require "spec_helper" RSpec.describe Metanorma::Requirements::Iso::Modspec do it "treates Modspec requirements as tables for cross-referencing" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2
Introduction

INPUT presxml = <<~OUTPUT Preface
Table 1
Table 2 — Permission 1: First
Identifier /ogc/recommendation/wfs/2
Table 3
 Introduction

Table 1 Table 2, Permission 1 Table 3

OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes permissions" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 RFC 2616 (HTTP/1.1) user control-class Technical priority P0 family System and Communications Protection family System and Communications Protocols

I recommend this.

This is the object of the recommendation:

Object Value Accomplished
A
B
C
D

The measurement target shall be measured as:

r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end success-response()

TEST PURPOSE

TEST METHOD

CONDITIONS

FIRST PART

SECOND PART

THIRD PART

REFERENCE PART

PANDA PART

 Bibliography 2020-03-27 Hypertext Transfer Protocol — HTTP/1.1 https://xml2rfc.tools.ietf.org/public/rfc/bibxml/reference.RFC.2616.xml https://www.rfc-editor.org/info/rfc2616 RFC 2616 RFC2616 10.17487/RFC2616 1999-06 R. Fielding IETF IETF J. Gettys IETF IETF J. Mogul IETF IETF H. Frystyk IETF IETF L. Masinter IETF IETF P. Leach IETF IETF T. Berners-Lee IETF IETF en HTTP has been in use by the World-Wide Web global information initiative since 1990. This specification defines the protocol referred to as “HTTP/1.1”, and is an update to RFC 2068. [STANDARDS-TRACK] RFC 2616 Fremont, CA INPUT presxml = <<~OUTPUT Preface Table 1 — Permission 1: First
Identifier/ogc/recommendation/wfs/2
Subjectuser
Dependency/ss/584/2015/level/1
DependencyRFC 2616 (HTTP/1.1)
Control-class Technical
Priority P0
Family System and Communications Protection
Family System and Communications Protocols
Statement

I recommend this .

Statement
A
B
C
D

The measurement target shall be measured as:

1 r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end
Test purpose

TEST PURPOSE
Test method

TEST METHOD
Conditions

CONDITIONS
A

FIRST PART
B

SECOND PART
C

THIRD PART
Reference

REFERENCE PART
Panda GHz express

PANDA PART
Bibliography Hypertext Transfer Protocol — HTTP/1.1 https://xml2rfc.tools.ietf.org/public/rfc/bibxml/reference.RFC.2616.xml https://www.rfc-editor.org/info/rfc2616 [1] IETF RFC 2616 IETF RFC2616 DOI 10.17487/RFC2616 OUTPUT html = <<~OUTPUT

 


 



Preface

Table 1 — Permission 1: First

Identifier /ogc/recommendation/wfs/2
Subject user
Dependency /ss/584/2015/level/1
Dependency RFC 2616 (HTTP/1.1)
Control-class Technical
Priority P0
Family System and Communications Protection
Family System and Communications Protocols
Statement

I recommend this .

Statement

A

B

C

D

The measurement target shall be measured as:

(#(r/1 = 0)#)   (1)

The following code will be run for verification:

                       

                             CoreRoot(success): HttpResponse
                       if (success)
                       

                             recommendation(label:
                       success-response) end
                       

                          
Test purpose

TEST PURPOSE
Test method

TEST METHOD
Conditions

CONDITIONS
A

FIRST PART
B

SECOND PART
C

THIRD PART
Reference

REFERENCE PART
Panda GHz express

PANDA PART


Bibliography

[1]  IETF RFC 2616, Hypertext Transfer Protocol — HTTP/1.1

OUTPUT doc = <<~OUTPUT

 



Preface

Table 1 — Permission 1: First

Identifier /ogc/recommendation/wfs/2
Subject user
Dependency /ss/584/2015/level/1
Dependency RFC 2616 (HTTP/1.1)
Control-class Technical
Priority P0
Family System and Communications Protection
Family System and Communications Protocols
Statement

I recommend this .

Statement

A

B

C

D

The measurement target shall be measured as:

(#(r/1 = 0)#)   (1)

The following code will be run for verification:


      CoreRoot(success): HttpResponse if (success)
      recommendation(label: success-response) end
   

Test purpose

TEST PURPOSE
Test method

TEST METHOD
Conditions

CONDITIONS
A

FIRST PART
B

SECOND PART
C

THIRD PART
Reference

REFERENCE PART
Panda GHz express

PANDA PART

 



Bibliography

[1]   IETF RFC 2616, Hypertext Transfer Protocol — HTTP/1.1


OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) expect(xmlpp(IsoDoc::Iso::HtmlConvert.new({}) .convert("test", presxml, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(html) expect(xmlpp(IsoDoc::Iso::WordConvert.new({}) .convert("test", presxml, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(doc) end it "processes permission verifications" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 user control-class Technical priority P0 family System and Communications Protection family System and Communications Protocols

I recommend this.

This is the object of the recommendation:

Object Value Accomplished
A
B
C
D

The measurement target shall be measured as:

r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end success-response() INPUT presxml = <<~OUTPUT Preface Table 1 — Conformance test 1: First
Identifier /ogc/recommendation/wfs/2
Subject user
Dependency /ss/584/2015/level/1
Control-class Technical
Priority P0
Family System and Communications Protection
Family System and Communications Protocols
Statement

I recommend this .

Statement
A
B
C
D

The measurement target shall be measured as:

1 r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end#{' '}
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes abstract tests" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 user control-class Technical priority P0 family System and Communications Protection family System and Communications Protocols

I recommend this.

This is the object of the recommendation:

Object Value Accomplished
A
B
C
D

The measurement target shall be measured as:

r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end success-response() INPUT presxml = <<~OUTPUT Preface Table 1 — Abstract test 1: First
Identifier/ogc/recommendation/wfs/2
Subjectuser
Dependency/ss/584/2015/level/1
Control-classTechnical
PriorityP0
FamilySystem and Communications Protection
FamilySystem and Communications Protocols
Statement

I recommend this.

Statement
A
B
C
D

The measurement target shall be measured as:

1 r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes permission classes" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 /ss/584/2015/level/2 user First #1 /ogc/recommendation/wfs/10 First #2 Requirement 1 First #3 Recommendation 1 Second /ogc/recommendation/wfs/10 INPUT presxml = <<~OUTPUT Preface Table 1 — Permissions class 1: First
Identifier /ogc/recommendation/wfs/2
Target type user
Dependency /ss/584/2015/level/1
Dependency /ss/584/2015/level/2
Provisions Permission 1: Second
Requirement 1-1: First #2
Recommendation 1-1: First #3
Table 2 — Permission 1: Second
Identifier /ogc/recommendation/wfs/10
Included in Permissions class 1: First
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes conformance classes" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 ABC user targetABC indirect-dependency indirect-dependencyABC Permission 1 Requirement 1 Recommendation 1 Second ABC Third Permission 1 INPUT presxml = <<~OUTPUT Preface Table 1 — Conformance class 1: First
Identifier /ogc/recommendation/wfs/2
Subject user
Requirements class Conformance class 2: Second
Dependency /ss/584/2015/level/1
Dependency Conformance class 2: Second
Indirect Dependency
Indirect Dependency Conformance class 2: Second
Conformance tests Permission 1: Third
Requirement 1-1
Recommendation 1-1
Table 2 — Conformance class 2: Second
Identifier ABC
Table 3 — Permission 1: Third
Identifier Permission 1
Included in Conformance class 1: First
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes conformance classes in French" do input = <<~INPUT fr Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 ABC user targetABC indirect-dependency indirect-dependencyABC Permission 1 Requirement 1 Recommendation 1 Second ABC Third Permission 1 INPUT presxml = <<~OUTPUT fr Preface Tableau 1 — Classe de confirmité 1 : First
Identifiant /ogc/recommendation/wfs/2
Sujet user
Classe d’exigences Classe de confirmité 2 : Second
Dépendance /ss/584/2015/level/1
Dépendance Classe de confirmité 2 : Second
Dépendance indirecte
Dépendance indirecte Classe de confirmité 2 : Second
Tests de conformité Autorisation 1 : Third
Exigence 1-1
Recommandation 1-1
Tableau 2 — Classe de confirmité 2 : Second
Identifiant ABC
Tableau 3 — Autorisation 1 : Third
Identifiant Permission 1
Inclus dans Classe de confirmité 1 : First
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{.*}m, "") .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes requirement classes" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 /ss/584/2015/level/2 user First #1 Permission 1 First #2 Requirement 1 First #3 Recommendation 1 Second Permission 1 INPUT presxml = <<~OUTPUT Preface Table 1 — Requirements class 1: First
Identifier /ogc/recommendation/wfs/2
Target type user
Dependency /ss/584/2015/level/1
Dependency /ss/584/2015/level/2
Provisions Permission 1: Second
Requirement 1-1: First #2
Recommendation 1-1: First #3
Table 2 — Permission 1: Second
Identifier Permission 1
Included in Requirements class 1: First
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes recommendation classes" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 /ss/584/2015/level/2 user First #1 Permission 1 First #2 Requirement 1 First #3 Recommendation 1 INPUT presxml = <<~OUTPUT Preface Table 1 — Recommendations class 1: First
Identifier /ogc/recommendation/wfs/2
Target type user
Dependency /ss/584/2015/level/1
Dependency /ss/584/2015/level/2
Provisions Permission 1-1: First #1
Requirement 1-1: First #2
Recommendation 1-1: First #3
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes requirements" do input = <<~INPUT Preface A New Requirement /ogc/recommendation/wfs/2 /ss/584/2015/level/1 user

I recommend this.

This is the object of the recommendation:

Object Value
Mission Accomplished

As for the measurement targets,

The measurement target shall be measured as:

r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end success-response() INPUT presxml = <<~OUTPUT Preface Table — Requirement: A New Requirement
Identifier /ogc/recommendation/wfs/2
Subject user
Dependency /ss/584/2015/level/1
Statement

I recommend this .

Statement

As for the measurement targets,

The measurement target shall be measured as:

1 r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end it "processes recommendations" do input = <<~INPUT Preface First /ogc/recommendation/wfs/2 /ss/584/2015/level/1 user

I recommend this.

This is the object of the recommendation:

Object Value
Mission Accomplished

As for the measurement targets,

The measurement target shall be measured as:

r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end success-response() INPUT presxml = <<~OUTPUT Preface Table 1 — Recommendation 1: First
Identifier /ogc/recommendation/wfs/2
Subject user
Dependency /ss/584/2015/level/1
Statement

I recommend this .

Statement

As for the measurement targets,

The measurement target shall be measured as:

1 r/1 = 0

The following code will be run for verification:

CoreRoot(success): HttpResponse if (success) recommendation(label: success-response) end
OUTPUT expect(xmlpp(IsoDoc::Iso::PresentationXMLConvert.new({}) .convert("test", input, true) .gsub(%r{^.*.*}m, ""))) .to be_equivalent_to xmlpp(presxml) end end