# frozen_string_literal: true

require_relative '../../spec_helper'
require 'message_bus'

describe PUB_SUB_CLASS do
  def new_test_bus
    PUB_SUB_CLASS.new(MESSAGE_BUS_CONFIG)
  end

  before do
    @bus = new_test_bus
    @bus.reset!
  end

  describe "API parity" do
    it "has the same public methods as the base class" do
      @bus.public_methods.sort.must_equal MessageBus::Backends::Base.new(MESSAGE_BUS_CONFIG).public_methods.sort
    end
  end

  it "should be able to access the backlog" do
    @bus.publish "/foo", "bar"
    @bus.publish "/foo", "baz"

    @bus.backlog("/foo", 0).to_a.must_equal [
      MessageBus::Message.new(1, 1, '/foo', 'bar'),
      MessageBus::Message.new(2, 2, '/foo', 'baz')
    ]
  end

  it "should initialize with max_backlog_size" do
    PUB_SUB_CLASS.new({}, 2000).max_backlog_size.must_equal 2000
  end

  it "should truncate channels correctly" do
    @bus.max_backlog_size = 2
    [
      "one",
      "two",
      "three",
      "four",
    ].each do |t|
      @bus.publish "/foo", t
    end

    @bus.backlog("/foo").to_a.must_equal [
      MessageBus::Message.new(3, 3, '/foo', 'three'),
      MessageBus::Message.new(4, 4, '/foo', 'four'),
    ]
  end

  it "should truncate global backlog correctly" do
    @bus.max_global_backlog_size = 2
    @bus.publish "/foo", "one"
    @bus.publish "/bar", "two"
    @bus.publish "/baz", "three"

    @bus.global_backlog.length.must_equal 2
  end

  it "should be able to grab a message by id" do
    id1 = @bus.publish "/foo", "bar"
    id2 = @bus.publish "/foo", "baz"
    @bus.get_message("/foo", id2).must_equal MessageBus::Message.new(2, 2, "/foo", "baz")
    @bus.get_message("/foo", id1).must_equal MessageBus::Message.new(1, 1, "/foo", "bar")
  end

  it "should have the correct number of messages for multi threaded access" do
    threads = []
    4.times do
      threads << Thread.new do
        25.times {
          @bus.publish "/foo", "foo"
        }
      end
    end

    threads.each(&:join)
    @bus.backlog("/foo").length == 100
  end

  it "should be able to encode and decode messages properly" do
    m = MessageBus::Message.new 1, 2, '||', '||'
    MessageBus::Message.decode(m.encode).must_equal m
  end

  it "should allow us to get last id on a channel" do
    @bus.last_id("/foo").must_equal 0
    @bus.publish("/foo", "one")
    @bus.last_id("/foo").must_equal 1
  end

  describe "readonly" do
    after do
      @bus.pub_redis.slaveof "no", "one"
    end

    it "should be able to store messages in memory for a period while in read only" do
      test_only :redis
      skip "This spec changes redis behavior that in turn means other specs run slow"

      @bus.pub_redis.slaveof "127.0.0.80", "666"
      @bus.max_in_memory_publish_backlog = 2

      current_threads = Thread.list
      current_threads_length = current_threads.count

      3.times do
        result = @bus.publish "/foo", "bar"
        assert_nil result
        Thread.list.length.must_equal(current_threads_length + 1)
      end

      @bus.pub_redis.slaveof "no", "one"
      sleep 0.01

      (Thread.list - current_threads).each(&:join)
      Thread.list.length.must_equal current_threads_length

      @bus.backlog("/foo", 0).map(&:data).must_equal ["bar", "bar"]
    end
  end

  it "can set backlog age" do
    @bus.max_backlog_age = 1

    expected_backlog_size = 0

    # Start at time = 0s
    @bus.publish "/foo", "bar"
    expected_backlog_size += 1

    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size

    sleep 1.25 # Should now be at time =~ 1.25s. Our backlog should have expired by now.
    expected_backlog_size = 0

    case MESSAGE_BUS_CONFIG[:backend]
    when :postgres
      # Force triggering backlog expiry: postgres backend doesn't expire backlogs on a timer, but at publication time.
      @bus.global_backlog.length.wont_equal expected_backlog_size
      @bus.backlog("/foo", 0).length.wont_equal expected_backlog_size
      @bus.publish "/foo", "baz"
      expected_backlog_size += 1
    end

    # Assert that the backlog did expire, and now has only the new publication in it.
    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size

    sleep 0.75 # Should now be at time =~ 2s

    @bus.publish "/foo", "baz" # Publish something else before another expiry
    expected_backlog_size += 1

    sleep 0.75 # Should now be at time =~ 2.75s
    # Our oldest message is now 1.5s old, but we didn't cease publishing for a period of 1s at a time, so we should not have expired the backlog.

    @bus.publish "/foo", "baz" # Publish something else to ward off another expiry
    expected_backlog_size += 1

    case MESSAGE_BUS_CONFIG[:backend]
    when :postgres
      # Postgres expires individual messages that have lived longer than the TTL, not whole backlogs
      expected_backlog_size -= 1
    else
      # Assert that the backlog did not expire, and has all of our publications since the last expiry.
    end
    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size
  end

  it "can set backlog age on publish" do
    @bus.max_backlog_age = 100

    expected_backlog_size = 0

    initial_id = @bus.last_id("/foo")

    # Start at time = 0s
    @bus.publish "/foo", "bar", max_backlog_age: 1
    expected_backlog_size += 1

    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size

    sleep 1.25 # Should now be at time =~ 1.25s. Our backlog should have expired by now.
    expected_backlog_size = 0

    case MESSAGE_BUS_CONFIG[:backend]
    when :postgres
      # Force triggering backlog expiry: postgres backend doesn't expire backlogs on a timer, but at publication time.
      @bus.global_backlog.length.wont_equal expected_backlog_size
      @bus.backlog("/foo", 0).length.wont_equal expected_backlog_size
      @bus.publish "/foo", "baz", max_backlog_age: 1
      expected_backlog_size += 1
    end

    # Assert that the backlog did expire, and now has only the new publication in it.
    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size

    # for the time being we can give pg a pass here
    # TODO: make the implementation here consistent
    if MESSAGE_BUS_CONFIG[:backend] != :postgres
      # ids are not opaque we expect them to be reset on our channel if it
      # got cleared due to an expire, the reason for this is cause we will leak entries due to tracking
      # this in turn can bloat storage for the backend
      @bus.last_id("/foo").must_equal initial_id
    end

    sleep 0.75 # Should now be at time =~ 2s

    @bus.publish "/foo", "baz", max_backlog_age: 1 # Publish something else before another expiry
    expected_backlog_size += 1

    sleep 0.75 # Should now be at time =~ 2.75s
    # Our oldest message is now 1.5s old, but we didn't cease publishing for a period of 1s at a time, so we should not have expired the backlog.

    @bus.publish "/foo", "baz", max_backlog_age: 1 # Publish something else to ward off another expiry
    expected_backlog_size += 1

    case MESSAGE_BUS_CONFIG[:backend]
    when :postgres
      # Postgres expires individual messages that have lived longer than the TTL, not whole backlogs
      expected_backlog_size -= 1
    else
      # Assert that the backlog did not expire, and has all of our publications since the last expiry.
    end
    @bus.global_backlog.length.must_equal expected_backlog_size
    @bus.backlog("/foo", 0).length.must_equal expected_backlog_size
  end

  it "can set backlog size on publish" do
    @bus.max_backlog_size = 100

    @bus.publish "/foo", "bar", max_backlog_size: 2
    @bus.publish "/foo", "bar", max_backlog_size: 2
    @bus.publish "/foo", "bar", max_backlog_size: 2

    @bus.backlog("/foo").length.must_equal 2
  end

  it "should be able to access the global backlog" do
    @bus.publish "/foo", "bar"
    @bus.publish "/hello", "world"
    @bus.publish "/foo", "baz"
    @bus.publish "/hello", "planet"

    expected_messages = case MESSAGE_BUS_CONFIG[:backend]
                        when :redis
                          # Redis has channel-specific message IDs
                          [
                            MessageBus::Message.new(1, 1, "/foo", "bar"),
                            MessageBus::Message.new(2, 1, "/hello", "world"),
                            MessageBus::Message.new(3, 2, "/foo", "baz"),
                            MessageBus::Message.new(4, 2, "/hello", "planet")
                          ]
                        else
                          [
                            MessageBus::Message.new(1, 1, "/foo", "bar"),
                            MessageBus::Message.new(2, 2, "/hello", "world"),
                            MessageBus::Message.new(3, 3, "/foo", "baz"),
                            MessageBus::Message.new(4, 4, "/hello", "planet")
                          ]
    end

    @bus.global_backlog.to_a.must_equal expected_messages
  end

  it "should correctly omit dropped messages from the global backlog" do
    @bus.max_backlog_size = 1
    @bus.publish "/foo", "a1"
    @bus.publish "/foo", "b1"
    @bus.publish "/bar", "a1"
    @bus.publish "/bar", "b1"

    expected_messages = case MESSAGE_BUS_CONFIG[:backend]
                        when :redis
                          # Redis has channel-specific message IDs
                          [
                            MessageBus::Message.new(2, 2, "/foo", "b1"),
                            MessageBus::Message.new(4, 2, "/bar", "b1")
                          ]
                        else
                          [
                            MessageBus::Message.new(2, 2, "/foo", "b1"),
                            MessageBus::Message.new(4, 4, "/bar", "b1")
                          ]
    end

    @bus.global_backlog.to_a.must_equal expected_messages
  end

  it "should cope with a storage reset cleanly" do
    @bus.publish("/foo", "one")
    got = []

    t = Thread.new do
      @bus.subscribe("/foo") do |msg|
        got << msg
      end
    end

    # sleep 50ms to allow the bus to correctly subscribe,
    #   I thought about adding a subscribed callback, but outside of testing it matters less
    sleep 0.05

    @bus.publish("/foo", "two")

    @bus.reset!

    @bus.publish("/foo", "three")

    wait_for(100) do
      got.length == 2
    end

    t.kill

    got.map { |m| m.data }.must_equal ["two", "three"]
    got[1].global_id.must_equal 1
  end

  it "should support clear_every setting" do
    test_never :redis

    @bus.clear_every = 5
    @bus.max_global_backlog_size = 2
    @bus.publish "/foo", "11"
    @bus.publish "/bar", "21"
    @bus.publish "/baz", "31"
    @bus.publish "/bar", "41"
    @bus.global_backlog.length.must_equal 4

    @bus.publish "/baz", "51"
    @bus.global_backlog.length.must_equal 2
  end

  it "should be able to subscribe globally with recovery" do
    @bus.publish("/foo", "11")
    @bus.publish("/bar", "12")
    got = []

    t = Thread.new do
      @bus.global_subscribe(0) do |msg|
        got << msg
      end
    end

    @bus.publish("/bar", "13")

    wait_for(100) do
      got.length == 3
    end

    t.kill

    got.length.must_equal 3
    got.map { |m| m.data }.must_equal ["11", "12", "13"]
  end

  it "should handle subscribe on single channel, with recovery" do
    @bus.publish("/foo", "11")
    @bus.publish("/bar", "12")
    got = []

    t = Thread.new do
      @bus.subscribe("/foo", 0) do |msg|
        got << msg
      end
    end

    @bus.publish("/foo", "13")

    wait_for(100) do
      got.length == 2
    end

    t.kill

    got.map { |m| m.data }.must_equal ["11", "13"]
  end

  it "should not get backlog if subscribe is called without params" do
    @bus.publish("/foo", "11")
    got = []

    t = Thread.new do
      @bus.subscribe("/foo") do |msg|
        got << msg
      end
    end

    # sleep 50ms to allow the bus to correctly subscribe,
    #   I thought about adding a subscribed callback, but outside of testing it matters less
    sleep 0.05

    @bus.publish("/foo", "12")

    wait_for(100) do
      got.length == 1
    end

    t.kill

    got.map { |m| m.data }.must_equal ["12"]
  end

  it 'should not lose redis config' do
    test_only :redis
    redis_config = { connector: Redis::Client::Connector }
    @bus.instance_variable_set(:@redis_config, redis_config)
    @bus.send(:new_redis_connection)
    expect(@bus.instance_variable_get(:@redis_config)[:connector]).must_equal Redis::Client::Connector
  end
end