A Groonga package provides a C library (libgroonga) and a command line tool (groonga). This tutorial explains how to use the command line tool, with which you can create/operate databases, start a server, establish a connection with a server, etc.
The first step to using Groonga is to create a new database. The following shows how to do it.
Form:
日本語版はこちらgroonga -n DB_PATH
The -n option specifies to create a new database and DB_PATH specifies the path of the new database. Actually, a database consists of a series of files and DB_PATH specifies the file which will be the entrance to the new database. DB_PATH also specifies the path prefix for other files. Note that database creation fails if DB_PATH points to an existing file.
This command creates a new database and then enters into interactive mode in which Groonga prompts you to enter commands for operating that database. You can terminate this mode with Ctrl-d.
Execution example:
% groonga -n /tmp/groonga-databases/introduction.db
After this database creation, you can find a series of files in /tmp/groonga-databases.
The following shows how to operate an existing database.
Form:
groonga DB_PATH [COMMAND]
DB_PATH specifies the path of a target database. This command fails if the specified database does not exist.
If COMMAND is specified, Groonga executes COMMAND and returns the result. Otherwise, Groonga starts in interactive mode that reads commands from the standard input and executes them one by one. This tutorial focuses on the interactive mode.
Let's see the status of a Groonga process by using a status command.
Execution example:
% groonga /tmp/groonga-databases/introduction.db
status
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# {
# "uptime": 0,
# "max_command_version": 2,
# "n_queries": 0,
# "cache_hit_rate": 0.0,
# "version": "4.0.1",
# "alloc_count": 161,
# "command_version": 1,
# "starttime": 1395806057,
# "default_command_version": 1
# }
# ]
As shown in the above example, a command returns a JSON array. The first element contains an error code, execution time, etc. The second element is the result of an operation.
Commands for operating a database accept arguments as follows:
Form_1: COMMAND VALUE_1 VALUE_2 ..
Form_2: COMMAND --NAME_1 VALUE_1 --NAME_2 VALUE_2 ..
In the first form, arguments must be passed in order. This kind of arguments are called positional arguments because the position of each argument determines its meaning.
In the second form, you can specify a parameter name with its value. So, the order of arguments is not defined. This kind of arguments are known as named parameters or keyword arguments.
If you want to specify a value which contains white-spaces or special characters, such as quotes and parentheses, please enclose the value with single-quotes or double-quotes.
For details, see also the paragraph of "command" in groonga command.
- status
- shows status of a Groonga process.
- table_list
- shows a list of tables in a database.
- column_list
- shows a list of columns in a table.
- table_create
- adds a table to a database.
- column_create
- adds a column to a table.
- select
- searches records from a table and shows the result.
- load
- inserts records to a table.
A table_create command creates a new table.
In most cases, a table has a primary key which must be specified with its data type and index type.
There are various data types such as integers, strings, etc. See also データ型 for more details. The index type determines the search performance and the availability of prefix searches. The details will be described later.
Let's create a table. The following example creates a table with a primary key. The name parameter specifies the name of the table. The flags parameter specifies the index type for the primary key. The key_type parameter specifies the data type of the primary key.
Execution example:
table_create --name Site --flags TABLE_HASH_KEY --key_type ShortText
# [[0, 1337566253.89858, 0.000355720520019531], true]
The second element of the result indicates that the operation succeeded.
A select command can enumerate records in a table.
Execution example:
select --table Site
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 0
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ]
# ]
# ]
# ]
# ]
When only a table name is specified with a table parameter, a select command returns the first (at most) 10 records in the table. [0] in the result shows the number of records in the table. The next array is a list of columns. ["_id","Uint32"] is a column of UInt32, named _id. ["_key","ShortText"] is a column of ShortText, named _key.
The above two columns, _id and _key, are the necessary columns. The _id column stores IDs those are automatically allocated by Groonga. The _key column is associated with the primary key. You are not allowed to rename these columns.
A column_create command creates a new column.
Let's add a column. The following example adds a column to the Site table. The table parameter specifies the target table. The name parameter specifies the name of the column. The type parameter specifies the data type of the column.
Execution example:
column_create --table Site --name title --type ShortText
# [[0, 1337566253.89858, 0.000355720520019531], true]
select --table Site
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 0
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ]
# ]
# ]
# ]
A load command loads JSON-formatted records into a table.
The following example loads nine records into the Site table.
Execution example:
load --table Site
[
{"_key":"http://example.org/","title":"This is test record 1!"},
{"_key":"http://example.net/","title":"test record 2."},
{"_key":"http://example.com/","title":"test test record three."},
{"_key":"http://example.net/afr","title":"test record four."},
{"_key":"http://example.org/aba","title":"test test test record five."},
{"_key":"http://example.com/rab","title":"test test test test record six."},
{"_key":"http://example.net/atv","title":"test test test record seven."},
{"_key":"http://example.org/gat","title":"test test record eight."},
{"_key":"http://example.com/vdw","title":"test test record nine."},
]
# [[0, 1337566253.89858, 0.000355720520019531], 9]
The second element of the result indicates how many records were successfully loaded. In this case, all the records are successfully loaded.
Let's make sure that these records are correctly stored.
Execution example:
select --table Site
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ],
# [
# 2,
# "http://example.net/",
# "test record 2."
# ],
# [
# 3,
# "http://example.com/",
# "test test record three."
# ],
# [
# 4,
# "http://example.net/afr",
# "test record four."
# ],
# [
# 5,
# "http://example.org/aba",
# "test test test record five."
# ],
# [
# 6,
# "http://example.com/rab",
# "test test test test record six."
# ],
# [
# 7,
# "http://example.net/atv",
# "test test test record seven."
# ],
# [
# 8,
# "http://example.org/gat",
# "test test record eight."
# ],
# [
# 9,
# "http://example.com/vdw",
# "test test record nine."
# ]
# ]
# ]
# ]
A select command can search records in a table.
If a search condition is specified with a query parameter, a select command searches records matching the search condition and returns the matched records.
Let's get a record having a specified record ID. The following example gets the first record in the Site table. More precisely, the query parameter specifies a record whose _id column stores 1.
Execution example:
select --table Site --query _id:1
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 1
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ]
# ]
# ]
# ]
Next, let's get a record having a specified key. The following example gets the record whose primary key is "http://example.org/". More precisely, the query parameter specifies a record whose _key column stores "http://example.org/".
Execution example:
select --table Site --query '_key:"http://example.org/"'
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 1
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ]
# ]
# ]
# ]
Let's go on to how to make full text search.
Groonga uses an inverted index to provide fast full text search. So, the first step is to create a lexicon table which stores an inverted index, also known as postings lists. The primary key of this table is associated with a vocabulary made up of index terms and each record stores postings lists for one index term.
The following shows a command which creates a lexicon table named Terms. The data type of its primary key is ShortText.
Execution example:
table_create --name Terms --flags TABLE_PAT_KEY|KEY_NORMALIZE --key_type ShortText --default_tokenizer TokenBigram
# [[0, 1337566253.89858, 0.000355720520019531], true]
The table_create command takes many parameters but you don't need to understand all of them. Please skip the next paragraph if you are not interested in how it works.
The TABLE_PAT_KEY flag specifies to store index terms in a patricia trie. The KEY_NORMALIZE flag specifies to normalize index terms. In this example, both flags are validated by using a '|'. The default_tokenizer parameter specifies the method for tokenizing text. This example uses TokenBigram that is generally called N-gram.
The second step is to create an index column, which allows you to search records from its associated column. That is to say this step specifies which column needs an index.
Let's create an index column. The following example creates an index column for a column in the Site table.
Execution example:
column_create --table Terms --name blog_title --flags COLUMN_INDEX|WITH_POSITION --type Site --source title
# [[0, 1337566253.89858, 0.000355720520019531], true]
The table parameter specifies the index table and the name parameter specifies the index column. The type parameter specifies the target table and the source parameter specifies the target column. The COLUMN_INDEX flag specifies to create an index column and the WITH_POSITION flag specifies to create a full inverted index, which contains the positions of each index term. This combination, COLUMN_INDEX|WITH_POSITION, is recommended for the general purpose.
Note
You can create a lexicon table and index columns before/during/after loading records. If a target column already has records, Groonga creates an inverted index in a static manner. In contrast, if you load records into an already indexed column, Groonga updates the inverted index in a dynamic manner.
It's time. You can make full text search with a select command.
A query for full text search is specified with a query parameter. The following example searches records whose "title" column contains "this". The '@' specifies to make full text search. Note that a lower case query matches upper case and capitalized terms in a record if KEY_NORMALIZE was specified when creating a lexcon table.
Execution example:
select --table Site --query title:@this
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 1
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ]
# ]
# ]
# ]
In this example, the first record matches the query because its title contains "This", that is the capitalized form of the query.
A select command accepts an optional parameter, named match_columns, that specifies the default target columns. This parameter is used if target columns are not specified in a query. [1]
The combination of "--match_columns title" and "--query this" brings you the same result that "--query title:@this" does.
Execution example:
select --table Site --match_columns title --query this
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 1
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ]
# ]
# ]
# ]
An output_columns parameter of a select command specifies columns to appear in the search result. If you want to specify more than one columns, please separate column names by commas (',').
Execution example:
select --table Site --output_columns _key,title,_score --query title:@test
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ],
# [
# "_score",
# "Int32"
# ]
# ],
# [
# "http://example.org/",
# "This is test record 1!",
# 1
# ],
# [
# "http://example.net/",
# "test record 2.",
# 1
# ],
# [
# "http://example.com/",
# "test test record three.",
# 2
# ],
# [
# "http://example.net/afr",
# "test record four.",
# 1
# ],
# [
# "http://example.org/aba",
# "test test test record five.",
# 3
# ],
# [
# "http://example.com/rab",
# "test test test test record six.",
# 4
# ],
# [
# "http://example.net/atv",
# "test test test record seven.",
# 3
# ],
# [
# "http://example.org/gat",
# "test test record eight.",
# 2
# ],
# [
# "http://example.com/vdw",
# "test test record nine.",
# 2
# ]
# ]
# ]
# ]
This example specifies three output columns including the _score column, which stores the relevance score of each record.
A select command returns a part of its search result if offset and/or limit parameters are specified. These parameters are useful to paginate a search result, a widely-used interface which shows a search result on a page by page basis.
An offset parameter specifies the starting point and a limit parameter specifies the maximum number of records to be returned. If you need the first record in a search result, the offset parameter must be 0 or omitted.
Execution example:
select --table Site --offset 0 --limit 3
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ],
# [
# 2,
# "http://example.net/",
# "test record 2."
# ],
# [
# 3,
# "http://example.com/",
# "test test record three."
# ]
# ]
# ]
# ]
select --table Site --offset 3 --limit 3
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 4,
# "http://example.net/afr",
# "test record four."
# ],
# [
# 5,
# "http://example.org/aba",
# "test test test record five."
# ],
# [
# 6,
# "http://example.com/rab",
# "test test test test record six."
# ]
# ]
# ]
# ]
select --table Site --offset 7 --limit 3
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 8,
# "http://example.org/gat",
# "test test record eight."
# ],
# [
# 9,
# "http://example.com/vdw",
# "test test record nine."
# ]
# ]
# ]
# ]
A select command sorts its result when used with a sortby parameter.
A sortby parameter specifies a column as a sorting creteria. A search result is arranged in ascending order of the column values. If you want to sort a search result in reverse order, please add a leading hyphen ('-') to the column name in a parameter.
The following example shows records in the Site table in reverse order.
Execution example:
select --table Site --sortby -_id
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_key",
# "ShortText"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 9,
# "http://example.com/vdw",
# "test test record nine."
# ],
# [
# 8,
# "http://example.org/gat",
# "test test record eight."
# ],
# [
# 7,
# "http://example.net/atv",
# "test test test record seven."
# ],
# [
# 6,
# "http://example.com/rab",
# "test test test test record six."
# ],
# [
# 5,
# "http://example.org/aba",
# "test test test record five."
# ],
# [
# 4,
# "http://example.net/afr",
# "test record four."
# ],
# [
# 3,
# "http://example.com/",
# "test test record three."
# ],
# [
# 2,
# "http://example.net/",
# "test record 2."
# ],
# [
# 1,
# "http://example.org/",
# "This is test record 1!"
# ]
# ]
# ]
# ]
The next example uses the _score column as the sorting criteria for ranking the search result. The result is sorted in relevance order.
Execution example:
select --table Site --query title:@test --output_columns _id,_score,title --sortby -_score
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_score",
# "Int32"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 6,
# 4,
# "test test test test record six."
# ],
# [
# 5,
# 3,
# "test test test record five."
# ],
# [
# 7,
# 3,
# "test test test record seven."
# ],
# [
# 8,
# 2,
# "test test record eight."
# ],
# [
# 3,
# 2,
# "test test record three."
# ],
# [
# 9,
# 2,
# "test test record nine."
# ],
# [
# 1,
# 1,
# "This is test record 1!"
# ],
# [
# 4,
# 1,
# "test record four."
# ],
# [
# 2,
# 1,
# "test record 2."
# ]
# ]
# ]
# ]
If you want to specify more than one columns, please separate column names by commas (','). In such a case, a search result is sorted in order of the values in the first column, and then records having the same values in the first column are sorted in order of the second column values.
Execution example:
select --table Site --query title:@test --output_columns _id,_score,title --sortby -_score,_id
# [
# [
# 0,
# 1337566253.89858,
# 0.000355720520019531
# ],
# [
# [
# [
# 9
# ],
# [
# [
# "_id",
# "UInt32"
# ],
# [
# "_score",
# "Int32"
# ],
# [
# "title",
# "ShortText"
# ]
# ],
# [
# 6,
# 4,
# "test test test test record six."
# ],
# [
# 5,
# 3,
# "test test test record five."
# ],
# [
# 7,
# 3,
# "test test test record seven."
# ],
# [
# 3,
# 2,
# "test test record three."
# ],
# [
# 8,
# 2,
# "test test record eight."
# ],
# [
# 9,
# 2,
# "test test record nine."
# ],
# [
# 1,
# 1,
# "This is test record 1!"
# ],
# [
# 2,
# 1,
# "test record 2."
# ],
# [
# 4,
# 1,
# "test record four."
# ]
# ]
# ]
# ]
footnote
| [1] | Currently, a match_columns parameter is available iff there exists an inverted index for full text search. A match_columns parameter for a regular column is not supported. |