begin require 'psych' rescue LoadError end require 'yaml' require 'set' require 'thread' require 'active_support/benchmarkable' require 'active_support/dependencies' require 'active_support/descendants_tracker' require 'active_support/time' require 'active_support/core_ext/class/attribute' require 'active_support/core_ext/class/attribute_accessors' require 'active_support/core_ext/class/delegating_attributes' require 'active_support/core_ext/class/attribute' require 'active_support/core_ext/array/extract_options' require 'active_support/core_ext/hash/deep_merge' require 'active_support/core_ext/hash/indifferent_access' require 'active_support/core_ext/hash/slice' require 'active_support/core_ext/string/behavior' require 'active_support/core_ext/kernel/singleton_class' require 'active_support/core_ext/module/delegation' require 'active_support/core_ext/module/introspection' require 'active_support/core_ext/object/duplicable' require 'active_support/core_ext/object/blank' require 'active_support/deprecation' require 'arel' require 'active_record/errors' require 'active_record/log_subscriber' require 'active_record/explain_subscriber' module ActiveRecord #:nodoc: # = Active Record # # Active Record objects don't specify their attributes directly, but rather infer them from # the table definition with which they're linked. Adding, removing, and changing attributes # and their type is done directly in the database. Any change is instantly reflected in the # Active Record objects. The mapping that binds a given Active Record class to a certain # database table will happen automatically in most common cases, but can be overwritten for the uncommon ones. # # See the mapping rules in table_name and the full example in link:files/activerecord/README_rdoc.html for more insight. # # == Creation # # Active Records accept constructor parameters either in a hash or as a block. The hash # method is especially useful when you're receiving the data from somewhere else, like an # HTTP request. It works like this: # # user = User.new(:name => "David", :occupation => "Code Artist") # user.name # => "David" # # You can also use block initialization: # # user = User.new do |u| # u.name = "David" # u.occupation = "Code Artist" # end # # And of course you can just create a bare object and specify the attributes after the fact: # # user = User.new # user.name = "David" # user.occupation = "Code Artist" # # == Conditions # # Conditions can either be specified as a string, array, or hash representing the WHERE-part of an SQL statement. # The array form is to be used when the condition input is tainted and requires sanitization. The string form can # be used for statements that don't involve tainted data. The hash form works much like the array form, except # only equality and range is possible. Examples: # # class User < ActiveRecord::Base # def self.authenticate_unsafely(user_name, password) # where("user_name = '#{user_name}' AND password = '#{password}'").first # end # # def self.authenticate_safely(user_name, password) # where("user_name = ? AND password = ?", user_name, password).first # end # # def self.authenticate_safely_simply(user_name, password) # where(:user_name => user_name, :password => password).first # end # end # # The authenticate_unsafely method inserts the parameters directly into the query # and is thus susceptible to SQL-injection attacks if the user_name and +password+ # parameters come directly from an HTTP request. The authenticate_safely and # authenticate_safely_simply both will sanitize the user_name and +password+ # before inserting them in the query, which will ensure that an attacker can't escape the # query and fake the login (or worse). # # When using multiple parameters in the conditions, it can easily become hard to read exactly # what the fourth or fifth question mark is supposed to represent. In those cases, you can # resort to named bind variables instead. That's done by replacing the question marks with # symbols and supplying a hash with values for the matching symbol keys: # # Company.where( # "id = :id AND name = :name AND division = :division AND created_at > :accounting_date", # { :id => 3, :name => "37signals", :division => "First", :accounting_date => '2005-01-01' } # ).first # # Similarly, a simple hash without a statement will generate conditions based on equality with the SQL AND # operator. For instance: # # Student.where(:first_name => "Harvey", :status => 1) # Student.where(params[:student]) # # A range may be used in the hash to use the SQL BETWEEN operator: # # Student.where(:grade => 9..12) # # An array may be used in the hash to use the SQL IN operator: # # Student.where(:grade => [9,11,12]) # # When joining tables, nested hashes or keys written in the form 'table_name.column_name' # can be used to qualify the table name of a particular condition. For instance: # # Student.joins(:schools).where(:schools => { :category => 'public' }) # Student.joins(:schools).where('schools.category' => 'public' ) # # == Overwriting default accessors # # All column values are automatically available through basic accessors on the Active Record # object, but sometimes you want to specialize this behavior. This can be done by overwriting # the default accessors (using the same name as the attribute) and calling # read_attribute(attr_name) and write_attribute(attr_name, value) to actually # change things. # # class Song < ActiveRecord::Base # # Uses an integer of seconds to hold the length of the song # # def length=(minutes) # write_attribute(:length, minutes.to_i * 60) # end # # def length # read_attribute(:length) / 60 # end # end # # You can alternatively use self[:attribute]=(value) and self[:attribute] # instead of write_attribute(:attribute, value) and read_attribute(:attribute). # # == Attribute query methods # # In addition to the basic accessors, query methods are also automatically available on the Active Record object. # Query methods allow you to test whether an attribute value is present. # # For example, an Active Record User with the name attribute has a name? method that you can call # to determine whether the user has a name: # # user = User.new(:name => "David") # user.name? # => true # # anonymous = User.new(:name => "") # anonymous.name? # => false # # == Accessing attributes before they have been typecasted # # Sometimes you want to be able to read the raw attribute data without having the column-determined # typecast run its course first. That can be done by using the _before_type_cast # accessors that all attributes have. For example, if your Account model has a balance attribute, # you can call account.balance_before_type_cast or account.id_before_type_cast. # # This is especially useful in validation situations where the user might supply a string for an # integer field and you want to display the original string back in an error message. Accessing the # attribute normally would typecast the string to 0, which isn't what you want. # # == Dynamic attribute-based finders # # Dynamic attribute-based finders are a cleaner way of getting (and/or creating) objects # by simple queries without turning to SQL. They work by appending the name of an attribute # to find_by_, find_last_by_, or find_all_by_ and thus produces finders # like Person.find_by_user_name, Person.find_all_by_last_name, and # Payment.find_by_transaction_id. Instead of writing # Person.where(:user_name => user_name).first, you just do Person.find_by_user_name(user_name). # And instead of writing Person.where(:last_name => last_name).all, you just do # Person.find_all_by_last_name(last_name). # # It's possible to add an exclamation point (!) on the end of the dynamic finders to get them to raise an # ActiveRecord::RecordNotFound error if they do not return any records, # like Person.find_by_last_name!. # # It's also possible to use multiple attributes in the same find by separating them with "_and_". # # Person.where(:user_name => user_name, :password => password).first # Person.find_by_user_name_and_password(user_name, password) # with dynamic finder # # It's even possible to call these dynamic finder methods on relations and named scopes. # # Payment.order("created_on").find_all_by_amount(50) # Payment.pending.find_last_by_amount(100) # # The same dynamic finder style can be used to create the object if it doesn't already exist. # This dynamic finder is called with find_or_create_by_ and will return the object if # it already exists and otherwise creates it, then returns it. Protected attributes won't be set # unless they are given in a block. # # # No 'Summer' tag exists # Tag.find_or_create_by_name("Summer") # equal to Tag.create(:name => "Summer") # # # Now the 'Summer' tag does exist # Tag.find_or_create_by_name("Summer") # equal to Tag.find_by_name("Summer") # # # Now 'Bob' exist and is an 'admin' # User.find_or_create_by_name('Bob', :age => 40) { |u| u.admin = true } # # Adding an exclamation point (!) on to the end of find_or_create_by_ will # raise an ActiveRecord::RecordInvalid error if the new record is invalid. # # Use the find_or_initialize_by_ finder if you want to return a new record without # saving it first. Protected attributes won't be set unless they are given in a block. # # # No 'Winter' tag exists # winter = Tag.find_or_initialize_by_name("Winter") # winter.persisted? # false # # To find by a subset of the attributes to be used for instantiating a new object, pass a hash instead of # a list of parameters. # # Tag.find_or_create_by_name(:name => "rails", :creator => current_user) # # That will either find an existing tag named "rails", or create a new one while setting the # user that created it. # # Just like find_by_*, you can also use scoped_by_* to retrieve data. The good thing about # using this feature is that the very first time result is returned using method_missing technique # but after that the method is declared on the class. Henceforth method_missing will not be hit. # # User.scoped_by_user_name('David') # # == Saving arrays, hashes, and other non-mappable objects in text columns # # Active Record can serialize any object in text columns using YAML. To do so, you must # specify this with a call to the class method +serialize+. # This makes it possible to store arrays, hashes, and other non-mappable objects without doing # any additional work. # # class User < ActiveRecord::Base # serialize :preferences # end # # user = User.create(:preferences => { "background" => "black", "display" => large }) # User.find(user.id).preferences # => { "background" => "black", "display" => large } # # You can also specify a class option as the second parameter that'll raise an exception # if a serialized object is retrieved as a descendant of a class not in the hierarchy. # # class User < ActiveRecord::Base # serialize :preferences, Hash # end # # user = User.create(:preferences => %w( one two three )) # User.find(user.id).preferences # raises SerializationTypeMismatch # # When you specify a class option, the default value for that attribute will be a new # instance of that class. # # class User < ActiveRecord::Base # serialize :preferences, OpenStruct # end # # user = User.new # user.preferences.theme_color = "red" # # # == Single table inheritance # # Active Record allows inheritance by storing the name of the class in a column that by # default is named "type" (can be changed by overwriting Base.inheritance_column). # This means that an inheritance looking like this: # # class Company < ActiveRecord::Base; end # class Firm < Company; end # class Client < Company; end # class PriorityClient < Client; end # # When you do Firm.create(:name => "37signals"), this record will be saved in # the companies table with type = "Firm". You can then fetch this row again using # Company.where(:name => '37signals').first and it will return a Firm object. # # If you don't have a type column defined in your table, single-table inheritance won't # be triggered. In that case, it'll work just like normal subclasses with no special magic # for differentiating between them or reloading the right type with find. # # Note, all the attributes for all the cases are kept in the same table. Read more: # http://www.martinfowler.com/eaaCatalog/singleTableInheritance.html # # == Connection to multiple databases in different models # # Connections are usually created through ActiveRecord::Base.establish_connection and retrieved # by ActiveRecord::Base.connection. All classes inheriting from ActiveRecord::Base will use this # connection. But you can also set a class-specific connection. For example, if Course is an # ActiveRecord::Base, but resides in a different database, you can just say Course.establish_connection # and Course and all of its subclasses will use this connection instead. # # This feature is implemented by keeping a connection pool in ActiveRecord::Base that is # a Hash indexed by the class. If a connection is requested, the retrieve_connection method # will go up the class-hierarchy until a connection is found in the connection pool. # # == Exceptions # # * ActiveRecordError - Generic error class and superclass of all other errors raised by Active Record. # * AdapterNotSpecified - The configuration hash used in establish_connection didn't include an # :adapter key. # * AdapterNotFound - The :adapter key used in establish_connection specified a # non-existent adapter # (or a bad spelling of an existing one). # * AssociationTypeMismatch - The object assigned to the association wasn't of the type # specified in the association definition. # * SerializationTypeMismatch - The serialized object wasn't of the class specified as the second parameter. # * ConnectionNotEstablished+ - No connection has been established. Use establish_connection # before querying. # * RecordNotFound - No record responded to the +find+ method. Either the row with the given ID doesn't exist # or the row didn't meet the additional restrictions. Some +find+ calls do not raise this exception to signal # nothing was found, please check its documentation for further details. # * StatementInvalid - The database server rejected the SQL statement. The precise error is added in the message. # * MultiparameterAssignmentErrors - Collection of errors that occurred during a mass assignment using the # attributes= method. The +errors+ property of this exception contains an array of # AttributeAssignmentError # objects that should be inspected to determine which attributes triggered the errors. # * AttributeAssignmentError - An error occurred while doing a mass assignment through the # attributes= method. # You can inspect the +attribute+ property of the exception object to determine which attribute # triggered the error. # # *Note*: The attributes listed are class-level attributes (accessible from both the class and instance level). # So it's possible to assign a logger to the class through Base.logger= which will then be used by all # instances in the current object space. class Base ## # :singleton-method: # Accepts a logger conforming to the interface of Log4r or the default Ruby 1.8+ Logger class, # which is then passed on to any new database connections made and which can be retrieved on both # a class and instance level by calling +logger+. cattr_accessor :logger, :instance_writer => false ## # :singleton-method: # Contains the database configuration - as is typically stored in config/database.yml - # as a Hash. # # For example, the following database.yml... # # development: # adapter: sqlite3 # database: db/development.sqlite3 # # production: # adapter: sqlite3 # database: db/production.sqlite3 # # ...would result in ActiveRecord::Base.configurations to look like this: # # { # 'development' => { # 'adapter' => 'sqlite3', # 'database' => 'db/development.sqlite3' # }, # 'production' => { # 'adapter' => 'sqlite3', # 'database' => 'db/production.sqlite3' # } # } cattr_accessor :configurations, :instance_writer => false @@configurations = {} ## # :singleton-method: # Determines whether to use Time.local (using :local) or Time.utc (using :utc) when pulling # dates and times from the database. This is set to :local by default. cattr_accessor :default_timezone, :instance_writer => false @@default_timezone = :local ## # :singleton-method: # Specifies the format to use when dumping the database schema with Rails' # Rakefile. If :sql, the schema is dumped as (potentially database- # specific) SQL statements. If :ruby, the schema is dumped as an # ActiveRecord::Schema file which can be loaded into any database that # supports migrations. Use :ruby if you want to have different database # adapters for, e.g., your development and test environments. cattr_accessor :schema_format , :instance_writer => false @@schema_format = :ruby ## # :singleton-method: # Specify whether or not to use timestamps for migration versions cattr_accessor :timestamped_migrations , :instance_writer => false @@timestamped_migrations = true class << self # Class methods def inherited(child_class) #:nodoc: child_class.initialize_generated_modules super end def initialize_generated_modules #:nodoc: @attribute_methods_mutex = Mutex.new # force attribute methods to be higher in inheritance hierarchy than other generated methods generated_attribute_methods generated_feature_methods end def generated_feature_methods @generated_feature_methods ||= begin mod = const_set(:GeneratedFeatureMethods, Module.new) include mod mod end end # Returns a string like 'Post(id:integer, title:string, body:text)' def inspect if self == Base super elsif abstract_class? "#{super}(abstract)" elsif table_exists? attr_list = columns.map { |c| "#{c.name}: #{c.type}" } * ', ' "#{super}(#{attr_list})" else "#{super}(Table doesn't exist)" end end # Overwrite the default class equality method to provide support for association proxies. def ===(object) object.is_a?(self) end def arel_table @arel_table ||= Arel::Table.new(table_name, arel_engine) end def arel_engine @arel_engine ||= begin if self == ActiveRecord::Base ActiveRecord::Base else connection_handler.retrieve_connection_pool(self) ? self : superclass.arel_engine end end end private def relation #:nodoc: relation ||= Relation.new(self, arel_table) if finder_needs_type_condition? relation.where(type_condition).create_with(inheritance_column.to_sym => sti_name) else relation end end end public # New objects can be instantiated as either empty (pass no construction parameter) or pre-set with # attributes but not yet saved (pass a hash with key names matching the associated table column names). # In both instances, valid attribute keys are determined by the column names of the associated table -- # hence you can't have attributes that aren't part of the table columns. # # +initialize+ respects mass-assignment security and accepts either +:as+ or +:without_protection+ options # in the +options+ parameter. # # ==== Examples # # Instantiates a single new object # User.new(:first_name => 'Jamie') # # # Instantiates a single new object using the :admin mass-assignment security role # User.new({ :first_name => 'Jamie', :is_admin => true }, :as => :admin) # # # Instantiates a single new object bypassing mass-assignment security # User.new({ :first_name => 'Jamie', :is_admin => true }, :without_protection => true) def initialize(attributes = nil, options = {}) @attributes = self.class.initialize_attributes(self.class.column_defaults.dup) @association_cache = {} @aggregation_cache = {} @attributes_cache = {} @new_record = true @readonly = false @destroyed = false @marked_for_destruction = false @previously_changed = {} @changed_attributes = {} ensure_proper_type populate_with_current_scope_attributes assign_attributes(attributes, options) if attributes yield self if block_given? run_callbacks :initialize end # Initialize an empty model object from +coder+. +coder+ must contain # the attributes necessary for initializing an empty model object. For # example: # # class Post < ActiveRecord::Base # end # # post = Post.allocate # post.init_with('attributes' => { 'title' => 'hello world' }) # post.title # => 'hello world' def init_with(coder) @attributes = self.class.initialize_attributes(coder['attributes']) @relation = nil @attributes_cache, @previously_changed, @changed_attributes = {}, {}, {} @association_cache = {} @aggregation_cache = {} @readonly = @destroyed = @marked_for_destruction = false @new_record = false run_callbacks :find run_callbacks :initialize self end # Duped objects have no id assigned and are treated as new records. Note # that this is a "shallow" copy as it copies the object's attributes # only, not its associations. The extent of a "deep" copy is application # specific and is therefore left to the application to implement according # to its need. # The dup method does not preserve the timestamps (created|updated)_(at|on). def initialize_dup(other) cloned_attributes = other.clone_attributes(:read_attribute_before_type_cast) self.class.initialize_attributes(cloned_attributes) cloned_attributes.delete(self.class.primary_key) @attributes = cloned_attributes _run_after_initialize_callbacks if respond_to?(:_run_after_initialize_callbacks) @changed_attributes = {} self.class.column_defaults.each do |attr, orig_value| @changed_attributes[attr] = orig_value if field_changed?(attr, orig_value, @attributes[attr]) end @aggregation_cache = {} @association_cache = {} @attributes_cache = {} @new_record = true ensure_proper_type populate_with_current_scope_attributes super end # Backport dup from 1.9 so that initialize_dup() gets called unless Object.respond_to?(:initialize_dup) def dup # :nodoc: copy = super copy.initialize_dup(self) copy end end # Populate +coder+ with attributes about this record that should be # serialized. The structure of +coder+ defined in this method is # guaranteed to match the structure of +coder+ passed to the +init_with+ # method. # # Example: # # class Post < ActiveRecord::Base # end # coder = {} # Post.new.encode_with(coder) # coder # => { 'id' => nil, ... } def encode_with(coder) coder['attributes'] = attributes end # Returns true if +comparison_object+ is the same exact object, or +comparison_object+ # is of the same type and +self+ has an ID and it is equal to +comparison_object.id+. # # Note that new records are different from any other record by definition, unless the # other record is the receiver itself. Besides, if you fetch existing records with # +select+ and leave the ID out, you're on your own, this predicate will return false. # # Note also that destroying a record preserves its ID in the model instance, so deleted # models are still comparable. def ==(comparison_object) super || comparison_object.instance_of?(self.class) && id.present? && comparison_object.id == id end alias :eql? :== # Delegates to id in order to allow two records of the same type and id to work with something like: # [ Person.find(1), Person.find(2), Person.find(3) ] & [ Person.find(1), Person.find(4) ] # => [ Person.find(1) ] def hash id.hash end # Freeze the attributes hash such that associations are still accessible, even on destroyed records. def freeze @attributes.freeze; self end # Returns +true+ if the attributes hash has been frozen. def frozen? @attributes.frozen? end # Allows sort on objects def <=>(other_object) if other_object.is_a?(self.class) self.to_key <=> other_object.to_key else nil end end # Returns +true+ if the record is read only. Records loaded through joins with piggy-back # attributes will be marked as read only since they cannot be saved. def readonly? @readonly end # Marks this record as read only. def readonly! @readonly = true end # Returns the contents of the record as a nicely formatted string. def inspect inspection = if @attributes self.class.column_names.collect { |name| if has_attribute?(name) "#{name}: #{attribute_for_inspect(name)}" end }.compact.join(", ") else "not initialized" end "#<#{self.class} #{inspection}>" end # Hackery to accomodate Syck. Remove for 4.0. def to_yaml(opts = {}) #:nodoc: if YAML.const_defined?(:ENGINE) && !YAML::ENGINE.syck? super else coder = {} encode_with(coder) YAML.quick_emit(self, opts) do |out| out.map(taguri, to_yaml_style) do |map| coder.each { |k, v| map.add(k, v) } end end end end # Hackery to accomodate Syck. Remove for 4.0. def yaml_initialize(tag, coder) #:nodoc: init_with(coder) end private # Under Ruby 1.9, Array#flatten will call #to_ary (recursively) on each of the elements # of the array, and then rescues from the possible NoMethodError. If those elements are # ActiveRecord::Base's, then this triggers the various method_missing's that we have, # which significantly impacts upon performance. # # So we can avoid the method_missing hit by explicitly defining #to_ary as nil here. # # See also http://tenderlovemaking.com/2011/06/28/til-its-ok-to-return-nil-from-to_ary/ def to_ary # :nodoc: nil end include ActiveRecord::Persistence extend ActiveModel::Naming extend QueryCache::ClassMethods extend ActiveSupport::Benchmarkable extend ActiveSupport::DescendantsTracker extend Querying include ReadonlyAttributes include ModelSchema extend Translation include Inheritance include Scoping extend DynamicMatchers include Sanitization include Integration include AttributeAssignment include ActiveModel::Conversion include Validations extend CounterCache include Locking::Optimistic, Locking::Pessimistic include AttributeMethods include Callbacks, ActiveModel::Observing, Timestamp include Associations include IdentityMap include ActiveModel::SecurePassword extend Explain # AutosaveAssociation needs to be included before Transactions, because we want # #save_with_autosave_associations to be wrapped inside a transaction. include AutosaveAssociation, NestedAttributes include Aggregations, Transactions, Reflection, Serialization, Store end end require 'active_record/connection_adapters/abstract/connection_specification' ActiveSupport.run_load_hooks(:active_record, ActiveRecord::Base)