr_accessor :NatGatewayId, :NatGatewayName, :InternetMaxBandwidthOut, :ModifySecurityGroup, :SecurityGroupIds
def initialize(natgatewayid=nil, natgatewayname=nil, internetmaxbandwidthout=nil, modifysecuritygroup=nil, securitygroupids=nil)
@NatGatewayId = natgatewayid
@NatGatewayName = natgatewayname
@InternetMaxBandwidthOut = internetmaxbandwidthout
@ModifySecurityGroup = modifysecuritygroup
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@NatGatewayName = params['NatGatewayName']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@ModifySecurityGroup = params['ModifySecurityGroup']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# ModifyNatGatewayAttribute返回参数结构体
class ModifyNatGatewayAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNatGatewayDestinationIpPortTranslationNatRule请求参数结构体
class ModifyNatGatewayDestinationIpPortTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df45454`。
# @type NatGatewayId: String
# @param SourceNatRule: 源NAT网关的端口转换规则。
# @type SourceNatRule: :class:`Tencentcloud::Vpc.v20170312.models.DestinationIpPortTranslationNatRule`
# @param DestinationNatRule: 目的NAT网关的端口转换规则。
# @type DestinationNatRule: :class:`Tencentcloud::Vpc.v20170312.models.DestinationIpPortTranslationNatRule`
attr_accessor :NatGatewayId, :SourceNatRule, :DestinationNatRule
def initialize(natgatewayid=nil, sourcenatrule=nil, destinationnatrule=nil)
@NatGatewayId = natgatewayid
@SourceNatRule = sourcenatrule
@DestinationNatRule = destinationnatrule
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['SourceNatRule'].nil?
@SourceNatRule = DestinationIpPortTranslationNatRule.new
@SourceNatRule.deserialize(params['SourceNatRule'])
end
unless params['DestinationNatRule'].nil?
@DestinationNatRule = DestinationIpPortTranslationNatRule.new
@DestinationNatRule.deserialize(params['DestinationNatRule'])
end
end
end
# ModifyNatGatewayDestinationIpPortTranslationNatRule返回参数结构体
class ModifyNatGatewayDestinationIpPortTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNatGatewaySourceIpTranslationNatRule请求参数结构体
class ModifyNatGatewaySourceIpTranslationNatRuleRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID，形如：`nat-df453454`。
# @type NatGatewayId: String
# @param SourceIpTranslationNatRule: NAT网关的SNAT转换规则。
# @type SourceIpTranslationNatRule: :class:`Tencentcloud::Vpc.v20170312.models.SourceIpTranslationNatRule`
attr_accessor :NatGatewayId, :SourceIpTranslationNatRule
def initialize(natgatewayid=nil, sourceiptranslationnatrule=nil)
@NatGatewayId = natgatewayid
@SourceIpTranslationNatRule = sourceiptranslationnatrule
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
unless params['SourceIpTranslationNatRule'].nil?
@SourceIpTranslationNatRule = SourceIpTranslationNatRule.new
@SourceIpTranslationNatRule.deserialize(params['SourceIpTranslationNatRule'])
end
end
end
# ModifyNatGatewaySourceIpTranslationNatRule返回参数结构体
class ModifyNatGatewaySourceIpTranslationNatRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNetDetect请求参数结构体
class ModifyNetDetectRequest < TencentCloud::Common::AbstractModel
# @param NetDetectId: 网络探测实例`ID`。形如：`netd-12345678`
# @type NetDetectId: String
# @param NetDetectName: 网络探测名称，最大长度不能超过60个字节。
# @type NetDetectName: String
# @param DetectDestinationIp: 探测目的IPv4地址数组，最多两个。
# @type DetectDestinationIp: Array
# @param NextHopType: 下一跳类型，目前我们支持的类型有：
# VPN：VPN网关；
# DIRECTCONNECT：专线网关；
# PEERCONNECTION：对等连接；
# NAT：NAT网关；
# NORMAL_CVM：普通云服务器；
# CCN：云联网网关；
# @type NextHopType: String
# @param NextHopDestination: 下一跳目的网关，取值与“下一跳类型”相关：
# 下一跳类型为VPN，取值VPN网关ID，形如：vpngw-12345678；
# 下一跳类型为DIRECTCONNECT，取值专线网关ID，形如：dcg-12345678；
# 下一跳类型为PEERCONNECTION，取值对等连接ID，形如：pcx-12345678；
# 下一跳类型为NAT，取值Nat网关，形如：nat-12345678；
# 下一跳类型为NORMAL_CVM，取值云服务器IPv4地址，形如：10.0.0.12；
# 下一跳类型为CCN，取值云联网ID，形如：ccn-44csczop；
# @type NextHopDestination: String
# @param NetDetectDescription: 网络探测描述。
# @type NetDetectDescription: String
attr_accessor :NetDetectId, :NetDetectName, :DetectDestinationIp, :NextHopType, :NextHopDestination, :NetDetectDescription
def initialize(netdetectid=nil, netdetectname=nil, detectdestinationip=nil, nexthoptype=nil, nexthopdestination=nil, netdetectdescription=nil)
@NetDetectId = netdetectid
@NetDetectName = netdetectname
@DetectDestinationIp = detectdestinationip
@NextHopType = nexthoptype
@NextHopDestination = nexthopdestination
@NetDetectDescription = netdetectdescription
end
def deserialize(params)
@NetDetectId = params['NetDetectId']
@NetDetectName = params['NetDetectName']
@DetectDestinationIp = params['DetectDestinationIp']
@NextHopType = params['NextHopType']
@NextHopDestination = params['NextHopDestination']
@NetDetectDescription = params['NetDetectDescription']
end
end
# ModifyNetDetect返回参数结构体
class ModifyNetDetectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNetworkAclAttribute请求参数结构体
class ModifyNetworkAclAttributeRequest < TencentCloud::Common::AbstractModel
# @param NetworkAclId: 网络ACL实例ID。例如：acl-12345678。
# @type NetworkAclId: String
# @param NetworkAclName: 网络ACL名称，最大长度不能超过60个字节。
# @type NetworkAclName: String
attr_accessor :NetworkAclId, :NetworkAclName
def initialize(networkaclid=nil, networkaclname=nil)
@NetworkAclId = networkaclid
@NetworkAclName = networkaclname
end
def deserialize(params)
@NetworkAclId = params['NetworkAclId']
@NetworkAclName = params['NetworkAclName']
end
end
# ModifyNetworkAclAttribute返回参数结构体
class ModifyNetworkAclAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNetworkAclEntries请求参数结构体
class ModifyNetworkAclEntriesRequest < TencentCloud::Common::AbstractModel
# @param NetworkAclId: 网络ACL实例ID。例如：acl-12345678。
# @type NetworkAclId: String
# @param NetworkAclEntrySet: 网络ACL规则集。
# @type NetworkAclEntrySet: :class:`Tencentcloud::Vpc.v20170312.models.NetworkAclEntrySet`
attr_accessor :NetworkAclId, :NetworkAclEntrySet
def initialize(networkaclid=nil, networkaclentryset=nil)
@NetworkAclId = networkaclid
@NetworkAclEntrySet = networkaclentryset
end
def deserialize(params)
@NetworkAclId = params['NetworkAclId']
unless params['NetworkAclEntrySet'].nil?
@NetworkAclEntrySet = NetworkAclEntrySet.new
@NetworkAclEntrySet.deserialize(params['NetworkAclEntrySet'])
end
end
end
# ModifyNetworkAclEntries返回参数结构体
class ModifyNetworkAclEntriesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNetworkInterfaceAttribute请求参数结构体
class ModifyNetworkInterfaceAttributeRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-pxir56ns。
# @type NetworkInterfaceId: String
# @param NetworkInterfaceName: 弹性网卡名称，最大长度不能超过60个字节。
# @type NetworkInterfaceName: String
# @param NetworkInterfaceDescription: 弹性网卡描述，可任意命名，但不得超过60个字符。
# @type NetworkInterfaceDescription: String
# @param SecurityGroupIds: 指定绑定的安全组，例如:['sg-1dd51d']。
# @type SecurityGroupIds: Array
attr_accessor :NetworkInterfaceId, :NetworkInterfaceName, :NetworkInterfaceDescription, :SecurityGroupIds
def initialize(networkinterfaceid=nil, networkinterfacename=nil, networkinterfacedescription=nil, securitygroupids=nil)
@NetworkInterfaceId = networkinterfaceid
@NetworkInterfaceName = networkinterfacename
@NetworkInterfaceDescription = networkinterfacedescription
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
@NetworkInterfaceName = params['NetworkInterfaceName']
@NetworkInterfaceDescription = params['NetworkInterfaceDescription']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# ModifyNetworkInterfaceAttribute返回参数结构体
class ModifyNetworkInterfaceAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNetworkInterfaceQos请求参数结构体
class ModifyNetworkInterfaceQosRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceIds: 弹性网卡ID，支持批量修改。
# @type NetworkInterfaceIds: Array
# @param QosLevel: 服务质量，可选值：AU、AG、PT，分别代表金、银、白金三个等级。
# @type QosLevel: String
attr_accessor :NetworkInterfaceIds, :QosLevel
def initialize(networkinterfaceids=nil, qoslevel=nil)
@NetworkInterfaceIds = networkinterfaceids
@QosLevel = qoslevel
end
def deserialize(params)
@NetworkInterfaceIds = params['NetworkInterfaceIds']
@QosLevel = params['QosLevel']
end
end
# ModifyNetworkInterfaceQos返回参数结构体
class ModifyNetworkInterfaceQosResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrivateIpAddressesAttribute请求参数结构体
class ModifyPrivateIpAddressesAttributeRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param PrivateIpAddresses: 指定的内网IP信息。
# @type PrivateIpAddresses: Array
attr_accessor :NetworkInterfaceId, :PrivateIpAddresses
def initialize(networkinterfaceid=nil, privateipaddresses=nil)
@NetworkInterfaceId = networkinterfaceid
@PrivateIpAddresses = privateipaddresses
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['PrivateIpAddresses'].nil?
@PrivateIpAddresses = []
params['PrivateIpAddresses'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddresses << privateipaddressspecification_tmp
end
end
end
end
# ModifyPrivateIpAddressesAttribute返回参数结构体
class ModifyPrivateIpAddressesAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyRouteTableAttribute请求参数结构体
class ModifyRouteTableAttributeRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
attr_accessor :RouteTableId, :RouteTableName
def initialize(routetableid=nil, routetablename=nil)
@RouteTableId = routetableid
@RouteTableName = routetablename
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteTableName = params['RouteTableName']
end
end
# ModifyRouteTableAttribute返回参数结构体
class ModifyRouteTableAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySecurityGroupAttribute请求参数结构体
class ModifySecurityGroupAttributeRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param GroupName: 安全组名称，可任意命名，但不得超过60个字符。
# @type GroupName: String
# @param GroupDescription: 安全组备注，最多100个字符。
# @type GroupDescription: String
attr_accessor :SecurityGroupId, :GroupName, :GroupDescription
def initialize(securitygroupid=nil, groupname=nil, groupdescription=nil)
@SecurityGroupId = securitygroupid
@GroupName = groupname
@GroupDescription = groupdescription
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
@GroupName = params['GroupName']
@GroupDescription = params['GroupDescription']
end
end
# ModifySecurityGroupAttribute返回参数结构体
class ModifySecurityGroupAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySecurityGroupPolicies请求参数结构体
class ModifySecurityGroupPoliciesRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param SecurityGroupPolicySet: 安全组规则集合。 SecurityGroupPolicySet对象必须同时指定新的出（Egress）入（Ingress）站规则。 SecurityGroupPolicy对象不支持自定义索引（PolicyIndex）。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
# @param SortPolicys: 排序安全组标识，默认值为False。当SortPolicys为False时，不改变安全组规则排序；当SortPolicys为True时，系统将严格按照SecurityGroupPolicySet参数传入的安全组规则及顺序进行重置，考虑到人为输入参数可能存在遗漏风险，建议通过控制台对安全组规则进行排序。
# @type SortPolicys: Boolean
attr_accessor :SecurityGroupId, :SecurityGroupPolicySet, :SortPolicys
def initialize(securitygroupid=nil, securitygrouppolicyset=nil, sortpolicys=nil)
@SecurityGroupId = securitygroupid
@SecurityGroupPolicySet = securitygrouppolicyset
@SortPolicys = sortpolicys
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
@SortPolicys = params['SortPolicys']
end
end
# ModifySecurityGroupPolicies返回参数结构体
class ModifySecurityGroupPoliciesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyServiceTemplateAttribute请求参数结构体
class ModifyServiceTemplateAttributeRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateId: 协议端口模板实例ID，例如：ppm-529nwwj8。
# @type ServiceTemplateId: String
# @param ServiceTemplateName: 协议端口模板名称。
# @type ServiceTemplateName: String
# @param Services: 支持单个端口、多个端口、连续端口及所有端口，协议支持：TCP、UDP、ICMP、GRE 协议。
# @type Services: Array
# @param ServicesExtra: 支持添加备注的协议端口信息，支持单个端口、多个端口、连续端口及所有端口，协议支持：TCP、UDP、ICMP、GRE 协议。
# @type ServicesExtra: Array
attr_accessor :ServiceTemplateId, :ServiceTemplateName, :Services, :ServicesExtra
def initialize(servicetemplateid=nil, servicetemplatename=nil, services=nil, servicesextra=nil)
@ServiceTemplateId = servicetemplateid
@ServiceTemplateName = servicetemplatename
@Services = services
@ServicesExtra = servicesextra
end
def deserialize(params)
@ServiceTemplateId = params['ServiceTemplateId']
@ServiceTemplateName = params['ServiceTemplateName']
@Services = params['Services']
unless params['ServicesExtra'].nil?
@ServicesExtra = []
params['ServicesExtra'].each do |i|
servicesinfo_tmp = ServicesInfo.new
servicesinfo_tmp.deserialize(i)
@ServicesExtra << servicesinfo_tmp
end
end
end
end
# ModifyServiceTemplateAttribute返回参数结构体
class ModifyServiceTemplateAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyServiceTemplateGroupAttribute请求参数结构体
class ModifyServiceTemplateGroupAttributeRequest < TencentCloud::Common::AbstractModel
# @param ServiceTemplateGroupId: 协议端口模板集合实例ID，例如：ppmg-ei8hfd9a。
# @type ServiceTemplateGroupId: String
# @param ServiceTemplateGroupName: 协议端口模板集合名称。
# @type ServiceTemplateGroupName: String
# @param ServiceTemplateIds: 协议端口模板实例ID，例如：ppm-4dw6agho。
# @type ServiceTemplateIds: Array
attr_accessor :ServiceTemplateGroupId, :ServiceTemplateGroupName, :ServiceTemplateIds
def initialize(servicetemplategroupid=nil, servicetemplategroupname=nil, servicetemplateids=nil)
@ServiceTemplateGroupId = servicetemplategroupid
@ServiceTemplateGroupName = servicetemplategroupname
@ServiceTemplateIds = servicetemplateids
end
def deserialize(params)
@ServiceTemplateGroupId = params['ServiceTemplateGroupId']
@ServiceTemplateGroupName = params['ServiceTemplateGroupName']
@ServiceTemplateIds = params['ServiceTemplateIds']
end
end
# ModifyServiceTemplateGroupAttribute返回参数结构体
class ModifyServiceTemplateGroupAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySubnetAttribute请求参数结构体
class ModifySubnetAttributeRequest < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网实例ID。形如：subnet-pxir56ns。
# @type SubnetId: String
# @param SubnetName: 子网名称，最大长度不能超过60个字节。
# @type SubnetName: String
# @param EnableBroadcast: 子网是否开启广播。
# @type EnableBroadcast: String
attr_accessor :SubnetId, :SubnetName, :EnableBroadcast
def initialize(subnetid=nil, subnetname=nil, enablebroadcast=nil)
@SubnetId = subnetid
@SubnetName = subnetname
@EnableBroadcast = enablebroadcast
end
def deserialize(params)
@SubnetId = params['SubnetId']
@SubnetName = params['SubnetName']
@EnableBroadcast = params['EnableBroadcast']
end
end
# ModifySubnetAttribute返回参数结构体
class ModifySubnetAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyTemplateMember请求参数结构体
class ModifyTemplateMemberRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 参数模板实例ID，支持IP地址、协议端口、IP地址组、协议端口组四种参数模板的实例ID。
# @type TemplateId: String
# @param OriginalTemplateMember: 需要修改的参数模板成员信息，支持IP地址、协议端口、IP地址组、协议端口组四种类型，类型需要与TemplateId参数类型一致，修改顺序与TemplateMember参数顺序一一对应，入参长度需要与TemplateMember参数保持一致。
# @type OriginalTemplateMember: Array
# @param TemplateMember: 新的参数模板成员信息，支持IP地址、协议端口、IP地址组、协议端口组四种类型，类型需要与TemplateId参数类型一致，修改顺序与OriginalTemplateMember参数顺序一一对应，入参长度需要与OriginalTemplateMember参数保持一致。
# @type TemplateMember: Array
attr_accessor :TemplateId, :OriginalTemplateMember, :TemplateMember
def initialize(templateid=nil, originaltemplatemember=nil, templatemember=nil)
@TemplateId = templateid
@OriginalTemplateMember = originaltemplatemember
@TemplateMember = templatemember
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['OriginalTemplateMember'].nil?
@OriginalTemplateMember = []
params['OriginalTemplateMember'].each do |i|
memberinfo_tmp = MemberInfo.new
memberinfo_tmp.deserialize(i)
@OriginalTemplateMember << memberinfo_tmp
end
end
unless params['TemplateMember'].nil?
@TemplateMember = []
params['TemplateMember'].each do |i|
memberinfo_tmp = MemberInfo.new
memberinfo_tmp.deserialize(i)
@TemplateMember << memberinfo_tmp
end
end
end
end
# ModifyTemplateMember返回参数结构体
class ModifyTemplateMemberResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpcAttribute请求参数结构体
class ModifyVpcAttributeRequest < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。形如：vpc-f49l6u0z。每次请求的实例的上限为100。参数不支持同时指定VpcIds和Filters。
# @type VpcId: String
# @param VpcName: 私有网络名称，可任意命名，但不得超过60个字符。
# @type VpcName: String
# @param EnableMulticast: 是否开启组播。true: 开启, false: 关闭。
# @type EnableMulticast: String
# @param DnsServers: DNS地址，最多支持4个，第1个默认为主，其余为备
# @type DnsServers: Array
# @param DomainName: 域名
# @type DomainName: String
attr_accessor :VpcId, :VpcName, :EnableMulticast, :DnsServers, :DomainName
def initialize(vpcid=nil, vpcname=nil, enablemulticast=nil, dnsservers=nil, domainname=nil)
@VpcId = vpcid
@VpcName = vpcname
@EnableMulticast = enablemulticast
@DnsServers = dnsservers
@DomainName = domainname
end
def deserialize(params)
@VpcId = params['VpcId']
@VpcName = params['VpcName']
@EnableMulticast = params['EnableMulticast']
@DnsServers = params['DnsServers']
@DomainName = params['DomainName']
end
end
# ModifyVpcAttribute返回参数结构体
class ModifyVpcAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpcEndPointAttribute请求参数结构体
class ModifyVpcEndPointAttributeRequest < TencentCloud::Common::AbstractModel
# @param EndPointId: 终端节点ID。
# @type EndPointId: String
# @param EndPointName: 终端节点名称。
# @type EndPointName: String
# @param SecurityGroupIds: 安全组ID列表。
# @type SecurityGroupIds: Array
attr_accessor :EndPointId, :EndPointName, :SecurityGroupIds
def initialize(endpointid=nil, endpointname=nil, securitygroupids=nil)
@EndPointId = endpointid
@EndPointName = endpointname
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@EndPointId = params['EndPointId']
@EndPointName = params['EndPointName']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# ModifyVpcEndPointAttribute返回参数结构体
class ModifyVpcEndPointAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpcEndPointServiceAttribute请求参数结构体
class ModifyVpcEndPointServiceAttributeRequest < TencentCloud::Common::AbstractModel
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
# @param VpcId: VPCID。
# @type VpcId: String
# @param EndPointServiceName: 终端节点服务名称。
# @type EndPointServiceName: String
# @param AutoAcceptFlag: 是否自动接受终端节点的连接请求。true：自动接受false：不自动接受
# @type AutoAcceptFlag: Boolean
# @param ServiceInstanceId: 后端服务的ID，比如lb-xxx。
# @type ServiceInstanceId: String
attr_accessor :EndPointServiceId, :VpcId, :EndPointServiceName, :AutoAcceptFlag, :ServiceInstanceId
def initialize(endpointserviceid=nil, vpcid=nil, endpointservicename=nil, autoacceptflag=nil, serviceinstanceid=nil)
@EndPointServiceId = endpointserviceid
@VpcId = vpcid
@EndPointServiceName = endpointservicename
@AutoAcceptFlag = autoacceptflag
@ServiceInstanceId = serviceinstanceid
end
def deserialize(params)
@EndPointServiceId = params['EndPointServiceId']
@VpcId = params['VpcId']
@EndPointServiceName = params['EndPointServiceName']
@AutoAcceptFlag = params['AutoAcceptFlag']
@ServiceInstanceId = params['ServiceInstanceId']
end
end
# ModifyVpcEndPointServiceAttribute返回参数结构体
class ModifyVpcEndPointServiceAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpcEndPointServiceWhiteList请求参数结构体
class ModifyVpcEndPointServiceWhiteListRequest < TencentCloud::Common::AbstractModel
# @param UserUin: 用户UIN。
# @type UserUin: String
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
# @param Description: 白名单描述信息。
# @type Description: String
attr_accessor :UserUin, :EndPointServiceId, :Description
def initialize(useruin=nil, endpointserviceid=nil, description=nil)
@UserUin = useruin
@EndPointServiceId = endpointserviceid
@Description = description
end
def deserialize(params)
@UserUin = params['UserUin']
@EndPointServiceId = params['EndPointServiceId']
@Description = params['Description']
end
end
# ModifyVpcEndPointServiceWhiteList返回参数结构体
class ModifyVpcEndPointServiceWhiteListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpnConnectionAttribute请求参数结构体
class ModifyVpnConnectionAttributeRequest < TencentCloud::Common::AbstractModel
# @param VpnConnectionId: VPN通道实例ID。形如：vpnx-f49l6u0z。
# @type VpnConnectionId: String
# @param VpnConnectionName: VPN通道名称，可任意命名，但不得超过60个字符。
# @type VpnConnectionName: String
# @param PreShareKey: 预共享密钥。
# @type PreShareKey: String
# @param SecurityPolicyDatabases: SPD策略组，例如：{"10.0.0.5/24":["172.123.10.5/16"]}，10.0.0.5/24是vpc内网段172.123.10.5/16是IDC网段。用户指定VPC内哪些网段可以和您IDC中哪些网段通信。
# @type SecurityPolicyDatabases: Array
# @param IKEOptionsSpecification: IKE配置（Internet Key Exchange，因特网密钥交换），IKE具有一套自我保护机制，用户配置网络安全协议。
# @type IKEOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IKEOptionsSpecification`
# @param IPSECOptionsSpecification: IPSec配置，腾讯云提供IPSec安全会话设置。
# @type IPSECOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IPSECOptionsSpecification`
# @param EnableHealthCheck: 是否启用通道健康检查
# @type EnableHealthCheck: Boolean
# @param HealthCheckLocalIp: 本端通道探测ip
# @type HealthCheckLocalIp: String
# @param HealthCheckRemoteIp: 对端通道探测ip
# @type HealthCheckRemoteIp: String
# @param NegotiationType: 协商类型，默认为active（主动协商）。可选值：active（主动协商），passive（被动协商），flowTrigger（流量协商）
# @type NegotiationType: String
# @param DpdEnable: DPD探测开关。默认为0，表示关闭DPD探测。可选值：0（关闭），1（开启）
# @type DpdEnable: Integer
# @param DpdTimeout: DPD超时时间。即探测确认对端不存在需要的时间。dpdEnable为1（开启）时有效。默认30，单位为秒
# @type DpdTimeout: String
# @param DpdAction: DPD超时后的动作。默认为clear。dpdEnable为1（开启）时有效。可取值为clear（断开）和restart（重试）
# @type DpdAction: String
attr_accessor :VpnConnectionId, :VpnConnectionName, :PreShareKey, :SecurityPolicyDatabases, :IKEOptionsSpecification, :IPSECOptionsSpecification, :EnableHealthCheck, :HealthCheckLocalIp, :HealthCheckRemoteIp, :NegotiationType, :DpdEnable, :DpdTimeout, :DpdAction
def initialize(vpnconnectionid=nil, vpnconnectionname=nil, presharekey=nil, securitypolicydatabases=nil, ikeoptionsspecification=nil, ipsecoptionsspecification=nil, enablehealthcheck=nil, healthchecklocalip=nil, healthcheckremoteip=nil, negotiationtype=nil, dpdenable=nil, dpdtimeout=nil, dpdaction=nil)
@VpnConnectionId = vpnconnectionid
@VpnConnectionName = vpnconnectionname
@PreShareKey = presharekey
@SecurityPolicyDatabases = securitypolicydatabases
@IKEOptionsSpecification = ikeoptionsspecification
@IPSECOptionsSpecification = ipsecoptionsspecification
@EnableHealthCheck = enablehealthcheck
@HealthCheckLocalIp = healthchecklocalip
@HealthCheckRemoteIp = healthcheckremoteip
@NegotiationType = negotiationtype
@DpdEnable = dpdenable
@DpdTimeout = dpdtimeout
@DpdAction = dpdaction
end
def deserialize(params)
@VpnConnectionId = params['VpnConnectionId']
@VpnConnectionName = params['VpnConnectionName']
@PreShareKey = params['PreShareKey']
unless params['SecurityPolicyDatabases'].nil?
@SecurityPolicyDatabases = []
params['SecurityPolicyDatabases'].each do |i|
securitypolicydatabase_tmp = SecurityPolicyDatabase.new
securitypolicydatabase_tmp.deserialize(i)
@SecurityPolicyDatabases << securitypolicydatabase_tmp
end
end
unless params['IKEOptionsSpecification'].nil?
@IKEOptionsSpecification = IKEOptionsSpecification.new
@IKEOptionsSpecification.deserialize(params['IKEOptionsSpecification'])
end
unless params['IPSECOptionsSpecification'].nil?
@IPSECOptionsSpecification = IPSECOptionsSpecification.new
@IPSECOptionsSpecification.deserialize(params['IPSECOptionsSpecification'])
end
@EnableHealthCheck = params['EnableHealthCheck']
@HealthCheckLocalIp = params['HealthCheckLocalIp']
@HealthCheckRemoteIp = params['HealthCheckRemoteIp']
@NegotiationType = params['NegotiationType']
@DpdEnable = params['DpdEnable']
@DpdTimeout = params['DpdTimeout']
@DpdAction = params['DpdAction']
end
end
# ModifyVpnConnectionAttribute返回参数结构体
class ModifyVpnConnectionAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpnGatewayAttribute请求参数结构体
class ModifyVpnGatewayAttributeRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param VpnGatewayName: VPN网关名称，最大长度不能超过60个字节。
# @type VpnGatewayName: String
# @param InstanceChargeType: VPN网关计费模式，目前只支持预付费（即包年包月）到后付费（即按量计费）的转换。即参数只支持：POSTPAID_BY_HOUR。
# @type InstanceChargeType: String
attr_accessor :VpnGatewayId, :VpnGatewayName, :InstanceChargeType
def initialize(vpngatewayid=nil, vpngatewayname=nil, instancechargetype=nil)
@VpnGatewayId = vpngatewayid
@VpnGatewayName = vpngatewayname
@InstanceChargeType = instancechargetype
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@VpnGatewayName = params['VpnGatewayName']
@InstanceChargeType = params['InstanceChargeType']
end
end
# ModifyVpnGatewayAttribute返回参数结构体
class ModifyVpnGatewayAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpnGatewayCcnRoutes请求参数结构体
class ModifyVpnGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID
# @type VpnGatewayId: String
# @param Routes: 云联网路由（IDC网段）列表
# @type Routes: Array
attr_accessor :VpnGatewayId, :Routes
def initialize(vpngatewayid=nil, routes=nil)
@VpnGatewayId = vpngatewayid
@Routes = routes
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngwccnroutes_tmp = VpngwCcnRoutes.new
vpngwccnroutes_tmp.deserialize(i)
@Routes << vpngwccnroutes_tmp
end
end
end
end
# ModifyVpnGatewayCcnRoutes返回参数结构体
class ModifyVpnGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVpnGatewayRoutes请求参数结构体
class ModifyVpnGatewayRoutesRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: Vpn网关id
# @type VpnGatewayId: String
# @param Routes: 路由修改参数
# @type Routes: Array
attr_accessor :VpnGatewayId, :Routes
def initialize(vpngatewayid=nil, routes=nil)
@VpnGatewayId = vpngatewayid
@Routes = routes
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngatewayroutemodify_tmp = VpnGatewayRouteModify.new
vpngatewayroutemodify_tmp.deserialize(i)
@Routes << vpngatewayroutemodify_tmp
end
end
end
end
# ModifyVpnGatewayRoutes返回参数结构体
class ModifyVpnGatewayRoutesResponse < TencentCloud::Common::AbstractModel
# @param Routes: VPN路由信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Routes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Routes, :RequestId
def initialize(routes=nil, requestid=nil)
@Routes = routes
@RequestId = requestid
end
def deserialize(params)
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
vpngatewayroute_tmp = VpnGatewayRoute.new
vpngatewayroute_tmp.deserialize(i)
@Routes << vpngatewayroute_tmp
end
end
@RequestId = params['RequestId']
end
end
# 查询nat路由的返回路由对象
class NatDirectConnectGatewayRoute < TencentCloud::Common::AbstractModel
# @param DestinationCidrBlock: 子网的 `IPv4` `CIDR`
# @type DestinationCidrBlock: String
# @param GatewayType: 下一跳网关的类型，目前此接口支持的类型有：
# DIRECTCONNECT：专线网关
# @type GatewayType: String
# @param GatewayId: 下一跳网关ID
# @type GatewayId: String
# @param CreateTime: 路由的创建时间
# @type CreateTime: String
# @param UpdateTime: 路由的更新时间
# @type UpdateTime: String
attr_accessor :DestinationCidrBlock, :GatewayType, :GatewayId, :CreateTime, :UpdateTime
def initialize(destinationcidrblock=nil, gatewaytype=nil, gatewayid=nil, createtime=nil, updatetime=nil)
@DestinationCidrBlock = destinationcidrblock
@GatewayType = gatewaytype
@GatewayId = gatewayid
@CreateTime = createtime
@UpdateTime = updatetime
end
def deserialize(params)
@DestinationCidrBlock = params['DestinationCidrBlock']
@GatewayType = params['GatewayType']
@GatewayId = params['GatewayId']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
end
end
# NAT网关对象。
class NatGateway < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关的ID。
# @type NatGatewayId: String
# @param NatGatewayName: NAT网关的名称。
# @type NatGatewayName: String
# @param CreatedTime: NAT网关创建的时间。
# @type CreatedTime: String
# @param State: NAT网关的状态。
# 'PENDING'：生产中，'DELETING'：删除中，'AVAILABLE'：运行中，'UPDATING'：升级中，
# ‘FAILED’：失败。
# @type State: String
# @param InternetMaxBandwidthOut: 网关最大外网出带宽(单位:Mbps)。
# @type InternetMaxBandwidthOut: Integer
# @param MaxConcurrentConnection: 网关并发连接上限。
# @type MaxConcurrentConnection: Integer
# @param PublicIpAddressSet: 绑定NAT网关的公网IP对象数组。
# @type PublicIpAddressSet: Array
# @param NetworkState: NAT网关网络状态。“AVAILABLE”:运行中, “UNAVAILABLE”:不可用, “INSUFFICIENT”:欠费停服。
# @type NetworkState: String
# @param DestinationIpPortTranslationNatRuleSet: NAT网关的端口转发规则。
# @type DestinationIpPortTranslationNatRuleSet: Array
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param Zone: NAT网关所在的可用区。
# @type Zone: String
# @param DirectConnectGatewayIds: 绑定的专线网关ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DirectConnectGatewayIds: Array
# @param SubnetId: 所属子网ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetId: String
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param SecurityGroupSet: NAT网关绑定的安全组列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityGroupSet: Array
# @param SourceIpTranslationNatRuleSet: NAT网关的SNAT转发规则。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SourceIpTranslationNatRuleSet: Array
# @param IsExclusive: 是否独享型NAT。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsExclusive: Boolean
# @param ExclusiveGatewayBandwidth: 独享型NAT所在的网关集群的带宽(单位:Mbps)，当IsExclusive为false时无此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExclusiveGatewayBandwidth: Integer
attr_accessor :NatGatewayId, :NatGatewayName, :CreatedTime, :State, :InternetMaxBandwidthOut, :MaxConcurrentConnection, :PublicIpAddressSet, :NetworkState, :DestinationIpPortTranslationNatRuleSet, :VpcId, :Zone, :DirectConnectGatewayIds, :SubnetId, :TagSet, :SecurityGroupSet, :SourceIpTranslationNatRuleSet, :IsExclusive, :ExclusiveGatewayBandwidth
def initialize(natgatewayid=nil, natgatewayname=nil, createdtime=nil, state=nil, internetmaxbandwidthout=nil, maxconcurrentconnection=nil, publicipaddressset=nil, networkstate=nil, destinationipporttranslationnatruleset=nil, vpcid=nil, zone=nil, directconnectgatewayids=nil, subnetid=nil, tagset=nil, securitygroupset=nil, sourceiptranslationnatruleset=nil, isexclusive=nil, exclusivegatewaybandwidth=nil)
@NatGatewayId = natgatewayid
@NatGatewayName = natgatewayname
@CreatedTime = createdtime
@State = state
@InternetMaxBandwidthOut = internetmaxbandwidthout
@MaxConcurrentConnection = maxconcurrentconnection
@PublicIpAddressSet = publicipaddressset
@NetworkState = networkstate
@DestinationIpPortTranslationNatRuleSet = destinationipporttranslationnatruleset
@VpcId = vpcid
@Zone = zone
@DirectConnectGatewayIds = directconnectgatewayids
@SubnetId = subnetid
@TagSet = tagset
@SecurityGroupSet = securitygroupset
@SourceIpTranslationNatRuleSet = sourceiptranslationnatruleset
@IsExclusive = isexclusive
@ExclusiveGatewayBandwidth = exclusivegatewaybandwidth
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@NatGatewayName = params['NatGatewayName']
@CreatedTime = params['CreatedTime']
@State = params['State']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@MaxConcurrentConnection = params['MaxConcurrentConnection']
unless params['PublicIpAddressSet'].nil?
@PublicIpAddressSet = []
params['PublicIpAddressSet'].each do |i|
natgatewayaddress_tmp = NatGatewayAddress.new
natgatewayaddress_tmp.deserialize(i)
@PublicIpAddressSet << natgatewayaddress_tmp
end
end
@NetworkState = params['NetworkState']
unless params['DestinationIpPortTranslationNatRuleSet'].nil?
@DestinationIpPortTranslationNatRuleSet = []
params['DestinationIpPortTranslationNatRuleSet'].each do |i|
destinationipporttranslationnatrule_tmp = DestinationIpPortTranslationNatRule.new
destinationipporttranslationnatrule_tmp.deserialize(i)
@DestinationIpPortTranslationNatRuleSet << destinationipporttranslationnatrule_tmp
end
end
@VpcId = params['VpcId']
@Zone = params['Zone']
@DirectConnectGatewayIds = params['DirectConnectGatewayIds']
@SubnetId = params['SubnetId']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@SecurityGroupSet = params['SecurityGroupSet']
unless params['SourceIpTranslationNatRuleSet'].nil?
@SourceIpTranslationNatRuleSet = []
params['SourceIpTranslationNatRuleSet'].each do |i|
sourceiptranslationnatrule_tmp = SourceIpTranslationNatRule.new
sourceiptranslationnatrule_tmp.deserialize(i)
@SourceIpTranslationNatRuleSet << sourceiptranslationnatrule_tmp
end
end
@IsExclusive = params['IsExclusive']
@ExclusiveGatewayBandwidth = params['ExclusiveGatewayBandwidth']
end
end
# NAT网关绑定的弹性IP
class NatGatewayAddress < TencentCloud::Common::AbstractModel
# @param AddressId: 弹性公网IP（EIP）的唯一 ID，形如：`eip-11112222`。
# @type AddressId: String
# @param PublicIpAddress: 外网IP地址，形如：`123.121.34.33`。
# @type PublicIpAddress: String
# @param IsBlocked: 资源封堵状态。true表示弹性ip处于封堵状态，false表示弹性ip处于未封堵状态。
# @type IsBlocked: Boolean
attr_accessor :AddressId, :PublicIpAddress, :IsBlocked
def initialize(addressid=nil, publicipaddress=nil, isblocked=nil)
@AddressId = addressid
@PublicIpAddress = publicipaddress
@IsBlocked = isblocked
end
def deserialize(params)
@AddressId = params['AddressId']
@PublicIpAddress = params['PublicIpAddress']
@IsBlocked = params['IsBlocked']
end
end
# NAT网关的端口转发规则
class NatGatewayDestinationIpPortTranslationNatRule < TencentCloud::Common::AbstractModel
# @param IpProtocol: 网络协议，可选值：`TCP`、`UDP`。
# @type IpProtocol: String
# @param PublicIpAddress: 弹性IP。
# @type PublicIpAddress: String
# @param PublicPort: 公网端口。
# @type PublicPort: Integer
# @param PrivateIpAddress: 内网地址。
# @type PrivateIpAddress: String
# @param PrivatePort: 内网端口。
# @type PrivatePort: Integer
# @param Description: NAT网关转发规则描述。
# @type Description: String
# @param NatGatewayId: NAT网关的ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NatGatewayId: String
# @param VpcId: 私有网络VPC的ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcId: String
# @param CreatedTime: NAT网关转发规则创建时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
attr_accessor :IpProtocol, :PublicIpAddress, :PublicPort, :PrivateIpAddress, :PrivatePort, :Description, :NatGatewayId, :VpcId, :CreatedTime
def initialize(ipprotocol=nil, publicipaddress=nil, publicport=nil, privateipaddress=nil, privateport=nil, description=nil, natgatewayid=nil, vpcid=nil, createdtime=nil)
@IpProtocol = ipprotocol
@PublicIpAddress = publicipaddress
@PublicPort = publicport
@PrivateIpAddress = privateipaddress
@PrivatePort = privateport
@Description = description
@NatGatewayId = natgatewayid
@VpcId = vpcid
@CreatedTime = createdtime
end
def deserialize(params)
@IpProtocol = params['IpProtocol']
@PublicIpAddress = params['PublicIpAddress']
@PublicPort = params['PublicPort']
@PrivateIpAddress = params['PrivateIpAddress']
@PrivatePort = params['PrivatePort']
@Description = params['Description']
@NatGatewayId = params['NatGatewayId']
@VpcId = params['VpcId']
@CreatedTime = params['CreatedTime']
end
end
# 网络探测对象。
class NetDetect < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。形如：`vpc-12345678`
# @type VpcId: String
# @param VpcName: `VPC`实例名称。
# @type VpcName: String
# @param SubnetId: 子网实例ID。形如：subnet-12345678。
# @type SubnetId: String
# @param SubnetName: 子网实例名称。
# @type SubnetName: String
# @param NetDetectId: 网络探测实例ID。形如：netd-12345678。
# @type NetDetectId: String
# @param NetDetectName: 网络探测名称，最大长度不能超过60个字节。
# @type NetDetectName: String
# @param DetectDestinationIp: 探测目的IPv4地址数组，最多两个。
# @type DetectDestinationIp: Array
# @param DetectSourceIp: 系统自动分配的探测源IPv4数组。长度为2。
# @type DetectSourceIp: Array
# @param NextHopType: 下一跳类型，目前我们支持的类型有：
# VPN：VPN网关；
# DIRECTCONNECT：专线网关；
# PEERCONNECTION：对等连接；
# NAT：NAT网关；
# NORMAL_CVM：普通云服务器；
# CCN：云联网网关；
# @type NextHopType: String
# @param NextHopDestination: 下一跳目的网关，取值与“下一跳类型”相关：
# 下一跳类型为VPN，取值VPN网关ID，形如：vpngw-12345678；
# 下一跳类型为DIRECTCONNECT，取值专线网关ID，形如：dcg-12345678；
# 下一跳类型为PEERCONNECTION，取值对等连接ID，形如：pcx-12345678；
# 下一跳类型为NAT，取值Nat网关，形如：nat-12345678；
# 下一跳类型为NORMAL_CVM，取值云服务器IPv4地址，形如：10.0.0.12；
# 下一跳类型为CCN，取值云联网网关，形如：ccn-12345678；
# @type NextHopDestination: String
# @param NextHopName: 下一跳网关名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NextHopName: String
# @param NetDetectDescription: 网络探测描述。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetDetectDescription: String
# @param CreateTime: 创建时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreateTime: String
attr_accessor :VpcId, :VpcName, :SubnetId, :SubnetName, :NetDetectId, :NetDetectName, :DetectDestinationIp, :DetectSourceIp, :NextHopType, :NextHopDestination, :NextHopName, :NetDetectDescription, :CreateTime
def initialize(vpcid=nil, vpcname=nil, subnetid=nil, subnetname=nil, netdetectid=nil, netdetectname=nil, detectdestinationip=nil, detectsourceip=nil, nexthoptype=nil, nexthopdestination=nil, nexthopname=nil, netdetectdescription=nil, createtime=nil)
@VpcId = vpcid
@VpcName = vpcname
@SubnetId = subnetid
@SubnetName = subnetname
@NetDetectId = netdetectid
@NetDetectName = netdetectname
@DetectDestinationIp = detectdestinationip
@DetectSourceIp = detectsourceip
@NextHopType = nexthoptype
@NextHopDestination = nexthopdestination
@NextHopName = nexthopname
@NetDetectDescription = netdetectdescription
@CreateTime = createtime
end
def deserialize(params)
@VpcId = params['VpcId']
@VpcName = params['VpcName']
@SubnetId = params['SubnetId']
@SubnetName = params['SubnetName']
@NetDetectId = params['NetDetectId']
@NetDetectName = params['NetDetectName']
@DetectDestinationIp = params['DetectDestinationIp']
@DetectSourceIp = params['DetectSourceIp']
@NextHopType = params['NextHopType']
@NextHopDestination = params['NextHopDestination']
@NextHopName = params['NextHopName']
@NetDetectDescription = params['NetDetectDescription']
@CreateTime = params['CreateTime']
end
end
# 网络探测目的IP的验证结果。
class NetDetectIpState < TencentCloud::Common::AbstractModel
# @param DetectDestinationIp: 探测目的IPv4地址。
# @type DetectDestinationIp: String
# @param State: 探测结果。
# 0：成功；
# -1：查询不到路由丢包；
# -2：外出ACL丢包；
# -3：IN ACL丢包；
# -4：其他错误；
# @type State: Integer
# @param Delay: 时延，单位毫秒
# @type Delay: Integer
# @param PacketLossRate: 丢包率
# @type PacketLossRate: Integer
attr_accessor :DetectDestinationIp, :State, :Delay, :PacketLossRate
def initialize(detectdestinationip=nil, state=nil, delay=nil, packetlossrate=nil)
@DetectDestinationIp = detectdestinationip
@State = state
@Delay = delay
@PacketLossRate = packetlossrate
end
def deserialize(params)
@DetectDestinationIp = params['DetectDestinationIp']
@State = params['State']
@Delay = params['Delay']
@PacketLossRate = params['PacketLossRate']
end
end
# 网络探测验证结果。
class NetDetectState < TencentCloud::Common::AbstractModel
# @param NetDetectId: 网络探测实例ID。形如：netd-12345678。
# @type NetDetectId: String
# @param NetDetectIpStateSet: 网络探测目的IP验证结果对象数组。
# @type NetDetectIpStateSet: Array
attr_accessor :NetDetectId, :NetDetectIpStateSet
def initialize(netdetectid=nil, netdetectipstateset=nil)
@NetDetectId = netdetectid
@NetDetectIpStateSet = netdetectipstateset
end
def deserialize(params)
@NetDetectId = params['NetDetectId']
unless params['NetDetectIpStateSet'].nil?
@NetDetectIpStateSet = []
params['NetDetectIpStateSet'].each do |i|
netdetectipstate_tmp = NetDetectIpState.new
netdetectipstate_tmp.deserialize(i)
@NetDetectIpStateSet << netdetectipstate_tmp
end
end
end
end
# 网络ACL
class NetworkAcl < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。
# @type VpcId: String
# @param NetworkAclId: 网络ACL实例`ID`。
# @type NetworkAclId: String
# @param NetworkAclName: 网络ACL名称，最大长度为60。
# @type NetworkAclName: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param SubnetSet: 网络ACL关联的子网数组。
# @type SubnetSet: Array
# @param IngressEntries: 网络ACl入站规则。
# @type IngressEntries: Array
# @param EgressEntries: 网络ACL出站规则。
# @type EgressEntries: Array
attr_accessor :VpcId, :NetworkAclId, :NetworkAclName, :CreatedTime, :SubnetSet, :IngressEntries, :EgressEntries
def initialize(vpcid=nil, networkaclid=nil, networkaclname=nil, createdtime=nil, subnetset=nil, ingressentries=nil, egressentries=nil)
@VpcId = vpcid
@NetworkAclId = networkaclid
@NetworkAclName = networkaclname
@CreatedTime = createdtime
@SubnetSet = subnetset
@IngressEntries = ingressentries
@EgressEntries = egressentries
end
def deserialize(params)
@VpcId = params['VpcId']
@NetworkAclId = params['NetworkAclId']
@NetworkAclName = params['NetworkAclName']
@CreatedTime = params['CreatedTime']
unless params['SubnetSet'].nil?
@SubnetSet = []
params['SubnetSet'].each do |i|
subnet_tmp = Subnet.new
subnet_tmp.deserialize(i)
@SubnetSet << subnet_tmp
end
end
unless params['IngressEntries'].nil?
@IngressEntries = []
params['IngressEntries'].each do |i|
networkaclentry_tmp = NetworkAclEntry.new
networkaclentry_tmp.deserialize(i)
@IngressEntries << networkaclentry_tmp
end
end
unless params['EgressEntries'].nil?
@EgressEntries = []
params['EgressEntries'].each do |i|
networkaclentry_tmp = NetworkAclEntry.new
networkaclentry_tmp.deserialize(i)
@EgressEntries << networkaclentry_tmp
end
end
end
end
# 网络ACL规则。
class NetworkAclEntry < TencentCloud::Common::AbstractModel
# @param ModifyTime: 修改时间。
# @type ModifyTime: String
# @param Protocol: 协议, 取值: TCP,UDP, ICMP, ALL。
# @type Protocol: String
# @param Port: 端口(all, 单个port, range)。当Protocol为ALL或ICMP时，不能指定Port。
# @type Port: String
# @param CidrBlock: 网段或IP(互斥)。
# @type CidrBlock: String
# @param Ipv6CidrBlock: 网段或IPv6(互斥)。
# @type Ipv6CidrBlock: String
# @param Action: ACCEPT 或 DROP。
# @type Action: String
# @param Description: 规则描述，最大长度100。
# @type Description: String
attr_accessor :ModifyTime, :Protocol, :Port, :CidrBlock, :Ipv6CidrBlock, :Action, :Description
def initialize(modifytime=nil, protocol=nil, port=nil, cidrblock=nil, ipv6cidrblock=nil, action=nil, description=nil)
@ModifyTime = modifytime
@Protocol = protocol
@Port = port
@CidrBlock = cidrblock
@Ipv6CidrBlock = ipv6cidrblock
@Action = action
@Description = description
end
def deserialize(params)
@ModifyTime = params['ModifyTime']
@Protocol = params['Protocol']
@Port = params['Port']
@CidrBlock = params['CidrBlock']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
@Action = params['Action']
@Description = params['Description']
end
end
# 网络ACL规则集合
class NetworkAclEntrySet < TencentCloud::Common::AbstractModel
# @param Ingress: 入站规则。
# @type Ingress: Array
# @param Egress: 出站规则。
# @type Egress: Array
attr_accessor :Ingress, :Egress
def initialize(ingress=nil, egress=nil)
@Ingress = ingress
@Egress = egress
end
def deserialize(params)
unless params['Ingress'].nil?
@Ingress = []
params['Ingress'].each do |i|
networkaclentry_tmp = NetworkAclEntry.new
networkaclentry_tmp.deserialize(i)
@Ingress << networkaclentry_tmp
end
end
unless params['Egress'].nil?
@Egress = []
params['Egress'].each do |i|
networkaclentry_tmp = NetworkAclEntry.new
networkaclentry_tmp.deserialize(i)
@Egress << networkaclentry_tmp
end
end
end
end
# 弹性网卡
class NetworkInterface < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-f1xjkw1b。
# @type NetworkInterfaceId: String
# @param NetworkInterfaceName: 弹性网卡名称。
# @type NetworkInterfaceName: String
# @param NetworkInterfaceDescription: 弹性网卡描述。
# @type NetworkInterfaceDescription: String
# @param SubnetId: 子网实例ID。
# @type SubnetId: String
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param GroupSet: 绑定的安全组。
# @type GroupSet: Array
# @param Primary: 是否是主网卡。
# @type Primary: Boolean
# @param MacAddress: MAC地址。
# @type MacAddress: String
# @param State: 弹性网卡状态：
# `PENDING`：创建中
# `AVAILABLE`：可用的
# `ATTACHING`：绑定中
# `DETACHING`：解绑中
# `DELETING`：删除中
# @type State: String
# @param PrivateIpAddressSet: 内网IP信息。
# @type PrivateIpAddressSet: Array
# @param Attachment: 绑定的云服务器对象。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Attachment: :class:`Tencentcloud::Vpc.v20170312.models.NetworkInterfaceAttachment`
# @param Zone: 可用区。
# @type Zone: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param Ipv6AddressSet: `IPv6`地址列表。
# @type Ipv6AddressSet: Array
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param EniType: 网卡类型。0 - 弹性网卡；1 - evm弹性网卡。
# @type EniType: Integer
# @param Business: 网卡绑定的子机类型：cvm，eks。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Business: String
# @param CdcId: 网卡所关联的CDC实例ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CdcId: String
# @param AttachType: 弹性网卡类型：0:标准型/1:扩展型。默认值为0。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AttachType: Integer
attr_accessor :NetworkInterfaceId, :NetworkInterfaceName, :NetworkInterfaceDescription, :SubnetId, :VpcId, :GroupSet, :Primary, :MacAddress, :State, :PrivateIpAddressSet, :Attachment, :Zone, :CreatedTime, :Ipv6AddressSet, :TagSet, :EniType, :Business, :CdcId, :AttachType
def initialize(networkinterfaceid=nil, networkinterfacename=nil, networkinterfacedescription=nil, subnetid=nil, vpcid=nil, groupset=nil, primary=nil, macaddress=nil, state=nil, privateipaddressset=nil, attachment=nil, zone=nil, createdtime=nil, ipv6addressset=nil, tagset=nil, enitype=nil, business=nil, cdcid=nil, attachtype=nil)
@NetworkInterfaceId = networkinterfaceid
@NetworkInterfaceName = networkinterfacename
@NetworkInterfaceDescription = networkinterfacedescription
@SubnetId = subnetid
@VpcId = vpcid
@GroupSet = groupset
@Primary = primary
@MacAddress = macaddress
@State = state
@PrivateIpAddressSet = privateipaddressset
@Attachment = attachment
@Zone = zone
@CreatedTime = createdtime
@Ipv6AddressSet = ipv6addressset
@TagSet = tagset
@EniType = enitype
@Business = business
@CdcId = cdcid
@AttachType = attachtype
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
@NetworkInterfaceName = params['NetworkInterfaceName']
@NetworkInterfaceDescription = params['NetworkInterfaceDescription']
@SubnetId = params['SubnetId']
@VpcId = params['VpcId']
@GroupSet = params['GroupSet']
@Primary = params['Primary']
@MacAddress = params['MacAddress']
@State = params['State']
unless params['PrivateIpAddressSet'].nil?
@PrivateIpAddressSet = []
params['PrivateIpAddressSet'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddressSet << privateipaddressspecification_tmp
end
end
unless params['Attachment'].nil?
@Attachment = NetworkInterfaceAttachment.new
@Attachment.deserialize(params['Attachment'])
end
@Zone = params['Zone']
@CreatedTime = params['CreatedTime']
unless params['Ipv6AddressSet'].nil?
@Ipv6AddressSet = []
params['Ipv6AddressSet'].each do |i|
ipv6address_tmp = Ipv6Address.new
ipv6address_tmp.deserialize(i)
@Ipv6AddressSet << ipv6address_tmp
end
end
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@EniType = params['EniType']
@Business = params['Business']
@CdcId = params['CdcId']
@AttachType = params['AttachType']
end
end
# 弹性网卡绑定关系
class NetworkInterfaceAttachment < TencentCloud::Common::AbstractModel
# @param InstanceId: 云主机实例ID。
# @type InstanceId: String
# @param DeviceIndex: 网卡在云主机实例内的序号。
# @type DeviceIndex: Integer
# @param InstanceAccountId: 云主机所有者账户信息。
# @type InstanceAccountId: String
# @param AttachTime: 绑定时间。
# @type AttachTime: String
attr_accessor :InstanceId, :DeviceIndex, :InstanceAccountId, :AttachTime
def initialize(instanceid=nil, deviceindex=nil, instanceaccountid=nil, attachtime=nil)
@InstanceId = instanceid
@DeviceIndex = deviceindex
@InstanceAccountId = instanceaccountid
@AttachTime = attachtime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DeviceIndex = params['DeviceIndex']
@InstanceAccountId = params['InstanceAccountId']
@AttachTime = params['AttachTime']
end
end
# NotifyRoutes请求参数结构体
class NotifyRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表唯一ID。
# @type RouteTableId: String
# @param RouteItemIds: 路由策略唯一ID。
# @type RouteItemIds: Array
attr_accessor :RouteTableId, :RouteItemIds
def initialize(routetableid=nil, routeitemids=nil)
@RouteTableId = routetableid
@RouteItemIds = routeitemids
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteItemIds = params['RouteItemIds']
end
end
# NotifyRoutes返回参数结构体
class NotifyRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 价格
class Price < TencentCloud::Common::AbstractModel
# @param InstancePrice: 实例价格。
# @type InstancePrice: :class:`Tencentcloud::Vpc.v20170312.models.ItemPrice`
# @param BandwidthPrice: 网络价格。
# @type BandwidthPrice: :class:`Tencentcloud::Vpc.v20170312.models.ItemPrice`
attr_accessor :InstancePrice, :BandwidthPrice
def initialize(instanceprice=nil, bandwidthprice=nil)
@InstancePrice = instanceprice
@BandwidthPrice = bandwidthprice
end
def deserialize(params)
unless params['InstancePrice'].nil?
@InstancePrice = ItemPrice.new
@InstancePrice.deserialize(params['InstancePrice'])
end
unless params['BandwidthPrice'].nil?
@BandwidthPrice = ItemPrice.new
@BandwidthPrice.deserialize(params['BandwidthPrice'])
end
end
end
# 内网IP信息
class PrivateIpAddressSpecification < TencentCloud::Common::AbstractModel
# @param PrivateIpAddress: 内网IP地址。
# @type PrivateIpAddress: String
# @param Primary: 是否是主IP。
# @type Primary: Boolean
# @param PublicIpAddress: 公网IP地址。
# @type PublicIpAddress: String
# @param AddressId: EIP实例ID，例如：eip-11112222。
# @type AddressId: String
# @param Description: 内网IP描述信息。
# @type Description: String
# @param IsWanIpBlocked: 公网IP是否被封堵。
# @type IsWanIpBlocked: Boolean
# @param State: IP状态：
# PENDING：生产中
# MIGRATING：迁移中
# DELETING：删除中
# AVAILABLE：可用的
# @type State: String
attr_accessor :PrivateIpAddress, :Primary, :PublicIpAddress, :AddressId, :Description, :IsWanIpBlocked, :State
def initialize(privateipaddress=nil, primary=nil, publicipaddress=nil, addressid=nil, description=nil, iswanipblocked=nil, state=nil)
@PrivateIpAddress = privateipaddress
@Primary = primary
@PublicIpAddress = publicipaddress
@AddressId = addressid
@Description = description
@IsWanIpBlocked = iswanipblocked
@State = state
end
def deserialize(params)
@PrivateIpAddress = params['PrivateIpAddress']
@Primary = params['Primary']
@PublicIpAddress = params['PublicIpAddress']
@AddressId = params['AddressId']
@Description = params['Description']
@IsWanIpBlocked = params['IsWanIpBlocked']
@State = params['State']
end
end
# 描述网络中心每个产品的配额信息
class ProductQuota < TencentCloud::Common::AbstractModel
# @param QuotaId: 产品配额ID
# @type QuotaId: String
# @param QuotaName: 产品配额名称
# @type QuotaName: String
# @param QuotaCurrent: 产品当前配额
# @type QuotaCurrent: Integer
# @param QuotaLimit: 产品配额上限
# @type QuotaLimit: Integer
# @param QuotaRegion: 产品配额是否有地域属性
# @type QuotaRegion: Boolean
attr_accessor :QuotaId, :QuotaName, :QuotaCurrent, :QuotaLimit, :QuotaRegion
def initialize(quotaid=nil, quotaname=nil, quotacurrent=nil, quotalimit=nil, quotaregion=nil)
@QuotaId = quotaid
@QuotaName = quotaname
@QuotaCurrent = quotacurrent
@QuotaLimit = quotalimit
@QuotaRegion = quotaregion
end
def deserialize(params)
@QuotaId = params['QuotaId']
@QuotaName = params['QuotaName']
@QuotaCurrent = params['QuotaCurrent']
@QuotaLimit = params['QuotaLimit']
@QuotaRegion = params['QuotaRegion']
end
end
# 描述配额信息
class Quota < TencentCloud::Common::AbstractModel
# @param QuotaId: 配额名称，取值范围：
`TOTAL_EIP_QUOTA`：用户当前地域下EIP的配额数；
`DAILY_EIP_APPLY`：用户当前地域下今日申购次数；
`DAILY_PUBLIC_IP_ASSIGN`：用户当前地域下，重新分配公网 IP次数。
# @type QuotaId: String
# @param QuotaCurrent: 当前数量
# @type QuotaCurrent: Integer
# @param QuotaLimit: 配额数量
# @type QuotaLimit: Integer
attr_accessor :QuotaId, :QuotaCurrent, :QuotaLimit
def initialize(quotaid=nil, quotacurrent=nil, quotalimit=nil)
@QuotaId = quotaid
@QuotaCurrent = quotacurrent
@QuotaLimit = quotalimit
end
def deserialize(params)
@QuotaId = params['QuotaId']
@QuotaCurrent = params['QuotaCurrent']
@QuotaLimit = params['QuotaLimit']
end
end
# 安全组被引用信息
class ReferredSecurityGroup < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID。
# @type SecurityGroupId: String
# @param ReferredSecurityGroupIds: 引用安全组实例ID（SecurityGroupId）的所有安全组实例ID。
# @type ReferredSecurityGroupIds: Array
attr_accessor :SecurityGroupId, :ReferredSecurityGroupIds
def initialize(securitygroupid=nil, referredsecuritygroupids=nil)
@SecurityGroupId = securitygroupid
@ReferredSecurityGroupIds = referredsecuritygroupids
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
@ReferredSecurityGroupIds = params['ReferredSecurityGroupIds']
end
end
# RefreshDirectConnectGatewayRouteToNatGateway请求参数结构体
class RefreshDirectConnectGatewayRouteToNatGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpcId: vpc的ID
# @type VpcId: String
# @param NatGatewayId: NAT网关ID
# @type NatGatewayId: String
# @param DryRun: 是否是预刷新；True:是， False:否
# @type DryRun: Boolean
attr_accessor :VpcId, :NatGatewayId, :DryRun
def initialize(vpcid=nil, natgatewayid=nil, dryrun=nil)
@VpcId = vpcid
@NatGatewayId = natgatewayid
@DryRun = dryrun
end
def deserialize(params)
@VpcId = params['VpcId']
@NatGatewayId = params['NatGatewayId']
@DryRun = params['DryRun']
end
end
# RefreshDirectConnectGatewayRouteToNatGateway返回参数结构体
class RefreshDirectConnectGatewayRouteToNatGatewayResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectSubnetSet: IDC子网信息
# @type DirectConnectSubnetSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectSubnetSet, :RequestId
def initialize(directconnectsubnetset=nil, requestid=nil)
@DirectConnectSubnetSet = directconnectsubnetset
@RequestId = requestid
end
def deserialize(params)
unless params['DirectConnectSubnetSet'].nil?
@DirectConnectSubnetSet = []
params['DirectConnectSubnetSet'].each do |i|
directconnectsubnet_tmp = DirectConnectSubnet.new
directconnectsubnet_tmp.deserialize(i)
@DirectConnectSubnetSet << directconnectsubnet_tmp
end
end
@RequestId = params['RequestId']
end
end
# RejectAttachCcnInstances请求参数结构体
class RejectAttachCcnInstancesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param Instances: 拒绝关联实例列表。
# @type Instances: Array
attr_accessor :CcnId, :Instances
def initialize(ccnid=nil, instances=nil)
@CcnId = ccnid
@Instances = instances
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
end
end
# RejectAttachCcnInstances返回参数结构体
class RejectAttachCcnInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ReleaseAddresses请求参数结构体
class ReleaseAddressesRequest < TencentCloud::Common::AbstractModel
# @param AddressIds: 标识 EIP 的唯一 ID 列表。EIP 唯一 ID 形如：`eip-11112222`。
# @type AddressIds: Array
attr_accessor :AddressIds
def initialize(addressids=nil)
@AddressIds = addressids
end
def deserialize(params)
@AddressIds = params['AddressIds']
end
end
# ReleaseAddresses返回参数结构体
class ReleaseAddressesResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ReleaseIp6AddressesBandwidth请求参数结构体
class ReleaseIp6AddressesBandwidthRequest < TencentCloud::Common::AbstractModel
# @param Ip6Addresses: IPV6地址。Ip6Addresses和Ip6AddressIds必须且只能传一个
# @type Ip6Addresses: Array
# @param Ip6AddressIds: IPV6地址对应的唯一ID，形如eip-xxxxxxxx。Ip6Addresses和Ip6AddressIds必须且只能传一个。
# @type Ip6AddressIds: Array
attr_accessor :Ip6Addresses, :Ip6AddressIds
def initialize(ip6addresses=nil, ip6addressids=nil)
@Ip6Addresses = ip6addresses
@Ip6AddressIds = ip6addressids
end
def deserialize(params)
@Ip6Addresses = params['Ip6Addresses']
@Ip6AddressIds = params['Ip6AddressIds']
end
end
# ReleaseIp6AddressesBandwidth返回参数结构体
class ReleaseIp6AddressesBandwidthResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 异步任务TaskId。可以使用[DescribeTaskResult](https://cloud.tencent.com/document/api/215/36271)接口查询任务状态。
# @type TaskId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# RemoveBandwidthPackageResources请求参数结构体
class RemoveBandwidthPackageResourcesRequest < TencentCloud::Common::AbstractModel
# @param BandwidthPackageId: 带宽包唯一标识ID，形如'bwp-xxxx'
# @type BandwidthPackageId: String
# @param ResourceType: 资源类型，包括‘Address’, ‘LoadBalance’
# @type ResourceType: String
# @param ResourceIds: 资源ID，可支持资源形如'eip-xxxx', 'lb-xxxx'
# @type ResourceIds: Array
attr_accessor :BandwidthPackageId, :ResourceType, :ResourceIds
def initialize(bandwidthpackageid=nil, resourcetype=nil, resourceids=nil)
@BandwidthPackageId = bandwidthpackageid
@ResourceType = resourcetype
@ResourceIds = resourceids
end
def deserialize(params)
@BandwidthPackageId = params['BandwidthPackageId']
@ResourceType = params['ResourceType']
@ResourceIds = params['ResourceIds']
end
end
# RemoveBandwidthPackageResources返回参数结构体
class RemoveBandwidthPackageResourcesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RemoveIp6Rules请求参数结构体
class RemoveIp6RulesRequest < TencentCloud::Common::AbstractModel
# @param Ip6TranslatorId: IPV6转换规则所属的转换实例唯一ID，形如ip6-xxxxxxxx
# @type Ip6TranslatorId: String
# @param Ip6RuleIds: 待删除IPV6转换规则，形如rule6-xxxxxxxx
# @type Ip6RuleIds: Array
attr_accessor :Ip6TranslatorId, :Ip6RuleIds
def initialize(ip6translatorid=nil, ip6ruleids=nil)
@Ip6TranslatorId = ip6translatorid
@Ip6RuleIds = ip6ruleids
end
def deserialize(params)
@Ip6TranslatorId = params['Ip6TranslatorId']
@Ip6RuleIds = params['Ip6RuleIds']
end
end
# RemoveIp6Rules返回参数结构体
class RemoveIp6RulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RenewAddresses请求参数结构体
class RenewAddressesRequest < TencentCloud::Common::AbstractModel
# @param AddressIds: EIP唯一标识ID列表，形如'eip-xxxx'
# @type AddressIds: Array
# @param AddressChargePrepaid: 续费参数
# @type AddressChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.AddressChargePrepaid`
attr_accessor :AddressIds, :AddressChargePrepaid
def initialize(addressids=nil, addresschargeprepaid=nil)
@AddressIds = addressids
@AddressChargePrepaid = addresschargeprepaid
end
def deserialize(params)
@AddressIds = params['AddressIds']
unless params['AddressChargePrepaid'].nil?
@AddressChargePrepaid = AddressChargePrepaid.new
@AddressChargePrepaid.deserialize(params['AddressChargePrepaid'])
end
end
end
# RenewAddresses返回参数结构体
class RenewAddressesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RenewVpnGateway请求参数结构体
class RenewVpnGatewayRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param InstanceChargePrepaid: 预付费计费模式。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Vpc.v20170312.models.InstanceChargePrepaid`
attr_accessor :VpnGatewayId, :InstanceChargePrepaid
def initialize(vpngatewayid=nil, instancechargeprepaid=nil)
@VpnGatewayId = vpngatewayid
@InstanceChargePrepaid = instancechargeprepaid
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
end
end
# RenewVpnGateway返回参数结构体
class RenewVpnGatewayResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ReplaceDirectConnectGatewayCcnRoutes请求参数结构体
class ReplaceDirectConnectGatewayCcnRoutesRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectGatewayId: 专线网关ID，形如：dcg-prpqlmg1
# @type DirectConnectGatewayId: String
# @param Routes: 需要连通的IDC网段列表
# @type Routes: Array
attr_accessor :DirectConnectGatewayId, :Routes
def initialize(directconnectgatewayid=nil, routes=nil)
@DirectConnectGatewayId = directconnectgatewayid
@Routes = routes
end
def deserialize(params)
@DirectConnectGatewayId = params['DirectConnectGatewayId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
directconnectgatewayccnroute_tmp = DirectConnectGatewayCcnRoute.new
directconnectgatewayccnroute_tmp.deserialize(i)
@Routes << directconnectgatewayccnroute_tmp
end
end
end
end
# ReplaceDirectConnectGatewayCcnRoutes返回参数结构体
class ReplaceDirectConnectGatewayCcnRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ReplaceRouteTableAssociation请求参数结构体
class ReplaceRouteTableAssociationRequest < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网实例ID，例如：subnet-3x5lf5q0。可通过DescribeSubnets接口查询。
# @type SubnetId: String
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
attr_accessor :SubnetId, :RouteTableId
def initialize(subnetid=nil, routetableid=nil)
@SubnetId = subnetid
@RouteTableId = routetableid
end
def deserialize(params)
@SubnetId = params['SubnetId']
@RouteTableId = params['RouteTableId']
end
end
# ReplaceRouteTableAssociation返回参数结构体
class ReplaceRouteTableAssociationResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ReplaceRoutes请求参数结构体
class ReplaceRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param Routes: 路由策略对象。需要指定路由策略ID（RouteId）。
# @type Routes: Array
attr_accessor :RouteTableId, :Routes
def initialize(routetableid=nil, routes=nil)
@RouteTableId = routetableid
@Routes = routes
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@Routes << route_tmp
end
end
end
end
# ReplaceRoutes返回参数结构体
class ReplaceRoutesResponse < TencentCloud::Common::AbstractModel
# @param OldRouteSet: 原路由策略信息。
# @type OldRouteSet: Array
# @param NewRouteSet: 修改后的路由策略信息。
# @type NewRouteSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :OldRouteSet, :NewRouteSet, :RequestId
def initialize(oldrouteset=nil, newrouteset=nil, requestid=nil)
@OldRouteSet = oldrouteset
@NewRouteSet = newrouteset
@RequestId = requestid
end
def deserialize(params)
unless params['OldRouteSet'].nil?
@OldRouteSet = []
params['OldRouteSet'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@OldRouteSet << route_tmp
end
end
unless params['NewRouteSet'].nil?
@NewRouteSet = []
params['NewRouteSet'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@NewRouteSet << route_tmp
end
end
@RequestId = params['RequestId']
end
end
# ReplaceSecurityGroupPolicy请求参数结构体
class ReplaceSecurityGroupPolicyRequest < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如sg-33ocnj9n，可通过DescribeSecurityGroups获取。
# @type SecurityGroupId: String
# @param SecurityGroupPolicySet: 安全组规则集合对象。
# @type SecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
# @param OriginalSecurityGroupPolicySet: 旧的安全组规则集合对象，可选，日志记录用。
# @type OriginalSecurityGroupPolicySet: :class:`Tencentcloud::Vpc.v20170312.models.SecurityGroupPolicySet`
attr_accessor :SecurityGroupId, :SecurityGroupPolicySet, :OriginalSecurityGroupPolicySet
def initialize(securitygroupid=nil, securitygrouppolicyset=nil, originalsecuritygrouppolicyset=nil)
@SecurityGroupId = securitygroupid
@SecurityGroupPolicySet = securitygrouppolicyset
@OriginalSecurityGroupPolicySet = originalsecuritygrouppolicyset
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
unless params['SecurityGroupPolicySet'].nil?
@SecurityGroupPolicySet = SecurityGroupPolicySet.new
@SecurityGroupPolicySet.deserialize(params['SecurityGroupPolicySet'])
end
unless params['OriginalSecurityGroupPolicySet'].nil?
@OriginalSecurityGroupPolicySet = SecurityGroupPolicySet.new
@OriginalSecurityGroupPolicySet.deserialize(params['OriginalSecurityGroupPolicySet'])
end
end
end
# ReplaceSecurityGroupPolicy返回参数结构体
class ReplaceSecurityGroupPolicyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetAttachCcnInstances请求参数结构体
class ResetAttachCcnInstancesRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param CcnUin: CCN所属UIN（根账号）。
# @type CcnUin: String
# @param Instances: 重新申请关联网络实例列表。
# @type Instances: Array
attr_accessor :CcnId, :CcnUin, :Instances
def initialize(ccnid=nil, ccnuin=nil, instances=nil)
@CcnId = ccnid
@CcnUin = ccnuin
@Instances = instances
end
def deserialize(params)
@CcnId = params['CcnId']
@CcnUin = params['CcnUin']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
ccninstance_tmp = CcnInstance.new
ccninstance_tmp.deserialize(i)
@Instances << ccninstance_tmp
end
end
end
end
# ResetAttachCcnInstances返回参数结构体
class ResetAttachCcnInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetNatGatewayConnection请求参数结构体
class ResetNatGatewayConnectionRequest < TencentCloud::Common::AbstractModel
# @param NatGatewayId: NAT网关ID。
# @type NatGatewayId: String
# @param MaxConcurrentConnection: NAT网关并发连接上限，形如：1000000、3000000、10000000。
# @type MaxConcurrentConnection: Integer
attr_accessor :NatGatewayId, :MaxConcurrentConnection
def initialize(natgatewayid=nil, maxconcurrentconnection=nil)
@NatGatewayId = natgatewayid
@MaxConcurrentConnection = maxconcurrentconnection
end
def deserialize(params)
@NatGatewayId = params['NatGatewayId']
@MaxConcurrentConnection = params['MaxConcurrentConnection']
end
end
# ResetNatGatewayConnection返回参数结构体
class ResetNatGatewayConnectionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetRoutes请求参数结构体
class ResetRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param RouteTableName: 路由表名称，最大长度不能超过60个字节。
# @type RouteTableName: String
# @param Routes: 路由策略。
# @type Routes: Array
attr_accessor :RouteTableId, :RouteTableName, :Routes
def initialize(routetableid=nil, routetablename=nil, routes=nil)
@RouteTableId = routetableid
@RouteTableName = routetablename
@Routes = routes
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteTableName = params['RouteTableName']
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@Routes << route_tmp
end
end
end
end
# ResetRoutes返回参数结构体
class ResetRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetVpnConnection请求参数结构体
class ResetVpnConnectionRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param VpnConnectionId: VPN通道实例ID。形如：vpnx-f49l6u0z。
# @type VpnConnectionId: String
attr_accessor :VpnGatewayId, :VpnConnectionId
def initialize(vpngatewayid=nil, vpnconnectionid=nil)
@VpnGatewayId = vpngatewayid
@VpnConnectionId = vpnconnectionid
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@VpnConnectionId = params['VpnConnectionId']
end
end
# ResetVpnConnection返回参数结构体
class ResetVpnConnectionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetVpnGatewayInternetMaxBandwidth请求参数结构体
class ResetVpnGatewayInternetMaxBandwidthRequest < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param InternetMaxBandwidthOut: 公网带宽设置。可选带宽规格：5, 10, 20, 50, 100；单位：Mbps。
# @type InternetMaxBandwidthOut: Integer
attr_accessor :VpnGatewayId, :InternetMaxBandwidthOut
def initialize(vpngatewayid=nil, internetmaxbandwidthout=nil)
@VpnGatewayId = vpngatewayid
@InternetMaxBandwidthOut = internetmaxbandwidthout
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
end
end
# ResetVpnGatewayInternetMaxBandwidth返回参数结构体
class ResetVpnGatewayInternetMaxBandwidthResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述带宽包资源信息的结构
class Resource < TencentCloud::Common::AbstractModel
# @param ResourceType: 带宽包资源类型，包括'Address'和'LoadBalance'
# @type ResourceType: String
# @param ResourceId: 带宽包资源Id，形如'eip-xxxx', 'lb-xxxx'
# @type ResourceId: String
# @param AddressIp: 带宽包资源Ip
# @type AddressIp: String
attr_accessor :ResourceType, :ResourceId, :AddressIp
def initialize(resourcetype=nil, resourceid=nil, addressip=nil)
@ResourceType = resourcetype
@ResourceId = resourceid
@AddressIp = addressip
end
def deserialize(params)
@ResourceType = params['ResourceType']
@ResourceId = params['ResourceId']
@AddressIp = params['AddressIp']
end
end
# VPC资源看板（各资源个数）
class ResourceDashboard < TencentCloud::Common::AbstractModel
# @param VpcId: Vpc实例ID，例如：vpc-bq4bzxpj。
# @type VpcId: String
# @param SubnetId: 子网实例ID，例如：subnet-bthucmmy。
# @type SubnetId: String
# @param Classiclink: 基础网络互通。
# @type Classiclink: Integer
# @param Dcg: 专线网关。
# @type Dcg: Integer
# @param Pcx: 对等连接。
# @type Pcx: Integer
# @param Ip: 统计当前除云服务器 IP、弹性网卡IP和网络探测IP以外的所有已使用的IP总数。云服务器 IP、弹性网卡IP和网络探测IP单独计数。
# @type Ip: Integer
# @param Nat: NAT网关。
# @type Nat: Integer
# @param Vpngw: VPN网关。
# @type Vpngw: Integer
# @param FlowLog: 流日志。
# @type FlowLog: Integer
# @param NetworkDetect: 网络探测。
# @type NetworkDetect: Integer
# @param NetworkACL: 网络ACL。
# @type NetworkACL: Integer
# @param CVM: 云主机。
# @type CVM: Integer
# @param LB: 负载均衡。
# @type LB: Integer
# @param CDB: 关系型数据库。
# @type CDB: Integer
# @param Cmem: 云数据库 TencentDB for Memcached。
# @type Cmem: Integer
# @param CTSDB: 时序数据库。
# @type CTSDB: Integer
# @param MariaDB: 数据库 TencentDB for MariaDB（TDSQL）。
# @type MariaDB: Integer
# @param SQLServer: 数据库 TencentDB for SQL Server。
# @type SQLServer: Integer
# @param Postgres: 云数据库 TencentDB for PostgreSQL。
# @type Postgres: Integer
# @param NAS: 网络附加存储。
# @type NAS: Integer
# @param Greenplumn: Snova云数据仓库。
# @type Greenplumn: Integer
# @param Ckafka: 消息队列 CKAFKA。
# @type Ckafka: Integer
# @param Grocery: Grocery。
# @type Grocery: Integer
# @param HSM: 数据加密服务。
# @type HSM: Integer
# @param Tcaplus: 游戏存储 Tcaplus。
# @type Tcaplus: Integer
# @param Cnas: Cnas。
# @type Cnas: Integer
# @param TiDB: HTAP 数据库 TiDB。
# @type TiDB: Integer
# @param Emr: EMR 集群。
# @type Emr: Integer
# @param SEAL: SEAL。
# @type SEAL: Integer
# @param CFS: 文件存储 CFS。
# @type CFS: Integer
# @param Oracle: Oracle。
# @type Oracle: Integer
# @param ElasticSearch: ElasticSearch服务。
# @type ElasticSearch: Integer
# @param TBaaS: 区块链服务。
# @type TBaaS: Integer
# @param Itop: Itop。
# @type Itop: Integer
# @param DBAudit: 云数据库审计。
# @type DBAudit: Integer
# @param CynosDBPostgres: 企业级云数据库 CynosDB for Postgres。
# @type CynosDBPostgres: Integer
# @param Redis: 数据库 TencentDB for Redis。
# @type Redis: Integer
# @param MongoDB: 数据库 TencentDB for MongoDB。
# @type MongoDB: Integer
# @param DCDB: 分布式数据库 TencentDB for TDSQL。
# @type DCDB: Integer
# @param CynosDBMySQL: 企业级云数据库 CynosDB for MySQL。
# @type CynosDBMySQL: Integer
# @param Subnet: 子网。
# @type Subnet: Integer
# @param RouteTable: 路由表。
# @type RouteTable: Integer
attr_accessor :VpcId, :SubnetId, :Classiclink, :Dcg, :Pcx, :Ip, :Nat, :Vpngw, :FlowLog, :NetworkDetect, :NetworkACL, :CVM, :LB, :CDB, :Cmem, :CTSDB, :MariaDB, :SQLServer, :Postgres, :NAS, :Greenplumn, :Ckafka, :Grocery, :HSM, :Tcaplus, :Cnas, :TiDB, :Emr, :SEAL, :CFS, :Oracle, :ElasticSearch, :TBaaS, :Itop, :DBAudit, :CynosDBPostgres, :Redis, :MongoDB, :DCDB, :CynosDBMySQL, :Subnet, :RouteTable
def initialize(vpcid=nil, subnetid=nil, classiclink=nil, dcg=nil, pcx=nil, ip=nil, nat=nil, vpngw=nil, flowlog=nil, networkdetect=nil, networkacl=nil, cvm=nil, lb=nil, cdb=nil, cmem=nil, ctsdb=nil, mariadb=nil, sqlserver=nil, postgres=nil, nas=nil, greenplumn=nil, ckafka=nil, grocery=nil, hsm=nil, tcaplus=nil, cnas=nil, tidb=nil, emr=nil, seal=nil, cfs=nil, oracle=nil, elasticsearch=nil, tbaas=nil, itop=nil, dbaudit=nil, cynosdbpostgres=nil, redis=nil, mongodb=nil, dcdb=nil, cynosdbmysql=nil, subnet=nil, routetable=nil)
@VpcId = vpcid
@SubnetId = subnetid
@Classiclink = classiclink
@Dcg = dcg
@Pcx = pcx
@Ip = ip
@Nat = nat
@Vpngw = vpngw
@FlowLog = flowlog
@NetworkDetect = networkdetect
@NetworkACL = networkacl
@CVM = cvm
@LB = lb
@CDB = cdb
@Cmem = cmem
@CTSDB = ctsdb
@MariaDB = mariadb
@SQLServer = sqlserver
@Postgres = postgres
@NAS = nas
@Greenplumn = greenplumn
@Ckafka = ckafka
@Grocery = grocery
@HSM = hsm
@Tcaplus = tcaplus
@Cnas = cnas
@TiDB = tidb
@Emr = emr
@SEAL = seal
@CFS = cfs
@Oracle = oracle
@ElasticSearch = elasticsearch
@TBaaS = tbaas
@Itop = itop
@DBAudit = dbaudit
@CynosDBPostgres = cynosdbpostgres
@Redis = redis
@MongoDB = mongodb
@DCDB = dcdb
@CynosDBMySQL = cynosdbmysql
@Subnet = subnet
@RouteTable = routetable
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Classiclink = params['Classiclink']
@Dcg = params['Dcg']
@Pcx = params['Pcx']
@Ip = params['Ip']
@Nat = params['Nat']
@Vpngw = params['Vpngw']
@FlowLog = params['FlowLog']
@NetworkDetect = params['NetworkDetect']
@NetworkACL = params['NetworkACL']
@CVM = params['CVM']
@LB = params['LB']
@CDB = params['CDB']
@Cmem = params['Cmem']
@CTSDB = params['CTSDB']
@MariaDB = params['MariaDB']
@SQLServer = params['SQLServer']
@Postgres = params['Postgres']
@NAS = params['NAS']
@Greenplumn = params['Greenplumn']
@Ckafka = params['Ckafka']
@Grocery = params['Grocery']
@HSM = params['HSM']
@Tcaplus = params['Tcaplus']
@Cnas = params['Cnas']
@TiDB = params['TiDB']
@Emr = params['Emr']
@SEAL = params['SEAL']
@CFS = params['CFS']
@Oracle = params['Oracle']
@ElasticSearch = params['ElasticSearch']
@TBaaS = params['TBaaS']
@Itop = params['Itop']
@DBAudit = params['DBAudit']
@CynosDBPostgres = params['CynosDBPostgres']
@Redis = params['Redis']
@MongoDB = params['MongoDB']
@DCDB = params['DCDB']
@CynosDBMySQL = params['CynosDBMySQL']
@Subnet = params['Subnet']
@RouteTable = params['RouteTable']
end
end
# 路由策略对象
class Route < TencentCloud::Common::AbstractModel
# @param DestinationCidrBlock: 目的网段，取值不能在私有网络网段内，例如：112.20.51.0/24。
# @type DestinationCidrBlock: String
# @param GatewayType: 下一跳类型，目前我们支持的类型有：
# CVM：公网网关类型的云服务器；
# VPN：VPN网关；
# DIRECTCONNECT：专线网关；
# PEERCONNECTION：对等连接；
# HAVIP：高可用虚拟IP；
# NAT：NAT网关;
# NORMAL_CVM：普通云服务器；
# EIP：云服务器的公网IP；
# LOCAL_GATEWAY：本地网关。
# @type GatewayType: String
# @param GatewayId: 下一跳地址，这里只需要指定不同下一跳类型的网关ID，系统会自动匹配到下一跳地址。
# 特别注意：当 GatewayType 为 EIP 时，GatewayId 固定值 '0'
# @type GatewayId: String
# @param RouteId: 路由策略ID。IPv4路由策略ID是有意义的值，IPv6路由策略是无意义的值0。后续建议完全使用字符串唯一ID `RouteItemId`操作路由策略。
# 该字段在删除时必填，其他字段无需填写。
# @type RouteId: Integer
# @param RouteDescription: 路由策略描述。
# @type RouteDescription: String
# @param Enabled: 是否启用
# @type Enabled: Boolean
# @param RouteType: 路由类型，目前我们支持的类型有：
# USER：用户路由；
# NETD：网络探测路由，创建网络探测实例时，系统默认下发，不可编辑与删除；
# CCN：云联网路由，系统默认下发，不可编辑与删除。
# 用户只能添加和操作 USER 类型的路由。
# @type RouteType: String
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param DestinationIpv6CidrBlock: 目的IPv6网段，取值不能在私有网络网段内，例如：2402:4e00:1000:810b::/64。
# @type DestinationIpv6CidrBlock: String
# @param RouteItemId: 路由唯一策略ID。
# @type RouteItemId: String
# @param PublishedToVbc: 路由策略是否发布到云联网。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublishedToVbc: Boolean
# @param CreatedTime: 路由策略创建时间
# @type CreatedTime: String
attr_accessor :DestinationCidrBlock, :GatewayType, :GatewayId, :RouteId, :RouteDescription, :Enabled, :RouteType, :RouteTableId, :DestinationIpv6CidrBlock, :RouteItemId, :PublishedToVbc, :CreatedTime
def initialize(destinationcidrblock=nil, gatewaytype=nil, gatewayid=nil, routeid=nil, routedescription=nil, enabled=nil, routetype=nil, routetableid=nil, destinationipv6cidrblock=nil, routeitemid=nil, publishedtovbc=nil, createdtime=nil)
@DestinationCidrBlock = destinationcidrblock
@GatewayType = gatewaytype
@GatewayId = gatewayid
@RouteId = routeid
@RouteDescription = routedescription
@Enabled = enabled
@RouteType = routetype
@RouteTableId = routetableid
@DestinationIpv6CidrBlock = destinationipv6cidrblock
@RouteItemId = routeitemid
@PublishedToVbc = publishedtovbc
@CreatedTime = createdtime
end
def deserialize(params)
@DestinationCidrBlock = params['DestinationCidrBlock']
@GatewayType = params['GatewayType']
@GatewayId = params['GatewayId']
@RouteId = params['RouteId']
@RouteDescription = params['RouteDescription']
@Enabled = params['Enabled']
@RouteType = params['RouteType']
@RouteTableId = params['RouteTableId']
@DestinationIpv6CidrBlock = params['DestinationIpv6CidrBlock']
@RouteItemId = params['RouteItemId']
@PublishedToVbc = params['PublishedToVbc']
@CreatedTime = params['CreatedTime']
end
end
# 路由冲突对象
class RouteConflict < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param DestinationCidrBlock: 要检查的与之冲突的目的端
# @type DestinationCidrBlock: String
# @param ConflictSet: 冲突的路由策略列表
# @type ConflictSet: Array
attr_accessor :RouteTableId, :DestinationCidrBlock, :ConflictSet
def initialize(routetableid=nil, destinationcidrblock=nil, conflictset=nil)
@RouteTableId = routetableid
@DestinationCidrBlock = destinationcidrblock
@ConflictSet = conflictset
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@DestinationCidrBlock = params['DestinationCidrBlock']
unless params['ConflictSet'].nil?
@ConflictSet = []
params['ConflictSet'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@ConflictSet << route_tmp
end
end
end
end
# 路由表对象
class RouteTable < TencentCloud::Common::AbstractModel
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param RouteTableId: 路由表实例ID，例如：rtb-azd4dt1c。
# @type RouteTableId: String
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param AssociationSet: 路由表关联关系。
# @type AssociationSet: Array
# @param RouteSet: IPv4路由策略集合。
# @type RouteSet: Array
# @param Main: 是否默认路由表。
# @type Main: Boolean
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param LocalCidrForCcn: local路由是否发布云联网。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalCidrForCcn: Array
attr_accessor :VpcId, :RouteTableId, :RouteTableName, :AssociationSet, :RouteSet, :Main, :CreatedTime, :TagSet, :LocalCidrForCcn
def initialize(vpcid=nil, routetableid=nil, routetablename=nil, associationset=nil, routeset=nil, main=nil, createdtime=nil, tagset=nil, localcidrforccn=nil)
@VpcId = vpcid
@RouteTableId = routetableid
@RouteTableName = routetablename
@AssociationSet = associationset
@RouteSet = routeset
@Main = main
@CreatedTime = createdtime
@TagSet = tagset
@LocalCidrForCcn = localcidrforccn
end
def deserialize(params)
@VpcId = params['VpcId']
@RouteTableId = params['RouteTableId']
@RouteTableName = params['RouteTableName']
unless params['AssociationSet'].nil?
@AssociationSet = []
params['AssociationSet'].each do |i|
routetableassociation_tmp = RouteTableAssociation.new
routetableassociation_tmp.deserialize(i)
@AssociationSet << routetableassociation_tmp
end
end
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
route_tmp = Route.new
route_tmp.deserialize(i)
@RouteSet << route_tmp
end
end
@Main = params['Main']
@CreatedTime = params['CreatedTime']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
unless params['LocalCidrForCcn'].nil?
@LocalCidrForCcn = []
params['LocalCidrForCcn'].each do |i|
cidrforccn_tmp = CidrForCcn.new
cidrforccn_tmp.deserialize(i)
@LocalCidrForCcn << cidrforccn_tmp
end
end
end
end
# 路由表关联关系
class RouteTableAssociation < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网实例ID。
# @type SubnetId: String
# @param RouteTableId: 路由表实例ID。
# @type RouteTableId: String
attr_accessor :SubnetId, :RouteTableId
def initialize(subnetid=nil, routetableid=nil)
@SubnetId = subnetid
@RouteTableId = routetableid
end
def deserialize(params)
@SubnetId = params['SubnetId']
@RouteTableId = params['RouteTableId']
end
end
# 安全组对象
class SecurityGroup < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID，例如：sg-ohuuioma。
# @type SecurityGroupId: String
# @param SecurityGroupName: 安全组名称，可任意命名，但不得超过60个字符。
# @type SecurityGroupName: String
# @param SecurityGroupDesc: 安全组备注，最多100个字符。
# @type SecurityGroupDesc: String
# @param ProjectId: 项目id，默认0。可在qcloud控制台项目管理页面查询到。
# @type ProjectId: String
# @param IsDefault: 是否是默认安全组，默认安全组不支持删除。
# @type IsDefault: Boolean
# @param CreatedTime: 安全组创建时间。
# @type CreatedTime: String
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param UpdateTime: 安全组更新时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
attr_accessor :SecurityGroupId, :SecurityGroupName, :SecurityGroupDesc, :ProjectId, :IsDefault, :CreatedTime, :TagSet, :UpdateTime
def initialize(securitygroupid=nil, securitygroupname=nil, securitygroupdesc=nil, projectid=nil, isdefault=nil, createdtime=nil, tagset=nil, updatetime=nil)
@SecurityGroupId = securitygroupid
@SecurityGroupName = securitygroupname
@SecurityGroupDesc = securitygroupdesc
@ProjectId = projectid
@IsDefault = isdefault
@CreatedTime = createdtime
@TagSet = tagset
@UpdateTime = updatetime
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
@SecurityGroupName = params['SecurityGroupName']
@SecurityGroupDesc = params['SecurityGroupDesc']
@ProjectId = params['ProjectId']
@IsDefault = params['IsDefault']
@CreatedTime = params['CreatedTime']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@UpdateTime = params['UpdateTime']
end
end
# 安全组关联的实例统计
class SecurityGroupAssociationStatistics < TencentCloud::Common::AbstractModel
# @param SecurityGroupId: 安全组实例ID。
# @type SecurityGroupId: String
# @param CVM: 云服务器实例数。
# @type CVM: Integer
# @param CDB: MySQL数据库实例数。
# @type CDB: Integer
# @param ENI: 弹性网卡实例数。
# @type ENI: Integer
# @param SG: 被安全组引用数。
# @type SG: Integer
# @param CLB: 负载均衡实例数。
# @type CLB: Integer
# @param InstanceStatistics: 全量实例的绑定统计。
# @type InstanceStatistics: Array
# @param TotalCount: 所有资源的总计数（不包含被安全组引用数）。
# @type TotalCount: Integer
attr_accessor :SecurityGroupId, :CVM, :CDB, :ENI, :SG, :CLB, :InstanceStatistics, :TotalCount
def initialize(securitygroupid=nil, cvm=nil, cdb=nil, eni=nil, sg=nil, clb=nil, instancestatistics=nil, totalcount=nil)
@SecurityGroupId = securitygroupid
@CVM = cvm
@CDB = cdb
@ENI = eni
@SG = sg
@CLB = clb
@InstanceStatistics = instancestatistics
@TotalCount = totalcount
end
def deserialize(params)
@SecurityGroupId = params['SecurityGroupId']
@CVM = params['CVM']
@CDB = params['CDB']
@ENI = params['ENI']
@SG = params['SG']
@CLB = params['CLB']
unless params['InstanceStatistics'].nil?
@InstanceStatistics = []
params['InstanceStatistics'].each do |i|
instancestatistic_tmp = InstanceStatistic.new
instancestatistic_tmp.deserialize(i)
@InstanceStatistics << instancestatistic_tmp
end
end
@TotalCount = params['TotalCount']
end
end
# 用户安全组配额限制。
class SecurityGroupLimitSet < TencentCloud::Common::AbstractModel
# @param SecurityGroupLimit: 每个项目每个地域可创建安全组数
# @type SecurityGroupLimit: Integer
# @param SecurityGroupPolicyLimit: 安全组下的最大规则数
# @type SecurityGroupPolicyLimit: Integer
# @param ReferedSecurityGroupLimit: 安全组下嵌套安全组规则数
# @type ReferedSecurityGroupLimit: Integer
# @param SecurityGroupInstanceLimit: 单安全组关联实例数
# @type SecurityGroupInstanceLimit: Integer
# @param InstanceSecurityGroupLimit: 实例关联安全组数
# @type InstanceSecurityGroupLimit: Integer
attr_accessor :SecurityGroupLimit, :SecurityGroupPolicyLimit, :ReferedSecurityGroupLimit, :SecurityGroupInstanceLimit, :InstanceSecurityGroupLimit
def initialize(securitygrouplimit=nil, securitygrouppolicylimit=nil, referedsecuritygrouplimit=nil, securitygroupinstancelimit=nil, instancesecuritygrouplimit=nil)
@SecurityGroupLimit = securitygrouplimit
@SecurityGroupPolicyLimit = securitygrouppolicylimit
@ReferedSecurityGroupLimit = referedsecuritygrouplimit
@SecurityGroupInstanceLimit = securitygroupinstancelimit
@InstanceSecurityGroupLimit = instancesecuritygrouplimit
end
def deserialize(params)
@SecurityGroupLimit = params['SecurityGroupLimit']
@SecurityGroupPolicyLimit = params['SecurityGroupPolicyLimit']
@ReferedSecurityGroupLimit = params['ReferedSecurityGroupLimit']
@SecurityGroupInstanceLimit = params['SecurityGroupInstanceLimit']
@InstanceSecurityGroupLimit = params['InstanceSecurityGroupLimit']
end
end
# 安全组规则对象
class SecurityGroupPolicy < TencentCloud::Common::AbstractModel
# @param PolicyIndex: 安全组规则索引号，值会随着安全组规则的变更动态变化。使用PolicyIndex时，请先调用`DescribeSecurityGroupPolicies`获取到规则的PolicyIndex，并且结合返回值中的Version一起使用处理规则。
# @type PolicyIndex: Integer
# @param Protocol: 协议, 取值: TCP,UDP,ICMP,ICMPv6,ALL。
# @type Protocol: String
# @param Port: 端口(all, 离散port, range)。
# @type Port: String
# @param ServiceTemplate: 协议端口ID或者协议端口组ID。ServiceTemplate和Protocol+Port互斥。
# @type ServiceTemplate: :class:`Tencentcloud::Vpc.v20170312.models.ServiceTemplateSpecification`
# @param CidrBlock: 网段或IP(互斥)。
# @type CidrBlock: String
# @param Ipv6CidrBlock: 网段或IPv6(互斥)。
# @type Ipv6CidrBlock: String
# @param SecurityGroupId: 安全组实例ID，例如：sg-ohuuioma。
# @type SecurityGroupId: String
# @param AddressTemplate: IP地址ID或者ID地址组ID。
# @type AddressTemplate: :class:`Tencentcloud::Vpc.v20170312.models.AddressTemplateSpecification`
# @param Action: ACCEPT 或 DROP。
# @type Action: String
# @param PolicyDescription: 安全组规则描述。
# @type PolicyDescription: String
# @param ModifyTime: 安全组最近修改时间。
# @type ModifyTime: String
attr_accessor :PolicyIndex, :Protocol, :Port, :ServiceTemplate, :CidrBlock, :Ipv6CidrBlock, :SecurityGroupId, :AddressTemplate, :Action, :PolicyDescription, :ModifyTime
def initialize(policyindex=nil, protocol=nil, port=nil, servicetemplate=nil, cidrblock=nil, ipv6cidrblock=nil, securitygroupid=nil, addresstemplate=nil, action=nil, policydescription=nil, modifytime=nil)
@PolicyIndex = policyindex
@Protocol = protocol
@Port = port
@ServiceTemplate = servicetemplate
@CidrBlock = cidrblock
@Ipv6CidrBlock = ipv6cidrblock
@SecurityGroupId = securitygroupid
@AddressTemplate = addresstemplate
@Action = action
@PolicyDescription = policydescription
@ModifyTime = modifytime
end
def deserialize(params)
@PolicyIndex = params['PolicyIndex']
@Protocol = params['Protocol']
@Port = params['Port']
unless params['ServiceTemplate'].nil?
@ServiceTemplate = ServiceTemplateSpecification.new
@ServiceTemplate.deserialize(params['ServiceTemplate'])
end
@CidrBlock = params['CidrBlock']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
@SecurityGroupId = params['SecurityGroupId']
unless params['AddressTemplate'].nil?
@AddressTemplate = AddressTemplateSpecification.new
@AddressTemplate.deserialize(params['AddressTemplate'])
end
@Action = params['Action']
@PolicyDescription = params['PolicyDescription']
@ModifyTime = params['ModifyTime']
end
end
# 安全组规则集合
class SecurityGroupPolicySet < TencentCloud::Common::AbstractModel
# @param Version: 安全组规则当前版本。用户每次更新安全规则版本会自动加1，防止更新的路由规则已过期，不填不考虑冲突。
# @type Version: String
# @param Egress: 出站规则。
# @type Egress: Array
# @param Ingress: 入站规则。
# @type Ingress: Array
attr_accessor :Version, :Egress, :Ingress
def initialize(version=nil, egress=nil, ingress=nil)
@Version = version
@Egress = egress
@Ingress = ingress
end
def deserialize(params)
@Version = params['Version']
unless params['Egress'].nil?
@Egress = []
params['Egress'].each do |i|
securitygrouppolicy_tmp = SecurityGroupPolicy.new
securitygrouppolicy_tmp.deserialize(i)
@Egress << securitygrouppolicy_tmp
end
end
unless params['Ingress'].nil?
@Ingress = []
params['Ingress'].each do |i|
securitygrouppolicy_tmp = SecurityGroupPolicy.new
securitygrouppolicy_tmp.deserialize(i)
@Ingress << securitygrouppolicy_tmp
end
end
end
end
# SecurityPolicyDatabase策略
class SecurityPolicyDatabase < TencentCloud::Common::AbstractModel
# @param LocalCidrBlock: 本端网段
# @type LocalCidrBlock: String
# @param RemoteCidrBlock: 对端网段
# @type RemoteCidrBlock: Array
attr_accessor :LocalCidrBlock, :RemoteCidrBlock
def initialize(localcidrblock=nil, remotecidrblock=nil)
@LocalCidrBlock = localcidrblock
@RemoteCidrBlock = remotecidrblock
end
def deserialize(params)
@LocalCidrBlock = params['LocalCidrBlock']
@RemoteCidrBlock = params['RemoteCidrBlock']
end
end
# 协议端口模板
class ServiceTemplate < TencentCloud::Common::AbstractModel
# @param ServiceTemplateId: 协议端口实例ID，例如：ppm-f5n1f8da。
# @type ServiceTemplateId: String
# @param ServiceTemplateName: 模板名称。
# @type ServiceTemplateName: String
# @param ServiceSet: 协议端口信息。
# @type ServiceSet: Array
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param ServiceExtraSet: 带备注的协议端口信息。
# @type ServiceExtraSet: Array
attr_accessor :ServiceTemplateId, :ServiceTemplateName, :ServiceSet, :CreatedTime, :ServiceExtraSet
def initialize(servicetemplateid=nil, servicetemplatename=nil, serviceset=nil, createdtime=nil, serviceextraset=nil)
@ServiceTemplateId = servicetemplateid
@ServiceTemplateName = servicetemplatename
@ServiceSet = serviceset
@CreatedTime = createdtime
@ServiceExtraSet = serviceextraset
end
def deserialize(params)
@ServiceTemplateId = params['ServiceTemplateId']
@ServiceTemplateName = params['ServiceTemplateName']
@ServiceSet = params['ServiceSet']
@CreatedTime = params['CreatedTime']
unless params['ServiceExtraSet'].nil?
@ServiceExtraSet = []
params['ServiceExtraSet'].each do |i|
servicesinfo_tmp = ServicesInfo.new
servicesinfo_tmp.deserialize(i)
@ServiceExtraSet << servicesinfo_tmp
end
end
end
end
# 协议端口模板集合
class ServiceTemplateGroup < TencentCloud::Common::AbstractModel
# @param ServiceTemplateGroupId: 协议端口模板集合实例ID，例如：ppmg-2klmrefu。
# @type ServiceTemplateGroupId: String
# @param ServiceTemplateGroupName: 协议端口模板集合名称。
# @type ServiceTemplateGroupName: String
# @param ServiceTemplateIdSet: 协议端口模板实例ID。
# @type ServiceTemplateIdSet: Array
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param ServiceTemplateSet: 协议端口模板实例信息。
# @type ServiceTemplateSet: Array
attr_accessor :ServiceTemplateGroupId, :ServiceTemplateGroupName, :ServiceTemplateIdSet, :CreatedTime, :ServiceTemplateSet
def initialize(servicetemplategroupid=nil, servicetemplategroupname=nil, servicetemplateidset=nil, createdtime=nil, servicetemplateset=nil)
@ServiceTemplateGroupId = servicetemplategroupid
@ServiceTemplateGroupName = servicetemplategroupname
@ServiceTemplateIdSet = servicetemplateidset
@CreatedTime = createdtime
@ServiceTemplateSet = servicetemplateset
end
def deserialize(params)
@ServiceTemplateGroupId = params['ServiceTemplateGroupId']
@ServiceTemplateGroupName = params['ServiceTemplateGroupName']
@ServiceTemplateIdSet = params['ServiceTemplateIdSet']
@CreatedTime = params['CreatedTime']
unless params['ServiceTemplateSet'].nil?
@ServiceTemplateSet = []
params['ServiceTemplateSet'].each do |i|
servicetemplate_tmp = ServiceTemplate.new
servicetemplate_tmp.deserialize(i)
@ServiceTemplateSet << servicetemplate_tmp
end
end
end
end
# 协议端口模版
class ServiceTemplateSpecification < TencentCloud::Common::AbstractModel
# @param ServiceId: 协议端口ID，例如：ppm-f5n1f8da。
# @type ServiceId: String
# @param ServiceGroupId: 协议端口组ID，例如：ppmg-f5n1f8da。
# @type ServiceGroupId: String
attr_accessor :ServiceId, :ServiceGroupId
def initialize(serviceid=nil, servicegroupid=nil)
@ServiceId = serviceid
@ServiceGroupId = servicegroupid
end
def deserialize(params)
@ServiceId = params['ServiceId']
@ServiceGroupId = params['ServiceGroupId']
end
end
# 协议端口模板信息
class ServicesInfo < TencentCloud::Common::AbstractModel
# @param Service: 协议端口。
# @type Service: String
# @param Description: 备注。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
attr_accessor :Service, :Description
def initialize(service=nil, description=nil)
@Service = service
@Description = description
end
def deserialize(params)
@Service = params['Service']
@Description = params['Description']
end
end
# SetCcnRegionBandwidthLimits请求参数结构体
class SetCcnRegionBandwidthLimitsRequest < TencentCloud::Common::AbstractModel
# @param CcnId: CCN实例ID。形如：ccn-f49l6u0z。
# @type CcnId: String
# @param CcnRegionBandwidthLimits: 云联网（CCN）各地域出带宽上限。
# @type CcnRegionBandwidthLimits: Array
# @param SetDefaultLimitFlag: 是否恢复云联网地域出口/地域间带宽限速为默认值（1Gbps）。false表示不恢复；true表示恢复。恢复默认值后，限速实例将不在控制台展示。该参数默认为 false，不恢复。
# @type SetDefaultLimitFlag: Boolean
attr_accessor :CcnId, :CcnRegionBandwidthLimits, :SetDefaultLimitFlag
def initialize(ccnid=nil, ccnregionbandwidthlimits=nil, setdefaultlimitflag=nil)
@CcnId = ccnid
@CcnRegionBandwidthLimits = ccnregionbandwidthlimits
@SetDefaultLimitFlag = setdefaultlimitflag
end
def deserialize(params)
@CcnId = params['CcnId']
unless params['CcnRegionBandwidthLimits'].nil?
@CcnRegionBandwidthLimits = []
params['CcnRegionBandwidthLimits'].each do |i|
ccnregionbandwidthlimit_tmp = CcnRegionBandwidthLimit.new
ccnregionbandwidthlimit_tmp.deserialize(i)
@CcnRegionBandwidthLimits << ccnregionbandwidthlimit_tmp
end
end
@SetDefaultLimitFlag = params['SetDefaultLimitFlag']
end
end
# SetCcnRegionBandwidthLimits返回参数结构体
class SetCcnRegionBandwidthLimitsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# NAT的SNAT规则
class SourceIpTranslationNatRule < TencentCloud::Common::AbstractModel
# @param ResourceId: 资源ID
# @type ResourceId: String
# @param ResourceType: 资源类型，目前包含SUBNET、NETWORKINTERFACE
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceType: String
# @param PrivateIpAddress: 源IP/网段
# @type PrivateIpAddress: String
# @param PublicIpAddresses: 弹性IP地址池
# @type PublicIpAddresses: Array
# @param Description: 描述
# @type Description: String
# @param NatGatewaySnatId: Snat规则ID
# @type NatGatewaySnatId: String
# @param NatGatewayId: NAT网关的ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NatGatewayId: String
# @param VpcId: 私有网络VPC的ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcId: String
# @param CreatedTime: NAT网关SNAT规则创建时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
attr_accessor :ResourceId, :ResourceType, :PrivateIpAddress, :PublicIpAddresses, :Description, :NatGatewaySnatId, :NatGatewayId, :VpcId, :CreatedTime
def initialize(resourceid=nil, resourcetype=nil, privateipaddress=nil, publicipaddresses=nil, description=nil, natgatewaysnatid=nil, natgatewayid=nil, vpcid=nil, createdtime=nil)
@ResourceId = resourceid
@ResourceType = resourcetype
@PrivateIpAddress = privateipaddress
@PublicIpAddresses = publicipaddresses
@Description = description
@NatGatewaySnatId = natgatewaysnatid
@NatGatewayId = natgatewayid
@VpcId = vpcid
@CreatedTime = createdtime
end
def deserialize(params)
@ResourceId = params['ResourceId']
@ResourceType = params['ResourceType']
@PrivateIpAddress = params['PrivateIpAddress']
@PublicIpAddresses = params['PublicIpAddresses']
@Description = params['Description']
@NatGatewaySnatId = params['NatGatewaySnatId']
@NatGatewayId = params['NatGatewayId']
@VpcId = params['VpcId']
@CreatedTime = params['CreatedTime']
end
end
# 子网对象
class Subnet < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`。
# @type VpcId: String
# @param SubnetId: 子网实例`ID`，例如：subnet-bthucmmy。
# @type SubnetId: String
# @param SubnetName: 子网名称。
# @type SubnetName: String
# @param CidrBlock: 子网的 `IPv4` `CIDR`。
# @type CidrBlock: String
# @param IsDefault: 是否默认子网。
# @type IsDefault: Boolean
# @param EnableBroadcast: 是否开启广播。
# @type EnableBroadcast: Boolean
# @param Zone: 可用区。
# @type Zone: String
# @param RouteTableId: 路由表实例ID，例如：rtb-l2h8d7c2。
# @type RouteTableId: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param AvailableIpAddressCount: 可用`IPv4`数。
# @type AvailableIpAddressCount: Integer
# @param Ipv6CidrBlock: 子网的 `IPv6` `CIDR`。
# @type Ipv6CidrBlock: String
# @param NetworkAclId: 关联`ACL`ID
# @type NetworkAclId: String
# @param IsRemoteVpcSnat: 是否为 `SNAT` 地址池子网。
# @type IsRemoteVpcSnat: Boolean
# @param TotalIpAddressCount: 子网`IPv4`总数。
# @type TotalIpAddressCount: Integer
# @param TagSet: 标签键值对。
# @type TagSet: Array
# @param CdcId: CDC实例ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CdcId: String
# @param IsCdcSubnet: 是否是CDC所属子网。0:否 1:是
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsCdcSubnet: Integer
attr_accessor :VpcId, :SubnetId, :SubnetName, :CidrBlock, :IsDefault, :EnableBroadcast, :Zone, :RouteTableId, :CreatedTime, :AvailableIpAddressCount, :Ipv6CidrBlock, :NetworkAclId, :IsRemoteVpcSnat, :TotalIpAddressCount, :TagSet, :CdcId, :IsCdcSubnet
def initialize(vpcid=nil, subnetid=nil, subnetname=nil, cidrblock=nil, isdefault=nil, enablebroadcast=nil, zone=nil, routetableid=nil, createdtime=nil, availableipaddresscount=nil, ipv6cidrblock=nil, networkaclid=nil, isremotevpcsnat=nil, totalipaddresscount=nil, tagset=nil, cdcid=nil, iscdcsubnet=nil)
@VpcId = vpcid
@SubnetId = subnetid
@SubnetName = subnetname
@CidrBlock = cidrblock
@IsDefault = isdefault
@EnableBroadcast = enablebroadcast
@Zone = zone
@RouteTableId = routetableid
@CreatedTime = createdtime
@AvailableIpAddressCount = availableipaddresscount
@Ipv6CidrBlock = ipv6cidrblock
@NetworkAclId = networkaclid
@IsRemoteVpcSnat = isremotevpcsnat
@TotalIpAddressCount = totalipaddresscount
@TagSet = tagset
@CdcId = cdcid
@IsCdcSubnet = iscdcsubnet
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@SubnetName = params['SubnetName']
@CidrBlock = params['CidrBlock']
@IsDefault = params['IsDefault']
@EnableBroadcast = params['EnableBroadcast']
@Zone = params['Zone']
@RouteTableId = params['RouteTableId']
@CreatedTime = params['CreatedTime']
@AvailableIpAddressCount = params['AvailableIpAddressCount']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
@NetworkAclId = params['NetworkAclId']
@IsRemoteVpcSnat = params['IsRemoteVpcSnat']
@TotalIpAddressCount = params['TotalIpAddressCount']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@CdcId = params['CdcId']
@IsCdcSubnet = params['IsCdcSubnet']
end
end
# 子网对象
class SubnetInput < TencentCloud::Common::AbstractModel
# @param CidrBlock: 子网的`CIDR`。
# @type CidrBlock: String
# @param SubnetName: 子网名称。
# @type SubnetName: String
# @param Zone: 可用区。形如：`ap-guangzhou-2`。
# @type Zone: String
# @param RouteTableId: 指定关联路由表，形如：`rtb-3ryrwzuu`。
# @type RouteTableId: String
attr_accessor :CidrBlock, :SubnetName, :Zone, :RouteTableId
def initialize(cidrblock=nil, subnetname=nil, zone=nil, routetableid=nil)
@CidrBlock = cidrblock
@SubnetName = subnetname
@Zone = zone
@RouteTableId = routetableid
end
def deserialize(params)
@CidrBlock = params['CidrBlock']
@SubnetName = params['SubnetName']
@Zone = params['Zone']
@RouteTableId = params['RouteTableId']
end
end
# 标签键值对
class Tag < TencentCloud::Common::AbstractModel
# @param Key: 标签键
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Key: String
# @param Value: 标签值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# 参数模板配额
class TemplateLimit < TencentCloud::Common::AbstractModel
# @param AddressTemplateMemberLimit: 参数模板IP地址成员配额。
# @type AddressTemplateMemberLimit: Integer
# @param AddressTemplateGroupMemberLimit: 参数模板IP地址组成员配额。
# @type AddressTemplateGroupMemberLimit: Integer
# @param ServiceTemplateMemberLimit: 参数模板I协议端口成员配额。
# @type ServiceTemplateMemberLimit: Integer
# @param ServiceTemplateGroupMemberLimit: 参数模板协议端口组成员配额。
# @type ServiceTemplateGroupMemberLimit: Integer
attr_accessor :AddressTemplateMemberLimit, :AddressTemplateGroupMemberLimit, :ServiceTemplateMemberLimit, :ServiceTemplateGroupMemberLimit
def initialize(addresstemplatememberlimit=nil, addresstemplategroupmemberlimit=nil, servicetemplatememberlimit=nil, servicetemplategroupmemberlimit=nil)
@AddressTemplateMemberLimit = addresstemplatememberlimit
@AddressTemplateGroupMemberLimit = addresstemplategroupmemberlimit
@ServiceTemplateMemberLimit = servicetemplatememberlimit
@ServiceTemplateGroupMemberLimit = servicetemplategroupmemberlimit
end
def deserialize(params)
@AddressTemplateMemberLimit = params['AddressTemplateMemberLimit']
@AddressTemplateGroupMemberLimit = params['AddressTemplateGroupMemberLimit']
@ServiceTemplateMemberLimit = params['ServiceTemplateMemberLimit']
@ServiceTemplateGroupMemberLimit = params['ServiceTemplateGroupMemberLimit']
end
end
# TransformAddress请求参数结构体
class TransformAddressRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待操作有普通公网 IP 的实例 ID。实例 ID 形如：`ins-11112222`。可通过登录[控制台](https://console.cloud.tencent.com/cvm)查询，也可通过 [DescribeInstances](https://cloud.tencent.com/document/api/213/9389) 接口返回值中的`InstanceId`获取。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# TransformAddress返回参数结构体
class TransformAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UnassignIpv6Addresses请求参数结构体
class UnassignIpv6AddressesRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例`ID`，形如：`eni-m6dyj72l`。
# @type NetworkInterfaceId: String
# @param Ipv6Addresses: 指定的`IPv6`地址列表，单次最多指定10个。
# @type Ipv6Addresses: Array
attr_accessor :NetworkInterfaceId, :Ipv6Addresses
def initialize(networkinterfaceid=nil, ipv6addresses=nil)
@NetworkInterfaceId = networkinterfaceid
@Ipv6Addresses = ipv6addresses
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['Ipv6Addresses'].nil?
@Ipv6Addresses = []
params['Ipv6Addresses'].each do |i|
ipv6address_tmp = Ipv6Address.new
ipv6address_tmp.deserialize(i)
@Ipv6Addresses << ipv6address_tmp
end
end
end
end
# UnassignIpv6Addresses返回参数结构体
class UnassignIpv6AddressesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UnassignIpv6CidrBlock请求参数结构体
class UnassignIpv6CidrBlockRequest < TencentCloud::Common::AbstractModel
# @param VpcId: `VPC`实例`ID`，形如：`vpc-f49l6u0z`。
# @type VpcId: String
# @param Ipv6CidrBlock: `IPv6`网段。形如：`3402:4e00:20:1000::/56`
# @type Ipv6CidrBlock: String
attr_accessor :VpcId, :Ipv6CidrBlock
def initialize(vpcid=nil, ipv6cidrblock=nil)
@VpcId = vpcid
@Ipv6CidrBlock = ipv6cidrblock
end
def deserialize(params)
@VpcId = params['VpcId']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
end
end
# UnassignIpv6CidrBlock返回参数结构体
class UnassignIpv6CidrBlockResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UnassignIpv6SubnetCidrBlock请求参数结构体
class UnassignIpv6SubnetCidrBlockRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 子网所在私有网络`ID`。形如：`vpc-f49l6u0z`。
# @type VpcId: String
# @param Ipv6SubnetCidrBlocks: `IPv6` 子网段列表。
# @type Ipv6SubnetCidrBlocks: Array
attr_accessor :VpcId, :Ipv6SubnetCidrBlocks
def initialize(vpcid=nil, ipv6subnetcidrblocks=nil)
@VpcId = vpcid
@Ipv6SubnetCidrBlocks = ipv6subnetcidrblocks
end
def deserialize(params)
@VpcId = params['VpcId']
unless params['Ipv6SubnetCidrBlocks'].nil?
@Ipv6SubnetCidrBlocks = []
params['Ipv6SubnetCidrBlocks'].each do |i|
ipv6subnetcidrblock_tmp = Ipv6SubnetCidrBlock.new
ipv6subnetcidrblock_tmp.deserialize(i)
@Ipv6SubnetCidrBlocks << ipv6subnetcidrblock_tmp
end
end
end
end
# UnassignIpv6SubnetCidrBlock返回参数结构体
class UnassignIpv6SubnetCidrBlockResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UnassignPrivateIpAddresses请求参数结构体
class UnassignPrivateIpAddressesRequest < TencentCloud::Common::AbstractModel
# @param NetworkInterfaceId: 弹性网卡实例ID，例如：eni-m6dyj72l。
# @type NetworkInterfaceId: String
# @param PrivateIpAddresses: 指定的内网IP信息，单次最多指定10个。
# @type PrivateIpAddresses: Array
# @param InstanceId: 网卡绑定的子机实例ID，该参数仅用于指定网卡退还IP并解绑子机的场景，如果不涉及解绑子机，请勿填写。
# @type InstanceId: String
attr_accessor :NetworkInterfaceId, :PrivateIpAddresses, :InstanceId
def initialize(networkinterfaceid=nil, privateipaddresses=nil, instanceid=nil)
@NetworkInterfaceId = networkinterfaceid
@PrivateIpAddresses = privateipaddresses
@InstanceId = instanceid
end
def deserialize(params)
@NetworkInterfaceId = params['NetworkInterfaceId']
unless params['PrivateIpAddresses'].nil?
@PrivateIpAddresses = []
params['PrivateIpAddresses'].each do |i|
privateipaddressspecification_tmp = PrivateIpAddressSpecification.new
privateipaddressspecification_tmp.deserialize(i)
@PrivateIpAddresses << privateipaddressspecification_tmp
end
end
@InstanceId = params['InstanceId']
end
end
# UnassignPrivateIpAddresses返回参数结构体
class UnassignPrivateIpAddressesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 私有网络(VPC)对象。
class Vpc < TencentCloud::Common::AbstractModel
# @param VpcName: `VPC`名称。
# @type VpcName: String
# @param VpcId: `VPC`实例`ID`，例如：vpc-azd4dt1c。
# @type VpcId: String
# @param CidrBlock: `VPC`的`IPv4` `CIDR`。
# @type CidrBlock: String
# @param IsDefault: 是否默认`VPC`。
# @type IsDefault: Boolean
# @param EnableMulticast: 是否开启组播。
# @type EnableMulticast: Boolean
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param DnsServerSet: `DNS`列表。
# @type DnsServerSet: Array
# @param DomainName: `DHCP`域名选项值。
# @type DomainName: String
# @param DhcpOptionsId: `DHCP`选项集`ID`。
# @type DhcpOptionsId: String
# @param EnableDhcp: 是否开启`DHCP`。
# @type EnableDhcp: Boolean
# @param Ipv6CidrBlock: `VPC`的`IPv6` `CIDR`。
# @type Ipv6CidrBlock: String
# @param TagSet: 标签键值对
# @type TagSet: Array
# @param AssistantCidrSet: 辅助CIDR
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssistantCidrSet: Array
attr_accessor :VpcName, :VpcId, :CidrBlock, :IsDefault, :EnableMulticast, :CreatedTime, :DnsServerSet, :DomainName, :DhcpOptionsId, :EnableDhcp, :Ipv6CidrBlock, :TagSet, :AssistantCidrSet
def initialize(vpcname=nil, vpcid=nil, cidrblock=nil, isdefault=nil, enablemulticast=nil, createdtime=nil, dnsserverset=nil, domainname=nil, dhcpoptionsid=nil, enabledhcp=nil, ipv6cidrblock=nil, tagset=nil, assistantcidrset=nil)
@VpcName = vpcname
@VpcId = vpcid
@CidrBlock = cidrblock
@IsDefault = isdefault
@EnableMulticast = enablemulticast
@CreatedTime = createdtime
@DnsServerSet = dnsserverset
@DomainName = domainname
@DhcpOptionsId = dhcpoptionsid
@EnableDhcp = enabledhcp
@Ipv6CidrBlock = ipv6cidrblock
@TagSet = tagset
@AssistantCidrSet = assistantcidrset
end
def deserialize(params)
@VpcName = params['VpcName']
@VpcId = params['VpcId']
@CidrBlock = params['CidrBlock']
@IsDefault = params['IsDefault']
@EnableMulticast = params['EnableMulticast']
@CreatedTime = params['CreatedTime']
@DnsServerSet = params['DnsServerSet']
@DomainName = params['DomainName']
@DhcpOptionsId = params['DhcpOptionsId']
@EnableDhcp = params['EnableDhcp']
@Ipv6CidrBlock = params['Ipv6CidrBlock']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
unless params['AssistantCidrSet'].nil?
@AssistantCidrSet = []
params['AssistantCidrSet'].each do |i|
assistantcidr_tmp = AssistantCidr.new
assistantcidr_tmp.deserialize(i)
@AssistantCidrSet << assistantcidr_tmp
end
end
end
end
# 终端节点服务的服务白名单对象详情。
class VpcEndPointServiceUser < TencentCloud::Common::AbstractModel
# @param Owner: AppId。
# @type Owner: Integer
# @param UserUin: Uin。
# @type UserUin: String
# @param Description: 描述信息。
# @type Description: String
# @param CreateTime: 创建时间。
# @type CreateTime: String
# @param EndPointServiceId: 终端节点服务ID。
# @type EndPointServiceId: String
attr_accessor :Owner, :UserUin, :Description, :CreateTime, :EndPointServiceId
def initialize(owner=nil, useruin=nil, description=nil, createtime=nil, endpointserviceid=nil)
@Owner = owner
@UserUin = useruin
@Description = description
@CreateTime = createtime
@EndPointServiceId = endpointserviceid
end
def deserialize(params)
@Owner = params['Owner']
@UserUin = params['UserUin']
@Description = params['Description']
@CreateTime = params['CreateTime']
@EndPointServiceId = params['EndPointServiceId']
end
end
# VPC内网IPv6对象。
class VpcIpv6Address < TencentCloud::Common::AbstractModel
# @param Ipv6Address: `VPC`内`IPv6`地址。
# @type Ipv6Address: String
# @param CidrBlock: 所属子网 `IPv6` `CIDR`。
# @type CidrBlock: String
# @param Ipv6AddressType: `IPv6`类型。
# @type Ipv6AddressType: String
# @param CreatedTime: `IPv6`申请时间。
# @type CreatedTime: String
attr_accessor :Ipv6Address, :CidrBlock, :Ipv6AddressType, :CreatedTime
def initialize(ipv6address=nil, cidrblock=nil, ipv6addresstype=nil, createdtime=nil)
@Ipv6Address = ipv6address
@CidrBlock = cidrblock
@Ipv6AddressType = ipv6addresstype
@CreatedTime = createdtime
end
def deserialize(params)
@Ipv6Address = params['Ipv6Address']
@CidrBlock = params['CidrBlock']
@Ipv6AddressType = params['Ipv6AddressType']
@CreatedTime = params['CreatedTime']
end
end
# 私有网络配额
class VpcLimit < TencentCloud::Common::AbstractModel
# @param LimitType: 私有网络配额描述
# @type LimitType: String
# @param LimitValue: 私有网络配额值
# @type LimitValue: Integer
attr_accessor :LimitType, :LimitValue
def initialize(limittype=nil, limitvalue=nil)
@LimitType = limittype
@LimitValue = limitvalue
end
def deserialize(params)
@LimitType = params['LimitType']
@LimitValue = params['LimitValue']
end
end
# VPC内网IP对象。
class VpcPrivateIpAddress < TencentCloud::Common::AbstractModel
# @param PrivateIpAddress: `VPC`内网`IP`。
# @type PrivateIpAddress: String
# @param CidrBlock: 所属子网`CIDR`。
# @type CidrBlock: String
# @param PrivateIpAddressType: 内网`IP`类型。
# @type PrivateIpAddressType: String
# @param CreatedTime: `IP`申请时间。
# @type CreatedTime: String
attr_accessor :PrivateIpAddress, :CidrBlock, :PrivateIpAddressType, :CreatedTime
def initialize(privateipaddress=nil, cidrblock=nil, privateipaddresstype=nil, createdtime=nil)
@PrivateIpAddress = privateipaddress
@CidrBlock = cidrblock
@PrivateIpAddressType = privateipaddresstype
@CreatedTime = createdtime
end
def deserialize(params)
@PrivateIpAddress = params['PrivateIpAddress']
@CidrBlock = params['CidrBlock']
@PrivateIpAddressType = params['PrivateIpAddressType']
@CreatedTime = params['CreatedTime']
end
end
# VPN通道对象。
class VpnConnection < TencentCloud::Common::AbstractModel
# @param VpnConnectionId: 通道实例ID。
# @type VpnConnectionId: String
# @param VpnConnectionName: 通道名称。
# @type VpnConnectionName: String
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param VpnGatewayId: VPN网关实例ID。
# @type VpnGatewayId: String
# @param CustomerGatewayId: 对端网关实例ID。
# @type CustomerGatewayId: String
# @param PreShareKey: 预共享密钥。
# @type PreShareKey: String
# @param VpnProto: 通道传输协议。
# @type VpnProto: String
# @param EncryptProto: 通道加密协议。
# @type EncryptProto: String
# @param RouteType: 路由类型。
# @type RouteType: String
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param State: 通道的生产状态，PENDING：生产中，AVAILABLE：运行中，DELETING：删除中。
# @type State: String
# @param NetStatus: 通道连接状态，AVAILABLE：已连接。
# @type NetStatus: String
# @param SecurityPolicyDatabaseSet: SPD。
# @type SecurityPolicyDatabaseSet: Array
# @param IKEOptionsSpecification: IKE选项。
# @type IKEOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IKEOptionsSpecification`
# @param IPSECOptionsSpecification: IPSEC选择。
# @type IPSECOptionsSpecification: :class:`Tencentcloud::Vpc.v20170312.models.IPSECOptionsSpecification`
# @param EnableHealthCheck: 是否支持健康状态探测
# @type EnableHealthCheck: Boolean
# @param HealthCheckLocalIp: 本端探测ip
# @type HealthCheckLocalIp: String
# @param HealthCheckRemoteIp: 对端探测ip
# @type HealthCheckRemoteIp: String
# @param HealthCheckStatus: 通道健康检查状态，AVAILABLE：正常，UNAVAILABLE：不正常。 未配置健康检查不返回该对象
# @type HealthCheckStatus: String
attr_accessor :VpnConnectionId, :VpnConnectionName, :VpcId, :VpnGatewayId, :CustomerGatewayId, :PreShareKey, :VpnProto, :EncryptProto, :RouteType, :CreatedTime, :State, :NetStatus, :SecurityPolicyDatabaseSet, :IKEOptionsSpecification, :IPSECOptionsSpecification, :EnableHealthCheck, :HealthCheckLocalIp, :HealthCheckRemoteIp, :HealthCheckStatus
def initialize(vpnconnectionid=nil, vpnconnectionname=nil, vpcid=nil, vpngatewayid=nil, customergatewayid=nil, presharekey=nil, vpnproto=nil, encryptproto=nil, routetype=nil, createdtime=nil, state=nil, netstatus=nil, securitypolicydatabaseset=nil, ikeoptionsspecification=nil, ipsecoptionsspecification=nil, enablehealthcheck=nil, healthchecklocalip=nil, healthcheckremoteip=nil, healthcheckstatus=nil)
@VpnConnectionId = vpnconnectionid
@VpnConnectionName = vpnconnectionname
@VpcId = vpcid
@VpnGatewayId = vpngatewayid
@CustomerGatewayId = customergatewayid
@PreShareKey = presharekey
@VpnProto = vpnproto
@EncryptProto = encryptproto
@RouteType = routetype
@CreatedTime = createdtime
@State = state
@NetStatus = netstatus
@SecurityPolicyDatabaseSet = securitypolicydatabaseset
@IKEOptionsSpecification = ikeoptionsspecification
@IPSECOptionsSpecification = ipsecoptionsspecification
@EnableHealthCheck = enablehealthcheck
@HealthCheckLocalIp = healthchecklocalip
@HealthCheckRemoteIp = healthcheckremoteip
@HealthCheckStatus = healthcheckstatus
end
def deserialize(params)
@VpnConnectionId = params['VpnConnectionId']
@VpnConnectionName = params['VpnConnectionName']
@VpcId = params['VpcId']
@VpnGatewayId = params['VpnGatewayId']
@CustomerGatewayId = params['CustomerGatewayId']
@PreShareKey = params['PreShareKey']
@VpnProto = params['VpnProto']
@EncryptProto = params['EncryptProto']
@RouteType = params['RouteType']
@CreatedTime = params['CreatedTime']
@State = params['State']
@NetStatus = params['NetStatus']
unless params['SecurityPolicyDatabaseSet'].nil?
@SecurityPolicyDatabaseSet = []
params['SecurityPolicyDatabaseSet'].each do |i|
securitypolicydatabase_tmp = SecurityPolicyDatabase.new
securitypolicydatabase_tmp.deserialize(i)
@SecurityPolicyDatabaseSet << securitypolicydatabase_tmp
end
end
unless params['IKEOptionsSpecification'].nil?
@IKEOptionsSpecification = IKEOptionsSpecification.new
@IKEOptionsSpecification.deserialize(params['IKEOptionsSpecification'])
end
unless params['IPSECOptionsSpecification'].nil?
@IPSECOptionsSpecification = IPSECOptionsSpecification.new
@IPSECOptionsSpecification.deserialize(params['IPSECOptionsSpecification'])
end
@EnableHealthCheck = params['EnableHealthCheck']
@HealthCheckLocalIp = params['HealthCheckLocalIp']
@HealthCheckRemoteIp = params['HealthCheckRemoteIp']
@HealthCheckStatus = params['HealthCheckStatus']
end
end
# VPN网关对象。
class VpnGateway < TencentCloud::Common::AbstractModel
# @param VpnGatewayId: 网关实例ID。
# @type VpnGatewayId: String
# @param VpcId: VPC实例ID。
# @type VpcId: String
# @param VpnGatewayName: 网关实例名称。
# @type VpnGatewayName: String
# @param Type: 网关实例类型：'IPSEC', 'SSL','CCN'。
# @type Type: String
# @param State: 网关实例状态， 'PENDING'：生产中，'DELETING'：删除中，'AVAILABLE'：运行中。
# @type State: String
# @param PublicIpAddress: 网关公网IP。
# @type PublicIpAddress: String
# @param RenewFlag: 网关续费类型：'NOTIFY_AND_MANUAL_RENEW'：手动续费，'NOTIFY_AND_AUTO_RENEW'：自动续费，'NOT_NOTIFY_AND_NOT_RENEW'：到期不续费。
# @type RenewFlag: String
# @param InstanceChargeType: 网关付费类型：POSTPAID_BY_HOUR：按小时后付费，PREPAID：包年包月预付费，
# @type InstanceChargeType: String
# @param InternetMaxBandwidthOut: 网关出带宽。
# @type InternetMaxBandwidthOut: Integer
# @param CreatedTime: 创建时间。
# @type CreatedTime: String
# @param ExpiredTime: 预付费网关过期时间。
# @type ExpiredTime: String
# @param IsAddressBlocked: 公网IP是否被封堵。
# @type IsAddressBlocked: Boolean
# @param NewPurchasePlan: 计费模式变更，PREPAID_TO_POSTPAID：包年包月预付费到期转按小时后付费。
# @type NewPurchasePlan: String
# @param RestrictState: 网关计费装，PROTECTIVELY_ISOLATED：被安全隔离的实例，NORMAL：正常。
# @type RestrictState: String
# @param Zone: 可用区，如：ap-guangzhou-2
# @type Zone: String
# @param VpnGatewayQuotaSet: 网关带宽配额信息
# @type VpnGatewayQuotaSet: Array
# @param Version: 网关实例版本信息
# @type Version: String
# @param NetworkInstanceId: Type值为CCN时，该值表示云联网实例ID
# @type NetworkInstanceId: String
# @param CdcId: CDC 实例ID
# @type CdcId: String
# @param MaxConnection: SSL-VPN 客户端连接数。
# @type MaxConnection: Integer
attr_accessor :VpnGatewayId, :VpcId, :VpnGatewayName, :Type, :State, :PublicIpAddress, :RenewFlag, :InstanceChargeType, :InternetMaxBandwidthOut, :CreatedTime, :ExpiredTime, :IsAddressBlocked, :NewPurchasePlan, :RestrictState, :Zone, :VpnGatewayQuotaSet, :Version, :NetworkInstanceId, :CdcId, :MaxConnection
def initialize(vpngatewayid=nil, vpcid=nil, vpngatewayname=nil, type=nil, state=nil, publicipaddress=nil, renewflag=nil, instancechargetype=nil, internetmaxbandwidthout=nil, createdtime=nil, expiredtime=nil, isaddressblocked=nil, newpurchaseplan=nil, restrictstate=nil, zone=nil, vpngatewayquotaset=nil, version=nil, networkinstanceid=nil, cdcid=nil, maxconnection=nil)
@VpnGatewayId = vpngatewayid
@VpcId = vpcid
@VpnGatewayName = vpngatewayname
@Type = type
@State = state
@PublicIpAddress = publicipaddress
@RenewFlag = renewflag
@InstanceChargeType = instancechargetype
@InternetMaxBandwidthOut = internetmaxbandwidthout
@CreatedTime = createdtime
@ExpiredTime = expiredtime
@IsAddressBlocked = isaddressblocked
@NewPurchasePlan = newpurchaseplan
@RestrictState = restrictstate
@Zone = zone
@VpnGatewayQuotaSet = vpngatewayquotaset
@Version = version
@NetworkInstanceId = networkinstanceid
@CdcId = cdcid
@MaxConnection = maxconnection
end
def deserialize(params)
@VpnGatewayId = params['VpnGatewayId']
@VpcId = params['VpcId']
@VpnGatewayName = params['VpnGatewayName']
@Type = params['Type']
@State = params['State']
@PublicIpAddress = params['PublicIpAddress']
@RenewFlag = params['RenewFlag']
@InstanceChargeType = params['InstanceChargeType']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@CreatedTime = params['CreatedTime']
@ExpiredTime = params['ExpiredTime']
@IsAddressBlocked = params['IsAddressBlocked']
@NewPurchasePlan = params['NewPurchasePlan']
@RestrictState = params['RestrictState']
@Zone = params['Zone']
unless params['VpnGatewayQuotaSet'].nil?
@VpnGatewayQuotaSet = []
params['VpnGatewayQuotaSet'].each do |i|
vpngatewayquota_tmp = VpnGatewayQuota.new
vpngatewayquota_tmp.deserialize(i)
@VpnGatewayQuotaSet << vpngatewayquota_tmp
end
end
@Version = params['Version']
@NetworkInstanceId = params['NetworkInstanceId']
@CdcId = params['CdcId']
@MaxConnection = params['MaxConnection']
end
end
# VPN网关配额对象
class VpnGatewayQuota < TencentCloud::Common::AbstractModel
# @param Bandwidth: 带宽配额
# @type Bandwidth: Integer
# @param Cname: 配额中文名称
# @type Cname: String
# @param Name: 配额英文名称
# @type Name: String
attr_accessor :Bandwidth, :Cname, :Name
def initialize(bandwidth=nil, cname=nil, name=nil)
@Bandwidth = bandwidth
@Cname = cname
@Name = name
end
def deserialize(params)
@Bandwidth = params['Bandwidth']
@Cname = params['Cname']
@Name = params['Name']
end
end
# Vpn网关目的路由
class VpnGatewayRoute < TencentCloud::Common::AbstractModel
# @param DestinationCidrBlock: 目的端IDC网段
# @type DestinationCidrBlock: String
# @param InstanceType: 下一跳类型（关联实例类型）可选值:"VPNCONN"(VPN通道), "CCN"(CCN实例)
# @type InstanceType: String
# @param InstanceId: 下一跳实例ID
# @type InstanceId: String
# @param Priority: 优先级, 可选值: 0, 100
# @type Priority: Integer
# @param Status: 启用状态, 可选值: "ENABLE"(启用), "DISABLE"(禁用)
# @type Status: String
# @param RouteId: 路由条目ID
# @type RouteId: String
# @param Type: 路由类型, 可选值: "VPC"(VPC路由), "CCN"(云联网传播路由), "Static"(静态路由), "BGP"(BGP路由)
# @type Type: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
attr_accessor :DestinationCidrBlock, :InstanceType, :InstanceId, :Priority, :Status, :RouteId, :Type, :CreateTime, :UpdateTime
def initialize(destinationcidrblock=nil, instancetype=nil, instanceid=nil, priority=nil, status=nil, routeid=nil, type=nil, createtime=nil, updatetime=nil)
@DestinationCidrBlock = destinationcidrblock
@InstanceType = instancetype
@InstanceId = instanceid
@Priority = priority
@Status = status
@RouteId = routeid
@Type = type
@CreateTime = createtime
@UpdateTime = updatetime
end
def deserialize(params)
@DestinationCidrBlock = params['DestinationCidrBlock']
@InstanceType = params['InstanceType']
@InstanceId = params['InstanceId']
@Priority = params['Priority']
@Status = params['Status']
@RouteId = params['RouteId']
@Type = params['Type']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
end
end
# 修改VPN状态参数
class VpnGatewayRouteModify < TencentCloud::Common::AbstractModel
# @param RouteId: Vpn网关路由ID
# @type RouteId: String
# @param Status: Vpn网关状态, ENABEL 启用, DISABLE禁用
# @type Status: String
attr_accessor :RouteId, :Status
def initialize(routeid=nil, status=nil)
@RouteId = routeid
@Status = status
end
def deserialize(params)
@RouteId = params['RouteId']
@Status = params['Status']
end
end
# VPN网关云联网路由信息
class VpngwCcnRoutes < TencentCloud::Common::AbstractModel
# @param RouteId: 路由信息ID
# @type RouteId: String
# @param Status: 路由信息是否启用
# ENABLE：启用该路由
# DISABLE：不启用该路由
# @type Status: String
attr_accessor :RouteId, :Status
def initialize(routeid=nil, status=nil)
@RouteId = routeid
@Status = status
end
def deserialize(params)
@RouteId = params['RouteId']
@Status = params['Status']
end
end
# WithdrawNotifyRoutes请求参数结构体
class WithdrawNotifyRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableId: 路由表唯一ID。
# @type RouteTableId: String
# @param RouteItemIds: 路由策略唯一ID。
# @type RouteItemIds: Array
attr_accessor :RouteTableId, :RouteItemIds
def initialize(routetableid=nil, routeitemids=nil)
@RouteTableId = routetableid
@RouteItemIds = routeitemids
end
def deserialize(params)
@RouteTableId = params['RouteTableId']
@RouteItemIds = params['RouteItemIds']
end
end
# WithdrawNotifyRoutes返回参数结构体
class WithdrawNotifyRoutesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
end
end
end