# encoding: utf-8
#
# table.rb: Table drawing functionality.
#
# Copyright December 2009, Brad Ediger. All rights reserved.
#
# This is free software. Please see the LICENSE and COPYING files for details.

require 'prawn/table/cells'
require 'prawn/table/cell'
require 'prawn/table/cell/in_table'
require 'prawn/table/cell/text'
require 'prawn/table/cell/subtable'

module Prawn

  class Document
    
    # Set up and draw a table on this document. A block can be given, which will
    # be run after cell setup but before layout and drawing.
    #
    # See the documentation on Prawn::Table for details on the arguments.
    #
    def table(data, options={}, &block)
      t = Table.new(data, self, options, &block)
      t.draw
      t
    end

    # Set up, but do not draw, a table. Useful for creating subtables to be
    # inserted into another Table. Call +draw+ on the resulting Table to ink it.
    #
    # See the documentation on Prawn::Table for details on the arguments.
    #
    def make_table(data, options={}, &block)
      Table.new(data, self, options, &block)
    end

  end

  # Next-generation table drawing for Prawn.
  #
  # = Data
  #
  # Data, for a Prawn table, is a two-dimensional array of objects that can be
  # converted to cells ("cellable" objects). Cellable objects can be:
  #
  # String::
  #   Produces a text cell. This is the most common usage.
  # Prawn::Table::Cell::
  #   If you have already built a Cell or have a custom subclass of Cell you
  #   want to use in a table, you can pass through Cell objects. 
  # Prawn::Table::
  #   Creates a subtable (a table within a cell). You can use
  #   Prawn::Document#make_table to create a table for use as a subtable
  #   without immediately drawing it. See examples/table/bill.rb for a
  #   somewhat complex use of subtables.
  # Array::
  #   Creates a simple subtable. Create a Table object using make_table (see
  #   above) if you need more control over the subtable's styling.
  #
  # = Options
  #
  # Prawn/Layout provides many options to control style and layout of your
  # table. These options are implemented with a uniform interface: the +:foo+
  # option always sets the +foo=+ accessor. See the accessor and method
  # documentation for full details on the options you can pass. Some
  # highlights:
  #
  # +cell_style+::
  #   A hash of style options to style all cells. See the documentation on
  #   Prawn::Table::Cell for all cell style options.
  # +header+::
  #   If set to +true+, the first row will be repeated on every page. The
  #   header must be included as the first row of your data. Row numbering
  #   (for styling and other row-specific options) always indexes based on
  #   your data array. Whether or not you have a header, row(n) always refers
  #   to the nth element (starting from 0) of the +data+ array.
  # +column_widths+:: 
  #   Sets widths for individual columns. Manually setting widths can give
  #   better results than letting Prawn guess at them, as Prawn's algorithm
  #   for defaulting widths is currently pretty boneheaded. If you experience
  #   problems like weird column widths or CannotFit errors, try manually
  #   setting widths on more columns.
  #
  # = Initializer Block
  #
  # If a block is passed to methods that initialize a table
  # (Prawn::Table.new, Prawn::Document#table, Prawn::Document#make_table), it
  # will be called after cell setup but before layout. This is a very flexible
  # way to specify styling and layout constraints. This code sets up a table
  # where the second through the fourth rows (1-3, indexed from 0) are each one
  # inch (72 pt) wide:
  #
  #   pdf.table(data) do |table|
  #     table.rows(1..3).width = 72
  #   end
  # 
  # As with Prawn::Document#initialize, if the block has no arguments, it will
  # be evaluated in the context of the object itself. The above code could be
  # rewritten as:
  #
  #   pdf.table(data) do
  #     rows(1..3).width = 72
  #   end
  #
  class Table  

    # Set up a table on the given document. Arguments:
    #
    # +data+::
    #   A two-dimensional array of cell-like objects. See the "Data" section
    #   above for the types of objects that can be put in a table.
    # +document+::
    #   The Prawn::Document instance on which to draw the table.
    # +options+::
    #   A hash of attributes and values for the table. See the "Options" block
    #   above for details on available options.
    #
    def initialize(data, document, options={}, &block)
      @pdf = document
      @cells = make_cells(data)
      @header = false
      options.each { |k, v| send("#{k}=", v) }

      if block
        block.arity < 1 ? instance_eval(&block) : block[self]
      end

      set_column_widths
      set_row_heights
      position_cells
    end                                        

    # Number of rows in the table.
    #
    attr_reader :row_length

    # Number of columns in the table.
    #
    attr_reader :column_length

    # Manually set the width of the table.
    #
    attr_writer :width

    # Returns the width of the table in PDF points.
    #
    def width
      @width ||= [natural_width, @pdf.bounds.width].min
    end

    # Sets column widths for the table. The argument can be one of the following
    # types:
    #
    # +Array+:: 
    #   <tt>[w0, w1, w2, ...]</tt> (specify a width for each column)
    # +Hash+:: 
    #   <tt>{0 => w0, 1 => w1, ...}</tt> (keys are column names, values are
    #   widths)
    # +Numeric+::
    #   +72+ (sets width for all columns)
    #
    def column_widths=(widths)
      case widths
      when Array
        widths.each_with_index { |w, i| column(i).width = w }
      when Hash
        widths.each { |i, w| column(i).width = w }
      when Numeric
        columns.width = widths
      else
        raise ArgumentError, "cannot interpret column widths"
      end
    end

    # Returns the height of the table in PDF points.
    #
    def height
      cells.height
    end

    # If +true+, designates the first row as a header row to be repeated on
    # every page. Does not change row numbering -- row numbers always index into
    # the data array provided, with no modification.
    #
    attr_writer :header

    # Accepts an Array of alternating row colors to stripe the table.
    #
    attr_writer :row_colors

    # Sets styles for all cells.
    #
    #   pdf.table(data, :cell_style => { :borders => [:left, :right] })
    #
    def cell_style=(style_hash)
      cells.style(style_hash)
    end

    # Allows generic stylable content. This is an alternate syntax that some
    # prefer to the attribute-based syntax. This code using style:
    #
    #   pdf.table(data) do
    #     style(row(0), :background_color => 'ff00ff')
    #     style(column(0)) { |c| c.border_width += 1 }
    #   end
    #
    # is equivalent to:
    #
    #   pdf.table(data) do
    #     row(0).style :background_color => 'ff00ff'
    #     column(0).style { |c| c.border_width += 1 }
    #   end
    #
    def style(stylable, style_hash={}, &block)
      stylable.style(style_hash, &block)
    end

    # Draws the table onto the document at the document's current y-position.
    #
    def draw
      # The cell y-positions are based on an infinitely long canvas. The offset
      # keeps track of how much we have to add to the original, theoretical
      # y-position to get to the actual position on the current page.
      offset = @pdf.y

      # Reference bounds are the non-stretchy bounds used to decide when to
      # flow to a new column / page.
      ref_bounds = @pdf.bounds.stretchy? ? @pdf.margin_box : @pdf.bounds

      last_y = @pdf.y

      # Determine whether we're at the top of the current bounds (margin box or
      # bounding box). If we're at the top, we couldn't gain any more room by
      # breaking to the next page -- this means, in particular, that if the
      # first row is taller than the margin box, we will only move to the next
      # page if we're below the top. Some floating-point tolerance is added to
      # the calculation.
      #
      # Note that we use the actual bounds, not the reference bounds. This is
      # because even if we are in a stretchy bounding box, flowing to the next
      # page will not buy us any space if we are at the top.
      if @pdf.y > @pdf.bounds.height + @pdf.bounds.absolute_bottom - 0.001
        # we're at the top of our bounds
        started_new_page_at_row = 0
      else
        started_new_page_at_row = -1

        # If there isn't enough room left on the page to fit the first data row
        # (excluding the header), start the table on the next page.
        needed_height = row(0).height
        needed_height += row(1).height if @header
        if needed_height > @pdf.y - ref_bounds.absolute_bottom
          @pdf.bounds.move_past_bottom
          offset = @pdf.y
          started_new_page_at_row = 0
        end
      end

      @cells.each do |cell|
        if cell.height > (cell.y + offset) - ref_bounds.absolute_bottom &&
           cell.row > started_new_page_at_row
          # start a new page or column
          @pdf.bounds.move_past_bottom
          draw_header unless cell.row == 0
          offset = @pdf.y - cell.y
          started_new_page_at_row = cell.row
        end
 
        # Don't modify cell.x / cell.y here, as we want to reuse the original
        # values when re-inking the table. #draw should be able to be called
        # multiple times.
        x, y = cell.x, cell.y
        y += offset 

        # Translate coordinates to the bounds we are in, since drawing is 
        # relative to the cursor, not ref_bounds.
        x += @pdf.bounds.left_side - @pdf.bounds.absolute_left
        y -= @pdf.bounds.absolute_bottom

        # Set background color, if any.
        if @row_colors && (!@header || cell.row > 0)
          index = @header ? (cell.row - 1) : cell.row
          cell.background_color = @row_colors[index % @row_colors.length]
        end

        cell.draw([x, y])
        last_y = y
      end

      @pdf.move_cursor_to(last_y - @cells.last.height)
    end

    # Calculate and return the constrained column widths, taking into account
    # each cell's min_width, max_width, and any user-specified constraints on
    # the table or column size.
    #
    # Because the natural widths can be silly, this does not always work so well
    # at guessing a good size for columns that have vastly different content. If
    # you see weird problems like CannotFit errors or shockingly bad column
    # sizes, you should specify more column widths manually.
    #
    def column_widths
      @column_widths ||= begin
        if width < cells.min_width
          raise Errors::CannotFit,
            "Table's width was set too small to contain its contents"
        end

        if width > cells.max_width
          raise Errors::CannotFit,
            "Table's width was set larger than its contents' maximum width"
        end

        if width < natural_width
          # Shrink the table to fit the requested width.
          f = (width - cells.min_width).to_f / (natural_width - cells.min_width)

          (0...column_length).map do |c|
            min, nat = column(c).min_width, column(c).width
            (f * (nat - min)) + min
          end
        elsif width > natural_width
          # Expand the table to fit the requested width.
          f = (width - cells.width).to_f / (cells.max_width - cells.width)

          (0...column_length).map do |c|
            nat, max = column(c).width, column(c).max_width
            (f * (max - nat)) + nat
          end
        else
          natural_column_widths
        end
      end
    end

    # Returns an array with the height of each row.
    #
    def row_heights
      @natural_row_heights ||= (0...row_length).map{ |r| row(r).height }
    end

    protected

    # Converts the array of cellable objects given into instances of
    # Prawn::Table::Cell, and sets up their in-table properties so that they
    # know their own position in the table.
    #
    def make_cells(data)
      assert_proper_table_data(data)

      cells = []
      
      @row_length = data.length
      @column_length = data.map{ |r| r.length }.max

      data.each_with_index do |row_cells, row_number|
        row_cells.each_with_index do |cell_data, column_number|
          cell = Cell.make(@pdf, cell_data)
          cell.extend(Cell::InTable)
          cell.row = row_number
          cell.column = column_number
          cells << cell
        end
      end
      cells
    end

    # Raises an error if the data provided cannot be converted into a valid
    # table.
    #
    def assert_proper_table_data(data)
      if data.nil? || data.empty?
        raise Prawn::Errors::EmptyTable,
          "data must be a non-empty, non-nil, two dimensional array " +
          "of cell-convertible objects"
      end

      unless data.all? { |e| Array === e }
        raise Prawn::Errors::InvalidTableData,
          "data must be a two dimensional array of cellable objects"
      end
    end

    # If the table has a header, draw it at the current position.
    #
    def draw_header
      if @header
        y = @pdf.cursor
        row(0).each do |cell|
          cell.y = y
          cell.draw
        end
        @pdf.move_cursor_to(y - row(0).height)
      end
    end

    # Returns an array of each column's natural (unconstrained) width.
    #
    def natural_column_widths
      @natural_column_widths ||= (0...column_length).map { |c| column(c).width }
    end

    # Returns the "natural" (unconstrained) width of the table. This may be
    # extremely silly; for example, the unconstrained width of a paragraph of
    # text is the width it would assume if it were not wrapped at all. Could be
    # a mile long.
    #
    def natural_width
      @natural_width ||= natural_column_widths.inject(0) { |sum, w| sum + w }
    end

    # Assigns the calculated column widths to each cell. This ensures that each
    # cell in a column is the same width. After this method is called,
    # subsequent calls to column_widths and width should return the finalized
    # values that will be used to ink the table.
    #
    def set_column_widths
      column_widths.each_with_index do |w, col_num| 
        column(col_num).width = w
      end
    end

    # Assigns the row heights to each cell. This ensures that every cell in a
    # row is the same height.
    #
    def set_row_heights
      row_heights.each_with_index { |h, row_num| row(row_num).height = h }
    end

    # Set each cell's position based on the widths and heights of cells
    # preceding it.
    #
    def position_cells
      # Calculate x- and y-positions as running sums of widths / heights.
      x_positions = column_widths.inject([0]) { |ary, x| 
        ary << (ary.last + x); ary }[0..-2]
      x_positions.each_with_index { |x, i| column(i).x = x }

      # y-positions assume an infinitely long canvas starting at zero -- this
      # is corrected for in Table#draw, and page breaks are properly inserted.
      y_positions = row_heights.inject([0]) { |ary, y|
        ary << (ary.last - y); ary}[0..-2]
      y_positions.each_with_index { |y, i| row(i).y = y }
    end

  end


end