# Capistrano Auto Scaling Group rolling deployments

[![Gem Version](https://badge.fury.io/rb/capistrano-asg-rolling.svg)](https://badge.fury.io/rb/capistrano-asg-rolling)
[![Build Status](https://github.com/KentaaNL/capistrano-asg-rolling/actions/workflows/test.yml/badge.svg)](https://github.com/KentaaNL/capistrano-asg-rolling/actions)
[![Code Climate](https://codeclimate.com/github/KentaaNL/capistrano-asg-rolling/badges/gpa.svg)](https://codeclimate.com/github/KentaaNL/capistrano-asg-rolling)

Capistrano plugin for performing rolling updates to AWS Auto Scaling Groups using the [instance refresh feature](https://docs.aws.amazon.com/autoscaling/ec2/userguide/asg-instance-refresh.html).

Instead of deploying to live servers, capistrano-asg-rolling will create a temporary instance for deployment and then trigger an instance refresh to perform a rolling update of the Auto Scaling Group(s). In more detail, during deployment it will:

- Launch an instance from the AMI defined in the Launch Template of the Auto Scaling Group(s).
- Deploy your application to the launched instances.
- After deployment, stop the instances and create an AMI for each instance.
- Create new Launch Template versions for the new AMIs.
- Trigger Instance Refresh on the Auto Scaling Group(s) to perform a rolling update.
- Delete any outdated Launch Template versions, AMIs and snapshots created by previous deployments.
- Terminate the no longer needed instances.

## Important

### Instance refresh

To better understand how Instance Refresh replaces instances, make sure to read the documentation:
https://docs.aws.amazon.com/autoscaling/ec2/userguide/instance-refresh-overview.html

### Launch Templates

This gem depends on Auto Scaling Groups with Launch Templates. Using an Auto Scaling Group with a Launch Configuration is not supported, and will raise an `Capistrano::ASG::Rolling::NoLaunchTemplate`.

Instance refresh uses the desired configuration to update the Launch Template version of the Auto Scaling Group after a succesful deployment. Setting the Launch Template version to `Latest` on the Auto Scaling Group is not needed.

### Experimental

Please note that this gem works well for our configuration / use case, but it might not fit yours. Any feedback using GitHub issues / pull requests, is much appreciated.

## Installation

Add this line to your application's Gemfile:

```ruby
gem 'capistrano-asg-rolling'
```

And then execute:

    $ bundle

Or install it yourself as:

    $ gem install capistrano-asg-rolling

Add the plugin to Capistrano's Capfile:

```ruby
# Capfile
require 'capistrano/asg/rolling'
install_plugin Capistrano::ASG::Rolling::Plugin
```

## Configuration

Below are the Capistrano configuration options:

Setup AWS credentials:

```ruby
# config/deploy.rb
set :aws_access_key_id,     ENV['AWS_ACCESS_KEY_ID']
set :aws_secret_access_key, ENV['AWS_SECRET_ACCESS_KEY']
set :aws_region,            ENV['AWS_REGION']
```

After deployment, any outdated Launch Template versions, AMIs and snapshots will be deleted. By default, the number of `keep_releases` will be kept. Change this with:

```ruby
# config/deploy.rb
set :asg_rolling_keep_versions, 10
```

Servers are added using their private IP address by default. Set to false to use the public IP address instead:

```ruby
# config/deploy.rb
set :asg_rolling_use_private_ip_address, false
```

Verbose logging is enabled by default, set to false for less verbose logging:

```ruby
# config/deploy.rb
set :asg_rolling_verbose, false
```

When launching an Instance, you can override any settings defined in the Launch Template with:

```ruby
# config/deploy.rb
set :asg_rolling_instance_overrides, { instance_type: 'c5.large' }
```

You can make Capistrano wait until the instances in the autoscaling group have completed refreshing with:

```ruby
# config/deploy.rb
set :asg_wait_for_instance_refresh, true
set :asg_instance_refresh_polling_interval, 30 # default
```

## Usage

Specify the Auto Scaling Groups with the keyword `autoscale` instead of using the `server` keyword in Capistrano's stage configuration. Provide the name of the Auto Scaling Group and any properties you want to pass to the server:

```ruby
# config/deploy/<stage>.rb
autoscale 'app-autoscale-group', user: 'deployer', roles: %w[db assets]
autoscale 'web-autoscale-group', user: 'deployer'
```

Now start a deployment with `cap <stage> deploy` and enjoy.

### Deploy without rolling update

There might be cases where you just want to deploy your code to the servers in the Auto Scaling Group(s) without a rolling update.

You can configure rolling updates per autoscaling group by using the `rolling` option:

```ruby
# config/deploy/<stage>.rb
autoscale 'app-autoscale-group', rolling: true    # default: use rolling deployment
autoscale 'web-autoscale-group', rolling: false   # override: use normal deployment
```

### Deploy with custom percentage of minimum/maximum healthy instances during the instance refresh

The instance refresh is triggered without specifying a value for the minimum / maximum healthy percentages. This means that either the default
values will be used (minimum: 90%, maximum: 100%) or the percentages set in the instance maintenance policy for the Auto Scaling Group.
You can tune both the minimum and maximum values to have more control about the desired capacity that must be healthy to proceed with replacing instances.

For example: reducing the minimum healthy percentage allows more instances to be terminated and new instances to be brought up at once during the instance refresh. eg. a value of 0 would terminate all instances in the autoscaling group and replace them at once.

You can configure the minimum healthy percentage per autoscaling group using the `min_healthy_percentage` option, and the maximum healthy percentage using the `max_healthy_percentage` option. Please note that if you specify `max_healthy_percentage`, you must also specify `min_healthy_percentage`.

```ruby
# config/deploy/<stage>.rb
autoscale 'app-autoscale-group',                                                           # use default percentages or percentages set in the instance maintenance policy
autoscale 'web-autoscale-group', min_healthy_percentage: 75                                # allow 25% of instances to be terminated and replaced at once
autoscale 'web-autoscale-group', min_healthy_percentage: 100, max_healthy_percentage: 110  # allow for 10% above desired capacity during instance refresh
```

### Custom stage

The rolling configuration of the stage has a side-effect: any Capistrano tasks you run, will also launch instances per Auto Scaling Group.

For example the command: `cap production rails:console`, will launch a new instance and run `rails:console` on that instance. While that can be useful, you often just want to run the task on the primary server. A solution is to create two stages with different rolling configurations, for example:

```ruby
# config/deploy/production.rb
set :stage, :production

autoscale 'app-autoscale-group', rolling: false, user: 'deployer', roles: %w[db assets]
autoscale 'web-autoscale-group', rolling: false, user: 'deployer'
```

and:

```ruby
# config/deploy/production_rolling.rb
set :stage, :production_rolling
set :rails_env, :production

autoscale 'app-autoscale-group', rolling: true, user: 'deployer', roles: %w[db assets]
autoscale 'web-autoscale-group', rolling: true, user: 'deployer'
```

With these two stages, you can run any tasks with `cap production <task name>` and rolling deployments with `cap production_rolling deploy`.

## Useful commands

### Test deployment

Do a test deployment: run the deploy task, but do not trigger the update ASG task and do not automatically terminate instances.

```bash
cap <stage> rolling:deploy_test
```

### Launch instances

Just launch instance(s) defined in the Auto Scale Group(s) launch template.
This instance is not attached to the Auto Scale Group and needs to be terminated manually.

```bash
cap <stage> rolling:launch_instances
```

### Create AMI of instance in ASG

Pick an instance in the Auto Scale Group(s), put it into standby and stop it.
Then create an AMI and a new launch template. Then start the instance and put it into service again.

```bash
cap <stage> rolling:create_ami
```

## Filtering

You can filter any command to run on a specific Auto Scale Group by using the parameter `asg_name`.

For example, the command:

```bash
cap <stage> deploy asg_name=app-autoscale-group
```

Will do a deployment only on the Auto Scale Group with the name `app-autoscale-group`.

## IAM policy

The following IAM permissions are required:

```json
{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": [
                "autoscaling:DescribeAutoScalingGroups",
                "autoscaling:DescribeAutoScalingInstances",
                "autoscaling:DescribeInstanceRefreshes",
                "autoscaling:EnterStandby",
                "autoscaling:ExitStandby",
                "autoscaling:StartInstanceRefresh",
                "ec2:CreateImage",
                "ec2:CreateLaunchTemplateVersion",
                "ec2:CreateTags",
                "ec2:DeleteLaunchTemplateVersions",
                "ec2:DeleteSnapshot",
                "ec2:DeregisterImage",
                "ec2:DescribeImages",
                "ec2:DescribeInstances",
                "ec2:DescribeLaunchTemplateVersions",
                "ec2:RunInstances",
                "ec2:StartInstances",
                "ec2:StopInstances",
                "ec2:TerminateInstances"
            ],
            "Resource": "*"
        }
    ]
}
```

## Development

After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake spec` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org).

## Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/KentaaNL/capistrano-asg-rolling. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](http://contributor-covenant.org) code of conduct.

## License

The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT).

## Code of Conduct

Everyone interacting in the Capistrano::ASG::Rolling project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the [code of conduct](https://github.com/KentaaNL/capistrano-asg-rolling/blob/master/CODE_OF_CONDUCT.md).