// Copyright 2010 the V8 project authors. All rights reserved. // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are // met: // // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // * Redistributions in binary form must reproduce the above // copyright notice, this list of conditions and the following // disclaimer in the documentation and/or other materials provided // with the distribution. // * Neither the name of Google Inc. nor the names of its // contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #include "v8.h" #if defined(V8_TARGET_ARCH_IA32) #include "codegen-inl.h" #include "debug.h" namespace v8 { namespace internal { #ifdef ENABLE_DEBUGGER_SUPPORT bool BreakLocationIterator::IsDebugBreakAtReturn() { return Debug::IsDebugBreakAtReturn(rinfo()); } // Patch the JS frame exit code with a debug break call. See // CodeGenerator::VisitReturnStatement and VirtualFrame::Exit in codegen-ia32.cc // for the precise return instructions sequence. void BreakLocationIterator::SetDebugBreakAtReturn() { ASSERT(Assembler::kJSReturnSequenceLength >= Assembler::kCallInstructionLength); Isolate* isolate = Isolate::Current(); rinfo()->PatchCodeWithCall(isolate->debug()->debug_break_return()->entry(), Assembler::kJSReturnSequenceLength - Assembler::kCallInstructionLength); } // Restore the JS frame exit code. void BreakLocationIterator::ClearDebugBreakAtReturn() { rinfo()->PatchCode(original_rinfo()->pc(), Assembler::kJSReturnSequenceLength); } // A debug break in the frame exit code is identified by the JS frame exit code // having been patched with a call instruction. bool Debug::IsDebugBreakAtReturn(RelocInfo* rinfo) { ASSERT(RelocInfo::IsJSReturn(rinfo->rmode())); return rinfo->IsPatchedReturnSequence(); } bool BreakLocationIterator::IsDebugBreakAtSlot() { ASSERT(IsDebugBreakSlot()); // Check whether the debug break slot instructions have been patched. return rinfo()->IsPatchedDebugBreakSlotSequence(); } void BreakLocationIterator::SetDebugBreakAtSlot() { ASSERT(IsDebugBreakSlot()); Isolate* isolate = Isolate::Current(); rinfo()->PatchCodeWithCall( isolate->debug()->debug_break_slot()->entry(), Assembler::kDebugBreakSlotLength - Assembler::kCallInstructionLength); } void BreakLocationIterator::ClearDebugBreakAtSlot() { ASSERT(IsDebugBreakSlot()); rinfo()->PatchCode(original_rinfo()->pc(), Assembler::kDebugBreakSlotLength); } #define __ ACCESS_MASM(masm) static void Generate_DebugBreakCallHelper(MacroAssembler* masm, RegList object_regs, RegList non_object_regs, bool convert_call_to_jmp) { // Enter an internal frame. __ EnterInternalFrame(); // Store the registers containing live values on the expression stack to // make sure that these are correctly updated during GC. Non object values // are stored as a smi causing it to be untouched by GC. ASSERT((object_regs & ~kJSCallerSaved) == 0); ASSERT((non_object_regs & ~kJSCallerSaved) == 0); ASSERT((object_regs & non_object_regs) == 0); for (int i = 0; i < kNumJSCallerSaved; i++) { int r = JSCallerSavedCode(i); Register reg = { r }; if ((object_regs & (1 << r)) != 0) { __ push(reg); } if ((non_object_regs & (1 << r)) != 0) { if (FLAG_debug_code) { __ test(reg, Immediate(0xc0000000)); __ Assert(zero, "Unable to encode value as smi"); } __ SmiTag(reg); __ push(reg); } } #ifdef DEBUG __ RecordComment("// Calling from debug break to runtime - come in - over"); #endif __ Set(eax, Immediate(0)); // No arguments. __ mov(ebx, Immediate(ExternalReference::debug_break(masm->isolate()))); CEntryStub ceb(1); __ CallStub(&ceb); // Restore the register values containing object pointers from the expression // stack. for (int i = kNumJSCallerSaved; --i >= 0;) { int r = JSCallerSavedCode(i); Register reg = { r }; if (FLAG_debug_code) { __ Set(reg, Immediate(kDebugZapValue)); } if ((object_regs & (1 << r)) != 0) { __ pop(reg); } if ((non_object_regs & (1 << r)) != 0) { __ pop(reg); __ SmiUntag(reg); } } // Get rid of the internal frame. __ LeaveInternalFrame(); // If this call did not replace a call but patched other code then there will // be an unwanted return address left on the stack. Here we get rid of that. if (convert_call_to_jmp) { __ add(Operand(esp), Immediate(kPointerSize)); } // Now that the break point has been handled, resume normal execution by // jumping to the target address intended by the caller and that was // overwritten by the address of DebugBreakXXX. ExternalReference after_break_target = ExternalReference(Debug_Address::AfterBreakTarget(), masm->isolate()); __ jmp(Operand::StaticVariable(after_break_target)); } void Debug::GenerateLoadICDebugBreak(MacroAssembler* masm) { // Register state for IC load call (from ic-ia32.cc). // ----------- S t a t e ------------- // -- eax : receiver // -- ecx : name // ----------------------------------- Generate_DebugBreakCallHelper(masm, eax.bit() | ecx.bit(), 0, false); } void Debug::GenerateStoreICDebugBreak(MacroAssembler* masm) { // Register state for IC store call (from ic-ia32.cc). // ----------- S t a t e ------------- // -- eax : value // -- ecx : name // -- edx : receiver // ----------------------------------- Generate_DebugBreakCallHelper( masm, eax.bit() | ecx.bit() | edx.bit(), 0, false); } void Debug::GenerateKeyedLoadICDebugBreak(MacroAssembler* masm) { // Register state for keyed IC load call (from ic-ia32.cc). // ----------- S t a t e ------------- // -- edx : receiver // -- eax : key // ----------------------------------- Generate_DebugBreakCallHelper(masm, eax.bit() | edx.bit(), 0, false); } void Debug::GenerateKeyedStoreICDebugBreak(MacroAssembler* masm) { // Register state for keyed IC load call (from ic-ia32.cc). // ----------- S t a t e ------------- // -- eax : value // -- ecx : key // -- edx : receiver // ----------------------------------- Generate_DebugBreakCallHelper( masm, eax.bit() | ecx.bit() | edx.bit(), 0, false); } void Debug::GenerateCallICDebugBreak(MacroAssembler* masm) { // Register state for keyed IC call call (from ic-ia32.cc) // ----------- S t a t e ------------- // -- ecx: name // ----------------------------------- Generate_DebugBreakCallHelper(masm, ecx.bit(), 0, false); } void Debug::GenerateConstructCallDebugBreak(MacroAssembler* masm) { // Register state just before return from JS function (from codegen-ia32.cc). // eax is the actual number of arguments not encoded as a smi see comment // above IC call. // ----------- S t a t e ------------- // -- eax: number of arguments (not smi) // -- edi: constructor function // ----------------------------------- // The number of arguments in eax is not smi encoded. Generate_DebugBreakCallHelper(masm, edi.bit(), eax.bit(), false); } void Debug::GenerateReturnDebugBreak(MacroAssembler* masm) { // Register state just before return from JS function (from codegen-ia32.cc). // ----------- S t a t e ------------- // -- eax: return value // ----------------------------------- Generate_DebugBreakCallHelper(masm, eax.bit(), 0, true); } void Debug::GenerateStubNoRegistersDebugBreak(MacroAssembler* masm) { // Register state for stub CallFunction (from CallFunctionStub in ic-ia32.cc). // ----------- S t a t e ------------- // No registers used on entry. // ----------------------------------- Generate_DebugBreakCallHelper(masm, 0, 0, false); } void Debug::GenerateSlot(MacroAssembler* masm) { // Generate enough nop's to make space for a call instruction. Label check_codesize; __ bind(&check_codesize); __ RecordDebugBreakSlot(); for (int i = 0; i < Assembler::kDebugBreakSlotLength; i++) { __ nop(); } ASSERT_EQ(Assembler::kDebugBreakSlotLength, masm->SizeOfCodeGeneratedSince(&check_codesize)); } void Debug::GenerateSlotDebugBreak(MacroAssembler* masm) { // In the places where a debug break slot is inserted no registers can contain // object pointers. Generate_DebugBreakCallHelper(masm, 0, 0, true); } void Debug::GeneratePlainReturnLiveEdit(MacroAssembler* masm) { masm->ret(0); } void Debug::GenerateFrameDropperLiveEdit(MacroAssembler* masm) { ExternalReference restarter_frame_function_slot = ExternalReference(Debug_Address::RestarterFrameFunctionPointer(), masm->isolate()); __ mov(Operand::StaticVariable(restarter_frame_function_slot), Immediate(0)); // We do not know our frame height, but set esp based on ebp. __ lea(esp, Operand(ebp, -1 * kPointerSize)); __ pop(edi); // Function. __ pop(ebp); // Load context from the function. __ mov(esi, FieldOperand(edi, JSFunction::kContextOffset)); // Get function code. __ mov(edx, FieldOperand(edi, JSFunction::kSharedFunctionInfoOffset)); __ mov(edx, FieldOperand(edx, SharedFunctionInfo::kCodeOffset)); __ lea(edx, FieldOperand(edx, Code::kHeaderSize)); // Re-run JSFunction, edi is function, esi is context. __ jmp(Operand(edx)); } const bool Debug::kFrameDropperSupported = true; #undef __ #endif // ENABLE_DEBUGGER_SUPPORT } } // namespace v8::internal #endif // V8_TARGET_ARCH_IA32