---

production:
  pid_dir: /var/run/flapjack/
  log_dir: /var/log/flapjack/
  daemonize: yes
  logger:
    level: INFO
    syslog_errors: yes
  redis:
    host: 127.0.0.1
    port: 6380
    db: 0
  # Processes monitoring events off the *events* queue (a redis list) and decides
  # what actions to take (generate notification event, record state changes, etc)
  processor:
    enabled: yes
    queue: events
    notifier_queue: notifications
    archive_events: true
    events_archive_maxage: 10800
    # Flapjack sets scheduled maintenance on new check results so contacts aren't
    # notified as soon as Flapjack becomes aware of an entity to notify on.
    # This is useful is cases where your monitoring starts checking something
    # before it is completely provisioned
    # Value parsed by https://github.com/hpoydar/chronic_duration
    # You can disable this setting by specifying "0 seconds".
    new_check_scheduled_maintenance_duration: 100 years
    new_check_scheduled_maintenance_ignore_tags:
      - bypass_ncsm
    logger:
      level: INFO
      syslog_errors: yes
  # Processes notification events off the *notifications* queue (a redis list) and
  # works out who to notify, and on which media, and with what kind of notification
  # message. It then creates jobs for the various notification gateways below.
  notifier:
    enabled: yes
    queue: notifications
    email_queue: email_notifications
    sms_queue: sms_notifications
    sms_twilio_queue: sms_twilio_notifications
    sns_queue: sns_notifications
    jabber_queue: jabber_notifications
    pagerduty_queue: pagerduty_notifications
    notification_log_file: /var/log/flapjack/notification.log
    default_contact_timezone: UTC
    logger:
      level: INFO
      syslog_errors: yes
  nagios-receiver:
    fifo: "/var/cache/nagios3/event_stream.fifo"
    pid_dir: "/var/run/flapjack/"
    log_dir: "/var/log/flapjack/"
  nsca-receiver:
    fifo: "/var/lib/nagios3/rw/nagios.cmd"
    pid_dir: "/var/run/flapjack/"
    log_dir: "/var/log/flapjack/"
  gateways:
    # Generates email notifications
    email:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: email_notifications
      logger:
        level: INFO
        syslog_errors: yes
      # these values are passed directly through to EventMachine::Protocols::SmtpClient configuration,
      # and can be omitted if the defaults are acceptable
      smtp_config:
        # from: "Flapjack Example <flapjack@noreply.example>"
        # reply_to: "flapjack@support.example"
        host: 127.0.0.1
        # 1025 is the default port for http://mailcatcher.me
        port: 1025
        starttls: false
        #auth:
        #  type:
        #  username:
        #  password:
      # location of custom alert templates
      #templates:
      #  rollup_subject.text: '/etc/flapjack/templates/email/rollup_subject.text.erb'
      #  alert_subject.text: '/etc/flapjack/templates/email/alert_subject.text.erb'
      #  rollup.text: '/etc/flapjack/templates/email/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/email/alert.text.erb'
      #  rollup.html: '/etc/flapjack/templates/email/rollup.html.erb'
      #  alert.html: '/etc/flapjack/templates/email/alert.html.erb'
    # Sends SMS notifications via MessageNet (Australia only)
    sms:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: sms_notifications
      endpoint: 'https://www.messagenet.com.au/dotnet/Lodge.asmx/LodgeSMSMessage'
      username: "ermahgerd"
      password: "xxxx"
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/sms/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/sms/alert.text.erb'
    # Sends SMS notifications via Twilio
    sms_twilio:
      enabled: no
      queue: sms_twilio_notifications
      account_sid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
      auth_token: "yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy"
      from: "+1xxxxxxxxxx"
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/sms_twilio/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/sms_twilio/alert.text.erb'
    # Generates SNS notifications
    sns:
      enabled: no
      queue: sns_notifications
      #region_name: us-east-1
      # Don't forget to use an IAM user's credentials here so revocation is easy!
      access_key: AKIAIOSFODNN7EXAMPLE
      secret_key: wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
    # Connects to an XMPP (jabber) server, sends notifications (to rooms and individuals),
    # handles acknowledgements from jabber users and other commands.
    jabber:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: jabber_notifications
      server: "jabber.example.com"
      port: 5222
      jabberid: "flapjack@jabber.example.com"
      password: "good-password"
      alias: "flapjack"
      # List of strings that this pikelet user will respond to
      identifiers:
        - "@flapjack"
      # the Multi-User Chats the pikelet should join and announce to
      rooms:
        - "gimp@conference.jabber.example.com"
        - "log@conference.jabber.example.com"
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/jabber/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/jabber/alert.text.erb'
    # Sends notifications to and accepts acknowledgements from [PagerDuty](http://www.pagerduty.com/)
    # (NB: contacts will need to have a registered PagerDuty account to use this)
    pagerduty:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: pagerduty_notifications
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  alert.text: '/etc/flapjack/templates/pagerduty/alert.text.erb'
    # Browsable web interface
    web:
      enabled: yes
      port: 3080
      timeout: 300
      # Seconds between auto_refresh of entities/checks pages.  Set to 0 to disable
      auto_refresh: 120
      access_log: "/var/log/flapjack/web_access.log"
      api_url: "http://localhost:3081/"
      # Full path to location of logo file, e.g. /etc/flapjack/custom_logo.png
      #logo_image_path: "/etc/flapjack/web/custom_logo/flapjack-2013-notext-transparent-300-300.png"
      logger:
        level: INFO
        syslog_errors: yes
    # HTTP API server
    jsonapi:
      enabled: yes
      port: 3081
      timeout: 300
      access_log: "/var/log/flapjack/jsonapi_access.log"
      base_url: "http://localhost:3081/"
      logger:
        level: INFO
        syslog_errors: yes
    # "out-of-band" end-to-end testing, used for monitoring other instances of
    # flapjack to ensure that they are running correctly
    oobetet:
      enabled: no
      server: "jabber.example.com"
      port: 5222
      # jabberid, password, alias, rooms: see the jabber pikelet
      jabberid: "flapjacktest@jabber.example.com"
      password: "nuther-good-password"
      alias: "flapjacktest"
      # The check oobetet should watch for the state change
      watched_check: "PING"
      # The entitiy that the check should be associated with
      watched_entity: "foo.example.com"
      # The maximum amount of time allowed to pass between state changes on that check
      max_latency: 300
      # The API key for a service in PagerDuty that the oobetet will use to alert you
      pagerduty_contact: "11111111111111111111111111111111"
      # Jabber rooms to join
      rooms:
        - "flapjacktest@conference.jabber.example.com"
        - "gimp@conference.jabber.example.com"
        - "log@conference.jabber.example.com"
      logger:
        level: INFO
        syslog_errors: yes

development:
  pid_dir: tmp/pids/
  log_dir: log/
  daemonize: yes
  logger:
    level: DEBUG
    syslog_errors: yes
  redis:
    host: 127.0.0.1
    port: 6379
    db: 13
  # Processes monitoring events off the *events* queue (a redis list) and decides
  # what actions to take (generate notification event, record state changes, etc)
  processor:
    enabled: yes
    queue: events
    notifier_queue: notifications
    archive_events: true
    events_archive_maxage: 10800
    # Flapjack sets scheduled maintenance on new check results so contacts aren't
    # notified as soon as Flapjack becomes aware of an entity to notify on.
    # This is useful is cases where your monitoring starts checking something
    # before it is completely provisioned
    # Value parsed by https://github.com/hpoydar/chronic_duration
    # You can disable this setting by specifying "0 seconds".
    new_check_scheduled_maintenance_duration: 100 years
    new_check_scheduled_maintenance_ignore_tags:
      - bypass_ncsm
    logger:
      level: DEBUG
      syslog_errors: yes
  # Processes notification events off the *notifications* queue (a redis list) and
  # works out who to notify, and on which media, and with what kind of notification
  # message. It then creates jobs for the various notification gateways below.
  notifier:
    enabled: yes
    queue: notifications
    email_queue: email_notifications
    sms_queue: sms_notifications
    sms_twilio_queue: sms_twilio_notifications
    jabber_queue: jabber_notifications
    pagerduty_queue: pagerduty_notifications
    notification_log_file: log/notification.log
    default_contact_timezone: UTC
    logger:
      level: DEBUG
      syslog_errors: yes
  nagios-receiver:
    fifo: "/var/cache/nagios3/event_stream.fifo"
    pid_dir: "tmp/pids/"
    log_dir: "log/"
  nsca-receiver:
    fifo: "/var/lib/nagios3/rw/nagios.cmd"
    pid_dir: "tmp/pids/"
    log_dir: "log/"
  gateways:
    # Generates email notifications
    email:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: email_notifications
      logger:
        level: DEBUG
        syslog_errors: yes
      # these values are passed directly through to EventMachine::Protocols::SmtpClient configuration,
      # and can be omitted if the defaults are acceptable
      smtp_config:
        # from: "Flapjack Example <flapjack@noreply.example>"
        # reply_to: "flapjack@support.example"
        host: 127.0.0.1
        # 1025 is the default port for http://mailcatcher.me
        port: 1025
        starttls: false
        #auth:
        #  type:
        #  username:
        #  password:
      # location of custom alert templates
      #templates:
      #  rollup_subject.text: '/etc/flapjack/templates/email/rollup_subject.text.erb'
      #  alert_subject.text: '/etc/flapjack/templates/email/alert_subject.text.erb'
      #  rollup.text: '/etc/flapjack/templates/email/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/email/alert.text.erb'
      #  rollup.html: '/etc/flapjack/templates/email/rollup.html.erb'
      #  alert.html: '/etc/flapjack/templates/email/alert.html.erb'
    # Generates sms notifications
    sms:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: sms_notifications
      endpoint: 'https://www.messagenet.com.au/dotnet/Lodge.asmx/LodgeSMSMessage'
      username: "ermahgerd"
      password: "xxxx"
      logger:
        level: DEBUG
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/sms/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/sms/alert.text.erb'
    # Sends SMS messages via Twilio
    sms_twilio:
      enabled: no
      queue: sms_twilio_notifications
      account_sid: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
      auth_token: "yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy"
      from: "+1xxxxxxxxxx"
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/sms_twilio/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/sms_twilio/alert.text.erb'
    # Generates SNS notifications
    # Connects to an XMPP (jabber) server, sends notifications (to rooms and individuals),
    # handles acknowledgements from jabber users and other commands.
    jabber:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: jabber_notifications
      server: "jabber.example.com"
      port: 5222
      jabberid: "flapjack@jabber.example.com"
      password: "good-password"
      alias: "flapjack"
      # List of strings that this pikelet user will respond to
      identifiers:
        - "@flapjack"
      # the Multi-User Chats the pikelet should join and announce to
      rooms:
        - "gimp@conference.jabber.example.com"
        - "log@conference.jabber.example.com"
      logger:
        level: DEBUG
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  rollup.text: '/etc/flapjack/templates/jabber/rollup.text.erb'
      #  alert.text: '/etc/flapjack/templates/jabber/alert.text.erb'
    # Sends notifications to and accepts acknowledgements from [PagerDuty](http://www.pagerduty.com/)
    # (NB: contacts will need to have a registered PagerDuty account to use this)
    pagerduty:
      enabled: no
      # the redis queue this pikelet will look for notifications on
      queue: pagerduty_notifications
      logger:
        level: INFO
        syslog_errors: yes
      # location of custom alert templates
      #templates:
      #  alert.text: '/etc/flapjack/templates/pagerduty/alert.text.erb'
    # Browsable web interface
    web:
      enabled: yes
      port: 3080
      timeout: 300
      # Seconds between auto_refresh of entities/checks pages.  Set to 0 to disable
      auto_refresh: 120
      access_log: "log/web_access.log"
      api_url: "http://localhost:3081/"
      # Full path to location of logo file, e.g. /etc/flapjack/custom_logo.png
      #logo_image_path: "/etc/flapjack/web/custom_logo/flapjack-2013-notext-transparent-300-300.png"
      logger:
        level: DEBUG
        syslog_errors: yes
    # HTTP API server
    jsonapi:
      enabled: yes
      port: 3081
      timeout: 300
      access_log: "log/jsonapi_access.log"
      base_url: "http://localhost:3081/"
      logger:
        level: DEBUG
        syslog_errors: yes
    # "out-of-band" end-to-end testing, used for monitoring other instances of
    # flapjack to ensure that they are running correctly
    oobetet:
      enabled: no
      server: "jabber.example.com"
      port: 5222
      # jabberid, password, alias, rooms: see the jabber pikelet
      jabberid: "flapjacktest@jabber.example.com"
      password: "nuther-good-password"
      alias: "flapjacktest"
      # The check oobetet should watch for the state change
      watched_check: "PING"
      # The entitiy that the check should be associated with
      watched_entity: "foo.example.com"
      # The maximum amount of time allowed to pass between state changes on that check
      max_latency: 300
      # The API key for a service in PagerDuty that the oobetet will use to alert you
      pagerduty_contact: "11111111111111111111111111111111"
      # Jabber rooms to join
      rooms:
        - "flapjacktest@conference.jabber.example.com"
        - "gimp@conference.jabber.example.com"
        - "log@conference.jabber.example.com"
      logger:
        level: DEBUG
        syslog_errors: yes

test:
  pid_dir: tmp/pids/
  log_dir: log/
  redis:
    db: 14
    driver: ruby