# Fusuma [](https://badge.fury.io/rb/fusuma) [](https://travis-ci.com/iberianpig/fusuma) [](https://coveralls.io/github/iberianpig/fusuma?branch=master) [](http://inch-ci.org/github/iberianpig/fusuma)
Fusuma is multitouch gesture recognizer.
This gem makes your linux able to recognize swipes or pinchs and assign commands to them.
襖(Fusuma) means sliding door used to partition off rooms in a Japanese house.
## Features
- Easy installation with RubyGems
- Defining Gestures and Actions in YAML
- Sensitivity setting (threshold, interval) for gesture recognition
- Automatic device addition for reconnecting external touchpads
- Extension of gesture recognition by [plugin system](https://github.com/iberianpig/fusuma/#fusuma-plugins)
## Installation
### 1. Grant permission to read the touchpad device
**IMPORTANT**: You **MUST** be a member of the **INPUT** group to read touchpad by Fusuma.
```bash
$ sudo gpasswd -a $USER input
```
Then, You **MUST** **REBOOT** to assign this group.
### 2. Install libinput-tools
You need `libinput` release 1.0 or later.
```bash
$ sudo apt-get install libinput-tools
```
### 3. Install Ruby
Fusuma runs in Ruby, so you must install it first.
```bash
$ sudo apt-get install ruby
```
### 4. Install Fusuma
```bash
$ sudo gem install fusuma
```
### 5. Install xdotool (optional)
For sending shortcuts:
```bash
$ sudo apt-get install xdotool
```
### Touchpad not working in GNOME
Ensure the touchpad events are being sent to the GNOME desktop by running the following command:
```bash
$ gsettings set org.gnome.desktop.peripherals.touchpad send-events enabled
```
## Usage
```bash
$ fusuma
```
## Update
```bash
$ sudo gem update fusuma
```
## Customize Gesture Mapping
You can customize the settings for gestures to put and edit `~/.config/fusuma/config.yml`.
**NOTE: You will need to create the `~/.config/fusuma` directory if it doesn't exist yet.**
```bash
$ mkdir -p ~/.config/fusuma # create config directory
$ nano ~/.config/fusuma/config.yml # edit config file.
```
### Available gestures
* `swipe:`
* support `3:`, `4:` fingers
* support `left:`, `right:`, `up:`, `down:` directions
* `pinch:`
* support `2:`, `3:`, `4:` fingers
* support `in:`, `out:` directions
* `rotate:`
* support `2:`, `3:`, `4:` fingers
* support `clockwise:`,`counterclockwise:` directions
### About YAML Basic Syntax
- Comments in YAML begins with the `#` character.
- Comments must be separated from other tokens by whitespaces.
- Indentation of whitespace is used to denote structure.
- Tabs are not included as indentation for YAML files.
### Example: Gesture Mapping for Ubuntu
https://github.com/iberianpig/fusuma/wiki/Ubuntu
```yaml
swipe:
3:
left:
command: "xdotool key alt+Right" # History forward
right:
command: "xdotool key alt+Left" # History back
up:
command: "xdotool key super" # Activity
down:
command: "xdotool key super" # Activity
4:
left:
command: "xdotool key ctrl+alt+Down" # Switch to next workspace
right:
command: "xdotool key ctrl+alt+Up" # Switch to previous workspace
up:
command: "xdotool key ctrl+alt+Down" # Switch to next workspace
down:
command: "xdotool key ctrl+alt+Up" # Switch to previous workspace
pinch:
in:
command: "xdotool keydown ctrl click 4 keyup ctrl" # Zoom in
out:
command: "xdotool keydown ctrl click 5 keyup ctrl" # Zoom out
```
### More Example of config.yml
The following wiki pages can be edited by everyone.
- [Ubuntu](https://github.com/iberianpig/fusuma/wiki/Ubuntu)
- [elementary OS](https://github.com/iberianpig/fusuma/wiki/elementary-OS)
- [i3](https://github.com/iberianpig/fusuma/wiki/i3)
- [KDE to mimic MacOS](https://github.com/iberianpig/fusuma/wiki/KDE-to-mimic-MacOS)
- [POP OS with Cinnamon](https://github.com/iberianpig/fusuma/wiki/POP-OS-with-Cinnamon)
- [PopOS Default Gnome](https://github.com/iberianpig/fusuma/wiki/PopOS-Default-Gnome)
- [Ubuntu OS to mimic Mac a little](https://github.com/iberianpig/fusuma/wiki/Ubuntu-OS-to-mimic-Mac-a-little)
If you have a nice configuration, please share `~/.config/fusuma/config.yml` with everyone.
### Threshold and Interval
if `command:` properties are blank, the swipe/pinch doesn't execute command.
`threshold:` is sensitivity to swipe/pinch. Default value is 1.
If the swipe's threshold is `0.5`, shorten swipe-length by half.
`interval:` is delay between swipes/pinches. Default value is 1.
If the swipe's interval is `0.5`, shorten swipe-interval by half to recognize a next swipe.
### Example of `threshold:` / `interval:` settings
```yaml
swipe:
3:
left:
command: 'xdotool key alt+Right' # threshold: 0.5, interval: 0.75
threshold: 0.5
right:
command: 'xdotool key alt+Left' # threshold: 0.5, interval: 0.75
threshold: 0.5
up:
command: 'xdotool key super' # threshold: 1, interval: 0.75
down:
command: 'xdotool key super' # threshold: 1, interval: 0.75
pinch:
2:
in:
command: "xdotool keydown ctrl click 4 keyup ctrl" # threshold: 0.5, interval: 0.5
out:
command: "xdotool keydown ctrl click 5 keyup ctrl" # threshold: 0.5, interval: 0.5
threshold:
pinch: 0.5
interval:
swipe: 0.75
pinch: 0.5
```
There are three priorities of `threshold:` and `interval:`.
The individual `threshold:` and `interval:` settings (under "direction") have a higher priority than the global one (under "root")
1. child elements in the direction (left/right/down/up → threshold/interval)
1. root child elements (threshold/interval → swipe/pinch)
1. default value (= 1)
### `command:` property for assigning commands
On fusuma version 0.4 `command:` property is available!
You can assign any command each gestures.
**`shortcut:` property is deprecated**, **it was removed on fusuma version 1.0**.
You need to replace to `command:` property.
```diff
swipe:
3:
left:
- shortcut: 'alt+Left'
+ command: 'xdotool key alt+Left'
right:
- shortcut: 'alt+Right'
+ command: 'xdotool key alt+Right'
```
### About xdotool
- xdotool manual (https://github.com/jordansissel/xdotool/blob/master/xdotool.pod)
- Available keys' hint (https://github.com/jordansissel/xdotool/issues/212#issuecomment-406156157)
**NOTE: xdotool has some issues**
- Gestures take a few seconds to react(https://github.com/iberianpig/fusuma/issues/113)
#### Alternatives to xdotool
- [fusuma-plugin-sendkey](https://github.com/iberianpig/fusuma-plugin-sendkey)
- Emulates keyboard events
- Low latency
- Wayland compatible
- `xte`
- [xte(1) - Linux man page](https://linux.die.net/man/1/xte)
- install with `sudo apt xautomation`
- [ydotool](https://github.com/ReimuNotMoe/ydotool)
- Wayland compatible
- Needs more maintainers.
- Requires only replacing `xdotool` with `ydotool` in in fusuma conf.
## Options
- `-c`, `--config=path/to/file` : Use an alternative config file
- `-d`, `--daemon` : Daemonize process
- `-l`, `--list-devices` : List available devices
- `-v`, `--verbose` : Show details about the results of running fusuma
- `--device="Device name"` : Open the given device only (DEPRECATED)
- `--version` : Show fusuma version
### Specify touchpads by device name
Set the following options to recognize multi-touch gestures only for the specified touchpad device.
```yaml
plugin:
filters:
libinput_device_filter:
keep_device_names:
- "BUILT-IN TOUCHPAD NAME"
- "EXTERNAL TOUCHPAD NAME"
```
## Autostart (gnome-session-properties)
1. Check the path where you installed fusuma with `$ which fusuma`
2. Open `$ gnome-session-properties`
3. Add Fusuma and enter the location where the above path was checked in the command input field
4. Add the `-d` option at the end of the command input field
## Fusuma Plugins
Following features are provided as plugins.
- Adding new gestures or combinations
- Features for specific Linux distributions
- Setting different gestures per applications
### Installation of fusuma plugins
Fusuma plugins are provided with the `fusuma-plugin-XXXXX` naming convention and hosted on [RubyGems](https://rubygems.org/search?utf8=%E2%9C%93&query=fusuma-plugins).
`$ sudo gem install fusuma-plugin-XXXXX`
### Available plugins
| Name | About |
| ------------------------------------------------------------------------------ | --------------------------------------------- |
| [fusuma-plugin-sendkey](https://github.com/iberianpig/fusuma-plugin-sendkey) | Emulates keyboard events |
| [fusuma-plugin-wmctrl](https://github.com/iberianpig/fusuma-plugin-wmctrl) | Manages Window and Workspace |
| [fusuma-plugin-keypress](https://github.com/iberianpig/fusuma-plugin-keypress) | Detects gestures while pressing multiple keys |
| [fusuma-plugin-tap](https://github.com/iberianpig/fusuma-plugin-tap) | Detects Tap and Hold gestures |
## Tutorial Video
[](http://www.youtube.com/watch?v=bn11Iwvf29I "Multitouch Touchpad Gestures in Linux with Fusuma")
[Multitouch Touchpad Gestures in Linux with Fusuma](http://www.youtube.com/watch?v=bn11Iwvf29I) by [Eric Adams](https://www.youtube.com/user/igster75)
## Support
I'm a Freelance Engineer in Japan and working on these products after finishing my regular work or on my holidays.
Currently, my open-source contribution times is not enough.
If you like my work and want to contribute and become a sponsor, I will be able to focus on my projects.
- [GitHub Sponsors](https://github.com/sponsors/iberianpig) (Zero fee!)
- [Patreon](https://www.patreon.com/iberianpig)
## Contributing
Bug reports and pull requests are welcome on GitHub at https://github.com/iberianpig/fusuma. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [Contributor Covenant](http://contributor-covenant.org) code of conduct.
## License
The gem is available as open source under the terms of the [MIT License](http://opensource.org/licenses/MIT).