// this is the grid framework
// @category  grid

// calculate the width of a grid block
// @function  _getGridWidth
// @private
// @param     $columns {Number} the number or fraction of columns to span, if fraction, must specify $of
// @param     $of {Number} the total number of columns spanned, only use with fractional $columns
// @param     $indent {List} total indent for both left and right sides (needed to adjust for box-model padding)
// @return    $width {Number} calculated width
// @usage:
// _getGridWidth(5) => width of 5 columns
// _getGridWidth(1/3, $of: 8) => splits an 8 column grid into 1/3
// _getGridWidth(5, $indent: (10px 0px)) => subtracts the $indent from the total width
@function _getGridWidth($columns, $of: false, $indent: false) {
  $width: 0;
  // if we're doing 1/3, 2/3, etc...
  @if($of or $columns < 1) {
    @if(type-of($of) != number) {
      $of: $CONFIG_GRID_MAX_COLUMNS;
    }

    // check if the divisors conform to our restrictions
    @if($CONFIG_GRID_ALLOWED_DIVISORS) {
      $allowed-column-factors: ();
      @each $divisor in $CONFIG_GRID_ALLOWED_DIVISORS {
        $numerator: $divisor;
        @while($numerator > 0) {
          $numerator: ($numerator - 1);
          $allowed-column-factors: append($allowed-column-factors, ($numerator / $divisor));
        }
      }
      @if(not index($allowed-column-factors, $columns)) {
        @warn "[archetype:grid] you can't divide a block into #{columns}";
        $columns: 1;
      }
    }
    // check if the specified columns are valid
    @if($CONFIG_GRID_ALLOWED_DIVISABLE) {
      @if(not index($CONFIG_GRID_ALLOWED_DIVISABLE, $of)) {
        @warn "[archetype:grid] you can't divide #{of} columns";
        $of: $CONFIG_GRID_MAX_COLUMNS;
      }
    }

    $columns: ($columns * $of);
    @if($columns < $CONFIG_GRID_MIN_THRESHOLD and $columns > 0) {
      @warn "[archetype:grid] #{$columns} of #{$of} columns is too small. Use a larger column size";
      $columns: $CONFIG_GRID_MIN_THRESHOLD;
    }
  }
  // calculate
  $width: ($columns * $CONFIG_GRID_COLUMN) + (($columns - 1) * $CONFIG_GRID_GUTTER);

  @if(length($indent) == 2) {
    $width: ($width - nth($indent,1) - nth($indent,2));
  }
  @return $width;
}

// abstract function to indent or outdent a grid block
// @function  _gridDent
// @private
// @param     $list {List} list of dents
// @param     $left {Number} the number of units to dent left
// @param     $right {Number} the number of units to dent right
// @param     $direction {String} [in|out] the direction to dent
// @param     $abuse {Boolean} @see _archetype_integerize
// @return    $dent {List} list of dents
@function _gridDent($list: false, $left: 0, $right: 0, $direction: in, $abuse: false) {
  $factor: if($direction == out, -1, 1) * $CONFIG_GRID_SPACING_FACTOR;
  $dent: ();
  $list: get-collection($list, ($left $right), $min: 2);

  @each $unit in $list {
    $unit: ($factor * $unit);
    $dent: append($dent, horizontal-spacing($unit, $abuse: $abuse), space);
  }

  @if(length($dent) == 1) {
    $dent: append($dent, $dent);
  }

  @return $dent;
}

// calculate indents on a grid block
// @function  grid-indent
// @param     $list {List} list of indents
// @param     $left {Number} the number of units to indent left
// @param     $right {Number} the number of units to indent right
// @param     $abuse {Boolean} @see _archetype_integerize
// @return    {List} list of indents
@function grid-indent($list: false, $left: 0, $right: 0, $abuse: false) {
  @return _gridDent($list, $left, $right, $direction: in, $abuse: $abuse);
}

// calculate outdents on a grid block
// @function  grid-outdent
// @param     $list {List} list of outdents
// @param     $left {Number} the number of units to outdent left
// @param     $right {Number} the number of units to outdent right
// @param     $abuse {Boolean} @see _archetype_integerize
// @return    {List} list of outdents
@function grid-outdent($list: false, $left: 0, $right: 0, $abuse: false) {
  @return _gridDent($list, $left, $right, $direction: out, $abuse: $abuse);
}

// generate the negative margins needed for a grid-outdent
// @mixin     grid-outdent
// @param     $list {List} list of outdents
// @param     $left {Number} the number of units to outdent left
// @param     $right {Number} the number of units to outdent right
@mixin grid-outdent($list: false, $left: 0, $right: 0) {
  $outdent: grid-outdent($list, $left, $right);
  @include grid-output-left-right(margin, $outdent);
  @include hack-negative-margin();
}

// calculate offsets for a grid block
// @function  grid-offset
// @param     $list {List} list of offsets
// @param     $left {Number} the number of columns to offset left
// @param     $right {Number} the number of columns to offset right
// @param     $of {Number} the total number of columns, used if $left/$right are fractional
// @return    {List} list of offsets
@function grid-offset($list: false, $left: 0, $right: 0, $of: false) {
  $list: get-collection($list, ($left, $right), $min: 2);
  $left: nth($list,1);
  $left: if($left > 0, _getGridWidth($columns: $left, $of: $of) + $CONFIG_GRID_GUTTER, 0);
  $right: nth($list,2);
  $right: if($right > 0, _getGridWidth($columns: $right, $of: $of) + $CONFIG_GRID_GUTTER, 0);
  @return ($left, $right);
}
// convenience mixin for grid-offset
@mixin grid-offset($list: false, $left: 0, $right: 0, $of: false, $first: false, $method: $CONFIG_GRID_OFFSET_METHOD) {
  $offset: grid-offset($list: $list, $left: $left, $right: $right, $of: $of);
  @if($method == position) {
    @include grid-offset-position($offset: $offset);
  }
  @else {
    @include grid-offset-margin($offset: $offset, $first: $first);
  }
}
// convenience method for using the position offset method
@mixin grid-offset-position($offset) {
  position: relative;
  @include grid-output-left-right($values: $offset);
}
// convenience method for using the margin offset method
@mixin grid-offset-margin($offset, $first: false, $outdent: false) {
  $outdent: get-collection($outdent, 0, $min: 2);
  $gutter: if($first, 0, $CONFIG_GRID_GUTTER);
  @include grid-output-left-right(margin, list-add($outdent, list-add($offset, ($gutter $gutter))), $ignore: ($gutter));
  @include hack-negative-margin();
}

// calculate push (offset) for a grid block
// @function  grid-push
// @param     $columns {List} the number of columns to offset left
// @param     $of {Number} the total number of columns, used if $left is fractional
// @return    {List} list of pushes
@function grid-push($columns: 0, $of: false) {
  @return grid-offset($left: $columns, $of: $of);
}
// convenience mixin for grid-push
@mixin grid-push($columns:0, $of: false, $first: false, $method: position) {
  @include grid-offset($left: $columns, $of: $of, $first: false, $method: $method);
}

// calculate pull (offset) for a grid block
// @function  grid-pull
// @param     $columns {List} the number of columns to offset right
// @param     $of {Number} the total number of columns, used if $right is fractional
// @return    {List} list of pulls
@function grid-pull($columns: 0, $of: false) {
  @return grid-offset($right: $columns, $of: $of);
}
// convenience mixin for grid-push
@mixin grid-pull($columns: 0, $of: false, $first: false, $method: position) {
  @include grid-offset($right: $columns, $of: $of, $first: false, $method: $method);
}

// this makes it possible to undo $first: true
// @mixin     grid-not-first
@mixin grid-not-first() {
  margin-left: $CONFIG_GRID_GUTTER;
}

// this makes it possible to force a non first-column to behave as a first-column
// @mixin     grid-is-first
@mixin grid-is-first() {
  margin-left: 0;
}

// given a set of values, output the left and right properties
// @mixin     grid-output-left-right
// @param     $property {String} prefix [margin|padding|border|etc] if false, no prefix is used
// @param     $values {List} the list of values to output e.g. (10px 5px). if only one value (10px), it's used for both left and right
// @param     $ignore {List} list of values to ignore, @see if-set
@mixin grid-output-left-right($property: false, $values: false, $ignore: false) {
  $property: if($property, unquote('#{$property}-'), unquote(''));
  $left: 0;
  @if(length($values) > 0) {
    $left: nth($values,1);
  }
  $right: 0;
  @if(length($values) > 1) {
    $right: nth($values,2);
  }
  @include if-set(#{$property}left, $left, $ignore: $ignore);
  @include if-set(#{$property}right, $right, $ignore: $ignore);
}

// this lets rows clear the floated containers
// @mixin     grid-row
// @param     $debug {Boolean} use debug stylings
@mixin grid-row($debug: false) {
  @include grid-block(true);
  @include debug-hover-box(rgb(255, 0, 255), $if: ($debug or $CONFIG_GRID_DEBUG));
}

// output the block methods
// @mixin     grid-block
// @param     $row {Boolean} is this block a row
@mixin grid-block($row: false) {
  // FLOAT
  @if($CONFIG_GRID_ALIGN_METHOD == float){
    @if($row) {
      @include legacy-pie-clearfix();
    }
    @else {
      // make it a floater
      float: left;
    }
  }
  // INLINE-BLOCK
  @else if($CONFIG_GRID_ALIGN_METHOD == inline-block) {
    @if($row) {
      // fix to collapse white space between inline-block elements
      letter-spacing: -0.313em; // webkit
      @if(support-legacy-browser('ie', '7', $threshold: $critical-usage-threshold)) {
        *letter-spacing: normal;  // restore for IE6/7
      }
      word-spacing: -0.438em;   // IE/firefox
      // other methods: no browsers support this yet
      // http://dev.w3.org/csswg/css3-text/#white-space-collapsing
      //white-space-collapse: discard;
      //text-space-collapse: collapse;
    }
    @else {
      @include inline-block();
      vertical-align: top;
      // restore spacing @see grid-row
      letter-spacing: normal;
      word-spacing:   normal;
    }
  }
  // TABLE-CELL (doesn't work well)
  @else if($CONFIG_GRID_ALIGN_METHOD == table-cell) {
    @warn "[archetype:grid] table-cell method doesn't work yet!";
    @if($row) {
      display: table;
      // table cells don't respect margin, so we have to use border-spacing
      border-spacing: $CONFIG_GRID_GUTTER 0;
    }
    @else {
      @if(support-legacy-browser('ie', '7', $threshold: $critical-usage-threshold)) {
        *display:       inline;
      }
      display:        table-cell;
      vertical-align: top;
      @include has-layout();
    }
  }
}

// convenience method for creating a grid canvas, @see grid
// @mixin     grid-canvas
// @param     $columns {Number} the number or fraction of columns to span, if fraction, must specify $of
// @param     $of {Number} the total number of columns spanned, only use with fractional $columns
// @param     $debug {Boolean} use debug stylings
@mixin grid-canvas($columns: false, $of: false, $debug: false) {
  @include grid($columns: $columns, $of: $of, $debug: $debug, $canvas: true);
}

// the main grid mixin
// @mixin     grid
// @param     $columns {Number} the number or fraction of columns to span, if fraction, must specify $of
// @param     $first {Boolean} is this the first grid block of a row
// @param     $of {Number} the total number of columns spanned, only use with fractional $columns
// @param     $indent {List} the grid indents @see grid-indent
// @param     $outdent {List} the grid outdents @see grid-outdent
// @param     $offset {List} the grid offsets @see grid-offset, grid-push, grid-pull
// @param     $canvas {Boolean} treat this grid block as a canvas; a canvas is a non-floated, centered grid-block
// @param     $row {Boolean} @see grid-row
// @param     $center {Boolean} whether or not to center the grid block
// @param     $debug {Boolean} use debug stylings
@mixin grid($columns: false, $first: false, $of: false, $indent: false, $outdent: false, $offset: false, $offset-method: $CONFIG_GRID_OFFSET_METHOD, $canvas: false, $row: false, $center: false, $debug: false) {
  @if($row) {
    @include grid-row($debug: $debug);
  }
  @else {
    @if(not $columns) {
      $columns: $CONFIG_GRID_MAX_COLUMNS;
    }

    $width: _getGridWidth($columns, $of, $indent);

    // margin
    @if(not ($first or $canvas or $center)) {
      @include grid-not-first();
    }

    @if($canvas or $center) {
      // center it
      margin-left:  auto;
      margin-right: auto;

      // debug
      @if(is-debug-enabled($debug or $CONFIG_GRID_DEBUG)) {
        @include column-grid-background($CONFIG_GRID_MAX_COLUMNS, $CONFIG_GRID_COLUMN, $CONFIG_GRID_GUTTER);
      }

      @if($CONFIG_GRID_ALIGN_METHOD == inline-block) {
        // the inline-block method needs to use horizontal overflow on the canvas to prevent an unwanted scrollbar
        //overflow-x: hidden;
      }
    }
    @else {
      // align the block
      @include grid-block();
      // debug
      @include debug-hover-box($if: ($debug or $CONFIG_GRID_DEBUG));
    }

    // offset (push, pull)
    @if($offset) {
      // ... with positioning
      @if($offset-method == position) {
        @include grid-offset-position($offset);
      }
      // ... with margin (adjust outdent)
      @else if($offset-method == margin) {
        @include grid-offset-margin($offset: $offset, $first: $first, $outdent: $outdent);
        $outdent: false;
      }
      // ... with padding (adjust indent)
      @else {
        $indent: list-add(get-collection($indent, 0, $min: 2), $offset);
      }
    }

    // indent
    @if($indent) {
      @include grid-output-left-right(padding, $indent);
    }

    // outdent
    @if($outdent) {
      @include grid-output-left-right(margin, $outdent);
      @include hack-negative-margin();
    }

    // width
    width: $width;
  }
}