# -*- coding: utf-8 -*- require 'helper' require 'stringio' class TC_example_match < Test::Unit::TestCase TEST_DIR = File.expand_path(File.dirname(__FILE__)) PERL_OUTDIR = File.join(TEST_DIR, 'perl_output') def setup @file = StringIO.new end def test_a_simple workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # The general syntax is write(row, column, token). Note that row and # column are zero indexed # # Write some text worksheet.write(0, 0, "Hi Excel!") # Write some numbers worksheet.write(2, 0, 3) # Writes 3 worksheet.write(3, 0, 3.00000) # Writes 3 worksheet.write(4, 0, 3.00001) # Writes 3.00001 worksheet.write(5, 0, 3.14159) # TeX revision no.? # Write some formulas worksheet.write(7, 0, '=A3 + A6') worksheet.write(8, 0, '=IF(A5>3,"Yes", "No")') # Write a hyperlink worksheet.write(10, 0, 'http://www.perl.com/') # File save workbook.close # do assertion compare_file("#{PERL_OUTDIR}/a_simple.xls", @file) end def test_autofilter workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet worksheet2 = workbook.add_worksheet worksheet3 = workbook.add_worksheet worksheet4 = workbook.add_worksheet worksheet5 = workbook.add_worksheet worksheet6 = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Extract the data embedded at the end of this file. headings = %w(Region Item Volume Month) data = get_data_for_autofilter # Set up several sheets with the same data. workbook.sheets.each do |worksheet| worksheet.set_column('A:D', 12) worksheet.set_row(0, 20, bold) worksheet.write('A1', headings) end ############################################################################### # # Example 1. Autofilter without conditions. # worksheet1.autofilter('A1:D51') worksheet1.write('A2', [data]) ############################################################################### # # # Example 2. Autofilter with a filter condition in the first column. # # The range in this example is the same as above but in row-column notation. worksheet2.autofilter(0, 0, 50, 3) # The placeholder "Region" in the filter is ignored and can be any string # that adds clarity to the expression. # worksheet2.filter_column(0, 'Region eq East') # # Hide the rows that don't match the filter criteria. # row = 1 data.each do |row_data| region = row_data[0] if region == 'East' # Row is visible. else # Hide row. worksheet2.set_row(row, nil, nil, 1) end worksheet2.write(row, 0, row_data) row += 1 end ############################################################################### # # # Example 3. Autofilter with a dual filter condition in one of the columns. # worksheet3.autofilter('A1:D51') worksheet3.filter_column('A', 'x eq East or x eq South') # # Hide the rows that don't match the filter criteria. # row = 1 data.each do |row_data| region = row_data[0] if region == 'East' || region == 'South' # Row is visible. else # Hide row. worksheet3.set_row(row, nil, nil, 1) end worksheet3.write(row, 0, row_data) row += 1 end ############################################################################### # # # Example 4. Autofilter with filter conditions in two columns. # worksheet4.autofilter('A1:D51') worksheet4.filter_column('A', 'x eq East') worksheet4.filter_column('C', 'x > 3000 and x < 8000' ) # # Hide the rows that don't match the filter criteria. # row = 1 data.each do |row_data| region = row_data[0] volume = row_data[2] if region == 'East' && volume > 3000 && volume < 8000 # Row is visible. else # Hide row. worksheet4.set_row(row, nil, nil, 1) end worksheet4.write(row, 0, row_data) row += 1 end ############################################################################### # # # Example 5. Autofilter with filter for blanks. # # Create a blank cell in our test data. data[5][0] = '' worksheet5.autofilter('A1:D51') worksheet5.filter_column('A', 'x == Blanks') # # Hide the rows that don't match the filter criteria. # row = 1 data.each do |row_data| region = row_data[0] if region == '' # Row is visible. else # Hide row. worksheet5.set_row(row, nil, nil, 1) end worksheet5.write(row, 0, row_data) row += 1 end ############################################################################### # # # Example 6. Autofilter with filter for non-blanks. # worksheet6.autofilter('A1:D51') worksheet6.filter_column('A', 'x == NonBlanks') # # Hide the rows that don't match the filter criteria. # row = 1 data.each do |row_data| region = row_data[0] if region != '' # Row is visible. else # Hide row. worksheet6.set_row(row, nil, nil, 1) end worksheet6.write(row, 0, row_data) row += 1 end workbook.close # do assertion compare_file("#{PERL_OUTDIR}/autofilter.xls", @file) end def get_data_for_autofilter [ ['East', 'Apple', 9000, 'July'], ['East', 'Apple', 5000, 'July'], ['South', 'Orange', 9000, 'September'], ['North', 'Apple', 2000, 'November'], ['West', 'Apple', 9000, 'November'], ['South', 'Pear', 7000, 'October'], ['North', 'Pear', 9000, 'August'], ['West', 'Orange', 1000, 'December'], ['West', 'Grape', 1000, 'November'], ['South', 'Pear', 10000, 'April'], ['West', 'Grape', 6000, 'January'], ['South', 'Orange', 3000, 'May'], ['North', 'Apple', 3000, 'December'], ['South', 'Apple', 7000, 'February'], ['West', 'Grape', 1000, 'December'], ['East', 'Grape', 8000, 'February'], ['South', 'Grape', 10000, 'June'], ['West', 'Pear', 7000, 'December'], ['South', 'Apple', 2000, 'October'], ['East', 'Grape', 7000, 'December'], ['North', 'Grape', 6000, 'April'], ['East', 'Pear', 8000, 'February'], ['North', 'Apple', 7000, 'August'], ['North', 'Orange', 7000, 'July'], ['North', 'Apple', 6000, 'June'], ['South', 'Grape', 8000, 'September'], ['West', 'Apple', 3000, 'October'], ['South', 'Orange', 10000, 'November'], ['West', 'Grape', 4000, 'July'], ['North', 'Orange', 5000, 'August'], ['East', 'Orange', 1000, 'November'], ['East', 'Orange', 4000, 'October'], ['North', 'Grape', 5000, 'August'], ['East', 'Apple', 1000, 'December'], ['South', 'Apple', 10000, 'March'], ['East', 'Grape', 7000, 'October'], ['West', 'Grape', 1000, 'September'], ['East', 'Grape', 10000, 'October'], ['South', 'Orange', 8000, 'March'], ['North', 'Apple', 4000, 'July'], ['South', 'Orange', 5000, 'July'], ['West', 'Apple', 4000, 'June'], ['East', 'Apple', 5000, 'April'], ['North', 'Pear', 3000, 'August'], ['East', 'Grape', 9000, 'November'], ['North', 'Orange', 8000, 'October'], ['East', 'Apple', 10000, 'June'], ['South', 'Pear', 1000, 'December'], ['North', 'Grape', 10000, 'July'], ['East', 'Grape', 6000, 'February'], ] end def test_regions workbook = WriteExcel.new(@file) # Add some worksheets north = workbook.add_worksheet("North") south = workbook.add_worksheet("South") east = workbook.add_worksheet("East") west = workbook.add_worksheet("West") # Add a Format format = workbook.add_format() format.set_bold() format.set_color('blue') # Add a caption to each worksheet workbook.sheets.each do |worksheet| worksheet.write(0, 0, "Sales", format) end # Write some data north.write(0, 1, 200000) south.write(0, 1, 100000) east.write(0, 1, 150000) west.write(0, 1, 100000) # Set the active worksheet bp=1 south.activate() # Set the width of the first column south.set_column(0, 0, 20) # Set the active cell south.set_selection(0, 1) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/regions.xls", @file) end def test_stats workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet('Test data') # Set the column width for columns 1 worksheet.set_column(0, 0, 20) # Create a format for the headings format = workbook.add_format format.set_bold # Write the sample data worksheet.write(0, 0, 'Sample', format) worksheet.write(0, 1, 1) worksheet.write(0, 2, 2) worksheet.write(0, 3, 3) worksheet.write(0, 4, 4) worksheet.write(0, 5, 5) worksheet.write(0, 6, 6) worksheet.write(0, 7, 7) worksheet.write(0, 8, 8) worksheet.write(1, 0, 'Length', format) worksheet.write(1, 1, 25.4) worksheet.write(1, 2, 25.4) worksheet.write(1, 3, 24.8) worksheet.write(1, 4, 25.0) worksheet.write(1, 5, 25.3) worksheet.write(1, 6, 24.9) worksheet.write(1, 7, 25.2) worksheet.write(1, 8, 24.8) # Write some statistical functions worksheet.write(4, 0, 'Count', format) worksheet.write(4, 1, '=COUNT(B1:I1)') worksheet.write(5, 0, 'Sum', format) worksheet.write(5, 1, '=SUM(B2:I2)') worksheet.write(6, 0, 'Average', format) worksheet.write(6, 1, '=AVERAGE(B2:I2)') worksheet.write(7, 0, 'Min', format) worksheet.write(7, 1, '=MIN(B2:I2)') worksheet.write(8, 0, 'Max', format) worksheet.write(8, 1, '=MAX(B2:I2)') worksheet.write(9, 0, 'Standard Deviation', format) worksheet.write(9, 1, '=STDEV(B2:I2)') worksheet.write(10, 0, 'Kurtosis', format) worksheet.write(10, 1, '=KURT(B2:I2)') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/stats.xls", @file) end def test_hyperlink1 # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet('Hyperlinks') # Format the first column worksheet.set_column('A:A', 30) worksheet.set_selection('B1') # Add a sample format format = workbook.add_format format.set_size(12) format.set_bold format.set_color('red') format.set_underline # Write some hyperlinks worksheet.write('A1', 'http://www.perl.com/' ) worksheet.write('A3', 'http://www.perl.com/', 'Perl home' ) worksheet.write('A5', 'http://www.perl.com/', nil, format) worksheet.write('A7', 'mailto:jmcnamara@cpan.org', 'Mail me') # Write a URL that isn't a hyperlink worksheet.write_string('A9', 'http://www.perl.com/') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/hyperlink.xls", @file) end def test_copyformat # Create workbook1 workbook1 = WriteExcel.new(@file) worksheet1 = workbook1.add_worksheet format1a = workbook1.add_format format1b = workbook1.add_format # Create workbook2 file2 = StringIO.new workbook2 = WriteExcel.new(file2) worksheet2 = workbook2.add_worksheet format2a = workbook2.add_format format2b = workbook2.add_format # Create a global format object that isn't tied to a workbook global_format = Writeexcel::Format.new # Set the formatting global_format.set_color('blue') global_format.set_bold global_format.set_italic # Create another example format format1b.set_color('red') # Copy the global format properties to the worksheet formats format1a.copy(global_format) format2a.copy(global_format) # Copy a format from worksheet1 to worksheet2 format2b.copy(format1b) # Write some output worksheet1.write(0, 0, "Ciao", format1a) worksheet1.write(1, 0, "Ciao", format1b) worksheet2.write(0, 0, "Hello", format2a) worksheet2.write(1, 0, "Hello", format2b) workbook1.close workbook2.close # do assertion compare_file("#{PERL_OUTDIR}/workbook1.xls", @file) compare_file("#{PERL_OUTDIR}/workbook2.xls", file2) end def test_data_validate workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Add a format for the header cells. header_format = workbook.add_format( :border => 1, :bg_color => 43, :bold => 1, :text_wrap => 1, :valign => 'vcenter', :indent => 1 ) # Set up layout of the worksheet. worksheet.set_column('A:A', 64) worksheet.set_column('B:B', 15) worksheet.set_column('D:D', 15) worksheet.set_row(0, 36) worksheet.set_selection('B3') # Write the header cells and some data that will be used in the examples. row = 0 heading1 = 'Some examples of data validation in WriteExcel' heading2 = 'Enter values in this column' heading3 = 'Sample Data' worksheet.write('A1', heading1, header_format) worksheet.write('B1', heading2, header_format) worksheet.write('D1', heading3, header_format) worksheet.write('D3', ['Integers', 1, 10]) worksheet.write('D4', ['List data', 'open', 'high', 'close']) worksheet.write('D5', ['Formula', '=AND(F5=50,G5=60)', 50, 60]) # # Example 1. Limiting input to an integer in a fixed range. # txt = 'Enter an integer between 1 and 10' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => 'between', :minimum => 1, :maximum => 10 }) # # Example 2. Limiting input to an integer outside a fixed range. # txt = 'Enter an integer that is not between 1 and 10 (using cell references)' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => 'not between', :minimum => '=E3', :maximum => '=F3' }) # # Example 3. Limiting input to an integer greater than a fixed value. # txt = 'Enter an integer greater than 0' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => '>', :value => 0 }) # # Example 4. Limiting input to an integer less than a fixed value. # txt = 'Enter an integer less than 10' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => '<', :value => 10 }) # # Example 5. Limiting input to a decimal in a fixed range. # txt = 'Enter a decimal between 0.1 and 0.5' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'decimal', :criteria => 'between', :minimum => 0.1, :maximum => 0.5 }) # # Example 6. Limiting input to a value in a dropdown list. # txt = 'Select a value from a drop down list' row += 2 bp=1 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'list', :source => ['open', 'high', 'close'] }) # # Example 6. Limiting input to a value in a dropdown list. # txt = 'Select a value from a drop down list (using a cell range)' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'list', :source => '=E4:G4' }) # # Example 7. Limiting input to a date in a fixed range. # txt = 'Enter a date between 1/1/2008 and 12/12/2008' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'date', :criteria => 'between', :minimum => '2008-01-01T', :maximum => '2008-12-12T' }) # # Example 8. Limiting input to a time in a fixed range. # txt = 'Enter a time between 6:00 and 12:00' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'time', :criteria => 'between', :minimum => 'T06:00', :maximum => 'T12:00' }) # # Example 9. Limiting input to a string greater than a fixed length. # txt = 'Enter a string longer than 3 characters' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'length', :criteria => '>', :value => 3 }) # # Example 10. Limiting input based on a formula. # txt = 'Enter a value if the following is true "=AND(F5=50,G5=60)"' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'custom', :value => '=AND(F5=50,G5=60)' }) # # Example 11. Displaying and modify data validation messages. # txt = 'Displays a message when you select the cell' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => 'between', :minimum => 1, :maximum => 100, :input_title => 'Enter an integer:', :input_message => 'between 1 and 100' }) # # Example 12. Displaying and modify data validation messages. # txt = 'Display a custom error message when integer isn\'t between 1 and 100' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => 'between', :minimum => 1, :maximum => 100, :input_title => 'Enter an integer:', :input_message => 'between 1 and 100', :error_title => 'Input value is not valid!', :error_message => 'It should be an integer between 1 and 100' }) # # Example 13. Displaying and modify data validation messages. # txt = 'Display a custom information message when integer isn\'t between 1 and 100' row += 2 worksheet.write(row, 0, txt) worksheet.data_validation(row, 1, { :validate => 'integer', :criteria => 'between', :minimum => 1, :maximum => 100, :input_title => 'Enter an integer:', :input_message => 'between 1 and 100', :error_title => 'Input value is not valid!', :error_message => 'It should be an integer between 1 and 100', :error_type => 'information' }) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/data_validate.xls", @file) end def test_merge1 workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Increase the cell size of the merged cells to highlight the formatting. worksheet.set_column('B:D', 20) worksheet.set_row(2, 30) # Create a merge format format = workbook.add_format(:center_across => 1) # Only one cell should contain text, the others should be blank. worksheet.write(2, 1, "Center across selection", format) worksheet.write_blank(2, 2, format) worksheet.write_blank(2, 3, format) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge1.xls", @file) end def test_merge2 workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Increase the cell size of the merged cells to highlight the formatting. worksheet.set_column(1, 2, 30) worksheet.set_row(2, 40) # Create a merged format format = workbook.add_format( :center_across => 1, :bold => 1, :size => 15, :pattern => 1, :border => 6, :color => 'white', :fg_color => 'green', :border_color => 'yellow', :align => 'vcenter' ) # Only one cell should contain text, the others should be blank. worksheet.write(2, 1, "Center across selection", format) worksheet.write_blank(2, 2, format) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge2.xls", @file) end def test_merge3 workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet() # Increase the cell size of the merged cells to highlight the formatting. [1, 3,6,7].each { |row| worksheet.set_row(row, 30) } worksheet.set_column('B:D', 20) ############################################################################### # # Example 1: Merge cells containing a hyperlink using write_url_range() # and the standard Excel 5+ merge property. # format1 = workbook.add_format( :center_across => 1, :border => 1, :underline => 1, :color => 'blue' ) # Write the cells to be merged worksheet.write_url_range('B2:D2', 'http://www.perl.com', format1) worksheet.write_blank('C2', format1) worksheet.write_blank('D2', format1) ############################################################################### # # Example 2: Merge cells containing a hyperlink using merge_range(). # format2 = workbook.add_format( :border => 1, :underline => 1, :color => 'blue', :align => 'center', :valign => 'vcenter' ) # Merge 3 cells worksheet.merge_range('B4:D4', 'http://www.perl.com', format2) # Merge 3 cells over two rows worksheet.merge_range('B7:D8', 'http://www.perl.com', format2) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge3.xls", @file) end def test_merge4 # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Increase the cell size of the merged cells to highlight the formatting. (1..11).each { |row| worksheet.set_row(row, 30) } worksheet.set_column('B:D', 20) ############################################################################### # # Example 1: Text centered vertically and horizontally # format1 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'vcenter', :align => 'center' ) worksheet.merge_range('B2:D3', 'Vertical and horizontal', format1) ############################################################################### # # Example 2: Text aligned to the top and left # format2 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'top', :align => 'left' ) worksheet.merge_range('B5:D6', 'Aligned to the top and left', format2) ############################################################################### # # Example 3: Text aligned to the bottom and right # format3 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'bottom', :align => 'right' ) worksheet.merge_range('B8:D9', 'Aligned to the bottom and right', format3) ############################################################################### # # Example 4: Text justified (i.e. wrapped) in the cell # format4 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'top', :align => 'justify' ) worksheet.merge_range('B11:D12', 'Justified: '+'so on and '*18, format4) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge4.xls", @file) end def test_merge5 # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Increase the cell size of the merged cells to highlight the formatting. (3..8).each { |col| worksheet.set_row(col, 36) } [1, 3, 5].each { |n| worksheet.set_column(n, n, 15) } ############################################################################### # # Rotation 1, letters run from top to bottom # format1 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'vcentre', :align => 'centre', :rotation => 270 ) worksheet.merge_range('B4:B9', 'Rotation 270', format1) ############################################################################### # # Rotation 2, 90° anticlockwise # format2 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'vcentre', :align => 'centre', :rotation => 90 ) worksheet.merge_range('D4:D9', 'Rotation 90', format2) ############################################################################### # # Rotation 3, 90° clockwise # format3 = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :valign => 'vcentre', :align => 'centre', :rotation => -90 ) worksheet.merge_range('F4:F9', 'Rotation -90', format3) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge5.xls", @file) end def test_merge6 # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Increase the cell size of the merged cells to highlight the formatting. (2..9).each { |i| worksheet.set_row(i, 36) } worksheet.set_column('B:D', 25) # Format for the merged cells. format = workbook.add_format( :border => 6, :bold => 1, :color => 'red', :size => 20, :valign => 'vcentre', :align => 'left', :indent => 1 ) ############################################################################### # # Write an Ascii string. # worksheet.merge_range('B3:D4', 'ASCII: A simple string', format) ############################################################################### # # Write a UTF-16 Unicode string. # # A phrase in Cyrillic encoded as UTF-16BE. utf16_str = [ '005500540046002d00310036003a0020' << '042d0442043e002004440440043004370430002004' << '3d043000200440044304410441043a043e043c0021' ].pack("H*") # Note the extra parameter at the end to indicate UTF-16 encoding. worksheet.merge_range('B6:D7', utf16_str, format, 1) ############################################################################### # # Write a UTF-8 Unicode string. # smiley = '☺' # chr 0x263a in perl worksheet.merge_range('B9:D10', "UTF-8: A Unicode smiley #{smiley}", format) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/merge6.xls", @file) end def test_images # Create a new workbook called simple.xls and add a worksheet workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet('Image 1') worksheet2 = workbook.add_worksheet('Image 2') worksheet3 = workbook.add_worksheet('Image 3') worksheet4 = workbook.add_worksheet('Image 4') bp=1 # Insert a basic image worksheet1.write('A10', "Image inserted into worksheet.") worksheet1.insert_image('A1', File.join(TEST_DIR,'republic.png')) # Insert an image with an offset worksheet2.write('A10', "Image inserted with an offset.") worksheet2.insert_image('A1', File.join(TEST_DIR,'republic.png'), 32, 10) # Insert a scaled image worksheet3.write('A10', "Image scaled: width x 2, height x 0.8.") worksheet3.insert_image('A1', File.join(TEST_DIR,'republic.png'), 0, 0, 2, 0.8) # Insert an image over varied column and row sizes # This does not require any additional work # Set the cols and row sizes # NOTE: you must do this before you call insert_image() worksheet4.set_column('A:A', 5) worksheet4.set_column('B:B', nil, nil, 1) # Hidden worksheet4.set_column('C:D', 10) worksheet4.set_row(0, 30) worksheet4.set_row(3, 5) worksheet4.write('A10', "Image inserted over scaled rows and columns.") worksheet4.insert_image('A1', File.join(TEST_DIR,'republic.png')) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/images.xls", @file) end def test_tab_colors workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet worksheet2 = workbook.add_worksheet worksheet3 = workbook.add_worksheet worksheet4 = workbook.add_worksheet # Worsheet1 will have the default tab colour. worksheet2.set_tab_color('red') worksheet3.set_tab_color('green') worksheet4.set_tab_color(0x35) # Orange workbook.close # do assertion compare_file("#{PERL_OUTDIR}/tab_colors.xls", @file) end def test_stocks # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Set the column width for columns 1, 2, 3 and 4 worksheet.set_column(0, 3, 15) # Create a format for the column headings header = workbook.add_format header.set_bold header.set_size(12) header.set_color('blue') # Create a format for the stock price f_price = workbook.add_format f_price.set_align('left') f_price.set_num_format('$0.00') # Create a format for the stock volume f_volume = workbook.add_format f_volume.set_align('left') f_volume.set_num_format('#,##0') # Create a format for the price change. This is an example of a conditional # format. The number is formatted as a percentage. If it is positive it is # formatted in green, if it is negative it is formatted in red and if it is # zero it is formatted as the default font colour (in this case black). # Note: the [Green] format produces an unappealing lime green. Try # [Color 10] instead for a dark green. # f_change = workbook.add_format f_change.set_align('left') f_change.set_num_format('[Green]0.0%;[Red]-0.0%;0.0%') # Write out the data worksheet.write(0, 0, 'Company', header) worksheet.write(0, 1, 'Price', header) worksheet.write(0, 2, 'Volume', header) worksheet.write(0, 3, 'Change', header) worksheet.write(1, 0, 'Damage Inc.' ) worksheet.write(1, 1, 30.25, f_price) # $30.25 worksheet.write(1, 2, 1234567, f_volume) # 1,234,567 worksheet.write(1, 3, 0.085, f_change) # 8.5% in green worksheet.write(2, 0, 'Dump Corp.' ) worksheet.write(2, 1, 1.56, f_price) # $1.56 worksheet.write(2, 2, 7564, f_volume) # 7,564 worksheet.write(2, 3, -0.015, f_change) # -1.5% in red worksheet.write(3, 0, 'Rev Ltd.' ) worksheet.write(3, 1, 0.13, f_price) # $0.13 worksheet.write(3, 2, 321, f_volume) # 321 worksheet.write(3, 3, 0, f_change) # 0 in the font color (black) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/stocks.xls", @file) end def test_protection workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet # Create some format objects locked = workbook.add_format(:locked => 1) unlocked = workbook.add_format(:locked => 0) hidden = workbook.add_format(:hidden => 1) # Format the columns worksheet.set_column('A:A', 42) worksheet.set_selection('B3:B3') # Protect the worksheet worksheet.protect # Examples of cell locking and hiding worksheet.write('A1', 'Cell B1 is locked. It cannot be edited.') worksheet.write('B1', '=1+2', locked) worksheet.write('A2', 'Cell B2 is unlocked. It can be edited.') worksheet.write('B2', '=1+2', unlocked) worksheet.write('A3', "Cell B3 is hidden. The formula isn't visible.") worksheet.write('B3', '=1+2', hidden) worksheet.write('A5', 'Use Menu->Tools->Protection->Unprotect Sheet') worksheet.write('A6', 'to remove the worksheet protection. ') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/protection.xls", @file) end def test_date_time # Create a new workbook and add a worksheet workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Expand the first column so that the date is visible. worksheet.set_column("A:B", 30) # Write the column headers worksheet.write('A1', 'Formatted date', bold) worksheet.write('B1', 'Format', bold) # Examples date and time formats. In the output file compare how changing # the format codes change the appearance of the date. # date_formats = [ 'dd/mm/yy', 'mm/dd/yy', '', 'd mm yy', 'dd mm yy', '', 'dd m yy', 'dd mm yy', 'dd mmm yy', 'dd mmmm yy', '', 'dd mm y', 'dd mm yyy', 'dd mm yyyy', '', 'd mmmm yyyy', '', 'dd/mm/yy', 'dd/mm/yy hh:mm', 'dd/mm/yy hh:mm:ss', 'dd/mm/yy hh:mm:ss.000', '', 'hh:mm', 'hh:mm:ss', 'hh:mm:ss.000', ] # Write the same date and time using each of the above formats. The empty # string formats create a blank line to make the example clearer. # row = 0 date_formats.each do |date_format| row += 1 next if date_format == '' # Create a format for the date or time. format = workbook.add_format( :num_format => date_format, :align => 'left' ) # Write the same date using different formats. worksheet.write_date_time(row, 0, '2004-08-01T12:30:45.123', format) worksheet.write(row, 1, date_format) end # The following is an example of an invalid date. It is written as a string instead # of a number. This is also Excel's default behaviour. # row += 2 worksheet.write_date_time(row, 0, '2004-13-01T12:30:45.123') worksheet.write(row, 1, 'Invalid date. Written as string.', bold) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/date_time.xls", @file) end def test_diag_border workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet format1 = workbook.add_format(:diag_type => 1) format2 = workbook.add_format(:diag_type => 2) format3 = workbook.add_format(:diag_type => 3) format4 = workbook.add_format( :diag_type => 3, :diag_border => 7, :diag_color => 'red' ) worksheet.write('B3', 'Text', format1) worksheet.write('B6', 'Text', format2) worksheet.write('B9', 'Text', format3) worksheet.write('B12', 'Text', format4) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/diag_border.xls", @file) end def test_headers workbook = WriteExcel.new(@file) preview = "Select Print Preview to see the header and footer" ###################################################################### # # A simple example to start # worksheet1 = workbook.add_worksheet('Simple') header1 = '&CHere is some centred text.' footer1 = '&LHere is some left aligned text.' worksheet1.set_header(header1) worksheet1.set_footer(footer1) worksheet1.set_column('A:A', 50) worksheet1.write('A1', preview) ###################################################################### # # This is an example of some of the header/footer variables. # worksheet2 = workbook.add_worksheet('Variables') header2 = '&LPage &P of &N'+ '&CFilename: &F' + '&RSheetname: &A' footer2 = '&LCurrent date: &D'+ '&RCurrent time: &T' worksheet2.set_header(header2) worksheet2.set_footer(footer2) worksheet2.set_column('A:A', 50) worksheet2.write('A1', preview) worksheet2.write('A21', "Next sheet") worksheet2.set_h_pagebreaks(20) ###################################################################### # # This example shows how to use more than one font # worksheet3 = workbook.add_worksheet('Mixed fonts') header3 = '&C' + '&"Courier New,Bold"Hello ' + '&"Arial,Italic"World' footer3 = '&C' + '&"Symbol"e' + '&"Arial" = mc&X2' worksheet3.set_header(header3) worksheet3.set_footer(footer3) worksheet3.set_column('A:A', 50) worksheet3.write('A1', preview) ###################################################################### # # Example of line wrapping # worksheet4 = workbook.add_worksheet('Word wrap') header4 = "&CHeading 1\nHeading 2\nHeading 3" worksheet4.set_header(header4) worksheet4.set_column('A:A', 50) worksheet4.write('A1', preview) ###################################################################### # # Example of inserting a literal ampersand & # worksheet5 = workbook.add_worksheet('Ampersand') header5 = "&CCuriouser && Curiouser - Attorneys at Law" worksheet5.set_header(header5) worksheet5.set_column('A:A', 50) worksheet5.write('A1', preview) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/headers.xls", @file) end def test_demo workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet('Demo') worksheet2 = workbook.add_worksheet('Another sheet') worksheet3 = workbook.add_worksheet('And another') bold = workbook.add_format(:bold => 1) ####################################################################### # # Write a general heading # worksheet.set_column('A:A', 36, bold) worksheet.set_column('B:B', 20 ) worksheet.set_row(0, 40 ) heading = workbook.add_format( :bold => 1, :color => 'blue', :size => 16, :merge => 1, :align => 'vcenter' ) headings = ['Features of Spreadsheet::WriteExcel', ''] worksheet.write_row('A1', headings, heading) ####################################################################### # # Some text examples # text_format = workbook.add_format( :bold => 1, :italic => 1, :color => 'red', :size => 18, :font =>'Lucida Calligraphy' ) # A phrase in Cyrillic unicode = [ "042d0442043e002004440440043004370430002004"+ "3d043000200440044304410441043a043e043c0021" ].pack('H*') worksheet.write('A2', "Text") worksheet.write('B2', "Hello Excel") worksheet.write('A3', "Formatted text") worksheet.write('B3', "Hello Excel", text_format) worksheet.write('A4', "Unicode text") worksheet.write_utf16be_string('B4', unicode) ####################################################################### # # Some numeric examples # num1_format = workbook.add_format(:num_format => '$#,##0.00') num2_format = workbook.add_format(:num_format => ' d mmmm yyy') worksheet.write('A5', "Numbers") worksheet.write('B5', 1234.56) worksheet.write('A6', "Formatted numbers") worksheet.write('B6', 1234.56, num1_format) worksheet.write('A7', "Formatted numbers") worksheet.write('B7', 37257, num2_format) ####################################################################### # # Formulae # worksheet.set_selection('B8') worksheet.write('A8', 'Formulas and functions, "=SIN(PI()/4)"') worksheet.write('B8', '=SIN(PI()/4)') ####################################################################### # # Hyperlinks # worksheet.write('A9', "Hyperlinks") worksheet.write('B9', 'http://www.perl.com/' ) ####################################################################### # # Images # worksheet.write('A10', "Images") worksheet.insert_image('B10', "#{TEST_DIR}/republic.png", 16, 8) ####################################################################### # # Misc # worksheet.write('A18', "Page/printer setup") worksheet.write('A19', "Multiple worksheets") workbook.close # do assertion compare_file("#{PERL_OUTDIR}/demo.xls", @file) end def test_unicode_cyrillic # Create a Russian worksheet name in utf8. sheet = [0x0421, 0x0442, 0x0440, 0x0430, 0x043D, 0x0438, 0x0446, 0x0430].pack("U*") # Create a Russian string. str = [0x0417, 0x0434, 0x0440, 0x0430, 0x0432, 0x0441, 0x0442, 0x0432, 0x0443, 0x0439, 0x0020, 0x041C, 0x0438, 0x0440, 0x0021].pack("U*") workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet(sheet + '1') worksheet.set_column('A:A', 18) worksheet.write('A1', str) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/unicode_cyrillic.xls", @file) end def test_defined_name workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet worksheet2 = workbook.add_worksheet workbook.define_name('Exchange_rate', '=0.96') workbook.define_name('Sales', '=Sheet1!$G$1:$H$10') workbook.define_name('Sheet2!Sales', '=Sheet2!$G$1:$G$10') workbook.sheets.each do |worksheet| worksheet.set_column('A:A', 45) worksheet.write('A2', 'This worksheet contains some defined names,') worksheet.write('A3', 'See the Insert -> Name -> Define dialog.') end worksheet1.write('A4', '=Exchange_rate') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/defined_name.xls", @file) end def test_chart_area workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Add the data to the worksheet that the charts will refer to. headings = [ 'Category', 'Values 1', 'Values 2' ] data = [ [ 2, 3, 4, 5, 6, 7 ], [ 1, 4, 5, 2, 1, 5 ], [ 3, 6, 7, 5, 4, 3 ] ] worksheet.write('A1', headings, bold) worksheet.write('A2', data) ############################################################################### # # Example 1. A minimal chart. # chart1 = workbook.add_chart(:type => 'Chart::Area') # Add values only. Use the default categories. chart1.add_series( :values => '=Sheet1!$B$2:$B$7' ) ############################################################################### # # Example 2. A minimal chart with user specified categories (X axis) # and a series name. # chart2 = workbook.add_chart(:type => 'Chart::Area') # Configure the series. chart2.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) ############################################################################### # # Example 3. Same as previous chart but with added title and axes labels. # chart3 = workbook.add_chart(:type => 'Chart::Area') # Configure the series. chart3.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart3.set_title( :name => 'Results of sample analysis' ) chart3.set_x_axis( :name => 'Sample number' ) chart3.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 4. Same as previous chart but with an added series # chart4 = workbook.add_chart(:name => 'Results Chart', :type => 'Chart::Area') # Configure the series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add another series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$C$2:$C$7', :name => 'Test data series 2' ) # Add some labels. chart4.set_title( :name => 'Results of sample analysis' ) chart4.set_x_axis( :name => 'Sample number' ) chart4.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 5. Same as Example 3 but as an embedded chart. # chart5 = workbook.add_chart(:type => 'Chart::Area', :embedded => 1) # Configure the series. chart5.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart5.set_title(:name => 'Results of sample analysis' ) chart5.set_x_axis(:name => 'Sample number') chart5.set_y_axis(:name => 'Sample length (cm)') # Insert the chart into the main worksheet. worksheet.insert_chart('E2', chart5) # File save workbook.close # do assertion compare_file("#{PERL_OUTDIR}/chart_area.xls", @file) end def test_chart_bar workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Add the data to the worksheet that the charts will refer to. headings = [ 'Category', 'Values 1', 'Values 2' ] data = [ [ 2, 3, 4, 5, 6, 7 ], [ 1, 4, 5, 2, 1, 5 ], [ 3, 6, 7, 5, 4, 3 ] ] worksheet.write('A1', headings, bold) worksheet.write('A2', data) ############################################################################### # # Example 1. A minimal chart. # chart1 = workbook.add_chart(:type => 'Chart::Bar') # Add values only. Use the default categories. chart1.add_series( :values => '=Sheet1!$B$2:$B$7' ) ############################################################################### # # Example 2. A minimal chart with user specified categories (X axis) # and a series name. # chart2 = workbook.add_chart(:type => 'Chart::Bar') # Configure the series. chart2.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) ############################################################################### # # Example 3. Same as previous chart but with added title and axes labels. # chart3 = workbook.add_chart(:type => 'Chart::Bar') # Configure the series. chart3.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart3.set_title( :name => 'Results of sample analysis' ) chart3.set_x_axis( :name => 'Sample number' ) chart3.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 4. Same as previous chart but with an added series # chart4 = workbook.add_chart(:name => 'Results Chart', :type => 'Chart::Bar') # Configure the series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add another series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$C$2:$C$7', :name => 'Test data series 2' ) # Add some labels. chart4.set_title( :name => 'Results of sample analysis' ) chart4.set_x_axis( :name => 'Sample number' ) chart4.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 5. Same as Example 3 but as an embedded chart. # chart5 = workbook.add_chart(:type => 'Chart::Bar', :embedded => 1) # Configure the series. chart5.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart5.set_title(:name => 'Results of sample analysis' ) chart5.set_x_axis(:name => 'Sample number') chart5.set_y_axis(:name => 'Sample length (cm)') # Insert the chart into the main worksheet. worksheet.insert_chart('E2', chart5) # File save workbook.close # do assertion compare_file("#{PERL_OUTDIR}/chart_bar.xls", @file) end def test_chart_column workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Add the data to the worksheet that the charts will refer to. headings = [ 'Category', 'Values 1', 'Values 2' ] data = [ [ 2, 3, 4, 5, 6, 7 ], [ 1, 4, 5, 2, 1, 5 ], [ 3, 6, 7, 5, 4, 3 ] ] worksheet.write('A1', headings, bold) worksheet.write('A2', data) ############################################################################### # # Example 1. A minimal chart. # chart1 = workbook.add_chart(:type => 'Chart::Column') # Add values only. Use the default categories. chart1.add_series( :values => '=Sheet1!$B$2:$B$7' ) ############################################################################### # # Example 2. A minimal chart with user specified categories (X axis) # and a series name. # chart2 = workbook.add_chart(:type => 'Chart::Column') # Configure the series. chart2.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) ############################################################################### # # Example 3. Same as previous chart but with added title and axes labels. # chart3 = workbook.add_chart(:type => 'Chart::Column') # Configure the series. chart3.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart3.set_title( :name => 'Results of sample analysis' ) chart3.set_x_axis( :name => 'Sample number' ) chart3.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 4. Same as previous chart but with an added series # chart4 = workbook.add_chart(:name => 'Results Chart', :type => 'Chart::Column') # Configure the series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add another series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$C$2:$C$7', :name => 'Test data series 2' ) # Add some labels. chart4.set_title( :name => 'Results of sample analysis' ) chart4.set_x_axis( :name => 'Sample number' ) chart4.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 5. Same as Example 3 but as an embedded chart. # chart5 = workbook.add_chart(:type => 'Chart::Column', :embedded => 1) # Configure the series. chart5.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart5.set_title(:name => 'Results of sample analysis' ) chart5.set_x_axis(:name => 'Sample number') chart5.set_y_axis(:name => 'Sample length (cm)') # Insert the chart into the main worksheet. worksheet.insert_chart('E2', chart5) # File save workbook.close # do assertion compare_file("#{PERL_OUTDIR}/chart_column.xls", @file) end def test_chart_line workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet bold = workbook.add_format(:bold => 1) # Add the data to the worksheet that the charts will refer to. headings = [ 'Category', 'Values 1', 'Values 2' ] data = [ [ 2, 3, 4, 5, 6, 7 ], [ 1, 4, 5, 2, 1, 5 ], [ 3, 6, 7, 5, 4, 3 ] ] worksheet.write('A1', headings, bold) worksheet.write('A2', data) ############################################################################### # # Example 1. A minimal chart. # chart1 = workbook.add_chart(:type => 'Chart::Line') # Add values only. Use the default categories. chart1.add_series( :values => '=Sheet1!$B$2:$B$7' ) ############################################################################### # # Example 2. A minimal chart with user specified categories (X axis) # and a series name. # chart2 = workbook.add_chart(:type => 'Chart::Line') # Configure the series. chart2.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) ############################################################################### # # Example 3. Same as previous chart but with added title and axes labels. # chart3 = workbook.add_chart(:type => 'Chart::Line') # Configure the series. chart3.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart3.set_title( :name => 'Results of sample analysis' ) chart3.set_x_axis( :name => 'Sample number' ) chart3.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 4. Same as previous chart but with an added series # chart4 = workbook.add_chart(:name => 'Results Chart', :type => 'Chart::Line') # Configure the series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add another series. chart4.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$C$2:$C$7', :name => 'Test data series 2' ) # Add some labels. chart4.set_title( :name => 'Results of sample analysis' ) chart4.set_x_axis( :name => 'Sample number' ) chart4.set_y_axis( :name => 'Sample length (cm)' ) ############################################################################### # # Example 5. Same as Example 3 but as an embedded chart. # chart5 = workbook.add_chart(:type => 'Chart::Line', :embedded => 1) # Configure the series. chart5.add_series( :categories => '=Sheet1!$A$2:$A$7', :values => '=Sheet1!$B$2:$B$7', :name => 'Test data series 1' ) # Add some labels. chart5.set_title(:name => 'Results of sample analysis' ) chart5.set_x_axis(:name => 'Sample number') chart5.set_y_axis(:name => 'Sample length (cm)') # Insert the chart into the main worksheet. worksheet.insert_chart('E2', chart5) # File save workbook.close # do assertion compare_file("#{PERL_OUTDIR}/chart_line.xls", @file) end def test_chess workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet() # Some row and column formatting worksheet.set_column('B:I', 10) (1..8).each { |i| worksheet.set_row(i, 50) } # Define the property hashes # black = { 'fg_color' => 'black', 'pattern' => 1, } top = { 'top' => 6 } bottom = { 'bottom' => 6 } left = { 'left' => 6 } right = { 'right' => 6 } # Define the formats # format01 = workbook.add_format(top.merge(left)) format02 = workbook.add_format(top.merge(black)) format03 = workbook.add_format(top) format04 = workbook.add_format(top.merge(right).merge(black)) format05 = workbook.add_format(left) format06 = workbook.add_format(black) format07 = workbook.add_format format08 = workbook.add_format(right.merge(black)) format09 = workbook.add_format(right) format10 = workbook.add_format(left.merge(black)) format11 = workbook.add_format(bottom.merge(left).merge(black)) format12 = workbook.add_format(bottom) format13 = workbook.add_format(bottom.merge(black)) format14 = workbook.add_format(bottom.merge(right)) # Draw the pattern worksheet.write('B2', '', format01) worksheet.write('C2', '', format02) worksheet.write('D2', '', format03) worksheet.write('E2', '', format02) worksheet.write('F2', '', format03) worksheet.write('G2', '', format02) worksheet.write('H2', '', format03) worksheet.write('I2', '', format04) worksheet.write('B3', '', format10) worksheet.write('C3', '', format07) worksheet.write('D3', '', format06) worksheet.write('E3', '', format07) worksheet.write('F3', '', format06) worksheet.write('G3', '', format07) worksheet.write('H3', '', format06) worksheet.write('I3', '', format09) worksheet.write('B4', '', format05) worksheet.write('C4', '', format06) worksheet.write('D4', '', format07) worksheet.write('E4', '', format06) worksheet.write('F4', '', format07) worksheet.write('G4', '', format06) worksheet.write('H4', '', format07) worksheet.write('I4', '', format08) worksheet.write('B5', '', format10) worksheet.write('C5', '', format07) worksheet.write('D5', '', format06) worksheet.write('E5', '', format07) worksheet.write('F5', '', format06) worksheet.write('G5', '', format07) worksheet.write('H5', '', format06) worksheet.write('I5', '', format09) worksheet.write('B6', '', format05) worksheet.write('C6', '', format06) worksheet.write('D6', '', format07) worksheet.write('E6', '', format06) worksheet.write('F6', '', format07) worksheet.write('G6', '', format06) worksheet.write('H6', '', format07) worksheet.write('I6', '', format08) worksheet.write('B7', '', format10) worksheet.write('C7', '', format07) worksheet.write('D7', '', format06) worksheet.write('E7', '', format07) worksheet.write('F7', '', format06) worksheet.write('G7', '', format07) worksheet.write('H7', '', format06) worksheet.write('I7', '', format09) worksheet.write('B8', '', format05) worksheet.write('C8', '', format06) worksheet.write('D8', '', format07) worksheet.write('E8', '', format06) worksheet.write('F8', '', format07) worksheet.write('G8', '', format06) worksheet.write('H8', '', format07) worksheet.write('I8', '', format08) worksheet.write('B9', '', format11) worksheet.write('C9', '', format12) worksheet.write('D9', '', format13) worksheet.write('E9', '', format12) worksheet.write('F9', '', format13) worksheet.write('G9', '', format12) worksheet.write('H9', '', format13) worksheet.write('I9', '', format14) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/chess.xls", @file) end def test_colors workbook = WriteExcel.new(@file) # Some common formats center = workbook.add_format(:align => 'center') heading = workbook.add_format(:align => 'center', :bold => 1) ###################################################################### # # Demonstrate the named colors. # order = [ 0x21, 0x0B, 0x35, 0x11, 0x16, 0x12, 0x0D, 0x10, 0x17, 0x09, 0x0C, 0x0F, 0x0E, 0x14, 0x08, 0x0A ] colors = { 0x08 => 'black', 0x0C => 'blue', 0x10 => 'brown', 0x0F => 'cyan', 0x17 => 'gray', 0x11 => 'green', 0x0B => 'lime', 0x0E => 'magenta', 0x12 => 'navy', 0x35 => 'orange', 0x21 => 'pink', 0x14 => 'purple', 0x0A => 'red', 0x16 => 'silver', 0x09 => 'white', 0x0D => 'yellow', } worksheet1 = workbook.add_worksheet('Named colors') worksheet1.set_column(0, 3, 15) worksheet1.write(0, 0, "Index", heading) worksheet1.write(0, 1, "Index", heading) worksheet1.write(0, 2, "Name", heading) worksheet1.write(0, 3, "Color", heading) i = 1 # original was colors.each.... # order unmatch between perl and ruby (of cource, it's hash!) # so i use order array to match perl's xls order. # order.each do |index| format = workbook.add_format( :fg_color => colors[index], :pattern => 1, :border => 1 ) worksheet1.write(i + 1, 0, index, center) worksheet1.write(i + 1, 1, sprintf("0x%02X", index), center) worksheet1.write(i + 1, 2, colors[index], center) worksheet1.write(i + 1, 3, '', format) i += 1 end ###################################################################### # # Demonstrate the standard Excel colors in the range 8..63. # worksheet2 = workbook.add_worksheet('Standard colors') worksheet2.set_column(0, 3, 15) worksheet2.write(0, 0, "Index", heading) worksheet2.write(0, 1, "Index", heading) worksheet2.write(0, 2, "Color", heading) worksheet2.write(0, 3, "Name", heading) (8..63).each do |i| format = workbook.add_format( :fg_color => i, :pattern => 1, :border => 1 ) worksheet2.write((i - 7), 0, i, center) worksheet2.write((i - 7), 1, sprintf("0x%02X", i), center) worksheet2.write((i - 7), 2, '', format) # Add the color names if colors.has_key?(i) worksheet2.write((i - 7), 3, colors[i], center) end end workbook.close # do assertion compare_file("#{PERL_OUTDIR}/colors.xls", @file) end def test_comments1 workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet worksheet.write('A1', 'Hello') worksheet.write_comment('A1', 'This is a comment') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/comments1.xls", @file) end def test_comments2 workbook = WriteExcel.new(@file) text_wrap = workbook.add_format(:text_wrap => 1, :valign => 'top') worksheet1 = workbook.add_worksheet worksheet2 = workbook.add_worksheet worksheet3 = workbook.add_worksheet worksheet4 = workbook.add_worksheet worksheet5 = workbook.add_worksheet worksheet6 = workbook.add_worksheet worksheet7 = workbook.add_worksheet worksheet8 = workbook.add_worksheet # Variables that we will use in each example. cell_text = '' comment = '' ############################################################################### # # Example 1. Demonstrates a simple cell comment without formatting and Unicode # comments encoded as UTF-16 and as UTF-8. # # Set up some formatting. worksheet1.set_column('C:C', 25) worksheet1.set_row(2, 50) worksheet1.set_row(5, 50) # Simple ascii string. cell_text = 'Hold the mouse over this cell to see the comment.' comment = 'This is a comment.' worksheet1.write('C3', cell_text, text_wrap) worksheet1.write_comment('C3', comment) # UTF-16 string. cell_text = 'This is a UTF-16 comment.' comment = [0x263a].pack("n") worksheet1.write('C6', cell_text, text_wrap) worksheet1.write_comment('C6', comment, :encoding => 1) # UTF-8 string. worksheet1.set_row(8, 50) cell_text = 'This is a UTF-8 string.' comment = '☺' # chr 0x263a in perl. worksheet1.write('C9', cell_text, text_wrap) worksheet1.write_comment('C9', comment) ############################################################################### # # Example 2. Demonstrates visible and hidden comments. # # Set up some formatting. worksheet2.set_column('C:C', 25) worksheet2.set_row(2, 50) worksheet2.set_row(5, 50) cell_text = 'This cell comment is visible.' comment = 'Hello.' worksheet2.write('C3', cell_text, text_wrap) worksheet2.write_comment('C3', comment, :visible => 1) cell_text = "This cell comment isn't visible (the default)." comment = 'Hello.' worksheet2.write('C6', cell_text, text_wrap) worksheet2.write_comment('C6', comment) ############################################################################### # # Example 3. Demonstrates visible and hidden comments set at the worksheet # level. # # Set up some formatting. worksheet3.set_column('C:C', 25) worksheet3.set_row(2, 50) worksheet3.set_row(5, 50) worksheet3.set_row(8, 50) # Make all comments on the worksheet visible. worksheet3.show_comments cell_text = 'This cell comment is visible, explicitly.' comment = 'Hello.' worksheet3.write('C3', cell_text, text_wrap) worksheet3.write_comment('C3', comment, :visible => 1) cell_text = 'This cell comment is also visible because ' + 'we used show_comments().' comment = 'Hello.' worksheet3.write('C6', cell_text, text_wrap) worksheet3.write_comment('C6', comment) cell_text = 'However, we can still override it locally.' comment = 'Hello.' worksheet3.write('C9', cell_text, text_wrap) worksheet3.write_comment('C9', comment, :visible => 0) ############################################################################### # # Example 4. Demonstrates changes to the comment box dimensions. # # Set up some formatting. worksheet4.set_column('C:C', 25) worksheet4.set_row(2, 50) worksheet4.set_row(5, 50) worksheet4.set_row(8, 50) worksheet4.set_row(15, 50) worksheet4.show_comments cell_text = 'This cell comment is default size.' comment = 'Hello.' worksheet4.write('C3', cell_text, text_wrap) worksheet4.write_comment('C3', comment) cell_text = 'This cell comment is twice as wide.' comment = 'Hello.' worksheet4.write('C6', cell_text, text_wrap) worksheet4.write_comment('C6', comment, :x_scale => 2) cell_text = 'This cell comment is twice as high.' comment = 'Hello.' worksheet4.write('C9', cell_text, text_wrap) worksheet4.write_comment('C9', comment, :y_scale => 2) cell_text = 'This cell comment is scaled in both directions.' comment = 'Hello.' worksheet4.write('C16', cell_text, text_wrap) worksheet4.write_comment('C16', comment, :x_scale => 1.2, :y_scale => 0.8) cell_text = 'This cell comment has width and height specified in pixels.' comment = 'Hello.' worksheet4.write('C19', cell_text, text_wrap) worksheet4.write_comment('C19', comment, :width => 200, :height => 20) ############################################################################### # # Example 5. Demonstrates changes to the cell comment position. # worksheet5.set_column('C:C', 25) worksheet5.set_row(2, 50) worksheet5.set_row(5, 50) worksheet5.set_row(8, 50) worksheet5.set_row(11, 50) worksheet5.show_comments cell_text = 'This cell comment is in the default position.' comment = 'Hello.' worksheet5.write('C3', cell_text, text_wrap) worksheet5.write_comment('C3', comment) cell_text = 'This cell comment has been moved to another cell.' comment = 'Hello.' worksheet5.write('C6', cell_text, text_wrap) worksheet5.write_comment('C6', comment, :start_cell => 'E4') cell_text = 'This cell comment has been moved to another cell.' comment = 'Hello.' worksheet5.write('C9', cell_text, text_wrap) worksheet5.write_comment('C9', comment, :start_row => 8, :start_col => 4) cell_text = 'This cell comment has been shifted within its default cell.' comment = 'Hello.' worksheet5.write('C12', cell_text, text_wrap) worksheet5.write_comment('C12', comment, :x_offset => 30, :y_offset => 12) ############################################################################### # # Example 6. Demonstrates changes to the comment background colour. # worksheet6.set_column('C:C', 25) worksheet6.set_row(2, 50) worksheet6.set_row(5, 50) worksheet6.set_row(8, 50) worksheet6.show_comments cell_text = 'This cell comment has a different colour.' comment = 'Hello.' worksheet6.write('C3', cell_text, text_wrap) worksheet6.write_comment('C3', comment, :color => 'green') cell_text = 'This cell comment has the default colour.' comment = 'Hello.' worksheet6.write('C6', cell_text, text_wrap) worksheet6.write_comment('C6', comment) cell_text = 'This cell comment has a different colour.' comment = 'Hello.' worksheet6.write('C9', cell_text, text_wrap) worksheet6.write_comment('C9', comment, :color => 0x35) ############################################################################### # # Example 7. Demonstrates how to set the cell comment author. # worksheet7.set_column('C:C', 30) worksheet7.set_row(2, 50) worksheet7.set_row(5, 50) worksheet7.set_row(8, 50) worksheet7.set_row(11, 50) author = '' cell = 'C3' cell_text = "Move the mouse over this cell and you will see 'Cell commented "+ "by #{author}' (blank) in the status bar at the bottom" comment = 'Hello.' worksheet7.write(cell, cell_text, text_wrap) worksheet7.write_comment(cell, comment) author = 'Perl' cell = 'C6' cell_text = "Move the mouse over this cell and you will see 'Cell commented " + "by #{author}' in the status bar at the bottom" comment = 'Hello.' worksheet7.write(cell, cell_text, text_wrap) worksheet7.write_comment(cell, comment, :author => author) author = [0x20AC].pack("n") # UTF-16 Euro cell = 'C9' cell_text = "Move the mouse over this cell and you will see 'Cell commented " + "by Euro' in the status bar at the bottom" comment = 'Hello.' worksheet7.write(cell, cell_text, text_wrap) worksheet7.write_comment(cell, comment, :author => author, :author_encoding => 1) # UTF-8 string. author = '☺' # smiley cell = 'C12' cell_text = "Move the mouse over this cell and you will see 'Cell commented " + "by #{author}' in the status bar at the bottom" comment = 'Hello.' worksheet7.write(cell, cell_text, text_wrap) worksheet7.write_comment(cell, comment, :author => author) ############################################################################### # # Example 8. Demonstrates the need to explicitly set the row height. # # Set up some formatting. worksheet8.set_column('C:C', 25) worksheet8.set_row(2, 80) worksheet8.show_comments cell_text = 'The height of this row has been adjusted explicitly using ' + 'set_row(). The size of the comment box is adjusted ' + 'accordingly by WriteExcel.' comment = 'Hello.' worksheet8.write('C3', cell_text, text_wrap) worksheet8.write_comment('C3', comment) cell_text = 'The height of this row has been adjusted by Excel due to the ' + 'text wrap property being set. Unfortunately this means that ' + 'the height of the row is unknown to WriteExcel at run time ' + "and thus the comment box is stretched as well.\n\n" + 'Use set_row() to specify the row height explicitly to avoid ' + 'this problem.' comment = 'Hello.' worksheet8.write('C6', cell_text, text_wrap) worksheet8.write_comment('C6', comment) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/comments2.xls", @file) end def test_formula_result workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet() format = workbook.add_format(:color => 'blue') worksheet.write('A1', '=1+2') worksheet.write('A2', '=1+2', format, 4) worksheet.write('A3', '="ABC"', nil, 'DEF') worksheet.write('A4', '=IF(A1 > 1, TRUE, FALSE)', nil, 'TRUE') worksheet.write('A5', '=1/0', nil, '#DIV/0!') workbook.close # do assertion compare_file("#{PERL_OUTDIR}/formula_result.xls", @file) end def test_indent workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet() indent1 = workbook.add_format(:indent => 1) indent2 = workbook.add_format(:indent => 2) worksheet.set_column('A:A', 40) worksheet.write('A1', "This text is indented 1 level", indent1) worksheet.write('A2', "This text is indented 2 levels", indent2) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/indent.xls", @file) end def test_outline # Create a new workbook and add some worksheets workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet('Outlined Rows') worksheet2 = workbook.add_worksheet('Collapsed Rows') worksheet3 = workbook.add_worksheet('Outline Columns') worksheet4 = workbook.add_worksheet('Outline levels') # Add a general format bold = workbook.add_format(:bold => 1) ############################################################################### # # Example 1: Create a worksheet with outlined rows. It also includes SUBTOTAL() # functions so that it looks like the type of automatic outlines that are # generated when you use the Excel Data->SubTotals menu item. # # For outlines the important parameters are $hidden and $level. Rows with the # same $level are grouped together. The group will be collapsed if $hidden is # non-zero. $height and $XF are assigned default values if they are undef. # # The syntax is: set_row($row, $height, $XF, $hidden, $level, $collapsed) # worksheet1.set_row(1, nil, nil, 0, 2) worksheet1.set_row(2, nil, nil, 0, 2) worksheet1.set_row(3, nil, nil, 0, 2) worksheet1.set_row(4, nil, nil, 0, 2) worksheet1.set_row(5, nil, nil, 0, 1) worksheet1.set_row(6, nil, nil, 0, 2) worksheet1.set_row(7, nil, nil, 0, 2) worksheet1.set_row(8, nil, nil, 0, 2) worksheet1.set_row(9, nil, nil, 0, 2) worksheet1.set_row(10, nil, nil, 0, 1) # Add a column format for clarity worksheet1.set_column('A:A', 20) # Add the data, labels and formulas worksheet1.write('A1', 'Region', bold) worksheet1.write('A2', 'North') worksheet1.write('A3', 'North') worksheet1.write('A4', 'North') worksheet1.write('A5', 'North') worksheet1.write('A6', 'North Total', bold) worksheet1.write('B1', 'Sales', bold) worksheet1.write('B2', 1000) worksheet1.write('B3', 1200) worksheet1.write('B4', 900) worksheet1.write('B5', 1200) worksheet1.write('B6', '=SUBTOTAL(9,B2:B5)', bold) worksheet1.write('A7', 'South') worksheet1.write('A8', 'South') worksheet1.write('A9', 'South') worksheet1.write('A10', 'South') worksheet1.write('A11', 'South Total', bold) worksheet1.write('B7', 400) worksheet1.write('B8', 600) worksheet1.write('B9', 500) worksheet1.write('B10', 600) worksheet1.write('B11', '=SUBTOTAL(9,B7:B10)', bold) worksheet1.write('A12', 'Grand Total', bold) worksheet1.write('B12', '=SUBTOTAL(9,B2:B10)', bold) ############################################################################### # # Example 2: Create a worksheet with outlined rows. This is the same as the # previous example except that the rows are collapsed. # Note: We need to indicate the row that contains the collapsed symbol '+' # with the optional parameter, $collapsed. # The group will be collapsed if $hidden is non-zero. # The syntax is: set_row($row, $height, $XF, $hidden, $level, $collapsed) # worksheet2.set_row(1, nil, nil, 1, 2) worksheet2.set_row(2, nil, nil, 1, 2) worksheet2.set_row(3, nil, nil, 1, 2) worksheet2.set_row(4, nil, nil, 1, 2) worksheet2.set_row(5, nil, nil, 1, 1) worksheet2.set_row(6, nil, nil, 1, 2) worksheet2.set_row(7, nil, nil, 1, 2) worksheet2.set_row(8, nil, nil, 1, 2) worksheet2.set_row(9, nil, nil, 1, 2) worksheet2.set_row(10, nil, nil, 1, 1) worksheet2.set_row(11, nil, nil, 0, 0, 1) # Add a column format for clarity worksheet2.set_column('A:A', 20) # Add the data, labels and formulas worksheet2.write('A1', 'Region', bold) worksheet2.write('A2', 'North') worksheet2.write('A3', 'North') worksheet2.write('A4', 'North') worksheet2.write('A5', 'North') worksheet2.write('A6', 'North Total', bold) worksheet2.write('B1', 'Sales', bold) worksheet2.write('B2', 1000) worksheet2.write('B3', 1200) worksheet2.write('B4', 900) worksheet2.write('B5', 1200) worksheet2.write('B6', '=SUBTOTAL(9,B2:B5)', bold) worksheet2.write('A7', 'South') worksheet2.write('A8', 'South') worksheet2.write('A9', 'South') worksheet2.write('A10', 'South') worksheet2.write('A11', 'South Total', bold) worksheet2.write('B7', 400) worksheet2.write('B8', 600) worksheet2.write('B9', 500) worksheet2.write('B10', 600) worksheet2.write('B11', '=SUBTOTAL(9,B7:B10)', bold) worksheet2.write('A12', 'Grand Total', bold) worksheet2.write('B12', '=SUBTOTAL(9,B2:B10)', bold) ############################################################################### # # Example 3: Create a worksheet with outlined columns. # data = [ ['Month', 'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', ' Total'], ['North', 50, 20, 15, 25, 65, 80, '=SUM(B2:G2)'], ['South', 10, 20, 30, 50, 50, 50, '=SUM(B3:G3)'], ['East', 45, 75, 50, 15, 75, 100, '=SUM(B4:G4)'], ['West', 15, 15, 55, 35, 20, 50, '=SUM(B5:G6)'] ] # Add bold format to the first row worksheet3.set_row(0, nil, bold) # Syntax: set_column(col1, col2, width, XF, hidden, level, collapsed) worksheet3.set_column('A:A', 10, bold ) worksheet3.set_column('B:G', 5, nil, 0, 1) worksheet3.set_column('H:H', 10) # Write the data and a formula worksheet3.write_col('A1', data) worksheet3.write('H6', '=SUM(H2:H5)', bold) ############################################################################### # # Example 4: Show all possible outline levels. # levels = [ "Level 1", "Level 2", "Level 3", "Level 4", "Level 5", "Level 6", "Level 7", "Level 6", "Level 5", "Level 4", "Level 3", "Level 2", "Level 1" ] worksheet4.write_col('A1', levels) worksheet4.set_row(0, nil, nil, nil, 1) worksheet4.set_row(1, nil, nil, nil, 2) worksheet4.set_row(2, nil, nil, nil, 3) worksheet4.set_row(3, nil, nil, nil, 4) worksheet4.set_row(4, nil, nil, nil, 5) worksheet4.set_row(5, nil, nil, nil, 6) worksheet4.set_row(6, nil, nil, nil, 7) worksheet4.set_row(7, nil, nil, nil, 6) worksheet4.set_row(8, nil, nil, nil, 5) worksheet4.set_row(9, nil, nil, nil, 4) worksheet4.set_row(10, nil, nil, nil, 3) worksheet4.set_row(11, nil, nil, nil, 2) worksheet4.set_row(12, nil, nil, nil, 1) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/outline.xls", @file) end def test_outline_collapsed # Create a new workbook and add some worksheets workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet('Outlined Rows') worksheet2 = workbook.add_worksheet('Collapsed Rows 1') worksheet3 = workbook.add_worksheet('Collapsed Rows 2') worksheet4 = workbook.add_worksheet('Collapsed Rows 3') worksheet5 = workbook.add_worksheet('Outline Columns') worksheet6 = workbook.add_worksheet('Collapsed Columns') # Add a general format bold = workbook.add_format(:bold => 1) # # This function will generate the same data and sub-totals on each worksheet. # def create_sub_totals(worksheet, bold) # Add a column format for clarity worksheet.set_column('A:A', 20) # Add the data, labels and formulas worksheet.write('A1', 'Region', bold) worksheet.write('A2', 'North') worksheet.write('A3', 'North') worksheet.write('A4', 'North') worksheet.write('A5', 'North') worksheet.write('A6', 'North Total', bold) worksheet.write('B1', 'Sales', bold) worksheet.write('B2', 1000) worksheet.write('B3', 1200) worksheet.write('B4', 900) worksheet.write('B5', 1200) worksheet.write('B6', '=SUBTOTAL(9,B2:B5)', bold) worksheet.write('A7', 'South') worksheet.write('A8', 'South') worksheet.write('A9', 'South') worksheet.write('A10', 'South') worksheet.write('A11', 'South Total', bold) worksheet.write('B7', 400) worksheet.write('B8', 600) worksheet.write('B9', 500) worksheet.write('B10', 600) worksheet.write('B11', '=SUBTOTAL(9,B7:B10)', bold) worksheet.write('A12', 'Grand Total', bold) worksheet.write('B12', '=SUBTOTAL(9,B2:B10)', bold) end ############################################################################### # # Example 1: Create a worksheet with outlined rows. It also includes SUBTOTAL() # functions so that it looks like the type of automatic outlines that are # generated when you use the Excel Data.SubTotals menu item. # # The syntax is: set_row(row, height, XF, hidden, level, collapsed) worksheet1.set_row(1, nil, nil, 0, 2) worksheet1.set_row(2, nil, nil, 0, 2) worksheet1.set_row(3, nil, nil, 0, 2) worksheet1.set_row(4, nil, nil, 0, 2) worksheet1.set_row(5, nil, nil, 0, 1) worksheet1.set_row(6, nil, nil, 0, 2) worksheet1.set_row(7, nil, nil, 0, 2) worksheet1.set_row(8, nil, nil, 0, 2) worksheet1.set_row(9, nil, nil, 0, 2) worksheet1.set_row(10, nil, nil, 0, 1) # Write the sub-total data that is common to the row examples. create_sub_totals(worksheet1, bold) ############################################################################### # # Example 2: Create a worksheet with collapsed outlined rows. # This is the same as the example 1 except that the all rows are collapsed. # Note: We need to indicate the row that contains the collapsed symbol '+' with # the optional parameter, collapsed. worksheet2.set_row(1, nil, nil, 1, 2) worksheet2.set_row(2, nil, nil, 1, 2) worksheet2.set_row(3, nil, nil, 1, 2) worksheet2.set_row(4, nil, nil, 1, 2) worksheet2.set_row(5, nil, nil, 1, 1) worksheet2.set_row(6, nil, nil, 1, 2) worksheet2.set_row(7, nil, nil, 1, 2) worksheet2.set_row(8, nil, nil, 1, 2) worksheet2.set_row(9, nil, nil, 1, 2) worksheet2.set_row(10, nil, nil, 1, 1) worksheet2.set_row(11, nil, nil, 0, 0, 1) # Write the sub-total data that is common to the row examples. create_sub_totals(worksheet2, bold) ############################################################################### # # Example 3: Create a worksheet with collapsed outlined rows. # Same as the example 1 except that the two sub-totals are collapsed. worksheet3.set_row(1, nil, nil, 1, 2) worksheet3.set_row(2, nil, nil, 1, 2) worksheet3.set_row(3, nil, nil, 1, 2) worksheet3.set_row(4, nil, nil, 1, 2) worksheet3.set_row(5, nil, nil, 0, 1, 1) worksheet3.set_row(6, nil, nil, 1, 2) worksheet3.set_row(7, nil, nil, 1, 2) worksheet3.set_row(8, nil, nil, 1, 2) worksheet3.set_row(9, nil, nil, 1, 2) worksheet3.set_row(10, nil, nil, 0, 1, 1) # Write the sub-total data that is common to the row examples. create_sub_totals(worksheet3, bold) ############################################################################### # # Example 4: Create a worksheet with outlined rows. # Same as the example 1 except that the two sub-totals are collapsed. worksheet4.set_row(1, nil, nil, 1, 2) worksheet4.set_row(2, nil, nil, 1, 2) worksheet4.set_row(3, nil, nil, 1, 2) worksheet4.set_row(4, nil, nil, 1, 2) worksheet4.set_row(5, nil, nil, 1, 1, 1) worksheet4.set_row(6, nil, nil, 1, 2) worksheet4.set_row(7, nil, nil, 1, 2) worksheet4.set_row(8, nil, nil, 1, 2) worksheet4.set_row(9, nil, nil, 1, 2) worksheet4.set_row(10, nil, nil, 1, 1, 1) worksheet4.set_row(11, nil, nil, 0, 0, 1) # Write the sub-total data that is common to the row examples. create_sub_totals(worksheet4, bold) ############################################################################### # # Example 5: Create a worksheet with outlined columns. # data = [ ['Month', 'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',' Total'], ['North', 50, 20, 15, 25, 65, 80, '=SUM(B2:G2)'], ['South', 10, 20, 30, 50, 50, 50, '=SUM(B3:G3)'], ['East', 45, 75, 50, 15, 75, 100, '=SUM(B4:G4)'], ['West', 15, 15, 55, 35, 20, 50, '=SUM(B5:G6)'] ] # Add bold format to the first row worksheet5.set_row(0, nil, bold) # Syntax: set_column(col1, col2, width, XF, hidden, level, collapsed) worksheet5.set_column('A:A', 10, bold ) worksheet5.set_column('B:G', 5, nil, 0, 1) worksheet5.set_column('H:H', 10 ) # Write the data and a formula worksheet5.write_col('A1', data) worksheet5.write('H6', '=SUM(H2:H5)', bold) ############################################################################### # # Example 6: Create a worksheet with collapsed outlined columns. # This is the same as the previous example except collapsed columns. # Add bold format to the first row worksheet6.set_row(0, nil, bold) # Syntax: set_column(col1, col2, width, XF, hidden, level, collapsed) worksheet6.set_column('A:A', 10, bold ) worksheet6.set_column('B:G', 5, nil, 1, 1 ) worksheet6.set_column('H:H', 10, nil, 0, 0, 1) # Write the data and a formula worksheet6.write_col('A1', data) worksheet6.write('H6', '=SUM(H2:H5)', bold) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/outline_collapsed.xls", @file) end def test_panes workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet('Panes 1') worksheet2 = workbook.add_worksheet('Panes 2') worksheet3 = workbook.add_worksheet('Panes 3') worksheet4 = workbook.add_worksheet('Panes 4') # Freeze panes worksheet1.freeze_panes(1, 0) # 1 row worksheet2.freeze_panes(0, 1) # 1 column worksheet3.freeze_panes(1, 1) # 1 row and column # Split panes. # The divisions must be specified in terms of row and column dimensions. # The default row height is 12.75 and the default column width is 8.43 # worksheet4.split_panes(12.75, 8.43, 1, 1) # 1 row and column ####################################################################### # # Set up some formatting and text to highlight the panes # header = workbook.add_format header.set_color('white') header.set_align('center') header.set_align('vcenter') header.set_pattern header.set_fg_color('green') center = workbook.add_format center.set_align('center') ####################################################################### # # Sheet 1 # worksheet1.set_column('A:I', 16) worksheet1.set_row(0, 20) worksheet1.set_selection('C3') (0..8).each { |i| worksheet1.write(0, i, 'Scroll down', header) } (1..100).each do |i| (0..8).each { |j| worksheet1.write(i, j, i + 1, center) } end ####################################################################### # # Sheet 2 # worksheet2.set_column('A:A', 16) worksheet2.set_selection('C3') (0..49).each do |i| worksheet2.set_row(i, 15) worksheet2.write(i, 0, 'Scroll right', header) end (0..49).each do |i| (1..25).each { |j| worksheet2.write(i, j, j, center) } end ####################################################################### # # Sheet 3 # worksheet3.set_column('A:Z', 16) worksheet3.set_selection('C3') (1..25).each { |i| worksheet3.write(0, i, 'Scroll down', header) } (1..49).each { |i| worksheet3.write(i, 0, 'Scroll right', header) } (1..49).each do |i| (1..25).each { |j| worksheet3.write(i, j, j, center) } end ####################################################################### # # Sheet 4 # worksheet4.set_selection('C3') (1..25).each { |i| worksheet4.write(0, i, 'Scroll', center) } (1..49).each { |i| worksheet4.write(i, 0, 'Scroll', center) } (1..49).each do |i| (1..25).each { |j| worksheet4.write(i, j, j, center) } end workbook.close # do assertion compare_file("#{PERL_OUTDIR}/panes.xls", @file) end def test_right_to_left workbook = WriteExcel.new(@file) worksheet1 = workbook.add_worksheet worksheet2 = workbook.add_worksheet worksheet2.right_to_left worksheet1.write(0, 0, 'Hello') # A1, B1, C1, ... worksheet2.write(0, 0, 'Hello') # ..., C1, B1, A1 workbook.close # do assertion compare_file("#{PERL_OUTDIR}/right_to_left.xls", @file) end def test_utf8 workbook = WriteExcel.new(@file) worksheet = workbook.add_worksheet('シート１') format = workbook.add_format(:font => 'ＭＳ 明朝') worksheet.set_footer('フッター') worksheet.set_header('ヘッダー') worksheet.write('A1', 'ＵＴＦ８文字列', format) worksheet.write('A2', '=CONCATENATE(A1,"の連結")', format) workbook.close # do assertion compare_file("#{PERL_OUTDIR}/utf8.xls", @file) end end