# Copyright 2019 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


module Google
  module Cloud
    module Scheduler
      module V1beta1
        # Http target. The job will be pushed to the job handler by means of
        # an HTTP request via an {Google::Cloud::Scheduler::V1beta1::HttpTarget#http_method http_method} such as HTTP
        # POST, HTTP GET, etc. The job is acknowledged by means of an HTTP
        # response code in the range [200 - 299]. A failure to receive a response
        # constitutes a failed execution. For a redirected request, the response
        # returned by the redirected request is considered.
        # @!attribute [rw] uri
        #   @return [String]
        #     Required. The full URI path that the request will be sent to. This string
        #     must begin with either "http://" or "https://". Some examples of
        #     valid values for {Google::Cloud::Scheduler::V1beta1::HttpTarget#uri uri} are:
        #     `http://acme.com` and `https://acme.com/sales:8080`. Cloud Scheduler will
        #     encode some characters for safety and compatibility. The maximum allowed
        #     URL length is 2083 characters after encoding.
        # @!attribute [rw] http_method
        #   @return [Google::Cloud::Scheduler::V1beta1::HttpMethod]
        #     Which HTTP method to use for the request.
        # @!attribute [rw] headers
        #   @return [Hash{String => String}]
        #     The user can specify HTTP request headers to send with the job's
        #     HTTP request. This map contains the header field names and
        #     values. Repeated headers are not supported, but a header value can
        #     contain commas. These headers represent a subset of the headers
        #     that will accompany the job's HTTP request. Some HTTP request
        #     headers will be ignored or replaced. A partial list of headers that
        #     will be ignored or replaced is below:
        #     * Host: This will be computed by Cloud Scheduler and derived from
        #       {Google::Cloud::Scheduler::V1beta1::HttpTarget#uri uri}.
        #     * `Content-Length`: This will be computed by Cloud Scheduler.
        #     * `User-Agent`: This will be set to `"Google-Cloud-Scheduler"`.
        #     * `X-Google-*`: Google internal use only.
        #     * `X-AppEngine-*`: Google internal use only.
        #
        #     The total size of headers must be less than 80KB.
        # @!attribute [rw] body
        #   @return [String]
        #     HTTP request body. A request body is allowed only if the HTTP
        #     method is POST, PUT, or PATCH. It is an error to set body on a job with an
        #     incompatible {Google::Cloud::Scheduler::V1beta1::HttpMethod HttpMethod}.
        # @!attribute [rw] oauth_token
        #   @return [Google::Cloud::Scheduler::V1beta1::OAuthToken]
        #     If specified, an
        #     [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
        #     will be generated and attached as an `Authorization` header in the HTTP
        #     request.
        #
        #     This type of authorization should generally only be used when calling
        #     Google APIs hosted on *.googleapis.com.
        # @!attribute [rw] oidc_token
        #   @return [Google::Cloud::Scheduler::V1beta1::OidcToken]
        #     If specified, an
        #     [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
        #     token will be generated and attached as an `Authorization` header in the
        #     HTTP request.
        #
        #     This type of authorization can be used for many scenarios, including
        #     calling Cloud Run, or endpoints where you intend to validate the token
        #     yourself.
        class HttpTarget; end

        # App Engine target. The job will be pushed to a job handler by means
        # of an HTTP request via an {Google::Cloud::Scheduler::V1beta1::AppEngineHttpTarget#http_method http_method} such
        # as HTTP POST, HTTP GET, etc. The job is acknowledged by means of an
        # HTTP response code in the range [200 - 299]. Error 503 is
        # considered an App Engine system error instead of an application
        # error. Requests returning error 503 will be retried regardless of
        # retry configuration and not counted against retry counts. Any other
        # response code, or a failure to receive a response before the
        # deadline, constitutes a failed attempt.
        # @!attribute [rw] http_method
        #   @return [Google::Cloud::Scheduler::V1beta1::HttpMethod]
        #     The HTTP method to use for the request. PATCH and OPTIONS are not
        #     permitted.
        # @!attribute [rw] app_engine_routing
        #   @return [Google::Cloud::Scheduler::V1beta1::AppEngineRouting]
        #     App Engine Routing setting for the job.
        # @!attribute [rw] relative_uri
        #   @return [String]
        #     The relative URI.
        #
        #     The relative URL must begin with "/" and must be a valid HTTP relative URL.
        #     It can contain a path, query string arguments, and `#` fragments.
        #     If the relative URL is empty, then the root path "/" will be used.
        #     No spaces are allowed, and the maximum length allowed is 2083 characters.
        # @!attribute [rw] headers
        #   @return [Hash{String => String}]
        #     HTTP request headers.
        #
        #     This map contains the header field names and values. Headers can be set
        #     when the job is created.
        #
        #     Cloud Scheduler sets some headers to default values:
        #
        #     * `User-Agent`: By default, this header is
        #       `"AppEngine-Google; (+http://code.google.com/appengine)"`.
        #       This header can be modified, but Cloud Scheduler will append
        #       `"AppEngine-Google; (+http://code.google.com/appengine)"` to the
        #       modified `User-Agent`.
        #     * `X-CloudScheduler`: This header will be set to true.
        #
        #     If the job has an {Google::Cloud::Scheduler::V1beta1::AppEngineHttpTarget#body body}, Cloud Scheduler sets
        #     the following headers:
        #
        #     * `Content-Type`: By default, the `Content-Type` header is set to
        #       `"application/octet-stream"`. The default can be overridden by explictly
        #       setting `Content-Type` to a particular media type when the job is
        #       created.
        #       For example, `Content-Type` can be set to `"application/json"`.
        #     * `Content-Length`: This is computed by Cloud Scheduler. This value is
        #       output only. It cannot be changed.
        #
        #     The headers below are output only. They cannot be set or overridden:
        #
        #     * `X-Google-*`: For Google internal use only.
        #     * `X-AppEngine-*`: For Google internal use only.
        #
        #     In addition, some App Engine headers, which contain
        #     job-specific information, are also be sent to the job handler.
        # @!attribute [rw] body
        #   @return [String]
        #     Body.
        #
        #     HTTP request body. A request body is allowed only if the HTTP method is
        #     POST or PUT. It will result in invalid argument error to set a body on a
        #     job with an incompatible {Google::Cloud::Scheduler::V1beta1::HttpMethod HttpMethod}.
        class AppEngineHttpTarget; end

        # Pub/Sub target. The job will be delivered by publishing a message to
        # the given Pub/Sub topic.
        # @!attribute [rw] topic_name
        #   @return [String]
        #     Required. The name of the Cloud Pub/Sub topic to which messages will
        #     be published when a job is delivered. The topic name must be in the
        #     same format as required by PubSub's
        #     [PublishRequest.name](https://cloud.google.com/pubsub/docs/reference/rpc/google.pubsub.v1#publishrequest),
        #     for example `projects/PROJECT_ID/topics/TOPIC_ID`.
        #
        #     The topic must be in the same project as the Cloud Scheduler job.
        # @!attribute [rw] data
        #   @return [String]
        #     The message payload for PubsubMessage.
        #
        #     Pubsub message must contain either non-empty data, or at least one
        #     attribute.
        # @!attribute [rw] attributes
        #   @return [Hash{String => String}]
        #     Attributes for PubsubMessage.
        #
        #     Pubsub message must contain either non-empty data, or at least one
        #     attribute.
        class PubsubTarget; end

        # App Engine Routing.
        #
        # For more information about services, versions, and instances see
        # [An Overview of App
        # Engine](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine),
        # [Microservices Architecture on Google App
        # Engine](https://cloud.google.com/appengine/docs/python/microservices-on-app-engine),
        # [App Engine Standard request
        # routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed),
        # and [App Engine Flex request
        # routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
        # @!attribute [rw] service
        #   @return [String]
        #     App service.
        #
        #     By default, the job is sent to the service which is the default
        #     service when the job is attempted.
        # @!attribute [rw] version
        #   @return [String]
        #     App version.
        #
        #     By default, the job is sent to the version which is the default
        #     version when the job is attempted.
        # @!attribute [rw] instance
        #   @return [String]
        #     App instance.
        #
        #     By default, the job is sent to an instance which is available when
        #     the job is attempted.
        #
        #     Requests can only be sent to a specific instance if
        #     [manual scaling is used in App Engine
        #     Standard](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine?hl=en_US#scaling_types_and_instance_classes).
        #     App Engine Flex does not support instances. For more information, see
        #     [App Engine Standard request
        #     routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
        #     and [App Engine Flex request
        #     routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
        # @!attribute [rw] host
        #   @return [String]
        #     Output only. The host that the job is sent to.
        #
        #     For more information about how App Engine requests are routed, see
        #     [here](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed).
        #
        #     The host is constructed as:
        #
        #
        #     * `host = [application_domain_name]`</br>
        #       `| [service] + '.' + [application_domain_name]`</br>
        #       `| [version] + '.' + [application_domain_name]`</br>
        #       `| [version_dot_service]+ '.' + [application_domain_name]`</br>
        #       `| [instance] + '.' + [application_domain_name]`</br>
        #       `| [instance_dot_service] + '.' + [application_domain_name]`</br>
        #       `| [instance_dot_version] + '.' + [application_domain_name]`</br>
        #       `| [instance_dot_version_dot_service] + '.' + [application_domain_name]`
        #
        #     * `application_domain_name` = The domain name of the app, for
        #       example <app-id>.appspot.com, which is associated with the
        #       job's project ID.
        #
        #     * `service =` {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service}
        #
        #     * `version =` {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version}
        #
        #     * `version_dot_service =`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version} `+ '.' +`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service}
        #
        #     * `instance =` {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance}
        #
        #     * `instance_dot_service =`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance} `+ '.' +`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service}
        #
        #     * `instance_dot_version =`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance} `+ '.' +`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version}
        #
        #     * `instance_dot_version_dot_service =`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance} `+ '.' +`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version} `+ '.' +`
        #       {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service}
        #
        #
        #     If {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service} is empty, then the job will be sent
        #     to the service which is the default service when the job is attempted.
        #
        #     If {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version} is empty, then the job will be sent
        #     to the version which is the default version when the job is attempted.
        #
        #     If {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance} is empty, then the job will be
        #     sent to an instance which is available when the job is attempted.
        #
        #     If {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#service service},
        #     {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#version version}, or
        #     {Google::Cloud::Scheduler::V1beta1::AppEngineRouting#instance instance} is invalid, then the job will be sent
        #     to the default version of the default service when the job is attempted.
        class AppEngineRouting; end

        # Contains information needed for generating an
        # [OAuth token](https://developers.google.com/identity/protocols/OAuth2).
        # This type of authorization should generally only be used when calling Google
        # APIs hosted on *.googleapis.com.
        # @!attribute [rw] service_account_email
        #   @return [String]
        #     [Service account email](https://cloud.google.com/iam/docs/service-accounts)
        #     to be used for generating OAuth token.
        #     The service account must be within the same project as the job. The caller
        #     must have iam.serviceAccounts.actAs permission for the service account.
        # @!attribute [rw] scope
        #   @return [String]
        #     OAuth scope to be used for generating OAuth access token.
        #     If not specified, "https://www.googleapis.com/auth/cloud-platform"
        #     will be used.
        class OAuthToken; end

        # Contains information needed for generating an
        # [OpenID Connect
        # token](https://developers.google.com/identity/protocols/OpenIDConnect).
        # This type of authorization can be used for many scenarios, including
        # calling Cloud Run, or endpoints where you intend to validate the token
        # yourself.
        # @!attribute [rw] service_account_email
        #   @return [String]
        #     [Service account email](https://cloud.google.com/iam/docs/service-accounts)
        #     to be used for generating OIDC token.
        #     The service account must be within the same project as the job. The caller
        #     must have iam.serviceAccounts.actAs permission for the service account.
        # @!attribute [rw] audience
        #   @return [String]
        #     Audience to be used when generating OIDC token. If not specified, the URI
        #     specified in target will be used.
        class OidcToken; end

        # The HTTP method used to execute the job.
        module HttpMethod
          # HTTP method unspecified. Defaults to POST.
          HTTP_METHOD_UNSPECIFIED = 0

          # HTTP POST
          POST = 1

          # HTTP GET
          GET = 2

          # HTTP HEAD
          HEAD = 3

          # HTTP PUT
          PUT = 4

          # HTTP DELETE
          DELETE = 5

          # HTTP PATCH
          PATCH = 6

          # HTTP OPTIONS
          OPTIONS = 7
        end
      end
    end
  end
end