# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Monitor
module V20180724
# 告警事件
class AlarmEvent < TencentCloud::Common::AbstractModel
# @param EventName: 事件名
# @type EventName: String
# @param Description: 展示的事件名
# @type Description: String
# @param Namespace: 告警策略类型
# @type Namespace: String
attr_accessor :EventName, :Description, :Namespace
def initialize(eventname=nil, description=nil, namespace=nil)
@EventName = eventname
@Description = description
@Namespace = namespace
end
def deserialize(params)
@EventName = params['EventName']
@Description = params['Description']
@Namespace = params['Namespace']
end
end
# 告警历史数据
class AlarmHistory < TencentCloud::Common::AbstractModel
# @param AlarmId: 告警历史Id
# @type AlarmId: String
# @param MonitorType: 监控类型
# @type MonitorType: String
# @param Namespace: 策略类型
# @type Namespace: String
# @param AlarmObject: 告警对象
# @type AlarmObject: String
# @param Content: 告警内容
# @type Content: String
# @param FirstOccurTime: 时间戳，首次出现时间
# @type FirstOccurTime: Integer
# @param LastOccurTime: 时间戳，最后出现时间
# @type LastOccurTime: Integer
# @param AlarmStatus: 告警状态，ALARM=未恢复 OK=已恢复 NO_CONF=已失效 NO_DATA=数据不足
# @type AlarmStatus: String
# @param PolicyId: 告警策略 Id
# @type PolicyId: String
# @param PolicyName: 策略名称
# @type PolicyName: String
# @param VPC: 基础产品告警的告警对象所属网络
# @type VPC: String
# @param ProjectId: 项目 Id
# @type ProjectId: Integer
# @param ProjectName: 项目名字
# @type ProjectName: String
# @param InstanceGroup: 告警对象所属实例组
# @type InstanceGroup: Array
# @param ReceiverUids: 接收人列表
# @type ReceiverUids: Array
# @param ReceiverGroups: 接收组列表
# @type ReceiverGroups: Array
# @param NoticeWays: 告警渠道列表 SMS=短信 EMAIL=邮件 CALL=电话 WECHAT=微信
# @type NoticeWays: Array
# @param OriginId: 可用于实例、实例组的绑定和解绑接口（[BindingPolicyObject](https://cloud.tencent.com/document/product/248/40421)、[UnBindingAllPolicyObject](https://cloud.tencent.com/document/product/248/40568)、[UnBindingPolicyObject](https://cloud.tencent.com/document/product/248/40567)）的策略 ID
# @type OriginId: String
# @param AlarmType: 告警类型
# @type AlarmType: String
# @param EventId: 事件Id
# @type EventId: Integer
# @param Region: 地域
# @type Region: String
# @param PolicyExists: 策略是否存在 0=不存在 1=存在
# @type PolicyExists: Integer
# @param MetricsInfo: 指标信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricsInfo: Array
# @param Dimensions: 告警实例的维度信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Dimensions: String
attr_accessor :AlarmId, :MonitorType, :Namespace, :AlarmObject, :Content, :FirstOccurTime, :LastOccurTime, :AlarmStatus, :PolicyId, :PolicyName, :VPC, :ProjectId, :ProjectName, :InstanceGroup, :ReceiverUids, :ReceiverGroups, :NoticeWays, :OriginId, :AlarmType, :EventId, :Region, :PolicyExists, :MetricsInfo, :Dimensions
def initialize(alarmid=nil, monitortype=nil, namespace=nil, alarmobject=nil, content=nil, firstoccurtime=nil, lastoccurtime=nil, alarmstatus=nil, policyid=nil, policyname=nil, vpc=nil, projectid=nil, projectname=nil, instancegroup=nil, receiveruids=nil, receivergroups=nil, noticeways=nil, originid=nil, alarmtype=nil, eventid=nil, region=nil, policyexists=nil, metricsinfo=nil, dimensions=nil)
@AlarmId = alarmid
@MonitorType = monitortype
@Namespace = namespace
@AlarmObject = alarmobject
@Content = content
@FirstOccurTime = firstoccurtime
@LastOccurTime = lastoccurtime
@AlarmStatus = alarmstatus
@PolicyId = policyid
@PolicyName = policyname
@VPC = vpc
@ProjectId = projectid
@ProjectName = projectname
@InstanceGroup = instancegroup
@ReceiverUids = receiveruids
@ReceiverGroups = receivergroups
@NoticeWays = noticeways
@OriginId = originid
@AlarmType = alarmtype
@EventId = eventid
@Region = region
@PolicyExists = policyexists
@MetricsInfo = metricsinfo
@Dimensions = dimensions
end
def deserialize(params)
@AlarmId = params['AlarmId']
@MonitorType = params['MonitorType']
@Namespace = params['Namespace']
@AlarmObject = params['AlarmObject']
@Content = params['Content']
@FirstOccurTime = params['FirstOccurTime']
@LastOccurTime = params['LastOccurTime']
@AlarmStatus = params['AlarmStatus']
@PolicyId = params['PolicyId']
@PolicyName = params['PolicyName']
@VPC = params['VPC']
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
unless params['InstanceGroup'].nil?
@InstanceGroup = []
params['InstanceGroup'].each do |i|
instancegroups_tmp = InstanceGroups.new
instancegroups_tmp.deserialize(i)
@InstanceGroup << instancegroups_tmp
end
end
@ReceiverUids = params['ReceiverUids']
@ReceiverGroups = params['ReceiverGroups']
@NoticeWays = params['NoticeWays']
@OriginId = params['OriginId']
@AlarmType = params['AlarmType']
@EventId = params['EventId']
@Region = params['Region']
@PolicyExists = params['PolicyExists']
unless params['MetricsInfo'].nil?
@MetricsInfo = []
params['MetricsInfo'].each do |i|
alarmhistorymetric_tmp = AlarmHistoryMetric.new
alarmhistorymetric_tmp.deserialize(i)
@MetricsInfo << alarmhistorymetric_tmp
end
end
@Dimensions = params['Dimensions']
end
end
# 告警历史的指标信息
class AlarmHistoryMetric < TencentCloud::Common::AbstractModel
# @param QceNamespace: 云产品监控类型查询数据使用的命名空间
# @type QceNamespace: String
# @param MetricName: 指标名
# @type MetricName: String
# @param Period: 统计周期
# @type Period: Integer
# @param Value: 触发告警的数值
# @type Value: String
# @param Description: 指标的展示名
# @type Description: String
attr_accessor :QceNamespace, :MetricName, :Period, :Value, :Description
def initialize(qcenamespace=nil, metricname=nil, period=nil, value=nil, description=nil)
@QceNamespace = qcenamespace
@MetricName = metricname
@Period = period
@Value = value
@Description = description
end
def deserialize(params)
@QceNamespace = params['QceNamespace']
@MetricName = params['MetricName']
@Period = params['Period']
@Value = params['Value']
@Description = params['Description']
end
end
# 告警通知模板详情
class AlarmNotice < TencentCloud::Common::AbstractModel
# @param Id: 告警通知模板 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Id: String
# @param Name: 告警通知模板名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param UpdatedAt: 上次修改时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdatedAt: String
# @param UpdatedBy: 上次修改人
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdatedBy: String
# @param NoticeType: 告警通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=全部通知
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NoticeType: String
# @param UserNotices: 用户通知列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UserNotices: Array
# @param URLNotices: 回调通知列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type URLNotices: Array
# @param IsPreset: 是否是系统预设通知模板 0=否 1=是
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsPreset: Integer
# @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NoticeLanguage: String
# @param PolicyIds: 告警通知模板绑定的告警策略ID列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PolicyIds: Array
attr_accessor :Id, :Name, :UpdatedAt, :UpdatedBy, :NoticeType, :UserNotices, :URLNotices, :IsPreset, :NoticeLanguage, :PolicyIds
def initialize(id=nil, name=nil, updatedat=nil, updatedby=nil, noticetype=nil, usernotices=nil, urlnotices=nil, ispreset=nil, noticelanguage=nil, policyids=nil)
@Id = id
@Name = name
@UpdatedAt = updatedat
@UpdatedBy = updatedby
@NoticeType = noticetype
@UserNotices = usernotices
@URLNotices = urlnotices
@IsPreset = ispreset
@NoticeLanguage = noticelanguage
@PolicyIds = policyids
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
@UpdatedAt = params['UpdatedAt']
@UpdatedBy = params['UpdatedBy']
@NoticeType = params['NoticeType']
unless params['UserNotices'].nil?
@UserNotices = []
params['UserNotices'].each do |i|
usernotice_tmp = UserNotice.new
usernotice_tmp.deserialize(i)
@UserNotices << usernotice_tmp
end
end
unless params['URLNotices'].nil?
@URLNotices = []
params['URLNotices'].each do |i|
urlnotice_tmp = URLNotice.new
urlnotice_tmp.deserialize(i)
@URLNotices << urlnotice_tmp
end
end
@IsPreset = params['IsPreset']
@NoticeLanguage = params['NoticeLanguage']
@PolicyIds = params['PolicyIds']
end
end
# 告警策略详情
class AlarmPolicy < TencentCloud::Common::AbstractModel
# @param PolicyId: 告警策略 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PolicyId: String
# @param PolicyName: 告警策略名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PolicyName: String
# @param Remark: 备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param MonitorType: 监控类型 MT_QCE=云产品监控
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MonitorType: String
# @param Enable: 启停状态 0=停用 1=启用
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Enable: Integer
# @param UseSum: 策略组绑定的实例数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UseSum: Integer
# @param ProjectId: 项目 Id -1=无项目 0=默认项目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectId: Integer
# @param ProjectName: 项目名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectName: String
# @param Namespace: 告警策略类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Namespace: String
# @param ConditionTemplateId: 触发条件模板 Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionTemplateId: String
# @param Condition: 指标触发条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition`
# @param EventCondition: 事件触发条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition`
# @param NoticeIds: 通知规则 id 列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NoticeIds: Array
# @param Notices: 通知规则 列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Notices: Array
# @param TriggerTasks: 触发任务列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TriggerTasks: Array
# @param ConditionsTemp: 模板策略组
# 注意：此字段可能返回 null，表示取不到有效值。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.ConditionsTemp`
# @param LastEditUin: 最后编辑的用户uin
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastEditUin: String
# @param UpdateTime: 更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: Integer
# @param InsertTime: 创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InsertTime: Integer
# @param Region: 地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: Array
# @param NamespaceShowName: namespace显示名字
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NamespaceShowName: String
# @param IsDefault: 是否默认策略，1是，0否
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsDefault: Integer
# @param CanSetDefault: 能否设置默认策略，1是，0否
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CanSetDefault: Integer
# @param InstanceGroupId: 实例分组ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroupId: Integer
# @param InstanceSum: 实例分组总实例数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceSum: Integer
# @param InstanceGroupName: 实例分组名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroupName: String
# @param RuleType: 触发条件类型 STATIC=静态阈值 DYNAMIC=动态类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleType: String
# @param OriginId: 用于实例、实例组绑定和解绑接口（BindingPolicyObject、UnBindingAllPolicyObject、UnBindingPolicyObject）的策略 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OriginId: String
# @param TagInstances: 标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagInstances: Array
# @param FilterDimensionsParam: 策略关联的过滤维度信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FilterDimensionsParam: String
attr_accessor :PolicyId, :PolicyName, :Remark, :MonitorType, :Enable, :UseSum, :ProjectId, :ProjectName, :Namespace, :ConditionTemplateId, :Condition, :EventCondition, :NoticeIds, :Notices, :TriggerTasks, :ConditionsTemp, :LastEditUin, :UpdateTime, :InsertTime, :Region, :NamespaceShowName, :IsDefault, :CanSetDefault, :InstanceGroupId, :InstanceSum, :InstanceGroupName, :RuleType, :OriginId, :TagInstances, :FilterDimensionsParam
def initialize(policyid=nil, policyname=nil, remark=nil, monitortype=nil, enable=nil, usesum=nil, projectid=nil, projectname=nil, namespace=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, noticeids=nil, notices=nil, triggertasks=nil, conditionstemp=nil, lastedituin=nil, updatetime=nil, inserttime=nil, region=nil, namespaceshowname=nil, isdefault=nil, cansetdefault=nil, instancegroupid=nil, instancesum=nil, instancegroupname=nil, ruletype=nil, originid=nil, taginstances=nil, filterdimensionsparam=nil)
@PolicyId = policyid
@PolicyName = policyname
@Remark = remark
@MonitorType = monitortype
@Enable = enable
@UseSum = usesum
@ProjectId = projectid
@ProjectName = projectname
@Namespace = namespace
@ConditionTemplateId = conditiontemplateid
@Condition = condition
@EventCondition = eventcondition
@NoticeIds = noticeids
@Notices = notices
@TriggerTasks = triggertasks
@ConditionsTemp = conditionstemp
@LastEditUin = lastedituin
@UpdateTime = updatetime
@InsertTime = inserttime
@Region = region
@NamespaceShowName = namespaceshowname
@IsDefault = isdefault
@CanSetDefault = cansetdefault
@InstanceGroupId = instancegroupid
@InstanceSum = instancesum
@InstanceGroupName = instancegroupname
@RuleType = ruletype
@OriginId = originid
@TagInstances = taginstances
@FilterDimensionsParam = filterdimensionsparam
end
def deserialize(params)
@PolicyId = params['PolicyId']
@PolicyName = params['PolicyName']
@Remark = params['Remark']
@MonitorType = params['MonitorType']
@Enable = params['Enable']
@UseSum = params['UseSum']
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
@Namespace = params['Namespace']
@ConditionTemplateId = params['ConditionTemplateId']
unless params['Condition'].nil?
@Condition = AlarmPolicyCondition.new
@Condition.deserialize(params['Condition'])
end
unless params['EventCondition'].nil?
@EventCondition = AlarmPolicyEventCondition.new
@EventCondition.deserialize(params['EventCondition'])
end
@NoticeIds = params['NoticeIds']
unless params['Notices'].nil?
@Notices = []
params['Notices'].each do |i|
alarmnotice_tmp = AlarmNotice.new
alarmnotice_tmp.deserialize(i)
@Notices << alarmnotice_tmp
end
end
unless params['TriggerTasks'].nil?
@TriggerTasks = []
params['TriggerTasks'].each do |i|
alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new
alarmpolicytriggertask_tmp.deserialize(i)
@TriggerTasks << alarmpolicytriggertask_tmp
end
end
unless params['ConditionsTemp'].nil?
@ConditionsTemp = ConditionsTemp.new
@ConditionsTemp.deserialize(params['ConditionsTemp'])
end
@LastEditUin = params['LastEditUin']
@UpdateTime = params['UpdateTime']
@InsertTime = params['InsertTime']
@Region = params['Region']
@NamespaceShowName = params['NamespaceShowName']
@IsDefault = params['IsDefault']
@CanSetDefault = params['CanSetDefault']
@InstanceGroupId = params['InstanceGroupId']
@InstanceSum = params['InstanceSum']
@InstanceGroupName = params['InstanceGroupName']
@RuleType = params['RuleType']
@OriginId = params['OriginId']
unless params['TagInstances'].nil?
@TagInstances = []
params['TagInstances'].each do |i|
taginstance_tmp = TagInstance.new
taginstance_tmp.deserialize(i)
@TagInstances << taginstance_tmp
end
end
@FilterDimensionsParam = params['FilterDimensionsParam']
end
end
# 告警策略指标触发条件
class AlarmPolicyCondition < TencentCloud::Common::AbstractModel
# @param IsUnionRule: 指标触发与或条件，0=或，1=与
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsUnionRule: Integer
# @param Rules: 告警触发条件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Rules: Array
attr_accessor :IsUnionRule, :Rules
def initialize(isunionrule=nil, rules=nil)
@IsUnionRule = isunionrule
@Rules = rules
end
def deserialize(params)
@IsUnionRule = params['IsUnionRule']
unless params['Rules'].nil?
@Rules = []
params['Rules'].each do |i|
alarmpolicyrule_tmp = AlarmPolicyRule.new
alarmpolicyrule_tmp.deserialize(i)
@Rules << alarmpolicyrule_tmp
end
end
end
end
# 告警策略事件触发条件
class AlarmPolicyEventCondition < TencentCloud::Common::AbstractModel
# @param Rules: 告警触发条件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Rules: Array
attr_accessor :Rules
def initialize(rules=nil)
@Rules = rules
end
def deserialize(params)
unless params['Rules'].nil?
@Rules = []
params['Rules'].each do |i|
alarmpolicyrule_tmp = AlarmPolicyRule.new
alarmpolicyrule_tmp.deserialize(i)
@Rules << alarmpolicyrule_tmp
end
end
end
end
# 告警策略过滤条件
class AlarmPolicyFilter < TencentCloud::Common::AbstractModel
# @param Type: 过滤条件类型 DIMENSION=使用 Dimensions 做过滤
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param Dimensions: AlarmPolicyDimension 二维数组序列化后的json字符串，一维数组之间互为或关系，一维数组内的元素互为与关系
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Dimensions: String
attr_accessor :Type, :Dimensions
def initialize(type=nil, dimensions=nil)
@Type = type
@Dimensions = dimensions
end
def deserialize(params)
@Type = params['Type']
@Dimensions = params['Dimensions']
end
end
# 告警策略触发条件
class AlarmPolicyRule < TencentCloud::Common::AbstractModel
# @param MetricName: 指标名或事件名，支持的指标可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询，支持的事件可以从 [DescribeAlarmEvents](https://cloud.tencent.com/document/product/248/51284) 查询 。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricName: String
# @param Period: 秒数 统计周期，支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Period: Integer
# @param Operator: 英文运算符
# intelligent=无阈值智能检测
# eq=等于
# ge=大于等于
# gt=大于
# le=小于等于
# lt=小于
# ne=不等于
# day_increase=天同比增长
# day_decrease=天同比下降
# day_wave=天同比波动
# week_increase=周同比增长
# week_decrease=周同比下降
# week_wave=周同比波动
# cycle_increase=环比增长
# cycle_decrease=环比下降
# cycle_wave=环比波动
# re=正则匹配
# 支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Operator: String
# @param Value: 阈值，支持的范围可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
# @param ContinuePeriod: 周期数 持续通知周期 1=持续1个周期 2=持续2个周期...，支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContinuePeriod: Integer
# @param NoticeFrequency: 秒数 告警间隔 0=不重复 300=每5分钟告警一次 600=每10分钟告警一次 900=每15分钟告警一次 1800=每30分钟告警一次 3600=每1小时告警一次 7200=每2小时告警一次 10800=每3小时告警一次 21600=每6小时告警一次 43200=每12小时告警一次 86400=每1天告警一次
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NoticeFrequency: Integer
# @param IsPowerNotice: 告警频率是否指数增长 0=否 1=是
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsPowerNotice: Integer
# @param Filter: 对于单个触发规则的过滤条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter`
# @param Description: 指标展示名，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param Unit: 单位，用于出参
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Unit: String
# @param RuleType: 触发条件类型 STATIC=静态阈值 DYNAMIC=动态阈值。创建或编辑策略时，如不填则默认为 STATIC。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleType: String
attr_accessor :MetricName, :Period, :Operator, :Value, :ContinuePeriod, :NoticeFrequency, :IsPowerNotice, :Filter, :Description, :Unit, :RuleType
def initialize(metricname=nil, period=nil, operator=nil, value=nil, continueperiod=nil, noticefrequency=nil, ispowernotice=nil, filter=nil, description=nil, unit=nil, ruletype=nil)
@MetricName = metricname
@Period = period
@Operator = operator
@Value = value
@ContinuePeriod = continueperiod
@NoticeFrequency = noticefrequency
@IsPowerNotice = ispowernotice
@Filter = filter
@Description = description
@Unit = unit
@RuleType = ruletype
end
def deserialize(params)
@MetricName = params['MetricName']
@Period = params['Period']
@Operator = params['Operator']
@Value = params['Value']
@ContinuePeriod = params['ContinuePeriod']
@NoticeFrequency = params['NoticeFrequency']
@IsPowerNotice = params['IsPowerNotice']
unless params['Filter'].nil?
@Filter = AlarmPolicyFilter.new
@Filter.deserialize(params['Filter'])
end
@Description = params['Description']
@Unit = params['Unit']
@RuleType = params['RuleType']
end
end
# 告警策略触发任务
class AlarmPolicyTriggerTask < TencentCloud::Common::AbstractModel
# @param Type: 触发任务类型 AS=弹性伸缩
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param TaskConfig: 用 json 表示配置信息 {"Key1":"Value1","Key2":"Value2"}
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TaskConfig: String
attr_accessor :Type, :TaskConfig
def initialize(type=nil, taskconfig=nil)
@Type = type
@TaskConfig = taskconfig
end
def deserialize(params)
@Type = params['Type']
@TaskConfig = params['TaskConfig']
end
end
# 策略绑定实例维度信息
class BindingPolicyObjectDimension < TencentCloud::Common::AbstractModel
# @param Region: 地域名
# @type Region: String
# @param RegionId: 地域ID
# @type RegionId: Integer
# @param Dimensions: 实例的维度信息，格式为
# {"unInstanceId":"ins-00jvv9mo"}。不同云产品的维度信息不同，详见
# [指标维度信息Dimensions列表](https://cloud.tencent.com/document/product/248/50397)
# @type Dimensions: String
# @param EventDimensions: 事件维度信息
# @type EventDimensions: String
attr_accessor :Region, :RegionId, :Dimensions, :EventDimensions
def initialize(region=nil, regionid=nil, dimensions=nil, eventdimensions=nil)
@Region = region
@RegionId = regionid
@Dimensions = dimensions
@EventDimensions = eventdimensions
end
def deserialize(params)
@Region = params['Region']
@RegionId = params['RegionId']
@Dimensions = params['Dimensions']
@EventDimensions = params['EventDimensions']
end
end
# BindingPolicyObject请求参数结构体
class BindingPolicyObjectRequest < TencentCloud::Common::AbstractModel
# @param Module: 必填。固定值"monitor"
# @type Module: String
# @param GroupId: 策略组id，例如 4739573。逐渐弃用，建议使用 PolicyId 参数
# @type GroupId: Integer
# @param PolicyId: 告警策略ID，例如“policy-gh892hg0”。PolicyId 参数与 GroupId 参数至少要填一个，否则会报参数错误，建议使用该参数。若两者同时存在则以该参数为准
# @type PolicyId: String
# @param InstanceGroupId: 实例分组ID
# @type InstanceGroupId: Integer
# @param Dimensions: 需要绑定的对象维度信息
# @type Dimensions: Array
attr_accessor :Module, :GroupId, :PolicyId, :InstanceGroupId, :Dimensions
def initialize(_module=nil, groupid=nil, policyid=nil, instancegroupid=nil, dimensions=nil)
@Module = _module
@GroupId = groupid
@PolicyId = policyid
@InstanceGroupId = instancegroupid
@Dimensions = dimensions
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
@PolicyId = params['PolicyId']
@InstanceGroupId = params['InstanceGroupId']
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
bindingpolicyobjectdimension_tmp = BindingPolicyObjectDimension.new
bindingpolicyobjectdimension_tmp.deserialize(i)
@Dimensions << bindingpolicyobjectdimension_tmp
end
end
end
end
# BindingPolicyObject返回参数结构体
class BindingPolicyObjectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# BindingPolicyTag请求参数结构体
class BindingPolicyTagRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定取值 monitor
# @type Module: String
# @param PolicyId: 策略ID
# @type PolicyId: String
# @param GroupId: 用于实例、实例组绑定和解绑接口（BindingPolicyObject、UnBindingAllPolicyObject、UnBindingPolicyObject）的策略 ID
# @type GroupId: String
# @param Tag: 策略标签
# @type Tag: :class:`Tencentcloud::Monitor.v20180724.models.PolicyTag`
# @param ServiceType: 产品类型
# @type ServiceType: String
# @param InstanceGroupId: 实例分组ID
# @type InstanceGroupId: Integer
attr_accessor :Module, :PolicyId, :GroupId, :Tag, :ServiceType, :InstanceGroupId
def initialize(_module=nil, policyid=nil, groupid=nil, tag=nil, servicetype=nil, instancegroupid=nil)
@Module = _module
@PolicyId = policyid
@GroupId = groupid
@Tag = tag
@ServiceType = servicetype
@InstanceGroupId = instancegroupid
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@GroupId = params['GroupId']
unless params['Tag'].nil?
@Tag = PolicyTag.new
@Tag.deserialize(params['Tag'])
end
@ServiceType = params['ServiceType']
@InstanceGroupId = params['InstanceGroupId']
end
end
# BindingPolicyTag返回参数结构体
class BindingPolicyTagResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 统一的命名空间信息
class CommonNamespace < TencentCloud::Common::AbstractModel
# @param Id: 命名空间标示
# @type Id: String
# @param Name: 命名空间名称
# @type Name: String
# @param Value: 命名空间值
# @type Value: String
# @param ProductName: 产品名称
# @type ProductName: String
# @param Config: 配置信息
# @type Config: String
# @param AvailableRegions: 支持地域列表
# @type AvailableRegions: Array
# @param SortId: 排序Id
# @type SortId: Integer
# @param DashboardId: Dashboard中的唯一表示
# @type DashboardId: String
attr_accessor :Id, :Name, :Value, :ProductName, :Config, :AvailableRegions, :SortId, :DashboardId
def initialize(id=nil, name=nil, value=nil, productname=nil, config=nil, availableregions=nil, sortid=nil, dashboardid=nil)
@Id = id
@Name = name
@Value = value
@ProductName = productname
@Config = config
@AvailableRegions = availableregions
@SortId = sortid
@DashboardId = dashboardid
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
@Value = params['Value']
@ProductName = params['ProductName']
@Config = params['Config']
@AvailableRegions = params['AvailableRegions']
@SortId = params['SortId']
@DashboardId = params['DashboardId']
end
end
# 告警条件
class Condition < TencentCloud::Common::AbstractModel
# @param AlarmNotifyPeriod: 告警通知频率
# @type AlarmNotifyPeriod: Integer
# @param AlarmNotifyType: 重复通知策略预定义（0 - 只告警一次， 1 - 指数告警，2 - 连接告警）
# @type AlarmNotifyType: Integer
# @param CalcType: 检测方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcType: String
# @param CalcValue: 检测值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcValue: String
# @param ContinueTime: 持续时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContinueTime: String
# @param MetricID: 指标ID
# @type MetricID: Integer
# @param MetricDisplayName: 指标展示名称（对外）
# @type MetricDisplayName: String
# @param Period: 周期
# @type Period: Integer
# @param RuleID: 规则ID
# @type RuleID: Integer
# @param Unit: 指标单位
# @type Unit: String
attr_accessor :AlarmNotifyPeriod, :AlarmNotifyType, :CalcType, :CalcValue, :ContinueTime, :MetricID, :MetricDisplayName, :Period, :RuleID, :Unit
def initialize(alarmnotifyperiod=nil, alarmnotifytype=nil, calctype=nil, calcvalue=nil, continuetime=nil, metricid=nil, metricdisplayname=nil, period=nil, ruleid=nil, unit=nil)
@AlarmNotifyPeriod = alarmnotifyperiod
@AlarmNotifyType = alarmnotifytype
@CalcType = calctype
@CalcValue = calcvalue
@ContinueTime = continuetime
@MetricID = metricid
@MetricDisplayName = metricdisplayname
@Period = period
@RuleID = ruleid
@Unit = unit
end
def deserialize(params)
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@AlarmNotifyType = params['AlarmNotifyType']
@CalcType = params['CalcType']
@CalcValue = params['CalcValue']
@ContinueTime = params['ContinueTime']
@MetricID = params['MetricID']
@MetricDisplayName = params['MetricDisplayName']
@Period = params['Period']
@RuleID = params['RuleID']
@Unit = params['Unit']
end
end
# 告警条件模版
class ConditionsTemp < TencentCloud::Common::AbstractModel
# @param TemplateName: 模版名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateName: String
# @param Condition: 指标触发条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition`
# @param EventCondition: 事件触发条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition`
attr_accessor :TemplateName, :Condition, :EventCondition
def initialize(templatename=nil, condition=nil, eventcondition=nil)
@TemplateName = templatename
@Condition = condition
@EventCondition = eventcondition
end
def deserialize(params)
@TemplateName = params['TemplateName']
unless params['Condition'].nil?
@Condition = AlarmPolicyCondition.new
@Condition.deserialize(params['Condition'])
end
unless params['EventCondition'].nil?
@EventCondition = AlarmPolicyEventCondition.new
@EventCondition.deserialize(params['EventCondition'])
end
end
end
# CreateAlarmNotice请求参数结构体
class CreateAlarmNoticeRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param Name: 通知模板名称 60字符以内
# @type Name: String
# @param NoticeType: 通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=都通知
# @type NoticeType: String
# @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文
# @type NoticeLanguage: String
# @param UserNotices: 用户通知 最多5个
# @type UserNotices: Array
# @param URLNotices: 回调通知 最多3个
# @type URLNotices: Array
attr_accessor :Module, :Name, :NoticeType, :NoticeLanguage, :UserNotices, :URLNotices
def initialize(_module=nil, name=nil, noticetype=nil, noticelanguage=nil, usernotices=nil, urlnotices=nil)
@Module = _module
@Name = name
@NoticeType = noticetype
@NoticeLanguage = noticelanguage
@UserNotices = usernotices
@URLNotices = urlnotices
end
def deserialize(params)
@Module = params['Module']
@Name = params['Name']
@NoticeType = params['NoticeType']
@NoticeLanguage = params['NoticeLanguage']
unless params['UserNotices'].nil?
@UserNotices = []
params['UserNotices'].each do |i|
usernotice_tmp = UserNotice.new
usernotice_tmp.deserialize(i)
@UserNotices << usernotice_tmp
end
end
unless params['URLNotices'].nil?
@URLNotices = []
params['URLNotices'].each do |i|
urlnotice_tmp = URLNotice.new
urlnotice_tmp.deserialize(i)
@URLNotices << urlnotice_tmp
end
end
end
end
# CreateAlarmNotice返回参数结构体
class CreateAlarmNoticeResponse < TencentCloud::Common::AbstractModel
# @param NoticeId: 告警通知模板ID
# @type NoticeId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :NoticeId, :RequestId
def initialize(noticeid=nil, requestid=nil)
@NoticeId = noticeid
@RequestId = requestid
end
def deserialize(params)
@NoticeId = params['NoticeId']
@RequestId = params['RequestId']
end
end
# CreateAlarmPolicy请求参数结构体
class CreateAlarmPolicyRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param PolicyName: 策略名称，不超过20字符
# @type PolicyName: String
# @param MonitorType: 监控类型 MT_QCE=云产品监控
# @type MonitorType: String
# @param Namespace: 告警策略类型，由 [DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 获得。对于云产品监控，取接口出参的 QceNamespacesNew.N.Id，例如 cvm_device
# @type Namespace: String
# @param Remark: 备注，不超过100字符，仅支持中英文、数字、下划线、-
# @type Remark: String
# @param Enable: 是否启用 0=停用 1=启用，可不传 默认为1
# @type Enable: Integer
# @param ProjectId: 项目 Id，对于区分项目的产品必须传入非 -1 的值。 -1=无项目 0=默认项目，如不传 默认为 -1。支持的项目 Id 可以在控制台 [账号中心-项目管理](https://console.cloud.tencent.com/project) 中查看。
# @type ProjectId: Integer
# @param ConditionTemplateId: 触发条件模板 Id，该参数与 Condition 参数二选一。如果策略绑定触发条件模板，则传该参数；否则不传该参数，而是传 Condition 参数。触发条件模板 Id 可以从 [DescribeConditionsTemplateList](https://cloud.tencent.com/document/api/248/70250) 接口获取。
# @type ConditionTemplateId: Integer
# @param Condition: 指标触发条件，支持的指标可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。
# @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition`
# @param EventCondition: 事件触发条件，支持的事件可以从 [DescribeAlarmEvents](https://cloud.tencent.com/document/product/248/51284) 查询。
# @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition`
# @param NoticeIds: 通知规则 Id 列表，由 [DescribeAlarmNotices](https://cloud.tencent.com/document/product/248/51280) 获得
# @type NoticeIds: Array
# @param TriggerTasks: 触发任务列表
# @type TriggerTasks: Array
# @param Filter: 全局过滤条件
# @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter`
# @param GroupBy: 聚合维度列表，指定按哪些维度 key 来做 group by
# @type GroupBy: Array
attr_accessor :Module, :PolicyName, :MonitorType, :Namespace, :Remark, :Enable, :ProjectId, :ConditionTemplateId, :Condition, :EventCondition, :NoticeIds, :TriggerTasks, :Filter, :GroupBy
def initialize(_module=nil, policyname=nil, monitortype=nil, namespace=nil, remark=nil, enable=nil, projectid=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, noticeids=nil, triggertasks=nil, filter=nil, groupby=nil)
@Module = _module
@PolicyName = policyname
@MonitorType = monitortype
@Namespace = namespace
@Remark = remark
@Enable = enable
@ProjectId = projectid
@ConditionTemplateId = conditiontemplateid
@Condition = condition
@EventCondition = eventcondition
@NoticeIds = noticeids
@TriggerTasks = triggertasks
@Filter = filter
@GroupBy = groupby
end
def deserialize(params)
@Module = params['Module']
@PolicyName = params['PolicyName']
@MonitorType = params['MonitorType']
@Namespace = params['Namespace']
@Remark = params['Remark']
@Enable = params['Enable']
@ProjectId = params['ProjectId']
@ConditionTemplateId = params['ConditionTemplateId']
unless params['Condition'].nil?
@Condition = AlarmPolicyCondition.new
@Condition.deserialize(params['Condition'])
end
unless params['EventCondition'].nil?
@EventCondition = AlarmPolicyEventCondition.new
@EventCondition.deserialize(params['EventCondition'])
end
@NoticeIds = params['NoticeIds']
unless params['TriggerTasks'].nil?
@TriggerTasks = []
params['TriggerTasks'].each do |i|
alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new
alarmpolicytriggertask_tmp.deserialize(i)
@TriggerTasks << alarmpolicytriggertask_tmp
end
end
unless params['Filter'].nil?
@Filter = AlarmPolicyFilter.new
@Filter.deserialize(params['Filter'])
end
@GroupBy = params['GroupBy']
end
end
# CreateAlarmPolicy返回参数结构体
class CreateAlarmPolicyResponse < TencentCloud::Common::AbstractModel
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param OriginId: 可用于实例、实例组的绑定和解绑接口（[BindingPolicyObject](https://cloud.tencent.com/document/product/248/40421)、[UnBindingAllPolicyObject](https://cloud.tencent.com/document/product/248/40568)、[UnBindingPolicyObject](https://cloud.tencent.com/document/product/248/40567)）的策略 ID
# @type OriginId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PolicyId, :OriginId, :RequestId
def initialize(policyid=nil, originid=nil, requestid=nil)
@PolicyId = policyid
@OriginId = originid
@RequestId = requestid
end
def deserialize(params)
@PolicyId = params['PolicyId']
@OriginId = params['OriginId']
@RequestId = params['RequestId']
end
end
# CreateAlertRule请求参数结构体
class CreateAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param RuleName: 规则名称
# @type RuleName: String
# @param Expr: 规则表达式
# @type Expr: String
# @param Receivers: 告警通知模板 ID 列表
# @type Receivers: Array
# @param RuleState: 规则状态码，取值如下：
# <li>2=RuleEnabled</li>
# <li>3=RuleDisabled</li>
# @type RuleState: Integer
# @param Duration: 规则报警持续时间
# @type Duration: String
# @param Labels: 标签列表
# @type Labels: Array
# @param Annotations: 注释列表。
# 告警对象和告警消息是 Prometheus Rule Annotations 的特殊字段，需要通过 annotations 来传递，对应的 Key 分别为summary/description。
# @type Annotations: Array
# @param Type: 报警策略模板分类
# @type Type: String
attr_accessor :InstanceId, :RuleName, :Expr, :Receivers, :RuleState, :Duration, :Labels, :Annotations, :Type
def initialize(instanceid=nil, rulename=nil, expr=nil, receivers=nil, rulestate=nil, duration=nil, labels=nil, annotations=nil, type=nil)
@InstanceId = instanceid
@RuleName = rulename
@Expr = expr
@Receivers = receivers
@RuleState = rulestate
@Duration = duration
@Labels = labels
@Annotations = annotations
@Type = type
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RuleName = params['RuleName']
@Expr = params['Expr']
@Receivers = params['Receivers']
@RuleState = params['RuleState']
@Duration = params['Duration']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Labels << prometheusrulekv_tmp
end
end
unless params['Annotations'].nil?
@Annotations = []
params['Annotations'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Annotations << prometheusrulekv_tmp
end
end
@Type = params['Type']
end
end
# CreateAlertRule返回参数结构体
class CreateAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param RuleId: 规则 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleId, :RequestId
def initialize(ruleid=nil, requestid=nil)
@RuleId = ruleid
@RequestId = requestid
end
def deserialize(params)
@RuleId = params['RuleId']
@RequestId = params['RequestId']
end
end
# 创建策略传入的阈值告警条件
class CreatePolicyGroupCondition < TencentCloud::Common::AbstractModel
# @param MetricId: 指标Id
# @type MetricId: Integer
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param CalcType: 比较类型，1表示大于，2表示大于等于，3表示小于，4表示小于等于，5表示相等，6表示不相等。如果指标有配置默认比较类型值可以不填。
# @type CalcType: Integer
# @param CalcValue: 比较的值，如果指标不必须CalcValue可不填
# @type CalcValue: Float
# @param CalcPeriod: 数据聚合周期(单位秒)，若指标有默认值可不填
# @type CalcPeriod: Integer
# @param ContinuePeriod: 持续几个检测周期触发规则会告警
# @type ContinuePeriod: Integer
# @param RuleId: 如果通过模版创建，需要传入模版中该指标的对应RuleId
# @type RuleId: Integer
attr_accessor :MetricId, :AlarmNotifyType, :AlarmNotifyPeriod, :CalcType, :CalcValue, :CalcPeriod, :ContinuePeriod, :RuleId
def initialize(metricid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, calctype=nil, calcvalue=nil, calcperiod=nil, continueperiod=nil, ruleid=nil)
@MetricId = metricid
@AlarmNotifyType = alarmnotifytype
@AlarmNotifyPeriod = alarmnotifyperiod
@CalcType = calctype
@CalcValue = calcvalue
@CalcPeriod = calcperiod
@ContinuePeriod = continueperiod
@RuleId = ruleid
end
def deserialize(params)
@MetricId = params['MetricId']
@AlarmNotifyType = params['AlarmNotifyType']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@CalcType = params['CalcType']
@CalcValue = params['CalcValue']
@CalcPeriod = params['CalcPeriod']
@ContinuePeriod = params['ContinuePeriod']
@RuleId = params['RuleId']
end
end
# 创建策略传入的事件告警条件
class CreatePolicyGroupEventCondition < TencentCloud::Common::AbstractModel
# @param EventId: 告警事件的Id
# @type EventId: Integer
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param RuleId: 如果通过模版创建，需要传入模版中该指标的对应RuleId
# @type RuleId: Integer
attr_accessor :EventId, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId
def initialize(eventid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil)
@EventId = eventid
@AlarmNotifyType = alarmnotifytype
@AlarmNotifyPeriod = alarmnotifyperiod
@RuleId = ruleid
end
def deserialize(params)
@EventId = params['EventId']
@AlarmNotifyType = params['AlarmNotifyType']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@RuleId = params['RuleId']
end
end
# CreatePolicyGroup请求参数结构体
class CreatePolicyGroupRequest < TencentCloud::Common::AbstractModel
# @param GroupName: 组策略名称
# @type GroupName: String
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param ViewName: 策略组所属视图的名称，若通过模版创建，可不传入
# @type ViewName: String
# @param ProjectId: 策略组所属项目Id，会进行鉴权操作
# @type ProjectId: Integer
# @param ConditionTempGroupId: 模版策略组Id, 通过模版创建时才需要传
# @type ConditionTempGroupId: Integer
# @param IsShielded: 是否屏蔽策略组，0表示不屏蔽，1表示屏蔽。不填默认为0
# @type IsShielded: Integer
# @param Remark: 策略组的备注信息
# @type Remark: String
# @param InsertTime: 插入时间，戳格式为Unix时间戳，不填则按后台处理时间填充
# @type InsertTime: Integer
# @param Conditions: 策略组中的阈值告警规则
# @type Conditions: Array
# @param EventConditions: 策略组中的事件告警规则
# @type EventConditions: Array
# @param BackEndCall: 是否为后端调用。当且仅当值为1时，后台拉取策略模版中的规则填充入Conditions以及EventConditions字段
# @type BackEndCall: Integer
# @param IsUnionRule: 指标告警规则的且或关系，0表示或规则(满足任意规则就告警)，1表示且规则(满足所有规则才告警)
# @type IsUnionRule: Integer
attr_accessor :GroupName, :Module, :ViewName, :ProjectId, :ConditionTempGroupId, :IsShielded, :Remark, :InsertTime, :Conditions, :EventConditions, :BackEndCall, :IsUnionRule
def initialize(groupname=nil, _module=nil, viewname=nil, projectid=nil, conditiontempgroupid=nil, isshielded=nil, remark=nil, inserttime=nil, conditions=nil, eventconditions=nil, backendcall=nil, isunionrule=nil)
@GroupName = groupname
@Module = _module
@ViewName = viewname
@ProjectId = projectid
@ConditionTempGroupId = conditiontempgroupid
@IsShielded = isshielded
@Remark = remark
@InsertTime = inserttime
@Conditions = conditions
@EventConditions = eventconditions
@BackEndCall = backendcall
@IsUnionRule = isunionrule
end
def deserialize(params)
@GroupName = params['GroupName']
@Module = params['Module']
@ViewName = params['ViewName']
@ProjectId = params['ProjectId']
@ConditionTempGroupId = params['ConditionTempGroupId']
@IsShielded = params['IsShielded']
@Remark = params['Remark']
@InsertTime = params['InsertTime']
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
createpolicygroupcondition_tmp = CreatePolicyGroupCondition.new
createpolicygroupcondition_tmp.deserialize(i)
@Conditions << createpolicygroupcondition_tmp
end
end
unless params['EventConditions'].nil?
@EventConditions = []
params['EventConditions'].each do |i|
createpolicygroupeventcondition_tmp = CreatePolicyGroupEventCondition.new
createpolicygroupeventcondition_tmp.deserialize(i)
@EventConditions << createpolicygroupeventcondition_tmp
end
end
@BackEndCall = params['BackEndCall']
@IsUnionRule = params['IsUnionRule']
end
end
# CreatePolicyGroup返回参数结构体
class CreatePolicyGroupResponse < TencentCloud::Common::AbstractModel
# @param GroupId: 创建成功的策略组Id
# @type GroupId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GroupId, :RequestId
def initialize(groupid=nil, requestid=nil)
@GroupId = groupid
@RequestId = requestid
end
def deserialize(params)
@GroupId = params['GroupId']
@RequestId = params['RequestId']
end
end
# CreateServiceDiscovery请求参数结构体
class CreateServiceDiscoveryRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param KubeClusterId: <li>类型为TKE：对应集成的腾讯云容器服务集群 ID</li>
# @type KubeClusterId: String
# @param KubeType: 用户 Kubernetes 集群类型：
# <li> 1 = 容器服务集群(TKE) </li>
# @type KubeType: Integer
# @param Type: 服务发现类型，取值如下：
# <li> 1 = ServiceMonitor</li>
# <li> 2 = PodMonitor</li>
# <li> 3 = JobMonitor</li>
# @type Type: Integer
# @param Yaml: 服务发现配置信息
# @type Yaml: String
attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml
def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil)
@InstanceId = instanceid
@KubeClusterId = kubeclusterid
@KubeType = kubetype
@Type = type
@Yaml = yaml
end
def deserialize(params)
@InstanceId = params['InstanceId']
@KubeClusterId = params['KubeClusterId']
@KubeType = params['KubeType']
@Type = params['Type']
@Yaml = params['Yaml']
end
end
# CreateServiceDiscovery返回参数结构体
class CreateServiceDiscoveryResponse < TencentCloud::Common::AbstractModel
# @param ServiceDiscovery: 创建成功之后，返回对应服务发现信息
# @type ServiceDiscovery: :class:`Tencentcloud::Monitor.v20180724.models.ServiceDiscoveryItem`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceDiscovery, :RequestId
def initialize(servicediscovery=nil, requestid=nil)
@ServiceDiscovery = servicediscovery
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceDiscovery'].nil?
@ServiceDiscovery = ServiceDiscoveryItem.new
@ServiceDiscovery.deserialize(params['ServiceDiscovery'])
end
@RequestId = params['RequestId']
end
end
# 监控数据点
class DataPoint < TencentCloud::Common::AbstractModel
# @param Dimensions: 实例对象维度组合
# @type Dimensions: Array
# @param Timestamps: 时间戳数组，表示那些时间点有数据，缺失的时间戳，没有数据点，可以理解为掉点了
# @type Timestamps: Array
# @param Values: 监控值数组，该数组和Timestamps一一对应
# @type Values: Array
attr_accessor :Dimensions, :Timestamps, :Values
def initialize(dimensions=nil, timestamps=nil, values=nil)
@Dimensions = dimensions
@Timestamps = timestamps
@Values = values
end
def deserialize(params)
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
dimension_tmp = Dimension.new
dimension_tmp.deserialize(i)
@Dimensions << dimension_tmp
end
end
@Timestamps = params['Timestamps']
@Values = params['Values']
end
end
# DeleteAlarmNotices请求参数结构体
class DeleteAlarmNoticesRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param NoticeIds: 告警通知模板id列表
# @type NoticeIds: Array
attr_accessor :Module, :NoticeIds
def initialize(_module=nil, noticeids=nil)
@Module = _module
@NoticeIds = noticeids
end
def deserialize(params)
@Module = params['Module']
@NoticeIds = params['NoticeIds']
end
end
# DeleteAlarmNotices返回参数结构体
class DeleteAlarmNoticesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAlarmPolicy请求参数结构体
class DeleteAlarmPolicyRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
# @param PolicyIds: 告警策略 ID 列表
# @type PolicyIds: Array
attr_accessor :Module, :PolicyIds
def initialize(_module=nil, policyids=nil)
@Module = _module
@PolicyIds = policyids
end
def deserialize(params)
@Module = params['Module']
@PolicyIds = params['PolicyIds']
end
end
# DeleteAlarmPolicy返回参数结构体
class DeleteAlarmPolicyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAlertRules请求参数结构体
class DeleteAlertRulesRequest < TencentCloud::Common::AbstractModel
# @param RuleIds: 规则 ID 列表
# @type RuleIds: Array
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
attr_accessor :RuleIds, :InstanceId
def initialize(ruleids=nil, instanceid=nil)
@RuleIds = ruleids
@InstanceId = instanceid
end
def deserialize(params)
@RuleIds = params['RuleIds']
@InstanceId = params['InstanceId']
end
end
# DeleteAlertRules返回参数结构体
class DeleteAlertRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeletePolicyGroup请求参数结构体
class DeletePolicyGroupRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id
# @type GroupId: Array
attr_accessor :Module, :GroupId
def initialize(_module=nil, groupid=nil)
@Module = _module
@GroupId = groupid
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
end
end
# DeletePolicyGroup返回参数结构体
class DeletePolicyGroupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteServiceDiscovery请求参数结构体
class DeleteServiceDiscoveryRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param KubeClusterId: <li>类型是 TKE，为对应的腾讯云容器服务集群 ID</li>
# @type KubeClusterId: String
# @param KubeType: 用户 Kubernetes 集群类型：
# <li> 1 = 容器服务集群(TKE) </li>
# @type KubeType: Integer
# @param Type: 服务发现类型，取值如下：
# <li> 1 = ServiceMonitor</li>
# <li> 2 = PodMonitor</li>
# <li> 3 = PodMonitor</li>
# @type Type: Integer
# @param Yaml: 服务发现配置信息
# @type Yaml: String
attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml
def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil)
@InstanceId = instanceid
@KubeClusterId = kubeclusterid
@KubeType = kubetype
@Type = type
@Yaml = yaml
end
def deserialize(params)
@InstanceId = params['InstanceId']
@KubeClusterId = params['KubeClusterId']
@KubeType = params['KubeType']
@Type = params['Type']
@Yaml = params['Yaml']
end
end
# DeleteServiceDiscovery返回参数结构体
class DeleteServiceDiscoveryResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccidentEventList接口的出参类型
class DescribeAccidentEventListAlarms < TencentCloud::Common::AbstractModel
# @param BusinessTypeDesc: 事件分类
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessTypeDesc: String
# @param AccidentTypeDesc: 事件类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AccidentTypeDesc: String
# @param BusinessID: 事件分类的ID，1表示服务问题，2表示其他订阅
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessID: Integer
# @param EventStatus: 事件状态的ID，0表示已恢复，1表示未恢复
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventStatus: Integer
# @param AffectResource: 影响的对象
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AffectResource: String
# @param Region: 事件的地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param OccurTime: 事件发生的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OccurTime: String
# @param UpdateTime: 更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
attr_accessor :BusinessTypeDesc, :AccidentTypeDesc, :BusinessID, :EventStatus, :AffectResource, :Region, :OccurTime, :UpdateTime
def initialize(businesstypedesc=nil, accidenttypedesc=nil, businessid=nil, eventstatus=nil, affectresource=nil, region=nil, occurtime=nil, updatetime=nil)
@BusinessTypeDesc = businesstypedesc
@AccidentTypeDesc = accidenttypedesc
@BusinessID = businessid
@EventStatus = eventstatus
@AffectResource = affectresource
@Region = region
@OccurTime = occurtime
@UpdateTime = updatetime
end
def deserialize(params)
@BusinessTypeDesc = params['BusinessTypeDesc']
@AccidentTypeDesc = params['AccidentTypeDesc']
@BusinessID = params['BusinessID']
@EventStatus = params['EventStatus']
@AffectResource = params['AffectResource']
@Region = params['Region']
@OccurTime = params['OccurTime']
@UpdateTime = params['UpdateTime']
end
end
# DescribeAccidentEventList请求参数结构体
class DescribeAccidentEventListRequest < TencentCloud::Common::AbstractModel
# @param Module: 接口模块名，当前接口取值monitor
# @type Module: String
# @param StartTime: 起始时间，默认一天前的时间戳
# @type StartTime: Integer
# @param EndTime: 结束时间，默认当前时间戳
# @type EndTime: Integer
# @param Limit: 分页参数，每页返回的数量，取值1~100，默认20
# @type Limit: Integer
# @param Offset: 分页参数，页偏移量，从0开始计数，默认0
# @type Offset: Integer
# @param UpdateTimeOrder: 根据UpdateTime排序的规则，取值asc或desc
# @type UpdateTimeOrder: String
# @param OccurTimeOrder: 根据OccurTime排序的规则，取值asc或desc（优先根据UpdateTimeOrder排序）
# @type OccurTimeOrder: String
# @param AccidentType: 根据事件类型过滤，1表示服务问题，2表示其他订阅
# @type AccidentType: Array
# @param AccidentEvent: 根据事件过滤，1表示云服务器存储问题，2表示云服务器网络连接问题，3表示云服务器运行异常，202表示运营商网络抖动
# @type AccidentEvent: Array
# @param AccidentStatus: 根据事件状态过滤，0表示已恢复，1表示未恢复
# @type AccidentStatus: Array
# @param AccidentRegion: 根据事件地域过滤，gz表示广州，sh表示上海等
# @type AccidentRegion: Array
# @param AffectResource: 根据影响资源过滤，比如ins-19a06bka
# @type AffectResource: String
attr_accessor :Module, :StartTime, :EndTime, :Limit, :Offset, :UpdateTimeOrder, :OccurTimeOrder, :AccidentType, :AccidentEvent, :AccidentStatus, :AccidentRegion, :AffectResource
def initialize(_module=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, updatetimeorder=nil, occurtimeorder=nil, accidenttype=nil, accidentevent=nil, accidentstatus=nil, accidentregion=nil, affectresource=nil)
@Module = _module
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@UpdateTimeOrder = updatetimeorder
@OccurTimeOrder = occurtimeorder
@AccidentType = accidenttype
@AccidentEvent = accidentevent
@AccidentStatus = accidentstatus
@AccidentRegion = accidentregion
@AffectResource = affectresource
end
def deserialize(params)
@Module = params['Module']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@UpdateTimeOrder = params['UpdateTimeOrder']
@OccurTimeOrder = params['OccurTimeOrder']
@AccidentType = params['AccidentType']
@AccidentEvent = params['AccidentEvent']
@AccidentStatus = params['AccidentStatus']
@AccidentRegion = params['AccidentRegion']
@AffectResource = params['AffectResource']
end
end
# DescribeAccidentEventList返回参数结构体
class DescribeAccidentEventListResponse < TencentCloud::Common::AbstractModel
# @param Alarms: 平台事件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Alarms: Array
# @param Total: 平台事件的总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Alarms, :Total, :RequestId
def initialize(alarms=nil, total=nil, requestid=nil)
@Alarms = alarms
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Alarms'].nil?
@Alarms = []
params['Alarms'].each do |i|
describeaccidenteventlistalarms_tmp = DescribeAccidentEventListAlarms.new
describeaccidenteventlistalarms_tmp.deserialize(i)
@Alarms << describeaccidenteventlistalarms_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeAlarmEvents请求参数结构体
class DescribeAlarmEventsRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
# @param Namespace: 告警策略类型，由 DescribeAllNamespaces 获得，例如 cvm_device
# @type Namespace: String
# @param MonitorType: 监控类型，如 MT_QCE。如果不填默认为 MT_QCE。
# @type MonitorType: String
attr_accessor :Module, :Namespace, :MonitorType
def initialize(_module=nil, namespace=nil, monitortype=nil)
@Module = _module
@Namespace = namespace
@MonitorType = monitortype
end
def deserialize(params)
@Module = params['Module']
@Namespace = params['Namespace']
@MonitorType = params['MonitorType']
end
end
# DescribeAlarmEvents返回参数结构体
class DescribeAlarmEventsResponse < TencentCloud::Common::AbstractModel
# @param Events: 告警事件列表
# @type Events: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Events, :RequestId
def initialize(events=nil, requestid=nil)
@Events = events
@RequestId = requestid
end
def deserialize(params)
unless params['Events'].nil?
@Events = []
params['Events'].each do |i|
alarmevent_tmp = AlarmEvent.new
alarmevent_tmp.deserialize(i)
@Events << alarmevent_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmHistories请求参数结构体
class DescribeAlarmHistoriesRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param PageNumber: 页数，从 1 开始计数，默认 1
# @type PageNumber: Integer
# @param PageSize: 每页的数量，取值1~100，默认20
# @type PageSize: Integer
# @param Order: 默认按首次出现时间倒序排列 "ASC"=正序 "DESC"=逆序
# @type Order: String
# @param StartTime: 起始时间，默认一天前的时间戳。对应 `FirstOccurTime` 告警首次出现时间，告警历史的 `FirstOccurTime` 晚于 `StartTime` 才可能被搜索到。
# @type StartTime: Integer
# @param EndTime: 结束时间，默认当前时间戳。对应 `FirstOccurTime` 告警首次出现时间，告警历史的 `FirstOccurTime` 早于 `EndTime` 才可能被搜索到。
# @type EndTime: Integer
# @param MonitorTypes: 根据监控类型过滤 不选默认查所有类型 "MT_QCE"=云产品监控
# @type MonitorTypes: Array
# @param AlarmObject: 根据告警对象过滤 字符串模糊搜索
# @type AlarmObject: String
# @param AlarmStatus: 根据告警状态过滤 ALARM=未恢复 OK=已恢复 NO_CONF=已失效 NO_DATA=数据不足，不选默认查所有
# @type AlarmStatus: Array
# @param ProjectIds: 根据项目ID过滤，-1=无项目 0=默认项目
# 可在此页面查询 [项目管理](https://console.cloud.tencent.com/project)
# @type ProjectIds: Array
# @param InstanceGroupIds: 根据实例组ID过滤
# @type InstanceGroupIds: Array
# @param Namespaces: 根据策略类型过滤，策略类型是监控类型之下的概念，在这里两者都需要传入，例如 `[{"MonitorType": "MT_QCE", "Namespace": "cvm_device"}]`
# 可使用 [查询所有名字空间 DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 接口查询
# @type Namespaces: Array
# @param MetricNames: 根据指标名过滤
# @type MetricNames: Array
# @param PolicyName: 根据策略名称模糊搜索
# @type PolicyName: String
# @param Content: 根据告警内容模糊搜索
# @type Content: String
# @param ReceiverUids: 根据接收人搜索，可以使用“访问管理”的 [拉取子用户 ListUsers](https://cloud.tencent.com/document/product/598/34587) 接口获取用户列表 或 [查询子用户 GetUser](https://cloud.tencent.com/document/product/598/34590) 接口查询子用户详情，此处填入返回结果中的 `Uid` 字段
# @type ReceiverUids: Array
# @param ReceiverGroups: 根据接收组搜索，可以使用“访问管理”的 [查询用户组列表 ListGroups](https://cloud.tencent.com/document/product/598/34589) 接口获取用户组列表 或 [列出用户关联的用户组 ListGroupsForUser](https://cloud.tencent.com/document/product/598/34588) 查询某个子用户所在的用户组列表 ，此处填入返回结果中的 `GroupId ` 字段
# @type ReceiverGroups: Array
# @param PolicyIds: 根据告警策略 Id 列表搜索
# @type PolicyIds: Array
attr_accessor :Module, :PageNumber, :PageSize, :Order, :StartTime, :EndTime, :MonitorTypes, :AlarmObject, :AlarmStatus, :ProjectIds, :InstanceGroupIds, :Namespaces, :MetricNames, :PolicyName, :Content, :ReceiverUids, :ReceiverGroups, :PolicyIds
def initialize(_module=nil, pagenumber=nil, pagesize=nil, order=nil, starttime=nil, endtime=nil, monitortypes=nil, alarmobject=nil, alarmstatus=nil, projectids=nil, instancegroupids=nil, namespaces=nil, metricnames=nil, policyname=nil, content=nil, receiveruids=nil, receivergroups=nil, policyids=nil)
@Module = _module
@PageNumber = pagenumber
@PageSize = pagesize
@Order = order
@StartTime = starttime
@EndTime = endtime
@MonitorTypes = monitortypes
@AlarmObject = alarmobject
@AlarmStatus = alarmstatus
@ProjectIds = projectids
@InstanceGroupIds = instancegroupids
@Namespaces = namespaces
@MetricNames = metricnames
@PolicyName = policyname
@Content = content
@ReceiverUids = receiveruids
@ReceiverGroups = receivergroups
@PolicyIds = policyids
end
def deserialize(params)
@Module = params['Module']
@PageNumber = params['PageNumber']
@PageSize = params['PageSize']
@Order = params['Order']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@MonitorTypes = params['MonitorTypes']
@AlarmObject = params['AlarmObject']
@AlarmStatus = params['AlarmStatus']
@ProjectIds = params['ProjectIds']
@InstanceGroupIds = params['InstanceGroupIds']
unless params['Namespaces'].nil?
@Namespaces = []
params['Namespaces'].each do |i|
monitortypenamespace_tmp = MonitorTypeNamespace.new
monitortypenamespace_tmp.deserialize(i)
@Namespaces << monitortypenamespace_tmp
end
end
@MetricNames = params['MetricNames']
@PolicyName = params['PolicyName']
@Content = params['Content']
@ReceiverUids = params['ReceiverUids']
@ReceiverGroups = params['ReceiverGroups']
@PolicyIds = params['PolicyIds']
end
end
# DescribeAlarmHistories返回参数结构体
class DescribeAlarmHistoriesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 总数
# @type TotalCount: Integer
# @param Histories: 告警历史列表
# @type Histories: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Histories, :RequestId
def initialize(totalcount=nil, histories=nil, requestid=nil)
@TotalCount = totalcount
@Histories = histories
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Histories'].nil?
@Histories = []
params['Histories'].each do |i|
alarmhistory_tmp = AlarmHistory.new
alarmhistory_tmp.deserialize(i)
@Histories << alarmhistory_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmMetrics请求参数结构体
class DescribeAlarmMetricsRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param MonitorType: 监控类型过滤 "MT_QCE"=云产品监控
# @type MonitorType: String
# @param Namespace: 告警策略类型，由 DescribeAllNamespaces 获得，例如 cvm_device
# @type Namespace: String
attr_accessor :Module, :MonitorType, :Namespace
def initialize(_module=nil, monitortype=nil, namespace=nil)
@Module = _module
@MonitorType = monitortype
@Namespace = namespace
end
def deserialize(params)
@Module = params['Module']
@MonitorType = params['MonitorType']
@Namespace = params['Namespace']
end
end
# DescribeAlarmMetrics返回参数结构体
class DescribeAlarmMetricsResponse < TencentCloud::Common::AbstractModel
# @param Metrics: 告警指标列表
# @type Metrics: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Metrics, :RequestId
def initialize(metrics=nil, requestid=nil)
@Metrics = metrics
@RequestId = requestid
end
def deserialize(params)
unless params['Metrics'].nil?
@Metrics = []
params['Metrics'].each do |i|
metric_tmp = Metric.new
metric_tmp.deserialize(i)
@Metrics << metric_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmNoticeCallbacks请求参数结构体
class DescribeAlarmNoticeCallbacksRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
attr_accessor :Module
def initialize(_module=nil)
@Module = _module
end
def deserialize(params)
@Module = params['Module']
end
end
# DescribeAlarmNoticeCallbacks返回参数结构体
class DescribeAlarmNoticeCallbacksResponse < TencentCloud::Common::AbstractModel
# @param URLNotices: 告警回调通知
# 注意：此字段可能返回 null，表示取不到有效值。
# @type URLNotices: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :URLNotices, :RequestId
def initialize(urlnotices=nil, requestid=nil)
@URLNotices = urlnotices
@RequestId = requestid
end
def deserialize(params)
unless params['URLNotices'].nil?
@URLNotices = []
params['URLNotices'].each do |i|
urlnotice_tmp = URLNotice.new
urlnotice_tmp.deserialize(i)
@URLNotices << urlnotice_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmNotice请求参数结构体
class DescribeAlarmNoticeRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param NoticeId: 告警通知模板 id
# @type NoticeId: String
attr_accessor :Module, :NoticeId
def initialize(_module=nil, noticeid=nil)
@Module = _module
@NoticeId = noticeid
end
def deserialize(params)
@Module = params['Module']
@NoticeId = params['NoticeId']
end
end
# DescribeAlarmNotice返回参数结构体
class DescribeAlarmNoticeResponse < TencentCloud::Common::AbstractModel
# @param Notice: 告警通知模板详细信息
# @type Notice: :class:`Tencentcloud::Monitor.v20180724.models.AlarmNotice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Notice, :RequestId
def initialize(notice=nil, requestid=nil)
@Notice = notice
@RequestId = requestid
end
def deserialize(params)
unless params['Notice'].nil?
@Notice = AlarmNotice.new
@Notice.deserialize(params['Notice'])
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmNotices请求参数结构体
class DescribeAlarmNoticesRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param PageNumber: 页码 最小为1
# @type PageNumber: Integer
# @param PageSize: 分页大小 1～200
# @type PageSize: Integer
# @param Order: 按更新时间排序方式 ASC=正序 DESC=倒序
# @type Order: String
# @param OwnerUid: 主账号 uid 用于创建预设通知
# @type OwnerUid: Integer
# @param Name: 告警通知模板名称 用来模糊搜索
# @type Name: String
# @param ReceiverType: 根据接收人过滤告警通知模板需要选定通知用户类型 USER=用户 GROUP=用户组 传空=不按接收人过滤
# @type ReceiverType: String
# @param UserIds: 接收对象列表
# @type UserIds: Array
# @param GroupIds: 接收组列表
# @type GroupIds: Array
# @param NoticeIds: 根据通知模板 id 过滤，空数组/不传则不过滤
# @type NoticeIds: Array
attr_accessor :Module, :PageNumber, :PageSize, :Order, :OwnerUid, :Name, :ReceiverType, :UserIds, :GroupIds, :NoticeIds
def initialize(_module=nil, pagenumber=nil, pagesize=nil, order=nil, owneruid=nil, name=nil, receivertype=nil, userids=nil, groupids=nil, noticeids=nil)
@Module = _module
@PageNumber = pagenumber
@PageSize = pagesize
@Order = order
@OwnerUid = owneruid
@Name = name
@ReceiverType = receivertype
@UserIds = userids
@GroupIds = groupids
@NoticeIds = noticeids
end
def deserialize(params)
@Module = params['Module']
@PageNumber = params['PageNumber']
@PageSize = params['PageSize']
@Order = params['Order']
@OwnerUid = params['OwnerUid']
@Name = params['Name']
@ReceiverType = params['ReceiverType']
@UserIds = params['UserIds']
@GroupIds = params['GroupIds']
@NoticeIds = params['NoticeIds']
end
end
# DescribeAlarmNotices返回参数结构体
class DescribeAlarmNoticesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 告警通知模板总数
# @type TotalCount: Integer
# @param Notices: 告警通知模板列表
# @type Notices: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Notices, :RequestId
def initialize(totalcount=nil, notices=nil, requestid=nil)
@TotalCount = totalcount
@Notices = notices
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Notices'].nil?
@Notices = []
params['Notices'].each do |i|
alarmnotice_tmp = AlarmNotice.new
alarmnotice_tmp.deserialize(i)
@Notices << alarmnotice_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmPolicies请求参数结构体
class DescribeAlarmPoliciesRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param PageNumber: 页数，从 1 开始计数，默认 1
# @type PageNumber: Integer
# @param PageSize: 每页的数量，取值1~100，默认20
# @type PageSize: Integer
# @param PolicyName: 按策略名称模糊搜索
# @type PolicyName: String
# @param MonitorTypes: 根据监控类型过滤 不选默认查所有类型 "MT_QCE"=云产品监控
# @type MonitorTypes: Array
# @param Namespaces: 根据命名空间过滤，不同策略类型的值详见
# [策略类型列表](https://cloud.tencent.com/document/product/248/50397)
# @type Namespaces: Array
# @param Dimensions: 告警对象列表，JSON 字符串。外层数组，对应多个实例，内层为对象的维度。例如“云服务器-基础监控”可写为：
# `[ {"Dimensions": {"unInstanceId": "ins-qr8d555g"}}, {"Dimensions": {"unInstanceId": "ins-qr8d555h"}} ]`
# 具体也可以参考下方的示例 2。
# 不同云产品参数示例详见 [维度信息Dimensions列表](https://cloud.tencent.com/document/product/248/50397)
# 注意：如果NeedCorrespondence传入1，即需要返回策略与实例对应关系，请传入不多于20个告警对象维度，否则容易请求超时
# @type Dimensions: String
# @param ReceiverUids: 根据接收人搜索，可以使用“访问管理”的 [拉取子用户 ListUsers](https://cloud.tencent.com/document/product/598/34587) 接口获取用户列表 或 [查询子用户 GetUser](https://cloud.tencent.com/document/product/598/34590) 接口查询子用户详情，此处填入返回结果中的 `Uid` 字段
# @type ReceiverUids: Array
# @param ReceiverGroups: 根据接收组搜索，可以使用“访问管理”的 [查询用户组列表 ListGroups](https://cloud.tencent.com/document/product/598/34589) 接口获取用户组列表 或 [列出用户关联的用户组 ListGroupsForUser](https://cloud.tencent.com/document/product/598/34588) 查询某个子用户所在的用户组列表 ，此处填入返回结果中的 `GroupId ` 字段
# @type ReceiverGroups: Array
# @param PolicyType: 根据默认策略筛选 不传展示全部策略 DEFAULT=展示默认策略 NOT_DEFAULT=展示非默认策略
# @type PolicyType: Array
# @param Field: 排序字段，例如按照最后修改时间排序，Field: "UpdateTime"
# @type Field: String
# @param Order: 排序顺序：升序：ASC 降序：DESC
# @type Order: String
# @param ProjectIds: 策略所属项目的id数组，可在此页面查看
# [项目管理](https://console.cloud.tencent.com/project)
# @type ProjectIds: Array
# @param NoticeIds: 通知模版的id列表，可查询通知模版列表获取。
# 可使用 [查询通知模板列表](https://cloud.tencent.com/document/product/248/51280) 接口查询。
# @type NoticeIds: Array
# @param RuleTypes: 根据触发条件筛选 不传展示全部策略 STATIC=展示静态阈值策略 DYNAMIC=展示动态阈值策略
# @type RuleTypes: Array
# @param Enable: 告警启停筛选，[1]：启用 [0]：停止，全部[0, 1]
# @type Enable: Array
# @param NotBindingNoticeRule: 传 1 查询未配置通知规则的告警策略；不传或传其他数值，查询所有策略。
# @type NotBindingNoticeRule: Integer
# @param InstanceGroupId: 实例分组id
# @type InstanceGroupId: Integer
# @param NeedCorrespondence: 是否需要策略与入参过滤维度参数的对应关系，1：是 0：否，默认为0
# @type NeedCorrespondence: Integer
attr_accessor :Module, :PageNumber, :PageSize, :PolicyName, :MonitorTypes, :Namespaces, :Dimensions, :ReceiverUids, :ReceiverGroups, :PolicyType, :Field, :Order, :ProjectIds, :NoticeIds, :RuleTypes, :Enable, :NotBindingNoticeRule, :InstanceGroupId, :NeedCorrespondence
def initialize(_module=nil, pagenumber=nil, pagesize=nil, policyname=nil, monitortypes=nil, namespaces=nil, dimensions=nil, receiveruids=nil, receivergroups=nil, policytype=nil, field=nil, order=nil, projectids=nil, noticeids=nil, ruletypes=nil, enable=nil, notbindingnoticerule=nil, instancegroupid=nil, needcorrespondence=nil)
@Module = _module
@PageNumber = pagenumber
@PageSize = pagesize
@PolicyName = policyname
@MonitorTypes = monitortypes
@Namespaces = namespaces
@Dimensions = dimensions
@ReceiverUids = receiveruids
@ReceiverGroups = receivergroups
@PolicyType = policytype
@Field = field
@Order = order
@ProjectIds = projectids
@NoticeIds = noticeids
@RuleTypes = ruletypes
@Enable = enable
@NotBindingNoticeRule = notbindingnoticerule
@InstanceGroupId = instancegroupid
@NeedCorrespondence = needcorrespondence
end
def deserialize(params)
@Module = params['Module']
@PageNumber = params['PageNumber']
@PageSize = params['PageSize']
@PolicyName = params['PolicyName']
@MonitorTypes = params['MonitorTypes']
@Namespaces = params['Namespaces']
@Dimensions = params['Dimensions']
@ReceiverUids = params['ReceiverUids']
@ReceiverGroups = params['ReceiverGroups']
@PolicyType = params['PolicyType']
@Field = params['Field']
@Order = params['Order']
@ProjectIds = params['ProjectIds']
@NoticeIds = params['NoticeIds']
@RuleTypes = params['RuleTypes']
@Enable = params['Enable']
@NotBindingNoticeRule = params['NotBindingNoticeRule']
@InstanceGroupId = params['InstanceGroupId']
@NeedCorrespondence = params['NeedCorrespondence']
end
end
# DescribeAlarmPolicies返回参数结构体
class DescribeAlarmPoliciesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 策略总数
# @type TotalCount: Integer
# @param Policies: 策略数组
# @type Policies: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Policies, :RequestId
def initialize(totalcount=nil, policies=nil, requestid=nil)
@TotalCount = totalcount
@Policies = policies
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Policies'].nil?
@Policies = []
params['Policies'].each do |i|
alarmpolicy_tmp = AlarmPolicy.new
alarmpolicy_tmp.deserialize(i)
@Policies << alarmpolicy_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAlarmPolicy请求参数结构体
class DescribeAlarmPolicyRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param PolicyId: 告警策略ID
# @type PolicyId: String
attr_accessor :Module, :PolicyId
def initialize(_module=nil, policyid=nil)
@Module = _module
@PolicyId = policyid
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
end
end
# DescribeAlarmPolicy返回参数结构体
class DescribeAlarmPolicyResponse < TencentCloud::Common::AbstractModel
# @param Policy: 策略详情
# @type Policy: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicy`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Policy, :RequestId
def initialize(policy=nil, requestid=nil)
@Policy = policy
@RequestId = requestid
end
def deserialize(params)
unless params['Policy'].nil?
@Policy = AlarmPolicy.new
@Policy.deserialize(params['Policy'])
end
@RequestId = params['RequestId']
end
end
# DescribeAlertRules请求参数结构体
class DescribeAlertRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param Limit: 返回数量，默认为 20，最大值为 100
# @type Limit: Integer
# @param Offset: 偏移量，默认为 0
# @type Offset: Integer
# @param RuleId: 规则 ID
# @type RuleId: String
# @param RuleState: 规则状态码，取值如下：
# <li>2=RuleEnabled</li>
# <li>3=RuleDisabled</li>
# @type RuleState: Integer
# @param RuleName: 规则名称
# @type RuleName: String
# @param Type: 报警策略模板分类
# @type Type: String
attr_accessor :InstanceId, :Limit, :Offset, :RuleId, :RuleState, :RuleName, :Type
def initialize(instanceid=nil, limit=nil, offset=nil, ruleid=nil, rulestate=nil, rulename=nil, type=nil)
@InstanceId = instanceid
@Limit = limit
@Offset = offset
@RuleId = ruleid
@RuleState = rulestate
@RuleName = rulename
@Type = type
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Limit = params['Limit']
@Offset = params['Offset']
@RuleId = params['RuleId']
@RuleState = params['RuleState']
@RuleName = params['RuleName']
@Type = params['Type']
end
end
# DescribeAlertRules返回参数结构体
class DescribeAlertRulesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 报警规则数量
# @type TotalCount: Integer
# @param AlertRuleSet: 报警规则详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlertRuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AlertRuleSet, :RequestId
def initialize(totalcount=nil, alertruleset=nil, requestid=nil)
@TotalCount = totalcount
@AlertRuleSet = alertruleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AlertRuleSet'].nil?
@AlertRuleSet = []
params['AlertRuleSet'].each do |i|
prometheusruleset_tmp = PrometheusRuleSet.new
prometheusruleset_tmp.deserialize(i)
@AlertRuleSet << prometheusruleset_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAllNamespaces请求参数结构体
class DescribeAllNamespacesRequest < TencentCloud::Common::AbstractModel
# @param SceneType: 根据使用场景过滤 目前仅有"ST_ALARM"=告警类型
# @type SceneType: String
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param MonitorTypes: 根据监控类型过滤 不填默认查所有类型 "MT_QCE"=云产品监控
# @type MonitorTypes: Array
# @param Ids: 根据namespace的Id过滤 不填默认查询所有
# @type Ids: Array
attr_accessor :SceneType, :Module, :MonitorTypes, :Ids
def initialize(scenetype=nil, _module=nil, monitortypes=nil, ids=nil)
@SceneType = scenetype
@Module = _module
@MonitorTypes = monitortypes
@Ids = ids
end
def deserialize(params)
@SceneType = params['SceneType']
@Module = params['Module']
@MonitorTypes = params['MonitorTypes']
@Ids = params['Ids']
end
end
# DescribeAllNamespaces返回参数结构体
class DescribeAllNamespacesResponse < TencentCloud::Common::AbstractModel
# @param QceNamespaces: 云产品的告警策略类型，已废弃
# @type QceNamespaces: :class:`Tencentcloud::Monitor.v20180724.models.CommonNamespace`
# @param CustomNamespaces: 其他告警策略类型，已废弃
# @type CustomNamespaces: :class:`Tencentcloud::Monitor.v20180724.models.CommonNamespace`
# @param QceNamespacesNew: 云产品的告警策略类型
# @type QceNamespacesNew: Array
# @param CustomNamespacesNew: 其他告警策略类型，暂不支持
# @type CustomNamespacesNew: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :QceNamespaces, :CustomNamespaces, :QceNamespacesNew, :CustomNamespacesNew, :RequestId
def initialize(qcenamespaces=nil, customnamespaces=nil, qcenamespacesnew=nil, customnamespacesnew=nil, requestid=nil)
@QceNamespaces = qcenamespaces
@CustomNamespaces = customnamespaces
@QceNamespacesNew = qcenamespacesnew
@CustomNamespacesNew = customnamespacesnew
@RequestId = requestid
end
def deserialize(params)
unless params['QceNamespaces'].nil?
@QceNamespaces = CommonNamespace.new
@QceNamespaces.deserialize(params['QceNamespaces'])
end
unless params['CustomNamespaces'].nil?
@CustomNamespaces = CommonNamespace.new
@CustomNamespaces.deserialize(params['CustomNamespaces'])
end
unless params['QceNamespacesNew'].nil?
@QceNamespacesNew = []
params['QceNamespacesNew'].each do |i|
commonnamespace_tmp = CommonNamespace.new
commonnamespace_tmp.deserialize(i)
@QceNamespacesNew << commonnamespace_tmp
end
end
unless params['CustomNamespacesNew'].nil?
@CustomNamespacesNew = []
params['CustomNamespacesNew'].each do |i|
commonnamespace_tmp = CommonNamespace.new
commonnamespace_tmp.deserialize(i)
@CustomNamespacesNew << commonnamespace_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBaseMetrics请求参数结构体
class DescribeBaseMetricsRequest < TencentCloud::Common::AbstractModel
# @param Namespace: 业务命名空间，各个云产品的业务命名空间不同。如需获取业务命名空间，请前往各产品监控指标文档，例如云服务器的命名空间，可参见 [云服务器监控指标](https://cloud.tencent.com/document/product/248/6843)
# @type Namespace: String
# @param MetricName: 指标名，各个云产品的指标名不同。如需获取指标名，请前往各产品监控指标文档，例如云服务器的指标名，可参见 [云服务器监控指标](https://cloud.tencent.com/document/product/248/6843)
# @type MetricName: String
# @param Dimensions: 可选参数，按照维度过滤
# @type Dimensions: Array
attr_accessor :Namespace, :MetricName, :Dimensions
def initialize(namespace=nil, metricname=nil, dimensions=nil)
@Namespace = namespace
@MetricName = metricname
@Dimensions = dimensions
end
def deserialize(params)
@Namespace = params['Namespace']
@MetricName = params['MetricName']
@Dimensions = params['Dimensions']
end
end
# DescribeBaseMetrics返回参数结构体
class DescribeBaseMetricsResponse < TencentCloud::Common::AbstractModel
# @param MetricSet: 查询得到的指标描述列表
# @type MetricSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :MetricSet, :RequestId
def initialize(metricset=nil, requestid=nil)
@MetricSet = metricset
@RequestId = requestid
end
def deserialize(params)
unless params['MetricSet'].nil?
@MetricSet = []
params['MetricSet'].each do |i|
metricset_tmp = MetricSet.new
metricset_tmp.deserialize(i)
@MetricSet << metricset_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBasicAlarmList返回的Alarms
class DescribeBasicAlarmListAlarms < TencentCloud::Common::AbstractModel
# @param Id: 该条告警的ID
# @type Id: Integer
# @param ProjectId: 项目ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectId: Integer
# @param ProjectName: 项目名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectName: String
# @param Status: 告警状态ID，0表示未恢复；1表示已恢复；2,3,5表示数据不足；4表示已失效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param AlarmStatus: 告警状态，ALARM表示未恢复；OK表示已恢复；NO_DATA表示数据不足；NO_CONF表示已失效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlarmStatus: String
# @param GroupId: 策略组ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupId: Integer
# @param GroupName: 策略组名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupName: String
# @param FirstOccurTime: 发生时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FirstOccurTime: String
# @param Duration: 持续时间，单位s
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Duration: Integer
# @param LastOccurTime: 结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastOccurTime: String
# @param Content: 告警内容
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Content: String
# @param ObjName: 告警对象
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ObjName: String
# @param ObjId: 告警对象ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ObjId: String
# @param ViewName: 策略类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ViewName: String
# @param Vpc: VPC，只有CVM有
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vpc: String
# @param MetricId: 指标ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricId: Integer
# @param MetricName: 指标名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricName: String
# @param AlarmType: 告警类型，0表示指标告警，2表示产品事件告警，3表示平台事件告警
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlarmType: Integer
# @param Region: 地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param Dimensions: 告警对象维度信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Dimensions: String
# @param NotifyWay: 通知方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotifyWay: Array
# @param InstanceGroup: 所属实例组信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroup: Array
attr_accessor :Id, :ProjectId, :ProjectName, :Status, :AlarmStatus, :GroupId, :GroupName, :FirstOccurTime, :Duration, :LastOccurTime, :Content, :ObjName, :ObjId, :ViewName, :Vpc, :MetricId, :MetricName, :AlarmType, :Region, :Dimensions, :NotifyWay, :InstanceGroup
def initialize(id=nil, projectid=nil, projectname=nil, status=nil, alarmstatus=nil, groupid=nil, groupname=nil, firstoccurtime=nil, duration=nil, lastoccurtime=nil, content=nil, objname=nil, objid=nil, viewname=nil, vpc=nil, metricid=nil, metricname=nil, alarmtype=nil, region=nil, dimensions=nil, notifyway=nil, instancegroup=nil)
@Id = id
@ProjectId = projectid
@ProjectName = projectname
@Status = status
@AlarmStatus = alarmstatus
@GroupId = groupid
@GroupName = groupname
@FirstOccurTime = firstoccurtime
@Duration = duration
@LastOccurTime = lastoccurtime
@Content = content
@ObjName = objname
@ObjId = objid
@ViewName = viewname
@Vpc = vpc
@MetricId = metricid
@MetricName = metricname
@AlarmType = alarmtype
@Region = region
@Dimensions = dimensions
@NotifyWay = notifyway
@InstanceGroup = instancegroup
end
def deserialize(params)
@Id = params['Id']
@ProjectId = params['ProjectId']
@ProjectName = params['ProjectName']
@Status = params['Status']
@AlarmStatus = params['AlarmStatus']
@GroupId = params['GroupId']
@GroupName = params['GroupName']
@FirstOccurTime = params['FirstOccurTime']
@Duration = params['Duration']
@LastOccurTime = params['LastOccurTime']
@Content = params['Content']
@ObjName = params['ObjName']
@ObjId = params['ObjId']
@ViewName = params['ViewName']
@Vpc = params['Vpc']
@MetricId = params['MetricId']
@MetricName = params['MetricName']
@AlarmType = params['AlarmType']
@Region = params['Region']
@Dimensions = params['Dimensions']
@NotifyWay = params['NotifyWay']
unless params['InstanceGroup'].nil?
@InstanceGroup = []
params['InstanceGroup'].each do |i|
instancegroup_tmp = InstanceGroup.new
instancegroup_tmp.deserialize(i)
@InstanceGroup << instancegroup_tmp
end
end
end
end
# DescribeBasicAlarmList请求参数结构体
class DescribeBasicAlarmListRequest < TencentCloud::Common::AbstractModel
# @param Module: 接口模块名，当前取值monitor
# @type Module: String
# @param StartTime: 起始时间，默认一天前的时间戳
# @type StartTime: Integer
# @param EndTime: 结束时间，默认当前时间戳
# @type EndTime: Integer
# @param Limit: 分页参数，每页返回的数量，取值1~100，默认20
# @type Limit: Integer
# @param Offset: 分页参数，页偏移量，从0开始计数，默认0
# @type Offset: Integer
# @param OccurTimeOrder: 根据发生时间排序，取值ASC或DESC
# @type OccurTimeOrder: String
# @param ProjectIds: 根据项目ID过滤
# @type ProjectIds: Array
# @param ViewNames: 根据策略类型过滤
# @type ViewNames: Array
# @param AlarmStatus: 根据告警状态过滤
# @type AlarmStatus: Array
# @param ObjLike: 根据告警对象过滤
# @type ObjLike: String
# @param InstanceGroupIds: 根据实例组ID过滤
# @type InstanceGroupIds: Array
# @param MetricNames: 根据指标名过滤
# @type MetricNames: Array
attr_accessor :Module, :StartTime, :EndTime, :Limit, :Offset, :OccurTimeOrder, :ProjectIds, :ViewNames, :AlarmStatus, :ObjLike, :InstanceGroupIds, :MetricNames
def initialize(_module=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, occurtimeorder=nil, projectids=nil, viewnames=nil, alarmstatus=nil, objlike=nil, instancegroupids=nil, metricnames=nil)
@Module = _module
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@OccurTimeOrder = occurtimeorder
@ProjectIds = projectids
@ViewNames = viewnames
@AlarmStatus = alarmstatus
@ObjLike = objlike
@InstanceGroupIds = instancegroupids
@MetricNames = metricnames
end
def deserialize(params)
@Module = params['Module']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@OccurTimeOrder = params['OccurTimeOrder']
@ProjectIds = params['ProjectIds']
@ViewNames = params['ViewNames']
@AlarmStatus = params['AlarmStatus']
@ObjLike = params['ObjLike']
@InstanceGroupIds = params['InstanceGroupIds']
@MetricNames = params['MetricNames']
end
end
# DescribeBasicAlarmList返回参数结构体
class DescribeBasicAlarmListResponse < TencentCloud::Common::AbstractModel
# @param Alarms: 告警列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Alarms: Array
# @param Total: 总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Alarms, :Total, :RequestId
def initialize(alarms=nil, total=nil, requestid=nil)
@Alarms = alarms
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Alarms'].nil?
@Alarms = []
params['Alarms'].each do |i|
describebasicalarmlistalarms_tmp = DescribeBasicAlarmListAlarms.new
describebasicalarmlistalarms_tmp.deserialize(i)
@Alarms << describebasicalarmlistalarms_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeBindingPolicyObjectList接口的Dimension
class DescribeBindingPolicyObjectListDimension < TencentCloud::Common::AbstractModel
# @param RegionId: 地域id
# @type RegionId: Integer
# @param Region: 地域简称
# @type Region: String
# @param Dimensions: 维度组合json字符串
# @type Dimensions: String
# @param EventDimensions: 事件维度组合json字符串
# @type EventDimensions: String
attr_accessor :RegionId, :Region, :Dimensions, :EventDimensions
def initialize(regionid=nil, region=nil, dimensions=nil, eventdimensions=nil)
@RegionId = regionid
@Region = region
@Dimensions = dimensions
@EventDimensions = eventdimensions
end
def deserialize(params)
@RegionId = params['RegionId']
@Region = params['Region']
@Dimensions = params['Dimensions']
@EventDimensions = params['EventDimensions']
end
end
# 查询策略绑定对象列表接口返回的对象实例信息
class DescribeBindingPolicyObjectListInstance < TencentCloud::Common::AbstractModel
# @param UniqueId: 对象唯一id
# @type UniqueId: String
# @param Dimensions: 表示对象实例的维度集合，jsonObj字符串
# @type Dimensions: String
# @param IsShielded: 对象是否被屏蔽，0表示未屏蔽，1表示被屏蔽
# @type IsShielded: Integer
# @param Region: 对象所在的地域
# @type Region: String
attr_accessor :UniqueId, :Dimensions, :IsShielded, :Region
def initialize(uniqueid=nil, dimensions=nil, isshielded=nil, region=nil)
@UniqueId = uniqueid
@Dimensions = dimensions
@IsShielded = isshielded
@Region = region
end
def deserialize(params)
@UniqueId = params['UniqueId']
@Dimensions = params['Dimensions']
@IsShielded = params['IsShielded']
@Region = params['Region']
end
end
# DescribeBindingPolicyObjectList返回的是实例分组信息
class DescribeBindingPolicyObjectListInstanceGroup < TencentCloud::Common::AbstractModel
# @param InstanceGroupId: 实例分组id
# @type InstanceGroupId: Integer
# @param ViewName: 告警策略类型名称
# @type ViewName: String
# @param LastEditUin: 最后编辑uin
# @type LastEditUin: String
# @param GroupName: 实例分组名称
# @type GroupName: String
# @param InstanceSum: 实例数量
# @type InstanceSum: Integer
# @param UpdateTime: 更新时间
# @type UpdateTime: Integer
# @param InsertTime: 创建时间
# @type InsertTime: Integer
# @param Regions: 实例所在的地域集合
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Regions: Array
attr_accessor :InstanceGroupId, :ViewName, :LastEditUin, :GroupName, :InstanceSum, :UpdateTime, :InsertTime, :Regions
def initialize(instancegroupid=nil, viewname=nil, lastedituin=nil, groupname=nil, instancesum=nil, updatetime=nil, inserttime=nil, regions=nil)
@InstanceGroupId = instancegroupid
@ViewName = viewname
@LastEditUin = lastedituin
@GroupName = groupname
@InstanceSum = instancesum
@UpdateTime = updatetime
@InsertTime = inserttime
@Regions = regions
end
def deserialize(params)
@InstanceGroupId = params['InstanceGroupId']
@ViewName = params['ViewName']
@LastEditUin = params['LastEditUin']
@GroupName = params['GroupName']
@InstanceSum = params['InstanceSum']
@UpdateTime = params['UpdateTime']
@InsertTime = params['InsertTime']
@Regions = params['Regions']
end
end
# DescribeBindingPolicyObjectList请求参数结构体
class DescribeBindingPolicyObjectListRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id，如果有形如 policy-xxxx 的 id，请填到 PolicyId 字段中，本字段填 0
# @type GroupId: Integer
# @param PolicyId: 告警策略id，形如 policy-xxxx，如果填入，则GroupId可以填0
# @type PolicyId: String
# @param Limit: 每次返回的数量，取值1~100，默认20
# @type Limit: Integer
# @param Offset: 偏移量，从0开始计数，默认0。举例来说，参数 Offset=0&Limit=20 返回第 0 到 19 项，Offset=20&Limit=20 返回第 20 到 39 项，以此类推
# @type Offset: Integer
# @param Dimensions: 筛选对象的维度信息
# @type Dimensions: Array
attr_accessor :Module, :GroupId, :PolicyId, :Limit, :Offset, :Dimensions
def initialize(_module=nil, groupid=nil, policyid=nil, limit=nil, offset=nil, dimensions=nil)
@Module = _module
@GroupId = groupid
@PolicyId = policyid
@Limit = limit
@Offset = offset
@Dimensions = dimensions
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
@PolicyId = params['PolicyId']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
describebindingpolicyobjectlistdimension_tmp = DescribeBindingPolicyObjectListDimension.new
describebindingpolicyobjectlistdimension_tmp.deserialize(i)
@Dimensions << describebindingpolicyobjectlistdimension_tmp
end
end
end
end
# DescribeBindingPolicyObjectList返回参数结构体
class DescribeBindingPolicyObjectListResponse < TencentCloud::Common::AbstractModel
# @param List: 绑定的对象实例列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type List: Array
# @param Total: 绑定的对象实例总数
# @type Total: Integer
# @param NoShieldedSum: 未屏蔽的对象实例数
# @type NoShieldedSum: Integer
# @param InstanceGroup: 绑定的实例分组信息，没有绑定实例分组则为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroup: :class:`Tencentcloud::Monitor.v20180724.models.DescribeBindingPolicyObjectListInstanceGroup`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :Total, :NoShieldedSum, :InstanceGroup, :RequestId
def initialize(list=nil, total=nil, noshieldedsum=nil, instancegroup=nil, requestid=nil)
@List = list
@Total = total
@NoShieldedSum = noshieldedsum
@InstanceGroup = instancegroup
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
describebindingpolicyobjectlistinstance_tmp = DescribeBindingPolicyObjectListInstance.new
describebindingpolicyobjectlistinstance_tmp.deserialize(i)
@List << describebindingpolicyobjectlistinstance_tmp
end
end
@Total = params['Total']
@NoShieldedSum = params['NoShieldedSum']
unless params['InstanceGroup'].nil?
@InstanceGroup = DescribeBindingPolicyObjectListInstanceGroup.new
@InstanceGroup.deserialize(params['InstanceGroup'])
end
@RequestId = params['RequestId']
end
end
# DescribeConditionsTemplateList请求参数结构体
class DescribeConditionsTemplateListRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param ViewName: 视图名，由 [DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 获得。对于云产品监控，取接口出参的 QceNamespacesNew.N.Id，例如 cvm_device
# @type ViewName: String
# @param GroupName: 根据触发条件模板名称过滤查询
# @type GroupName: String
# @param GroupID: 根据触发条件模板ID过滤查询
# @type GroupID: String
# @param Limit: 分页参数，每页返回的数量，取值1~100，默认20
# @type Limit: Integer
# @param Offset: 分页参数，页偏移量，从0开始计数，默认0
# @type Offset: Integer
# @param UpdateTimeOrder: 指定按更新时间的排序方式，asc=升序, desc=降序
# @type UpdateTimeOrder: String
attr_accessor :Module, :ViewName, :GroupName, :GroupID, :Limit, :Offset, :UpdateTimeOrder
def initialize(_module=nil, viewname=nil, groupname=nil, groupid=nil, limit=nil, offset=nil, updatetimeorder=nil)
@Module = _module
@ViewName = viewname
@GroupName = groupname
@GroupID = groupid
@Limit = limit
@Offset = offset
@UpdateTimeOrder = updatetimeorder
end
def deserialize(params)
@Module = params['Module']
@ViewName = params['ViewName']
@GroupName = params['GroupName']
@GroupID = params['GroupID']
@Limit = params['Limit']
@Offset = params['Offset']
@UpdateTimeOrder = params['UpdateTimeOrder']
end
end
# DescribeConditionsTemplateList返回参数结构体
class DescribeConditionsTemplateListResponse < TencentCloud::Common::AbstractModel
# @param Total: 模板总数
# @type Total: Integer
# @param TemplateGroupList: 模板列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TemplateGroupList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Total, :TemplateGroupList, :RequestId
def initialize(total=nil, templategrouplist=nil, requestid=nil)
@Total = total
@TemplateGroupList = templategrouplist
@RequestId = requestid
end
def deserialize(params)
@Total = params['Total']
unless params['TemplateGroupList'].nil?
@TemplateGroupList = []
params['TemplateGroupList'].each do |i|
templategroup_tmp = TemplateGroup.new
templategroup_tmp.deserialize(i)
@TemplateGroupList << templategroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeMonitorTypes请求参数结构体
class DescribeMonitorTypesRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
attr_accessor :Module
def initialize(_module=nil)
@Module = _module
end
def deserialize(params)
@Module = params['Module']
end
end
# DescribeMonitorTypes返回参数结构体
class DescribeMonitorTypesResponse < TencentCloud::Common::AbstractModel
# @param MonitorTypes: 监控类型，云产品监控为 MT_QCE
# @type MonitorTypes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :MonitorTypes, :RequestId
def initialize(monitortypes=nil, requestid=nil)
@MonitorTypes = monitortypes
@RequestId = requestid
end
def deserialize(params)
@MonitorTypes = params['MonitorTypes']
@RequestId = params['RequestId']
end
end
# DescribePolicyConditionList策略条件
class DescribePolicyConditionListCondition < TencentCloud::Common::AbstractModel
# @param PolicyViewName: 策略视图名称
# @type PolicyViewName: String
# @param EventMetrics: 事件告警条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventMetrics: Array
# @param IsSupportMultiRegion: 是否支持多地域
# @type IsSupportMultiRegion: Boolean
# @param Metrics: 指标告警条件
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Metrics: Array
# @param Name: 策略类型名称
# @type Name: String
# @param SortId: 排序id
# @type SortId: Integer
# @param SupportDefault: 是否支持默认策略
# @type SupportDefault: Boolean
# @param SupportRegions: 支持该策略类型的地域列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SupportRegions: Array
attr_accessor :PolicyViewName, :EventMetrics, :IsSupportMultiRegion, :Metrics, :Name, :SortId, :SupportDefault, :SupportRegions
def initialize(policyviewname=nil, eventmetrics=nil, issupportmultiregion=nil, metrics=nil, name=nil, sortid=nil, supportdefault=nil, supportregions=nil)
@PolicyViewName = policyviewname
@EventMetrics = eventmetrics
@IsSupportMultiRegion = issupportmultiregion
@Metrics = metrics
@Name = name
@SortId = sortid
@SupportDefault = supportdefault
@SupportRegions = supportregions
end
def deserialize(params)
@PolicyViewName = params['PolicyViewName']
unless params['EventMetrics'].nil?
@EventMetrics = []
params['EventMetrics'].each do |i|
describepolicyconditionlisteventmetric_tmp = DescribePolicyConditionListEventMetric.new
describepolicyconditionlisteventmetric_tmp.deserialize(i)
@EventMetrics << describepolicyconditionlisteventmetric_tmp
end
end
@IsSupportMultiRegion = params['IsSupportMultiRegion']
unless params['Metrics'].nil?
@Metrics = []
params['Metrics'].each do |i|
describepolicyconditionlistmetric_tmp = DescribePolicyConditionListMetric.new
describepolicyconditionlistmetric_tmp.deserialize(i)
@Metrics << describepolicyconditionlistmetric_tmp
end
end
@Name = params['Name']
@SortId = params['SortId']
@SupportDefault = params['SupportDefault']
@SupportRegions = params['SupportRegions']
end
end
# DescribePolicyConditionList.ConfigManual
class DescribePolicyConditionListConfigManual < TencentCloud::Common::AbstractModel
# @param CalcType: 检测方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcType: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualCalcType`
# @param CalcValue: 检测阈值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcValue: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualCalcValue`
# @param ContinueTime: 持续时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContinueTime: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualContinueTime`
# @param Period: 数据周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Period: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualPeriod`
# @param PeriodNum: 持续周期个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PeriodNum: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualPeriodNum`
# @param StatType: 聚合方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StatType: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualStatType`
attr_accessor :CalcType, :CalcValue, :ContinueTime, :Period, :PeriodNum, :StatType
def initialize(calctype=nil, calcvalue=nil, continuetime=nil, period=nil, periodnum=nil, stattype=nil)
@CalcType = calctype
@CalcValue = calcvalue
@ContinueTime = continuetime
@Period = period
@PeriodNum = periodnum
@StatType = stattype
end
def deserialize(params)
unless params['CalcType'].nil?
@CalcType = DescribePolicyConditionListConfigManualCalcType.new
@CalcType.deserialize(params['CalcType'])
end
unless params['CalcValue'].nil?
@CalcValue = DescribePolicyConditionListConfigManualCalcValue.new
@CalcValue.deserialize(params['CalcValue'])
end
unless params['ContinueTime'].nil?
@ContinueTime = DescribePolicyConditionListConfigManualContinueTime.new
@ContinueTime.deserialize(params['ContinueTime'])
end
unless params['Period'].nil?
@Period = DescribePolicyConditionListConfigManualPeriod.new
@Period.deserialize(params['Period'])
end
unless params['PeriodNum'].nil?
@PeriodNum = DescribePolicyConditionListConfigManualPeriodNum.new
@PeriodNum.deserialize(params['PeriodNum'])
end
unless params['StatType'].nil?
@StatType = DescribePolicyConditionListConfigManualStatType.new
@StatType.deserialize(params['StatType'])
end
end
end
# DescribePolicyConditionList.ConfigManual.CalcType
class DescribePolicyConditionListConfigManualCalcType < TencentCloud::Common::AbstractModel
# @param Keys: CalcType 取值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Keys: Array
# @param Need: 是否必须
# @type Need: Boolean
attr_accessor :Keys, :Need
def initialize(keys=nil, need=nil)
@Keys = keys
@Need = need
end
def deserialize(params)
@Keys = params['Keys']
@Need = params['Need']
end
end
# DescribePolicyConditionList.ConfigManual.CalcValue
class DescribePolicyConditionListConfigManualCalcValue < TencentCloud::Common::AbstractModel
# @param Default: 默认值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Default: String
# @param Fixed: 固定值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Fixed: String
# @param Max: 最大值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Max: String
# @param Min: 最小值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Min: String
# @param Need: 是否必须
# @type Need: Boolean
attr_accessor :Default, :Fixed, :Max, :Min, :Need
def initialize(default=nil, fixed=nil, max=nil, min=nil, need=nil)
@Default = default
@Fixed = fixed
@Max = max
@Min = min
@Need = need
end
def deserialize(params)
@Default = params['Default']
@Fixed = params['Fixed']
@Max = params['Max']
@Min = params['Min']
@Need = params['Need']
end
end
# DescribePolicyConditionList.ConfigManual.ContinueTime
class DescribePolicyConditionListConfigManualContinueTime < TencentCloud::Common::AbstractModel
# @param Default: 默认持续时间，单位：秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Default: Integer
# @param Keys: 可选持续时间，单位：秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Keys: Array
# @param Need: 是否必须
# @type Need: Boolean
attr_accessor :Default, :Keys, :Need
def initialize(default=nil, keys=nil, need=nil)
@Default = default
@Keys = keys
@Need = need
end
def deserialize(params)
@Default = params['Default']
@Keys = params['Keys']
@Need = params['Need']
end
end
# DescribePolicyConditionList.ConfigManual.Period
class DescribePolicyConditionListConfigManualPeriod < TencentCloud::Common::AbstractModel
# @param Default: 默认周期，单位：秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Default: Integer
# @param Keys: 可选周期，单位：秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Keys: Array
# @param Need: 是否必须
# @type Need: Boolean
attr_accessor :Default, :Keys, :Need
def initialize(default=nil, keys=nil, need=nil)
@Default = default
@Keys = keys
@Need = need
end
def deserialize(params)
@Default = params['Default']
@Keys = params['Keys']
@Need = params['Need']
end
end
# DescribePolicyConditionList.ConfigManual.PeriodNum
class DescribePolicyConditionListConfigManualPeriodNum < TencentCloud::Common::AbstractModel
# @param Default: 默认周期数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Default: Integer
# @param Keys: 可选周期数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Keys: Array
# @param Need: 是否必须
# @type Need: Boolean
attr_accessor :Default, :Keys, :Need
def initialize(default=nil, keys=nil, need=nil)
@Default = default
@Keys = keys
@Need = need
end
def deserialize(params)
@Default = params['Default']
@Keys = params['Keys']
@Need = params['Need']
end
end
# DescribePolicyConditionList.ConfigManual.StatType
class DescribePolicyConditionListConfigManualStatType < TencentCloud::Common::AbstractModel
# @param P5: 数据聚合方式，周期5秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P5: String
# @param P10: 数据聚合方式，周期10秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P10: String
# @param P60: 数据聚合方式，周期1分钟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P60: String
# @param P300: 数据聚合方式，周期5分钟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P300: String
# @param P600: 数据聚合方式，周期10分钟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P600: String
# @param P1800: 数据聚合方式，周期30分钟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P1800: String
# @param P3600: 数据聚合方式，周期1小时
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P3600: String
# @param P86400: 数据聚合方式，周期1天
# 注意：此字段可能返回 null，表示取不到有效值。
# @type P86400: String
attr_accessor :P5, :P10, :P60, :P300, :P600, :P1800, :P3600, :P86400
def initialize(p5=nil, p10=nil, p60=nil, p300=nil, p600=nil, p1800=nil, p3600=nil, p86400=nil)
@P5 = p5
@P10 = p10
@P60 = p60
@P300 = p300
@P600 = p600
@P1800 = p1800
@P3600 = p3600
@P86400 = p86400
end
def deserialize(params)
@P5 = params['P5']
@P10 = params['P10']
@P60 = params['P60']
@P300 = params['P300']
@P600 = params['P600']
@P1800 = params['P1800']
@P3600 = params['P3600']
@P86400 = params['P86400']
end
end
# DescribePolicyConditionList.EventMetric
class DescribePolicyConditionListEventMetric < TencentCloud::Common::AbstractModel
# @param EventId: 事件id
# @type EventId: Integer
# @param EventShowName: 事件名称
# @type EventShowName: String
# @param NeedRecovered: 是否需要恢复
# @type NeedRecovered: Boolean
# @param Type: 事件类型，预留字段，当前固定取值为2
# @type Type: Integer
attr_accessor :EventId, :EventShowName, :NeedRecovered, :Type
def initialize(eventid=nil, eventshowname=nil, needrecovered=nil, type=nil)
@EventId = eventid
@EventShowName = eventshowname
@NeedRecovered = needrecovered
@Type = type
end
def deserialize(params)
@EventId = params['EventId']
@EventShowName = params['EventShowName']
@NeedRecovered = params['NeedRecovered']
@Type = params['Type']
end
end
# 指标告警配置
class DescribePolicyConditionListMetric < TencentCloud::Common::AbstractModel
# @param ConfigManual: 指标配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConfigManual: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManual`
# @param MetricId: 指标id
# @type MetricId: Integer
# @param MetricShowName: 指标名称
# @type MetricShowName: String
# @param MetricUnit: 指标单位
# @type MetricUnit: String
attr_accessor :ConfigManual, :MetricId, :MetricShowName, :MetricUnit
def initialize(configmanual=nil, metricid=nil, metricshowname=nil, metricunit=nil)
@ConfigManual = configmanual
@MetricId = metricid
@MetricShowName = metricshowname
@MetricUnit = metricunit
end
def deserialize(params)
unless params['ConfigManual'].nil?
@ConfigManual = DescribePolicyConditionListConfigManual.new
@ConfigManual.deserialize(params['ConfigManual'])
end
@MetricId = params['MetricId']
@MetricShowName = params['MetricShowName']
@MetricUnit = params['MetricUnit']
end
end
# DescribePolicyConditionList请求参数结构体
class DescribePolicyConditionListRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
attr_accessor :Module
def initialize(_module=nil)
@Module = _module
end
def deserialize(params)
@Module = params['Module']
end
end
# DescribePolicyConditionList返回参数结构体
class DescribePolicyConditionListResponse < TencentCloud::Common::AbstractModel
# @param Conditions: 告警策略条件列表
# @type Conditions: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Conditions, :RequestId
def initialize(conditions=nil, requestid=nil)
@Conditions = conditions
@RequestId = requestid
end
def deserialize(params)
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
describepolicyconditionlistcondition_tmp = DescribePolicyConditionListCondition.new
describepolicyconditionlistcondition_tmp.deserialize(i)
@Conditions << describepolicyconditionlistcondition_tmp
end
end
@RequestId = params['RequestId']
end
end
# 查询策略输出的用户回调信息
class DescribePolicyGroupInfoCallback < TencentCloud::Common::AbstractModel
# @param CallbackUrl: 用户回调接口地址
# @type CallbackUrl: String
# @param ValidFlag: 用户回调接口状态，0表示未验证，1表示已验证，2表示存在url但没有通过验证
# @type ValidFlag: Integer
# @param VerifyCode: 用户回调接口验证码
# @type VerifyCode: String
attr_accessor :CallbackUrl, :ValidFlag, :VerifyCode
def initialize(callbackurl=nil, validflag=nil, verifycode=nil)
@CallbackUrl = callbackurl
@ValidFlag = validflag
@VerifyCode = verifycode
end
def deserialize(params)
@CallbackUrl = params['CallbackUrl']
@ValidFlag = params['ValidFlag']
@VerifyCode = params['VerifyCode']
end
end
# 查询策略输出的阈值告警条件
class DescribePolicyGroupInfoCondition < TencentCloud::Common::AbstractModel
# @param MetricShowName: 指标名称
# @type MetricShowName: String
# @param Period: 数据聚合周期(单位秒)
# @type Period: Integer
# @param MetricId: 指标id
# @type MetricId: Integer
# @param RuleId: 阈值规则id
# @type RuleId: Integer
# @param Unit: 指标单位
# @type Unit: String
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param CalcType: 比较类型，1表示大于，2表示大于等于，3表示小于，4表示小于等于，5表示相等，6表示不相等，7表示日同比上涨，8表示日同比下降，9表示周同比上涨，10表示周同比下降，11表示周期环比上涨，12表示周期环比下降
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcType: Integer
# @param CalcValue: 检测阈值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CalcValue: String
# @param ContinueTime: 持续多长时间触发规则会告警(单位秒)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContinueTime: Integer
# @param MetricName: 告警指标名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricName: String
attr_accessor :MetricShowName, :Period, :MetricId, :RuleId, :Unit, :AlarmNotifyType, :AlarmNotifyPeriod, :CalcType, :CalcValue, :ContinueTime, :MetricName
def initialize(metricshowname=nil, period=nil, metricid=nil, ruleid=nil, unit=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, calctype=nil, calcvalue=nil, continuetime=nil, metricname=nil)
@MetricShowName = metricshowname
@Period = period
@MetricId = metricid
@RuleId = ruleid
@Unit = unit
@AlarmNotifyType = alarmnotifytype
@AlarmNotifyPeriod = alarmnotifyperiod
@CalcType = calctype
@CalcValue = calcvalue
@ContinueTime = continuetime
@MetricName = metricname
end
def deserialize(params)
@MetricShowName = params['MetricShowName']
@Period = params['Period']
@MetricId = params['MetricId']
@RuleId = params['RuleId']
@Unit = params['Unit']
@AlarmNotifyType = params['AlarmNotifyType']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@CalcType = params['CalcType']
@CalcValue = params['CalcValue']
@ContinueTime = params['ContinueTime']
@MetricName = params['MetricName']
end
end
# 查询策略输出的模板策略组信息
class DescribePolicyGroupInfoConditionTpl < TencentCloud::Common::AbstractModel
# @param GroupId: 策略组id
# @type GroupId: Integer
# @param GroupName: 策略组名称
# @type GroupName: String
# @param ViewName: 策略类型
# @type ViewName: String
# @param Remark: 策略组说明
# @type Remark: String
# @param LastEditUin: 最后编辑的用户uin
# @type LastEditUin: String
# @param UpdateTime: 更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: Integer
# @param InsertTime: 创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InsertTime: Integer
# @param IsUnionRule: 是否且规则
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsUnionRule: Integer
attr_accessor :GroupId, :GroupName, :ViewName, :Remark, :LastEditUin, :UpdateTime, :InsertTime, :IsUnionRule
def initialize(groupid=nil, groupname=nil, viewname=nil, remark=nil, lastedituin=nil, updatetime=nil, inserttime=nil, isunionrule=nil)
@GroupId = groupid
@GroupName = groupname
@ViewName = viewname
@Remark = remark
@LastEditUin = lastedituin
@UpdateTime = updatetime
@InsertTime = inserttime
@IsUnionRule = isunionrule
end
def deserialize(params)
@GroupId = params['GroupId']
@GroupName = params['GroupName']
@ViewName = params['ViewName']
@Remark = params['Remark']
@LastEditUin = params['LastEditUin']
@UpdateTime = params['UpdateTime']
@InsertTime = params['InsertTime']
@IsUnionRule = params['IsUnionRule']
end
end
# 查询策略输出的事件告警条件
class DescribePolicyGroupInfoEventCondition < TencentCloud::Common::AbstractModel
# @param EventId: 事件id
# @type EventId: Integer
# @param RuleId: 事件告警规则id
# @type RuleId: Integer
# @param EventShowName: 事件名称
# @type EventShowName: String
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
attr_accessor :EventId, :RuleId, :EventShowName, :AlarmNotifyPeriod, :AlarmNotifyType
def initialize(eventid=nil, ruleid=nil, eventshowname=nil, alarmnotifyperiod=nil, alarmnotifytype=nil)
@EventId = eventid
@RuleId = ruleid
@EventShowName = eventshowname
@AlarmNotifyPeriod = alarmnotifyperiod
@AlarmNotifyType = alarmnotifytype
end
def deserialize(params)
@EventId = params['EventId']
@RuleId = params['RuleId']
@EventShowName = params['EventShowName']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@AlarmNotifyType = params['AlarmNotifyType']
end
end
# 查询策略输出的告警接收人信息
class DescribePolicyGroupInfoReceiverInfo < TencentCloud::Common::AbstractModel
# @param ReceiverGroupList: 告警接收组id列表
# @type ReceiverGroupList: Array
# @param ReceiverUserList: 告警接收人id列表
# @type ReceiverUserList: Array
# @param StartTime: 告警时间段开始时间。范围[0,86400)，作为unix时间戳转成北京时间后去掉日期，例如7200表示"10:0:0"
# @type StartTime: Integer
# @param EndTime: 告警时间段结束时间。含义同StartTime
# @type EndTime: Integer
# @param ReceiverType: 接收类型。“group”(接收组)或“user”(接收人)
# @type ReceiverType: String
# @param NotifyWay: 告警通知方式。可选 "SMS","SITE","EMAIL","CALL","WECHAT"
# @type NotifyWay: Array
# @param UidList: 电话告警接收者uid
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UidList: Array
# @param RoundNumber: 电话告警轮数
# @type RoundNumber: Integer
# @param RoundInterval: 电话告警每轮间隔（秒）
# @type RoundInterval: Integer
# @param PersonInterval: 电话告警对个人间隔（秒）
# @type PersonInterval: Integer
# @param NeedSendNotice: 是否需要电话告警触达提示。0不需要，1需要
# @type NeedSendNotice: Integer
# @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知)
# @type SendFor: Array
# @param RecoverNotify: 恢复通知方式。可选"SMS"
# @type RecoverNotify: Array
# @param ReceiveLanguage: 告警发送语言
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiveLanguage: String
attr_accessor :ReceiverGroupList, :ReceiverUserList, :StartTime, :EndTime, :ReceiverType, :NotifyWay, :UidList, :RoundNumber, :RoundInterval, :PersonInterval, :NeedSendNotice, :SendFor, :RecoverNotify, :ReceiveLanguage
def initialize(receivergrouplist=nil, receiveruserlist=nil, starttime=nil, endtime=nil, receivertype=nil, notifyway=nil, uidlist=nil, roundnumber=nil, roundinterval=nil, personinterval=nil, needsendnotice=nil, sendfor=nil, recovernotify=nil, receivelanguage=nil)
@ReceiverGroupList = receivergrouplist
@ReceiverUserList = receiveruserlist
@StartTime = starttime
@EndTime = endtime
@ReceiverType = receivertype
@NotifyWay = notifyway
@UidList = uidlist
@RoundNumber = roundnumber
@RoundInterval = roundinterval
@PersonInterval = personinterval
@NeedSendNotice = needsendnotice
@SendFor = sendfor
@RecoverNotify = recovernotify
@ReceiveLanguage = receivelanguage
end
def deserialize(params)
@ReceiverGroupList = params['ReceiverGroupList']
@ReceiverUserList = params['ReceiverUserList']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@ReceiverType = params['ReceiverType']
@NotifyWay = params['NotifyWay']
@UidList = params['UidList']
@RoundNumber = params['RoundNumber']
@RoundInterval = params['RoundInterval']
@PersonInterval = params['PersonInterval']
@NeedSendNotice = params['NeedSendNotice']
@SendFor = params['SendFor']
@RecoverNotify = params['RecoverNotify']
@ReceiveLanguage = params['ReceiveLanguage']
end
end
# DescribePolicyGroupInfo请求参数结构体
class DescribePolicyGroupInfoRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id
# @type GroupId: Integer
attr_accessor :Module, :GroupId
def initialize(_module=nil, groupid=nil)
@Module = _module
@GroupId = groupid
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
end
end
# DescribePolicyGroupInfo返回参数结构体
class DescribePolicyGroupInfoResponse < TencentCloud::Common::AbstractModel
# @param GroupName: 策略组名称
# @type GroupName: String
# @param ProjectId: 策略组所属的项目id
# @type ProjectId: Integer
# @param IsDefault: 是否为默认策略，0表示非默认策略，1表示默认策略
# @type IsDefault: Integer
# @param ViewName: 策略类型
# @type ViewName: String
# @param Remark: 策略说明
# @type Remark: String
# @param ShowName: 策略类型名称
# @type ShowName: String
# @param LastEditUin: 最近编辑的用户uin
# @type LastEditUin: String
# @param UpdateTime: 最近编辑时间
# @type UpdateTime: String
# @param Region: 该策略支持的地域
# @type Region: Array
# @param DimensionGroup: 策略类型的维度列表
# @type DimensionGroup: Array
# @param ConditionsConfig: 阈值规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionsConfig: Array
# @param EventConfig: 产品事件规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventConfig: Array
# @param ReceiverInfos: 用户接收人列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverInfos: Array
# @param Callback: 用户回调信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Callback: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoCallback`
# @param ConditionsTemp: 模板策略组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoConditionTpl`
# @param CanSetDefault: 是否可以设置成默认策略
# @type CanSetDefault: Boolean
# @param IsUnionRule: 是否且规则
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsUnionRule: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GroupName, :ProjectId, :IsDefault, :ViewName, :Remark, :ShowName, :LastEditUin, :UpdateTime, :Region, :DimensionGroup, :ConditionsConfig, :EventConfig, :ReceiverInfos, :Callback, :ConditionsTemp, :CanSetDefault, :IsUnionRule, :RequestId
def initialize(groupname=nil, projectid=nil, isdefault=nil, viewname=nil, remark=nil, showname=nil, lastedituin=nil, updatetime=nil, region=nil, dimensiongroup=nil, conditionsconfig=nil, eventconfig=nil, receiverinfos=nil, callback=nil, conditionstemp=nil, cansetdefault=nil, isunionrule=nil, requestid=nil)
@GroupName = groupname
@ProjectId = projectid
@IsDefault = isdefault
@ViewName = viewname
@Remark = remark
@ShowName = showname
@LastEditUin = lastedituin
@UpdateTime = updatetime
@Region = region
@DimensionGroup = dimensiongroup
@ConditionsConfig = conditionsconfig
@EventConfig = eventconfig
@ReceiverInfos = receiverinfos
@Callback = callback
@ConditionsTemp = conditionstemp
@CanSetDefault = cansetdefault
@IsUnionRule = isunionrule
@RequestId = requestid
end
def deserialize(params)
@GroupName = params['GroupName']
@ProjectId = params['ProjectId']
@IsDefault = params['IsDefault']
@ViewName = params['ViewName']
@Remark = params['Remark']
@ShowName = params['ShowName']
@LastEditUin = params['LastEditUin']
@UpdateTime = params['UpdateTime']
@Region = params['Region']
@DimensionGroup = params['DimensionGroup']
unless params['ConditionsConfig'].nil?
@ConditionsConfig = []
params['ConditionsConfig'].each do |i|
describepolicygroupinfocondition_tmp = DescribePolicyGroupInfoCondition.new
describepolicygroupinfocondition_tmp.deserialize(i)
@ConditionsConfig << describepolicygroupinfocondition_tmp
end
end
unless params['EventConfig'].nil?
@EventConfig = []
params['EventConfig'].each do |i|
describepolicygroupinfoeventcondition_tmp = DescribePolicyGroupInfoEventCondition.new
describepolicygroupinfoeventcondition_tmp.deserialize(i)
@EventConfig << describepolicygroupinfoeventcondition_tmp
end
end
unless params['ReceiverInfos'].nil?
@ReceiverInfos = []
params['ReceiverInfos'].each do |i|
describepolicygroupinforeceiverinfo_tmp = DescribePolicyGroupInfoReceiverInfo.new
describepolicygroupinforeceiverinfo_tmp.deserialize(i)
@ReceiverInfos << describepolicygroupinforeceiverinfo_tmp
end
end
unless params['Callback'].nil?
@Callback = DescribePolicyGroupInfoCallback.new
@Callback.deserialize(params['Callback'])
end
unless params['ConditionsTemp'].nil?
@ConditionsTemp = DescribePolicyGroupInfoConditionTpl.new
@ConditionsTemp.deserialize(params['ConditionsTemp'])
end
@CanSetDefault = params['CanSetDefault']
@IsUnionRule = params['IsUnionRule']
@RequestId = params['RequestId']
end
end
# DescribePolicyGroupList.Group
class DescribePolicyGroupListGroup < TencentCloud::Common::AbstractModel
# @param GroupId: 策略组id
# @type GroupId: Integer
# @param GroupName: 策略组名称
# @type GroupName: String
# @param IsOpen: 是否开启
# @type IsOpen: Boolean
# @param ViewName: 策略视图名称
# @type ViewName: String
# @param LastEditUin: 最近编辑的用户uin
# @type LastEditUin: String
# @param UpdateTime: 最后修改时间
# @type UpdateTime: Integer
# @param InsertTime: 创建时间
# @type InsertTime: Integer
# @param UseSum: 策略组绑定的实例数
# @type UseSum: Integer
# @param NoShieldedSum: 策略组绑定的未屏蔽实例数
# @type NoShieldedSum: Integer
# @param IsDefault: 是否为默认策略，0表示非默认策略，1表示默认策略
# @type IsDefault: Integer
# @param CanSetDefault: 是否可以设置成默认策略
# @type CanSetDefault: Boolean
# @param ParentGroupId: 父策略组id
# @type ParentGroupId: Integer
# @param Remark: 策略组备注
# @type Remark: String
# @param ProjectId: 策略组所属项目id
# @type ProjectId: Integer
# @param Conditions: 阈值规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Conditions: Array
# @param EventConditions: 产品事件规则列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventConditions: Array
# @param ReceiverInfos: 用户接收人列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverInfos: Array
# @param ConditionsTemp: 模板策略组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoConditionTpl`
# @param InstanceGroup: 策略组绑定的实例组信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroup: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupListGroupInstanceGroup`
# @param IsUnionRule: 且或规则标识, 0表示或规则(任意一条规则满足阈值条件就告警), 1表示且规则(所有规则都满足阈值条件才告警)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsUnionRule: Integer
attr_accessor :GroupId, :GroupName, :IsOpen, :ViewName, :LastEditUin, :UpdateTime, :InsertTime, :UseSum, :NoShieldedSum, :IsDefault, :CanSetDefault, :ParentGroupId, :Remark, :ProjectId, :Conditions, :EventConditions, :ReceiverInfos, :ConditionsTemp, :InstanceGroup, :IsUnionRule
def initialize(groupid=nil, groupname=nil, isopen=nil, viewname=nil, lastedituin=nil, updatetime=nil, inserttime=nil, usesum=nil, noshieldedsum=nil, isdefault=nil, cansetdefault=nil, parentgroupid=nil, remark=nil, projectid=nil, conditions=nil, eventconditions=nil, receiverinfos=nil, conditionstemp=nil, instancegroup=nil, isunionrule=nil)
@GroupId = groupid
@GroupName = groupname
@IsOpen = isopen
@ViewName = viewname
@LastEditUin = lastedituin
@UpdateTime = updatetime
@InsertTime = inserttime
@UseSum = usesum
@NoShieldedSum = noshieldedsum
@IsDefault = isdefault
@CanSetDefault = cansetdefault
@ParentGroupId = parentgroupid
@Remark = remark
@ProjectId = projectid
@Conditions = conditions
@EventConditions = eventconditions
@ReceiverInfos = receiverinfos
@ConditionsTemp = conditionstemp
@InstanceGroup = instancegroup
@IsUnionRule = isunionrule
end
def deserialize(params)
@GroupId = params['GroupId']
@GroupName = params['GroupName']
@IsOpen = params['IsOpen']
@ViewName = params['ViewName']
@LastEditUin = params['LastEditUin']
@UpdateTime = params['UpdateTime']
@InsertTime = params['InsertTime']
@UseSum = params['UseSum']
@NoShieldedSum = params['NoShieldedSum']
@IsDefault = params['IsDefault']
@CanSetDefault = params['CanSetDefault']
@ParentGroupId = params['ParentGroupId']
@Remark = params['Remark']
@ProjectId = params['ProjectId']
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
describepolicygroupinfocondition_tmp = DescribePolicyGroupInfoCondition.new
describepolicygroupinfocondition_tmp.deserialize(i)
@Conditions << describepolicygroupinfocondition_tmp
end
end
unless params['EventConditions'].nil?
@EventConditions = []
params['EventConditions'].each do |i|
describepolicygroupinfoeventcondition_tmp = DescribePolicyGroupInfoEventCondition.new
describepolicygroupinfoeventcondition_tmp.deserialize(i)
@EventConditions << describepolicygroupinfoeventcondition_tmp
end
end
unless params['ReceiverInfos'].nil?
@ReceiverInfos = []
params['ReceiverInfos'].each do |i|
describepolicygroupinforeceiverinfo_tmp = DescribePolicyGroupInfoReceiverInfo.new
describepolicygroupinforeceiverinfo_tmp.deserialize(i)
@ReceiverInfos << describepolicygroupinforeceiverinfo_tmp
end
end
unless params['ConditionsTemp'].nil?
@ConditionsTemp = DescribePolicyGroupInfoConditionTpl.new
@ConditionsTemp.deserialize(params['ConditionsTemp'])
end
unless params['InstanceGroup'].nil?
@InstanceGroup = DescribePolicyGroupListGroupInstanceGroup.new
@InstanceGroup.deserialize(params['InstanceGroup'])
end
@IsUnionRule = params['IsUnionRule']
end
end
# DescribePolicyGroupList接口策略组绑定的实例分组信息
class DescribePolicyGroupListGroupInstanceGroup < TencentCloud::Common::AbstractModel
# @param InstanceGroupId: 实例分组名称id
# @type InstanceGroupId: Integer
# @param ViewName: 策略类型视图名称
# @type ViewName: String
# @param LastEditUin: 最近编辑的用户uin
# @type LastEditUin: String
# @param GroupName: 实例分组名称
# @type GroupName: String
# @param InstanceSum: 实例数量
# @type InstanceSum: Integer
# @param UpdateTime: 更新时间
# @type UpdateTime: Integer
# @param InsertTime: 创建时间
# @type InsertTime: Integer
attr_accessor :InstanceGroupId, :ViewName, :LastEditUin, :GroupName, :InstanceSum, :UpdateTime, :InsertTime
def initialize(instancegroupid=nil, viewname=nil, lastedituin=nil, groupname=nil, instancesum=nil, updatetime=nil, inserttime=nil)
@InstanceGroupId = instancegroupid
@ViewName = viewname
@LastEditUin = lastedituin
@GroupName = groupname
@InstanceSum = instancesum
@UpdateTime = updatetime
@InsertTime = inserttime
end
def deserialize(params)
@InstanceGroupId = params['InstanceGroupId']
@ViewName = params['ViewName']
@LastEditUin = params['LastEditUin']
@GroupName = params['GroupName']
@InstanceSum = params['InstanceSum']
@UpdateTime = params['UpdateTime']
@InsertTime = params['InsertTime']
end
end
# DescribePolicyGroupList请求参数结构体
class DescribePolicyGroupListRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param Limit: 分页参数，每页返回的数量，取值1~100
# @type Limit: Integer
# @param Offset: 分页参数，页偏移量，从0开始计数
# @type Offset: Integer
# @param Like: 按策略名搜索
# @type Like: String
# @param InstanceGroupId: 实例分组id
# @type InstanceGroupId: Integer
# @param UpdateTimeOrder: 按更新时间排序, asc 或者 desc
# @type UpdateTimeOrder: String
# @param ProjectIds: 项目id列表
# @type ProjectIds: Array
# @param ViewNames: 告警策略类型列表
# @type ViewNames: Array
# @param FilterUnuseReceiver: 是否过滤无接收人策略组, 1表示过滤, 0表示不过滤
# @type FilterUnuseReceiver: Integer
# @param Receivers: 过滤条件, 接收组列表
# @type Receivers: Array
# @param ReceiverUserList: 过滤条件, 接收人列表
# @type ReceiverUserList: Array
# @param Dimensions: 维度组合字段(json字符串), 例如[[{"name":"unInstanceId","value":"ins-6e4b2aaa"}]]
# @type Dimensions: String
# @param ConditionTempGroupId: 模板策略组id, 多个id用逗号分隔
# @type ConditionTempGroupId: String
# @param ReceiverType: 过滤条件, 接收人或者接收组, user表示接收人, group表示接收组
# @type ReceiverType: String
# @param IsOpen: 过滤条件，告警策略是否已启动或停止
# @type IsOpen: Boolean
attr_accessor :Module, :Limit, :Offset, :Like, :InstanceGroupId, :UpdateTimeOrder, :ProjectIds, :ViewNames, :FilterUnuseReceiver, :Receivers, :ReceiverUserList, :Dimensions, :ConditionTempGroupId, :ReceiverType, :IsOpen
def initialize(_module=nil, limit=nil, offset=nil, like=nil, instancegroupid=nil, updatetimeorder=nil, projectids=nil, viewnames=nil, filterunusereceiver=nil, receivers=nil, receiveruserlist=nil, dimensions=nil, conditiontempgroupid=nil, receivertype=nil, isopen=nil)
@Module = _module
@Limit = limit
@Offset = offset
@Like = like
@InstanceGroupId = instancegroupid
@UpdateTimeOrder = updatetimeorder
@ProjectIds = projectids
@ViewNames = viewnames
@FilterUnuseReceiver = filterunusereceiver
@Receivers = receivers
@ReceiverUserList = receiveruserlist
@Dimensions = dimensions
@ConditionTempGroupId = conditiontempgroupid
@ReceiverType = receivertype
@IsOpen = isopen
end
def deserialize(params)
@Module = params['Module']
@Limit = params['Limit']
@Offset = params['Offset']
@Like = params['Like']
@InstanceGroupId = params['InstanceGroupId']
@UpdateTimeOrder = params['UpdateTimeOrder']
@ProjectIds = params['ProjectIds']
@ViewNames = params['ViewNames']
@FilterUnuseReceiver = params['FilterUnuseReceiver']
@Receivers = params['Receivers']
@ReceiverUserList = params['ReceiverUserList']
@Dimensions = params['Dimensions']
@ConditionTempGroupId = params['ConditionTempGroupId']
@ReceiverType = params['ReceiverType']
@IsOpen = params['IsOpen']
end
end
# DescribePolicyGroupList返回参数结构体
class DescribePolicyGroupListResponse < TencentCloud::Common::AbstractModel
# @param GroupList: 策略组列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupList: Array
# @param Total: 策略组总数
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GroupList, :Total, :RequestId
def initialize(grouplist=nil, total=nil, requestid=nil)
@GroupList = grouplist
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['GroupList'].nil?
@GroupList = []
params['GroupList'].each do |i|
describepolicygrouplistgroup_tmp = DescribePolicyGroupListGroup.new
describepolicygrouplistgroup_tmp.deserialize(i)
@GroupList << describepolicygrouplistgroup_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeProductEventList的入参Dimensions
class DescribeProductEventListDimensions < TencentCloud::Common::AbstractModel
# @param Name: 维度名
# @type Name: String
# @param Value: 维度值
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# DescribeProductEventList返回的Events
class DescribeProductEventListEvents < TencentCloud::Common::AbstractModel
# @param EventId: 事件ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventId: Integer
# @param EventCName: 事件中文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventCName: String
# @param EventEName: 事件英文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventEName: String
# @param EventName: 事件简称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventName: String
# @param ProductCName: 产品中文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductCName: String
# @param ProductEName: 产品英文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductEName: String
# @param ProductName: 产品简称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductName: String
# @param InstanceId: 实例ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param InstanceName: 实例名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceName: String
# @param ProjectId: 项目ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectId: String
# @param Region: 地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param Status: 状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: String
# @param SupportAlarm: 是否支持告警
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SupportAlarm: Integer
# @param Type: 事件类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param StartTime: 开始时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: Integer
# @param UpdateTime: 更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: Integer
# @param Dimensions: 实例对象信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Dimensions: Array
# @param AdditionMsg: 实例对象附加信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AdditionMsg: Array
# @param IsAlarmConfig: 是否配置告警
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsAlarmConfig: Integer
# @param GroupInfo: 策略信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupInfo: Array
# @param ViewName: 显示名称ViewName
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ViewName: String
attr_accessor :EventId, :EventCName, :EventEName, :EventName, :ProductCName, :ProductEName, :ProductName, :InstanceId, :InstanceName, :ProjectId, :Region, :Status, :SupportAlarm, :Type, :StartTime, :UpdateTime, :Dimensions, :AdditionMsg, :IsAlarmConfig, :GroupInfo, :ViewName
def initialize(eventid=nil, eventcname=nil, eventename=nil, eventname=nil, productcname=nil, productename=nil, productname=nil, instanceid=nil, instancename=nil, projectid=nil, region=nil, status=nil, supportalarm=nil, type=nil, starttime=nil, updatetime=nil, dimensions=nil, additionmsg=nil, isalarmconfig=nil, groupinfo=nil, viewname=nil)
@EventId = eventid
@EventCName = eventcname
@EventEName = eventename
@EventName = eventname
@ProductCName = productcname
@ProductEName = productename
@ProductName = productname
@InstanceId = instanceid
@InstanceName = instancename
@ProjectId = projectid
@Region = region
@Status = status
@SupportAlarm = supportalarm
@Type = type
@StartTime = starttime
@UpdateTime = updatetime
@Dimensions = dimensions
@AdditionMsg = additionmsg
@IsAlarmConfig = isalarmconfig
@GroupInfo = groupinfo
@ViewName = viewname
end
def deserialize(params)
@EventId = params['EventId']
@EventCName = params['EventCName']
@EventEName = params['EventEName']
@EventName = params['EventName']
@ProductCName = params['ProductCName']
@ProductEName = params['ProductEName']
@ProductName = params['ProductName']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@ProjectId = params['ProjectId']
@Region = params['Region']
@Status = params['Status']
@SupportAlarm = params['SupportAlarm']
@Type = params['Type']
@StartTime = params['StartTime']
@UpdateTime = params['UpdateTime']
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
describeproducteventlisteventsdimensions_tmp = DescribeProductEventListEventsDimensions.new
describeproducteventlisteventsdimensions_tmp.deserialize(i)
@Dimensions << describeproducteventlisteventsdimensions_tmp
end
end
unless params['AdditionMsg'].nil?
@AdditionMsg = []
params['AdditionMsg'].each do |i|
describeproducteventlisteventsdimensions_tmp = DescribeProductEventListEventsDimensions.new
describeproducteventlisteventsdimensions_tmp.deserialize(i)
@AdditionMsg << describeproducteventlisteventsdimensions_tmp
end
end
@IsAlarmConfig = params['IsAlarmConfig']
unless params['GroupInfo'].nil?
@GroupInfo = []
params['GroupInfo'].each do |i|
describeproducteventlisteventsgroupinfo_tmp = DescribeProductEventListEventsGroupInfo.new
describeproducteventlisteventsgroupinfo_tmp.deserialize(i)
@GroupInfo << describeproducteventlisteventsgroupinfo_tmp
end
end
@ViewName = params['ViewName']
end
end
# DescribeProductEventList返回的Events的Dimensions
class DescribeProductEventListEventsDimensions < TencentCloud::Common::AbstractModel
# @param Key: 维度名（英文）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Key: String
# @param Name: 维度名（中文）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Value: 维度值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Key, :Name, :Value
def initialize(key=nil, name=nil, value=nil)
@Key = key
@Name = name
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Name = params['Name']
@Value = params['Value']
end
end
# DescribeProductEventList返回的Events里的GroupInfo
class DescribeProductEventListEventsGroupInfo < TencentCloud::Common::AbstractModel
# @param GroupId: 策略ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupId: Integer
# @param GroupName: 策略名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupName: String
attr_accessor :GroupId, :GroupName
def initialize(groupid=nil, groupname=nil)
@GroupId = groupid
@GroupName = groupname
end
def deserialize(params)
@GroupId = params['GroupId']
@GroupName = params['GroupName']
end
end
# DescribeProductEventList返回的OverView对象
class DescribeProductEventListOverView < TencentCloud::Common::AbstractModel
# @param StatusChangeAmount: 状态变更的事件数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StatusChangeAmount: Integer
# @param UnConfigAlarmAmount: 告警状态未配置的事件数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnConfigAlarmAmount: Integer
# @param UnNormalEventAmount: 异常事件数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnNormalEventAmount: Integer
# @param UnRecoverAmount: 未恢复的事件数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnRecoverAmount: Integer
attr_accessor :StatusChangeAmount, :UnConfigAlarmAmount, :UnNormalEventAmount, :UnRecoverAmount
def initialize(statuschangeamount=nil, unconfigalarmamount=nil, unnormaleventamount=nil, unrecoveramount=nil)
@StatusChangeAmount = statuschangeamount
@UnConfigAlarmAmount = unconfigalarmamount
@UnNormalEventAmount = unnormaleventamount
@UnRecoverAmount = unrecoveramount
end
def deserialize(params)
@StatusChangeAmount = params['StatusChangeAmount']
@UnConfigAlarmAmount = params['UnConfigAlarmAmount']
@UnNormalEventAmount = params['UnNormalEventAmount']
@UnRecoverAmount = params['UnRecoverAmount']
end
end
# DescribeProductEventList请求参数结构体
class DescribeProductEventListRequest < TencentCloud::Common::AbstractModel
# @param Module: 接口模块名，固定值"monitor"
# @type Module: String
# @param ProductName: 产品类型过滤，比如"cvm"表示云服务器
# @type ProductName: Array
# @param EventName: 事件名称过滤，比如"guest_reboot"表示机器重启
# @type EventName: Array
# @param InstanceId: 影响对象，比如"ins-19708ino"
# @type InstanceId: Array
# @param Dimensions: 维度过滤，比如外网IP:10.0.0.1
# @type Dimensions: Array
# @param RegionList: 产品事件地域过滤参数，比如gz，各地域缩写可参见[地域列表](https://cloud.tencent.com/document/product/248/50863)
# @type RegionList: Array
# @param Type: 事件类型过滤，取值范围["status_change","abnormal"]，分别表示状态变更、异常事件
# @type Type: Array
# @param Status: 事件状态过滤，取值范围["recover","alarm","-"]，分别表示已恢复、未恢复、无状态
# @type Status: Array
# @param Project: 项目ID过滤
# @type Project: Array
# @param IsAlarmConfig: 告警状态配置过滤，1表示已配置，0表示未配置
# @type IsAlarmConfig: Integer
# @param TimeOrder: 按更新时间排序，ASC表示升序，DESC表示降序，默认DESC
# @type TimeOrder: String
# @param StartTime: 起始时间，默认一天前的时间戳
# @type StartTime: Integer
# @param EndTime: 结束时间，默认当前时间戳
# @type EndTime: Integer
# @param Offset: 页偏移量，默认0
# @type Offset: Integer
# @param Limit: 每页返回的数量，默认20
# @type Limit: Integer
attr_accessor :Module, :ProductName, :EventName, :InstanceId, :Dimensions, :RegionList, :Type, :Status, :Project, :IsAlarmConfig, :TimeOrder, :StartTime, :EndTime, :Offset, :Limit
def initialize(_module=nil, productname=nil, eventname=nil, instanceid=nil, dimensions=nil, regionlist=nil, type=nil, status=nil, project=nil, isalarmconfig=nil, timeorder=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@Module = _module
@ProductName = productname
@EventName = eventname
@InstanceId = instanceid
@Dimensions = dimensions
@RegionList = regionlist
@Type = type
@Status = status
@Project = project
@IsAlarmConfig = isalarmconfig
@TimeOrder = timeorder
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@Module = params['Module']
@ProductName = params['ProductName']
@EventName = params['EventName']
@InstanceId = params['InstanceId']
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
describeproducteventlistdimensions_tmp = DescribeProductEventListDimensions.new
describeproducteventlistdimensions_tmp.deserialize(i)
@Dimensions << describeproducteventlistdimensions_tmp
end
end
@RegionList = params['RegionList']
@Type = params['Type']
@Status = params['Status']
@Project = params['Project']
@IsAlarmConfig = params['IsAlarmConfig']
@TimeOrder = params['TimeOrder']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeProductEventList返回参数结构体
class DescribeProductEventListResponse < TencentCloud::Common::AbstractModel
# @param Events: 事件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Events: Array
# @param OverView: 事件统计
# @type OverView: :class:`Tencentcloud::Monitor.v20180724.models.DescribeProductEventListOverView`
# @param Total: 事件总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Events, :OverView, :Total, :RequestId
def initialize(events=nil, overview=nil, total=nil, requestid=nil)
@Events = events
@OverView = overview
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Events'].nil?
@Events = []
params['Events'].each do |i|
describeproducteventlistevents_tmp = DescribeProductEventListEvents.new
describeproducteventlistevents_tmp.deserialize(i)
@Events << describeproducteventlistevents_tmp
end
end
unless params['OverView'].nil?
@OverView = DescribeProductEventListOverView.new
@OverView.deserialize(params['OverView'])
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeProductList请求参数结构体
class DescribeProductListRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定传值monitor
# @type Module: String
# @param Order: 排序方式：DESC/ASC（区分大小写），默认值DESC
# @type Order: String
# @param Offset: 分页查询的偏移量，默认值0
# @type Offset: Integer
# @param Limit: 分页查询的每页数据量，默认值20
# @type Limit: Integer
attr_accessor :Module, :Order, :Offset, :Limit
def initialize(_module=nil, order=nil, offset=nil, limit=nil)
@Module = _module
@Order = order
@Offset = offset
@Limit = limit
end
def deserialize(params)
@Module = params['Module']
@Order = params['Order']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeProductList返回参数结构体
class DescribeProductListResponse < TencentCloud::Common::AbstractModel
# @param ProductList: 产品信息列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductList: Array
# @param TotalCount: 产品总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ProductList, :TotalCount, :RequestId
def initialize(productlist=nil, totalcount=nil, requestid=nil)
@ProductList = productlist
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ProductList'].nil?
@ProductList = []
params['ProductList'].each do |i|
productsimple_tmp = ProductSimple.new
productsimple_tmp.deserialize(i)
@ProductList << productsimple_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribePrometheusInstances请求参数结构体
class DescribePrometheusInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 按照一个或者多个实例ID查询。实例ID形如：prom-xxxxxxxx。请求的实例的上限为100。
# @type InstanceIds: Array
# @param InstanceStatus: 按照【实例状态】进行过滤。
# <ul>
# <li>1：正在创建</li>
# <li>2：运行中</li>
# <li>3：异常</li>
# <li>4：重建中</li>
# <li>5：销毁中</li>
# <li>6：已停服</li>
# <li>8：欠费停服中</li>
# <li>9：欠费已停服</li>
# </ul>
# @type InstanceStatus: Array
# @param InstanceName: 按照【实例名称】进行过滤。
# @type InstanceName: String
# @param Zones: 按照【可用区】进行过滤。可用区形如：ap-guangzhou-1。
# @type Zones: Array
# @param TagFilters: 按照【标签键值对】进行过滤。tag-key使用具体的标签键进行替换。
# @type TagFilters: Array
# @param IPv4Address: 按照【实例的IPv4地址】进行过滤。
# @type IPv4Address: Array
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param InstanceChargeType: 按照【计费类型】进行过滤。
# <li>2：包年包月</li>
# <li>3：按量</li>
# @type InstanceChargeType: Integer
attr_accessor :InstanceIds, :InstanceStatus, :InstanceName, :Zones, :TagFilters, :IPv4Address, :Limit, :Offset, :InstanceChargeType
def initialize(instanceids=nil, instancestatus=nil, instancename=nil, zones=nil, tagfilters=nil, ipv4address=nil, limit=nil, offset=nil, instancechargetype=nil)
@InstanceIds = instanceids
@InstanceStatus = instancestatus
@InstanceName = instancename
@Zones = zones
@TagFilters = tagfilters
@IPv4Address = ipv4address
@Limit = limit
@Offset = offset
@InstanceChargeType = instancechargetype
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@InstanceStatus = params['InstanceStatus']
@InstanceName = params['InstanceName']
@Zones = params['Zones']
unless params['TagFilters'].nil?
@TagFilters = []
params['TagFilters'].each do |i|
prometheustag_tmp = PrometheusTag.new
prometheustag_tmp.deserialize(i)
@TagFilters << prometheustag_tmp
end
end
@IPv4Address = params['IPv4Address']
@Limit = params['Limit']
@Offset = params['Offset']
@InstanceChargeType = params['InstanceChargeType']
end
end
# DescribePrometheusInstances返回参数结构体
class DescribePrometheusInstancesResponse < TencentCloud::Common::AbstractModel
# @param InstanceSet: 实例详细信息列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceSet: Array
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceSet, :TotalCount, :RequestId
def initialize(instanceset=nil, totalcount=nil, requestid=nil)
@InstanceSet = instanceset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
prometheusinstancesitem_tmp = PrometheusInstancesItem.new
prometheusinstancesitem_tmp.deserialize(i)
@InstanceSet << prometheusinstancesitem_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeServiceDiscovery请求参数结构体
class DescribeServiceDiscoveryRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param KubeClusterId: <li>类型是 TKE，为对应的腾讯云容器服务集群 ID</li>
# @type KubeClusterId: String
# @param KubeType: 用户 Kubernetes 集群类型：
# <li> 1 = 容器服务集群(TKE) </li>
# @type KubeType: Integer
attr_accessor :InstanceId, :KubeClusterId, :KubeType
def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil)
@InstanceId = instanceid
@KubeClusterId = kubeclusterid
@KubeType = kubetype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@KubeClusterId = params['KubeClusterId']
@KubeType = params['KubeType']
end
end
# DescribeServiceDiscovery返回参数结构体
class DescribeServiceDiscoveryResponse < TencentCloud::Common::AbstractModel
# @param ServiceDiscoverySet: 返回服务发现列表信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceDiscoverySet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceDiscoverySet, :RequestId
def initialize(servicediscoveryset=nil, requestid=nil)
@ServiceDiscoverySet = servicediscoveryset
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceDiscoverySet'].nil?
@ServiceDiscoverySet = []
params['ServiceDiscoverySet'].each do |i|
servicediscoveryitem_tmp = ServiceDiscoveryItem.new
servicediscoveryitem_tmp.deserialize(i)
@ServiceDiscoverySet << servicediscoveryitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeStatisticData请求参数结构体
class DescribeStatisticDataRequest < TencentCloud::Common::AbstractModel
# @param Module: 所属模块，固定值，为monitor
# @type Module: String
# @param Namespace: 命名空间，目前只支持QCE/TKE
# @type Namespace: String
# @param MetricNames: 指标名列表
# @type MetricNames: Array
# @param Conditions: 维度条件，操作符支持=、in
# @type Conditions: Array
# @param Period: 统计粒度。默认取值为300，单位为s
# @type Period: Integer
# @param StartTime: 起始时间，默认为当前时间，如2020-12-08T19:51:23+08:00
# @type StartTime: String
# @param EndTime: 结束时间，默认为当前时间，如2020-12-08T19:51:23+08:00
# @type EndTime: String
# @param GroupBys: 按指定维度groupBy
# @type GroupBys: Array
attr_accessor :Module, :Namespace, :MetricNames, :Conditions, :Period, :StartTime, :EndTime, :GroupBys
def initialize(_module=nil, namespace=nil, metricnames=nil, conditions=nil, period=nil, starttime=nil, endtime=nil, groupbys=nil)
@Module = _module
@Namespace = namespace
@MetricNames = metricnames
@Conditions = conditions
@Period = period
@StartTime = starttime
@EndTime = endtime
@GroupBys = groupbys
end
def deserialize(params)
@Module = params['Module']
@Namespace = params['Namespace']
@MetricNames = params['MetricNames']
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
midquerycondition_tmp = MidQueryCondition.new
midquerycondition_tmp.deserialize(i)
@Conditions << midquerycondition_tmp
end
end
@Period = params['Period']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@GroupBys = params['GroupBys']
end
end
# DescribeStatisticData返回参数结构体
class DescribeStatisticDataResponse < TencentCloud::Common::AbstractModel
# @param Period: 统计周期
# @type Period: Integer
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param Data: 监控数据
# @type Data: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Period, :StartTime, :EndTime, :Data, :RequestId
def initialize(period=nil, starttime=nil, endtime=nil, data=nil, requestid=nil)
@Period = period
@StartTime = starttime
@EndTime = endtime
@Data = data
@RequestId = requestid
end
def deserialize(params)
@Period = params['Period']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
metricdata_tmp = MetricData.new
metricdata_tmp.deserialize(i)
@Data << metricdata_tmp
end
end
@RequestId = params['RequestId']
end
end
# 实例对象的维度组合
class Dimension < TencentCloud::Common::AbstractModel
# @param Name: 实例维度名称
# @type Name: String
# @param Value: 实例维度值
# @type Value: String
attr_accessor :Name, :Value
def initialize(name=nil, value=nil)
@Name = name
@Value = value
end
def deserialize(params)
@Name = params['Name']
@Value = params['Value']
end
end
# 维度信息
class DimensionsDesc < TencentCloud::Common::AbstractModel
# @param Dimensions: 维度名数组
# @type Dimensions: Array
attr_accessor :Dimensions
def initialize(dimensions=nil)
@Dimensions = dimensions
end
def deserialize(params)
@Dimensions = params['Dimensions']
end
end
# 事件告警条件
class EventCondition < TencentCloud::Common::AbstractModel
# @param AlarmNotifyPeriod: 告警通知频率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlarmNotifyPeriod: String
# @param AlarmNotifyType: 重复通知策略预定义（0 - 只告警一次， 1 - 指数告警，2 - 连接告警）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AlarmNotifyType: String
# @param EventID: 事件ID
# @type EventID: String
# @param EventDisplayName: 事件展示名称（对外）
# @type EventDisplayName: String
# @param RuleID: 规则ID
# @type RuleID: String
attr_accessor :AlarmNotifyPeriod, :AlarmNotifyType, :EventID, :EventDisplayName, :RuleID
def initialize(alarmnotifyperiod=nil, alarmnotifytype=nil, eventid=nil, eventdisplayname=nil, ruleid=nil)
@AlarmNotifyPeriod = alarmnotifyperiod
@AlarmNotifyType = alarmnotifytype
@EventID = eventid
@EventDisplayName = eventdisplayname
@RuleID = ruleid
end
def deserialize(params)
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@AlarmNotifyType = params['AlarmNotifyType']
@EventID = params['EventID']
@EventDisplayName = params['EventDisplayName']
@RuleID = params['RuleID']
end
end
# GetMonitorData请求参数结构体
class GetMonitorDataRequest < TencentCloud::Common::AbstractModel
# @param Namespace: 命名空间，如QCE/CVM。各个云产品的详细命名空间说明请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档
# @type Namespace: String
# @param MetricName: 指标名称，如CPUUsage，仅支持单指标拉取。各个云产品的详细指标说明请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档，对应的指标英文名即为MetricName
# @type MetricName: String
# @param Instances: 实例对象的维度组合，格式为key-value键值对形式的集合。不同类型的实例字段完全不同，如CVM为[{"Name":"InstanceId","Value":"ins-j0hk02zo"}]，Ckafka为[{"Name":"instanceId","Value":"ckafka-l49k54dd"}]，COS为[{"Name":"appid","Value":"1258344699"},{"Name":"bucket","Value":"rig-1258344699"}]。各个云产品的维度请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档，对应的维度列即为维度组合的key，value为key对应的值。单请求最多支持批量拉取10个实例的监控数据。
# @type Instances: Array
# @param Period: 监控统计周期，如60。默认为取值为300，单位为s。每个指标支持的统计周期不一定相同，各个云产品支持的统计周期请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档，对应的统计周期列即为支持的统计周期。单请求的数据点数限制为1440个。
# @type Period: Integer
# @param StartTime: 起始时间，如2018-09-22T19:51:23+08:00
# @type StartTime: String
# @param EndTime: 结束时间，如2018-09-22T20:51:23+08:00，默认为当前时间。 EndTime不能小于StartTime
# @type EndTime: String
attr_accessor :Namespace, :MetricName, :Instances, :Period, :StartTime, :EndTime
def initialize(namespace=nil, metricname=nil, instances=nil, period=nil, starttime=nil, endtime=nil)
@Namespace = namespace
@MetricName = metricname
@Instances = instances
@Period = period
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@Namespace = params['Namespace']
@MetricName = params['MetricName']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
instance_tmp = Instance.new
instance_tmp.deserialize(i)
@Instances << instance_tmp
end
end
@Period = params['Period']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# GetMonitorData返回参数结构体
class GetMonitorDataResponse < TencentCloud::Common::AbstractModel
# @param Period: 统计周期
# @type Period: Integer
# @param MetricName: 指标名
# @type MetricName: String
# @param DataPoints: 数据点数组
# @type DataPoints: Array
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Period, :MetricName, :DataPoints, :StartTime, :EndTime, :RequestId
def initialize(period=nil, metricname=nil, datapoints=nil, starttime=nil, endtime=nil, requestid=nil)
@Period = period
@MetricName = metricname
@DataPoints = datapoints
@StartTime = starttime
@EndTime = endtime
@RequestId = requestid
end
def deserialize(params)
@Period = params['Period']
@MetricName = params['MetricName']
unless params['DataPoints'].nil?
@DataPoints = []
params['DataPoints'].each do |i|
datapoint_tmp = DataPoint.new
datapoint_tmp.deserialize(i)
@DataPoints << datapoint_tmp
end
end
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@RequestId = params['RequestId']
end
end
# 实例维度组合数组
class Instance < TencentCloud::Common::AbstractModel
# @param Dimensions: 实例的维度组合
# @type Dimensions: Array
attr_accessor :Dimensions
def initialize(dimensions=nil)
@Dimensions = dimensions
end
def deserialize(params)
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
dimension_tmp = Dimension.new
dimension_tmp.deserialize(i)
@Dimensions << dimension_tmp
end
end
end
end
# DescribeBasicAlarmList返回的Alarms里的InstanceGroup
class InstanceGroup < TencentCloud::Common::AbstractModel
# @param InstanceGroupId: 实例组ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroupId: Integer
# @param InstanceGroupName: 实例组名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceGroupName: String
attr_accessor :InstanceGroupId, :InstanceGroupName
def initialize(instancegroupid=nil, instancegroupname=nil)
@InstanceGroupId = instancegroupid
@InstanceGroupName = instancegroupname
end
def deserialize(params)
@InstanceGroupId = params['InstanceGroupId']
@InstanceGroupName = params['InstanceGroupName']
end
end
# 告警对象所属实例组
class InstanceGroups < TencentCloud::Common::AbstractModel
# @param Id: 实例组 Id
# @type Id: Integer
# @param Name: 实例组名称
# @type Name: String
attr_accessor :Id, :Name
def initialize(id=nil, name=nil)
@Id = id
@Name = name
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
end
end
# 指标，可用于设置告警、查询数据
class Metric < TencentCloud::Common::AbstractModel
# @param Namespace: 告警策略类型
# @type Namespace: String
# @param MetricName: 指标名
# @type MetricName: String
# @param Description: 指标展示名
# @type Description: String
# @param Min: 最小值
# @type Min: Float
# @param Max: 最大值
# @type Max: Float
# @param Dimensions: 维度列表
# @type Dimensions: Array
# @param Unit: 单位
# @type Unit: String
# @param MetricConfig: 指标配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricConfig: :class:`Tencentcloud::Monitor.v20180724.models.MetricConfig`
attr_accessor :Namespace, :MetricName, :Description, :Min, :Max, :Dimensions, :Unit, :MetricConfig
def initialize(namespace=nil, metricname=nil, description=nil, min=nil, max=nil, dimensions=nil, unit=nil, metricconfig=nil)
@Namespace = namespace
@MetricName = metricname
@Description = description
@Min = min
@Max = max
@Dimensions = dimensions
@Unit = unit
@MetricConfig = metricconfig
end
def deserialize(params)
@Namespace = params['Namespace']
@MetricName = params['MetricName']
@Description = params['Description']
@Min = params['Min']
@Max = params['Max']
@Dimensions = params['Dimensions']
@Unit = params['Unit']
unless params['MetricConfig'].nil?
@MetricConfig = MetricConfig.new
@MetricConfig.deserialize(params['MetricConfig'])
end
end
end
# 指标配置
class MetricConfig < TencentCloud::Common::AbstractModel
# @param Operator: 允许使用的运算符
# @type Operator: Array
# @param Period: 允许配置的数据周期，以秒为单位
# @type Period: Array
# @param ContinuePeriod: 允许配置的持续周期个数
# @type ContinuePeriod: Array
attr_accessor :Operator, :Period, :ContinuePeriod
def initialize(operator=nil, period=nil, continueperiod=nil)
@Operator = operator
@Period = period
@ContinuePeriod = continueperiod
end
def deserialize(params)
@Operator = params['Operator']
@Period = params['Period']
@ContinuePeriod = params['ContinuePeriod']
end
end
# DescribeMetricData接口出参
class MetricData < TencentCloud::Common::AbstractModel
# @param MetricName: 指标名
# @type MetricName: String
# @param Points: 监控数据点
# @type Points: Array
attr_accessor :MetricName, :Points
def initialize(metricname=nil, points=nil)
@MetricName = metricname
@Points = points
end
def deserialize(params)
@MetricName = params['MetricName']
unless params['Points'].nil?
@Points = []
params['Points'].each do |i|
metricdatapoint_tmp = MetricDataPoint.new
metricdatapoint_tmp.deserialize(i)
@Points << metricdatapoint_tmp
end
end
end
end
# DescribeMetricData出参
class MetricDataPoint < TencentCloud::Common::AbstractModel
# @param Dimensions: 实例对象维度组合
# @type Dimensions: Array
# @param Values: 数据点列表
# @type Values: Array
attr_accessor :Dimensions, :Values
def initialize(dimensions=nil, values=nil)
@Dimensions = dimensions
@Values = values
end
def deserialize(params)
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
dimension_tmp = Dimension.new
dimension_tmp.deserialize(i)
@Dimensions << dimension_tmp
end
end
unless params['Values'].nil?
@Values = []
params['Values'].each do |i|
point_tmp = Point.new
point_tmp.deserialize(i)
@Values << point_tmp
end
end
end
end
# 指标名称和值的封装
class MetricDatum < TencentCloud::Common::AbstractModel
# @param MetricName: 指标名称
# @type MetricName: String
# @param Value: 指标的值
# @type Value: Integer
attr_accessor :MetricName, :Value
def initialize(metricname=nil, value=nil)
@MetricName = metricname
@Value = value
end
def deserialize(params)
@MetricName = params['MetricName']
@Value = params['Value']
end
end
# 指标数据的解释
class MetricObjectMeaning < TencentCloud::Common::AbstractModel
# @param En: 指标英文解释
# @type En: String
# @param Zh: 指标中文解释
# @type Zh: String
attr_accessor :En, :Zh
def initialize(en=nil, zh=nil)
@En = en
@Zh = zh
end
def deserialize(params)
@En = params['En']
@Zh = params['Zh']
end
end
# 对业务指标的单位及支持统计周期的描述
class MetricSet < TencentCloud::Common::AbstractModel
# @param Namespace: 命名空间，每个云产品会有一个命名空间
# @type Namespace: String
# @param MetricName: 指标名称
# @type MetricName: String
# @param Unit: 指标使用的单位
# @type Unit: String
# @param UnitCname: 指标使用的单位
# @type UnitCname: String
# @param Period: 指标支持的统计周期，单位是秒，如60、300
# @type Period: Array
# @param Periods: 统计周期内指标方式
# @type Periods: Array
# @param Meaning: 统计指标含义解释
# @type Meaning: :class:`Tencentcloud::Monitor.v20180724.models.MetricObjectMeaning`
# @param Dimensions: 维度描述信息
# @type Dimensions: Array
# @param MetricCName: 指标中文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricCName: String
# @param MetricEName: 指标英文名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MetricEName: String
attr_accessor :Namespace, :MetricName, :Unit, :UnitCname, :Period, :Periods, :Meaning, :Dimensions, :MetricCName, :MetricEName
def initialize(namespace=nil, metricname=nil, unit=nil, unitcname=nil, period=nil, periods=nil, meaning=nil, dimensions=nil, metriccname=nil, metricename=nil)
@Namespace = namespace
@MetricName = metricname
@Unit = unit
@UnitCname = unitcname
@Period = period
@Periods = periods
@Meaning = meaning
@Dimensions = dimensions
@MetricCName = metriccname
@MetricEName = metricename
end
def deserialize(params)
@Namespace = params['Namespace']
@MetricName = params['MetricName']
@Unit = params['Unit']
@UnitCname = params['UnitCname']
@Period = params['Period']
unless params['Periods'].nil?
@Periods = []
params['Periods'].each do |i|
periodsst_tmp = PeriodsSt.new
periodsst_tmp.deserialize(i)
@Periods << periodsst_tmp
end
end
unless params['Meaning'].nil?
@Meaning = MetricObjectMeaning.new
@Meaning.deserialize(params['Meaning'])
end
unless params['Dimensions'].nil?
@Dimensions = []
params['Dimensions'].each do |i|
dimensionsdesc_tmp = DimensionsDesc.new
dimensionsdesc_tmp.deserialize(i)
@Dimensions << dimensionsdesc_tmp
end
end
@MetricCName = params['MetricCName']
@MetricEName = params['MetricEName']
end
end
# DescribeMidDimensionValueList的查询条件
class MidQueryCondition < TencentCloud::Common::AbstractModel
# @param Key: 维度
# @type Key: String
# @param Operator: 操作符，支持等于(eq)、不等于(ne)，以及in
# @type Operator: String
# @param Value: 维度值，当Op是eq、ne时，只使用第一个元素
# @type Value: Array
attr_accessor :Key, :Operator, :Value
def initialize(key=nil, operator=nil, value=nil)
@Key = key
@Operator = operator
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Operator = params['Operator']
@Value = params['Value']
end
end
# ModifyAlarmNotice请求参数结构体
class ModifyAlarmNoticeRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param Name: 告警通知规则名称 60字符以内
# @type Name: String
# @param NoticeType: 通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=都通知
# @type NoticeType: String
# @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文
# @type NoticeLanguage: String
# @param NoticeId: 告警通知模板 ID
# @type NoticeId: String
# @param UserNotices: 用户通知 最多5个
# @type UserNotices: Array
# @param URLNotices: 回调通知 最多3个
# @type URLNotices: Array
attr_accessor :Module, :Name, :NoticeType, :NoticeLanguage, :NoticeId, :UserNotices, :URLNotices
def initialize(_module=nil, name=nil, noticetype=nil, noticelanguage=nil, noticeid=nil, usernotices=nil, urlnotices=nil)
@Module = _module
@Name = name
@NoticeType = noticetype
@NoticeLanguage = noticelanguage
@NoticeId = noticeid
@UserNotices = usernotices
@URLNotices = urlnotices
end
def deserialize(params)
@Module = params['Module']
@Name = params['Name']
@NoticeType = params['NoticeType']
@NoticeLanguage = params['NoticeLanguage']
@NoticeId = params['NoticeId']
unless params['UserNotices'].nil?
@UserNotices = []
params['UserNotices'].each do |i|
usernotice_tmp = UserNotice.new
usernotice_tmp.deserialize(i)
@UserNotices << usernotice_tmp
end
end
unless params['URLNotices'].nil?
@URLNotices = []
params['URLNotices'].each do |i|
urlnotice_tmp = URLNotice.new
urlnotice_tmp.deserialize(i)
@URLNotices << urlnotice_tmp
end
end
end
end
# ModifyAlarmNotice返回参数结构体
class ModifyAlarmNoticeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmPolicyCondition请求参数结构体
class ModifyAlarmPolicyConditionRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param ConditionTemplateId: 触发条件模板 Id，可不传
# @type ConditionTemplateId: Integer
# @param Condition: 指标触发条件
# @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition`
# @param EventCondition: 事件触发条件
# @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition`
# @param Filter: 全局过滤条件
# @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter`
# @param GroupBy: 聚合维度列表，指定按哪些维度 key 来做 group by
# @type GroupBy: Array
attr_accessor :Module, :PolicyId, :ConditionTemplateId, :Condition, :EventCondition, :Filter, :GroupBy
def initialize(_module=nil, policyid=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, filter=nil, groupby=nil)
@Module = _module
@PolicyId = policyid
@ConditionTemplateId = conditiontemplateid
@Condition = condition
@EventCondition = eventcondition
@Filter = filter
@GroupBy = groupby
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@ConditionTemplateId = params['ConditionTemplateId']
unless params['Condition'].nil?
@Condition = AlarmPolicyCondition.new
@Condition.deserialize(params['Condition'])
end
unless params['EventCondition'].nil?
@EventCondition = AlarmPolicyEventCondition.new
@EventCondition.deserialize(params['EventCondition'])
end
unless params['Filter'].nil?
@Filter = AlarmPolicyFilter.new
@Filter.deserialize(params['Filter'])
end
@GroupBy = params['GroupBy']
end
end
# ModifyAlarmPolicyCondition返回参数结构体
class ModifyAlarmPolicyConditionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmPolicyInfo请求参数结构体
class ModifyAlarmPolicyInfoRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param Key: 要修改的字段 NAME=策略名称 REMARK=策略备注
# @type Key: String
# @param Value: 修改后的值
# @type Value: String
attr_accessor :Module, :PolicyId, :Key, :Value
def initialize(_module=nil, policyid=nil, key=nil, value=nil)
@Module = _module
@PolicyId = policyid
@Key = key
@Value = value
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@Key = params['Key']
@Value = params['Value']
end
end
# ModifyAlarmPolicyInfo返回参数结构体
class ModifyAlarmPolicyInfoResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmPolicyNotice请求参数结构体
class ModifyAlarmPolicyNoticeRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param NoticeIds: 告警通知模板 ID 列表
# @type NoticeIds: Array
attr_accessor :Module, :PolicyId, :NoticeIds
def initialize(_module=nil, policyid=nil, noticeids=nil)
@Module = _module
@PolicyId = policyid
@NoticeIds = noticeids
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@NoticeIds = params['NoticeIds']
end
end
# ModifyAlarmPolicyNotice返回参数结构体
class ModifyAlarmPolicyNoticeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmPolicyStatus请求参数结构体
class ModifyAlarmPolicyStatusRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param Enable: 启停状态 0=停用 1=启用
# @type Enable: Integer
attr_accessor :Module, :PolicyId, :Enable
def initialize(_module=nil, policyid=nil, enable=nil)
@Module = _module
@PolicyId = policyid
@Enable = enable
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@Enable = params['Enable']
end
end
# ModifyAlarmPolicyStatus返回参数结构体
class ModifyAlarmPolicyStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmPolicyTasks请求参数结构体
class ModifyAlarmPolicyTasksRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，这里填“monitor”
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
# @param TriggerTasks: 告警策略触发任务列表，空数据代表解绑
# @type TriggerTasks: Array
attr_accessor :Module, :PolicyId, :TriggerTasks
def initialize(_module=nil, policyid=nil, triggertasks=nil)
@Module = _module
@PolicyId = policyid
@TriggerTasks = triggertasks
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
unless params['TriggerTasks'].nil?
@TriggerTasks = []
params['TriggerTasks'].each do |i|
alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new
alarmpolicytriggertask_tmp.deserialize(i)
@TriggerTasks << alarmpolicytriggertask_tmp
end
end
end
end
# ModifyAlarmPolicyTasks返回参数结构体
class ModifyAlarmPolicyTasksResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAlarmReceivers请求参数结构体
class ModifyAlarmReceiversRequest < TencentCloud::Common::AbstractModel
# @param GroupId: 需要修改接收人的策略组Id
# @type GroupId: Integer
# @param Module: 必填。固定为“monitor”
# @type Module: String
# @param ReceiverInfos: 新接收人信息, 没有填写则删除所有接收人
# @type ReceiverInfos: Array
attr_accessor :GroupId, :Module, :ReceiverInfos
def initialize(groupid=nil, _module=nil, receiverinfos=nil)
@GroupId = groupid
@Module = _module
@ReceiverInfos = receiverinfos
end
def deserialize(params)
@GroupId = params['GroupId']
@Module = params['Module']
unless params['ReceiverInfos'].nil?
@ReceiverInfos = []
params['ReceiverInfos'].each do |i|
receiverinfo_tmp = ReceiverInfo.new
receiverinfo_tmp.deserialize(i)
@ReceiverInfos << receiverinfo_tmp
end
end
end
end
# ModifyAlarmReceivers返回参数结构体
class ModifyAlarmReceiversResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 修改告警策略组传入的指标阈值条件
class ModifyPolicyGroupCondition < TencentCloud::Common::AbstractModel
# @param MetricId: 指标id
# @type MetricId: Integer
# @param CalcType: 比较类型，1表示大于，2表示大于等于，3表示小于，4表示小于等于，5表示相等，6表示不相等
# @type CalcType: Integer
# @param CalcValue: 检测阈值
# @type CalcValue: String
# @param CalcPeriod: 检测指标的数据周期
# @type CalcPeriod: Integer
# @param ContinuePeriod: 持续周期个数
# @type ContinuePeriod: Integer
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param RuleId: 规则id，不填表示新增，填写了ruleId表示在已存在的规则基础上进行修改
# @type RuleId: Integer
attr_accessor :MetricId, :CalcType, :CalcValue, :CalcPeriod, :ContinuePeriod, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId
def initialize(metricid=nil, calctype=nil, calcvalue=nil, calcperiod=nil, continueperiod=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil)
@MetricId = metricid
@CalcType = calctype
@CalcValue = calcvalue
@CalcPeriod = calcperiod
@ContinuePeriod = continueperiod
@AlarmNotifyType = alarmnotifytype
@AlarmNotifyPeriod = alarmnotifyperiod
@RuleId = ruleid
end
def deserialize(params)
@MetricId = params['MetricId']
@CalcType = params['CalcType']
@CalcValue = params['CalcValue']
@CalcPeriod = params['CalcPeriod']
@ContinuePeriod = params['ContinuePeriod']
@AlarmNotifyType = params['AlarmNotifyType']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@RuleId = params['RuleId']
end
end
# 修改告警策略组传入的事件告警条件
class ModifyPolicyGroupEventCondition < TencentCloud::Common::AbstractModel
# @param EventId: 事件id
# @type EventId: Integer
# @param AlarmNotifyType: 告警发送收敛类型。0连续告警，1指数告警
# @type AlarmNotifyType: Integer
# @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次
# @type AlarmNotifyPeriod: Integer
# @param RuleId: 规则id，不填表示新增，填写了ruleId表示在已存在的规则基础上进行修改
# @type RuleId: Integer
attr_accessor :EventId, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId
def initialize(eventid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil)
@EventId = eventid
@AlarmNotifyType = alarmnotifytype
@AlarmNotifyPeriod = alarmnotifyperiod
@RuleId = ruleid
end
def deserialize(params)
@EventId = params['EventId']
@AlarmNotifyType = params['AlarmNotifyType']
@AlarmNotifyPeriod = params['AlarmNotifyPeriod']
@RuleId = params['RuleId']
end
end
# ModifyPolicyGroup请求参数结构体
class ModifyPolicyGroupRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id
# @type GroupId: Integer
# @param ViewName: 告警类型
# @type ViewName: String
# @param GroupName: 策略组名称
# @type GroupName: String
# @param IsUnionRule: 指标告警条件的且或关系，1表示且告警，所有指标告警条件都达到才告警，0表示或告警，任意指标告警条件达到都告警
# @type IsUnionRule: Integer
# @param Conditions: 指标告警条件规则，不填表示删除已有的所有指标告警条件规则
# @type Conditions: Array
# @param EventConditions: 事件告警条件，不填表示删除已有的事件告警条件
# @type EventConditions: Array
# @param ConditionTempGroupId: 模板策略组id
# @type ConditionTempGroupId: Integer
attr_accessor :Module, :GroupId, :ViewName, :GroupName, :IsUnionRule, :Conditions, :EventConditions, :ConditionTempGroupId
def initialize(_module=nil, groupid=nil, viewname=nil, groupname=nil, isunionrule=nil, conditions=nil, eventconditions=nil, conditiontempgroupid=nil)
@Module = _module
@GroupId = groupid
@ViewName = viewname
@GroupName = groupname
@IsUnionRule = isunionrule
@Conditions = conditions
@EventConditions = eventconditions
@ConditionTempGroupId = conditiontempgroupid
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
@ViewName = params['ViewName']
@GroupName = params['GroupName']
@IsUnionRule = params['IsUnionRule']
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
modifypolicygroupcondition_tmp = ModifyPolicyGroupCondition.new
modifypolicygroupcondition_tmp.deserialize(i)
@Conditions << modifypolicygroupcondition_tmp
end
end
unless params['EventConditions'].nil?
@EventConditions = []
params['EventConditions'].each do |i|
modifypolicygroupeventcondition_tmp = ModifyPolicyGroupEventCondition.new
modifypolicygroupeventcondition_tmp.deserialize(i)
@EventConditions << modifypolicygroupeventcondition_tmp
end
end
@ConditionTempGroupId = params['ConditionTempGroupId']
end
end
# ModifyPolicyGroup返回参数结构体
class ModifyPolicyGroupResponse < TencentCloud::Common::AbstractModel
# @param GroupId: 策略组id
# @type GroupId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GroupId, :RequestId
def initialize(groupid=nil, requestid=nil)
@GroupId = groupid
@RequestId = requestid
end
def deserialize(params)
@GroupId = params['GroupId']
@RequestId = params['RequestId']
end
end
# 策略类型
class MonitorTypeNamespace < TencentCloud::Common::AbstractModel
# @param MonitorType: 监控类型
# @type MonitorType: String
# @param Namespace: 策略类型值
# @type Namespace: String
attr_accessor :MonitorType, :Namespace
def initialize(monitortype=nil, namespace=nil)
@MonitorType = monitortype
@Namespace = namespace
end
def deserialize(params)
@MonitorType = params['MonitorType']
@Namespace = params['Namespace']
end
end
# 周期内的统计方式
class PeriodsSt < TencentCloud::Common::AbstractModel
# @param Period: 周期
# @type Period: String
# @param StatType: 统计方式
# @type StatType: Array
attr_accessor :Period, :StatType
def initialize(period=nil, stattype=nil)
@Period = period
@StatType = stattype
end
def deserialize(params)
@Period = params['Period']
@StatType = params['StatType']
end
end
# 监控数据点
class Point < TencentCloud::Common::AbstractModel
# @param Timestamp: 该监控数据点生成的时间点
# @type Timestamp: Integer
# @param Value: 监控数据点的值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: Float
attr_accessor :Timestamp, :Value
def initialize(timestamp=nil, value=nil)
@Timestamp = timestamp
@Value = value
end
def deserialize(params)
@Timestamp = params['Timestamp']
@Value = params['Value']
end
end
# 策略组信息
class PolicyGroup < TencentCloud::Common::AbstractModel
# @param CanSetDefault: 是否可设为默认告警策略
# @type CanSetDefault: Boolean
# @param GroupID: 告警策略组ID
# @type GroupID: Integer
# @param GroupName: 告警策略组名称
# @type GroupName: String
# @param InsertTime: 创建时间
# @type InsertTime: Integer
# @param IsDefault: 是否为默认告警策略
# @type IsDefault: Integer
# @param Enable: 告警策略启用状态
# @type Enable: Boolean
# @param LastEditUin: 最后修改人UIN
# @type LastEditUin: Integer
# @param NoShieldedInstanceCount: 未屏蔽的实例数
# @type NoShieldedInstanceCount: Integer
# @param ParentGroupID: 父策略组ID
# @type ParentGroupID: Integer
# @param ProjectID: 所属项目ID
# @type ProjectID: Integer
# @param ReceiverInfos: 告警接收对象信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverInfos: Array
# @param Remark: 备注信息
# @type Remark: String
# @param UpdateTime: 修改时间
# @type UpdateTime: Integer
# @param TotalInstanceCount: 总绑定实例数
# @type TotalInstanceCount: Integer
# @param ViewName: 视图
# @type ViewName: String
# @param IsUnionRule: 是否为与关系规则
# @type IsUnionRule: Integer
attr_accessor :CanSetDefault, :GroupID, :GroupName, :InsertTime, :IsDefault, :Enable, :LastEditUin, :NoShieldedInstanceCount, :ParentGroupID, :ProjectID, :ReceiverInfos, :Remark, :UpdateTime, :TotalInstanceCount, :ViewName, :IsUnionRule
def initialize(cansetdefault=nil, groupid=nil, groupname=nil, inserttime=nil, isdefault=nil, enable=nil, lastedituin=nil, noshieldedinstancecount=nil, parentgroupid=nil, projectid=nil, receiverinfos=nil, remark=nil, updatetime=nil, totalinstancecount=nil, viewname=nil, isunionrule=nil)
@CanSetDefault = cansetdefault
@GroupID = groupid
@GroupName = groupname
@InsertTime = inserttime
@IsDefault = isdefault
@Enable = enable
@LastEditUin = lastedituin
@NoShieldedInstanceCount = noshieldedinstancecount
@ParentGroupID = parentgroupid
@ProjectID = projectid
@ReceiverInfos = receiverinfos
@Remark = remark
@UpdateTime = updatetime
@TotalInstanceCount = totalinstancecount
@ViewName = viewname
@IsUnionRule = isunionrule
end
def deserialize(params)
@CanSetDefault = params['CanSetDefault']
@GroupID = params['GroupID']
@GroupName = params['GroupName']
@InsertTime = params['InsertTime']
@IsDefault = params['IsDefault']
@Enable = params['Enable']
@LastEditUin = params['LastEditUin']
@NoShieldedInstanceCount = params['NoShieldedInstanceCount']
@ParentGroupID = params['ParentGroupID']
@ProjectID = params['ProjectID']
unless params['ReceiverInfos'].nil?
@ReceiverInfos = []
params['ReceiverInfos'].each do |i|
policygroupreceiverinfo_tmp = PolicyGroupReceiverInfo.new
policygroupreceiverinfo_tmp.deserialize(i)
@ReceiverInfos << policygroupreceiverinfo_tmp
end
end
@Remark = params['Remark']
@UpdateTime = params['UpdateTime']
@TotalInstanceCount = params['TotalInstanceCount']
@ViewName = params['ViewName']
@IsUnionRule = params['IsUnionRule']
end
end
# 2018版策略模板列表接收人信息
class PolicyGroupReceiverInfo < TencentCloud::Common::AbstractModel
# @param EndTime: 有效时段结束时间
# @type EndTime: Integer
# @param NeedSendNotice: 是否需要发送通知
# @type NeedSendNotice: Integer
# @param NotifyWay: 告警接收渠道
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotifyWay: Array
# @param PersonInterval: 电话告警对个人间隔（秒）
# @type PersonInterval: Integer
# @param ReceiverGroupList: 消息接收组列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverGroupList: Array
# @param ReceiverType: 接受者类型
# @type ReceiverType: String
# @param ReceiverUserList: 接收人列表。通过平台接口查询到的接收人id列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverUserList: Array
# @param RecoverNotify: 告警恢复通知方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RecoverNotify: Array
# @param RoundInterval: 电话告警每轮间隔（秒）
# @type RoundInterval: Integer
# @param RoundNumber: 电话告警轮数
# @type RoundNumber: Integer
# @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SendFor: Array
# @param StartTime: 有效时段开始时间
# @type StartTime: Integer
# @param UIDList: 电话告警接收者uid
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UIDList: Array
attr_accessor :EndTime, :NeedSendNotice, :NotifyWay, :PersonInterval, :ReceiverGroupList, :ReceiverType, :ReceiverUserList, :RecoverNotify, :RoundInterval, :RoundNumber, :SendFor, :StartTime, :UIDList
def initialize(endtime=nil, needsendnotice=nil, notifyway=nil, personinterval=nil, receivergrouplist=nil, receivertype=nil, receiveruserlist=nil, recovernotify=nil, roundinterval=nil, roundnumber=nil, sendfor=nil, starttime=nil, uidlist=nil)
@EndTime = endtime
@NeedSendNotice = needsendnotice
@NotifyWay = notifyway
@PersonInterval = personinterval
@ReceiverGroupList = receivergrouplist
@ReceiverType = receivertype
@ReceiverUserList = receiveruserlist
@RecoverNotify = recovernotify
@RoundInterval = roundinterval
@RoundNumber = roundnumber
@SendFor = sendfor
@StartTime = starttime
@UIDList = uidlist
end
def deserialize(params)
@EndTime = params['EndTime']
@NeedSendNotice = params['NeedSendNotice']
@NotifyWay = params['NotifyWay']
@PersonInterval = params['PersonInterval']
@ReceiverGroupList = params['ReceiverGroupList']
@ReceiverType = params['ReceiverType']
@ReceiverUserList = params['ReceiverUserList']
@RecoverNotify = params['RecoverNotify']
@RoundInterval = params['RoundInterval']
@RoundNumber = params['RoundNumber']
@SendFor = params['SendFor']
@StartTime = params['StartTime']
@UIDList = params['UIDList']
end
end
# 策略标签
class PolicyTag < TencentCloud::Common::AbstractModel
# @param Key: 标签Key
# @type Key: String
# @param Value: 标签Value
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# 云监控支持的产品简要信息
class ProductSimple < TencentCloud::Common::AbstractModel
# @param Namespace: 命名空间
# @type Namespace: String
# @param ProductName: 产品中文名称
# @type ProductName: String
# @param ProductEnName: 产品英文名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProductEnName: String
attr_accessor :Namespace, :ProductName, :ProductEnName
def initialize(namespace=nil, productname=nil, productenname=nil)
@Namespace = namespace
@ProductName = productname
@ProductEnName = productenname
end
def deserialize(params)
@Namespace = params['Namespace']
@ProductName = params['ProductName']
@ProductEnName = params['ProductEnName']
end
end
# 实例的授权信息
class PrometheusInstanceGrantInfo < TencentCloud::Common::AbstractModel
# @param HasChargeOperation: 是否有计费操作权限(1=有，2=无)
# @type HasChargeOperation: Integer
# @param HasVpcDisplay: 是否显示VPC信息的权限(1=有，2=无)
# @type HasVpcDisplay: Integer
# @param HasGrafanaStatusChange: 是否可修改Grafana的状态(1=有，2=无)
# @type HasGrafanaStatusChange: Integer
# @param HasAgentManage: 是否有管理agent的权限(1=有，2=无)
# @type HasAgentManage: Integer
# @param HasTkeManage: 是否有管理TKE集成的权限(1=有，2=无)
# @type HasTkeManage: Integer
# @param HasApiOperation: 是否显示API等信息(1=有, 2=无)
# @type HasApiOperation: Integer
attr_accessor :HasChargeOperation, :HasVpcDisplay, :HasGrafanaStatusChange, :HasAgentManage, :HasTkeManage, :HasApiOperation
def initialize(haschargeoperation=nil, hasvpcdisplay=nil, hasgrafanastatuschange=nil, hasagentmanage=nil, hastkemanage=nil, hasapioperation=nil)
@HasChargeOperation = haschargeoperation
@HasVpcDisplay = hasvpcdisplay
@HasGrafanaStatusChange = hasgrafanastatuschange
@HasAgentManage = hasagentmanage
@HasTkeManage = hastkemanage
@HasApiOperation = hasapioperation
end
def deserialize(params)
@HasChargeOperation = params['HasChargeOperation']
@HasVpcDisplay = params['HasVpcDisplay']
@HasGrafanaStatusChange = params['HasGrafanaStatusChange']
@HasAgentManage = params['HasAgentManage']
@HasTkeManage = params['HasTkeManage']
@HasApiOperation = params['HasApiOperation']
end
end
# Prometheus 服务响应体
class PrometheusInstancesItem < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param InstanceName: 实例名称。
# @type InstanceName: String
# @param InstanceChargeType: 实例计费模式。取值范围：
# <ul>
# <li>2：包年包月</li>
# <li>3：按量</li>
# </ul>
# @type InstanceChargeType: Integer
# @param RegionId: 地域 ID
# @type RegionId: Integer
# @param Zone: 可用区
# @type Zone: String
# @param VpcId: VPC ID
# @type VpcId: String
# @param SubnetId: 子网 ID
# @type SubnetId: String
# @param DataRetentionTime: 存储周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DataRetentionTime: Integer
# @param InstanceStatus: 实例业务状态。取值范围：
# <ul>
# <li>1：正在创建</li>
# <li>2：运行中</li>
# <li>3：异常</li>
# <li>4：重建中</li>
# <li>5：销毁中</li>
# <li>6：已停服</li>
# <li>8：欠费停服中</li>
# <li>9：欠费已停服</li>
# </ul>
# @type InstanceStatus: Integer
# @param GrafanaURL: Grafana 面板 URL
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaURL: String
# @param CreatedAt: 创建时间
# @type CreatedAt: String
# @param EnableGrafana: 是否开启 Grafana
# <li>0：不开启</li>
# <li>1：开启</li>
# @type EnableGrafana: Integer
# @param IPv4Address: 实例IPV4地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IPv4Address: String
# @param TagSpecification: 实例关联的标签列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagSpecification: Array
# @param ExpireTime: 购买的实例过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireTime: String
# @param ChargeStatus: 计费状态
# <ul>
# <li>1：正常</li>
# <li>2：过期</li>
# <li>3：销毁</li>
# <li>4：分配中</li>
# <li>5：分配失败</li>
# </ul>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ChargeStatus: Integer
# @param SpecName: 规格名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SpecName: String
# @param AutoRenewFlag: 自动续费标记
# <ul>
# <li>0：不自动续费</li>
# <li>1：开启自动续费</li>
# <li>2：禁止自动续费</li>
# <li>-1：无效</ii>
# </ul>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoRenewFlag: Integer
# @param IsNearExpire: 是否快过期
# <ul>
# <li>0：否</li>
# <li>1：快过期</li>
# </ul>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsNearExpire: Integer
# @param AuthToken: 数据写入需要的 Token
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AuthToken: String
# @param RemoteWrite: Prometheus Remote Write 的地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RemoteWrite: String
# @param ApiRootPath: Prometheus HTTP Api 根地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ApiRootPath: String
# @param ProxyAddress: Proxy 的地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProxyAddress: String
# @param GrafanaStatus: Grafana 运行状态
# <ul>
# <li>1：正在创建</li>
# <li>2：运行中</li>
# <li>3：异常</li>
# <li>4：重启中</li>
# <li>5：销毁中</li>
# <li>6：已停机</li>
# <li>7：已删除</li>
# </ul>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaStatus: Integer
# @param GrafanaIpWhiteList: Grafana IP 白名单列表，使用英文分号分隔
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaIpWhiteList: String
# @param Grant: 实例的授权信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Grant: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusInstanceGrantInfo`
# @param GrafanaInstanceId: 绑定的 Grafana 实例 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GrafanaInstanceId: String
attr_accessor :InstanceId, :InstanceName, :InstanceChargeType, :RegionId, :Zone, :VpcId, :SubnetId, :DataRetentionTime, :InstanceStatus, :GrafanaURL, :CreatedAt, :EnableGrafana, :IPv4Address, :TagSpecification, :ExpireTime, :ChargeStatus, :SpecName, :AutoRenewFlag, :IsNearExpire, :AuthToken, :RemoteWrite, :ApiRootPath, :ProxyAddress, :GrafanaStatus, :GrafanaIpWhiteList, :Grant, :GrafanaInstanceId
def initialize(instanceid=nil, instancename=nil, instancechargetype=nil, regionid=nil, zone=nil, vpcid=nil, subnetid=nil, dataretentiontime=nil, instancestatus=nil, grafanaurl=nil, createdat=nil, enablegrafana=nil, ipv4address=nil, tagspecification=nil, expiretime=nil, chargestatus=nil, specname=nil, autorenewflag=nil, isnearexpire=nil, authtoken=nil, remotewrite=nil, apirootpath=nil, proxyaddress=nil, grafanastatus=nil, grafanaipwhitelist=nil, grant=nil, grafanainstanceid=nil)
@InstanceId = instanceid
@InstanceName = instancename
@InstanceChargeType = instancechargetype
@RegionId = regionid
@Zone = zone
@VpcId = vpcid
@SubnetId = subnetid
@DataRetentionTime = dataretentiontime
@InstanceStatus = instancestatus
@GrafanaURL = grafanaurl
@CreatedAt = createdat
@EnableGrafana = enablegrafana
@IPv4Address = ipv4address
@TagSpecification = tagspecification
@ExpireTime = expiretime
@ChargeStatus = chargestatus
@SpecName = specname
@AutoRenewFlag = autorenewflag
@IsNearExpire = isnearexpire
@AuthToken = authtoken
@RemoteWrite = remotewrite
@ApiRootPath = apirootpath
@ProxyAddress = proxyaddress
@GrafanaStatus = grafanastatus
@GrafanaIpWhiteList = grafanaipwhitelist
@Grant = grant
@GrafanaInstanceId = grafanainstanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceChargeType = params['InstanceChargeType']
@RegionId = params['RegionId']
@Zone = params['Zone']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@DataRetentionTime = params['DataRetentionTime']
@InstanceStatus = params['InstanceStatus']
@GrafanaURL = params['GrafanaURL']
@CreatedAt = params['CreatedAt']
@EnableGrafana = params['EnableGrafana']
@IPv4Address = params['IPv4Address']
unless params['TagSpecification'].nil?
@TagSpecification = []
params['TagSpecification'].each do |i|
prometheustag_tmp = PrometheusTag.new
prometheustag_tmp.deserialize(i)
@TagSpecification << prometheustag_tmp
end
end
@ExpireTime = params['ExpireTime']
@ChargeStatus = params['ChargeStatus']
@SpecName = params['SpecName']
@AutoRenewFlag = params['AutoRenewFlag']
@IsNearExpire = params['IsNearExpire']
@AuthToken = params['AuthToken']
@RemoteWrite = params['RemoteWrite']
@ApiRootPath = params['ApiRootPath']
@ProxyAddress = params['ProxyAddress']
@GrafanaStatus = params['GrafanaStatus']
@GrafanaIpWhiteList = params['GrafanaIpWhiteList']
unless params['Grant'].nil?
@Grant = PrometheusInstanceGrantInfo.new
@Grant.deserialize(params['Grant'])
end
@GrafanaInstanceId = params['GrafanaInstanceId']
end
end
# prometheus 报警规则 KV 参数
class PrometheusRuleKV < TencentCloud::Common::AbstractModel
# @param Key: 键
# @type Key: String
# @param Value: 值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# prometheus 报警规则集
class PrometheusRuleSet < TencentCloud::Common::AbstractModel
# @param RuleId: 规则 ID
# @type RuleId: String
# @param RuleName: 规则名称
# @type RuleName: String
# @param RuleState: 规则状态码
# @type RuleState: Integer
# @param Type: 规则类别
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param Labels: 规则标签列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Labels: Array
# @param Annotations: 规则注释列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Annotations: Array
# @param Expr: 规则表达式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Expr: String
# @param Duration: 规则报警持续时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Duration: String
# @param Receivers: 报警接收组列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Receivers: Array
# @param Health: 规则运行健康状态，取值如下：
# <li>unknown 未知状态</li>
# <li>pending 加载中</li>
# <li>ok 运行正常</li>
# <li>err 运行错误</li>
# @type Health: String
# @param CreatedAt: 规则创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedAt: String
# @param UpdatedAt: 规则更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdatedAt: String
attr_accessor :RuleId, :RuleName, :RuleState, :Type, :Labels, :Annotations, :Expr, :Duration, :Receivers, :Health, :CreatedAt, :UpdatedAt
def initialize(ruleid=nil, rulename=nil, rulestate=nil, type=nil, labels=nil, annotations=nil, expr=nil, duration=nil, receivers=nil, health=nil, createdat=nil, updatedat=nil)
@RuleId = ruleid
@RuleName = rulename
@RuleState = rulestate
@Type = type
@Labels = labels
@Annotations = annotations
@Expr = expr
@Duration = duration
@Receivers = receivers
@Health = health
@CreatedAt = createdat
@UpdatedAt = updatedat
end
def deserialize(params)
@RuleId = params['RuleId']
@RuleName = params['RuleName']
@RuleState = params['RuleState']
@Type = params['Type']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Labels << prometheusrulekv_tmp
end
end
unless params['Annotations'].nil?
@Annotations = []
params['Annotations'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Annotations << prometheusrulekv_tmp
end
end
@Expr = params['Expr']
@Duration = params['Duration']
@Receivers = params['Receivers']
@Health = params['Health']
@CreatedAt = params['CreatedAt']
@UpdatedAt = params['UpdatedAt']
end
end
# Prometheus 托管服务标签
class PrometheusTag < TencentCloud::Common::AbstractModel
# @param Key: 标签的健值
# @type Key: String
# @param Value: 标签对应的值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# PutMonitorData请求参数结构体
class PutMonitorDataRequest < TencentCloud::Common::AbstractModel
# @param Metrics: 一组指标和数据
# @type Metrics: Array
# @param AnnounceIp: 上报时自行指定的 IP
# @type AnnounceIp: String
# @param AnnounceTimestamp: 上报时自行指定的时间戳
# @type AnnounceTimestamp: Integer
# @param AnnounceInstance: 上报时自行指定的 IP 或 产品实例ID
# @type AnnounceInstance: String
attr_accessor :Metrics, :AnnounceIp, :AnnounceTimestamp, :AnnounceInstance
def initialize(metrics=nil, announceip=nil, announcetimestamp=nil, announceinstance=nil)
@Metrics = metrics
@AnnounceIp = announceip
@AnnounceTimestamp = announcetimestamp
@AnnounceInstance = announceinstance
end
def deserialize(params)
unless params['Metrics'].nil?
@Metrics = []
params['Metrics'].each do |i|
metricdatum_tmp = MetricDatum.new
metricdatum_tmp.deserialize(i)
@Metrics << metricdatum_tmp
end
end
@AnnounceIp = params['AnnounceIp']
@AnnounceTimestamp = params['AnnounceTimestamp']
@AnnounceInstance = params['AnnounceInstance']
end
end
# PutMonitorData返回参数结构体
class PutMonitorDataResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 接收人信息
class ReceiverInfo < TencentCloud::Common::AbstractModel
# @param StartTime: 告警时间段开始时间。范围[0,86400)，作为unix时间戳转成北京时间后去掉日期，例如7200表示"10:0:0"
# @type StartTime: Integer
# @param EndTime: 告警时间段结束时间。含义同StartTime
# @type EndTime: Integer
# @param NotifyWay: 告警通知方式。可选 "SMS","SITE","EMAIL","CALL","WECHAT"
# @type NotifyWay: Array
# @param ReceiverType: 接收人类型。“group” 或 “user”
# @type ReceiverType: String
# @param Id: ReceiverId
# @type Id: Integer
# @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知)
# @type SendFor: Array
# @param UidList: 电话告警接收者uid
# @type UidList: Array
# @param RoundNumber: 电话告警轮数
# @type RoundNumber: Integer
# @param PersonInterval: 电话告警对个人间隔（秒）
# @type PersonInterval: Integer
# @param RoundInterval: 电话告警每轮间隔（秒）
# @type RoundInterval: Integer
# @param RecoverNotify: 恢复通知方式。可选"SMS"
# @type RecoverNotify: Array
# @param NeedSendNotice: 是否需要电话告警触达提示。0不需要，1需要
# @type NeedSendNotice: Integer
# @param ReceiverGroupList: 接收组列表。通过平台接口查询到的接收组id列表
# @type ReceiverGroupList: Array
# @param ReceiverUserList: 接收人列表。通过平台接口查询到的接收人id列表
# @type ReceiverUserList: Array
# @param ReceiveLanguage: 告警接收语言，枚举值（zh-CN，en-US）
# @type ReceiveLanguage: String
attr_accessor :StartTime, :EndTime, :NotifyWay, :ReceiverType, :Id, :SendFor, :UidList, :RoundNumber, :PersonInterval, :RoundInterval, :RecoverNotify, :NeedSendNotice, :ReceiverGroupList, :ReceiverUserList, :ReceiveLanguage
def initialize(starttime=nil, endtime=nil, notifyway=nil, receivertype=nil, id=nil, sendfor=nil, uidlist=nil, roundnumber=nil, personinterval=nil, roundinterval=nil, recovernotify=nil, needsendnotice=nil, receivergrouplist=nil, receiveruserlist=nil, receivelanguage=nil)
@StartTime = starttime
@EndTime = endtime
@NotifyWay = notifyway
@ReceiverType = receivertype
@Id = id
@SendFor = sendfor
@UidList = uidlist
@RoundNumber = roundnumber
@PersonInterval = personinterval
@RoundInterval = roundinterval
@RecoverNotify = recovernotify
@NeedSendNotice = needsendnotice
@ReceiverGroupList = receivergrouplist
@ReceiverUserList = receiveruserlist
@ReceiveLanguage = receivelanguage
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@NotifyWay = params['NotifyWay']
@ReceiverType = params['ReceiverType']
@Id = params['Id']
@SendFor = params['SendFor']
@UidList = params['UidList']
@RoundNumber = params['RoundNumber']
@PersonInterval = params['PersonInterval']
@RoundInterval = params['RoundInterval']
@RecoverNotify = params['RecoverNotify']
@NeedSendNotice = params['NeedSendNotice']
@ReceiverGroupList = params['ReceiverGroupList']
@ReceiverUserList = params['ReceiverUserList']
@ReceiveLanguage = params['ReceiveLanguage']
end
end
# SendCustomAlarmMsg请求参数结构体
class SendCustomAlarmMsgRequest < TencentCloud::Common::AbstractModel
# @param Module: 接口模块名，当前取值monitor
# @type Module: String
# @param PolicyId: 消息策略ID，在云监控自定义消息页面配置
# @type PolicyId: String
# @param Msg: 用户想要发送的自定义消息内容
# @type Msg: String
attr_accessor :Module, :PolicyId, :Msg
def initialize(_module=nil, policyid=nil, msg=nil)
@Module = _module
@PolicyId = policyid
@Msg = msg
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
@Msg = params['Msg']
end
end
# SendCustomAlarmMsg返回参数结构体
class SendCustomAlarmMsgResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# Prometheus 服务发现信息
class ServiceDiscoveryItem < TencentCloud::Common::AbstractModel
# @param Name: 服务发现名称
# @type Name: String
# @param Namespace: 服务发现属于的 Namespace
# @type Namespace: String
# @param Kind: 服务发现类型: ServiceMonitor/PodMonitor
# @type Kind: String
# @param NamespaceSelector: Namespace 选取方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NamespaceSelector: String
# @param Selector: Label 选取方式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Selector: String
# @param Endpoints: Endpoints 信息（PodMonitor 不含该参数）
# @type Endpoints: String
# @param Yaml: 服务发现对应的配置信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Yaml: String
attr_accessor :Name, :Namespace, :Kind, :NamespaceSelector, :Selector, :Endpoints, :Yaml
def initialize(name=nil, namespace=nil, kind=nil, namespaceselector=nil, selector=nil, endpoints=nil, yaml=nil)
@Name = name
@Namespace = namespace
@Kind = kind
@NamespaceSelector = namespaceselector
@Selector = selector
@Endpoints = endpoints
@Yaml = yaml
end
def deserialize(params)
@Name = params['Name']
@Namespace = params['Namespace']
@Kind = params['Kind']
@NamespaceSelector = params['NamespaceSelector']
@Selector = params['Selector']
@Endpoints = params['Endpoints']
@Yaml = params['Yaml']
end
end
# SetDefaultAlarmPolicy请求参数结构体
class SetDefaultAlarmPolicyRequest < TencentCloud::Common::AbstractModel
# @param Module: 模块名，固定值 monitor
# @type Module: String
# @param PolicyId: 告警策略 ID
# @type PolicyId: String
attr_accessor :Module, :PolicyId
def initialize(_module=nil, policyid=nil)
@Module = _module
@PolicyId = policyid
end
def deserialize(params)
@Module = params['Module']
@PolicyId = params['PolicyId']
end
end
# SetDefaultAlarmPolicy返回参数结构体
class SetDefaultAlarmPolicyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 策略列表详情标签返回体
class TagInstance < TencentCloud::Common::AbstractModel
# @param Key: 标签Key
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Key: String
# @param Value: 标签Value
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
# @param InstanceSum: 实例个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceSum: Integer
# @param ServiceType: 产品类型，如：cvm
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServiceType: String
# @param RegionId: 地域ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegionId: Integer
# @param BindingStatus: 绑定状态，2：绑定成功，1：绑定中
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BindingStatus: Integer
# @param TagStatus: 标签状态，2：标签存在，1：标签不存在
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagStatus: Integer
attr_accessor :Key, :Value, :InstanceSum, :ServiceType, :RegionId, :BindingStatus, :TagStatus
def initialize(key=nil, value=nil, instancesum=nil, servicetype=nil, regionid=nil, bindingstatus=nil, tagstatus=nil)
@Key = key
@Value = value
@InstanceSum = instancesum
@ServiceType = servicetype
@RegionId = regionid
@BindingStatus = bindingstatus
@TagStatus = tagstatus
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
@InstanceSum = params['InstanceSum']
@ServiceType = params['ServiceType']
@RegionId = params['RegionId']
@BindingStatus = params['BindingStatus']
@TagStatus = params['TagStatus']
end
end
# 模板列表
class TemplateGroup < TencentCloud::Common::AbstractModel
# @param Conditions: 指标告警规则
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Conditions: Array
# @param EventConditions: 事件告警规则
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventConditions: Array
# @param PolicyGroups: 关联告警策略组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PolicyGroups: Array
# @param GroupID: 模板策略组ID
# @type GroupID: Integer
# @param GroupName: 模板策略组名称
# @type GroupName: String
# @param InsertTime: 创建时间
# @type InsertTime: Integer
# @param LastEditUin: 最后修改人UIN
# @type LastEditUin: Integer
# @param Remark: 备注
# @type Remark: String
# @param UpdateTime: 更新时间
# @type UpdateTime: Integer
# @param ViewName: 视图
# @type ViewName: String
# @param IsUnionRule: 是否为与关系
# @type IsUnionRule: Integer
attr_accessor :Conditions, :EventConditions, :PolicyGroups, :GroupID, :GroupName, :InsertTime, :LastEditUin, :Remark, :UpdateTime, :ViewName, :IsUnionRule
def initialize(conditions=nil, eventconditions=nil, policygroups=nil, groupid=nil, groupname=nil, inserttime=nil, lastedituin=nil, remark=nil, updatetime=nil, viewname=nil, isunionrule=nil)
@Conditions = conditions
@EventConditions = eventconditions
@PolicyGroups = policygroups
@GroupID = groupid
@GroupName = groupname
@InsertTime = inserttime
@LastEditUin = lastedituin
@Remark = remark
@UpdateTime = updatetime
@ViewName = viewname
@IsUnionRule = isunionrule
end
def deserialize(params)
unless params['Conditions'].nil?
@Conditions = []
params['Conditions'].each do |i|
condition_tmp = Condition.new
condition_tmp.deserialize(i)
@Conditions << condition_tmp
end
end
unless params['EventConditions'].nil?
@EventConditions = []
params['EventConditions'].each do |i|
eventcondition_tmp = EventCondition.new
eventcondition_tmp.deserialize(i)
@EventConditions << eventcondition_tmp
end
end
unless params['PolicyGroups'].nil?
@PolicyGroups = []
params['PolicyGroups'].each do |i|
policygroup_tmp = PolicyGroup.new
policygroup_tmp.deserialize(i)
@PolicyGroups << policygroup_tmp
end
end
@GroupID = params['GroupID']
@GroupName = params['GroupName']
@InsertTime = params['InsertTime']
@LastEditUin = params['LastEditUin']
@Remark = params['Remark']
@UpdateTime = params['UpdateTime']
@ViewName = params['ViewName']
@IsUnionRule = params['IsUnionRule']
end
end
# 云监控告警通知模板 - 回调通知详情
class URLNotice < TencentCloud::Common::AbstractModel
# @param URL: 回调 url（限长256字符）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type URL: String
# @param IsValid: 是否通过验证 0=否 1=是
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsValid: Integer
# @param ValidationCode: 验证码
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ValidationCode: String
# @param StartTime: 通知开始时间 一天开始的秒数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: Integer
# @param EndTime: 通知结束时间 一天开始的秒数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndTime: Integer
attr_accessor :URL, :IsValid, :ValidationCode, :StartTime, :EndTime
def initialize(url=nil, isvalid=nil, validationcode=nil, starttime=nil, endtime=nil)
@URL = url
@IsValid = isvalid
@ValidationCode = validationcode
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@URL = params['URL']
@IsValid = params['IsValid']
@ValidationCode = params['ValidationCode']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# UnBindingAllPolicyObject请求参数结构体
class UnBindingAllPolicyObjectRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id，如传入 PolicyId 则该字段被忽略可传入任意值如 0
# @type GroupId: Integer
# @param PolicyId: 告警策略ID，使用此字段时 GroupId 会被忽略
# @type PolicyId: String
attr_accessor :Module, :GroupId, :PolicyId
def initialize(_module=nil, groupid=nil, policyid=nil)
@Module = _module
@GroupId = groupid
@PolicyId = policyid
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
@PolicyId = params['PolicyId']
end
end
# UnBindingAllPolicyObject返回参数结构体
class UnBindingAllPolicyObjectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UnBindingPolicyObject请求参数结构体
class UnBindingPolicyObjectRequest < TencentCloud::Common::AbstractModel
# @param Module: 固定值，为"monitor"
# @type Module: String
# @param GroupId: 策略组id，如传入 PolicyId 则该字段被忽略可传入任意值如 0
# @type GroupId: Integer
# @param UniqueId: 待删除对象实例的唯一id列表，UniqueId从调用[获取已绑定对象列表接口](https://cloud.tencent.com/document/api/248/40570)的出参的List中得到
# @type UniqueId: Array
# @param InstanceGroupId: 实例分组id，如果按实例分组删除的话UniqueId参数是无效的
# @type InstanceGroupId: Integer
# @param PolicyId: 告警策略ID，使用此字段时 GroupId 会被忽略
# @type PolicyId: String
attr_accessor :Module, :GroupId, :UniqueId, :InstanceGroupId, :PolicyId
def initialize(_module=nil, groupid=nil, uniqueid=nil, instancegroupid=nil, policyid=nil)
@Module = _module
@GroupId = groupid
@UniqueId = uniqueid
@InstanceGroupId = instancegroupid
@PolicyId = policyid
end
def deserialize(params)
@Module = params['Module']
@GroupId = params['GroupId']
@UniqueId = params['UniqueId']
@InstanceGroupId = params['InstanceGroupId']
@PolicyId = params['PolicyId']
end
end
# UnBindingPolicyObject返回参数结构体
class UnBindingPolicyObjectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateAlertRule请求参数结构体
class UpdateAlertRuleRequest < TencentCloud::Common::AbstractModel
# @param RuleId: Prometheus 报警规则 ID
# @type RuleId: String
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param RuleState: 规则状态码，取值如下：
# <li>1=RuleDeleted</li>
# <li>2=RuleEnabled</li>
# <li>3=RuleDisabled</li>
# 默认状态码为 2 启用。
# @type RuleState: Integer
# @param RuleName: 报警规则名称
# @type RuleName: String
# @param Expr: 报警规则表达式
# @type Expr: String
# @param Duration: 报警规则持续时间
# @type Duration: String
# @param Receivers: 报警规则接收组列表
# @type Receivers: Array
# @param Labels: 报警规则标签列表
# @type Labels: Array
# @param Annotations: 报警规则注释列表。
# 告警对象和告警消息是 Prometheus Rule Annotations 的特殊字段，需要通过 annotations 来传递，对应的 Key 分别为summary/description。
# @type Annotations: Array
# @param Type: 报警策略模板分类
# @type Type: String
attr_accessor :RuleId, :InstanceId, :RuleState, :RuleName, :Expr, :Duration, :Receivers, :Labels, :Annotations, :Type
def initialize(ruleid=nil, instanceid=nil, rulestate=nil, rulename=nil, expr=nil, duration=nil, receivers=nil, labels=nil, annotations=nil, type=nil)
@RuleId = ruleid
@InstanceId = instanceid
@RuleState = rulestate
@RuleName = rulename
@Expr = expr
@Duration = duration
@Receivers = receivers
@Labels = labels
@Annotations = annotations
@Type = type
end
def deserialize(params)
@RuleId = params['RuleId']
@InstanceId = params['InstanceId']
@RuleState = params['RuleState']
@RuleName = params['RuleName']
@Expr = params['Expr']
@Duration = params['Duration']
@Receivers = params['Receivers']
unless params['Labels'].nil?
@Labels = []
params['Labels'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Labels << prometheusrulekv_tmp
end
end
unless params['Annotations'].nil?
@Annotations = []
params['Annotations'].each do |i|
prometheusrulekv_tmp = PrometheusRuleKV.new
prometheusrulekv_tmp.deserialize(i)
@Annotations << prometheusrulekv_tmp
end
end
@Type = params['Type']
end
end
# UpdateAlertRule返回参数结构体
class UpdateAlertRuleResponse < TencentCloud::Common::AbstractModel
# @param RuleId: 规则 ID
# @type RuleId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleId, :RequestId
def initialize(ruleid=nil, requestid=nil)
@RuleId = ruleid
@RequestId = requestid
end
def deserialize(params)
@RuleId = params['RuleId']
@RequestId = params['RequestId']
end
end
# UpdateAlertRuleState请求参数结构体
class UpdateAlertRuleStateRequest < TencentCloud::Common::AbstractModel
# @param RuleIds: 规则 ID 列表
# @type RuleIds: Array
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param RuleState: 规则状态码，取值如下：
# <li>2=RuleEnabled</li>
# <li>3=RuleDisabled</li>
# 默认状态码为 2 启用。
# @type RuleState: Integer
attr_accessor :RuleIds, :InstanceId, :RuleState
def initialize(ruleids=nil, instanceid=nil, rulestate=nil)
@RuleIds = ruleids
@InstanceId = instanceid
@RuleState = rulestate
end
def deserialize(params)
@RuleIds = params['RuleIds']
@InstanceId = params['InstanceId']
@RuleState = params['RuleState']
end
end
# UpdateAlertRuleState返回参数结构体
class UpdateAlertRuleStateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateServiceDiscovery请求参数结构体
class UpdateServiceDiscoveryRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: Prometheus 实例 ID
# @type InstanceId: String
# @param KubeClusterId: <li>类型是 TKE，为对应的腾讯云容器服务集群 ID</li>
# @type KubeClusterId: String
# @param KubeType: 用户 Kubernetes 集群类型：
# <li> 1 = 容器服务集群(TKE) </li>
# @type KubeType: Integer
# @param Type: 服务发现类型，取值如下：
# <li> 1 = ServiceMonitor</li>
# <li> 2 = PodMonitor</li>
# <li> 3 = JobMonitor</li>
# @type Type: Integer
# @param Yaml: 服务发现配置信息
# @type Yaml: String
attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml
def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil)
@InstanceId = instanceid
@KubeClusterId = kubeclusterid
@KubeType = kubetype
@Type = type
@Yaml = yaml
end
def deserialize(params)
@InstanceId = params['InstanceId']
@KubeClusterId = params['KubeClusterId']
@KubeType = params['KubeType']
@Type = params['Type']
@Yaml = params['Yaml']
end
end
# UpdateServiceDiscovery返回参数结构体
class UpdateServiceDiscoveryResponse < TencentCloud::Common::AbstractModel
# @param ServiceDiscovery: 更新成功之后，返回对应服务发现的信息
# @type ServiceDiscovery: :class:`Tencentcloud::Monitor.v20180724.models.ServiceDiscoveryItem`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ServiceDiscovery, :RequestId
def initialize(servicediscovery=nil, requestid=nil)
@ServiceDiscovery = servicediscovery
@RequestId = requestid
end
def deserialize(params)
unless params['ServiceDiscovery'].nil?
@ServiceDiscovery = ServiceDiscoveryItem.new
@ServiceDiscovery.deserialize(params['ServiceDiscovery'])
end
@RequestId = params['RequestId']
end
end
# 云监控告警通知模板 - 用户通知详情
class UserNotice < TencentCloud::Common::AbstractModel
# @param ReceiverType: 接收者类型 USER=用户 GROUP=用户组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReceiverType: String
# @param StartTime: 通知开始时间 00:00:00 开始的秒数（取值范围0-86399）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: Integer
# @param EndTime: 通知结束时间 00:00:00 开始的秒数（取值范围0-86399）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndTime: Integer
# @param NoticeWay: 通知渠道列表 EMAIL=邮件 SMS=短信 CALL=电话 WECHAT=微信 RTX=企业微信
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NoticeWay: Array
# @param UserIds: 用户 uid 列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UserIds: Array
# @param GroupIds: 用户组 group id 列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupIds: Array
# @param PhoneOrder: 电话轮询列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneOrder: Array
# @param PhoneCircleTimes: 电话轮询次数 （取值范围1-5）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleTimes: Integer
# @param PhoneInnerInterval: 单次轮询内拨打间隔 秒数 （取值范围60-900）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneInnerInterval: Integer
# @param PhoneCircleInterval: 两次轮询间隔 秒数（取值范围60-900）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCircleInterval: Integer
# @param NeedPhoneArriveNotice: 是否需要触达通知 0=否 1=是
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NeedPhoneArriveNotice: Integer
# @param PhoneCallType: 电话拨打类型 SYNC=同时拨打 CIRCLE=轮询拨打 不指定时默认是轮询
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhoneCallType: String
attr_accessor :ReceiverType, :StartTime, :EndTime, :NoticeWay, :UserIds, :GroupIds, :PhoneOrder, :PhoneCircleTimes, :PhoneInnerInterval, :PhoneCircleInterval, :NeedPhoneArriveNotice, :PhoneCallType
def initialize(receivertype=nil, starttime=nil, endtime=nil, noticeway=nil, userids=nil, groupids=nil, phoneorder=nil, phonecircletimes=nil, phoneinnerinterval=nil, phonecircleinterval=nil, needphonearrivenotice=nil, phonecalltype=nil)
@ReceiverType = receivertype
@StartTime = starttime
@EndTime = endtime
@NoticeWay = noticeway
@UserIds = userids
@GroupIds = groupids
@PhoneOrder = phoneorder
@PhoneCircleTimes = phonecircletimes
@PhoneInnerInterval = phoneinnerinterval
@PhoneCircleInterval = phonecircleinterval
@NeedPhoneArriveNotice = needphonearrivenotice
@PhoneCallType = phonecalltype
end
def deserialize(params)
@ReceiverType = params['ReceiverType']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@NoticeWay = params['NoticeWay']
@UserIds = params['UserIds']
@GroupIds = params['GroupIds']
@PhoneOrder = params['PhoneOrder']
@PhoneCircleTimes = params['PhoneCircleTimes']
@PhoneInnerInterval = params['PhoneInnerInterval']
@PhoneCircleInterval = params['PhoneCircleInterval']
@NeedPhoneArriveNotice = params['NeedPhoneArriveNotice']
@PhoneCallType = params['PhoneCallType']
end
end
end
end
end