# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'json' module TencentCloud module Ess module V20201111 class Client < TencentCloud::Common::AbstractClient def initialize(credential, region, profile = nil) api_version = '2020-11-11' api_endpoint = 'ess.tencentcloudapi.com' sdk_version = 'ESS_' + File.read(File.expand_path('../VERSION', __dir__)).strip super(credential, region, api_version, api_endpoint, sdk_version, profile) end # 此接口（BindEmployeeUserIdWithClientOpenId）用于将电子签系统员工UserId与客户系统员工OpenId进行绑定。 # @param request: Request instance for BindEmployeeUserIdWithClientOpenId. # @type request: :class:`Tencentcloud::ess::V20201111::BindEmployeeUserIdWithClientOpenIdRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::BindEmployeeUserIdWithClientOpenIdResponse` def BindEmployeeUserIdWithClientOpenId(request) body = send_request('BindEmployeeUserIdWithClientOpenId', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = BindEmployeeUserIdWithClientOpenIdResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 用于撤销签署流程
# 适用场景：如果某个合同流程当前至少还有一方没有签署，则可通过该接口取消该合同流程。常用于合同发错、内容填错，需要及时撤销的场景。
# `注意：如果合同流程中的参与方均已签署完毕，则无法通过该接口撤销合同。` # @param request: Request instance for CancelFlow. # @type request: :class:`Tencentcloud::ess::V20201111::CancelFlowRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CancelFlowResponse` def CancelFlow(request) body = send_request('CancelFlow', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CancelFlowResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CancelMultiFlowSignQRCode）用于废除一码多扫流程签署二维码。 # 该接口所需的二维码ID，源自[创建一码多扫流程签署二维码](https://qian.tencent.com/developers/companyApis/startFlows/CreateMultiFlowSignQRCode)生成的。 # 如果该二维码尚处于有效期内，可通过本接口将其设置为失效状态。 # @param request: Request instance for CancelMultiFlowSignQRCode. # @type request: :class:`Tencentcloud::ess::V20201111::CancelMultiFlowSignQRCodeRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CancelMultiFlowSignQRCodeResponse` def CancelMultiFlowSignQRCode(request) body = send_request('CancelMultiFlowSignQRCode', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CancelMultiFlowSignQRCodeResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 用来撤销获取个人用户自动签的开通状态生成的开通链接，撤销生成的链接失效。 # 注: # # @param request: Request instance for CancelUserAutoSignEnableUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CancelUserAutoSignEnableUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CancelUserAutoSignEnableUrlResponse` def CancelUserAutoSignEnableUrl(request) body = send_request('CancelUserAutoSignEnableUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CancelUserAutoSignEnableUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 注：此接口将会废弃，请使用撤销单个签署流程（CancelFlow）接口。 # 指定需要批量撤回的签署流程Id，获取批量撤销链接。 # 客户指定需要撤回的签署流程Id，最多100个，超过100不处理；接口调用成功返回批量撤回合同的链接，通过链接跳转到电子签小程序完成批量撤回。 # @param request: Request instance for CreateBatchCancelFlowUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateBatchCancelFlowUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateBatchCancelFlowUrlResponse` def CreateBatchCancelFlowUrl(request) body = send_request('CreateBatchCancelFlowUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateBatchCancelFlowUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 通过此接口，创建小程序批量签署链接，个人/企业员工点击此链接即可跳转小程序进行批量签署。 # 请确保生成链接时候的身份信息和签署合同参与方的信息保持一致。 # 注： # - 参与人点击链接后需短信验证码才能查看合同内容。 # - 企业用户批量签署，需要传OrganizationName（参与方所在企业名称）参数生成签署链接，`请确保此企业已完成腾讯电子签企业认证`。 # - 个人批量签署，签名区`仅支持手写签名`。 # @param request: Request instance for CreateBatchSignUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateBatchSignUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateBatchSignUrlResponse` def CreateBatchSignUrl(request) body = send_request('CreateBatchSignUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateBatchSignUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateConvertTaskApi）用来将word、excel、图片、txt类型文件转换为PDF文件。
# 前提条件：源文件已经通过 文件上传接口完成上传，并得到了源文件的资源Id。
# 适用场景1：已经上传了一个word文件，希望将该word文件转换成pdf文件后发起合同 # 适用场景2：已经上传了一个jpg图片文件，希望将该图片文件转换成pdf文件后发起合同
# 转换文件是一个耗时操作，若想查看转换任务是否完成，可以通过查询转换任务状态接口获取任务状态。
# 注: # 1. `支持的文件类型有doc、docx、xls、xlsx、jpg、jpeg、png、bmp、txt` # 2. `可通过发起合同时设置预览来检查转换文件是否达到预期效果` # @param request: Request instance for CreateConvertTaskApi. # @type request: :class:`Tencentcloud::ess::V20201111::CreateConvertTaskApiRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateConvertTaskApiResponse` def CreateConvertTaskApi(request) body = send_request('CreateConvertTaskApi', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateConvertTaskApiResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 创建签署流程电子文档
# 适用场景：见创建签署流程接口。
# 点击查看通过模板创建签署流程 # 用PDF文件创建签署流程。
# 注：该接口需要给对应的流程指定一个模板id，并且填充该模板中需要补充的信息。需要配置创建签署流程和发起签署流程接口使用。具体逻辑可以参考下图: # CreateFlow创建签署流程CreateDocument创建电子文档StartFlow发起签署流程开始签署(小程序/H5等)控制台创建模板API # @param request: Request instance for CreateDocument. # @type request: :class:`Tencentcloud::ess::V20201111::CreateDocumentRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateDocumentResponse` def CreateDocument(request) body = send_request('CreateDocument', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateDocumentResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（CreateEmbedWebUrl）用于创建嵌入Web的链接，支持以下类型的Web链接创建： # 1. 创建印章 # 2. 创建模板 # 3. 修改模板 # 4. 预览模板 # 5. 预览合同流程 # 用户可以通过这些链接快速将其集成到自己的系统中。 # @param request: Request instance for CreateEmbedWebUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateEmbedWebUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateEmbedWebUrlResponse` def CreateEmbedWebUrl(request) body = send_request('CreateEmbedWebUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateEmbedWebUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 通过模板创建签署流程
# 适用场景：在标准制式的合同场景中，可通过提前预制好模板文件，每次调用模板文件的id，补充合同内容信息及签署信息生成电子合同。 # 注：配合创建电子文档和发起签署流程接口使用。整体的逻辑如下图 # CreateFlow创建签署流程CreateDocument创建电子文档StartFlow发起签署流程开始签署(小程序/H5等)控制台创建模板API # @param request: Request instance for CreateFlow. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowResponse` def CreateFlow(request) body = send_request('CreateFlow', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 适用场景： # 当通过模板或文件发起合同时，若未指定企业签署人信息，则可调用此接口补充或添加签署人。同一签署人可补充多个员工作为或签署人，最终实际签署人取决于谁先领取合同完成签署。 # 限制条件： # 1. 本企业（发起方企业）企业微信签署人仅支持通过企业微信UserId或姓名+手机号进行补充。 # 2. 本企业（发起方企业）非企业微信签署人仅支持通过姓名+手机号进行补充。 # 3. 他方企业仅支持通过姓名+手机号进行补充。 # @param request: Request instance for CreateFlowApprovers. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowApproversRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowApproversResponse` def CreateFlowApprovers(request) body = send_request('CreateFlowApprovers', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowApproversResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateFlowByFiles）用来通过上传后的pdf资源编号来创建待签署的合同流程。
# 适用场景1：适用非制式的合同文件签署。一般开发者自己有完整的签署文件，可以通过该接口传入完整的PDF文件及流程信息生成待签署的合同流程。
# 适用场景2：可通过该接口传入制式合同文件，同时在指定位置添加签署控件。可以起到接口创建临时模板的效果。如果是标准的制式文件，建议使用模板功能生成模板ID进行合同流程的生成。
# 注意事项：该接口需要依赖“多文件上传”接口生成pdf资源编号（FileIds）进行使用。
# @param request: Request instance for CreateFlowByFiles. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowByFilesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowByFilesResponse` def CreateFlowByFiles(request) body = send_request('CreateFlowByFiles', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowByFilesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 提交申请出证报告任务并返回报告ID。 # 注意： # # CreateFlowEvidenceReport提交申请出证报告任务DescribeFlowEvidenceReport获取出证报告任务执行结果 # @param request: Request instance for CreateFlowEvidenceReport. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowEvidenceReportRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowEvidenceReportResponse` def CreateFlowEvidenceReport(request) body = send_request('CreateFlowEvidenceReport', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowEvidenceReportResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateFlowGroupByFiles）可用于通过多个文件创建合同组签署流程。 # 适用场景：该接口适用于需要一次性完成多份合同签署的情况，多份合同一般具有关联性，用户以目录的形式查看合同。 # 注意事项：使用该接口需要先依赖[多文件上传](https://qian.tencent.com/developers/companyApis/templatesAndFiles/UploadFiles)接口返回的FileIds。 # @param request: Request instance for CreateFlowGroupByFiles. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowGroupByFilesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowGroupByFilesResponse` def CreateFlowGroupByFiles(request) body = send_request('CreateFlowGroupByFiles', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowGroupByFilesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateFlowGroupByTemplates）可用于通过多个模板创建合同组签署流程。 # 适用场景：该接口适用于需要一次性完成多份合同签署的情况，多份合同一般具有关联性，用户以目录的形式查看合同。 # @param request: Request instance for CreateFlowGroupByTemplates. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowGroupByTemplatesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowGroupByTemplatesResponse` def CreateFlowGroupByTemplates(request) body = send_request('CreateFlowGroupByTemplates', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowGroupByTemplatesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 指定需要批量催办的签署流程ID，批量催办合同，最多100个。需要符合以下条件的合同才可被催办： # 1. 发起合同时，签署人的NotifyType需设置为sms # 2. 合同中当前状态为“待签署”的签署人是催办的对象 # 3. 每个合同只能催办一次 # 注意：该接口无法直接调用，请联系客户经理申请使用。 # @param request: Request instance for CreateFlowReminds. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowRemindsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowRemindsResponse` def CreateFlowReminds(request) body = send_request('CreateFlowReminds', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowRemindsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 提交签署流程审批结果的适用场景包括： # 1. 在使用模板（CreateFlow）或文件（CreateFlowByFiles）创建签署流程时，若指定了参数NeedSignReview为true，且发起方企业作为签署方参与了流程签署，则可以调用此接口提交企业内部签署审批结果。自动签署也需要进行审核通过才会进行签署。 # 2. 若签署流程状态正常，同一签署流程可以多次提交签署审批结果，签署时的最后一个“审批结果”有效。 # @param request: Request instance for CreateFlowSignReview. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowSignReviewRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowSignReviewResponse` def CreateFlowSignReview(request) body = send_request('CreateFlowSignReview', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowSignReviewResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 该接口用于发起合同后，生成个人用户的签署链接, 暂时不支持企业端签署
# `注意：`
# `1. 该接口目前仅支持签署人类型是个人签署方的场景（PERSON）。`
# `2. 该接口可生成签署链接的C端签署人必须仅有手写签名和时间类型的签署控件，不支持填写控件 。`
# `3. 该签署链接有效期为30分钟，过期后将失效，如需签署可重新创建签署链接 。`
# `4. 该接口返回的签署链接是用于APP集成的场景，支持APP打开或浏览器直接打开，不支持微信小程序嵌入`。
# 跳转到小程序的实现，参考微信官方文档（分为全屏、半屏两种方式），如何配置也可以请参考: 跳转电子签小程序配置 # @param request: Request instance for CreateFlowSignUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateFlowSignUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateFlowSignUrlResponse` def CreateFlowSignUrl(request) body = send_request('CreateFlowSignUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateFlowSignUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateIntegrationDepartment）用于创建企业的部门信息，支持绑定客户系统部门ID。 # @param request: Request instance for CreateIntegrationDepartment. # @type request: :class:`Tencentcloud::ess::V20201111::CreateIntegrationDepartmentRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateIntegrationDepartmentResponse` def CreateIntegrationDepartment(request) body = send_request('CreateIntegrationDepartment', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateIntegrationDepartmentResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateIntegrationEmployees）用于创建企业员工。调用成功后会给员工发送提醒员工实名的短信。若通过手机号发现员工已经创建，则不会重新创建，但会发送短信提醒员工实名。另外，此接口还支持通过企微组织架构的openid 创建员工（将WeworkOpenId字段设置为企微员工明文的openid，但需确保该企微员工在应用的可见范围内），该场景下，员工会接收到提醒实名的企微消息。 # @param request: Request instance for CreateIntegrationEmployees. # @type request: :class:`Tencentcloud::ess::V20201111::CreateIntegrationEmployeesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateIntegrationEmployeesResponse` def CreateIntegrationEmployees(request) body = send_request('CreateIntegrationEmployees', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateIntegrationEmployeesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateIntegrationRole）用来创建企业自定义的SaaS角色或集团角色。 # 适用场景1：创建当前企业的自定义SaaS角色或集团角色，并且创建时不进行权限的设置（PermissionGroups 参数不传），角色中的权限内容可通过控制台编辑角色或通过接口 ModifyIntegrationRole 完成更新。 # 适用场景2：创建当前企业的自定义SaaS角色或集团角色，并且创建时进行权限的设置（PermissionGroups 参数要传），权限树内容 PermissionGroups 可参考接口 DescribeIntegrationRoles 的输出。 # 适用场景3：创建集团角色时可同时设置角色管理的子企业列表，可通过设置 SubOrganizationIds 参数达到此效果。 # 适用场景4：主企业代理子企业操作的场景，需要设置Agent参数，并且ProxyOrganizationId设置为子企业的id即可。 # 注意事项：SaaS角色和集团角色对应的权限树是不一样的。 # @param request: Request instance for CreateIntegrationRole. # @type request: :class:`Tencentcloud::ess::V20201111::CreateIntegrationRoleRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateIntegrationRoleResponse` def CreateIntegrationRole(request) body = send_request('CreateIntegrationRole', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateIntegrationRoleResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口用于赋予员工指定的角色权限，如需解绑请使用 DeleteIntegrationRoleUsers 接口。 # @param request: Request instance for CreateIntegrationUserRoles. # @type request: :class:`Tencentcloud::ess::V20201111::CreateIntegrationUserRolesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateIntegrationUserRolesResponse` def CreateIntegrationUserRoles(request) body = send_request('CreateIntegrationUserRoles', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateIntegrationUserRolesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（CreateMultiFlowSignQRCode）用于创建一码多扫流程签署二维码。 # 适用场景：无需填写签署人信息，可通过模板id生成签署二维码，签署人可通过扫描二维码补充签署信息进行实名签署。 # 常用于提前不知道签署人的身份信息场景，例如：劳务工招工、大批量员工入职等场景。 # **本接口适用于发起方没有填写控件的 B2C或者单C模板** # **若是B2C模板,还要满足以下任意一个条件** # - 模板中配置的签署顺序是无序 # - B端企业的签署方式是静默签署 # - B端企业是非首位签署 # 通过一码多扫二维码发起的合同，涉及到的合同回调消息可参考文档[合同发起以及签署相关回调](https://qian.tencent.com/developers/company/callback_types_contracts_sign) # 用户通过签署二维码发起合同时，因企业额度不足导致失败 会触发签署二维码相关回调,具体参考文档[签署二维码相关回调](https://qian.tencent.com/developers/company/callback_types_commons#%E7%AD%BE%E7%BD%B2%E4%BA%8C%E7%BB%B4%E7%A0%81%E7%9B%B8%E5%85%B3%E5%9B%9E%E8%B0%83) # @param request: Request instance for CreateMultiFlowSignQRCode. # @type request: :class:`Tencentcloud::ess::V20201111::CreateMultiFlowSignQRCodeRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateMultiFlowSignQRCodeResponse` def CreateMultiFlowSignQRCode(request) body = send_request('CreateMultiFlowSignQRCode', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateMultiFlowSignQRCodeResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 使用此接口，您可以创建企业批量签署链接，员工只需点击链接即可跳转至控制台进行批量签署。
# 附注： # - 员工必须在企业下完成实名认证，且需作为批量签署合同的签署方。 # - 如有UserId，应以UserId为主要标识；如果没有UserId，则必须填写Name和Mobile信息。 # @param request: Request instance for CreateOrganizationBatchSignUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateOrganizationBatchSignUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateOrganizationBatchSignUrlResponse` def CreateOrganizationBatchSignUrl(request) body = send_request('CreateOrganizationBatchSignUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateOrganizationBatchSignUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 获取个人用户认证证书图片下载URL # 个人用户认证证书图片样式如下图 # ![image](https://dyn.ess.tencent.cn/guide/capi/CreatePersonAuthCertificateImage.png) # 注: # # @param request: Request instance for CreatePersonAuthCertificateImage. # @type request: :class:`Tencentcloud::ess::V20201111::CreatePersonAuthCertificateImageRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreatePersonAuthCertificateImageResponse` def CreatePersonAuthCertificateImage(request) body = send_request('CreatePersonAuthCertificateImage', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreatePersonAuthCertificateImageResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 创建发起流程web页面 #
适用场景：通过该接口（CreatePrepareFlow）传入合同文件/模板编号及签署人信息，可获得发起流程的可嵌入页面，在页面完成签署控件等信息的编辑与确认后，快速发起流程。 #
注：该接口包含模板/文件发起流程的全部功能，调用接口后不会立即发起，需在可嵌入页面点击按钮进行发起流程。 # @param request: Request instance for CreatePrepareFlow. # @type request: :class:`Tencentcloud::ess::V20201111::CreatePrepareFlowRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreatePrepareFlowResponse` def CreatePrepareFlow(request) body = send_request('CreatePrepareFlow', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreatePrepareFlowResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（CreatePreparedPersonalEsign）用于创建导入个人印章（处方单场景专用，使用此接口请与客户经理确认）。 # @param request: Request instance for CreatePreparedPersonalEsign. # @type request: :class:`Tencentcloud::ess::V20201111::CreatePreparedPersonalEsignRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreatePreparedPersonalEsignResponse` def CreatePreparedPersonalEsign(request) body = send_request('CreatePreparedPersonalEsign', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreatePreparedPersonalEsignResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 发起解除协议的主要应用场景为：基于一份已经签署的合同（签署流程），进行解除操作。 # 解除协议的模板是官方提供 ，经过提供法务审核，暂不支持自定义。 # 注意： # # @param request: Request instance for CreateReleaseFlow. # @type request: :class:`Tencentcloud::ess::V20201111::CreateReleaseFlowRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateReleaseFlowResponse` def CreateReleaseFlow(request) body = send_request('CreateReleaseFlow', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateReleaseFlowResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 获取跳转至腾讯电子签小程序的签署链接 # 适用场景：如果需要签署人在自己的APP、小程序、H5应用中签署，可以通过此接口获取跳转腾讯电子签小程序的签署跳转链接。 # 跳转到小程序的实现，参考微信官方文档（分为全屏、半屏两种方式），如何配置也可以请参考: 跳转电子签小程序配置 # 注： # `1. 如果签署人是在PC端扫码签署，可以通过生成跳转链接自主转换成二维码，让签署人在PC端扫码签署` # `2. 签署链接的有效期为90天，超过有效期链接不可用` # 其中小程序的原始Id如下，或者查看小程序信息自助获取。 # | 小程序 | AppID | 原始ID | # | ------------ | ------------ | ------------ | # | 腾讯电子签（正式版） | wxa023b292fd19d41d | gh_da88f6188665 | # | 腾讯电子签Demo | wx371151823f6f3edf | gh_39a5d3de69fa | # @param request: Request instance for CreateSchemeUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateSchemeUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateSchemeUrlResponse` def CreateSchemeUrl(request) body = send_request('CreateSchemeUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateSchemeUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（CreateSeal）用于创建企业电子印章，支持创建企业公章，合同章，财务专用章和人事专用章创建。 # @param request: Request instance for CreateSeal. # @type request: :class:`Tencentcloud::ess::V20201111::CreateSealRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateSealResponse` def CreateSeal(request) body = send_request('CreateSeal', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateSealResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（CreateSealPolicy）用于对企业员工进行印章授权 # @param request: Request instance for CreateSealPolicy. # @type request: :class:`Tencentcloud::ess::V20201111::CreateSealPolicyRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateSealPolicyResponse` def CreateSealPolicy(request) body = send_request('CreateSealPolicy', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateSealPolicyResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 获取个人用户自动签的开通链接。 # 注意: `处方单等特殊场景专用，此接口为白名单功能，使用前请联系对接的客户经理沟通。` # @param request: Request instance for CreateUserAutoSignEnableUrl. # @type request: :class:`Tencentcloud::ess::V20201111::CreateUserAutoSignEnableUrlRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateUserAutoSignEnableUrlResponse` def CreateUserAutoSignEnableUrl(request) body = send_request('CreateUserAutoSignEnableUrl', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateUserAutoSignEnableUrlResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 用来设置本企业嵌入式页面个性化主题配置（例如是否展示电子签logo、定义主题色等），设置后获取的web签署界面都会使用此配置进行展示。 # 如果多次调用，会以最后一次的配置为准 # @param request: Request instance for CreateWebThemeConfig. # @type request: :class:`Tencentcloud::ess::V20201111::CreateWebThemeConfigRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::CreateWebThemeConfigResponse` def CreateWebThemeConfig(request) body = send_request('CreateWebThemeConfig', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = CreateWebThemeConfigResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（DeleteIntegrationDepartment）用于删除企业的部门信息。 # @param request: Request instance for DeleteIntegrationDepartment. # @type request: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationDepartmentRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationDepartmentResponse` def DeleteIntegrationDepartment(request) body = send_request('DeleteIntegrationDepartment', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DeleteIntegrationDepartmentResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 该接口（DeleteIntegrationEmployees）用于移除企业员工，同时可选择是否进行离职交接。 # - 如果不设置交接人的ReceiveUserId或ReceiveOpenId，则该员工将被直接移除而不进行交接操作。 # - 如果设置了ReceiveUserId或ReceiveOpenId，该员工未处理的合同将会被系统交接给设置的交接人，然后再对该员工进行离职操作。 # 注：`1. 超管或法人身份的员工不能被删除。2. 员工存在待处理合同且无人交接时不能被删除。` # @param request: Request instance for DeleteIntegrationEmployees. # @type request: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationEmployeesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationEmployeesResponse` def DeleteIntegrationEmployees(request) body = send_request('DeleteIntegrationEmployees', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DeleteIntegrationEmployeesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 解绑员工与对应角色的关系，如需绑定请使用 CreateIntegrationUserRoles 接口。 # @param request: Request instance for DeleteIntegrationRoleUsers. # @type request: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationRoleUsersRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DeleteIntegrationRoleUsersResponse` def DeleteIntegrationRoleUsers(request) body = send_request('DeleteIntegrationRoleUsers', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DeleteIntegrationRoleUsersResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（DeleteSealPolicies）用于撤销企业员工持有的印章权限 # @param request: Request instance for DeleteSealPolicies. # @type request: :class:`Tencentcloud::ess::V20201111::DeleteSealPoliciesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DeleteSealPoliciesResponse` def DeleteSealPolicies(request) body = send_request('DeleteSealPolicies', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DeleteSealPoliciesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 查询企业扩展服务的开通和授权情况，当前支持查询以下内容： # 1. 企业静默签 # 2. 企业与港澳台居民签署合同 # 3. 使用手机号验证签署方身份 # 4. 骑缝章 # 5. 批量签署能力 # @param request: Request instance for DescribeExtendedServiceAuthInfos. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeExtendedServiceAuthInfosRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeExtendedServiceAuthInfosResponse` def DescribeExtendedServiceAuthInfos(request) body = send_request('DescribeExtendedServiceAuthInfos', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeExtendedServiceAuthInfosResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 本接口（DescribeFileUrls）用于查询文件的下载URL。 # 适用场景：通过传参合同流程编号，下载对应的合同PDF文件流到本地。 # @param request: Request instance for DescribeFileUrls. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFileUrlsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFileUrlsResponse` def DescribeFileUrls(request) body = send_request('DescribeFileUrls', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFileUrlsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 查询流程基础信息 # 适用场景：可用于主动查询某个合同流程的签署状态信息。可以配合回调通知使用。 # 注: `每个企业限制日调用量限制：100W，当日超过此限制后再调用接口返回错误` # @param request: Request instance for DescribeFlowBriefs. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFlowBriefsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFlowBriefsResponse` def DescribeFlowBriefs(request) body = send_request('DescribeFlowBriefs', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFlowBriefsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 查询流程填写控件内容，可以根据合同流程ID查询该合同流程相关联的填写控件信息和填写内容。 # @param request: Request instance for DescribeFlowComponents. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFlowComponentsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFlowComponentsResponse` def DescribeFlowComponents(request) body = send_request('DescribeFlowComponents', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFlowComponentsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 获取出证报告任务执行结果，返回报告 URL。 # 注意： # # CreateFlowEvidenceReport提交申请出证报告任务DescribeFlowEvidenceReport获取出证报告任务执行结果 # @param request: Request instance for DescribeFlowEvidenceReport. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFlowEvidenceReportRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFlowEvidenceReportResponse` def DescribeFlowEvidenceReport(request) body = send_request('DescribeFlowEvidenceReport', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFlowEvidenceReportResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 接口用户查询合同流程的详情信息, 支持查询多个(数量不能超过100) # 适用场景：可用于主动查询某个合同详情信息。 # @param request: Request instance for DescribeFlowInfo. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFlowInfoRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFlowInfoResponse` def DescribeFlowInfo(request) body = send_request('DescribeFlowInfo', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFlowInfoResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（DescribeFlowTemplates）用于查询本企业模板列表信息。 # > 一个模板通常会包含以下结构信息 # >- 模板基本信息 # >- 发起方参与信息Promoter、签署参与方 Recipients，后者会在模板发起合同时用于指定参与方 # >- 填写控件 Components # >- 签署控件 SignComponents # >- 生成模板的文件基础信息 FileInfos # 当模板较多或模板中的控件较多时，可以通过查询模板接口更方便的获取模板列表，以及每个模板内的控件信息。 # 适用场景： # 该接口常用来配合模板发起合同-创建电子文档接口，作为创建电子文档的前置接口使用。 # 通过此接口查询到模板信息后，再通过调用创建电子文档接口，指定模板ID，指定模板中需要的填写控件内容等，完成电子文档的创建。 # @param request: Request instance for DescribeFlowTemplates. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeFlowTemplatesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeFlowTemplatesResponse` def DescribeFlowTemplates(request) body = send_request('DescribeFlowTemplates', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeFlowTemplatesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（DescribeIntegrationDepartments）用于查询企业的部门信息列表，支持查询单个部门节点或单个部门节点及一级子节点部门列表。 # @param request: Request instance for DescribeIntegrationDepartments. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationDepartmentsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationDepartmentsResponse` def DescribeIntegrationDepartments(request) body = send_request('DescribeIntegrationDepartments', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeIntegrationDepartmentsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（DescribeIntegrationEmployees）用于分页查询企业员工信息列表，支持设置过滤条件以筛选员工查询结果。 # @param request: Request instance for DescribeIntegrationEmployees. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationEmployeesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationEmployeesResponse` def DescribeIntegrationEmployees(request) body = send_request('DescribeIntegrationEmployees', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeIntegrationEmployeesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（DescribeIntegrationRoles）用于分页查询企业角色列表，列表按照角色创建时间升序排列。 # 注：`法人角色是系统保留角色，因此返回列表中不含法人角色。` # @param request: Request instance for DescribeIntegrationRoles. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationRolesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeIntegrationRolesResponse` def DescribeIntegrationRoles(request) body = send_request('DescribeIntegrationRoles', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeIntegrationRolesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此API接口用来查询加入集团的成员企业信息 # 适用场景：子企业在加入集团后，主企业可能通过此接口获取到所有的子企业列表，方便进行展示和统计 # @param request: Request instance for DescribeOrganizationGroupOrganizations. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeOrganizationGroupOrganizationsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeOrganizationGroupOrganizationsResponse` def DescribeOrganizationGroupOrganizations(request) body = send_request('DescribeOrganizationGroupOrganizations', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeOrganizationGroupOrganizationsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 查询企业印章的列表，需要操作者具有查询印章权限 # 客户指定需要获取的印章数量和偏移量，数量最多100，超过100按100处理；入参InfoType控制印章是否携带授权人信息，为1则携带，为0则返回的授权人信息为空数组。接口调用成功返回印章的信息列表还有企业印章的总数。 # @param request: Request instance for DescribeOrganizationSeals. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeOrganizationSealsRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeOrganizationSealsResponse` def DescribeOrganizationSeals(request) body = send_request('DescribeOrganizationSeals', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeOrganizationSealsResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 通过AuthCode查询个人用户是否实名 # 注意: # # @param request: Request instance for DescribeThirdPartyAuthCode. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeThirdPartyAuthCodeRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeThirdPartyAuthCodeResponse` def DescribeThirdPartyAuthCode(request) body = send_request('DescribeThirdPartyAuthCode', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeThirdPartyAuthCodeResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 通过此接口获取个人用户自动签的开通状态。 # 注意: `处方单等特殊场景专用，此接口为白名单功能，使用前请联系对接的客户经理沟通。` # @param request: Request instance for DescribeUserAutoSignStatus. # @type request: :class:`Tencentcloud::ess::V20201111::DescribeUserAutoSignStatusRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DescribeUserAutoSignStatusResponse` def DescribeUserAutoSignStatus(request) body = send_request('DescribeUserAutoSignStatus', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DescribeUserAutoSignStatusResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 通过此接口可以关闭个人用户自动签功能。 # 无需对应的用户刷脸等方式同意即可关闭。 # 注意: # # @param request: Request instance for DisableUserAutoSign. # @type request: :class:`Tencentcloud::ess::V20201111::DisableUserAutoSignRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::DisableUserAutoSignResponse` def DisableUserAutoSign(request) body = send_request('DisableUserAutoSign', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = DisableUserAutoSignResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 查询转换任务的状态。转换任务Id通过发起转换任务接口（CreateConvertTaskApi）获取。 # 注意：大文件转换所需的时间可能会比较长。 # @param request: Request instance for GetTaskResultApi. # @type request: :class:`Tencentcloud::ess::V20201111::GetTaskResultApiRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::GetTaskResultApiResponse` def GetTaskResultApi(request) body = send_request('GetTaskResultApi', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = GetTaskResultApiResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 新增/删除企业应用集成中的回调配置。 # 新增回调配置只会增加不存在的CallbackUrl；删除操作将针对找到的相同CallbackUrl的配置进行删除。 # 请确保回调地址能够接收并处理 HTTP POST 请求，并返回状态码 200 以表示处理正常。 # 更多回调相关的说明参考文档[回调通知能力](https://qian.tencent.com/developers/company/callback_types_v2) # @param request: Request instance for ModifyApplicationCallbackInfo. # @type request: :class:`Tencentcloud::ess::V20201111::ModifyApplicationCallbackInfoRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::ModifyApplicationCallbackInfoResponse` def ModifyApplicationCallbackInfo(request) body = send_request('ModifyApplicationCallbackInfo', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = ModifyApplicationCallbackInfoResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（ModifyIntegrationDepartment）用于更新企业的部门信息，支持更新部门名称、客户系统部门ID和部门序号等信息。 # @param request: Request instance for ModifyIntegrationDepartment. # @type request: :class:`Tencentcloud::ess::V20201111::ModifyIntegrationDepartmentRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::ModifyIntegrationDepartmentResponse` def ModifyIntegrationDepartment(request) body = send_request('ModifyIntegrationDepartment', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = ModifyIntegrationDepartmentResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（ModifyIntegrationRole）用来更新企业自定义的SaaS角色或集团角色。 # 适用场景1：更新当前企业的自定义SaaS角色或集团角色，并且更新时不进行角色中权限的更新（PermissionGroups 参数不传）。 # 适用场景2：更新当前企业的自定义SaaS角色或集团角色，并且更新时进行角色中权限的设置（PermissionGroups 参数要传），权限树内容 PermissionGroups 可参考接口 DescribeIntegrationRoles 的输出。 # 适用场景3：更新集团角色管理的子企业列表，可通过设置 SubOrganizationIds 参数达到此效果。 # 适用场景4：主企业代理子企业操作的场景，需要设置Agent参数，并且ProxyOrganizationId设置为子企业的id即可。 # 注意事项：SaaS角色和集团角色对应的权限树是不一样的。 # @param request: Request instance for ModifyIntegrationRole. # @type request: :class:`Tencentcloud::ess::V20201111::ModifyIntegrationRoleRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::ModifyIntegrationRoleResponse` def ModifyIntegrationRole(request) body = send_request('ModifyIntegrationRole', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = ModifyIntegrationRoleResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口用于启动流程。它是模板发起合同的最后一步。 # 在[创建签署流程](https://qian.tencent.com/developers/companyApis/startFlows/CreateFlow)和[创建电子文档](https://qian.tencent.com/developers/companyApis/startFlows/CreateDocument)之后，用于开始整个合同流程, 推进流程进入到签署环节。 # CreateFlow创建签署流程CreateDocument创建电子文档StartFlow发起签署流程开始签署(小程序/H5等)控制台创建模板API # @param request: Request instance for StartFlow. # @type request: :class:`Tencentcloud::ess::V20201111::StartFlowRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::StartFlowResponse` def StartFlow(request) body = send_request('StartFlow', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = StartFlowResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（UnbindEmployeeUserIdWithClientOpenId）用于解除电子签系统员工UserId与客户系统员工OpenId之间的绑定关系。 # 注：`在调用此接口时，需确保OpenId已通过调用`BindEmployeeUserIdWithClientOpenId`接口与电子签系统的UserId绑定过。若OpenId未经过绑定，则无法使用此接口进行解绑操作。` # @param request: Request instance for UnbindEmployeeUserIdWithClientOpenId. # @type request: :class:`Tencentcloud::ess::V20201111::UnbindEmployeeUserIdWithClientOpenIdRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::UnbindEmployeeUserIdWithClientOpenIdResponse` def UnbindEmployeeUserIdWithClientOpenId(request) body = send_request('UnbindEmployeeUserIdWithClientOpenId', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = UnbindEmployeeUserIdWithClientOpenIdResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 更新员工信息(姓名，手机号，邮件、部门)，用户实名后无法更改姓名与手机号。 # 可进行批量操作，Employees中的userID与openID二选一必填 # @param request: Request instance for UpdateIntegrationEmployees. # @type request: :class:`Tencentcloud::ess::V20201111::UpdateIntegrationEmployeesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::UpdateIntegrationEmployeesResponse` def UpdateIntegrationEmployees(request) body = send_request('UpdateIntegrationEmployees', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = UpdateIntegrationEmployeesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 此接口（UploadFiles）用于文件上传。
# 适用场景：用于生成pdf资源编号（FileIds）来配合“用PDF创建流程”接口使用，使用场景可详见“用PDF创建流程”接口说明。
# 其中上传的文件，图片类型(png/jpg/jpeg)大小限制为5M，其他大小限制为60M。
# 调用时需要设置Domain/接口请求域名为 file.ess.tencent.cn,代码示例：
# HttpProfile httpProfile = new HttpProfile();
# httpProfile.setEndpoint("file.test.ess.tencent.cn");
# @param request: Request instance for UploadFiles. # @type request: :class:`Tencentcloud::ess::V20201111::UploadFilesRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::UploadFilesResponse` def UploadFiles(request) body = send_request('UploadFiles', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = UploadFilesResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end # 对合同流程文件进行数字签名验证，判断数字签名是否有效，合同文件内容是否被篡改。 # @param request: Request instance for VerifyPdf. # @type request: :class:`Tencentcloud::ess::V20201111::VerifyPdfRequest` # @rtype: :class:`Tencentcloud::ess::V20201111::VerifyPdfResponse` def VerifyPdf(request) body = send_request('VerifyPdf', request.serialize) response = JSON.parse(body) if response['Response'].key?('Error') == false model = VerifyPdfResponse.new model.deserialize(response['Response']) model else code = response['Response']['Error']['Code'] message = response['Response']['Error']['Message'] reqid = response['Response']['RequestId'] raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid) end rescue TencentCloud::Common::TencentCloudSDKException => e raise e rescue StandardError => e raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect) end end end end end