# frozen_string_literal: true
# Copyright 2020 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated by gapic-generator-ruby. DO NOT EDIT!
module Google
module Cloud
module Tasks
module V2beta2
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_queues ListQueues}.
# @!attribute [rw] parent
# @return [::String]
# Required. The location name.
# For example: `projects/PROJECT_ID/locations/LOCATION_ID`
# @!attribute [rw] filter
# @return [::String]
# `filter` can be used to specify a subset of queues. Any {::Google::Cloud::Tasks::V2beta2::Queue Queue}
# field can be used as a filter and several operators as supported.
# For example: `<=, <, >=, >, !=, =, :`. The filter syntax is the same as
# described in
# [Stackdriver's Advanced Logs
# Filters](https://cloud.google.com/logging/docs/view/advanced_filters).
#
# Sample filter "app_engine_http_target: *".
#
# Note that using filters might cause fewer queues than the
# requested_page size to be returned.
# @!attribute [rw] page_size
# @return [::Integer]
# Requested page size.
#
# The maximum page size is 9800. If unspecified, the page size will
# be the maximum. Fewer queues than requested might be returned,
# even if more queues exist; use the
# {::Google::Cloud::Tasks::V2beta2::ListQueuesResponse#next_page_token next_page_token} in the
# response to determine if more queues exist.
# @!attribute [rw] page_token
# @return [::String]
# A token identifying the page of results to return.
#
# To request the first page results, page_token must be empty. To
# request the next page of results, page_token must be the value of
# {::Google::Cloud::Tasks::V2beta2::ListQueuesResponse#next_page_token next_page_token} returned
# from the previous call to {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_queues ListQueues}
# method. It is an error to switch the value of the
# {::Google::Cloud::Tasks::V2beta2::ListQueuesRequest#filter filter} while iterating through pages.
# @!attribute [rw] read_mask
# @return [::Google::Protobuf::FieldMask]
# Optional. Read mask is used for a more granular control over what the API returns.
# If the mask is not present all fields will be returned except
# [Queue.stats]. [Queue.stats] will be returned only if it was explicitly
# specified in the mask.
class ListQueuesRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Response message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_queues ListQueues}.
# @!attribute [rw] queues
# @return [::Array<::Google::Cloud::Tasks::V2beta2::Queue>]
# The list of queues.
# @!attribute [rw] next_page_token
# @return [::String]
# A token to retrieve next page of results.
#
# To return the next page of results, call
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_queues ListQueues} with this value as the
# {::Google::Cloud::Tasks::V2beta2::ListQueuesRequest#page_token page_token}.
#
# If the next_page_token is empty, there are no more results.
#
# The page token is valid for only 2 hours.
class ListQueuesResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#get_queue GetQueue}.
# @!attribute [rw] name
# @return [::String]
# Required. The resource name of the queue. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
# @!attribute [rw] read_mask
# @return [::Google::Protobuf::FieldMask]
# Optional. Read mask is used for a more granular control over what the API returns.
# If the mask is not present all fields will be returned except
# [Queue.stats]. [Queue.stats] will be returned only if it was explicitly
# specified in the mask.
class GetQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#create_queue CreateQueue}.
# @!attribute [rw] parent
# @return [::String]
# Required. The location name in which the queue will be created.
# For example: `projects/PROJECT_ID/locations/LOCATION_ID`
#
# The list of allowed locations can be obtained by calling Cloud
# Tasks' implementation of
# [ListLocations][google.cloud.location.Locations.ListLocations].
# @!attribute [rw] queue
# @return [::Google::Cloud::Tasks::V2beta2::Queue]
# Required. The queue to create.
#
# [Queue's name][google.cloud.tasks.v2beta2.Queue.name] cannot be the same as an existing queue.
class CreateQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#update_queue UpdateQueue}.
# @!attribute [rw] queue
# @return [::Google::Cloud::Tasks::V2beta2::Queue]
# Required. The queue to create or update.
#
# The queue's {::Google::Cloud::Tasks::V2beta2::Queue#name name} must be specified.
#
# Output only fields cannot be modified using UpdateQueue.
# Any value specified for an output only field will be ignored.
# The queue's {::Google::Cloud::Tasks::V2beta2::Queue#name name} cannot be changed.
# @!attribute [rw] update_mask
# @return [::Google::Protobuf::FieldMask]
# A mask used to specify which fields of the queue are being updated.
#
# If empty, then all fields will be updated.
class UpdateQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#delete_queue DeleteQueue}.
# @!attribute [rw] name
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
class DeleteQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#purge_queue PurgeQueue}.
# @!attribute [rw] name
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
class PurgeQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#pause_queue PauseQueue}.
# @!attribute [rw] name
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
class PauseQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#resume_queue ResumeQueue}.
# @!attribute [rw] name
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/location/LOCATION_ID/queues/QUEUE_ID`
class ResumeQueueRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for listing tasks using {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_tasks ListTasks}.
# @!attribute [rw] parent
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
# @!attribute [rw] page_size
# @return [::Integer]
# Maximum page size.
#
# Fewer tasks than requested might be returned, even if more tasks exist; use
# {::Google::Cloud::Tasks::V2beta2::ListTasksResponse#next_page_token next_page_token} in the response to
# determine if more tasks exist.
#
# The maximum page size is 1000. If unspecified, the page size will be the
# maximum.
# @!attribute [rw] page_token
# @return [::String]
# A token identifying the page of results to return.
#
# To request the first page results, page_token must be empty. To
# request the next page of results, page_token must be the value of
# {::Google::Cloud::Tasks::V2beta2::ListTasksResponse#next_page_token next_page_token} returned
# from the previous call to {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_tasks ListTasks}
# method.
#
# The page token is valid for only 2 hours.
class ListTasksRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Response message for listing tasks using {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_tasks ListTasks}.
# @!attribute [rw] tasks
# @return [::Array<::Google::Cloud::Tasks::V2beta2::Task>]
# The list of tasks.
# @!attribute [rw] next_page_token
# @return [::String]
# A token to retrieve next page of results.
#
# To return the next page of results, call
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#list_tasks ListTasks} with this value as the
# {::Google::Cloud::Tasks::V2beta2::ListTasksRequest#page_token page_token}.
#
# If the next_page_token is empty, there are no more results.
class ListTasksResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for getting a task using {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#get_task GetTask}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
class GetTaskRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#create_task CreateTask}.
# @!attribute [rw] parent
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
#
# The queue must already exist.
# @!attribute [rw] task
# @return [::Google::Cloud::Tasks::V2beta2::Task]
# Required. The task to add.
#
# Task names have the following format:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`.
# The user can optionally specify a task {::Google::Cloud::Tasks::V2beta2::Task#name name}. If a
# name is not specified then the system will generate a random
# unique task id, which will be set in the task returned in the
# {::Google::Cloud::Tasks::V2beta2::Task#name response}.
#
# If {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} is not set or is in the
# past then Cloud Tasks will set it to the current time.
#
# Task De-duplication:
#
# Explicitly specifying a task ID enables task de-duplication. If
# a task's ID is identical to that of an existing task or a task
# that was deleted or completed recently then the call will fail
# with [ALREADY_EXISTS][google.rpc.Code.ALREADY_EXISTS].
# If the task's queue was created using Cloud Tasks, then another task with
# the same name can't be created for ~1hour after the original task was
# deleted or completed. If the task's queue was created using queue.yaml or
# queue.xml, then another task with the same name can't be created
# for ~9days after the original task was deleted or completed.
#
# Because there is an extra lookup cost to identify duplicate task
# names, these {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#create_task CreateTask} calls have significantly
# increased latency. Using hashed strings for the task id or for
# the prefix of the task id is recommended. Choosing task ids that
# are sequential or have sequential prefixes, for example using a
# timestamp, causes an increase in latency and error rates in all
# task commands. The infrastructure relies on an approximately
# uniform distribution of task ids to store and serve tasks
# efficiently.
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
class CreateTaskRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for deleting a task using
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#delete_task DeleteTask}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
class DeleteTaskRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for leasing tasks using {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks}.
# @!attribute [rw] parent
# @return [::String]
# Required. The queue name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID`
# @!attribute [rw] max_tasks
# @return [::Integer]
# The maximum number of tasks to lease.
#
# The system will make a best effort to return as close to as
# `max_tasks` as possible.
#
# The largest that `max_tasks` can be is 1000.
#
# The maximum total size of a {::Google::Cloud::Tasks::V2beta2::LeaseTasksResponse lease tasks response} is
# 32 MB. If the sum of all task sizes requested reaches this limit,
# fewer tasks than requested are returned.
# @!attribute [rw] lease_duration
# @return [::Google::Protobuf::Duration]
# Required. The duration of the lease.
#
# Each task returned in the {::Google::Cloud::Tasks::V2beta2::LeaseTasksResponse response} will
# have its {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} set to the current
# time plus the `lease_duration`. The task is leased until its
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time}; thus, the task will not be
# returned to another {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks} call
# before its {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time}.
#
#
# After the worker has successfully finished the work associated
# with the task, the worker must call via
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#acknowledge_task AcknowledgeTask} before the
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time}. Otherwise the task will be
# returned to a later {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks} call so
# that another worker can retry it.
#
# The maximum lease duration is 1 week.
# `lease_duration` will be truncated to the nearest second.
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
# @!attribute [rw] filter
# @return [::String]
# `filter` can be used to specify a subset of tasks to lease.
#
# When `filter` is set to `tag=<my-tag>` then the
# {::Google::Cloud::Tasks::V2beta2::LeaseTasksResponse response} will contain only tasks whose
# {::Google::Cloud::Tasks::V2beta2::PullMessage#tag tag} is equal to `<my-tag>`. `<my-tag>` must be
# less than 500 characters.
#
# When `filter` is set to `tag_function=oldest_tag()`, only tasks which have
# the same tag as the task with the oldest
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} will be returned.
#
# Grammar Syntax:
#
# * `filter = "tag=" tag | "tag_function=" function`
#
# * `tag = string`
#
# * `function = "oldest_tag()"`
#
# The `oldest_tag()` function returns tasks which have the same tag as the
# oldest task (ordered by schedule time).
#
# SDK compatibility: Although the SDK allows tags to be either
# string or
# [bytes](https://cloud.google.com/appengine/docs/standard/java/javadoc/com/google/appengine/api/taskqueue/TaskOptions.html#tag-byte:A-),
# only UTF-8 encoded tags can be used in Cloud Tasks. Tag which
# aren't UTF-8 encoded can't be used in the
# {::Google::Cloud::Tasks::V2beta2::LeaseTasksRequest#filter filter} and the task's
# {::Google::Cloud::Tasks::V2beta2::PullMessage#tag tag} will be displayed as empty in Cloud Tasks.
class LeaseTasksRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Response message for leasing tasks using {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks}.
# @!attribute [rw] tasks
# @return [::Array<::Google::Cloud::Tasks::V2beta2::Task>]
# The leased tasks.
class LeaseTasksResponse
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for acknowledging a task using
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#acknowledge_task AcknowledgeTask}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
# @!attribute [rw] schedule_time
# @return [::Google::Protobuf::Timestamp]
# Required. The task's current schedule time, available in the
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} returned by
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks} response or
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#renew_lease RenewLease} response. This restriction is
# to ensure that your worker currently holds the lease.
class AcknowledgeTaskRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for renewing a lease using
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#renew_lease RenewLease}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
# @!attribute [rw] schedule_time
# @return [::Google::Protobuf::Timestamp]
# Required. The task's current schedule time, available in the
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} returned by
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks} response or
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#renew_lease RenewLease} response. This restriction is
# to ensure that your worker currently holds the lease.
# @!attribute [rw] lease_duration
# @return [::Google::Protobuf::Duration]
# Required. The desired new lease duration, starting from now.
#
#
# The maximum lease duration is 1 week.
# `lease_duration` will be truncated to the nearest second.
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
class RenewLeaseRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for canceling a lease using
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#cancel_lease CancelLease}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
# @!attribute [rw] schedule_time
# @return [::Google::Protobuf::Timestamp]
# Required. The task's current schedule time, available in the
# {::Google::Cloud::Tasks::V2beta2::Task#schedule_time schedule_time} returned by
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#lease_tasks LeaseTasks} response or
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#renew_lease RenewLease} response. This restriction is
# to ensure that your worker currently holds the lease.
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
class CancelLeaseRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
# Request message for forcing a task to run now using
# {::Google::Cloud::Tasks::V2beta2::CloudTasks::Client#run_task RunTask}.
# @!attribute [rw] name
# @return [::String]
# Required. The task name. For example:
# `projects/PROJECT_ID/locations/LOCATION_ID/queues/QUEUE_ID/tasks/TASK_ID`
# @!attribute [rw] response_view
# @return [::Google::Cloud::Tasks::V2beta2::Task::View]
# The response_view specifies which subset of the {::Google::Cloud::Tasks::V2beta2::Task Task} will be
# returned.
#
# By default response_view is {::Google::Cloud::Tasks::V2beta2::Task::View::BASIC BASIC}; not all
# information is retrieved by default because some data, such as
# payloads, might be desirable to return only when needed because
# of its large size or because of the sensitivity of data that it
# contains.
#
# Authorization for {::Google::Cloud::Tasks::V2beta2::Task::View::FULL FULL} requires
# `cloudtasks.tasks.fullView` [Google IAM](https://cloud.google.com/iam/)
# permission on the {::Google::Cloud::Tasks::V2beta2::Task Task} resource.
class RunTaskRequest
include ::Google::Protobuf::MessageExts
extend ::Google::Protobuf::MessageExts::ClassMethods
end
end
end
end
end