rails_semantic_logger ===================== Improved logging for Ruby on Rails * http://github.com/ClarityServices/rails_semantic_logger ### Overview Rails Semantic Logger replaces the Rails default logger with [Semantic Logger](http://github.com/ClarityServices/semantic_logger) [Semantic Logger](http://github.com/ClarityServices/semantic_logger) takes logging in Ruby to a new level by adding several new capabilities to the commonly used Logging API: Dynamic * Increase the log level at runtime for just one class * For example enable debug level logging for a single class (logging instance) while the program is running to get more detailed logging in production for just that class Tagged Logging * Supply custom data to be added to every log entry within a block of code, including libraries and existing gems * Tagged logging is critical for any high traffic site so that one can narrow down log entries for a single call that is mixed in with log entries from hundreds of other log entries High Performance * Logging is performed in a separate thread so as not to impact performance of running code Customizable * Custom formatting by destination * Easy to "roll your own" destination (Appender). For example to log to Hadoop, Redis, etc.. Payload support * Aside from the regular log message, a hash payload can also be supplied with every log entry * Very powerful when logging to NOSQL destinations that allow queries against any data in the payload Exceptions * Directly log exceptions * Semantic Logger standardizes the logging of exceptions with their backtraces to text destinations and writes the exception elements as a hash to NOSQL destinations Drop-in Replacement * Simple drop-in replacement for the Ruby, or the Rails loggers * Supports current common logging interface * No changes to existing to code to use new logger ( other than replacing the logger ) Rails 2, 3 & 4 Support * Just include the semantic_logger gem into Rails and it will immediately replace the existing loggers to improve performance and information in the log files * The Rails 3 Tagged logging feature is already available for Rails 2 by using Semantic Logger * Rails 4 push_tags and pop_tags methods are supported Thread Aware * Includes the process and thread id information in every log entry * If running JRuby it will also include the name of the thread for every log entry Trace Level * :trace is a new level common in other languages and is commonly used for logging trace level detail. It is intended for logging data at level below :debug. * :trace can be used for logging the actual data sent or received over the network that is rarely needed but is critical when things are not working as expected. * Since :trace can be enabled on a per class basis it can even be turned on in production to resolve what was actually sent to an external vendor Multiple Destinations * Log to multiple destinations at the same time ( File and MongoDB, etc.. ) * Each destination can also have its own log level. For example, only log :info and above to MongoDB, or :warn and above to a second log file Benchmarking * The performance of any block of code can be measured and logged at the same time depending on the active log level Semantic Capabilities * With Semantic Logger it is simple to mix-in additional semantic information with every log entry * The application or class name is automatically included for every log entry under a specific logging instance * Includes the duration of blocks of code * Any hash containing context specific information such as user_id or location information Beyond Tagged Logging * Supply entire hash of custom data to be added to the payload of every log entry within a block of code, including libraries and existing gems NOSQL Destinations * Every log entry is broken down into elements that NOSQL data stores can understand: ```json { "_id" : ObjectId("5034fa48e3f3fea945e83ef2"), "time" : ISODate("2012-08-22T15:27:04.409Z"), "host_name" : "release", "pid" : 16112, "thread_name" : "main", "name" : "UserLocator", "level" : "debug", "message" : "Fetch user information", "duration" : 12, "payload" : { "user" : "Jack", "zip_code" : 12345, "location" : "US" } } ``` Thread Safe * Semantic Logger is completely thread safe and all methods can be called concurrently from any thread * Tagged logging keeps any tagging data on a per-thread basis to ensure that tags from different threads are not inter-mingled ### Introduction Just by including the rails_semantic_logger gem, Rails Semantic Logger will replace the default Rails logger with Semantic Logger. Without further configuration it will log to the existing Rails log file in a more efficient multi-threaded way. Extract from a Rails log file after adding the semantic_logger gem: ``` 2012-10-19 12:05:46.736 I [35940:JRubyWorker-10] Rails -- Started GET "/" for 127.0.0.1 at 2012-10-19 12:05:46 +0000 2012-10-19 12:05:47.318 I [35940:JRubyWorker-10] ActionController -- Processing by AdminController#index as HTML 2012-10-19 12:05:47.633 D [35940:JRubyWorker-10] ActiveRecord -- User Load (2.0ms) SELECT `users`.* FROM `users` WHERE `users`.`id` = 1 LIMIT 1 2012-10-19 12:05:49.833 D [35940:JRubyWorker-10] ActiveRecord -- Role Load (2.0ms) SELECT `roles`.* FROM `roles` 2012-10-19 12:05:49.868 D [35940:JRubyWorker-10] ActiveRecord -- Role Load (1.0ms) SELECT * FROM `roles` INNER JOIN `roles_users` ON `roles`.id = `roles_users`.role_id WHERE (`roles_users`.user_id = 1 ) 2012-10-19 12:05:49.885 I [35940:JRubyWorker-10] ActionController -- Rendered menus/_control_system.html.erb (98.0ms) 2012-10-19 12:05:51.014 I [35940:JRubyWorker-10] ActionController -- Rendered layouts/_top_bar.html.erb (386.0ms) 2012-10-19 12:05:51.071 D [35940:JRubyWorker-10] ActiveRecord -- Announcement Load (20.0ms) SELECT `announcements`.* FROM `announcements` WHERE `announcements`.`active` = 1 ORDER BY created_at desc 2012-10-19 12:05:51.072 I [35940:JRubyWorker-10] ActionController -- Rendered layouts/_announcement.html.erb (26.0ms) 2012-10-19 12:05:51.083 I [35940:JRubyWorker-10] ActionController -- Rendered layouts/_flash.html.erb (4.0ms) 2012-10-19 12:05:51.109 I [35940:JRubyWorker-10] ActionController -- Rendered layouts/_footer.html.erb (16.0ms) 2012-10-19 12:05:51.109 I [35940:JRubyWorker-10] ActionController -- Rendered admin/index.html.erb within layouts/base (1329.0ms) 2012-10-19 12:05:51.113 I [35940:JRubyWorker-10] ActionController -- Completed 200 OK in 3795ms (Views: 1349.0ms | ActiveRecord: 88.0ms | Mongo: 0.0ms) ``` ### Logging API #### Standard Logging methods The Semantic Logger logging API supports the existing logging interface for the Rails and Ruby Loggers. For example: ```ruby logger.info("Hello World") ``` Or to query whether a specific log level is set ```ruby logger.info? ``` The following logging methods are available ```ruby trace(message, payload=nil, exception=nil, &block) debug(message, payload=nil, exception=nil, &block) info(message, payload=nil, exception=nil, &block) warn(message, payload=nil, exception=nil, &block) error(message, payload=nil, exception=nil, &block) fatal(message, payload=nil, exception=nil, &block) ``` Parameters - message: The text message to log. Mandatory only if no block is supplied - payload: Optional, either a Ruby Exception object or a Hash - exception: Optional, Ruby Exception object. Allows both an exception and a payload to be logged - block: The optional block is executed only if the corresponding log level is active. Can be used to prevent unnecessary calculations of debug data in production. Examples: ```ruby logger.debug("Calling Supplier") logger.debug("Calling Supplier", :request => 'update', :user => 'Jack') logger.debug { "A total of #{result.inject(0) {|sum, i| i+sum }} were processed" } ``` ### Exceptions The Semantic Logger adds an optional parameter to the existing log methods so that a corresponding Exception can be logged in a standard way ```ruby begin # ... Code that can raise an exception rescue Exception => exception logger.error("Oops external call failed", exception) # Re-raise or handle the exception raise exception end ``` #### Payload The Semantic Logger adds an extra parameter to the existing log methods so that additional payload can be logged, such as a Hash or a Ruby Exception object. ```ruby logger.info("Oops external call failed", :result => :failed, :reason_code => -10) ``` The additional payload is machine readable so that we don't have to write complex regular expressions so that a program can analyze log output. With the MongoDB appender the payload is written directly to MongoDB as part of the document and is therefore fully searchable #### Benchmarking Another common logging requirement is to measure the time it takes to execute a block of code based on the log level. For example: ```ruby Rails.logger.benchmark_info "Calling external interface" do # Code to call external service ... end ``` The following output will be written to file: 2012-08-30 15:37:29.474 I [48308:ScriptThreadProcess: script/rails] (5.2ms) Rails -- Calling external interface If an exception is raised during the block the exception is logged at the same log level as the benchmark along with the duration and message. The exception will flow through to the caller unchanged The following benchmarking methods are available ```ruby benchmark_trace(message, params=nil, &block) benchmark_debug(message, params=nil, &block) benchmark_info(message, params=nil, &block) benchmark_warn(message, params=nil, &block) benchmark_error(message, params=nil, &block) benchmark_fatal(message, params=nil, &block) ``` Parameters - message: The mandatory text message to log. - params: ``` :log_exception Control whether or how an exception thrown in the block is reported by Semantic Logger. Values: :full Log the exception class, message, and backtrace :partial Log the exception class and messag The backtrace will not be logged :off Any unhandled exception from the block will not be logged :min_duration Only log if the block takes longer than this duration in ms Default: 0.0 :payload Optional, Hash payload :exception Optional, Ruby Exception object to log along with the duration of the supplied block ``` #### Logging levels The following logging levels are available through Semantic Logger :trace, :debug, :info, :warn, :error, :fatal The log levels are listed above in the order of precedence with the most detail to the least. For example :debug would include :info, :warn, :error, :fatal levels but not :trace And :fatal would only log :fatal error messages and nothing else :unknown has been mapped to :fatal for Rails and Ruby Logger :trace is a new level that is often used for tracing low level calls such as the data sent or received to external web services. It is also commonly used in the development environment for low level trace logging of methods calls etc. If only the rails logger is being used, then :trace level calls will be logged as debug calls only if the log level is set to trace #### Changing the Class name for Log Entries When Semantic Logger is included in a Rails project it automatically replaces the loggers for Rails, ActiveRecord::Base, ActionController::Base, and ActiveResource::Base with wrappers that set their Class name. For example: ```ruby ActiveRecord::Base.logger = SemanticLogger::Logger.new(ActiveRecord) ``` By replacing their loggers we now get the class name in the text logging output: 2012-08-30 15:24:13.439 D [47900:main] ActiveRecord -- SQL (12.0ms) SELECT `schema_migrations`.`version` FROM `schema_migrations` It is recommended to include a class specific logger for all major classes that will be logging using the SemanticLogger::Loggable mix-in. For Example: ```ruby require 'semantic_logger' class ExternalSupplier # Lazy load logger class variable on first use include SemanticLogger::Loggable def call_supplier(amount, name) logger.debug "Calculating with amount", { :amount => amount, :name => name } # Measure and log on completion how long the call took to the external supplier logger.benchmark_info "Calling external interface" do # Code to call the external supplier ... end end end ``` This will result in the log output identifying the log entry as from the ExternalSupplier class 2012-08-30 15:37:29.474 I [48308:ScriptThreadProcess: script/rails] (5.2ms) ExternalSupplier -- Calling external interface #### Tagged Logging Semantic Logger allows any Ruby or Rails program to also include tagged logging. This means that any logging performed within a block, including any called libraries or gems to include the specified tag with every log entry. Using Tagged logging is critical in any highly concurrent environment so that one can quickly find all related log entries across all levels of code, and even across threads ```ruby logger.tagged(tracking_number) do logger.debug("Hello World") # ... end ``` #### Beyond Tagged Logging Blocks of code can be tagged with not only values, but can be tagged with entire hashes of data. The additional hash of data will be merged into the payload of every log entry For example every corresponding log entry could include a hash containing a user_id, name, region, zip_code, tracking_number, etc... ```ruby logger.with_payload(:user => 'Jack', :zip_code => 12345) do logger.debug("Hello World") # ... end ``` #### Installation Add the following line to Gemfile ```ruby gem 'rails_semantic_logger' ``` Install required gems with bundler bundle install This will automatically replace the standard Rails logger with Semantic Logger which will write all log data to the configured Rails logger. #### Configuration By default Semantic Logger will detect the log level from Rails. To set the log level explicitly, add the following line to config/environments/production.rb inside the Application.configure block ```ruby config.log_level = :trace ``` To log to both the Rails log file and MongoDB add the following lines to config/environments/production.rb inside the Application.configure block ```ruby config.after_initialize do # Re-use the existing MongoDB connection, or create a new one here db = Mongo::Connection.new['production_logging'] # Besides logging to the standard Rails logger, also log to MongoDB config.semantic_logger.add_appender SemanticLogger::Appender::MongoDB.new( :db => db, :collection_name => 'semantic_logger', :collection_size => 25.gigabytes ) end ``` If the Rails colorized logging is enabled, then the colorized formatter will be used by default. To disable colorized logging in both Rails and SemanticLogger: ```ruby config.colorize_logging = false ``` ### Custom Appenders and Formatters To write your own appenders or formatting, see [SemanticLogger](http://github.com/ClarityServices/semantic_logger) ### Log Rotation Since the log file is not re-opened with every call, when the log file needs to be rotated, use a copy-truncate operation rather than deleting the file. ### Dependencies - Ruby MRI 1.8.7, 1.9.3 (or above) Or, JRuby 1.6.3 (or above) - Rails 2, 3, 4 or above Meta ---- * Code: `git clone git://github.com/ClarityServices/rails_semantic_logger.git` * Home: * Bugs: * Gems: This project uses [Semantic Versioning](http://semver.org/). Authors ------- Reid Morrison :: reidmo@gmail.com :: @reidmorrison License ------- Copyright 2012 Clarity Services, Inc. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.