/* -*- Mode: C; tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- */ /* * Copyright 2012 Couchbase, Inc. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** * @file * @brief * Definition of all of the error codes used by libcouchbase */ #ifndef LIBCOUCHBASE_ERROR_H #define LIBCOUCHBASE_ERROR_H 1 #ifndef LIBCOUCHBASE_COUCHBASE_H #error "Include libcouchbase/couchbase.h instead" #endif /** * @ingroup lcb-public-api * @defgroup lcb-error-codes Error Codes * @brief Status codes returned by the library * * @addtogroup lcb-error-codes * @{ */ #ifdef __cplusplus extern "C" { #endif /** * @brief Error Categories * * These error categories are assigned as a series of OR'd bits to each * of the error codes in lcb_error_t. * * @see lcb_get_errtype */ typedef enum { /** Error type indicating a likely issue in user input */ LCB_ERRTYPE_INPUT = 1 << 0, /** Error type indicating a likely network failure */ LCB_ERRTYPE_NETWORK = 1 << 1, /** Error type indicating a fatal condition within the server or library */ LCB_ERRTYPE_FATAL = 1 << 2, /** Error type indicating a transient condition within the server */ LCB_ERRTYPE_TRANSIENT = 1 << 3, /** Error type indicating a negative server reply for the data */ LCB_ERRTYPE_DATAOP = 1 << 4, /** Error codes which should never be visible to the user */ LCB_ERRTYPE_INTERNAL = 1 << 5, /** Error code indicating a plugin failure */ LCB_ERRTYPE_PLUGIN = 1 << 6, /** Error code indicating the server is under load */ LCB_ERRTYPE_SRVLOAD = 1 << 7, /** Error code indicating the server generated this message */ LCB_ERRTYPE_SRVGEN = 1 << 8, /** * Error code indicates document (fulldoc) access ok, but * error in performing subdocument operation. Note that this only * covers errors which relate to a specific operation, rather than * operations which prevent _any_ subdoc operation from executing. */ LCB_ERRTYPE_SUBDOC = 1 << 9 } lcb_errflags_t; /* PRIVATE. This is just here to instruct/inform users to use the more detailed codes */ #define LCB__ERR_USEDETAILS \ "Enable detailed error codes (via LCB_CNTL_DETAILED_ERRCODES, or via " \ "`detailed_errcodes` in the connection string) and/or enable logging to " \ "get more information" /** * @brief XMacro for all error types * @param X macro to be invoked for each function. This will accept the following * arguments: * - Raw unquoted literal error identifier (e.g. `LCB_EINVAL`) * - Code for the error (e.g. `0x23`) * - Set of categories for the specific error (e.g. `LCB_ERRTYPE_FOO|LCB_ERRTYPE_BAR`) * - Quoted string literal describing the error (e.g. `"This is sad"`) */ #define LCB_XERR(X) \ /** Success */ \ X(LCB_SUCCESS, 0x00, 0, "Success (Not an error)") \ \ X(LCB_AUTH_CONTINUE, 0x01, LCB_ERRTYPE_INTERNAL|LCB_ERRTYPE_FATAL|LCB_ERRTYPE_SRVGEN, \ "Error code used internally within libcouchbase for SASL auth. Should " \ "not be visible from the API") \ \ /**This error code is received in callbacks when connecting or reconnecting to the cluster. If received during initial bootstrap (i.e. lcb_get_bootstrap_status()) then it should be considered a fatal errror. This error should not be visible after initial bootstrap. This error may also be received if CCCP bootstrap is used and the bucket does not exist.*/ \ X(LCB_AUTH_ERROR, 0x02, LCB_ERRTYPE_FATAL|LCB_ERRTYPE_INPUT, \ "Authentication failed. You may have provided an invalid " \ "username/password combination") \ \ /**This error is received in callbacks. It is a result of trying to perform an lcb_arithmetic() operation on an item which has an existing value that cannot be parsed as a number. */ \ X(LCB_DELTA_BADVAL, 0x03, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "The value requested to be incremented is not stored as a number") \ \ /**This error is received in callbacks. It indicates that the key and value exceeded the constraints within the server. The current constraints are 150 bytes for a key and 20MB for a value */ \ X(LCB_E2BIG, 0x04, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "The object requested is too big to store in the server") \ \ X(LCB_EBUSY, 0x05, LCB_ERRTYPE_TRANSIENT, "The server is busy. Try again later") \ /**Internal error within the library. This may be a result of a bug */ \ X(LCB_EINTERNAL, 0x06, LCB_ERRTYPE_INTERNAL, "Internal libcouchbase error") \ \ /**If returned from an API call, it indicates invalid values were passed to the function. If received within a callback, it indicates that a malformed packet was sent to the server. */ \ X(LCB_EINVAL, 0x07, LCB_ERRTYPE_INPUT, "Invalid input/arguments") \ \ /**This code is received in callbacks. It means the server has no more memory left to store or modify the item. */ \ X(LCB_ENOMEM, 0x08, LCB_ERRTYPE_TRANSIENT, \ "The server is out of memory. Try again later") \ \ X(LCB_ERANGE, 0x09, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "Invalid range") \ \ /**Generic error */ \ X(LCB_ERROR, 0x0A, 0, "Generic error") \ \ /**This error is received in callbacks from the server itself to indicate that it could not perform the requested operation. This is usually due to memory and/or resource constraints on the server. This error may also be returned if a key has been locked (see lcb_get()) and an operation has been performed on it without unlocking the item (see lcb_unlock(), or pass the correct CAS value to a mutation function). */ \ X(LCB_ETMPFAIL, 0x0B, LCB_ERRTYPE_TRANSIENT|LCB_ERRTYPE_SRVLOAD|LCB_ERRTYPE_SRVGEN, \ "Temporary failure received from server. Try again later") \ \ /**The key already exists in the cluster. This error code is received within callbacks as a result of an _add_ operation in which the key already exists. It is also received for other operations in which a CAS was specified but has changed on the server. */ \ X(LCB_KEY_EEXISTS, 0x0C, LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "The key already exists in the server. If you have supplied a CAS then " \ "the key exists with a CAS value different than specified") \ \ /**Received in callbacks to indicate that the server does not contain the item */ \ X(LCB_KEY_ENOENT, 0x0D, LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "The key does not exist on the server") \ \ /**Error code thrown if an I/O plugin could not be located */ \ X(LCB_DLOPEN_FAILED, 0x0E, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL|LCB_ERRTYPE_PLUGIN, \ "Could not locate plugin library") \ \ /**Error code thrown of an I/O plugin did not contain a proper initialization routine */ \ X(LCB_DLSYM_FAILED, 0x0F, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL|LCB_ERRTYPE_PLUGIN, \ "Required plugin initializer not found") \ \ /** This is a generic error code returned for various forms of socket operation failures. Newer applications are recommended to enable the @ref LCB_CNTL_DETAILED_ERRCODES setting via lcb_cntl() and receive more detailed information about a socket error. @see lcb_cntl(), @ref LCB_CNTL_DETAILED_ERRCODES */ \ X(LCB_NETWORK_ERROR, 0x10, LCB_ERRTYPE_NETWORK, \ "Generic network failure. " LCB__ERR_USEDETAILS) \ \ /**Error code received in callbacks if the command was forwarded to the wrong server (for example, during a rebalance) and the library settings are configured that the command should not be remapped to a new server */ \ X(LCB_NOT_MY_VBUCKET, 0x11, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT|LCB_ERRTYPE_SRVGEN, \ "The server which received this command claims it is not hosting this key") \ \ /**Received in callbacks as a response to an LCB_APPEND or LCB_PREPEND on an item that did not exist in the cluster. Equivalent to LCB_KEY_ENOENT */ \ X(LCB_NOT_STORED, 0x12, LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN, \ "Item not stored (did you try to append/prepend to a missing key?)") \ \ /**Returned from API calls if a specific operation is valid but is unsupported in the current version or state of the library. May also be received in a callback if the cluster does not support the operation. This will be returned for unknown settings passed to lcb_cntl() unless @ref LCB_CNTL_DETAILED_ERRCODES is set */ \ X(LCB_NOT_SUPPORTED, 0x13, 0, "Operation not supported") \ \ /**Received in callbacks if the cluster does not know about the command. Similar to LCB_NOT_SUPPORTED */ \ X(LCB_UNKNOWN_COMMAND, 0x14, LCB_ERRTYPE_SRVGEN, "Unknown command") \ \ /**Error code received if the hostname specified could not be found. It may also be received if a socket could not be created to the host supplied. A more detailed error code may be returned instead if @ref LCB_CNTL_DETAILED_ERRCODES is set.*/ \ X(LCB_UNKNOWN_HOST, 0x15, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_INPUT, \ "DNS/Hostname lookup failed") \ \ /**Error code received if the server replied with an unexpected response */ \ X(LCB_PROTOCOL_ERROR, 0x16, LCB_ERRTYPE_NETWORK, \ "Data received on socket was not in the expected format") \ \ /**Error code received in callbacks for operations which did not receive a reply from the server within the timeout limit. @see LCB_CNTL_OP_TIMEOUT */ \ X(LCB_ETIMEDOUT, 0x17, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "Client-Side timeout exceeded for operation. Inspect network conditions " \ "or increase the timeout") \ \ /** @see LCB_NETWORK_ERROR, LCB_UNKNOWN_HOST, @ref LCB_CNTL_DETAILED_ERRCODES */ \ X(LCB_CONNECT_ERROR, 0x18, LCB_ERRTYPE_NETWORK, \ "Error while establishing TCP connection. " LCB__ERR_USEDETAILS) \ \ /** Received on initial bootstrap if the bucket does not exist. Note that for CCCP bootstrap, @ref LCB_AUTH_ERROR will be received instead */ \ X(LCB_BUCKET_ENOENT, 0x19, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL, \ "The bucket requested does not exist") \ \ /** Client could not allocate memory for internal structures */ \ X(LCB_CLIENT_ENOMEM, 0x1A, LCB_ERRTYPE_FATAL, \ "Memory allocation for libcouchbase failed. Severe problems ahead") \ \ /** Client could not schedule the request. This is typically received when an operation is requested before the initial bootstrap has completed */ \ X(LCB_CLIENT_ENOCONF, 0x1B, LCB_ERRTYPE_TRANSIENT, \ "Client not bootstrapped. Ensure bootstrap/connect was attempted and was successful") \ \ X(LCB_EBADHANDLE, 0x1C, LCB_ERRTYPE_INPUT, \ "Bad handle type for operation. " \ "You cannot perform administrative operations on a data handle, or data "\ "operations on a cluster handle") \ \ X(LCB_SERVER_BUG, 0x1D, 0, "Encountered a server bug") \ \ X(LCB_PLUGIN_VERSION_MISMATCH, 0x1E, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL|LCB_ERRTYPE_PLUGIN, \ "This version of libcouchbase cannot load the specified plugin") \ \ X(LCB_INVALID_HOST_FORMAT, 0x1F, LCB_ERRTYPE_INPUT, \ "Hostname specified for URI is in an invalid format") \ \ X(LCB_INVALID_CHAR, 0x20, LCB_ERRTYPE_INPUT, "Illegal characted") \ \ /** Received in response to the durability API call, if the amount of nodes or replicas to persist/replicate to exceed the total number of replicas the bucket was configured with. */ \ X(LCB_DURABILITY_ETOOMANY, 0x21, LCB_ERRTYPE_INPUT, \ "Durability constraints requires more nodes/replicas than the cluster "\ "configuration allows. Durability constraints will never be satisfied") \ \ /** Received in scheduling if a command with the same key was specified more than once. Some commands will accept this, but others (notably `observe`) will not */ \ X(LCB_DUPLICATE_COMMANDS, 0x22, LCB_ERRTYPE_INPUT, \ "The same key was specified more than once in the command list") \ \ /** This error is received from API calls if the master node for the vBucket the key has been hashed to is not present. This will happen in the result of a node failover where no replica exists to replace it. */ \ X(LCB_NO_MATCHING_SERVER, 0x23, LCB_ERRTYPE_TRANSIENT, \ "The node the request was mapped to does not exist in the current cluster " \ "map. This may be the result of a failover.") \ \ /** Received during initial creation (lcb_create()) if an environment variable was specified with an incorrect or invalid value. @see @ref lcb-env-vars-page */ \ X(LCB_BAD_ENVIRONMENT, 0x24, LCB_ERRTYPE_FATAL|LCB_ERRTYPE_INPUT, \ "The value for an environment variable recognized by libcouchbase was " \ "specified in an incorrect format. Check your environment for entries " \ "starting with 'LCB_' or 'LIBCOUCHBASE_'") \ \ X(LCB_BUSY, 0x25, LCB_ERRTYPE_INTERNAL, "Busy. This is an internal error") \ \ /** Received from lcb_create() if the username does not match the bucket */ \ X(LCB_INVALID_USERNAME, 0x26, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL, \ "The username must match the bucket name (or be NULL) for data access") \ \ X(LCB_CONFIG_CACHE_INVALID, 0x27, LCB_ERRTYPE_INPUT, \ "The contents of the configuration cache file were invalid. Configuration " \ "will be fetched from the network") \ \ /** Received during initial bootstrap if the library was configured to force the usage of a specific SASL mechanism and the server did not support this mechanism. @see LCB_CNTL_FORCE_SASL_MECH */ \ X(LCB_SASLMECH_UNAVAILABLE, 0x28, LCB_ERRTYPE_INPUT|LCB_ERRTYPE_FATAL, \ "The requested SASL mechanism was not supported by the server. Either " \ "upgrade the server or change the mechanism requirements") \ \ /** Received in the HTTP callback if the response was redirected too many times. @see LCB_CNTL_MAX_REDIRECTS */ \ X(LCB_TOO_MANY_REDIRECTS, 0x29, LCB_ERRTYPE_NETWORK, \ "Maximum allowed number of redirects reached. See lcb_cntl and the "\ "LCB_CNTL_MAX_REDIRECTS option to modify this limit") \ \ /** May be received in operation callbacks if the cluster toplogy changed and the library could not remap the command to a new node. This may be because the internal structure lacked sufficient information to recreate the packet, or because the configuration settings indicated that the command should not be retried. @see LCB_CNTL_RETRYMODE */ \ X(LCB_MAP_CHANGED, 0x2A, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "The cluster map has changed and this operation could not be completed " \ "or retried internally. Try this operation again") \ \ /** Returned from the lcb_pktfwd3() function if an incomplete packet was passed */ \ X(LCB_INCOMPLETE_PACKET, 0x2B, LCB_ERRTYPE_TRANSIENT|LCB_ERRTYPE_INPUT, \ "Incomplete packet was passed to forward function") \ \ /** Mapped directly to the system `ECONNREFUSED` errno. This is received in callbacks if an initial connection to the node could not be established. Check your firewall settings and ensure the specified service is online. */ \ X(LCB_ECONNREFUSED, 0x2C, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "The remote host refused the connection. Is the service up?") \ \ /** Returned in a callback if the socket connection was gracefully closed, but the library wasn't expecting it. This may happen if the system is being shut down. @lcb_see_detailed_neterr */ \ X(LCB_ESOCKSHUTDOWN, 0x2D, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "The remote host closed the connection") \ \ /** Returned in a callback if the socket connection was forcefully reset, Equivalent to the system `ECONNRESET`. @lcb_see_detailed_neterr */ \ X(LCB_ECONNRESET, 0x2E, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "The connection was forcibly reset by the remote host") \ \ /** Returned in a callback if the library could not allocated a local socket due to TCP local port exhaustion. This means you have either found a bug in the library or are creating too many TCP connections. Keep in mind that a TCP connection will still occupy a slot in your system socket table even after it has been closed (and will thus appear in a `TIME_WAIT` state). @lcb_see_detailed_neterr */ \ X(LCB_ECANTGETPORT, 0x2F, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_FATAL, \ "Could not assign a local port for this socket. For client sockets this means " \ "there are too many TCP sockets open") \ \ /** Returned if the library could not allocate a new file descriptor for a socket or other resource. This may be more common on systems (such as Mac OS X) which have relatively low limits for file descriptors. To raise the file descriptor limit, refer to the `ulimit -n` command @lcb_see_detailed_neterr */ \ X(LCB_EFDLIMITREACHED, 0x30, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_FATAL, \ "The system or process has reached its maximum number of file descriptors") \ \ /** Returned in callback if the host or subnet containing a node could not be contacted. This may be a result of a bad routing table or being physically disconnected from the network. @lcb_see_detailed_neterr. */ \ X(LCB_ENETUNREACH, 0x31, LCB_ERRTYPE_NETWORK|LCB_ERRTYPE_TRANSIENT, \ "The remote host was unreachable - is your network OK?") \ \ /** An unrecognized setting was passed to the lcb_cntl() function @lcb_see_detailed_neterr */ \ X(LCB_ECTL_UNKNOWN, 0x32, LCB_ERRTYPE_INPUT, \ "Control code passed was unrecognized") \ \ /** An invalid operation was supplied for a setting to lcb_cntl(). This will happen if you try to write to a read-only setting, or retrieve a value which may only be set. Refer to the documentation for an individual setting to see what modes it supports. @lcb_see_detailed_neterr */ \ X(LCB_ECTL_UNSUPPMODE, 0x33, LCB_ERRTYPE_INPUT, \ "Invalid modifier for cntl operation (e.g. tried to read a write-only value") \ \ /** A malformed argument was passed to lcb_cntl() for the given setting. See the documentation for the setting to see what arguments it supports and how they are to be supplied. @lcb_see_detailed_neterr */ \ X(LCB_ECTL_BADARG, 0x34, LCB_ERRTYPE_INPUT, \ "Argument passed to cntl was badly formatted") \ \ /**An empty key was passed to an operation. Most commands do not accept empty keys. */ \ X(LCB_EMPTY_KEY, 0x35, LCB_ERRTYPE_INPUT, \ "An empty key was passed to an operation") \ \ /** A problem with the SSL system was encountered. Use logging to discover what happened. This error will only be thrown if something internal to the SSL library failed (for example, a bad certificate or bad user input); otherwise a network error will be thrown if an SSL connection was terminated */ \ X(LCB_SSL_ERROR, 0x36, LCB_ERRTYPE_FATAL, \ "A generic error related to the SSL subsystem was encountered. Enable logging " \ "to see more details") \ \ /** The certificate the server sent cannot be verified. This is a possible case of a man-in-the-middle attack, but also of forgetting to supply the path to the CA authority to the library. */ \ X(LCB_SSL_CANTVERIFY, 0x37, LCB_ERRTYPE_FATAL, \ "Client could not verify server's certificate") \ \ X(LCB_SCHEDFAIL_INTERNAL, 0x38, 0, \ "Internal error used for destroying unscheduled command data") \ \ /** An optional client feature was requested, but the current configuration does not allow it to be used. This might be because it is not available on a particular platform/architecture/operating system/configuration, or it has been disabled at the time the library was built. */ \ X(LCB_CLIENT_FEATURE_UNAVAILABLE, 0x39, LCB_ERRTYPE_INPUT, \ "The requested feature is not supported by the client, either because of " \ "settings in the configured instance, or because of options disabled at " \ "the time the library was compiled") \ \ /**An option was passed to a command which is incompatible with other options. This may happen if two fields are mutually exclusive */ \ X(LCB_OPTIONS_CONFLICT, 0x3A, LCB_ERRTYPE_INPUT, \ "The operation structure contains conflicting options") \ \ /**Received in callbacks if an operation failed because of a negative HTTP status code */ \ X(LCB_HTTP_ERROR, 0x3B, 0, \ "HTTP Operation failed. Inspect status code for details") \ \ /**Scheduling error received if @ref LCB_CNTL_DURABILITY_MUTATION_TOKENS was enabled, but there is no available mutation token for the key. */ \ X(LCB_DURABILITY_NO_MUTATION_TOKENS, 0x3C, LCB_ERRTYPE_INPUT, \ "The given item does not have a mutation token associated with it. " \ "this is either because fetching mutation tokens was not enabled, or " \ "you are trying to check on something not stored by this instance") \ \ /** The server replied with an unrecognized status code */ \ X(LCB_UNKNOWN_MEMCACHED_ERROR, 0x3D, LCB_ERRTYPE_SRVGEN, \ "The server replied with an unrecognized status code. A newer version " \ "of this library may be able to decode it") \ \ /** The server replied that the given mutation has been lost */ \ X(LCB_MUTATION_LOST, 0x3E, LCB_ERRTYPE_SRVGEN,\ "The given mutation has been permanently lost due to the node failing " \ "before replication") \ X(LCB_SUBDOC_PATH_ENOENT, 0x3F, \ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Sub-document path does not exist") \ X(LCB_SUBDOC_PATH_MISMATCH, 0x40,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Type of element in sub-document path conflicts with type in document") \ X(LCB_SUBDOC_PATH_EINVAL, 0x41, \ LCB_ERRTYPE_INPUT|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Malformed sub-document path") \ X(LCB_SUBDOC_PATH_E2BIG, 0x42, \ LCB_ERRTYPE_INPUT|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Sub-document contains too many components") \ X(LCB_SUBDOC_DOC_E2DEEP, 0x43,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Existing document contains too many levels of nesting") \ X(LCB_SUBDOC_VALUE_CANTINSERT, 0x44, \ LCB_ERRTYPE_INPUT|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Subdocument operation would invalidate the JSON") \ X(LCB_SUBDOC_DOC_NOTJSON, 0x45,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Existing document is not valid JSON") \ X(LCB_SUBDOC_NUM_ERANGE, 0x46, \ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "The existing numeric value is too large") \ X(LCB_SUBDOC_BAD_DELTA, 0x47,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Delta must be numeric, within the 64 bit signed range, and non-zero") \ X(LCB_SUBDOC_PATH_EEXISTS, 0x48,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "The given path already exists in the document") \ X(LCB_SUBDOC_MULTI_FAILURE, 0x49,\ LCB_ERRTYPE_DATAOP|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Could not execute one or more multi lookups or mutations") \ X(LCB_SUBDOC_VALUE_E2DEEP, 0x4A,\ LCB_ERRTYPE_INPUT|LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_SUBDOC, \ "Value is too deep to insert") \ X(LCB_EINVAL_MCD, 0x4B, LCB_ERRTYPE_SRVGEN|LCB_ERRTYPE_INTERNAL, \ "A badly formatted packet was sent to the server. Please report this in a bug") \ X(LCB_EMPTY_PATH, 0x4C, LCB_ERRTYPE_INPUT, "Missing subdocument path") \ X(LCB_UNKNOWN_SDCMD, 0x4D, LCB_ERRTYPE_INPUT, "Unknown subdocument command") \ X(LCB_ENO_COMMANDS, 0x4E, LCB_ERRTYPE_INPUT, "No commands specified") \ X(LCB_QUERY_ERROR, 0x4F, LCB_ERRTYPE_SRVGEN, \ "Query execution failed. Inspect raw response object for information") /** Error codes returned by the library. */ typedef enum { #define X(n, v, cls, s) n = v, LCB_XERR(X) #undef X #ifdef LIBCOUCHBASE_INTERNAL /** * This is a private value used by the tests in libcouchbase */ LCB_MAX_ERROR_VAL, #endif /* The errors below this value reserver for libcouchbase usage. */ LCB_MAX_ERROR = 0x1000 } lcb_error_t; /** @deprecated. Use new, less ambiguous identifier (@ref LCB_CLIENT_ENOCONF) */ #define LCB_CLIENT_ETMPFAIL LCB_CLIENT_ENOCONF /** @brief If the error is a result of bad input */ #define LCB_EIFINPUT(e) (lcb_get_errtype(e) & LCB_ERRTYPE_INPUT) /** @brief if the error is a result of a network condition */ #define LCB_EIFNET(e) (lcb_get_errtype(e) & LCB_ERRTYPE_NETWORK) /** @brief if the error is fatal */ #define LCB_EIFFATAL(e) (lcb_get_errtype(e) & LCB_ERRTYPE_FATAL) /** @brief if the error is transient */ #define LCB_EIFTMP(e) (lcb_get_errtype(e) & LCB_ERRTYPE_TRANSIENT) /** @brief if the error is a routine negative server reply */ #define LCB_EIFDATA(e) (lcb_get_errtype(e) & LCB_ERRTYPE_DATAOP) /** @brief if the error is a result of a plugin implementation */ #define LCB_EIFPLUGIN(e) (lcb_get_errtype(e) & LCB_ERRTYPE_PLUGIN) #define LCB_EIFSRVLOAD(e) (lcb_get_errtype(e) & LCB_ERRTYPE_SRVLOAD) #define LCB_EIFSRVGEN(e) (lcb_get_errtype(e) & LCB_ERRTYPE_SRVGEN) #define LCB_EIFSUBDOC(e) (lcb_get_errtype(e) & LCB_ERRTYPE_SUBDOC) /** * @brief Get error categories for a specific code * @param err the error received * @return a set of flags containing the categories for the given error * @committed */ LIBCOUCHBASE_API int lcb_get_errtype(lcb_error_t err); /** * Get a textual descrtiption for the given error code * @param instance the instance the error code belongs to (you might * want different localizations for the different instances) * @param error the error code * @return A textual description of the error message. The caller should * not release the memory returned from this function. * @committed */ LIBCOUCHBASE_API const char *lcb_strerror(lcb_t instance, lcb_error_t error); /** * This may be used in conjunction with the errmap callback if it wishes * to fallback for default behavior for the given code. * @uncomitted */ LIBCOUCHBASE_API lcb_error_t lcb_errmap_default(lcb_t instance, lcb_U16 code); /** * Callback for error mappings. This will be invoked when requesting whether * the user has a possible mapping for this error code. * * This will be called for response codes which may be ambiguous in most * use cases, or in cases where detailed response codes may be mapped to * more generic ones. */ typedef lcb_error_t (*lcb_errmap_callback)(lcb_t instance, lcb_U16 bincode); /**@uncommitted*/ LIBCOUCHBASE_API lcb_errmap_callback lcb_set_errmap_callback(lcb_t, lcb_errmap_callback); #ifdef __cplusplus } #endif /**@}*/ #endif