# frozen_string_literal: true

# *******************************************************************************
# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
# All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# (1) Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# (2) Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# (3) Neither the name of the copyright holder nor the names of any contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission from the respective party.
#
# (4) Other than as required in clauses (1) and (2), distributions in any form
# of modifications or other derivative works may not use the "OpenStudio"
# trademark, "OS", "os", or any other confusingly similar designation without
# specific prior written permission from Alliance for Sustainable Energy, LLC.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# *******************************************************************************

# see the URL below for information on how to write OpenStudio measures
# http://openstudio.nrel.gov/openstudio-measure-writing-guide

# see the URL below for information on using life cycle cost objects in OpenStudio
# http://openstudio.nrel.gov/openstudio-life-cycle-examples

# see the URL below for access to C++ documentation on model objects (click on "model" in the main window to view model objects)
# http://openstudio.nrel.gov/sites/openstudio.nrel.gov/files/nv_hash/cpp_documentation_it/model/html/namespaces.html

# load OpenStudio measure libraries from openstudio-extension gem
require 'openstudio-extension'
require 'openstudio/extension/core/os_lib_constructions'

# load OpenStudio measure libraries
require "#{File.dirname(__FILE__)}/resources/OsLib_AedgMeasures"

# start the measure
class ZEDGK12ExteriorWallConstruction < OpenStudio::Measure::ModelMeasure
  include OsLib_AedgMeasures
  include OsLib_Constructions

  # define the name that a user will see, this method may be deprecated as
  # the display name in PAT comes from the name field in measure.xml
  def name
    return 'ZEDG K12 ExteriorWallConstruction'
  end

  # define the arguments that the user will input
  def arguments(model)
    args = OpenStudio::Measure::OSArgumentVector.new

    # make an argument for material and installation cost
    material_cost_insulation_increase_ip = OpenStudio::Measure::OSArgument.makeDoubleArgument('material_cost_insulation_increase_ip', true)
    material_cost_insulation_increase_ip.setDisplayName('Increase Cost per Area of Construction Where Insulation was Improved ($/ft^2).')
    material_cost_insulation_increase_ip.setDefaultValue(0.0)
    args << material_cost_insulation_increase_ip

    return args
  end

  # define what happens when the measure is run
  def run(model, runner, user_arguments)
    super(model, runner, user_arguments)

    # use the built-in error checking
    if !runner.validateUserArguments(arguments(model), user_arguments)
      return false
    end

    # assign the user inputs to variables
    material_cost_insulation_increase_ip = runner.getDoubleArgumentValue('material_cost_insulation_increase_ip', user_arguments)

    # no validation needed for cost inputs, negative values are fine, however negative would be odd choice since this measure only improves vs. decreases insulation and SRI performance

    # global variables for costs
    expected_life = 25
    years_until_costs_start = 0
    material_cost_insulation_increase_si = OpenStudio.convert(material_cost_insulation_increase_ip, '1/ft^2', '1/m^2').get
    running_cost_insulation = 0

    # prepare rule hash
    rules = [] # climate zone, wall type, thermal transmittance (Btu/h·ft2·°F)

    # zedg doesn't have wall type lookup like aedg, altert user of this
    runner.registerInfo('Wall insulation values based on Steel Framed walls.')

    rules << ['0', 'SteelFramed', 0.124] # # measure setup to use only for this target and wall type
    rules << ['1', 'SteelFramed', 0.077] # higher conductance than 50% AEDG
    rules << ['2', 'SteelFramed', 0.077] # higher conductance than 50% AEDG
    rules << ['3', 'SteelFramed', 0.064] # nc
    rules << ['4', 'SteelFramed', 0.061]
    rules << ['5', 'SteelFramed', 0.052] # higher conductance than 50% AEDG
    rules << ['6', 'SteelFramed', 0.047] # higher conductance than 50% AEDG
    rules << ['7', 'SteelFramed', 0.047] # higher conductance than 50% AEDG
    rules << ['8', 'SteelFramed', 0.035]

    # make rule hash for cleaner code
    rulesHash = {}
    rules.each do |rule|
      rulesHash["#{rule[0]} #{rule[1]}"] = { 'conductivity_ip' => rule[2] }
    end

    # get climate zone
    climateZoneNumber = OsLib_AedgMeasures.getClimateZoneNumber(model, runner)
    # climateZoneNumber = "4" # this is just in for quick testing of different climate zones

    # return false with error if can't find climate zone number
    if climateZoneNumber == false
      return false
    end

    # get starting r-value
    startingRvaluesExtWall = []

    # flag for wall surface type for tips
    massFlag = false
    steelFramedFlag = false
    woodFramedFlag = false
    metalFlag = false

    # affected area counter
    insulation_affected_area = 0

    # construction hashes  (construction is key, value is array [thermal transmittance (Btu/h·ft2·°F),rule thermal transmittance (Btu/h·ft2·°F),classification string)
    massConstructions = {}
    steelFramedConstructions = {}
    woodFramedConstructions = {}
    metalConstructions = {}

    # this contains constructions that do not have a recognized Standards Construction Type
    otherConstructions = []

    # loop through constructions
    constructions = model.getConstructions
    constructions.each do |construction|
      # skip if not used
      next if construction.getNetArea <= 0

      # skip if not opaque
      next if !construction.isOpaque

      # get construction and standard
      constructionStandard = construction.standardsInformation

      # get intended surface and standards construction type
      intendedSurfaceType = constructionStandard.intendedSurfaceType

      # because it is assumed to be SteelFramed, hard code vs. inspecting construction
      # constructionType = constructionStandard.standardsConstructionType
      constructionType = 'SteelFramed'

      # get conductivity
      conductivity_si = construction.thermalConductance.get
      r_value_ip = OpenStudio.convert(1 / conductivity_si, 'm^2*K/W', 'ft^2*h*R/Btu').get

      # check rules based on intended use and type
      if intendedSurfaceType.to_s == 'ExteriorWall' # this should not include attics as they will be "Attic Wall"

        if constructionType.to_s == 'Mass'

          # store starting values
          startingRvaluesExtWall << r_value_ip
          massFlag = true

          # test construction against rules
          ruleSet = rulesHash["#{climateZoneNumber} Mass"]
          if 1 / r_value_ip > ruleSet['conductivity_ip']
            massConstructions[construction] = { 'conductivity_ip' => 1 / r_value_ip, 'transmittance_ip_rule' => ruleSet['conductivity_ip'], 'classification' => 'massConstructions' }
          end

        elsif constructionType.to_s == 'SteelFramed'

          # store starting values
          startingRvaluesExtWall << r_value_ip
          steelFramedFlag = true

          # test construction against rules
          ruleSet = rulesHash["#{climateZoneNumber} SteelFramed"]
          if 1 / r_value_ip > ruleSet['conductivity_ip']
            steelFramedConstructions[construction] = { 'conductivity_ip' => 1 / r_value_ip, 'transmittance_ip_rule' => ruleSet['conductivity_ip'], 'classification' => 'steelFramedConstructions' }
          end

        elsif constructionType.to_s == 'WoodFramed'

          # store starting values
          startingRvaluesExtWall << r_value_ip
          woodFramedFlag = true

          # test construction against rules
          ruleSet = rulesHash["#{climateZoneNumber} WoodFramed"]
          if 1 / r_value_ip > ruleSet['conductivity_ip']
            woodFramedConstructions[construction] = { 'conductivity_ip' => 1 / r_value_ip, 'transmittance_ip_rule' => ruleSet['conductivity_ip'], 'classification' => 'woodFramedConstructions' }
          end

        elsif constructionType.to_s == 'Metal'

          # store starting values
          startingRvaluesExtWall << r_value_ip
          metalFlag = true

          # test construction against rules
          ruleSet = rulesHash["#{climateZoneNumber} Metal"]
          if 1 / r_value_ip > ruleSet['conductivity_ip']
            metalConstructions[construction] = { 'conductivity_ip' => 1 / r_value_ip, 'transmittance_ip_rule' => ruleSet['conductivity_ip'], 'classification' => 'metalConstructions' }
          end

        else
          # track other constructions
          otherConstructions << construction
        end

      end
    end

    # create warning if construction used on exterior wall doesn't have a surface type of "ExteriorWall", or if constructions tagged to be used as exterior wall, are used on other surface types
    otherConstructionsWarned = []
    surfaces = model.getSurfaces
    surfaces.each do |surface|
      if !surface.construction.empty?
        construction = surface.construction.get

        if (surface.outsideBoundaryCondition == 'Outdoors') && (surface.surfaceType == 'Wall')

          if otherConstructions.include?(construction) && (!otherConstructionsWarned.include? construction)
            runner.registerWarning("#{construction.name} is used on one or more exterior wall surfaces but has an intended surface type or construction type not recognized by this measure. As we can not infer the proper performance target, this construction will not be altered.")
            otherConstructionsWarned << construction
          end

        else

          if massConstructions.include?(construction) || steelFramedConstructions.include?(construction) || woodFramedConstructions.include?(construction) || metalConstructions.include?(construction)
            runner.registerWarning("#{surface.name} uses #{construction.name} as a construction that this measure expects to be used for exterior walls. This surface has a type of #{surface.surfaceType} and a a boundary condition of #{surface.outsideBoundaryCondition}. This may result in unexpected changes to your model.")
          end

        end

      end
    end

    # alter constructions and add lcc
    constructionsToChange = massConstructions.sort + steelFramedConstructions.sort + woodFramedConstructions.sort + metalConstructions.sort
    constructionsToChange.each do |construction, hash|
      # gather insulation inputs

      # gather target decrease in conductivity
      conductivity_ip_starting = hash['conductivity_ip']
      conductivity_si_starting = OpenStudio.convert(conductivity_ip_starting, 'Btu/ft^2*h*R', 'W/m^2*K').get
      r_value_ip_starting = 1 / conductivity_ip_starting # ft^2*h*R/Btu
      r_value_si_starting = 1 / conductivity_si_starting # m^2*K/W
      conductivity_ip_target = hash['transmittance_ip_rule'].to_f
      conductivity_si_target = OpenStudio.convert(conductivity_ip_target, 'Btu/ft^2*h*R', 'W/m^2*K').get
      r_value_ip_target = 1 / conductivity_ip_target # ft^2*h*R/Btu
      r_value_si_target = 1 / conductivity_si_target # m^2*K/W

      # infer insulation material to get input for target thickness
      minThermalResistance = OpenStudio.convert(1, 'ft^2*h*R/Btu', 'm^2*K/W').get
      inferredInsulationLayer = OsLib_Constructions.inferInsulationLayer(construction, minThermalResistance)
      rvalue_si_deficiency = r_value_si_target - r_value_si_starting

      # add lcc for insulation
      lcc_mat_insulation = OpenStudio::Model::LifeCycleCost.createLifeCycleCost("LCC_Mat_Insulation - #{construction.name}", construction, material_cost_insulation_increase_si, 'CostPerArea', 'Construction', expected_life, years_until_costs_start)
      lcc_mat_insulation_value = lcc_mat_insulation.get.totalCost
      running_cost_insulation += lcc_mat_insulation_value

      # adjust existing material or add new one
      if (inferredInsulationLayer['insulationFound'] && (hash['classification'] == 'massConstructions')) || (inferredInsulationLayer['insulationFound'] && (hash['classification'] == 'metalConstructions')) # if insulation layer was found

        # gather inputs for method
        target_material_rvalue_si = inferredInsulationLayer['construction_thermal_resistance'] + rvalue_si_deficiency

        # run method to change insulation layer thickness in cloned material (material,starting_r_value_si,target_r_value_si, model)
        new_material = OsLib_Constructions.setMaterialThermalResistance(inferredInsulationLayer['construction_layer'], target_material_rvalue_si)

        # connect new material to original construction
        construction.eraseLayer(inferredInsulationLayer['layer_index'])
        construction.insertLayer(inferredInsulationLayer['layer_index'], new_material)

        # get conductivity
        final_conductivity_si = construction.thermalConductance.get
        final_r_value_ip = OpenStudio.convert(1 / final_conductivity_si, 'm^2*K/W', 'ft^2*h*R/Btu').get

        # report on edited material
        runner.registerInfo("The R-value of #{construction.name} has been increased from #{OpenStudio.toNeatString(r_value_ip_starting, 2, true)} to #{OpenStudio.toNeatString(final_r_value_ip, 2, true)}(ft^2*h*R/Btu) at a cost of $#{OpenStudio.toNeatString(lcc_mat_insulation_value, 2, true)}. Increased performance was accomplished by adjusting thermal resistance of #{new_material.name}.")

      else

        # inputs to pass to method
        conductivity = 0.045 # W/m*K
        thickness = rvalue_si_deficiency * conductivity # meters

        addNewLayerToConstruction_Inputs = {
          'roughness' => 'MediumRough',
          'thickness' => thickness, # meters,
          'conductivity' => conductivity, # W/m*K
          'density' => 265.0,
          'specificHeat' => 836.8,
          'thermalAbsorptance' => 0.9,
          'solarAbsorptance' => 0.7,
          'visibleAbsorptance' => 0.7
        }

        # if wall is metal, than new layer should go at index 1 vs. 0
        if hash['classification'] == 'metalConstructions'
          addNewLayerToConstruction_Inputs['layerIndex'] = 1
        end

        # create new material if can't infer insulation material (construction,thickness, conductivity, density, specificHeat, roughness,thermalAbsorptance, solarAbsorptance,visibleAbsorptance,model)
        newMaterialLayer = OsLib_Constructions.addNewLayerToConstruction(construction, addNewLayerToConstruction_Inputs)

        # get conductivity
        final_conductivity_si = construction.thermalConductance.get
        final_r_value_ip = OpenStudio.convert(1 / final_conductivity_si, 'm^2*K/W', 'ft^2*h*R/Btu').get

        # report on edited material
        if hash['classification'] == 'metalConstructions'
          runner.registerInfo("The R-value of #{construction.name} has been increased from #{OpenStudio.toNeatString(r_value_ip_starting, 2, true)} to #{OpenStudio.toNeatString(final_r_value_ip, 2, true)}(ft^2*h*R/Btu) at a cost of $#{OpenStudio.toNeatString(lcc_mat_insulation_value, 2, true)}. Increased performance was accomplished by adding a new material layer to the second layer of #{construction.name}.")
        else
          runner.registerInfo("The R-value of #{construction.name} has been increased from #{OpenStudio.toNeatString(r_value_ip_starting, 2, true)} to #{OpenStudio.toNeatString(final_r_value_ip, 2, true)}(ft^2*h*R/Btu) at a cost of $#{OpenStudio.toNeatString(lcc_mat_insulation_value, 2, true)}. Increased performance was accomplished by adding a new material layer to the outside of #{construction.name}.")
        end

      end

      # add to area counter
      insulation_affected_area += construction.getNetArea # OpenStudio handles matched surfaces so they are not counted twice.
    end

    # reporting initial condition of model
    startingRvalue = startingRvaluesExtWall

    runner.registerInitialCondition("Starting R-values for constructions intended for exterior wall surfaces range from #{OpenStudio.toNeatString(startingRvalue.min, 2, true)} to #{OpenStudio.toNeatString(startingRvalue.max, 2, true)}(ft^2*h*R/Btu).")

    # reporting final condition of model
    insulation_affected_area_ip = OpenStudio.convert(insulation_affected_area, 'm^2', 'ft^2').get
    runner.registerFinalCondition("#{OpenStudio.toNeatString(insulation_affected_area_ip, 0, true)}(ft^2) of constructions intended for exterior wall surfaces had insulation enhanced at a cost of $#{OpenStudio.toNeatString(running_cost_insulation, 0, true)}.")

    return true
  end
end

# this allows the measure to be use by the application
ZEDGK12ExteriorWallConstruction.new.registerWithApplication