# frozen_string_literal: true # Copyright 2019 Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require "shellwords" require "appengine/util/gcloud" require "appengine/exec" module AppEngine ## # # App Engine Rake Tasks. # # To make these tasks available, add the line `require "appengine/tasks"` # to your Rakefile. If your app uses Ruby on Rails, then the appengine gem # provides a railtie that adds its tasks automatically, so you don't have # to do anything beyond adding the gem to your Gemfile. # # The following tasks are defined: # # ## Rake appengine:exec # # Executes a given command in the context of an App Engine application, using # App Engine remote execution. See {AppEngine::Exec} for more information on # this capability. # # The command to be run may either be provided as a rake argument, or as # command line arguments, delimited by two dashes `--`. (The dashes are # needed to separate your command from rake arguments and flags.) # For example, to run a production database migration, you can run either of # the following equivalent commands: # # bundle exec rake "appengine:exec[bundle exec bin/rails db:migrate]" # bundle exec rake appengine:exec -- bundle exec bin/rails db:migrate # # To display usage instructions, provide two dashes but no command: # # bundle exec rake appengine:exec -- # # ### Parameters # # You may customize the behavior of App Engine execution through a few # enviroment variable parameters. These are set via the normal mechanism at # the end of a rake command line. For example, to set GAE_CONFIG: # # bundle exec rake appengine:exec GAE_CONFIG=myservice.yaml -- bundle exec bin/rails db:migrate # # Be sure to set these parameters before the double dash. Any arguments # following the double dash are interpreted as part of the command itself. # # The following environment variable parameters are supported: # # #### GAE_TIMEOUT # # Amount of time to wait before appengine:exec terminates the command. # Expressed as a string formatted like: "2h15m10s". Default is "10m". # # #### GAE_PROJECT # # The ID of your Google Cloud project. If not specified, uses the current # project from gcloud. # # #### GAE_CONFIG # # Path to the App Engine config file, used when your app has multiple # services, or the config file is otherwise not called `./app.yaml`. The # config file is used to determine the name of the App Engine service. # # #### GAE_SERVICE # # Name of the service to be used. Overrides any service name specified in # your config file. # # #### GAE_EXEC_STRATEGY # # The execution strategy to use. Valid values are "deployment" (which is the # default for App Engine Standard apps) and "cloud_build" (which is the # default for App Engine Flexible apps). # # Normally you should leave the strategy set to the default. The main reason # to change it is if your app runs on the Flexible Environment and talks to # a database over a VPC (using a private IP address). The "cloud_build" # strategy used by default for Flexible apps cannot connect to a VPC, so you # should use "deployment" in this case. (But note that, otherwise, the # "deployment" strategy is significantly slower for apps on the Flexible # environment.) # # #### GAE_VERSION # # The version of the service, used to identify which application image to # use to run your command. If not specified, uses the most recently created # version, regardless of whether that version is actually serving traffic. # Applies only to the "cloud_build" strategy. (The "deployment" strategy # deploys its own temporary version of your app.) # # #### GAE_EXEC_WRAPPER_IMAGE # # The fully-qualified name of the wrapper image to use. (This is a Docker # image that emulates the App Engine environment in Google Cloud Build for # the "cloud_build" strategy, and applies only to that strategy.) Normally, # you should not override this unless you are testing a new wrapper. # # #### CLOUD_BUILD_GCS_LOG_DIR # # GCS bucket name of the cloud build log when GAE_STRATEGY is "cloud_build". # (ex. "gs://BUCKET-NAME/FOLDER-NAME") module Tasks ## @private PROJECT_ENV = "GAE_PROJECT" ## @private STRATEGY_ENV = "GAE_EXEC_STRATEGY" ## @private CONFIG_ENV = "GAE_CONFIG" ## @private SERVICE_ENV = "GAE_SERVICE" ## @private VERSION_ENV = "GAE_VERSION" ## @private TIMEOUT_ENV = "GAE_TIMEOUT" ## @private WRAPPER_IMAGE_ENV = "GAE_EXEC_WRAPPER_IMAGE" ## @private GCS_LOG_DIR = "CLOUD_BUILD_GCS_LOG_DIR" @defined = false class << self ## # @private # Define rake tasks. # def define if @defined puts "AppEngine rake tasks already defined." return end @defined = true setup_exec_task end private def setup_exec_task ::Rake.application.last_description = "Execute the given command in Google App Engine." ::Rake::Task.define_task "appengine:exec", [:cmd] do |_t, args| verify_gcloud_and_report_errors command = extract_command args[:cmd], ::ARGV app_exec = Exec.new command, project: ::ENV[PROJECT_ENV], service: ::ENV[SERVICE_ENV], config_path: ::ENV[CONFIG_ENV], version: ::ENV[VERSION_ENV], timeout: ::ENV[TIMEOUT_ENV], wrapper_image: ::ENV[WRAPPER_IMAGE_ENV], strategy: ::ENV[STRATEGY_ENV], gcs_log_dir: ::ENV[GCS_LOG_DIR] start_and_report_errors app_exec exit end end def extract_command cmd, argv if cmd ::Shellwords.split cmd else i = (argv.index { |a| a.to_s == "--" } || -1) + 1 if i.zero? report_error <<~MESSAGE No command provided for appengine:exec. Did you remember to delimit it with two dashes? e.g. bundle exec rake appengine:exec -- bundle exec ruby myscript.rb For detailed usage instructions, provide two dashes but no command: bundle exec rake appengine:exec -- MESSAGE end command = ::ARGV[i..-1] if command.empty? show_usage exit end command end end def show_usage puts <<~USAGE rake appengine:exec This Rake task executes a given command in the context of an App Engine application, using App Engine remote execution. For more information, on this capability, see the AppEngine::Exec documentation at http://www.rubydoc.info/gems/appengine/AppEngine/Exec The command to be run may either be provided as a rake argument, or as command line arguments delimited by two dashes `--`. (The dashes are needed to separate your command from rake arguments and flags.) For example, to run a production database migration, you can run either of the following equivalent commands: bundle exec rake "appengine:exec[bundle exec bin/rails db:migrate]" bundle exec rake appengine:exec -- bundle exec bin/rails db:migrate To display these usage instructions, provide two dashes but no command: bundle exec rake appengine:exec -- You may customize the behavior of App Engine execution through a few enviroment variable parameters. These are set via the normal mechanism at the end of a rake command line but before the double dash. For example, to set GAE_CONFIG: bundle exec rake appengine:exec GAE_CONFIG=myservice.yaml -- bundle exec bin/rails db:migrate Be sure to set these parameters before the double dash. Any arguments following the double dash are interpreted as part of the command itself. The following environment variable parameters are supported: GAE_TIMEOUT Amount of time to wait before appengine:exec terminates the command. Expressed as a string formatted like: "2h15m10s". Default is "10m". GAE_PROJECT The ID of your Google Cloud project. If not specified, uses the current project from gcloud. GAE_CONFIG Path to the App Engine config file, used when your app has multiple services, or the config file is otherwise not called `./app.yaml`. The config file is used to determine the name of the App Engine service. GAE_SERVICE Name of the service to be used. Overrides any service name specified in your config file. GAE_EXEC_STRATEGY The execution strategy to use. Valid values are "deployment" (which is the default for App Engine Standard apps) and "cloud_build" (which is the default for App Engine Flexible apps). Normally you should leave the strategy set to the default. The main reason to change it is if your app runs on the Flexible Environment and talks to a database over a VPC (using a private IP address). The "cloud_build" strategy used by default for Flexible apps cannot connect to a VPC, so you should use "deployment" in this case. (But note that, otherwise, the "deployment" strategy is significantly slower for apps on the Flexible environment.) GAE_VERSION The version of the service, used to identify which application image to use to run your command. If not specified, uses the most recently created version, regardless of whether that version is actually serving traffic. Applies only to the "cloud_build" strategy. (The "deployment" strategy deploys its own temporary version of your app.) GAE_EXEC_WRAPPER_IMAGE The fully-qualified name of the wrapper image to use. (This is a Docker image that emulates the App Engine environment in Google Cloud Build for the "cloud_build" strategy, and applies only to that strategy.) Normally, you should not override this unless you are testing a new wrapper. CLOUD_BUILD_GCS_LOG_DIR GCS bucket name of the cloud build log when GAE_STRATEGY is "cloud_build". (ex. "gs://BUCKET-NAME/FOLDER-NAME") This rake task is provided by the "appengine" gem. To make these tasks available, add the following line to your Rakefile: require "appengine/tasks" If your app uses Ruby on Rails, the gem provides a railtie that adds its tasks automatically, so you don't have to do anything beyond adding the gem to your Gemfile. For more information or to report issues, visit the Github page: https://github.com/GoogleCloudPlatform/appengine-ruby USAGE end def verify_gcloud_and_report_errors Util::Gcloud.verify! rescue Util::Gcloud::BinaryNotFound report_error <<~MESSAGE Could not find the `gcloud` binary in your system path. This tool requires the Google Cloud SDK. To download and install it, visit https://cloud.google.com/sdk/downloads MESSAGE rescue Util::Gcloud::GcloudNotAuthenticated report_error <<~MESSAGE The gcloud authorization has not been completed. If you have not yet initialized the Google Cloud SDK, we recommend running the `gcloud init` command as described at https://cloud.google.com/sdk/docs/initializing Alternately, you may log in directly by running `gcloud auth login`. MESSAGE rescue Util::Gcloud::ProjectNotSet report_error <<~MESSAGE The gcloud project configuration has not been set. If you have not yet initialized the Google Cloud SDK, we recommend running the `gcloud init` command as described at https://cloud.google.com/sdk/docs/initializing Alternately, you may set the default project configuration directly by running `gcloud config set project `. MESSAGE end def start_and_report_errors app_exec app_exec.start rescue Exec::ConfigFileNotFound => e report_error <<~MESSAGE Could not determine which service should run this command because the App Engine config file "#{e.config_path}" was not found. Specify the config file using the GAE_CONFIG argument. e.g. bundle exec rake appengine:exec GAE_CONFIG=myapp.yaml -- myscript.sh Alternately, you may specify a service name directly with GAE_SERVICE. e.g. bundle exec rake appengine:exec GAE_SERVICE=myservice -- myscript.sh MESSAGE rescue Exec::BadConfigFileFormat => e report_error <<~MESSAGE Could not determine which service should run this command because the App Engine config file "#{e.config_path}" was malformed. It must be a valid YAML file. Specify the config file using the GAE_CONFIG argument. e.g. bundle exec rake appengine:exec GAE_CONFIG=myapp.yaml -- myscript.sh Alternately, you may specify a service name directly with GAE_SERVICE. e.g. bundle exec rake appengine:exec GAE_SERVICE=myservice -- myscript.sh MESSAGE rescue Exec::NoSuchVersion => e if e.version report_error <<~MESSAGE Could not find version "#{e.version}" of service "#{e.service}". Please double-check the version exists. To use the most recent version by default, omit the GAE_VERSION argument. MESSAGE else report_error <<~MESSAGE Could not find any versions of service "#{e.service}". Please double-check that you have deployed this service. If you want to run a command against a different service, you may provide a GAE_CONFIG argument pointing to your App Engine config file, or a GAE_SERVICE argument to specify a service directly. MESSAGE end rescue Exec::NoDefaultProject report_error <<~MESSAGE Could not get the default project from gcloud. Please either set the current project using gcloud config set project my-project-id or specify the project by setting the GAE_PROJECT argument. e.g. bundle exec rake appengine:exec GAE_PROJECT=my-project-id -- myscript.sh MESSAGE rescue Exec::UsageError => e report_error e.message end def report_error str ::STDERR.puts str exit 1 end end end end ::AppEngine::Tasks.define