| Top | |
|
|
|
| GtkSourceGutterRendererAlignmentMode | alignment-mode | Read / Write / Construct |
| GdkRGBA * | background-rgba | Read / Write |
| gboolean | background-set | Read / Write / Construct |
| gint | size | Read / Write / Construct |
| GtkTextView * | view | Read |
| gboolean | visible | Read / Write / Construct |
| GtkTextWindowType | window-type | Read |
| gfloat | xalign | Read / Write / Construct |
| gint | xpad | Read / Write / Construct |
| gfloat | yalign | Read / Write / Construct |
| gint | ypad | Read / Write / Construct |
GEnum ╰── GtkSourceGutterRendererAlignmentMode GFlags ╰── GtkSourceGutterRendererState GObject ╰── GInitiallyUnowned ╰── GtkSourceGutterRenderer ├── GtkSourceGutterRendererPixbuf ╰── GtkSourceGutterRendererText
A GtkSourceGutterRenderer represents a column in a GtkSourceGutter. The column contains one cell for each visible line of the GtkTextBuffer. Due to text wrapping, a cell can thus span multiple lines of the GtkTextView. In this case, GtkSourceGutterRendererAlignmentMode controls the alignment of the cell.
The gutter renderer must announce its “size”. The height is determined by the text view height. The width must be determined by the gutter renderer. The width generally takes into account the entire text buffer. For instance, to display the line numbers, if the buffer contains 100 lines, the gutter renderer will always set its width such as three digits can be printed, even if only the first 20 lines are shown. Another strategy is to take into account only the visible lines. In this case, only two digits are necessary to display the line numbers of the first 20 lines. To take another example, the gutter renderer for GtkSourceMarks doesn't need to take into account the text buffer to announce its width. It only depends on the icons size displayed in the gutter column.
An horizontal and vertical padding can be added with
gtk_source_gutter_renderer_set_padding(). The total width of a gutter
renderer is its size (“size”) plus two times the
horizontal padding (“xpad”).
When the available size to render a cell is greater than the required size to
render the cell contents, the cell contents can be aligned horizontally and
vertically with gtk_source_gutter_renderer_set_alignment().
The cells rendering occurs in three phases:
begin: the gtk_source_gutter_renderer_begin() function is called when some
cells need to be redrawn. It provides the associated region of the
GtkTextBuffer. The cells need to be redrawn when the GtkTextView is
scrolled, or when the state of the cells change (see
GtkSourceGutterRendererState).
draw: gtk_source_gutter_renderer_draw() is called for each cell that needs
to be drawn.
end: finally, gtk_source_gutter_renderer_end() is called.
void gtk_source_gutter_renderer_begin (GtkSourceGutterRenderer *renderer,cairo_t *cr,GdkRectangle *background_area,GdkRectangle *cell_area,GtkTextIter *start,GtkTextIter *end);
Called when drawing a region begins. The region to be drawn is indicated
by start
and end
. The purpose is to allow the implementation to precompute
some state before the draw method is called for each cell.
void gtk_source_gutter_renderer_draw (GtkSourceGutterRenderer *renderer,cairo_t *cr,GdkRectangle *background_area,GdkRectangle *cell_area,GtkTextIter *start,GtkTextIter *end,GtkSourceGutterRendererState state);
Main renderering method. Implementations should implement this method to draw
onto the cairo context. The background_area
indicates the total area of the
cell to be drawn. The cell_area
indicates the area where content can be
drawn (text, images, etc).
The background_area
is the cell_area
plus the padding on each side (two
times the “xpad” horizontally and two times the
“ypad” vertically, so that the cell_area
is centered
inside background_area
).
The state
argument indicates the current state of the renderer and should
be taken into account to properly draw the different possible states
(cursor, prelit, selected) if appropriate.
renderer |
||
cr |
the cairo render context |
|
background_area |
a GdkRectangle indicating the total area to be drawn |
|
cell_area |
a GdkRectangle indicating the area to draw content |
|
start |
||
end |
||
state |
void
gtk_source_gutter_renderer_end (GtkSourceGutterRenderer *renderer);
Called when drawing a region of lines has ended.
GtkTextView *
gtk_source_gutter_renderer_get_view (GtkSourceGutterRenderer *renderer);
Get the view associated to the gutter renderer
GtkTextWindowType
gtk_source_gutter_renderer_get_window_type
(GtkSourceGutterRenderer *renderer);
Get the GtkTextWindowType associated with the gutter renderer.
gboolean
gtk_source_gutter_renderer_get_visible
(GtkSourceGutterRenderer *renderer);
Get whether the gutter renderer is visible.
void gtk_source_gutter_renderer_set_visible (GtkSourceGutterRenderer *renderer,gboolean visible);
Set whether the gutter renderer is visible.
gint
gtk_source_gutter_renderer_get_size (GtkSourceGutterRenderer *renderer);
Get the size of the renderer.
void gtk_source_gutter_renderer_set_size (GtkSourceGutterRenderer *renderer,gint size);
Sets the size of the renderer. A value of -1 specifies that the size is to be determined dynamically.
void gtk_source_gutter_renderer_get_padding (GtkSourceGutterRenderer *renderer,gint *xpad,gint *ypad);
Get the x-padding and y-padding of the gutter renderer.
void gtk_source_gutter_renderer_set_padding (GtkSourceGutterRenderer *renderer,gint xpad,gint ypad);
Set the padding of the gutter renderer. Both xpad
and ypad
can be
-1, which means the values will not be changed (this allows changing only
one of the values).
xpad
is the left and right padding. ypad
is the top and bottom padding.
void gtk_source_gutter_renderer_get_alignment (GtkSourceGutterRenderer *renderer,gfloat *xalign,gfloat *yalign);
Get the x-alignment and y-alignment of the gutter renderer.
void gtk_source_gutter_renderer_set_alignment (GtkSourceGutterRenderer *renderer,gfloat xalign,gfloat yalign);
Set the alignment of the gutter renderer. Both xalign
and yalign
can be
-1, which means the values will not be changed (this allows changing only
one of the values).
xalign
is the horizontal alignment. Set to 0 for a left alignment. 1 for a
right alignment. And 0.5 for centering the cells. yalign
is the vertical
alignment. Set to 0 for a top alignment. 1 for a bottom alignment.
GtkSourceGutterRendererAlignmentMode
gtk_source_gutter_renderer_get_alignment_mode
(GtkSourceGutterRenderer *renderer);
Get the alignment mode. The alignment mode describes the manner in which the renderer is aligned (see :xalign and :yalign).
void gtk_source_gutter_renderer_set_alignment_mode (GtkSourceGutterRenderer *renderer,GtkSourceGutterRendererAlignmentMode mode);
Set the alignment mode. The alignment mode describes the manner in which the renderer is aligned (see :xalign and :yalign).
gboolean gtk_source_gutter_renderer_get_background (GtkSourceGutterRenderer *renderer,GdkRGBA *color);
Get the background color of the renderer.
void gtk_source_gutter_renderer_set_background (GtkSourceGutterRenderer *renderer,const GdkRGBA *color);
Set the background color of the renderer. If color
is set to NULL, the
renderer will not have a background color.
void gtk_source_gutter_renderer_activate (GtkSourceGutterRenderer *renderer,GtkTextIter *iter,GdkRectangle *area,GdkEvent *event);
Emits the “activate” signal of the renderer. This is called from GtkSourceGutter and should never have to be called manually.
renderer |
||
iter |
a GtkTextIter at the start of the line where the renderer is activated |
|
area |
a GdkRectangle of the cell area where the renderer is activated |
|
event |
the event that triggered the activation |
gboolean gtk_source_gutter_renderer_query_activatable (GtkSourceGutterRenderer *renderer,GtkTextIter *iter,GdkRectangle *area,GdkEvent *event);
Get whether the renderer is activatable at the location in event
. This is
called from GtkSourceGutter to determine whether a renderer is activatable
using the mouse pointer.
renderer |
||
iter |
a GtkTextIter at the start of the line to be activated |
|
area |
a GdkRectangle of the cell area to be activated |
|
event |
the event that triggered the query |
void gtk_source_gutter_renderer_query_data (GtkSourceGutterRenderer *renderer,GtkTextIter *start,GtkTextIter *end,GtkSourceGutterRendererState state);
Emit the “query-data” signal. This function is called to query for data just before rendering a cell. This is called from the GtkSourceGutter. Implementations can override the default signal handler or can connect a signal handler externally to the “query-data” signal.
gboolean gtk_source_gutter_renderer_query_tooltip (GtkSourceGutterRenderer *renderer,GtkTextIter *iter,GdkRectangle *area,gint x,gint y,GtkTooltip *tooltip);
Emits the “query-tooltip” signal. This function is called from GtkSourceGutter. Implementations can override the default signal handler or can connect to the signal externally.
renderer |
||
iter |
a GtkTextIter. |
|
area |
a GdkRectangle. |
|
x |
The x position of the tooltip. |
|
y |
The y position of the tooltip. |
|
tooltip |
a GtkTooltip. |
void
gtk_source_gutter_renderer_queue_draw (GtkSourceGutterRenderer *renderer);
Emits the “queue-draw” signal of the renderer. Call this from an implementation to inform that the renderer has changed such that it needs to redraw.
“alignment-mode” property“alignment-mode” GtkSourceGutterRendererAlignmentMode
The alignment mode of the renderer. This can be used to indicate that in the case a cell spans multiple lines (due to text wrapping) the alignment should work on either the full cell, the first line or the last line.
Flags: Read / Write / Construct
Default value: GTK_SOURCE_GUTTER_RENDERER_ALIGNMENT_MODE_CELL
“background-rgba” property“background-rgba” GdkRGBA *
The background color.
Flags: Read / Write
“background-set” property“background-set” gboolean
Whether the background color is set.
Flags: Read / Write / Construct
Default value: FALSE
“size” property“size” gint
The size.
Flags: Read / Write / Construct
Allowed values: >= 0
Default value: 0
“visible” property“visible” gboolean
The visibility of the renderer.
Flags: Read / Write / Construct
Default value: TRUE
“window-type” property“window-type” GtkTextWindowType
The window type of the view on which the renderer is placed (left, or right).
Flags: Read
Default value: GTK_TEXT_WINDOW_PRIVATE
“xalign” property“xalign” gfloat
The horizontal alignment of the renderer. Set to 0 for a left alignment. 1 for a right alignment. And 0.5 for centering the cells. A value lower than 0 doesn't modify the alignment.
Flags: Read / Write / Construct
Allowed values: [-1,1]
Default value: 0
“xpad” property“xpad” gint
The left and right padding of the renderer.
Flags: Read / Write / Construct
Allowed values: >= -1
Default value: 0
“yalign” property“yalign” gfloat
The vertical alignment of the renderer. Set to 0 for a top alignment. 1 for a bottom alignment. And 0.5 for centering the cells. A value lower than 0 doesn't modify the alignment.
Flags: Read / Write / Construct
Allowed values: [-1,1]
Default value: 0
“ypad” property“ypad” gint
The top and bottom padding of the renderer.
Flags: Read / Write / Construct
Allowed values: >= -1
Default value: 0
“activate” signalvoid user_function (GtkSourceGutterRenderer *renderer, GtkTextIter *iter, GdkRectangle *area, GdkEvent *event, gpointer user_data)
The ::activate signal is emitted when the renderer is activated.
renderer |
the GtkSourceGutterRenderer who emits the signal |
|
iter |
||
area |
||
event |
the event that caused the activation |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“query-activatable” signalgboolean user_function (GtkSourceGutterRenderer *renderer, GtkTextIter *iter, GdkRectangle *area, GdkEvent *event, gpointer user_data)
The ::query-activatable signal is emitted when the renderer can possibly be activated.
renderer |
the GtkSourceGutterRenderer who emits the signal |
|
iter |
||
area |
||
event |
the GdkEvent that is causing the activatable query |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“query-data” signalvoid user_function (GtkSourceGutterRenderer *renderer, GtkTextIter *start, GtkTextIter *end, GtkSourceGutterRendererState state, gpointer user_data)
The ::query-data signal is emitted when the renderer needs to be filled with data just before a cell is drawn. This can be used by general renderer implementations to allow render data to be filled in externally.
renderer |
the GtkSourceGutterRenderer who emits the signal |
|
start |
||
end |
||
state |
the renderer state |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“query-tooltip” signalgboolean user_function (GtkSourceGutterRenderer *renderer, GtkTextIter *iter, GdkRectangle *area, gint x, gint y, GtkTooltip *tooltip, gpointer user_data)
The ::query-tooltip signal is emitted when the renderer can show a tooltip.
renderer |
the GtkSourceGutterRenderer who emits the signal |
|
iter |
||
area |
||
x |
the x position (in window coordinates) |
|
y |
the y position (in window coordinates) |
|
tooltip |
||
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“queue-draw” signalvoid user_function (GtkSourceGutterRenderer *renderer, gpointer user_data)
The ::queue-draw signal is emitted when the renderer needs
to be redrawn. Use gtk_source_gutter_renderer_queue_draw()
to emit this signal from an implementation of the
GtkSourceGutterRenderer interface.
renderer |
the GtkSourceGutterRenderer who emits the signal |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last