# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Tke
module V20180525
# AcquireClusterAdminRole请求参数结构体
class AcquireClusterAdminRoleRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# AcquireClusterAdminRole返回参数结构体
class AcquireClusterAdminRoleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddClusterCIDR请求参数结构体
class AddClusterCIDRRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterCIDRs: 增加的ClusterCIDR
# @type ClusterCIDRs: Array
# @param IgnoreClusterCIDRConflict: 是否忽略ClusterCIDR与VPC路由表的冲突
# @type IgnoreClusterCIDRConflict: Boolean
attr_accessor :ClusterId, :ClusterCIDRs, :IgnoreClusterCIDRConflict
def initialize(clusterid=nil, clustercidrs=nil, ignoreclustercidrconflict=nil)
@ClusterId = clusterid
@ClusterCIDRs = clustercidrs
@IgnoreClusterCIDRConflict = ignoreclustercidrconflict
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterCIDRs = params['ClusterCIDRs']
@IgnoreClusterCIDRConflict = params['IgnoreClusterCIDRConflict']
end
end
# AddClusterCIDR返回参数结构体
class AddClusterCIDRResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddExistedInstances请求参数结构体
class AddExistedInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 实例列表，不支持竞价实例
# @type InstanceIds: Array
# @param InstanceAdvancedSettings: 实例额外需要设置参数信息(默认值)
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param EnhancedService: 增强服务。通过该参数可以指定是否开启云安全、云监控等服务。若不指定该参数，则默认开启云监控、云安全服务。
# @type EnhancedService: :class:`Tencentcloud::Tke.v20180525.models.EnhancedService`
# @param LoginSettings: 节点登录信息（目前仅支持使用Password或者单个KeyIds）
# @type LoginSettings: :class:`Tencentcloud::Tke.v20180525.models.LoginSettings`
# @param HostName: 重装系统时，可以指定修改实例的HostName(集群为HostName模式时，此参数必传，规则名称除不支持大写字符外与[CVM创建实例](https://cloud.tencent.com/document/product/213/15730)接口HostName一致)
# @type HostName: String
# @param SecurityGroupIds: 实例所属安全组。该参数可以通过调用 DescribeSecurityGroups 的返回值中的sgId字段来获取。若不指定该参数，则绑定默认安全组。（目前仅支持设置单个sgId）
# @type SecurityGroupIds: Array
# @param NodePool: 节点池选项
# @type NodePool: :class:`Tencentcloud::Tke.v20180525.models.NodePoolOption`
# @param SkipValidateOptions: 校验规则相关选项，可配置跳过某些校验规则。目前支持GlobalRouteCIDRCheck（跳过GlobalRouter的相关校验），VpcCniCIDRCheck（跳过VpcCni相关校验）
# @type SkipValidateOptions: Array
# @param InstanceAdvancedSettingsOverrides: 参数InstanceAdvancedSettingsOverride数组用于定制化地配置各台instance，与InstanceIds顺序对应。当传入InstanceAdvancedSettingsOverrides数组时，将覆盖默认参数InstanceAdvancedSettings；当没有传入参数InstanceAdvancedSettingsOverrides时，InstanceAdvancedSettings参数对每台instance生效。
# 参数InstanceAdvancedSettingsOverride数组的长度应与InstanceIds数组一致；当长度大于InstanceIds数组长度时将报错；当长度小于InstanceIds数组时，没有对应配置的instace将使用默认配置。
# @type InstanceAdvancedSettingsOverrides: Array
# @param ImageId: 节点镜像（节点选项时，该参数是必传参数）
# @type ImageId: String
attr_accessor :ClusterId, :InstanceIds, :InstanceAdvancedSettings, :EnhancedService, :LoginSettings, :HostName, :SecurityGroupIds, :NodePool, :SkipValidateOptions, :InstanceAdvancedSettingsOverrides, :ImageId
def initialize(clusterid=nil, instanceids=nil, instanceadvancedsettings=nil, enhancedservice=nil, loginsettings=nil, hostname=nil, securitygroupids=nil, nodepool=nil, skipvalidateoptions=nil, instanceadvancedsettingsoverrides=nil, imageid=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@InstanceAdvancedSettings = instanceadvancedsettings
@EnhancedService = enhancedservice
@LoginSettings = loginsettings
@HostName = hostname
@SecurityGroupIds = securitygroupids
@NodePool = nodepool
@SkipValidateOptions = skipvalidateoptions
@InstanceAdvancedSettingsOverrides = instanceadvancedsettingsoverrides
@ImageId = imageid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
unless params['EnhancedService'].nil?
@EnhancedService = EnhancedService.new
@EnhancedService.deserialize(params['EnhancedService'])
end
unless params['LoginSettings'].nil?
@LoginSettings = LoginSettings.new
@LoginSettings.deserialize(params['LoginSettings'])
end
@HostName = params['HostName']
@SecurityGroupIds = params['SecurityGroupIds']
unless params['NodePool'].nil?
@NodePool = NodePoolOption.new
@NodePool.deserialize(params['NodePool'])
end
@SkipValidateOptions = params['SkipValidateOptions']
unless params['InstanceAdvancedSettingsOverrides'].nil?
@InstanceAdvancedSettingsOverrides = []
params['InstanceAdvancedSettingsOverrides'].each do |i|
instanceadvancedsettings_tmp = InstanceAdvancedSettings.new
instanceadvancedsettings_tmp.deserialize(i)
@InstanceAdvancedSettingsOverrides << instanceadvancedsettings_tmp
end
end
@ImageId = params['ImageId']
end
end
# AddExistedInstances返回参数结构体
class AddExistedInstancesResponse < TencentCloud::Common::AbstractModel
# @param FailedInstanceIds: 失败的节点ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedInstanceIds: Array
# @param SuccInstanceIds: 成功的节点ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SuccInstanceIds: Array
# @param TimeoutInstanceIds: 超时未返回出来节点的ID(可能失败，也可能成功)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeoutInstanceIds: Array
# @param FailedReasons: 失败的节点的失败原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedReasons: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FailedInstanceIds, :SuccInstanceIds, :TimeoutInstanceIds, :FailedReasons, :RequestId
def initialize(failedinstanceids=nil, succinstanceids=nil, timeoutinstanceids=nil, failedreasons=nil, requestid=nil)
@FailedInstanceIds = failedinstanceids
@SuccInstanceIds = succinstanceids
@TimeoutInstanceIds = timeoutinstanceids
@FailedReasons = failedreasons
@RequestId = requestid
end
def deserialize(params)
@FailedInstanceIds = params['FailedInstanceIds']
@SuccInstanceIds = params['SuccInstanceIds']
@TimeoutInstanceIds = params['TimeoutInstanceIds']
@FailedReasons = params['FailedReasons']
@RequestId = params['RequestId']
end
end
# AddNodeToNodePool请求参数结构体
class AddNodeToNodePoolRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param InstanceIds: 节点id
# @type InstanceIds: Array
attr_accessor :ClusterId, :NodePoolId, :InstanceIds
def initialize(clusterid=nil, nodepoolid=nil, instanceids=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@InstanceIds = instanceids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@InstanceIds = params['InstanceIds']
end
end
# AddNodeToNodePool返回参数结构体
class AddNodeToNodePoolResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddVpcCniSubnets请求参数结构体
class AddVpcCniSubnetsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SubnetIds: 为集群容器网络增加的子网列表
# @type SubnetIds: Array
# @param VpcId: 集群所属的VPC的ID
# @type VpcId: String
attr_accessor :ClusterId, :SubnetIds, :VpcId
def initialize(clusterid=nil, subnetids=nil, vpcid=nil)
@ClusterId = clusterid
@SubnetIds = subnetids
@VpcId = vpcid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SubnetIds = params['SubnetIds']
@VpcId = params['VpcId']
end
end
# AddVpcCniSubnets返回参数结构体
class AddVpcCniSubnetsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# app所支持的chart
class AppChart < TencentCloud::Common::AbstractModel
# @param Name: chart名称
# @type Name: String
# @param Label: chart的标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Label: String
# @param LatestVersion: chart的版本
# @type LatestVersion: String
attr_accessor :Name, :Label, :LatestVersion
def initialize(name=nil, label=nil, latestversion=nil)
@Name = name
@Label = label
@LatestVersion = latestversion
end
def deserialize(params)
@Name = params['Name']
@Label = params['Label']
@LatestVersion = params['LatestVersion']
end
end
# 集群关联的伸缩组最大实例数最小值实例数
class AutoScalingGroupRange < TencentCloud::Common::AbstractModel
# @param MinSize: 伸缩组最小实例数
# @type MinSize: Integer
# @param MaxSize: 伸缩组最大实例数
# @type MaxSize: Integer
attr_accessor :MinSize, :MaxSize
def initialize(minsize=nil, maxsize=nil)
@MinSize = minsize
@MaxSize = maxsize
end
def deserialize(params)
@MinSize = params['MinSize']
@MaxSize = params['MaxSize']
end
end
# 自动变配集群等级
class AutoUpgradeClusterLevel < TencentCloud::Common::AbstractModel
# @param IsAutoUpgrade: 是否开启自动变配集群等级
# @type IsAutoUpgrade: Boolean
attr_accessor :IsAutoUpgrade
def initialize(isautoupgrade=nil)
@IsAutoUpgrade = isautoupgrade
end
def deserialize(params)
@IsAutoUpgrade = params['IsAutoUpgrade']
end
end
# 自动扩所容的节点
class AutoscalingAdded < TencentCloud::Common::AbstractModel
# @param Joining: 正在加入中的节点数量
# @type Joining: Integer
# @param Initializing: 初始化中的节点数量
# @type Initializing: Integer
# @param Normal: 正常的节点数量
# @type Normal: Integer
# @param Total: 节点总数
# @type Total: Integer
attr_accessor :Joining, :Initializing, :Normal, :Total
def initialize(joining=nil, initializing=nil, normal=nil, total=nil)
@Joining = joining
@Initializing = initializing
@Normal = normal
@Total = total
end
def deserialize(params)
@Joining = params['Joining']
@Initializing = params['Initializing']
@Normal = params['Normal']
@Total = params['Total']
end
end
# cloudrun安全特性能力
class Capabilities < TencentCloud::Common::AbstractModel
# @param Add: 启用安全能力项列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Add: Array
# @param Drop: 禁用安全能力向列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Drop: Array
attr_accessor :Add, :Drop
def initialize(add=nil, drop=nil)
@Add = add
@Drop = drop
end
def deserialize(params)
@Add = params['Add']
@Drop = params['Drop']
end
end
# EKS Instnace CBS volume
class CbsVolume < TencentCloud::Common::AbstractModel
# @param Name: cbs volume 数据卷名称
# @type Name: String
# @param CbsDiskId: 腾讯云cbs盘Id
# @type CbsDiskId: String
attr_accessor :Name, :CbsDiskId
def initialize(name=nil, cbsdiskid=nil)
@Name = name
@CbsDiskId = cbsdiskid
end
def deserialize(params)
@Name = params['Name']
@CbsDiskId = params['CbsDiskId']
end
end
# CheckEdgeClusterCIDR请求参数结构体
class CheckEdgeClusterCIDRRequest < TencentCloud::Common::AbstractModel
# @param VpcId: 集群的vpc-id
# @type VpcId: String
# @param PodCIDR: 集群的pod CIDR
# @type PodCIDR: String
# @param ServiceCIDR: 集群的service CIDR
# @type ServiceCIDR: String
attr_accessor :VpcId, :PodCIDR, :ServiceCIDR
def initialize(vpcid=nil, podcidr=nil, servicecidr=nil)
@VpcId = vpcid
@PodCIDR = podcidr
@ServiceCIDR = servicecidr
end
def deserialize(params)
@VpcId = params['VpcId']
@PodCIDR = params['PodCIDR']
@ServiceCIDR = params['ServiceCIDR']
end
end
# CheckEdgeClusterCIDR返回参数结构体
class CheckEdgeClusterCIDRResponse < TencentCloud::Common::AbstractModel
# @param ConflictCode: 返回码，具体如下
# -1 内部错误
# 0 没冲突
# 1 vpc 和 serviceCIDR 冲突
# 2 vpc 和 podCIDR 冲突
# 3 serviceCIDR 和 podCIDR 冲突
# @type ConflictCode: Integer
# @param ConflictMsg: CIDR冲突描述信息。
# @type ConflictMsg: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ConflictCode, :ConflictMsg, :RequestId
def initialize(conflictcode=nil, conflictmsg=nil, requestid=nil)
@ConflictCode = conflictcode
@ConflictMsg = conflictmsg
@RequestId = requestid
end
def deserialize(params)
@ConflictCode = params['ConflictCode']
@ConflictMsg = params['ConflictMsg']
@RequestId = params['RequestId']
end
end
# CheckInstancesUpgradeAble请求参数结构体
class CheckInstancesUpgradeAbleRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 节点列表，空为全部节点
# @type InstanceIds: Array
# @param UpgradeType: 升级类型
# @type UpgradeType: String
# @param Offset: 分页Offset
# @type Offset: Integer
# @param Limit: 分页Limit
# @type Limit: Integer
# @param Filter: 过滤
# @type Filter: Array
attr_accessor :ClusterId, :InstanceIds, :UpgradeType, :Offset, :Limit, :Filter
def initialize(clusterid=nil, instanceids=nil, upgradetype=nil, offset=nil, limit=nil, filter=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@UpgradeType = upgradetype
@Offset = offset
@Limit = limit
@Filter = filter
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
@UpgradeType = params['UpgradeType']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filter'].nil?
@Filter = []
params['Filter'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filter << filter_tmp
end
end
end
end
# CheckInstancesUpgradeAble返回参数结构体
class CheckInstancesUpgradeAbleResponse < TencentCloud::Common::AbstractModel
# @param ClusterVersion: 集群master当前小版本
# @type ClusterVersion: String
# @param LatestVersion: 集群master对应的大版本目前最新小版本
# @type LatestVersion: String
# @param UpgradeAbleInstances: 可升级节点列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpgradeAbleInstances: Array
# @param Total: 总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterVersion, :LatestVersion, :UpgradeAbleInstances, :Total, :RequestId
def initialize(clusterversion=nil, latestversion=nil, upgradeableinstances=nil, total=nil, requestid=nil)
@ClusterVersion = clusterversion
@LatestVersion = latestversion
@UpgradeAbleInstances = upgradeableinstances
@Total = total
@RequestId = requestid
end
def deserialize(params)
@ClusterVersion = params['ClusterVersion']
@LatestVersion = params['LatestVersion']
unless params['UpgradeAbleInstances'].nil?
@UpgradeAbleInstances = []
params['UpgradeAbleInstances'].each do |i|
upgradeableinstancesitem_tmp = UpgradeAbleInstancesItem.new
upgradeableinstancesitem_tmp.deserialize(i)
@UpgradeAbleInstances << upgradeableinstancesitem_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# 集群信息结构体
class Cluster < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param ClusterDescription: 集群描述
# @type ClusterDescription: String
# @param ClusterVersion: 集群版本（默认值为1.10.5）
# @type ClusterVersion: String
# @param ClusterOs: 集群系统。centos7.2x86_64 或者 ubuntu16.04.1 LTSx86_64，默认取值为ubuntu16.04.1 LTSx86_64
# @type ClusterOs: String
# @param ClusterType: 集群类型，托管集群：MANAGED_CLUSTER，独立集群：INDEPENDENT_CLUSTER。
# @type ClusterType: String
# @param ClusterNetworkSettings: 集群网络相关参数
# @type ClusterNetworkSettings: :class:`Tencentcloud::Tke.v20180525.models.ClusterNetworkSettings`
# @param ClusterNodeNum: 集群当前node数量
# @type ClusterNodeNum: Integer
# @param ProjectId: 集群所属的项目ID
# @type ProjectId: Integer
# @param TagSpecification: 标签描述列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagSpecification: Array
# @param ClusterStatus: 集群状态 (Running 运行中 Creating 创建中 Idling 闲置中 Abnormal 异常 )
# @type ClusterStatus: String
# @param Property: 集群属性(包括集群不同属性的MAP，属性字段包括NodeNameType (lan-ip模式和hostname 模式，默认无lan-ip模式))
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Property: String
# @param ClusterMaterNodeNum: 集群当前master数量
# @type ClusterMaterNodeNum: Integer
# @param ImageId: 集群使用镜像id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param OsCustomizeType: OsCustomizeType 系统定制类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsCustomizeType: String
# @param ContainerRuntime: 集群运行环境docker或container
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerRuntime: String
# @param CreatedTime: 创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param DeletionProtection: 删除保护开关
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeletionProtection: Boolean
# @param EnableExternalNode: 集群是否开启第三方节点支持
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableExternalNode: Boolean
# @param ClusterLevel: 集群等级，针对托管集群生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterLevel: String
# @param AutoUpgradeClusterLevel: 自动变配集群等级，针对托管集群生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoUpgradeClusterLevel: Boolean
attr_accessor :ClusterId, :ClusterName, :ClusterDescription, :ClusterVersion, :ClusterOs, :ClusterType, :ClusterNetworkSettings, :ClusterNodeNum, :ProjectId, :TagSpecification, :ClusterStatus, :Property, :ClusterMaterNodeNum, :ImageId, :OsCustomizeType, :ContainerRuntime, :CreatedTime, :DeletionProtection, :EnableExternalNode, :ClusterLevel, :AutoUpgradeClusterLevel
def initialize(clusterid=nil, clustername=nil, clusterdescription=nil, clusterversion=nil, clusteros=nil, clustertype=nil, clusternetworksettings=nil, clusternodenum=nil, projectid=nil, tagspecification=nil, clusterstatus=nil, property=nil, clustermaternodenum=nil, imageid=nil, oscustomizetype=nil, containerruntime=nil, createdtime=nil, deletionprotection=nil, enableexternalnode=nil, clusterlevel=nil, autoupgradeclusterlevel=nil)
@ClusterId = clusterid
@ClusterName = clustername
@ClusterDescription = clusterdescription
@ClusterVersion = clusterversion
@ClusterOs = clusteros
@ClusterType = clustertype
@ClusterNetworkSettings = clusternetworksettings
@ClusterNodeNum = clusternodenum
@ProjectId = projectid
@TagSpecification = tagspecification
@ClusterStatus = clusterstatus
@Property = property
@ClusterMaterNodeNum = clustermaternodenum
@ImageId = imageid
@OsCustomizeType = oscustomizetype
@ContainerRuntime = containerruntime
@CreatedTime = createdtime
@DeletionProtection = deletionprotection
@EnableExternalNode = enableexternalnode
@ClusterLevel = clusterlevel
@AutoUpgradeClusterLevel = autoupgradeclusterlevel
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterDescription = params['ClusterDescription']
@ClusterVersion = params['ClusterVersion']
@ClusterOs = params['ClusterOs']
@ClusterType = params['ClusterType']
unless params['ClusterNetworkSettings'].nil?
@ClusterNetworkSettings = ClusterNetworkSettings.new
@ClusterNetworkSettings.deserialize(params['ClusterNetworkSettings'])
end
@ClusterNodeNum = params['ClusterNodeNum']
@ProjectId = params['ProjectId']
unless params['TagSpecification'].nil?
@TagSpecification = []
params['TagSpecification'].each do |i|
tagspecification_tmp = TagSpecification.new
tagspecification_tmp.deserialize(i)
@TagSpecification << tagspecification_tmp
end
end
@ClusterStatus = params['ClusterStatus']
@Property = params['Property']
@ClusterMaterNodeNum = params['ClusterMaterNodeNum']
@ImageId = params['ImageId']
@OsCustomizeType = params['OsCustomizeType']
@ContainerRuntime = params['ContainerRuntime']
@CreatedTime = params['CreatedTime']
@DeletionProtection = params['DeletionProtection']
@EnableExternalNode = params['EnableExternalNode']
@ClusterLevel = params['ClusterLevel']
@AutoUpgradeClusterLevel = params['AutoUpgradeClusterLevel']
end
end
# 集群高级配置
class ClusterAdvancedSettings < TencentCloud::Common::AbstractModel
# @param IPVS: 是否启用IPVS
# @type IPVS: Boolean
# @param AsEnabled: 是否启用集群节点自动扩缩容(创建集群流程不支持开启此功能)
# @type AsEnabled: Boolean
# @param ContainerRuntime: 集群使用的runtime类型，包括"docker"和"containerd"两种类型，默认为"docker"
# @type ContainerRuntime: String
# @param NodeNameType: 集群中节点NodeName类型（包括 hostname,lan-ip两种形式，默认为lan-ip。如果开启了hostname模式，创建节点时需要设置HostName参数，并且InstanceName需要和HostName一致）
# @type NodeNameType: String
# @param ExtraArgs: 集群自定义参数
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.ClusterExtraArgs`
# @param NetworkType: 集群网络类型（包括GR(全局路由)和VPC-CNI两种模式，默认为GR。
# @type NetworkType: String
# @param IsNonStaticIpMode: 集群VPC-CNI模式是否为非固定IP，默认: FALSE 固定IP。
# @type IsNonStaticIpMode: Boolean
# @param DeletionProtection: 是否启用集群删除保护
# @type DeletionProtection: Boolean
# @param KubeProxyMode: 集群的网络代理模型，目前tke集群支持的网络代理模式有三种：iptables,ipvs,ipvs-bpf，此参数仅在使用ipvs-bpf模式时使用，三种网络模式的参数设置关系如下：
# iptables模式：IPVS和KubeProxyMode都不设置
# ipvs模式: 设置IPVS为true, KubeProxyMode不设置
# ipvs-bpf模式: 设置KubeProxyMode为kube-proxy-bpf
# 使用ipvs-bpf的网络模式需要满足以下条件：
# 1. 集群版本必须为1.14及以上；
# 2. 系统镜像必须是: Tencent Linux 2.4；
# @type KubeProxyMode: String
# @param AuditEnabled: 是否开启审计开关
# @type AuditEnabled: Boolean
# @param AuditLogsetId: 审计日志上传到的logset日志集
# @type AuditLogsetId: String
# @param AuditLogTopicId: 审计日志上传到的topic
# @type AuditLogTopicId: String
# @param VpcCniType: 区分共享网卡多IP模式和独立网卡模式，共享网卡多 IP 模式填写"tke-route-eni"，独立网卡模式填写"tke-direct-eni"，默认为共享网卡模式
# @type VpcCniType: String
# @param RuntimeVersion: 运行时版本
# @type RuntimeVersion: String
# @param EnableCustomizedPodCIDR: 是否开节点podCIDR大小的自定义模式
# @type EnableCustomizedPodCIDR: Boolean
# @param BasePodNumber: 自定义模式下的基础pod数量
# @type BasePodNumber: Integer
# @param CiliumMode: 启用 CiliumMode 的模式，空值表示不启用，“clusterIP” 表示启用 Cilium 支持 ClusterIP
# @type CiliumMode: String
attr_accessor :IPVS, :AsEnabled, :ContainerRuntime, :NodeNameType, :ExtraArgs, :NetworkType, :IsNonStaticIpMode, :DeletionProtection, :KubeProxyMode, :AuditEnabled, :AuditLogsetId, :AuditLogTopicId, :VpcCniType, :RuntimeVersion, :EnableCustomizedPodCIDR, :BasePodNumber, :CiliumMode
def initialize(ipvs=nil, asenabled=nil, containerruntime=nil, nodenametype=nil, extraargs=nil, networktype=nil, isnonstaticipmode=nil, deletionprotection=nil, kubeproxymode=nil, auditenabled=nil, auditlogsetid=nil, auditlogtopicid=nil, vpccnitype=nil, runtimeversion=nil, enablecustomizedpodcidr=nil, basepodnumber=nil, ciliummode=nil)
@IPVS = ipvs
@AsEnabled = asenabled
@ContainerRuntime = containerruntime
@NodeNameType = nodenametype
@ExtraArgs = extraargs
@NetworkType = networktype
@IsNonStaticIpMode = isnonstaticipmode
@DeletionProtection = deletionprotection
@KubeProxyMode = kubeproxymode
@AuditEnabled = auditenabled
@AuditLogsetId = auditlogsetid
@AuditLogTopicId = auditlogtopicid
@VpcCniType = vpccnitype
@RuntimeVersion = runtimeversion
@EnableCustomizedPodCIDR = enablecustomizedpodcidr
@BasePodNumber = basepodnumber
@CiliumMode = ciliummode
end
def deserialize(params)
@IPVS = params['IPVS']
@AsEnabled = params['AsEnabled']
@ContainerRuntime = params['ContainerRuntime']
@NodeNameType = params['NodeNameType']
unless params['ExtraArgs'].nil?
@ExtraArgs = ClusterExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
@NetworkType = params['NetworkType']
@IsNonStaticIpMode = params['IsNonStaticIpMode']
@DeletionProtection = params['DeletionProtection']
@KubeProxyMode = params['KubeProxyMode']
@AuditEnabled = params['AuditEnabled']
@AuditLogsetId = params['AuditLogsetId']
@AuditLogTopicId = params['AuditLogTopicId']
@VpcCniType = params['VpcCniType']
@RuntimeVersion = params['RuntimeVersion']
@EnableCustomizedPodCIDR = params['EnableCustomizedPodCIDR']
@BasePodNumber = params['BasePodNumber']
@CiliumMode = params['CiliumMode']
end
end
# 集群关联的伸缩组信息
class ClusterAsGroup < TencentCloud::Common::AbstractModel
# @param AutoScalingGroupId: 伸缩组ID
# @type AutoScalingGroupId: String
# @param Status: 伸缩组状态(开启 enabled 开启中 enabling 关闭 disabled 关闭中 disabling 更新中 updating 删除中 deleting 开启缩容中 scaleDownEnabling 关闭缩容中 scaleDownDisabling)
# @type Status: String
# @param IsUnschedulable: 节点是否设置成不可调度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsUnschedulable: Boolean
# @param Labels: 伸缩组的label列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Labels: Array
# @param CreatedTime: 创建时间
# @type CreatedTime: String
attr_accessor :AutoScalingGroupId, :Status, :IsUnschedulable, :Labels, :CreatedTime
def initialize(autoscalinggroupid=nil, status=nil, isunschedulable=nil, labels=nil, createdtime=nil)
@AutoScalingGroupId = autoscalinggroupid
@Status = status
@IsUnschedulable = isunschedulable
@Labels = labels
@CreatedTime = createdtime
end
def deserialize(params)
@AutoScalingGroupId = params['AutoScalingGroupId']
@Status = params['Status']
@IsUnschedulable = params['IsUnschedulable']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
@CreatedTime = params['CreatedTime']
end
end
# 集群伸缩组属性
class ClusterAsGroupAttribute < TencentCloud::Common::AbstractModel
# @param AutoScalingGroupId: 伸缩组ID
# @type AutoScalingGroupId: String
# @param AutoScalingGroupEnabled: 是否开启
# @type AutoScalingGroupEnabled: Boolean
# @param AutoScalingGroupRange: 伸缩组最大最小实例数
# @type AutoScalingGroupRange: :class:`Tencentcloud::Tke.v20180525.models.AutoScalingGroupRange`
attr_accessor :AutoScalingGroupId, :AutoScalingGroupEnabled, :AutoScalingGroupRange
def initialize(autoscalinggroupid=nil, autoscalinggroupenabled=nil, autoscalinggrouprange=nil)
@AutoScalingGroupId = autoscalinggroupid
@AutoScalingGroupEnabled = autoscalinggroupenabled
@AutoScalingGroupRange = autoscalinggrouprange
end
def deserialize(params)
@AutoScalingGroupId = params['AutoScalingGroupId']
@AutoScalingGroupEnabled = params['AutoScalingGroupEnabled']
unless params['AutoScalingGroupRange'].nil?
@AutoScalingGroupRange = AutoScalingGroupRange.new
@AutoScalingGroupRange.deserialize(params['AutoScalingGroupRange'])
end
end
end
# 集群弹性伸缩配置
class ClusterAsGroupOption < TencentCloud::Common::AbstractModel
# @param IsScaleDownEnabled: 是否开启缩容
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsScaleDownEnabled: Boolean
# @param Expander: 多伸缩组情况下扩容选择算法(random 随机选择，most-pods 最多类型的Pod least-waste 最少的资源浪费，默认为random)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Expander: String
# @param MaxEmptyBulkDelete: 最大并发缩容数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxEmptyBulkDelete: Integer
# @param ScaleDownDelay: 集群扩容后多少分钟开始判断缩容（默认为10分钟）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScaleDownDelay: Integer
# @param ScaleDownUnneededTime: 节点连续空闲多少分钟后被缩容（默认为 10分钟）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScaleDownUnneededTime: Integer
# @param ScaleDownUtilizationThreshold: 节点资源使用量低于多少(百分比)时认为空闲(默认: 50(百分比))
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScaleDownUtilizationThreshold: Integer
# @param SkipNodesWithLocalStorage: 含有本地存储Pod的节点是否不缩容(默认： FALSE)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SkipNodesWithLocalStorage: Boolean
# @param SkipNodesWithSystemPods: 含有kube-system namespace下非DaemonSet管理的Pod的节点是否不缩容 (默认： FALSE)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SkipNodesWithSystemPods: Boolean
# @param IgnoreDaemonSetsUtilization: 计算资源使用量时是否默认忽略DaemonSet的实例(默认值: False，不忽略)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IgnoreDaemonSetsUtilization: Boolean
# @param OkTotalUnreadyCount: CA做健康性判断的个数，默认3，即超过OkTotalUnreadyCount个数后，CA会进行健康性判断。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OkTotalUnreadyCount: Integer
# @param MaxTotalUnreadyPercentage: 未就绪节点的最大百分比，此后CA会停止操作
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxTotalUnreadyPercentage: Integer
# @param ScaleDownUnreadyTime: 表示未准备就绪的节点在有资格进行缩减之前应该停留多长时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScaleDownUnreadyTime: Integer
# @param UnregisteredNodeRemovalTime: CA删除未在Kubernetes中注册的节点之前等待的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnregisteredNodeRemovalTime: Integer
attr_accessor :IsScaleDownEnabled, :Expander, :MaxEmptyBulkDelete, :ScaleDownDelay, :ScaleDownUnneededTime, :ScaleDownUtilizationThreshold, :SkipNodesWithLocalStorage, :SkipNodesWithSystemPods, :IgnoreDaemonSetsUtilization, :OkTotalUnreadyCount, :MaxTotalUnreadyPercentage, :ScaleDownUnreadyTime, :UnregisteredNodeRemovalTime
def initialize(isscaledownenabled=nil, expander=nil, maxemptybulkdelete=nil, scaledowndelay=nil, scaledownunneededtime=nil, scaledownutilizationthreshold=nil, skipnodeswithlocalstorage=nil, skipnodeswithsystempods=nil, ignoredaemonsetsutilization=nil, oktotalunreadycount=nil, maxtotalunreadypercentage=nil, scaledownunreadytime=nil, unregisterednoderemovaltime=nil)
@IsScaleDownEnabled = isscaledownenabled
@Expander = expander
@MaxEmptyBulkDelete = maxemptybulkdelete
@ScaleDownDelay = scaledowndelay
@ScaleDownUnneededTime = scaledownunneededtime
@ScaleDownUtilizationThreshold = scaledownutilizationthreshold
@SkipNodesWithLocalStorage = skipnodeswithlocalstorage
@SkipNodesWithSystemPods = skipnodeswithsystempods
@IgnoreDaemonSetsUtilization = ignoredaemonsetsutilization
@OkTotalUnreadyCount = oktotalunreadycount
@MaxTotalUnreadyPercentage = maxtotalunreadypercentage
@ScaleDownUnreadyTime = scaledownunreadytime
@UnregisteredNodeRemovalTime = unregisterednoderemovaltime
end
def deserialize(params)
@IsScaleDownEnabled = params['IsScaleDownEnabled']
@Expander = params['Expander']
@MaxEmptyBulkDelete = params['MaxEmptyBulkDelete']
@ScaleDownDelay = params['ScaleDownDelay']
@ScaleDownUnneededTime = params['ScaleDownUnneededTime']
@ScaleDownUtilizationThreshold = params['ScaleDownUtilizationThreshold']
@SkipNodesWithLocalStorage = params['SkipNodesWithLocalStorage']
@SkipNodesWithSystemPods = params['SkipNodesWithSystemPods']
@IgnoreDaemonSetsUtilization = params['IgnoreDaemonSetsUtilization']
@OkTotalUnreadyCount = params['OkTotalUnreadyCount']
@MaxTotalUnreadyPercentage = params['MaxTotalUnreadyPercentage']
@ScaleDownUnreadyTime = params['ScaleDownUnreadyTime']
@UnregisteredNodeRemovalTime = params['UnregisteredNodeRemovalTime']
end
end
# 描述集群的基本配置信息
class ClusterBasicSettings < TencentCloud::Common::AbstractModel
# @param ClusterOs: 集群操作系统，支持设置公共镜像(字段传相应镜像ID)和自定义镜像(字段传相应镜像Name)，详情参考：https://cloud.tencent.com/document/product/457/68289
# @type ClusterOs: String
# @param ClusterVersion: 集群版本,默认值为1.10.5
# @type ClusterVersion: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param ClusterDescription: 集群描述
# @type ClusterDescription: String
# @param VpcId: 私有网络ID，形如vpc-xxx。创建托管空集群时必传。
# @type VpcId: String
# @param ProjectId: 集群内新增资源所属项目ID。
# @type ProjectId: Integer
# @param TagSpecification: 标签描述列表。通过指定该参数可以同时绑定标签到相应的资源实例，当前仅支持绑定标签到集群实例。
# @type TagSpecification: Array
# @param OsCustomizeType: 容器的镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# @type OsCustomizeType: String
# @param NeedWorkSecurityGroup: 是否开启节点的默认安全组(默认: 否，Alpha特性)
# @type NeedWorkSecurityGroup: Boolean
# @param SubnetId: 当选择Cilium Overlay网络插件时，TKE会从该子网获取2个IP用来创建内网负载均衡
# @type SubnetId: String
# @param ClusterLevel: 集群等级，针对托管集群生效
# @type ClusterLevel: String
# @param AutoUpgradeClusterLevel: 自动变配集群等级，针对托管集群生效
# @type AutoUpgradeClusterLevel: :class:`Tencentcloud::Tke.v20180525.models.AutoUpgradeClusterLevel`
attr_accessor :ClusterOs, :ClusterVersion, :ClusterName, :ClusterDescription, :VpcId, :ProjectId, :TagSpecification, :OsCustomizeType, :NeedWorkSecurityGroup, :SubnetId, :ClusterLevel, :AutoUpgradeClusterLevel
def initialize(clusteros=nil, clusterversion=nil, clustername=nil, clusterdescription=nil, vpcid=nil, projectid=nil, tagspecification=nil, oscustomizetype=nil, needworksecuritygroup=nil, subnetid=nil, clusterlevel=nil, autoupgradeclusterlevel=nil)
@ClusterOs = clusteros
@ClusterVersion = clusterversion
@ClusterName = clustername
@ClusterDescription = clusterdescription
@VpcId = vpcid
@ProjectId = projectid
@TagSpecification = tagspecification
@OsCustomizeType = oscustomizetype
@NeedWorkSecurityGroup = needworksecuritygroup
@SubnetId = subnetid
@ClusterLevel = clusterlevel
@AutoUpgradeClusterLevel = autoupgradeclusterlevel
end
def deserialize(params)
@ClusterOs = params['ClusterOs']
@ClusterVersion = params['ClusterVersion']
@ClusterName = params['ClusterName']
@ClusterDescription = params['ClusterDescription']
@VpcId = params['VpcId']
@ProjectId = params['ProjectId']
unless params['TagSpecification'].nil?
@TagSpecification = []
params['TagSpecification'].each do |i|
tagspecification_tmp = TagSpecification.new
tagspecification_tmp.deserialize(i)
@TagSpecification << tagspecification_tmp
end
end
@OsCustomizeType = params['OsCustomizeType']
@NeedWorkSecurityGroup = params['NeedWorkSecurityGroup']
@SubnetId = params['SubnetId']
@ClusterLevel = params['ClusterLevel']
unless params['AutoUpgradeClusterLevel'].nil?
@AutoUpgradeClusterLevel = AutoUpgradeClusterLevel.new
@AutoUpgradeClusterLevel.deserialize(params['AutoUpgradeClusterLevel'])
end
end
end
# 集群容器网络相关参数
class ClusterCIDRSettings < TencentCloud::Common::AbstractModel
# @param ClusterCIDR: 用于分配集群容器和服务 IP 的 CIDR，不得与 VPC CIDR 冲突，也不得与同 VPC 内其他集群 CIDR 冲突。且网段范围必须在内网网段内，例如:10.1.0.0/14, 192.168.0.1/18,172.16.0.0/16。
# @type ClusterCIDR: String
# @param IgnoreClusterCIDRConflict: 是否忽略 ClusterCIDR 冲突错误, 默认不忽略
# @type IgnoreClusterCIDRConflict: Boolean
# @param MaxNodePodNum: 集群中每个Node上最大的Pod数量。取值范围4～256。不为2的幂值时会向上取最接近的2的幂值。
# @type MaxNodePodNum: Integer
# @param MaxClusterServiceNum: 集群最大的service数量。取值范围32～32768，不为2的幂值时会向上取最接近的2的幂值。默认值256
# @type MaxClusterServiceNum: Integer
# @param ServiceCIDR: 用于分配集群服务 IP 的 CIDR，不得与 VPC CIDR 冲突，也不得与同 VPC 内其他集群 CIDR 冲突。且网段范围必须在内网网段内，例如:10.1.0.0/14, 192.168.0.1/18,172.16.0.0/16。
# @type ServiceCIDR: String
# @param EniSubnetIds: VPC-CNI网络模式下，弹性网卡的子网Id。
# @type EniSubnetIds: Array
# @param ClaimExpiredSeconds: VPC-CNI网络模式下，弹性网卡IP的回收时间，取值范围[300,15768000)
# @type ClaimExpiredSeconds: Integer
# @param IgnoreServiceCIDRConflict: 是否忽略 ServiceCIDR 冲突错误, 仅在 VPC-CNI 模式生效，默认不忽略
# @type IgnoreServiceCIDRConflict: Boolean
attr_accessor :ClusterCIDR, :IgnoreClusterCIDRConflict, :MaxNodePodNum, :MaxClusterServiceNum, :ServiceCIDR, :EniSubnetIds, :ClaimExpiredSeconds, :IgnoreServiceCIDRConflict
def initialize(clustercidr=nil, ignoreclustercidrconflict=nil, maxnodepodnum=nil, maxclusterservicenum=nil, servicecidr=nil, enisubnetids=nil, claimexpiredseconds=nil, ignoreservicecidrconflict=nil)
@ClusterCIDR = clustercidr
@IgnoreClusterCIDRConflict = ignoreclustercidrconflict
@MaxNodePodNum = maxnodepodnum
@MaxClusterServiceNum = maxclusterservicenum
@ServiceCIDR = servicecidr
@EniSubnetIds = enisubnetids
@ClaimExpiredSeconds = claimexpiredseconds
@IgnoreServiceCIDRConflict = ignoreservicecidrconflict
end
def deserialize(params)
@ClusterCIDR = params['ClusterCIDR']
@IgnoreClusterCIDRConflict = params['IgnoreClusterCIDRConflict']
@MaxNodePodNum = params['MaxNodePodNum']
@MaxClusterServiceNum = params['MaxClusterServiceNum']
@ServiceCIDR = params['ServiceCIDR']
@EniSubnetIds = params['EniSubnetIds']
@ClaimExpiredSeconds = params['ClaimExpiredSeconds']
@IgnoreServiceCIDRConflict = params['IgnoreServiceCIDRConflict']
end
end
# 集群创建过程
class ClusterCondition < TencentCloud::Common::AbstractModel
# @param Type: 集群创建过程类型
# @type Type: String
# @param Status: 集群创建过程状态
# @type Status: String
# @param LastProbeTime: 最后一次探测到该状态的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastProbeTime: String
# @param LastTransitionTime: 最后一次转换到该过程的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastTransitionTime: String
# @param Reason: 转换到该过程的简明原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Reason: String
# @param Message: 转换到该过程的更多信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Message: String
attr_accessor :Type, :Status, :LastProbeTime, :LastTransitionTime, :Reason, :Message
def initialize(type=nil, status=nil, lastprobetime=nil, lasttransitiontime=nil, reason=nil, message=nil)
@Type = type
@Status = status
@LastProbeTime = lastprobetime
@LastTransitionTime = lasttransitiontime
@Reason = reason
@Message = message
end
def deserialize(params)
@Type = params['Type']
@Status = params['Status']
@LastProbeTime = params['LastProbeTime']
@LastTransitionTime = params['LastTransitionTime']
@Reason = params['Reason']
@Message = params['Message']
end
end
# 接入k8s 的认证信息
class ClusterCredential < TencentCloud::Common::AbstractModel
# @param CACert: CA 根证书
# @type CACert: String
# @param Token: 认证用的Token
# @type Token: String
attr_accessor :CACert, :Token
def initialize(cacert=nil, token=nil)
@CACert = cacert
@Token = token
end
def deserialize(params)
@CACert = params['CACert']
@Token = params['Token']
end
end
# 集群master自定义参数
class ClusterExtraArgs < TencentCloud::Common::AbstractModel
# @param KubeAPIServer: kube-apiserver自定义参数，参数格式为["k1=v1", "k1=v2"]， 例如["max-requests-inflight=500","feature-gates=PodShareProcessNamespace=true,DynamicKubeletConfig=true"]
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeAPIServer: Array
# @param KubeControllerManager: kube-controller-manager自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeControllerManager: Array
# @param KubeScheduler: kube-scheduler自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeScheduler: Array
# @param Etcd: etcd自定义参数，只支持独立集群
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Etcd: Array
attr_accessor :KubeAPIServer, :KubeControllerManager, :KubeScheduler, :Etcd
def initialize(kubeapiserver=nil, kubecontrollermanager=nil, kubescheduler=nil, etcd=nil)
@KubeAPIServer = kubeapiserver
@KubeControllerManager = kubecontrollermanager
@KubeScheduler = kubescheduler
@Etcd = etcd
end
def deserialize(params)
@KubeAPIServer = params['KubeAPIServer']
@KubeControllerManager = params['KubeControllerManager']
@KubeScheduler = params['KubeScheduler']
@Etcd = params['Etcd']
end
end
# 弹性容器集群内网访问LB信息
class ClusterInternalLB < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启内网访问LB
# @type Enabled: Boolean
# @param SubnetId: 内网访问LB关联的子网Id
# @type SubnetId: String
attr_accessor :Enabled, :SubnetId
def initialize(enabled=nil, subnetid=nil)
@Enabled = enabled
@SubnetId = subnetid
end
def deserialize(params)
@Enabled = params['Enabled']
@SubnetId = params['SubnetId']
end
end
# 托管集群等级属性
class ClusterLevelAttribute < TencentCloud::Common::AbstractModel
# @param Name: 集群等级
# @type Name: String
# @param Alias: 等级名称
# @type Alias: String
# @param NodeCount: 节点数量
# @type NodeCount: Integer
# @param PodCount: Pod数量
# @type PodCount: Integer
# @param ConfigMapCount: Configmap数量
# @type ConfigMapCount: Integer
# @param CRDCount: CRD数量
# @type CRDCount: Integer
# @param Enable: 是否启用
# @type Enable: Boolean
# @param OtherCount: 其他资源数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OtherCount: Integer
attr_accessor :Name, :Alias, :NodeCount, :PodCount, :ConfigMapCount, :CRDCount, :Enable, :OtherCount
def initialize(name=nil, _alias=nil, nodecount=nil, podcount=nil, configmapcount=nil, crdcount=nil, enable=nil, othercount=nil)
@Name = name
@Alias = _alias
@NodeCount = nodecount
@PodCount = podcount
@ConfigMapCount = configmapcount
@CRDCount = crdcount
@Enable = enable
@OtherCount = othercount
end
def deserialize(params)
@Name = params['Name']
@Alias = params['Alias']
@NodeCount = params['NodeCount']
@PodCount = params['PodCount']
@ConfigMapCount = params['ConfigMapCount']
@CRDCount = params['CRDCount']
@Enable = params['Enable']
@OtherCount = params['OtherCount']
end
end
# 集群等级变配记录
class ClusterLevelChangeRecord < TencentCloud::Common::AbstractModel
# @param ID: 记录ID
# @type ID: String
# @param ClusterID: 集群ID
# @type ClusterID: String
# @param Status: 变配状态：trading 发货中,upgrading 变配中,success 变配成功,failed 变配失败。
# @type Status: String
# @param Message: 状态描述
# @type Message: String
# @param OldLevel: 变配前规模
# @type OldLevel: String
# @param NewLevel: 变配后规模
# @type NewLevel: String
# @param TriggerType: 变配触发类型：manual 手动,auto 自动
# @type TriggerType: String
# @param StartedAt: 开始时间
# @type StartedAt: String
# @param EndedAt: 结束时间
# @type EndedAt: String
attr_accessor :ID, :ClusterID, :Status, :Message, :OldLevel, :NewLevel, :TriggerType, :StartedAt, :EndedAt
def initialize(id=nil, clusterid=nil, status=nil, message=nil, oldlevel=nil, newlevel=nil, triggertype=nil, startedat=nil, endedat=nil)
@ID = id
@ClusterID = clusterid
@Status = status
@Message = message
@OldLevel = oldlevel
@NewLevel = newlevel
@TriggerType = triggertype
@StartedAt = startedat
@EndedAt = endedat
end
def deserialize(params)
@ID = params['ID']
@ClusterID = params['ClusterID']
@Status = params['Status']
@Message = params['Message']
@OldLevel = params['OldLevel']
@NewLevel = params['NewLevel']
@TriggerType = params['TriggerType']
@StartedAt = params['StartedAt']
@EndedAt = params['EndedAt']
end
end
# 集群网络相关的参数
class ClusterNetworkSettings < TencentCloud::Common::AbstractModel
# @param ClusterCIDR: 用于分配集群容器和服务 IP 的 CIDR，不得与 VPC CIDR 冲突，也不得与同 VPC 内其他集群 CIDR 冲突
# @type ClusterCIDR: String
# @param IgnoreClusterCIDRConflict: 是否忽略 ClusterCIDR 冲突错误, 默认不忽略
# @type IgnoreClusterCIDRConflict: Boolean
# @param MaxNodePodNum: 集群中每个Node上最大的Pod数量(默认为256)
# @type MaxNodePodNum: Integer
# @param MaxClusterServiceNum: 集群最大的service数量(默认为256)
# @type MaxClusterServiceNum: Integer
# @param Ipvs: 是否启用IPVS(默认不开启)
# @type Ipvs: Boolean
# @param VpcId: 集群的VPCID（如果创建空集群，为必传值，否则自动设置为和集群的节点保持一致）
# @type VpcId: String
# @param Cni: 网络插件是否启用CNI(默认开启)
# @type Cni: Boolean
# @param KubeProxyMode: service的网络模式，当前参数只适用于ipvs+bpf模式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeProxyMode: String
# @param ServiceCIDR: 用于分配service的IP range，不得与 VPC CIDR 冲突，也不得与同 VPC 内其他集群 CIDR 冲突
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceCIDR: String
# @param Subnets: 集群关联的容器子网
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Subnets: Array
# @param IgnoreServiceCIDRConflict: 是否忽略 ServiceCIDR 冲突错误, 仅在 VPC-CNI 模式生效，默认不忽略
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IgnoreServiceCIDRConflict: Boolean
attr_accessor :ClusterCIDR, :IgnoreClusterCIDRConflict, :MaxNodePodNum, :MaxClusterServiceNum, :Ipvs, :VpcId, :Cni, :KubeProxyMode, :ServiceCIDR, :Subnets, :IgnoreServiceCIDRConflict
def initialize(clustercidr=nil, ignoreclustercidrconflict=nil, maxnodepodnum=nil, maxclusterservicenum=nil, ipvs=nil, vpcid=nil, cni=nil, kubeproxymode=nil, servicecidr=nil, subnets=nil, ignoreservicecidrconflict=nil)
@ClusterCIDR = clustercidr
@IgnoreClusterCIDRConflict = ignoreclustercidrconflict
@MaxNodePodNum = maxnodepodnum
@MaxClusterServiceNum = maxclusterservicenum
@Ipvs = ipvs
@VpcId = vpcid
@Cni = cni
@KubeProxyMode = kubeproxymode
@ServiceCIDR = servicecidr
@Subnets = subnets
@IgnoreServiceCIDRConflict = ignoreservicecidrconflict
end
def deserialize(params)
@ClusterCIDR = params['ClusterCIDR']
@IgnoreClusterCIDRConflict = params['IgnoreClusterCIDRConflict']
@MaxNodePodNum = params['MaxNodePodNum']
@MaxClusterServiceNum = params['MaxClusterServiceNum']
@Ipvs = params['Ipvs']
@VpcId = params['VpcId']
@Cni = params['Cni']
@KubeProxyMode = params['KubeProxyMode']
@ServiceCIDR = params['ServiceCIDR']
@Subnets = params['Subnets']
@IgnoreServiceCIDRConflict = params['IgnoreServiceCIDRConflict']
end
end
# 弹性容器集群公网访问负载均衡信息
class ClusterPublicLB < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启公网访问LB
# @type Enabled: Boolean
# @param AllowFromCidrs: 允许访问的来源CIDR列表
# @type AllowFromCidrs: Array
# @param SecurityPolicies: 安全策略放通单个IP或CIDR(例如: "192.168.1.0/24",默认为拒绝所有)
# @type SecurityPolicies: Array
# @param ExtraParam: 外网访问相关的扩展参数，格式为json
# @type ExtraParam: String
# @param SecurityGroup: 新内外网功能，需要传递安全组
# @type SecurityGroup: String
attr_accessor :Enabled, :AllowFromCidrs, :SecurityPolicies, :ExtraParam, :SecurityGroup
def initialize(enabled=nil, allowfromcidrs=nil, securitypolicies=nil, extraparam=nil, securitygroup=nil)
@Enabled = enabled
@AllowFromCidrs = allowfromcidrs
@SecurityPolicies = securitypolicies
@ExtraParam = extraparam
@SecurityGroup = securitygroup
end
def deserialize(params)
@Enabled = params['Enabled']
@AllowFromCidrs = params['AllowFromCidrs']
@SecurityPolicies = params['SecurityPolicies']
@ExtraParam = params['ExtraParam']
@SecurityGroup = params['SecurityGroup']
end
end
# 集群状态信息
class ClusterStatus < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param ClusterState: 集群状态
# @type ClusterState: String
# @param ClusterInstanceState: 集群下机器实例的状态
# @type ClusterInstanceState: String
# @param ClusterBMonitor: 集群是否开启监控
# @type ClusterBMonitor: Boolean
# @param ClusterInitNodeNum: 集群创建中的节点数，-1表示获取节点状态超时，-2表示获取节点状态失败
# @type ClusterInitNodeNum: Integer
# @param ClusterRunningNodeNum: 集群运行中的节点数，-1表示获取节点状态超时，-2表示获取节点状态失败
# @type ClusterRunningNodeNum: Integer
# @param ClusterFailedNodeNum: 集群异常的节点数，-1表示获取节点状态超时，-2表示获取节点状态失败
# @type ClusterFailedNodeNum: Integer
# @param ClusterClosedNodeNum: 集群已关机的节点数，-1表示获取节点状态超时，-2表示获取节点状态失败
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterClosedNodeNum: Integer
# @param ClusterClosingNodeNum: 集群关机中的节点数，-1表示获取节点状态超时，-2表示获取节点状态失败
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterClosingNodeNum: Integer
# @param ClusterDeletionProtection: 集群是否开启删除保护
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterDeletionProtection: Boolean
# @param ClusterAuditEnabled: 集群是否可审计
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterAuditEnabled: Boolean
attr_accessor :ClusterId, :ClusterState, :ClusterInstanceState, :ClusterBMonitor, :ClusterInitNodeNum, :ClusterRunningNodeNum, :ClusterFailedNodeNum, :ClusterClosedNodeNum, :ClusterClosingNodeNum, :ClusterDeletionProtection, :ClusterAuditEnabled
def initialize(clusterid=nil, clusterstate=nil, clusterinstancestate=nil, clusterbmonitor=nil, clusterinitnodenum=nil, clusterrunningnodenum=nil, clusterfailednodenum=nil, clusterclosednodenum=nil, clusterclosingnodenum=nil, clusterdeletionprotection=nil, clusterauditenabled=nil)
@ClusterId = clusterid
@ClusterState = clusterstate
@ClusterInstanceState = clusterinstancestate
@ClusterBMonitor = clusterbmonitor
@ClusterInitNodeNum = clusterinitnodenum
@ClusterRunningNodeNum = clusterrunningnodenum
@ClusterFailedNodeNum = clusterfailednodenum
@ClusterClosedNodeNum = clusterclosednodenum
@ClusterClosingNodeNum = clusterclosingnodenum
@ClusterDeletionProtection = clusterdeletionprotection
@ClusterAuditEnabled = clusterauditenabled
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterState = params['ClusterState']
@ClusterInstanceState = params['ClusterInstanceState']
@ClusterBMonitor = params['ClusterBMonitor']
@ClusterInitNodeNum = params['ClusterInitNodeNum']
@ClusterRunningNodeNum = params['ClusterRunningNodeNum']
@ClusterFailedNodeNum = params['ClusterFailedNodeNum']
@ClusterClosedNodeNum = params['ClusterClosedNodeNum']
@ClusterClosingNodeNum = params['ClusterClosingNodeNum']
@ClusterDeletionProtection = params['ClusterDeletionProtection']
@ClusterAuditEnabled = params['ClusterAuditEnabled']
end
end
# 集群版本信息
class ClusterVersion < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Versions: 集群主版本号列表，例如1.18.4
# @type Versions: Array
attr_accessor :ClusterId, :Versions
def initialize(clusterid=nil, versions=nil)
@ClusterId = clusterid
@Versions = versions
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Versions = params['Versions']
end
end
# 账户UIN与客户端证书CommonName的映射
class CommonName < TencentCloud::Common::AbstractModel
# @param SubaccountUin: 子账户UIN
# @type SubaccountUin: String
# @param CN: 子账户客户端证书中的CommonName字段
# @type CN: String
attr_accessor :SubaccountUin, :CN
def initialize(subaccountuin=nil, cn=nil)
@SubaccountUin = subaccountuin
@CN = cn
end
def deserialize(params)
@SubaccountUin = params['SubaccountUin']
@CN = params['CN']
end
end
# EKS Instance Container容器
class Container < TencentCloud::Common::AbstractModel
# @param Image: 镜像
# @type Image: String
# @param Name: 容器名
# @type Name: String
# @param Commands: 容器启动命令
# @type Commands: Array
# @param Args: 容器启动参数
# @type Args: Array
# @param EnvironmentVars: 容器内操作系统的环境变量
# @type EnvironmentVars: Array
# @param Cpu: CPU，制改容器最多可使用的核数，该值不可超过容器实例的总核数。单位：核。
# @type Cpu: Float
# @param Memory: 内存，限制该容器最多可使用的内存值，该值不可超过容器实例的总内存值。单位：GiB
# @type Memory: Float
# @param VolumeMounts: 数据卷挂载信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VolumeMounts: Array
# @param CurrentState: 当前状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CurrentState: :class:`Tencentcloud::Tke.v20180525.models.ContainerState`
# @param RestartCount: 重启次数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RestartCount: Integer
# @param WorkingDir: 容器工作目录
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WorkingDir: String
# @param LivenessProbe: 存活探针
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LivenessProbe: :class:`Tencentcloud::Tke.v20180525.models.LivenessOrReadinessProbe`
# @param ReadinessProbe: 就绪探针
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReadinessProbe: :class:`Tencentcloud::Tke.v20180525.models.LivenessOrReadinessProbe`
# @param GpuLimit: Gpu限制
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GpuLimit: Integer
# @param SecurityContext: 容器的安全上下文
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityContext: :class:`Tencentcloud::Tke.v20180525.models.SecurityContext`
attr_accessor :Image, :Name, :Commands, :Args, :EnvironmentVars, :Cpu, :Memory, :VolumeMounts, :CurrentState, :RestartCount, :WorkingDir, :LivenessProbe, :ReadinessProbe, :GpuLimit, :SecurityContext
def initialize(image=nil, name=nil, commands=nil, args=nil, environmentvars=nil, cpu=nil, memory=nil, volumemounts=nil, currentstate=nil, restartcount=nil, workingdir=nil, livenessprobe=nil, readinessprobe=nil, gpulimit=nil, securitycontext=nil)
@Image = image
@Name = name
@Commands = commands
@Args = args
@EnvironmentVars = environmentvars
@Cpu = cpu
@Memory = memory
@VolumeMounts = volumemounts
@CurrentState = currentstate
@RestartCount = restartcount
@WorkingDir = workingdir
@LivenessProbe = livenessprobe
@ReadinessProbe = readinessprobe
@GpuLimit = gpulimit
@SecurityContext = securitycontext
end
def deserialize(params)
@Image = params['Image']
@Name = params['Name']
@Commands = params['Commands']
@Args = params['Args']
unless params['EnvironmentVars'].nil?
@EnvironmentVars = []
params['EnvironmentVars'].each do |i|
environmentvariable_tmp = EnvironmentVariable.new
environmentvariable_tmp.deserialize(i)
@EnvironmentVars << environmentvariable_tmp
end
end
@Cpu = params['Cpu']
@Memory = params['Memory']
unless params['VolumeMounts'].nil?
@VolumeMounts = []
params['VolumeMounts'].each do |i|
volumemount_tmp = VolumeMount.new
volumemount_tmp.deserialize(i)
@VolumeMounts << volumemount_tmp
end
end
unless params['CurrentState'].nil?
@CurrentState = ContainerState.new
@CurrentState.deserialize(params['CurrentState'])
end
@RestartCount = params['RestartCount']
@WorkingDir = params['WorkingDir']
unless params['LivenessProbe'].nil?
@LivenessProbe = LivenessOrReadinessProbe.new
@LivenessProbe.deserialize(params['LivenessProbe'])
end
unless params['ReadinessProbe'].nil?
@ReadinessProbe = LivenessOrReadinessProbe.new
@ReadinessProbe.deserialize(params['ReadinessProbe'])
end
@GpuLimit = params['GpuLimit']
unless params['SecurityContext'].nil?
@SecurityContext = SecurityContext.new
@SecurityContext.deserialize(params['SecurityContext'])
end
end
end
# 容器状态
class ContainerState < TencentCloud::Common::AbstractModel
# @param StartTime: 容器运行开始时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: String
# @param State: 容器状态：created, running, exited, unknown
# @type State: String
# @param FinishTime: 容器运行结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FinishTime: String
# @param ExitCode: 容器运行退出码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExitCode: Integer
# @param Reason: 容器状态 Reason
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Reason: String
# @param Message: 容器状态信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Message: String
# @param RestartCount: 容器重启次数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RestartCount: Integer
attr_accessor :StartTime, :State, :FinishTime, :ExitCode, :Reason, :Message, :RestartCount
def initialize(starttime=nil, state=nil, finishtime=nil, exitcode=nil, reason=nil, message=nil, restartcount=nil)
@StartTime = starttime
@State = state
@FinishTime = finishtime
@ExitCode = exitcode
@Reason = reason
@Message = message
@RestartCount = restartcount
end
def deserialize(params)
@StartTime = params['StartTime']
@State = params['State']
@FinishTime = params['FinishTime']
@ExitCode = params['ExitCode']
@Reason = params['Reason']
@Message = params['Message']
@RestartCount = params['RestartCount']
end
end
# 集群中控制器的状态描述
class ControllerStatus < TencentCloud::Common::AbstractModel
# @param Name: 控制器的名字
# @type Name: String
# @param Enabled: 控制器是否开启
# @type Enabled: Boolean
attr_accessor :Name, :Enabled
def initialize(name=nil, enabled=nil)
@Name = name
@Enabled = enabled
end
def deserialize(params)
@Name = params['Name']
@Enabled = params['Enabled']
end
end
# CreateClusterEndpoint请求参数结构体
class CreateClusterEndpointRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SubnetId: 集群端口所在的子网ID (仅在开启非外网访问时需要填，必须为集群所在VPC内的子网)
# @type SubnetId: String
# @param IsExtranet: 是否为外网访问（TRUE 外网访问 FALSE 内网访问，默认值： FALSE）
# @type IsExtranet: Boolean
# @param Domain: 设置域名
# @type Domain: String
# @param SecurityGroup: 使用的安全组，只有外网访问需要传递
# @type SecurityGroup: String
# @param ExtensiveParameters: 创建lb参数，只有外网访问需要设置
# @type ExtensiveParameters: String
attr_accessor :ClusterId, :SubnetId, :IsExtranet, :Domain, :SecurityGroup, :ExtensiveParameters
def initialize(clusterid=nil, subnetid=nil, isextranet=nil, domain=nil, securitygroup=nil, extensiveparameters=nil)
@ClusterId = clusterid
@SubnetId = subnetid
@IsExtranet = isextranet
@Domain = domain
@SecurityGroup = securitygroup
@ExtensiveParameters = extensiveparameters
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SubnetId = params['SubnetId']
@IsExtranet = params['IsExtranet']
@Domain = params['Domain']
@SecurityGroup = params['SecurityGroup']
@ExtensiveParameters = params['ExtensiveParameters']
end
end
# CreateClusterEndpoint返回参数结构体
class CreateClusterEndpointResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateClusterEndpointVip请求参数结构体
class CreateClusterEndpointVipRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SecurityPolicies: 安全策略放通单个IP或CIDR(例如: "192.168.1.0/24",默认为拒绝所有)
# @type SecurityPolicies: Array
attr_accessor :ClusterId, :SecurityPolicies
def initialize(clusterid=nil, securitypolicies=nil)
@ClusterId = clusterid
@SecurityPolicies = securitypolicies
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SecurityPolicies = params['SecurityPolicies']
end
end
# CreateClusterEndpointVip返回参数结构体
class CreateClusterEndpointVipResponse < TencentCloud::Common::AbstractModel
# @param RequestFlowId: 请求任务的FlowId
# @type RequestFlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestFlowId, :RequestId
def initialize(requestflowid=nil, requestid=nil)
@RequestFlowId = requestflowid
@RequestId = requestid
end
def deserialize(params)
@RequestFlowId = params['RequestFlowId']
@RequestId = params['RequestId']
end
end
# CreateClusterInstances请求参数结构体
class CreateClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 ID，请填写 查询集群列表 接口中返回的 clusterId 字段
# @type ClusterId: String
# @param RunInstancePara: CVM创建透传参数，json化字符串格式，如需要保证扩展集群节点请求幂等性需要在此参数添加ClientToken字段，详见[CVM创建实例](https://cloud.tencent.com/document/product/213/15730)接口。
# @type RunInstancePara: String
# @param InstanceAdvancedSettings: 实例额外需要设置参数信息
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param SkipValidateOptions: 校验规则相关选项，可配置跳过某些校验规则。目前支持GlobalRouteCIDRCheck（跳过GlobalRouter的相关校验），VpcCniCIDRCheck（跳过VpcCni相关校验）
# @type SkipValidateOptions: Array
attr_accessor :ClusterId, :RunInstancePara, :InstanceAdvancedSettings, :SkipValidateOptions
def initialize(clusterid=nil, runinstancepara=nil, instanceadvancedsettings=nil, skipvalidateoptions=nil)
@ClusterId = clusterid
@RunInstancePara = runinstancepara
@InstanceAdvancedSettings = instanceadvancedsettings
@SkipValidateOptions = skipvalidateoptions
end
def deserialize(params)
@ClusterId = params['ClusterId']
@RunInstancePara = params['RunInstancePara']
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
@SkipValidateOptions = params['SkipValidateOptions']
end
end
# CreateClusterInstances返回参数结构体
class CreateClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param InstanceIdSet: 节点实例ID
# @type InstanceIdSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceIdSet, :RequestId
def initialize(instanceidset=nil, requestid=nil)
@InstanceIdSet = instanceidset
@RequestId = requestid
end
def deserialize(params)
@InstanceIdSet = params['InstanceIdSet']
@RequestId = params['RequestId']
end
end
# CreateClusterNodePoolFromExistingAsg请求参数结构体
class CreateClusterNodePoolFromExistingAsgRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param AutoscalingGroupId: 伸缩组ID
# @type AutoscalingGroupId: String
attr_accessor :ClusterId, :AutoscalingGroupId
def initialize(clusterid=nil, autoscalinggroupid=nil)
@ClusterId = clusterid
@AutoscalingGroupId = autoscalinggroupid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@AutoscalingGroupId = params['AutoscalingGroupId']
end
end
# CreateClusterNodePoolFromExistingAsg返回参数结构体
class CreateClusterNodePoolFromExistingAsgResponse < TencentCloud::Common::AbstractModel
# @param NodePoolId: 节点池ID
# @type NodePoolId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NodePoolId, :RequestId
def initialize(nodepoolid=nil, requestid=nil)
@NodePoolId = nodepoolid
@RequestId = requestid
end
def deserialize(params)
@NodePoolId = params['NodePoolId']
@RequestId = params['RequestId']
end
end
# CreateClusterNodePool请求参数结构体
class CreateClusterNodePoolRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: cluster id
# @type ClusterId: String
# @param AutoScalingGroupPara: AutoScalingGroupPara AS组参数
# @type AutoScalingGroupPara: String
# @param LaunchConfigurePara: LaunchConfigurePara 运行参数
# @type LaunchConfigurePara: String
# @param InstanceAdvancedSettings: InstanceAdvancedSettings 示例参数
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param EnableAutoscale: 是否启用自动伸缩
# @type EnableAutoscale: Boolean
# @param Name: 节点池名称
# @type Name: String
# @param Labels: Labels标签
# @type Labels: Array
# @param Taints: Taints互斥
# @type Taints: Array
# @param ContainerRuntime: 节点池纬度运行时类型及版本
# @type ContainerRuntime: String
# @param RuntimeVersion: 运行时版本
# @type RuntimeVersion: String
# @param NodePoolOs: 节点池os，当为自定义镜像时，传镜像id；否则为公共镜像的osName
# @type NodePoolOs: String
# @param OsCustomizeType: 容器的镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# @type OsCustomizeType: String
# @param Tags: 资源标签
# @type Tags: Array
attr_accessor :ClusterId, :AutoScalingGroupPara, :LaunchConfigurePara, :InstanceAdvancedSettings, :EnableAutoscale, :Name, :Labels, :Taints, :ContainerRuntime, :RuntimeVersion, :NodePoolOs, :OsCustomizeType, :Tags
def initialize(clusterid=nil, autoscalinggrouppara=nil, launchconfigurepara=nil, instanceadvancedsettings=nil, enableautoscale=nil, name=nil, labels=nil, taints=nil, containerruntime=nil, runtimeversion=nil, nodepoolos=nil, oscustomizetype=nil, tags=nil)
@ClusterId = clusterid
@AutoScalingGroupPara = autoscalinggrouppara
@LaunchConfigurePara = launchconfigurepara
@InstanceAdvancedSettings = instanceadvancedsettings
@EnableAutoscale = enableautoscale
@Name = name
@Labels = labels
@Taints = taints
@ContainerRuntime = containerruntime
@RuntimeVersion = runtimeversion
@NodePoolOs = nodepoolos
@OsCustomizeType = oscustomizetype
@Tags = tags
end
def deserialize(params)
@ClusterId = params['ClusterId']
@AutoScalingGroupPara = params['AutoScalingGroupPara']
@LaunchConfigurePara = params['LaunchConfigurePara']
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
@EnableAutoscale = params['EnableAutoscale']
@Name = params['Name']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
unless params['Taints'].nil?
@Taints = []
params['Taints'].each do |i|
taint_tmp = Taint.new
taint_tmp.deserialize(i)
@Taints << taint_tmp
end
end
@ContainerRuntime = params['ContainerRuntime']
@RuntimeVersion = params['RuntimeVersion']
@NodePoolOs = params['NodePoolOs']
@OsCustomizeType = params['OsCustomizeType']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# CreateClusterNodePool返回参数结构体
class CreateClusterNodePoolResponse < TencentCloud::Common::AbstractModel
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NodePoolId, :RequestId
def initialize(nodepoolid=nil, requestid=nil)
@NodePoolId = nodepoolid
@RequestId = requestid
end
def deserialize(params)
@NodePoolId = params['NodePoolId']
@RequestId = params['RequestId']
end
end
# CreateCluster请求参数结构体
class CreateClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterCIDRSettings: 集群容器网络配置信息
# @type ClusterCIDRSettings: :class:`Tencentcloud::Tke.v20180525.models.ClusterCIDRSettings`
# @param ClusterType: 集群类型，托管集群：MANAGED_CLUSTER，独立集群：INDEPENDENT_CLUSTER。
# @type ClusterType: String
# @param RunInstancesForNode: CVM创建透传参数，json化字符串格式，详见[CVM创建实例](https://cloud.tencent.com/document/product/213/15730)接口。总机型(包括地域)数量不超过10个，相同机型(地域)购买多台机器可以通过设置参数中RunInstances中InstanceCount来实现。
# @type RunInstancesForNode: Array
# @param ClusterBasicSettings: 集群的基本配置信息
# @type ClusterBasicSettings: :class:`Tencentcloud::Tke.v20180525.models.ClusterBasicSettings`
# @param ClusterAdvancedSettings: 集群高级配置信息
# @type ClusterAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.ClusterAdvancedSettings`
# @param InstanceAdvancedSettings: 节点高级配置信息
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param ExistedInstancesForNode: 已存在实例的配置信息。所有实例必须在同一个VPC中，最大数量不超过100，不支持添加竞价实例。
# @type ExistedInstancesForNode: Array
# @param InstanceDataDiskMountSettings: CVM类型和其对应的数据盘挂载配置信息
# @type InstanceDataDiskMountSettings: Array
# @param ExtensionAddons: 需要安装的扩展组件信息
# @type ExtensionAddons: Array
attr_accessor :ClusterCIDRSettings, :ClusterType, :RunInstancesForNode, :ClusterBasicSettings, :ClusterAdvancedSettings, :InstanceAdvancedSettings, :ExistedInstancesForNode, :InstanceDataDiskMountSettings, :ExtensionAddons
def initialize(clustercidrsettings=nil, clustertype=nil, runinstancesfornode=nil, clusterbasicsettings=nil, clusteradvancedsettings=nil, instanceadvancedsettings=nil, existedinstancesfornode=nil, instancedatadiskmountsettings=nil, extensionaddons=nil)
@ClusterCIDRSettings = clustercidrsettings
@ClusterType = clustertype
@RunInstancesForNode = runinstancesfornode
@ClusterBasicSettings = clusterbasicsettings
@ClusterAdvancedSettings = clusteradvancedsettings
@InstanceAdvancedSettings = instanceadvancedsettings
@ExistedInstancesForNode = existedinstancesfornode
@InstanceDataDiskMountSettings = instancedatadiskmountsettings
@ExtensionAddons = extensionaddons
end
def deserialize(params)
unless params['ClusterCIDRSettings'].nil?
@ClusterCIDRSettings = ClusterCIDRSettings.new
@ClusterCIDRSettings.deserialize(params['ClusterCIDRSettings'])
end
@ClusterType = params['ClusterType']
unless params['RunInstancesForNode'].nil?
@RunInstancesForNode = []
params['RunInstancesForNode'].each do |i|
runinstancesfornode_tmp = RunInstancesForNode.new
runinstancesfornode_tmp.deserialize(i)
@RunInstancesForNode << runinstancesfornode_tmp
end
end
unless params['ClusterBasicSettings'].nil?
@ClusterBasicSettings = ClusterBasicSettings.new
@ClusterBasicSettings.deserialize(params['ClusterBasicSettings'])
end
unless params['ClusterAdvancedSettings'].nil?
@ClusterAdvancedSettings = ClusterAdvancedSettings.new
@ClusterAdvancedSettings.deserialize(params['ClusterAdvancedSettings'])
end
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
unless params['ExistedInstancesForNode'].nil?
@ExistedInstancesForNode = []
params['ExistedInstancesForNode'].each do |i|
existedinstancesfornode_tmp = ExistedInstancesForNode.new
existedinstancesfornode_tmp.deserialize(i)
@ExistedInstancesForNode << existedinstancesfornode_tmp
end
end
unless params['InstanceDataDiskMountSettings'].nil?
@InstanceDataDiskMountSettings = []
params['InstanceDataDiskMountSettings'].each do |i|
instancedatadiskmountsetting_tmp = InstanceDataDiskMountSetting.new
instancedatadiskmountsetting_tmp.deserialize(i)
@InstanceDataDiskMountSettings << instancedatadiskmountsetting_tmp
end
end
unless params['ExtensionAddons'].nil?
@ExtensionAddons = []
params['ExtensionAddons'].each do |i|
extensionaddon_tmp = ExtensionAddon.new
extensionaddon_tmp.deserialize(i)
@ExtensionAddons << extensionaddon_tmp
end
end
end
end
# CreateCluster返回参数结构体
class CreateClusterResponse < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterId, :RequestId
def initialize(clusterid=nil, requestid=nil)
@ClusterId = clusterid
@RequestId = requestid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@RequestId = params['RequestId']
end
end
# CreateClusterRoute请求参数结构体
class CreateClusterRouteRequest < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param DestinationCidrBlock: 目的端CIDR。
# @type DestinationCidrBlock: String
# @param GatewayIp: 下一跳地址。
# @type GatewayIp: String
attr_accessor :RouteTableName, :DestinationCidrBlock, :GatewayIp
def initialize(routetablename=nil, destinationcidrblock=nil, gatewayip=nil)
@RouteTableName = routetablename
@DestinationCidrBlock = destinationcidrblock
@GatewayIp = gatewayip
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
@DestinationCidrBlock = params['DestinationCidrBlock']
@GatewayIp = params['GatewayIp']
end
end
# CreateClusterRoute返回参数结构体
class CreateClusterRouteResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateClusterRouteTable请求参数结构体
class CreateClusterRouteTableRequest < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称
# @type RouteTableName: String
# @param RouteTableCidrBlock: 路由表CIDR
# @type RouteTableCidrBlock: String
# @param VpcId: 路由表绑定的VPC
# @type VpcId: String
# @param IgnoreClusterCidrConflict: 是否忽略CIDR冲突
# @type IgnoreClusterCidrConflict: Integer
attr_accessor :RouteTableName, :RouteTableCidrBlock, :VpcId, :IgnoreClusterCidrConflict
def initialize(routetablename=nil, routetablecidrblock=nil, vpcid=nil, ignoreclustercidrconflict=nil)
@RouteTableName = routetablename
@RouteTableCidrBlock = routetablecidrblock
@VpcId = vpcid
@IgnoreClusterCidrConflict = ignoreclustercidrconflict
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
@RouteTableCidrBlock = params['RouteTableCidrBlock']
@VpcId = params['VpcId']
@IgnoreClusterCidrConflict = params['IgnoreClusterCidrConflict']
end
end
# CreateClusterRouteTable返回参数结构体
class CreateClusterRouteTableResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateECMInstances请求参数结构体
class CreateECMInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群id
# @type ClusterID: String
# @param ModuleId: 模块id
# @type ModuleId: String
# @param ZoneInstanceCountISPSet: 需要创建实例的可用区及创建数目及运营商的列表
# @type ZoneInstanceCountISPSet: Array
# @param Password: 密码
# @type Password: String
# @param InternetMaxBandwidthOut: 公网带宽
# @type InternetMaxBandwidthOut: Integer
# @param ImageId: 镜像id
# @type ImageId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param HostName: 主机名称
# @type HostName: String
# @param EnhancedService: 增强服务，包括云镜和云监控
# @type EnhancedService: :class:`Tencentcloud::Tke.v20180525.models.ECMEnhancedService`
# @param UserData: 用户自定义脚本
# @type UserData: String
# @param External: 实例扩展信息
# @type External: String
# @param SecurityGroupIds: 实例所属安全组
# @type SecurityGroupIds: Array
attr_accessor :ClusterID, :ModuleId, :ZoneInstanceCountISPSet, :Password, :InternetMaxBandwidthOut, :ImageId, :InstanceName, :HostName, :EnhancedService, :UserData, :External, :SecurityGroupIds
def initialize(clusterid=nil, moduleid=nil, zoneinstancecountispset=nil, password=nil, internetmaxbandwidthout=nil, imageid=nil, instancename=nil, hostname=nil, enhancedservice=nil, userdata=nil, external=nil, securitygroupids=nil)
@ClusterID = clusterid
@ModuleId = moduleid
@ZoneInstanceCountISPSet = zoneinstancecountispset
@Password = password
@InternetMaxBandwidthOut = internetmaxbandwidthout
@ImageId = imageid
@InstanceName = instancename
@HostName = hostname
@EnhancedService = enhancedservice
@UserData = userdata
@External = external
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@ClusterID = params['ClusterID']
@ModuleId = params['ModuleId']
unless params['ZoneInstanceCountISPSet'].nil?
@ZoneInstanceCountISPSet = []
params['ZoneInstanceCountISPSet'].each do |i|
ecmzoneinstancecountisp_tmp = ECMZoneInstanceCountISP.new
ecmzoneinstancecountisp_tmp.deserialize(i)
@ZoneInstanceCountISPSet << ecmzoneinstancecountisp_tmp
end
end
@Password = params['Password']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@ImageId = params['ImageId']
@InstanceName = params['InstanceName']
@HostName = params['HostName']
unless params['EnhancedService'].nil?
@EnhancedService = ECMEnhancedService.new
@EnhancedService.deserialize(params['EnhancedService'])
end
@UserData = params['UserData']
@External = params['External']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# CreateECMInstances返回参数结构体
class CreateECMInstancesResponse < TencentCloud::Common::AbstractModel
# @param EcmIdSet: ecm id 列表
# @type EcmIdSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EcmIdSet, :RequestId
def initialize(ecmidset=nil, requestid=nil)
@EcmIdSet = ecmidset
@RequestId = requestid
end
def deserialize(params)
@EcmIdSet = params['EcmIdSet']
@RequestId = params['RequestId']
end
end
# CreateEKSCluster请求参数结构体
class CreateEKSClusterRequest < TencentCloud::Common::AbstractModel
# @param K8SVersion: k8s版本号。可为1.14.4, 1.12.8。
# @type K8SVersion: String
# @param VpcId: vpc 的Id
# @type VpcId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param SubnetIds: 子网Id 列表
# @type SubnetIds: Array
# @param ClusterDesc: 集群描述信息
# @type ClusterDesc: String
# @param ServiceSubnetId: Serivce 所在子网Id
# @type ServiceSubnetId: String
# @param DnsServers: 集群自定义的Dns服务器信息
# @type DnsServers: Array
# @param ExtraParam: 扩展参数。须是map[string]string 的json 格式。
# @type ExtraParam: String
# @param EnableVpcCoreDNS: 是否在用户集群内开启Dns。默认为true
# @type EnableVpcCoreDNS: Boolean
# @param TagSpecification: 标签描述列表。通过指定该参数可以同时绑定标签到相应的资源实例，当前仅支持绑定标签到集群实例。
# @type TagSpecification: Array
# @param SubnetInfos: 子网信息列表
# @type SubnetInfos: Array
attr_accessor :K8SVersion, :VpcId, :ClusterName, :SubnetIds, :ClusterDesc, :ServiceSubnetId, :DnsServers, :ExtraParam, :EnableVpcCoreDNS, :TagSpecification, :SubnetInfos
def initialize(k8sversion=nil, vpcid=nil, clustername=nil, subnetids=nil, clusterdesc=nil, servicesubnetid=nil, dnsservers=nil, extraparam=nil, enablevpccoredns=nil, tagspecification=nil, subnetinfos=nil)
@K8SVersion = k8sversion
@VpcId = vpcid
@ClusterName = clustername
@SubnetIds = subnetids
@ClusterDesc = clusterdesc
@ServiceSubnetId = servicesubnetid
@DnsServers = dnsservers
@ExtraParam = extraparam
@EnableVpcCoreDNS = enablevpccoredns
@TagSpecification = tagspecification
@SubnetInfos = subnetinfos
end
def deserialize(params)
@K8SVersion = params['K8SVersion']
@VpcId = params['VpcId']
@ClusterName = params['ClusterName']
@SubnetIds = params['SubnetIds']
@ClusterDesc = params['ClusterDesc']
@ServiceSubnetId = params['ServiceSubnetId']
unless params['DnsServers'].nil?
@DnsServers = []
params['DnsServers'].each do |i|
dnsserverconf_tmp = DnsServerConf.new
dnsserverconf_tmp.deserialize(i)
@DnsServers << dnsserverconf_tmp
end
end
@ExtraParam = params['ExtraParam']
@EnableVpcCoreDNS = params['EnableVpcCoreDNS']
unless params['TagSpecification'].nil?
@TagSpecification = []
params['TagSpecification'].each do |i|
tagspecification_tmp = TagSpecification.new
tagspecification_tmp.deserialize(i)
@TagSpecification << tagspecification_tmp
end
end
unless params['SubnetInfos'].nil?
@SubnetInfos = []
params['SubnetInfos'].each do |i|
subnetinfos_tmp = SubnetInfos.new
subnetinfos_tmp.deserialize(i)
@SubnetInfos << subnetinfos_tmp
end
end
end
end
# CreateEKSCluster返回参数结构体
class CreateEKSClusterResponse < TencentCloud::Common::AbstractModel
# @param ClusterId: 弹性集群Id
# @type ClusterId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterId, :RequestId
def initialize(clusterid=nil, requestid=nil)
@ClusterId = clusterid
@RequestId = requestid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@RequestId = params['RequestId']
end
end
# CreateEKSContainerInstances请求参数结构体
class CreateEKSContainerInstancesRequest < TencentCloud::Common::AbstractModel
# @param Containers: 容器组
# @type Containers: Array
# @param EksCiName: EKS Container Instance容器实例名称
# @type EksCiName: String
# @param SecurityGroupIds: 指定新创建实例所属于的安全组Id
# @type SecurityGroupIds: Array
# @param SubnetId: 实例所属子网Id
# @type SubnetId: String
# @param VpcId: 实例所属VPC的Id
# @type VpcId: String
# @param Memory: 内存，单位：GiB。可参考[资源规格](https://cloud.tencent.com/document/product/457/39808)文档
# @type Memory: Float
# @param Cpu: CPU，单位：核。可参考[资源规格](https://cloud.tencent.com/document/product/457/39808)文档
# @type Cpu: Float
# @param RestartPolicy: 实例重启策略： Always(总是重启)、Never(从不重启)、OnFailure(失败时重启)，默认：Always。
# @type RestartPolicy: String
# @param ImageRegistryCredentials: 镜像仓库凭证数组
# @type ImageRegistryCredentials: Array
# @param EksCiVolume: 数据卷，包含NfsVolume数组和CbsVolume数组
# @type EksCiVolume: :class:`Tencentcloud::Tke.v20180525.models.EksCiVolume`
# @param Replicas: 实例副本数，默认为1
# @type Replicas: Integer
# @param InitContainers: Init 容器
# @type InitContainers: Array
# @param DnsConfig: 自定义DNS配置
# @type DnsConfig: :class:`Tencentcloud::Tke.v20180525.models.DNSConfig`
# @param ExistedEipIds: 用来绑定容器实例的已有EIP的列表。如传值，需要保证数值和Replicas相等。
# 另外此参数和AutoCreateEipAttribute互斥。
# @type ExistedEipIds: Array
# @param AutoCreateEipAttribute: 自动创建EIP的可选参数。若传此参数，则会自动创建EIP。
# 另外此参数和ExistedEipIds互斥
# @type AutoCreateEipAttribute: :class:`Tencentcloud::Tke.v20180525.models.EipAttribute`
# @param AutoCreateEip: 是否为容器实例自动创建EIP，默认为false。若传true，则此参数和ExistedEipIds互斥
# @type AutoCreateEip: Boolean
# @param CpuType: Pod 所需的 CPU 资源型号，如果不填写则默认不强制指定 CPU 类型。目前支持型号如下：
# intel
# amd
# - 支持优先级顺序写法，如 “amd,intel” 表示优先创建 amd 资源 Pod，如果所选地域可用区 amd 资源不足，则会创建 intel 资源 Pod。
# @type CpuType: String
# @param GpuType: 容器实例所需的 GPU 资源型号，目前支持型号如下：
# 1/4\*V100
# 1/2\*V100
# V100
# 1/4\*T4
# 1/2\*T4
# T4
# @type GpuType: String
# @param GpuCount: Pod 所需的 GPU 数量，如填写，请确保为支持的规格。默认单位为卡，无需再次注明。
# @type GpuCount: Integer
# @param CamRoleName: 为容器实例关联 CAM 角色，value 填写 CAM 角色名称，容器实例可获取该 CAM 角色包含的权限策略，方便 容器实例 内的程序进行如购买资源、读写存储等云资源操作。
# @type CamRoleName: String
attr_accessor :Containers, :EksCiName, :SecurityGroupIds, :SubnetId, :VpcId, :Memory, :Cpu, :RestartPolicy, :ImageRegistryCredentials, :EksCiVolume, :Replicas, :InitContainers, :DnsConfig, :ExistedEipIds, :AutoCreateEipAttribute, :AutoCreateEip, :CpuType, :GpuType, :GpuCount, :CamRoleName
def initialize(containers=nil, eksciname=nil, securitygroupids=nil, subnetid=nil, vpcid=nil, memory=nil, cpu=nil, restartpolicy=nil, imageregistrycredentials=nil, ekscivolume=nil, replicas=nil, initcontainers=nil, dnsconfig=nil, existedeipids=nil, autocreateeipattribute=nil, autocreateeip=nil, cputype=nil, gputype=nil, gpucount=nil, camrolename=nil)
@Containers = containers
@EksCiName = eksciname
@SecurityGroupIds = securitygroupids
@SubnetId = subnetid
@VpcId = vpcid
@Memory = memory
@Cpu = cpu
@RestartPolicy = restartpolicy
@ImageRegistryCredentials = imageregistrycredentials
@EksCiVolume = ekscivolume
@Replicas = replicas
@InitContainers = initcontainers
@DnsConfig = dnsconfig
@ExistedEipIds = existedeipids
@AutoCreateEipAttribute = autocreateeipattribute
@AutoCreateEip = autocreateeip
@CpuType = cputype
@GpuType = gputype
@GpuCount = gpucount
@CamRoleName = camrolename
end
def deserialize(params)
unless params['Containers'].nil?
@Containers = []
params['Containers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@Containers << container_tmp
end
end
@EksCiName = params['EksCiName']
@SecurityGroupIds = params['SecurityGroupIds']
@SubnetId = params['SubnetId']
@VpcId = params['VpcId']
@Memory = params['Memory']
@Cpu = params['Cpu']
@RestartPolicy = params['RestartPolicy']
unless params['ImageRegistryCredentials'].nil?
@ImageRegistryCredentials = []
params['ImageRegistryCredentials'].each do |i|
imageregistrycredential_tmp = ImageRegistryCredential.new
imageregistrycredential_tmp.deserialize(i)
@ImageRegistryCredentials << imageregistrycredential_tmp
end
end
unless params['EksCiVolume'].nil?
@EksCiVolume = EksCiVolume.new
@EksCiVolume.deserialize(params['EksCiVolume'])
end
@Replicas = params['Replicas']
unless params['InitContainers'].nil?
@InitContainers = []
params['InitContainers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@InitContainers << container_tmp
end
end
unless params['DnsConfig'].nil?
@DnsConfig = DNSConfig.new
@DnsConfig.deserialize(params['DnsConfig'])
end
@ExistedEipIds = params['ExistedEipIds']
unless params['AutoCreateEipAttribute'].nil?
@AutoCreateEipAttribute = EipAttribute.new
@AutoCreateEipAttribute.deserialize(params['AutoCreateEipAttribute'])
end
@AutoCreateEip = params['AutoCreateEip']
@CpuType = params['CpuType']
@GpuType = params['GpuType']
@GpuCount = params['GpuCount']
@CamRoleName = params['CamRoleName']
end
end
# CreateEKSContainerInstances返回参数结构体
class CreateEKSContainerInstancesResponse < TencentCloud::Common::AbstractModel
# @param EksCiIds: EKS Container Instance Id集合，格式为eksci-xxx，是容器实例的唯一标识。
# @type EksCiIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EksCiIds, :RequestId
def initialize(eksciids=nil, requestid=nil)
@EksCiIds = eksciids
@RequestId = requestid
end
def deserialize(params)
@EksCiIds = params['EksCiIds']
@RequestId = params['RequestId']
end
end
# CreateImageCache请求参数结构体
class CreateImageCacheRequest < TencentCloud::Common::AbstractModel
# @param Images: 用于制作镜像缓存的容器镜像列表
# @type Images: Array
# @param SubnetId: 实例所属子网Id
# @type SubnetId: String
# @param VpcId: 实例所属VPC Id
# @type VpcId: String
# @param ImageCacheName: 镜像缓存名称
# @type ImageCacheName: String
# @param SecurityGroupIds: 安全组Id
# @type SecurityGroupIds: Array
# @param ImageRegistryCredentials: 镜像仓库凭证数组
# @type ImageRegistryCredentials: Array
# @param ExistedEipId: 用来绑定容器实例的已有EIP
# @type ExistedEipId: String
# @param AutoCreateEip: 是否为容器实例自动创建EIP，默认为false。若传true，则此参数和ExistedEipIds互斥
# @type AutoCreateEip: Boolean
# @param AutoCreateEipAttribute: 自动创建EIP的可选参数。若传此参数，则会自动创建EIP。
# 另外此参数和ExistedEipIds互斥
# @type AutoCreateEipAttribute: :class:`Tencentcloud::Tke.v20180525.models.EipAttribute`
# @param ImageCacheSize: 镜像缓存的大小。默认为20 GiB。取值范围参考[云硬盘类型](https://cloud.tencent.com/document/product/362/2353)中的高性能云盘类型的大小限制。
# @type ImageCacheSize: Integer
# @param RetentionDays: 镜像缓存保留时间天数，过期将会自动清理，默认为0，永不过期。
# @type RetentionDays: Integer
attr_accessor :Images, :SubnetId, :VpcId, :ImageCacheName, :SecurityGroupIds, :ImageRegistryCredentials, :ExistedEipId, :AutoCreateEip, :AutoCreateEipAttribute, :ImageCacheSize, :RetentionDays
def initialize(images=nil, subnetid=nil, vpcid=nil, imagecachename=nil, securitygroupids=nil, imageregistrycredentials=nil, existedeipid=nil, autocreateeip=nil, autocreateeipattribute=nil, imagecachesize=nil, retentiondays=nil)
@Images = images
@SubnetId = subnetid
@VpcId = vpcid
@ImageCacheName = imagecachename
@SecurityGroupIds = securitygroupids
@ImageRegistryCredentials = imageregistrycredentials
@ExistedEipId = existedeipid
@AutoCreateEip = autocreateeip
@AutoCreateEipAttribute = autocreateeipattribute
@ImageCacheSize = imagecachesize
@RetentionDays = retentiondays
end
def deserialize(params)
@Images = params['Images']
@SubnetId = params['SubnetId']
@VpcId = params['VpcId']
@ImageCacheName = params['ImageCacheName']
@SecurityGroupIds = params['SecurityGroupIds']
unless params['ImageRegistryCredentials'].nil?
@ImageRegistryCredentials = []
params['ImageRegistryCredentials'].each do |i|
imageregistrycredential_tmp = ImageRegistryCredential.new
imageregistrycredential_tmp.deserialize(i)
@ImageRegistryCredentials << imageregistrycredential_tmp
end
end
@ExistedEipId = params['ExistedEipId']
@AutoCreateEip = params['AutoCreateEip']
unless params['AutoCreateEipAttribute'].nil?
@AutoCreateEipAttribute = EipAttribute.new
@AutoCreateEipAttribute.deserialize(params['AutoCreateEipAttribute'])
end
@ImageCacheSize = params['ImageCacheSize']
@RetentionDays = params['RetentionDays']
end
end
# CreateImageCache返回参数结构体
class CreateImageCacheResponse < TencentCloud::Common::AbstractModel
# @param ImageCacheId: 镜像缓存Id
# @type ImageCacheId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageCacheId, :RequestId
def initialize(imagecacheid=nil, requestid=nil)
@ImageCacheId = imagecacheid
@RequestId = requestid
end
def deserialize(params)
@ImageCacheId = params['ImageCacheId']
@RequestId = params['RequestId']
end
end
# CreatePrometheusAlertPolicy请求参数结构体
class CreatePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertRule: 告警配置
# @type AlertRule: :class:`Tencentcloud::Tke.v20180525.models.PrometheusAlertPolicyItem`
attr_accessor :InstanceId, :AlertRule
def initialize(instanceid=nil, alertrule=nil)
@InstanceId = instanceid
@AlertRule = alertrule
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['AlertRule'].nil?
@AlertRule = PrometheusAlertPolicyItem.new
@AlertRule.deserialize(params['AlertRule'])
end
end
end
# CreatePrometheusAlertPolicy返回参数结构体
class CreatePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel
# @param Id: 告警id
# @type Id: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreatePrometheusAlertRule请求参数结构体
class CreatePrometheusAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertRule: 告警配置
# @type AlertRule: :class:`Tencentcloud::Tke.v20180525.models.PrometheusAlertRuleDetail`
attr_accessor :InstanceId, :AlertRule
def initialize(instanceid=nil, alertrule=nil)
@InstanceId = instanceid
@AlertRule = alertrule
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['AlertRule'].nil?
@AlertRule = PrometheusAlertRuleDetail.new
@AlertRule.deserialize(params['AlertRule'])
end
end
end
# CreatePrometheusAlertRule返回参数结构体
class CreatePrometheusAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param Id: 告警id
# @type Id: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreatePrometheusDashboard请求参数结构体
class CreatePrometheusDashboardRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param DashboardName: 面板组名称
# @type DashboardName: String
# @param Contents: 面板列表
# 每一项是一个grafana dashboard的json定义
# @type Contents: Array
attr_accessor :InstanceId, :DashboardName, :Contents
def initialize(instanceid=nil, dashboardname=nil, contents=nil)
@InstanceId = instanceid
@DashboardName = dashboardname
@Contents = contents
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DashboardName = params['DashboardName']
@Contents = params['Contents']
end
end
# CreatePrometheusDashboard返回参数结构体
class CreatePrometheusDashboardResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreatePrometheusGlobalNotification请求参数结构体
class CreatePrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Notification: 告警通知渠道
# @type Notification: :class:`Tencentcloud::Tke.v20180525.models.PrometheusNotificationItem`
attr_accessor :InstanceId, :Notification
def initialize(instanceid=nil, notification=nil)
@InstanceId = instanceid
@Notification = notification
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Notification'].nil?
@Notification = PrometheusNotificationItem.new
@Notification.deserialize(params['Notification'])
end
end
end
# CreatePrometheusGlobalNotification返回参数结构体
class CreatePrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel
# @param Id: 全局告警通知渠道ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Id: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreatePrometheusTemp请求参数结构体
class CreatePrometheusTempRequest < TencentCloud::Common::AbstractModel
# @param Template: 模板设置
# @type Template: :class:`Tencentcloud::Tke.v20180525.models.PrometheusTemp`
attr_accessor :Template
def initialize(template=nil)
@Template = template
end
def deserialize(params)
unless params['Template'].nil?
@Template = PrometheusTemp.new
@Template.deserialize(params['Template'])
end
end
end
# CreatePrometheusTemp返回参数结构体
class CreatePrometheusTempResponse < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板Id
# @type TemplateId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TemplateId, :RequestId
def initialize(templateid=nil, requestid=nil)
@TemplateId = templateid
@RequestId = requestid
end
def deserialize(params)
@TemplateId = params['TemplateId']
@RequestId = params['RequestId']
end
end
# CreatePrometheusTemplate请求参数结构体
class CreatePrometheusTemplateRequest < TencentCloud::Common::AbstractModel
# @param Template: 模板设置
# @type Template: :class:`Tencentcloud::Tke.v20180525.models.PrometheusTemplate`
attr_accessor :Template
def initialize(template=nil)
@Template = template
end
def deserialize(params)
unless params['Template'].nil?
@Template = PrometheusTemplate.new
@Template.deserialize(params['Template'])
end
end
end
# CreatePrometheusTemplate返回参数结构体
class CreatePrometheusTemplateResponse < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板Id
# @type TemplateId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TemplateId, :RequestId
def initialize(templateid=nil, requestid=nil)
@TemplateId = templateid
@RequestId = requestid
end
def deserialize(params)
@TemplateId = params['TemplateId']
@RequestId = params['RequestId']
end
end
# CreateTKEEdgeCluster请求参数结构体
class CreateTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
# @param K8SVersion: k8s版本号
# @type K8SVersion: String
# @param VpcId: vpc 的Id
# @type VpcId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param PodCIDR: 集群pod cidr
# @type PodCIDR: String
# @param ServiceCIDR: 集群service cidr
# @type ServiceCIDR: String
# @param ClusterDesc: 集群描述信息
# @type ClusterDesc: String
# @param ClusterAdvancedSettings: 集群高级设置
# @type ClusterAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterAdvancedSettings`
# @param MaxNodePodNum: 节点上最大Pod数量
# @type MaxNodePodNum: Integer
# @param PublicLB: 边缘计算集群公网访问LB信息
# @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
attr_accessor :K8SVersion, :VpcId, :ClusterName, :PodCIDR, :ServiceCIDR, :ClusterDesc, :ClusterAdvancedSettings, :MaxNodePodNum, :PublicLB
def initialize(k8sversion=nil, vpcid=nil, clustername=nil, podcidr=nil, servicecidr=nil, clusterdesc=nil, clusteradvancedsettings=nil, maxnodepodnum=nil, publiclb=nil)
@K8SVersion = k8sversion
@VpcId = vpcid
@ClusterName = clustername
@PodCIDR = podcidr
@ServiceCIDR = servicecidr
@ClusterDesc = clusterdesc
@ClusterAdvancedSettings = clusteradvancedsettings
@MaxNodePodNum = maxnodepodnum
@PublicLB = publiclb
end
def deserialize(params)
@K8SVersion = params['K8SVersion']
@VpcId = params['VpcId']
@ClusterName = params['ClusterName']
@PodCIDR = params['PodCIDR']
@ServiceCIDR = params['ServiceCIDR']
@ClusterDesc = params['ClusterDesc']
unless params['ClusterAdvancedSettings'].nil?
@ClusterAdvancedSettings = EdgeClusterAdvancedSettings.new
@ClusterAdvancedSettings.deserialize(params['ClusterAdvancedSettings'])
end
@MaxNodePodNum = params['MaxNodePodNum']
unless params['PublicLB'].nil?
@PublicLB = EdgeClusterPublicLB.new
@PublicLB.deserialize(params['PublicLB'])
end
end
end
# CreateTKEEdgeCluster返回参数结构体
class CreateTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
# @param ClusterId: 边缘计算集群Id
# @type ClusterId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterId, :RequestId
def initialize(clusterid=nil, requestid=nil)
@ClusterId = clusterid
@RequestId = requestid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@RequestId = params['RequestId']
end
end
# 自定义DNS配置
class DNSConfig < TencentCloud::Common::AbstractModel
# @param Nameservers: DNS 服务器IP地址列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Nameservers: Array
# @param Searches: DNS搜索域列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Searches: Array
# @param Options: 对象选项列表，每个对象由name和value（可选）构成
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Options: Array
attr_accessor :Nameservers, :Searches, :Options
def initialize(nameservers=nil, searches=nil, options=nil)
@Nameservers = nameservers
@Searches = searches
@Options = options
end
def deserialize(params)
@Nameservers = params['Nameservers']
@Searches = params['Searches']
unless params['Options'].nil?
@Options = []
params['Options'].each do |i|
dnsconfigoption_tmp = DNSConfigOption.new
dnsconfigoption_tmp.deserialize(i)
@Options << dnsconfigoption_tmp
end
end
end
end
# DNS配置选项
class DNSConfigOption < TencentCloud::Common::AbstractModel
# @param Name: 配置项名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Value: 项值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 描述了k8s节点数据盘相关配置与信息。
class DataDisk < TencentCloud::Common::AbstractModel
# @param DiskType: 云盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiskType: String
# @param FileSystem: 文件系统(ext3/ext4/xfs)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileSystem: String
# @param DiskSize: 云盘大小(G）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiskSize: Integer
# @param AutoFormatAndMount: 是否自动化格式盘并挂载
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoFormatAndMount: Boolean
# @param MountTarget: 挂载目录
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MountTarget: String
# @param DiskPartition: 挂载设备名或分区名，当且仅当添加已有节点时需要
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiskPartition: String
attr_accessor :DiskType, :FileSystem, :DiskSize, :AutoFormatAndMount, :MountTarget, :DiskPartition
def initialize(disktype=nil, filesystem=nil, disksize=nil, autoformatandmount=nil, mounttarget=nil, diskpartition=nil)
@DiskType = disktype
@FileSystem = filesystem
@DiskSize = disksize
@AutoFormatAndMount = autoformatandmount
@MountTarget = mounttarget
@DiskPartition = diskpartition
end
def deserialize(params)
@DiskType = params['DiskType']
@FileSystem = params['FileSystem']
@DiskSize = params['DiskSize']
@AutoFormatAndMount = params['AutoFormatAndMount']
@MountTarget = params['MountTarget']
@DiskPartition = params['DiskPartition']
end
end
# DeleteClusterAsGroups请求参数结构体
class DeleteClusterAsGroupsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID，通过[DescribeClusters](https://cloud.tencent.com/document/api/457/31862)接口获取。
# @type ClusterId: String
# @param AutoScalingGroupIds: 集群伸缩组ID的列表
# @type AutoScalingGroupIds: Array
# @param KeepInstance: 是否保留伸缩组中的节点(默认值： false(不保留))
# @type KeepInstance: Boolean
attr_accessor :ClusterId, :AutoScalingGroupIds, :KeepInstance
def initialize(clusterid=nil, autoscalinggroupids=nil, keepinstance=nil)
@ClusterId = clusterid
@AutoScalingGroupIds = autoscalinggroupids
@KeepInstance = keepinstance
end
def deserialize(params)
@ClusterId = params['ClusterId']
@AutoScalingGroupIds = params['AutoScalingGroupIds']
@KeepInstance = params['KeepInstance']
end
end
# DeleteClusterAsGroups返回参数结构体
class DeleteClusterAsGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteClusterEndpoint请求参数结构体
class DeleteClusterEndpointRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param IsExtranet: 是否为外网访问（TRUE 外网访问 FALSE 内网访问，默认值： FALSE）
# @type IsExtranet: Boolean
attr_accessor :ClusterId, :IsExtranet
def initialize(clusterid=nil, isextranet=nil)
@ClusterId = clusterid
@IsExtranet = isextranet
end
def deserialize(params)
@ClusterId = params['ClusterId']
@IsExtranet = params['IsExtranet']
end
end
# DeleteClusterEndpoint返回参数结构体
class DeleteClusterEndpointResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteClusterEndpointVip请求参数结构体
class DeleteClusterEndpointVipRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DeleteClusterEndpointVip返回参数结构体
class DeleteClusterEndpointVipResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteClusterInstances请求参数结构体
class DeleteClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 主机InstanceId列表
# @type InstanceIds: Array
# @param InstanceDeleteMode: 集群实例删除时的策略：terminate（销毁实例，仅支持按量计费云主机实例） retain （仅移除，保留实例）
# @type InstanceDeleteMode: String
# @param ForceDelete: 是否强制删除(当节点在初始化时，可以指定参数为TRUE)
# @type ForceDelete: Boolean
attr_accessor :ClusterId, :InstanceIds, :InstanceDeleteMode, :ForceDelete
def initialize(clusterid=nil, instanceids=nil, instancedeletemode=nil, forcedelete=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@InstanceDeleteMode = instancedeletemode
@ForceDelete = forcedelete
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
@InstanceDeleteMode = params['InstanceDeleteMode']
@ForceDelete = params['ForceDelete']
end
end
# DeleteClusterInstances返回参数结构体
class DeleteClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param SuccInstanceIds: 删除成功的实例ID列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SuccInstanceIds: Array
# @param FailedInstanceIds: 删除失败的实例ID列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedInstanceIds: Array
# @param NotFoundInstanceIds: 未匹配到的实例ID列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotFoundInstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SuccInstanceIds, :FailedInstanceIds, :NotFoundInstanceIds, :RequestId
def initialize(succinstanceids=nil, failedinstanceids=nil, notfoundinstanceids=nil, requestid=nil)
@SuccInstanceIds = succinstanceids
@FailedInstanceIds = failedinstanceids
@NotFoundInstanceIds = notfoundinstanceids
@RequestId = requestid
end
def deserialize(params)
@SuccInstanceIds = params['SuccInstanceIds']
@FailedInstanceIds = params['FailedInstanceIds']
@NotFoundInstanceIds = params['NotFoundInstanceIds']
@RequestId = params['RequestId']
end
end
# DeleteClusterNodePool请求参数结构体
class DeleteClusterNodePoolRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 节点池对应的 ClusterId
# @type ClusterId: String
# @param NodePoolIds: 需要删除的节点池 Id 列表
# @type NodePoolIds: Array
# @param KeepInstance: 删除节点池时是否保留节点池内节点(节点仍然会被移出集群，但对应的实例不会被销毁)
# @type KeepInstance: Boolean
attr_accessor :ClusterId, :NodePoolIds, :KeepInstance
def initialize(clusterid=nil, nodepoolids=nil, keepinstance=nil)
@ClusterId = clusterid
@NodePoolIds = nodepoolids
@KeepInstance = keepinstance
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolIds = params['NodePoolIds']
@KeepInstance = params['KeepInstance']
end
end
# DeleteClusterNodePool返回参数结构体
class DeleteClusterNodePoolResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteCluster请求参数结构体
class DeleteClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceDeleteMode: 集群实例删除时的策略：terminate（销毁实例，仅支持按量计费云主机实例） retain （仅移除，保留实例）
# @type InstanceDeleteMode: String
# @param ResourceDeleteOptions: 集群删除时资源的删除策略，目前支持CBS（默认保留CBS）
# @type ResourceDeleteOptions: Array
attr_accessor :ClusterId, :InstanceDeleteMode, :ResourceDeleteOptions
def initialize(clusterid=nil, instancedeletemode=nil, resourcedeleteoptions=nil)
@ClusterId = clusterid
@InstanceDeleteMode = instancedeletemode
@ResourceDeleteOptions = resourcedeleteoptions
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceDeleteMode = params['InstanceDeleteMode']
unless params['ResourceDeleteOptions'].nil?
@ResourceDeleteOptions = []
params['ResourceDeleteOptions'].each do |i|
resourcedeleteoption_tmp = ResourceDeleteOption.new
resourcedeleteoption_tmp.deserialize(i)
@ResourceDeleteOptions << resourcedeleteoption_tmp
end
end
end
end
# DeleteCluster返回参数结构体
class DeleteClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteClusterRoute请求参数结构体
class DeleteClusterRouteRequest < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param GatewayIp: 下一跳地址。
# @type GatewayIp: String
# @param DestinationCidrBlock: 目的端CIDR。
# @type DestinationCidrBlock: String
attr_accessor :RouteTableName, :GatewayIp, :DestinationCidrBlock
def initialize(routetablename=nil, gatewayip=nil, destinationcidrblock=nil)
@RouteTableName = routetablename
@GatewayIp = gatewayip
@DestinationCidrBlock = destinationcidrblock
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
@GatewayIp = params['GatewayIp']
@DestinationCidrBlock = params['DestinationCidrBlock']
end
end
# DeleteClusterRoute返回参数结构体
class DeleteClusterRouteResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteClusterRouteTable请求参数结构体
class DeleteClusterRouteTableRequest < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称
# @type RouteTableName: String
attr_accessor :RouteTableName
def initialize(routetablename=nil)
@RouteTableName = routetablename
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
end
end
# DeleteClusterRouteTable返回参数结构体
class DeleteClusterRouteTableResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteECMInstances请求参数结构体
class DeleteECMInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群ID
# @type ClusterID: String
# @param EcmIdSet: ecm id集合
# @type EcmIdSet: Array
attr_accessor :ClusterID, :EcmIdSet
def initialize(clusterid=nil, ecmidset=nil)
@ClusterID = clusterid
@EcmIdSet = ecmidset
end
def deserialize(params)
@ClusterID = params['ClusterID']
@EcmIdSet = params['EcmIdSet']
end
end
# DeleteECMInstances返回参数结构体
class DeleteECMInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteEKSCluster请求参数结构体
class DeleteEKSClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 弹性集群Id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DeleteEKSCluster返回参数结构体
class DeleteEKSClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteEKSContainerInstances请求参数结构体
class DeleteEKSContainerInstancesRequest < TencentCloud::Common::AbstractModel
# @param EksCiIds: 需要删除的EksCi的Id。 最大数量不超过20
# @type EksCiIds: Array
# @param ReleaseAutoCreatedEip: 是否释放为EksCi自动创建的Eip
# @type ReleaseAutoCreatedEip: Boolean
attr_accessor :EksCiIds, :ReleaseAutoCreatedEip
def initialize(eksciids=nil, releaseautocreatedeip=nil)
@EksCiIds = eksciids
@ReleaseAutoCreatedEip = releaseautocreatedeip
end
def deserialize(params)
@EksCiIds = params['EksCiIds']
@ReleaseAutoCreatedEip = params['ReleaseAutoCreatedEip']
end
end
# DeleteEKSContainerInstances返回参数结构体
class DeleteEKSContainerInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteEdgeCVMInstances请求参数结构体
class DeleteEdgeCVMInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群ID
# @type ClusterID: String
# @param CvmIdSet: cvm id集合
# @type CvmIdSet: Array
attr_accessor :ClusterID, :CvmIdSet
def initialize(clusterid=nil, cvmidset=nil)
@ClusterID = clusterid
@CvmIdSet = cvmidset
end
def deserialize(params)
@ClusterID = params['ClusterID']
@CvmIdSet = params['CvmIdSet']
end
end
# DeleteEdgeCVMInstances返回参数结构体
class DeleteEdgeCVMInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteEdgeClusterInstances请求参数结构体
class DeleteEdgeClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 待删除实例ID数组
# @type InstanceIds: Array
attr_accessor :ClusterId, :InstanceIds
def initialize(clusterid=nil, instanceids=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
end
end
# DeleteEdgeClusterInstances返回参数结构体
class DeleteEdgeClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteImageCaches请求参数结构体
class DeleteImageCachesRequest < TencentCloud::Common::AbstractModel
# @param ImageCacheIds: 镜像缓存Id数组
# @type ImageCacheIds: Array
attr_accessor :ImageCacheIds
def initialize(imagecacheids=nil)
@ImageCacheIds = imagecacheids
end
def deserialize(params)
@ImageCacheIds = params['ImageCacheIds']
end
end
# DeleteImageCaches返回参数结构体
class DeleteImageCachesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusAlertPolicy请求参数结构体
class DeletePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertIds: 告警策略id列表
# @type AlertIds: Array
# @param Names: 告警策略名称
# @type Names: Array
attr_accessor :InstanceId, :AlertIds, :Names
def initialize(instanceid=nil, alertids=nil, names=nil)
@InstanceId = instanceid
@AlertIds = alertids
@Names = names
end
def deserialize(params)
@InstanceId = params['InstanceId']
@AlertIds = params['AlertIds']
@Names = params['Names']
end
end
# DeletePrometheusAlertPolicy返回参数结构体
class DeletePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusAlertRule请求参数结构体
class DeletePrometheusAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertIds: 告警规则id列表
# @type AlertIds: Array
attr_accessor :InstanceId, :AlertIds
def initialize(instanceid=nil, alertids=nil)
@InstanceId = instanceid
@AlertIds = alertids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@AlertIds = params['AlertIds']
end
end
# DeletePrometheusAlertRule返回参数结构体
class DeletePrometheusAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusTemp请求参数结构体
class DeletePrometheusTempRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板id
# @type TemplateId: String
attr_accessor :TemplateId
def initialize(templateid=nil)
@TemplateId = templateid
end
def deserialize(params)
@TemplateId = params['TemplateId']
end
end
# DeletePrometheusTemp返回参数结构体
class DeletePrometheusTempResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusTempSync请求参数结构体
class DeletePrometheusTempSyncRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板id
# @type TemplateId: String
# @param Targets: 取消同步的对象列表
# @type Targets: Array
attr_accessor :TemplateId, :Targets
def initialize(templateid=nil, targets=nil)
@TemplateId = templateid
@Targets = targets
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
end
end
# DeletePrometheusTempSync返回参数结构体
class DeletePrometheusTempSyncResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusTemplate请求参数结构体
class DeletePrometheusTemplateRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板id
# @type TemplateId: String
attr_accessor :TemplateId
def initialize(templateid=nil)
@TemplateId = templateid
end
def deserialize(params)
@TemplateId = params['TemplateId']
end
end
# DeletePrometheusTemplate返回参数结构体
class DeletePrometheusTemplateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePrometheusTemplateSync请求参数结构体
class DeletePrometheusTemplateSyncRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板id
# @type TemplateId: String
# @param Targets: 取消同步的对象列表
# @type Targets: Array
attr_accessor :TemplateId, :Targets
def initialize(templateid=nil, targets=nil)
@TemplateId = templateid
@Targets = targets
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
end
end
# DeletePrometheusTemplateSync返回参数结构体
class DeletePrometheusTemplateSyncResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteTKEEdgeCluster请求参数结构体
class DeleteTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DeleteTKEEdgeCluster返回参数结构体
class DeleteTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAvailableClusterVersion请求参数结构体
class DescribeAvailableClusterVersionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 Id
# @type ClusterId: String
# @param ClusterIds: 集群 Id 列表
# @type ClusterIds: Array
attr_accessor :ClusterId, :ClusterIds
def initialize(clusterid=nil, clusterids=nil)
@ClusterId = clusterid
@ClusterIds = clusterids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterIds = params['ClusterIds']
end
end
# DescribeAvailableClusterVersion返回参数结构体
class DescribeAvailableClusterVersionResponse < TencentCloud::Common::AbstractModel
# @param Versions: 可升级的集群版本号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Versions: Array
# @param Clusters: 集群信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Clusters: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Versions, :Clusters, :RequestId
def initialize(versions=nil, clusters=nil, requestid=nil)
@Versions = versions
@Clusters = clusters
@RequestId = requestid
end
def deserialize(params)
@Versions = params['Versions']
unless params['Clusters'].nil?
@Clusters = []
params['Clusters'].each do |i|
clusterversion_tmp = ClusterVersion.new
clusterversion_tmp.deserialize(i)
@Clusters << clusterversion_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAvailableTKEEdgeVersion请求参数结构体
class DescribeAvailableTKEEdgeVersionRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAvailableTKEEdgeVersion返回参数结构体
class DescribeAvailableTKEEdgeVersionResponse < TencentCloud::Common::AbstractModel
# @param Versions: 版本列表
# @type Versions: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Versions, :RequestId
def initialize(versions=nil, requestid=nil)
@Versions = versions
@RequestId = requestid
end
def deserialize(params)
@Versions = params['Versions']
@RequestId = params['RequestId']
end
end
# DescribeClusterAsGroupOption请求参数结构体
class DescribeClusterAsGroupOptionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterAsGroupOption返回参数结构体
class DescribeClusterAsGroupOptionResponse < TencentCloud::Common::AbstractModel
# @param ClusterAsGroupOption: 集群弹性伸缩属性
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterAsGroupOption: :class:`Tencentcloud::Tke.v20180525.models.ClusterAsGroupOption`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterAsGroupOption, :RequestId
def initialize(clusterasgroupoption=nil, requestid=nil)
@ClusterAsGroupOption = clusterasgroupoption
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterAsGroupOption'].nil?
@ClusterAsGroupOption = ClusterAsGroupOption.new
@ClusterAsGroupOption.deserialize(params['ClusterAsGroupOption'])
end
@RequestId = params['RequestId']
end
end
# DescribeClusterAsGroups请求参数结构体
class DescribeClusterAsGroupsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param AutoScalingGroupIds: 伸缩组ID列表，如果为空，表示拉取集群关联的所有伸缩组。
# @type AutoScalingGroupIds: Array
# @param Offset: 偏移量，默认为0。关于Offset的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于Limit的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
attr_accessor :ClusterId, :AutoScalingGroupIds, :Offset, :Limit
def initialize(clusterid=nil, autoscalinggroupids=nil, offset=nil, limit=nil)
@ClusterId = clusterid
@AutoScalingGroupIds = autoscalinggroupids
@Offset = offset
@Limit = limit
end
def deserialize(params)
@ClusterId = params['ClusterId']
@AutoScalingGroupIds = params['AutoScalingGroupIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeClusterAsGroups返回参数结构体
class DescribeClusterAsGroupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群关联的伸缩组总数
# @type TotalCount: Integer
# @param ClusterAsGroupSet: 集群关联的伸缩组列表
# @type ClusterAsGroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ClusterAsGroupSet, :RequestId
def initialize(totalcount=nil, clusterasgroupset=nil, requestid=nil)
@TotalCount = totalcount
@ClusterAsGroupSet = clusterasgroupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ClusterAsGroupSet'].nil?
@ClusterAsGroupSet = []
params['ClusterAsGroupSet'].each do |i|
clusterasgroup_tmp = ClusterAsGroup.new
clusterasgroup_tmp.deserialize(i)
@ClusterAsGroupSet << clusterasgroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterAuthenticationOptions请求参数结构体
class DescribeClusterAuthenticationOptionsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterAuthenticationOptions返回参数结构体
class DescribeClusterAuthenticationOptionsResponse < TencentCloud::Common::AbstractModel
# @param ServiceAccounts: ServiceAccount认证配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceAccounts: :class:`Tencentcloud::Tke.v20180525.models.ServiceAccountAuthenticationOptions`
# @param LatestOperationState: 最近一次修改操作结果，返回值可能为：Updating，Success，Failed，TimeOut
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperationState: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceAccounts, :LatestOperationState, :RequestId
def initialize(serviceaccounts=nil, latestoperationstate=nil, requestid=nil)
@ServiceAccounts = serviceaccounts
@LatestOperationState = latestoperationstate
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceAccounts'].nil?
@ServiceAccounts = ServiceAccountAuthenticationOptions.new
@ServiceAccounts.deserialize(params['ServiceAccounts'])
end
@LatestOperationState = params['LatestOperationState']
@RequestId = params['RequestId']
end
end
# DescribeClusterCommonNames请求参数结构体
class DescribeClusterCommonNamesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SubaccountUins: 子账户列表，不可超出最大值50
# @type SubaccountUins: Array
# @param RoleIds: 角色ID列表，不可超出最大值50
# @type RoleIds: Array
attr_accessor :ClusterId, :SubaccountUins, :RoleIds
def initialize(clusterid=nil, subaccountuins=nil, roleids=nil)
@ClusterId = clusterid
@SubaccountUins = subaccountuins
@RoleIds = roleids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SubaccountUins = params['SubaccountUins']
@RoleIds = params['RoleIds']
end
end
# DescribeClusterCommonNames返回参数结构体
class DescribeClusterCommonNamesResponse < TencentCloud::Common::AbstractModel
# @param CommonNames: 子账户Uin与其客户端证书的CN字段映射
# @type CommonNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CommonNames, :RequestId
def initialize(commonnames=nil, requestid=nil)
@CommonNames = commonnames
@RequestId = requestid
end
def deserialize(params)
unless params['CommonNames'].nil?
@CommonNames = []
params['CommonNames'].each do |i|
commonname_tmp = CommonName.new
commonname_tmp.deserialize(i)
@CommonNames << commonname_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterControllers请求参数结构体
class DescribeClusterControllersRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterControllers返回参数结构体
class DescribeClusterControllersResponse < TencentCloud::Common::AbstractModel
# @param ControllerStatusSet: 描述集群中各个控制器的状态
# @type ControllerStatusSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ControllerStatusSet, :RequestId
def initialize(controllerstatusset=nil, requestid=nil)
@ControllerStatusSet = controllerstatusset
@RequestId = requestid
end
def deserialize(params)
unless params['ControllerStatusSet'].nil?
@ControllerStatusSet = []
params['ControllerStatusSet'].each do |i|
controllerstatus_tmp = ControllerStatus.new
controllerstatus_tmp.deserialize(i)
@ControllerStatusSet << controllerstatus_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterEndpointStatus请求参数结构体
class DescribeClusterEndpointStatusRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param IsExtranet: 是否为外网访问（TRUE 外网访问 FALSE 内网访问，默认值： FALSE）
# @type IsExtranet: Boolean
attr_accessor :ClusterId, :IsExtranet
def initialize(clusterid=nil, isextranet=nil)
@ClusterId = clusterid
@IsExtranet = isextranet
end
def deserialize(params)
@ClusterId = params['ClusterId']
@IsExtranet = params['IsExtranet']
end
end
# DescribeClusterEndpointStatus返回参数结构体
class DescribeClusterEndpointStatusResponse < TencentCloud::Common::AbstractModel
# @param Status: 查询集群访问端口状态（Created 开启成功，Creating 开启中，NotFound 未开启）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: String
# @param ErrorMsg: 开启访问入口失败信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ErrorMsg: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :ErrorMsg, :RequestId
def initialize(status=nil, errormsg=nil, requestid=nil)
@Status = status
@ErrorMsg = errormsg
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@ErrorMsg = params['ErrorMsg']
@RequestId = params['RequestId']
end
end
# DescribeClusterEndpointVipStatus请求参数结构体
class DescribeClusterEndpointVipStatusRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterEndpointVipStatus返回参数结构体
class DescribeClusterEndpointVipStatusResponse < TencentCloud::Common::AbstractModel
# @param Status: 端口操作状态 (Creating 创建中 CreateFailed 创建失败 Created 创建完成 Deleting 删除中 DeletedFailed 删除失败 Deleted 已删除 NotFound 未发现操作 )
# @type Status: String
# @param ErrorMsg: 操作失败的原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ErrorMsg: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :ErrorMsg, :RequestId
def initialize(status=nil, errormsg=nil, requestid=nil)
@Status = status
@ErrorMsg = errormsg
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@ErrorMsg = params['ErrorMsg']
@RequestId = params['RequestId']
end
end
# DescribeClusterInstances请求参数结构体
class DescribeClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Offset: 偏移量，默认为0。关于Offset的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于Limit的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
# @param InstanceIds: 需要获取的节点实例Id列表。如果为空，表示拉取集群下所有节点实例。
# @type InstanceIds: Array
# @param InstanceRole: 节点角色, MASTER, WORKER, ETCD, MASTER_ETCD,ALL, 默认为WORKER。默认为WORKER类型。
# @type InstanceRole: String
# @param Filters: 过滤条件列表；Name的可选值为nodepool-id、nodepool-instance-type；Name为nodepool-id表示根据节点池id过滤机器，Value的值为具体的节点池id，Name为nodepool-instance-type表示节点加入节点池的方式，Value的值为MANUALLY_ADDED（手动加入节点池）、AUTOSCALING_ADDED（伸缩组扩容方式加入节点池）、ALL（手动加入节点池 和 伸缩组扩容方式加入节点池）
# @type Filters: Array
attr_accessor :ClusterId, :Offset, :Limit, :InstanceIds, :InstanceRole, :Filters
def initialize(clusterid=nil, offset=nil, limit=nil, instanceids=nil, instancerole=nil, filters=nil)
@ClusterId = clusterid
@Offset = offset
@Limit = limit
@InstanceIds = instanceids
@InstanceRole = instancerole
@Filters = filters
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Offset = params['Offset']
@Limit = params['Limit']
@InstanceIds = params['InstanceIds']
@InstanceRole = params['InstanceRole']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeClusterInstances返回参数结构体
class DescribeClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群中实例总数
# @type TotalCount: Integer
# @param InstanceSet: 集群中实例列表
# @type InstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceSet, :RequestId
def initialize(totalcount=nil, instanceset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceSet = instanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
instance_tmp = Instance.new
instance_tmp.deserialize(i)
@InstanceSet << instance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterKubeconfig请求参数结构体
class DescribeClusterKubeconfigRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param IsExtranet: 默认false 获取内网，是否获取外网访问的kubeconfig
# @type IsExtranet: Boolean
attr_accessor :ClusterId, :IsExtranet
def initialize(clusterid=nil, isextranet=nil)
@ClusterId = clusterid
@IsExtranet = isextranet
end
def deserialize(params)
@ClusterId = params['ClusterId']
@IsExtranet = params['IsExtranet']
end
end
# DescribeClusterKubeconfig返回参数结构体
class DescribeClusterKubeconfigResponse < TencentCloud::Common::AbstractModel
# @param Kubeconfig: 子账户kubeconfig文件，可用于直接访问集群kube-apiserver
# @type Kubeconfig: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Kubeconfig, :RequestId
def initialize(kubeconfig=nil, requestid=nil)
@Kubeconfig = kubeconfig
@RequestId = requestid
end
def deserialize(params)
@Kubeconfig = params['Kubeconfig']
@RequestId = params['RequestId']
end
end
# DescribeClusterLevelAttribute请求参数结构体
class DescribeClusterLevelAttributeRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群ID，变配时使用
# @type ClusterID: String
attr_accessor :ClusterID
def initialize(clusterid=nil)
@ClusterID = clusterid
end
def deserialize(params)
@ClusterID = params['ClusterID']
end
end
# DescribeClusterLevelAttribute返回参数结构体
class DescribeClusterLevelAttributeResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 总数
# @type TotalCount: Integer
# @param Items: 集群规模
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
clusterlevelattribute_tmp = ClusterLevelAttribute.new
clusterlevelattribute_tmp.deserialize(i)
@Items << clusterlevelattribute_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterLevelChangeRecords请求参数结构体
class DescribeClusterLevelChangeRecordsRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群ID
# @type ClusterID: String
# @param StartAt: 开始时间
# @type StartAt: String
# @param EndAt: 结束时间
# @type EndAt: String
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Limit: 最大输出条数，默认20
# @type Limit: Integer
attr_accessor :ClusterID, :StartAt, :EndAt, :Offset, :Limit
def initialize(clusterid=nil, startat=nil, endat=nil, offset=nil, limit=nil)
@ClusterID = clusterid
@StartAt = startat
@EndAt = endat
@Offset = offset
@Limit = limit
end
def deserialize(params)
@ClusterID = params['ClusterID']
@StartAt = params['StartAt']
@EndAt = params['EndAt']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeClusterLevelChangeRecords返回参数结构体
class DescribeClusterLevelChangeRecordsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 总数
# @type TotalCount: Integer
# @param Items: 集群规模
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
clusterlevelchangerecord_tmp = ClusterLevelChangeRecord.new
clusterlevelchangerecord_tmp.deserialize(i)
@Items << clusterlevelchangerecord_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterNodePoolDetail请求参数结构体
class DescribeClusterNodePoolDetailRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
attr_accessor :ClusterId, :NodePoolId
def initialize(clusterid=nil, nodepoolid=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
end
end
# DescribeClusterNodePoolDetail返回参数结构体
class DescribeClusterNodePoolDetailResponse < TencentCloud::Common::AbstractModel
# @param NodePool: 节点池详情
# @type NodePool: :class:`Tencentcloud::Tke.v20180525.models.NodePool`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NodePool, :RequestId
def initialize(nodepool=nil, requestid=nil)
@NodePool = nodepool
@RequestId = requestid
end
def deserialize(params)
unless params['NodePool'].nil?
@NodePool = NodePool.new
@NodePool.deserialize(params['NodePool'])
end
@RequestId = params['RequestId']
end
end
# DescribeClusterNodePools请求参数结构体
class DescribeClusterNodePoolsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: ClusterId（集群id）
# @type ClusterId: String
# @param Filters: · NodePoolsName
# 按照【节点池名】进行过滤。
# 类型：String
# 必选：否
# · NodePoolsId
# 按照【节点池id】进行过滤。
# 类型：String
# 必选：否
# · tags
# 按照【标签键值对】进行过滤。
# 类型：String
# 必选：否
# · tag:tag-key
# 按照【标签键值对】进行过滤。
# 类型：String
# 必选：否
# @type Filters: Array
attr_accessor :ClusterId, :Filters
def initialize(clusterid=nil, filters=nil)
@ClusterId = clusterid
@Filters = filters
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeClusterNodePools返回参数结构体
class DescribeClusterNodePoolsResponse < TencentCloud::Common::AbstractModel
# @param NodePoolSet: NodePools（节点池列表）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodePoolSet: Array
# @param TotalCount: 资源总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NodePoolSet, :TotalCount, :RequestId
def initialize(nodepoolset=nil, totalcount=nil, requestid=nil)
@NodePoolSet = nodepoolset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['NodePoolSet'].nil?
@NodePoolSet = []
params['NodePoolSet'].each do |i|
nodepool_tmp = NodePool.new
nodepool_tmp.deserialize(i)
@NodePoolSet << nodepool_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeClusterRouteTables请求参数结构体
class DescribeClusterRouteTablesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeClusterRouteTables返回参数结构体
class DescribeClusterRouteTablesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RouteTableSet: 集群路由表对象。
# @type RouteTableSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteTableSet, :RequestId
def initialize(totalcount=nil, routetableset=nil, requestid=nil)
@TotalCount = totalcount
@RouteTableSet = routetableset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteTableSet'].nil?
@RouteTableSet = []
params['RouteTableSet'].each do |i|
routetableinfo_tmp = RouteTableInfo.new
routetableinfo_tmp.deserialize(i)
@RouteTableSet << routetableinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterRoutes请求参数结构体
class DescribeClusterRoutesRequest < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param Filters: 过滤条件,当前只支持按照单个条件GatewayIP进行过滤（可选）
# @type Filters: Array
attr_accessor :RouteTableName, :Filters
def initialize(routetablename=nil, filters=nil)
@RouteTableName = routetablename
@Filters = filters
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeClusterRoutes返回参数结构体
class DescribeClusterRoutesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RouteSet: 集群路由对象。
# @type RouteSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RouteSet, :RequestId
def initialize(totalcount=nil, routeset=nil, requestid=nil)
@TotalCount = totalcount
@RouteSet = routeset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RouteSet'].nil?
@RouteSet = []
params['RouteSet'].each do |i|
routeinfo_tmp = RouteInfo.new
routeinfo_tmp.deserialize(i)
@RouteSet << routeinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterSecurity请求参数结构体
class DescribeClusterSecurityRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 ID，请填写 查询集群列表 接口中返回的 clusterId 字段
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterSecurity返回参数结构体
class DescribeClusterSecurityResponse < TencentCloud::Common::AbstractModel
# @param UserName: 集群的账号名称
# @type UserName: String
# @param Password: 集群的访问密码
# @type Password: String
# @param CertificationAuthority: 集群访问CA证书
# @type CertificationAuthority: String
# @param ClusterExternalEndpoint: 集群访问的地址
# @type ClusterExternalEndpoint: String
# @param Domain: 集群访问的域名
# @type Domain: String
# @param PgwEndpoint: 集群Endpoint地址
# @type PgwEndpoint: String
# @param SecurityPolicy: 集群访问策略组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityPolicy: Array
# @param Kubeconfig: 集群Kubeconfig文件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Kubeconfig: String
# @param JnsGwEndpoint: 集群JnsGw的访问地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type JnsGwEndpoint: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :UserName, :Password, :CertificationAuthority, :ClusterExternalEndpoint, :Domain, :PgwEndpoint, :SecurityPolicy, :Kubeconfig, :JnsGwEndpoint, :RequestId
def initialize(username=nil, password=nil, certificationauthority=nil, clusterexternalendpoint=nil, domain=nil, pgwendpoint=nil, securitypolicy=nil, kubeconfig=nil, jnsgwendpoint=nil, requestid=nil)
@UserName = username
@Password = password
@CertificationAuthority = certificationauthority
@ClusterExternalEndpoint = clusterexternalendpoint
@Domain = domain
@PgwEndpoint = pgwendpoint
@SecurityPolicy = securitypolicy
@Kubeconfig = kubeconfig
@JnsGwEndpoint = jnsgwendpoint
@RequestId = requestid
end
def deserialize(params)
@UserName = params['UserName']
@Password = params['Password']
@CertificationAuthority = params['CertificationAuthority']
@ClusterExternalEndpoint = params['ClusterExternalEndpoint']
@Domain = params['Domain']
@PgwEndpoint = params['PgwEndpoint']
@SecurityPolicy = params['SecurityPolicy']
@Kubeconfig = params['Kubeconfig']
@JnsGwEndpoint = params['JnsGwEndpoint']
@RequestId = params['RequestId']
end
end
# DescribeClusterStatus请求参数结构体
class DescribeClusterStatusRequest < TencentCloud::Common::AbstractModel
# @param ClusterIds: 集群ID列表，不传默认拉取所有集群
# @type ClusterIds: Array
attr_accessor :ClusterIds
def initialize(clusterids=nil)
@ClusterIds = clusterids
end
def deserialize(params)
@ClusterIds = params['ClusterIds']
end
end
# DescribeClusterStatus返回参数结构体
class DescribeClusterStatusResponse < TencentCloud::Common::AbstractModel
# @param ClusterStatusSet: 集群状态列表
# @type ClusterStatusSet: Array
# @param TotalCount: 集群个数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterStatusSet, :TotalCount, :RequestId
def initialize(clusterstatusset=nil, totalcount=nil, requestid=nil)
@ClusterStatusSet = clusterstatusset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterStatusSet'].nil?
@ClusterStatusSet = []
params['ClusterStatusSet'].each do |i|
clusterstatus_tmp = ClusterStatus.new
clusterstatus_tmp.deserialize(i)
@ClusterStatusSet << clusterstatus_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeClusters请求参数结构体
class DescribeClustersRequest < TencentCloud::Common::AbstractModel
# @param ClusterIds: 集群ID列表(为空时，
# 表示获取账号下所有集群)
# @type ClusterIds: Array
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Limit: 最大输出条数，默认20，最大为100
# @type Limit: Integer
# @param Filters: · ClusterName
# 按照【集群名】进行过滤。
# 类型：String
# 必选：否
# · ClusterType
# 按照【集群类型】进行过滤。
# 类型：String
# 必选：否
# · ClusterStatus
# 按照【集群状态】进行过滤。
# 类型：String
# 必选：否
# · Tags
# 按照【标签键值对】进行过滤。
# 类型：String
# 必选：否
# · vpc-id
# 按照【VPC】进行过滤。
# 类型：String
# 必选：否
# · tag-key
# 按照【标签键】进行过滤。
# 类型：String
# 必选：否
# · tag-value
# 按照【标签值】进行过滤。
# 类型：String
# 必选：否
# · tag:tag-key
# 按照【标签键值对】进行过滤。
# 类型：String
# 必选：否
# @type Filters: Array
# @param ClusterType: 集群类型，例如：MANAGED_CLUSTER
# @type ClusterType: String
attr_accessor :ClusterIds, :Offset, :Limit, :Filters, :ClusterType
def initialize(clusterids=nil, offset=nil, limit=nil, filters=nil, clustertype=nil)
@ClusterIds = clusterids
@Offset = offset
@Limit = limit
@Filters = filters
@ClusterType = clustertype
end
def deserialize(params)
@ClusterIds = params['ClusterIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@ClusterType = params['ClusterType']
end
end
# DescribeClusters返回参数结构体
class DescribeClustersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群总个数
# @type TotalCount: Integer
# @param Clusters: 集群信息列表
# @type Clusters: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Clusters, :RequestId
def initialize(totalcount=nil, clusters=nil, requestid=nil)
@TotalCount = totalcount
@Clusters = clusters
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Clusters'].nil?
@Clusters = []
params['Clusters'].each do |i|
cluster_tmp = Cluster.new
cluster_tmp.deserialize(i)
@Clusters << cluster_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeECMInstances请求参数结构体
class DescribeECMInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群id
# @type ClusterID: String
# @param Filters: 过滤条件
# 仅支持ecm-id过滤
# @type Filters: Array
attr_accessor :ClusterID, :Filters
def initialize(clusterid=nil, filters=nil)
@ClusterID = clusterid
@Filters = filters
end
def deserialize(params)
@ClusterID = params['ClusterID']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeECMInstances返回参数结构体
class DescribeECMInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例相关信息列表的长度
# @type TotalCount: Integer
# @param InstanceInfoSet: 返回的实例相关信息列表
# @type InstanceInfoSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceInfoSet = instanceinfoset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@InstanceInfoSet = params['InstanceInfoSet']
@RequestId = params['RequestId']
end
end
# DescribeEKSClusterCredential请求参数结构体
class DescribeEKSClusterCredentialRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeEKSClusterCredential返回参数结构体
class DescribeEKSClusterCredentialResponse < TencentCloud::Common::AbstractModel
# @param Addresses: 集群的接入地址信息
# @type Addresses: Array
# @param Credential: 集群的认证信息（token只有请求是主账号才返回，子账户请使用返回的kubeconfig）
# @type Credential: :class:`Tencentcloud::Tke.v20180525.models.ClusterCredential`
# @param PublicLB: 集群的公网访问信息
# @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.ClusterPublicLB`
# @param InternalLB: 集群的内网访问信息
# @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.ClusterInternalLB`
# @param ProxyLB: 标记是否新的内外网功能
# @type ProxyLB: Boolean
# @param Kubeconfig: 连接用户集群k8s 的Config
# @type Kubeconfig: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Addresses, :Credential, :PublicLB, :InternalLB, :ProxyLB, :Kubeconfig, :RequestId
def initialize(addresses=nil, credential=nil, publiclb=nil, internallb=nil, proxylb=nil, kubeconfig=nil, requestid=nil)
@Addresses = addresses
@Credential = credential
@PublicLB = publiclb
@InternalLB = internallb
@ProxyLB = proxylb
@Kubeconfig = kubeconfig
@RequestId = requestid
end
def deserialize(params)
unless params['Addresses'].nil?
@Addresses = []
params['Addresses'].each do |i|
ipaddress_tmp = IPAddress.new
ipaddress_tmp.deserialize(i)
@Addresses << ipaddress_tmp
end
end
unless params['Credential'].nil?
@Credential = ClusterCredential.new
@Credential.deserialize(params['Credential'])
end
unless params['PublicLB'].nil?
@PublicLB = ClusterPublicLB.new
@PublicLB.deserialize(params['PublicLB'])
end
unless params['InternalLB'].nil?
@InternalLB = ClusterInternalLB.new
@InternalLB.deserialize(params['InternalLB'])
end
@ProxyLB = params['ProxyLB']
@Kubeconfig = params['Kubeconfig']
@RequestId = params['RequestId']
end
end
# DescribeEKSClusters请求参数结构体
class DescribeEKSClustersRequest < TencentCloud::Common::AbstractModel
# @param ClusterIds: 集群ID列表(为空时，
# 表示获取账号下所有集群)
# @type ClusterIds: Array
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Limit: 最大输出条数，默认20
# @type Limit: Integer
# @param Filters: 过滤条件,当前只支持按照单个条件ClusterName进行过滤
# @type Filters: Array
attr_accessor :ClusterIds, :Offset, :Limit, :Filters
def initialize(clusterids=nil, offset=nil, limit=nil, filters=nil)
@ClusterIds = clusterids
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@ClusterIds = params['ClusterIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeEKSClusters返回参数结构体
class DescribeEKSClustersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群总个数
# @type TotalCount: Integer
# @param Clusters: 集群信息列表
# @type Clusters: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Clusters, :RequestId
def initialize(totalcount=nil, clusters=nil, requestid=nil)
@TotalCount = totalcount
@Clusters = clusters
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Clusters'].nil?
@Clusters = []
params['Clusters'].each do |i|
ekscluster_tmp = EksCluster.new
ekscluster_tmp.deserialize(i)
@Clusters << ekscluster_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeEKSContainerInstanceEvent请求参数结构体
class DescribeEKSContainerInstanceEventRequest < TencentCloud::Common::AbstractModel
# @param EksCiId: 容器实例id
# @type EksCiId: String
# @param Limit: 最大事件数量。默认为50，最大取值100。
# @type Limit: Integer
attr_accessor :EksCiId, :Limit
def initialize(eksciid=nil, limit=nil)
@EksCiId = eksciid
@Limit = limit
end
def deserialize(params)
@EksCiId = params['EksCiId']
@Limit = params['Limit']
end
end
# DescribeEKSContainerInstanceEvent返回参数结构体
class DescribeEKSContainerInstanceEventResponse < TencentCloud::Common::AbstractModel
# @param Events: 事件集合
# @type Events: Array
# @param EksCiId: 容器实例id
# @type EksCiId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Events, :EksCiId, :RequestId
def initialize(events=nil, eksciid=nil, requestid=nil)
@Events = events
@EksCiId = eksciid
@RequestId = requestid
end
def deserialize(params)
unless params['Events'].nil?
@Events = []
params['Events'].each do |i|
event_tmp = Event.new
event_tmp.deserialize(i)
@Events << event_tmp
end
end
@EksCiId = params['EksCiId']
@RequestId = params['RequestId']
end
end
# DescribeEKSContainerInstanceRegions请求参数结构体
class DescribeEKSContainerInstanceRegionsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeEKSContainerInstanceRegions返回参数结构体
class DescribeEKSContainerInstanceRegionsResponse < TencentCloud::Common::AbstractModel
# @param Regions: EKS Container Instance支持的地域信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Regions: Array
# @param TotalCount: 总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Regions, :TotalCount, :RequestId
def initialize(regions=nil, totalcount=nil, requestid=nil)
@Regions = regions
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['Regions'].nil?
@Regions = []
params['Regions'].each do |i|
eksciregioninfo_tmp = EksCiRegionInfo.new
eksciregioninfo_tmp.deserialize(i)
@Regions << eksciregioninfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeEKSContainerInstances请求参数结构体
class DescribeEKSContainerInstancesRequest < TencentCloud::Common::AbstractModel
# @param Limit: 限定此次返回资源的数量。如果不设定，默认返回20，最大不能超过100
# @type Limit: Integer
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Filters: 过滤条件，可条件：
# (1)实例名称
# KeyName: eks-ci-name
# 类型：String
# (2)实例状态
# KeyName: status
# 类型：String
# 可选值："Pending", "Running", "Succeeded", "Failed"
# (3)内网ip
# KeyName: private-ip
# 类型：String
# (4)EIP地址
# KeyName: eip-address
# 类型：String
# (5)VpcId
# KeyName: vpc-id
# 类型：String
# @type Filters: Array
# @param EksCiIds: 容器实例 ID 数组
# @type EksCiIds: Array
attr_accessor :Limit, :Offset, :Filters, :EksCiIds
def initialize(limit=nil, offset=nil, filters=nil, eksciids=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@EksCiIds = eksciids
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@EksCiIds = params['EksCiIds']
end
end
# DescribeEKSContainerInstances返回参数结构体
class DescribeEKSContainerInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 容器组总数
# @type TotalCount: Integer
# @param EksCis: 容器组列表
# @type EksCis: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :EksCis, :RequestId
def initialize(totalcount=nil, ekscis=nil, requestid=nil)
@TotalCount = totalcount
@EksCis = ekscis
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['EksCis'].nil?
@EksCis = []
params['EksCis'].each do |i|
eksci_tmp = EksCi.new
eksci_tmp.deserialize(i)
@EksCis << eksci_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeEdgeAvailableExtraArgs请求参数结构体
class DescribeEdgeAvailableExtraArgsRequest < TencentCloud::Common::AbstractModel
# @param ClusterVersion: 集群版本
# @type ClusterVersion: String
attr_accessor :ClusterVersion
def initialize(clusterversion=nil)
@ClusterVersion = clusterversion
end
def deserialize(params)
@ClusterVersion = params['ClusterVersion']
end
end
# DescribeEdgeAvailableExtraArgs返回参数结构体
class DescribeEdgeAvailableExtraArgsResponse < TencentCloud::Common::AbstractModel
# @param ClusterVersion: 集群版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterVersion: String
# @param AvailableExtraArgs: 可用的自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AvailableExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeAvailableExtraArgs`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterVersion, :AvailableExtraArgs, :RequestId
def initialize(clusterversion=nil, availableextraargs=nil, requestid=nil)
@ClusterVersion = clusterversion
@AvailableExtraArgs = availableextraargs
@RequestId = requestid
end
def deserialize(params)
@ClusterVersion = params['ClusterVersion']
unless params['AvailableExtraArgs'].nil?
@AvailableExtraArgs = EdgeAvailableExtraArgs.new
@AvailableExtraArgs.deserialize(params['AvailableExtraArgs'])
end
@RequestId = params['RequestId']
end
end
# DescribeEdgeCVMInstances请求参数结构体
class DescribeEdgeCVMInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群id
# @type ClusterID: String
# @param Filters: 过滤条件
# 仅支持cvm-id过滤
# @type Filters: Array
attr_accessor :ClusterID, :Filters
def initialize(clusterid=nil, filters=nil)
@ClusterID = clusterid
@Filters = filters
end
def deserialize(params)
@ClusterID = params['ClusterID']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeEdgeCVMInstances返回参数结构体
class DescribeEdgeCVMInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例相关信息列表的长度
# @type TotalCount: Integer
# @param InstanceInfoSet: 返回的实例相关信息列表
# @type InstanceInfoSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceInfoSet = instanceinfoset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@InstanceInfoSet = params['InstanceInfoSet']
@RequestId = params['RequestId']
end
end
# DescribeEdgeClusterExtraArgs请求参数结构体
class DescribeEdgeClusterExtraArgsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeEdgeClusterExtraArgs返回参数结构体
class DescribeEdgeClusterExtraArgsResponse < TencentCloud::Common::AbstractModel
# @param ClusterExtraArgs: 集群自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterExtraArgs`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterExtraArgs, :RequestId
def initialize(clusterextraargs=nil, requestid=nil)
@ClusterExtraArgs = clusterextraargs
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterExtraArgs'].nil?
@ClusterExtraArgs = EdgeClusterExtraArgs.new
@ClusterExtraArgs.deserialize(params['ClusterExtraArgs'])
end
@RequestId = params['RequestId']
end
end
# DescribeEdgeClusterInstances请求参数结构体
class DescribeEdgeClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterID: 集群id
# @type ClusterID: String
# @param Limit: 查询总数
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param Filters: 过滤条件，仅支持NodeName过滤
# @type Filters: Array
attr_accessor :ClusterID, :Limit, :Offset, :Filters
def initialize(clusterid=nil, limit=nil, offset=nil, filters=nil)
@ClusterID = clusterid
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@ClusterID = params['ClusterID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeEdgeClusterInstances返回参数结构体
class DescribeEdgeClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 该集群总数
# @type TotalCount: Integer
# @param InstanceInfoSet: 节点信息集合
# @type InstanceInfoSet: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceInfoSet = instanceinfoset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@InstanceInfoSet = params['InstanceInfoSet']
@RequestId = params['RequestId']
end
end
# DescribeEksContainerInstanceLog请求参数结构体
class DescribeEksContainerInstanceLogRequest < TencentCloud::Common::AbstractModel
# @param EksCiId: Eks Container Instance Id，即容器实例Id
# @type EksCiId: String
# @param ContainerName: 容器名称，单容器的实例可选填。如果为多容器实例，请指定容器名称。
# @type ContainerName: String
# @param Tail: 返回最新日志行数，默认500，最大2000。日志内容最大返回 1M 数据。
# @type Tail: Integer
# @param StartTime: UTC时间，RFC3339标准
# @type StartTime: String
# @param Previous: 是否是查上一个容器（如果容器退出重启了）
# @type Previous: Boolean
# @param SinceSeconds: 查询最近多少秒内的日志
# @type SinceSeconds: Integer
# @param LimitBytes: 日志总大小限制
# @type LimitBytes: Integer
attr_accessor :EksCiId, :ContainerName, :Tail, :StartTime, :Previous, :SinceSeconds, :LimitBytes
def initialize(eksciid=nil, containername=nil, tail=nil, starttime=nil, previous=nil, sinceseconds=nil, limitbytes=nil)
@EksCiId = eksciid
@ContainerName = containername
@Tail = tail
@StartTime = starttime
@Previous = previous
@SinceSeconds = sinceseconds
@LimitBytes = limitbytes
end
def deserialize(params)
@EksCiId = params['EksCiId']
@ContainerName = params['ContainerName']
@Tail = params['Tail']
@StartTime = params['StartTime']
@Previous = params['Previous']
@SinceSeconds = params['SinceSeconds']
@LimitBytes = params['LimitBytes']
end
end
# DescribeEksContainerInstanceLog返回参数结构体
class DescribeEksContainerInstanceLogResponse < TencentCloud::Common::AbstractModel
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param LogContent: 日志内容
# @type LogContent: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ContainerName, :LogContent, :RequestId
def initialize(containername=nil, logcontent=nil, requestid=nil)
@ContainerName = containername
@LogContent = logcontent
@RequestId = requestid
end
def deserialize(params)
@ContainerName = params['ContainerName']
@LogContent = params['LogContent']
@RequestId = params['RequestId']
end
end
# DescribeEnableVpcCniProgress请求参数结构体
class DescribeEnableVpcCniProgressRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 开启vpc-cni的集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeEnableVpcCniProgress返回参数结构体
class DescribeEnableVpcCniProgressResponse < TencentCloud::Common::AbstractModel
# @param Status: 任务进度的描述：Running/Succeed/Failed
# @type Status: String
# @param ErrorMessage: 当任务进度为Failed时，对任务状态的进一步描述，例如IPAMD组件安装失败
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ErrorMessage: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :ErrorMessage, :RequestId
def initialize(status=nil, errormessage=nil, requestid=nil)
@Status = status
@ErrorMessage = errormessage
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@ErrorMessage = params['ErrorMessage']
@RequestId = params['RequestId']
end
end
# DescribeExistedInstances请求参数结构体
class DescribeExistedInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 ID，请填写查询集群列表 接口中返回的 ClusterId 字段（仅通过ClusterId获取需要过滤条件中的VPCID。节点状态比较时会使用该地域下所有集群中的节点进行比较。参数不支持同时指定InstanceIds和ClusterId。
# @type ClusterId: String
# @param InstanceIds: 按照一个或者多个实例ID查询。实例ID形如：ins-xxxxxxxx。（此参数的具体格式可参考API简介的id.N一节）。每次请求的实例的上限为100。参数不支持同时指定InstanceIds和Filters。
# @type InstanceIds: Array
# @param Filters: 过滤条件,字段和详见[CVM查询实例](https://cloud.tencent.com/document/api/213/15728)如果设置了ClusterId，会附加集群的VPCID作为查询字段，在此情况下如果在Filter中指定了"vpc-id"作为过滤字段，指定的VPCID必须与集群的VPCID相同。
# @type Filters: Array
# @param VagueIpAddress: 实例IP进行过滤(同时支持内网IP和外网IP)
# @type VagueIpAddress: String
# @param VagueInstanceName: 实例名称进行过滤
# @type VagueInstanceName: String
# @param Offset: 偏移量，默认为0。关于Offset的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于Limit的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
# @param IpAddresses: 根据多个实例IP进行过滤
# @type IpAddresses: Array
attr_accessor :ClusterId, :InstanceIds, :Filters, :VagueIpAddress, :VagueInstanceName, :Offset, :Limit, :IpAddresses
def initialize(clusterid=nil, instanceids=nil, filters=nil, vagueipaddress=nil, vagueinstancename=nil, offset=nil, limit=nil, ipaddresses=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@Filters = filters
@VagueIpAddress = vagueipaddress
@VagueInstanceName = vagueinstancename
@Offset = offset
@Limit = limit
@IpAddresses = ipaddresses
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@VagueIpAddress = params['VagueIpAddress']
@VagueInstanceName = params['VagueInstanceName']
@Offset = params['Offset']
@Limit = params['Limit']
@IpAddresses = params['IpAddresses']
end
end
# DescribeExistedInstances返回参数结构体
class DescribeExistedInstancesResponse < TencentCloud::Common::AbstractModel
# @param ExistedInstanceSet: 已经存在的实例信息数组。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExistedInstanceSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ExistedInstanceSet, :TotalCount, :RequestId
def initialize(existedinstanceset=nil, totalcount=nil, requestid=nil)
@ExistedInstanceSet = existedinstanceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ExistedInstanceSet'].nil?
@ExistedInstanceSet = []
params['ExistedInstanceSet'].each do |i|
existedinstance_tmp = ExistedInstance.new
existedinstance_tmp.deserialize(i)
@ExistedInstanceSet << existedinstance_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeExternalClusterSpec请求参数结构体
class DescribeExternalClusterSpecRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 注册集群ID
# @type ClusterId: String
# @param IsExtranet: 默认false 获取内网，是否获取外网版注册命令
# @type IsExtranet: Boolean
# @param IsRefreshExpirationTime: 默认false 不刷新有效时间 ，true刷新有效时间
# @type IsRefreshExpirationTime: Boolean
attr_accessor :ClusterId, :IsExtranet, :IsRefreshExpirationTime
def initialize(clusterid=nil, isextranet=nil, isrefreshexpirationtime=nil)
@ClusterId = clusterid
@IsExtranet = isextranet
@IsRefreshExpirationTime = isrefreshexpirationtime
end
def deserialize(params)
@ClusterId = params['ClusterId']
@IsExtranet = params['IsExtranet']
@IsRefreshExpirationTime = params['IsRefreshExpirationTime']
end
end
# DescribeExternalClusterSpec返回参数结构体
class DescribeExternalClusterSpecResponse < TencentCloud::Common::AbstractModel
# @param Spec: 导入第三方集群YAML定义
# @type Spec: String
# @param Expiration: agent.yaml文件过期时间字符串，时区UTC
# @type Expiration: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Spec, :Expiration, :RequestId
def initialize(spec=nil, expiration=nil, requestid=nil)
@Spec = spec
@Expiration = expiration
@RequestId = requestid
end
def deserialize(params)
@Spec = params['Spec']
@Expiration = params['Expiration']
@RequestId = params['RequestId']
end
end
# DescribeImageCaches请求参数结构体
class DescribeImageCachesRequest < TencentCloud::Common::AbstractModel
# @param ImageCacheIds: 镜像缓存Id数组
# @type ImageCacheIds: Array
# @param ImageCacheNames: 镜像缓存名称数组
# @type ImageCacheNames: Array
# @param Limit: 限定此次返回资源的数量。如果不设定，默认返回20，最大不能超过50
# @type Limit: Integer
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Filters: 过滤条件，可选条件：
# (1)实例名称
# KeyName: image-cache-name
# 类型：String
# @type Filters: Array
attr_accessor :ImageCacheIds, :ImageCacheNames, :Limit, :Offset, :Filters
def initialize(imagecacheids=nil, imagecachenames=nil, limit=nil, offset=nil, filters=nil)
@ImageCacheIds = imagecacheids
@ImageCacheNames = imagecachenames
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@ImageCacheIds = params['ImageCacheIds']
@ImageCacheNames = params['ImageCacheNames']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeImageCaches返回参数结构体
class DescribeImageCachesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 镜像缓存总数
# @type TotalCount: Integer
# @param ImageCaches: 镜像缓存信息列表
# @type ImageCaches: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ImageCaches, :RequestId
def initialize(totalcount=nil, imagecaches=nil, requestid=nil)
@TotalCount = totalcount
@ImageCaches = imagecaches
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ImageCaches'].nil?
@ImageCaches = []
params['ImageCaches'].each do |i|
imagecache_tmp = ImageCache.new
imagecache_tmp.deserialize(i)
@ImageCaches << imagecache_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeImages请求参数结构体
class DescribeImagesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeImages返回参数结构体
class DescribeImagesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 镜像数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param ImageInstanceSet: 镜像信息列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ImageInstanceSet, :RequestId
def initialize(totalcount=nil, imageinstanceset=nil, requestid=nil)
@TotalCount = totalcount
@ImageInstanceSet = imageinstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ImageInstanceSet'].nil?
@ImageInstanceSet = []
params['ImageInstanceSet'].each do |i|
imageinstance_tmp = ImageInstance.new
imageinstance_tmp.deserialize(i)
@ImageInstanceSet << imageinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribePrometheusAgentInstances请求参数结构体
class DescribePrometheusAgentInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# 可以是tke, eks, edge的集群id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribePrometheusAgentInstances返回参数结构体
class DescribePrometheusAgentInstancesResponse < TencentCloud::Common::AbstractModel
# @param Instances: 关联该集群的实例列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Instances: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Instances, :RequestId
def initialize(instances=nil, requestid=nil)
@Instances = instances
@RequestId = requestid
end
def deserialize(params)
@Instances = params['Instances']
@RequestId = params['RequestId']
end
end
# DescribePrometheusAgents请求参数结构体
class DescribePrometheusAgentsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Offset: 用于分页
# @type Offset: Integer
# @param Limit: 用于分页
# @type Limit: Integer
attr_accessor :InstanceId, :Offset, :Limit
def initialize(instanceid=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePrometheusAgents返回参数结构体
class DescribePrometheusAgentsResponse < TencentCloud::Common::AbstractModel
# @param Agents: 被关联集群信息
# @type Agents: Array
# @param Total: 被关联集群总量
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Agents, :Total, :RequestId
def initialize(agents=nil, total=nil, requestid=nil)
@Agents = agents
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Agents'].nil?
@Agents = []
params['Agents'].each do |i|
prometheusagentoverview_tmp = PrometheusAgentOverview.new
prometheusagentoverview_tmp.deserialize(i)
@Agents << prometheusagentoverview_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusAlertHistory请求参数结构体
class DescribePrometheusAlertHistoryRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param RuleName: 告警名称
# @type RuleName: String
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param Labels: label集合
# @type Labels: String
# @param Offset: 分片
# @type Offset: Integer
# @param Limit: 分片
# @type Limit: Integer
attr_accessor :InstanceId, :RuleName, :StartTime, :EndTime, :Labels, :Offset, :Limit
def initialize(instanceid=nil, rulename=nil, starttime=nil, endtime=nil, labels=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@RuleName = rulename
@StartTime = starttime
@EndTime = endtime
@Labels = labels
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RuleName = params['RuleName']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Labels = params['Labels']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePrometheusAlertHistory返回参数结构体
class DescribePrometheusAlertHistoryResponse < TencentCloud::Common::AbstractModel
# @param Items: 告警历史
# @type Items: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Items, :Total, :RequestId
def initialize(items=nil, total=nil, requestid=nil)
@Items = items
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
prometheusalerthistoryitem_tmp = PrometheusAlertHistoryItem.new
prometheusalerthistoryitem_tmp.deserialize(i)
@Items << prometheusalerthistoryitem_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusAlertPolicy请求参数结构体
class DescribePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Offset: 分页
# @type Offset: Integer
# @param Limit: 分页
# @type Limit: Integer
# @param Filters: 过滤
# 支持ID，Name
# @type Filters: Array
attr_accessor :InstanceId, :Offset, :Limit, :Filters
def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusAlertPolicy返回参数结构体
class DescribePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel
# @param AlertRules: 告警详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertRules: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AlertRules, :Total, :RequestId
def initialize(alertrules=nil, total=nil, requestid=nil)
@AlertRules = alertrules
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['AlertRules'].nil?
@AlertRules = []
params['AlertRules'].each do |i|
prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new
prometheusalertpolicyitem_tmp.deserialize(i)
@AlertRules << prometheusalertpolicyitem_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusAlertRule请求参数结构体
class DescribePrometheusAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Offset: 分页
# @type Offset: Integer
# @param Limit: 分页
# @type Limit: Integer
# @param Filters: 过滤
# 支持ID，Name
# @type Filters: Array
attr_accessor :InstanceId, :Offset, :Limit, :Filters
def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusAlertRule返回参数结构体
class DescribePrometheusAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param AlertRules: 告警详情
# @type AlertRules: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AlertRules, :Total, :RequestId
def initialize(alertrules=nil, total=nil, requestid=nil)
@AlertRules = alertrules
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['AlertRules'].nil?
@AlertRules = []
params['AlertRules'].each do |i|
prometheusalertruledetail_tmp = PrometheusAlertRuleDetail.new
prometheusalertruledetail_tmp.deserialize(i)
@AlertRules << prometheusalertruledetail_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusClusterAgents请求参数结构体
class DescribePrometheusClusterAgentsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Offset: 用于分页
# @type Offset: Integer
# @param Limit: 用于分页
# @type Limit: Integer
attr_accessor :InstanceId, :Offset, :Limit
def initialize(instanceid=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePrometheusClusterAgents返回参数结构体
class DescribePrometheusClusterAgentsResponse < TencentCloud::Common::AbstractModel
# @param Agents: 被关联集群信息
# @type Agents: Array
# @param Total: 被关联集群总量
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Agents, :Total, :RequestId
def initialize(agents=nil, total=nil, requestid=nil)
@Agents = agents
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Agents'].nil?
@Agents = []
params['Agents'].each do |i|
prometheusagentoverview_tmp = PrometheusAgentOverview.new
prometheusagentoverview_tmp.deserialize(i)
@Agents << prometheusagentoverview_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusGlobalNotification请求参数结构体
class DescribePrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribePrometheusGlobalNotification返回参数结构体
class DescribePrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel
# @param Notification: 全局告警通知渠道
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Notification: :class:`Tencentcloud::Tke.v20180525.models.PrometheusNotificationItem`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Notification, :RequestId
def initialize(notification=nil, requestid=nil)
@Notification = notification
@RequestId = requestid
end
def deserialize(params)
unless params['Notification'].nil?
@Notification = PrometheusNotificationItem.new
@Notification.deserialize(params['Notification'])
end
@RequestId = params['RequestId']
end
end
# DescribePrometheusInstance请求参数结构体
class DescribePrometheusInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribePrometheusInstance返回参数结构体
class DescribePrometheusInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Name: 实例名称
# @type Name: String
# @param VpcId: 私有网络id
# @type VpcId: String
# @param SubnetId: 子网id
# @type SubnetId: String
# @param COSBucket: cos桶名称
# @type COSBucket: String
# @param QueryAddress: 数据查询地址
# @type QueryAddress: String
# @param Grafana: 实例中grafana相关的信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Grafana: :class:`Tencentcloud::Tke.v20180525.models.PrometheusGrafanaInfo`
# @param AlertManagerUrl: 用户自定义alertmanager
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertManagerUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Name, :VpcId, :SubnetId, :COSBucket, :QueryAddress, :Grafana, :AlertManagerUrl, :RequestId
def initialize(instanceid=nil, name=nil, vpcid=nil, subnetid=nil, cosbucket=nil, queryaddress=nil, grafana=nil, alertmanagerurl=nil, requestid=nil)
@InstanceId = instanceid
@Name = name
@VpcId = vpcid
@SubnetId = subnetid
@COSBucket = cosbucket
@QueryAddress = queryaddress
@Grafana = grafana
@AlertManagerUrl = alertmanagerurl
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Name = params['Name']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@COSBucket = params['COSBucket']
@QueryAddress = params['QueryAddress']
unless params['Grafana'].nil?
@Grafana = PrometheusGrafanaInfo.new
@Grafana.deserialize(params['Grafana'])
end
@AlertManagerUrl = params['AlertManagerUrl']
@RequestId = params['RequestId']
end
end
# DescribePrometheusInstancesOverview请求参数结构体
class DescribePrometheusInstancesOverviewRequest < TencentCloud::Common::AbstractModel
# @param Offset: 用于分页
# @type Offset: Integer
# @param Limit: 用于分页
# @type Limit: Integer
# @param Filters: 过滤实例，目前支持：
# ID: 通过实例ID来过滤
# Name: 通过实例名称来过滤
# @type Filters: Array
attr_accessor :Offset, :Limit, :Filters
def initialize(offset=nil, limit=nil, filters=nil)
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusInstancesOverview返回参数结构体
class DescribePrometheusInstancesOverviewResponse < TencentCloud::Common::AbstractModel
# @param Instances: 实例列表
# @type Instances: Array
# @param Total: 实例总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Instances, :Total, :RequestId
def initialize(instances=nil, total=nil, requestid=nil)
@Instances = instances
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
prometheusinstancesoverview_tmp = PrometheusInstancesOverview.new
prometheusinstancesoverview_tmp.deserialize(i)
@Instances << prometheusinstancesoverview_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusOverviews请求参数结构体
class DescribePrometheusOverviewsRequest < TencentCloud::Common::AbstractModel
# @param Offset: 用于分页
# @type Offset: Integer
# @param Limit: 用于分页
# @type Limit: Integer
# @param Filters: 过滤实例，目前支持：
# ID: 通过实例ID来过滤
# Name: 通过实例名称来过滤
# @type Filters: Array
attr_accessor :Offset, :Limit, :Filters
def initialize(offset=nil, limit=nil, filters=nil)
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusOverviews返回参数结构体
class DescribePrometheusOverviewsResponse < TencentCloud::Common::AbstractModel
# @param Instances: 实例列表
# @type Instances: Array
# @param Total: 实例总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Instances, :Total, :RequestId
def initialize(instances=nil, total=nil, requestid=nil)
@Instances = instances
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
prometheusinstanceoverview_tmp = PrometheusInstanceOverview.new
prometheusinstanceoverview_tmp.deserialize(i)
@Instances << prometheusinstanceoverview_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusRecordRules请求参数结构体
class DescribePrometheusRecordRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Offset: 分页
# @type Offset: Integer
# @param Limit: 分页
# @type Limit: Integer
# @param Filters: 过滤
# @type Filters: Array
attr_accessor :InstanceId, :Offset, :Limit, :Filters
def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusRecordRules返回参数结构体
class DescribePrometheusRecordRulesResponse < TencentCloud::Common::AbstractModel
# @param Records: 聚合规则
# @type Records: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Records, :Total, :RequestId
def initialize(records=nil, total=nil, requestid=nil)
@Records = records
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Records'].nil?
@Records = []
params['Records'].each do |i|
prometheusrecordruleyamlitem_tmp = PrometheusRecordRuleYamlItem.new
prometheusrecordruleyamlitem_tmp.deserialize(i)
@Records << prometheusrecordruleyamlitem_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusTargets请求参数结构体
class DescribePrometheusTargetsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param ClusterType: 集群类型
# @type ClusterType: String
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Filters: 过滤条件，当前支持
# Name=state
# Value=up, down, unknown
# @type Filters: Array
attr_accessor :InstanceId, :ClusterType, :ClusterId, :Filters
def initialize(instanceid=nil, clustertype=nil, clusterid=nil, filters=nil)
@InstanceId = instanceid
@ClusterType = clustertype
@ClusterId = clusterid
@Filters = filters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ClusterType = params['ClusterType']
@ClusterId = params['ClusterId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribePrometheusTargets返回参数结构体
class DescribePrometheusTargetsResponse < TencentCloud::Common::AbstractModel
# @param Jobs: 所有Job的targets信息
# @type Jobs: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Jobs, :RequestId
def initialize(jobs=nil, requestid=nil)
@Jobs = jobs
@RequestId = requestid
end
def deserialize(params)
unless params['Jobs'].nil?
@Jobs = []
params['Jobs'].each do |i|
prometheusjobtargets_tmp = PrometheusJobTargets.new
prometheusjobtargets_tmp.deserialize(i)
@Jobs << prometheusjobtargets_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribePrometheusTemp请求参数结构体
class DescribePrometheusTempRequest < TencentCloud::Common::AbstractModel
# @param Filters: 模糊过滤条件，支持
# Level 按模板级别过滤
# Name 按名称过滤
# Describe 按描述过滤
# ID 按templateId过滤
# @type Filters: Array
# @param Offset: 分页偏移
# @type Offset: Integer
# @param Limit: 总数限制
# @type Limit: Integer
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePrometheusTemp返回参数结构体
class DescribePrometheusTempResponse < TencentCloud::Common::AbstractModel
# @param Templates: 模板列表
# @type Templates: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Templates, :Total, :RequestId
def initialize(templates=nil, total=nil, requestid=nil)
@Templates = templates
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Templates'].nil?
@Templates = []
params['Templates'].each do |i|
prometheustemp_tmp = PrometheusTemp.new
prometheustemp_tmp.deserialize(i)
@Templates << prometheustemp_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribePrometheusTempSync请求参数结构体
class DescribePrometheusTempSyncRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板ID
# @type TemplateId: String
attr_accessor :TemplateId
def initialize(templateid=nil)
@TemplateId = templateid
end
def deserialize(params)
@TemplateId = params['TemplateId']
end
end
# DescribePrometheusTempSync返回参数结构体
class DescribePrometheusTempSyncResponse < TencentCloud::Common::AbstractModel
# @param Targets: 同步目标详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Targets: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Targets, :RequestId
def initialize(targets=nil, requestid=nil)
@Targets = targets
@RequestId = requestid
end
def deserialize(params)
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribePrometheusTemplateSync请求参数结构体
class DescribePrometheusTemplateSyncRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板ID
# @type TemplateId: String
attr_accessor :TemplateId
def initialize(templateid=nil)
@TemplateId = templateid
end
def deserialize(params)
@TemplateId = params['TemplateId']
end
end
# DescribePrometheusTemplateSync返回参数结构体
class DescribePrometheusTemplateSyncResponse < TencentCloud::Common::AbstractModel
# @param Targets: 同步目标详情
# @type Targets: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Targets, :RequestId
def initialize(targets=nil, requestid=nil)
@Targets = targets
@RequestId = requestid
end
def deserialize(params)
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribePrometheusTemplates请求参数结构体
class DescribePrometheusTemplatesRequest < TencentCloud::Common::AbstractModel
# @param Filters: 模糊过滤条件，支持
# Level 按模板级别过滤
# Name 按名称过滤
# Describe 按描述过滤
# ID 按templateId过滤
# @type Filters: Array
# @param Offset: 分页偏移
# @type Offset: Integer
# @param Limit: 总数限制
# @type Limit: Integer
attr_accessor :Filters, :Offset, :Limit
def initialize(filters=nil, offset=nil, limit=nil)
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePrometheusTemplates返回参数结构体
class DescribePrometheusTemplatesResponse < TencentCloud::Common::AbstractModel
# @param Templates: 模板列表
# @type Templates: Array
# @param Total: 总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Templates, :Total, :RequestId
def initialize(templates=nil, total=nil, requestid=nil)
@Templates = templates
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Templates'].nil?
@Templates = []
params['Templates'].each do |i|
prometheustemplate_tmp = PrometheusTemplate.new
prometheustemplate_tmp.deserialize(i)
@Templates << prometheustemplate_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeRegions请求参数结构体
class DescribeRegionsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeRegions返回参数结构体
class DescribeRegionsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 地域的数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RegionInstanceSet: 地域列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RegionInstanceSet, :RequestId
def initialize(totalcount=nil, regioninstanceset=nil, requestid=nil)
@TotalCount = totalcount
@RegionInstanceSet = regioninstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RegionInstanceSet'].nil?
@RegionInstanceSet = []
params['RegionInstanceSet'].each do |i|
regioninstance_tmp = RegionInstance.new
regioninstance_tmp.deserialize(i)
@RegionInstanceSet << regioninstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeResourceUsage请求参数结构体
class DescribeResourceUsageRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeResourceUsage返回参数结构体
class DescribeResourceUsageResponse < TencentCloud::Common::AbstractModel
# @param CRDUsage: CRD使用量
# @type CRDUsage: :class:`Tencentcloud::Tke.v20180525.models.ResourceUsage`
# @param PodUsage: Pod使用量
# @type PodUsage: Integer
# @param ConfigMapUsage: ConfigMap使用量
# @type ConfigMapUsage: Integer
# @param OtherUsage: 其他资源使用量
# @type OtherUsage: :class:`Tencentcloud::Tke.v20180525.models.ResourceUsage`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CRDUsage, :PodUsage, :ConfigMapUsage, :OtherUsage, :RequestId
def initialize(crdusage=nil, podusage=nil, configmapusage=nil, otherusage=nil, requestid=nil)
@CRDUsage = crdusage
@PodUsage = podusage
@ConfigMapUsage = configmapusage
@OtherUsage = otherusage
@RequestId = requestid
end
def deserialize(params)
unless params['CRDUsage'].nil?
@CRDUsage = ResourceUsage.new
@CRDUsage.deserialize(params['CRDUsage'])
end
@PodUsage = params['PodUsage']
@ConfigMapUsage = params['ConfigMapUsage']
unless params['OtherUsage'].nil?
@OtherUsage = ResourceUsage.new
@OtherUsage.deserialize(params['OtherUsage'])
end
@RequestId = params['RequestId']
end
end
# DescribeRouteTableConflicts请求参数结构体
class DescribeRouteTableConflictsRequest < TencentCloud::Common::AbstractModel
# @param RouteTableCidrBlock: 路由表CIDR
# @type RouteTableCidrBlock: String
# @param VpcId: 路由表绑定的VPC
# @type VpcId: String
attr_accessor :RouteTableCidrBlock, :VpcId
def initialize(routetablecidrblock=nil, vpcid=nil)
@RouteTableCidrBlock = routetablecidrblock
@VpcId = vpcid
end
def deserialize(params)
@RouteTableCidrBlock = params['RouteTableCidrBlock']
@VpcId = params['VpcId']
end
end
# DescribeRouteTableConflicts返回参数结构体
class DescribeRouteTableConflictsResponse < TencentCloud::Common::AbstractModel
# @param HasConflict: 路由表是否冲突。
# @type HasConflict: Boolean
# @param RouteTableConflictSet: 路由表冲突列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableConflictSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HasConflict, :RouteTableConflictSet, :RequestId
def initialize(hasconflict=nil, routetableconflictset=nil, requestid=nil)
@HasConflict = hasconflict
@RouteTableConflictSet = routetableconflictset
@RequestId = requestid
end
def deserialize(params)
@HasConflict = params['HasConflict']
unless params['RouteTableConflictSet'].nil?
@RouteTableConflictSet = []
params['RouteTableConflictSet'].each do |i|
routetableconflict_tmp = RouteTableConflict.new
routetableconflict_tmp.deserialize(i)
@RouteTableConflictSet << routetableconflict_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeTKEEdgeClusterCredential请求参数结构体
class DescribeTKEEdgeClusterCredentialRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeTKEEdgeClusterCredential返回参数结构体
class DescribeTKEEdgeClusterCredentialResponse < TencentCloud::Common::AbstractModel
# @param Addresses: 集群的接入地址信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Addresses: Array
# @param Credential: 集群的认证信息
# @type Credential: :class:`Tencentcloud::Tke.v20180525.models.ClusterCredential`
# @param PublicLB: 集群的公网访问信息
# @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
# @param InternalLB: 集群的内网访问信息
# @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterInternalLB`
# @param CoreDns: 集群的CoreDns部署信息
# @type CoreDns: String
# @param HealthRegion: 集群的健康检查多地域部署信息
# @type HealthRegion: String
# @param Health: 集群的健康检查部署信息
# @type Health: String
# @param GridDaemon: 是否部署GridDaemon以支持headless service
# @type GridDaemon: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Addresses, :Credential, :PublicLB, :InternalLB, :CoreDns, :HealthRegion, :Health, :GridDaemon, :RequestId
def initialize(addresses=nil, credential=nil, publiclb=nil, internallb=nil, coredns=nil, healthregion=nil, health=nil, griddaemon=nil, requestid=nil)
@Addresses = addresses
@Credential = credential
@PublicLB = publiclb
@InternalLB = internallb
@CoreDns = coredns
@HealthRegion = healthregion
@Health = health
@GridDaemon = griddaemon
@RequestId = requestid
end
def deserialize(params)
unless params['Addresses'].nil?
@Addresses = []
params['Addresses'].each do |i|
ipaddress_tmp = IPAddress.new
ipaddress_tmp.deserialize(i)
@Addresses << ipaddress_tmp
end
end
unless params['Credential'].nil?
@Credential = ClusterCredential.new
@Credential.deserialize(params['Credential'])
end
unless params['PublicLB'].nil?
@PublicLB = EdgeClusterPublicLB.new
@PublicLB.deserialize(params['PublicLB'])
end
unless params['InternalLB'].nil?
@InternalLB = EdgeClusterInternalLB.new
@InternalLB.deserialize(params['InternalLB'])
end
@CoreDns = params['CoreDns']
@HealthRegion = params['HealthRegion']
@Health = params['Health']
@GridDaemon = params['GridDaemon']
@RequestId = params['RequestId']
end
end
# DescribeTKEEdgeClusterStatus请求参数结构体
class DescribeTKEEdgeClusterStatusRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 边缘计算容器集群Id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeTKEEdgeClusterStatus返回参数结构体
class DescribeTKEEdgeClusterStatusResponse < TencentCloud::Common::AbstractModel
# @param Phase: 集群当前状态
# @type Phase: String
# @param Conditions: 集群过程数组
# @type Conditions: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Phase, :Conditions, :RequestId
def initialize(phase=nil, conditions=nil, requestid=nil)
@Phase = phase
@Conditions = conditions
@RequestId = requestid
end
def deserialize(params)
@Phase = params['Phase']
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
clustercondition_tmp = ClusterCondition.new
clustercondition_tmp.deserialize(i)
@Conditions << clustercondition_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeTKEEdgeClusters请求参数结构体
class DescribeTKEEdgeClustersRequest < TencentCloud::Common::AbstractModel
# @param ClusterIds: 集群ID列表(为空时，
# 表示获取账号下所有集群)
# @type ClusterIds: Array
# @param Offset: 偏移量,默认0
# @type Offset: Integer
# @param Limit: 最大输出条数，默认20
# @type Limit: Integer
# @param Filters: 过滤条件,当前只支持按照单个条件ClusterName进行过滤
# @type Filters: Array
attr_accessor :ClusterIds, :Offset, :Limit, :Filters
def initialize(clusterids=nil, offset=nil, limit=nil, filters=nil)
@ClusterIds = clusterids
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@ClusterIds = params['ClusterIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeTKEEdgeClusters返回参数结构体
class DescribeTKEEdgeClustersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群总个数
# @type TotalCount: Integer
# @param Clusters: 集群信息列表
# @type Clusters: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Clusters, :RequestId
def initialize(totalcount=nil, clusters=nil, requestid=nil)
@TotalCount = totalcount
@Clusters = clusters
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Clusters'].nil?
@Clusters = []
params['Clusters'].each do |i|
edgecluster_tmp = EdgeCluster.new
edgecluster_tmp.deserialize(i)
@Clusters << edgecluster_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeTKEEdgeExternalKubeconfig请求参数结构体
class DescribeTKEEdgeExternalKubeconfigRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeTKEEdgeExternalKubeconfig返回参数结构体
class DescribeTKEEdgeExternalKubeconfigResponse < TencentCloud::Common::AbstractModel
# @param Kubeconfig: kubeconfig文件内容
# @type Kubeconfig: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Kubeconfig, :RequestId
def initialize(kubeconfig=nil, requestid=nil)
@Kubeconfig = kubeconfig
@RequestId = requestid
end
def deserialize(params)
@Kubeconfig = params['Kubeconfig']
@RequestId = params['RequestId']
end
end
# DescribeTKEEdgeScript请求参数结构体
class DescribeTKEEdgeScriptRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Interface: 网卡名
# @type Interface: String
# @param NodeName: 节点名字
# @type NodeName: String
# @param Config: json格式的节点配置
# @type Config: String
attr_accessor :ClusterId, :Interface, :NodeName, :Config
def initialize(clusterid=nil, interface=nil, nodename=nil, config=nil)
@ClusterId = clusterid
@Interface = interface
@NodeName = nodename
@Config = config
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Interface = params['Interface']
@NodeName = params['NodeName']
@Config = params['Config']
end
end
# DescribeTKEEdgeScript返回参数结构体
class DescribeTKEEdgeScriptResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeVersions请求参数结构体
class DescribeVersionsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeVersions返回参数结构体
class DescribeVersionsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 版本数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param VersionInstanceSet: 版本列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VersionInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :VersionInstanceSet, :RequestId
def initialize(totalcount=nil, versioninstanceset=nil, requestid=nil)
@TotalCount = totalcount
@VersionInstanceSet = versioninstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['VersionInstanceSet'].nil?
@VersionInstanceSet = []
params['VersionInstanceSet'].each do |i|
versioninstance_tmp = VersionInstance.new
versioninstance_tmp.deserialize(i)
@VersionInstanceSet << versioninstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVpcCniPodLimits请求参数结构体
class DescribeVpcCniPodLimitsRequest < TencentCloud::Common::AbstractModel
# @param Zone: 查询的机型所在可用区，如：ap-guangzhou-3，默认为空，即不按可用区过滤信息
# @type Zone: String
# @param InstanceFamily: 查询的实例机型系列信息，如：S5，默认为空，即不按机型系列过滤信息
# @type InstanceFamily: String
# @param InstanceType: 查询的实例机型信息，如：S5.LARGE8，默认为空，即不按机型过滤信息
# @type InstanceType: String
attr_accessor :Zone, :InstanceFamily, :InstanceType
def initialize(zone=nil, instancefamily=nil, instancetype=nil)
@Zone = zone
@InstanceFamily = instancefamily
@InstanceType = instancetype
end
def deserialize(params)
@Zone = params['Zone']
@InstanceFamily = params['InstanceFamily']
@InstanceType = params['InstanceType']
end
end
# DescribeVpcCniPodLimits返回参数结构体
class DescribeVpcCniPodLimitsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 机型数据数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param PodLimitsInstanceSet: 机型信息及其可支持的最大VPC-CNI模式Pod数量信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodLimitsInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :PodLimitsInstanceSet, :RequestId
def initialize(totalcount=nil, podlimitsinstanceset=nil, requestid=nil)
@TotalCount = totalcount
@PodLimitsInstanceSet = podlimitsinstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['PodLimitsInstanceSet'].nil?
@PodLimitsInstanceSet = []
params['PodLimitsInstanceSet'].each do |i|
podlimitsinstance_tmp = PodLimitsInstance.new
podlimitsinstance_tmp.deserialize(i)
@PodLimitsInstanceSet << podlimitsinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DisableClusterAudit请求参数结构体
class DisableClusterAuditRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DisableClusterAudit返回参数结构体
class DisableClusterAuditResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisableClusterDeletionProtection请求参数结构体
class DisableClusterDeletionProtectionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DisableClusterDeletionProtection返回参数结构体
class DisableClusterDeletionProtectionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisableEventPersistence请求参数结构体
class DisableEventPersistenceRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DisableEventPersistence返回参数结构体
class DisableEventPersistenceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DisableVpcCniNetworkType请求参数结构体
class DisableVpcCniNetworkTypeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DisableVpcCniNetworkType返回参数结构体
class DisableVpcCniNetworkTypeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# Eks 自定义域名服务器 配置
class DnsServerConf < TencentCloud::Common::AbstractModel
# @param Domain: 域名。空字符串表示所有域名。
# @type Domain: String
# @param DnsServers: dns 服务器地址列表。地址格式 ip:port
# @type DnsServers: Array
attr_accessor :Domain, :DnsServers
def initialize(domain=nil, dnsservers=nil)
@Domain = domain
@DnsServers = dnsservers
end
def deserialize(params)
@Domain = params['Domain']
@DnsServers = params['DnsServers']
end
end
# ECM增强服务
class ECMEnhancedService < TencentCloud::Common::AbstractModel
# @param SecurityService: 是否开启云监控服务
# @type SecurityService: :class:`Tencentcloud::Tke.v20180525.models.ECMRunMonitorServiceEnabled`
# @param MonitorService: 是否开启云镜服务
# @type MonitorService: :class:`Tencentcloud::Tke.v20180525.models.ECMRunSecurityServiceEnabled`
attr_accessor :SecurityService, :MonitorService
def initialize(securityservice=nil, monitorservice=nil)
@SecurityService = securityservice
@MonitorService = monitorservice
end
def deserialize(params)
unless params['SecurityService'].nil?
@SecurityService = ECMRunMonitorServiceEnabled.new
@SecurityService.deserialize(params['SecurityService'])
end
unless params['MonitorService'].nil?
@MonitorService = ECMRunSecurityServiceEnabled.new
@MonitorService.deserialize(params['MonitorService'])
end
end
end
# ECM云监控服务
class ECMRunMonitorServiceEnabled < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启
# @type Enabled: Boolean
attr_accessor :Enabled
def initialize(enabled=nil)
@Enabled = enabled
end
def deserialize(params)
@Enabled = params['Enabled']
end
end
# ECM云镜服务
class ECMRunSecurityServiceEnabled < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启
# @type Enabled: Boolean
# @param Version: 云镜版本：0 基础版，1 专业版
# @type Version: Integer
attr_accessor :Enabled, :Version
def initialize(enabled=nil, version=nil)
@Enabled = enabled
@Version = version
end
def deserialize(params)
@Enabled = params['Enabled']
@Version = params['Version']
end
end
# ECM实例可用区及对应的实例创建数目及运营商的组合
class ECMZoneInstanceCountISP < TencentCloud::Common::AbstractModel
# @param Zone: 创建实例的可用区
# @type Zone: String
# @param InstanceCount: 在当前可用区欲创建的实例数目
# @type InstanceCount: Integer
# @param ISP: 运营商
# @type ISP: String
attr_accessor :Zone, :InstanceCount, :ISP
def initialize(zone=nil, instancecount=nil, isp=nil)
@Zone = zone
@InstanceCount = instancecount
@ISP = isp
end
def deserialize(params)
@Zone = params['Zone']
@InstanceCount = params['InstanceCount']
@ISP = params['ISP']
end
end
# 边缘容器参数描述
class EdgeArgsFlag < TencentCloud::Common::AbstractModel
# @param Name: 参数名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Type: 参数类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param Usage: 参数描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Usage: String
# @param Default: 参数默认值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Default: String
# @param Constraint: 参数可选范围（目前包含range和in两种，"[]"代表range，如"[1, 5]"表示参数必须>=1且 <=5, "()"代表in， 如"('aa', 'bb')"表示参数只能为字符串'aa'或者'bb'，该参数为空表示不校验）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Constraint: String
attr_accessor :Name, :Type, :Usage, :Default, :Constraint
def initialize(name=nil, type=nil, usage=nil, default=nil, constraint=nil)
@Name = name
@Type = type
@Usage = usage
@Default = default
@Constraint = constraint
end
def deserialize(params)
@Name = params['Name']
@Type = params['Type']
@Usage = params['Usage']
@Default = params['Default']
@Constraint = params['Constraint']
end
end
# 边缘容器集群可用的自定义参数
class EdgeAvailableExtraArgs < TencentCloud::Common::AbstractModel
# @param KubeAPIServer: kube-apiserver可用的自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeAPIServer: Array
# @param KubeControllerManager: kube-controller-manager可用的自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeControllerManager: Array
# @param KubeScheduler: kube-scheduler可用的自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeScheduler: Array
# @param Kubelet: kubelet可用的自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Kubelet: Array
attr_accessor :KubeAPIServer, :KubeControllerManager, :KubeScheduler, :Kubelet
def initialize(kubeapiserver=nil, kubecontrollermanager=nil, kubescheduler=nil, kubelet=nil)
@KubeAPIServer = kubeapiserver
@KubeControllerManager = kubecontrollermanager
@KubeScheduler = kubescheduler
@Kubelet = kubelet
end
def deserialize(params)
unless params['KubeAPIServer'].nil?
@KubeAPIServer = []
params['KubeAPIServer'].each do |i|
edgeargsflag_tmp = EdgeArgsFlag.new
edgeargsflag_tmp.deserialize(i)
@KubeAPIServer << edgeargsflag_tmp
end
end
unless params['KubeControllerManager'].nil?
@KubeControllerManager = []
params['KubeControllerManager'].each do |i|
edgeargsflag_tmp = EdgeArgsFlag.new
edgeargsflag_tmp.deserialize(i)
@KubeControllerManager << edgeargsflag_tmp
end
end
unless params['KubeScheduler'].nil?
@KubeScheduler = []
params['KubeScheduler'].each do |i|
edgeargsflag_tmp = EdgeArgsFlag.new
edgeargsflag_tmp.deserialize(i)
@KubeScheduler << edgeargsflag_tmp
end
end
unless params['Kubelet'].nil?
@Kubelet = []
params['Kubelet'].each do |i|
edgeargsflag_tmp = EdgeArgsFlag.new
edgeargsflag_tmp.deserialize(i)
@Kubelet << edgeargsflag_tmp
end
end
end
end
# 边缘计算集群信息
class EdgeCluster < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param VpcId: Vpc Id
# @type VpcId: String
# @param PodCIDR: 集群pod cidr
# @type PodCIDR: String
# @param ServiceCIDR: 集群 service cidr
# @type ServiceCIDR: String
# @param K8SVersion: k8s 版本号
# @type K8SVersion: String
# @param Status: 集群状态
# @type Status: String
# @param ClusterDesc: 集群描述信息
# @type ClusterDesc: String
# @param CreatedTime: 集群创建时间
# @type CreatedTime: String
# @param EdgeClusterVersion: 边缘集群版本
# @type EdgeClusterVersion: String
# @param MaxNodePodNum: 节点最大Pod数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxNodePodNum: Integer
attr_accessor :ClusterId, :ClusterName, :VpcId, :PodCIDR, :ServiceCIDR, :K8SVersion, :Status, :ClusterDesc, :CreatedTime, :EdgeClusterVersion, :MaxNodePodNum
def initialize(clusterid=nil, clustername=nil, vpcid=nil, podcidr=nil, servicecidr=nil, k8sversion=nil, status=nil, clusterdesc=nil, createdtime=nil, edgeclusterversion=nil, maxnodepodnum=nil)
@ClusterId = clusterid
@ClusterName = clustername
@VpcId = vpcid
@PodCIDR = podcidr
@ServiceCIDR = servicecidr
@K8SVersion = k8sversion
@Status = status
@ClusterDesc = clusterdesc
@CreatedTime = createdtime
@EdgeClusterVersion = edgeclusterversion
@MaxNodePodNum = maxnodepodnum
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@VpcId = params['VpcId']
@PodCIDR = params['PodCIDR']
@ServiceCIDR = params['ServiceCIDR']
@K8SVersion = params['K8SVersion']
@Status = params['Status']
@ClusterDesc = params['ClusterDesc']
@CreatedTime = params['CreatedTime']
@EdgeClusterVersion = params['EdgeClusterVersion']
@MaxNodePodNum = params['MaxNodePodNum']
end
end
# 边缘容器集群高级配置
class EdgeClusterAdvancedSettings < TencentCloud::Common::AbstractModel
# @param ExtraArgs: 集群自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterExtraArgs`
attr_accessor :ExtraArgs
def initialize(extraargs=nil)
@ExtraArgs = extraargs
end
def deserialize(params)
unless params['ExtraArgs'].nil?
@ExtraArgs = EdgeClusterExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
end
end
# 边缘容器集群master自定义参数
class EdgeClusterExtraArgs < TencentCloud::Common::AbstractModel
# @param KubeAPIServer: kube-apiserver自定义参数，参数格式为["k1=v1", "k1=v2"]， 例如["max-requests-inflight=500","feature-gates=PodShareProcessNamespace=true,DynamicKubeletConfig=true"]
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeAPIServer: Array
# @param KubeControllerManager: kube-controller-manager自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeControllerManager: Array
# @param KubeScheduler: kube-scheduler自定义参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KubeScheduler: Array
attr_accessor :KubeAPIServer, :KubeControllerManager, :KubeScheduler
def initialize(kubeapiserver=nil, kubecontrollermanager=nil, kubescheduler=nil)
@KubeAPIServer = kubeapiserver
@KubeControllerManager = kubecontrollermanager
@KubeScheduler = kubescheduler
end
def deserialize(params)
@KubeAPIServer = params['KubeAPIServer']
@KubeControllerManager = params['KubeControllerManager']
@KubeScheduler = params['KubeScheduler']
end
end
# 边缘计算集群内网访问LB信息
class EdgeClusterInternalLB < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启内网访问LB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Enabled: Boolean
# @param SubnetId: 内网访问LB关联的子网Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetId: Array
attr_accessor :Enabled, :SubnetId
def initialize(enabled=nil, subnetid=nil)
@Enabled = enabled
@SubnetId = subnetid
end
def deserialize(params)
@Enabled = params['Enabled']
@SubnetId = params['SubnetId']
end
end
# 边缘计算集群公网访问负载均衡信息
class EdgeClusterPublicLB < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启公网访问LB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Enabled: Boolean
# @param AllowFromCidrs: 允许访问的公网cidr
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AllowFromCidrs: Array
attr_accessor :Enabled, :AllowFromCidrs
def initialize(enabled=nil, allowfromcidrs=nil)
@Enabled = enabled
@AllowFromCidrs = allowfromcidrs
end
def deserialize(params)
@Enabled = params['Enabled']
@AllowFromCidrs = params['AllowFromCidrs']
end
end
# 用以帮助用户自动创建EIP的配置
class EipAttribute < TencentCloud::Common::AbstractModel
# @param DeletePolicy: 容器实例删除后，EIP是否释放。
# Never表示不释放，其他任意值（包括空字符串）表示释放。
# @type DeletePolicy: String
# @param InternetServiceProvider: EIP线路类型。默认值：BGP。
# 已开通静态单线IP白名单的用户，可选值：
# CMCC：中国移动
# CTCC：中国电信
# CUCC：中国联通
# 注意：仅部分地域支持静态单线IP。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InternetServiceProvider: String
# @param InternetMaxBandwidthOut: EIP出带宽上限，单位：Mbps。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InternetMaxBandwidthOut: Integer
attr_accessor :DeletePolicy, :InternetServiceProvider, :InternetMaxBandwidthOut
def initialize(deletepolicy=nil, internetserviceprovider=nil, internetmaxbandwidthout=nil)
@DeletePolicy = deletepolicy
@InternetServiceProvider = internetserviceprovider
@InternetMaxBandwidthOut = internetmaxbandwidthout
end
def deserialize(params)
@DeletePolicy = params['DeletePolicy']
@InternetServiceProvider = params['InternetServiceProvider']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
end
end
# EksContainerInstance实例类型
class EksCi < TencentCloud::Common::AbstractModel
# @param EksCiId: EKS Cotainer Instance Id
# @type EksCiId: String
# @param EksCiName: EKS Cotainer Instance Name
# @type EksCiName: String
# @param Memory: 内存大小
# @type Memory: Float
# @param Cpu: CPU大小
# @type Cpu: Float
# @param SecurityGroupIds: 安全组ID
# @type SecurityGroupIds: Array
# @param RestartPolicy: 容器组的重启策略
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RestartPolicy: String
# @param Status: 返回容器组创建状态：Pending，Running，Succeeded，Failed。其中：
# Failed （运行失败）指的容器组退出，RestartPolilcy为Never， 有容器exitCode非0；
# Succeeded（运行成功）指的是容器组退出了，RestartPolicy为Never或onFailure，所有容器exitCode都为0；
# Failed和Succeeded这两种状态都会停止运行，停止计费。
# Pending是创建中，Running是 运行中。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: String
# @param CreationTime: 接到请求后的系统创建时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreationTime: String
# @param SucceededTime: 容器全部成功退出后的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SucceededTime: String
# @param Containers: 容器列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Containers: Array
# @param EksCiVolume: 数据卷信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EksCiVolume: :class:`Tencentcloud::Tke.v20180525.models.EksCiVolume`
# @param SecurityContext: 容器组运行的安全上下文
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityContext: :class:`Tencentcloud::Tke.v20180525.models.SecurityContext`
# @param PrivateIp: 内网ip地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateIp: String
# @param EipAddress: 容器实例绑定的Eip地址，注意可能为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EipAddress: String
# @param GpuType: GPU类型。如无使用GPU则不返回
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GpuType: String
# @param CpuType: CPU类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuType: String
# @param GpuCount: GPU卡数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GpuCount: Integer
# @param VpcId: 实例所属VPC的Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcId: String
# @param SubnetId: 实例所属子网Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetId: String
# @param InitContainers: 初始化容器列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InitContainers: Array
# @param CamRoleName: 为容器实例关联 CAM 角色，value 填写 CAM 角色名称，容器实例可获取该 CAM 角色包含的权限策略，方便 容器实例 内的程序进行如购买资源、读写存储等云资源操作。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CamRoleName: String
# @param AutoCreatedEipId: 自动为用户创建的EipId
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoCreatedEipId: String
# @param PersistStatus: 容器状态是否持久化
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PersistStatus: Boolean
attr_accessor :EksCiId, :EksCiName, :Memory, :Cpu, :SecurityGroupIds, :RestartPolicy, :Status, :CreationTime, :SucceededTime, :Containers, :EksCiVolume, :SecurityContext, :PrivateIp, :EipAddress, :GpuType, :CpuType, :GpuCount, :VpcId, :SubnetId, :InitContainers, :CamRoleName, :AutoCreatedEipId, :PersistStatus
def initialize(eksciid=nil, eksciname=nil, memory=nil, cpu=nil, securitygroupids=nil, restartpolicy=nil, status=nil, creationtime=nil, succeededtime=nil, containers=nil, ekscivolume=nil, securitycontext=nil, privateip=nil, eipaddress=nil, gputype=nil, cputype=nil, gpucount=nil, vpcid=nil, subnetid=nil, initcontainers=nil, camrolename=nil, autocreatedeipid=nil, persiststatus=nil)
@EksCiId = eksciid
@EksCiName = eksciname
@Memory = memory
@Cpu = cpu
@SecurityGroupIds = securitygroupids
@RestartPolicy = restartpolicy
@Status = status
@CreationTime = creationtime
@SucceededTime = succeededtime
@Containers = containers
@EksCiVolume = ekscivolume
@SecurityContext = securitycontext
@PrivateIp = privateip
@EipAddress = eipaddress
@GpuType = gputype
@CpuType = cputype
@GpuCount = gpucount
@VpcId = vpcid
@SubnetId = subnetid
@InitContainers = initcontainers
@CamRoleName = camrolename
@AutoCreatedEipId = autocreatedeipid
@PersistStatus = persiststatus
end
def deserialize(params)
@EksCiId = params['EksCiId']
@EksCiName = params['EksCiName']
@Memory = params['Memory']
@Cpu = params['Cpu']
@SecurityGroupIds = params['SecurityGroupIds']
@RestartPolicy = params['RestartPolicy']
@Status = params['Status']
@CreationTime = params['CreationTime']
@SucceededTime = params['SucceededTime']
unless params['Containers'].nil?
@Containers = []
params['Containers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@Containers << container_tmp
end
end
unless params['EksCiVolume'].nil?
@EksCiVolume = EksCiVolume.new
@EksCiVolume.deserialize(params['EksCiVolume'])
end
unless params['SecurityContext'].nil?
@SecurityContext = SecurityContext.new
@SecurityContext.deserialize(params['SecurityContext'])
end
@PrivateIp = params['PrivateIp']
@EipAddress = params['EipAddress']
@GpuType = params['GpuType']
@CpuType = params['CpuType']
@GpuCount = params['GpuCount']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
unless params['InitContainers'].nil?
@InitContainers = []
params['InitContainers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@InitContainers << container_tmp
end
end
@CamRoleName = params['CamRoleName']
@AutoCreatedEipId = params['AutoCreatedEipId']
@PersistStatus = params['PersistStatus']
end
end
# EksCi地域信息
class EksCiRegionInfo < TencentCloud::Common::AbstractModel
# @param Alias: 地域别名，形如gz
# @type Alias: String
# @param RegionName: 地域名，形如ap-guangzhou
# @type RegionName: String
# @param RegionId: 地域ID
# @type RegionId: Integer
attr_accessor :Alias, :RegionName, :RegionId
def initialize(_alias=nil, regionname=nil, regionid=nil)
@Alias = _alias
@RegionName = regionname
@RegionId = regionid
end
def deserialize(params)
@Alias = params['Alias']
@RegionName = params['RegionName']
@RegionId = params['RegionId']
end
end
# EKS Instance Volume, 可选包括CbsVolume和NfsVolume
class EksCiVolume < TencentCloud::Common::AbstractModel
# @param CbsVolumes: Cbs Volume
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CbsVolumes: Array
# @param NfsVolumes: Nfs Volume
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NfsVolumes: Array
attr_accessor :CbsVolumes, :NfsVolumes
def initialize(cbsvolumes=nil, nfsvolumes=nil)
@CbsVolumes = cbsvolumes
@NfsVolumes = nfsvolumes
end
def deserialize(params)
unless params['CbsVolumes'].nil?
@CbsVolumes = []
params['CbsVolumes'].each do |i|
cbsvolume_tmp = CbsVolume.new
cbsvolume_tmp.deserialize(i)
@CbsVolumes << cbsvolume_tmp
end
end
unless params['NfsVolumes'].nil?
@NfsVolumes = []
params['NfsVolumes'].each do |i|
nfsvolume_tmp = NfsVolume.new
nfsvolume_tmp.deserialize(i)
@NfsVolumes << nfsvolume_tmp
end
end
end
end
# 弹性集群信息
class EksCluster < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param VpcId: Vpc Id
# @type VpcId: String
# @param SubnetIds: 子网列表
# @type SubnetIds: Array
# @param K8SVersion: k8s 版本号
# @type K8SVersion: String
# @param Status: 集群状态(running运行中，initializing 初始化中，failed异常)
# @type Status: String
# @param ClusterDesc: 集群描述信息
# @type ClusterDesc: String
# @param CreatedTime: 集群创建时间
# @type CreatedTime: String
# @param ServiceSubnetId: Service 子网Id
# @type ServiceSubnetId: String
# @param DnsServers: 集群的自定义dns 服务器信息
# @type DnsServers: Array
# @param NeedDeleteCbs: 将来删除集群时是否要删除cbs。默认为 FALSE
# @type NeedDeleteCbs: Boolean
# @param EnableVpcCoreDNS: 是否在用户集群内开启Dns。默认为TRUE
# @type EnableVpcCoreDNS: Boolean
# @param TagSpecification: 标签描述列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagSpecification: Array
attr_accessor :ClusterId, :ClusterName, :VpcId, :SubnetIds, :K8SVersion, :Status, :ClusterDesc, :CreatedTime, :ServiceSubnetId, :DnsServers, :NeedDeleteCbs, :EnableVpcCoreDNS, :TagSpecification
def initialize(clusterid=nil, clustername=nil, vpcid=nil, subnetids=nil, k8sversion=nil, status=nil, clusterdesc=nil, createdtime=nil, servicesubnetid=nil, dnsservers=nil, needdeletecbs=nil, enablevpccoredns=nil, tagspecification=nil)
@ClusterId = clusterid
@ClusterName = clustername
@VpcId = vpcid
@SubnetIds = subnetids
@K8SVersion = k8sversion
@Status = status
@ClusterDesc = clusterdesc
@CreatedTime = createdtime
@ServiceSubnetId = servicesubnetid
@DnsServers = dnsservers
@NeedDeleteCbs = needdeletecbs
@EnableVpcCoreDNS = enablevpccoredns
@TagSpecification = tagspecification
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@VpcId = params['VpcId']
@SubnetIds = params['SubnetIds']
@K8SVersion = params['K8SVersion']
@Status = params['Status']
@ClusterDesc = params['ClusterDesc']
@CreatedTime = params['CreatedTime']
@ServiceSubnetId = params['ServiceSubnetId']
unless params['DnsServers'].nil?
@DnsServers = []
params['DnsServers'].each do |i|
dnsserverconf_tmp = DnsServerConf.new
dnsserverconf_tmp.deserialize(i)
@DnsServers << dnsserverconf_tmp
end
end
@NeedDeleteCbs = params['NeedDeleteCbs']
@EnableVpcCoreDNS = params['EnableVpcCoreDNS']
unless params['TagSpecification'].nil?
@TagSpecification = []
params['TagSpecification'].each do |i|
tagspecification_tmp = TagSpecification.new
tagspecification_tmp.deserialize(i)
@TagSpecification << tagspecification_tmp
end
end
end
end
# EnableClusterAudit请求参数结构体
class EnableClusterAuditRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param LogsetId: CLS日志集ID
# @type LogsetId: String
# @param TopicId: CLS日志主题ID
# @type TopicId: String
attr_accessor :ClusterId, :LogsetId, :TopicId
def initialize(clusterid=nil, logsetid=nil, topicid=nil)
@ClusterId = clusterid
@LogsetId = logsetid
@TopicId = topicid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@LogsetId = params['LogsetId']
@TopicId = params['TopicId']
end
end
# EnableClusterAudit返回参数结构体
class EnableClusterAuditResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableClusterDeletionProtection请求参数结构体
class EnableClusterDeletionProtectionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# EnableClusterDeletionProtection返回参数结构体
class EnableClusterDeletionProtectionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableEventPersistence请求参数结构体
class EnableEventPersistenceRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param LogsetId: cls服务的logsetID
# @type LogsetId: String
# @param TopicId: cls服务的topicID
# @type TopicId: String
attr_accessor :ClusterId, :LogsetId, :TopicId
def initialize(clusterid=nil, logsetid=nil, topicid=nil)
@ClusterId = clusterid
@LogsetId = logsetid
@TopicId = topicid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@LogsetId = params['LogsetId']
@TopicId = params['TopicId']
end
end
# EnableEventPersistence返回参数结构体
class EnableEventPersistenceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableVpcCniNetworkType请求参数结构体
class EnableVpcCniNetworkTypeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param VpcCniType: 开启vpc-cni的模式，tke-route-eni开启的是策略路由模式，tke-direct-eni开启的是独立网卡模式
# @type VpcCniType: String
# @param EnableStaticIp: 是否开启固定IP模式
# @type EnableStaticIp: Boolean
# @param Subnets: 使用的容器子网
# @type Subnets: Array
# @param ExpiredSeconds: 在固定IP模式下，Pod销毁后退还IP的时间，传参必须大于300；不传默认IP永不销毁。
# @type ExpiredSeconds: Integer
attr_accessor :ClusterId, :VpcCniType, :EnableStaticIp, :Subnets, :ExpiredSeconds
def initialize(clusterid=nil, vpccnitype=nil, enablestaticip=nil, subnets=nil, expiredseconds=nil)
@ClusterId = clusterid
@VpcCniType = vpccnitype
@EnableStaticIp = enablestaticip
@Subnets = subnets
@ExpiredSeconds = expiredseconds
end
def deserialize(params)
@ClusterId = params['ClusterId']
@VpcCniType = params['VpcCniType']
@EnableStaticIp = params['EnableStaticIp']
@Subnets = params['Subnets']
@ExpiredSeconds = params['ExpiredSeconds']
end
end
# EnableVpcCniNetworkType返回参数结构体
class EnableVpcCniNetworkTypeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述了实例的增强服务启用情况与其设置，如云安全，云监控等实例 Agent
class EnhancedService < TencentCloud::Common::AbstractModel
# @param SecurityService: 开启云安全服务。若不指定该参数，则默认开启云安全服务。
# @type SecurityService: :class:`Tencentcloud::Tke.v20180525.models.RunSecurityServiceEnabled`
# @param MonitorService: 开启云监控服务。若不指定该参数，则默认开启云监控服务。
# @type MonitorService: :class:`Tencentcloud::Tke.v20180525.models.RunMonitorServiceEnabled`
# @param AutomationService: 开启云自动化助手服务。若不指定该参数，则默认不开启云自动化助手服务。
# @type AutomationService: :class:`Tencentcloud::Tke.v20180525.models.RunAutomationServiceEnabled`
attr_accessor :SecurityService, :MonitorService, :AutomationService
def initialize(securityservice=nil, monitorservice=nil, automationservice=nil)
@SecurityService = securityservice
@MonitorService = monitorservice
@AutomationService = automationservice
end
def deserialize(params)
unless params['SecurityService'].nil?
@SecurityService = RunSecurityServiceEnabled.new
@SecurityService.deserialize(params['SecurityService'])
end
unless params['MonitorService'].nil?
@MonitorService = RunMonitorServiceEnabled.new
@MonitorService.deserialize(params['MonitorService'])
end
unless params['AutomationService'].nil?
@AutomationService = RunAutomationServiceEnabled.new
@AutomationService.deserialize(params['AutomationService'])
end
end
end
# EnvironmentVariable
class EnvironmentVariable < TencentCloud::Common::AbstractModel
# @param Name: key
# @type Name: String
# @param Value: val
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 服务事件
class Event < TencentCloud::Common::AbstractModel
# @param PodName: pod名称
# @type PodName: String
# @param Reason: 事件原因内容
# @type Reason: String
# @param Type: 事件类型
# @type Type: String
# @param Count: 事件出现次数
# @type Count: Integer
# @param FirstTimestamp: 事件第一次出现时间
# @type FirstTimestamp: String
# @param LastTimestamp: 事件最后一次出现时间
# @type LastTimestamp: String
# @param Message: 事件内容
# @type Message: String
attr_accessor :PodName, :Reason, :Type, :Count, :FirstTimestamp, :LastTimestamp, :Message
def initialize(podname=nil, reason=nil, type=nil, count=nil, firsttimestamp=nil, lasttimestamp=nil, message=nil)
@PodName = podname
@Reason = reason
@Type = type
@Count = count
@FirstTimestamp = firsttimestamp
@LastTimestamp = lasttimestamp
@Message = message
end
def deserialize(params)
@PodName = params['PodName']
@Reason = params['Reason']
@Type = params['Type']
@Count = params['Count']
@FirstTimestamp = params['FirstTimestamp']
@LastTimestamp = params['LastTimestamp']
@Message = params['Message']
end
end
# 探针在容器内执行检测命令参数类型
class Exec < TencentCloud::Common::AbstractModel
# @param Commands: 容器内检测的命令
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Commands: Array
attr_accessor :Commands
def initialize(commands=nil)
@Commands = commands
end
def deserialize(params)
@Commands = params['Commands']
end
end
# 已经存在的实例信息
class ExistedInstance < TencentCloud::Common::AbstractModel
# @param Usable: 实例是否支持加入集群(TRUE 可以加入 FALSE 不能加入)。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Usable: Boolean
# @param UnusableReason: 实例不支持加入的原因。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnusableReason: String
# @param AlreadyInCluster: 实例已经所在的集群ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlreadyInCluster: String
# @param InstanceId: 实例ID形如：ins-xxxxxxxx。
# @type InstanceId: String
# @param InstanceName: 实例名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceName: String
# @param PrivateIpAddresses: 实例主网卡的内网IP列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateIpAddresses: Array
# @param PublicIpAddresses: 实例主网卡的公网IP列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicIpAddresses: Array
# @param CreatedTime: 创建时间。按照ISO8601标准表示，并且使用UTC时间。格式为：YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param CPU: 实例的CPU核数，单位：核。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CPU: Integer
# @param Memory: 实例内存容量，单位：GB。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Memory: Integer
# @param OsName: 操作系统名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsName: String
# @param InstanceType: 实例机型。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceType: String
# @param AutoscalingGroupId: 伸缩组ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoscalingGroupId: String
# @param InstanceChargeType: 实例计费模式。取值范围： PREPAID：表示预付费，即包年包月 POSTPAID_BY_HOUR：表示后付费，即按量计费 CDHPAID：CDH付费，即只对CDH计费，不对CDH上的实例计费。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceChargeType: String
attr_accessor :Usable, :UnusableReason, :AlreadyInCluster, :InstanceId, :InstanceName, :PrivateIpAddresses, :PublicIpAddresses, :CreatedTime, :CPU, :Memory, :OsName, :InstanceType, :AutoscalingGroupId, :InstanceChargeType
def initialize(usable=nil, unusablereason=nil, alreadyincluster=nil, instanceid=nil, instancename=nil, privateipaddresses=nil, publicipaddresses=nil, createdtime=nil, cpu=nil, memory=nil, osname=nil, instancetype=nil, autoscalinggroupid=nil, instancechargetype=nil)
@Usable = usable
@UnusableReason = unusablereason
@AlreadyInCluster = alreadyincluster
@InstanceId = instanceid
@InstanceName = instancename
@PrivateIpAddresses = privateipaddresses
@PublicIpAddresses = publicipaddresses
@CreatedTime = createdtime
@CPU = cpu
@Memory = memory
@OsName = osname
@InstanceType = instancetype
@AutoscalingGroupId = autoscalinggroupid
@InstanceChargeType = instancechargetype
end
def deserialize(params)
@Usable = params['Usable']
@UnusableReason = params['UnusableReason']
@AlreadyInCluster = params['AlreadyInCluster']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@PrivateIpAddresses = params['PrivateIpAddresses']
@PublicIpAddresses = params['PublicIpAddresses']
@CreatedTime = params['CreatedTime']
@CPU = params['CPU']
@Memory = params['Memory']
@OsName = params['OsName']
@InstanceType = params['InstanceType']
@AutoscalingGroupId = params['AutoscalingGroupId']
@InstanceChargeType = params['InstanceChargeType']
end
end
# 不同角色的已存在节点配置参数
class ExistedInstancesForNode < TencentCloud::Common::AbstractModel
# @param NodeRole: 节点角色，取值:MASTER_ETCD, WORKER。MASTER_ETCD只有在创建 INDEPENDENT_CLUSTER 独立集群时需要指定。MASTER_ETCD节点数量为3～7，建议为奇数。MASTER_ETCD最小配置为4C8G。
# @type NodeRole: String
# @param ExistedInstancesPara: 已存在实例的重装参数
# @type ExistedInstancesPara: :class:`Tencentcloud::Tke.v20180525.models.ExistedInstancesPara`
# @param InstanceAdvancedSettingsOverride: 节点高级设置，会覆盖集群级别设置的InstanceAdvancedSettings（当前只对节点自定义参数ExtraArgs生效）
# @type InstanceAdvancedSettingsOverride: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param DesiredPodNumbers: 自定义模式集群，可指定每个节点的pod数量
# @type DesiredPodNumbers: Array
attr_accessor :NodeRole, :ExistedInstancesPara, :InstanceAdvancedSettingsOverride, :DesiredPodNumbers
def initialize(noderole=nil, existedinstancespara=nil, instanceadvancedsettingsoverride=nil, desiredpodnumbers=nil)
@NodeRole = noderole
@ExistedInstancesPara = existedinstancespara
@InstanceAdvancedSettingsOverride = instanceadvancedsettingsoverride
@DesiredPodNumbers = desiredpodnumbers
end
def deserialize(params)
@NodeRole = params['NodeRole']
unless params['ExistedInstancesPara'].nil?
@ExistedInstancesPara = ExistedInstancesPara.new
@ExistedInstancesPara.deserialize(params['ExistedInstancesPara'])
end
unless params['InstanceAdvancedSettingsOverride'].nil?
@InstanceAdvancedSettingsOverride = InstanceAdvancedSettings.new
@InstanceAdvancedSettingsOverride.deserialize(params['InstanceAdvancedSettingsOverride'])
end
@DesiredPodNumbers = params['DesiredPodNumbers']
end
end
# 已存在实例的重装参数
class ExistedInstancesPara < TencentCloud::Common::AbstractModel
# @param InstanceIds: 集群ID
# @type InstanceIds: Array
# @param InstanceAdvancedSettings: 实例额外需要设置参数信息
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param EnhancedService: 增强服务。通过该参数可以指定是否开启云安全、云监控等服务。若不指定该参数，则默认开启云监控、云安全服务。
# @type EnhancedService: :class:`Tencentcloud::Tke.v20180525.models.EnhancedService`
# @param LoginSettings: 节点登录信息（目前仅支持使用Password或者单个KeyIds）
# @type LoginSettings: :class:`Tencentcloud::Tke.v20180525.models.LoginSettings`
# @param SecurityGroupIds: 实例所属安全组。该参数可以通过调用 DescribeSecurityGroups 的返回值中的sgId字段来获取。若不指定该参数，则绑定默认安全组。
# @type SecurityGroupIds: Array
# @param HostName: 重装系统时，可以指定修改实例的HostName(集群为HostName模式时，此参数必传，规则名称除不支持大写字符外与[CVM创建实例](https://cloud.tencent.com/document/product/213/15730)接口HostName一致)
# @type HostName: String
attr_accessor :InstanceIds, :InstanceAdvancedSettings, :EnhancedService, :LoginSettings, :SecurityGroupIds, :HostName
def initialize(instanceids=nil, instanceadvancedsettings=nil, enhancedservice=nil, loginsettings=nil, securitygroupids=nil, hostname=nil)
@InstanceIds = instanceids
@InstanceAdvancedSettings = instanceadvancedsettings
@EnhancedService = enhancedservice
@LoginSettings = loginsettings
@SecurityGroupIds = securitygroupids
@HostName = hostname
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
unless params['EnhancedService'].nil?
@EnhancedService = EnhancedService.new
@EnhancedService.deserialize(params['EnhancedService'])
end
unless params['LoginSettings'].nil?
@LoginSettings = LoginSettings.new
@LoginSettings.deserialize(params['LoginSettings'])
end
@SecurityGroupIds = params['SecurityGroupIds']
@HostName = params['HostName']
end
end
# 创建集群时，选择安装的扩展组件的信息
class ExtensionAddon < TencentCloud::Common::AbstractModel
# @param AddonName: 扩展组件名称
# @type AddonName: String
# @param AddonParam: 扩展组件信息(扩展组件资源对象的json字符串描述)
# @type AddonParam: String
attr_accessor :AddonName, :AddonParam
def initialize(addonname=nil, addonparam=nil)
@AddonName = addonname
@AddonParam = addonparam
end
def deserialize(params)
@AddonName = params['AddonName']
@AddonParam = params['AddonParam']
end
end
# 过滤器
class Filter < TencentCloud::Common::AbstractModel
# @param Name: 属性名称, 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Name: String
# @param Values: 属性值, 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@Name = name
@Values = values
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
end
end
# ForwardApplicationRequestV3请求参数结构体
class ForwardApplicationRequestV3Request < TencentCloud::Common::AbstractModel
# @param Method: 请求集群addon的访问
# @type Method: String
# @param Path: 请求集群addon的路径
# @type Path: String
# @param Accept: 请求集群addon后允许接收的数据格式
# @type Accept: String
# @param ContentType: 请求集群addon的数据格式
# @type ContentType: String
# @param RequestBody: 请求集群addon的数据
# @type RequestBody: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param EncodedBody: 是否编码请求内容
# @type EncodedBody: String
attr_accessor :Method, :Path, :Accept, :ContentType, :RequestBody, :ClusterName, :EncodedBody
def initialize(method=nil, path=nil, accept=nil, contenttype=nil, requestbody=nil, clustername=nil, encodedbody=nil)
@Method = method
@Path = path
@Accept = accept
@ContentType = contenttype
@RequestBody = requestbody
@ClusterName = clustername
@EncodedBody = encodedbody
end
def deserialize(params)
@Method = params['Method']
@Path = params['Path']
@Accept = params['Accept']
@ContentType = params['ContentType']
@RequestBody = params['RequestBody']
@ClusterName = params['ClusterName']
@EncodedBody = params['EncodedBody']
end
end
# ForwardApplicationRequestV3返回参数结构体
class ForwardApplicationRequestV3Response < TencentCloud::Common::AbstractModel
# @param ResponseBody: 请求集群addon后返回的数据
# @type ResponseBody: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResponseBody, :RequestId
def initialize(responsebody=nil, requestid=nil)
@ResponseBody = responsebody
@RequestId = requestid
end
def deserialize(params)
@ResponseBody = params['ResponseBody']
@RequestId = params['RequestId']
end
end
# ForwardTKEEdgeApplicationRequestV3请求参数结构体
class ForwardTKEEdgeApplicationRequestV3Request < TencentCloud::Common::AbstractModel
# @param Method: 请求集群addon的访问
# @type Method: String
# @param Path: 请求集群addon的路径
# @type Path: String
# @param Accept: 请求集群addon后允许接收的数据格式
# @type Accept: String
# @param ContentType: 请求集群addon的数据格式
# @type ContentType: String
# @param RequestBody: 请求集群addon的数据
# @type RequestBody: String
# @param ClusterName: 集群名称，例如cls-1234abcd
# @type ClusterName: String
# @param EncodedBody: 是否编码请求内容
# @type EncodedBody: String
attr_accessor :Method, :Path, :Accept, :ContentType, :RequestBody, :ClusterName, :EncodedBody
def initialize(method=nil, path=nil, accept=nil, contenttype=nil, requestbody=nil, clustername=nil, encodedbody=nil)
@Method = method
@Path = path
@Accept = accept
@ContentType = contenttype
@RequestBody = requestbody
@ClusterName = clustername
@EncodedBody = encodedbody
end
def deserialize(params)
@Method = params['Method']
@Path = params['Path']
@Accept = params['Accept']
@ContentType = params['ContentType']
@RequestBody = params['RequestBody']
@ClusterName = params['ClusterName']
@EncodedBody = params['EncodedBody']
end
end
# ForwardTKEEdgeApplicationRequestV3返回参数结构体
class ForwardTKEEdgeApplicationRequestV3Response < TencentCloud::Common::AbstractModel
# @param ResponseBody: 请求集群addon后返回的数据
# @type ResponseBody: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResponseBody, :RequestId
def initialize(responsebody=nil, requestid=nil)
@ResponseBody = responsebody
@RequestId = requestid
end
def deserialize(params)
@ResponseBody = params['ResponseBody']
@RequestId = params['RequestId']
end
end
# GetClusterLevelPrice请求参数结构体
class GetClusterLevelPriceRequest < TencentCloud::Common::AbstractModel
# @param ClusterLevel: 集群规格，托管集群询价
# @type ClusterLevel: String
attr_accessor :ClusterLevel
def initialize(clusterlevel=nil)
@ClusterLevel = clusterlevel
end
def deserialize(params)
@ClusterLevel = params['ClusterLevel']
end
end
# GetClusterLevelPrice返回参数结构体
class GetClusterLevelPriceResponse < TencentCloud::Common::AbstractModel
# @param Cost: 询价结果，单位：分，打折后
# @type Cost: Integer
# @param TotalCost: 询价结果，单位：分，折扣前
# @type TotalCost: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Cost, :TotalCost, :RequestId
def initialize(cost=nil, totalcost=nil, requestid=nil)
@Cost = cost
@TotalCost = totalcost
@RequestId = requestid
end
def deserialize(params)
@Cost = params['Cost']
@TotalCost = params['TotalCost']
@RequestId = params['RequestId']
end
end
# GetMostSuitableImageCache请求参数结构体
class GetMostSuitableImageCacheRequest < TencentCloud::Common::AbstractModel
# @param Images: 容器镜像列表
# @type Images: Array
attr_accessor :Images
def initialize(images=nil)
@Images = images
end
def deserialize(params)
@Images = params['Images']
end
end
# GetMostSuitableImageCache返回参数结构体
class GetMostSuitableImageCacheResponse < TencentCloud::Common::AbstractModel
# @param Found: 是否有匹配的镜像缓存
# @type Found: Boolean
# @param ImageCache: 匹配的镜像缓存
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageCache: :class:`Tencentcloud::Tke.v20180525.models.ImageCache`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Found, :ImageCache, :RequestId
def initialize(found=nil, imagecache=nil, requestid=nil)
@Found = found
@ImageCache = imagecache
@RequestId = requestid
end
def deserialize(params)
@Found = params['Found']
unless params['ImageCache'].nil?
@ImageCache = ImageCache.new
@ImageCache.deserialize(params['ImageCache'])
end
@RequestId = params['RequestId']
end
end
# GetTkeAppChartList请求参数结构体
class GetTkeAppChartListRequest < TencentCloud::Common::AbstractModel
# @param Kind: app类型，取值log,scheduler,network,storage,monitor,dns,image,other,invisible
# @type Kind: String
# @param Arch: app支持的操作系统，取值arm32、arm64、amd64
# @type Arch: String
# @param ClusterType: 集群类型，取值tke、eks
# @type ClusterType: String
attr_accessor :Kind, :Arch, :ClusterType
def initialize(kind=nil, arch=nil, clustertype=nil)
@Kind = kind
@Arch = arch
@ClusterType = clustertype
end
def deserialize(params)
@Kind = params['Kind']
@Arch = params['Arch']
@ClusterType = params['ClusterType']
end
end
# GetTkeAppChartList返回参数结构体
class GetTkeAppChartListResponse < TencentCloud::Common::AbstractModel
# @param AppCharts: 所支持的chart列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppCharts: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AppCharts, :RequestId
def initialize(appcharts=nil, requestid=nil)
@AppCharts = appcharts
@RequestId = requestid
end
def deserialize(params)
unless params['AppCharts'].nil?
@AppCharts = []
params['AppCharts'].each do |i|
appchart_tmp = AppChart.new
appchart_tmp.deserialize(i)
@AppCharts << appchart_tmp
end
end
@RequestId = params['RequestId']
end
end
# GetUpgradeInstanceProgress请求参数结构体
class GetUpgradeInstanceProgressRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Limit: 最多获取多少个节点的进度
# @type Limit: Integer
# @param Offset: 从第几个节点开始获取进度
# @type Offset: Integer
attr_accessor :ClusterId, :Limit, :Offset
def initialize(clusterid=nil, limit=nil, offset=nil)
@ClusterId = clusterid
@Limit = limit
@Offset = offset
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# GetUpgradeInstanceProgress返回参数结构体
class GetUpgradeInstanceProgressResponse < TencentCloud::Common::AbstractModel
# @param Total: 升级节点总数
# @type Total: Integer
# @param Done: 已升级节点总数
# @type Done: Integer
# @param LifeState: 升级任务生命周期
# process 运行中
# paused 已停止
# pauing 正在停止
# done 已完成
# timeout 已超时
# aborted 已取消
# @type LifeState: String
# @param Instances: 各节点升级进度详情
# @type Instances: Array
# @param ClusterStatus: 集群当前状态
# @type ClusterStatus: :class:`Tencentcloud::Tke.v20180525.models.InstanceUpgradeClusterStatus`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Total, :Done, :LifeState, :Instances, :ClusterStatus, :RequestId
def initialize(total=nil, done=nil, lifestate=nil, instances=nil, clusterstatus=nil, requestid=nil)
@Total = total
@Done = done
@LifeState = lifestate
@Instances = instances
@ClusterStatus = clusterstatus
@RequestId = requestid
end
def deserialize(params)
@Total = params['Total']
@Done = params['Done']
@LifeState = params['LifeState']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
instanceupgradeprogressitem_tmp = InstanceUpgradeProgressItem.new
instanceupgradeprogressitem_tmp.deserialize(i)
@Instances << instanceupgradeprogressitem_tmp
end
end
unless params['ClusterStatus'].nil?
@ClusterStatus = InstanceUpgradeClusterStatus.new
@ClusterStatus.deserialize(params['ClusterStatus'])
end
@RequestId = params['RequestId']
end
end
# Probe中的HttpGet
class HttpGet < TencentCloud::Common::AbstractModel
# @param Path: HttpGet检测的路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Path: String
# @param Port: HttpGet检测的端口号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Port: Integer
# @param Scheme: HTTP or HTTPS
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Scheme: String
attr_accessor :Path, :Port, :Scheme
def initialize(path=nil, port=nil, scheme=nil)
@Path = path
@Port = port
@Scheme = scheme
end
def deserialize(params)
@Path = params['Path']
@Port = params['Port']
@Scheme = params['Scheme']
end
end
# IP 地址
class IPAddress < TencentCloud::Common::AbstractModel
# @param Type: Ip 地址的类型。可为 advertise, public 等
# @type Type: String
# @param Ip: Ip 地址
# @type Ip: String
# @param Port: 网络端口
# @type Port: Integer
attr_accessor :Type, :Ip, :Port
def initialize(type=nil, ip=nil, port=nil)
@Type = type
@Ip = ip
@Port = port
end
def deserialize(params)
@Type = params['Type']
@Ip = params['Ip']
@Port = params['Port']
end
end
# 镜像缓存的信息
class ImageCache < TencentCloud::Common::AbstractModel
# @param ImageCacheId: 镜像缓存Id
# @type ImageCacheId: String
# @param ImageCacheName: 镜像缓存名称
# @type ImageCacheName: String
# @param ImageCacheSize: 镜像缓存大小。单位：GiB
# @type ImageCacheSize: Integer
# @param Images: 镜像缓存包含的镜像列表
# @type Images: Array
# @param CreationTime: 创建时间
# @type CreationTime: String
# @param ExpireDateTime: 到期时间
# @type ExpireDateTime: String
# @param Events: 镜像缓存事件信息
# @type Events: Array
# @param LastMatchedTime: 最新一次匹配到镜像缓存的时间
# @type LastMatchedTime: String
# @param SnapshotId: 镜像缓存对应的快照Id
# @type SnapshotId: String
# @param Status: 镜像缓存状态，可能取值：
# Pending：创建中
# Ready：创建完成
# Failed：创建失败
# Updating：更新中
# UpdateFailed：更新失败
# 只有状态为Ready时，才能正常使用镜像缓存
# @type Status: String
attr_accessor :ImageCacheId, :ImageCacheName, :ImageCacheSize, :Images, :CreationTime, :ExpireDateTime, :Events, :LastMatchedTime, :SnapshotId, :Status
def initialize(imagecacheid=nil, imagecachename=nil, imagecachesize=nil, images=nil, creationtime=nil, expiredatetime=nil, events=nil, lastmatchedtime=nil, snapshotid=nil, status=nil)
@ImageCacheId = imagecacheid
@ImageCacheName = imagecachename
@ImageCacheSize = imagecachesize
@Images = images
@CreationTime = creationtime
@ExpireDateTime = expiredatetime
@Events = events
@LastMatchedTime = lastmatchedtime
@SnapshotId = snapshotid
@Status = status
end
def deserialize(params)
@ImageCacheId = params['ImageCacheId']
@ImageCacheName = params['ImageCacheName']
@ImageCacheSize = params['ImageCacheSize']
@Images = params['Images']
@CreationTime = params['CreationTime']
@ExpireDateTime = params['ExpireDateTime']
unless params['Events'].nil?
@Events = []
params['Events'].each do |i|
imagecacheevent_tmp = ImageCacheEvent.new
imagecacheevent_tmp.deserialize(i)
@Events << imagecacheevent_tmp
end
end
@LastMatchedTime = params['LastMatchedTime']
@SnapshotId = params['SnapshotId']
@Status = params['Status']
end
end
# 镜像缓存的事件
class ImageCacheEvent < TencentCloud::Common::AbstractModel
# @param ImageCacheId: 镜像缓存Id
# @type ImageCacheId: String
# @param Type: 事件类型, Normal或者Warning
# @type Type: String
# @param Reason: 事件原因简述
# @type Reason: String
# @param Message: 事件原因详述
# @type Message: String
# @param FirstTimestamp: 事件第一次出现时间
# @type FirstTimestamp: String
# @param LastTimestamp: 事件最后一次出现时间
# @type LastTimestamp: String
attr_accessor :ImageCacheId, :Type, :Reason, :Message, :FirstTimestamp, :LastTimestamp
def initialize(imagecacheid=nil, type=nil, reason=nil, message=nil, firsttimestamp=nil, lasttimestamp=nil)
@ImageCacheId = imagecacheid
@Type = type
@Reason = reason
@Message = message
@FirstTimestamp = firsttimestamp
@LastTimestamp = lasttimestamp
end
def deserialize(params)
@ImageCacheId = params['ImageCacheId']
@Type = params['Type']
@Reason = params['Reason']
@Message = params['Message']
@FirstTimestamp = params['FirstTimestamp']
@LastTimestamp = params['LastTimestamp']
end
end
# 镜像信息
class ImageInstance < TencentCloud::Common::AbstractModel
# @param Alias: 镜像别名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Alias: String
# @param OsName: 操作系统名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsName: String
# @param ImageId: 镜像ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param OsCustomizeType: 容器的镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsCustomizeType: String
attr_accessor :Alias, :OsName, :ImageId, :OsCustomizeType
def initialize(_alias=nil, osname=nil, imageid=nil, oscustomizetype=nil)
@Alias = _alias
@OsName = osname
@ImageId = imageid
@OsCustomizeType = oscustomizetype
end
def deserialize(params)
@Alias = params['Alias']
@OsName = params['OsName']
@ImageId = params['ImageId']
@OsCustomizeType = params['OsCustomizeType']
end
end
# 从镜像仓库拉取镜像的凭据
class ImageRegistryCredential < TencentCloud::Common::AbstractModel
# @param Server: 镜像仓库地址
# @type Server: String
# @param Username: 用户名
# @type Username: String
# @param Password: 密码
# @type Password: String
# @param Name: ImageRegistryCredential的名字
# @type Name: String
attr_accessor :Server, :Username, :Password, :Name
def initialize(server=nil, username=nil, password=nil, name=nil)
@Server = server
@Username = username
@Password = password
@Name = name
end
def deserialize(params)
@Server = params['Server']
@Username = params['Username']
@Password = params['Password']
@Name = params['Name']
end
end
# InstallLogAgent请求参数结构体
class InstallLogAgentRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: TKE集群ID
# @type ClusterId: String
# @param KubeletRootDir: kubelet根目录
# @type KubeletRootDir: String
attr_accessor :ClusterId, :KubeletRootDir
def initialize(clusterid=nil, kubeletrootdir=nil)
@ClusterId = clusterid
@KubeletRootDir = kubeletrootdir
end
def deserialize(params)
@ClusterId = params['ClusterId']
@KubeletRootDir = params['KubeletRootDir']
end
end
# InstallLogAgent返回参数结构体
class InstallLogAgentResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 集群的实例信息
class Instance < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceRole: 节点角色, MASTER, WORKER, ETCD, MASTER_ETCD,ALL, 默认为WORKER
# @type InstanceRole: String
# @param FailedReason: 实例异常(或者处于初始化中)的原因
# @type FailedReason: String
# @param InstanceState: 实例的状态（running 运行中，initializing 初始化中，failed 异常）
# @type InstanceState: String
# @param DrainStatus: 实例是否封锁状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DrainStatus: String
# @param InstanceAdvancedSettings: 节点配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param CreatedTime: 添加时间
# @type CreatedTime: String
# @param LanIP: 节点内网IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LanIP: String
# @param NodePoolId: 资源池ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodePoolId: String
# @param AutoscalingGroupId: 自动伸缩组ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoscalingGroupId: String
attr_accessor :InstanceId, :InstanceRole, :FailedReason, :InstanceState, :DrainStatus, :InstanceAdvancedSettings, :CreatedTime, :LanIP, :NodePoolId, :AutoscalingGroupId
def initialize(instanceid=nil, instancerole=nil, failedreason=nil, instancestate=nil, drainstatus=nil, instanceadvancedsettings=nil, createdtime=nil, lanip=nil, nodepoolid=nil, autoscalinggroupid=nil)
@InstanceId = instanceid
@InstanceRole = instancerole
@FailedReason = failedreason
@InstanceState = instancestate
@DrainStatus = drainstatus
@InstanceAdvancedSettings = instanceadvancedsettings
@CreatedTime = createdtime
@LanIP = lanip
@NodePoolId = nodepoolid
@AutoscalingGroupId = autoscalinggroupid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceRole = params['InstanceRole']
@FailedReason = params['FailedReason']
@InstanceState = params['InstanceState']
@DrainStatus = params['DrainStatus']
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
@CreatedTime = params['CreatedTime']
@LanIP = params['LanIP']
@NodePoolId = params['NodePoolId']
@AutoscalingGroupId = params['AutoscalingGroupId']
end
end
# 描述了k8s集群相关配置与信息。
class InstanceAdvancedSettings < TencentCloud::Common::AbstractModel
# @param MountTarget: 数据盘挂载点, 默认不挂载数据盘. 已格式化的 ext3，ext4，xfs 文件系统的数据盘将直接挂载，其他文件系统或未格式化的数据盘将自动格式化为ext4 (tlinux系统格式化成xfs)并挂载，请注意备份数据! 无数据盘或有多块数据盘的云主机此设置不生效。
# 注意，注意，多盘场景请使用下方的DataDisks数据结构，设置对应的云盘类型、云盘大小、挂载路径、是否格式化等信息。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MountTarget: String
# @param DockerGraphPath: dockerd --graph 指定值, 默认为 /var/lib/docker
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DockerGraphPath: String
# @param UserScript: base64 编码的用户脚本, 此脚本会在 k8s 组件运行后执行, 需要用户保证脚本的可重入及重试逻辑, 脚本及其生成的日志文件可在节点的 /data/ccs_userscript/ 路径查看, 如果要求节点需要在进行初始化完成后才可加入调度, 可配合 unschedulable 参数使用, 在 userScript 最后初始化完成后, 添加 kubectl uncordon nodename --kubeconfig=/root/.kube/config 命令使节点加入调度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UserScript: String
# @param Unschedulable: 设置加入的节点是否参与调度，默认值为0，表示参与调度；非0表示不参与调度, 待节点初始化完成之后, 可执行kubectl uncordon nodename使node加入调度.
# @type Unschedulable: Integer
# @param Labels: 节点Label数组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Labels: Array
# @param DataDisks: 多盘数据盘挂载信息：新建节点时请确保购买CVM的参数传递了购买多个数据盘的信息，如CreateClusterInstances API的RunInstancesPara下的DataDisks也需要设置购买多个数据盘, 具体可以参考CreateClusterInstances接口的添加集群节点(多块数据盘)样例；添加已有节点时，请确保填写的分区信息在节点上真实存在
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DataDisks: Array
# @param ExtraArgs: 节点相关的自定义参数信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.InstanceExtraArgs`
# @param DesiredPodNumber: 该节点属于podCIDR大小自定义模式时，可指定节点上运行的pod数量上限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DesiredPodNumber: Integer
# @param PreStartUserScript: base64 编码的用户脚本，在初始化节点之前执行，目前只对添加已有节点生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PreStartUserScript: String
# @param Taints: 节点污点
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Taints: Array
attr_accessor :MountTarget, :DockerGraphPath, :UserScript, :Unschedulable, :Labels, :DataDisks, :ExtraArgs, :DesiredPodNumber, :PreStartUserScript, :Taints
def initialize(mounttarget=nil, dockergraphpath=nil, userscript=nil, unschedulable=nil, labels=nil, datadisks=nil, extraargs=nil, desiredpodnumber=nil, prestartuserscript=nil, taints=nil)
@MountTarget = mounttarget
@DockerGraphPath = dockergraphpath
@UserScript = userscript
@Unschedulable = unschedulable
@Labels = labels
@DataDisks = datadisks
@ExtraArgs = extraargs
@DesiredPodNumber = desiredpodnumber
@PreStartUserScript = prestartuserscript
@Taints = taints
end
def deserialize(params)
@MountTarget = params['MountTarget']
@DockerGraphPath = params['DockerGraphPath']
@UserScript = params['UserScript']
@Unschedulable = params['Unschedulable']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
unless params['DataDisks'].nil?
@DataDisks = []
params['DataDisks'].each do |i|
datadisk_tmp = DataDisk.new
datadisk_tmp.deserialize(i)
@DataDisks << datadisk_tmp
end
end
unless params['ExtraArgs'].nil?
@ExtraArgs = InstanceExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
@DesiredPodNumber = params['DesiredPodNumber']
@PreStartUserScript = params['PreStartUserScript']
unless params['Taints'].nil?
@Taints = []
params['Taints'].each do |i|
taint_tmp = Taint.new
taint_tmp.deserialize(i)
@Taints << taint_tmp
end
end
end
end
# CVM实例数据盘挂载配置
class InstanceDataDiskMountSetting < TencentCloud::Common::AbstractModel
# @param InstanceType: CVM实例类型
# @type InstanceType: String
# @param DataDisks: 数据盘挂载信息
# @type DataDisks: Array
# @param Zone: CVM实例所属可用区
# @type Zone: String
attr_accessor :InstanceType, :DataDisks, :Zone
def initialize(instancetype=nil, datadisks=nil, zone=nil)
@InstanceType = instancetype
@DataDisks = datadisks
@Zone = zone
end
def deserialize(params)
@InstanceType = params['InstanceType']
unless params['DataDisks'].nil?
@DataDisks = []
params['DataDisks'].each do |i|
datadisk_tmp = DataDisk.new
datadisk_tmp.deserialize(i)
@DataDisks << datadisk_tmp
end
end
@Zone = params['Zone']
end
end
# 节点自定义参数
class InstanceExtraArgs < TencentCloud::Common::AbstractModel
# @param Kubelet: kubelet自定义参数，参数格式为["k1=v1", "k1=v2"]， 例如["root-dir=/var/lib/kubelet","feature-gates=PodShareProcessNamespace=true,DynamicKubeletConfig=true"]
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Kubelet: Array
attr_accessor :Kubelet
def initialize(kubelet=nil)
@Kubelet = kubelet
end
def deserialize(params)
@Kubelet = params['Kubelet']
end
end
# 节点升级过程中集群当前状态
class InstanceUpgradeClusterStatus < TencentCloud::Common::AbstractModel
# @param PodTotal: pod总数
# @type PodTotal: Integer
# @param NotReadyPod: NotReady pod总数
# @type NotReadyPod: Integer
attr_accessor :PodTotal, :NotReadyPod
def initialize(podtotal=nil, notreadypod=nil)
@PodTotal = podtotal
@NotReadyPod = notreadypod
end
def deserialize(params)
@PodTotal = params['PodTotal']
@NotReadyPod = params['NotReadyPod']
end
end
# 某个节点升级前检查结果
class InstanceUpgradePreCheckResult < TencentCloud::Common::AbstractModel
# @param CheckPass: 检查是否通过
# @type CheckPass: Boolean
# @param Items: 检查项数组
# @type Items: Array
# @param SinglePods: 本节点独立pod列表
# @type SinglePods: Array
attr_accessor :CheckPass, :Items, :SinglePods
def initialize(checkpass=nil, items=nil, singlepods=nil)
@CheckPass = checkpass
@Items = items
@SinglePods = singlepods
end
def deserialize(params)
@CheckPass = params['CheckPass']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
instanceupgradeprecheckresultitem_tmp = InstanceUpgradePreCheckResultItem.new
instanceupgradeprecheckresultitem_tmp.deserialize(i)
@Items << instanceupgradeprecheckresultitem_tmp
end
end
@SinglePods = params['SinglePods']
end
end
# 节点升级检查项结果
class InstanceUpgradePreCheckResultItem < TencentCloud::Common::AbstractModel
# @param Namespace: 工作负载的命名空间
# @type Namespace: String
# @param WorkLoadKind: 工作负载类型
# @type WorkLoadKind: String
# @param WorkLoadName: 工作负载名称
# @type WorkLoadName: String
# @param Before: 驱逐节点前工作负载running的pod数目
# @type Before: Integer
# @param After: 驱逐节点后工作负载running的pod数目
# @type After: Integer
# @param Pods: 工作负载在本节点上的pod列表
# @type Pods: Array
attr_accessor :Namespace, :WorkLoadKind, :WorkLoadName, :Before, :After, :Pods
def initialize(namespace=nil, workloadkind=nil, workloadname=nil, before=nil, after=nil, pods=nil)
@Namespace = namespace
@WorkLoadKind = workloadkind
@WorkLoadName = workloadname
@Before = before
@After = after
@Pods = pods
end
def deserialize(params)
@Namespace = params['Namespace']
@WorkLoadKind = params['WorkLoadKind']
@WorkLoadName = params['WorkLoadName']
@Before = params['Before']
@After = params['After']
@Pods = params['Pods']
end
end
# 某个节点的升级进度
class InstanceUpgradeProgressItem < TencentCloud::Common::AbstractModel
# @param InstanceID: 节点instanceID
# @type InstanceID: String
# @param LifeState: 任务生命周期
# process 运行中
# paused 已停止
# pauing 正在停止
# done 已完成
# timeout 已超时
# aborted 已取消
# pending 还未开始
# @type LifeState: String
# @param StartAt: 升级开始时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartAt: String
# @param EndAt: 升级结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndAt: String
# @param CheckResult: 升级前检查结果
# @type CheckResult: :class:`Tencentcloud::Tke.v20180525.models.InstanceUpgradePreCheckResult`
# @param Detail: 升级步骤详情
# @type Detail: Array
attr_accessor :InstanceID, :LifeState, :StartAt, :EndAt, :CheckResult, :Detail
def initialize(instanceid=nil, lifestate=nil, startat=nil, endat=nil, checkresult=nil, detail=nil)
@InstanceID = instanceid
@LifeState = lifestate
@StartAt = startat
@EndAt = endat
@CheckResult = checkresult
@Detail = detail
end
def deserialize(params)
@InstanceID = params['InstanceID']
@LifeState = params['LifeState']
@StartAt = params['StartAt']
@EndAt = params['EndAt']
unless params['CheckResult'].nil?
@CheckResult = InstanceUpgradePreCheckResult.new
@CheckResult.deserialize(params['CheckResult'])
end
unless params['Detail'].nil?
@Detail = []
params['Detail'].each do |i|
taskstepinfo_tmp = TaskStepInfo.new
taskstepinfo_tmp.deserialize(i)
@Detail << taskstepinfo_tmp
end
end
end
end
# k8s中标签，一般以数组的方式存在
class Label < TencentCloud::Common::AbstractModel
# @param Name: map表中的Name
# @type Name: String
# @param Value: map表中的Value
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 健康探针
class LivenessOrReadinessProbe < TencentCloud::Common::AbstractModel
# @param Probe: 探针参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Probe: :class:`Tencentcloud::Tke.v20180525.models.Probe`
# @param HttpGet: HttpGet检测参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HttpGet: :class:`Tencentcloud::Tke.v20180525.models.HttpGet`
# @param Exec: 容器内检测命令参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Exec: :class:`Tencentcloud::Tke.v20180525.models.Exec`
# @param TcpSocket: TcpSocket检测的端口参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TcpSocket: :class:`Tencentcloud::Tke.v20180525.models.TcpSocket`
attr_accessor :Probe, :HttpGet, :Exec, :TcpSocket
def initialize(probe=nil, httpget=nil, exec=nil, tcpsocket=nil)
@Probe = probe
@HttpGet = httpget
@Exec = exec
@TcpSocket = tcpsocket
end
def deserialize(params)
unless params['Probe'].nil?
@Probe = Probe.new
@Probe.deserialize(params['Probe'])
end
unless params['HttpGet'].nil?
@HttpGet = HttpGet.new
@HttpGet.deserialize(params['HttpGet'])
end
unless params['Exec'].nil?
@Exec = Exec.new
@Exec.deserialize(params['Exec'])
end
unless params['TcpSocket'].nil?
@TcpSocket = TcpSocket.new
@TcpSocket.deserialize(params['TcpSocket'])
end
end
end
# 描述了实例登录相关配置与信息。
class LoginSettings < TencentCloud::Common::AbstractModel
# @param Password: 实例登录密码。不同操作系统类型密码复杂度限制不一样，具体如下：
Linux实例密码必须8到30位，至少包括两项[a-z]，[A-Z]、[0-9] 和 [( ) \` ~ ! @ # $ % ^ & * - + = | { } [ ] : ; ' , . ? / ]中的特殊符号。
Windows实例密码必须12到30位，至少包括三项[a-z]，[A-Z]，[0-9] 和 [( ) \` ~ ! @ # $ % ^ & * - + = | { } [ ] : ; ' , . ? /]中的特殊符号。
若不指定该参数，则由系统随机生成密码，并通过站内信方式通知到用户。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Password: String
# @param KeyIds: 密钥ID列表。关联密钥后，就可以通过对应的私钥来访问实例；KeyId可通过接口[DescribeKeyPairs](https://cloud.tencent.com/document/api/213/15699)获取，密钥与密码不能同时指定，同时Windows操作系统不支持指定密钥。当前仅支持购买的时候指定一个密钥。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KeyIds: Array
# @param KeepImageLogin: 保持镜像的原始设置。该参数与Password或KeyIds.N不能同时指定。只有使用自定义镜像、共享镜像或外部导入镜像创建实例时才能指定该参数为TRUE。取值范围：
TRUE：表示保持镜像的登录设置
FALSE：表示不保持镜像的登录设置
默认取值：FALSE。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KeepImageLogin: String
attr_accessor :Password, :KeyIds, :KeepImageLogin
def initialize(password=nil, keyids=nil, keepimagelogin=nil)
@Password = password
@KeyIds = keyids
@KeepImageLogin = keepimagelogin
end
def deserialize(params)
@Password = params['Password']
@KeyIds = params['KeyIds']
@KeepImageLogin = params['KeepImageLogin']
end
end
# 手动加入的节点
class ManuallyAdded < TencentCloud::Common::AbstractModel
# @param Joining: 加入中的节点数量
# @type Joining: Integer
# @param Initializing: 初始化中的节点数量
# @type Initializing: Integer
# @param Normal: 正常的节点数量
# @type Normal: Integer
# @param Total: 节点总数
# @type Total: Integer
attr_accessor :Joining, :Initializing, :Normal, :Total
def initialize(joining=nil, initializing=nil, normal=nil, total=nil)
@Joining = joining
@Initializing = initializing
@Normal = normal
@Total = total
end
def deserialize(params)
@Joining = params['Joining']
@Initializing = params['Initializing']
@Normal = params['Normal']
@Total = params['Total']
end
end
# ModifyClusterAsGroupAttribute请求参数结构体
class ModifyClusterAsGroupAttributeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterAsGroupAttribute: 集群关联的伸缩组属性
# @type ClusterAsGroupAttribute: :class:`Tencentcloud::Tke.v20180525.models.ClusterAsGroupAttribute`
attr_accessor :ClusterId, :ClusterAsGroupAttribute
def initialize(clusterid=nil, clusterasgroupattribute=nil)
@ClusterId = clusterid
@ClusterAsGroupAttribute = clusterasgroupattribute
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['ClusterAsGroupAttribute'].nil?
@ClusterAsGroupAttribute = ClusterAsGroupAttribute.new
@ClusterAsGroupAttribute.deserialize(params['ClusterAsGroupAttribute'])
end
end
end
# ModifyClusterAsGroupAttribute返回参数结构体
class ModifyClusterAsGroupAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterAsGroupOptionAttribute请求参数结构体
class ModifyClusterAsGroupOptionAttributeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterAsGroupOption: 集群弹性伸缩属性
# @type ClusterAsGroupOption: :class:`Tencentcloud::Tke.v20180525.models.ClusterAsGroupOption`
attr_accessor :ClusterId, :ClusterAsGroupOption
def initialize(clusterid=nil, clusterasgroupoption=nil)
@ClusterId = clusterid
@ClusterAsGroupOption = clusterasgroupoption
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['ClusterAsGroupOption'].nil?
@ClusterAsGroupOption = ClusterAsGroupOption.new
@ClusterAsGroupOption.deserialize(params['ClusterAsGroupOption'])
end
end
end
# ModifyClusterAsGroupOptionAttribute返回参数结构体
class ModifyClusterAsGroupOptionAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterAttribute请求参数结构体
class ModifyClusterAttributeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ProjectId: 集群所属项目
# @type ProjectId: Integer
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param ClusterDesc: 集群描述
# @type ClusterDesc: String
# @param ClusterLevel: 集群等级
# @type ClusterLevel: String
# @param AutoUpgradeClusterLevel: 自动变配集群等级
# @type AutoUpgradeClusterLevel: :class:`Tencentcloud::Tke.v20180525.models.AutoUpgradeClusterLevel`
attr_accessor :ClusterId, :ProjectId, :ClusterName, :ClusterDesc, :ClusterLevel, :AutoUpgradeClusterLevel
def initialize(clusterid=nil, projectid=nil, clustername=nil, clusterdesc=nil, clusterlevel=nil, autoupgradeclusterlevel=nil)
@ClusterId = clusterid
@ProjectId = projectid
@ClusterName = clustername
@ClusterDesc = clusterdesc
@ClusterLevel = clusterlevel
@AutoUpgradeClusterLevel = autoupgradeclusterlevel
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ProjectId = params['ProjectId']
@ClusterName = params['ClusterName']
@ClusterDesc = params['ClusterDesc']
@ClusterLevel = params['ClusterLevel']
unless params['AutoUpgradeClusterLevel'].nil?
@AutoUpgradeClusterLevel = AutoUpgradeClusterLevel.new
@AutoUpgradeClusterLevel.deserialize(params['AutoUpgradeClusterLevel'])
end
end
end
# ModifyClusterAttribute返回参数结构体
class ModifyClusterAttributeResponse < TencentCloud::Common::AbstractModel
# @param ProjectId: 集群所属项目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectId: Integer
# @param ClusterName: 集群名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterName: String
# @param ClusterDesc: 集群描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterDesc: String
# @param ClusterLevel: 集群等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterLevel: String
# @param AutoUpgradeClusterLevel: 自动变配集群等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoUpgradeClusterLevel: :class:`Tencentcloud::Tke.v20180525.models.AutoUpgradeClusterLevel`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ProjectId, :ClusterName, :ClusterDesc, :ClusterLevel, :AutoUpgradeClusterLevel, :RequestId
def initialize(projectid=nil, clustername=nil, clusterdesc=nil, clusterlevel=nil, autoupgradeclusterlevel=nil, requestid=nil)
@ProjectId = projectid
@ClusterName = clustername
@ClusterDesc = clusterdesc
@ClusterLevel = clusterlevel
@AutoUpgradeClusterLevel = autoupgradeclusterlevel
@RequestId = requestid
end
def deserialize(params)
@ProjectId = params['ProjectId']
@ClusterName = params['ClusterName']
@ClusterDesc = params['ClusterDesc']
@ClusterLevel = params['ClusterLevel']
unless params['AutoUpgradeClusterLevel'].nil?
@AutoUpgradeClusterLevel = AutoUpgradeClusterLevel.new
@AutoUpgradeClusterLevel.deserialize(params['AutoUpgradeClusterLevel'])
end
@RequestId = params['RequestId']
end
end
# ModifyClusterAuthenticationOptions请求参数结构体
class ModifyClusterAuthenticationOptionsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ServiceAccounts: ServiceAccount认证配置
# @type ServiceAccounts: :class:`Tencentcloud::Tke.v20180525.models.ServiceAccountAuthenticationOptions`
attr_accessor :ClusterId, :ServiceAccounts
def initialize(clusterid=nil, serviceaccounts=nil)
@ClusterId = clusterid
@ServiceAccounts = serviceaccounts
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['ServiceAccounts'].nil?
@ServiceAccounts = ServiceAccountAuthenticationOptions.new
@ServiceAccounts.deserialize(params['ServiceAccounts'])
end
end
end
# ModifyClusterAuthenticationOptions返回参数结构体
class ModifyClusterAuthenticationOptionsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterEndpointSP请求参数结构体
class ModifyClusterEndpointSPRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SecurityPolicies: 安全策略放通单个IP或CIDR(例如: "192.168.1.0/24",默认为拒绝所有)
# @type SecurityPolicies: Array
attr_accessor :ClusterId, :SecurityPolicies
def initialize(clusterid=nil, securitypolicies=nil)
@ClusterId = clusterid
@SecurityPolicies = securitypolicies
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SecurityPolicies = params['SecurityPolicies']
end
end
# ModifyClusterEndpointSP返回参数结构体
class ModifyClusterEndpointSPResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterNodePool请求参数结构体
class ModifyClusterNodePoolRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param NodePoolId: 节点池ID
# @type NodePoolId: String
# @param Name: 名称
# @type Name: String
# @param MaxNodesNum: 最大节点数
# @type MaxNodesNum: Integer
# @param MinNodesNum: 最小节点数
# @type MinNodesNum: Integer
# @param Labels: 标签
# @type Labels: Array
# @param Taints: 污点
# @type Taints: Array
# @param EnableAutoscale: 是否开启伸缩
# @type EnableAutoscale: Boolean
# @param OsName: 操作系统名称
# @type OsName: String
# @param OsCustomizeType: 镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# @type OsCustomizeType: String
# @param ExtraArgs: 节点自定义参数
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.InstanceExtraArgs`
# @param Tags: 资源标签
# @type Tags: Array
# @param Unschedulable: 设置加入的节点是否参与调度，默认值为0，表示参与调度；非0表示不参与调度, 待节点初始化完成之后, 可执行kubectl uncordon nodename使node加入调度.
# @type Unschedulable: Integer
attr_accessor :ClusterId, :NodePoolId, :Name, :MaxNodesNum, :MinNodesNum, :Labels, :Taints, :EnableAutoscale, :OsName, :OsCustomizeType, :ExtraArgs, :Tags, :Unschedulable
def initialize(clusterid=nil, nodepoolid=nil, name=nil, maxnodesnum=nil, minnodesnum=nil, labels=nil, taints=nil, enableautoscale=nil, osname=nil, oscustomizetype=nil, extraargs=nil, tags=nil, unschedulable=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@Name = name
@MaxNodesNum = maxnodesnum
@MinNodesNum = minnodesnum
@Labels = labels
@Taints = taints
@EnableAutoscale = enableautoscale
@OsName = osname
@OsCustomizeType = oscustomizetype
@ExtraArgs = extraargs
@Tags = tags
@Unschedulable = unschedulable
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@Name = params['Name']
@MaxNodesNum = params['MaxNodesNum']
@MinNodesNum = params['MinNodesNum']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
unless params['Taints'].nil?
@Taints = []
params['Taints'].each do |i|
taint_tmp = Taint.new
taint_tmp.deserialize(i)
@Taints << taint_tmp
end
end
@EnableAutoscale = params['EnableAutoscale']
@OsName = params['OsName']
@OsCustomizeType = params['OsCustomizeType']
unless params['ExtraArgs'].nil?
@ExtraArgs = InstanceExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@Unschedulable = params['Unschedulable']
end
end
# ModifyClusterNodePool返回参数结构体
class ModifyClusterNodePoolResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNodePoolDesiredCapacityAboutAsg请求参数结构体
class ModifyNodePoolDesiredCapacityAboutAsgRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param DesiredCapacity: 节点池所关联的伸缩组的期望实例数
# @type DesiredCapacity: Integer
attr_accessor :ClusterId, :NodePoolId, :DesiredCapacity
def initialize(clusterid=nil, nodepoolid=nil, desiredcapacity=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@DesiredCapacity = desiredcapacity
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@DesiredCapacity = params['DesiredCapacity']
end
end
# ModifyNodePoolDesiredCapacityAboutAsg返回参数结构体
class ModifyNodePoolDesiredCapacityAboutAsgResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyNodePoolInstanceTypes请求参数结构体
class ModifyNodePoolInstanceTypesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param InstanceTypes: 机型列表
# @type InstanceTypes: Array
attr_accessor :ClusterId, :NodePoolId, :InstanceTypes
def initialize(clusterid=nil, nodepoolid=nil, instancetypes=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@InstanceTypes = instancetypes
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@InstanceTypes = params['InstanceTypes']
end
end
# ModifyNodePoolInstanceTypes返回参数结构体
class ModifyNodePoolInstanceTypesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrometheusAlertPolicy请求参数结构体
class ModifyPrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertRule: 告警配置
# @type AlertRule: :class:`Tencentcloud::Tke.v20180525.models.PrometheusAlertPolicyItem`
attr_accessor :InstanceId, :AlertRule
def initialize(instanceid=nil, alertrule=nil)
@InstanceId = instanceid
@AlertRule = alertrule
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['AlertRule'].nil?
@AlertRule = PrometheusAlertPolicyItem.new
@AlertRule.deserialize(params['AlertRule'])
end
end
end
# ModifyPrometheusAlertPolicy返回参数结构体
class ModifyPrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrometheusAlertRule请求参数结构体
class ModifyPrometheusAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param AlertRule: 告警配置
# @type AlertRule: :class:`Tencentcloud::Tke.v20180525.models.PrometheusAlertRuleDetail`
attr_accessor :InstanceId, :AlertRule
def initialize(instanceid=nil, alertrule=nil)
@InstanceId = instanceid
@AlertRule = alertrule
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['AlertRule'].nil?
@AlertRule = PrometheusAlertRuleDetail.new
@AlertRule.deserialize(params['AlertRule'])
end
end
end
# ModifyPrometheusAlertRule返回参数结构体
class ModifyPrometheusAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrometheusGlobalNotification请求参数结构体
class ModifyPrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Notification: 告警通知渠道
# @type Notification: :class:`Tencentcloud::Tke.v20180525.models.PrometheusNotificationItem`
attr_accessor :InstanceId, :Notification
def initialize(instanceid=nil, notification=nil)
@InstanceId = instanceid
@Notification = notification
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Notification'].nil?
@Notification = PrometheusNotificationItem.new
@Notification.deserialize(params['Notification'])
end
end
end
# ModifyPrometheusGlobalNotification返回参数结构体
class ModifyPrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrometheusTemp请求参数结构体
class ModifyPrometheusTempRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板ID
# @type TemplateId: String
# @param Template: 修改内容
# @type Template: :class:`Tencentcloud::Tke.v20180525.models.PrometheusTempModify`
attr_accessor :TemplateId, :Template
def initialize(templateid=nil, template=nil)
@TemplateId = templateid
@Template = template
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Template'].nil?
@Template = PrometheusTempModify.new
@Template.deserialize(params['Template'])
end
end
end
# ModifyPrometheusTemp返回参数结构体
class ModifyPrometheusTempResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyPrometheusTemplate请求参数结构体
class ModifyPrometheusTemplateRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 模板ID
# @type TemplateId: String
# @param Template: 修改内容
# @type Template: :class:`Tencentcloud::Tke.v20180525.models.PrometheusTemplateModify`
attr_accessor :TemplateId, :Template
def initialize(templateid=nil, template=nil)
@TemplateId = templateid
@Template = template
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Template'].nil?
@Template = PrometheusTemplateModify.new
@Template.deserialize(params['Template'])
end
end
end
# ModifyPrometheusTemplate返回参数结构体
class ModifyPrometheusTemplateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EKS Instance Nfs Volume
class NfsVolume < TencentCloud::Common::AbstractModel
# @param Name: nfs volume 数据卷名称
# @type Name: String
# @param Server: NFS 服务器地址
# @type Server: String
# @param Path: NFS 数据卷路径
# @type Path: String
# @param ReadOnly: 默认为 False
# @type ReadOnly: Boolean
attr_accessor :Name, :Server, :Path, :ReadOnly
def initialize(name=nil, server=nil, path=nil, readonly=nil)
@Name = name
@Server = server
@Path = path
@ReadOnly = readonly
end
def deserialize(params)
@Name = params['Name']
@Server = params['Server']
@Path = params['Path']
@ReadOnly = params['ReadOnly']
end
end
# 节点统计列表
class NodeCountSummary < TencentCloud::Common::AbstractModel
# @param ManuallyAdded: 手动管理的节点
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ManuallyAdded: :class:`Tencentcloud::Tke.v20180525.models.ManuallyAdded`
# @param AutoscalingAdded: 自动管理的节点
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoscalingAdded: :class:`Tencentcloud::Tke.v20180525.models.AutoscalingAdded`
attr_accessor :ManuallyAdded, :AutoscalingAdded
def initialize(manuallyadded=nil, autoscalingadded=nil)
@ManuallyAdded = manuallyadded
@AutoscalingAdded = autoscalingadded
end
def deserialize(params)
unless params['ManuallyAdded'].nil?
@ManuallyAdded = ManuallyAdded.new
@ManuallyAdded.deserialize(params['ManuallyAdded'])
end
unless params['AutoscalingAdded'].nil?
@AutoscalingAdded = AutoscalingAdded.new
@AutoscalingAdded.deserialize(params['AutoscalingAdded'])
end
end
end
# 节点池描述
class NodePool < TencentCloud::Common::AbstractModel
# @param NodePoolId: NodePoolId 资源池id
# @type NodePoolId: String
# @param Name: Name 资源池名称
# @type Name: String
# @param ClusterInstanceId: ClusterInstanceId 集群实例id
# @type ClusterInstanceId: String
# @param LifeState: LifeState 状态，当前节点池生命周期状态包括：creating，normal，updating，deleting，deleted
# @type LifeState: String
# @param LaunchConfigurationId: LaunchConfigurationId 配置
# @type LaunchConfigurationId: String
# @param AutoscalingGroupId: AutoscalingGroupId 分组id
# @type AutoscalingGroupId: String
# @param Labels: Labels 标签
# @type Labels: Array
# @param Taints: Taints 污点标记
# @type Taints: Array
# @param NodeCountSummary: NodeCountSummary 节点列表
# @type NodeCountSummary: :class:`Tencentcloud::Tke.v20180525.models.NodeCountSummary`
# @param AutoscalingGroupStatus: 状态信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoscalingGroupStatus: String
# @param MaxNodesNum: 最大节点数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxNodesNum: Integer
# @param MinNodesNum: 最小节点数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MinNodesNum: Integer
# @param DesiredNodesNum: 期望的节点数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DesiredNodesNum: Integer
# @param NodePoolOs: 节点池osName
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodePoolOs: String
# @param OsCustomizeType: 容器的镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsCustomizeType: String
# @param ImageId: 镜像id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param DesiredPodNum: 集群属于节点podCIDR大小自定义模式时，节点池需要带上pod数量属性
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DesiredPodNum: Integer
# @param UserScript: 用户自定义脚本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UserScript: String
# @param Tags: 资源标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
attr_accessor :NodePoolId, :Name, :ClusterInstanceId, :LifeState, :LaunchConfigurationId, :AutoscalingGroupId, :Labels, :Taints, :NodeCountSummary, :AutoscalingGroupStatus, :MaxNodesNum, :MinNodesNum, :DesiredNodesNum, :NodePoolOs, :OsCustomizeType, :ImageId, :DesiredPodNum, :UserScript, :Tags
def initialize(nodepoolid=nil, name=nil, clusterinstanceid=nil, lifestate=nil, launchconfigurationid=nil, autoscalinggroupid=nil, labels=nil, taints=nil, nodecountsummary=nil, autoscalinggroupstatus=nil, maxnodesnum=nil, minnodesnum=nil, desirednodesnum=nil, nodepoolos=nil, oscustomizetype=nil, imageid=nil, desiredpodnum=nil, userscript=nil, tags=nil)
@NodePoolId = nodepoolid
@Name = name
@ClusterInstanceId = clusterinstanceid
@LifeState = lifestate
@LaunchConfigurationId = launchconfigurationid
@AutoscalingGroupId = autoscalinggroupid
@Labels = labels
@Taints = taints
@NodeCountSummary = nodecountsummary
@AutoscalingGroupStatus = autoscalinggroupstatus
@MaxNodesNum = maxnodesnum
@MinNodesNum = minnodesnum
@DesiredNodesNum = desirednodesnum
@NodePoolOs = nodepoolos
@OsCustomizeType = oscustomizetype
@ImageId = imageid
@DesiredPodNum = desiredpodnum
@UserScript = userscript
@Tags = tags
end
def deserialize(params)
@NodePoolId = params['NodePoolId']
@Name = params['Name']
@ClusterInstanceId = params['ClusterInstanceId']
@LifeState = params['LifeState']
@LaunchConfigurationId = params['LaunchConfigurationId']
@AutoscalingGroupId = params['AutoscalingGroupId']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
unless params['Taints'].nil?
@Taints = []
params['Taints'].each do |i|
taint_tmp = Taint.new
taint_tmp.deserialize(i)
@Taints << taint_tmp
end
end
unless params['NodeCountSummary'].nil?
@NodeCountSummary = NodeCountSummary.new
@NodeCountSummary.deserialize(params['NodeCountSummary'])
end
@AutoscalingGroupStatus = params['AutoscalingGroupStatus']
@MaxNodesNum = params['MaxNodesNum']
@MinNodesNum = params['MinNodesNum']
@DesiredNodesNum = params['DesiredNodesNum']
@NodePoolOs = params['NodePoolOs']
@OsCustomizeType = params['OsCustomizeType']
@ImageId = params['ImageId']
@DesiredPodNum = params['DesiredPodNum']
@UserScript = params['UserScript']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# 加入存量节点时的节点池选项
class NodePoolOption < TencentCloud::Common::AbstractModel
# @param AddToNodePool: 是否加入节点池
# @type AddToNodePool: Boolean
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param InheritConfigurationFromNodePool: 是否继承节点池相关配置
# @type InheritConfigurationFromNodePool: Boolean
attr_accessor :AddToNodePool, :NodePoolId, :InheritConfigurationFromNodePool
def initialize(addtonodepool=nil, nodepoolid=nil, inheritconfigurationfromnodepool=nil)
@AddToNodePool = addtonodepool
@NodePoolId = nodepoolid
@InheritConfigurationFromNodePool = inheritconfigurationfromnodepool
end
def deserialize(params)
@AddToNodePool = params['AddToNodePool']
@NodePoolId = params['NodePoolId']
@InheritConfigurationFromNodePool = params['InheritConfigurationFromNodePool']
end
end
# 某机型可支持的最大 VPC-CNI 模式的 Pod 数量
class PodLimitsByType < TencentCloud::Common::AbstractModel
# @param TKERouteENINonStaticIP: TKE共享网卡非固定IP模式可支持的Pod数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TKERouteENINonStaticIP: Integer
# @param TKERouteENIStaticIP: TKE共享网卡固定IP模式可支持的Pod数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TKERouteENIStaticIP: Integer
# @param TKEDirectENI: TKE独立网卡模式可支持的Pod数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TKEDirectENI: Integer
attr_accessor :TKERouteENINonStaticIP, :TKERouteENIStaticIP, :TKEDirectENI
def initialize(tkerouteeninonstaticip=nil, tkerouteenistaticip=nil, tkedirecteni=nil)
@TKERouteENINonStaticIP = tkerouteeninonstaticip
@TKERouteENIStaticIP = tkerouteenistaticip
@TKEDirectENI = tkedirecteni
end
def deserialize(params)
@TKERouteENINonStaticIP = params['TKERouteENINonStaticIP']
@TKERouteENIStaticIP = params['TKERouteENIStaticIP']
@TKEDirectENI = params['TKEDirectENI']
end
end
# 机型信息和其可支持的最大VPC-CNI模式Pod数量信息
class PodLimitsInstance < TencentCloud::Common::AbstractModel
# @param Zone: 机型所在可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Zone: String
# @param InstanceFamily: 机型所属机型族
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceFamily: String
# @param InstanceType: 实例机型名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceType: String
# @param PodLimits: 机型可支持的最大VPC-CNI模式Pod数量信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodLimits: :class:`Tencentcloud::Tke.v20180525.models.PodLimitsByType`
attr_accessor :Zone, :InstanceFamily, :InstanceType, :PodLimits
def initialize(zone=nil, instancefamily=nil, instancetype=nil, podlimits=nil)
@Zone = zone
@InstanceFamily = instancefamily
@InstanceType = instancetype
@PodLimits = podlimits
end
def deserialize(params)
@Zone = params['Zone']
@InstanceFamily = params['InstanceFamily']
@InstanceType = params['InstanceType']
unless params['PodLimits'].nil?
@PodLimits = PodLimitsByType.new
@PodLimits.deserialize(params['PodLimits'])
end
end
end
# 健康检查探测参数
class Probe < TencentCloud::Common::AbstractModel
# @param InitialDelaySeconds: Number of seconds after the container has started before liveness probes are initiated.
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InitialDelaySeconds: Integer
# @param TimeoutSeconds: Number of seconds after which the probe times out.
# Defaults to 1 second. Minimum value is 1.
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeoutSeconds: Integer
# @param PeriodSeconds: How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PeriodSeconds: Integer
# @param SuccessThreshold: Minimum consecutive successes for the probe to be considered successful after having failed.Defaults to 1. Must be 1 for liveness. Minimum value is 1.
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SuccessThreshold: Integer
# @param FailureThreshold: Minimum consecutive failures for the probe to be considered failed after having succeeded.Defaults to 3. Minimum value is 1.
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailureThreshold: Integer
attr_accessor :InitialDelaySeconds, :TimeoutSeconds, :PeriodSeconds, :SuccessThreshold, :FailureThreshold
def initialize(initialdelayseconds=nil, timeoutseconds=nil, periodseconds=nil, successthreshold=nil, failurethreshold=nil)
@InitialDelaySeconds = initialdelayseconds
@TimeoutSeconds = timeoutseconds
@PeriodSeconds = periodseconds
@SuccessThreshold = successthreshold
@FailureThreshold = failurethreshold
end
def deserialize(params)
@InitialDelaySeconds = params['InitialDelaySeconds']
@TimeoutSeconds = params['TimeoutSeconds']
@PeriodSeconds = params['PeriodSeconds']
@SuccessThreshold = params['SuccessThreshold']
@FailureThreshold = params['FailureThreshold']
end
end
# 托管prometheus agent概览
class PrometheusAgentOverview < TencentCloud::Common::AbstractModel
# @param ClusterType: 集群类型
# @type ClusterType: String
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Status: agent状态
# normal = 正常
# abnormal = 异常
# @type Status: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param ExternalLabels: 额外labels
# 本集群的所有指标都会带上这几个label
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExternalLabels: Array
attr_accessor :ClusterType, :ClusterId, :Status, :ClusterName, :ExternalLabels
def initialize(clustertype=nil, clusterid=nil, status=nil, clustername=nil, externallabels=nil)
@ClusterType = clustertype
@ClusterId = clusterid
@Status = status
@ClusterName = clustername
@ExternalLabels = externallabels
end
def deserialize(params)
@ClusterType = params['ClusterType']
@ClusterId = params['ClusterId']
@Status = params['Status']
@ClusterName = params['ClusterName']
unless params['ExternalLabels'].nil?
@ExternalLabels = []
params['ExternalLabels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@ExternalLabels << label_tmp
end
end
end
end
# prometheus告警历史
class PrometheusAlertHistoryItem < TencentCloud::Common::AbstractModel
# @param RuleName: 告警名称
# @type RuleName: String
# @param StartTime: 告警开始时间
# @type StartTime: String
# @param Content: 告警内容
# @type Content: String
# @param State: 告警状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type State: String
# @param RuleItem: 触发的规则名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleItem: String
# @param TopicId: 告警渠道的id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TopicId: String
# @param TopicName: 告警渠道的名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TopicName: String
attr_accessor :RuleName, :StartTime, :Content, :State, :RuleItem, :TopicId, :TopicName
def initialize(rulename=nil, starttime=nil, content=nil, state=nil, ruleitem=nil, topicid=nil, topicname=nil)
@RuleName = rulename
@StartTime = starttime
@Content = content
@State = state
@RuleItem = ruleitem
@TopicId = topicid
@TopicName = topicname
end
def deserialize(params)
@RuleName = params['RuleName']
@StartTime = params['StartTime']
@Content = params['Content']
@State = params['State']
@RuleItem = params['RuleItem']
@TopicId = params['TopicId']
@TopicName = params['TopicName']
end
end
# 告警渠道使用自建alertmanager的配置
class PrometheusAlertManagerConfig < TencentCloud::Common::AbstractModel
# @param Url: alertmanager url
# @type Url: String
# @param ClusterType: alertmanager部署所在集群类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterType: String
# @param ClusterId: alertmanager部署所在集群ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
attr_accessor :Url, :ClusterType, :ClusterId
def initialize(url=nil, clustertype=nil, clusterid=nil)
@Url = url
@ClusterType = clustertype
@ClusterId = clusterid
end
def deserialize(params)
@Url = params['Url']
@ClusterType = params['ClusterType']
@ClusterId = params['ClusterId']
end
end
# 托管prometheus告警策略实例
class PrometheusAlertPolicyItem < TencentCloud::Common::AbstractModel
# @param Name: 策略名称
# @type Name: String
# @param Rules: 规则列表
# @type Rules: Array
# @param Id: 告警策略 id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Id: String
# @param TemplateId: 如果该告警来自模板下发，则TemplateId为模板id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateId: String
# @param Notification: 告警渠道，模板中使用可能返回null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Notification: :class:`Tencentcloud::Tke.v20180525.models.PrometheusNotificationItem`
# @param UpdatedAt: 最后修改时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdatedAt: String
# @param ClusterId: 如果告警策略来源于用户集群CRD资源定义，则ClusterId为所属集群ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
attr_accessor :Name, :Rules, :Id, :TemplateId, :Notification, :UpdatedAt, :ClusterId
def initialize(name=nil, rules=nil, id=nil, templateid=nil, notification=nil, updatedat=nil, clusterid=nil)
@Name = name
@Rules = rules
@Id = id
@TemplateId = templateid
@Notification = notification
@UpdatedAt = updatedat
@ClusterId = clusterid
end
def deserialize(params)
@Name = params['Name']
unless params['Rules'].nil?
@Rules = []
params['Rules'].each do |i|
prometheusalertrule_tmp = PrometheusAlertRule.new
prometheusalertrule_tmp.deserialize(i)
@Rules << prometheusalertrule_tmp
end
end
@Id = params['Id']
@TemplateId = params['TemplateId']
unless params['Notification'].nil?
@Notification = PrometheusNotificationItem.new
@Notification.deserialize(params['Notification'])
end
@UpdatedAt = params['UpdatedAt']
@ClusterId = params['ClusterId']
end
end
# Prometheus告警规则
class PrometheusAlertRule < TencentCloud::Common::AbstractModel
# @param Name: 规则名称
# @type Name: String
# @param Rule: prometheus语句
# @type Rule: String
# @param Labels: 额外标签
# @type Labels: Array
# @param Template: 告警发送模板
# @type Template: String
# @param For: 持续时间
# @type For: String
# @param Describe: 该条规则的描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Describe: String
# @param Annotations: 参考prometheus rule中的annotations
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Annotations: Array
# @param RuleState: 告警规则状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleState: Integer
attr_accessor :Name, :Rule, :Labels, :Template, :For, :Describe, :Annotations, :RuleState
def initialize(name=nil, rule=nil, labels=nil, template=nil, _for=nil, describe=nil, annotations=nil, rulestate=nil)
@Name = name
@Rule = rule
@Labels = labels
@Template = template
@For = _for
@Describe = describe
@Annotations = annotations
@RuleState = rulestate
end
def deserialize(params)
@Name = params['Name']
@Rule = params['Rule']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
@Template = params['Template']
@For = params['For']
@Describe = params['Describe']
unless params['Annotations'].nil?
@Annotations = []
params['Annotations'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Annotations << label_tmp
end
end
@RuleState = params['RuleState']
end
end
# 托管prometheus告警配置实例
class PrometheusAlertRuleDetail < TencentCloud::Common::AbstractModel
# @param Name: 规则名称
# @type Name: String
# @param Rules: 规则列表
# @type Rules: Array
# @param UpdatedAt: 最后修改时间
# @type UpdatedAt: String
# @param Notification: 告警渠道
# @type Notification: :class:`Tencentcloud::Tke.v20180525.models.PrometheusNotification`
# @param Id: 告警 id
# @type Id: String
# @param TemplateId: 如果该告警来至模板下发，则TemplateId为模板id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateId: String
# @param Interval: 计算周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Interval: String
attr_accessor :Name, :Rules, :UpdatedAt, :Notification, :Id, :TemplateId, :Interval
def initialize(name=nil, rules=nil, updatedat=nil, notification=nil, id=nil, templateid=nil, interval=nil)
@Name = name
@Rules = rules
@UpdatedAt = updatedat
@Notification = notification
@Id = id
@TemplateId = templateid
@Interval = interval
end
def deserialize(params)
@Name = params['Name']
unless params['Rules'].nil?
@Rules = []
params['Rules'].each do |i|
prometheusalertrule_tmp = PrometheusAlertRule.new
prometheusalertrule_tmp.deserialize(i)
@Rules << prometheusalertrule_tmp
end
end
@UpdatedAt = params['UpdatedAt']
unless params['Notification'].nil?
@Notification = PrometheusNotification.new
@Notification.deserialize(params['Notification'])
end
@Id = params['Id']
@TemplateId = params['TemplateId']
@Interval = params['Interval']
end
end
# prometheus配置
class PrometheusConfigItem < TencentCloud::Common::AbstractModel
# @param Name: 名称
# @type Name: String
# @param Config: 配置内容
# @type Config: String
# @param TemplateId: 用于出参，如果该配置来至模板，则为模板id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateId: String
attr_accessor :Name, :Config, :TemplateId
def initialize(name=nil, config=nil, templateid=nil)
@Name = name
@Config = config
@TemplateId = templateid
end
def deserialize(params)
@Name = params['Name']
@Config = params['Config']
@TemplateId = params['TemplateId']
end
end
# 托管prometheus中grafana的信息
class PrometheusGrafanaInfo < TencentCloud::Common::AbstractModel
# @param Enabled: 是否启用
# @type Enabled: Boolean
# @param Domain: 域名，只有开启外网访问才有效果
# @type Domain: String
# @param Address: 内网地址，或者外网地址
# @type Address: String
# @param Internet: 是否开启了外网访问
# close = 未开启外网访问
# opening = 正在开启外网访问
# open = 已开启外网访问
# @type Internet: String
# @param AdminUser: grafana管理员用户名
# @type AdminUser: String
attr_accessor :Enabled, :Domain, :Address, :Internet, :AdminUser
def initialize(enabled=nil, domain=nil, address=nil, internet=nil, adminuser=nil)
@Enabled = enabled
@Domain = domain
@Address = address
@Internet = internet
@AdminUser = adminuser
end
def deserialize(params)
@Enabled = params['Enabled']
@Domain = params['Domain']
@Address = params['Address']
@Internet = params['Internet']
@AdminUser = params['AdminUser']
end
end
# 托管prometheus实例概览
class PrometheusInstanceOverview < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
# @param Name: 实例名称
# @type Name: String
# @param VpcId: 实例vpcId
# @type VpcId: String
# @param SubnetId: 实例子网Id
# @type SubnetId: String
# @param Status: 实例当前的状态
# prepare_env = 初始化环境
# install_suit = 安装组件
# running = 运行中
# @type Status: String
# @param COSBucket: COS桶存储
# @type COSBucket: String
# @param GrafanaURL: grafana默认地址，如果开启外网访问得为域名，否则为内网地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaURL: String
# @param BoundTotal: 关联集群总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BoundTotal: Integer
# @param BoundNormal: 运行正常的集群数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BoundNormal: Integer
attr_accessor :InstanceId, :Name, :VpcId, :SubnetId, :Status, :COSBucket, :GrafanaURL, :BoundTotal, :BoundNormal
def initialize(instanceid=nil, name=nil, vpcid=nil, subnetid=nil, status=nil, cosbucket=nil, grafanaurl=nil, boundtotal=nil, boundnormal=nil)
@InstanceId = instanceid
@Name = name
@VpcId = vpcid
@SubnetId = subnetid
@Status = status
@COSBucket = cosbucket
@GrafanaURL = grafanaurl
@BoundTotal = boundtotal
@BoundNormal = boundnormal
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Name = params['Name']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Status = params['Status']
@COSBucket = params['COSBucket']
@GrafanaURL = params['GrafanaURL']
@BoundTotal = params['BoundTotal']
@BoundNormal = params['BoundNormal']
end
end
# 托管prometheusV2实例概览
class PrometheusInstancesOverview < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名
# @type InstanceName: String
# @param VpcId: VPC ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param InstanceStatus: 运行状态（1:正在创建；2:运行中；3:异常；4:重启中；5:销毁中； 6:已停机； 7: 已删除）
# @type InstanceStatus: Integer
# @param ChargeStatus: 计费状态（1:正常；2:过期; 3:销毁; 4:分配中; 5:分配失败）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ChargeStatus: Integer
# @param EnableGrafana: 是否开启 Grafana（0:不开启，1:开启）
# @type EnableGrafana: Integer
# @param GrafanaURL: Grafana 面板 URL
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaURL: String
# @param InstanceChargeType: 实例付费类型（1:试用版；2:预付费）
# @type InstanceChargeType: Integer
# @param SpecName: 规格名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SpecName: String
# @param DataRetentionTime: 存储周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DataRetentionTime: Integer
# @param ExpireTime: 购买的实例过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireTime: String
# @param AutoRenewFlag: 自动续费标记(0:不自动续费；1:开启自动续费；2:禁止自动续费；-1:无效)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoRenewFlag: Integer
# @param BoundTotal: 绑定集群总数
# @type BoundTotal: Integer
# @param BoundNormal: 绑定集群正常状态总数
# @type BoundNormal: Integer
attr_accessor :InstanceId, :InstanceName, :VpcId, :SubnetId, :InstanceStatus, :ChargeStatus, :EnableGrafana, :GrafanaURL, :InstanceChargeType, :SpecName, :DataRetentionTime, :ExpireTime, :AutoRenewFlag, :BoundTotal, :BoundNormal
def initialize(instanceid=nil, instancename=nil, vpcid=nil, subnetid=nil, instancestatus=nil, chargestatus=nil, enablegrafana=nil, grafanaurl=nil, instancechargetype=nil, specname=nil, dataretentiontime=nil, expiretime=nil, autorenewflag=nil, boundtotal=nil, boundnormal=nil)
@InstanceId = instanceid
@InstanceName = instancename
@VpcId = vpcid
@SubnetId = subnetid
@InstanceStatus = instancestatus
@ChargeStatus = chargestatus
@EnableGrafana = enablegrafana
@GrafanaURL = grafanaurl
@InstanceChargeType = instancechargetype
@SpecName = specname
@DataRetentionTime = dataretentiontime
@ExpireTime = expiretime
@AutoRenewFlag = autorenewflag
@BoundTotal = boundtotal
@BoundNormal = boundnormal
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@InstanceStatus = params['InstanceStatus']
@ChargeStatus = params['ChargeStatus']
@EnableGrafana = params['EnableGrafana']
@GrafanaURL = params['GrafanaURL']
@InstanceChargeType = params['InstanceChargeType']
@SpecName = params['SpecName']
@DataRetentionTime = params['DataRetentionTime']
@ExpireTime = params['ExpireTime']
@AutoRenewFlag = params['AutoRenewFlag']
@BoundTotal = params['BoundTotal']
@BoundNormal = params['BoundNormal']
end
end
# prometheus一个job的targets
class PrometheusJobTargets < TencentCloud::Common::AbstractModel
# @param Targets: 该Job的targets列表
# @type Targets: Array
# @param JobName: job的名称
# @type JobName: String
# @param Total: targets总数
# @type Total: Integer
# @param Up: 健康的target总数
# @type Up: Integer
attr_accessor :Targets, :JobName, :Total, :Up
def initialize(targets=nil, jobname=nil, total=nil, up=nil)
@Targets = targets
@JobName = jobname
@Total = total
@Up = up
end
def deserialize(params)
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustarget_tmp = PrometheusTarget.new
prometheustarget_tmp.deserialize(i)
@Targets << prometheustarget_tmp
end
end
@JobName = params['JobName']
@Total = params['Total']
@Up = params['Up']
end
end
# amp告警渠道配置
class PrometheusNotification < TencentCloud::Common::AbstractModel
# @param Enabled: 是否启用
# @type Enabled: Boolean
# @param RepeatInterval: 收敛时间
# @type RepeatInterval: String
# @param TimeRangeStart: 生效起始时间
# @type TimeRangeStart: String
# @param TimeRangeEnd: 生效结束时间
# @type TimeRangeEnd: String
# @param NotifyWay: 告警通知方式。目前有SMS、EMAIL、CALL、WECHAT方式。
# 分别代表：短信、邮件、电话、微信
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotifyWay: Array
# @param ReceiverGroups: 告警接收组（用户组）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverGroups: Array
# @param PhoneNotifyOrder: 电话告警顺序。
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneNotifyOrder: Array
# @param PhoneCircleTimes: 电话告警次数。
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleTimes: Integer
# @param PhoneInnerInterval: 电话告警轮内间隔。单位：秒
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneInnerInterval: Integer
# @param PhoneCircleInterval: 电话告警轮外间隔。单位：秒
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleInterval: Integer
# @param PhoneArriveNotice: 电话告警触达通知
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneArriveNotice: Boolean
# @param Type: 通道类型，默认为amp，支持以下
# amp
# webhook
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param WebHook: 如果Type为webhook, 则该字段为必填项
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WebHook: String
attr_accessor :Enabled, :RepeatInterval, :TimeRangeStart, :TimeRangeEnd, :NotifyWay, :ReceiverGroups, :PhoneNotifyOrder, :PhoneCircleTimes, :PhoneInnerInterval, :PhoneCircleInterval, :PhoneArriveNotice, :Type, :WebHook
def initialize(enabled=nil, repeatinterval=nil, timerangestart=nil, timerangeend=nil, notifyway=nil, receivergroups=nil, phonenotifyorder=nil, phonecircletimes=nil, phoneinnerinterval=nil, phonecircleinterval=nil, phonearrivenotice=nil, type=nil, webhook=nil)
@Enabled = enabled
@RepeatInterval = repeatinterval
@TimeRangeStart = timerangestart
@TimeRangeEnd = timerangeend
@NotifyWay = notifyway
@ReceiverGroups = receivergroups
@PhoneNotifyOrder = phonenotifyorder
@PhoneCircleTimes = phonecircletimes
@PhoneInnerInterval = phoneinnerinterval
@PhoneCircleInterval = phonecircleinterval
@PhoneArriveNotice = phonearrivenotice
@Type = type
@WebHook = webhook
end
def deserialize(params)
@Enabled = params['Enabled']
@RepeatInterval = params['RepeatInterval']
@TimeRangeStart = params['TimeRangeStart']
@TimeRangeEnd = params['TimeRangeEnd']
@NotifyWay = params['NotifyWay']
@ReceiverGroups = params['ReceiverGroups']
@PhoneNotifyOrder = params['PhoneNotifyOrder']
@PhoneCircleTimes = params['PhoneCircleTimes']
@PhoneInnerInterval = params['PhoneInnerInterval']
@PhoneCircleInterval = params['PhoneCircleInterval']
@PhoneArriveNotice = params['PhoneArriveNotice']
@Type = params['Type']
@WebHook = params['WebHook']
end
end
# 告警通知渠道配置
class PrometheusNotificationItem < TencentCloud::Common::AbstractModel
# @param Enabled: 是否启用
# @type Enabled: Boolean
# @param Type: 通道类型，默认为amp，支持以下
# amp
# webhook
# alertmanager
# @type Type: String
# @param WebHook: 如果Type为webhook, 则该字段为必填项
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WebHook: String
# @param AlertManager: 如果Type为alertmanager, 则该字段为必填项
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertManager: :class:`Tencentcloud::Tke.v20180525.models.PrometheusAlertManagerConfig`
# @param RepeatInterval: 收敛时间
# @type RepeatInterval: String
# @param TimeRangeStart: 生效起始时间
# @type TimeRangeStart: String
# @param TimeRangeEnd: 生效结束时间
# @type TimeRangeEnd: String
# @param NotifyWay: 告警通知方式。目前有SMS、EMAIL、CALL、WECHAT方式。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotifyWay: Array
# @param ReceiverGroups: 告警接收组（用户组）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverGroups: Array
# @param PhoneNotifyOrder: 电话告警顺序。
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneNotifyOrder: Array
# @param PhoneCircleTimes: 电话告警次数。
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleTimes: Integer
# @param PhoneInnerInterval: 电话告警轮内间隔。单位：秒
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneInnerInterval: Integer
# @param PhoneCircleInterval: 电话告警轮外间隔。单位：秒
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleInterval: Integer
# @param PhoneArriveNotice: 电话告警触达通知
# 注：NotifyWay选择CALL，采用该参数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneArriveNotice: Boolean
attr_accessor :Enabled, :Type, :WebHook, :AlertManager, :RepeatInterval, :TimeRangeStart, :TimeRangeEnd, :NotifyWay, :ReceiverGroups, :PhoneNotifyOrder, :PhoneCircleTimes, :PhoneInnerInterval, :PhoneCircleInterval, :PhoneArriveNotice
def initialize(enabled=nil, type=nil, webhook=nil, alertmanager=nil, repeatinterval=nil, timerangestart=nil, timerangeend=nil, notifyway=nil, receivergroups=nil, phonenotifyorder=nil, phonecircletimes=nil, phoneinnerinterval=nil, phonecircleinterval=nil, phonearrivenotice=nil)
@Enabled = enabled
@Type = type
@WebHook = webhook
@AlertManager = alertmanager
@RepeatInterval = repeatinterval
@TimeRangeStart = timerangestart
@TimeRangeEnd = timerangeend
@NotifyWay = notifyway
@ReceiverGroups = receivergroups
@PhoneNotifyOrder = phonenotifyorder
@PhoneCircleTimes = phonecircletimes
@PhoneInnerInterval = phoneinnerinterval
@PhoneCircleInterval = phonecircleinterval
@PhoneArriveNotice = phonearrivenotice
end
def deserialize(params)
@Enabled = params['Enabled']
@Type = params['Type']
@WebHook = params['WebHook']
unless params['AlertManager'].nil?
@AlertManager = PrometheusAlertManagerConfig.new
@AlertManager.deserialize(params['AlertManager'])
end
@RepeatInterval = params['RepeatInterval']
@TimeRangeStart = params['TimeRangeStart']
@TimeRangeEnd = params['TimeRangeEnd']
@NotifyWay = params['NotifyWay']
@ReceiverGroups = params['ReceiverGroups']
@PhoneNotifyOrder = params['PhoneNotifyOrder']
@PhoneCircleTimes = params['PhoneCircleTimes']
@PhoneInnerInterval = params['PhoneInnerInterval']
@PhoneCircleInterval = params['PhoneCircleInterval']
@PhoneArriveNotice = params['PhoneArriveNotice']
end
end
# prometheus聚合规则实例详情，包含所属集群ID
class PrometheusRecordRuleYamlItem < TencentCloud::Common::AbstractModel
# @param Name: 实例名称
# @type Name: String
# @param UpdateTime: 最近更新时间
# @type UpdateTime: String
# @param TemplateId: Yaml内容
# @type TemplateId: String
# @param Content: 如果该聚合规则来至模板，则TemplateId为模板id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Content: String
# @param ClusterId: 该聚合规则如果来源于用户集群crd资源定义，则ClusterId为所属集群ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
attr_accessor :Name, :UpdateTime, :TemplateId, :Content, :ClusterId
def initialize(name=nil, updatetime=nil, templateid=nil, content=nil, clusterid=nil)
@Name = name
@UpdateTime = updatetime
@TemplateId = templateid
@Content = content
@ClusterId = clusterid
end
def deserialize(params)
@Name = params['Name']
@UpdateTime = params['UpdateTime']
@TemplateId = params['TemplateId']
@Content = params['Content']
@ClusterId = params['ClusterId']
end
end
# prometheus一个抓取目标的信息
class PrometheusTarget < TencentCloud::Common::AbstractModel
# @param Url: 抓取目标的URL
# @type Url: String
# @param State: target当前状态,当前支持
# up = 健康
# down = 不健康
# unknown = 未知
# @type State: String
# @param Labels: target的元label
# @type Labels: Array
# @param LastScrape: 上一次抓取的时间
# @type LastScrape: String
# @param ScrapeDuration: 上一次抓取的耗时，单位是s
# @type ScrapeDuration: Float
# @param Error: 上一次抓取如果错误，该字段存储错误信息
# @type Error: String
attr_accessor :Url, :State, :Labels, :LastScrape, :ScrapeDuration, :Error
def initialize(url=nil, state=nil, labels=nil, lastscrape=nil, scrapeduration=nil, error=nil)
@Url = url
@State = state
@Labels = labels
@LastScrape = lastscrape
@ScrapeDuration = scrapeduration
@Error = error
end
def deserialize(params)
@Url = params['Url']
@State = params['State']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
label_tmp = Label.new
label_tmp.deserialize(i)
@Labels << label_tmp
end
end
@LastScrape = params['LastScrape']
@ScrapeDuration = params['ScrapeDuration']
@Error = params['Error']
end
end
# 模板实例
class PrometheusTemp < TencentCloud::Common::AbstractModel
# @param Name: 模板名称
# @type Name: String
# @param Level: 模板维度，支持以下类型
# instance 实例级别
# cluster 集群级别
# @type Level: String
# @param Describe: 模板描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Describe: String
# @param RecordRules: 当Level为instance时有效，
# 模板中的聚合规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordRules: Array
# @param ServiceMonitors: 当Level为cluster时有效，
# 模板中的ServiceMonitor规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceMonitors: Array
# @param PodMonitors: 当Level为cluster时有效，
# 模板中的PodMonitors规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodMonitors: Array
# @param RawJobs: 当Level为cluster时有效，
# 模板中的RawJobs规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RawJobs: Array
# @param TemplateId: 模板的ID, 用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateId: String
# @param UpdateTime: 最近更新时间，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
# @param Version: 当前版本，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
# @param IsDefault: 是否系统提供的默认模板，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsDefault: Boolean
# @param AlertDetailRules: 当Level为instance时有效，
# 模板中的告警配置列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertDetailRules: Array
# @param TargetsTotal: 关联实例数目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TargetsTotal: Integer
attr_accessor :Name, :Level, :Describe, :RecordRules, :ServiceMonitors, :PodMonitors, :RawJobs, :TemplateId, :UpdateTime, :Version, :IsDefault, :AlertDetailRules, :TargetsTotal
def initialize(name=nil, level=nil, describe=nil, recordrules=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, templateid=nil, updatetime=nil, version=nil, isdefault=nil, alertdetailrules=nil, targetstotal=nil)
@Name = name
@Level = level
@Describe = describe
@RecordRules = recordrules
@ServiceMonitors = servicemonitors
@PodMonitors = podmonitors
@RawJobs = rawjobs
@TemplateId = templateid
@UpdateTime = updatetime
@Version = version
@IsDefault = isdefault
@AlertDetailRules = alertdetailrules
@TargetsTotal = targetstotal
end
def deserialize(params)
@Name = params['Name']
@Level = params['Level']
@Describe = params['Describe']
unless params['RecordRules'].nil?
@RecordRules = []
params['RecordRules'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RecordRules << prometheusconfigitem_tmp
end
end
unless params['ServiceMonitors'].nil?
@ServiceMonitors = []
params['ServiceMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@ServiceMonitors << prometheusconfigitem_tmp
end
end
unless params['PodMonitors'].nil?
@PodMonitors = []
params['PodMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@PodMonitors << prometheusconfigitem_tmp
end
end
unless params['RawJobs'].nil?
@RawJobs = []
params['RawJobs'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RawJobs << prometheusconfigitem_tmp
end
end
@TemplateId = params['TemplateId']
@UpdateTime = params['UpdateTime']
@Version = params['Version']
@IsDefault = params['IsDefault']
unless params['AlertDetailRules'].nil?
@AlertDetailRules = []
params['AlertDetailRules'].each do |i|
prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new
prometheusalertpolicyitem_tmp.deserialize(i)
@AlertDetailRules << prometheusalertpolicyitem_tmp
end
end
@TargetsTotal = params['TargetsTotal']
end
end
# 云原生Prometheus模板可修改项
class PrometheusTempModify < TencentCloud::Common::AbstractModel
# @param Name: 修改名称
# @type Name: String
# @param Describe: 修改描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Describe: String
# @param ServiceMonitors: 当Level为cluster时有效，
# 模板中的ServiceMonitor规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceMonitors: Array
# @param PodMonitors: 当Level为cluster时有效，
# 模板中的PodMonitors规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodMonitors: Array
# @param RawJobs: 当Level为cluster时有效，
# 模板中的RawJobs规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RawJobs: Array
# @param RecordRules: 当Level为instance时有效，
# 模板中的聚合规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordRules: Array
# @param AlertDetailRules: 修改内容，只有当模板类型是Alert时生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertDetailRules: Array
attr_accessor :Name, :Describe, :ServiceMonitors, :PodMonitors, :RawJobs, :RecordRules, :AlertDetailRules
def initialize(name=nil, describe=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, recordrules=nil, alertdetailrules=nil)
@Name = name
@Describe = describe
@ServiceMonitors = servicemonitors
@PodMonitors = podmonitors
@RawJobs = rawjobs
@RecordRules = recordrules
@AlertDetailRules = alertdetailrules
end
def deserialize(params)
@Name = params['Name']
@Describe = params['Describe']
unless params['ServiceMonitors'].nil?
@ServiceMonitors = []
params['ServiceMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@ServiceMonitors << prometheusconfigitem_tmp
end
end
unless params['PodMonitors'].nil?
@PodMonitors = []
params['PodMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@PodMonitors << prometheusconfigitem_tmp
end
end
unless params['RawJobs'].nil?
@RawJobs = []
params['RawJobs'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RawJobs << prometheusconfigitem_tmp
end
end
unless params['RecordRules'].nil?
@RecordRules = []
params['RecordRules'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RecordRules << prometheusconfigitem_tmp
end
end
unless params['AlertDetailRules'].nil?
@AlertDetailRules = []
params['AlertDetailRules'].each do |i|
prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new
prometheusalertpolicyitem_tmp.deserialize(i)
@AlertDetailRules << prometheusalertpolicyitem_tmp
end
end
end
end
# 模板实例
class PrometheusTemplate < TencentCloud::Common::AbstractModel
# @param Name: 模板名称
# @type Name: String
# @param Level: 模板维度，支持以下类型
# instance 实例级别
# cluster 集群级别
# @type Level: String
# @param Describe: 模板描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Describe: String
# @param AlertRules: 当Level为instance时有效，
# 模板中的告警配置列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertRules: Array
# @param RecordRules: 当Level为instance时有效，
# 模板中的聚合规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordRules: Array
# @param ServiceMonitors: 当Level为cluster时有效，
# 模板中的ServiceMonitor规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceMonitors: Array
# @param PodMonitors: 当Level为cluster时有效，
# 模板中的PodMonitors规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodMonitors: Array
# @param RawJobs: 当Level为cluster时有效，
# 模板中的RawJobs规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RawJobs: Array
# @param TemplateId: 模板的ID, 用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateId: String
# @param UpdateTime: 最近更新时间，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
# @param Version: 当前版本，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
# @param IsDefault: 是否系统提供的默认模板，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsDefault: Boolean
# @param AlertDetailRules: 当Level为instance时有效，
# 模板中的告警配置列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertDetailRules: Array
attr_accessor :Name, :Level, :Describe, :AlertRules, :RecordRules, :ServiceMonitors, :PodMonitors, :RawJobs, :TemplateId, :UpdateTime, :Version, :IsDefault, :AlertDetailRules
def initialize(name=nil, level=nil, describe=nil, alertrules=nil, recordrules=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, templateid=nil, updatetime=nil, version=nil, isdefault=nil, alertdetailrules=nil)
@Name = name
@Level = level
@Describe = describe
@AlertRules = alertrules
@RecordRules = recordrules
@ServiceMonitors = servicemonitors
@PodMonitors = podmonitors
@RawJobs = rawjobs
@TemplateId = templateid
@UpdateTime = updatetime
@Version = version
@IsDefault = isdefault
@AlertDetailRules = alertdetailrules
end
def deserialize(params)
@Name = params['Name']
@Level = params['Level']
@Describe = params['Describe']
unless params['AlertRules'].nil?
@AlertRules = []
params['AlertRules'].each do |i|
prometheusalertrule_tmp = PrometheusAlertRule.new
prometheusalertrule_tmp.deserialize(i)
@AlertRules << prometheusalertrule_tmp
end
end
unless params['RecordRules'].nil?
@RecordRules = []
params['RecordRules'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RecordRules << prometheusconfigitem_tmp
end
end
unless params['ServiceMonitors'].nil?
@ServiceMonitors = []
params['ServiceMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@ServiceMonitors << prometheusconfigitem_tmp
end
end
unless params['PodMonitors'].nil?
@PodMonitors = []
params['PodMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@PodMonitors << prometheusconfigitem_tmp
end
end
unless params['RawJobs'].nil?
@RawJobs = []
params['RawJobs'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RawJobs << prometheusconfigitem_tmp
end
end
@TemplateId = params['TemplateId']
@UpdateTime = params['UpdateTime']
@Version = params['Version']
@IsDefault = params['IsDefault']
unless params['AlertDetailRules'].nil?
@AlertDetailRules = []
params['AlertDetailRules'].each do |i|
prometheusalertruledetail_tmp = PrometheusAlertRuleDetail.new
prometheusalertruledetail_tmp.deserialize(i)
@AlertDetailRules << prometheusalertruledetail_tmp
end
end
end
end
# 云原生Prometheus模板可修改项
class PrometheusTemplateModify < TencentCloud::Common::AbstractModel
# @param Name: 修改名称
# @type Name: String
# @param Describe: 修改描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Describe: String
# @param AlertRules: 修改内容，只有当模板类型是Alert时生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertRules: Array
# @param RecordRules: 当Level为instance时有效，
# 模板中的聚合规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordRules: Array
# @param ServiceMonitors: 当Level为cluster时有效，
# 模板中的ServiceMonitor规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceMonitors: Array
# @param PodMonitors: 当Level为cluster时有效，
# 模板中的PodMonitors规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodMonitors: Array
# @param RawJobs: 当Level为cluster时有效，
# 模板中的RawJobs规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RawJobs: Array
# @param AlertDetailRules: 修改内容，只有当模板类型是Alert时生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertDetailRules: Array
attr_accessor :Name, :Describe, :AlertRules, :RecordRules, :ServiceMonitors, :PodMonitors, :RawJobs, :AlertDetailRules
def initialize(name=nil, describe=nil, alertrules=nil, recordrules=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, alertdetailrules=nil)
@Name = name
@Describe = describe
@AlertRules = alertrules
@RecordRules = recordrules
@ServiceMonitors = servicemonitors
@PodMonitors = podmonitors
@RawJobs = rawjobs
@AlertDetailRules = alertdetailrules
end
def deserialize(params)
@Name = params['Name']
@Describe = params['Describe']
unless params['AlertRules'].nil?
@AlertRules = []
params['AlertRules'].each do |i|
prometheusalertrule_tmp = PrometheusAlertRule.new
prometheusalertrule_tmp.deserialize(i)
@AlertRules << prometheusalertrule_tmp
end
end
unless params['RecordRules'].nil?
@RecordRules = []
params['RecordRules'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RecordRules << prometheusconfigitem_tmp
end
end
unless params['ServiceMonitors'].nil?
@ServiceMonitors = []
params['ServiceMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@ServiceMonitors << prometheusconfigitem_tmp
end
end
unless params['PodMonitors'].nil?
@PodMonitors = []
params['PodMonitors'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@PodMonitors << prometheusconfigitem_tmp
end
end
unless params['RawJobs'].nil?
@RawJobs = []
params['RawJobs'].each do |i|
prometheusconfigitem_tmp = PrometheusConfigItem.new
prometheusconfigitem_tmp.deserialize(i)
@RawJobs << prometheusconfigitem_tmp
end
end
unless params['AlertDetailRules'].nil?
@AlertDetailRules = []
params['AlertDetailRules'].each do |i|
prometheusalertruledetail_tmp = PrometheusAlertRuleDetail.new
prometheusalertruledetail_tmp.deserialize(i)
@AlertDetailRules << prometheusalertruledetail_tmp
end
end
end
end
# 云原生Prometheus模板同步目标
class PrometheusTemplateSyncTarget < TencentCloud::Common::AbstractModel
# @param Region: 目标所在地域
# @type Region: String
# @param InstanceId: 目标实例
# @type InstanceId: String
# @param ClusterId: 集群id，只有当采集模板的Level为cluster的时候需要
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
# @param SyncTime: 最后一次同步时间， 用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SyncTime: String
# @param Version: 当前使用的模板版本，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
# @param ClusterType: 集群类型，只有当采集模板的Level为cluster的时候需要
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterType: String
# @param InstanceName: 用于出参，实例名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceName: String
# @param ClusterName: 用于出参，集群名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterName: String
attr_accessor :Region, :InstanceId, :ClusterId, :SyncTime, :Version, :ClusterType, :InstanceName, :ClusterName
def initialize(region=nil, instanceid=nil, clusterid=nil, synctime=nil, version=nil, clustertype=nil, instancename=nil, clustername=nil)
@Region = region
@InstanceId = instanceid
@ClusterId = clusterid
@SyncTime = synctime
@Version = version
@ClusterType = clustertype
@InstanceName = instancename
@ClusterName = clustername
end
def deserialize(params)
@Region = params['Region']
@InstanceId = params['InstanceId']
@ClusterId = params['ClusterId']
@SyncTime = params['SyncTime']
@Version = params['Version']
@ClusterType = params['ClusterType']
@InstanceName = params['InstanceName']
@ClusterName = params['ClusterName']
end
end
# 地域属性信息
class RegionInstance < TencentCloud::Common::AbstractModel
# @param RegionName: 地域名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionName: String
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: Integer
# @param Status: 地域状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: String
# @param FeatureGates: 地域特性开关(按照JSON的形式返回所有属性)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FeatureGates: String
# @param Alias: 地域简称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Alias: String
# @param Remark: 地域白名单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
attr_accessor :RegionName, :RegionId, :Status, :FeatureGates, :Alias, :Remark
def initialize(regionname=nil, regionid=nil, status=nil, featuregates=nil, _alias=nil, remark=nil)
@RegionName = regionname
@RegionId = regionid
@Status = status
@FeatureGates = featuregates
@Alias = _alias
@Remark = remark
end
def deserialize(params)
@RegionName = params['RegionName']
@RegionId = params['RegionId']
@Status = params['Status']
@FeatureGates = params['FeatureGates']
@Alias = params['Alias']
@Remark = params['Remark']
end
end
# RemoveNodeFromNodePool请求参数结构体
class RemoveNodeFromNodePoolRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param InstanceIds: 节点id列表，一次最多支持100台
# @type InstanceIds: Array
attr_accessor :ClusterId, :NodePoolId, :InstanceIds
def initialize(clusterid=nil, nodepoolid=nil, instanceids=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@InstanceIds = instanceids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@InstanceIds = params['InstanceIds']
end
end
# RemoveNodeFromNodePool返回参数结构体
class RemoveNodeFromNodePoolResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 资源删除选项
class ResourceDeleteOption < TencentCloud::Common::AbstractModel
# @param ResourceType: 资源类型，例如CBS
# @type ResourceType: String
# @param DeleteMode: 集群删除时资源的删除模式：terminate（销毁），retain （保留）
# @type DeleteMode: String
attr_accessor :ResourceType, :DeleteMode
def initialize(resourcetype=nil, deletemode=nil)
@ResourceType = resourcetype
@DeleteMode = deletemode
end
def deserialize(params)
@ResourceType = params['ResourceType']
@DeleteMode = params['DeleteMode']
end
end
# 集群资源使用量
class ResourceUsage < TencentCloud::Common::AbstractModel
# @param Name: 资源类型
# @type Name: String
# @param Usage: 资源使用量
# @type Usage: Integer
# @param Details: 资源使用详情
# @type Details: Array
attr_accessor :Name, :Usage, :Details
def initialize(name=nil, usage=nil, details=nil)
@Name = name
@Usage = usage
@Details = details
end
def deserialize(params)
@Name = params['Name']
@Usage = params['Usage']
unless params['Details'].nil?
@Details = []
params['Details'].each do |i|
resourceusagedetail_tmp = ResourceUsageDetail.new
resourceusagedetail_tmp.deserialize(i)
@Details << resourceusagedetail_tmp
end
end
end
end
# 资源使用明细
class ResourceUsageDetail < TencentCloud::Common::AbstractModel
# @param Name: 资源名称
# @type Name: String
# @param Usage: 资源使用量
# @type Usage: Integer
attr_accessor :Name, :Usage
def initialize(name=nil, usage=nil)
@Name = name
@Usage = usage
end
def deserialize(params)
@Name = params['Name']
@Usage = params['Usage']
end
end
# RestartEKSContainerInstances请求参数结构体
class RestartEKSContainerInstancesRequest < TencentCloud::Common::AbstractModel
# @param EksCiIds: EKS instance ids
# @type EksCiIds: Array
attr_accessor :EksCiIds
def initialize(eksciids=nil)
@EksCiIds = eksciids
end
def deserialize(params)
@EksCiIds = params['EksCiIds']
end
end
# RestartEKSContainerInstances返回参数结构体
class RestartEKSContainerInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 集群路由对象
class RouteInfo < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param DestinationCidrBlock: 目的端CIDR。
# @type DestinationCidrBlock: String
# @param GatewayIp: 下一跳地址。
# @type GatewayIp: String
attr_accessor :RouteTableName, :DestinationCidrBlock, :GatewayIp
def initialize(routetablename=nil, destinationcidrblock=nil, gatewayip=nil)
@RouteTableName = routetablename
@DestinationCidrBlock = destinationcidrblock
@GatewayIp = gatewayip
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
@DestinationCidrBlock = params['DestinationCidrBlock']
@GatewayIp = params['GatewayIp']
end
end
# 路由表冲突对象
class RouteTableConflict < TencentCloud::Common::AbstractModel
# @param RouteTableType: 路由表类型。
# @type RouteTableType: String
# @param RouteTableCidrBlock: 路由表CIDR。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableCidrBlock: String
# @param RouteTableName: 路由表名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableName: String
# @param RouteTableId: 路由表ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RouteTableId: String
attr_accessor :RouteTableType, :RouteTableCidrBlock, :RouteTableName, :RouteTableId
def initialize(routetabletype=nil, routetablecidrblock=nil, routetablename=nil, routetableid=nil)
@RouteTableType = routetabletype
@RouteTableCidrBlock = routetablecidrblock
@RouteTableName = routetablename
@RouteTableId = routetableid
end
def deserialize(params)
@RouteTableType = params['RouteTableType']
@RouteTableCidrBlock = params['RouteTableCidrBlock']
@RouteTableName = params['RouteTableName']
@RouteTableId = params['RouteTableId']
end
end
# 集群路由表对象
class RouteTableInfo < TencentCloud::Common::AbstractModel
# @param RouteTableName: 路由表名称。
# @type RouteTableName: String
# @param RouteTableCidrBlock: 路由表CIDR。
# @type RouteTableCidrBlock: String
# @param VpcId: VPC实例ID。
# @type VpcId: String
attr_accessor :RouteTableName, :RouteTableCidrBlock, :VpcId
def initialize(routetablename=nil, routetablecidrblock=nil, vpcid=nil)
@RouteTableName = routetablename
@RouteTableCidrBlock = routetablecidrblock
@VpcId = vpcid
end
def deserialize(params)
@RouteTableName = params['RouteTableName']
@RouteTableCidrBlock = params['RouteTableCidrBlock']
@VpcId = params['VpcId']
end
end
# 描述了 “云自动化助手” 服务相关的信息
class RunAutomationServiceEnabled < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启云自动化助手。取值范围：
TRUE：表示开启云自动化助手服务
FALSE：表示不开启云自动化助手服务
默认取值：FALSE。
# @type Enabled: Boolean
attr_accessor :Enabled
def initialize(enabled=nil)
@Enabled = enabled
end
def deserialize(params)
@Enabled = params['Enabled']
end
end
# 不同角色的节点配置参数
class RunInstancesForNode < TencentCloud::Common::AbstractModel
# @param NodeRole: 节点角色，取值:MASTER_ETCD, WORKER。MASTER_ETCD只有在创建 INDEPENDENT_CLUSTER 独立集群时需要指定。MASTER_ETCD节点数量为3～7，建议为奇数。MASTER_ETCD节点最小配置为4C8G。
# @type NodeRole: String
# @param RunInstancesPara: CVM创建透传参数，json化字符串格式，详见[CVM创建实例](https://cloud.tencent.com/document/product/213/15730)接口，传入公共参数外的其他参数即可，其中ImageId会替换为TKE集群OS对应的镜像。
# @type RunInstancesPara: Array
# @param InstanceAdvancedSettingsOverrides: 节点高级设置，该参数会覆盖集群级别设置的InstanceAdvancedSettings，和上边的RunInstancesPara按照顺序一一对应（当前只对节点自定义参数ExtraArgs生效）。
# @type InstanceAdvancedSettingsOverrides: Array
attr_accessor :NodeRole, :RunInstancesPara, :InstanceAdvancedSettingsOverrides
def initialize(noderole=nil, runinstancespara=nil, instanceadvancedsettingsoverrides=nil)
@NodeRole = noderole
@RunInstancesPara = runinstancespara
@InstanceAdvancedSettingsOverrides = instanceadvancedsettingsoverrides
end
def deserialize(params)
@NodeRole = params['NodeRole']
@RunInstancesPara = params['RunInstancesPara']
unless params['InstanceAdvancedSettingsOverrides'].nil?
@InstanceAdvancedSettingsOverrides = []
params['InstanceAdvancedSettingsOverrides'].each do |i|
instanceadvancedsettings_tmp = InstanceAdvancedSettings.new
instanceadvancedsettings_tmp.deserialize(i)
@InstanceAdvancedSettingsOverrides << instanceadvancedsettings_tmp
end
end
end
end
# 描述了 “云监控” 服务相关的信息
class RunMonitorServiceEnabled < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启[云监控](/document/product/248)服务。取值范围：
TRUE：表示开启云监控服务
FALSE：表示不开启云监控服务
默认取值：TRUE。
# @type Enabled: Boolean
attr_accessor :Enabled
def initialize(enabled=nil)
@Enabled = enabled
end
def deserialize(params)
@Enabled = params['Enabled']
end
end
# 描述了 “云安全” 服务相关的信息
class RunSecurityServiceEnabled < TencentCloud::Common::AbstractModel
# @param Enabled: 是否开启[云安全](/document/product/296)服务。取值范围：
TRUE：表示开启云安全服务
FALSE：表示不开启云安全服务
默认取值：TRUE。
# @type Enabled: Boolean
attr_accessor :Enabled
def initialize(enabled=nil)
@Enabled = enabled
end
def deserialize(params)
@Enabled = params['Enabled']
end
end
# ScaleInClusterMaster请求参数结构体
class ScaleInClusterMasterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群实例ID
# @type ClusterId: String
# @param ScaleInMasters: master缩容选项
# @type ScaleInMasters: Array
attr_accessor :ClusterId, :ScaleInMasters
def initialize(clusterid=nil, scaleinmasters=nil)
@ClusterId = clusterid
@ScaleInMasters = scaleinmasters
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['ScaleInMasters'].nil?
@ScaleInMasters = []
params['ScaleInMasters'].each do |i|
scaleinmaster_tmp = ScaleInMaster.new
scaleinmaster_tmp.deserialize(i)
@ScaleInMasters << scaleinmaster_tmp
end
end
end
end
# ScaleInClusterMaster返回参数结构体
class ScaleInClusterMasterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# master节点缩容参数
class ScaleInMaster < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param NodeRole: 缩容的实例角色：MASTER,ETCD,MASTER_ETCD
# @type NodeRole: String
# @param InstanceDeleteMode: 实例的保留模式
# @type InstanceDeleteMode: String
attr_accessor :InstanceId, :NodeRole, :InstanceDeleteMode
def initialize(instanceid=nil, noderole=nil, instancedeletemode=nil)
@InstanceId = instanceid
@NodeRole = noderole
@InstanceDeleteMode = instancedeletemode
end
def deserialize(params)
@InstanceId = params['InstanceId']
@NodeRole = params['NodeRole']
@InstanceDeleteMode = params['InstanceDeleteMode']
end
end
# ScaleOutClusterMaster请求参数结构体
class ScaleOutClusterMasterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群实例ID
# @type ClusterId: String
# @param RunInstancesForNode: 新建节点参数
# @type RunInstancesForNode: Array
# @param ExistedInstancesForNode: 添加已有节点相关参数
# @type ExistedInstancesForNode: Array
# @param InstanceAdvancedSettings: 实例高级设置
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param ExtraArgs: 集群master组件自定义参数
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.ClusterExtraArgs`
attr_accessor :ClusterId, :RunInstancesForNode, :ExistedInstancesForNode, :InstanceAdvancedSettings, :ExtraArgs
def initialize(clusterid=nil, runinstancesfornode=nil, existedinstancesfornode=nil, instanceadvancedsettings=nil, extraargs=nil)
@ClusterId = clusterid
@RunInstancesForNode = runinstancesfornode
@ExistedInstancesForNode = existedinstancesfornode
@InstanceAdvancedSettings = instanceadvancedsettings
@ExtraArgs = extraargs
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['RunInstancesForNode'].nil?
@RunInstancesForNode = []
params['RunInstancesForNode'].each do |i|
runinstancesfornode_tmp = RunInstancesForNode.new
runinstancesfornode_tmp.deserialize(i)
@RunInstancesForNode << runinstancesfornode_tmp
end
end
unless params['ExistedInstancesForNode'].nil?
@ExistedInstancesForNode = []
params['ExistedInstancesForNode'].each do |i|
existedinstancesfornode_tmp = ExistedInstancesForNode.new
existedinstancesfornode_tmp.deserialize(i)
@ExistedInstancesForNode << existedinstancesfornode_tmp
end
end
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
unless params['ExtraArgs'].nil?
@ExtraArgs = ClusterExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
end
end
# ScaleOutClusterMaster返回参数结构体
class ScaleOutClusterMasterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# cloudrun安全特性
class SecurityContext < TencentCloud::Common::AbstractModel
# @param Capabilities: 安全能力清单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Capabilities: :class:`Tencentcloud::Tke.v20180525.models.Capabilities`
attr_accessor :Capabilities
def initialize(capabilities=nil)
@Capabilities = capabilities
end
def deserialize(params)
unless params['Capabilities'].nil?
@Capabilities = Capabilities.new
@Capabilities.deserialize(params['Capabilities'])
end
end
end
# ServiceAccount认证相关配置
class ServiceAccountAuthenticationOptions < TencentCloud::Common::AbstractModel
# @param Issuer: service-account-issuer
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Issuer: String
# @param JWKSURI: service-account-jwks-uri
# 注意：此字段可能返回 null，表示取不到有效值。
# @type JWKSURI: String
# @param AutoCreateDiscoveryAnonymousAuth: 如果为true，则会自动创建允许匿名用户访问'/.well-known/openid-configuration'和/openid/v1/jwks的rbac规则
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoCreateDiscoveryAnonymousAuth: Boolean
attr_accessor :Issuer, :JWKSURI, :AutoCreateDiscoveryAnonymousAuth
def initialize(issuer=nil, jwksuri=nil, autocreatediscoveryanonymousauth=nil)
@Issuer = issuer
@JWKSURI = jwksuri
@AutoCreateDiscoveryAnonymousAuth = autocreatediscoveryanonymousauth
end
def deserialize(params)
@Issuer = params['Issuer']
@JWKSURI = params['JWKSURI']
@AutoCreateDiscoveryAnonymousAuth = params['AutoCreateDiscoveryAnonymousAuth']
end
end
# SetNodePoolNodeProtection请求参数结构体
class SetNodePoolNodeProtectionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param NodePoolId: 节点池id
# @type NodePoolId: String
# @param InstanceIds: 节点id
# @type InstanceIds: Array
# @param ProtectedFromScaleIn: 节点是否需要移出保护
# @type ProtectedFromScaleIn: Boolean
attr_accessor :ClusterId, :NodePoolId, :InstanceIds, :ProtectedFromScaleIn
def initialize(clusterid=nil, nodepoolid=nil, instanceids=nil, protectedfromscalein=nil)
@ClusterId = clusterid
@NodePoolId = nodepoolid
@InstanceIds = instanceids
@ProtectedFromScaleIn = protectedfromscalein
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NodePoolId = params['NodePoolId']
@InstanceIds = params['InstanceIds']
@ProtectedFromScaleIn = params['ProtectedFromScaleIn']
end
end
# SetNodePoolNodeProtection返回参数结构体
class SetNodePoolNodeProtectionResponse < TencentCloud::Common::AbstractModel
# @param SucceedInstanceIds: 成功设置的节点id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SucceedInstanceIds: Array
# @param FailedInstanceIds: 没有成功设置的节点id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedInstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SucceedInstanceIds, :FailedInstanceIds, :RequestId
def initialize(succeedinstanceids=nil, failedinstanceids=nil, requestid=nil)
@SucceedInstanceIds = succeedinstanceids
@FailedInstanceIds = failedinstanceids
@RequestId = requestid
end
def deserialize(params)
@SucceedInstanceIds = params['SucceedInstanceIds']
@FailedInstanceIds = params['FailedInstanceIds']
@RequestId = params['RequestId']
end
end
# 子网信息
class SubnetInfos < TencentCloud::Common::AbstractModel
# @param SubnetId: 子网id
# @type SubnetId: String
# @param Name: 子网节点名称
# @type Name: String
attr_accessor :SubnetId, :Name
def initialize(subnetid=nil, name=nil)
@SubnetId = subnetid
@Name = name
end
def deserialize(params)
@SubnetId = params['SubnetId']
@Name = params['Name']
end
end
# SyncPrometheusTemp请求参数结构体
class SyncPrometheusTempRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 实例id
# @type TemplateId: String
# @param Targets: 同步目标
# @type Targets: Array
attr_accessor :TemplateId, :Targets
def initialize(templateid=nil, targets=nil)
@TemplateId = templateid
@Targets = targets
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
end
end
# SyncPrometheusTemp返回参数结构体
class SyncPrometheusTempResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# SyncPrometheusTemplate请求参数结构体
class SyncPrometheusTemplateRequest < TencentCloud::Common::AbstractModel
# @param TemplateId: 实例id
# @type TemplateId: String
# @param Targets: 同步目标
# @type Targets: Array
attr_accessor :TemplateId, :Targets
def initialize(templateid=nil, targets=nil)
@TemplateId = templateid
@Targets = targets
end
def deserialize(params)
@TemplateId = params['TemplateId']
unless params['Targets'].nil?
@Targets = []
params['Targets'].each do |i|
prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new
prometheustemplatesynctarget_tmp.deserialize(i)
@Targets << prometheustemplatesynctarget_tmp
end
end
end
end
# SyncPrometheusTemplate返回参数结构体
class SyncPrometheusTemplateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 标签绑定的资源类型，当前支持类型："cluster"
class Tag < TencentCloud::Common::AbstractModel
# @param Key: 标签键
# @type Key: String
# @param Value: 标签值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# 标签描述列表。通过指定该参数可以同时绑定标签到相应的资源实例，当前仅支持绑定标签到云主机实例。
class TagSpecification < TencentCloud::Common::AbstractModel
# @param ResourceType: 标签绑定的资源类型，当前支持类型："cluster"
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceType: String
# @param Tags: 标签对列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
attr_accessor :ResourceType, :Tags
def initialize(resourcetype=nil, tags=nil)
@ResourceType = resourcetype
@Tags = tags
end
def deserialize(params)
@ResourceType = params['ResourceType']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
end
end
# kubernetes Taint
class Taint < TencentCloud::Common::AbstractModel
# @param Key: Key
# @type Key: String
# @param Value: Value
# @type Value: String
# @param Effect: Effect
# @type Effect: String
attr_accessor :Key, :Value, :Effect
def initialize(key=nil, value=nil, effect=nil)
@Key = key
@Value = value
@Effect = effect
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
@Effect = params['Effect']
end
end
# 任务步骤信息
class TaskStepInfo < TencentCloud::Common::AbstractModel
# @param Step: 步骤名称
# @type Step: String
# @param LifeState: 生命周期
# pending : 步骤未开始
# running: 步骤执行中
# success: 步骤成功完成
# failed: 步骤失败
# @type LifeState: String
# @param StartAt: 步骤开始时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartAt: String
# @param EndAt: 步骤结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndAt: String
# @param FailedMsg: 若步骤生命周期为failed,则此字段显示错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedMsg: String
attr_accessor :Step, :LifeState, :StartAt, :EndAt, :FailedMsg
def initialize(step=nil, lifestate=nil, startat=nil, endat=nil, failedmsg=nil)
@Step = step
@LifeState = lifestate
@StartAt = startat
@EndAt = endat
@FailedMsg = failedmsg
end
def deserialize(params)
@Step = params['Step']
@LifeState = params['LifeState']
@StartAt = params['StartAt']
@EndAt = params['EndAt']
@FailedMsg = params['FailedMsg']
end
end
# 探针使用TcpSocket检测容器
class TcpSocket < TencentCloud::Common::AbstractModel
# @param Port: TcpSocket检测的端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Port: Integer
attr_accessor :Port
def initialize(port=nil)
@Port = port
end
def deserialize(params)
@Port = params['Port']
end
end
# UninstallLogAgent请求参数结构体
class UninstallLogAgentRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# UninstallLogAgent返回参数结构体
class UninstallLogAgentResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateClusterVersion请求参数结构体
class UpdateClusterVersionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 Id
# @type ClusterId: String
# @param DstVersion: 需要升级到的版本
# @type DstVersion: String
# @param ExtraArgs: 集群自定义参数
# @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.ClusterExtraArgs`
# @param MaxNotReadyPercent: 可容忍的最大不可用pod数目
# @type MaxNotReadyPercent: Float
# @param SkipPreCheck: 是否跳过预检查阶段
# @type SkipPreCheck: Boolean
attr_accessor :ClusterId, :DstVersion, :ExtraArgs, :MaxNotReadyPercent, :SkipPreCheck
def initialize(clusterid=nil, dstversion=nil, extraargs=nil, maxnotreadypercent=nil, skipprecheck=nil)
@ClusterId = clusterid
@DstVersion = dstversion
@ExtraArgs = extraargs
@MaxNotReadyPercent = maxnotreadypercent
@SkipPreCheck = skipprecheck
end
def deserialize(params)
@ClusterId = params['ClusterId']
@DstVersion = params['DstVersion']
unless params['ExtraArgs'].nil?
@ExtraArgs = ClusterExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
@MaxNotReadyPercent = params['MaxNotReadyPercent']
@SkipPreCheck = params['SkipPreCheck']
end
end
# UpdateClusterVersion返回参数结构体
class UpdateClusterVersionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateEKSCluster请求参数结构体
class UpdateEKSClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 弹性集群Id
# @type ClusterId: String
# @param ClusterName: 弹性集群名称
# @type ClusterName: String
# @param ClusterDesc: 弹性集群描述信息
# @type ClusterDesc: String
# @param SubnetIds: 子网Id 列表
# @type SubnetIds: Array
# @param PublicLB: 弹性容器集群公网访问LB信息
# @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.ClusterPublicLB`
# @param InternalLB: 弹性容器集群内网访问LB信息
# @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.ClusterInternalLB`
# @param ServiceSubnetId: Service 子网Id
# @type ServiceSubnetId: String
# @param DnsServers: 集群自定义的dns 服务器信息
# @type DnsServers: Array
# @param ClearDnsServer: 是否清空自定义dns 服务器设置。为1 表示 是。其他表示 否。
# @type ClearDnsServer: String
# @param NeedDeleteCbs: 将来删除集群时是否要删除cbs。默认为 FALSE
# @type NeedDeleteCbs: Boolean
# @param ProxyLB: 标记是否是新的内外网。默认为false
# @type ProxyLB: Boolean
# @param ExtraParam: 扩展参数。须是map[string]string 的json 格式。
# @type ExtraParam: String
attr_accessor :ClusterId, :ClusterName, :ClusterDesc, :SubnetIds, :PublicLB, :InternalLB, :ServiceSubnetId, :DnsServers, :ClearDnsServer, :NeedDeleteCbs, :ProxyLB, :ExtraParam
def initialize(clusterid=nil, clustername=nil, clusterdesc=nil, subnetids=nil, publiclb=nil, internallb=nil, servicesubnetid=nil, dnsservers=nil, cleardnsserver=nil, needdeletecbs=nil, proxylb=nil, extraparam=nil)
@ClusterId = clusterid
@ClusterName = clustername
@ClusterDesc = clusterdesc
@SubnetIds = subnetids
@PublicLB = publiclb
@InternalLB = internallb
@ServiceSubnetId = servicesubnetid
@DnsServers = dnsservers
@ClearDnsServer = cleardnsserver
@NeedDeleteCbs = needdeletecbs
@ProxyLB = proxylb
@ExtraParam = extraparam
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterDesc = params['ClusterDesc']
@SubnetIds = params['SubnetIds']
unless params['PublicLB'].nil?
@PublicLB = ClusterPublicLB.new
@PublicLB.deserialize(params['PublicLB'])
end
unless params['InternalLB'].nil?
@InternalLB = ClusterInternalLB.new
@InternalLB.deserialize(params['InternalLB'])
end
@ServiceSubnetId = params['ServiceSubnetId']
unless params['DnsServers'].nil?
@DnsServers = []
params['DnsServers'].each do |i|
dnsserverconf_tmp = DnsServerConf.new
dnsserverconf_tmp.deserialize(i)
@DnsServers << dnsserverconf_tmp
end
end
@ClearDnsServer = params['ClearDnsServer']
@NeedDeleteCbs = params['NeedDeleteCbs']
@ProxyLB = params['ProxyLB']
@ExtraParam = params['ExtraParam']
end
end
# UpdateEKSCluster返回参数结构体
class UpdateEKSClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateEKSContainerInstance请求参数结构体
class UpdateEKSContainerInstanceRequest < TencentCloud::Common::AbstractModel
# @param EksCiId: 容器实例 ID
# @type EksCiId: String
# @param RestartPolicy: 实例重启策略： Always(总是重启)、Never(从不重启)、OnFailure(失败时重启)
# @type RestartPolicy: String
# @param EksCiVolume: 数据卷，包含NfsVolume数组和CbsVolume数组
# @type EksCiVolume: :class:`Tencentcloud::Tke.v20180525.models.EksCiVolume`
# @param Containers: 容器组
# @type Containers: Array
# @param InitContainers: Init 容器组
# @type InitContainers: Array
# @param Name: 容器实例名称
# @type Name: String
# @param ImageRegistryCredentials: 镜像仓库凭证数组
# @type ImageRegistryCredentials: Array
attr_accessor :EksCiId, :RestartPolicy, :EksCiVolume, :Containers, :InitContainers, :Name, :ImageRegistryCredentials
def initialize(eksciid=nil, restartpolicy=nil, ekscivolume=nil, containers=nil, initcontainers=nil, name=nil, imageregistrycredentials=nil)
@EksCiId = eksciid
@RestartPolicy = restartpolicy
@EksCiVolume = ekscivolume
@Containers = containers
@InitContainers = initcontainers
@Name = name
@ImageRegistryCredentials = imageregistrycredentials
end
def deserialize(params)
@EksCiId = params['EksCiId']
@RestartPolicy = params['RestartPolicy']
unless params['EksCiVolume'].nil?
@EksCiVolume = EksCiVolume.new
@EksCiVolume.deserialize(params['EksCiVolume'])
end
unless params['Containers'].nil?
@Containers = []
params['Containers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@Containers << container_tmp
end
end
unless params['InitContainers'].nil?
@InitContainers = []
params['InitContainers'].each do |i|
container_tmp = Container.new
container_tmp.deserialize(i)
@InitContainers << container_tmp
end
end
@Name = params['Name']
unless params['ImageRegistryCredentials'].nil?
@ImageRegistryCredentials = []
params['ImageRegistryCredentials'].each do |i|
imageregistrycredential_tmp = ImageRegistryCredential.new
imageregistrycredential_tmp.deserialize(i)
@ImageRegistryCredentials << imageregistrycredential_tmp
end
end
end
end
# UpdateEKSContainerInstance返回参数结构体
class UpdateEKSContainerInstanceResponse < TencentCloud::Common::AbstractModel
# @param EksCiId: 容器实例 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EksCiId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EksCiId, :RequestId
def initialize(eksciid=nil, requestid=nil)
@EksCiId = eksciid
@RequestId = requestid
end
def deserialize(params)
@EksCiId = params['EksCiId']
@RequestId = params['RequestId']
end
end
# UpdateImageCache请求参数结构体
class UpdateImageCacheRequest < TencentCloud::Common::AbstractModel
# @param ImageCacheId: 镜像缓存Id
# @type ImageCacheId: String
# @param ImageCacheName: 镜像缓存名称
# @type ImageCacheName: String
attr_accessor :ImageCacheId, :ImageCacheName
def initialize(imagecacheid=nil, imagecachename=nil)
@ImageCacheId = imagecacheid
@ImageCacheName = imagecachename
end
def deserialize(params)
@ImageCacheId = params['ImageCacheId']
@ImageCacheName = params['ImageCacheName']
end
end
# UpdateImageCache返回参数结构体
class UpdateImageCacheResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateTKEEdgeCluster请求参数结构体
class UpdateTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 边缘计算集群ID
# @type ClusterId: String
# @param ClusterName: 边缘计算集群名称
# @type ClusterName: String
# @param ClusterDesc: 边缘计算集群描述信息
# @type ClusterDesc: String
# @param PodCIDR: 边缘计算集群的pod cidr
# @type PodCIDR: String
# @param ServiceCIDR: 边缘计算集群的service cidr
# @type ServiceCIDR: String
# @param PublicLB: 边缘计算集群公网访问LB信息
# @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
# @param InternalLB: 边缘计算集群内网访问LB信息
# @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterInternalLB`
# @param CoreDns: 边缘计算集群的CoreDns部署信息
# @type CoreDns: String
# @param HealthRegion: 边缘计算集群的健康检查多地域部署信息
# @type HealthRegion: String
# @param Health: 边缘计算集群的健康检查部署信息
# @type Health: String
# @param GridDaemon: 边缘计算集群的GridDaemon部署信息
# @type GridDaemon: String
attr_accessor :ClusterId, :ClusterName, :ClusterDesc, :PodCIDR, :ServiceCIDR, :PublicLB, :InternalLB, :CoreDns, :HealthRegion, :Health, :GridDaemon
def initialize(clusterid=nil, clustername=nil, clusterdesc=nil, podcidr=nil, servicecidr=nil, publiclb=nil, internallb=nil, coredns=nil, healthregion=nil, health=nil, griddaemon=nil)
@ClusterId = clusterid
@ClusterName = clustername
@ClusterDesc = clusterdesc
@PodCIDR = podcidr
@ServiceCIDR = servicecidr
@PublicLB = publiclb
@InternalLB = internallb
@CoreDns = coredns
@HealthRegion = healthregion
@Health = health
@GridDaemon = griddaemon
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterDesc = params['ClusterDesc']
@PodCIDR = params['PodCIDR']
@ServiceCIDR = params['ServiceCIDR']
unless params['PublicLB'].nil?
@PublicLB = EdgeClusterPublicLB.new
@PublicLB.deserialize(params['PublicLB'])
end
unless params['InternalLB'].nil?
@InternalLB = EdgeClusterInternalLB.new
@InternalLB.deserialize(params['InternalLB'])
end
@CoreDns = params['CoreDns']
@HealthRegion = params['HealthRegion']
@Health = params['Health']
@GridDaemon = params['GridDaemon']
end
end
# UpdateTKEEdgeCluster返回参数结构体
class UpdateTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 可升级节点信息
class UpgradeAbleInstancesItem < TencentCloud::Common::AbstractModel
# @param InstanceId: 节点Id
# @type InstanceId: String
# @param Version: 节点的当前版本
# @type Version: String
# @param LatestVersion: 当前版本的最新小版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestVersion: String
attr_accessor :InstanceId, :Version, :LatestVersion
def initialize(instanceid=nil, version=nil, latestversion=nil)
@InstanceId = instanceid
@Version = version
@LatestVersion = latestversion
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Version = params['Version']
@LatestVersion = params['LatestVersion']
end
end
# UpgradeClusterInstances请求参数结构体
class UpgradeClusterInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Operation: create 表示开始一次升级任务
# pause 表示停止任务
# resume表示继续任务
# abort表示终止任务
# @type Operation: String
# @param UpgradeType: 升级类型，只有Operation是create需要设置
# reset 大版本重装升级
# hot 小版本热升级
# major 大版本原地升级
# @type UpgradeType: String
# @param InstanceIds: 需要升级的节点列表
# @type InstanceIds: Array
# @param ResetParam: 当节点重新加入集群时候所使用的参数，参考添加已有节点接口
# @type ResetParam: :class:`Tencentcloud::Tke.v20180525.models.UpgradeNodeResetParam`
# @param SkipPreCheck: 是否忽略节点升级前检查
# @type SkipPreCheck: Boolean
# @param MaxNotReadyPercent: 最大可容忍的不可用Pod比例
# @type MaxNotReadyPercent: Float
attr_accessor :ClusterId, :Operation, :UpgradeType, :InstanceIds, :ResetParam, :SkipPreCheck, :MaxNotReadyPercent
def initialize(clusterid=nil, operation=nil, upgradetype=nil, instanceids=nil, resetparam=nil, skipprecheck=nil, maxnotreadypercent=nil)
@ClusterId = clusterid
@Operation = operation
@UpgradeType = upgradetype
@InstanceIds = instanceids
@ResetParam = resetparam
@SkipPreCheck = skipprecheck
@MaxNotReadyPercent = maxnotreadypercent
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Operation = params['Operation']
@UpgradeType = params['UpgradeType']
@InstanceIds = params['InstanceIds']
unless params['ResetParam'].nil?
@ResetParam = UpgradeNodeResetParam.new
@ResetParam.deserialize(params['ResetParam'])
end
@SkipPreCheck = params['SkipPreCheck']
@MaxNotReadyPercent = params['MaxNotReadyPercent']
end
end
# UpgradeClusterInstances返回参数结构体
class UpgradeClusterInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 节点升级重装参数
class UpgradeNodeResetParam < TencentCloud::Common::AbstractModel
# @param InstanceAdvancedSettings: 实例额外需要设置参数信息
# @type InstanceAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.InstanceAdvancedSettings`
# @param EnhancedService: 增强服务。通过该参数可以指定是否开启云安全、云监控等服务。若不指定该参数，则默认开启云监控、云安全服务。
# @type EnhancedService: :class:`Tencentcloud::Tke.v20180525.models.EnhancedService`
# @param LoginSettings: 节点登录信息（目前仅支持使用Password或者单个KeyIds）
# @type LoginSettings: :class:`Tencentcloud::Tke.v20180525.models.LoginSettings`
# @param SecurityGroupIds: 实例所属安全组。该参数可以通过调用 DescribeSecurityGroups 的返回值中的sgId字段来获取。若不指定该参数，则绑定默认安全组。（目前仅支持设置单个sgId）
# @type SecurityGroupIds: Array
attr_accessor :InstanceAdvancedSettings, :EnhancedService, :LoginSettings, :SecurityGroupIds
def initialize(instanceadvancedsettings=nil, enhancedservice=nil, loginsettings=nil, securitygroupids=nil)
@InstanceAdvancedSettings = instanceadvancedsettings
@EnhancedService = enhancedservice
@LoginSettings = loginsettings
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
unless params['InstanceAdvancedSettings'].nil?
@InstanceAdvancedSettings = InstanceAdvancedSettings.new
@InstanceAdvancedSettings.deserialize(params['InstanceAdvancedSettings'])
end
unless params['EnhancedService'].nil?
@EnhancedService = EnhancedService.new
@EnhancedService.deserialize(params['EnhancedService'])
end
unless params['LoginSettings'].nil?
@LoginSettings = LoginSettings.new
@LoginSettings.deserialize(params['LoginSettings'])
end
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# 版本信息
class VersionInstance < TencentCloud::Common::AbstractModel
# @param Name: 版本名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Version: 版本信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
# @param Remark: Remark
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
attr_accessor :Name, :Version, :Remark
def initialize(name=nil, version=nil, remark=nil)
@Name = name
@Version = version
@Remark = remark
end
def deserialize(params)
@Name = params['Name']
@Version = params['Version']
@Remark = params['Remark']
end
end
# 数据卷挂载路径信息
class VolumeMount < TencentCloud::Common::AbstractModel
# @param Name: volume名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param MountPath: 挂载路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MountPath: String
# @param ReadOnly: 是否只读
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReadOnly: Boolean
# @param SubPath: 子路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubPath: String
# @param MountPropagation: 传播挂载方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MountPropagation: String
# @param SubPathExpr: 子路径表达式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubPathExpr: String
attr_accessor :Name, :MountPath, :ReadOnly, :SubPath, :MountPropagation, :SubPathExpr
def initialize(name=nil, mountpath=nil, readonly=nil, subpath=nil, mountpropagation=nil, subpathexpr=nil)
@Name = name
@MountPath = mountpath
@ReadOnly = readonly
@SubPath = subpath
@MountPropagation = mountpropagation
@SubPathExpr = subpathexpr
end
def deserialize(params)
@Name = params['Name']
@MountPath = params['MountPath']
@ReadOnly = params['ReadOnly']
@SubPath = params['SubPath']
@MountPropagation = params['MountPropagation']
@SubPathExpr = params['SubPathExpr']
end
end
end
end
end