# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Billing
module V20180709
# 按交易类型汇总消费详情
class ActionSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param ActionType: 交易类型编码
# @type ActionType: String
# @param ActionTypeName: 交易类型：如包年包月新购、包年包月续费、按量计费扣费等类型
# @type ActionTypeName: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param BillMonth: 账单月份，格式2019-08
# @type BillMonth: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
attr_accessor :ActionType, :ActionTypeName, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :BillMonth, :TotalCost
def initialize(actiontype=nil, actiontypename=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, billmonth=nil, totalcost=nil)
@ActionType = actiontype
@ActionTypeName = actiontypename
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@BillMonth = billmonth
@TotalCost = totalcost
end
def deserialize(params)
@ActionType = params['ActionType']
@ActionTypeName = params['ActionTypeName']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@BillMonth = params['BillMonth']
@TotalCost = params['TotalCost']
end
end
# 适用商品信息
class ApplicableProducts < TencentCloud::Common::AbstractModel
# @param GoodsName: 适用商品名称，值为“全产品通用”或商品名称组成的string，以","分割。
# @type GoodsName: String
# @param PayMode: postPay后付费/prePay预付费/riPay预留实例/空字符串或者"*"表示全部模式。如GoodsName为多个商品名以","分割组成的string，而PayMode为"*"，表示每一件商品的模式都为"*"。
# @type PayMode: String
attr_accessor :GoodsName, :PayMode
def initialize(goodsname=nil, paymode=nil)
@GoodsName = goodsname
@PayMode = paymode
end
def deserialize(params)
@GoodsName = params['GoodsName']
@PayMode = params['PayMode']
end
end
# 账单明细数据对象
class BillDetail < TencentCloud::Common::AbstractModel
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param ProductCodeName: 子产品名称：用户采购的具体产品细分类型，例如：云服务器 CVM-标准型 S1
# @type ProductCodeName: String
# @param PayModeName: 计费模式：资源的计费模式，区分为包年包月和按量计费
# @type PayModeName: String
# @param ProjectName: 项目名称：资源归属的项目，用户在控制台给资源自主分配项目，未分配则是默认项目
# @type ProjectName: String
# @param RegionName: 地域：资源所属地域，如华南地区（广州）
# @type RegionName: String
# @param ZoneName: 可用区：资源所属可用区，如广州三区
# @type ZoneName: String
# @param ResourceId: 资源 ID：账单中出账对象 ID，不同产品因资源形态不同，资源内容不完全相同，如云服务器 CVM 为对应的实例 ID
# @type ResourceId: String
# @param ResourceName: 资源别名：用户在控制台为资源设置的名称，如果未设置，则默认为空
# @type ResourceName: String
# @param ActionTypeName: 交易类型，如包年包月新购、包年包月续费、按量计费扣费等类型
# @type ActionTypeName: String
# @param OrderId: 订单ID：包年包月计费模式下订购的订单号
# @type OrderId: String
# @param BillId: 交易ID：结算扣费单号
# @type BillId: String
# @param PayTime: 扣费时间：结算扣费时间
# @type PayTime: String
# @param FeeBeginTime: 开始使用时间：产品服务开始使用时间
# @type FeeBeginTime: String
# @param FeeEndTime: 结束使用时间：产品服务结束使用时间
# @type FeeEndTime: String
# @param ComponentSet: 组件列表
# @type ComponentSet: Array
# @param PayerUin: 支付者UIN：支付者的账号 ID，账号 ID 是用户在腾讯云的唯一账号标识
# @type PayerUin: String
# @param OwnerUin: 使用者UIN：实际使用资源的账号 ID
# @type OwnerUin: String
# @param OperateUin: 操作者UIN：操作者账号 ID（预付费资源下单或后付费操作开通资源账号的 ID 或者角色 ID ）
# @type OperateUin: String
# @param Tags: 标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param BusinessCode: 产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessCode: String
# @param ProductCode: 子产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductCode: String
# @param ActionType: 交易类型编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ActionType: String
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param PriceInfo: 价格属性：该组件除单价、时长外的其他影响折扣定价的属性信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PriceInfo: Array
# @param AssociatedOrder: 关联交易单据ID：和本笔交易关联单据 ID，如，冲销订单，记录原订单、重结订单，退费单记录对应的原购买订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssociatedOrder: :class:`Tencentcloud::Billing.v20180709.models.BillDetailAssociatedOrder`
# @param Formula: 计算说明：特殊交易类型计费结算的详细计算说明，如退费及变配
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Formula: String
# @param FormulaUrl: 计费规则：各产品详细的计费规则官网说明链接
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FormulaUrl: String
attr_accessor :BusinessCodeName, :ProductCodeName, :PayModeName, :ProjectName, :RegionName, :ZoneName, :ResourceId, :ResourceName, :ActionTypeName, :OrderId, :BillId, :PayTime, :FeeBeginTime, :FeeEndTime, :ComponentSet, :PayerUin, :OwnerUin, :OperateUin, :Tags, :BusinessCode, :ProductCode, :ActionType, :RegionId, :ProjectId, :PriceInfo, :AssociatedOrder, :Formula, :FormulaUrl
def initialize(businesscodename=nil, productcodename=nil, paymodename=nil, projectname=nil, regionname=nil, zonename=nil, resourceid=nil, resourcename=nil, actiontypename=nil, orderid=nil, billid=nil, paytime=nil, feebegintime=nil, feeendtime=nil, componentset=nil, payeruin=nil, owneruin=nil, operateuin=nil, tags=nil, businesscode=nil, productcode=nil, actiontype=nil, regionid=nil, projectid=nil, priceinfo=nil, associatedorder=nil, formula=nil, formulaurl=nil)
@BusinessCodeName = businesscodename
@ProductCodeName = productcodename
@PayModeName = paymodename
@ProjectName = projectname
@RegionName = regionname
@ZoneName = zonename
@ResourceId = resourceid
@ResourceName = resourcename
@ActionTypeName = actiontypename
@OrderId = orderid
@BillId = billid
@PayTime = paytime
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@ComponentSet = componentset
@PayerUin = payeruin
@OwnerUin = owneruin
@OperateUin = operateuin
@Tags = tags
@BusinessCode = businesscode
@ProductCode = productcode
@ActionType = actiontype
@RegionId = regionid
@ProjectId = projectid
@PriceInfo = priceinfo
@AssociatedOrder = associatedorder
@Formula = formula
@FormulaUrl = formulaurl
end
def deserialize(params)
@BusinessCodeName = params['BusinessCodeName']
@ProductCodeName = params['ProductCodeName']
@PayModeName = params['PayModeName']
@ProjectName = params['ProjectName']
@RegionName = params['RegionName']
@ZoneName = params['ZoneName']
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@ActionTypeName = params['ActionTypeName']
@OrderId = params['OrderId']
@BillId = params['BillId']
@PayTime = params['PayTime']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
unless params['ComponentSet'].nil?
@ComponentSet = []
params['ComponentSet'].each do |i|
billdetailcomponent_tmp = BillDetailComponent.new
billdetailcomponent_tmp.deserialize(i)
@ComponentSet << billdetailcomponent_tmp
end
end
@PayerUin = params['PayerUin']
@OwnerUin = params['OwnerUin']
@OperateUin = params['OperateUin']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
billtaginfo_tmp = BillTagInfo.new
billtaginfo_tmp.deserialize(i)
@Tags << billtaginfo_tmp
end
end
@BusinessCode = params['BusinessCode']
@ProductCode = params['ProductCode']
@ActionType = params['ActionType']
@RegionId = params['RegionId']
@ProjectId = params['ProjectId']
@PriceInfo = params['PriceInfo']
unless params['AssociatedOrder'].nil?
@AssociatedOrder = BillDetailAssociatedOrder.new
@AssociatedOrder.deserialize(params['AssociatedOrder'])
end
@Formula = params['Formula']
@FormulaUrl = params['FormulaUrl']
end
end
# 明细账单关联单据信息
class BillDetailAssociatedOrder < TencentCloud::Common::AbstractModel
# @param PrepayPurchase: 新购订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrepayPurchase: String
# @param PrepayRenew: 续费订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrepayRenew: String
# @param PrepayModifyUp: 升配订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrepayModifyUp: String
# @param ReverseOrder: 冲销订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReverseOrder: String
# @param NewOrder: 优惠调整后订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NewOrder: String
# @param Original: 优惠调整前订单
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Original: String
attr_accessor :PrepayPurchase, :PrepayRenew, :PrepayModifyUp, :ReverseOrder, :NewOrder, :Original
def initialize(prepaypurchase=nil, prepayrenew=nil, prepaymodifyup=nil, reverseorder=nil, neworder=nil, original=nil)
@PrepayPurchase = prepaypurchase
@PrepayRenew = prepayrenew
@PrepayModifyUp = prepaymodifyup
@ReverseOrder = reverseorder
@NewOrder = neworder
@Original = original
end
def deserialize(params)
@PrepayPurchase = params['PrepayPurchase']
@PrepayRenew = params['PrepayRenew']
@PrepayModifyUp = params['PrepayModifyUp']
@ReverseOrder = params['ReverseOrder']
@NewOrder = params['NewOrder']
@Original = params['Original']
end
end
# 账单明细组件对象
class BillDetailComponent < TencentCloud::Common::AbstractModel
# @param ComponentCodeName: 组件类型：用户购买的产品或服务对应的组件大类，例如：云服务器 CVM 的组件：CPU、内存等
# @type ComponentCodeName: String
# @param ItemCodeName: 组件名称：用户购买的产品或服务，所包含的具体组件
# @type ItemCodeName: String
# @param SinglePrice: 组件刊例价：组件的官网原始单价（如果客户享受一口价/合同价则默认不展示）
# @type SinglePrice: String
# @param SpecifiedPrice: 组件指定价（已废弃）
# @type SpecifiedPrice: String
# @param PriceUnit: 组件价格单位：组件价格的单位，单位构成：元/用量单位/时长单位
# @type PriceUnit: String
# @param UsedAmount: 组件用量：该组件实际结算用量，组件用量 = 组件原始用量 - 抵扣用量（含资源包
# @type UsedAmount: String
# @param UsedAmountUnit: 组件用量单位：组件用量对应的单位
# @type UsedAmountUnit: String
# @param RealTotalMeasure: 原始用量/时长：组件被资源包抵扣前的原始用量/时长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealTotalMeasure: String
# @param DeductedMeasure: 抵扣用量/时长（含资源包）：组件被资源包抵扣的用量/时长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeductedMeasure: String
# @param TimeSpan: 使用时长：资源使用的时长
# @type TimeSpan: String
# @param TimeUnitName: 时长单位：资源使用时长的单位
# @type TimeUnitName: String
# @param Cost: 组件原价：原价 = 组件刊例价 * 组件用量 * 使用时长（如果客户享受一口价/合同价则默认不展示，退费类场景也默认不展示）
# @type Cost: String
# @param Discount: 折扣率：本资源享受的折扣率（如果客户享受一口价/合同价则默认不展示，退费场景也默认不展示）
# @type Discount: String
# @param ReduceType: 优惠类型
# @type ReduceType: String
# @param RealCost: 优惠后总价：优惠后总价=（原价 - 预留实例抵扣原价 - 节省计划抵扣原价）* 折扣率
# @type RealCost: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param ItemCode: 组件类型编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ItemCode: String
# @param ComponentCode: 组件名称编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ComponentCode: String
# @param ContractPrice: 组件单价：组件的折后单价，组件单价 = 刊例价 * 折扣
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContractPrice: String
# @param InstanceType: 实例类型：购买的产品服务对应的实例类型，包括资源包、RI、SP、竞价实例。正常的实例展示默认为不展示
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceType: String
# @param RiTimeSpan: 预留实例抵扣的使用时长：本产品或服务使用预留实例抵扣的使用时长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiTimeSpan: String
# @param OriginalCostWithRI: 预留实例抵扣组件原价：本产品或服务使用预留实例抵扣的组件原价金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OriginalCostWithRI: String
# @param SPDeductionRate: 节省计划抵扣率：节省计划可用余额额度范围内，节省计划对于此组件打的折扣率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SPDeductionRate: String
# @param SPDeduction: 节省计划抵扣金额（已废弃）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SPDeduction: String
# @param OriginalCostWithSP: 节省计划抵扣组件原价：节省计划抵扣原价=节省计划包抵扣金额/节省计划抵扣率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OriginalCostWithSP: String
# @param BlendedDiscount: 混合折扣率：综合各类折扣抵扣信息后的最终折扣率，混合折扣率 = 优惠后总价 / 组件原价
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BlendedDiscount: String
# @param ComponentConfig: 配置描述：资源配置规格信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ComponentConfig: Array
attr_accessor :ComponentCodeName, :ItemCodeName, :SinglePrice, :SpecifiedPrice, :PriceUnit, :UsedAmount, :UsedAmountUnit, :RealTotalMeasure, :DeductedMeasure, :TimeSpan, :TimeUnitName, :Cost, :Discount, :ReduceType, :RealCost, :VoucherPayAmount, :CashPayAmount, :IncentivePayAmount, :TransferPayAmount, :ItemCode, :ComponentCode, :ContractPrice, :InstanceType, :RiTimeSpan, :OriginalCostWithRI, :SPDeductionRate, :SPDeduction, :OriginalCostWithSP, :BlendedDiscount, :ComponentConfig
extend Gem::Deprecate
deprecate :SpecifiedPrice, :none, 2023, 11
deprecate :SpecifiedPrice=, :none, 2023, 11
deprecate :SPDeduction, :none, 2023, 11
deprecate :SPDeduction=, :none, 2023, 11
def initialize(componentcodename=nil, itemcodename=nil, singleprice=nil, specifiedprice=nil, priceunit=nil, usedamount=nil, usedamountunit=nil, realtotalmeasure=nil, deductedmeasure=nil, timespan=nil, timeunitname=nil, cost=nil, discount=nil, reducetype=nil, realcost=nil, voucherpayamount=nil, cashpayamount=nil, incentivepayamount=nil, transferpayamount=nil, itemcode=nil, componentcode=nil, contractprice=nil, instancetype=nil, ritimespan=nil, originalcostwithri=nil, spdeductionrate=nil, spdeduction=nil, originalcostwithsp=nil, blendeddiscount=nil, componentconfig=nil)
@ComponentCodeName = componentcodename
@ItemCodeName = itemcodename
@SinglePrice = singleprice
@SpecifiedPrice = specifiedprice
@PriceUnit = priceunit
@UsedAmount = usedamount
@UsedAmountUnit = usedamountunit
@RealTotalMeasure = realtotalmeasure
@DeductedMeasure = deductedmeasure
@TimeSpan = timespan
@TimeUnitName = timeunitname
@Cost = cost
@Discount = discount
@ReduceType = reducetype
@RealCost = realcost
@VoucherPayAmount = voucherpayamount
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@TransferPayAmount = transferpayamount
@ItemCode = itemcode
@ComponentCode = componentcode
@ContractPrice = contractprice
@InstanceType = instancetype
@RiTimeSpan = ritimespan
@OriginalCostWithRI = originalcostwithri
@SPDeductionRate = spdeductionrate
@SPDeduction = spdeduction
@OriginalCostWithSP = originalcostwithsp
@BlendedDiscount = blendeddiscount
@ComponentConfig = componentconfig
end
def deserialize(params)
@ComponentCodeName = params['ComponentCodeName']
@ItemCodeName = params['ItemCodeName']
@SinglePrice = params['SinglePrice']
@SpecifiedPrice = params['SpecifiedPrice']
@PriceUnit = params['PriceUnit']
@UsedAmount = params['UsedAmount']
@UsedAmountUnit = params['UsedAmountUnit']
@RealTotalMeasure = params['RealTotalMeasure']
@DeductedMeasure = params['DeductedMeasure']
@TimeSpan = params['TimeSpan']
@TimeUnitName = params['TimeUnitName']
@Cost = params['Cost']
@Discount = params['Discount']
@ReduceType = params['ReduceType']
@RealCost = params['RealCost']
@VoucherPayAmount = params['VoucherPayAmount']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@TransferPayAmount = params['TransferPayAmount']
@ItemCode = params['ItemCode']
@ComponentCode = params['ComponentCode']
@ContractPrice = params['ContractPrice']
@InstanceType = params['InstanceType']
@RiTimeSpan = params['RiTimeSpan']
@OriginalCostWithRI = params['OriginalCostWithRI']
@SPDeductionRate = params['SPDeductionRate']
@SPDeduction = params['SPDeduction']
@OriginalCostWithSP = params['OriginalCostWithSP']
@BlendedDiscount = params['BlendedDiscount']
unless params['ComponentConfig'].nil?
@ComponentConfig = []
params['ComponentConfig'].each do |i|
billdetailcomponentconfig_tmp = BillDetailComponentConfig.new
billdetailcomponentconfig_tmp.deserialize(i)
@ComponentConfig << billdetailcomponentconfig_tmp
end
end
end
end
# 明细账单配置描述结构
class BillDetailComponentConfig < TencentCloud::Common::AbstractModel
# @param Name: 配置描述名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Value: 配置描述值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 经销账单资源汇总数据对象
class BillDistributionResourceSummary < TencentCloud::Common::AbstractModel
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param ProductCodeName: 子产品名称：用户采购的具体产品细分类型，例如：云服务器 CVM-标准型 S1
# @type ProductCodeName: String
# @param PayModeName: 计费模式：资源的计费模式，区分为包年包月和按量计费
# @type PayModeName: String
# @param ProjectName: 项目名称：资源归属的项目，用户在控制台给资源自主分配项目，未分配则是默认项目
# @type ProjectName: String
# @param RegionName: 地域：资源所属地域，如华南地区（广州）
# @type RegionName: String
# @param ZoneName: 可用区：资源所属可用区，如广州三区
# @type ZoneName: String
# @param ResourceId: 资源 ID：账单中出账对象 ID，不同产品因资源形态不同，资源内容不完全相同，如云服务器 CVM 为对应的实例 ID
# @type ResourceId: String
# @param ResourceName: 资源别名：用户在控制台为资源设置的名称，如果未设置，则默认为空
# @type ResourceName: String
# @param ActionTypeName: 交易类型：如包年包月新购、包年包月续费、按量计费扣费等类型
# @type ActionTypeName: String
# @param OrderId: 订单ID：包年包月计费模式下订购的订单号
# @type OrderId: String
# @param PayTime: 扣费时间：结算扣费时间
# @type PayTime: String
# @param FeeBeginTime: 开始使用时间：产品服务开始使用时间
# @type FeeBeginTime: String
# @param FeeEndTime: 结束使用时间：产品服务结束使用时间
# @type FeeEndTime: String
# @param ConfigDesc: 配置描述：该资源下的计费项名称和用量合并展示，仅在资源账单体现
# @type ConfigDesc: String
# @param ExtendField1: 扩展字段1：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField1: String
# @param ExtendField2: 扩展字段2：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField2: String
# @param TotalCost: 原价：原价 = 组件刊例价 * 组件用量 * 使用时长（如果客户享受一口价/合同价则默认不展示，退费类场景也默认不展示）
# @type TotalCost: String
# @param Discount: 折扣率：本资源享受的折扣率（如果客户享受一口价/合同价则默认不展示，退费场景也默认不展示）
# @type Discount: String
# @param ReduceType: 优惠类型
# @type ReduceType: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param ExtendField3: 扩展字段3：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField3: String
# @param ExtendField4: 扩展字段4：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField4: String
# @param ExtendField5: 扩展字段5：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField5: String
# @param Tags: 标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param OwnerUin: 使用者UIN：实际使用资源的账号 ID
# @type OwnerUin: String
# @param OperateUin: 操作者UIN：操作者账号 ID（预付费资源下单或后付费操作开通资源账号的 ID 或者角色 ID ）
# @type OperateUin: String
# @param BusinessCode: 产品编码
# @type BusinessCode: String
# @param ProductCode: 子产品编码
# @type ProductCode: String
# @param RegionId: 地域ID
# @type RegionId: Integer
# @param InstanceType: 实例类型：购买的产品服务对应的实例类型，包括资源包、RI、SP、竞价实例。正常的实例展示默认为不展示
# @type InstanceType: String
# @param OriginalCostWithRI: 预留实例抵扣组件原价：本产品或服务使用预留实例抵扣的组件原价金额
# @type OriginalCostWithRI: String
# @param SPDeduction: 节省计划抵扣金额（已废弃）
# @type SPDeduction: String
# @param OriginalCostWithSP: 节省计划抵扣组件原价：节省计划抵扣原价=节省计划包抵扣金额/节省计划抵扣率
# @type OriginalCostWithSP: String
attr_accessor :BusinessCodeName, :ProductCodeName, :PayModeName, :ProjectName, :RegionName, :ZoneName, :ResourceId, :ResourceName, :ActionTypeName, :OrderId, :PayTime, :FeeBeginTime, :FeeEndTime, :ConfigDesc, :ExtendField1, :ExtendField2, :TotalCost, :Discount, :ReduceType, :RealTotalCost, :VoucherPayAmount, :CashPayAmount, :IncentivePayAmount, :TransferPayAmount, :ExtendField3, :ExtendField4, :ExtendField5, :Tags, :OwnerUin, :OperateUin, :BusinessCode, :ProductCode, :RegionId, :InstanceType, :OriginalCostWithRI, :SPDeduction, :OriginalCostWithSP
extend Gem::Deprecate
deprecate :SPDeduction, :none, 2023, 11
deprecate :SPDeduction=, :none, 2023, 11
def initialize(businesscodename=nil, productcodename=nil, paymodename=nil, projectname=nil, regionname=nil, zonename=nil, resourceid=nil, resourcename=nil, actiontypename=nil, orderid=nil, paytime=nil, feebegintime=nil, feeendtime=nil, configdesc=nil, extendfield1=nil, extendfield2=nil, totalcost=nil, discount=nil, reducetype=nil, realtotalcost=nil, voucherpayamount=nil, cashpayamount=nil, incentivepayamount=nil, transferpayamount=nil, extendfield3=nil, extendfield4=nil, extendfield5=nil, tags=nil, owneruin=nil, operateuin=nil, businesscode=nil, productcode=nil, regionid=nil, instancetype=nil, originalcostwithri=nil, spdeduction=nil, originalcostwithsp=nil)
@BusinessCodeName = businesscodename
@ProductCodeName = productcodename
@PayModeName = paymodename
@ProjectName = projectname
@RegionName = regionname
@ZoneName = zonename
@ResourceId = resourceid
@ResourceName = resourcename
@ActionTypeName = actiontypename
@OrderId = orderid
@PayTime = paytime
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@ConfigDesc = configdesc
@ExtendField1 = extendfield1
@ExtendField2 = extendfield2
@TotalCost = totalcost
@Discount = discount
@ReduceType = reducetype
@RealTotalCost = realtotalcost
@VoucherPayAmount = voucherpayamount
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@TransferPayAmount = transferpayamount
@ExtendField3 = extendfield3
@ExtendField4 = extendfield4
@ExtendField5 = extendfield5
@Tags = tags
@OwnerUin = owneruin
@OperateUin = operateuin
@BusinessCode = businesscode
@ProductCode = productcode
@RegionId = regionid
@InstanceType = instancetype
@OriginalCostWithRI = originalcostwithri
@SPDeduction = spdeduction
@OriginalCostWithSP = originalcostwithsp
end
def deserialize(params)
@BusinessCodeName = params['BusinessCodeName']
@ProductCodeName = params['ProductCodeName']
@PayModeName = params['PayModeName']
@ProjectName = params['ProjectName']
@RegionName = params['RegionName']
@ZoneName = params['ZoneName']
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@ActionTypeName = params['ActionTypeName']
@OrderId = params['OrderId']
@PayTime = params['PayTime']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
@ConfigDesc = params['ConfigDesc']
@ExtendField1 = params['ExtendField1']
@ExtendField2 = params['ExtendField2']
@TotalCost = params['TotalCost']
@Discount = params['Discount']
@ReduceType = params['ReduceType']
@RealTotalCost = params['RealTotalCost']
@VoucherPayAmount = params['VoucherPayAmount']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@TransferPayAmount = params['TransferPayAmount']
@ExtendField3 = params['ExtendField3']
@ExtendField4 = params['ExtendField4']
@ExtendField5 = params['ExtendField5']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
billtaginfo_tmp = BillTagInfo.new
billtaginfo_tmp.deserialize(i)
@Tags << billtaginfo_tmp
end
end
@OwnerUin = params['OwnerUin']
@OperateUin = params['OperateUin']
@BusinessCode = params['BusinessCode']
@ProductCode = params['ProductCode']
@RegionId = params['RegionId']
@InstanceType = params['InstanceType']
@OriginalCostWithRI = params['OriginalCostWithRI']
@SPDeduction = params['SPDeduction']
@OriginalCostWithSP = params['OriginalCostWithSP']
end
end
# 账单资源汇总数据对象
class BillResourceSummary < TencentCloud::Common::AbstractModel
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param ProductCodeName: 子产品名称：用户采购的具体产品细分类型，例如：云服务器 CVM-标准型 S1
# @type ProductCodeName: String
# @param PayModeName: 计费模式：资源的计费模式，区分为包年包月和按量计费
# @type PayModeName: String
# @param ProjectName: 项目名称：资源归属的项目，用户在控制台给资源自主分配项目，未分配则是默认项目
# @type ProjectName: String
# @param RegionName: 地域：资源所属地域，如华南地区（广州）
# @type RegionName: String
# @param ZoneName: 可用区：资源所属可用区，如广州三区
# @type ZoneName: String
# @param ResourceId: 资源 ID：账单中出账对象 ID，不同产品因资源形态不同，资源内容不完全相同，如云服务器 CVM 为对应的实例 ID
# @type ResourceId: String
# @param ResourceName: 资源别名：用户在控制台为资源设置的名称，如果未设置，则默认为空
# @type ResourceName: String
# @param ActionTypeName: 交易类型：如包年包月新购、包年包月续费、按量计费扣费等类型
# @type ActionTypeName: String
# @param OrderId: 订单ID：包年包月计费模式下订购的订单号
# @type OrderId: String
# @param PayTime: 扣费时间：结算扣费时间
# @type PayTime: String
# @param FeeBeginTime: 开始使用时间：产品服务开始使用时间
# @type FeeBeginTime: String
# @param FeeEndTime: 结束使用时间：产品服务结束使用时间
# @type FeeEndTime: String
# @param ConfigDesc: 配置描述：该资源下的计费项名称和用量合并展示，仅在资源账单体现
# @type ConfigDesc: String
# @param ExtendField1: 扩展字段1：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField1: String
# @param ExtendField2: 扩展字段2：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField2: String
# @param TotalCost: 原价：原价 = 组件刊例价 * 组件用量 * 使用时长（如果客户享受一口价/合同价则默认不展示，退费类场景也默认不展示）
# @type TotalCost: String
# @param Discount: 折扣率：本资源享受的折扣率（如果客户享受一口价/合同价则默认不展示，退费场景也默认不展示）
# @type Discount: String
# @param ReduceType: 优惠类型
# @type ReduceType: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param ExtendField3: 扩展字段3：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField3: String
# @param ExtendField4: 扩展字段4：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField4: String
# @param ExtendField5: 扩展字段5：产品对应的扩展属性信息，仅在资源账单体现
# @type ExtendField5: String
# @param Tags: 标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param PayerUin: 支付者UIN：支付者的账号 ID，账号 ID 是用户在腾讯云的唯一账号标识
# @type PayerUin: String
# @param OwnerUin: 使用者UIN：实际使用资源的账号 ID
# @type OwnerUin: String
# @param OperateUin: 操作者UIN：操作者账号 ID（预付费资源下单或后付费操作开通资源账号的 ID 或者角色 ID ）
# @type OperateUin: String
# @param BusinessCode: 产品编码
# @type BusinessCode: String
# @param ProductCode: 子产品编码
# @type ProductCode: String
# @param RegionId: 地域ID
# @type RegionId: Integer
# @param InstanceType: 实例类型：购买的产品服务对应的实例类型，包括资源包、RI、SP、竞价实例。正常的实例展示默认为不展示
# @type InstanceType: String
# @param OriginalCostWithRI: 预留实例抵扣组件原价：本产品或服务使用预留实例抵扣的组件原价金额
# @type OriginalCostWithRI: String
# @param SPDeduction: 节省计划抵扣金额（已废弃）
# @type SPDeduction: String
# @param OriginalCostWithSP: 节省计划抵扣组件原价：节省计划抵扣原价=节省计划包抵扣金额/节省计划抵扣率
# @type OriginalCostWithSP: String
attr_accessor :BusinessCodeName, :ProductCodeName, :PayModeName, :ProjectName, :RegionName, :ZoneName, :ResourceId, :ResourceName, :ActionTypeName, :OrderId, :PayTime, :FeeBeginTime, :FeeEndTime, :ConfigDesc, :ExtendField1, :ExtendField2, :TotalCost, :Discount, :ReduceType, :RealTotalCost, :VoucherPayAmount, :CashPayAmount, :IncentivePayAmount, :TransferPayAmount, :ExtendField3, :ExtendField4, :ExtendField5, :Tags, :PayerUin, :OwnerUin, :OperateUin, :BusinessCode, :ProductCode, :RegionId, :InstanceType, :OriginalCostWithRI, :SPDeduction, :OriginalCostWithSP
extend Gem::Deprecate
deprecate :SPDeduction, :none, 2023, 11
deprecate :SPDeduction=, :none, 2023, 11
def initialize(businesscodename=nil, productcodename=nil, paymodename=nil, projectname=nil, regionname=nil, zonename=nil, resourceid=nil, resourcename=nil, actiontypename=nil, orderid=nil, paytime=nil, feebegintime=nil, feeendtime=nil, configdesc=nil, extendfield1=nil, extendfield2=nil, totalcost=nil, discount=nil, reducetype=nil, realtotalcost=nil, voucherpayamount=nil, cashpayamount=nil, incentivepayamount=nil, transferpayamount=nil, extendfield3=nil, extendfield4=nil, extendfield5=nil, tags=nil, payeruin=nil, owneruin=nil, operateuin=nil, businesscode=nil, productcode=nil, regionid=nil, instancetype=nil, originalcostwithri=nil, spdeduction=nil, originalcostwithsp=nil)
@BusinessCodeName = businesscodename
@ProductCodeName = productcodename
@PayModeName = paymodename
@ProjectName = projectname
@RegionName = regionname
@ZoneName = zonename
@ResourceId = resourceid
@ResourceName = resourcename
@ActionTypeName = actiontypename
@OrderId = orderid
@PayTime = paytime
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@ConfigDesc = configdesc
@ExtendField1 = extendfield1
@ExtendField2 = extendfield2
@TotalCost = totalcost
@Discount = discount
@ReduceType = reducetype
@RealTotalCost = realtotalcost
@VoucherPayAmount = voucherpayamount
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@TransferPayAmount = transferpayamount
@ExtendField3 = extendfield3
@ExtendField4 = extendfield4
@ExtendField5 = extendfield5
@Tags = tags
@PayerUin = payeruin
@OwnerUin = owneruin
@OperateUin = operateuin
@BusinessCode = businesscode
@ProductCode = productcode
@RegionId = regionid
@InstanceType = instancetype
@OriginalCostWithRI = originalcostwithri
@SPDeduction = spdeduction
@OriginalCostWithSP = originalcostwithsp
end
def deserialize(params)
@BusinessCodeName = params['BusinessCodeName']
@ProductCodeName = params['ProductCodeName']
@PayModeName = params['PayModeName']
@ProjectName = params['ProjectName']
@RegionName = params['RegionName']
@ZoneName = params['ZoneName']
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@ActionTypeName = params['ActionTypeName']
@OrderId = params['OrderId']
@PayTime = params['PayTime']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
@ConfigDesc = params['ConfigDesc']
@ExtendField1 = params['ExtendField1']
@ExtendField2 = params['ExtendField2']
@TotalCost = params['TotalCost']
@Discount = params['Discount']
@ReduceType = params['ReduceType']
@RealTotalCost = params['RealTotalCost']
@VoucherPayAmount = params['VoucherPayAmount']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@TransferPayAmount = params['TransferPayAmount']
@ExtendField3 = params['ExtendField3']
@ExtendField4 = params['ExtendField4']
@ExtendField5 = params['ExtendField5']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
billtaginfo_tmp = BillTagInfo.new
billtaginfo_tmp.deserialize(i)
@Tags << billtaginfo_tmp
end
end
@PayerUin = params['PayerUin']
@OwnerUin = params['OwnerUin']
@OperateUin = params['OperateUin']
@BusinessCode = params['BusinessCode']
@ProductCode = params['ProductCode']
@RegionId = params['RegionId']
@InstanceType = params['InstanceType']
@OriginalCostWithRI = params['OriginalCostWithRI']
@SPDeduction = params['SPDeduction']
@OriginalCostWithSP = params['OriginalCostWithSP']
end
end
# 账单 Tag 信息
class BillTagInfo < TencentCloud::Common::AbstractModel
# @param TagKey: 分账标签键
# @type TagKey: String
# @param TagValue: 标签值
# @type TagValue: String
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 收支明细的流水信息
class BillTransactionInfo < TencentCloud::Common::AbstractModel
# @param ActionType: 收支类型：deduct 扣费, recharge 充值, return 退费， block 冻结, unblock 解冻
# @type ActionType: String
# @param Amount: 流水金额，单位（分）；正数表示入账，负数表示出账
# @type Amount: Integer
# @param Balance: 可用余额，单位（分）；正数表示入账，负数表示出账
# @type Balance: Integer
# @param BillId: 流水号，如20190131020000236005203583326401
# @type BillId: String
# @param OperationInfo: 描述信息
# @type OperationInfo: String
# @param OperationTime: 操作时间"2019-01-31 23:35:10.000"
# @type OperationTime: String
# @param Cash: 现金账户余额，单位（分）
# @type Cash: Integer
# @param Incentive: 赠送金余额，单位（分）
# @type Incentive: Integer
# @param Freezing: 冻结余额，单位（分）
# @type Freezing: Integer
# @param PayChannel: 交易渠道
# @type PayChannel: String
# @param DeductMode: 扣费模式：trade 包年包月(预付费)，hourh 按量-小时结，hourd 按量-日结，hourm 按量-月结，month 按量-月结
# @type DeductMode: String
attr_accessor :ActionType, :Amount, :Balance, :BillId, :OperationInfo, :OperationTime, :Cash, :Incentive, :Freezing, :PayChannel, :DeductMode
def initialize(actiontype=nil, amount=nil, balance=nil, billid=nil, operationinfo=nil, operationtime=nil, cash=nil, incentive=nil, freezing=nil, paychannel=nil, deductmode=nil)
@ActionType = actiontype
@Amount = amount
@Balance = balance
@BillId = billid
@OperationInfo = operationinfo
@OperationTime = operationtime
@Cash = cash
@Incentive = incentive
@Freezing = freezing
@PayChannel = paychannel
@DeductMode = deductmode
end
def deserialize(params)
@ActionType = params['ActionType']
@Amount = params['Amount']
@Balance = params['Balance']
@BillId = params['BillId']
@OperationInfo = params['OperationInfo']
@OperationTime = params['OperationTime']
@Cash = params['Cash']
@Incentive = params['Incentive']
@Freezing = params['Freezing']
@PayChannel = params['PayChannel']
@DeductMode = params['DeductMode']
end
end
# 产品汇总信息
class BusinessSummaryInfo < TencentCloud::Common::AbstractModel
# @param BusinessCode: 产品编码
# @type BusinessCode: String
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCost: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
attr_accessor :BusinessCode, :BusinessCodeName, :TotalCost, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount
def initialize(businesscode=nil, businesscodename=nil, totalcost=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil)
@BusinessCode = businesscode
@BusinessCodeName = businesscodename
@TotalCost = totalcost
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
end
def deserialize(params)
@BusinessCode = params['BusinessCode']
@BusinessCodeName = params['BusinessCodeName']
@TotalCost = params['TotalCost']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
end
end
# 按产品汇总产品详情
class BusinessSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param BusinessCode: 产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessCode: String
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# @type TransferPayAmount: String
# @param BillMonth: 账单月份，格式2019-08
# @type BillMonth: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
attr_accessor :BusinessCode, :BusinessCodeName, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :BillMonth, :TotalCost
def initialize(businesscode=nil, businesscodename=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, billmonth=nil, totalcost=nil)
@BusinessCode = businesscode
@BusinessCodeName = businesscodename
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@BillMonth = billmonth
@TotalCost = totalcost
end
def deserialize(params)
@BusinessCode = params['BusinessCode']
@BusinessCodeName = params['BusinessCodeName']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@BillMonth = params['BillMonth']
@TotalCost = params['TotalCost']
end
end
# 按产品汇总总费用
class BusinessSummaryTotal < TencentCloud::Common::AbstractModel
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# @type TransferPayAmount: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
attr_accessor :RealTotalCost, :VoucherPayAmount, :IncentivePayAmount, :CashPayAmount, :TransferPayAmount, :TotalCost
def initialize(realtotalcost=nil, voucherpayamount=nil, incentivepayamount=nil, cashpayamount=nil, transferpayamount=nil, totalcost=nil)
@RealTotalCost = realtotalcost
@VoucherPayAmount = voucherpayamount
@IncentivePayAmount = incentivepayamount
@CashPayAmount = cashpayamount
@TransferPayAmount = transferpayamount
@TotalCost = totalcost
end
def deserialize(params)
@RealTotalCost = params['RealTotalCost']
@VoucherPayAmount = params['VoucherPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@CashPayAmount = params['CashPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@TotalCost = params['TotalCost']
end
end
# 产品过滤条件
class ConditionBusiness < TencentCloud::Common::AbstractModel
# @param BusinessCode: 产品名称代码
# @type BusinessCode: String
# @param BusinessCodeName: 产品名称
# @type BusinessCodeName: String
attr_accessor :BusinessCode, :BusinessCodeName
def initialize(businesscode=nil, businesscodename=nil)
@BusinessCode = businesscode
@BusinessCodeName = businesscodename
end
def deserialize(params)
@BusinessCode = params['BusinessCode']
@BusinessCodeName = params['BusinessCodeName']
end
end
# 付费模式过滤条件
class ConditionPayMode < TencentCloud::Common::AbstractModel
# @param PayMode: 付费模式
# @type PayMode: String
# @param PayModeName: 付费模式名称
# @type PayModeName: String
attr_accessor :PayMode, :PayModeName
def initialize(paymode=nil, paymodename=nil)
@PayMode = paymode
@PayModeName = paymodename
end
def deserialize(params)
@PayMode = params['PayMode']
@PayModeName = params['PayModeName']
end
end
# 项目过滤条件
class ConditionProject < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: String
# @param ProjectName: 项目名称
# @type ProjectName: String
attr_accessor :ProjectId, :ProjectName
def initialize(projectid=nil, projectname=nil)
@ProjectId = projectid
@ProjectName = projectname
end
def deserialize(params)
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
end
end
# 地域过滤条件
class ConditionRegion < TencentCloud::Common::AbstractModel
# @param RegionId: 地域ID
# @type RegionId: String
# @param RegionName: 地域名称
# @type RegionName: String
attr_accessor :RegionId, :RegionName
def initialize(regionid=nil, regionname=nil)
@RegionId = regionid
@RegionName = regionname
end
def deserialize(params)
@RegionId = params['RegionId']
@RegionName = params['RegionName']
end
end
# 账单筛选条件对象
class Conditions < TencentCloud::Common::AbstractModel
# @param TimeRange: 只支持6和12两个值
# @type TimeRange: Integer
# @param BusinessCode: 产品名称代码
# @type BusinessCode: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param RegionId: 地域ID
# @type RegionId: Integer
# @param PayMode: 付费模式，可选prePay和postPay
# @type PayMode: String
# @param ResourceKeyword: 资源关键字
# @type ResourceKeyword: String
# @param BusinessCodes: 产品名称代码
# @type BusinessCodes: Array
# @param ProductCodes: 子产品名称代码
# @type ProductCodes: Array
# @param RegionIds: 地域ID
# @type RegionIds: Array
# @param ProjectIds: 项目ID
# @type ProjectIds: Array
# @param PayModes: 付费模式，可选prePay和postPay
# @type PayModes: Array
# @param ActionTypes: 交易类型
# @type ActionTypes: Array
# @param HideFreeCost: 是否隐藏0元流水
# @type HideFreeCost: Integer
# @param OrderByCost: 排序规则，可选desc和asc
# @type OrderByCost: String
# @param BillIds: 交易ID
# @type BillIds: Array
# @param ComponentCodes: 组件编码
# @type ComponentCodes: Array
# @param FileIds: 文件ID
# @type FileIds: Array
# @param FileTypes: 文件类型
# @type FileTypes: Array
# @param Status: 状态
# @type Status: Array
attr_accessor :TimeRange, :BusinessCode, :ProjectId, :RegionId, :PayMode, :ResourceKeyword, :BusinessCodes, :ProductCodes, :RegionIds, :ProjectIds, :PayModes, :ActionTypes, :HideFreeCost, :OrderByCost, :BillIds, :ComponentCodes, :FileIds, :FileTypes, :Status
def initialize(timerange=nil, businesscode=nil, projectid=nil, regionid=nil, paymode=nil, resourcekeyword=nil, businesscodes=nil, productcodes=nil, regionids=nil, projectids=nil, paymodes=nil, actiontypes=nil, hidefreecost=nil, orderbycost=nil, billids=nil, componentcodes=nil, fileids=nil, filetypes=nil, status=nil)
@TimeRange = timerange
@BusinessCode = businesscode
@ProjectId = projectid
@RegionId = regionid
@PayMode = paymode
@ResourceKeyword = resourcekeyword
@BusinessCodes = businesscodes
@ProductCodes = productcodes
@RegionIds = regionids
@ProjectIds = projectids
@PayModes = paymodes
@ActionTypes = actiontypes
@HideFreeCost = hidefreecost
@OrderByCost = orderbycost
@BillIds = billids
@ComponentCodes = componentcodes
@FileIds = fileids
@FileTypes = filetypes
@Status = status
end
def deserialize(params)
@TimeRange = params['TimeRange']
@BusinessCode = params['BusinessCode']
@ProjectId = params['ProjectId']
@RegionId = params['RegionId']
@PayMode = params['PayMode']
@ResourceKeyword = params['ResourceKeyword']
@BusinessCodes = params['BusinessCodes']
@ProductCodes = params['ProductCodes']
@RegionIds = params['RegionIds']
@ProjectIds = params['ProjectIds']
@PayModes = params['PayModes']
@ActionTypes = params['ActionTypes']
@HideFreeCost = params['HideFreeCost']
@OrderByCost = params['OrderByCost']
@BillIds = params['BillIds']
@ComponentCodes = params['ComponentCodes']
@FileIds = params['FileIds']
@FileTypes = params['FileTypes']
@Status = params['Status']
end
end
# 消耗按产品汇总详情
class ConsumptionBusinessSummaryDataItem < TencentCloud::Common::AbstractModel
# @param BusinessCode: 产品名称代码
# @type BusinessCode: String
# @param BusinessCodeName: 产品名称
# @type BusinessCodeName: String
# @param RealTotalCost: 折后总价
# @type RealTotalCost: String
# @param Trend: 费用趋势
# @type Trend: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTrend`
# @param CashPayAmount: 现金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 代金券
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
attr_accessor :BusinessCode, :BusinessCodeName, :RealTotalCost, :Trend, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount
def initialize(businesscode=nil, businesscodename=nil, realtotalcost=nil, trend=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil)
@BusinessCode = businesscode
@BusinessCodeName = businesscodename
@RealTotalCost = realtotalcost
@Trend = trend
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
end
def deserialize(params)
@BusinessCode = params['BusinessCode']
@BusinessCodeName = params['BusinessCodeName']
@RealTotalCost = params['RealTotalCost']
unless params['Trend'].nil?
@Trend = ConsumptionSummaryTrend.new
@Trend.deserialize(params['Trend'])
end
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
end
end
# 消耗按项目汇总详情
class ConsumptionProjectSummaryDataItem < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: String
# @param ProjectName: 项目名称
# @type ProjectName: String
# @param RealTotalCost: 折后总价
# @type RealTotalCost: String
# @param Trend: 趋势
# @type Trend: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTrend`
# @param Business: 产品消耗详情
# @type Business: Array
# @param CashPayAmount: 现金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 代金券
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
attr_accessor :ProjectId, :ProjectName, :RealTotalCost, :Trend, :Business, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount
def initialize(projectid=nil, projectname=nil, realtotalcost=nil, trend=nil, business=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil)
@ProjectId = projectid
@ProjectName = projectname
@RealTotalCost = realtotalcost
@Trend = trend
@Business = business
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
end
def deserialize(params)
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
@RealTotalCost = params['RealTotalCost']
unless params['Trend'].nil?
@Trend = ConsumptionSummaryTrend.new
@Trend.deserialize(params['Trend'])
end
unless params['Business'].nil?
@Business = []
params['Business'].each do |i|
consumptionbusinesssummarydataitem_tmp = ConsumptionBusinessSummaryDataItem.new
consumptionbusinesssummarydataitem_tmp.deserialize(i)
@Business << consumptionbusinesssummarydataitem_tmp
end
end
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
end
end
# 消耗按地域汇总详情
class ConsumptionRegionSummaryDataItem < TencentCloud::Common::AbstractModel
# @param RegionId: 地域ID
# @type RegionId: String
# @param RegionName: 地域名称
# @type RegionName: String
# @param RealTotalCost: 折后总价
# @type RealTotalCost: String
# @param Trend: 趋势
# @type Trend: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTrend`
# @param Business: 产品消费详情
# @type Business: Array
attr_accessor :RegionId, :RegionName, :RealTotalCost, :Trend, :Business
def initialize(regionid=nil, regionname=nil, realtotalcost=nil, trend=nil, business=nil)
@RegionId = regionid
@RegionName = regionname
@RealTotalCost = realtotalcost
@Trend = trend
@Business = business
end
def deserialize(params)
@RegionId = params['RegionId']
@RegionName = params['RegionName']
@RealTotalCost = params['RealTotalCost']
unless params['Trend'].nil?
@Trend = ConsumptionSummaryTrend.new
@Trend.deserialize(params['Trend'])
end
unless params['Business'].nil?
@Business = []
params['Business'].each do |i|
consumptionbusinesssummarydataitem_tmp = ConsumptionBusinessSummaryDataItem.new
consumptionbusinesssummarydataitem_tmp.deserialize(i)
@Business << consumptionbusinesssummarydataitem_tmp
end
end
end
end
# 消耗按资源汇总过滤条件
class ConsumptionResourceSummaryConditionValue < TencentCloud::Common::AbstractModel
# @param Business: 产品列表
# @type Business: Array
# @param Project: 项目列表
# @type Project: Array
# @param Region: 地域列表
# @type Region: Array
# @param PayMode: 付费模式列表
# @type PayMode: Array
attr_accessor :Business, :Project, :Region, :PayMode
def initialize(business=nil, project=nil, region=nil, paymode=nil)
@Business = business
@Project = project
@Region = region
@PayMode = paymode
end
def deserialize(params)
unless params['Business'].nil?
@Business = []
params['Business'].each do |i|
conditionbusiness_tmp = ConditionBusiness.new
conditionbusiness_tmp.deserialize(i)
@Business << conditionbusiness_tmp
end
end
unless params['Project'].nil?
@Project = []
params['Project'].each do |i|
conditionproject_tmp = ConditionProject.new
conditionproject_tmp.deserialize(i)
@Project << conditionproject_tmp
end
end
unless params['Region'].nil?
@Region = []
params['Region'].each do |i|
conditionregion_tmp = ConditionRegion.new
conditionregion_tmp.deserialize(i)
@Region << conditionregion_tmp
end
end
unless params['PayMode'].nil?
@PayMode = []
params['PayMode'].each do |i|
conditionpaymode_tmp = ConditionPayMode.new
conditionpaymode_tmp.deserialize(i)
@PayMode << conditionpaymode_tmp
end
end
end
end
# 消耗按资源汇总详情
class ConsumptionResourceSummaryDataItem < TencentCloud::Common::AbstractModel
# @param ResourceId: 资源ID
# @type ResourceId: String
# @param ResourceName: 资源名称
# @type ResourceName: String
# @param RealTotalCost: 折后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金花费
# @type CashPayAmount: String
# @param ProjectId: 项目ID
# @type ProjectId: String
# @param ProjectName: 项目名称
# @type ProjectName: String
# @param RegionId: 地域ID
# @type RegionId: String
# @param RegionName: 地域名称
# @type RegionName: String
# @param PayMode: 付费模式
# @type PayMode: String
# @param PayModeName: 付费模式名称
# @type PayModeName: String
# @param BusinessCode: 产品名称代码
# @type BusinessCode: String
# @param BusinessCodeName: 产品名称
# @type BusinessCodeName: String
# @param ConsumptionTypeName: 消耗类型
# @type ConsumptionTypeName: String
# @param RealCost: 折前价
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealCost: String
# @param FeeBeginTime: 费用起始时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FeeBeginTime: String
# @param FeeEndTime: 费用结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FeeEndTime: String
# @param DayDiff: 天数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DayDiff: String
# @param DailyTotalCost: 每日消耗
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DailyTotalCost: String
# @param OrderId: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OrderId: String
# @param VoucherPayAmount: 代金券
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VoucherPayAmount: String
# @param IncentivePayAmount: 赠送金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IncentivePayAmount: String
# @param TransferPayAmount: 分成金
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
attr_accessor :ResourceId, :ResourceName, :RealTotalCost, :CashPayAmount, :ProjectId, :ProjectName, :RegionId, :RegionName, :PayMode, :PayModeName, :BusinessCode, :BusinessCodeName, :ConsumptionTypeName, :RealCost, :FeeBeginTime, :FeeEndTime, :DayDiff, :DailyTotalCost, :OrderId, :VoucherPayAmount, :IncentivePayAmount, :TransferPayAmount
def initialize(resourceid=nil, resourcename=nil, realtotalcost=nil, cashpayamount=nil, projectid=nil, projectname=nil, regionid=nil, regionname=nil, paymode=nil, paymodename=nil, businesscode=nil, businesscodename=nil, consumptiontypename=nil, realcost=nil, feebegintime=nil, feeendtime=nil, daydiff=nil, dailytotalcost=nil, orderid=nil, voucherpayamount=nil, incentivepayamount=nil, transferpayamount=nil)
@ResourceId = resourceid
@ResourceName = resourcename
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@ProjectId = projectid
@ProjectName = projectname
@RegionId = regionid
@RegionName = regionname
@PayMode = paymode
@PayModeName = paymodename
@BusinessCode = businesscode
@BusinessCodeName = businesscodename
@ConsumptionTypeName = consumptiontypename
@RealCost = realcost
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@DayDiff = daydiff
@DailyTotalCost = dailytotalcost
@OrderId = orderid
@VoucherPayAmount = voucherpayamount
@IncentivePayAmount = incentivepayamount
@TransferPayAmount = transferpayamount
end
def deserialize(params)
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
@RegionId = params['RegionId']
@RegionName = params['RegionName']
@PayMode = params['PayMode']
@PayModeName = params['PayModeName']
@BusinessCode = params['BusinessCode']
@BusinessCodeName = params['BusinessCodeName']
@ConsumptionTypeName = params['ConsumptionTypeName']
@RealCost = params['RealCost']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
@DayDiff = params['DayDiff']
@DailyTotalCost = params['DailyTotalCost']
@OrderId = params['OrderId']
@VoucherPayAmount = params['VoucherPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@TransferPayAmount = params['TransferPayAmount']
end
end
# 消耗汇总详情
class ConsumptionSummaryTotal < TencentCloud::Common::AbstractModel
# @param RealTotalCost: 折后总价
# @type RealTotalCost: String
attr_accessor :RealTotalCost
def initialize(realtotalcost=nil)
@RealTotalCost = realtotalcost
end
def deserialize(params)
@RealTotalCost = params['RealTotalCost']
end
end
# 消耗费用趋势
class ConsumptionSummaryTrend < TencentCloud::Common::AbstractModel
# @param Type: 趋势类型，upward上升/downward下降/none无
# @type Type: String
# @param Value: 趋势值，Type为none是该字段值为null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Type, :Value
def initialize(type=nil, value=nil)
@Type = type
@Value = value
end
def deserialize(params)
@Type = params['Type']
@Value = params['Value']
end
end
# cos产品用量明细返回数据结构
class CosDetailSets < TencentCloud::Common::AbstractModel
# @param BucketName: 存储桶名称
# @type BucketName: String
# @param DosageBeginTime: 用量开始时间
# @type DosageBeginTime: String
# @param DosageEndTime: 用量结束时间
# @type DosageEndTime: String
# @param SubProductCodeName: 子产品名称
# @type SubProductCodeName: String
# @param BillingItemCodeName: 计费项名称
# @type BillingItemCodeName: String
# @param DosageValue: 用量
# @type DosageValue: String
# @param Unit: 单位
# @type Unit: String
attr_accessor :BucketName, :DosageBeginTime, :DosageEndTime, :SubProductCodeName, :BillingItemCodeName, :DosageValue, :Unit
def initialize(bucketname=nil, dosagebegintime=nil, dosageendtime=nil, subproductcodename=nil, billingitemcodename=nil, dosagevalue=nil, unit=nil)
@BucketName = bucketname
@DosageBeginTime = dosagebegintime
@DosageEndTime = dosageendtime
@SubProductCodeName = subproductcodename
@BillingItemCodeName = billingitemcodename
@DosageValue = dosagevalue
@Unit = unit
end
def deserialize(params)
@BucketName = params['BucketName']
@DosageBeginTime = params['DosageBeginTime']
@DosageEndTime = params['DosageEndTime']
@SubProductCodeName = params['SubProductCodeName']
@BillingItemCodeName = params['BillingItemCodeName']
@DosageValue = params['DosageValue']
@Unit = params['Unit']
end
end
# 消耗组件明细
class CostComponentSet < TencentCloud::Common::AbstractModel
# @param ComponentCodeName: 组件类型名称
# @type ComponentCodeName: String
# @param ItemCodeName: 组件名称
# @type ItemCodeName: String
# @param SinglePrice: 刊例价
# @type SinglePrice: String
# @param PriceUnit: 刊例价单位
# @type PriceUnit: String
# @param UsedAmount: 用量
# @type UsedAmount: String
# @param UsedAmountUnit: 用量单位
# @type UsedAmountUnit: String
# @param Cost: 原价
# @type Cost: String
# @param Discount: 折扣
# @type Discount: String
# @param RealCost: 折后价
# @type RealCost: String
# @param VoucherPayAmount: 代金券支付金额
# @type VoucherPayAmount: String
# @param CashPayAmount: 现金支付金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送金支付金额
# @type IncentivePayAmount: String
attr_accessor :ComponentCodeName, :ItemCodeName, :SinglePrice, :PriceUnit, :UsedAmount, :UsedAmountUnit, :Cost, :Discount, :RealCost, :VoucherPayAmount, :CashPayAmount, :IncentivePayAmount
def initialize(componentcodename=nil, itemcodename=nil, singleprice=nil, priceunit=nil, usedamount=nil, usedamountunit=nil, cost=nil, discount=nil, realcost=nil, voucherpayamount=nil, cashpayamount=nil, incentivepayamount=nil)
@ComponentCodeName = componentcodename
@ItemCodeName = itemcodename
@SinglePrice = singleprice
@PriceUnit = priceunit
@UsedAmount = usedamount
@UsedAmountUnit = usedamountunit
@Cost = cost
@Discount = discount
@RealCost = realcost
@VoucherPayAmount = voucherpayamount
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
end
def deserialize(params)
@ComponentCodeName = params['ComponentCodeName']
@ItemCodeName = params['ItemCodeName']
@SinglePrice = params['SinglePrice']
@PriceUnit = params['PriceUnit']
@UsedAmount = params['UsedAmount']
@UsedAmountUnit = params['UsedAmountUnit']
@Cost = params['Cost']
@Discount = params['Discount']
@RealCost = params['RealCost']
@VoucherPayAmount = params['VoucherPayAmount']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
end
end
# 消耗明细数据类型
class CostDetail < TencentCloud::Common::AbstractModel
# @param PayerUin: 支付者uin
# @type PayerUin: String
# @param BusinessCodeName: 产品名称
# @type BusinessCodeName: String
# @param ProductCodeName: 子产品名称
# @type ProductCodeName: String
# @param PayModeName: 计费模式名称
# @type PayModeName: String
# @param ProjectName: 项目名称
# @type ProjectName: String
# @param RegionName: 区域名称
# @type RegionName: String
# @param ZoneName: 地区名称
# @type ZoneName: String
# @param ResourceId: 资源id
# @type ResourceId: String
# @param ResourceName: 资源名称
# @type ResourceName: String
# @param ActionTypeName: 类型名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ActionTypeName: String
# @param OrderId: 订单id
# @type OrderId: String
# @param BillId: 交易id
# @type BillId: String
# @param FeeBeginTime: 费用开始时间
# @type FeeBeginTime: String
# @param FeeEndTime: 费用结束时间
# @type FeeEndTime: String
# @param ComponentSet: 组件明细
# @type ComponentSet: Array
# @param ProductCode: 子产品名称代码
# @type ProductCode: String
attr_accessor :PayerUin, :BusinessCodeName, :ProductCodeName, :PayModeName, :ProjectName, :RegionName, :ZoneName, :ResourceId, :ResourceName, :ActionTypeName, :OrderId, :BillId, :FeeBeginTime, :FeeEndTime, :ComponentSet, :ProductCode
def initialize(payeruin=nil, businesscodename=nil, productcodename=nil, paymodename=nil, projectname=nil, regionname=nil, zonename=nil, resourceid=nil, resourcename=nil, actiontypename=nil, orderid=nil, billid=nil, feebegintime=nil, feeendtime=nil, componentset=nil, productcode=nil)
@PayerUin = payeruin
@BusinessCodeName = businesscodename
@ProductCodeName = productcodename
@PayModeName = paymodename
@ProjectName = projectname
@RegionName = regionname
@ZoneName = zonename
@ResourceId = resourceid
@ResourceName = resourcename
@ActionTypeName = actiontypename
@OrderId = orderid
@BillId = billid
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@ComponentSet = componentset
@ProductCode = productcode
end
def deserialize(params)
@PayerUin = params['PayerUin']
@BusinessCodeName = params['BusinessCodeName']
@ProductCodeName = params['ProductCodeName']
@PayModeName = params['PayModeName']
@ProjectName = params['ProjectName']
@RegionName = params['RegionName']
@ZoneName = params['ZoneName']
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@ActionTypeName = params['ActionTypeName']
@OrderId = params['OrderId']
@BillId = params['BillId']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
unless params['ComponentSet'].nil?
@ComponentSet = []
params['ComponentSet'].each do |i|
costcomponentset_tmp = CostComponentSet.new
costcomponentset_tmp.deserialize(i)
@ComponentSet << costcomponentset_tmp
end
end
@ProductCode = params['ProductCode']
end
end
# CreateAllocationTag请求参数结构体
class CreateAllocationTagRequest < TencentCloud::Common::AbstractModel
# @param TagKey: 用户分账标签键
# @type TagKey: Array
attr_accessor :TagKey
def initialize(tagkey=nil)
@TagKey = tagkey
end
def deserialize(params)
@TagKey = params['TagKey']
end
end
# CreateAllocationTag返回参数结构体
class CreateAllocationTagResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateSavingPlanOrder请求参数结构体
class CreateSavingPlanOrderRequest < TencentCloud::Common::AbstractModel
# @param RegionId: 地域编码
# @type RegionId: Integer
# @param ZoneId: 区域编码
# @type ZoneId: Integer
# @param PrePayType: 预付费类型
# @type PrePayType: String
# @param TimeSpan: 时长
# @type TimeSpan: Integer
# @param TimeUnit: 时长单位
# @type TimeUnit: String
# @param CommodityCode: 商品唯一标识
# @type CommodityCode: String
# @param PromiseUseAmount: 承诺时长内的小额金额（单位：分）
# @type PromiseUseAmount: Integer
# @param SpecifyEffectTime: 节省计划的指定生效时间，若不传则为当前下单时间。传参数格式:"2023-10-01 00:00:00"，仅支持指定日期的0点时刻
# @type SpecifyEffectTime: String
attr_accessor :RegionId, :ZoneId, :PrePayType, :TimeSpan, :TimeUnit, :CommodityCode, :PromiseUseAmount, :SpecifyEffectTime
def initialize(regionid=nil, zoneid=nil, prepaytype=nil, timespan=nil, timeunit=nil, commoditycode=nil, promiseuseamount=nil, specifyeffecttime=nil)
@RegionId = regionid
@ZoneId = zoneid
@PrePayType = prepaytype
@TimeSpan = timespan
@TimeUnit = timeunit
@CommodityCode = commoditycode
@PromiseUseAmount = promiseuseamount
@SpecifyEffectTime = specifyeffecttime
end
def deserialize(params)
@RegionId = params['RegionId']
@ZoneId = params['ZoneId']
@PrePayType = params['PrePayType']
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
@CommodityCode = params['CommodityCode']
@PromiseUseAmount = params['PromiseUseAmount']
@SpecifyEffectTime = params['SpecifyEffectTime']
end
end
# CreateSavingPlanOrder返回参数结构体
class CreateSavingPlanOrderResponse < TencentCloud::Common::AbstractModel
# @param BigDealId: 订单号
# @type BigDealId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BigDealId, :RequestId
def initialize(bigdealid=nil, requestid=nil)
@BigDealId = bigdealid
@RequestId = requestid
end
def deserialize(params)
@BigDealId = params['BigDealId']
@RequestId = params['RequestId']
end
end
# 订单数据对象
class Deal < TencentCloud::Common::AbstractModel
# @param OrderId: 订单号
# @type OrderId: String
# @param Status: 订单的状态 1：未支付 2：已支付3：发货中 4：已发货 5：发货失败 6：已退款 7：已关单 8：订单过期 9：订单已失效 10：产品已失效 11：代付拒绝 12：支付中
# @type Status: Integer
# @param Payer: 支付者
# @type Payer: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param Creator: 创建人
# @type Creator: String
# @param RealTotalCost: 实际支付金额（分）
# @type RealTotalCost: Integer
# @param VoucherDecline: 代金券抵扣金额（分）
# @type VoucherDecline: Integer
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param GoodsCategoryId: 产品分类ID
# @type GoodsCategoryId: Integer
# @param ProductInfo: 产品详情
# @type ProductInfo: Array
# @param TimeSpan: 时长
# @type TimeSpan: Float
# @param TimeUnit: 时间单位
# @type TimeUnit: String
# @param Currency: 货币单位
# @type Currency: String
# @param Policy: 折扣率
# @type Policy: Float
# @param Price: 单价（分）
# @type Price: Float
# @param TotalCost: 原价（分）
# @type TotalCost: Float
# @param ProductCode: 产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductCode: String
# @param SubProductCode: 子产品编码
# @type SubProductCode: String
# @param BigDealId: 大订单号
# @type BigDealId: String
# @param Formula: 退费公式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Formula: String
# @param RefReturnDeals: 退费涉及订单信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RefReturnDeals: String
# @param PayMode: 付费模式：prePay 预付费 postPay后付费 riPay预留实例
# @type PayMode: String
# @param Action: 交易类型
# modifyNetworkMode 调整带宽模式
# modifyNetworkSize 调整带宽大小
# refund 退款
# downgrade 降配
# upgrade 升配
# renew 续费
# purchase 购买
# preMoveOut 包年包月迁出资源
# preMoveIn 包年包月迁入资源
# preToPost 预付费转后付费
# postMoveOut 按量计费迁出资源
# postMoveIn 按量计费迁入资源
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Action: String
# @param ProductName: 产品编码中文名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductName: String
# @param SubProductName: 子产品编码中文名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubProductName: String
# @param ResourceId: 订单对应的资源id, 查询参数Limit超过200，将返回null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceId: Array
attr_accessor :OrderId, :Status, :Payer, :CreateTime, :Creator, :RealTotalCost, :VoucherDecline, :ProjectId, :GoodsCategoryId, :ProductInfo, :TimeSpan, :TimeUnit, :Currency, :Policy, :Price, :TotalCost, :ProductCode, :SubProductCode, :BigDealId, :Formula, :RefReturnDeals, :PayMode, :Action, :ProductName, :SubProductName, :ResourceId
def initialize(orderid=nil, status=nil, payer=nil, createtime=nil, creator=nil, realtotalcost=nil, voucherdecline=nil, projectid=nil, goodscategoryid=nil, productinfo=nil, timespan=nil, timeunit=nil, currency=nil, policy=nil, price=nil, totalcost=nil, productcode=nil, subproductcode=nil, bigdealid=nil, formula=nil, refreturndeals=nil, paymode=nil, action=nil, productname=nil, subproductname=nil, resourceid=nil)
@OrderId = orderid
@Status = status
@Payer = payer
@CreateTime = createtime
@Creator = creator
@RealTotalCost = realtotalcost
@VoucherDecline = voucherdecline
@ProjectId = projectid
@GoodsCategoryId = goodscategoryid
@ProductInfo = productinfo
@TimeSpan = timespan
@TimeUnit = timeunit
@Currency = currency
@Policy = policy
@Price = price
@TotalCost = totalcost
@ProductCode = productcode
@SubProductCode = subproductcode
@BigDealId = bigdealid
@Formula = formula
@RefReturnDeals = refreturndeals
@PayMode = paymode
@Action = action
@ProductName = productname
@SubProductName = subproductname
@ResourceId = resourceid
end
def deserialize(params)
@OrderId = params['OrderId']
@Status = params['Status']
@Payer = params['Payer']
@CreateTime = params['CreateTime']
@Creator = params['Creator']
@RealTotalCost = params['RealTotalCost']
@VoucherDecline = params['VoucherDecline']
@ProjectId = params['ProjectId']
@GoodsCategoryId = params['GoodsCategoryId']
unless params['ProductInfo'].nil?
@ProductInfo = []
params['ProductInfo'].each do |i|
productinfo_tmp = ProductInfo.new
productinfo_tmp.deserialize(i)
@ProductInfo << productinfo_tmp
end
end
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
@Currency = params['Currency']
@Policy = params['Policy']
@Price = params['Price']
@TotalCost = params['TotalCost']
@ProductCode = params['ProductCode']
@SubProductCode = params['SubProductCode']
@BigDealId = params['BigDealId']
@Formula = params['Formula']
@RefReturnDeals = params['RefReturnDeals']
@PayMode = params['PayMode']
@Action = params['Action']
@ProductName = params['ProductName']
@SubProductName = params['SubProductName']
@ResourceId = params['ResourceId']
end
end
# DeleteAllocationTag请求参数结构体
class DeleteAllocationTagRequest < TencentCloud::Common::AbstractModel
# @param TagKey: 用户分账标签键
# @type TagKey: Array
attr_accessor :TagKey
def initialize(tagkey=nil)
@TagKey = tagkey
end
def deserialize(params)
@TagKey = params['TagKey']
end
end
# DeleteAllocationTag返回参数结构体
class DeleteAllocationTagResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccountBalance请求参数结构体
class DescribeAccountBalanceRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAccountBalance返回参数结构体
class DescribeAccountBalanceResponse < TencentCloud::Common::AbstractModel
# @param Balance: 接口做过变更,为兼容老接口,本字段与RealBalance相同,为当前真实可用余额,单位 分
# @type Balance: Integer
# @param Uin: 查询的用户Uin
# @type Uin: Integer
# @param RealBalance: 当前真实可用余额,单位 分
# @type RealBalance: Float
# @param CashAccountBalance: 现金账户余额,单位 分
# @type CashAccountBalance: Float
# @param IncomeIntoAccountBalance: 收益转入账户余额,单位 分
# @type IncomeIntoAccountBalance: Float
# @param PresentAccountBalance: 赠送账户余额,单位 分
# @type PresentAccountBalance: Float
# @param FreezeAmount: 冻结金额,单位 分
# @type FreezeAmount: Float
# @param OweAmount: 欠费金额,单位 分
# @type OweAmount: Float
# @param IsAllowArrears: 是否允许欠费消费
# @type IsAllowArrears: Boolean
# @param IsCreditLimited: 是否限制信用额度
# @type IsCreditLimited: Boolean
# @param CreditAmount: 信用额度
# @type CreditAmount: Float
# @param CreditBalance: 可用信用额度
# @type CreditBalance: Float
# @param RealCreditBalance: 真实可用信用额度
# @type RealCreditBalance: Float
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Balance, :Uin, :RealBalance, :CashAccountBalance, :IncomeIntoAccountBalance, :PresentAccountBalance, :FreezeAmount, :OweAmount, :IsAllowArrears, :IsCreditLimited, :CreditAmount, :CreditBalance, :RealCreditBalance, :RequestId
def initialize(balance=nil, uin=nil, realbalance=nil, cashaccountbalance=nil, incomeintoaccountbalance=nil, presentaccountbalance=nil, freezeamount=nil, oweamount=nil, isallowarrears=nil, iscreditlimited=nil, creditamount=nil, creditbalance=nil, realcreditbalance=nil, requestid=nil)
@Balance = balance
@Uin = uin
@RealBalance = realbalance
@CashAccountBalance = cashaccountbalance
@IncomeIntoAccountBalance = incomeintoaccountbalance
@PresentAccountBalance = presentaccountbalance
@FreezeAmount = freezeamount
@OweAmount = oweamount
@IsAllowArrears = isallowarrears
@IsCreditLimited = iscreditlimited
@CreditAmount = creditamount
@CreditBalance = creditbalance
@RealCreditBalance = realcreditbalance
@RequestId = requestid
end
def deserialize(params)
@Balance = params['Balance']
@Uin = params['Uin']
@RealBalance = params['RealBalance']
@CashAccountBalance = params['CashAccountBalance']
@IncomeIntoAccountBalance = params['IncomeIntoAccountBalance']
@PresentAccountBalance = params['PresentAccountBalance']
@FreezeAmount = params['FreezeAmount']
@OweAmount = params['OweAmount']
@IsAllowArrears = params['IsAllowArrears']
@IsCreditLimited = params['IsCreditLimited']
@CreditAmount = params['CreditAmount']
@CreditBalance = params['CreditBalance']
@RealCreditBalance = params['RealCreditBalance']
@RequestId = params['RequestId']
end
end
# DescribeBillDetailForOrganization请求参数结构体
class DescribeBillDetailForOrganizationRequest < TencentCloud::Common::AbstractModel
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，依次类推
# @type Offset: Integer
# @param Limit: 数量，最大值为100
# @type Limit: Integer
# @param PeriodType: 周期类型，byUsedTime按计费周期/byPayTime按扣费周期。需要与费用中心该月份账单的周期保持一致。您可前往[账单概览](https://console.cloud.tencent.com/expense/bill/overview)页面顶部查看确认您的账单统计周期类型。
# @type PeriodType: String
# @param Month: 月份，格式为yyyy-mm，Month和BeginTime&EndTime必传一个，如果有传BeginTime&EndTime则Month字段无效。最多可拉取近18个月内的数据。
# @type Month: String
# @param BeginTime: 周期开始时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为相同月份，不支持跨月查询，查询结果是整月数据。最多可拉取18个月内的数据。
# @type BeginTime: String
# @param EndTime: 周期结束时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为相同月份，不支持跨月查询，查询结果是整月数据。最多可拉取近18个月内的数据。
# @type EndTime: String
# @param NeedRecordNum: 是否需要访问列表的总记录数，用于前端分页
# 1-表示需要， 0-表示不需要
# @type NeedRecordNum: Integer
# @param PayMode: 付费模式 prePay(表示包年包月)/postPay(表示按时按量)
# @type PayMode: String
# @param ResourceId: 查询指定资源信息
# @type ResourceId: String
# @param ActionType: 查询交易类型（请使用交易类型名称入参），入参示例枚举如下：
# 包年包月新购
# 包年包月续费
# 包年包月配置变更
# 包年包月退款
# 按量计费扣费
# 线下项目扣费
# 线下产品扣费
# 调账扣费
# 调账补偿
# 按量计费小时结
# 按量计费日结
# 按量计费月结
# 竞价实例小时结
# 线下项目调账补偿
# 线下产品调账补偿
# 优惠扣费
# 优惠补偿
# 按量计费迁入资源
# 按量计费迁出资源
# 包年包月迁入资源
# 包年包月迁出资源
# 预付费用
# 小时费用
# 预留实例退款
# 按量计费冲正
# 包年包月转按量
# 保底扣款
# 节省计划小时费用
# @type ActionType: String
# @param ProjectId: 项目ID:资源所属项目ID
# @type ProjectId: Integer
# @param BusinessCode: 产品名称代码
# 备注：如需获取当月使用过的BusinessCode，请调用API：获取产品汇总费用分布
# @type BusinessCode: String
# @param Context: 上一次请求返回的上下文信息，翻页查询Month>=2023-05的月份的数据可加快查询速度，数据量10万级别以上的用户建议使用，查询速度可提升2~10倍
# @type Context: String
attr_accessor :Offset, :Limit, :PeriodType, :Month, :BeginTime, :EndTime, :NeedRecordNum, :PayMode, :ResourceId, :ActionType, :ProjectId, :BusinessCode, :Context
extend Gem::Deprecate
deprecate :PeriodType, :none, 2023, 11
deprecate :PeriodType=, :none, 2023, 11
def initialize(offset=nil, limit=nil, periodtype=nil, month=nil, begintime=nil, endtime=nil, needrecordnum=nil, paymode=nil, resourceid=nil, actiontype=nil, projectid=nil, businesscode=nil, context=nil)
@Offset = offset
@Limit = limit
@PeriodType = periodtype
@Month = month
@BeginTime = begintime
@EndTime = endtime
@NeedRecordNum = needrecordnum
@PayMode = paymode
@ResourceId = resourceid
@ActionType = actiontype
@ProjectId = projectid
@BusinessCode = businesscode
@Context = context
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
@PeriodType = params['PeriodType']
@Month = params['Month']
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@NeedRecordNum = params['NeedRecordNum']
@PayMode = params['PayMode']
@ResourceId = params['ResourceId']
@ActionType = params['ActionType']
@ProjectId = params['ProjectId']
@BusinessCode = params['BusinessCode']
@Context = params['Context']
end
end
# DescribeBillDetailForOrganization返回参数结构体
class DescribeBillDetailForOrganizationResponse < TencentCloud::Common::AbstractModel
# @param DetailSet: 详情列表
# @type DetailSet: Array
# @param Total: 总记录数，24小时缓存一次，可能比实际总记录数少
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param Context: 本次请求的上下文信息，可用于下一次请求的请求参数中，加快查询速度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Context: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DetailSet, :Total, :Context, :RequestId
def initialize(detailset=nil, total=nil, context=nil, requestid=nil)
@DetailSet = detailset
@Total = total
@Context = context
@RequestId = requestid
end
def deserialize(params)
unless params['DetailSet'].nil?
@DetailSet = []
params['DetailSet'].each do |i|
distributionbilldetail_tmp = DistributionBillDetail.new
distributionbilldetail_tmp.deserialize(i)
@DetailSet << distributionbilldetail_tmp
end
end
@Total = params['Total']
@Context = params['Context']
@RequestId = params['RequestId']
end
end
# DescribeBillDetail请求参数结构体
class DescribeBillDetailRequest < TencentCloud::Common::AbstractModel
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，依次类推
# @type Offset: Integer
# @param Limit: 数量，最大值为100
# @type Limit: Integer
# @param PeriodType: 周期类型，byUsedTime按计费周期/byPayTime按扣费周期。需要与费用中心该月份账单的周期保持一致。您可前往[账单概览](https://console.cloud.tencent.com/expense/bill/overview)页面顶部查看确认您的账单统计周期类型。
# @type PeriodType: String
# @param Month: 月份，格式为yyyy-mm，Month和BeginTime&EndTime必传一个，如果有传BeginTime&EndTime则Month字段无效。最多可拉取近18个月内的数据。
# @type Month: String
# @param BeginTime: 周期开始时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为相同月份，不支持跨月查询，查询结果是整月数据。最多可拉取18个月内的数据。
# @type BeginTime: String
# @param EndTime: 周期结束时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为相同月份，不支持跨月查询，查询结果是整月数据。最多可拉取近18个月内的数据。
# @type EndTime: String
# @param NeedRecordNum: 是否需要访问列表的总记录数，用于前端分页
# 1-表示需要， 0-表示不需要
# @type NeedRecordNum: Integer
# @param ProductCode: 已废弃参数，未开放
# @type ProductCode: String
# @param PayMode: 付费模式 prePay(表示包年包月)/postPay(表示按时按量)
# @type PayMode: String
# @param ResourceId: 查询指定资源信息
# @type ResourceId: String
# @param ActionType: 查询交易类型（请使用交易类型名称入参），入参示例枚举如下：
# 包年包月新购
# 包年包月续费
# 包年包月配置变更
# 包年包月退款
# 按量计费扣费
# 线下项目扣费
# 线下产品扣费
# 调账扣费
# 调账补偿
# 按量计费小时结
# 按量计费日结
# 按量计费月结
# 竞价实例小时结
# 线下项目调账补偿
# 线下产品调账补偿
# 优惠扣费
# 优惠补偿
# 按量计费迁入资源
# 按量计费迁出资源
# 包年包月迁入资源
# 包年包月迁出资源
# 预付费用
# 小时费用
# 预留实例退款
# 按量计费冲正
# 包年包月转按量
# 保底扣款
# 节省计划小时费用
# @type ActionType: String
# @param ProjectId: 项目ID:资源所属项目ID
# @type ProjectId: Integer
# @param BusinessCode: 产品名称代码
# 备注：如需获取当月使用过的BusinessCode，请调用API：获取产品汇总费用分布
# @type BusinessCode: String
# @param Context: 上一次请求返回的上下文信息，翻页查询Month>=2023-05的月份的数据可加快查询速度，数据量10万级别以上的用户建议使用，查询速度可提升2~10倍
# @type Context: String
# @param PayerUin: 支付者的账号 ID（账号 ID 是用户在腾讯云的唯一账号标识），默认查询本账号账单，如集团管理账号需查询成员账号自付的账单，该字段需入参成员账号UIN
# @type PayerUin: String
attr_accessor :Offset, :Limit, :PeriodType, :Month, :BeginTime, :EndTime, :NeedRecordNum, :ProductCode, :PayMode, :ResourceId, :ActionType, :ProjectId, :BusinessCode, :Context, :PayerUin
extend Gem::Deprecate
deprecate :PeriodType, :none, 2023, 11
deprecate :PeriodType=, :none, 2023, 11
def initialize(offset=nil, limit=nil, periodtype=nil, month=nil, begintime=nil, endtime=nil, needrecordnum=nil, productcode=nil, paymode=nil, resourceid=nil, actiontype=nil, projectid=nil, businesscode=nil, context=nil, payeruin=nil)
@Offset = offset
@Limit = limit
@PeriodType = periodtype
@Month = month
@BeginTime = begintime
@EndTime = endtime
@NeedRecordNum = needrecordnum
@ProductCode = productcode
@PayMode = paymode
@ResourceId = resourceid
@ActionType = actiontype
@ProjectId = projectid
@BusinessCode = businesscode
@Context = context
@PayerUin = payeruin
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
@PeriodType = params['PeriodType']
@Month = params['Month']
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@NeedRecordNum = params['NeedRecordNum']
@ProductCode = params['ProductCode']
@PayMode = params['PayMode']
@ResourceId = params['ResourceId']
@ActionType = params['ActionType']
@ProjectId = params['ProjectId']
@BusinessCode = params['BusinessCode']
@Context = params['Context']
@PayerUin = params['PayerUin']
end
end
# DescribeBillDetail返回参数结构体
class DescribeBillDetailResponse < TencentCloud::Common::AbstractModel
# @param DetailSet: 详情列表
# @type DetailSet: Array
# @param Total: 总记录数，24小时缓存一次，可能比实际总记录数少
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param Context: 本次请求的上下文信息，可用于下一次请求的请求参数中，加快查询速度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Context: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DetailSet, :Total, :Context, :RequestId
def initialize(detailset=nil, total=nil, context=nil, requestid=nil)
@DetailSet = detailset
@Total = total
@Context = context
@RequestId = requestid
end
def deserialize(params)
unless params['DetailSet'].nil?
@DetailSet = []
params['DetailSet'].each do |i|
billdetail_tmp = BillDetail.new
billdetail_tmp.deserialize(i)
@DetailSet << billdetail_tmp
end
end
@Total = params['Total']
@Context = params['Context']
@RequestId = params['RequestId']
end
end
# DescribeBillDownloadUrl请求参数结构体
class DescribeBillDownloadUrlRequest < TencentCloud::Common::AbstractModel
# @param FileType: 账单类型，枚举值
# billOverview=L0-PDF账单
# billSummary=L1-汇总账单
# billResource=L2-资源账单
# billDetail=L3-明细账单
# billPack=账单包
# @type FileType: String
# @param Month: 账单月份
# 支持的最早开始月份为2021-01
# L0-PDF&账单包不支持当月下载，当月账单请在次月1号19:00出账后下载
# @type Month: String
# @param ChildUin: 下载的账号 ID列表，默认查询本账号账单，如集团管理账号需下载成员账号自付的账单，该字段需入参成员账号UIN
# @type ChildUin: Array
attr_accessor :FileType, :Month, :ChildUin
def initialize(filetype=nil, month=nil, childuin=nil)
@FileType = filetype
@Month = month
@ChildUin = childuin
end
def deserialize(params)
@FileType = params['FileType']
@Month = params['Month']
@ChildUin = params['ChildUin']
end
end
# DescribeBillDownloadUrl返回参数结构体
class DescribeBillDownloadUrlResponse < TencentCloud::Common::AbstractModel
# @param Ready: 账单文件是否准备就绪，0文件生成中，1文件已生成
# @type Ready: Integer
# @param DownloadUrl: 账单文件下载链接，有效时长为一小时
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :DownloadUrl, :RequestId
def initialize(ready=nil, downloadurl=nil, requestid=nil)
@Ready = ready
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeBillList请求参数结构体
class DescribeBillListRequest < TencentCloud::Common::AbstractModel
# @param StartTime: 查询范围的起始时间（包含）时间格式 yyyy-MM-dd HH:mm:ss 开始时间和结束时间差值小于等于六个月
# @type StartTime: String
# @param EndTime: 查询范围的结束时间（包含）时间格式 yyyy-MM-dd HH:mm:ss ，开始时间和结束时间差值小于等于六个月
# @type EndTime: String
# @param Offset: 翻页偏移量，初始值为0
# @type Offset: Integer
# @param Limit: 每页的限制数量
# @type Limit: Integer
# @param PayType: 交易类型： all所有交易类型，recharge充值，return退款，unblock解冻，agentin资金转入，advanced垫付，cash提现，deduct扣费，block冻结，agentout资金转出，repay垫付回款，repayment还款(仅国际信用账户)，adj_refund调增(仅国际信用账户)，adj_deduct调减(仅国际信用账户)
# @type PayType: Array
# @param SubPayType: 扣费模式，
# 当所选的交易类型为扣费deduct时：
# all所有扣费类型;trade预付费支付;hour_h按量小时结;hour_d按量日结;hour_m按量月结;decompensate调账扣费;other第三方扣费;panshi 线下项目扣费;offline 线下产品扣费;
# 当所选的交易类型为扣费recharge时：
# online 在线充值;bank-enterprice 银企直连;offline 线下充值;transfer 分成充值
# 当所选的交易类型为扣费cash时：
# online 线上提现;offline 线下提现;panshi 赠送金清零
# 当所选的交易类型为扣费advanced时：
# advanced 垫付充值
# 当所选的交易类型为扣费repay时：
# panshi 垫付回款
# 当所选的交易类型为扣费block时：
# other 第三方冻结;hour 按量冻结;month按月冻结
# 当所选的交易类型为扣费return时：
# compensate 调账补偿;trade 预付费退款
# 当所选的交易类型为扣费unblock时：
# other 第三方解冻;hour 按量解冻;month 按月解冻
# @type SubPayType: Array
# @param WithZeroAmount: 是否返回0元交易金额的交易项，取值：0-不返回，1-返回。不传该参数则不返回
# @type WithZeroAmount: Integer
attr_accessor :StartTime, :EndTime, :Offset, :Limit, :PayType, :SubPayType, :WithZeroAmount
def initialize(starttime=nil, endtime=nil, offset=nil, limit=nil, paytype=nil, subpaytype=nil, withzeroamount=nil)
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
@PayType = paytype
@SubPayType = subpaytype
@WithZeroAmount = withzeroamount
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
@PayType = params['PayType']
@SubPayType = params['SubPayType']
@WithZeroAmount = params['WithZeroAmount']
end
end
# DescribeBillList返回参数结构体
class DescribeBillListResponse < TencentCloud::Common::AbstractModel
# @param TransactionList: 收支明细列表
# @type TransactionList: Array
# @param Total: 总条数
# @type Total: Integer
# @param ReturnAmount: 退费总额，单位（分）
# @type ReturnAmount: Float
# @param RechargeAmount: 充值总额，单位（分）
# @type RechargeAmount: Float
# @param BlockAmount: 冻结总额，单位（分）
# @type BlockAmount: Float
# @param UnblockAmount: 解冻总额，单位（分）
# @type UnblockAmount: Float
# @param DeductAmount: 扣费总额，单位（分）
# @type DeductAmount: Float
# @param AgentInAmount: 资金转入总额，单位（分）
# @type AgentInAmount: Float
# @param AdvanceRechargeAmount: 垫付充值总额，单位（分）
# @type AdvanceRechargeAmount: Float
# @param WithdrawAmount: 提现扣减总额，单位（分）
# @type WithdrawAmount: Float
# @param AgentOutAmount: 资金转出总额，单位（分）
# @type AgentOutAmount: Float
# @param AdvancePayAmount: 还垫付总额，单位（分）
# @type AdvancePayAmount: Float
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TransactionList, :Total, :ReturnAmount, :RechargeAmount, :BlockAmount, :UnblockAmount, :DeductAmount, :AgentInAmount, :AdvanceRechargeAmount, :WithdrawAmount, :AgentOutAmount, :AdvancePayAmount, :RequestId
def initialize(transactionlist=nil, total=nil, returnamount=nil, rechargeamount=nil, blockamount=nil, unblockamount=nil, deductamount=nil, agentinamount=nil, advancerechargeamount=nil, withdrawamount=nil, agentoutamount=nil, advancepayamount=nil, requestid=nil)
@TransactionList = transactionlist
@Total = total
@ReturnAmount = returnamount
@RechargeAmount = rechargeamount
@BlockAmount = blockamount
@UnblockAmount = unblockamount
@DeductAmount = deductamount
@AgentInAmount = agentinamount
@AdvanceRechargeAmount = advancerechargeamount
@WithdrawAmount = withdrawamount
@AgentOutAmount = agentoutamount
@AdvancePayAmount = advancepayamount
@RequestId = requestid
end
def deserialize(params)
unless params['TransactionList'].nil?
@TransactionList = []
params['TransactionList'].each do |i|
billtransactioninfo_tmp = BillTransactionInfo.new
billtransactioninfo_tmp.deserialize(i)
@TransactionList << billtransactioninfo_tmp
end
end
@Total = params['Total']
@ReturnAmount = params['ReturnAmount']
@RechargeAmount = params['RechargeAmount']
@BlockAmount = params['BlockAmount']
@UnblockAmount = params['UnblockAmount']
@DeductAmount = params['DeductAmount']
@AgentInAmount = params['AgentInAmount']
@AdvanceRechargeAmount = params['AdvanceRechargeAmount']
@WithdrawAmount = params['WithdrawAmount']
@AgentOutAmount = params['AgentOutAmount']
@AdvancePayAmount = params['AdvancePayAmount']
@RequestId = params['RequestId']
end
end
# DescribeBillResourceSummaryForOrganization请求参数结构体
class DescribeBillResourceSummaryForOrganizationRequest < TencentCloud::Common::AbstractModel
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，依次类推
# @type Offset: Integer
# @param Limit: 数量，最大值为1000
# @type Limit: Integer
# @param Month: 月份，格式为yyyy-mm。不能早于开通账单2.0的月份
# @type Month: String
# @param PeriodType: 周期类型，byUsedTime按计费周期/byPayTime按扣费周期。需要与费用中心该月份账单的周期保持一致。您可前往[账单概览](https://console.cloud.tencent.com/expense/bill/overview)页面顶部查看确认您的账单统计周期类型。
# @type PeriodType: String
# @param NeedRecordNum: 是否需要访问列表的总记录数，用于前端分页
# 1-表示需要， 0-表示不需要
# @type NeedRecordNum: Integer
# @param ActionType: 查询交易类型（请使用交易类型名称入参），入参示例枚举如下：
# 包年包月新购
# 包年包月续费
# 包年包月配置变更
# 包年包月退款
# 按量计费扣费
# 线下项目扣费
# 线下产品扣费
# 调账扣费
# 调账补偿
# 按量计费小时结
# 按量计费日结
# 按量计费月结
# 竞价实例小时结
# 线下项目调账补偿
# 线下产品调账补偿
# 优惠扣费
# 优惠补偿
# 按量计费迁入资源
# 按量计费迁出资源
# 包年包月迁入资源
# 包年包月迁出资源
# 预付费用
# 小时费用
# 预留实例退款
# 按量计费冲正
# 包年包月转按量
# 保底扣款
# 节省计划小时费用
# @type ActionType: String
# @param ResourceId: 查询指定资源信息
# @type ResourceId: String
# @param PayMode: 付费模式 prePay/postPay
# @type PayMode: String
# @param BusinessCode: 产品名称代码
# 备注：如需获取当月使用过的BusinessCode，请调用API：获取产品汇总费用分布
# @type BusinessCode: String
# @param TagKey: 分账标签键，用户自定义（支持2021-01以后账单查询）
# @type TagKey: String
# @param TagValue: 分账标签值，该参数为空表示该标签键下未设置标签值的记录
# （支持2021-01以后账单查询）
# @type TagValue: String
attr_accessor :Offset, :Limit, :Month, :PeriodType, :NeedRecordNum, :ActionType, :ResourceId, :PayMode, :BusinessCode, :TagKey, :TagValue
extend Gem::Deprecate
deprecate :PeriodType, :none, 2023, 11
deprecate :PeriodType=, :none, 2023, 11
def initialize(offset=nil, limit=nil, month=nil, periodtype=nil, needrecordnum=nil, actiontype=nil, resourceid=nil, paymode=nil, businesscode=nil, tagkey=nil, tagvalue=nil)
@Offset = offset
@Limit = limit
@Month = month
@PeriodType = periodtype
@NeedRecordNum = needrecordnum
@ActionType = actiontype
@ResourceId = resourceid
@PayMode = paymode
@BusinessCode = businesscode
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
@Month = params['Month']
@PeriodType = params['PeriodType']
@NeedRecordNum = params['NeedRecordNum']
@ActionType = params['ActionType']
@ResourceId = params['ResourceId']
@PayMode = params['PayMode']
@BusinessCode = params['BusinessCode']
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# DescribeBillResourceSummaryForOrganization返回参数结构体
class DescribeBillResourceSummaryForOrganizationResponse < TencentCloud::Common::AbstractModel
# @param ResourceSummarySet: 资源汇总列表
# @type ResourceSummarySet: Array
# @param Total: 资源汇总列表总数，入参NeedRecordNum为0时不返回
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResourceSummarySet, :Total, :RequestId
def initialize(resourcesummaryset=nil, total=nil, requestid=nil)
@ResourceSummarySet = resourcesummaryset
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['ResourceSummarySet'].nil?
@ResourceSummarySet = []
params['ResourceSummarySet'].each do |i|
billdistributionresourcesummary_tmp = BillDistributionResourceSummary.new
billdistributionresourcesummary_tmp.deserialize(i)
@ResourceSummarySet << billdistributionresourcesummary_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeBillResourceSummary请求参数结构体
class DescribeBillResourceSummaryRequest < TencentCloud::Common::AbstractModel
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，依次类推
# @type Offset: Integer
# @param Limit: 数量，最大值为1000
# @type Limit: Integer
# @param Month: 月份，格式为yyyy-mm。不能早于开通账单2.0的月份
# @type Month: String
# @param PeriodType: 周期类型，byUsedTime按计费周期/byPayTime按扣费周期。需要与费用中心该月份账单的周期保持一致。您可前往[账单概览](https://console.cloud.tencent.com/expense/bill/overview)页面顶部查看确认您的账单统计周期类型。
# @type PeriodType: String
# @param NeedRecordNum: 是否需要访问列表的总记录数，用于前端分页
# 1-表示需要， 0-表示不需要
# @type NeedRecordNum: Integer
# @param ActionType: 查询交易类型（请使用交易类型名称入参），入参示例枚举如下：
# 包年包月新购
# 包年包月续费
# 包年包月配置变更
# 包年包月退款
# 按量计费扣费
# 线下项目扣费
# 线下产品扣费
# 调账扣费
# 调账补偿
# 按量计费小时结
# 按量计费日结
# 按量计费月结
# 竞价实例小时结
# 线下项目调账补偿
# 线下产品调账补偿
# 优惠扣费
# 优惠补偿
# 按量计费迁入资源
# 按量计费迁出资源
# 包年包月迁入资源
# 包年包月迁出资源
# 预付费用
# 小时费用
# 预留实例退款
# 按量计费冲正
# 包年包月转按量
# 保底扣款
# 节省计划小时费用
# @type ActionType: String
# @param ResourceId: 查询指定资源信息
# @type ResourceId: String
# @param PayMode: 付费模式 prePay/postPay
# @type PayMode: String
# @param BusinessCode: 产品名称代码
# 备注：如需获取当月使用过的BusinessCode，请调用API：获取产品汇总费用分布
# @type BusinessCode: String
# @param PayerUin: 支付者的账号 ID（账号 ID 是用户在腾讯云的唯一账号标识），默认查询本账号账单，如集团管理账号需查询成员账号自付的账单，该字段需入参成员账号UIN
# @type PayerUin: String
# @param TagKey: 分账标签键，用户自定义（支持2021-01以后账单查询）
# @type TagKey: String
# @param TagValue: 分账标签值，该参数为空表示该标签键下未设置标签值的记录
# （支持2021-01以后账单查询）
# @type TagValue: String
attr_accessor :Offset, :Limit, :Month, :PeriodType, :NeedRecordNum, :ActionType, :ResourceId, :PayMode, :BusinessCode, :PayerUin, :TagKey, :TagValue
extend Gem::Deprecate
deprecate :PeriodType, :none, 2023, 11
deprecate :PeriodType=, :none, 2023, 11
def initialize(offset=nil, limit=nil, month=nil, periodtype=nil, needrecordnum=nil, actiontype=nil, resourceid=nil, paymode=nil, businesscode=nil, payeruin=nil, tagkey=nil, tagvalue=nil)
@Offset = offset
@Limit = limit
@Month = month
@PeriodType = periodtype
@NeedRecordNum = needrecordnum
@ActionType = actiontype
@ResourceId = resourceid
@PayMode = paymode
@BusinessCode = businesscode
@PayerUin = payeruin
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
@Month = params['Month']
@PeriodType = params['PeriodType']
@NeedRecordNum = params['NeedRecordNum']
@ActionType = params['ActionType']
@ResourceId = params['ResourceId']
@PayMode = params['PayMode']
@BusinessCode = params['BusinessCode']
@PayerUin = params['PayerUin']
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# DescribeBillResourceSummary返回参数结构体
class DescribeBillResourceSummaryResponse < TencentCloud::Common::AbstractModel
# @param ResourceSummarySet: 资源汇总列表
# @type ResourceSummarySet: Array
# @param Total: 资源汇总列表总数，入参NeedRecordNum为0时不返回
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResourceSummarySet, :Total, :RequestId
def initialize(resourcesummaryset=nil, total=nil, requestid=nil)
@ResourceSummarySet = resourcesummaryset
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['ResourceSummarySet'].nil?
@ResourceSummarySet = []
params['ResourceSummarySet'].each do |i|
billresourcesummary_tmp = BillResourceSummary.new
billresourcesummary_tmp.deserialize(i)
@ResourceSummarySet << billresourcesummary_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryByPayMode请求参数结构体
class DescribeBillSummaryByPayModeRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
attr_accessor :BeginTime, :EndTime, :PayerUin
def initialize(begintime=nil, endtime=nil, payeruin=nil)
@BeginTime = begintime
@EndTime = endtime
@PayerUin = payeruin
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@PayerUin = params['PayerUin']
end
end
# DescribeBillSummaryByPayMode返回参数结构体
class DescribeBillSummaryByPayModeResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryOverview: 各付费模式花费分布详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryOverview: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryOverview, :RequestId
def initialize(ready=nil, summaryoverview=nil, requestid=nil)
@Ready = ready
@SummaryOverview = summaryoverview
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryOverview'].nil?
@SummaryOverview = []
params['SummaryOverview'].each do |i|
paymodesummaryoverviewitem_tmp = PayModeSummaryOverviewItem.new
paymodesummaryoverviewitem_tmp.deserialize(i)
@SummaryOverview << paymodesummaryoverviewitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryByProduct请求参数结构体
class DescribeBillSummaryByProductRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param PayType: 款项类别，与L0账单上的汇总类别对应。
# 此参数自账单3.0（即2021-05）之后开始生效。
# 枚举值：
# consume-消费
# refund-退款
# adjustment-调账
# @type PayType: String
attr_accessor :BeginTime, :EndTime, :PayerUin, :PayType
def initialize(begintime=nil, endtime=nil, payeruin=nil, paytype=nil)
@BeginTime = begintime
@EndTime = endtime
@PayerUin = payeruin
@PayType = paytype
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@PayerUin = params['PayerUin']
@PayType = params['PayType']
end
end
# DescribeBillSummaryByProduct返回参数结构体
class DescribeBillSummaryByProductResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryTotal: 总花费详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryTotal: :class:`Tencentcloud::Billing.v20180709.models.BusinessSummaryTotal`
# @param SummaryOverview: 各产品花费分布
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryOverview: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryTotal, :SummaryOverview, :RequestId
def initialize(ready=nil, summarytotal=nil, summaryoverview=nil, requestid=nil)
@Ready = ready
@SummaryTotal = summarytotal
@SummaryOverview = summaryoverview
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryTotal'].nil?
@SummaryTotal = BusinessSummaryTotal.new
@SummaryTotal.deserialize(params['SummaryTotal'])
end
unless params['SummaryOverview'].nil?
@SummaryOverview = []
params['SummaryOverview'].each do |i|
businesssummaryoverviewitem_tmp = BusinessSummaryOverviewItem.new
businesssummaryoverviewitem_tmp.deserialize(i)
@SummaryOverview << businesssummaryoverviewitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryByProject请求参数结构体
class DescribeBillSummaryByProjectRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
attr_accessor :BeginTime, :EndTime, :PayerUin
def initialize(begintime=nil, endtime=nil, payeruin=nil)
@BeginTime = begintime
@EndTime = endtime
@PayerUin = payeruin
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@PayerUin = params['PayerUin']
end
end
# DescribeBillSummaryByProject返回参数结构体
class DescribeBillSummaryByProjectResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryOverview: 各项目花费分布详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryOverview: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryOverview, :RequestId
def initialize(ready=nil, summaryoverview=nil, requestid=nil)
@Ready = ready
@SummaryOverview = summaryoverview
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryOverview'].nil?
@SummaryOverview = []
params['SummaryOverview'].each do |i|
projectsummaryoverviewitem_tmp = ProjectSummaryOverviewItem.new
projectsummaryoverviewitem_tmp.deserialize(i)
@SummaryOverview << projectsummaryoverviewitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryByRegion请求参数结构体
class DescribeBillSummaryByRegionRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
attr_accessor :BeginTime, :EndTime, :PayerUin
def initialize(begintime=nil, endtime=nil, payeruin=nil)
@BeginTime = begintime
@EndTime = endtime
@PayerUin = payeruin
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@PayerUin = params['PayerUin']
end
end
# DescribeBillSummaryByRegion返回参数结构体
class DescribeBillSummaryByRegionResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryOverview: 各地域花费分布详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryOverview: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryOverview, :RequestId
def initialize(ready=nil, summaryoverview=nil, requestid=nil)
@Ready = ready
@SummaryOverview = summaryoverview
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryOverview'].nil?
@SummaryOverview = []
params['SummaryOverview'].each do |i|
regionsummaryoverviewitem_tmp = RegionSummaryOverviewItem.new
regionsummaryoverviewitem_tmp.deserialize(i)
@SummaryOverview << regionsummaryoverviewitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryByTag请求参数结构体
class DescribeBillSummaryByTagRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param TagKey: 分账标签键，用户自定义
# @type TagKey: String
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param TagValue: 分账标签值
# @type TagValue: String
attr_accessor :BeginTime, :EndTime, :TagKey, :PayerUin, :TagValue
def initialize(begintime=nil, endtime=nil, tagkey=nil, payeruin=nil, tagvalue=nil)
@BeginTime = begintime
@EndTime = endtime
@TagKey = tagkey
@PayerUin = payeruin
@TagValue = tagvalue
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@TagKey = params['TagKey']
@PayerUin = params['PayerUin']
@TagValue = params['TagValue']
end
end
# DescribeBillSummaryByTag返回参数结构体
class DescribeBillSummaryByTagResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryOverview: 各标签值花费分布详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryOverview: Array
# @param SummaryTotal: 总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SummaryTotal: :class:`Tencentcloud::Billing.v20180709.models.SummaryTotal`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryOverview, :SummaryTotal, :RequestId
def initialize(ready=nil, summaryoverview=nil, summarytotal=nil, requestid=nil)
@Ready = ready
@SummaryOverview = summaryoverview
@SummaryTotal = summarytotal
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryOverview'].nil?
@SummaryOverview = []
params['SummaryOverview'].each do |i|
tagsummaryoverviewitem_tmp = TagSummaryOverviewItem.new
tagsummaryoverviewitem_tmp.deserialize(i)
@SummaryOverview << tagsummaryoverviewitem_tmp
end
end
unless params['SummaryTotal'].nil?
@SummaryTotal = SummaryTotal.new
@SummaryTotal.deserialize(params['SummaryTotal'])
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummaryForOrganization请求参数结构体
class DescribeBillSummaryForOrganizationRequest < TencentCloud::Common::AbstractModel
# @param Month: 账单月份，格式为2023-04
# @type Month: String
# @param GroupType: 账单维度类型，枚举值如下：business、project、region、payMode、tag
# @type GroupType: String
# @param TagKey: 标签键，GroupType=tag获取标签维度账单时传
# @type TagKey: Array
attr_accessor :Month, :GroupType, :TagKey
def initialize(month=nil, grouptype=nil, tagkey=nil)
@Month = month
@GroupType = grouptype
@TagKey = tagkey
end
def deserialize(params)
@Month = params['Month']
@GroupType = params['GroupType']
@TagKey = params['TagKey']
end
end
# DescribeBillSummaryForOrganization返回参数结构体
class DescribeBillSummaryForOrganizationResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryDetail: 账单多维度汇总消费详情
# @type SummaryDetail: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryDetail, :RequestId
def initialize(ready=nil, summarydetail=nil, requestid=nil)
@Ready = ready
@SummaryDetail = summarydetail
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryDetail'].nil?
@SummaryDetail = []
params['SummaryDetail'].each do |i|
summarydetail_tmp = SummaryDetail.new
summarydetail_tmp.deserialize(i)
@SummaryDetail << summarydetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBillSummary请求参数结构体
class DescribeBillSummaryRequest < TencentCloud::Common::AbstractModel
# @param Month: 账单月份，格式为2023-04
# @type Month: String
# @param GroupType: 账单维度类型，枚举值如下：business、project、region、payMode、tag
# @type GroupType: String
# @param TagKey: 标签键，GroupType=tag获取标签维度账单时传
# @type TagKey: Array
attr_accessor :Month, :GroupType, :TagKey
def initialize(month=nil, grouptype=nil, tagkey=nil)
@Month = month
@GroupType = grouptype
@TagKey = tagkey
end
def deserialize(params)
@Month = params['Month']
@GroupType = params['GroupType']
@TagKey = params['TagKey']
end
end
# DescribeBillSummary返回参数结构体
class DescribeBillSummaryResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0准备中，1已就绪。（Ready=0，为当前UIN首次进行初始化出账，预计需要5~10分钟出账，请于10分钟后重试即可）
# @type Ready: Integer
# @param SummaryDetail: 账单多维度汇总消费详情
# @type SummaryDetail: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :SummaryDetail, :RequestId
def initialize(ready=nil, summarydetail=nil, requestid=nil)
@Ready = ready
@SummaryDetail = summarydetail
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['SummaryDetail'].nil?
@SummaryDetail = []
params['SummaryDetail'].each do |i|
summarydetail_tmp = SummaryDetail.new
summarydetail_tmp.deserialize(i)
@SummaryDetail << summarydetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCostDetail请求参数结构体
class DescribeCostDetailRequest < TencentCloud::Common::AbstractModel
# @param Limit: 数量，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param BeginTime: 周期开始时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为同一月份，暂不支持跨月拉取。可拉取的数据是开通成本分析后，且距今 24 个月内的数据。
# @type BeginTime: String
# @param EndTime: 周期结束时间，格式为yyyy-mm-dd hh:ii:ss，Month和BeginTime&EndTime必传一个，如果有该字段则Month字段无效。BeginTime和EndTime必须一起传，且为同一月份，暂不支持跨月拉取。可拉取的数据是开通成本分析后，且距今 24 个月内的数据。
# @type EndTime: String
# @param NeedRecordNum: 是否需要访问列表的总记录数，用于前端分页
# 1-表示需要， 0-表示不需要
# @type NeedRecordNum: Integer
# @param Month: 月份，格式为yyyy-mm，Month和BeginTime&EndTime必传一个，如果有传BeginTime&EndTime则Month字段无效。不能早于开通成本分析的月份，最多可拉取24个月内的数据。
# @type Month: String
# @param ProductCode: 查询指定产品信息（暂时未开放获取）
# @type ProductCode: String
# @param PayMode: 付费模式 prePay/postPay
# @type PayMode: String
# @param ResourceId: 查询指定资源信息
# @type ResourceId: String
attr_accessor :Limit, :Offset, :BeginTime, :EndTime, :NeedRecordNum, :Month, :ProductCode, :PayMode, :ResourceId
def initialize(limit=nil, offset=nil, begintime=nil, endtime=nil, needrecordnum=nil, month=nil, productcode=nil, paymode=nil, resourceid=nil)
@Limit = limit
@Offset = offset
@BeginTime = begintime
@EndTime = endtime
@NeedRecordNum = needrecordnum
@Month = month
@ProductCode = productcode
@PayMode = paymode
@ResourceId = resourceid
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@NeedRecordNum = params['NeedRecordNum']
@Month = params['Month']
@ProductCode = params['ProductCode']
@PayMode = params['PayMode']
@ResourceId = params['ResourceId']
end
end
# DescribeCostDetail返回参数结构体
class DescribeCostDetailResponse < TencentCloud::Common::AbstractModel
# @param DetailSet: 消耗明细
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DetailSet: Array
# @param Total: 记录数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DetailSet, :Total, :RequestId
def initialize(detailset=nil, total=nil, requestid=nil)
@DetailSet = detailset
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['DetailSet'].nil?
@DetailSet = []
params['DetailSet'].each do |i|
costdetail_tmp = CostDetail.new
costdetail_tmp.deserialize(i)
@DetailSet << costdetail_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeCostSummaryByProduct请求参数结构体
class DescribeCostSummaryByProductRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param Limit: 每次获取数据量，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量,默认从0开始
# @type Offset: Integer
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param NeedRecordNum: 是否需要返回记录数量，0不需要，1需要，默认不需要
# @type NeedRecordNum: Integer
attr_accessor :BeginTime, :EndTime, :Limit, :Offset, :PayerUin, :NeedRecordNum
def initialize(begintime=nil, endtime=nil, limit=nil, offset=nil, payeruin=nil, needrecordnum=nil)
@BeginTime = begintime
@EndTime = endtime
@Limit = limit
@Offset = offset
@PayerUin = payeruin
@NeedRecordNum = needrecordnum
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@PayerUin = params['PayerUin']
@NeedRecordNum = params['NeedRecordNum']
end
end
# DescribeCostSummaryByProduct返回参数结构体
class DescribeCostSummaryByProductResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0未准备好，1准备好
# @type Ready: Integer
# @param Total: 消耗详情
# @type Total: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTotal`
# @param Data: 消耗按产品汇总详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Data: Array
# @param RecordNum: 记录数量，NeedRecordNum为0是返回null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordNum: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :Total, :Data, :RecordNum, :RequestId
def initialize(ready=nil, total=nil, data=nil, recordnum=nil, requestid=nil)
@Ready = ready
@Total = total
@Data = data
@RecordNum = recordnum
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['Total'].nil?
@Total = ConsumptionSummaryTotal.new
@Total.deserialize(params['Total'])
end
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
consumptionbusinesssummarydataitem_tmp = ConsumptionBusinessSummaryDataItem.new
consumptionbusinesssummarydataitem_tmp.deserialize(i)
@Data << consumptionbusinesssummarydataitem_tmp
end
end
@RecordNum = params['RecordNum']
@RequestId = params['RequestId']
end
end
# DescribeCostSummaryByProject请求参数结构体
class DescribeCostSummaryByProjectRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param Limit: 每次获取数据量，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量,默认从0开始
# @type Offset: Integer
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param NeedRecordNum: 是否需要返回记录数量，0不需要，1需要，默认不需要
# @type NeedRecordNum: Integer
attr_accessor :BeginTime, :EndTime, :Limit, :Offset, :PayerUin, :NeedRecordNum
def initialize(begintime=nil, endtime=nil, limit=nil, offset=nil, payeruin=nil, needrecordnum=nil)
@BeginTime = begintime
@EndTime = endtime
@Limit = limit
@Offset = offset
@PayerUin = payeruin
@NeedRecordNum = needrecordnum
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@PayerUin = params['PayerUin']
@NeedRecordNum = params['NeedRecordNum']
end
end
# DescribeCostSummaryByProject返回参数结构体
class DescribeCostSummaryByProjectResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0未准备好，1准备好
# @type Ready: Integer
# @param Total: 消耗详情
# @type Total: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTotal`
# @param Data: 消耗按业务汇总详情
# @type Data: Array
# @param RecordNum: 记录数量，NeedRecordNum为0是返回null
# @type RecordNum: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :Total, :Data, :RecordNum, :RequestId
def initialize(ready=nil, total=nil, data=nil, recordnum=nil, requestid=nil)
@Ready = ready
@Total = total
@Data = data
@RecordNum = recordnum
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['Total'].nil?
@Total = ConsumptionSummaryTotal.new
@Total.deserialize(params['Total'])
end
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
consumptionprojectsummarydataitem_tmp = ConsumptionProjectSummaryDataItem.new
consumptionprojectsummarydataitem_tmp.deserialize(i)
@Data << consumptionprojectsummarydataitem_tmp
end
end
@RecordNum = params['RecordNum']
@RequestId = params['RequestId']
end
end
# DescribeCostSummaryByRegion请求参数结构体
class DescribeCostSummaryByRegionRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param Limit: 每次获取数据量，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量,默认从0开始
# @type Offset: Integer
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param NeedRecordNum: 是否需要返回记录数量，0不需要，1需要，默认不需要
# @type NeedRecordNum: Integer
attr_accessor :BeginTime, :EndTime, :Limit, :Offset, :PayerUin, :NeedRecordNum
def initialize(begintime=nil, endtime=nil, limit=nil, offset=nil, payeruin=nil, needrecordnum=nil)
@BeginTime = begintime
@EndTime = endtime
@Limit = limit
@Offset = offset
@PayerUin = payeruin
@NeedRecordNum = needrecordnum
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@PayerUin = params['PayerUin']
@NeedRecordNum = params['NeedRecordNum']
end
end
# DescribeCostSummaryByRegion返回参数结构体
class DescribeCostSummaryByRegionResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0未准备好，1准备好
# @type Ready: Integer
# @param Total: 消耗详情
# @type Total: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTotal`
# @param Data: 消耗按地域汇总详情
# @type Data: Array
# @param RecordNum: 记录数量，NeedRecordNum为0是返回null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordNum: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :Total, :Data, :RecordNum, :RequestId
def initialize(ready=nil, total=nil, data=nil, recordnum=nil, requestid=nil)
@Ready = ready
@Total = total
@Data = data
@RecordNum = recordnum
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['Total'].nil?
@Total = ConsumptionSummaryTotal.new
@Total.deserialize(params['Total'])
end
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
consumptionregionsummarydataitem_tmp = ConsumptionRegionSummaryDataItem.new
consumptionregionsummarydataitem_tmp.deserialize(i)
@Data << consumptionregionsummarydataitem_tmp
end
end
@RecordNum = params['RecordNum']
@RequestId = params['RequestId']
end
end
# DescribeCostSummaryByResource请求参数结构体
class DescribeCostSummaryByResourceRequest < TencentCloud::Common::AbstractModel
# @param BeginTime: 目前必须和EndTime相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type BeginTime: String
# @param EndTime: 目前必须和BeginTime为相同月份，不支持跨月查询，且查询结果是整月数据，例如 BeginTime为2018-09，EndTime 为 2018-09，查询结果是 2018 年 9 月数据。
# @type EndTime: String
# @param Limit: 每次获取数据量，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量,默认从0开始
# @type Offset: Integer
# @param PayerUin: 查询账单数据的用户UIN
# @type PayerUin: String
# @param NeedRecordNum: 是否需要返回记录数量，0不需要，1需要，默认不需要
# @type NeedRecordNum: Integer
# @param NeedConditionValue: 是否需要返回过滤条件，0不需要，1需要，默认不需要
# @type NeedConditionValue: Integer
# @param Conditions: 过滤条件，只支持ResourceKeyword(资源关键字，支持资源id及资源名称模糊查询)，ProjectIds（项目id），RegionIds(地域id)，PayModes(付费模式，可选prePay和postPay)，HideFreeCost（是否隐藏0元流水，可选0和1），OrderByCost（按费用排序规则，可选desc和asc）
# @type Conditions: :class:`Tencentcloud::Billing.v20180709.models.Conditions`
attr_accessor :BeginTime, :EndTime, :Limit, :Offset, :PayerUin, :NeedRecordNum, :NeedConditionValue, :Conditions
def initialize(begintime=nil, endtime=nil, limit=nil, offset=nil, payeruin=nil, needrecordnum=nil, needconditionvalue=nil, conditions=nil)
@BeginTime = begintime
@EndTime = endtime
@Limit = limit
@Offset = offset
@PayerUin = payeruin
@NeedRecordNum = needrecordnum
@NeedConditionValue = needconditionvalue
@Conditions = conditions
end
def deserialize(params)
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@PayerUin = params['PayerUin']
@NeedRecordNum = params['NeedRecordNum']
@NeedConditionValue = params['NeedConditionValue']
unless params['Conditions'].nil?
@Conditions = Conditions.new
@Conditions.deserialize(params['Conditions'])
end
end
end
# DescribeCostSummaryByResource返回参数结构体
class DescribeCostSummaryByResourceResponse < TencentCloud::Common::AbstractModel
# @param Ready: 数据是否准备好，0未准备好，1准备好
# @type Ready: Integer
# @param Total: 消耗详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionSummaryTotal`
# @param ConditionValue: 过滤条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionValue: :class:`Tencentcloud::Billing.v20180709.models.ConsumptionResourceSummaryConditionValue`
# @param RecordNum: 记录数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecordNum: Integer
# @param Data: 资源消耗详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Data: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ready, :Total, :ConditionValue, :RecordNum, :Data, :RequestId
def initialize(ready=nil, total=nil, conditionvalue=nil, recordnum=nil, data=nil, requestid=nil)
@Ready = ready
@Total = total
@ConditionValue = conditionvalue
@RecordNum = recordnum
@Data = data
@RequestId = requestid
end
def deserialize(params)
@Ready = params['Ready']
unless params['Total'].nil?
@Total = ConsumptionSummaryTotal.new
@Total.deserialize(params['Total'])
end
unless params['ConditionValue'].nil?
@ConditionValue = ConsumptionResourceSummaryConditionValue.new
@ConditionValue.deserialize(params['ConditionValue'])
end
@RecordNum = params['RecordNum']
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
consumptionresourcesummarydataitem_tmp = ConsumptionResourceSummaryDataItem.new
consumptionresourcesummarydataitem_tmp.deserialize(i)
@Data << consumptionresourcesummarydataitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDealsByCond请求参数结构体
class DescribeDealsByCondRequest < TencentCloud::Common::AbstractModel
# @param StartTime: 开始时间 2016-01-01 00:00:00
# @type StartTime: String
# @param EndTime: 结束时间 2016-02-01 00:00:00 建议跨度不超过3个月
# @type EndTime: String
# @param Limit: 一页多少条数据，默认是20条，最大不超过1000
# @type Limit: Integer
# @param Offset: 第多少页，从0开始，默认是0
# @type Offset: Integer
# @param Status: 订单状态,默认为4（成功的订单）
# 订单的状态
# 1：未支付
# 2：已支付3：发货中
# 4：已发货
# 5：发货失败
# 6：已退款
# 7：已关单
# 8：订单过期
# 9：订单已失效
# 10：产品已失效
# 11：代付拒绝
# 12：支付中
# @type Status: Integer
# @param OrderId: 订单号
# @type OrderId: String
# @param BigDealId: 大订单号
# @type BigDealId: String
# @param ResourceId: 资源id
# @type ResourceId: String
attr_accessor :StartTime, :EndTime, :Limit, :Offset, :Status, :OrderId, :BigDealId, :ResourceId
def initialize(starttime=nil, endtime=nil, limit=nil, offset=nil, status=nil, orderid=nil, bigdealid=nil, resourceid=nil)
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@Status = status
@OrderId = orderid
@BigDealId = bigdealid
@ResourceId = resourceid
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@Status = params['Status']
@OrderId = params['OrderId']
@BigDealId = params['BigDealId']
@ResourceId = params['ResourceId']
end
end
# DescribeDealsByCond返回参数结构体
class DescribeDealsByCondResponse < TencentCloud::Common::AbstractModel
# @param Deals: 订单列表
# @type Deals: Array
# @param TotalCount: 订单总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Deals, :TotalCount, :RequestId
def initialize(deals=nil, totalcount=nil, requestid=nil)
@Deals = deals
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['Deals'].nil?
@Deals = []
params['Deals'].each do |i|
deal_tmp = Deal.new
deal_tmp.deserialize(i)
@Deals << deal_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDosageCosDetailByDate请求参数结构体
class DescribeDosageCosDetailByDateRequest < TencentCloud::Common::AbstractModel
# @param StartDate: 查询用量开始时间，例如：2020-09-01
# @type StartDate: String
# @param EndDate: 查询用量结束时间，例如：2020-09-30（与开始时间同月，不支持跨月查询）
# @type EndDate: String
# @param BucketName: COS 存储桶名称，可通过Get Service 接口是用来获取请求者名下的所有存储空间列表（Bucket list）https://cloud.tencent.com/document/product/436/8291
# @type BucketName: String
attr_accessor :StartDate, :EndDate, :BucketName
def initialize(startdate=nil, enddate=nil, bucketname=nil)
@StartDate = startdate
@EndDate = enddate
@BucketName = bucketname
end
def deserialize(params)
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@BucketName = params['BucketName']
end
end
# DescribeDosageCosDetailByDate返回参数结构体
class DescribeDosageCosDetailByDateResponse < TencentCloud::Common::AbstractModel
# @param DetailSets: 用量数组
# @type DetailSets: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DetailSets, :RequestId
def initialize(detailsets=nil, requestid=nil)
@DetailSets = detailsets
@RequestId = requestid
end
def deserialize(params)
unless params['DetailSets'].nil?
@DetailSets = []
params['DetailSets'].each do |i|
cosdetailsets_tmp = CosDetailSets.new
cosdetailsets_tmp.deserialize(i)
@DetailSets << cosdetailsets_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDosageDetailByDate请求参数结构体
class DescribeDosageDetailByDateRequest < TencentCloud::Common::AbstractModel
# @param StartDate: 查询账单开始日期，如 2019-01-01
# @type StartDate: String
# @param EndDate: 查询账单结束日期，如 2019-01-01， 时间跨度不超过7天
# @type EndDate: String
# @param ProductCode: 互动直播：
# 10194 互动直播-核心机房 :
# 10195 互动直播-边缘机房
# cdn业务：
# 102383：CDN静态加速流量(国内)
# 102384：CDN静态加速带宽(国内)
# 102385：CDN静态加速流量(海外)
# 102386：CDN静态加速带宽(海外)
# 100967：弹性公网IP-按流量计费
# 101065：公网负载均衡-按流量计费
# 视频直播
# 10226 视频直播流量(国内)
# 10227 视频直播带宽(国内)
# 100763 视频直播流量(海外)
# 100762 视频直播宽带(海外)
# @type ProductCode: String
# @param Domain: 查询域名 例如 www.qq.com
# 非CDN业务查询时传入空字符串，返回的值为空
# @type Domain: String
# @param InstanceID: 1、如果为空，则返回EIP或CLB所有实例的明细；
# 2、如果传入实例名，则返回该实例明细
# @type InstanceID: String
attr_accessor :StartDate, :EndDate, :ProductCode, :Domain, :InstanceID
def initialize(startdate=nil, enddate=nil, productcode=nil, domain=nil, instanceid=nil)
@StartDate = startdate
@EndDate = enddate
@ProductCode = productcode
@Domain = domain
@InstanceID = instanceid
end
def deserialize(params)
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@ProductCode = params['ProductCode']
@Domain = params['Domain']
@InstanceID = params['InstanceID']
end
end
# DescribeDosageDetailByDate返回参数结构体
class DescribeDosageDetailByDateResponse < TencentCloud::Common::AbstractModel
# @param Unit: 计量单位
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Unit: String
# @param DetailSets: 用量数组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DetailSets: Array
# @param RetCode: 错误码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RetCode: Integer
# @param RetMsg: 错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RetMsg: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Unit, :DetailSets, :RetCode, :RetMsg, :RequestId
def initialize(unit=nil, detailsets=nil, retcode=nil, retmsg=nil, requestid=nil)
@Unit = unit
@DetailSets = detailsets
@RetCode = retcode
@RetMsg = retmsg
@RequestId = requestid
end
def deserialize(params)
@Unit = params['Unit']
unless params['DetailSets'].nil?
@DetailSets = []
params['DetailSets'].each do |i|
detailset_tmp = DetailSet.new
detailset_tmp.deserialize(i)
@DetailSets << detailset_tmp
end
end
@RetCode = params['RetCode']
@RetMsg = params['RetMsg']
@RequestId = params['RequestId']
end
end
# DescribeSavingPlanCoverage请求参数结构体
class DescribeSavingPlanCoverageRequest < TencentCloud::Common::AbstractModel
# @param StartDate: 费用起始日期，格式yyyy-MM-dd
# @type StartDate: String
# @param EndDate: 费用结束日期，格式yyyy-MM-dd
# @type EndDate: String
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，以此类推
# @type Offset: Integer
# @param Limit: 数量，最大值为200
# @type Limit: Integer
# @param PeriodType: 取值包括1（缺省值）和2，1表示按天统计覆盖率，2表示按月统计覆盖率，此参数仅影响返回的RateSet聚合粒度，不影响返回的DetailSet
# @type PeriodType: Integer
attr_accessor :StartDate, :EndDate, :Offset, :Limit, :PeriodType
def initialize(startdate=nil, enddate=nil, offset=nil, limit=nil, periodtype=nil)
@StartDate = startdate
@EndDate = enddate
@Offset = offset
@Limit = limit
@PeriodType = periodtype
end
def deserialize(params)
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@Offset = params['Offset']
@Limit = params['Limit']
@PeriodType = params['PeriodType']
end
end
# DescribeSavingPlanCoverage返回参数结构体
class DescribeSavingPlanCoverageResponse < TencentCloud::Common::AbstractModel
# @param DetailSet: 节省计划覆盖率明细数据
# @type DetailSet: Array
# @param RateSet: 节省计划覆盖率聚合数据
# @type RateSet: Array
# @param TotalCount: 查询命中的节省计划覆盖率明细数据总条数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DetailSet, :RateSet, :TotalCount, :RequestId
def initialize(detailset=nil, rateset=nil, totalcount=nil, requestid=nil)
@DetailSet = detailset
@RateSet = rateset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DetailSet'].nil?
@DetailSet = []
params['DetailSet'].each do |i|
savingplancoveragedetail_tmp = SavingPlanCoverageDetail.new
savingplancoveragedetail_tmp.deserialize(i)
@DetailSet << savingplancoveragedetail_tmp
end
end
unless params['RateSet'].nil?
@RateSet = []
params['RateSet'].each do |i|
savingplancoveragerate_tmp = SavingPlanCoverageRate.new
savingplancoveragerate_tmp.deserialize(i)
@RateSet << savingplancoveragerate_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeSavingPlanOverview请求参数结构体
class DescribeSavingPlanOverviewRequest < TencentCloud::Common::AbstractModel
# @param StartDate: 开始时间，格式yyyy-MM-dd 注：查询范围请勿超过6个月
# @type StartDate: String
# @param EndDate: 结束时间，格式yyyy-MM-dd
# @type EndDate: String
# @param Offset: 分页偏移量
# @type Offset: Integer
# @param Limit: 每页数量，最大值为200
# @type Limit: Integer
attr_accessor :StartDate, :EndDate, :Offset, :Limit
def initialize(startdate=nil, enddate=nil, offset=nil, limit=nil)
@StartDate = startdate
@EndDate = enddate
@Offset = offset
@Limit = limit
end
def deserialize(params)
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeSavingPlanOverview返回参数结构体
class DescribeSavingPlanOverviewResponse < TencentCloud::Common::AbstractModel
# @param Overviews: 节省计划总览明细数据
# @type Overviews: Array
# @param Total: 查询命中的节省计划总览明细数据总条数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Overviews, :Total, :RequestId
def initialize(overviews=nil, total=nil, requestid=nil)
@Overviews = overviews
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Overviews'].nil?
@Overviews = []
params['Overviews'].each do |i|
savingplanoverviewdetail_tmp = SavingPlanOverviewDetail.new
savingplanoverviewdetail_tmp.deserialize(i)
@Overviews << savingplanoverviewdetail_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeSavingPlanUsage请求参数结构体
class DescribeSavingPlanUsageRequest < TencentCloud::Common::AbstractModel
# @param StartDate: 开始时间，格式yyyy-MM-dd 注：查询范围请勿超过6个月
# @type StartDate: String
# @param EndDate: 结束时间，格式yyyy-MM-dd
# @type EndDate: String
# @param Offset: 分页偏移量
# @type Offset: Integer
# @param Limit: 每页数量，最大值为200
# @type Limit: Integer
# @param TimeInterval: 查询结果数据的时间间隔
# @type TimeInterval: String
attr_accessor :StartDate, :EndDate, :Offset, :Limit, :TimeInterval
def initialize(startdate=nil, enddate=nil, offset=nil, limit=nil, timeinterval=nil)
@StartDate = startdate
@EndDate = enddate
@Offset = offset
@Limit = limit
@TimeInterval = timeinterval
end
def deserialize(params)
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@Offset = params['Offset']
@Limit = params['Limit']
@TimeInterval = params['TimeInterval']
end
end
# DescribeSavingPlanUsage返回参数结构体
class DescribeSavingPlanUsageResponse < TencentCloud::Common::AbstractModel
# @param Usages: 节省计划使用率数据
# @type Usages: Array
# @param Total: 查询命中的节省计划总览明细数据总条数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Usages, :Total, :RequestId
def initialize(usages=nil, total=nil, requestid=nil)
@Usages = usages
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Usages'].nil?
@Usages = []
params['Usages'].each do |i|
savingplanusagedetail_tmp = SavingPlanUsageDetail.new
savingplanusagedetail_tmp.deserialize(i)
@Usages << savingplanusagedetail_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeTagList请求参数结构体
class DescribeTagListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 数量，最大值为1000
# @type Limit: Integer
# @param Offset: 分页偏移量，Offset=0表示第一页，如果Limit=100，则Offset=100表示第二页，Offset=200表示第三页，依次类推
# @type Offset: Integer
# @param TagKey: 分账标签键，用作模糊搜索
# @type TagKey: String
# @param Status: 标签类型，枚举值：0普通标签，1分账标签，用作筛选，不传获取全部标签键
# @type Status: Integer
# @param OrderType: 排序方式，枚举值：asc排升序，desc排降序
# @type OrderType: String
attr_accessor :Limit, :Offset, :TagKey, :Status, :OrderType
def initialize(limit=nil, offset=nil, tagkey=nil, status=nil, ordertype=nil)
@Limit = limit
@Offset = offset
@TagKey = tagkey
@Status = status
@OrderType = ordertype
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
@TagKey = params['TagKey']
@Status = params['Status']
@OrderType = params['OrderType']
end
end
# DescribeTagList返回参数结构体
class DescribeTagListResponse < TencentCloud::Common::AbstractModel
# @param RecordNum: 总记录数
# @type RecordNum: Integer
# @param Data: 标签信息
# @type Data: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RecordNum, :Data, :RequestId
def initialize(recordnum=nil, data=nil, requestid=nil)
@RecordNum = recordnum
@Data = data
@RequestId = requestid
end
def deserialize(params)
@RecordNum = params['RecordNum']
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
tagdatainfo_tmp = TagDataInfo.new
tagdatainfo_tmp.deserialize(i)
@Data << tagdatainfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVoucherInfo请求参数结构体
class DescribeVoucherInfoRequest < TencentCloud::Common::AbstractModel
# @param Limit: 一页多少条数据，默认是20条，最大不超过1000
# @type Limit: Integer
# @param Offset: 第多少页，默认是1
# @type Offset: Integer
# @param Status: 券状态：待使用：unUsed，已使用： used，已发货：delivered，已作废： cancel，已过期：overdue
# @type Status: String
# @param VoucherId: 代金券id
# @type VoucherId: String
# @param CodeId: 代金券订单id
# @type CodeId: String
# @param ProductCode: 商品码
# @type ProductCode: String
# @param ActivityId: 活动id
# @type ActivityId: String
# @param VoucherName: 代金券名称
# @type VoucherName: String
# @param TimeFrom: 发放开始时间,例：2021-01-01
# @type TimeFrom: String
# @param TimeTo: 发放结束时间，例：2021-01-01
# @type TimeTo: String
# @param SortField: 指定排序字段：BeginTime开始时间、EndTime到期时间、CreateTime创建时间
# @type SortField: String
# @param SortOrder: 指定升序降序：desc、asc
# @type SortOrder: String
# @param PayMode: 付费模式，postPay后付费/prePay预付费/riPay预留实例/""或者"*"表示全部模式，如果payMode为""或"*"，那么productCode与subProductCode必须传空
# @type PayMode: String
# @param PayScene: 付费场景PayMode=postPay时：spotpay-竞价实例,"settle account"-普通后付费PayMode=prePay时：purchase-包年包月新购，renew-包年包月续费（自动续费），modify-包年包月配置变更(变配）PayMode=riPay时：oneOffFee-预留实例预付，hourlyFee-预留实例每小时扣费，*-支持全部付费场景
# @type PayScene: String
# @param Operator: 操作人，默认就是用户uin
# @type Operator: String
# @param VoucherMainType: 代金券主类型 has_price 为有价现金券 no_price 为无价代金券
# @type VoucherMainType: String
# @param VoucherSubType: 代金券副类型 discount 为折扣券 deduct 为抵扣券
# @type VoucherSubType: String
attr_accessor :Limit, :Offset, :Status, :VoucherId, :CodeId, :ProductCode, :ActivityId, :VoucherName, :TimeFrom, :TimeTo, :SortField, :SortOrder, :PayMode, :PayScene, :Operator, :VoucherMainType, :VoucherSubType
def initialize(limit=nil, offset=nil, status=nil, voucherid=nil, codeid=nil, productcode=nil, activityid=nil, vouchername=nil, timefrom=nil, timeto=nil, sortfield=nil, sortorder=nil, paymode=nil, payscene=nil, operator=nil, vouchermaintype=nil, vouchersubtype=nil)
@Limit = limit
@Offset = offset
@Status = status
@VoucherId = voucherid
@CodeId = codeid
@ProductCode = productcode
@ActivityId = activityid
@VoucherName = vouchername
@TimeFrom = timefrom
@TimeTo = timeto
@SortField = sortfield
@SortOrder = sortorder
@PayMode = paymode
@PayScene = payscene
@Operator = operator
@VoucherMainType = vouchermaintype
@VoucherSubType = vouchersubtype
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
@Status = params['Status']
@VoucherId = params['VoucherId']
@CodeId = params['CodeId']
@ProductCode = params['ProductCode']
@ActivityId = params['ActivityId']
@VoucherName = params['VoucherName']
@TimeFrom = params['TimeFrom']
@TimeTo = params['TimeTo']
@SortField = params['SortField']
@SortOrder = params['SortOrder']
@PayMode = params['PayMode']
@PayScene = params['PayScene']
@Operator = params['Operator']
@VoucherMainType = params['VoucherMainType']
@VoucherSubType = params['VoucherSubType']
end
end
# DescribeVoucherInfo返回参数结构体
class DescribeVoucherInfoResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 券总数
# @type TotalCount: Integer
# @param TotalBalance: 总余额（微分）
# @type TotalBalance: Integer
# @param VoucherInfos: 代金券相关信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VoucherInfos: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :TotalBalance, :VoucherInfos, :RequestId
def initialize(totalcount=nil, totalbalance=nil, voucherinfos=nil, requestid=nil)
@TotalCount = totalcount
@TotalBalance = totalbalance
@VoucherInfos = voucherinfos
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@TotalBalance = params['TotalBalance']
unless params['VoucherInfos'].nil?
@VoucherInfos = []
params['VoucherInfos'].each do |i|
voucherinfos_tmp = VoucherInfos.new
voucherinfos_tmp.deserialize(i)
@VoucherInfos << voucherinfos_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeVoucherUsageDetails请求参数结构体
class DescribeVoucherUsageDetailsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 一页多少条数据，默认是20条，最大不超过1000
# @type Limit: Integer
# @param Offset: 第多少页，默认是1
# @type Offset: Integer
# @param VoucherId: 代金券id
# @type VoucherId: String
# @param Operator: 操作人，默认就是用户uin
# @type Operator: String
attr_accessor :Limit, :Offset, :VoucherId, :Operator
def initialize(limit=nil, offset=nil, voucherid=nil, operator=nil)
@Limit = limit
@Offset = offset
@VoucherId = voucherid
@Operator = operator
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
@VoucherId = params['VoucherId']
@Operator = params['Operator']
end
end
# DescribeVoucherUsageDetails返回参数结构体
class DescribeVoucherUsageDetailsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 券总数
# @type TotalCount: Integer
# @param TotalUsedAmount: 总已用金额（微分）
# @type TotalUsedAmount: Integer
# @param UsageRecords: 代金券使用记录细节
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UsageRecords: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :TotalUsedAmount, :UsageRecords, :RequestId
def initialize(totalcount=nil, totalusedamount=nil, usagerecords=nil, requestid=nil)
@TotalCount = totalcount
@TotalUsedAmount = totalusedamount
@UsageRecords = usagerecords
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@TotalUsedAmount = params['TotalUsedAmount']
unless params['UsageRecords'].nil?
@UsageRecords = []
params['UsageRecords'].each do |i|
usagerecords_tmp = UsageRecords.new
usagerecords_tmp.deserialize(i)
@UsageRecords << usagerecords_tmp
end
end
@RequestId = params['RequestId']
end
end
# 由时间和值组成的数据结构
class DetailPoint < TencentCloud::Common::AbstractModel
# @param Time: 时间
# @type Time: String
# @param Value: 值
# @type Value: String
attr_accessor :Time, :Value
def initialize(time=nil, value=nil)
@Time = time
@Value = value
end
def deserialize(params)
@Time = params['Time']
@Value = params['Value']
end
end
# 由域名和使用明细组成的数据结构
class DetailSet < TencentCloud::Common::AbstractModel
# @param Domain: 域名
# @type Domain: String
# @param DetailPoints: 使用数据明细
# @type DetailPoints: Array
# @param InstanceID: 实例ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceID: String
attr_accessor :Domain, :DetailPoints, :InstanceID
def initialize(domain=nil, detailpoints=nil, instanceid=nil)
@Domain = domain
@DetailPoints = detailpoints
@InstanceID = instanceid
end
def deserialize(params)
@Domain = params['Domain']
unless params['DetailPoints'].nil?
@DetailPoints = []
params['DetailPoints'].each do |i|
detailpoint_tmp = DetailPoint.new
detailpoint_tmp.deserialize(i)
@DetailPoints << detailpoint_tmp
end
end
@InstanceID = params['InstanceID']
end
end
# 经销账单明细数据对象
class DistributionBillDetail < TencentCloud::Common::AbstractModel
# @param BusinessCodeName: 产品名称：用户所采购的各类云产品，例如：云服务器 CVM
# @type BusinessCodeName: String
# @param ProductCodeName: 子产品名称：用户采购的具体产品细分类型，例如：云服务器 CVM-标准型 S1
# @type ProductCodeName: String
# @param PayModeName: 计费模式：资源的计费模式，区分为包年包月和按量计费
# @type PayModeName: String
# @param ProjectName: 项目名称：资源归属的项目，用户在控制台给资源自主分配项目，未分配则是默认项目
# @type ProjectName: String
# @param RegionName: 地域：资源所属地域，如华南地区（广州）
# @type RegionName: String
# @param ZoneName: 可用区：资源所属可用区，如广州三区
# @type ZoneName: String
# @param ResourceId: 资源 ID：账单中出账对象 ID，不同产品因资源形态不同，资源内容不完全相同，如云服务器 CVM 为对应的实例 ID
# @type ResourceId: String
# @param ResourceName: 资源别名：用户在控制台为资源设置的名称，如果未设置，则默认为空
# @type ResourceName: String
# @param ActionTypeName: 交易类型，如包年包月新购、包年包月续费、按量计费扣费等类型
# @type ActionTypeName: String
# @param OrderId: 订单ID：包年包月计费模式下订购的订单号
# @type OrderId: String
# @param BillId: 交易ID：结算扣费单号
# @type BillId: String
# @param PayTime: 扣费时间：结算扣费时间
# @type PayTime: String
# @param FeeBeginTime: 开始使用时间：产品服务开始使用时间
# @type FeeBeginTime: String
# @param FeeEndTime: 结束使用时间：产品服务结束使用时间
# @type FeeEndTime: String
# @param ComponentSet: 组件列表
# @type ComponentSet: Array
# @param OwnerUin: 使用者UIN：实际使用资源的账号 ID
# @type OwnerUin: String
# @param OperateUin: 操作者UIN：操作者账号 ID（预付费资源下单或后付费操作开通资源账号的 ID 或者角色 ID ）
# @type OperateUin: String
# @param Tags: 标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param BusinessCode: 产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessCode: String
# @param ProductCode: 子产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductCode: String
# @param ActionType: 交易类型编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ActionType: String
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param PriceInfo: 价格属性：该组件除单价、时长外的其他影响折扣定价的属性信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PriceInfo: Array
# @param AssociatedOrder: 关联交易单据ID：和本笔交易关联单据 ID，如，冲销订单，记录原订单、重结订单，退费单记录对应的原购买订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssociatedOrder: :class:`Tencentcloud::Billing.v20180709.models.BillDetailAssociatedOrder`
# @param Formula: 计算说明：特殊交易类型计费结算的详细计算说明，如退费及变配
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Formula: String
# @param FormulaUrl: 计费规则：各产品详细的计费规则官网说明链接
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FormulaUrl: String
attr_accessor :BusinessCodeName, :ProductCodeName, :PayModeName, :ProjectName, :RegionName, :ZoneName, :ResourceId, :ResourceName, :ActionTypeName, :OrderId, :BillId, :PayTime, :FeeBeginTime, :FeeEndTime, :ComponentSet, :OwnerUin, :OperateUin, :Tags, :BusinessCode, :ProductCode, :ActionType, :RegionId, :ProjectId, :PriceInfo, :AssociatedOrder, :Formula, :FormulaUrl
def initialize(businesscodename=nil, productcodename=nil, paymodename=nil, projectname=nil, regionname=nil, zonename=nil, resourceid=nil, resourcename=nil, actiontypename=nil, orderid=nil, billid=nil, paytime=nil, feebegintime=nil, feeendtime=nil, componentset=nil, owneruin=nil, operateuin=nil, tags=nil, businesscode=nil, productcode=nil, actiontype=nil, regionid=nil, projectid=nil, priceinfo=nil, associatedorder=nil, formula=nil, formulaurl=nil)
@BusinessCodeName = businesscodename
@ProductCodeName = productcodename
@PayModeName = paymodename
@ProjectName = projectname
@RegionName = regionname
@ZoneName = zonename
@ResourceId = resourceid
@ResourceName = resourcename
@ActionTypeName = actiontypename
@OrderId = orderid
@BillId = billid
@PayTime = paytime
@FeeBeginTime = feebegintime
@FeeEndTime = feeendtime
@ComponentSet = componentset
@OwnerUin = owneruin
@OperateUin = operateuin
@Tags = tags
@BusinessCode = businesscode
@ProductCode = productcode
@ActionType = actiontype
@RegionId = regionid
@ProjectId = projectid
@PriceInfo = priceinfo
@AssociatedOrder = associatedorder
@Formula = formula
@FormulaUrl = formulaurl
end
def deserialize(params)
@BusinessCodeName = params['BusinessCodeName']
@ProductCodeName = params['ProductCodeName']
@PayModeName = params['PayModeName']
@ProjectName = params['ProjectName']
@RegionName = params['RegionName']
@ZoneName = params['ZoneName']
@ResourceId = params['ResourceId']
@ResourceName = params['ResourceName']
@ActionTypeName = params['ActionTypeName']
@OrderId = params['OrderId']
@BillId = params['BillId']
@PayTime = params['PayTime']
@FeeBeginTime = params['FeeBeginTime']
@FeeEndTime = params['FeeEndTime']
unless params['ComponentSet'].nil?
@ComponentSet = []
params['ComponentSet'].each do |i|
billdetailcomponent_tmp = BillDetailComponent.new
billdetailcomponent_tmp.deserialize(i)
@ComponentSet << billdetailcomponent_tmp
end
end
@OwnerUin = params['OwnerUin']
@OperateUin = params['OperateUin']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
billtaginfo_tmp = BillTagInfo.new
billtaginfo_tmp.deserialize(i)
@Tags << billtaginfo_tmp
end
end
@BusinessCode = params['BusinessCode']
@ProductCode = params['ProductCode']
@ActionType = params['ActionType']
@RegionId = params['RegionId']
@ProjectId = params['ProjectId']
@PriceInfo = params['PriceInfo']
unless params['AssociatedOrder'].nil?
@AssociatedOrder = BillDetailAssociatedOrder.new
@AssociatedOrder.deserialize(params['AssociatedOrder'])
end
@Formula = params['Formula']
@FormulaUrl = params['FormulaUrl']
end
end
# 不适用商品信息
class ExcludedProducts < TencentCloud::Common::AbstractModel
# @param GoodsName: 不适用商品名称
# @type GoodsName: String
# @param PayMode: postPay后付费/prePay预付费/riPay预留实例/空字符串或者"*"表示全部模式。
# @type PayMode: String
attr_accessor :GoodsName, :PayMode
def initialize(goodsname=nil, paymode=nil)
@GoodsName = goodsname
@PayMode = paymode
end
def deserialize(params)
@GoodsName = params['GoodsName']
@PayMode = params['PayMode']
end
end
# PayDeals请求参数结构体
class PayDealsRequest < TencentCloud::Common::AbstractModel
# @param OrderIds: 需要支付的一个或者多个子订单号，与BigDealIds字段两者必须且仅传一个参数
# @type OrderIds: Array
# @param AutoVoucher: 是否自动使用代金券,1:是,0否,默认0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表,目前仅支持指定一张代金券
# @type VoucherIds: Array
# @param BigDealIds: 需要支付的一个或者多个大订单号，与OrderIds字段两者必须且仅传一个参数
# @type BigDealIds: Array
attr_accessor :OrderIds, :AutoVoucher, :VoucherIds, :BigDealIds
def initialize(orderids=nil, autovoucher=nil, voucherids=nil, bigdealids=nil)
@OrderIds = orderids
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@BigDealIds = bigdealids
end
def deserialize(params)
@OrderIds = params['OrderIds']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@BigDealIds = params['BigDealIds']
end
end
# PayDeals返回参数结构体
class PayDealsResponse < TencentCloud::Common::AbstractModel
# @param OrderIds: 此次操作支付成功的子订单号数组
# @type OrderIds: Array
# @param ResourceIds: 此次操作支付成功的资源Id数组
# @type ResourceIds: Array
# @param BigDealIds: 此次操作支付成功的大订单号数组
# @type BigDealIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :OrderIds, :ResourceIds, :BigDealIds, :RequestId
def initialize(orderids=nil, resourceids=nil, bigdealids=nil, requestid=nil)
@OrderIds = orderids
@ResourceIds = resourceids
@BigDealIds = bigdealids
@RequestId = requestid
end
def deserialize(params)
@OrderIds = params['OrderIds']
@ResourceIds = params['ResourceIds']
@BigDealIds = params['BigDealIds']
@RequestId = params['RequestId']
end
end
# 按计费模式汇总消费详情
class PayModeSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param PayMode: 计费模式编码
# @type PayMode: String
# @param PayModeName: 计费模式：区分为包年包月和按量计费
# @type PayModeName: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# @type TransferPayAmount: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
# @param Detail: 按交易类型汇总消费详情
# @type Detail: Array
attr_accessor :PayMode, :PayModeName, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :TotalCost, :Detail
def initialize(paymode=nil, paymodename=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, totalcost=nil, detail=nil)
@PayMode = paymode
@PayModeName = paymodename
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@TotalCost = totalcost
@Detail = detail
end
def deserialize(params)
@PayMode = params['PayMode']
@PayModeName = params['PayModeName']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@TotalCost = params['TotalCost']
unless params['Detail'].nil?
@Detail = []
params['Detail'].each do |i|
actionsummaryoverviewitem_tmp = ActionSummaryOverviewItem.new
actionsummaryoverviewitem_tmp.deserialize(i)
@Detail << actionsummaryoverviewitem_tmp
end
end
end
end
# 商品详细信息
class ProductInfo < TencentCloud::Common::AbstractModel
# @param Name: 商品详情名称标识
# @type Name: String
# @param Value: 商品详情
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 按项目汇总消费详情
class ProjectSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: String
# @param ProjectName: 项目名称：资源归属的项目，用户在控制台给资源自主分配项目，未分配则是默认项目
# @type ProjectName: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# @type TransferPayAmount: String
# @param BillMonth: 账单月份，格式2019-08
# @type BillMonth: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
attr_accessor :ProjectId, :ProjectName, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :BillMonth, :TotalCost
def initialize(projectid=nil, projectname=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, billmonth=nil, totalcost=nil)
@ProjectId = projectid
@ProjectName = projectname
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@BillMonth = billmonth
@TotalCost = totalcost
end
def deserialize(params)
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@BillMonth = params['BillMonth']
@TotalCost = params['TotalCost']
end
end
# 按地域汇总消费详情
class RegionSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: String
# @param RegionName: 地域名称：资源所属地域，例如华南地区（广州）
# @type RegionName: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# @type TransferPayAmount: String
# @param BillMonth: 账单月份，格式2019-08
# @type BillMonth: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
attr_accessor :RegionId, :RegionName, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :BillMonth, :TotalCost
def initialize(regionid=nil, regionname=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, billmonth=nil, totalcost=nil)
@RegionId = regionid
@RegionName = regionname
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@BillMonth = billmonth
@TotalCost = totalcost
end
def deserialize(params)
@RegionId = params['RegionId']
@RegionName = params['RegionName']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@BillMonth = params['BillMonth']
@TotalCost = params['TotalCost']
end
end
# 节省计划覆盖率数据
class SavingPlanCoverageDetail < TencentCloud::Common::AbstractModel
# @param ResourceId: 资源 ID：账单中出账对象 ID，不同产品因资源形态不同，资源内容不完全相同，如云服务器 CVM 为对应的实例 ID
# @type ResourceId: String
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: Integer
# @param ProductCode: 产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductCode: String
# @param SubProductCode: 子产品编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubProductCode: String
# @param StartDate: 费用起始日期，格式yyyy-MM-dd
# @type StartDate: String
# @param EndDate: 费用结束日期，格式yyyy-MM-dd，目前与StartDate相等
# @type EndDate: String
# @param SpCoveredAmount: 节省计划覆盖金额（即节省计划支付金额）
# @type SpCoveredAmount: Float
# @param SpUncoveredAmount: 节省计划未覆盖金额（即优惠后总价）
# @type SpUncoveredAmount: Float
# @param TotalRealAmount: 总支出（即节省计划未覆盖金额 + 节省计划覆盖金额）
# @type TotalRealAmount: Float
# @param ExpectedAmount: 按量计费预期金额（即折前价 * 折扣）
# @type ExpectedAmount: Float
# @param SpCoverage: 覆盖率结果，取值[0, 100]
# @type SpCoverage: Float
attr_accessor :ResourceId, :RegionId, :ProductCode, :SubProductCode, :StartDate, :EndDate, :SpCoveredAmount, :SpUncoveredAmount, :TotalRealAmount, :ExpectedAmount, :SpCoverage
def initialize(resourceid=nil, regionid=nil, productcode=nil, subproductcode=nil, startdate=nil, enddate=nil, spcoveredamount=nil, spuncoveredamount=nil, totalrealamount=nil, expectedamount=nil, spcoverage=nil)
@ResourceId = resourceid
@RegionId = regionid
@ProductCode = productcode
@SubProductCode = subproductcode
@StartDate = startdate
@EndDate = enddate
@SpCoveredAmount = spcoveredamount
@SpUncoveredAmount = spuncoveredamount
@TotalRealAmount = totalrealamount
@ExpectedAmount = expectedamount
@SpCoverage = spcoverage
end
def deserialize(params)
@ResourceId = params['ResourceId']
@RegionId = params['RegionId']
@ProductCode = params['ProductCode']
@SubProductCode = params['SubProductCode']
@StartDate = params['StartDate']
@EndDate = params['EndDate']
@SpCoveredAmount = params['SpCoveredAmount']
@SpUncoveredAmount = params['SpUncoveredAmount']
@TotalRealAmount = params['TotalRealAmount']
@ExpectedAmount = params['ExpectedAmount']
@SpCoverage = params['SpCoverage']
end
end
# 节省计划覆盖率聚合数据
class SavingPlanCoverageRate < TencentCloud::Common::AbstractModel
# @param DatePoint: 聚合时间维度，按天聚合格式为yyyy-MM-dd，按月聚合格式为yyyy-MM
# @type DatePoint: String
# @param Rate: 覆盖率结果，取值[0, 100]
# @type Rate: Float
attr_accessor :DatePoint, :Rate
def initialize(datepoint=nil, rate=nil)
@DatePoint = datepoint
@Rate = rate
end
def deserialize(params)
@DatePoint = params['DatePoint']
@Rate = params['Rate']
end
end
# 节省计划总览明细数据
class SavingPlanOverviewDetail < TencentCloud::Common::AbstractModel
# @param SpType: 节省计划类型
# @type SpType: String
# @param PayType: 支付类型
# @type PayType: Integer
# @param PayAmount: 支付金额（单位：元）
# @type PayAmount: String
# @param StartTime: 开始时间 yyyy-mm-dd HH:mm:ss格式
# @type StartTime: String
# @param EndTime: 结束时间 yyyy-mm-dd HH:mm:ss格式
# @type EndTime: String
# @param BuyTime: 购买时间 yyyy-mm-dd HH:mm:ss格式
# @type BuyTime: String
# @param Status: 状态
# @type Status: Integer
# @param SavingAmount: 累计节省金额（单位：元）
# @type SavingAmount: String
# @param Region: 地域
# @type Region: Array
attr_accessor :SpType, :PayType, :PayAmount, :StartTime, :EndTime, :BuyTime, :Status, :SavingAmount, :Region
def initialize(sptype=nil, paytype=nil, payamount=nil, starttime=nil, endtime=nil, buytime=nil, status=nil, savingamount=nil, region=nil)
@SpType = sptype
@PayType = paytype
@PayAmount = payamount
@StartTime = starttime
@EndTime = endtime
@BuyTime = buytime
@Status = status
@SavingAmount = savingamount
@Region = region
end
def deserialize(params)
@SpType = params['SpType']
@PayType = params['PayType']
@PayAmount = params['PayAmount']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@BuyTime = params['BuyTime']
@Status = params['Status']
@SavingAmount = params['SavingAmount']
@Region = params['Region']
end
end
# 节省计划使用率数据
class SavingPlanUsageDetail < TencentCloud::Common::AbstractModel
# @param SpType: 节省计划类型
# @type SpType: String
# @param Status: 节省计划状态
# @type Status: Integer
# @param DeductAmount: 累计抵扣的金额（单位：元）
# @type DeductAmount: String
# @param PromiseAmount: 累计承诺消费金额（单位：元）
# @type PromiseAmount: String
# @param NetSavings: 累计净节省金额（单位：元）
# @type NetSavings: String
# @param UtilizationRate: 使用率
# @type UtilizationRate: Float
# @param LossAmount: 累计流失金额（单位：元）
# @type LossAmount: String
# @param DosageAmount: 累计按量计费预期金额（单位：元）
# @type DosageAmount: String
# @param CostAmount: 累计成本金额（单位：元）
# @type CostAmount: String
# @param Region: 地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: Array
attr_accessor :SpType, :Status, :DeductAmount, :PromiseAmount, :NetSavings, :UtilizationRate, :LossAmount, :DosageAmount, :CostAmount, :Region
def initialize(sptype=nil, status=nil, deductamount=nil, promiseamount=nil, netsavings=nil, utilizationrate=nil, lossamount=nil, dosageamount=nil, costamount=nil, region=nil)
@SpType = sptype
@Status = status
@DeductAmount = deductamount
@PromiseAmount = promiseamount
@NetSavings = netsavings
@UtilizationRate = utilizationrate
@LossAmount = lossamount
@DosageAmount = dosageamount
@CostAmount = costamount
@Region = region
end
def deserialize(params)
@SpType = params['SpType']
@Status = params['Status']
@DeductAmount = params['DeductAmount']
@PromiseAmount = params['PromiseAmount']
@NetSavings = params['NetSavings']
@UtilizationRate = params['UtilizationRate']
@LossAmount = params['LossAmount']
@DosageAmount = params['DosageAmount']
@CostAmount = params['CostAmount']
@Region = params['Region']
end
end
# 账单多维度汇总消费详情
class SummaryDetail < TencentCloud::Common::AbstractModel
# @param GroupKey: 账单维度编码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupKey: String
# @param GroupValue: 账单维度值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupValue: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# @type TotalCost: String
# @param RealTotalCost: 优惠后总价
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param Business: 产品汇总信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Business: Array
attr_accessor :GroupKey, :GroupValue, :TotalCost, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :Business
def initialize(groupkey=nil, groupvalue=nil, totalcost=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, business=nil)
@GroupKey = groupkey
@GroupValue = groupvalue
@TotalCost = totalcost
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@Business = business
end
def deserialize(params)
@GroupKey = params['GroupKey']
@GroupValue = params['GroupValue']
@TotalCost = params['TotalCost']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
unless params['Business'].nil?
@Business = []
params['Business'].each do |i|
businesssummaryinfo_tmp = BusinessSummaryInfo.new
businesssummaryinfo_tmp.deserialize(i)
@Business << businesssummaryinfo_tmp
end
end
end
end
# 总数
class SummaryTotal < TencentCloud::Common::AbstractModel
# @param RealTotalCost: 优惠后总价
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealTotalCost: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCost: String
attr_accessor :RealTotalCost, :TotalCost
def initialize(realtotalcost=nil, totalcost=nil)
@RealTotalCost = realtotalcost
@TotalCost = totalcost
end
def deserialize(params)
@RealTotalCost = params['RealTotalCost']
@TotalCost = params['TotalCost']
end
end
# 标签信息
class TagDataInfo < TencentCloud::Common::AbstractModel
# @param TagKey: 分账标签键
# @type TagKey: String
# @param Status: 标签类型，0普通标签，1分账标签
# @type Status: Integer
# @param UpdateTime: 设置分账标签时间，普通标签不返回
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
attr_accessor :TagKey, :Status, :UpdateTime
def initialize(tagkey=nil, status=nil, updatetime=nil)
@TagKey = tagkey
@Status = status
@UpdateTime = updatetime
end
def deserialize(params)
@TagKey = params['TagKey']
@Status = params['Status']
@UpdateTime = params['UpdateTime']
end
end
# 按标签汇总消费详情
class TagSummaryOverviewItem < TencentCloud::Common::AbstractModel
# @param TagValue: 标签值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagValue: String
# @param RealTotalCostRatio: 费用所占百分比，两位小数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealTotalCostRatio: String
# @param RealTotalCost: 优惠后总价
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RealTotalCost: String
# @param CashPayAmount: 现金账户支出：通过现金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CashPayAmount: String
# @param IncentivePayAmount: 赠送账户支出：使用赠送金支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IncentivePayAmount: String
# @param VoucherPayAmount: 优惠券支出：使用各类优惠券（如代金券、现金券等）支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VoucherPayAmount: String
# @param TransferPayAmount: 分成金账户支出：通过分成金账户支付的金额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TransferPayAmount: String
# @param TotalCost: 原价，单位为元。TotalCost字段自账单3.0（即2021-05）之后开始生效，账单3.0之前返回"-"。合同价的情况下，TotalCost字段与官网价格存在差异，也返回“-”。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCost: String
attr_accessor :TagValue, :RealTotalCostRatio, :RealTotalCost, :CashPayAmount, :IncentivePayAmount, :VoucherPayAmount, :TransferPayAmount, :TotalCost
def initialize(tagvalue=nil, realtotalcostratio=nil, realtotalcost=nil, cashpayamount=nil, incentivepayamount=nil, voucherpayamount=nil, transferpayamount=nil, totalcost=nil)
@TagValue = tagvalue
@RealTotalCostRatio = realtotalcostratio
@RealTotalCost = realtotalcost
@CashPayAmount = cashpayamount
@IncentivePayAmount = incentivepayamount
@VoucherPayAmount = voucherpayamount
@TransferPayAmount = transferpayamount
@TotalCost = totalcost
end
def deserialize(params)
@TagValue = params['TagValue']
@RealTotalCostRatio = params['RealTotalCostRatio']
@RealTotalCost = params['RealTotalCost']
@CashPayAmount = params['CashPayAmount']
@IncentivePayAmount = params['IncentivePayAmount']
@VoucherPayAmount = params['VoucherPayAmount']
@TransferPayAmount = params['TransferPayAmount']
@TotalCost = params['TotalCost']
end
end
# 购买商品信息
class UsageDetails < TencentCloud::Common::AbstractModel
# @param ProductName: 商品名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductName: String
# @param SubProductName: 商品细节
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubProductName: String
attr_accessor :ProductName, :SubProductName
def initialize(productname=nil, subproductname=nil)
@ProductName = productname
@SubProductName = subproductname
end
def deserialize(params)
@ProductName = params['ProductName']
@SubProductName = params['SubProductName']
end
end
# 使用记录
class UsageRecords < TencentCloud::Common::AbstractModel
# @param UsedAmount: 使用金额（微分）
# @type UsedAmount: Integer
# @param UsedTime: 使用时间
# @type UsedTime: String
# @param UsageDetails: 使用记录细节
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UsageDetails: Array
attr_accessor :UsedAmount, :UsedTime, :UsageDetails
def initialize(usedamount=nil, usedtime=nil, usagedetails=nil)
@UsedAmount = usedamount
@UsedTime = usedtime
@UsageDetails = usagedetails
end
def deserialize(params)
@UsedAmount = params['UsedAmount']
@UsedTime = params['UsedTime']
unless params['UsageDetails'].nil?
@UsageDetails = []
params['UsageDetails'].each do |i|
usagedetails_tmp = UsageDetails.new
usagedetails_tmp.deserialize(i)
@UsageDetails << usagedetails_tmp
end
end
end
end
# 代金券相关信息
class VoucherInfos < TencentCloud::Common::AbstractModel
# @param OwnerUin: 代金券拥有者
# @type OwnerUin: String
# @param Status: 券状态：待使用：unUsed，已使用： used，已发货：delivered，已作废： cancel，已过期：overdue
# @type Status: String
# @param NominalValue: 代金券面额（微分）
# @type NominalValue: Integer
# @param Balance: 剩余金额（微分）
# @type Balance: Integer
# @param VoucherId: 代金券id
# @type VoucherId: String
# @param PayMode: postPay后付费/prePay预付费/riPay预留实例/空字符串或者'*'表示全部模式
# @type PayMode: String
# @param PayScene: 付费场景PayMode=postPay时：spotpay-竞价实例,"settle account"-普通后付费PayMode=prePay时：purchase-包年包月新购，renew-包年包月续费（自动续费），modify-包年包月配置变更(变配）PayMode=riPay时：oneOffFee-预留实例预付，hourlyFee-预留实例每小时扣费，*-支持全部付费场景
# @type PayScene: String
# @param BeginTime: 有效期生效时间
# @type BeginTime: String
# @param EndTime: 有效期截止时间
# @type EndTime: String
# @param ApplicableProducts: 适用商品信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ApplicableProducts: :class:`Tencentcloud::Billing.v20180709.models.ApplicableProducts`
# @param ExcludedProducts: 不适用商品信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExcludedProducts: Array
attr_accessor :OwnerUin, :Status, :NominalValue, :Balance, :VoucherId, :PayMode, :PayScene, :BeginTime, :EndTime, :ApplicableProducts, :ExcludedProducts
def initialize(owneruin=nil, status=nil, nominalvalue=nil, balance=nil, voucherid=nil, paymode=nil, payscene=nil, begintime=nil, endtime=nil, applicableproducts=nil, excludedproducts=nil)
@OwnerUin = owneruin
@Status = status
@NominalValue = nominalvalue
@Balance = balance
@VoucherId = voucherid
@PayMode = paymode
@PayScene = payscene
@BeginTime = begintime
@EndTime = endtime
@ApplicableProducts = applicableproducts
@ExcludedProducts = excludedproducts
end
def deserialize(params)
@OwnerUin = params['OwnerUin']
@Status = params['Status']
@NominalValue = params['NominalValue']
@Balance = params['Balance']
@VoucherId = params['VoucherId']
@PayMode = params['PayMode']
@PayScene = params['PayScene']
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
unless params['ApplicableProducts'].nil?
@ApplicableProducts = ApplicableProducts.new
@ApplicableProducts.deserialize(params['ApplicableProducts'])
end
unless params['ExcludedProducts'].nil?
@ExcludedProducts = []
params['ExcludedProducts'].each do |i|
excludedproducts_tmp = ExcludedProducts.new
excludedproducts_tmp.deserialize(i)
@ExcludedProducts << excludedproducts_tmp
end
end
end
end
end
end
end