= Whois Whois is an intelligent pure Ruby WHOIS client and parser. It is a os-independent library and doesn't require external C libraries or GEMS: it is a 100% Ruby software with all the advantages and disadvantages that it involves. This software was developed to power RoboDomain[http://www.robodomain.com] and, since July 2009, it run more than thousands requests. An extensive test suite is available to verify the library correctness but you must be aware that registrant might change Whois interfaces without notice and at any time causing queries to specific hosts to stop working. == Features * Pure Ruby library without any external dependency other than Ruby itself * Intelligent Ruby client * Flexible and extensible configuration with support for user-defined servers * Powerful whois response parser * Support for ipv6, ipv4 and top level domain whois queries * Object oriented design * Compatible with older Whois version (Whois 0.4.2, see below) * Compatible with Ruby 1.8.6 and greater, including Ruby 1.9 == Requirements * Ruby >= 1.8.6 (not tested with previous versions) Whois has been {successfully tested}[http://code.simonecarletti.com/wiki/whois/Platforms] against the following Ruby platforms: * Ruby 1.8.6 / 1.8.7 / 1.9.1 * MacRuby 0.4 * Ruby Enterprise Edition Do you run any other Ruby platform or version? Are you experiencing any problem? Join our {discussion group}[http://groups.google.com/group/ruby-whois]. == Installation This library is intended to be installed via the RubyGems[http://rubyforge.org/projects/rubygems/] system. $ gem install whois You might need administrator privileges on your system to install it. == Getting Started Note. This section covers only the essentials for getting started with the Whois library. The {documentation}[http://code.simonecarletti.com/wiki/whois] provides a more accurate explanation including tutorials, more examples and technical details about the client/server/answer/parser architecture. === Querying the Server Whois provides the ability to get WHOIS information for hostnames, ipv4 and ipv6 ip addresses. The client is smart enough to guess the best WHOIS server according to given query, send the request and return the response. Checkout the following examples: # Domain Whois w = Whois::Client.new w.query("google.com") # => # # IPv4 Whois w = Whois::Client.new w.query("74.125.67.100") # => # # IPv6 Whois w = Whois::Client.new w.query("2001:db8::1428:57ab") # => # The query method is stateless. For this reason, you can safely re-use the same client instance for multiple queries. w = Whois::Client.new w.query("google.com") w.query("74.125.67.100") w.query("2001:db8::1428:57ab") w.query("google.it") If you just need a WHOIS response and you don't care about a full control of the WHOIS Client, Whois comes with a simple method called whois. This is the simplest way to send a WHOIS request. Whois.whois("google.com") # => # === Consuming the Answer As of release 0.8, a WHOIS query no longer returns a simple string. Instead, you get a full Whois::Answer instance and this is just the beginning of the story. Whois::Answer is a super powerful object. It encapsulates the full WHOIS answer and it provides you the ability to parse the WHOIS response with a full object oriented notation. a = Whois.whois("google.it") # => # a.available? # => false a.registered? # => true a.created_on # => Fri Dec 10 00:00:00 +0100 1999 t = a.techinical # => # t.id # => "TS7016-ITNIC" t.name # => "Technical Services" a.nameservers.each do |nameserver| puts nameserver end This feature is made possible by the Whois answer parsers. Unfortunately, due to the lack of a global standard, each WHOIS server requires a specific parser. For this reason, the library doesn't support all existing WHOIS servers. If you create a new parser, please consider releasing it to the public so that it can be included in a next version. === Timeout By default, each query run though the client has a timeout value of 5 seconds. If the execution exceeds timeout limit, the client raises a Timeout::Error exception. Off course, you can customize the timeout value setting a different value. If timeout is nil, the client will until the response is sent back from the server or the process is killed. Don't disable the timeout unless you really know you are doing! w = Whois::Client.new(:timeout => 10) w.timeout # => 10 w.timeout = 5 w.timeout # => 5 w.query("google.com") == Acknowledgments First of all, I would like to express my most sincere thanks to Cyril Mougel, the author of the first Ruby Whois GEM that has been available since 2007. Cyril has been kind enough to yield me the privilege of using the RubyForge Whois project and the Whois package name to publish this library. To express all my gratitude, the Release 0.5.0 of the new Ruby Whois is 100% compatible with Cyril's Whois (as of release 0.4.2). Whois is largely inspired by other notable Whois projects, most of all the Debian Whois library written and mainained by Marco D'Itri. Other good ideas and design decisions come from the PERL Net::DRI package. I would lie if I say I'm completely unaware of the other Ruby Whois projects. Before starting this Ruby Whois library I deeply investigated the available resources and, despite none of them was a good candidate for a refactoring, some of them expose a really cool API. They didn't directly influence this library or any design decision, but they have been a really interesting code-reading. The parser architecture (yet to come) has been inspired by the PHPWhois[http://phpwhois.sourceforge.net/] project. The authors puts lot of effort to create whois-specific parsers normalizing the different responses in a single tree-based structure. So far, this is the only one opensource project that offers such this feature in all the programming language ecosystem. Despite I spent weeks reading source code from the available whois libraries, Ruby Whois has been built from scratch trying to focus on long-term maintainability and flexibility and cannot be considered a Ruby port of any of other existing Whois libraries. == Notice for users of Whois 0.4 (or previous version) As of release 0.5.0, the Whois GEM has been completely rewritten. As I explained in the Acknowledgment section, Cyril Mougel (the author of the original Whois package) yield me the privilege to use the Whois RubyForge project for my new Whois client. My Whois client provides all the features offered by Cyril's library, with some nice additions like the ability to get top level domain query information. All existing users won't be affected by this change since the new Whois library comes with a compatibility adapter that translates all the requests from the deprecated interface to the new one. The adapter will be removed in a future version so make sure to check your application for deprecation warnings and fix them before upgrading to a newest release that doesn't belong to the 0.5.x series. Ruby Whois 0.4.2 is released under the MIT license. Copyright (c) 2007 by Cyril Mougel (cyril.mougel@gmail.com) == Credits Author:: {Simone Carletti}[http://www.simonecarletti.com/] Author (Whois 0.4):: {Cyril Mougel}[http://blog.shingara.fr/] == FeedBack and Bug reports If you use this library and find yourself missing any functionality I have missed, please {let me know}[mailto:weppos@weppos.net]. Bug reports and Feature suggestions {are welcomed}[http://code.simonecarletti.com/projects/whois/issues]. == Resources * {Homepage}[http://code.simonecarletti.com/whois] * {GitHub}[http://github.com/weppos/whois] * {RubyForge}[http://rubyforge.org/projects/whois/] * {API}[http://whois.rubyforge.org/] * {Discussion Group}[http://groups.google.com/group/ruby-whois] == Changelog See the CHANGELOG.rdoc file for details. == License Copyright (c) 2009 Simone Carletti, Whois is released under the MIT license.