# frozen_string_literal: true

# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'json'

module TencentCloud
  module Cbs
    module V20170312
      class Client < TencentCloud::Common::AbstractClient

        def initialize(credential, region, profile = nil)
            api_version = '2017-03-12'
            api_endpoint = 'cbs.tencentcloudapi.com'
            sdk_version = 'CBS_' + File.read(File.expand_path('../VERSION', __dir__)).strip
            super(credential, region, api_version, api_endpoint, sdk_version, profile)
        end


        # 本接口（ApplyDiskBackup）用于回滚备份点到原云硬盘。

        # * 仅支持回滚到原云硬盘上。对于数据盘备份点，如果您需要复制备份点数据到其它云硬盘上，请先使用 CreateSnapshot 将备份点转换为快照，然后使用 CreateDisks 接口创建新的弹性云硬盘，将快照数据复制到新购云硬盘上。
        # * 用于回滚的备份点必须处于NORMAL状态。备份点状态可以通过DescribeDiskBackups接口查询，见输出参数中BackupState字段解释。
        # * 如果是弹性云硬盘，则云硬盘必须处于未挂载状态，云硬盘挂载状态可以通过DescribeDisks接口查询，见Attached字段解释；如果是随实例一起购买的非弹性云硬盘，则实例必须处于关机状态，实例状态可以通过DescribeInstancesStatus接口查询。

        # @param request: Request instance for ApplyDiskBackup.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ApplyDiskBackupRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ApplyDiskBackupResponse`
        def ApplyDiskBackup(request)
          body = send_request('ApplyDiskBackup', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ApplyDiskBackupResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ApplySnapshot）用于回滚快照到原云硬盘。

        # * 仅支持回滚到原云硬盘上。对于数据盘快照，如果您需要复制快照数据到其它云硬盘上，请使用[CreateDisks](/document/product/362/16312)接口创建新的弹性云盘，将快照数据复制到新购云盘上。
        # * 用于回滚的快照必须处于NORMAL状态。快照状态可以通过[DescribeSnapshots](/document/product/362/15647)接口查询，见输出参数中SnapshotState字段解释。
        # * 如果是弹性云盘，则云盘必须处于未挂载状态，云硬盘挂载状态可以通过[DescribeDisks](/document/product/362/16315)接口查询，见Attached字段解释；如果是随实例一起购买的非弹性云盘，则实例必须处于关机状态，实例状态可以通过[DescribeInstancesStatus](/document/product/213/15738)接口查询。

        # @param request: Request instance for ApplySnapshot.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ApplySnapshotRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ApplySnapshotResponse`
        def ApplySnapshot(request)
          body = send_request('ApplySnapshot', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ApplySnapshotResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（AttachDisks）用于挂载云硬盘。

        # * 支持批量操作，将多块云盘挂载到同一云主机。如果多个云盘中存在不允许挂载的云盘，则操作不执行，返回特定的错误码。
        # * 本接口为异步接口，当挂载云盘的请求成功返回时，表示后台已发起挂载云盘的操作，可通过接口[DescribeDisks](/document/product/362/16315)来查询对应云盘的状态，如果云盘的状态由“ATTACHING”变为“ATTACHED”，则为挂载成功。

        # @param request: Request instance for AttachDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::AttachDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::AttachDisksResponse`
        def AttachDisks(request)
          body = send_request('AttachDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = AttachDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（BindAutoSnapshotPolicy）用于绑定云硬盘到指定的定期快照策略。

        # * 每个地域下的定期快照策略配额限制请参考文档[定期快照](/document/product/362/8191)。
        # * 当已绑定定期快照策略的云硬盘处于未使用状态（即弹性云盘未挂载或非弹性云盘的主机处于关机状态）将不会创建定期快照。

        # @param request: Request instance for BindAutoSnapshotPolicy.
        # @type request: :class:`Tencentcloud::cbs::V20170312::BindAutoSnapshotPolicyRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::BindAutoSnapshotPolicyResponse`
        def BindAutoSnapshotPolicy(request)
          body = send_request('BindAutoSnapshotPolicy', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = BindAutoSnapshotPolicyResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（CopySnapshotCrossRegions）用于快照跨地域复制。

        # * 本接口为异步接口，当跨地域复制的请求下发成功后会返回一个新的快照ID，此时快照未立即复制到目标地域，可请求目标地域的[DescribeSnapshots](/document/product/362/15647)接口查询新快照的状态，判断是否复制完成。如果快照的状态为“NORMAL”，表示快照复制完成。
        # * 本接口实现的快照跨地域复制操作将产生跨地域流量，预计2022年第三季度会针对此功能进行商业化计费；请留意后续站内信公告，避免产生预期外扣费。

        # @param request: Request instance for CopySnapshotCrossRegions.
        # @type request: :class:`Tencentcloud::cbs::V20170312::CopySnapshotCrossRegionsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::CopySnapshotCrossRegionsResponse`
        def CopySnapshotCrossRegions(request)
          body = send_request('CopySnapshotCrossRegions', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = CopySnapshotCrossRegionsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（CreateAutoSnapshotPolicy）用于创建定期快照策略。

        # * 每个地域可创建的定期快照策略数量限制请参考文档[定期快照](/document/product/362/8191)。
        # * 每个地域可创建的快照有数量和容量的限制，具体请见腾讯云控制台快照页面提示，如果快照超配额，定期快照创建会失败。

        # @param request: Request instance for CreateAutoSnapshotPolicy.
        # @type request: :class:`Tencentcloud::cbs::V20170312::CreateAutoSnapshotPolicyRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::CreateAutoSnapshotPolicyResponse`
        def CreateAutoSnapshotPolicy(request)
          body = send_request('CreateAutoSnapshotPolicy', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = CreateAutoSnapshotPolicyResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（CreateDisks）用于创建云硬盘。

        # * 预付费云盘的购买会预先扣除本次云盘购买所需金额，在调用本接口前请确保账户余额充足。
        # * 本接口支持传入数据盘快照来创建云盘，实现将快照数据复制到新购云盘上。
        # * 本接口为异步接口，当创建请求下发成功后会返回一个新建的云盘ID列表，此时云盘的创建并未立即完成。可以通过调用[DescribeDisks](/document/product/362/16315)接口根据DiskId查询对应云盘，如果能查到云盘，且状态为'UNATTACHED'或'ATTACHED'，则表示创建成功。

        # @param request: Request instance for CreateDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::CreateDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::CreateDisksResponse`
        def CreateDisks(request)
          body = send_request('CreateDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = CreateDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（CreateSnapshot）用于对指定云盘创建快照。

        # * 只有具有快照能力的云硬盘才能创建快照。云硬盘是否具有快照能力可由[DescribeDisks](/document/product/362/16315)接口查询，见SnapshotAbility字段。
        # * 可创建快照数量限制见[产品使用限制](https://cloud.tencent.com/doc/product/362/5145)。
        # * 当前支持将备份点转化为普通快照，转化之后可能会收取快照使用费用，备份点不保留，其占用的备份点配额也将被释放。

        # @param request: Request instance for CreateSnapshot.
        # @type request: :class:`Tencentcloud::cbs::V20170312::CreateSnapshotRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::CreateSnapshotResponse`
        def CreateSnapshot(request)
          body = send_request('CreateSnapshot', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = CreateSnapshotResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DeleteAutoSnapshotPolicies）用于删除定期快照策略。

        # *  支持批量操作。如果多个定期快照策略存在无法删除的，则操作不执行，以特定错误码返回。

        # @param request: Request instance for DeleteAutoSnapshotPolicies.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DeleteAutoSnapshotPoliciesRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DeleteAutoSnapshotPoliciesResponse`
        def DeleteAutoSnapshotPolicies(request)
          body = send_request('DeleteAutoSnapshotPolicies', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DeleteAutoSnapshotPoliciesResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 批量删除指定的云硬盘备份点。

        # @param request: Request instance for DeleteDiskBackups.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DeleteDiskBackupsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DeleteDiskBackupsResponse`
        def DeleteDiskBackups(request)
          body = send_request('DeleteDiskBackups', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DeleteDiskBackupsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DeleteSnapshots）用于删除快照。

        # * 快照必须处于NORMAL状态，快照状态可以通过[DescribeSnapshots](/document/product/362/15647)接口查询，见输出参数中SnapshotState字段解释。
        # * 支持批量操作。如果多个快照存在无法删除的快照，则操作不执行，以特定的错误码返回。

        # @param request: Request instance for DeleteSnapshots.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DeleteSnapshotsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DeleteSnapshotsResponse`
        def DeleteSnapshots(request)
          body = send_request('DeleteSnapshots', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DeleteSnapshotsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeAutoSnapshotPolicies）用于查询定期快照策略。

        # * 可以根据定期快照策略ID、名称或者状态等信息来查询定期快照策略的详细信息，不同条件之间为与(AND)的关系，过滤信息详细请见过滤器`Filter`。
        # * 如果参数为空，返回当前用户一定数量（`Limit`所指定的数量，默认为20）的定期快照策略表。

        # @param request: Request instance for DescribeAutoSnapshotPolicies.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeAutoSnapshotPoliciesRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeAutoSnapshotPoliciesResponse`
        def DescribeAutoSnapshotPolicies(request)
          body = send_request('DescribeAutoSnapshotPolicies', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeAutoSnapshotPoliciesResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeDiskAssociatedAutoSnapshotPolicy）用于查询云盘绑定的定期快照策略。

        # @param request: Request instance for DescribeDiskAssociatedAutoSnapshotPolicy.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDiskAssociatedAutoSnapshotPolicyRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDiskAssociatedAutoSnapshotPolicyResponse`
        def DescribeDiskAssociatedAutoSnapshotPolicy(request)
          body = send_request('DescribeDiskAssociatedAutoSnapshotPolicy', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDiskAssociatedAutoSnapshotPolicyResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeDiskBackups）用于查询备份点的详细信息。

        # 根据备份点ID、创建备份点的云硬盘ID、创建备份点的云硬盘类型等对结果进行过滤，不同条件之间为与(AND)的关系，过滤信息详细请见过滤器Filter。
        # 如果参数为空，返回当前用户一定数量（Limit所指定的数量，默认为20）的备份点列表。

        # @param request: Request instance for DescribeDiskBackups.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDiskBackupsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDiskBackupsResponse`
        def DescribeDiskBackups(request)
          body = send_request('DescribeDiskBackups', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDiskBackupsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeDiskConfigQuota）用于查询云硬盘配额。

        # @param request: Request instance for DescribeDiskConfigQuota.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDiskConfigQuotaRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDiskConfigQuotaResponse`
        def DescribeDiskConfigQuota(request)
          body = send_request('DescribeDiskConfigQuota', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDiskConfigQuotaResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 查询云盘操作日志功能已迁移至LookUpEvents接口（https://cloud.tencent.com/document/product/629/12359），本接口（DescribeDiskOperationLogs）即将下线，后续不再提供调用，请知悉。

        # @param request: Request instance for DescribeDiskOperationLogs.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDiskOperationLogsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDiskOperationLogsResponse`
        def DescribeDiskOperationLogs(request)
          body = send_request('DescribeDiskOperationLogs', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDiskOperationLogsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeDiskStoragePool）查询用户的云硬盘独享集群列表。

        # * 可以根据独享集群ID(CdcId)、可用区(zone)等信息来查询和过滤云硬盘独享集群详细信息，不同的过滤条件之间为与(AND)的关系，过滤信息详细请见过滤器`Filter`。
        # * 如果参数为空，返回当前用户一定数量（`Limit`所指定的数量，默认为20）的云硬盘独享集群列表。

        # @param request: Request instance for DescribeDiskStoragePool.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDiskStoragePoolRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDiskStoragePoolResponse`
        def DescribeDiskStoragePool(request)
          body = send_request('DescribeDiskStoragePool', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDiskStoragePoolResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeDisks）用于查询云硬盘列表。

        # * 可以根据云硬盘ID、云硬盘类型或者云硬盘状态等信息来查询云硬盘的详细信息，不同条件之间为与(AND)的关系，过滤信息详细请见过滤器`Filter`。
        # * 如果参数为空，返回当前用户一定数量（`Limit`所指定的数量，默认为20）的云硬盘列表。

        # @param request: Request instance for DescribeDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeDisksResponse`
        def DescribeDisks(request)
          body = send_request('DescribeDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeInstancesDiskNum）用于查询实例已挂载云硬盘数量。

        # * 支持批量操作，当传入多个云服务器实例ID，返回结果会分别列出每个云服务器挂载的云硬盘数量。

        # @param request: Request instance for DescribeInstancesDiskNum.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeInstancesDiskNumRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeInstancesDiskNumResponse`
        def DescribeInstancesDiskNum(request)
          body = send_request('DescribeInstancesDiskNum', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeInstancesDiskNumResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeSnapshotOperationLogs）用于查询快照操作日志列表。

        # 可根据快照ID过滤。快照ID形如：snap-a1kmcp13。

        # @param request: Request instance for DescribeSnapshotOperationLogs.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotOperationLogsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotOperationLogsResponse`
        def DescribeSnapshotOperationLogs(request)
          body = send_request('DescribeSnapshotOperationLogs', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeSnapshotOperationLogsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeSnapshotSharePermission）用于查询快照的分享信息。

        # @param request: Request instance for DescribeSnapshotSharePermission.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotSharePermissionRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotSharePermissionResponse`
        def DescribeSnapshotSharePermission(request)
          body = send_request('DescribeSnapshotSharePermission', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeSnapshotSharePermissionResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DescribeSnapshots）用于查询快照的详细信息。

        # * 根据快照ID、创建快照的云硬盘ID、创建快照的云硬盘类型等对结果进行过滤，不同条件之间为与(AND)的关系，过滤信息详细请见过滤器`Filter`。
        # *  如果参数为空，返回当前用户一定数量（`Limit`所指定的数量，默认为20）的快照列表。

        # @param request: Request instance for DescribeSnapshots.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotsRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DescribeSnapshotsResponse`
        def DescribeSnapshots(request)
          body = send_request('DescribeSnapshots', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DescribeSnapshotsResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（DetachDisks）用于卸载云硬盘。

        # * 支持批量操作，卸载挂载在同一主机上的多块云盘。如果多块云盘中存在不允许卸载的云盘，则操作不执行，返回特定的错误码。
        # * 本接口为异步接口，当请求成功返回时，云盘并未立即从主机卸载，可通过接口[DescribeDisks](/document/product/362/16315)来查询对应云盘的状态，如果云盘的状态由“ATTACHED”变为“UNATTACHED”，则为卸载成功。

        # @param request: Request instance for DetachDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::DetachDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::DetachDisksResponse`
        def DetachDisks(request)
          body = send_request('DetachDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = DetachDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 获取快照概览信息

        # @param request: Request instance for GetSnapOverview.
        # @type request: :class:`Tencentcloud::cbs::V20170312::GetSnapOverviewRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::GetSnapOverviewResponse`
        def GetSnapOverview(request)
          body = send_request('GetSnapOverview', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = GetSnapOverviewResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 重新初始化云硬盘至云硬盘初始创建时的状态。使用云硬盘的重新初始化功能时需要注意以下4点：
        # 1. 如果云硬盘是由快照创建的，则重新初始化会通过此快照重新回滚此云硬盘，即将云硬盘恢复为与快照一致的状态；
        # 2. 如果云硬盘不是通过快照创建的，则重新初始化会清空此云硬盘的数据；请在重新初始化云硬盘前检查并备份必要的数据；
        # 3. 当前仅未挂载的、非共享属性的数据盘云硬盘支持重新初始化；
        # 4. 当创建此云硬盘的原始快照被删除时，不再支持重新初始化此云硬盘。

        # @param request: Request instance for InitializeDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InitializeDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InitializeDisksResponse`
        def InitializeDisks(request)
          body = send_request('InitializeDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InitializeDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（InquirePricePriceModifyDiskBackupQuota）用于修改云硬盘备份点配额询价。

        # @param request: Request instance for InquirePriceModifyDiskBackupQuota.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InquirePriceModifyDiskBackupQuotaRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InquirePriceModifyDiskBackupQuotaResponse`
        def InquirePriceModifyDiskBackupQuota(request)
          body = send_request('InquirePriceModifyDiskBackupQuota', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InquirePriceModifyDiskBackupQuotaResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（InquirePriceModifyDiskExtraPerformance）用于调整云硬盘额外性能询价。

        # @param request: Request instance for InquirePriceModifyDiskExtraPerformance.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InquirePriceModifyDiskExtraPerformanceRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InquirePriceModifyDiskExtraPerformanceResponse`
        def InquirePriceModifyDiskExtraPerformance(request)
          body = send_request('InquirePriceModifyDiskExtraPerformance', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InquirePriceModifyDiskExtraPerformanceResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（InquiryPriceCreateDisks）用于创建云硬盘询价。

        # * 支持查询创建多块云硬盘的价格，此时返回结果为总价格。

        # @param request: Request instance for InquiryPriceCreateDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InquiryPriceCreateDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InquiryPriceCreateDisksResponse`
        def InquiryPriceCreateDisks(request)
          body = send_request('InquiryPriceCreateDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InquiryPriceCreateDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（InquiryPriceRenewDisks）用于续费云硬盘询价。

        # * 只支持查询预付费模式的弹性云盘续费价格。
        # * 支持与挂载实例一起续费的场景，需要在[DiskChargePrepaid](/document/product/362/15669#DiskChargePrepaid)参数中指定CurInstanceDeadline，此时会按对齐到实例续费后的到期时间来续费询价。
        # * 支持为多块云盘指定不同的续费时长，此时返回的价格为多块云盘续费的总价格。

        # @param request: Request instance for InquiryPriceRenewDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InquiryPriceRenewDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InquiryPriceRenewDisksResponse`
        def InquiryPriceRenewDisks(request)
          body = send_request('InquiryPriceRenewDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InquiryPriceRenewDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（InquiryPriceResizeDisk）用于扩容云硬盘询价。

        # * 只支持预付费模式的云硬盘扩容询价。

        # @param request: Request instance for InquiryPriceResizeDisk.
        # @type request: :class:`Tencentcloud::cbs::V20170312::InquiryPriceResizeDiskRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::InquiryPriceResizeDiskResponse`
        def InquiryPriceResizeDisk(request)
          body = send_request('InquiryPriceResizeDisk', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = InquiryPriceResizeDiskResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ModifyAutoSnapshotPolicyAttribute）用于修改定期快照策略属性。

        # * 可通过该接口修改定期快照策略的执行策略、名称、是否激活等属性。
        # * 修改保留天数时必须保证不与是否永久保留属性冲突，否则整个操作失败，以特定的错误码返回。

        # @param request: Request instance for ModifyAutoSnapshotPolicyAttribute.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyAutoSnapshotPolicyAttributeRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyAutoSnapshotPolicyAttributeResponse`
        def ModifyAutoSnapshotPolicyAttribute(request)
          body = send_request('ModifyAutoSnapshotPolicyAttribute', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyAutoSnapshotPolicyAttributeResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # * 只支持修改弹性云盘的项目ID。随云主机创建的云硬盘项目ID与云主机联动。可以通过[DescribeDisks](/document/product/362/16315)接口查询，见输出参数中Portable字段解释。
        # * “云硬盘名称”仅为方便用户自己管理之用，腾讯云并不以此名称作为提交工单或是进行云盘管理操作的依据。
        # * 支持批量操作，如果传入多个云盘ID，则所有云盘修改为同一属性。如果存在不允许操作的云盘，则操作不执行，以特定错误码返回。

        # @param request: Request instance for ModifyDiskAttributes.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyDiskAttributesRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyDiskAttributesResponse`
        def ModifyDiskAttributes(request)
          body = send_request('ModifyDiskAttributes', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyDiskAttributesResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 此接口 (ModifyDiskBackupQuota) 用于修改云硬盘备份点配额。

        # @param request: Request instance for ModifyDiskBackupQuota.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyDiskBackupQuotaRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyDiskBackupQuotaResponse`
        def ModifyDiskBackupQuota(request)
          body = send_request('ModifyDiskBackupQuota', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyDiskBackupQuotaResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ModifyDiskExtraPerformance）用于调整云硬盘额外的性能。

        # * 目前仅支持极速型SSD云硬盘（CLOUD_TSSD）和高性能SSD云硬盘(CLOUD_HSSD)。

        # @param request: Request instance for ModifyDiskExtraPerformance.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyDiskExtraPerformanceRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyDiskExtraPerformanceResponse`
        def ModifyDiskExtraPerformance(request)
          body = send_request('ModifyDiskExtraPerformance', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyDiskExtraPerformanceResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 接口请求域名： cbs.tencentcloudapi.com 。

        # 本接口 (ModifyDisksChargeType) 用于切换云盘的计费模式。

        # 只支持从 POSTPAID_BY_HOUR 计费模式切换为PREPAID计费模式。
        # 非弹性云盘不支持此接口，请通过修改实例计费模式接口将实例连同非弹性云盘一起转换。
        # 默认接口请求频率限制：10次/秒。

        # @param request: Request instance for ModifyDisksChargeType.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyDisksChargeTypeRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyDisksChargeTypeResponse`
        def ModifyDisksChargeType(request)
          body = send_request('ModifyDisksChargeType', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyDisksChargeTypeResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ModifyDisksRenewFlag）用于修改云硬盘续费标识，支持批量修改。

        # @param request: Request instance for ModifyDisksRenewFlag.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifyDisksRenewFlagRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifyDisksRenewFlagResponse`
        def ModifyDisksRenewFlag(request)
          body = send_request('ModifyDisksRenewFlag', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifyDisksRenewFlagResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ModifySnapshotAttribute）用于修改指定快照的属性。

        # * 当前仅支持修改快照名称及将非永久快照修改为永久快照。
        # * “快照名称”仅为方便用户自己管理之用，腾讯云并不以此名称作为提交工单或是进行快照管理操作的依据。

        # @param request: Request instance for ModifySnapshotAttribute.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifySnapshotAttributeRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifySnapshotAttributeResponse`
        def ModifySnapshotAttribute(request)
          body = send_request('ModifySnapshotAttribute', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifySnapshotAttributeResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ModifySnapshotsSharePermission）用于修改快照分享信息。

        # 分享快照后，被分享账户可以通过该快照创建云硬盘。
        # * 每个快照最多可分享给50个账户。
        # * 分享快照无法更改名称，描述，仅可用于创建云硬盘。
        # * 只支持分享到对方账户相同地域。
        # * 仅支持分享数据盘快照。

        # @param request: Request instance for ModifySnapshotsSharePermission.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ModifySnapshotsSharePermissionRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ModifySnapshotsSharePermissionResponse`
        def ModifySnapshotsSharePermission(request)
          body = send_request('ModifySnapshotsSharePermission', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ModifySnapshotsSharePermissionResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（RenewDisk）用于续费云硬盘。

        # * 只支持预付费的云硬盘。云硬盘类型可以通过[DescribeDisks](/document/product/362/16315)接口查询，见输出参数中DiskChargeType字段解释。
        # * 支持与挂载实例一起续费的场景，需要在[DiskChargePrepaid](/document/product/362/15669#DiskChargePrepaid)参数中指定CurInstanceDeadline，此时会按对齐到子机续费后的到期时间来续费。

        # @param request: Request instance for RenewDisk.
        # @type request: :class:`Tencentcloud::cbs::V20170312::RenewDiskRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::RenewDiskResponse`
        def RenewDisk(request)
          body = send_request('RenewDisk', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = RenewDiskResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（ResizeDisk）用于扩容云硬盘。

        # * 只支持扩容弹性云盘。云硬盘类型可以通过[DescribeDisks](/document/product/362/16315)接口查询，见输出参数中Portable字段解释。非弹性云硬盘需通过[ResizeInstanceDisks](/document/product/213/15731)接口扩容。
        # * 本接口为异步接口，接口成功返回时，云盘并未立即扩容到指定大小，可通过接口[DescribeDisks](/document/product/362/16315)来查询对应云盘的状态，如果云盘的状态为“EXPANDING”，表示正在扩容中。

        # @param request: Request instance for ResizeDisk.
        # @type request: :class:`Tencentcloud::cbs::V20170312::ResizeDiskRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::ResizeDiskResponse`
        def ResizeDisk(request)
          body = send_request('ResizeDisk', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = ResizeDiskResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（TerminateDisks）用于退还云硬盘。

        # * 不再使用的云盘，可通过本接口主动退还。
        # * 本接口支持退还预付费云盘和按小时后付费云盘。按小时后付费云盘可直接退还，预付费云盘需符合退还规则。
        # * 支持批量操作，每次请求批量云硬盘的上限为100。如果批量云盘存在不允许操作的，请求会以特定错误码返回。

        # @param request: Request instance for TerminateDisks.
        # @type request: :class:`Tencentcloud::cbs::V20170312::TerminateDisksRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::TerminateDisksResponse`
        def TerminateDisks(request)
          body = send_request('TerminateDisks', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = TerminateDisksResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end

        # 本接口（UnbindAutoSnapshotPolicy）用于解除云硬盘绑定的定期快照策略。

        # * 支持批量操作，可一次解除多个云盘与同一定期快照策略的绑定。
        # * 如果传入的云盘未绑定到当前定期快照策略，接口将自动跳过，仅解绑与当前定期快照策略绑定的云盘。

        # @param request: Request instance for UnbindAutoSnapshotPolicy.
        # @type request: :class:`Tencentcloud::cbs::V20170312::UnbindAutoSnapshotPolicyRequest`
        # @rtype: :class:`Tencentcloud::cbs::V20170312::UnbindAutoSnapshotPolicyResponse`
        def UnbindAutoSnapshotPolicy(request)
          body = send_request('UnbindAutoSnapshotPolicy', request.serialize)
          response = JSON.parse(body)
          if response['Response'].key?('Error') == false
            model = UnbindAutoSnapshotPolicyResponse.new
            model.deserialize(response['Response'])
            model
          else
            code = response['Response']['Error']['Code']
            message = response['Response']['Error']['Message']
            reqid = response['Response']['RequestId']
            raise TencentCloud::Common::TencentCloudSDKException.new(code, message, reqid)
          end
        rescue TencentCloud::Common::TencentCloudSDKException => e
          raise e
        rescue StandardError => e
          raise TencentCloud::Common::TencentCloudSDKException.new(nil, e.inspect)
        end


      end
    end
  end
end