STP_MODE_TYPE_DISABLED STP_MODE_TYPE_PASSTHROUGH STP_MODE_TYPE_STP STP_MODE_TYPE_RSTP STP_MODE_TYPE_MSTP Sets the STP mode.

Gets the STP mode.

Sets the forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spanning tree topology. The default value is 15 seconds, and the valid range is 4-30 seconds. Note that this parameter has no effect when the STP mode is RSPT or MSTP, as long as all bridges in the spanning tree use the RSTP or MSTP protocol.

Gets the forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spanning tree topology. The default value is 15 seconds, and the valid range is 4-30 seconds. Note that this parameter has no effect when the STP mode is RSPT or MSTP, as long as all bridges in the spanning tree use the RSTP or MSTP protocol.

Sets the hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacent bridges in the network. The default value is 2 seconds, and the valid range is 1-10 seconds.

Gets the hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacent bridges in the network. The default value is 2 seconds, and the valid range is 1-10 seconds.

Sets the maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is 20 seconds, and the valid range is 6-40 seconds.

Gets the maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is 20 seconds, and the valid range is 6-40 seconds.

Sets the transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in any hello time interval. This ensures that the spanning tree packets will not unduly load the network even in unstable conditions. The default value is 6 packets, and the valid range is 1-10 packets.

Gets the transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in any hello time interval. This ensures that the spanning tree packets will not unduly load the network even in unstable conditions. The default value is 6 packets, and the valid range is 1-10 packets.

Sets the maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Gets the maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Sets the configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, configuration revision levels, and assignments of VLANs to spanning tree instances. This setting is used only when the STP mode is MSTP, however the user may set it in any STP mode.

Gets the configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, configuration revision levels, and assignments of VLANs to spanning tree instances. This setting is used only when the STP mode is MSTP, however the user may set it in any STP mode.

Sets the configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Gets the configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Sets the STP global description. This is an arbitrary field which can be used for any purpose.

Gets the STP global description.

Gets the version information for this interface.

Sets the STP mode.

Gets the STP mode.

Sets the forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spanning tree topology. The default value is 15 seconds, and the valid range is 4-30 seconds. Note that this parameter has no effect when the STP mode is RSPT or MSTP, as long as all bridges in the spanning tree use the RSTP or MSTP protocol.

Gets the forward delay parameter, which controls how long an interface was blocked from forwarding network traffic after a reconfiguration of the spanning tree topology. The default value is 15 seconds, and the valid range is 4-30 seconds. Note that this parameter has no effect when the STP mode is RSPT or MSTP, as long as all bridges in the spanning tree use the RSTP or MSTP protocol.

Sets the hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacent bridges in the network. The default value is 2 seconds, and the valid range is 1-10 seconds.

Gets the hello time, which is the time interval in seconds between the periodic transmissions that communicate spanning tree information to the adjacent bridges in the network. The default value is 2 seconds, and the valid range is 1-10 seconds.

Sets the maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is 20 seconds, and the valid range is 6-40 seconds.

Gets the maximum age parameter, which controls how long spanning tree information received from other bridges is considered valid. The default value is 20 seconds, and the valid range is 6-40 seconds.

Sets the transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in any hello time interval. This ensures that the spanning tree packets will not unduly load the network even in unstable conditions. The default value is 6 packets, and the valid range is 1-10 packets.

Gets the transmit hold count parameter, which is an absolute limit on the number of spanning tree protocol packets the BIG-IP may transmit on a port in any hello time interval. This ensures that the spanning tree packets will not unduly load the network even in unstable conditions. The default value is 6 packets, and the valid range is 1-10 packets.

Sets the maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Gets the maximum hops an MSTP packet may travel before it is discarded. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Sets the configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, configuration revision levels, and assignments of VLANs to spanning tree instances. This setting is used only when the STP mode is MSTP, however the user may set it in any STP mode.

Gets the configuration identifier name in a spanning tree region, used to identify a group of adjacent bridges with identical configuration name, configuration revision levels, and assignments of VLANs to spanning tree instances. This setting is used only when the STP mode is MSTP, however the user may set it in any STP mode.

Sets the configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Gets the configuration revision level of the MSTP configuration. It's used only when the STP mode is MSTP, however, the user may set it in any STP mode.

Sets the STP global description. This is an arbitrary field which can be used for any purpose.

Gets the STP global description.

Gets the version information for this interface.

The STPGlobals interface enables you to work with global attributes used to configure STP (Spanning Tree Protocol).