ULP DEFINITIONS AUTOMATIC TAGS ::= BEGIN

IMPORTS
Version, SessionID FROM ULP-Components
SUPLINIT FROM SUPL-INIT
SUPLSTART FROM SUPL-START
SUPLRESPONSE FROM SUPL-RESPONSE
SUPLPOSINIT FROM SUPL-POS-INIT
SUPLPOS FROM SUPL-POS
SUPLEND FROM SUPL-END
SUPLAUTHREQ FROM SUPL-AUTH-REQ
SUPLAUTHRESP FROM SUPL-AUTH-RESP
Ver2-SUPLTRIGGEREDSTART FROM SUPL-TRIGGERED-START
Ver2-SUPLTRIGGEREDRESPONSE FROM SUPL-TRIGGERED-RESPONSE
Ver2-SUPLREPORT FROM SUPL-REPORT
Ver2-SUPLTRIGGEREDSTOP FROM SUPL-TRIGGERED-STOP
Ver2-SUPLSETINIT FROM SUPL-SET-INIT
Ver2-SUPLNOTIFY FROM SUPL-NOTIFY
Ver2-SUPLNOTIFYRESPONSE FROM SUPL-NOTIFY-RESPONSE;

-- general ULP PDU layout;--
ULP-PDU ::= SEQUENCE {
  length  INTEGER(0..65535),
  version Version,
  sessionID SessionID,
  message UlpMessage
}

UlpMessage ::= CHOICE {
  msSUPLINIT  SUPLINIT,
  msSUPLSTART SUPLSTART,
  msSUPLRESPONSE SUPLRESPONSE,
  msSUPLPOSINIT SUPLPOSINIT,
  msSUPLPOS  SUPLPOS,
  msSUPLEND SUPLEND,
  msSUPLAUTHREQ  SUPLAUTHREQ,
  msSUPLAUTHRESP SUPLAUTHRESP,
  ...,
  msSUPLTRIGGEREDSTART    Ver2-SUPLTRIGGEREDSTART,
  msSUPLTRIGGEREDRESPONSE Ver2-SUPLTRIGGEREDRESPONSE,
  msSUPLTRIGGEREDSTOP    Ver2-SUPLTRIGGEREDSTOP,
  msSUPLNOTIFY  Ver2-SUPLNOTIFY,
  msSUPLNOTIFYRESPONSE   Ver2-SUPLNOTIFYRESPONSE,
  msSUPLSETINIT  Ver2-SUPLSETINIT,
  msSUPLREPORT  Ver2-SUPLREPORT
}

END


SUPL-INIT DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLINIT, Notification;

IMPORTS
SLPAddress, QoP, PosMethod
FROM ULP-Components
Ver2-SUPL-INIT-extension FROM ULP-Version-2-message-extensions
Ver2-Notification-extension FROM ULP-Version-2-parameter-extensions;

SUPLINIT ::= SEQUENCE {
  posMethod PosMethod,
  notification Notification OPTIONAL,
  sLPAddress SLPAddress OPTIONAL,
  qoP  QoP OPTIONAL,
  sLPMode SLPMode,
  mac MAC OPTIONAL, -- included for backwards compatibility
  keyIdentity KeyIdentity OPTIONAL, -- included for backwards compatibility
  ...,
-- version 2 extension element
  ver2-SUPL-INIT-extension  Ver2-SUPL-INIT-extension OPTIONAL
}

Notification ::= SEQUENCE {
  notificationType NotificationType,
  encodingType EncodingType OPTIONAL,
  requestorId OCTET STRING(SIZE (1..maxReqLength)) OPTIONAL,
  requestorIdType  FormatIndicator OPTIONAL,
  clientName  OCTET STRING(SIZE (1..maxClientLength)) OPTIONAL,
  clientNameType  FormatIndicator OPTIONAL,
  ...,
  ver2-Notification-extension Ver2-Notification-extension OPTIONAL
}

NotificationType ::= ENUMERATED {
  noNotificationNoVerification(0),
  notificationOnly(1),
  notificationAndVerficationAllowedNA(2),
  notificationAndVerficationDeniedNA(3),
  privacyOverride(4),
  ...
}

EncodingType ::= ENUMERATED {
  ucs2(0),
  gsmDefault(1),
  utf8(2),
  ...
}

maxReqLength INTEGER ::= 50

maxClientLength INTEGER ::= 50

FormatIndicator ::= ENUMERATED {
  logicalName(0),
  e-mailAddress(1),
  msisdn(2),
  url(3),
  sipUrl(4),
  min(5),
  mdn(6),
  iMSPublicidentity(7),
  ...
}

SLPMode ::= ENUMERATED {proxy(0), nonProxy(1)}

MAC ::= BIT STRING(SIZE (64)) -- empty placeholder required for SUPL 1.0 backwards compatibility

KeyIdentity ::= BIT STRING(SIZE (128)) -- empty placeholder required for SUPL 1.0 backwards compatibility

END


SUPL-START DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLSTART, SETCapabilities;

IMPORTS
LocationId, QoP
FROM ULP-Components
Ver2-SUPL-START-extension FROM ULP-Version-2-message-extensions
Ver2-SETCapabilities-extension,
Ver2-PosProtocol-extension,
Ver2-PosTechnology-extension
FROM ULP-Version-2-parameter-extensions;

SUPLSTART ::= SEQUENCE {
  sETCapabilities SETCapabilities,
  locationId LocationId,
  qoP QoP OPTIONAL,
  ...,
-- version 2 extension element
  ver2-SUPL-START-extension Ver2-SUPL-START-extension OPTIONAL
}

SETCapabilities ::= SEQUENCE {
  posTechnology PosTechnology,
  prefMethod  PrefMethod,
  posProtocol PosProtocol,
  ...,
  ver2-SETCapabilities-extension  Ver2-SETCapabilities-extension OPTIONAL
}

PosTechnology ::= SEQUENCE {
  agpsSETassisted BOOLEAN,
  agpsSETBased  BOOLEAN,
  autonomousGPS  BOOLEAN,
  aflt BOOLEAN,
  ecid  BOOLEAN,
  eotd  BOOLEAN,
  otdoa BOOLEAN,
  ...,
  ver2-PosTechnology-extension Ver2-PosTechnology-extension OPTIONAL
}

PrefMethod ::= ENUMERATED {
  agpsSETassistedPreferred,
  agpsSETBasedPreferred,
  noPreference
}
-- To achieve compatibility with ULP V1.0 the names of the enumerations are
-- kept the same as in ULP V1.0. agps shall be interpreted as agnss.

PosProtocol ::= SEQUENCE {
  tia801 BOOLEAN,
  rrlp  BOOLEAN,
  rrc BOOLEAN,
  ...,
  ver2-PosProtocol-extension  Ver2-PosProtocol-extension OPTIONAL
}

END


SUPL-RESPONSE DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLRESPONSE;

IMPORTS
PosMethod, SLPAddress
FROM ULP-Components
Ver2-SUPL-RESPONSE-extension FROM ULP-Version-2-message-extensions;

SUPLRESPONSE ::= SEQUENCE {
  posMethod PosMethod,
  sLPAddress SLPAddress OPTIONAL,
  sETAuthKey  SETAuthKey OPTIONAL, -- included for backwards compatibility
  keyIdentity4 KeyIdentity4 OPTIONAL, -- included for backwards compatibility
  ...,
-- version 2 extension element
  ver2-SUPL-RESPONSE-extension  Ver2-SUPL-RESPONSE-extension OPTIONAL
}

SETAuthKey ::= CHOICE {
  shortKey BIT STRING(SIZE (128)),
  longKey  BIT STRING(SIZE (256)),
  ...
}

KeyIdentity4 ::= BIT STRING(SIZE (128))

END


SUPL-POS-INIT DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLPOSINIT;

IMPORTS
SUPLPOS FROM SUPL-POS
SETCapabilities FROM SUPL-START
LocationId, Position, Ver FROM ULP-Components
Ver2-SUPL-POS-INIT-extension FROM ULP-Version-2-message-extensions
Ver2-RequestedAssistData-extension FROM ULP-Version-2-parameter-extensions;

SUPLPOSINIT ::= SEQUENCE {
  sETCapabilities SETCapabilities,
  requestedAssistData RequestedAssistData OPTIONAL,
  locationId LocationId,
  position  Position OPTIONAL,
  suplpos SUPLPOS OPTIONAL,
  ver Ver OPTIONAL,
  ...,
  -- version 2 extension element
  ver2-SUPL-POS-INIT-extension  Ver2-SUPL-POS-INIT-extension OPTIONAL
}

RequestedAssistData ::= SEQUENCE {
  almanacRequested BOOLEAN,
  utcModelRequested BOOLEAN,
  ionosphericModelRequested BOOLEAN,
  dgpsCorrectionsRequested BOOLEAN,
  referenceLocationRequested BOOLEAN, -- Note: Used also for GANSS
  referenceTimeRequested BOOLEAN,
  acquisitionAssistanceRequested BOOLEAN,
  realTimeIntegrityRequested  BOOLEAN,
  navigationModelRequested BOOLEAN,
  navigationModelData NavigationModel OPTIONAL,
  ...,
  ver2-RequestedAssistData-extension Ver2-RequestedAssistData-extension OPTIONAL
}

NavigationModel ::= SEQUENCE {
  gpsWeek INTEGER(0..1023),
  gpsToe INTEGER(0..167),
  nsat INTEGER(0..31),
  toeLimit INTEGER(0..10),
  satInfo SatelliteInfo OPTIONAL,
  ...
}

-- Further information on this fields can be found
-- in [3GPP RRLP]and [3GPP 49.031]

SatelliteInfo ::= SEQUENCE (SIZE (1..31)) OF SatelliteInfoElement

SatelliteInfoElement ::= SEQUENCE {
  satId INTEGER(0..63),
  iode  INTEGER(0..255),
  ...
}

END


SUPL-POS DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLPOS;

IMPORTS
Velocity FROM ULP-Components
Ver2-SUPL-POS-extension
FROM ULP-Version-2-message-extensions Ver2-PosPayLoad-extension
FROM ULP-Version-2-parameter-extensions;

SUPLPOS ::= SEQUENCE {
  posPayLoad PosPayLoad,
  velocity Velocity OPTIONAL,
  ...,
  -- version 2 extension element
  ver2-SUPL-POS-extension Ver2-SUPL-POS-extension OPTIONAL
}

PosPayLoad ::= CHOICE {
  tia801payload OCTET STRING(SIZE (1..8192)),
  rrcPayload OCTET STRING(SIZE (1..8192)),
  rrlpPayload  OCTET STRING(SIZE (1..8192)),
  ...,
  ver2-PosPayLoad-extension Ver2-PosPayLoad-extension
}

END


SUPL-END DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLEND;

IMPORTS
StatusCode, Position, Ver FROM ULP-Components
Ver2-SUPL-END-extension FROM ULP-Version-2-message-extensions;

SUPLEND ::= SEQUENCE {
  position  Position OPTIONAL,
  statusCode  StatusCode OPTIONAL,
  ver Ver OPTIONAL,
  ...,
-- version 2 extension element
  ver2-SUPL-END-extension Ver2-SUPL-END-extension OPTIONAL
}

END


SUPL-AUTH-REQ DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLAUTHREQ;

IMPORTS
Ver FROM ULP-Components
SETCapabilities FROM SUPL-START;

SUPLAUTHREQ ::= SEQUENCE {
  ver Ver OPTIONAL,
  sETCapabilities SETCapabilities OPTIONAL,
  ...
}

END


SUPL-AUTH-RESP DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS SUPLAUTHRESP;

IMPORTS
SPCSETKey, SPCTID, SPCSETKeylifetime FROM Ver2-ULP-Components;

SUPLAUTHRESP ::= SEQUENCE {
  sPCSETKey SPCSETKey,
  spctid  SPCTID,
  sPCSETKeylifetime SPCSETKeylifetime OPTIONAL,
  ...
}

END


SUPL-NOTIFY DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLNOTIFY;

IMPORTS
Notification FROM SUPL-INIT;

Ver2-SUPLNOTIFY ::= SEQUENCE {
  notification Notification,
  ...
}

END


SUPL-NOTIFY-RESPONSE DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLNOTIFYRESPONSE;

Ver2-SUPLNOTIFYRESPONSE ::= SEQUENCE {
  notificationResponse NotificationResponse OPTIONAL,
  ...
}

NotificationResponse ::= ENUMERATED {allowed(0), notAllowed(1), ...}

END


SUPL-SET-INIT DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLSETINIT;

IMPORTS
SETId, QoP FROM ULP-Components
ApplicationID FROM Ver2-ULP-Components;

Ver2-SUPLSETINIT ::= SEQUENCE {
  targetSETID SETId, --Target SETid identifies the target SET to be located
  qoP QoP OPTIONAL,
  applicationID ApplicationID OPTIONAL,
  ...
}

END


SUPL-TRIGGERED-START DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLTRIGGEREDSTART, TriggerType, TriggerParams, maxNumGeoArea, maxAreaId, maxAreaIdList;

IMPORTS
LocationId, QoP, Ver, Position FROM ULP-Components
MultipleLocationIds, CauseCode, ThirdParty, ApplicationID, ReportingCap, Coordinate, CircularArea, EllipticalArea, PolygonArea FROM Ver2-ULP-Components
SETCapabilities FROM SUPL-START;

Ver2-SUPLTRIGGEREDSTART ::= SEQUENCE {
  sETCapabilities SETCapabilities,
  locationId LocationId,
  ver Ver OPTIONAL,
  qoP QoP OPTIONAL,
  multipleLocationIds MultipleLocationIds OPTIONAL,
  thirdParty ThirdParty OPTIONAL,
  applicationID ApplicationID OPTIONAL,
  triggerType TriggerType OPTIONAL,
  triggerParams TriggerParams OPTIONAL,
  position  Position OPTIONAL,
  reportingCap ReportingCap OPTIONAL,
  causeCode CauseCode OPTIONAL,
  ...
}

TriggerType ::= ENUMERATED {
  periodic(0),
  areaEvent(1),
  ...
}

TriggerParams ::= CHOICE {
  periodicParams PeriodicParams,
  areaEventParams AreaEventParams,
  ...
}

PeriodicParams ::= SEQUENCE{
  numberOfFixes INTEGER(1.. 8639999),
  intervalBetweenFixes  INTEGER(1.. 8639999),
  startTime INTEGER(0..2678400) OPTIONAL,
  ...
}
-- intervalBetweenFixes and startTime are in seconds.
-- numberOfFixes * intervalBetweenFixes shall not exceed 8639999
-- (100 days in seconds) for compatibility with OMA MLP and RLP
-- startTime is in relative time in units of seconds measured from "now"
-- a value of 0 signifies "now", a value of "startTime" signifies startTime
-- seconds from "now"

AreaEventParams ::= SEQUENCE {
  areaEventType AreaEventType,
  locationEstimate  BOOLEAN,
  repeatedReportingParams RepeatedReportingParams OPTIONAL,
  startTime INTEGER(0..2678400) OPTIONAL,
  stopTime  INTEGER(0..11318399) OPTIONAL,
  geographicTargetAreaList GeographicTargetAreaList OPTIONAL,
  areaIdLists  SEQUENCE (SIZE (1..maxAreaIdList)) OF AreaIdList OPTIONAL,
  ...
}

-- startTime and stopTime are in seconds.
-- startTime and stop Time are in relative time in units of seconds measured
-- from "now"
-- a value of 0 signifies "now"
-- stopTime must be > startTime
-- stopTime - startTime shall not exceed 8639999
-- (100 days in seconds) for compatibility with OMA MLP and RLP

AreaEventType ::= ENUMERATED {
  enteringArea(0),
  insideArea(1),
  outsideArea(2),
  leavingArea(3),
  ...
}

RepeatedReportingParams ::= SEQUENCE {
  minimumIntervalTime INTEGER (1..604800), -- time in seconds
  maximumNumberOfReports INTEGER (1..1024),
  ...
}

GeographicTargetAreaList ::= SEQUENCE (SIZE (1..maxNumGeoArea)) OF GeographicTargetArea

GeographicTargetArea ::= CHOICE {
  circularArea CircularArea,
  ellipticalArea EllipticalArea,
  polygonArea PolygonArea,
  ...
}

AreaIdList ::= SEQUENCE {
  areaIdSet AreaIdSet,
  areaIdSetType AreaIdSetType OPTIONAL,
  geoAreaMappingList GeoAreaMappingList OPTIONAL
}

AreaIdSet ::= SEQUENCE SIZE (1..maxAreaId) OF AreaId

AreaId ::= CHOICE {
  gSMAreaId GSMAreaId,
  wCDMAAreaId WCDMAAreaId, -- For TD-SCDMA networks, this parameter indicates a TD-SCDMA Area ID
  cDMAAreaId  CDMAAreaId,
  hRPDAreaId  HRPDAreaId,
  uMBAreaId UMBAreaId,
  lTEAreaId LTEAreaId,
  wLANAreaId  WLANAreaId,
  wiMAXAreaId WimaxAreaId,
  ...,
  nRAreaId  NRAreaId
}

GSMAreaId ::= SEQUENCE {
  refMCC  INTEGER(0..999) OPTIONAL, -- Mobile Country Code
  refMNC  INTEGER(0..999) OPTIONAL, -- Mobile Network Code
  refLAC  INTEGER(0..65535) OPTIONAL, -- Location Area Code
  refCI INTEGER(0..65535) OPTIONAL, -- Cell Id
  ...
}
-- only one of the following four combinations are allowed: (1) refMCC, (2) refMCC+refMNC, (3) refMCC+refMNC+refLAC or (4) refMCC+refMNC+refLAC+refCI

WCDMAAreaId ::= SEQUENCE {
  refMCC INTEGER(0..999) OPTIONAL, -- Mobile Country Code
  refMNC INTEGER(0..999) OPTIONAL, -- Mobile Network Code
  refLAC INTEGER(0..65535) OPTIONAL, -- Location Area Code
  refUC INTEGER(0..268435455) OPTIONAL, -- Cell identity
  ...
}
-- only one of the following four combinations are allowed: (1) refMCC, (2) refMCC+refMNC, (3) refMCC+refMNC+refLAC, or (4) refMCC+refMNC+refLAC+refUC

CDMAAreaId::= SEQUENCE {
  refSID  INTEGER(0..65535) OPTIONAL, -- System Id
  refNID INTEGER(0..32767) OPTIONAL, -- Network Id
  refBASEID INTEGER(0..65535) OPTIONAL, -- Base Station Id
  ...
}
-- only one of the following three combinations are allowed: (1) refSID, (2) refSID+refNID, or (3) refSID+refNID+refBASEID

HRPDAreaId::= SEQUENCE {
  refSECTORID BIT STRING(SIZE (128)), -- HRPD Sector Id
  ...
}

UMBAreaId::= SEQUENCE {
  refMCC  INTEGER(0..999) OPTIONAL, -- Mobile Country Code
  refMNC  INTEGER(0..999) OPTIONAL, -- Mobile Network Code
  refSECTORID  BIT STRING(SIZE (128)) OPTIONAL, -- UMB Sector Id
  ...
}

LTEAreaId::= SEQUENCE {
  refMCC INTEGER(0..999) OPTIONAL, -- Mobile Country Code
  refMNC INTEGER(0..999) OPTIONAL, -- Mobile Network Code
  refCI BIT STRING(SIZE (29)) OPTIONAL, -- LTE Cell-Id
  ...
}
-- only one of the following three combinations are allowed: (1) refMCC, (2) refMCC+refMNC, or (3) refMCC+refMNC+refCI
-- The LTE Cell-Id is encoded in the 28 Least Significant Bits of refCI
-- The Most Significant Bit of refCI shall be ignored

WLANAreaId::= SEQUENCE {
  apMACAddress BIT STRING(SIZE (48)), -- AP MAC Address
  ...
}

WimaxAreaId ::= SEQUENCE {
  bsID-MSB BIT STRING (SIZE(24)) OPTIONAL,
  bsID-LSB BIT STRING (SIZE(24))
}
-- if only LSB is present, MSB is assumed to be identical to the current serving BS or clamped on network value

NRAreaId ::= SEQUENCE {
  refMCC INTEGER(0..999) OPTIONAL, -- Mobile Country Code
  refMNC INTEGER(0..999) OPTIONAL, -- Mobile Network Code
  refCI BIT STRING(SIZE (36)) OPTIONAL, -- NR Cell-Id
  ...
}
-- only one of the following three combinations are allowed: (1) refMCC, (2)
-- refMCC+refMNC, or (3) refMCC+refMNC+refCI

AreaIdSetType ::= ENUMERATED {
  border(0),
  within(1),
  ...
}

GeoAreaMappingList ::= SEQUENCE (SIZE (1..maxNumGeoArea)) OF GeoAreaIndex

GeoAreaIndex ::= INTEGER (1..maxNumGeoArea)

maxNumGeoArea INTEGER ::= 32

maxAreaId INTEGER ::= 256

maxAreaIdList INTEGER ::= 32

END


SUPL-TRIGGERED-RESPONSE DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLTRIGGEREDRESPONSE;

IMPORTS
PosMethod, SLPAddress FROM ULP-Components
SupportedNetworkInformation, SPCSETKey, SPCTID, SPCSETKeylifetime, GNSSPosTechnology FROM Ver2-ULP-Components
TriggerParams FROM SUPL-TRIGGERED-START;

Ver2-SUPLTRIGGEREDRESPONSE::= SEQUENCE{
  posMethod PosMethod,
  triggerParams TriggerParams OPTIONAL,
  sLPAddress SLPAddress OPTIONAL,
  supportedNetworkInformation SupportedNetworkInformation OPTIONAL,
  reportingMode ReportingMode OPTIONAL,
  sPCSETKey SPCSETKey OPTIONAL,
  spctid SPCTID OPTIONAL,
  sPCSETKeylifetime SPCSETKeylifetime OPTIONAL,
  gnssPosTechnology GNSSPosTechnology OPTIONAL,
  ...
}

ReportingMode ::= SEQUENCE {
  repMode  RepModee,
  batchRepConditions BatchRepConditions OPTIONAL, -- only used for batch reporting
  batchRepType  BatchRepType OPTIONAL, -- only used for batch reporting
  ...
}

RepModee ::= ENUMERATED {
  realtime(1),
  quasirealtime(2),
  batch(3),
  ...
}

BatchRepConditions ::= CHOICE {
  num-interval INTEGER (1..1024), -- number of periodic fixes/measurements after which the batch report is sent to the SLP
  num-minutes INTEGER (1..2048), -- number of minutes after which the batch report is sent to the SLP
  endofsession NULL, -- if selected batch report is to be sent at the end of the session
  ...
}

BatchRepType ::= SEQUENCE {
  reportPosition  BOOLEAN, -- set to "true" if reporting of position is allowed
  reportMeasurements BOOLEAN, -- set to "true" if reporting of measurements is allowed
  intermediateReports BOOLEAN, -- set to "true" if the SET is allowed to send intermediate reports if it runs out of memory
  discardOldest BOOLEAN OPTIONAL, -- set to "true" if the SET should discard the oldest positions or measurements of the batch report in order to save memory, set to "false" the SET should discard the latest positions or measurements
  ...
}

END


SUPL-REPORT DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLREPORT;

IMPORTS
SETCapabilities FROM SUPL-START
Position, PosMethod, SessionID, Ver FROM ULP-Components
MultipleLocationIds, GNSSPosTechnology, GANSSSignals FROM Ver2-ULP-Components
maxGANSS FROM ULP-Version-2-parameter-extensions;

Ver2-SUPLREPORT ::= SEQUENCE {
  sessionList SessionList OPTIONAL,
  sETCapabilities   SETCapabilities OPTIONAL,
  reportDataList  ReportDataList OPTIONAL,
  ver  Ver OPTIONAL,
  moreComponents  NULL OPTIONAL,
  ...
}

SessionList ::= SEQUENCE SIZE (1..maxnumSessions) OF SessionInformation

SessionInformation ::= SEQUENCE {
  sessionID SessionID,
  ...
}

maxnumSessions INTEGER ::= 64

ReportDataList ::= SEQUENCE SIZE (1.. 1024) OF ReportData

ReportData ::= SEQUENCE {
  positionData PositionData OPTIONAL,
  multipleLocationIds MultipleLocationIds OPTIONAL,
  resultCode ResultCode OPTIONAL,
  timestamp TimeStamp OPTIONAL,
  ...
}

PositionData ::= SEQUENCE {
  position Position,
  posMethod PosMethod OPTIONAL,
  gnssPosTechnology GNSSPosTechnology OPTIONAL,
  ganssSignalsInfo GANSSsignalsInfo OPTIONAL,
  ...
}

GANSSsignalsInfo ::= SEQUENCE SIZE (1..maxGANSS) OF GANSSSignalsDescription

GANSSSignalsDescription ::= SEQUENCE {
  ganssId INTEGER(0..15), -- coding according to parameter definition in section 10.10
  gANSSSignals GANSSSignals,
  ...
}

ResultCode ::= ENUMERATED {
  outofradiocoverage(1),
  noposition(2),
  nomeasurement(3),
  nopositionnomeasurement(4),
  outofmemory(5),
  outofmemoryintermediatereporting(6),
  other(7),
  ...
}

TimeStamp ::= CHOICE {
  absoluteTime UTCTime,
  relativeTime INTEGER (0..31536000)
} -- relative time to when the SUPL REPORT message is sent in units of 1 sec, where 0 signifies "now" and n signifies n seconds in the past

END


SUPL-TRIGGERED-STOP DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS Ver2-SUPLTRIGGEREDSTOP;

IMPORTS
StatusCode FROM ULP-Components;

Ver2-SUPLTRIGGEREDSTOP::= SEQUENCE{
  statusCode  StatusCode OPTIONAL,
  ...
}

END


ULP-Version-2-message-extensions DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS
Ver2-SUPL-INIT-extension, Ver2-SUPL-START-extension, Ver2-SUPL-RESPONSE-extension, Ver2-SUPL-POS-INIT-extension, Ver2-SUPL-POS-extension, Ver2-SUPL-END-extension;

IMPORTS
SLPAddress, Position, Ver
FROM ULP-Components
SETCapabilities FROM SUPL-START
SupportedNetworkInformation, GNSSPosTechnology, MultipleLocationIds, UTRAN-GPSReferenceTimeResult, UTRAN-GANSSReferenceTimeResult, UTRAN-GPSReferenceTimeAssistance, UTRAN-GANSSReferenceTimeAssistance, SPCSETKey, SPCTID, SPCSETKeylifetime, ThirdParty, ApplicationID
FROM Ver2-ULP-Components TriggerType
FROM SUPL-TRIGGERED-START
Ver2-HighAccuracyPosition FROM Ver2-ULP-Components;

Ver2-SUPL-INIT-extension ::= SEQUENCE {
  notificationMode  NotificationMode OPTIONAL,
  supportedNetworkInformation  SupportedNetworkInformation OPTIONAL,
  triggerType TriggerType OPTIONAL,
  e-SLPAddress  SLPAddress OPTIONAL,
  historicReporting   HistoricReporting OPTIONAL,
  protectionLevel ProtectionLevel OPTIONAL,
  gnssPosTechnology GNSSPosTechnology OPTIONAL,
  minimumMajorVersion INTEGER (0..255) OPTIONAL,
  ...
}

NotificationMode ::= ENUMERATED {normal(0), basedOnLocation(1), ...}

HistoricReporting ::= SEQUENCE {
  allowedReportingType  AllowedReportingType,
  reportingCriteria ReportingCriteria OPTIONAL,
  ...
}

AllowedReportingType ::= ENUMERATED {
  positionsOnly(0), measurementsOnly(1), positionsAndMeasurements(2),
  ...
}

ReportingCriteria ::= SEQUENCE {
  timeWindow  TimeWindow  OPTIONAL,
  maxNumberofReports INTEGER(1..65536) OPTIONAL,
  minTimeInterval  INTEGER(1..86400) OPTIONAL,
  ...
}

TimeWindow ::= SEQUENCE {
  startTime INTEGER(-525600..-1), -- Time in minutes
  stopTime INTEGER(-525599..0) -- Time in minutes
}

ProtectionLevel ::= SEQUENCE {
  protlevel ProtLevel,
  basicProtectionParams BasicProtectionParams OPTIONAL,
  ...
}

ProtLevel ::= ENUMERATED { nullProtection(0), basicProtection(1), ...}

BasicProtectionParams ::= SEQUENCE {
  keyIdentifier OCTET STRING(SIZE (8)),
  basicReplayCounter  INTEGER(0..65535),
  basicMAC  BIT STRING(SIZE (32)),
  ...
}

Ver2-SUPL-START-extension ::= SEQUENCE {
  multipleLocationIds MultipleLocationIds OPTIONAL,
  thirdParty  ThirdParty OPTIONAL,
  applicationID  ApplicationID OPTIONAL,
  position  Position OPTIONAL,
  ...
}

Ver2-SUPL-RESPONSE-extension ::= SEQUENCE {
  supportedNetworkInformation SupportedNetworkInformation OPTIONAL,
  sPCSETKey SPCSETKey OPTIONAL,
  spctid  SPCTID  OPTIONAL,
  sPCSETKeylifetime SPCSETKeylifetime OPTIONAL,
  initialApproximateposition  Position  OPTIONAL,
  gnssPosTechnology GNSSPosTechnology OPTIONAL,
  ...
}

Ver2-SUPL-POS-INIT-extension ::= SEQUENCE {
  multipleLocationIds MultipleLocationIds OPTIONAL,
  utran-GPSReferenceTimeResult  UTRAN-GPSReferenceTimeResult OPTIONAL,
  utran-GANSSReferenceTimeResult UTRAN-GANSSReferenceTimeResult OPTIONAL,
  ...,
  servingAMF  AMF-Identifier OPTIONAL
}

AMF-Identifier ::= SEQUENCE {
  amf-Region-ID BIT STRING (SIZE (8)),
  amf-Set-ID  BIT STRING (SIZE (10)),
  amf-Pointer BIT STRING (SIZE (6))
}

Ver2-SUPL-POS-extension ::= SEQUENCE {
  utran-GPSReferenceTimeAssistance  UTRAN-GPSReferenceTimeAssistance OPTIONAL,
  utran-GPSReferenceTimeResult UTRAN-GPSReferenceTimeResult OPTIONAL,
  utran-GANSSReferenceTimeAssistance UTRAN-GANSSReferenceTimeAssistance OPTIONAL,
  utran-GANSSReferenceTimeResult  UTRAN-GANSSReferenceTimeResult OPTIONAL,
  ...
}

Ver2-SUPL-END-extension ::= SEQUENCE {
  sETCapabilities  SETCapabilities OPTIONAL,
  ...,
  ver2-HighAccuracyPosition Ver2-HighAccuracyPosition OPTIONAL
}

END


ULP-Version-2-parameter-extensions DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS
maxGANSS, Ver2-Notification-extension, Ver2-SETCapabilities-extension, Ver2-PosProtocol-extension, Ver2-PosTechnology-extension, Ver2-RequestedAssistData-extension, Ver2-PosPayLoad-extension;

IMPORTS
GANSSSignals, ReportingCap
FROM Ver2-ULP-Components
maxNumGeoArea, maxAreaId, maxAreaIdList FROM SUPL-TRIGGERED-START;

Ver2-Notification-extension ::= SEQUENCE {
  emergencyCallLocation NULL OPTIONAL,
  ...
}

Ver2-SETCapabilities-extension ::= SEQUENCE {
  serviceCapabilities ServiceCapabilities OPTIONAL,
  ...,
  supportedBearers SupportedBearers OPTIONAL
}

ServiceCapabilities ::= SEQUENCE {
  servicesSupported ServicesSupported,
  reportingCapabilities ReportingCap OPTIONAL,
  eventTriggerCapabilities EventTriggerCapabilities OPTIONAL,
  sessionCapabilities  SessionCapabilities,
  ...
}

ServicesSupported ::= SEQUENCE {
  periodicTrigger  BOOLEAN,
  areaEventTrigger BOOLEAN,
  ...
}

EventTriggerCapabilities ::= SEQUENCE {
  geoAreaShapesSupported  GeoAreaShapesSupported,
  maxNumGeoAreaSupported  INTEGER (0..maxNumGeoArea) OPTIONAL,
  maxAreaIdListSupported INTEGER (0..maxAreaIdList) OPTIONAL,
  maxAreaIdSupportedPerList   INTEGER (0..maxAreaId) OPTIONAL,
  ...
}

GeoAreaShapesSupported ::= SEQUENCE {
  ellipticalArea  BOOLEAN,
  polygonArea  BOOLEAN,
  ...
}

SessionCapabilities ::= SEQUENCE {
  maxNumberTotalSessions INTEGER (1..128),
  maxNumberPeriodicSessions INTEGER (1..32),
  maxNumberTriggeredSessions  INTEGER (1..32),
  ...
}

SupportedBearers ::= SEQUENCE {
  gsm BOOLEAN,
  wcdma BOOLEAN,
  lte BOOLEAN,
  cdma  BOOLEAN,
  hprd  BOOLEAN,
  umb BOOLEAN,
  wlan  BOOLEAN,
  wiMAX BOOLEAN,
  ...,
  nr  BOOLEAN OPTIONAL
}

Ver2-PosProtocol-extension ::= SEQUENCE {
  lpp BOOLEAN,
  posProtocolVersionRRLP  PosProtocolVersion3GPP OPTIONAL,
  posProtocolVersionRRC  PosProtocolVersion3GPP OPTIONAL,
  posProtocolVersionTIA801 PosProtocolVersion3GPP2 OPTIONAL,
  posProtocolVersionLPP PosProtocolVersion3GPP OPTIONAL,
  ...,
  lppe  BOOLEAN OPTIONAL,
  posProtocolVersionLPPe  PosProtocolVersionOMA OPTIONAL
}

PosProtocolVersion3GPP ::= SEQUENCE {
  majorVersionField INTEGER(0..255),
  technicalVersionField INTEGER(0..255),
  editorialVersionField INTEGER(0..255),
  ...
}

PosProtocolVersion3GPP2 ::= SEQUENCE (SIZE(1..8)) OF Supported3GPP2PosProtocolVersion

Supported3GPP2PosProtocolVersion ::= SEQUENCE {
  revisionNumber  BIT STRING(SIZE (6)), -- the location standard revision number the SET supports coded according to 3GPP2 C.S0022
  pointReleaseNumber  INTEGER(0..255),
  internalEditLevel INTEGER(0..255),
  ...
}

PosProtocolVersionOMA ::= SEQUENCE {
  majorVersionField  INTEGER(0..255),
  minorVersionField  INTEGER(0..255),
  ...
}

Ver2-PosTechnology-extension ::= SEQUENCE {
  gANSSPositionMethods GANSSPositionMethods OPTIONAL,
  ...,
  additionalPositioningMethods  AdditionalPositioningMethods OPTIONAL
}

GANSSPositionMethods ::= SEQUENCE (SIZE(1..16)) OF GANSSPositionMethod

GANSSPositionMethod ::= SEQUENCE {
  ganssId INTEGER(0..15), -- coding according to parameter definition in section 10.10
  ganssSBASid BIT STRING(SIZE(3)) OPTIONAL, --coding according to parameter definition in section 10.10
  gANSSPositioningMethodTypes  GANSSPositioningMethodTypes,
  gANSSSignals GANSSSignals,
  ...,
  rtk RTK OPTIONAL
}

RTK ::= SEQUENCE {osr BOOLEAN, ...}

GANSSPositioningMethodTypes ::= SEQUENCE {
  setAssisted  BOOLEAN,
  setBased  BOOLEAN,
  autonomous  BOOLEAN,
  ...
}

AdditionalPositioningMethods ::= SEQUENCE (SIZE(1..8)) OF AddPosSupport-Element

AddPosSupport-Element ::= SEQUENCE {
  addPosID ENUMERATED {
    mBS,
    ...,
    nr-DL-TDOA, nr-DL-AoD,
    nr-Multi-RTT, nr-DL-E-CID, nr-UL-TDOA,
    nr-UL-AoA
  },
  addPosMode  BIT STRING {
    standalone  (0),
    setBased  (1),
    setAssisted (2)
  } (SIZE (1..8)) OPTIONAL,
  ...
}

Ver2-RequestedAssistData-extension ::= SEQUENCE {
  ganssRequestedCommonAssistanceDataList
  GanssRequestedCommonAssistanceDataList OPTIONAL,
  ganssRequestedGenericAssistanceDataList
  GanssRequestedGenericAssistanceDataList OPTIONAL,
  extendedEphemeris ExtendedEphemeris OPTIONAL,
  extendedEphemerisCheck  ExtendedEphCheck OPTIONAL,
  ...
}

GanssRequestedCommonAssistanceDataList ::= SEQUENCE {
  ganssReferenceTime  BOOLEAN,
  ganssIonosphericModel BOOLEAN,
  ganssAdditionalIonosphericModelForDataID00 BOOLEAN,
  ganssAdditionalIonosphericModelForDataID11 BOOLEAN,
  ganssEarthOrientationParameters  BOOLEAN,
  ...,
  ganssAdditionalIonosphericModelForDataID01  BOOLEAN OPTIONAL
}

GanssRequestedGenericAssistanceDataList ::= SEQUENCE(SIZE(1..maxGANSS)) OF GanssReqGenericData

GanssReqGenericData ::= SEQUENCE {
  ganssId INTEGER(0..15), -- coding according to parameter definition in section 10.10
  ganssSBASid BIT STRING(SIZE(3)) OPTIONAL, --coding according to parameter definition in section 10.10
  ganssRealTimeIntegrity  BOOLEAN,
  ganssDifferentialCorrection  DGANSS-Sig-Id-Req OPTIONAL,
  ganssAlmanac  BOOLEAN,
  ganssNavigationModelData  GanssNavigationModelData OPTIONAL,
  ganssTimeModels  BIT STRING(SIZE(16)) OPTIONAL,
  ganssReferenceMeasurementInfo  BOOLEAN,
  ganssDataBits GanssDataBits OPTIONAL,
  ganssUTCModel BOOLEAN,
  ganssAdditionalDataChoices GanssAdditionalDataChoices OPTIONAL,
  ganssAuxiliaryInformation BOOLEAN,
  ganssExtendedEphemeris ExtendedEphemeris OPTIONAL,
  ganssExtendedEphemerisCheck GanssExtendedEphCheck OPTIONAL,
  ...,
  bds-DifferentialCorrection BDS-Sig-Id-Req OPTIONAL,
  bds-GridModelReq  BOOLEAN OPTIONAL
}

DGANSS-Sig-Id-Req ::= BIT STRING (SIZE(8)) -- coding according to parameter definition in section 10.9

BDS-Sig-Id-Req ::= BIT STRING (SIZE(8)) -- coding according to parameter definition in section 10.9

GanssNavigationModelData ::= SEQUENCE {
  ganssWeek INTEGER(0..4095),
  ganssToe  INTEGER(0..167),
  t-toeLimit  INTEGER(0..15),
  satellitesListRelatedDataList SatellitesListRelatedDataList OPTIONAL,
  ...
}

SatellitesListRelatedDataList ::= SEQUENCE(SIZE(0..maxGANSSSat)) OF SatellitesListRelatedData

SatellitesListRelatedData ::= SEQUENCE {
  satId INTEGER(0..63),
  iod INTEGER(0..1023),
  ...
}

maxGANSS  INTEGER ::= 16

maxGANSSSat INTEGER ::= 32

GanssDataBits ::= SEQUENCE {
  ganssTODmin INTEGER (0..59),
  reqDataBitAssistanceList ReqDataBitAssistanceList,
  ...
}

ReqDataBitAssistanceList ::= SEQUENCE {
  gnssSignals GANSSSignals,
  ganssDataBitInterval  INTEGER (0..15),
  ganssDataBitSatList SEQUENCE (SIZE(1..maxGANSSSat)) OF INTEGER (0..63) OPTIONAL,
  ...
}

GanssAdditionalDataChoices ::= SEQUENCE {
  orbitModelID  INTEGER(0..7) OPTIONAL,
  clockModelID  INTEGER(0..7) OPTIONAL,
  utcModelID  INTEGER(0..7) OPTIONAL,
  almanacModelID  INTEGER(0..7) OPTIONAL,
  ...
}

ExtendedEphemeris ::= SEQUENCE {
  validity  INTEGER (1..256), -- Requested validity in 4 hour steps
  ...
}

ExtendedEphCheck ::= SEQUENCE {
  beginTime GPSTime, -- Begin time of ephemeris extension held by SET
  endTime GPSTime, -- End time of ephemeris extension held by SET
  ...
}

GanssExtendedEphCheck ::= SEQUENCE {
  beginTime GANSSextEphTime, -- Begin time of ephemeris extension held by SET
  endTime GANSSextEphTime, -- End time of ephemeris extension held by SET
  ...
}

GPSTime ::= SEQUENCE {
  gPSWeek INTEGER (0..1023),
  gPSTOWhour INTEGER (0..167),
  ...
}

GANSSextEphTime ::= SEQUENCE {
  gANSSday INTEGER (0..8191),
  gANSSTODhour  INTEGER (0..23),
  ...
}

Ver2-PosPayLoad-extension ::= SEQUENCE {
  lPPPayload SEQUENCE (SIZE (1..3)) OF OCTET STRING(SIZE (1..60000)) OPTIONAL,
  tia801Payload SEQUENCE (SIZE(1..3)) OF OCTET STRING(SIZE (1..60000)) OPTIONAL,
  ...
}

END


ULP-Components DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS
Version, SessionID, IPAddress, SLPAddress, LocationId, Position, StatusCode, Velocity, QoP, PosMethod, Ver, SETId, PrimaryCPICH-Info, CellParametersID, FQDN;

IMPORTS
Ver2-CellInfo-extension FROM Ver2-ULP-Components;

-- protocol version expressed as x.y.z (e.g., 5.1.0)
Version ::= SEQUENCE {
  maj INTEGER(0..255),
  min INTEGER(0..255),
  servind INTEGER(0..255)
}

SessionID ::= SEQUENCE {
  setSessionID SetSessionID OPTIONAL, -- the semantics of OPTIONAL applies to the encoding only. The parameter itself is MANDATORY. This is introduced only to minimize bandwidth for the SUPL INIT message. Since the setSessionID is allocated by the SET, there is no setSessionID to be transmitted in the SUPL INIT message.
  slpSessionID SlpSessionID OPTIONAL -- the semantics of OPTIONAL applies to the encoding only. The parameter itself is MANDATORY. This is introduced only to minimize bandwidth for the SUPL START, SUPL TRIGGERED START and SUPL SET INIT messages. Since the slpSessionID is allocated by the SLP, there is no slpSessionID to be transmitted in these messages (with the exception described in section 10.14).
}


SetSessionID ::= SEQUENCE {
  sessionId INTEGER(0..65535),
  setId SETId
}

SETId ::= CHOICE {
  msisdn  OCTET STRING(SIZE (8)),
  mdn OCTET STRING(SIZE (8)),
  min BIT STRING(SIZE (34)), -- coded according to TIA-553
  imsi OCTET STRING(SIZE (8)),
  nai IA5String(SIZE (1..1000)),
  iPAddress IPAddress,
  ...,
  ver2-imei OCTET STRING(SIZE(8))
}
-- msisdn, mnd, imsi and imei are a BCD (Binary Coded Decimal) string
-- represent digits from 0 through 9,
-- two digits per octet, each digit encoded 0000 to 1001 (0 to 9)
-- bits 8765 of octet n encoding digit 2n
-- bits 4321 of octet n encoding digit 2(n-1) +1
-- not used digits in the string shall be filled with 1111
-- imei SHALL NOT be used unless the SLP indicates support for SUPL ver 2.0.3
-- or greater

SlpSessionID ::= SEQUENCE {
  sessionID OCTET STRING(SIZE (4)),
  slpId SLPAddress
}

IPAddress ::= CHOICE {
  ipv4Address OCTET STRING(SIZE (4)),
  ipv6Address OCTET STRING(SIZE (16))
}

SLPAddress ::= CHOICE {
  iPAddress IPAddress,
  fqdn  FQDN,
  ...
}

FQDN ::= VisibleString(FROM ("a".."z" | "A".."Z" | "0".."9" |".-"))(SIZE (1..255))

Ver ::= BIT STRING(SIZE (64))

LocationId ::= SEQUENCE {
  cellInfo CellInfo,
  status  Status,
  ...
}

Status ::= ENUMERATED {stale(0), current(1), unknown(2), ...}

CellInfo ::= CHOICE {
  gsmCell GsmCellInformation,
  wcdmaCell WcdmaCellInformation, --WCDMA Cell Information/TD-SCDMA Cell Information
  cdmaCell  CdmaCellInformation,
  ...,
  ver2-CellInfo-extension Ver2-CellInfo-extension
}

Position ::= SEQUENCE {
  timestamp UTCTime, -- shall include seconds and shall use UTC time.
  positionEstimate PositionEstimate,
  velocity  Velocity OPTIONAL,
  ...
}

PositionEstimate ::= SEQUENCE {
  latitudeSign ENUMERATED {north, south}, 
  atitude  INTEGER(0..8388607),
  longitude  INTEGER(-8388608..8388607),
  uncertainty SEQUENCE {
    uncertaintySemiMajor INTEGER(0..127),
    uncertaintySemiMinor INTEGER(0..127),
    orientationMajorAxis INTEGER(0..180)
  } OPTIONAL, -- angle in degree between major axis and North
  confidence  INTEGER(0..100) OPTIONAL,
  altitudeInfo AltitudeInfo OPTIONAL,
  ...
} -- Coding as in [3GPP GAD]

AltitudeInfo ::= SEQUENCE {
  altitudeDirection ENUMERATED {height, depth},
  altitude  INTEGER(0..32767),
  altUncertainty INTEGER(0..127),
  ...
} -- based on [3GPP GAD]

CdmaCellInformation ::= SEQUENCE {
  refNID  INTEGER(0..65535), -- Network Id
  refSID INTEGER(0..32767), -- System Id
  refBASEID INTEGER(0..65535), -- Base Station Id
  refBASELAT  INTEGER(0..4194303), -- Base Station Latitude
  reBASELONG  INTEGER(0..8388607), -- Base Station Longitude
  refREFPN INTEGER(0..511), -- Base Station PN Code
  refWeekNumber INTEGER(0..65535), -- GPS Week Number
  refSeconds INTEGER(0..4194303), -- GPS Seconds
  ...
}

GsmCellInformation ::= SEQUENCE {
  refMCC INTEGER(0..999), -- Mobile Country Code
  refMNC INTEGER(0..999), -- Mobile Network Code
  refLAC INTEGER(0..65535), -- Location area code
  refCI INTEGER(0..65535), -- Cell identity
  nmr NMR OPTIONAL,
  ta  INTEGER(0..255) OPTIONAL, --Timing Advance
  ...
}

WcdmaCellInformation ::= SEQUENCE {
  refMCC  INTEGER(0..999), -- Mobile Country Code
  refMNC  INTEGER(0..999), -- Mobile Network Code
  refUC INTEGER(0..268435455), -- Cell identity
  frequencyInfo FrequencyInfo OPTIONAL,
  primaryScramblingCode INTEGER(0..511) OPTIONAL, -- Not applicable for TDD
  measuredResultsList MeasuredResultsList OPTIONAL,
  ...,
  cellParametersId    INTEGER(0..127) OPTIONAL, -- Not applicable for FDD
  timingAdvance TimingAdvance OPTIONAL -- Not applicable for FDD
}

TimingAdvance ::= SEQUENCE {
  ta INTEGER (0..8191),
  tAResolution  TAResolution OPTIONAL, --If missing, resolution is 0.125 chips
  chipRate ChipRate OPTIONAL, --If missing, chip rate is 1.28 Mchip/s
  ...
}

TAResolution ::= ENUMERATED {
  res10chip(0), res05chip(1), res0125chip(2), ...
} -- Corresponding to 1.0-chip, 0.5-chip and 0.125-chip resolutions, respectively

ChipRate ::= ENUMERATED {
  tdd128(0), tdd384(1), tdd768(2), ...
} --Corresponding to 1.28-Mchips/s, 3.84-Mchips/s and 7.68-Mchips/s chip rates, respectively


FrequencyInfo ::= SEQUENCE {
  modeSpecificInfo CHOICE {
    fdd FrequencyInfoFDD,
    tdd FrequencyInfoTDD,
    ...
  },
  ...
}

FrequencyInfoFDD ::= SEQUENCE {
  uarfcn-UL UARFCN OPTIONAL,
  uarfcn-DL UARFCN,
  ...
}

FrequencyInfoTDD ::= SEQUENCE {
  uarfcn-Nt UARFCN,
  ...
}

UARFCN ::= INTEGER(0..16383)

NMR ::= SEQUENCE (SIZE (1..15)) OF NMRelement

NMRelement ::= SEQUENCE {
  arfcn INTEGER(0..1023),
  bsic  INTEGER(0..63),
  rxLev INTEGER(0..63),
  ...
}

MeasuredResultsList ::= SEQUENCE (SIZE (1..maxFreq)) OF MeasuredResults

MeasuredResults ::= SEQUENCE {
  frequencyInfo FrequencyInfo OPTIONAL,
  utra-CarrierRSSI  UTRA-CarrierRSSI OPTIONAL,
  cellMeasuredResultsList CellMeasuredResultsList OPTIONAL
}

CellMeasuredResultsList ::= SEQUENCE (SIZE (1..maxCellMeas)) OF CellMeasuredResults

-- SPARE: UTRA-CarrierRSSI, Max = 76
-- Values above Max are spare
UTRA-CarrierRSSI ::= INTEGER(0..127)

CellMeasuredResults ::= SEQUENCE {
  cellIdentity  INTEGER(0..268435455) OPTIONAL,
  modeSpecificInfo CHOICE {
    fdd SEQUENCE {
      primaryCPICH-Info PrimaryCPICH-Info,
      cpich-Ec-N0  CPICH-Ec-N0 OPTIONAL,
      cpich-RSCP  CPICH-RSCP OPTIONAL,
      pathloss  Pathloss OPTIONAL
    },
    tdd SEQUENCE {
      cellParametersID  CellParametersID,
      proposedTGSN  TGSN OPTIONAL,
      primaryCCPCH-RSCP PrimaryCCPCH-RSCP OPTIONAL,
      pathloss  Pathloss OPTIONAL,
      timeslotISCP-List TimeslotISCP-List OPTIONAL --NOTE: TimeSlotISCP measurement list cannot be interpreted without the knowledge of Cell Info as defined in [3GPP RRC]
    }
  }
}

CellParametersID ::= INTEGER(0..127)

TGSN ::= INTEGER(0..14)

PrimaryCCPCH-RSCP ::= INTEGER(0..127)

-- SPARE: TimeslotISCP, Max = 91
-- Values above Max are spare
TimeslotISCP ::= INTEGER(0..127)

TimeslotISCP-List ::= SEQUENCE (SIZE (1..maxTS)) OF TimeslotISCP

PrimaryCPICH-Info ::= SEQUENCE {primaryScramblingCode INTEGER(0..511)}

-- SPARE: CPICH-Ec-No, Max = 49
-- Values above Max are spare
CPICH-Ec-N0 ::= INTEGER(0..63)

-- SPARE: CPICH-RSCP, data range from 0 to 91 and from 123 to 127.
-- Values from 92 to 122 are spare
-- the encoding of cpich-RSCP is (as per [3GPP RRC] V5.11.0)

-- cpich-RSCP = 123   CPICH RSCP <-120 dBm
-- cpich-RSCP = 124   -120 <= CPICH RSCP < -119 dBm
-- cpich-RSCP = 125   -119 <= CPICH RSCP < -118 dBm
-- cpich-RSCP = 126   -118 <= CPICH RSCP < -117 dBm
-- cpich-RSCP = 127   -117 <= CPICH RSCP < -116 dBm
-- cpich-RSCP = 0     -116 <= CPICH RSCP < -115 dBm
-- cpich-RSCP = 1     -115 <= CPICH RSCP < -114 dBm
-- ...
-- cpich-RSCP = 89    -27 <= CPICH RSCP < -26 dBm
-- cpich-RSCP = 90    -26 <= CPICH RSCP < -25 dBm
-- cpich-RSCP = 91    -25 <= CPICH RSCP  dBm

CPICH-RSCP ::= INTEGER(0..127)

-- SPARE: Pathloss, Max = 158
-- Values above Max are spare
Pathloss ::= INTEGER(46..173)

maxCellMeas INTEGER ::= 32

maxFreq INTEGER ::= 8

maxTS INTEGER ::= 14

StatusCode ::= ENUMERATED {
  unspecified(0), systemFailure(1), unexpectedMessage(2), protocolError(3),
  dataMissing(4), unexpectedDataValue(5), posMethodFailure(6), posMethodMismatch(7),
  posProtocolMismatch(8), targetSETnotReachable(9), versionNotSupported(10),
  resourceShortage(11), invalidSessionId(12), nonProxyModeNotSupported(13),
  proxyModeNotSupported(14), positioningNotPermitted(15), authNetFailure(16),
  authSuplinitFailure(17),
  consentDeniedByUser(100), consentGrantedByUser(101), ...,
  ver2-incompatibleProtectionLevel(18), ver2-serviceNotSupported(19),
  ver2-insufficientInterval(20), ver2-noSUPLCoverage(21),
  ver2-sessionStopped(102), ver2-appIdDenied(103)
}

QoP ::= SEQUENCE {
  horacc  INTEGER(0..127),
  veracc  INTEGER(0..127) OPTIONAL, -- as defined in [3GPP GAD] "uncertainty altitude"
  maxLocAge INTEGER(0..65535) OPTIONAL,
  delay INTEGER(0..7) OPTIONAL, -- as defined in [3GPP RRLP]
  ...,
  ver2-responseTime INTEGER (1..128) OPTIONAL
}

Velocity ::= CHOICE { -- velocity definition as per [3GPP GAD]
  horvel Horvel,
  horandvervel  Horandvervel,
  horveluncert  Horveluncert,
  horandveruncert Horandveruncert,
  ...
}

Horvel ::= SEQUENCE {
  bearing BIT STRING(SIZE (9)),
  horspeed BIT STRING(SIZE (16)),
  ...
}

Horandvervel ::= SEQUENCE {
  verdirect BIT STRING(SIZE (1)),
  bearing BIT STRING(SIZE (9)),
  horspeed  BIT STRING(SIZE (16)),
  verspeed BIT STRING(SIZE (8)),
  ...
}

Horveluncert ::= SEQUENCE {
  bearing BIT STRING(SIZE (9)),
  horspeed  BIT STRING(SIZE (16)),
  uncertspeed BIT STRING(SIZE (8)),
  ...
}

Horandveruncert ::= SEQUENCE {
  verdirect  BIT STRING(SIZE (1)),
  bearing BIT STRING(SIZE (9)),
  horspeed  BIT STRING(SIZE (16)),
  verspeed  BIT STRING(SIZE (8)),
  horuncertspeed BIT STRING(SIZE (8)),
  veruncertspeed BIT STRING(SIZE (8)),
  ...
}

PosMethod ::= ENUMERATED {
  agpsSETassisted(0), agpsSETbased(1), agpsSETassistedpref(2),
  agpsSETbasedpref(3), autonomousGPS(4),
  aflt(5), ecid(6), eotd(7), otdoa(8), noPosition(9),
  ...,
  ver2-historicalDataRetrieval(10), ver2-agnssSETassisted(11),
  ver2-agnssSETbased(12), ver2-agnssSETassistedpref(13), ver2-agnssSETbasedpref(14),
  ver2-autonomousGNSS(15), ver2-sessioninfoquery(16), ver2-mbs(17),
  ver2-NR-DL-TDOA(18), ver2-NR-DL-AoD(19), ver2-NR-Multi-RTT(20),
  ver2-NR-DL-E-CID(21), ver2-NR-UL-TDOA(22), ver2-NR-UL-AoA(23)
}

END


Ver2-ULP-Components DEFINITIONS AUTOMATIC TAGS ::= BEGIN

EXPORTS
Ver2-CellInfo-extension, MultipleLocationIds, SupportedNetworkInformation, CauseCode, UTRAN-GPSReferenceTimeAssistance, UTRAN-GPSReferenceTimeResult, SPCSETKey, SPCTID, SPCSETKeylifetime, UTRAN-GANSSReferenceTimeAssistance, UTRAN-GANSSReferenceTimeResult, GNSSPosTechnology, GANSSSignals, ThirdParty, ApplicationID, ReportingCap, Coordinate, CircularArea, EllipticalArea, PolygonArea, Ver2-HighAccuracyPosition;

IMPORTS
LocationId, PrimaryCPICH-Info, CellParametersID, FQDN, Velocity FROM ULP-Components;

MultipleLocationIds ::= SEQUENCE SIZE (1..maxLidSize) OF LocationIdData

LocationIdData ::= SEQUENCE {
  locationId  LocationId,
  relativetimestamp RelativeTime OPTIONAL, -- if relativetimestamp is present, then data represents historical measurement, if absent, data represents current measurements
  servingFlag BOOLEAN, -- if "true" measurements represent serving cell
  ...
}

RelativeTime ::= INTEGER (0..65535) -- relative time to "current" Location Id in multiples of 0.01sec

maxLidSize  INTEGER ::= 64

SupportedNetworkInformation ::= SEQUENCE {
  wlan BOOLEAN,
  supportedWLANInfo SupportedWLANInfo OPTIONAL,
  supportedWLANApsList  SupportedWLANApsList OPTIONAL,
  gsm BOOLEAN,
  wcdma BOOLEAN,
  supportedWCDMAInfo  SupportedWCDMAInfo OPTIONAL,
  cdma  BOOLEAN,
  hrdp  BOOLEAN,
  umb BOOLEAN,
  lte BOOLEAN,
  wimax BOOLEAN,
  historic  BOOLEAN,
  nonServing  BOOLEAN,
  uTRANGPSReferenceTime BOOLEAN,
  uTRANGANSSReferenceTime BOOLEAN,
  ...,
  nr  BOOLEAN OPTIONAL
}

SupportedWLANInfo ::= SEQUENCE {
  apTP  BOOLEAN, -- AP transmit power
  apAG  BOOLEAN, -- AP antenna gain
  apSN  BOOLEAN, -- AP S/N received at SET
  apDevType  BOOLEAN, -- Device type
  apRSSI  BOOLEAN, -- AP signal strength at SET
  apChanFreq BOOLEAN, -- AP channel/frequency of Tx/Rx
  apRTD BOOLEAN, -- Round Trip Delay between SET and AP
  setTP BOOLEAN, -- SET transmit power
  setAG BOOLEAN, -- SET antenna gain
  setSN BOOLEAN, -- SET S/N received at AP
  setRSSI  BOOLEAN, -- SET signal strength at AP
  apRepLoc  BOOLEAN, -- AP Location as reported by AP (legacy encoding)
  ...,
  apRL  BOOLEAN OPTIONAL, -- AP Location as reported by AP (as per IEEE802.11)
  opClass BOOLEAN OPTIONAL, -- operating class as defined in IEEE 802.11
  apSSID BOOLEAN OPTIONAL, -- SSID of the wireless network served by AP
  apPHYType  BOOLEAN OPTIONAL, -- AP PHY Type as defined in IEEE 802.11
  setMACAddress BOOLEAN OPTIONAL -- SET MAC Address as known to the WLAN AP
}

maxWLANApDataSize INTEGER ::= 128

SupportedWLANApsList ::= SEQUENCE {
  supportedWLANApDataList SEQUENCE (SIZE (1..maxWLANApDataSize)) OF SupportedWLANApData,
  supportedWLANapsChannel11a SupportedWLANApsChannel11a OPTIONAL,
  supportedWLANapsChannel11bg SupportedWLANApsChannel11bg OPTIONAL,
  ...
}

SupportedWLANApsChannel11a ::= SEQUENCE {
  ch34  BOOLEAN,
  ch36  BOOLEAN,
  ch38  BOOLEAN,
  ch40  BOOLEAN,
  ch42  BOOLEAN,
  ch44  BOOLEAN,
  ch46  BOOLEAN,
  ch48  BOOLEAN,
  ch52  BOOLEAN,
  ch56  BOOLEAN,
  ch60  BOOLEAN,
  ch64  BOOLEAN,
  ch149 BOOLEAN,
  ch153 BOOLEAN,
  ch157 BOOLEAN,
  ch161 BOOLEAN
}

SupportedWLANApsChannel11bg ::= SEQUENCE {
  ch1 BOOLEAN,
  ch2 BOOLEAN,
  ch3 BOOLEAN,
  ch4 BOOLEAN,
  ch5 BOOLEAN,
  ch6 BOOLEAN,
  ch7 BOOLEAN,
  ch8 BOOLEAN,
  ch9 BOOLEAN,
  ch10 BOOLEAN,
  ch11 BOOLEAN,
  ch12 BOOLEAN,
  ch13 BOOLEAN,
  ch14 BOOLEAN
}

SupportedWLANApData ::= SEQUENCE {
  apMACAddress BIT STRING (SIZE (48)),
  apDevType ENUMERATED {
    wlan802-11a(0), wlan802-11b(1), wlan802-11g(2), ...
  },
  ...
}

SupportedWCDMAInfo ::= SEQUENCE {
  mrl BOOLEAN, -- Measured Results List
  ...
}

Ver2-CellInfo-extension ::= CHOICE {
  hrpdCell HrpdCellInformation,
  umbCell  UmbCellInformation,
  lteCell LteCellInformation,
  wlanAP  WlanAPInformation,
  wimaxBS  WimaxBSInformation,
  ...,
  nrCell  NRCellInformation
}

HrpdCellInformation ::= SEQUENCE {
  refSECTORID BIT STRING(SIZE (128)) OPTIONAL, -- HRPD Sector Id
  refBASELAT  INTEGER(0..4194303), -- Base Station Latitude
  reBASELONG  INTEGER(0..8388607), -- Base Station Longitude
  refWeekNumber INTEGER(0..65535), -- GPS Week Number
  refSeconds INTEGER(0..4194303), -- GPS Seconds
  ...
}

UmbCellInformation ::= SEQUENCE {
  refSECTORID BIT STRING(SIZE (128)), -- UMB Sector Id
  refMCC  INTEGER(0..999), -- Mobile Country Code
  refMNC  INTEGER(0..999), -- Mobile Network Code
  refBASELAT  INTEGER(0..4194303), -- Base Station Latitude
  reBASELONG  INTEGER(0..8388607), -- Base Station Longitude
  refWeekNumber  INTEGER(0..65535), -- GPS Week Number
  refSeconds  INTEGER(0..4194303), -- GPS Seconds
  ...
}

-- LTE Cell info per 3GPP TS 36.331.
-- If not otherwise stated info is related to serving cell

LteCellInformation ::= SEQUENCE {
  cellGlobalIdEUTRA CellGlobalIdEUTRA,
  physCellId  PhysCellId,
  trackingAreaCode  TrackingAreaCode,
  rsrpResult  RSRP-Range  OPTIONAL,
  rsrqResult  RSRQ-Range  OPTIONAL,
  ta  INTEGER(0..1282) OPTIONAL, -- Currently used Timing Advance value (N_TA/16 as per [3GPP 36.213])
  measResultListEUTRA MeasResultListEUTRA OPTIONAL, --Neighbour measurements
  ...,
  earfcn INTEGER(0..65535) OPTIONAL, -- see Table 37
  earfcn-ext INTEGER (65536..262143) OPTIONAL, -- see Table 37
  rsrpResult-ext RSRP-Range-Ext  OPTIONAL,
  rsrqResult-ext RSRQ-Range-Ext  OPTIONAL,
  rs-sinrResult RS-SINR-Range   OPTIONAL,
  servingInformation5G    ServingInformation5G  OPTIONAL
}
-- If rsrpResult-ext is included, rsrpResult shall be excluded or set to 0
-- If rsrqResult-ext is included and in the range 0 to 34, rsrqResult shall
--  be included and set equal to rsrqResult-ext
-- If rsrqResult-ext is included and outside the range 0 to 34, rsrqResult shall
--  be excluded or set to 0 when rsrqResult-ext is negative or to 34 when
--  rsrqResult-ext is positive
-- servingInformation5G shall be included for a serving cell connected to 5GCN

-- Measured results of neighbours cells per 3GPP TS 36.331

MeasResultListEUTRA ::= SEQUENCE (SIZE (1..maxCellReport)) OF MeasResultEUTRA

MeasResultEUTRA ::= SEQUENCE {
  physCellId PhysCellId,
  cgi-Info SEQUENCE {
    cellGlobalId CellGlobalIdEUTRA,
    trackingAreaCode TrackingAreaCode
  } OPTIONAL,
  measResult SEQUENCE {
    rsrpResult  RSRP-Range  OPTIONAL, -- Mapping to measured values
    rsrqResult  RSRQ-Range  OPTIONAL, -- in 3GPP TS 36.133
    ...,
    earfcn  INTEGER(0..65535) OPTIONAL, -- see Table 37
    earfcn-ext  INTEGER (65536..262143) OPTIONAL, -- see Table 37
    rsrpResult-ext  RSRP-Range-Ext  OPTIONAL,
    rsrqResult-ext  RSRQ-Range-Ext  OPTIONAL,
    rs-sinrResult RS-SINR-Range   OPTIONAL,
    neighbourInformation5G  NeighbourInformation5G  OPTIONAL
  }
}
-- If rsrpResult-ext is included, rsrpResult shall be excluded or set to 0
-- If rsrqResult-ext is included and in the range 0 to 34, rsrqResult shall
--  be included and set equal to rsrqResult-ext
-- If rsrqResult-ext is included and outside the range 0 to 34, rsrqResult shall
--  be excluded or set to 0 when rsrqResult-ext is negative or to 34 when
--  rsrqResult-ext is positive
-- neighbourInformation5G may only be included for a cell connected to 5GCN

PhysCellId ::=  INTEGER (0..503)

TrackingAreaCode ::= BIT STRING (SIZE (16))

CellGlobalIdEUTRA ::= SEQUENCE {
  plmn-Identity  PLMN-Identity,
  cellIdentity  CellIdentity,
  ...
}

PLMN-Identity ::= SEQUENCE {
  mcc MCC OPTIONAL,
  mnc MNC
}

CellIdentity ::= BIT STRING (SIZE (28))

MCC ::= SEQUENCE (SIZE (3)) OF MCC-MNC-Digit

MNC ::= SEQUENCE (SIZE (2..3)) OF MCC-MNC-Digit

MCC-MNC-Digit ::= INTEGER (0..9)

RSRP-Range ::= INTEGER(0..97)

RSRQ-Range ::= INTEGER(0..34)

RSRP-Range-Ext ::= INTEGER(-17..-1)

RSRQ-Range-Ext ::= INTEGER(-30..46)

RS-SINR-Range ::= INTEGER(0..127)

ServingInformation5G ::= SEQUENCE {
  trackingAreaCode  TrackingAreaCodeNR,
  ...
}

NeighbourInformation5G ::= SEQUENCE {
  trackingAreaCode  TrackingAreaCodeNR  OPTIONAL,
  ...
}

maxCellReport INTEGER ::= 8

WlanAPInformation ::= SEQUENCE { -- as per [IEEE 802.11]
  apMACAddress BIT STRING(SIZE (48)), -- AP MAC Address
  apTransmitPower INTEGER(-127..128) OPTIONAL, -- AP transmit power in dbm
  apAntennaGain  INTEGER(-127..128) OPTIONAL, -- AP antenna gain in dBi
  apSignaltoNoise  INTEGER(-127..128) OPTIONAL, -- AP S/N received at SET
  apDeviceType ENUMERATED {
    wlan802-11a(0), wlan802-11b(1), wlan802-11g(2),
    ...,
    wlan802-11n(3), wlan802-11ac(4), wlan802-11ad(5)
  } OPTIONAL,
  apSignalStrength  INTEGER(-127..128) OPTIONAL, -- AP signal strength at SET
  apChannelFrequency INTEGER(0..256) OPTIONAL, -- AP channel/frequency of Tx/Rx
  apRoundTripDelay  RTD OPTIONAL, -- Round Trip Delay between SET and AP
  setTransmitPower INTEGER(-127..128) OPTIONAL, -- SET transmit power in dBm
  setAntennaGain  INTEGER (-127..128) OPTIONAL, -- SET antenna gain in dBi
  setSignaltoNoise INTEGER (-127..128) OPTIONAL, -- SET S/N received at AP
  setSignalStrength INTEGER(-127..128) OPTIONAL, -- SET signal strength at AP
  apReportedLocation ReportedLocation OPTIONAL, -- AP Location reported by AP (legacy encoding)
  ...,
  apRepLocation  RepLocation OPTIONAL, -- AP Location reported by AP
  apSignalStrengthDelta  INTEGER (0..1) OPTIONAL, -- see Table 41
  apSignaltoNoiseDelta INTEGER (0..1) OPTIONAL, -- see Table 41
  setSignalStrengthDelta INTEGER (0..1) OPTIONAL, -- see Table 41
  setSignaltoNoiseDelta  INTEGER (0..1) OPTIONAL, -- see Table 41
  operatingClass INTEGER (0..255) OPTIONAL,
  apSSID  OCTET STRING (SIZE (1..32)) OPTIONAL,
  apPHYType ENUMERATED {
    unknown(0), any(1), fhss(2), dsss(3), irbaseband(4),
    ofdm(5), hrdsss(6), erp(7), ht(8), ihv(9),
    ...
  } OPTIONAL,
  setMACAddress BIT STRING(SIZE (48)) OPTIONAL -- MAC Address used by SET to connect to AP
}

RTD ::= SEQUENCE { -- as per [IEEE 802.11]
  rTDValue  INTEGER(0..16777216), -- measured RTD value corresponding to
  -- about 500km in units of 1/10 of nanoseconds
  rTDUnits RTDUnits, -- units of RTD
  rTDAccuracy INTEGER(0..255) OPTIONAL, -- RTD accuracy
  ...
}

RTDUnits ::= ENUMERATED {
  microseconds(0), hundredsofnanoseconds(1), tensofnanoseconds(2),
  nanoseconds(3), tenthsofnanoseconds(4),
  ...
}

ReportedLocation ::= SEQUENCE { -- as per [IEEE 802.11v]
  locationEncodingDescriptor LocationEncodingDescriptor,
  locationData  LocationData, -- location data field
  ...
}

LocationEncodingDescriptor ::= ENUMERATED { lci(0), asn1(1), ...}

LocationData ::= SEQUENCE {
  locationAccuracy  INTEGER(0..4294967295) OPTIONAL,
  locationValue  OCTET STRING (SIZE(1..128)),
  ...
}

RepLocation ::= CHOICE {
  lciLocData  LciLocData, -- location data field as per [IEEE 802.11] and [RFC 3825]
  ... -- future formats may be added here
}

LciLocData ::= SEQUENCE {
  locationDataLCI LocationDataLCI OPTIONAL,
  ...
}

LocationDataLCI ::= SEQUENCE {
  latitudeResolution  BIT STRING (SIZE (6)),
  latitude  BIT STRING (SIZE (34)),
  longitudeResolution BIT STRING (SIZE (6)),
  longitude BIT STRING (SIZE (34)),
  altitudeType  BIT STRING (SIZE (4)),
  altitudeResolution  BIT STRING (SIZE (6)),
  altitude  BIT STRING (SIZE (30)),
  datum BIT STRING (SIZE (8)),
  ...
}

WimaxBSInformation ::= SEQUENCE {
  wimaxBsID WimaxBsID,  -- WiMax serving base station ID
  wimaxRTD  WimaxRTD  OPTIONAL, -- Round Trip Delay measurements
  wimaxNMRList WimaxNMRList OPTIONAL, -- Network measurements
  ...
}

WimaxBsID ::= SEQUENCE {
  bsID-MSB  BIT STRING (SIZE(24)) OPTIONAL,
  bsID-LSB  BIT STRING (SIZE(24)),
  ...
}
-- if only LSB is present, MSB is assumed to be identical to the current serving BS or clamped on network value

WimaxRTD ::= SEQUENCE {
  rtd INTEGER (0..65535), -- Round trip delay of serving BS in units of 10 ns
  rTDstd INTEGER (0..1023) OPTIONAL, -- Standard deviation of round trip delay in units of 10 ns
  ...
}

WimaxNMRList ::= SEQUENCE (SIZE (1..maxWimaxBSMeas)) OF WimaxNMR

WimaxNMR ::= SEQUENCE {
  wimaxBsID WimaxBsID,  -- WiMax BS ID for the measurement
  relDelay INTEGER (-32768..32767) OPTIONAL, -- Relative delay for this neighbouring BSs to the serving cell in units of 10 ns
  relDelaystd INTEGER (0..1023) OPTIONAL, -- Standard deviation of Relative delay in units of 10 ns
  rssi  INTEGER (0..255) OPTIONAL, -- RSSI in 0.25 dBm steps, starting from -103.75 dBm
  rSSIstd INTEGER (0..63) OPTIONAL, -- Standard deviation of RSSI in dB
  bSTxPower INTEGER (0..255) OPTIONAL, -- BS transmit power in 0.25 dBm steps, starting from -103.75 dBm
  cinr  INTEGER (0..255) OPTIONAL, -- in dB
  cINRstd INTEGER (0..63) OPTIONAL, -- Standard deviation of CINR in dB
  bSLocation ReportedLocation OPTIONAL, -- Reported location of the BS
  ...
}

maxWimaxBSMeas INTEGER ::= 32

NRCellInformation ::= SEQUENCE {
  servingCellInformation  ServingCellInformationNR, --Serving cell information
  measuredResultsListNR MeasResultListNR  OPTIONAL, --Neighbour measurements
  ...
  }

-- Information for serving cells per 3GPP TS 38.331

ServingCellInformationNR ::= SEQUENCE (SIZE (1..maxNRServingCell)) OF ServCellNR
-- The first listed serving cell shall be the primary cell

ServCellNR ::= SEQUENCE {
  physCellId  PhysCellIdNR,
  arfcn-NR  ARFCN-NR,
  cellGlobalId  CellGlobalIdNR,
  trackingAreaCode  TrackingAreaCodeNR,
  ssb-Measurements  NR-Measurements OPTIONAL,
  csi-rs-Measurements NR-Measurements OPTIONAL,
  ta  INTEGER(0..3846) OPTIONAL, --Timing Advance value
  ...,
  arfcn-type  ENUMERATED {ssb, csi-rs}  OPTIONAL,
  systemFrameNumber BIT STRING (SIZE (10))  OPTIONAL,
  ssb-IndexList-Measurements  SSB-IndexList-Measurements    OPTIONAL,
  csi-rs-IndexList-Measurements CSI-RS-IndexList-Measurements OPTIONAL
}

-- Measured results of neighbours cells per 3GPP TS 38.331
MeasResultListNR ::= SEQUENCE (SIZE (1..maxCellReportNR)) OF MeasResultNR

MeasResultNR ::= SEQUENCE {
  physCellId  PhysCellIdNR,
  arfcn-NR  ARFCN-NR,
  cellGlobalId  CellGlobalIdNR  OPTIONAL,
  trackingAreaCode  TrackingAreaCodeNR  OPTIONAL,
  ssb-Measurements  NR-Measurements OPTIONAL,
  csi-rs-Measurements NR-Measurements OPTIONAL,
  ...,
  arfcn-type  ENUMERATED {ssb, csi-rs}  OPTIONAL,
  systemFrameNumber BIT STRING (SIZE (10))  OPTIONAL,
  ssb-IndexList-Measurements  SSB-IndexList-Measurements    OPTIONAL,
  csi-rs-IndexList-Measurements CSI-RS-IndexList-Measurements OPTIONAL
}

PhysCellIdNR ::= INTEGER (0..1007)

ARFCN-NR ::= INTEGER (0.. 3279165)

TrackingAreaCodeNR ::= BIT STRING (SIZE (24))

CellGlobalIdNR ::= SEQUENCE {
  plmn-Identity PLMN-Identity,
  cellIdentityNR CellIdentityNR,
  ...
}

CellIdentityNR ::= BIT STRING (SIZE (36))

NR-Measurements ::=  SEQUENCE {
  rsrp-Range    INTEGER (0..127)    OPTIONAL,
  rsrq-Range    INTEGER (0..127)    OPTIONAL,
  sinr-Range     INTEGER (0..127)     OPTIONAL,
  ...
}

SSB-IndexList-Measurements ::= SEQUENCE (SIZE (1..64)) OF SSB-Index-Measurements

SSB-Index-Measurements ::= SEQUENCE {
  ssb-Index-r16 INTEGER (0..63),
  ssb-Measurements  NR-Measurements
}

CSI-RS-IndexList-Measurements ::= SEQUENCE (SIZE (1..64)) OF CSI-RS-Index-Measurements

CSI-RS-Index-Measurements ::= SEQUENCE {
  csi-rs-Index  INTEGER (0..95),
  csi-rs-Measurements NR-Measurements
}

maxNRServingCell INTEGER ::= 32

maxCellReportNR INTEGER ::= 32

UTRAN-GPSReferenceTimeAssistance ::= SEQUENCE {
  utran-GPSReferenceTime  UTRAN-GPSReferenceTime,
  gpsReferenceTimeUncertainty INTEGER (0..127) OPTIONAL,
  utranGPSDriftRate UTRANGPSDriftRate OPTIONAL
}

UTRAN-GPSReferenceTime ::= SEQUENCE {
  -- For utran-GPSTimingOfCell values above 2322431999999 are not used in this version of the specification. Actual value utran-GPSTimingOfCell = (ms-part * 4294967296) + ls-part used on the downlink i.e. sent from the SLP to the SET
  utran-GPSTimingOfCell SEQUENCE {
    ms-part  INTEGER (0..1023),
    ls-part INTEGER (0..4294967295)
  },
  modeSpecificInfo  CHOICE {
    fdd SEQUENCE {
      referenceIdentity PrimaryCPICH-Info
    },
    tdd SEQUENCE {
      referenceIdentity CellParametersID
    }
  } OPTIONAL,
  sfn  INTEGER (0..4095)
}

UTRANGPSDriftRate ::= ENUMERATED {
  utran-GPSDrift0, utran-GPSDrift1, utran-GPSDrift2,
  utran-GPSDrift5, utran-GPSDrift10, utran-GPSDrift15,
  utran-GPSDrift25, utran-GPSDrift50, utran-GPSDrift-1,
  utran-GPSDrift-2, utran-GPSDrift-5, utran-GPSDrift-10,
  utran-GPSDrift-15, utran-GPSDrift-25, utran-GPSDrift-50
}

UTRAN-GPSReferenceTimeResult ::= SEQUENCE {
  -- For ue-GPSTimingOfCell values above 37158911999999 are not used in this version of the specification. Actual value utran-GPSTimingOfCell = (ms-part * 4294967296) + ls-part used on the uplink i.e. reported by the SET to the SLP
  set-GPSTimingOfCell SEQUENCE {
    ms-part  INTEGER (0.. 16383),
    ls-part INTEGER (0..4294967295)
  },
  modeSpecificInfo  CHOICE {
    fdd SEQUENCE {
      referenceIdentity PrimaryCPICH-Info
    },
    tdd SEQUENCE {
      referenceIdentity CellParametersID
    }
  } OPTIONAL,
  sfn  INTEGER (0..4095),
  gpsReferenceTimeUncertainty INTEGER (0..127) OPTIONAL,
  ...
}

UTRAN-GANSSReferenceTimeAssistance ::= SEQUENCE {
  ganssDay INTEGER (0..8191) OPTIONAL,
  ganssTimeID INTEGER (0..15),
  utran-GANSSReferenceTime  UTRAN-GANSSReferenceTime,
  utranGANSSDriftRate UTRANGANSSDriftRate OPTIONAL
}

UTRAN-GANSSReferenceTime ::= SEQUENCE {
  ganssTOD INTEGER (0..86399),
  utran-GANSSTimingOfCell INTEGER (0..3999999) OPTIONAL,
  modeSpecificInfo  CHOICE {
    fdd SEQUENCE {
      referenceIdentity PrimaryCPICH-Info
    },
    tdd SEQUENCE {
      referenceIdentity CellParametersID
    }
  } OPTIONAL,
  sfn  INTEGER (0..4095),
  ganss-TODUncertainty INTEGER (0..127) OPTIONAL,
  ...
}

UTRANGANSSDriftRate ::= ENUMERATED {
  utran-GANSSDrift0, utran-GANSSDrift1, utran-GANSSDrift2,
  utran-GANSSDrift5, utran-GANSSDrift10, utran-GANSSDrift15,
  utran-GANSSDrift25, utran-GANSSDrift50,
  utran-GANSSDrift-1, utran-GANSSDrift-2, utran-GANSSDrift-5,
  utran-GANSSDrift-10, utran-GANSSDrift-15, utran-GANSSDrift-25,
  utran-GANSSDrift-50}

UTRAN-GANSSReferenceTimeResult ::= SEQUENCE {
  ganssTimeID INTEGER (0..15),
  set-GANSSReferenceTime  SET-GANSSReferenceTime,
  ...
}

SET-GANSSReferenceTime ::= SEQUENCE {
  -- Actual value [ns] = (ms-Part * 4294967296 + ls-Part) * 250
  -- Actual values [ns] > 86399999999750 are reserved and are considered a
  -- protocol error
  set-GANSSTimingOfCell SEQUENCE {
    ms-part INTEGER (0..80),
    ls-part INTEGER (0..4294967295)
  } OPTIONAL,
  modeSpecificInfo  CHOICE {
    fdd SEQUENCE {
      referenceIdentity PrimaryCPICH-Info
    },
    tdd SEQUENCE {
      referenceIdentity CellParametersID
    }
  } OPTIONAL,
  sfn  INTEGER (0..4095),
  ganss-TODUncertainty INTEGER (0..127) OPTIONAL,
  ...
}

GNSSPosTechnology ::= SEQUENCE {
  gps  BOOLEAN,
  galileo BOOLEAN,
  sbas  BOOLEAN,
  modernized-gps  BOOLEAN,
  qzss  BOOLEAN,
  glonass BOOLEAN,
  ...,
  bds BOOLEAN OPTIONAL,
  rtk-osr BOOLEAN OPTIONAL
}

-- indicates MS support for particular GANSS signals and frequencies coding according to parameter definition in section 10.9

GANSSSignals ::= BIT STRING {
  signal1 (0),
  signal2 (1),
  signal3 (2),
  signal4 (3),
  signal5 (4),
  signal6 (5),
  signal7 (6),
  signal8 (7)
} (SIZE (1..8))

SPCSETKey ::= BIT STRING(SIZE (128))

SPCTID ::= SEQUENCE {
  rand  BIT STRING(SIZE (128)),
  slpFQDN FQDN,
  ...
}

SPCSETKeylifetime ::= INTEGER (1..24) -- units in hours

CauseCode ::= ENUMERATED {
  servingNetWorkNotInAreaIdList(0),
  sETCapabilitiesChanged(1),
  noSUPLCoverage(2),
  ...
}

ThirdParty ::= SEQUENCE (SIZE (1..64)) OF ThirdPartyID

ThirdPartyID ::= CHOICE {
  logicalName IA5String(SIZE (1..1000)),
  msisdn OCTET STRING(SIZE (8)),
  emailaddr IA5String(SIZE (1..1000)),
  sip-uri VisibleString(FROM ("a".."z" | "A".."Z" | "0".."9" | ":./-_~%#@?")) (SIZE (1..255)),
  ims-public-identity VisibleString(FROM ("a".."z" | "A".."Z" | "0".."9" | ":./-_~%#@?")) (SIZE (1..255)),
  min BIT STRING(SIZE (34)), -- coded according to TIA-553
  mdn  OCTET STRING(SIZE (8)),
  uri VisibleString(FROM ("a".."z" | "A".."Z" | "0".."9" | "./-_~%#")) (SIZE (1..255)),
  ...
}

ApplicationID ::= SEQUENCE {
  appProvider IA5String(SIZE (1..24)), -- The application provider
  appName IA5String(SIZE (1..32)), -- The application name
  appVersion IA5String(SIZE (1..8)) OPTIONAL, -- The application version
  ...
}

ReportingCap ::= SEQUENCE {
  minInt INTEGER (1..3600), -- units in seconds
  maxInt INTEGER (1..1440) OPTIONAL, -- units in minutes repMode  RepMode,
  batchRepCap BatchRepCap OPTIONAL, -- only used for batch and quasi real time reporting
  ...
}

RepMode ::= SEQUENCE {
  realtime  BOOLEAN,
  quasirealtime BOOLEAN,
  batch BOOLEAN,
  ...
}

BatchRepCap ::= SEQUENCE {
  report-position BOOLEAN, -- set to "true" if reporting of position is supported
  report-measurements BOOLEAN, -- set to "true" if reporting of measurements is supported
  max-num-positions INTEGER (1..1024) OPTIONAL,
  max-num-measurements INTEGER (1..1024) OPTIONAL,
  ...
}

Coordinate::= SEQUENCE {
  latitudeSign  ENUMERATED {north(0), south(1)},
  latitude INTEGER(0..8388607),
  longitude INTEGER(-8388608..8388607)
} -- Coding as in [3GPP GAD]

CircularArea ::= SEQUENCE {
  coordinate  Coordinate,
  radius  INTEGER(1..1000000), -- radius in meters
  radius-min  INTEGER(1..1000000) OPTIONAL, -- hysteresis minimum radius
  radius-max  INTEGER(1..1500000) OPTIONAL -- hysteresis maximum radius
}

EllipticalArea ::= SEQUENCE {
  coordinate  Coordinate,
  semiMajor INTEGER(1..1000000), -- units in meters
  semiMajor-min INTEGER(1..1000000) OPTIONAL, -- hysteresis minimum semiMajor
  semiMajor-max INTEGER(1..1500000) OPTIONAL, -- hysteresis maximum semiMajor
  semiMinor INTEGER(1..1000000), -- units in meters
  semiMinor-min INTEGER(1..1000000) OPTIONAL, -- hysteresis minimum semiMinor
  semiMinor-max INTEGER(1..1500000) OPTIONAL, -- hysteresis maximum semiMinor
  angle INTEGER(0.. 179) -- units in degrees. The angle is defined as the angle between the semi-major axis and North, increasing in a clockwise direction. An angle of 0 represents an ellipse with the semi-major axis pointing North/South while an angle of 90 represents an ellipse with the semi-major axis pointing East/West.
}

PolygonArea ::= SEQUENCE {
  polygonDescription PolygonDescription,
  polygonHysteresis INTEGER(1..100000) OPTIONAL --units in meters
}

PolygonDescription ::= SEQUENCE (SIZE (3..15)) OF Coordinate

Ver2-HighAccuracyPosition ::= SEQUENCE {
  timestamp UTCTime, -- shall include seconds and shall use UTC time.
  highAccuracyPositionEstimate  HighAccuracyPositionEstimate,
  velocity  Velocity OPTIONAL,
  ...
}

HighAccuracyPositionEstimate ::= SEQUENCE {
  degreesLatitude INTEGER(-2147483648..2147483647),
  degreesLongitude  INTEGER(-2147483648..2147483647),
  uncertaintySemiMajor  INTEGER (0..255),
  uncertaintySemiMinor  INTEGER (0..255),
  orientationMajorAxis  INTEGER (0..179),
  horizontalConfidence  INTEGER (0..100),
  highAccuracyAltitudeInfo  HighAccuracyAltitudeInfo OPTIONAL,
  ...
} -- Coding as in [3GPP GAD]

HighAccuracyAltitudeInfo ::= SEQUENCE {
  altitude  INTEGER(64000..1280000),
  uncertaintyAltitude INTEGER (0..255),
  verticalConfidence  INTEGER (0..100),
  ...
} -- Coding as in [3GPP GAD]

END