# frozen_string_literal: true
require "thread"
require "concurrent/map"
require "monitor"
require "weakref"
module ActiveRecord
module ConnectionAdapters
module AbstractPool # :nodoc:
def get_schema_cache(connection)
self.schema_cache ||= SchemaCache.new(connection)
schema_cache.connection = connection
schema_cache
end
def set_schema_cache(cache)
self.schema_cache = cache
end
end
class NullPool # :nodoc:
include ConnectionAdapters::AbstractPool
attr_accessor :schema_cache
def connection_klass
nil
end
end
# Connection pool base class for managing Active Record database
# connections.
#
# == Introduction
#
# A connection pool synchronizes thread access to a limited number of
# database connections. The basic idea is that each thread checks out a
# database connection from the pool, uses that connection, and checks the
# connection back in. ConnectionPool is completely thread-safe, and will
# ensure that a connection cannot be used by two threads at the same time,
# as long as ConnectionPool's contract is correctly followed. It will also
# handle cases in which there are more threads than connections: if all
# connections have been checked out, and a thread tries to checkout a
# connection anyway, then ConnectionPool will wait until some other thread
# has checked in a connection.
#
# == Obtaining (checking out) a connection
#
# Connections can be obtained and used from a connection pool in several
# ways:
#
# 1. Simply use {ActiveRecord::Base.connection}[rdoc-ref:ConnectionHandling.connection]
# as with Active Record 2.1 and
# earlier (pre-connection-pooling). Eventually, when you're done with
# the connection(s) and wish it to be returned to the pool, you call
# {ActiveRecord::Base.clear_active_connections!}[rdoc-ref:ConnectionAdapters::ConnectionHandler#clear_active_connections!].
# This will be the default behavior for Active Record when used in conjunction with
# Action Pack's request handling cycle.
# 2. Manually check out a connection from the pool with
# {ActiveRecord::Base.connection_pool.checkout}[rdoc-ref:#checkout]. You are responsible for
# returning this connection to the pool when finished by calling
# {ActiveRecord::Base.connection_pool.checkin(connection)}[rdoc-ref:#checkin].
# 3. Use {ActiveRecord::Base.connection_pool.with_connection(&block)}[rdoc-ref:#with_connection], which
# obtains a connection, yields it as the sole argument to the block,
# and returns it to the pool after the block completes.
#
# Connections in the pool are actually AbstractAdapter objects (or objects
# compatible with AbstractAdapter's interface).
#
# == Options
#
# There are several connection-pooling-related options that you can add to
# your database connection configuration:
#
# * +pool+: maximum number of connections the pool may manage (default 5).
# * +idle_timeout+: number of seconds that a connection will be kept
# unused in the pool before it is automatically disconnected (default
# 300 seconds). Set this to zero to keep connections forever.
# * +checkout_timeout+: number of seconds to wait for a connection to
# become available before giving up and raising a timeout error (default
# 5 seconds).
#
#--
# Synchronization policy:
# * all public methods can be called outside +synchronize+
# * access to these instance variables needs to be in +synchronize+:
# * @connections
# * @now_connecting
# * private methods that require being called in a +synchronize+ blocks
# are now explicitly documented
class ConnectionPool
# Threadsafe, fair, LIFO queue. Meant to be used by ConnectionPool
# with which it shares a Monitor.
class Queue
def initialize(lock = Monitor.new)
@lock = lock
@cond = @lock.new_cond
@num_waiting = 0
@queue = []
end
# Test if any threads are currently waiting on the queue.
def any_waiting?
synchronize do
@num_waiting > 0
end
end
# Returns the number of threads currently waiting on this
# queue.
def num_waiting
synchronize do
@num_waiting
end
end
# Add +element+ to the queue. Never blocks.
def add(element)
synchronize do
@queue.push element
@cond.signal
end
end
# If +element+ is in the queue, remove and return it, or +nil+.
def delete(element)
synchronize do
@queue.delete(element)
end
end
# Remove all elements from the queue.
def clear
synchronize do
@queue.clear
end
end
# Remove the head of the queue.
#
# If +timeout+ is not given, remove and return the head of the
# queue if the number of available elements is strictly
# greater than the number of threads currently waiting (that
# is, don't jump ahead in line). Otherwise, return +nil+.
#
# If +timeout+ is given, block if there is no element
# available, waiting up to +timeout+ seconds for an element to
# become available.
#
# Raises:
# - ActiveRecord::ConnectionTimeoutError if +timeout+ is given and no element
# becomes available within +timeout+ seconds,
def poll(timeout = nil)
synchronize { internal_poll(timeout) }
end
private
def internal_poll(timeout)
no_wait_poll || (timeout && wait_poll(timeout))
end
def synchronize(&block)
@lock.synchronize(&block)
end
# Test if the queue currently contains any elements.
def any?
!@queue.empty?
end
# A thread can remove an element from the queue without
# waiting if and only if the number of currently available
# connections is strictly greater than the number of waiting
# threads.
def can_remove_no_wait?
@queue.size > @num_waiting
end
# Removes and returns the head of the queue if possible, or +nil+.
def remove
@queue.pop
end
# Remove and return the head of the queue if the number of
# available elements is strictly greater than the number of
# threads currently waiting. Otherwise, return +nil+.
def no_wait_poll
remove if can_remove_no_wait?
end
# Waits on the queue up to +timeout+ seconds, then removes and
# returns the head of the queue.
def wait_poll(timeout)
@num_waiting += 1
t0 = Concurrent.monotonic_time
elapsed = 0
loop do
ActiveSupport::Dependencies.interlock.permit_concurrent_loads do
@cond.wait(timeout - elapsed)
end
return remove if any?
elapsed = Concurrent.monotonic_time - t0
if elapsed >= timeout
msg = "could not obtain a connection from the pool within %0.3f seconds (waited %0.3f seconds); all pooled connections were in use" %
[timeout, elapsed]
raise ConnectionTimeoutError, msg
end
end
ensure
@num_waiting -= 1
end
end
# Adds the ability to turn a basic fair FIFO queue into one
# biased to some thread.
module BiasableQueue # :nodoc:
class BiasedConditionVariable # :nodoc:
# semantics of condition variables guarantee that +broadcast+, +broadcast_on_biased+,
# +signal+ and +wait+ methods are only called while holding a lock
def initialize(lock, other_cond, preferred_thread)
@real_cond = lock.new_cond
@other_cond = other_cond
@preferred_thread = preferred_thread
@num_waiting_on_real_cond = 0
end
def broadcast
broadcast_on_biased
@other_cond.broadcast
end
def broadcast_on_biased
@num_waiting_on_real_cond = 0
@real_cond.broadcast
end
def signal
if @num_waiting_on_real_cond > 0
@num_waiting_on_real_cond -= 1
@real_cond
else
@other_cond
end.signal
end
def wait(timeout)
if Thread.current == @preferred_thread
@num_waiting_on_real_cond += 1
@real_cond
else
@other_cond
end.wait(timeout)
end
end
def with_a_bias_for(thread)
previous_cond = nil
new_cond = nil
synchronize do
previous_cond = @cond
@cond = new_cond = BiasedConditionVariable.new(@lock, @cond, thread)
end
yield
ensure
synchronize do
@cond = previous_cond if previous_cond
new_cond.broadcast_on_biased if new_cond # wake up any remaining sleepers
end
end
end
# Connections must be leased while holding the main pool mutex. This is
# an internal subclass that also +.leases+ returned connections while
# still in queue's critical section (queue synchronizes with the same
# @lock as the main pool) so that a returned connection is already
# leased and there is no need to re-enter synchronized block.
class ConnectionLeasingQueue < Queue # :nodoc:
include BiasableQueue
private
def internal_poll(timeout)
conn = super
conn.lease if conn
conn
end
end
# Every +frequency+ seconds, the reaper will call +reap+ and +flush+ on
# +pool+. A reaper instantiated with a zero frequency will never reap
# the connection pool.
#
# Configure the frequency by setting +reaping_frequency+ in your database
# yaml file (default 60 seconds).
class Reaper
attr_reader :pool, :frequency
def initialize(pool, frequency)
@pool = pool
@frequency = frequency
end
@mutex = Mutex.new
@pools = {}
@threads = {}
class << self
def register_pool(pool, frequency) # :nodoc:
@mutex.synchronize do
unless @threads[frequency]&.alive?
@threads[frequency] = spawn_thread(frequency)
end
@pools[frequency] ||= []
@pools[frequency] << WeakRef.new(pool)
end
end
private
def spawn_thread(frequency)
Thread.new(frequency) do |t|
# Advise multi-threaded app servers to ignore this thread for
# the purposes of fork safety warnings
Thread.current.thread_variable_set(:fork_safe, true)
running = true
while running
sleep t
@mutex.synchronize do
@pools[frequency].select! do |pool|
pool.weakref_alive? && !pool.discarded?
end
@pools[frequency].each do |p|
p.reap
p.flush
rescue WeakRef::RefError
end
if @pools[frequency].empty?
@pools.delete(frequency)
@threads.delete(frequency)
running = false
end
end
end
end
end
end
def run
return unless frequency && frequency > 0
self.class.register_pool(pool, frequency)
end
end
include MonitorMixin
include QueryCache::ConnectionPoolConfiguration
include ConnectionAdapters::AbstractPool
attr_accessor :automatic_reconnect, :checkout_timeout
attr_reader :db_config, :size, :reaper, :pool_config, :connection_klass
delegate :schema_cache, :schema_cache=, to: :pool_config
# Creates a new ConnectionPool object. +pool_config+ is a PoolConfig
# object which describes database connection information (e.g. adapter,
# host name, username, password, etc), as well as the maximum size for
# this ConnectionPool.
#
# The default ConnectionPool maximum size is 5.
def initialize(pool_config)
super()
@pool_config = pool_config
@db_config = pool_config.db_config
@connection_klass = pool_config.connection_klass
@checkout_timeout = db_config.checkout_timeout
@idle_timeout = db_config.idle_timeout
@size = db_config.pool
# This variable tracks the cache of threads mapped to reserved connections, with the
# sole purpose of speeding up the +connection+ method. It is not the authoritative
# registry of which thread owns which connection. Connection ownership is tracked by
# the +connection.owner+ attr on each +connection+ instance.
# The invariant works like this: if there is mapping of thread => conn,
# then that +thread+ does indeed own that +conn+. However, an absence of such
# mapping does not mean that the +thread+ doesn't own the said connection. In
# that case +conn.owner+ attr should be consulted.
# Access and modification of @thread_cached_conns does not require
# synchronization.
@thread_cached_conns = Concurrent::Map.new(initial_capacity: @size)
@connections = []
@automatic_reconnect = true
# Connection pool allows for concurrent (outside the main +synchronize+ section)
# establishment of new connections. This variable tracks the number of threads
# currently in the process of independently establishing connections to the DB.
@now_connecting = 0
@threads_blocking_new_connections = 0
@available = ConnectionLeasingQueue.new self
@lock_thread = false
@reaper = Reaper.new(self, db_config.reaping_frequency)
@reaper.run
end
def lock_thread=(lock_thread)
if lock_thread
@lock_thread = Thread.current
else
@lock_thread = nil
end
end
# Retrieve the connection associated with the current thread, or call
# #checkout to obtain one if necessary.
#
# #connection can be called any number of times; the connection is
# held in a cache keyed by a thread.
def connection
@thread_cached_conns[connection_cache_key(current_thread)] ||= checkout
end
# Returns true if there is an open connection being used for the current thread.
#
# This method only works for connections that have been obtained through
# #connection or #with_connection methods. Connections obtained through
# #checkout will not be detected by #active_connection?
def active_connection?
@thread_cached_conns[connection_cache_key(current_thread)]
end
# Signal that the thread is finished with the current connection.
# #release_connection releases the connection-thread association
# and returns the connection to the pool.
#
# This method only works for connections that have been obtained through
# #connection or #with_connection methods, connections obtained through
# #checkout will not be automatically released.
def release_connection(owner_thread = Thread.current)
if conn = @thread_cached_conns.delete(connection_cache_key(owner_thread))
checkin conn
end
end
# If a connection obtained through #connection or #with_connection methods
# already exists yield it to the block. If no such connection
# exists checkout a connection, yield it to the block, and checkin the
# connection when finished.
def with_connection
unless conn = @thread_cached_conns[connection_cache_key(Thread.current)]
conn = connection
fresh_connection = true
end
yield conn
ensure
release_connection if fresh_connection
end
# Returns true if a connection has already been opened.
def connected?
synchronize { @connections.any? }
end
# Returns an array containing the connections currently in the pool.
# Access to the array does not require synchronization on the pool because
# the array is newly created and not retained by the pool.
#
# However; this method bypasses the ConnectionPool's thread-safe connection
# access pattern. A returned connection may be owned by another thread,
# unowned, or by happen-stance owned by the calling thread.
#
# Calling methods on a connection without ownership is subject to the
# thread-safety guarantees of the underlying method. Many of the methods
# on connection adapter classes are inherently multi-thread unsafe.
def connections
synchronize { @connections.dup }
end
# Disconnects all connections in the pool, and clears the pool.
#
# Raises:
# - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
# connections in the pool within a timeout interval (default duration is
# spec.db_config.checkout_timeout * 2 seconds).
def disconnect(raise_on_acquisition_timeout = true)
with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
synchronize do
@connections.each do |conn|
if conn.in_use?
conn.steal!
checkin conn
end
conn.disconnect!
end
@connections = []
@available.clear
end
end
end
# Disconnects all connections in the pool, and clears the pool.
#
# The pool first tries to gain ownership of all connections. If unable to
# do so within a timeout interval (default duration is
# spec.db_config.checkout_timeout * 2 seconds), then the pool is forcefully
# disconnected without any regard for other connection owning threads.
def disconnect!
disconnect(false)
end
# Discards all connections in the pool (even if they're currently
# leased!), along with the pool itself. Any further interaction with the
# pool (except #spec and #schema_cache) is undefined.
#
# See AbstractAdapter#discard!
def discard! # :nodoc:
synchronize do
return if self.discarded?
@connections.each do |conn|
conn.discard!
end
@connections = @available = @thread_cached_conns = nil
end
end
def discarded? # :nodoc:
@connections.nil?
end
# Clears the cache which maps classes and re-connects connections that
# require reloading.
#
# Raises:
# - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
# connections in the pool within a timeout interval (default duration is
# spec.db_config.checkout_timeout * 2 seconds).
def clear_reloadable_connections(raise_on_acquisition_timeout = true)
with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
synchronize do
@connections.each do |conn|
if conn.in_use?
conn.steal!
checkin conn
end
conn.disconnect! if conn.requires_reloading?
end
@connections.delete_if(&:requires_reloading?)
@available.clear
end
end
end
# Clears the cache which maps classes and re-connects connections that
# require reloading.
#
# The pool first tries to gain ownership of all connections. If unable to
# do so within a timeout interval (default duration is
# spec.db_config.checkout_timeout * 2 seconds), then the pool forcefully
# clears the cache and reloads connections without any regard for other
# connection owning threads.
def clear_reloadable_connections!
clear_reloadable_connections(false)
end
# Check-out a database connection from the pool, indicating that you want
# to use it. You should call #checkin when you no longer need this.
#
# This is done by either returning and leasing existing connection, or by
# creating a new connection and leasing it.
#
# If all connections are leased and the pool is at capacity (meaning the
# number of currently leased connections is greater than or equal to the
# size limit set), an ActiveRecord::ConnectionTimeoutError exception will be raised.
#
# Returns: an AbstractAdapter object.
#
# Raises:
# - ActiveRecord::ConnectionTimeoutError no connection can be obtained from the pool.
def checkout(checkout_timeout = @checkout_timeout)
checkout_and_verify(acquire_connection(checkout_timeout))
end
# Check-in a database connection back into the pool, indicating that you
# no longer need this connection.
#
# +conn+: an AbstractAdapter object, which was obtained by earlier by
# calling #checkout on this pool.
def checkin(conn)
conn.lock.synchronize do
synchronize do
remove_connection_from_thread_cache conn
conn._run_checkin_callbacks do
conn.expire
end
@available.add conn
end
end
end
# Remove a connection from the connection pool. The connection will
# remain open and active but will no longer be managed by this pool.
def remove(conn)
needs_new_connection = false
synchronize do
remove_connection_from_thread_cache conn
@connections.delete conn
@available.delete conn
# @available.any_waiting? => true means that prior to removing this
# conn, the pool was at its max size (@connections.size == @size).
# This would mean that any threads stuck waiting in the queue wouldn't
# know they could checkout_new_connection, so let's do it for them.
# Because condition-wait loop is encapsulated in the Queue class
# (that in turn is oblivious to ConnectionPool implementation), threads
# that are "stuck" there are helpless. They have no way of creating
# new connections and are completely reliant on us feeding available
# connections into the Queue.
needs_new_connection = @available.any_waiting?
end
# This is intentionally done outside of the synchronized section as we
# would like not to hold the main mutex while checking out new connections.
# Thus there is some chance that needs_new_connection information is now
# stale, we can live with that (bulk_make_new_connections will make
# sure not to exceed the pool's @size limit).
bulk_make_new_connections(1) if needs_new_connection
end
# Recover lost connections for the pool. A lost connection can occur if
# a programmer forgets to checkin a connection at the end of a thread
# or a thread dies unexpectedly.
def reap
stale_connections = synchronize do
return if self.discarded?
@connections.select do |conn|
conn.in_use? && !conn.owner.alive?
end.each do |conn|
conn.steal!
end
end
stale_connections.each do |conn|
if conn.active?
conn.reset!
checkin conn
else
remove conn
end
end
end
# Disconnect all connections that have been idle for at least
# +minimum_idle+ seconds. Connections currently checked out, or that were
# checked in less than +minimum_idle+ seconds ago, are unaffected.
def flush(minimum_idle = @idle_timeout)
return if minimum_idle.nil?
idle_connections = synchronize do
return if self.discarded?
@connections.select do |conn|
!conn.in_use? && conn.seconds_idle >= minimum_idle
end.each do |conn|
conn.lease
@available.delete conn
@connections.delete conn
end
end
idle_connections.each do |conn|
conn.disconnect!
end
end
# Disconnect all currently idle connections. Connections currently checked
# out are unaffected.
def flush!
reap
flush(-1)
end
def num_waiting_in_queue # :nodoc:
@available.num_waiting
end
# Return connection pool's usage statistic
# Example:
#
# ActiveRecord::Base.connection_pool.stat # => { size: 15, connections: 1, busy: 1, dead: 0, idle: 0, waiting: 0, checkout_timeout: 5 }
def stat
synchronize do
{
size: size,
connections: @connections.size,
busy: @connections.count { |c| c.in_use? && c.owner.alive? },
dead: @connections.count { |c| c.in_use? && !c.owner.alive? },
idle: @connections.count { |c| !c.in_use? },
waiting: num_waiting_in_queue,
checkout_timeout: checkout_timeout
}
end
end
private
#--
# this is unfortunately not concurrent
def bulk_make_new_connections(num_new_conns_needed)
num_new_conns_needed.times do
# try_to_checkout_new_connection will not exceed pool's @size limit
if new_conn = try_to_checkout_new_connection
# make the new_conn available to the starving threads stuck @available Queue
checkin(new_conn)
end
end
end
#--
# From the discussion on GitHub:
# https://github.com/rails/rails/pull/14938#commitcomment-6601951
# This hook-in method allows for easier monkey-patching fixes needed by
# JRuby users that use Fibers.
def connection_cache_key(thread)
thread
end
def current_thread
@lock_thread || Thread.current
end
# Take control of all existing connections so a "group" action such as
# reload/disconnect can be performed safely. It is no longer enough to
# wrap it in +synchronize+ because some pool's actions are allowed
# to be performed outside of the main +synchronize+ block.
def with_exclusively_acquired_all_connections(raise_on_acquisition_timeout = true)
with_new_connections_blocked do
attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout)
yield
end
end
def attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout = true)
collected_conns = synchronize do
# account for our own connections
@connections.select { |conn| conn.owner == Thread.current }
end
newly_checked_out = []
timeout_time = Concurrent.monotonic_time + (@checkout_timeout * 2)
@available.with_a_bias_for(Thread.current) do
loop do
synchronize do
return if collected_conns.size == @connections.size && @now_connecting == 0
remaining_timeout = timeout_time - Concurrent.monotonic_time
remaining_timeout = 0 if remaining_timeout < 0
conn = checkout_for_exclusive_access(remaining_timeout)
collected_conns << conn
newly_checked_out << conn
end
end
end
rescue ExclusiveConnectionTimeoutError
# raise_on_acquisition_timeout == false means we are directed to ignore any
# timeouts and are expected to just give up: we've obtained as many connections
# as possible, note that in a case like that we don't return any of the
# +newly_checked_out+ connections.
if raise_on_acquisition_timeout
release_newly_checked_out = true
raise
end
rescue Exception # if something else went wrong
# this can't be a "naked" rescue, because we have should return conns
# even for non-StandardErrors
release_newly_checked_out = true
raise
ensure
if release_newly_checked_out && newly_checked_out
# releasing only those conns that were checked out in this method, conns
# checked outside this method (before it was called) are not for us to release
newly_checked_out.each { |conn| checkin(conn) }
end
end
#--
# Must be called in a synchronize block.
def checkout_for_exclusive_access(checkout_timeout)
checkout(checkout_timeout)
rescue ConnectionTimeoutError
# this block can't be easily moved into attempt_to_checkout_all_existing_connections's
# rescue block, because doing so would put it outside of synchronize section, without
# being in a critical section thread_report might become inaccurate
msg = +"could not obtain ownership of all database connections in #{checkout_timeout} seconds"
thread_report = []
@connections.each do |conn|
unless conn.owner == Thread.current
thread_report << "#{conn} is owned by #{conn.owner}"
end
end
msg << " (#{thread_report.join(', ')})" if thread_report.any?
raise ExclusiveConnectionTimeoutError, msg
end
def with_new_connections_blocked
synchronize do
@threads_blocking_new_connections += 1
end
yield
ensure
num_new_conns_required = 0
synchronize do
@threads_blocking_new_connections -= 1
if @threads_blocking_new_connections.zero?
@available.clear
num_new_conns_required = num_waiting_in_queue
@connections.each do |conn|
next if conn.in_use?
@available.add conn
num_new_conns_required -= 1
end
end
end
bulk_make_new_connections(num_new_conns_required) if num_new_conns_required > 0
end
# Acquire a connection by one of 1) immediately removing one
# from the queue of available connections, 2) creating a new
# connection if the pool is not at capacity, 3) waiting on the
# queue for a connection to become available.
#
# Raises:
# - ActiveRecord::ConnectionTimeoutError if a connection could not be acquired
#
#--
# Implementation detail: the connection returned by +acquire_connection+
# will already be "+connection.lease+ -ed" to the current thread.
def acquire_connection(checkout_timeout)
# NOTE: we rely on @available.poll and +try_to_checkout_new_connection+ to
# +conn.lease+ the returned connection (and to do this in a +synchronized+
# section). This is not the cleanest implementation, as ideally we would
# synchronize { conn.lease } in this method, but by leaving it to @available.poll
# and +try_to_checkout_new_connection+ we can piggyback on +synchronize+ sections
# of the said methods and avoid an additional +synchronize+ overhead.
if conn = @available.poll || try_to_checkout_new_connection
conn
else
reap
@available.poll(checkout_timeout)
end
end
#--
# if owner_thread param is omitted, this must be called in synchronize block
def remove_connection_from_thread_cache(conn, owner_thread = conn.owner)
@thread_cached_conns.delete_pair(connection_cache_key(owner_thread), conn)
end
alias_method :release, :remove_connection_from_thread_cache
def new_connection
Base.public_send(db_config.adapter_method, db_config.configuration_hash).tap do |conn|
conn.check_version
end
end
# If the pool is not at a @size limit, establish new connection. Connecting
# to the DB is done outside main synchronized section.
#--
# Implementation constraint: a newly established connection returned by this
# method must be in the +.leased+ state.
def try_to_checkout_new_connection
# first in synchronized section check if establishing new conns is allowed
# and increment @now_connecting, to prevent overstepping this pool's @size
# constraint
do_checkout = synchronize do
if @threads_blocking_new_connections.zero? && (@connections.size + @now_connecting) < @size
@now_connecting += 1
end
end
if do_checkout
begin
# if successfully incremented @now_connecting establish new connection
# outside of synchronized section
conn = checkout_new_connection
ensure
synchronize do
if conn
adopt_connection(conn)
# returned conn needs to be already leased
conn.lease
end
@now_connecting -= 1
end
end
end
end
def adopt_connection(conn)
conn.pool = self
@connections << conn
end
def checkout_new_connection
raise ConnectionNotEstablished unless @automatic_reconnect
new_connection
end
def checkout_and_verify(c)
c._run_checkout_callbacks do
c.verify!
end
c
rescue
remove c
c.disconnect!
raise
end
end
# ConnectionHandler is a collection of ConnectionPool objects. It is used
# for keeping separate connection pools that connect to different databases.
#
# For example, suppose that you have 5 models, with the following hierarchy:
#
# class Author < ActiveRecord::Base
# end
#
# class BankAccount < ActiveRecord::Base
# end
#
# class Book < ActiveRecord::Base
# establish_connection :library_db
# end
#
# class ScaryBook < Book
# end
#
# class GoodBook < Book
# end
#
# And a database.yml that looked like this:
#
# development:
# database: my_application
# host: localhost
#
# library_db:
# database: library
# host: some.library.org
#
# Your primary database in the development environment is "my_application"
# but the Book model connects to a separate database called "library_db"
# (this can even be a database on a different machine).
#
# Book, ScaryBook and GoodBook will all use the same connection pool to
# "library_db" while Author, BankAccount, and any other models you create
# will use the default connection pool to "my_application".
#
# The various connection pools are managed by a single instance of
# ConnectionHandler accessible via ActiveRecord::Base.connection_handler.
# All Active Record models use this handler to determine the connection pool that they
# should use.
#
# The ConnectionHandler class is not coupled with the Active models, as it has no knowledge
# about the model. The model needs to pass a connection specification name to the handler,
# in order to look up the correct connection pool.
class ConnectionHandler
FINALIZER = lambda { |_| ActiveSupport::ForkTracker.check! }
private_constant :FINALIZER
def initialize
# These caches are keyed by pool_config.connection_specification_name (PoolConfig#connection_specification_name).
@owner_to_pool_manager = Concurrent::Map.new(initial_capacity: 2)
# Backup finalizer: if the forked child skipped Kernel#fork the early discard has not occurred
ObjectSpace.define_finalizer self, FINALIZER
end
def prevent_writes # :nodoc:
Thread.current[:prevent_writes]
end
def prevent_writes=(prevent_writes) # :nodoc:
Thread.current[:prevent_writes] = prevent_writes
end
# Prevent writing to the database regardless of role.
#
# In some cases you may want to prevent writes to the database
# even if you are on a database that can write. `while_preventing_writes`
# will prevent writes to the database for the duration of the block.
#
# This method does not provide the same protection as a readonly
# user and is meant to be a safeguard against accidental writes.
#
# See `READ_QUERY` for the queries that are blocked by this
# method.
def while_preventing_writes(enabled = true)
unless ActiveRecord::Base.legacy_connection_handling
raise NotImplementedError, "`while_preventing_writes` is only available on the connection_handler with legacy_connection_handling"
end
original, self.prevent_writes = self.prevent_writes, enabled
yield
ensure
self.prevent_writes = original
end
def connection_pool_names # :nodoc:
owner_to_pool_manager.keys
end
def all_connection_pools
owner_to_pool_manager.values.flat_map { |m| m.pool_configs.map(&:pool) }
end
def connection_pool_list(role = ActiveRecord::Base.current_role)
owner_to_pool_manager.values.flat_map { |m| m.pool_configs(role).map(&:pool) }
end
alias :connection_pools :connection_pool_list
def establish_connection(config, owner_name: Base, role: ActiveRecord::Base.current_role, shard: Base.current_shard)
owner_name = config.to_s if config.is_a?(Symbol)
pool_config = resolve_pool_config(config, owner_name)
db_config = pool_config.db_config
# Protects the connection named `ActiveRecord::Base` from being removed
# if the user calls `establish_connection :primary`.
if owner_to_pool_manager.key?(pool_config.connection_specification_name)
remove_connection_pool(pool_config.connection_specification_name, role: role, shard: shard)
end
message_bus = ActiveSupport::Notifications.instrumenter
payload = {}
if pool_config
payload[:spec_name] = pool_config.connection_specification_name
payload[:shard] = shard
payload[:config] = db_config.configuration_hash
end
if ActiveRecord::Base.legacy_connection_handling
owner_to_pool_manager[pool_config.connection_specification_name] ||= LegacyPoolManager.new
else
owner_to_pool_manager[pool_config.connection_specification_name] ||= PoolManager.new
end
pool_manager = get_pool_manager(pool_config.connection_specification_name)
pool_manager.set_pool_config(role, shard, pool_config)
message_bus.instrument("!connection.active_record", payload) do
pool_config.pool
end
end
# Returns true if there are any active connections among the connection
# pools that the ConnectionHandler is managing.
def active_connections?(role = ActiveRecord::Base.current_role)
connection_pool_list(role).any?(&:active_connection?)
end
# Returns any connections in use by the current thread back to the pool,
# and also returns connections to the pool cached by threads that are no
# longer alive.
def clear_active_connections!(role = ActiveRecord::Base.current_role)
connection_pool_list(role).each(&:release_connection)
end
# Clears the cache which maps classes.
#
# See ConnectionPool#clear_reloadable_connections! for details.
def clear_reloadable_connections!(role = ActiveRecord::Base.current_role)
connection_pool_list(role).each(&:clear_reloadable_connections!)
end
def clear_all_connections!(role = ActiveRecord::Base.current_role)
connection_pool_list(role).each(&:disconnect!)
end
# Disconnects all currently idle connections.
#
# See ConnectionPool#flush! for details.
def flush_idle_connections!(role = ActiveRecord::Base.current_role)
connection_pool_list(role).each(&:flush!)
end
# Locate the connection of the nearest super class. This can be an
# active or defined connection: if it is the latter, it will be
# opened and set as the active connection for the class it was defined
# for (not necessarily the current class).
def retrieve_connection(spec_name, role: ActiveRecord::Base.current_role, shard: ActiveRecord::Base.current_shard) # :nodoc:
pool = retrieve_connection_pool(spec_name, role: role, shard: shard)
unless pool
if shard != ActiveRecord::Base.default_shard
message = "No connection pool for '#{spec_name}' found for the '#{shard}' shard."
elsif ActiveRecord::Base.connection_handler != ActiveRecord::Base.default_connection_handler
message = "No connection pool for '#{spec_name}' found for the '#{ActiveRecord::Base.current_role}' role."
elsif role != ActiveRecord::Base.default_role
message = "No connection pool for '#{spec_name}' found for the '#{role}' role."
else
message = "No connection pool for '#{spec_name}' found."
end
raise ConnectionNotEstablished, message
end
pool.connection
end
# Returns true if a connection that's accessible to this class has
# already been opened.
def connected?(spec_name, role: ActiveRecord::Base.current_role, shard: ActiveRecord::Base.current_shard)
pool = retrieve_connection_pool(spec_name, role: role, shard: shard)
pool && pool.connected?
end
# Remove the connection for this class. This will close the active
# connection and the defined connection (if they exist). The result
# can be used as an argument for #establish_connection, for easily
# re-establishing the connection.
def remove_connection(owner, role: ActiveRecord::Base.current_role, shard: ActiveRecord::Base.current_shard)
remove_connection_pool(owner, role: role, shard: shard)&.configuration_hash
end
deprecate remove_connection: "Use #remove_connection_pool, which now returns a DatabaseConfig object instead of a Hash"
def remove_connection_pool(owner, role: ActiveRecord::Base.current_role, shard: ActiveRecord::Base.current_shard)
if pool_manager = get_pool_manager(owner)
pool_config = pool_manager.remove_pool_config(role, shard)
if pool_config
pool_config.disconnect!
pool_config.db_config
end
end
end
# Retrieving the connection pool happens a lot, so we cache it in @owner_to_pool_manager.
# This makes retrieving the connection pool O(1) once the process is warm.
# When a connection is established or removed, we invalidate the cache.
def retrieve_connection_pool(owner, role: ActiveRecord::Base.current_role, shard: ActiveRecord::Base.current_shard)
pool_config = get_pool_manager(owner)&.get_pool_config(role, shard)
pool_config&.pool
end
private
attr_reader :owner_to_pool_manager
# Returns the pool manager for an owner.
#
# Using `"primary"` to look up the pool manager for `ActiveRecord::Base` is
# deprecated in favor of looking it up by `"ActiveRecord::Base"`.
#
# During the deprecation period, if `"primary"` is passed, the pool manager
# for `ActiveRecord::Base` will still be returned.
def get_pool_manager(owner)
return owner_to_pool_manager[owner] if owner_to_pool_manager.key?(owner)
if owner == "primary"
ActiveSupport::Deprecation.warn("Using `\"primary\"` as a `connection_specification_name` is deprecated and will be removed in Rails 6.2.0. Please use `ActiveRecord::Base`.")
owner_to_pool_manager[Base.name]
end
end
# Returns an instance of PoolConfig for a given adapter.
# Accepts a hash one layer deep that contains all connection information.
#
# == Example
#
# config = { "production" => { "host" => "localhost", "database" => "foo", "adapter" => "sqlite3" } }
# pool_config = Base.configurations.resolve_pool_config(:production)
# pool_config.db_config.configuration_hash
# # => { host: "localhost", database: "foo", adapter: "sqlite3" }
#
def resolve_pool_config(config, owner_name)
db_config = Base.configurations.resolve(config)
raise(AdapterNotSpecified, "database configuration does not specify adapter") unless db_config.adapter
# Require the adapter itself and give useful feedback about
# 1. Missing adapter gems and
# 2. Adapter gems' missing dependencies.
path_to_adapter = "active_record/connection_adapters/#{db_config.adapter}_adapter"
begin
require path_to_adapter
rescue LoadError => e
# We couldn't require the adapter itself. Raise an exception that
# points out config typos and missing gems.
if e.path == path_to_adapter
# We can assume that a non-builtin adapter was specified, so it's
# either misspelled or missing from Gemfile.
raise LoadError, "Could not load the '#{db_config.adapter}' Active Record adapter. Ensure that the adapter is spelled correctly in config/database.yml and that you've added the necessary adapter gem to your Gemfile.", e.backtrace
# Bubbled up from the adapter require. Prefix the exception message
# with some guidance about how to address it and reraise.
else
raise LoadError, "Error loading the '#{db_config.adapter}' Active Record adapter. Missing a gem it depends on? #{e.message}", e.backtrace
end
end
unless ActiveRecord::Base.respond_to?(db_config.adapter_method)
raise AdapterNotFound, "database configuration specifies nonexistent #{db_config.adapter} adapter"
end
ConnectionAdapters::PoolConfig.new(owner_name, db_config)
end
end
end
end