---
- name: Bit Size
  required: true
  description: Bit size of this parameter. Zero or Negative values may be used
    to indicate that a string fills the packet up to the offset from the end of
    the packet specified by this value. If Bit Offset is 0 and Bit Size is 0 then
    this is a derived parameter and the Data Type must be set to 'DERIVED'.
  values: \d+
- name: Data Type
  required: true
  description: Data Type of this parameter
  values:
    INT:
      parameters: &params
        - name: Minimum Value
          required: true
          description: Minimum allowed value for this parameter
          values: .*
        - name: Maximum Value
          required: true
          description: Maximum allowed value for this parameter
          values: .*
        - name: ID Value
          required: true
          description: Identification value for this parameter. The binary data must
            match this value for the buffer to be identified as this packet.
          values: .*
        - name: Description
          required: false
          description: Description for this parameter which must be enclosed with quotes
          values: "['\"].*['\"]"
        - name: Endianness
          required: false
          description: Indicates if the data in this command is to be sent in Big Endian or Little Endian format.
            See guide on <a href="https://openc3.com/docs/v5/little-endian-bitfields">Little Endian Bitfields</a>.
          values: <%= %w(BIG_ENDIAN LITTLE_ENDIAN) %>
    UINT:
      parameters: *params
    FLOAT:
      parameters: *params
    DERIVED:
      parameters: *params
    STRING:
      parameters: &sparams
        - name: Default Value
          required: true
          description: Default value for this parameter. You must provide a default
            but if you mark the parameter REQUIRED then scripts will be forced to specify a value.
          values: .*
        - name: Description
          required: false
          description: Description for this parameter which must be enclosed with quotes
          values: "['\"].*['\"]"
        - name: Endianness
          required: false
          description: Indicates if the data in this command is to be sent in Big Endian or Little Endian format
          values: <%= %w(BIG_ENDIAN LITTLE_ENDIAN) %>
    BLOCK:
      parameters: *sparams