Title: BinData Reference Manual

{:ruby: lang=ruby html_use_syntax=true}

# BinData

A declarative way to read and write structured binary data.

## What is it for?

Do you ever find yourself writing code like this?

    io = File.open(...)
    len = io.read(2).unpack("v")[0]
    name = io.read(len)
    width, height = io.read(8).unpack("VV")
    puts "Rectangle #{name} is #{width} x #{height}"
{:ruby}

It's ugly, violates DRY and feels like you're writing Perl, not Ruby.

There is a better way.

    class Rectangle < BinData::Record
      endian :little
      uint16 :len
      string :name, :read_length => :len
      uint32 :width
      uint32 :height
    end

    io = File.open(...)
    r = Rectangle.read(io)
    puts "Rectangle #{r.name} is #{r.width} x #{r.height}"
{:ruby}

BinData makes it easy to specify the structure of the data you are
manipulating.

Read on for the tutorial, or go straight to the
[download](http://rubyforge.org/frs/?group_id=3252) page.

## License

BinData is released under the same license as Ruby.

Copyright &copy; 2007 - 2010 [Dion Mendel](mailto:dion@lostrealm.com)

---------------------------------------------------------------------------

# Installation

You can install BinData via rubygems.

    gem install bindata

Alternatively, visit the 
[download](http://rubyforge.org/frs/?group_id=3252) page and download
BinData as a tar file.

---------------------------------------------------------------------------

# Overview

BinData declarations are easy to read.  Here's an example.

    class MyFancyFormat < BinData::Record
      stringz :comment
      uint8   :num_ints, :check_value => lambda { value.even? }
      array   :some_ints, :type => :int32be, :initial_length => :num_ints
    end
{:ruby}

This fancy format describes the following collection of data:

1.  A zero terminated string
2.  An unsigned 8bit integer which must by even
3.  A sequence of unsigned 32bit integers in big endian form, the total
    number of which is determined by the value of the 8bit integer.

The BinData declaration matches the English description closely.
Compare the above declaration with the equivalent `#unpack` code to read
such a data record.

    def read_fancy_format(io)
      comment, num_ints, rest = io.read.unpack("Z*Ca*")
      raise ArgumentError, "ints must be even" unless num_ints.even?
      some_ints = rest.unpack("N#{num_ints}")
      {:comment => comment, :num_ints => num_ints, :some_ints => *some_ints}
    end
{:ruby}

The BinData declaration clearly shows the structure of the record.  The
`#unpack` code makes this structure opaque.

The general usage of BinData is to declare a structured collection of
data as a user defined record.  This record can be instantiated, read,
written and manipulated without the user having to be concerned with the
underlying binary representation of the data.

---------------------------------------------------------------------------

# Common Operations

There are operations common to all BinData types, including user defined
ones.  These are summarised here.

## Reading and writing

`::read(io)`

:   Creates a BinData object and reads its value from the given string
    or `IO`.  The newly created object is returned.

        str = BinData::Stringz::read("string1\0string2")
        str.snapshot #=> "string1"
    {:ruby}

`#read(io)`

:   Reads and assigns binary data read from `io`.

        obj = BinData::Uint16be.new
        obj.read("\022\064")
        obj.value #=> 4660
    {:ruby}

`#write(io)`

:   Writes the binary representation of the object to `io`.

        File.open("...", "wb") do |io|
          obj = BinData::Uint64be.new
          obj.value = 568290145640170
          obj.write(io)
        end
    {:ruby}

`#to_binary_s`

:   Returns the binary representation of this object as a string.

        obj = BinData::Uint16be.new
        obj.assign(4660)
        obj.to_binary_s #=> "\022\064"
    {:ruby}

## Manipulating

`#assign(value)`

:   Assigns the given value to this object.  `value` can be of the same
    format as produced by `#snapshot`, or it can be a compatible data
    object.
  
        arr = BinData::Array.new(:type => :uint8)
        arr.assign([1, 2, 3, 4])
        arr.snapshot #=> [1, 2, 3, 4]
    {:ruby}

`#clear`

:   Resets this object to its initial state.

        obj = BinData::Int32be.new(:initial_value => 42)
        obj.assign(50)
        obj.clear
        obj.value #=> 42
    {:ruby}

`#clear?`

:   Returns whether this object is in its initial state.

        arr = BinData::Array.new(:type => :uint16be, :initial_length => 5)
        arr[3] = 42
        arr.clear? #=> false

        arr[3].clear
        arr.clear? #=> true
    {:ruby}

## Inspecting

`#num_bytes`

:   Returns the number of bytes required for the binary representation
    of this object.

        arr = BinData::Array.new(:type => :uint16be, :initial_length => 5)
        arr[0].num_bytes #=> 2
        arr.num_bytes #=> 10
    {:ruby}

`#snapshot`

:   Returns the value of this object as primitive Ruby objects
    (numerics, strings, arrays and hashs).  The output of `#snapshot`
    may be useful for serialization or as a reduced memory usage
    representation.

        obj = BinData::Uint8.new
        obj.assign(3)
        obj + 3 #=> 6

        obj.snapshot #=> 3
        obj.snapshot.class #=> Fixnum
    {:ruby}

`#offset`

:   Returns the offset of this object with respect to the most distant
    ancestor structure it is contained within.  This is most likely to
    be used with arrays and records.

        class Tuple < BinData::Record
          int8 :a
          int8 :b
        end

        arr = BinData::Array.new(:type => :tuple, :initial_length => 3)
        arr[2].b.offset #=> 5
    {:ruby}

`#rel_offset`

:   Returns the offset of this object with respect to the parent
    structure it is contained within.  Compare this to `#offset`.

        class Tuple < BinData::Record
          int8 :a
          int8 :b
        end

        arr = BinData::Array.new(:type => :tuple, :initial_length => 3)
        arr[2].b.rel_offset #=> 1
    {:ruby}

`#inspect`

:   Returns a human readable representation of this object.  This is a
    shortcut to #snapshot.inspect.

---------------------------------------------------------------------------

# Records

The general format of a BinData record declaration is a class containing
one or more fields.

    class MyName < BinData::Record
      type field_name, :param1 => "foo", :param2 => bar, ...
      ...
    end
{:ruby}

`type`
:   is the name of a supplied type (e.g. `uint32be`, `string`, `array`)
    or a user defined type.  For user defined types, the class name is
    converted from `CamelCase` to lowercased `underscore_style`.

`field_name`
:   is the name by which you can access the field.  Use either a
    `String` or a `Symbol`.  If name is nil or the empty string, then
    this particular field is anonymous.  An anonymous field is still
    read and written, but will not appear in `#snapshot`.

Each field may have optional *parameters* for how to process the data.
The parameters are passed as a `Hash` with `Symbols` for keys.
Parameters are designed to be lazily evaluated, possibly multiple times.
This means that any parameter value must not have side effects.

Here are some examples of legal values for parameters.

*   `:param => 5`
*   `:param => lambda { 5 + 2 }`
*   `:param => lambda { foo + 2 }`
*   `:param => :foo`

The simplest case is when the value is a literal value, such as `5`.

If the value is not a literal, it is expected to be a lambda.  The
lambda will be evaluated in the context of the parent, in this case the
parent is an instance of `MyName`.

If the value is a symbol, it is taken as syntactic sugar for a lambda
containing the value of the symbol.
e.g `:param => :foo` is `:param => lambda { foo }`

## Specifying default endian

The endianess of numeric types must be explicitly defined so that the
code produced is independent of architecture.  However, explicitly
specifying the endian for each numeric field can result in a bloated
declaration that can be difficult to read.

    class A < BinData::Record
      int16be  :a
      int32be  :b
      int16le  :c  # <-- Note little endian!
      int32be  :d
      float_be :e
      array    :f, :type => :uint32be
    end
{:ruby}

The `endian` keyword can be used to set the default endian.  This makes
the declaration easier to read.  Any numeric field that doesn't use the
default endian can explicitly override it.

    class A < BinData::Record
      endian :big

      int16   :a
      int32   :b
      int16le :c   # <-- Note how this little endian now stands out
      int32   :d
      float   :e
      array   :f, :type => :uint32
    end
{:ruby}

The increase in clarity can be seen with the above example.  The
`endian` keyword will cascade to nested types, as illustrated with the
array in the above example.

## Optional fields

A record may contain optional fields.  The optional state of a field is
decided by the `:onlyif` parameter.  If the value of this parameter is
`false`, then the field will be as if it didn't exist in the record.

    class RecordWithOptionalField < BinData::Record
      ...
      uint8  :comment_flag
      string :comment, :length => 20, :onlyif => :has_comment?

      def has_comment?
        comment_flag.nonzero?
      end
    end
{:ruby}

In the above example, the `comment` field is only included in the record
if the value of the `comment_flag` field is non zero.

## Handling dependencies between fields

A common occurence in binary file formats is one field depending upon
the value of another.  e.g. A string preceded by its length.

As an example, let's assume a Pascal style string where the byte
preceding the string contains the string's length.

    # reading
    io = File.open(...)
    len = io.getc
    str = io.read(len)
    puts "string is " + str

    # writing
    io = File.open(...)
    str = "this is a string"
    io.putc(str.length)
    io.write(str)
{:ruby}

Here's how we'd implement the same example with BinData.

    class PascalString < BinData::Record
      uint8  :len,  :value => lambda { data.length }
      string :data, :read_length => :len
    end

    # reading
    io = File.open(...)
    ps = PascalString.new
    ps.read(io)
    puts "string is " + ps.data

    # writing
    io = File.open(...)
    ps = PascalString.new
    ps.data = "this is a string"
    ps.write(io)
{:ruby}

This syntax needs explaining.  Let's simplify by examining reading and
writing separately.

    class PascalStringReader < BinData::Record
      uint8  :len
      string :data, :read_length => :len
    end
{:ruby}

This states that when reading the string, the initial length of the
string (and hence the number of bytes to read) is determined by the
value of the `len` field.

Note that `:read_length => :len` is syntactic sugar for
`:read_length => lambda { len }`, as described previously.

    class PascalStringWriter < BinData::Record
      uint8  :len, :value => lambda { data.length }
      string :data
    end
{:ruby}

This states that the value of `len` is always equal to the length of
`data`.  `len` may not be manually modified.

Combining these two definitions gives the definition for `PascalString`
as previously defined.

It is important to note with dependencies, that a field can only depend
on one before it.  You can't have a string which has the characters
first and the length afterwards.

---------------------------------------------------------------------------

# Primitive Types

BinData provides support for the most commonly used primitive types that
are used when working with binary data.  Namely:

*   fixed size strings
*   zero terminated strings
*   byte based integers - signed or unsigned, big or little endian and
    of any size
*   bit based integers - unsigned big or little endian integers of any
    size
*   floating point numbers - single or double precision floats in either
    big or little endian

Primitives may be manipulated individually, but is more common to work
with them as part of a record.

Examples of individual usage:

    int16 = BinData::Int16be.new
    int16.value = 941
    int16.to_binary_s #=> "\003\255"

    fl = BinData::FloatBe.read("\100\055\370\124") #=> 2.71828174591064
    fl.num_bytes #=> 4

    fl * int16 #=> 2557.90320057996
{:ruby}

There are several parameters that are specific to primitives.

`:initial_value`

:   This contains the initial value that the primitive will contain
    after initialization.  This is useful for setting default values.

        obj = BinData::String.new(:initial_value => "hello ")
        obj + "world" #=> "hello world"

        obj.assign("good-bye " )
        obj + "world" #=> "good-bye world"
    {:ruby}

`:value`

:   The primitive will always contain this value.  Reading or assigning
    will not change the value.  This parameter is used to define
    constants or dependent fields.

        pi = BinData::FloatLe.new(:value => Math::PI)
        pi.assign(3)
        puts pi #=> 3.14159265358979
    {:ruby}

`:check_value`

:   When reading, will raise a `ValidityError` if the value read does
    not match the value of this parameter.

        obj = BinData::String.new(:check_value => lambda { /aaa/ =~ value })
        obj.read("baaa!") #=> "baaa!"
        obj.read("bbb") #=> raises ValidityError

        obj = BinData::String.new(:check_value => "foo")
        obj.read("foo") #=> "foo"
        obj.read("bar") #=> raises ValidityError
    {:ruby}

## Numerics

There are three kinds of numeric types that are supported by BinData.

### Byte based integers

These are the common integers that are used in most low level
programming languages (C, C++, Java etc).  These integers can be signed
or unsigned.  The endian must be specified so that the conversion is
independent of architecture.  The bit size of these integers must be a
multiple of 8.  Examples of byte based integers are:

`uint16be`
:   unsigned 16 bit big endian integer

`int8`
:   signed 8 bit integer

`int32le`
:   signed 32 bit little endian integer

`uint40be`
:   unsigned 40 bit big endian integer

The `be` | `le` suffix may be omitted if the `endian` keyword is in use.

### Bit based integers

These unsigned integers are used to define bitfields in records.
Bitfields are big endian by default but little endian may be specified
explicitly.  Little endian bitfields are rare, but do occur in older
file formats (e.g.  The file allocation table for FAT12 filesystems is
stored as an array of 12bit little endian integers).

An array of bit based integers will be packed according to their endian.

In a record, adjacent bitfields will be packed according to their
endian.  All other fields are byte aligned.

Examples of bit based integers are:

`bit1`
:   1 bit big endian integer (may be used as boolean)

`bit4_le`
:   4 bit little endian integer

`bit32`
:   32 bit big endian integer

The difference between byte and bit base integers of the same number of
bits (e.g. `uint8` vs `bit8`) is one of alignment.

This example is packed as 3 bytes

    class A < BinData::Record
      bit4  :a
      uint8 :b
      bit4  :c
    end

    Data is stored as: AAAA0000 BBBBBBBB CCCC0000
{:ruby}

Whereas this example is packed into only 2 bytes

    class B < BinData::Record
      bit4 :a
      bit8 :b
      bit4 :c
    end

    Data is stored as: AAAABBBB BBBBCCCC
{:ruby}

### Floating point numbers

BinData supports 32 and 64 bit floating point numbers, in both big and
little endian format.  These types are:

`float_le`
:   single precision 32 bit little endian float

`float_be`
:   single precision 32 bit big endian float

`double_le`
:   double precision 64 bit little endian float

`double_be`
:   double precision 64 bit big endian float

The `_be` | `_le` suffix may be omitted if the `endian` keyword is in use.

### Example

Here is an example declaration for an Internet Protocol network packet.

    class IP_PDU < BinData::Record
      endian :big

      bit4   :version, :value => 4
      bit4   :header_length
      uint8  :tos
      uint16 :total_length
      uint16 :ident
      bit3   :flags
      bit13  :frag_offset
      uint8  :ttl
      uint8  :protocol
      uint16 :checksum
      uint32 :src_addr
      uint32 :dest_addr
      string :options, :read_length => :options_length_in_bytes
      string :data, :read_length => lambda { total_length - header_length_in_bytes }

      def header_length_in_bytes
        header_length * 4
      end

      def options_length_in_bytes
        header_length_in_bytes - 20
      end
    end
{:ruby}

Three of the fields have parameters.
*   The version field always has the value 4, as per the standard.
*   The options field is read as a raw string, but not processed.
*   The data field contains the payload of the packet.  Its length is
    calculated as the total length of the packet minus the length of
    the header.

## Strings

BinData supports two types of strings - fixed size and zero terminated.
Strings are treated as a sequence of 8bit bytes.  This is the same as
strings in Ruby 1.8.  The issue of character encoding is ignored by
BinData.

### Fixed Sized Strings

Fixed sized strings may have a set length.  If an assigned value is
shorter than this length, it will be padded to this length.  If no
length is set, the length is taken to be the length of the assigned
value.

There are several parameters that are specific to fixed sized strings.

`:read_length`

:   The length to use when reading a value.

        obj = BinData::String.new(:read_length => 5)
        obj.read("abcdefghij")
        obj.value #=> "abcde"
    {:ruby}

`:length`

:   The fixed length of the string.  If a shorter string is set, it
    will be padded to this length.  Longer strings will be truncated.

        obj = BinData::String.new(:length => 6)
        obj.read("abcdefghij")
        obj.value #=> "abcdef"

        obj = BinData::String.new(:length => 6)
        obj.value = "abcd"
        obj.value #=> "abcd\000\000"

        obj = BinData::String.new(:length => 6)
        obj.value = "abcdefghij"
        obj.value #=> "abcdef"
    {:ruby}

`:pad_char`

:   The character to use when padding a string to a set length.  Valid
    values are `Integers` and `Strings` of length 1.
    `"\0"` is the default.

        obj = BinData::String.new(:length => 6, :pad_char => 'A')
        obj.value = "abcd"
        obj.value #=> "abcdAA"
        obj.to_binary_s #=> "abcdAA"
    {:ruby}

`:trim_padding`

:   Boolean, default `false`.  If set, the value of this string will
    have all pad_chars trimmed from the end of the string.  The value
    will not be trimmed when writing.

        obj = BinData::String.new(:length => 6, :trim_value => true)
        obj.value = "abcd"
        obj.value #=> "abcd"
        obj.to_binary_s #=> "abcd\000\000"
    {:ruby}

### Zero Terminated Strings

These strings are modelled on the C style of string - a sequence of
bytes terminated by a null (`"\0"`) character.

    obj = BinData::Stringz.new
    obj.read("abcd\000efgh")
    obj.value #=> "abcd"
    obj.num_bytes #=> 5
    obj.to_binary_s #=> "abcd\000"
{:ruby}

## User Defined Primitive Types

Most user defined types will be Records, but occasionally we'd like to
create a custom type of primitive.

Let us revisit the Pascal String example.

    class PascalString < BinData::Record
      uint8  :len,  :value => lambda { data.length }
      string :data, :read_length => :len
    end
{:ruby}

We'd like to make `PascalString` a user defined type that behaves like a
`BinData::BasePrimitive` object so we can use `:initial_value` etc.
Here's an example usage of what we'd like:

    class Favourites < BinData::Record
      pascal_string :language, :initial_value => "ruby"
      pascal_string :os,       :initial_value => "unix"
    end

    f = Favourites.new
    f.os = "freebsd"
    f.to_binary_s #=> "\004ruby\007freebsd"
{:ruby}

We create this type of custom string by inheriting from
`BinData::Primitive` (instead of `BinData::Record`) and implementing the
`#get` and `#set` methods.

    class PascalString < BinData::Primitive
      uint8  :len,  :value => lambda { data.length }
      string :data, :read_length => :len

      def get;   self.data; end
      def set(v) self.data = v; end
    end
{:ruby}

### Advanced User Defined Primitive Types

Sometimes a user defined primitive type can not easily be declaratively
defined.  In this case you should inherit from `BinData::BasePrimitive`
and implement the following three methods:

*   `value_to_binary_string(value)`
*   `read_and_return_value(io)`
*   `sensible_default()`

Here is an example of a big integer implementation.

    # A custom big integer format.  Binary format is:
    #   1 byte  : 0 for positive, non zero for negative
    #   x bytes : Little endian stream of 7 bit bytes representing the
    #             positive form of the integer.  The upper bit of each byte
    #             is set when there are more bytes in the stream.
    class BigInteger < BinData::BasePrimitive
      register_self

      def value_to_binary_string(value)
        negative = (value < 0) ? 1 : 0
        value = value.abs
        bytes = [negative]
        loop do
          seven_bit_byte = value & 0x7f
          value >>= 7
          has_more = value.nonzero? ? 0x80 : 0
          byte = has_more | seven_bit_byte
          bytes.push(byte)

          break if has_more.zero?
        end

        bytes.collect { |b| b.chr }.join
      end

      def read_and_return_value(io)
        negative = read_uint8(io).nonzero?
        value = 0
        bit_shift = 0
        loop do
          byte = read_uint8(io)
          has_more = byte & 0x80
          seven_bit_byte = byte & 0x7f
          value |= seven_bit_byte << bit_shift
          bit_shift += 7

          break if has_more.zero?
        end

        negative ? -value : value
      end

      def sensible_default
        0
      end

      def read_uint8(io)
        io.readbytes(1).unpack("C").at(0)
      end
    end
{:ruby}

---------------------------------------------------------------------------

# Arrays

A BinData array is a list of data objects of the same type.  It behaves
much the same as the standard Ruby array, supporting most of the common
methods.

When instantiating an array, the type of object it contains must be
specified.

    arr = BinData::Array.new(:type => :uint8)
    arr[3] = 5
    arr.snapshot #=> [0, 0, 0, 5]
{:ruby}

Parameters can be passed to this object with a slightly clumsy syntax.

    arr = BinData::Array.new(:type => [:uint8, {:initial_value => :index}])
    arr[3] = 5
    arr.snapshot #=> [0, 1, 2, 5]
{:ruby}

There are two different parameters that specify the length of the array.

`:initial_length`

:    Specifies the initial length of a newly instantiated array.
     The array may grow as elements are inserted.

        obj = BinData::Array.new(:type => :int8, :initial_length => 4)
        obj.read("\002\003\004\005\006\007")
        obj.snapshot #=> [2, 3, 4, 5]
    {:ruby}

`:read_until`

:   While reading, elements are read until this condition is true.  This
    is typically used to read an array until a sentinel value is found.
    The variables `index`, `element` and `array` are made available to
    any lambda assigned to this parameter.  If the value of this
    parameter is the symbol `:eof`, then the array will read as much
    data from the stream as possible.
  
        obj = BinData::Array.new(:type => :int8,
                                 :read_until => lambda { index == 1 })
        obj.read("\002\003\004\005\006\007")
        obj.snapshot #=> [2, 3]

        obj = BinData::Array.new(:type => :int8,
                                 :read_until => lambda { element >= 3.5 })
        obj.read("\002\003\004\005\006\007")
        obj.snapshot #=> [2, 3, 4]

        obj = BinData::Array.new(:type => :int8,
                :read_until => lambda { array[index] + array[index - 1] == 9 })
        obj.read("\002\003\004\005\006\007")
        obj.snapshot #=> [2, 3, 4, 5]

        obj = BinData::Array.new(:type => :int8, :read_until => :eof)
        obj.read("\002\003\004\005\006\007")
        obj.snapshot #=> [2, 3, 4, 5, 6, 7]
    {:ruby}

---------------------------------------------------------------------------

# Choices

A Choice is a collection of data objects of which only one is active at
any particular time.  Method calls will be delegated to the active
choice.  The possible types of objects that a choice contains is
controlled by the `:choices` parameter, while the `:selection` parameter
specifies the active choice.

`:choices`

:   Either an array or a hash specifying the possible data objects.  The
    format of the array/hash.values is a list of symbols representing
    the data object type.  If a choice is to have params passed to it,
    then it should be provided as `[type_symbol, hash_params]`.  An
    implementation constraint is that the hash may not contain symbols
    as keys.

`:selection`

:   An index/key into the `:choices` array/hash which specifies the
    currently active choice.

`:copy_on_change`

:   If set to `true`, copy the value of the previous selection to the
    current selection whenever the selection changes.  Default is
    `false`.

Examples

    type1 = [:string, {:value => "Type1"}]
    type2 = [:string, {:value => "Type2"}]
    
    choices = {5 => type1, 17 => type2}
    obj = BinData::Choice.new(:choices => choices, :selection => 5)
    obj.value # => "Type1"

    choices = [ type1, type2 ]
    obj = BinData::Choice.new(:choices => choices, :selection => 1)
    obj.value # => "Type2"

    choices = [ nil, nil, nil, type1, nil, type2 ]
    obj = BinData::Choice.new(:choices => choices, :selection => 3)
    obj.value # => "Type1"

    class MyNumber < BinData::Record
      int8 :is_big_endian
      choice :data, :choices => { true => :int32be, false => :int32le },
                    :selection => lambda { is_big_endian != 0 },
                    :copy_on_change => true
    end

    obj = MyNumber.new
    obj.is_big_endian = 1
    obj.data = 5
    obj.to_binary_s #=> "\001\000\000\000\005"

    obj.is_big_endian = 0
    obj.to_binary_s #=> "\000\005\000\000\000"
{:ruby}

---------------------------------------------------------------------------

# Advanced Topics

## Skipping over unused data

Some binary structures contain data that is irrelevant to your purposes.  

Say you are interested in 50 bytes of data located 10 megabytes into the
stream.  One way of accessing this useful data is:

    class MyData < BinData::Record
      string :length => 10 * 1024 * 1024
      string :data, :length => 50
    end
{:ruby}

The advantage of this method is that the irrelevant data is preserved
when writing the record.  The disadvantage is that even if you don't care
about preserving this irrelevant data, it still occupies memory.

If you don't need to preserve this data, an alternative is to use
`skip` instead of `string`.  When reading it will seek over the irrelevant
data and won't consume space in memory.  When writing it will write
`:length` number of zero bytes.

    class MyData < BinData::Record
      skip :length => 10 * 1024 * 1024
      string :data, :length => 50
    end
{:ruby}

## Wrappers

Sometimes you wish to create a new type that is simply an existing type
with some predefined parameters.  Examples could be an array with a
specified type, or an integer with an initial value.

This can be achieved with a wrapper.  A wrapper creates a new type based
on an existing type which has predefined parameters.  These parameters
can of course be overridden at initialisation time.

Here we define an array that contains big endian 16 bit integers.  The
array has a preferred initial length.

    class IntArray < BinData::Wrapper
      endian :big
      array :type => :uint16, :initial_length => 5
    end

    arr = IntArray.new
    arr.size #=> 5
{:ruby}

The initial length can be overridden at initialisation time.

    arr = IntArray.new(:initial_length => 8)
    arr.size #=> 8
{:ruby}

## Parameterizing User Defined Types

All BinData types have parameters that allow the behaviour of an object
to be specified at initialization time.  User defined types may also
specify parameters.  There are two types of parameters: mandatory and
default.

### Mandatory Parameters

Mandatory parameters must be specified when creating an instance of the
type.  The `:type` parameter of `Array` is an example of a mandatory
type.

    class IntArray < BinData::Wrapper
      mandatory_parameter :half_count

      array :type => :uint8, :initial_length => lambda { half_count * 2 }
    end

    arr = IntArray.new
        #=> raises ArgumentError: parameter 'half_count' must be specified in IntArray

    arr = IntArray.new(:half_count => lambda { 1 + 2 })
    arr.snapshot #=> [0, 0, 0, 0, 0, 0]
{:ruby}

### Default Parameters

Default parameters are optional.  These parameters have a default value
that may be overridden when an instance of the type is created.

    class Phrase < BinData::Primitive
      default_parameter :number => "three"
      default_parameter :adjective => "blind"
      default_parameter :noun => "mice"

      stringz :a, :initial_value => :number
      stringz :b, :initial_value => :adjective
      stringz :c, :initial_value => :noun

      def get; "#{a} #{b} #{c}"; end
      def set(v)
        if /(.*) (.*) (.*)/ =~ v
          self.a, self.b, self.c = $1, $2, $3
        end
      end
    end

    obj = Phrase.new(:number => "two", :adjective => "deaf")
    obj.to_s #=> "two deaf mice"
{:ruby}

## Debugging

BinData includes several features to make it easier to debug
declarations.

### Tracing

BinData has the ability to trace the results of reading a data
structure.

    class A < BinData::Record
      int8  :a
      bit4  :b
      bit2  :c
      array :d, :initial_length => 6, :type => :bit1
    end

    BinData::trace_reading do
      A.read("\373\225\220")
    end
{:ruby}

Results in the following being written to `STDERR`.

    obj.a => -5
    obj.b => 9
    obj.c => 1
    obj.d[0] => 0
    obj.d[1] => 1
    obj.d[2] => 1
    obj.d[3] => 0
    obj.d[4] => 0
    obj.d[5] => 1
{:ruby}

### Rest

The rest keyword will consume the input stream from the current position
to the end of the stream.

    class A < BinData::Record
      string :a, :read_length => 5
      rest   :rest
    end

    obj = A.read("abcdefghij")
    obj.a #=> "abcde"
    obj.rest #=" "fghij"
{:ruby}

### Hidden fields

The typical way to view the contents of a BinData record is to call
`#snapshot` or `#inspect`.  This gives all fields and their values.  The
`hide` keyword can be used to prevent certain fields from appearing in
this output.  This removes clutter and allows the developer to focus on
what they are currently interested in.

    class Testing < BinData::Record
      hide :a, :b
      string :a, :read_length => 10
      string :b, :read_length => 10
      string :c, :read_length => 10
    end

    obj = Testing.read(("a" * 10) + ("b" * 10) + ("c" * 10))
    obj.snapshot #=> {"c"=>"cccccccccc"}
    obj.to_binary_s #=> "aaaaaaaaaabbbbbbbbbbcccccccccc"
{:ruby}

---------------------------------------------------------------------------

# Alternatives

There are several alternatives to BinData.  Below is a comparison
between BinData and its alternatives.

The short form is that BinData is the best choice for most cases.  If
decoding / encoding speed is very important and the binary formats are
simple then BitStruct may be a good choice.  (Though if speed is
important, perhaps you should investigate a language other than Ruby.)

### [BitStruct](http://rubyforge.org/projects/bit-struct)

BitStruct is the most complete of all the alternatives.  It is
declarative and supports all the same primitive types as BinData.  In
addition it includes a self documenting feature to make it easy to write
reports.

The major limitation of BitStruct is that it does not support variable
length fields and dependent fields.  The simple PascalString example
used previously is not possible with BitStruct.  This limitation is due
to the design choice to favour speed over flexibility.

Most non trivial file formats rely on dependent and variable length
fields.  It is difficult to use BitStruct with these formats as code
must be written to explicitly handle the dependencies.

BitStruct does not currently support little endian bit fields, or
bitfields that span more than 2 bytes.  BitStruct is actively maintained
so these limitations may be removed in a future release.

If speed is important and you are only dealing with simple binary data
types then BitStruct is a good choice.  For non trivial data types,
BinData is the better choice.

### [BinaryParse](http://rubyforge.org/projects/binaryparse)

BinaryParse is a declarative style packer / unpacker.  It provides the
same primitives as Ruby's `#pack`, with the addition of date and time.
Like BitStruct, it doesn't provide dependent or variable length fields.

### [BinStruct](http://rubyforge.org/projects/metafuzz)

BinStruct is an imperative approach to unpacking binary data.  It does
provide some declarative style syntax sugar.  It provides support for
the most common primitive types, as well as arbitrary length bitfields.

Its main focus is as a binary fuzzer, rather than as a generic decoding
/ encoding library.

### [Packable](http://github.com/marcandre/packable/tree/master)

Packable makes it much nicer to use Ruby's `#pack` and `#unpack`
methods.  Instead of having to remember that, for example `"n"` is the
code to pack a 16 bit big endian integer, packable provides many
convenient shortcuts.  In the case of `"n"`, `{:bytes => 2, :endian => :big}`
may be used instead.

Using Packable improves the readability of `#pack` and `#unpack`
methods, but explicitly calls to `#pack` and `#unpack` aren't as
readable as a declarative approach.

### [Bitpack](http://rubyforge.org/projects/bitpack)

Bitpack provides methods to extract big endian integers of arbitrary bit
length from an octet stream.

The extraction code is written in `C`, so if speed is important and bit
manipulation is all the functionality you require then this may be an
alternative.

---------------------------------------------------------------------------