# Custom changes for the College prototype.
# These are changes that are inconsistent with other prototype
# building types.
module College
  def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
    return true
  end

  def model_custom_internal_load_tweaks(building_type, climate_zone, prototype_input, model)
    #   SpaceInfiltration "Peak: 0.2016 cfm/sf of above grade exterior wall surface area, adjusted by wind (when fans turn off)
    # Off Peak: 25% of peak infiltration rate (when fans turn on)
    # Additional infiltration through building entrance"
    infil_schedule = model.getScheduleRulesetByName("College INFIL_SCH_PNNL")
    model.getSpaceTypes.sort.each do |space_type|
      infil_flow_rates = space_type.getSpaceInfiltrationDesignFlowRates
      if infil_flow_rates.empty?
        # create a new infiltration object for the spacetypes without any infiltration defined
        infil_flow_rate = Openstudio::Model::getSpaceInfiltrationDesignFlowRate.new(model)
        infil_flow_rate.setSpaceInfiltrationDesignFlowRate(0.2016)
        infil_flow_rate.setSchedule(infil_schedule)
        infil_flow_rate.setSpaceType(space_type)
      else
        infil_flow_rates.each do |rate|
          rate.setSpaceInfiltrationDesignFlowRate(0.2016)
          rate.setSchedule(infil_schedule)
        end
      end
    end

    building_entrance_lobby = model.getSpaceByName('CB_ Entrance Lobby_F0')
    lobby_door_leakage_area = Openstudio::Model::getSpaceInfiltrationEffectiveLeakageArea.new(model)
    lobby_door_leakage_area.setEffectiveAirLeakageArea(5.0) # Need modification
    lobby_door_leakage_area.setSpace(building_entrance_lobby)

    # Plugload:Average power density (W/ft2) See under Zone Summary (MISSING)
    # Schedule See under Schedules
    # Zone Control Type: minimum supply air at 30% of the zone design peak supply air
  end

  def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
    return true
  end

  def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
    return true
  end
end