# *******************************************************************************
# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
# All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# (1) Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# (2) Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# (3) Neither the name of the copyright holder nor the names of any contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission from the respective party.
#
# (4) Other than as required in clauses (1) and (2), distributions in any form
# of modifications or other derivative works may not use the "OpenStudio"
# trademark, "OS", "os", or any other confusingly similar designation without
# specific prior written permission from Alliance for Sustainable Energy, LLC.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# *******************************************************************************

require 'openstudio'
require 'openstudio/measure/ShowRunnerOutput'
require 'fileutils'

require_relative '../measure.rb'
require 'minitest/autorun'

class AddDaylightSensors_Test < Minitest::Test
  # def setup
  # end

  # def teardown
  # end

  def test_AddDaylightSensors
    # create an instance of the measure
    measure = AddDaylightSensors.new

    # create an instance of a runner
    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)

    # make an empty model
    model = OpenStudio::Model::Model.new

    # get arguments and test that they are what we are expecting
    arguments = measure.arguments(model)
    assert_equal(14, arguments.size)
    assert_equal('space_type', arguments[0].name)
    assert(!arguments[0].hasDefaultValue)

    # load the test model
    translator = OpenStudio::OSVersion::VersionTranslator.new
    path = OpenStudio::Path.new(File.dirname(__FILE__) + '/ModelForDaylightSensors.osm')
    model = translator.loadModel(path)
    assert(!model.empty?)
    model = model.get

    # set argument values to good values and run the measure on model with spaces
    arguments = measure.arguments(model)
    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)

    count = -1

    space_type = arguments[count += 1].clone
    assert(space_type.setValue('ASHRAE_189.1-2009_ClimateZone 4-8_LargeHotel_GuestRoom'))
    argument_map['space_type'] = space_type

    setpoint = arguments[count += 1].clone
    assert(setpoint.setValue(50.0))
    argument_map['setpoint'] = setpoint

    control_type = arguments[count += 1].clone
    assert(control_type.setValue('Continuous/Off'))
    argument_map['control_type'] = control_type

    min_power_fraction = arguments[count += 1].clone
    assert(min_power_fraction.setValue(0.3))
    argument_map['min_power_fraction'] = min_power_fraction

    min_light_fraction = arguments[count += 1].clone
    assert(min_light_fraction.setValue(0.2))
    argument_map['min_light_fraction'] = min_light_fraction

    fraction_zone_controlled = arguments[count += 1].clone
    assert(fraction_zone_controlled.setValue(0.2))
    argument_map['fraction_zone_controlled'] = fraction_zone_controlled

    height = arguments[count += 1].clone
    assert(height.setValue(30.0))
    argument_map['height'] = height

    material_cost = arguments[count += 1].clone
    assert(material_cost.setValue(5.0))
    argument_map['material_cost'] = material_cost

    demolition_cost = arguments[count += 1].clone
    assert(demolition_cost.setValue(1.0))
    argument_map['demolition_cost'] = demolition_cost

    years_until_costs_start = arguments[count += 1].clone
    assert(years_until_costs_start.setValue(0))
    argument_map['years_until_costs_start'] = years_until_costs_start

    demo_cost_initial_const = arguments[count += 1].clone
    assert(demo_cost_initial_const.setValue(false))
    argument_map['demo_cost_initial_const'] = demo_cost_initial_const

    expected_life = arguments[count += 1].clone
    assert(expected_life.setValue(20))
    argument_map['expected_life'] = expected_life

    om_cost = arguments[count += 1].clone
    assert(om_cost.setValue(0.25))
    argument_map['om_cost'] = om_cost

    om_frequency = arguments[count += 1].clone
    assert(om_frequency.setValue(1))
    argument_map['om_frequency'] = om_frequency

    measure.run(model, runner, argument_map)
    result = runner.result
    show_output(result)
    assert(result.value.valueName == 'Success')
    assert(result.warnings.size == 8)
    assert(result.info.size == 1)

    # save the model
    # output_file_path = OpenStudio::Path.new('C:\SVN_Utilities\OpenStudio\measures\test.osm')
    # model.save(output_file_path,true)
  end
end