Cereals and pulsesSpecifications and test methodsRiceCéréales et légumineusesSpécification et méthodes d'essaiRiz1730117301ISOISOen30922016ISOFood productsCereals and pulsesRice Group22016-05-01Foreword
ISO (the International Organization for Standardization)
is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 4, Cereals and pulses.
This second edition cancels and replaces the first edition (ISO 17301-1:2009), which has been technically revised.
The main changes compared to the previous edition are:
updated normative references;
deletion of 4.3.
A list of all parts in the ISO 17301 series can be found on the ISO website.
A Foreword shall appear in each document. The generic text is shown here. It does not contain requirements, recommendations or permissions.
For further information on the Foreword, see ISO/IEC Directives, Part 2, 2016, Clause 12.
Introduction
This document was developed in response to worldwide demand for minimum specifications for rice traded internationally, since most commercial bulks of grain, which have not been screened or aspirated, contain a proportion of other grains, weed seeds, chaff, straw, stones, sand, etc. The vegetable materials can have physical and biological properties which differ from those of the main constituent and can therefore affect the storage behaviour.
Rice is a permanent host to a considerable microflora; most of these microorganisms are cosmopolitan, the majority are innocuous, but some produce harmful by-products. Microflora communities present on freshly harvested rice include many types of bacteria, moulds and yeasts. While the rice is ripening and its moisture content is falling, the number of field microorganisms, mainly bacteria, diminishes. When the rice is harvested, it is invaded by storage microorganisms and the field microflora gradually dies out. If the mass fraction of moisture (formerly expressed as moisture content) is less than 18 %, the microflora does not multiply, whereas above 18 % it does so rapidly. Thus, at harvest, the qualitative and the quantitative composition of the microflora depends more upon ecological factors than upon the variety of the rice. During transport and storage, additions to the microfloral population occur. Microorganisms on the rice at harvest tend to die out during storage and are replaced by microorganisms adapted to storage conditions.
Storage losses have been estimated as being an average of 5 %, and as much as 30 %, especially in countries with climates favourable to the rapid development of agents of deterioration and where storage techniques are poorly developed, such as developing countries in the damp tropics. The magnitude of these figures highlights the need to promote throughout the world a rapid improvement in techniques of conservation.
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning sample dividers given in and shown in .
ISO takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO. Information may be obtained from:
Vache Equipment
Fictitious
World
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO shall not be held responsible for identifying any or all such patent rights.
Scope
This document specifies minimum requirements and test methods for rice (Oryza sativa L.).
It is applicable to husked rice, husked parboiled rice, milled rice and milled parboiled rice, suitable for human consumption, directly or after reconditioning.
It is not applicable to cooked rice products.
Terms and Definitionspaddypaddy ricerough rice
rice retaining its husk after threshing
3.1husked ricecargo rice
paddy () from which the husk only has been removed
3.2
The term "cargo rice" is shown as deprecated, and Note 1 to entry is not included here
milled ricewhite rice
husked rice () from which almost all of the bran and embryo have been removed by milling
3.3parboiled rice
rice whose starch has been fully gelatinized by soaking paddy () rice or husked rice () in water followed by a heat treatment and a drying process
waxy rice
variety of rice whose kernels have a white and opaque appearance
The starch of waxy rice consists almost entirely of amylopectin. The kernels have a tendency to stick together after cooking.
extraneous matterEMrice
organic and inorganic components other than whole or broken kernels
Foreign seeds, husks, bran, sand, dust.
HDKheat-damaged kernel
kernel, whole or broken, which has changed its normal colour as a result of heating
This category includes whole or broken kernels that are yellow due to alteration. Parboiled rice in a batch of non-parboiled rice is also included in this category.
damaged kernel
kernel, whole or broken, showing obvious deterioration due to moisture, pests, disease or other causes, but excluding HDK ()
immature kernelunripe kernel
kernel, whole or broken, which is unripe and/or underdeveloped
husked rice yield
amount of husked rice obtained from paddy
3.1nitrogen content
quantity of nitrogen determined after application of the procedure described
It is expressed as a mass fraction of dry product, as a percentage.
3.1crude protein content
quantity of crude protein obtained from the nitrogen content as determined by applying the specified method, calculated by multiplying this content by an appropriate factor depending on the type of cereal or pulse
It is expressed as a mass fraction of dry product, as a percentage.
3.1gelatinization
hydration process conferring the jelly-like state typical of the coagulated colloids, which are named gels, on kernels
See .
3.1gel state
condition reached as a consequence of gelatinization (), when the kernel is fully transparent and absolutely free from whitish and opaque granules after being pressed between two glass sheets
3.1gelatinization timet_90
time necessary for 90 % of the kernels to pass from their natural state to the gel state ()
3.1SpecificationsGeneral, organoleptic and health characteristics
Kernels of rice, whether parboiled, husked or milled, and whether whole or broken, shall be sound, clean and free from foreign odours or odour which indicates deterioration.
The levels of additives and pesticide residues and other contaminants shall not exceed the maximum limits permitted in the country of destination.
The presence of living insects which are visible to the naked eye is not permitted. This should be determined before separating the bulk sample into test samples.
Physical and chemical characteristics
The mass fraction of moisture, determined in accordance with , using an oven complying with the requirements of , shall not be greater than 15 %.
Formerly denoted as 15 % (m/m).
The mass fraction of extraneous matter and defective kernels in husked and milled rice, whether or not parboiled, determined in accordance with , shall not be greater than the values specified in .
Lower mass fractions of moisture are sometimes needed for certain destinations depending on the climate, duration of transport and storage. For further details, see , and .
The defect tolerance for the categories considered, and determined in accordance with the method given in , shall not exceed the limits given in .
Maximum permissible mass fraction of defects
Defect
Maximum permissible mass fraction of defects in husked rice w_max
in husked rice
in milled rice (non-glutinous)
in husked parboiled rice
in milled parboiled rice
Extraneous matter: organic
Organic extraneous matter includes foreign seeds, husks, bran, parts of straw, etc.
1,0
0,5
1,0
0,5
Extraneous matter: inorganic
Inorganic extraneous matter includes stones, sand, dust, etc.
0,5
0,5
0,5
0,5
Paddy
2,5
0,3
2,5
0,3
Husked rice, non-parboiled
Not applicable
1,0
1,0
1,0
Milled rice, non-parboiled
1,0
Not applicable
1,0
1,0
Husked rice, parboiled
1,0
1,0
Not applicable
1,0
Milled rice, parboiled
1,0
1,0
1,0
Not applicable
Chips
0,1
0,1
0,1
0,1
HDK
2,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
2,0
2,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
2,0
Damaged kernels
4,0
3,0
4,0
3,0
Immature and/or malformed kernels
8,0
2,0
8,0
2,0
Chalky kernels
5,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
5,0
Not applicable
Not applicable
Red kernels and red-streaked kernels
12,0
12,0
12,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
12,0
Partly gelatinized kernels
Not applicable
Not applicable
11,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
11,0
Pecks
Not applicable
Not applicable
4,0
2,0
Waxy rice
1,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
1,0
1,0
The maximum permissible mass fraction of defects shall be determined with respect to the mass fraction obtained after milling.
1,0
Live insects shall not be present. Dead insects shall be included in extraneous matter.
This table is based on 1.
Some commercial contracts require information in addition to that provided in this table.
Only full red husked (cargo) rice is considered in this table.
Sampling
Sampling shall be carried out in accordance with 5
Test methodsMoisture content
Determine the mass fraction of moisture in accordance with the method specified in .
Waxy rice content
Determine the mass fraction of waxy rice. gives an example of a suitable method.
Nitrogen content and crude protein content
Determine the nitrogen content and crude protein content in accordance with either 9, or . For details on the determination of protein content using the Kjeldahl method, see Reference in the Bibliography. For details concerning the use of the Dumas method, see References and .
Calculate the crude protein content of the dry product by multiplying the value of the nitrogen content by the conversion factor specified in C and Table C.1, that is adapted to the type of cereals or pulses and to their use.
Gelatinization time
Determine the gelatinization time, t_90, for rice kernels during cooking. An example of a typical curve is given in . Three typical stages of gelatinization are shown in .
Report the results as specified in .
Husked rice yieldDetermination
Only use paddy or parboiled rice for the determination of husked rice yield.
Determine the husked rice yield in accordance with .
PrecisionInterlaboratory test
The results of an interlaboratory test are given in for information
Repeatability
The absolute difference between two independent single test results, obtained using the same method on identical test material in the same laboratory by the same operator using the same equipment within a short interval of time, shall not exceed the arithmetic mean of the values for r obtained from the interlaboratory study for husked rice in more than 5 % of cases:
r = 1 %
r
is the repeatability limit.
Reproducibility
The absolute difference between two single test results, obtained using the same method on identical test material in different laboratories by different operators using different equipment, shall not exceed the arithmetic mean of the values for R obtained from the interlaboratory study in more than 5 % of cases:
R = 3 %
R
is the reproducibility limit.
Test report
For each test method, the test report shall specify the following:
all information necessary for the complete identification of the sample;
a reference to this document (i.e. ISO 17301-1);
the sampling method used;
the test method used;
the test result(s) obtained or, if the repeatability has been checked, the final quoted result obtained;
all operating details not specified in this document, or regarded as optional, together with details of any incidents which may have influenced the test result(s);
any unusual features (anomalies) observed during the test;
the date of the test.
Packaging
The packaging shall not transmit any odour or flavour to the product and shall not contain substances which may damage the product or constitute a health risk.
If bags are used, they shall comply with the requirements of 9, or , as appropriate.
Marking
The packages shall be marked or labelled as required by the country of destination.
Determination of defectsPrinciple
Extraneous matter, broken kernels, damaged kernels and other kinds of rice are separated manually according to the following types: husked rice, milled rice, husked parboiled rice and milled parboiled rice. Each type is then weighed.
Apparatus
The usual laboratory apparatus and, in particular, the following.
Sample divider,
consisting of a conical sample divider or multiple-slot sample divider with a distribution system, e.g. "Split-it-right" sample divider, such as that shown in .
Sieve,
with round perforations of diameter 1,4 mm.
Tweezers.Scalpel.Paintbrush.Steel bowls,
of diameter 100 mm ± 5 mm; seven per test sample.
Balance,
which can be read to the nearest 0,01 g.
Sampling
See .
ProcedurePreparation of test sample
Carefully mix the laboratory sample to make it as uniform as possible, then proceed to reduce it, using a divider (), until a quantity of about 30 g is obtained.
All parts of kernels which get stuck in the perforations of a sieve should be considered to be retained by the sieve.
Split-it-right sample dividerDetermination
Weigh, to the nearest 0,1 g, one of the test samples obtained in accordance with and separate the different defects into the bowls (). When a kernel has several defects, classify it in the defect category for which the maximum permissible value is the lowest (see ).
Weigh, to the nearest 0,01 g, the fractions so obtained.
Calculation
Express the mass fraction of each defect using :
w = (m_D) / (m_s)
w
is the mass fraction of grains with a particular defect in the test sample;
m_D
is the mass, in grams, of grains with that defect;
m_S
is the mass, in grams, of the test sample.
Test report
Report the results as specified in .
Determination of the waxy rice content of parboiled ricePrinciple
Waxy rice kernels have a reddish brown colour when stained in an iodine solution, while non-waxy rice kernels show a dark blue colour.
Apparatus
The usual laboratory apparatus and, in particular, the following.
Balance,
capable of weighing to the nearest 0,01 g.
Glass beaker,
of capacity 250 ml.
Small white colour bowls,
or any white colour container of a suitable size.
Wire sieve,
with long rounded apertures of (1 mm {:(+0.02),(0):} mm) × (20 mm {:(+2),(-1):} mm).
Stirrer rod.Tweezers or forceps.Tissue paper.Reagents
Direct contact of iodine with skin can cause lesions so care should be taken in handling iodine. Iodine vapour is very irritating to eyes and mucous membranes.
Deionized water,
Grade 3 quality as specified in .
Iodine stock solution,
containing a mass fraction of 4,1 % iodine and 6,3 % potassium iodide in deionized water such as Lugols.
Lugols is an example of a suitable product available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of this product.
Iodine working solution,
obtained by diluting the stock solution () two times (by volume) with deionized water ().
Prepare fresh daily.
Sampling
Sampling shall be carried out in accordance with .
Determination
Weigh a portion of about 100 g of milled rice and put it into a glass beaker ().
Add enough iodine working solution () to soak the kernels, and stir () until all the kernels are submerged under the solution. Let the kernels soak in the solution for 30 s.
Pour the rice and solution into a wire sieve (), and shake the basket slightly in order to drain out the solution. Then place the wire sieve on a piece of tissue paper () to absorb the excess liquid.
Pour the stained kernels into a bowl (). Using tweezers or forceps (), separate the reddish brown kernels of waxy rice from the dark blue kernels of non-waxy rice.
Weigh the waxy rice portion (m_1) and the non-waxy rice portion (m_2) to the nearest 0,1 g.
Calculation
Calculate the mass fraction, expressed as a percentage, of the waxy rice, w_(wax), using :
w_(wax) = (m_1) / (m_1 + m_2) xx 100
m_1
is the mass, expressed in grams, of the waxy rice portion;
m_2
is the mass, expressed in grams, of the non-waxy rice portion.
Test report
Report the results as specified in , giving the results calculated using .
Gelatinization
gives an example of a typical gelatinization curve. shows the three stages of gelatinization.
Typical gelatinization curve
The time t_90 was estimated to be 18,2 min for this example.
w
mass fraction of gelatinized kernels, expressed in per cent
t
cooking time, expressed in minutes
t_90
time required to gelatinize 90 % of the kernels
P
point of the curve corresponding to a cooking time of t_90
These results are based on a study carried out on three different types of kernel.
Initial stages: No grains are fully gelatinized (ungelatinized starch granules are visible inside the kernels)Intermediate stages: Some fully gelatinized kernels are visibleFinal stages: All kernels are fully gelatinizedResults of interlaboratory test for husked rice yields
An interlaboratory test was carried out by the ENR [Rice Research Centre (Italy)] in accordance with and , with the participation of 15 laboratories. Each laboratory carried out three determinations on four different types of kernel. The statistical results are shown in .
Repeatability and reproducibility of husked rice yield
Description
Rice sample
Arborio
Drago
Parboiled rice.
Balilla
Thaibonnet
Number of laboratories retained after eliminating outliers
13
11
13
13
Mean value, g/100 g
81,2
82,0
81,8
77,7
Standard deviation of repeatability, s_r, g/100 g
0,41
0,15
0,31
0,53
Coefficient of variation of repeatability, %
0,5
0,2
0,4
0,7
Repeatability limit, r (= 2,83 s_r)
1,16
0,42
0,88
1,50
Standard deviation of reproducibility, s_R, g/100 g
1,02
0,20
0,80
2,14
Coefficient of variation of reproducibility, %
1,3
0,2
1,0
2,7
Reproducibility limit, R (= 2,83 s_R)
2,89
0,57
2,26
6,06
Extraneous information
This appendix is not in the original Rice model document, and is inserted to illustrate elements absent fromthat document: block quotes, source code, and examples.
1ISO
This International Standard gives the minimum specifications for rice (Oryza sativa L.) which is subject to international trade. It is applicable to the following types: husked rice and milled rice, parboiled or not, intended for direct human consumption. It is neither applicable to other products derived from rice, nor to waxy rice (glutinous rice).
puts "Hello, world."
%w{a b c}.each do |x| 1
puts x
end
This is an annotation
Normative ReferencesCereals and cereal products — Determination of moisture content — Reference methodISO 712ISORice — Determination of the potential milling yield from paddy and from husked riceISO 6646ISOPackaging — Method of specification for sacks — Part 1: Paper sacksISO 8351-11994ISOPackaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible filmISO 8351-2ISOCereals, pulses, milled cereal products, oilseeds and animal feeding stuffs — Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein contentISO 16634--ISOISO DATE: Under preparation. (Stage at the time of publication ISO/DIS 16634)Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl methodISO 204832013ISOCereals and cereal products — SamplingISO 243332009ISOBibliographyWater for analytical laboratory use — Specification and test methodsISO 3696ISOAccuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitionsISO 5725-1ISOAccuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement methodISO 5725-2ISOStorage of cereals and pulses — Part 1: General recommendations for the keeping of cerealsISO 6322-1ISOStorage of cereals and pulses — Part 2: Practical recommendationsISO 6322-2ISOStorage of cereals and pulses — Part 3: Control of attack by pestsISO 6322-3ISORice — SpecificationISO 73012011ISORice — Evaluation of gelatinization time of kernels during cookingISO 148641998ISOSafety requirements for electric equipment for measurement, control, and laboratory use — Part 2: Particular requirements for laboratory equipment for the heating of materialIEC 61010-21998IECStandard No I.C.C 167. Determination of the protein content in cereal and cereal products for food and animal feeding stuffs according to the Dumas combustion method (see )[10]Nitrogen-ammonia-protein modified Kjeldahl method — Titanium oxide and copper sulfate catalyst. Official Methods and Recommended Practices of the AOCS (ed. Firestone, D.E.), AOCS Official Method Ba Ai 4-91, 1997, AOCS Press, Champaign, IL[11]Berner D.L., & Brown J. Protein nitrogen combustion method collaborative study I. Comparison with Smalley total Kjeldahl nitrogen and combustion results. J. Am. Oil Chem. Soc. 1994, 71 (11) pp 1291-1293[12]Buckee G.K. Determination of total nitrogen in barley, malt and beer by Kjeldahl procedures and the Dumas combustion method — Collaborative trial. J. Inst. Brew. 1994, 100 (2) pp 57-64[13]Frister H.Direct determination of nitrogen content by Dumas analysis; Interlaboratory study on precision characteristics. AOAC International, Europe Section 4th International Symposium, Nyon, Switzerland, 1994, 33 pp[14]Ranghino F. Evaluation of rice resistance to cooking, based on the gelatinization time of kernels. Il Riso. 1966, XV pp 117-127[15]Tkachuk R. Nitrogen-to-protein conversion factors for cereals and oilseed meals. Cereal Chem. 1969, 46 (4) pp 419-423[16]