<?xml version="1.0" ?>
<!--
Copyright (c) 1996-2016, F5 Networks, Inc., Seattle, Washington. All rights reserved.  

F5, F5 Networks, the F5 logo, BIG-IP, 3-DNS, iControl, GLOBAL-SITE, SEE-IT, EDGE-FX, FireGuard, Internet Control Architecture, IP Application Switch, iRules, PACKET VELOCITY, SYN Check, CONTROL YOUR WORLD, OneConnect, ZoneRunner, uRoam, FirePass, and TrafficShield are registered trademarks or trademarks of F5 Networks, Inc., in the U.S. and certain other countries. 

All other trademarks mentioned in this document are the property of their respective owners. F5 Networks' trademarks may not be used in connection with any product or service except as permitted in writing by F5.

-->
<definitions name="Networking.Tunnel"
	targetNamespace="urn:iControl"
	xmlns:tns="urn:iControl"
	xmlns:xsd="http://www.w3.org/2001/XMLSchema"
	xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
	xmlns="http://schemas.xmlsoap.org/wsdl/">

<!-- types -->

<types>
	<xsd:schema targetNamespace='urn:iControl'
		xmlns='http://www.w3.org/2001/XMLSchema'
		xmlns:SOAP-ENC='http://schemas.xmlsoap.org/soap/encoding/'
		xmlns:wsdl='http://schemas.xmlsoap.org/wsdl/'>
		<xsd:simpleType name="Common.EnabledState">
			<xsd:restriction base="xsd:string">
				<xsd:enumeration value="STATE_DISABLED">
					<xsd:annotation>
						<xsd:documentation>STATE_DISABLED</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="STATE_ENABLED">
					<xsd:annotation>
						<xsd:documentation>STATE_ENABLED</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
			</xsd:restriction>
		</xsd:simpleType>
		<xsd:simpleType name="Common.AutoLasthop">
			<xsd:restriction base="xsd:string">
				<xsd:enumeration value="AUTO_LASTHOP_UNKNOWN">
					<xsd:annotation>
						<xsd:documentation>AUTO_LASTHOP_UNKNOWN</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="AUTO_LASTHOP_DEFAULT">
					<xsd:annotation>
						<xsd:documentation>AUTO_LASTHOP_DEFAULT</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="AUTO_LASTHOP_ENABLED">
					<xsd:annotation>
						<xsd:documentation>AUTO_LASTHOP_ENABLED</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="AUTO_LASTHOP_DISABLED">
					<xsd:annotation>
						<xsd:documentation>AUTO_LASTHOP_DISABLED</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
			</xsd:restriction>
		</xsd:simpleType>
		<xsd:complexType name="Common.StringSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='xsd:string[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntryV2Sequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.L2TunnelFDBEntryV2[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntry">
			<xsd:sequence>
				<xsd:element name="mac_address" type="xsd:string"/>
				<xsd:element name="endpoint" type="xsd:string"/>
			</xsd:sequence>
		</xsd:complexType>
		<xsd:simpleType name="Networking.Tunnel.TunnelDirection">
			<xsd:restriction base="xsd:string">
				<xsd:enumeration value="TUNNEL_DIRECTION_UNKNOWN">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_DIRECTION_UNKNOWN</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_DIRECTION_INBOUND">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_DIRECTION_INBOUND</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_DIRECTION_OUTBOUND">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_DIRECTION_OUTBOUND</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_DIRECTION_BIDIRECTIONAL">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_DIRECTION_BIDIRECTIONAL</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
			</xsd:restriction>
		</xsd:simpleType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntryV2SequenceSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.L2TunnelFDBEntryV2Sequence[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Common.ULongSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='xsd:long[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.TunnelProfileAttribute">
			<xsd:sequence>
				<xsd:element name="profile_type" type="tns:Networking.TunnelProfileType"/>
				<xsd:element name="profile_name" type="xsd:string"/>
			</xsd:sequence>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntrySequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.L2TunnelFDBEntry[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntrySequenceSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.L2TunnelFDBEntrySequence[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.L2TunnelFDBEntryV2">
			<xsd:sequence>
				<xsd:element name="mac_address" type="xsd:string"/>
				<xsd:element name="endpoint" type="xsd:string"/>
				<xsd:element name="replicators" type="tns:Common.IPAddressSequence"/>
			</xsd:sequence>
		</xsd:complexType>
		<xsd:complexType name="Common.IPAddressSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='xsd:string[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:simpleType name="Networking.TunnelProfileType">
			<xsd:restriction base="xsd:string">
				<xsd:enumeration value="TUNNEL_PROFILE_UNKNOWN">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_UNKNOWN</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_ETHERIP">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_ETHERIP</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_FEC">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_FEC</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_GRE">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_GRE</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_IPIP">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_IPIP</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_PPP">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_PPP</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_TCPFORWARD">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_TCPFORWARD</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_VXLAN">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_VXLAN</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_WCCPGRE">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_WCCPGRE</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_V6RD">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_V6RD</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_IPSEC">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_IPSEC</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
				<xsd:enumeration value="TUNNEL_PROFILE_GENEVE">
					<xsd:annotation>
						<xsd:documentation>TUNNEL_PROFILE_GENEVE</xsd:documentation>
					</xsd:annotation>
				</xsd:enumeration>
			</xsd:restriction>
		</xsd:simpleType>
		<xsd:complexType name="Common.AutoLasthopSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Common.AutoLasthop[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.TunnelDirectionSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.TunnelDirection[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Networking.Tunnel.TunnelProfileAttributeSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Networking.Tunnel.TunnelProfileAttribute[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
		<xsd:complexType name="Common.EnabledStateSequence">
			<xsd:complexContent>
				<xsd:restriction base='SOAP-ENC:Array'>
					<xsd:attribute ref='SOAP-ENC:arrayType' wsdl:arrayType='tns:Common.EnabledState[]'/>
				</xsd:restriction>
			</xsd:complexContent>
		</xsd:complexType>
	</xsd:schema>
</types>

<!-- message -->

<message name="Networking.Tunnel.get_listRequest">
</message>
<message name="Networking.Tunnel.get_listResponse">
	<part name="return" type="tns:Common.StringSequence"/>
</message>

<message name="Networking.Tunnel.createRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="local_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="remote_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="profiles" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.createResponse">
</message>

<message name="Networking.Tunnel.delete_tunnelRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.delete_tunnelResponse">
</message>

<message name="Networking.Tunnel.delete_all_tunnelsRequest">
</message>
<message name="Networking.Tunnel.delete_all_tunnelsResponse">
</message>

<message name="Networking.Tunnel.set_local_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="addresses" type="tns:Common.IPAddressSequence"/>
</message>
<message name="Networking.Tunnel.set_local_addressResponse">
</message>

<message name="Networking.Tunnel.get_local_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_local_addressResponse">
	<part name="return" type="tns:Common.IPAddressSequence"/>
</message>

<message name="Networking.Tunnel.set_remote_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="addresses" type="tns:Common.IPAddressSequence"/>
</message>
<message name="Networking.Tunnel.set_remote_addressResponse">
</message>

<message name="Networking.Tunnel.get_remote_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_remote_addressResponse">
	<part name="return" type="tns:Common.IPAddressSequence"/>
</message>

<message name="Networking.Tunnel.set_directionRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="directions" type="tns:Networking.Tunnel.TunnelDirectionSequence"/>
</message>
<message name="Networking.Tunnel.set_directionResponse">
</message>

<message name="Networking.Tunnel.get_directionRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_directionResponse">
	<part name="return" type="tns:Networking.Tunnel.TunnelDirectionSequence"/>
</message>

<message name="Networking.Tunnel.set_profileRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="profiles" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.set_profileResponse">
</message>

<message name="Networking.Tunnel.get_profileRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_profileResponse">
	<part name="return" type="tns:Common.StringSequence"/>
</message>

<message name="Networking.Tunnel.get_profile_v2Request">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_profile_v2Response">
	<part name="return" type="tns:Networking.Tunnel.TunnelProfileAttributeSequence"/>
</message>

<message name="Networking.Tunnel.set_mtuRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="mtus" type="tns:Common.ULongSequence"/>
</message>
<message name="Networking.Tunnel.set_mtuResponse">
</message>

<message name="Networking.Tunnel.get_mtuRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_mtuResponse">
	<part name="return" type="tns:Common.ULongSequence"/>
</message>

<message name="Networking.Tunnel.set_tosRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="values" type="tns:Common.ULongSequence"/>
</message>
<message name="Networking.Tunnel.set_tosResponse">
</message>

<message name="Networking.Tunnel.get_tosRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_tosResponse">
	<part name="return" type="tns:Common.ULongSequence"/>
</message>

<message name="Networking.Tunnel.set_auto_lasthopRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="values" type="tns:Common.AutoLasthopSequence"/>
</message>
<message name="Networking.Tunnel.set_auto_lasthopResponse">
</message>

<message name="Networking.Tunnel.get_auto_lasthopRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_auto_lasthopResponse">
	<part name="return" type="tns:Common.AutoLasthopSequence"/>
</message>

<message name="Networking.Tunnel.set_descriptionRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="descriptions" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.set_descriptionResponse">
</message>

<message name="Networking.Tunnel.get_descriptionRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_descriptionResponse">
	<part name="return" type="tns:Common.StringSequence"/>
</message>

<message name="Networking.Tunnel.set_transparent_stateRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="states" type="tns:Common.EnabledStateSequence"/>
</message>
<message name="Networking.Tunnel.set_transparent_stateResponse">
</message>

<message name="Networking.Tunnel.get_transparent_stateRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_transparent_stateResponse">
	<part name="return" type="tns:Common.EnabledStateSequence"/>
</message>

<message name="Networking.Tunnel.set_idle_timeoutRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="timeouts" type="tns:Common.ULongSequence"/>
</message>
<message name="Networking.Tunnel.set_idle_timeoutResponse">
</message>

<message name="Networking.Tunnel.get_idle_timeoutRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_idle_timeoutResponse">
	<part name="return" type="tns:Common.ULongSequence"/>
</message>

<message name="Networking.Tunnel.create_with_transparent_stateRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="local_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="remote_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="profiles" type="tns:Common.StringSequence"/>
	<part name="states" type="tns:Common.EnabledStateSequence"/>
</message>
<message name="Networking.Tunnel.create_with_transparent_stateResponse">
</message>

<message name="Networking.Tunnel.set_local_address_with_transparent_stateRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="addresses" type="tns:Common.IPAddressSequence"/>
	<part name="states" type="tns:Common.EnabledStateSequence"/>
</message>
<message name="Networking.Tunnel.set_local_address_with_transparent_stateResponse">
</message>

<message name="Networking.Tunnel.set_keyRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="keys" type="tns:Common.ULongSequence"/>
</message>
<message name="Networking.Tunnel.set_keyResponse">
</message>

<message name="Networking.Tunnel.get_keyRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_keyResponse">
	<part name="return" type="tns:Common.ULongSequence"/>
</message>

<message name="Networking.Tunnel.get_mac_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_mac_addressResponse">
	<part name="return" type="tns:Common.StringSequence"/>
</message>

<message name="Networking.Tunnel.create_with_keyRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="local_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="remote_addresses" type="tns:Common.IPAddressSequence"/>
	<part name="profiles" type="tns:Common.StringSequence"/>
	<part name="keys" type="tns:Common.ULongSequence"/>
</message>
<message name="Networking.Tunnel.create_with_keyResponse">
</message>

<message name="Networking.Tunnel.get_static_forwardingRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_static_forwardingResponse">
	<part name="return" type="tns:Networking.Tunnel.L2TunnelFDBEntrySequenceSequence"/>
</message>

<message name="Networking.Tunnel.add_static_forwardingRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="entries" type="tns:Networking.Tunnel.L2TunnelFDBEntrySequenceSequence"/>
</message>
<message name="Networking.Tunnel.add_static_forwardingResponse">
</message>

<message name="Networking.Tunnel.remove_static_forwardingRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="entries" type="tns:Networking.Tunnel.L2TunnelFDBEntrySequenceSequence"/>
</message>
<message name="Networking.Tunnel.remove_static_forwardingResponse">
</message>

<message name="Networking.Tunnel.remove_all_static_forwardingsRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.remove_all_static_forwardingsResponse">
</message>

<message name="Networking.Tunnel.set_secondary_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="addresses" type="tns:Common.IPAddressSequence"/>
</message>
<message name="Networking.Tunnel.set_secondary_addressResponse">
</message>

<message name="Networking.Tunnel.get_secondary_addressRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_secondary_addressResponse">
	<part name="return" type="tns:Common.IPAddressSequence"/>
</message>

<message name="Networking.Tunnel.set_traffic_groupRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="traffic_groups" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.set_traffic_groupResponse">
</message>

<message name="Networking.Tunnel.get_traffic_groupRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_traffic_groupResponse">
	<part name="return" type="tns:Common.StringSequence"/>
</message>

<message name="Networking.Tunnel.get_static_forwarding_v2Request">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_static_forwarding_v2Response">
	<part name="return" type="tns:Networking.Tunnel.L2TunnelFDBEntryV2SequenceSequence"/>
</message>

<message name="Networking.Tunnel.add_static_forwarding_v2Request">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="entries" type="tns:Networking.Tunnel.L2TunnelFDBEntryV2SequenceSequence"/>
</message>
<message name="Networking.Tunnel.add_static_forwarding_v2Response">
</message>

<message name="Networking.Tunnel.remove_static_forwarding_v2Request">
	<part name="tunnels" type="tns:Common.StringSequence"/>
	<part name="entries" type="tns:Networking.Tunnel.L2TunnelFDBEntryV2SequenceSequence"/>
</message>
<message name="Networking.Tunnel.remove_static_forwarding_v2Response">
</message>

<message name="Networking.Tunnel.get_if_indexRequest">
	<part name="tunnels" type="tns:Common.StringSequence"/>
</message>
<message name="Networking.Tunnel.get_if_indexResponse">
	<part name="return" type="tns:Common.ULongSequence"/>
</message>

<message name="Networking.Tunnel.get_versionRequest">
</message>
<message name="Networking.Tunnel.get_versionResponse">
	<part name="return" type="xsd:string"/>
</message>

<!-- portType -->

<portType name="Networking.TunnelPortType">
	<operation name="get_list">
       	<documentation>
 Gets the names of all tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_listRequest"/>
		<output message="tns:Networking.Tunnel.get_listResponse"/>
	</operation>
	<operation name="create">
	<documentation>
 Creates the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.createRequest"/>
		<output message="tns:Networking.Tunnel.createResponse"/>
	</operation>
	<operation name="delete_tunnel">
	<documentation>
 Deletes the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.delete_tunnelRequest"/>
		<output message="tns:Networking.Tunnel.delete_tunnelResponse"/>
	</operation>
	<operation name="delete_all_tunnels">
	<documentation>
 Deletes all tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.delete_all_tunnelsRequest"/>
		<output message="tns:Networking.Tunnel.delete_all_tunnelsResponse"/>
	</operation>
	<operation name="set_local_address">
	<documentation>
 Sets the IP address for the local end of the tunnel for the specified
 tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_local_addressRequest"/>
		<output message="tns:Networking.Tunnel.set_local_addressResponse"/>
	</operation>
	<operation name="get_local_address">
	<documentation>
 Gets the IP address for the local end for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_local_addressRequest"/>
		<output message="tns:Networking.Tunnel.get_local_addressResponse"/>
	</operation>
	<operation name="set_remote_address">
	<documentation>
 Sets the IP address for the remote end for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_remote_addressRequest"/>
		<output message="tns:Networking.Tunnel.set_remote_addressResponse"/>
	</operation>
	<operation name="get_remote_address">
	<documentation>
 Gets the IP address for the remote end for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_remote_addressRequest"/>
		<output message="tns:Networking.Tunnel.get_remote_addressResponse"/>
	</operation>
	<operation name="set_direction">
	<documentation>
 Sets the direction for traffic flow within the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_directionRequest"/>
		<output message="tns:Networking.Tunnel.set_directionResponse"/>
	</operation>
	<operation name="get_direction">
	<documentation>
 Gets the direction for traffic flow within the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_directionRequest"/>
		<output message="tns:Networking.Tunnel.get_directionResponse"/>
	</operation>
	<operation name="set_profile">
	<documentation>
 *IMPORTANT* As of v12.1.0, once a tunnel is created, the profile of
 the tunnel cannot be changed to a profile of a different type.
 You must delete the tunnel and recreate with a new profile setting if
 you wish to change the profile to one of a different profile type.

 Sets the profile specifying the tunneling protocol for the specified
 tunnels (e.g. IPIP, GRE, WCCP-GRE tunnel profiles).

        	</documentation>
		<input message="tns:Networking.Tunnel.set_profileRequest"/>
		<output message="tns:Networking.Tunnel.set_profileResponse"/>
	</operation>
	<operation name="get_profile">
	<documentation>

 This method has been deprecated. Please use get_profile_v2 instead.
 Gets the profile specifying the tunneling protocol for the specified
 tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_profileRequest"/>
		<output message="tns:Networking.Tunnel.get_profileResponse"/>
	</operation>
	<operation name="get_profile_v2">
	<documentation>
 Gets the lists of profiles and types
 the specified tunnels are associated with.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_profile_v2Request"/>
		<output message="tns:Networking.Tunnel.get_profile_v2Response"/>
	</operation>
	<operation name="set_mtu">
	<documentation>
 Sets the maximum transmission unit (MTU) for the specified tunnels.

 If zero, the tunnel's MTU is automatically set to the MTU of the
 tunnel's underlying interface minus the encapsulation overhead
 introduced by the tunneling protocol in use for the tunnel.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_mtuRequest"/>
		<output message="tns:Networking.Tunnel.set_mtuResponse"/>
	</operation>
	<operation name="get_mtu">
	<documentation>
 Gets the maximum transmission unit (MTU) for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_mtuRequest"/>
		<output message="tns:Networking.Tunnel.get_mtuResponse"/>
	</operation>
	<operation name="set_tos">
	<documentation>
 Sets the Type of Service (ToS) value for the encapsulating packet's
 IP header.  The valid range is zero to 255.  The special value
 65535 specifies that the encapsulating packet's IP header ToS value
 is set to the encapsulated packet's IP header ToS value.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_tosRequest"/>
		<output message="tns:Networking.Tunnel.set_tosResponse"/>
	</operation>
	<operation name="get_tos">
	<documentation>
 Gets the Type of Service (ToS) value for the encapsulating packet's
 IP header.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_tosRequest"/>
		<output message="tns:Networking.Tunnel.get_tosResponse"/>
	</operation>
	<operation name="set_auto_lasthop">
	<documentation>
 Sets the attribute that specifies auto-lasthop behavior,
 for the specified tunnels.
 This controls how the system routes return traffic.
 The default is AUTO_LASTHOP_DEFAULT.
 
        	</documentation>
		<input message="tns:Networking.Tunnel.set_auto_lasthopRequest"/>
		<output message="tns:Networking.Tunnel.set_auto_lasthopResponse"/>
	</operation>
	<operation name="get_auto_lasthop">
	<documentation>
 Gets the attribute that specifies auto-lasthop behavior,
 for the specified tunnels.
 
        	</documentation>
		<input message="tns:Networking.Tunnel.get_auto_lasthopRequest"/>
		<output message="tns:Networking.Tunnel.get_auto_lasthopResponse"/>
	</operation>
	<operation name="set_description">
	<documentation>
 Sets the description for the specified tunnels.

 This is an arbitrary field which can be used for any purpose.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_descriptionRequest"/>
		<output message="tns:Networking.Tunnel.set_descriptionResponse"/>
	</operation>
	<operation name="get_description">
	<documentation>
 Gets the descriptions for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_descriptionRequest"/>
		<output message="tns:Networking.Tunnel.get_descriptionResponse"/>
	</operation>
	<operation name="set_transparent_state">
	<documentation>
 Sets the transparent property for the specified tunnels.

 Enables or disables the tunnel to be transparent. If enabled, the
 user can inspect and/or manipulate the encapsulated traffic flowing
 through the BIG-IP. A transparent tunnel terminates a tunnel while
 presenting the illusion that the tunnel transits the device
 unperturbed i.e. the BIG-IP appears like an intermediate router
 that simply routes IP traffic through the device. The default value
 is disabled.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_transparent_stateRequest"/>
		<output message="tns:Networking.Tunnel.set_transparent_stateResponse"/>
	</operation>
	<operation name="get_transparent_state">
	<documentation>
 Gets the transparent property for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_transparent_stateRequest"/>
		<output message="tns:Networking.Tunnel.get_transparent_stateResponse"/>
	</operation>
	<operation name="set_idle_timeout">
	<documentation>
 Sets the idle timeout for the specified tunnels.

 Specifies an idle timeout for wildcard tunnels (i.e. tunnels with
 remote address 0.0.0.0) in seconds. This setting specifies the 
 number of seconds that a wildcard tunnel connection is idle before 
 the connection is eligible for deletion. If zero, the tunnel's 
 idle timeout is automatically set to the default of 300.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_idle_timeoutRequest"/>
		<output message="tns:Networking.Tunnel.set_idle_timeoutResponse"/>
	</operation>
	<operation name="get_idle_timeout">
	<documentation>
 Gets the idle timeout values for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_idle_timeoutRequest"/>
		<output message="tns:Networking.Tunnel.get_idle_timeoutResponse"/>
	</operation>
	<operation name="create_with_transparent_state">
	<documentation>
 Creates the specified tunnels with transparent states.

 It is for convenience to allow you to avoid using a transaction,
 because you can specify a 0.0.0.0 local address only if 
 transparent is enabled. (Either a transaction or this method are
 good ways of satisfying this validation).

        	</documentation>
		<input message="tns:Networking.Tunnel.create_with_transparent_stateRequest"/>
		<output message="tns:Networking.Tunnel.create_with_transparent_stateResponse"/>
	</operation>
	<operation name="set_local_address_with_transparent_state">
	<documentation>
 Sets the IP address for the local end of the tunnel along with the 
 transparent state of the tunnel for the specified tunnels.
 
 It is for convenience to allow you to avoid using a transaction,
 because you can specify a 0.0.0.0 local address only if 
 transparent is enabled. (Either a transaction or this method are
 good ways of satisfying this validation).

        	</documentation>
		<input message="tns:Networking.Tunnel.set_local_address_with_transparent_stateRequest"/>
		<output message="tns:Networking.Tunnel.set_local_address_with_transparent_stateResponse"/>
	</operation>
	<operation name="set_key">
	<documentation>
 Sets the keys for a set of tunnels.

 A key can be used to signify different values depending
 on the type of tunnel. As an example, it is used as the 
 Virtual Network Identifier (VNI) for VXLAN tunnels.
 The default value is 0.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_keyRequest"/>
		<output message="tns:Networking.Tunnel.set_keyResponse"/>
	</operation>
	<operation name="get_key">
	<documentation>
 Gets the keys for a set of tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_keyRequest"/>
		<output message="tns:Networking.Tunnel.get_keyResponse"/>
	</operation>
	<operation name="get_mac_address">
	<documentation>
 Gets the MAC addresses used by the specified tunnels.

 The MAC address for tunnels cannot be set by the user.
 
        	</documentation>
		<input message="tns:Networking.Tunnel.get_mac_addressRequest"/>
		<output message="tns:Networking.Tunnel.get_mac_addressResponse"/>
	</operation>
	<operation name="create_with_key">
	<documentation>
 Creates a set of tunnels with key values specified.

 It is for convenience to allow you to avoid using a transaction,
 because the existing tunnel create API does not allow key values
 to be specified during tunnel creation. (Either a transaction or 
 this method are good ways of satisfying this validation).

        	</documentation>
		<input message="tns:Networking.Tunnel.create_with_keyRequest"/>
		<output message="tns:Networking.Tunnel.create_with_keyResponse"/>
	</operation>
	<operation name="get_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 get_static_forwarding_v2 instead.
 Gets the static L2 tunnel FDB entries (see struct L2TunnelFDBEntry
 for more details) for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_static_forwardingRequest"/>
		<output message="tns:Networking.Tunnel.get_static_forwardingResponse"/>
	</operation>
	<operation name="add_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 add_static_forwarding_v2 instead.
 Adds the static L2 tunnel FDB entries for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.add_static_forwardingRequest"/>
		<output message="tns:Networking.Tunnel.add_static_forwardingResponse"/>
	</operation>
	<operation name="remove_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 remove_static_forwarding_v2 instead.
 Removes the static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.remove_static_forwardingRequest"/>
		<output message="tns:Networking.Tunnel.remove_static_forwardingResponse"/>
	</operation>
	<operation name="remove_all_static_forwardings">
	<documentation>
 Removes all static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.remove_all_static_forwardingsRequest"/>
		<output message="tns:Networking.Tunnel.remove_all_static_forwardingsResponse"/>
	</operation>
	<operation name="set_secondary_address">
	<documentation>
 Sets the secondary addresses of the tunnels. A secondary address
 is a secondary non-floating IP address when the local-address is
 set to a floating address. Currently this setting is supported
 by NVGRE tunnels only.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_secondary_addressRequest"/>
		<output message="tns:Networking.Tunnel.set_secondary_addressResponse"/>
	</operation>
	<operation name="get_secondary_address">
	<documentation>
 Gets the secondary addresses of the tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_secondary_addressRequest"/>
		<output message="tns:Networking.Tunnel.get_secondary_addressResponse"/>
	</operation>
	<operation name="set_traffic_group">
	<documentation>
 Sets the traffic groups of the tunnels. The traffic group determines
 the ConfigSync behavior of the tunnel object.

        	</documentation>
		<input message="tns:Networking.Tunnel.set_traffic_groupRequest"/>
		<output message="tns:Networking.Tunnel.set_traffic_groupResponse"/>
	</operation>
	<operation name="get_traffic_group">
	<documentation>
 Gets the traffic groups of the tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_traffic_groupRequest"/>
		<output message="tns:Networking.Tunnel.get_traffic_groupResponse"/>
	</operation>
	<operation name="get_static_forwarding_v2">
	<documentation>
 Gets the static L2 tunnel FDB entries (see struct
 L2TunnelFDBEntryV2 for more details) for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_static_forwarding_v2Request"/>
		<output message="tns:Networking.Tunnel.get_static_forwarding_v2Response"/>
	</operation>
	<operation name="add_static_forwarding_v2">
	<documentation>
 Adds the static L2 tunnel FDB entries for the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.add_static_forwarding_v2Request"/>
		<output message="tns:Networking.Tunnel.add_static_forwarding_v2Response"/>
	</operation>
	<operation name="remove_static_forwarding_v2">
	<documentation>
 Removes the static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<input message="tns:Networking.Tunnel.remove_static_forwarding_v2Request"/>
		<output message="tns:Networking.Tunnel.remove_static_forwarding_v2Response"/>
	</operation>
	<operation name="get_if_index">
	<documentation>
 Gets the IF indices for the specified tunnels. This is a
 unique identifier assigned to all objects displayed in
 the SNMP IF-MIB.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_if_indexRequest"/>
		<output message="tns:Networking.Tunnel.get_if_indexResponse"/>
	</operation>
	<operation name="get_version">
	<documentation>
 Gets the version information for this interface.

        	</documentation>
		<input message="tns:Networking.Tunnel.get_versionRequest"/>
		<output message="tns:Networking.Tunnel.get_versionResponse"/>
	</operation>
</portType>

<!-- binding -->

<binding name="Networking.TunnelBinding" type="tns:Networking.TunnelPortType">
	<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
	<operation name="get_list">
	<documentation>
 Gets the names of all tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="create">
	<documentation>
 Creates the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="delete_tunnel">
	<documentation>
 Deletes the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="delete_all_tunnels">
	<documentation>
 Deletes all tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_local_address">
	<documentation>
 Sets the IP address for the local end of the tunnel for the specified
 tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_local_address">
	<documentation>
 Gets the IP address for the local end for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_remote_address">
	<documentation>
 Sets the IP address for the remote end for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_remote_address">
	<documentation>
 Gets the IP address for the remote end for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_direction">
	<documentation>
 Sets the direction for traffic flow within the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_direction">
	<documentation>
 Gets the direction for traffic flow within the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_profile">
	<documentation>
 *IMPORTANT* As of v12.1.0, once a tunnel is created, the profile of
 the tunnel cannot be changed to a profile of a different type.
 You must delete the tunnel and recreate with a new profile setting if
 you wish to change the profile to one of a different profile type.

 Sets the profile specifying the tunneling protocol for the specified
 tunnels (e.g. IPIP, GRE, WCCP-GRE tunnel profiles).

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_profile">
	<documentation>

 This method has been deprecated. Please use get_profile_v2 instead.
 Gets the profile specifying the tunneling protocol for the specified
 tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_profile_v2">
	<documentation>
 Gets the lists of profiles and types
 the specified tunnels are associated with.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_mtu">
	<documentation>
 Sets the maximum transmission unit (MTU) for the specified tunnels.

 If zero, the tunnel's MTU is automatically set to the MTU of the
 tunnel's underlying interface minus the encapsulation overhead
 introduced by the tunneling protocol in use for the tunnel.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_mtu">
	<documentation>
 Gets the maximum transmission unit (MTU) for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_tos">
	<documentation>
 Sets the Type of Service (ToS) value for the encapsulating packet's
 IP header.  The valid range is zero to 255.  The special value
 65535 specifies that the encapsulating packet's IP header ToS value
 is set to the encapsulated packet's IP header ToS value.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_tos">
	<documentation>
 Gets the Type of Service (ToS) value for the encapsulating packet's
 IP header.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_auto_lasthop">
	<documentation>
 Sets the attribute that specifies auto-lasthop behavior,
 for the specified tunnels.
 This controls how the system routes return traffic.
 The default is AUTO_LASTHOP_DEFAULT.
 
        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_auto_lasthop">
	<documentation>
 Gets the attribute that specifies auto-lasthop behavior,
 for the specified tunnels.
 
        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_description">
	<documentation>
 Sets the description for the specified tunnels.

 This is an arbitrary field which can be used for any purpose.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_description">
	<documentation>
 Gets the descriptions for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_transparent_state">
	<documentation>
 Sets the transparent property for the specified tunnels.

 Enables or disables the tunnel to be transparent. If enabled, the
 user can inspect and/or manipulate the encapsulated traffic flowing
 through the BIG-IP. A transparent tunnel terminates a tunnel while
 presenting the illusion that the tunnel transits the device
 unperturbed i.e. the BIG-IP appears like an intermediate router
 that simply routes IP traffic through the device. The default value
 is disabled.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_transparent_state">
	<documentation>
 Gets the transparent property for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_idle_timeout">
	<documentation>
 Sets the idle timeout for the specified tunnels.

 Specifies an idle timeout for wildcard tunnels (i.e. tunnels with
 remote address 0.0.0.0) in seconds. This setting specifies the 
 number of seconds that a wildcard tunnel connection is idle before 
 the connection is eligible for deletion. If zero, the tunnel's 
 idle timeout is automatically set to the default of 300.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_idle_timeout">
	<documentation>
 Gets the idle timeout values for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="create_with_transparent_state">
	<documentation>
 Creates the specified tunnels with transparent states.

 It is for convenience to allow you to avoid using a transaction,
 because you can specify a 0.0.0.0 local address only if 
 transparent is enabled. (Either a transaction or this method are
 good ways of satisfying this validation).

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_local_address_with_transparent_state">
	<documentation>
 Sets the IP address for the local end of the tunnel along with the 
 transparent state of the tunnel for the specified tunnels.
 
 It is for convenience to allow you to avoid using a transaction,
 because you can specify a 0.0.0.0 local address only if 
 transparent is enabled. (Either a transaction or this method are
 good ways of satisfying this validation).

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_key">
	<documentation>
 Sets the keys for a set of tunnels.

 A key can be used to signify different values depending
 on the type of tunnel. As an example, it is used as the 
 Virtual Network Identifier (VNI) for VXLAN tunnels.
 The default value is 0.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_key">
	<documentation>
 Gets the keys for a set of tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_mac_address">
	<documentation>
 Gets the MAC addresses used by the specified tunnels.

 The MAC address for tunnels cannot be set by the user.
 
        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="create_with_key">
	<documentation>
 Creates a set of tunnels with key values specified.

 It is for convenience to allow you to avoid using a transaction,
 because the existing tunnel create API does not allow key values
 to be specified during tunnel creation. (Either a transaction or 
 this method are good ways of satisfying this validation).

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 get_static_forwarding_v2 instead.
 Gets the static L2 tunnel FDB entries (see struct L2TunnelFDBEntry
 for more details) for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="add_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 add_static_forwarding_v2 instead.
 Adds the static L2 tunnel FDB entries for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="remove_static_forwarding">
	<documentation>
 This method has been deprecated. Please use
 remove_static_forwarding_v2 instead.
 Removes the static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="remove_all_static_forwardings">
	<documentation>
 Removes all static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_secondary_address">
	<documentation>
 Sets the secondary addresses of the tunnels. A secondary address
 is a secondary non-floating IP address when the local-address is
 set to a floating address. Currently this setting is supported
 by NVGRE tunnels only.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_secondary_address">
	<documentation>
 Gets the secondary addresses of the tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="set_traffic_group">
	<documentation>
 Sets the traffic groups of the tunnels. The traffic group determines
 the ConfigSync behavior of the tunnel object.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_traffic_group">
	<documentation>
 Gets the traffic groups of the tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_static_forwarding_v2">
	<documentation>
 Gets the static L2 tunnel FDB entries (see struct
 L2TunnelFDBEntryV2 for more details) for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="add_static_forwarding_v2">
	<documentation>
 Adds the static L2 tunnel FDB entries for the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="remove_static_forwarding_v2">
	<documentation>
 Removes the static L2 tunnel FDB entries from the specified tunnels.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_if_index">
	<documentation>
 Gets the IF indices for the specified tunnels. This is a
 unique identifier assigned to all objects displayed in
 the SNMP IF-MIB.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>

	<operation name="get_version">
	<documentation>
 Gets the version information for this interface.

        	</documentation>
		<soap:operation soapAction="urn:iControl:Networking/Tunnel"/>
		<input>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</input>
		<output>
			<soap:body
				use="encoded"
				namespace="urn:iControl:Networking/Tunnel"
				encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
		</output>
	</operation>
</binding>

<!-- service -->

<service name="Networking.Tunnel">
	<documentation>
 The Tunnel interface manages a virtual network interface that allows a
 network protocol to carry packets of another protocol between two
 endpoints.  Once created, it can be used just like a VLAN in BIG-IP
 configurations.

        	</documentation>
	<port name="Networking.TunnelPort" binding="tns:Networking.TunnelBinding">
		<soap:address location="https://url_to_service"/>
	</port>
</service>
</definitions>