# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Es
module V20180416
# 后备索引元数据字段
class BackingIndexMetaField < TencentCloud::Common::AbstractModel
# @param IndexName: 后备索引名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexName: String
# @param IndexStatus: 后备索引状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStatus: String
# @param IndexStorage: 后备索引存储大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStorage: Integer
# @param IndexPhrase: 后备索引当前生命周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexPhrase: String
# @param IndexCreateTime: 后备索引创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexCreateTime: String
attr_accessor :IndexName, :IndexStatus, :IndexStorage, :IndexPhrase, :IndexCreateTime
def initialize(indexname=nil, indexstatus=nil, indexstorage=nil, indexphrase=nil, indexcreatetime=nil)
@IndexName = indexname
@IndexStatus = indexstatus
@IndexStorage = indexstorage
@IndexPhrase = indexphrase
@IndexCreateTime = indexcreatetime
end
def deserialize(params)
@IndexName = params['IndexName']
@IndexStatus = params['IndexStatus']
@IndexStorage = params['IndexStorage']
@IndexPhrase = params['IndexPhrase']
@IndexCreateTime = params['IndexCreateTime']
end
end
# 集群维度视图数据
class ClusterView < TencentCloud::Common::AbstractModel
# @param Health: 集群健康状态
# @type Health: Float
# @param Visible: 集群是否可见
# @type Visible: Float
# @param Break: 集群是否熔断
# @type Break: Float
# @param AvgDiskUsage: 平均磁盘使用率
# @type AvgDiskUsage: Float
# @param AvgMemUsage: 平均内存使用率
# @type AvgMemUsage: Float
# @param AvgCpuUsage: 平均cpu使用率
# @type AvgCpuUsage: Float
# @param TotalDiskSize: 集群总存储大小
# @type TotalDiskSize: Integer
# @param TargetNodeTypes: 客户端请求节点
# @type TargetNodeTypes: Array
# @param NodeNum: 在线节点数
# @type NodeNum: Integer
# @param TotalNodeNum: 总节点数
# @type TotalNodeNum: Integer
# @param DataNodeNum: 数据节点数
# @type DataNodeNum: Integer
# @param IndexNum: 索引数
# @type IndexNum: Integer
# @param DocNum: 文档数
# @type DocNum: Integer
# @param DiskUsedInBytes: 磁盘已使用字节数
# @type DiskUsedInBytes: Integer
# @param ShardNum: 分片个数
# @type ShardNum: Integer
# @param PrimaryShardNum: 主分片个数
# @type PrimaryShardNum: Integer
# @param RelocatingShardNum: 迁移中的分片个数
# @type RelocatingShardNum: Integer
# @param InitializingShardNum: 初始化中的分片个数
# @type InitializingShardNum: Integer
# @param UnassignedShardNum: 未分配的分片个数
# @type UnassignedShardNum: Integer
# @param TotalCosStorage: 企业版COS存储容量大小，单位GB
# @type TotalCosStorage: Integer
# @param SearchableSnapshotCosBucket: 企业版集群可搜索快照cos存放的bucket名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SearchableSnapshotCosBucket: String
# @param SearchableSnapshotCosAppId: 企业版集群可搜索快照cos所属appid
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SearchableSnapshotCosAppId: String
attr_accessor :Health, :Visible, :Break, :AvgDiskUsage, :AvgMemUsage, :AvgCpuUsage, :TotalDiskSize, :TargetNodeTypes, :NodeNum, :TotalNodeNum, :DataNodeNum, :IndexNum, :DocNum, :DiskUsedInBytes, :ShardNum, :PrimaryShardNum, :RelocatingShardNum, :InitializingShardNum, :UnassignedShardNum, :TotalCosStorage, :SearchableSnapshotCosBucket, :SearchableSnapshotCosAppId
def initialize(health=nil, visible=nil, _break=nil, avgdiskusage=nil, avgmemusage=nil, avgcpuusage=nil, totaldisksize=nil, targetnodetypes=nil, nodenum=nil, totalnodenum=nil, datanodenum=nil, indexnum=nil, docnum=nil, diskusedinbytes=nil, shardnum=nil, primaryshardnum=nil, relocatingshardnum=nil, initializingshardnum=nil, unassignedshardnum=nil, totalcosstorage=nil, searchablesnapshotcosbucket=nil, searchablesnapshotcosappid=nil)
@Health = health
@Visible = visible
@Break = _break
@AvgDiskUsage = avgdiskusage
@AvgMemUsage = avgmemusage
@AvgCpuUsage = avgcpuusage
@TotalDiskSize = totaldisksize
@TargetNodeTypes = targetnodetypes
@NodeNum = nodenum
@TotalNodeNum = totalnodenum
@DataNodeNum = datanodenum
@IndexNum = indexnum
@DocNum = docnum
@DiskUsedInBytes = diskusedinbytes
@ShardNum = shardnum
@PrimaryShardNum = primaryshardnum
@RelocatingShardNum = relocatingshardnum
@InitializingShardNum = initializingshardnum
@UnassignedShardNum = unassignedshardnum
@TotalCosStorage = totalcosstorage
@SearchableSnapshotCosBucket = searchablesnapshotcosbucket
@SearchableSnapshotCosAppId = searchablesnapshotcosappid
end
def deserialize(params)
@Health = params['Health']
@Visible = params['Visible']
@Break = params['Break']
@AvgDiskUsage = params['AvgDiskUsage']
@AvgMemUsage = params['AvgMemUsage']
@AvgCpuUsage = params['AvgCpuUsage']
@TotalDiskSize = params['TotalDiskSize']
@TargetNodeTypes = params['TargetNodeTypes']
@NodeNum = params['NodeNum']
@TotalNodeNum = params['TotalNodeNum']
@DataNodeNum = params['DataNodeNum']
@IndexNum = params['IndexNum']
@DocNum = params['DocNum']
@DiskUsedInBytes = params['DiskUsedInBytes']
@ShardNum = params['ShardNum']
@PrimaryShardNum = params['PrimaryShardNum']
@RelocatingShardNum = params['RelocatingShardNum']
@InitializingShardNum = params['InitializingShardNum']
@UnassignedShardNum = params['UnassignedShardNum']
@TotalCosStorage = params['TotalCosStorage']
@SearchableSnapshotCosBucket = params['SearchableSnapshotCosBucket']
@SearchableSnapshotCosAppId = params['SearchableSnapshotCosAppId']
end
end
# ES cos自动备份信息
class CosBackup < TencentCloud::Common::AbstractModel
# @param IsAutoBackup: 是否开启cos自动备份
# @type IsAutoBackup: Boolean
# @param BackupTime: 自动备份执行时间（精确到小时）, e.g. "22:00"
# @type BackupTime: String
attr_accessor :IsAutoBackup, :BackupTime
def initialize(isautobackup=nil, backuptime=nil)
@IsAutoBackup = isautobackup
@BackupTime = backuptime
end
def deserialize(params)
@IsAutoBackup = params['IsAutoBackup']
@BackupTime = params['BackupTime']
end
end
# CreateIndex请求参数结构体
class CreateIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 创建的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 创建的索引名
# @type IndexName: String
# @param IndexMetaJson: 创建的索引元数据JSON，如mappings、settings
# @type IndexMetaJson: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
attr_accessor :InstanceId, :IndexType, :IndexName, :IndexMetaJson, :Username, :Password
def initialize(instanceid=nil, indextype=nil, indexname=nil, indexmetajson=nil, username=nil, password=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@IndexMetaJson = indexmetajson
@Username = username
@Password = password
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@IndexMetaJson = params['IndexMetaJson']
@Username = params['Username']
@Password = params['Password']
end
end
# CreateIndex返回参数结构体
class CreateIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateInstance请求参数结构体
class CreateInstanceRequest < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param EsVersion: 实例版本（支持"5.6.4"、"6.4.3"、"6.8.2"、"7.5.1"、"7.10.1"）
# @type EsVersion: String
# @param VpcId: 私有网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Password: 访问密码（密码需8到16位，至少包括两项（[a-z,A-Z],[0-9]和[-!@#$%&^*+=_:;,.?]的特殊符号）
# @type Password: String
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param NodeNum: 已废弃请使用NodeInfoList
# 节点数量（2-50个）
# @type NodeNum: Integer
# @param ChargeType: 计费类型<li>PREPAID：预付费，即包年包月</li><li>POSTPAID_BY_HOUR：按小时后付费</li>默认值POSTPAID_BY_HOUR
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长（单位由参数TimeUnit决定）
# @type ChargePeriod: Integer
# @param RenewFlag: 自动续费标识<li>RENEW_FLAG_AUTO：自动续费</li><li>RENEW_FLAG_MANUAL：不自动续费，用户手动续费</li>ChargeType为PREPAID时需要设置，如不传递该参数，普通用户默认不自动续费，SVIP用户自动续费
# @type RenewFlag: String
# @param NodeType: 已废弃请使用NodeInfoList
# 节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param DiskType: 已废弃请使用NodeInfoList
# 节点磁盘类型<li>CLOUD_SSD：SSD云硬盘</li><li>CLOUD_PREMIUM：高硬能云硬盘</li>默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 已废弃请使用NodeInfoList
# 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param TimeUnit: 计费时长单位（ChargeType为PREPAID时需要设置，默认值为“m”，表示月，当前只支持“m”）
# @type TimeUnit: String
# @param AutoVoucher: 是否自动使用代金券<li>0：不自动使用</li><li>1：自动使用</li>默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param EnableDedicatedMaster: 已废弃请使用NodeInfoList
# 是否创建专用主节点<li>true：开启专用主节点</li><li>false：不开启专用主节点</li>默认值false
# @type EnableDedicatedMaster: Boolean
# @param MasterNodeNum: 已废弃请使用NodeInfoList
# 专用主节点个数（只支持3个和5个，EnableDedicatedMaster为true时该值必传）
# @type MasterNodeNum: Integer
# @param MasterNodeType: 已废弃请使用NodeInfoList
# 专用主节点类型（EnableDedicatedMaster为true时必传）<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type MasterNodeType: String
# @param MasterNodeDiskSize: 已废弃请使用NodeInfoList
# 专用主节点磁盘大小（单位GB，非必传，若传递则必须为50，暂不支持自定义）
# @type MasterNodeDiskSize: Integer
# @param ClusterNameInConf: 集群配置文件中的ClusterName（系统默认配置为实例ID，暂不支持自定义）
# @type ClusterNameInConf: String
# @param DeployMode: 集群部署方式<li>0：单可用区部署</li><li>1：多可用区部署</li>默认为0
# @type DeployMode: Integer
# @param MultiZoneInfo: 多可用区部署时可用区的详细信息(DeployMode为1时必传)
# @type MultiZoneInfo: Array
# @param LicenseType: License类型<li>oss：开源版</li><li>basic：基础版</li><li>platinum：白金版</li>默认值platinum
# @type LicenseType: String
# @param NodeInfoList: 节点信息列表， 用于描述集群各类节点的规格信息如节点类型，节点个数，节点规格，磁盘类型，磁盘大小等
# @type NodeInfoList: Array
# @param TagList: 节点标签信息列表
# @type TagList: Array
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证<li>1：不开启</li><li>2：开启</li>
# @type BasicSecurityType: Integer
# @param SceneType: 场景化模板类型 0：不启用 1：通用 2：日志 3：搜索
# @type SceneType: Integer
# @param WebNodeTypeInfo: 可视化节点配置
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param Protocol: 创建https集群，默认是http
# @type Protocol: String
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
# @param EnableHybridStorage: 是否开启存算分离
# @type EnableHybridStorage: Boolean
# @param DiskEnhance: 是否开启essd 增强型云盘
# @type DiskEnhance: Integer
# @param EnableDiagnose: 是否开启智能巡检
# @type EnableDiagnose: Boolean
attr_accessor :Zone, :EsVersion, :VpcId, :SubnetId, :Password, :InstanceName, :NodeNum, :ChargeType, :ChargePeriod, :RenewFlag, :NodeType, :DiskType, :DiskSize, :TimeUnit, :AutoVoucher, :VoucherIds, :EnableDedicatedMaster, :MasterNodeNum, :MasterNodeType, :MasterNodeDiskSize, :ClusterNameInConf, :DeployMode, :MultiZoneInfo, :LicenseType, :NodeInfoList, :TagList, :BasicSecurityType, :SceneType, :WebNodeTypeInfo, :Protocol, :OperationDuration, :EnableHybridStorage, :DiskEnhance, :EnableDiagnose
def initialize(zone=nil, esversion=nil, vpcid=nil, subnetid=nil, password=nil, instancename=nil, nodenum=nil, chargetype=nil, chargeperiod=nil, renewflag=nil, nodetype=nil, disktype=nil, disksize=nil, timeunit=nil, autovoucher=nil, voucherids=nil, enablededicatedmaster=nil, masternodenum=nil, masternodetype=nil, masternodedisksize=nil, clusternameinconf=nil, deploymode=nil, multizoneinfo=nil, licensetype=nil, nodeinfolist=nil, taglist=nil, basicsecuritytype=nil, scenetype=nil, webnodetypeinfo=nil, protocol=nil, operationduration=nil, enablehybridstorage=nil, diskenhance=nil, enablediagnose=nil)
@Zone = zone
@EsVersion = esversion
@VpcId = vpcid
@SubnetId = subnetid
@Password = password
@InstanceName = instancename
@NodeNum = nodenum
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@RenewFlag = renewflag
@NodeType = nodetype
@DiskType = disktype
@DiskSize = disksize
@TimeUnit = timeunit
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@EnableDedicatedMaster = enablededicatedmaster
@MasterNodeNum = masternodenum
@MasterNodeType = masternodetype
@MasterNodeDiskSize = masternodedisksize
@ClusterNameInConf = clusternameinconf
@DeployMode = deploymode
@MultiZoneInfo = multizoneinfo
@LicenseType = licensetype
@NodeInfoList = nodeinfolist
@TagList = taglist
@BasicSecurityType = basicsecuritytype
@SceneType = scenetype
@WebNodeTypeInfo = webnodetypeinfo
@Protocol = protocol
@OperationDuration = operationduration
@EnableHybridStorage = enablehybridstorage
@DiskEnhance = diskenhance
@EnableDiagnose = enablediagnose
end
def deserialize(params)
@Zone = params['Zone']
@EsVersion = params['EsVersion']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Password = params['Password']
@InstanceName = params['InstanceName']
@NodeNum = params['NodeNum']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@TimeUnit = params['TimeUnit']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@EnableDedicatedMaster = params['EnableDedicatedMaster']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeType = params['MasterNodeType']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@ClusterNameInConf = params['ClusterNameInConf']
@DeployMode = params['DeployMode']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@LicenseType = params['LicenseType']
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@BasicSecurityType = params['BasicSecurityType']
@SceneType = params['SceneType']
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@Protocol = params['Protocol']
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
@EnableHybridStorage = params['EnableHybridStorage']
@DiskEnhance = params['DiskEnhance']
@EnableDiagnose = params['EnableDiagnose']
end
end
# CreateInstance返回参数结构体
class CreateInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :DealName, :RequestId
def initialize(instanceid=nil, dealname=nil, requestid=nil)
@InstanceId = instanceid
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# CreateLogstashInstance请求参数结构体
class CreateLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param Zone: 可用区
# @type Zone: String
# @param LogstashVersion: 实例版本（支持"6.8.13"、"7.10.1"）
# @type LogstashVersion: String
# @param VpcId: 私有网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param NodeNum: 节点数量（2-50个）
# @type NodeNum: Integer
# @param ChargeType: 计费类型<li>PREPAID：预付费，即包年包月</li><li>POSTPAID_BY_HOUR：按小时后付费</li>默认值POSTPAID_BY_HOUR
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长（单位由参数TimeUnit决定）
# @type ChargePeriod: Integer
# @param TimeUnit: 计费时长单位（ChargeType为PREPAID时需要设置，默认值为“m”，表示月，当前只支持“m”）
# @type TimeUnit: String
# @param AutoVoucher: 是否自动使用代金券<li>0：不自动使用</li><li>1：自动使用</li>默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param RenewFlag: 自动续费标识<li>RENEW_FLAG_AUTO：自动续费</li><li>RENEW_FLAG_MANUAL：不自动续费，用户手动续费</li>ChargeType为PREPAID时需要设置，如不传递该参数，普通用户默认不自动续费，SVIP用户自动续费
# @type RenewFlag: String
# @param NodeType: 节点规格<li>LOGSTASH.S1.SMALL2：1核2G</li><li>LOGSTASH.S1.MEDIUM4：2核4G</li><li>LOGSTASH.S1.MEDIUM8：2核8G</li><li>LOGSTASH.S1.LARGE16：4核16G</li><li>LOGSTASH.S1.2XLARGE32：8核32G</li><li>LOGSTASH.S1.4XLARGE32：16核32G</li><li>LOGSTASH.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param DiskType: 节点磁盘类型<li>CLOUD_SSD：SSD云硬盘</li><li>CLOUD_PREMIUM：高硬能云硬盘</li>默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param LicenseType: License类型<li>oss：开源版</li><li>xpack：xpack版</li>默认值xpack
# @type LicenseType: String
# @param TagList: 标签信息列表
# @type TagList: Array
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
attr_accessor :InstanceName, :Zone, :LogstashVersion, :VpcId, :SubnetId, :NodeNum, :ChargeType, :ChargePeriod, :TimeUnit, :AutoVoucher, :VoucherIds, :RenewFlag, :NodeType, :DiskType, :DiskSize, :LicenseType, :TagList, :OperationDuration
def initialize(instancename=nil, zone=nil, logstashversion=nil, vpcid=nil, subnetid=nil, nodenum=nil, chargetype=nil, chargeperiod=nil, timeunit=nil, autovoucher=nil, voucherids=nil, renewflag=nil, nodetype=nil, disktype=nil, disksize=nil, licensetype=nil, taglist=nil, operationduration=nil)
@InstanceName = instancename
@Zone = zone
@LogstashVersion = logstashversion
@VpcId = vpcid
@SubnetId = subnetid
@NodeNum = nodenum
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@TimeUnit = timeunit
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@RenewFlag = renewflag
@NodeType = nodetype
@DiskType = disktype
@DiskSize = disksize
@LicenseType = licensetype
@TagList = taglist
@OperationDuration = operationduration
end
def deserialize(params)
@InstanceName = params['InstanceName']
@Zone = params['Zone']
@LogstashVersion = params['LogstashVersion']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@NodeNum = params['NodeNum']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@TimeUnit = params['TimeUnit']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@LicenseType = params['LicenseType']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
end
end
# CreateLogstashInstance返回参数结构体
class CreateLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :RequestId
def initialize(instanceid=nil, requestid=nil)
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# DeleteIndex请求参数结构体
class DeleteIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 删除的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 删除的索引名
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param BackingIndexName: 后备索引名
# @type BackingIndexName: String
attr_accessor :InstanceId, :IndexType, :IndexName, :Username, :Password, :BackingIndexName
def initialize(instanceid=nil, indextype=nil, indexname=nil, username=nil, password=nil, backingindexname=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@Username = username
@Password = password
@BackingIndexName = backingindexname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
@BackingIndexName = params['BackingIndexName']
end
end
# DeleteIndex返回参数结构体
class DeleteIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteInstance请求参数结构体
class DeleteInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DeleteInstance返回参数结构体
class DeleteInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteLogstashInstance请求参数结构体
class DeleteLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DeleteLogstashInstance返回参数结构体
class DeleteLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteLogstashPipelines请求参数结构体
class DeleteLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# DeleteLogstashPipelines返回参数结构体
class DeleteLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeIndexList请求参数结构体
class DescribeIndexListRequest < TencentCloud::Common::AbstractModel
# @param IndexType: 索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexName: 索引名，若填空则获取所有索引
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param Offset: 分页起始位置
# @type Offset: Integer
# @param Limit: 一页展示数量
# @type Limit: Integer
# @param OrderBy: 排序字段，支持索引名：IndexName、索引存储量：IndexStorage、索引创建时间：IndexCreateTime
# @type OrderBy: String
# @param IndexStatusList: 过滤索引状态
# @type IndexStatusList: Array
# @param Order: 排序顺序，支持asc、desc
# @type Order: String
attr_accessor :IndexType, :InstanceId, :IndexName, :Username, :Password, :Offset, :Limit, :OrderBy, :IndexStatusList, :Order
def initialize(indextype=nil, instanceid=nil, indexname=nil, username=nil, password=nil, offset=nil, limit=nil, orderby=nil, indexstatuslist=nil, order=nil)
@IndexType = indextype
@InstanceId = instanceid
@IndexName = indexname
@Username = username
@Password = password
@Offset = offset
@Limit = limit
@OrderBy = orderby
@IndexStatusList = indexstatuslist
@Order = order
end
def deserialize(params)
@IndexType = params['IndexType']
@InstanceId = params['InstanceId']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderBy = params['OrderBy']
@IndexStatusList = params['IndexStatusList']
@Order = params['Order']
end
end
# DescribeIndexList返回参数结构体
class DescribeIndexListResponse < TencentCloud::Common::AbstractModel
# @param IndexMetaFields: 索引元数据字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexMetaFields: Array
# @param TotalCount: 查询总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IndexMetaFields, :TotalCount, :RequestId
def initialize(indexmetafields=nil, totalcount=nil, requestid=nil)
@IndexMetaFields = indexmetafields
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['IndexMetaFields'].nil?
@IndexMetaFields = []
params['IndexMetaFields'].each do |i|
indexmetafield_tmp = IndexMetaField.new
indexmetafield_tmp.deserialize(i)
@IndexMetaFields << indexmetafield_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeIndexMeta请求参数结构体
class DescribeIndexMetaRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 索引名，若填空则获取所有索引
# @type IndexName: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
attr_accessor :InstanceId, :IndexType, :IndexName, :Username, :Password
def initialize(instanceid=nil, indextype=nil, indexname=nil, username=nil, password=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@Username = username
@Password = password
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@Username = params['Username']
@Password = params['Password']
end
end
# DescribeIndexMeta返回参数结构体
class DescribeIndexMetaResponse < TencentCloud::Common::AbstractModel
# @param IndexMetaField: 索引元数据字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexMetaField: :class:`Tencentcloud::Es.v20180416.models.IndexMetaField`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IndexMetaField, :RequestId
def initialize(indexmetafield=nil, requestid=nil)
@IndexMetaField = indexmetafield
@RequestId = requestid
end
def deserialize(params)
unless params['IndexMetaField'].nil?
@IndexMetaField = IndexMetaField.new
@IndexMetaField.deserialize(params['IndexMetaField'])
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceLogs请求参数结构体
class DescribeInstanceLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param LogType: 日志类型，默认值为1
# <li>1, 主日志</li>
# <li>2, 搜索慢日志</li>
# <li>3, 索引慢日志</li>
# <li>4, GC日志</li>
# @type LogType: Integer
# @param SearchKey: 搜索词，支持LUCENE语法，如 level:WARN、ip:1.1.1.1、message:test-index等
# @type SearchKey: String
# @param StartTime: 日志开始时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type StartTime: String
# @param EndTime: 日志结束时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type EndTime: String
# @param Offset: 分页起始值, 默认值为0
# @type Offset: Integer
# @param Limit: 分页大小，默认值为100，最大值100
# @type Limit: Integer
# @param OrderByType: 时间排序方式，默认值为0
# <li>0, 降序</li>
# <li>1, 升序</li>
# @type OrderByType: Integer
attr_accessor :InstanceId, :LogType, :SearchKey, :StartTime, :EndTime, :Offset, :Limit, :OrderByType
def initialize(instanceid=nil, logtype=nil, searchkey=nil, starttime=nil, endtime=nil, offset=nil, limit=nil, orderbytype=nil)
@InstanceId = instanceid
@LogType = logtype
@SearchKey = searchkey
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogType = params['LogType']
@SearchKey = params['SearchKey']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByType = params['OrderByType']
end
end
# DescribeInstanceLogs返回参数结构体
class DescribeInstanceLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的日志条数
# @type TotalCount: Integer
# @param InstanceLogList: 日志详细信息列表
# @type InstanceLogList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceLogList, :RequestId
def initialize(totalcount=nil, instanceloglist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceLogList = instanceloglist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceLogList'].nil?
@InstanceLogList = []
params['InstanceLogList'].each do |i|
instancelog_tmp = InstanceLog.new
instancelog_tmp.deserialize(i)
@InstanceLogList << instancelog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceOperations请求参数结构体
class DescribeInstanceOperationsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param StartTime: 起始时间, e.g. "2019-03-07 16:30:39"
# @type StartTime: String
# @param EndTime: 结束时间, e.g. "2019-03-30 20:18:03"
# @type EndTime: String
# @param Offset: 分页起始值
# @type Offset: Integer
# @param Limit: 分页大小
# @type Limit: Integer
attr_accessor :InstanceId, :StartTime, :EndTime, :Offset, :Limit
def initialize(instanceid=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeInstanceOperations返回参数结构体
class DescribeInstanceOperationsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 操作记录总数
# @type TotalCount: Integer
# @param Operations: 操作记录
# @type Operations: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Operations, :RequestId
def initialize(totalcount=nil, operations=nil, requestid=nil)
@TotalCount = totalcount
@Operations = operations
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Operations'].nil?
@Operations = []
params['Operations'].each do |i|
operation_tmp = Operation.new
operation_tmp.deserialize(i)
@Operations << operation_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstances请求参数结构体
class DescribeInstancesRequest < TencentCloud::Common::AbstractModel
# @param Zone: 集群实例所属可用区，不传则默认所有可用区
# @type Zone: String
# @param InstanceIds: 集群实例ID列表
# @type InstanceIds: Array
# @param InstanceNames: 集群实例名称列表
# @type InstanceNames: Array
# @param Offset: 分页起始值, 默认值0
# @type Offset: Integer
# @param Limit: 分页大小，默认值20
# @type Limit: Integer
# @param OrderByKey: 排序字段<li>1：实例ID</li><li>2：实例名称</li><li>3：可用区</li><li>4：创建时间</li>若orderByKey未传递则按创建时间降序排序
# @type OrderByKey: Integer
# @param OrderByType: 排序方式<li>0：升序</li><li>1：降序</li>若传递了orderByKey未传递orderByType, 则默认升序
# @type OrderByType: Integer
# @param TagList: 节点标签信息列表
# @type TagList: Array
# @param IpList: 私有网络vip列表
# @type IpList: Array
# @param ZoneList: 可用区列表
# @type ZoneList: Array
# @param HealthStatus: 健康状态筛列表:0表示绿色，1表示黄色，2表示红色,-1表示未知
# @type HealthStatus: Array
# @param VpcIds: Vpc列表 筛选项
# @type VpcIds: Array
attr_accessor :Zone, :InstanceIds, :InstanceNames, :Offset, :Limit, :OrderByKey, :OrderByType, :TagList, :IpList, :ZoneList, :HealthStatus, :VpcIds
def initialize(zone=nil, instanceids=nil, instancenames=nil, offset=nil, limit=nil, orderbykey=nil, orderbytype=nil, taglist=nil, iplist=nil, zonelist=nil, healthstatus=nil, vpcids=nil)
@Zone = zone
@InstanceIds = instanceids
@InstanceNames = instancenames
@Offset = offset
@Limit = limit
@OrderByKey = orderbykey
@OrderByType = orderbytype
@TagList = taglist
@IpList = iplist
@ZoneList = zonelist
@HealthStatus = healthstatus
@VpcIds = vpcids
end
def deserialize(params)
@Zone = params['Zone']
@InstanceIds = params['InstanceIds']
@InstanceNames = params['InstanceNames']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByKey = params['OrderByKey']
@OrderByType = params['OrderByType']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@IpList = params['IpList']
@ZoneList = params['ZoneList']
@HealthStatus = params['HealthStatus']
@VpcIds = params['VpcIds']
end
end
# DescribeInstances返回参数结构体
class DescribeInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例个数
# @type TotalCount: Integer
# @param InstanceList: 实例详细信息列表
# @type InstanceList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceList, :RequestId
def initialize(totalcount=nil, instancelist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceList = instancelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceList'].nil?
@InstanceList = []
params['InstanceList'].each do |i|
instanceinfo_tmp = InstanceInfo.new
instanceinfo_tmp.deserialize(i)
@InstanceList << instanceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstanceLogs请求参数结构体
class DescribeLogstashInstanceLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param LogType: 日志类型，默认值为1
# <li>1, 主日志</li>
# <li>2, 慢日志</li>
# <li>3, GC日志</li>
# @type LogType: Integer
# @param SearchKey: 搜索词，支持LUCENE语法，如 level:WARN、ip:1.1.1.1、message:test-index等
# @type SearchKey: String
# @param StartTime: 日志开始时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type StartTime: String
# @param EndTime: 日志结束时间，格式为YYYY-MM-DD HH:MM:SS, 如2019-01-22 20:15:53
# @type EndTime: String
# @param Offset: 分页起始值, 默认值为0
# @type Offset: Integer
# @param Limit: 分页大小，默认值为100，最大值100
# @type Limit: Integer
# @param OrderByType: 时间排序方式，默认值为0
# <li>0, 降序</li>
# <li>1, 升序</li>
# @type OrderByType: Integer
attr_accessor :InstanceId, :LogType, :SearchKey, :StartTime, :EndTime, :Offset, :Limit, :OrderByType
def initialize(instanceid=nil, logtype=nil, searchkey=nil, starttime=nil, endtime=nil, offset=nil, limit=nil, orderbytype=nil)
@InstanceId = instanceid
@LogType = logtype
@SearchKey = searchkey
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogType = params['LogType']
@SearchKey = params['SearchKey']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByType = params['OrderByType']
end
end
# DescribeLogstashInstanceLogs返回参数结构体
class DescribeLogstashInstanceLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的日志条数
# @type TotalCount: Integer
# @param InstanceLogList: 日志详细信息列表
# @type InstanceLogList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceLogList, :RequestId
def initialize(totalcount=nil, instanceloglist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceLogList = instanceloglist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceLogList'].nil?
@InstanceLogList = []
params['InstanceLogList'].each do |i|
instancelog_tmp = InstanceLog.new
instancelog_tmp.deserialize(i)
@InstanceLogList << instancelog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstanceOperations请求参数结构体
class DescribeLogstashInstanceOperationsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 起始时间, e.g. "2019-03-07 16:30:39"
# @type StartTime: String
# @param EndTime: 结束时间, e.g. "2019-03-30 20:18:03"
# @type EndTime: String
# @param Offset: 分页起始值
# @type Offset: Integer
# @param Limit: 分页大小
# @type Limit: Integer
attr_accessor :InstanceId, :StartTime, :EndTime, :Offset, :Limit
def initialize(instanceid=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeLogstashInstanceOperations返回参数结构体
class DescribeLogstashInstanceOperationsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 操作记录总数
# @type TotalCount: Integer
# @param Operations: 操作记录
# @type Operations: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Operations, :RequestId
def initialize(totalcount=nil, operations=nil, requestid=nil)
@TotalCount = totalcount
@Operations = operations
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Operations'].nil?
@Operations = []
params['Operations'].each do |i|
operation_tmp = Operation.new
operation_tmp.deserialize(i)
@Operations << operation_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashInstances请求参数结构体
class DescribeLogstashInstancesRequest < TencentCloud::Common::AbstractModel
# @param Zone: 实例所属可用区，不传则默认所有可用区
# @type Zone: String
# @param InstanceIds: 实例ID列表
# @type InstanceIds: Array
# @param InstanceNames: 实例名称列表
# @type InstanceNames: Array
# @param Offset: 分页起始值, 默认值0
# @type Offset: Integer
# @param Limit: 分页大小，默认值20
# @type Limit: Integer
# @param OrderByKey: 排序字段<li>1：实例ID</li><li>2：实例名称</li><li>3：可用区</li><li>4：创建时间</li>若orderKey未传递则按创建时间降序排序
# @type OrderByKey: Integer
# @param OrderByType: 排序方式<li>0：升序</li><li>1：降序</li>若传递了orderByKey未传递orderByType, 则默认升序
# @type OrderByType: Integer
# @param VpcIds: VpcId 筛选项
# @type VpcIds: Array
# @param TagList: 标签信息列表
# @type TagList: Array
attr_accessor :Zone, :InstanceIds, :InstanceNames, :Offset, :Limit, :OrderByKey, :OrderByType, :VpcIds, :TagList
def initialize(zone=nil, instanceids=nil, instancenames=nil, offset=nil, limit=nil, orderbykey=nil, orderbytype=nil, vpcids=nil, taglist=nil)
@Zone = zone
@InstanceIds = instanceids
@InstanceNames = instancenames
@Offset = offset
@Limit = limit
@OrderByKey = orderbykey
@OrderByType = orderbytype
@VpcIds = vpcids
@TagList = taglist
end
def deserialize(params)
@Zone = params['Zone']
@InstanceIds = params['InstanceIds']
@InstanceNames = params['InstanceNames']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderByKey = params['OrderByKey']
@OrderByType = params['OrderByType']
@VpcIds = params['VpcIds']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
end
end
# DescribeLogstashInstances返回参数结构体
class DescribeLogstashInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的实例个数
# @type TotalCount: Integer
# @param InstanceList: 实例详细信息列表
# @type InstanceList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceList, :RequestId
def initialize(totalcount=nil, instancelist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceList = instancelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceList'].nil?
@InstanceList = []
params['InstanceList'].each do |i|
logstashinstanceinfo_tmp = LogstashInstanceInfo.new
logstashinstanceinfo_tmp.deserialize(i)
@InstanceList << logstashinstanceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeLogstashPipelines请求参数结构体
class DescribeLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeLogstashPipelines返回参数结构体
class DescribeLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 管道总数
# @type TotalCount: Integer
# @param LogstashPipelineList: 管道列表
# @type LogstashPipelineList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :LogstashPipelineList, :RequestId
def initialize(totalcount=nil, logstashpipelinelist=nil, requestid=nil)
@TotalCount = totalcount
@LogstashPipelineList = logstashpipelinelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['LogstashPipelineList'].nil?
@LogstashPipelineList = []
params['LogstashPipelineList'].each do |i|
logstashpipelineinfo_tmp = LogstashPipelineInfo.new
logstashpipelineinfo_tmp.deserialize(i)
@LogstashPipelineList << logstashpipelineinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeViews请求参数结构体
class DescribeViewsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeViews返回参数结构体
class DescribeViewsResponse < TencentCloud::Common::AbstractModel
# @param ClusterView: 集群维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterView: :class:`Tencentcloud::Es.v20180416.models.ClusterView`
# @param NodesView: 节点维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodesView: Array
# @param KibanasView: Kibana维度视图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanasView: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterView, :NodesView, :KibanasView, :RequestId
def initialize(clusterview=nil, nodesview=nil, kibanasview=nil, requestid=nil)
@ClusterView = clusterview
@NodesView = nodesview
@KibanasView = kibanasview
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterView'].nil?
@ClusterView = ClusterView.new
@ClusterView.deserialize(params['ClusterView'])
end
unless params['NodesView'].nil?
@NodesView = []
params['NodesView'].each do |i|
nodeview_tmp = NodeView.new
nodeview_tmp.deserialize(i)
@NodesView << nodeview_tmp
end
end
unless params['KibanasView'].nil?
@KibanasView = []
params['KibanasView'].each do |i|
kibanaview_tmp = KibanaView.new
kibanaview_tmp.deserialize(i)
@KibanasView << kibanaview_tmp
end
end
@RequestId = params['RequestId']
end
end
# DiagnoseInstance请求参数结构体
class DiagnoseInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param DiagnoseJobs: 需要触发的诊断项
# @type DiagnoseJobs: Array
# @param DiagnoseIndices: 需要诊断的索引，支持通配符
# @type DiagnoseIndices: String
attr_accessor :InstanceId, :DiagnoseJobs, :DiagnoseIndices
def initialize(instanceid=nil, diagnosejobs=nil, diagnoseindices=nil)
@InstanceId = instanceid
@DiagnoseJobs = diagnosejobs
@DiagnoseIndices = diagnoseindices
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DiagnoseJobs = params['DiagnoseJobs']
@DiagnoseIndices = params['DiagnoseIndices']
end
end
# DiagnoseInstance返回参数结构体
class DiagnoseInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ik插件词典信息
class DictInfo < TencentCloud::Common::AbstractModel
# @param Key: 词典键值
# @type Key: String
# @param Name: 词典名称
# @type Name: String
# @param Size: 词典大小，单位B
# @type Size: Integer
attr_accessor :Key, :Name, :Size
def initialize(key=nil, name=nil, size=nil)
@Key = key
@Name = name
@Size = size
end
def deserialize(params)
@Key = params['Key']
@Name = params['Name']
@Size = params['Size']
end
end
# ES集群配置项
class EsAcl < TencentCloud::Common::AbstractModel
# @param BlackIpList: kibana访问黑名单
# @type BlackIpList: Array
# @param WhiteIpList: kibana访问白名单
# @type WhiteIpList: Array
attr_accessor :BlackIpList, :WhiteIpList
def initialize(blackiplist=nil, whiteiplist=nil)
@BlackIpList = blackiplist
@WhiteIpList = whiteiplist
end
def deserialize(params)
@BlackIpList = params['BlackIpList']
@WhiteIpList = params['WhiteIpList']
end
end
# 配置组信息
class EsConfigSetInfo < TencentCloud::Common::AbstractModel
# @param Type: 配置组类型，如ldap,ad等
# @type Type: String
# @param EsConfig: "{\"order\":0,\"url\":\"ldap://10.0.1.72:389\",\"bind_dn\":\"cn=admin,dc=tencent,dc=com\",\"user_search.base_dn\":\"dc=tencent,dc=com\",\"user_search.filter\":\"(cn={0})\",\"group_search.base_dn\":\"dc=tencent,dc=com\"}"
# @type EsConfig: String
attr_accessor :Type, :EsConfig
def initialize(type=nil, esconfig=nil)
@Type = type
@EsConfig = esconfig
end
def deserialize(params)
@Type = params['Type']
@EsConfig = params['EsConfig']
end
end
# ES 词库信息
class EsDictionaryInfo < TencentCloud::Common::AbstractModel
# @param MainDict: 启用词词典列表
# @type MainDict: Array
# @param Stopwords: 停用词词典列表
# @type Stopwords: Array
# @param QQDict: QQ分词词典列表
# @type QQDict: Array
# @param Synonym: 同义词词典列表
# @type Synonym: Array
# @param UpdateType: 更新词典类型
# @type UpdateType: String
attr_accessor :MainDict, :Stopwords, :QQDict, :Synonym, :UpdateType
def initialize(maindict=nil, stopwords=nil, qqdict=nil, synonym=nil, updatetype=nil)
@MainDict = maindict
@Stopwords = stopwords
@QQDict = qqdict
@Synonym = synonym
@UpdateType = updatetype
end
def deserialize(params)
unless params['MainDict'].nil?
@MainDict = []
params['MainDict'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@MainDict << dictinfo_tmp
end
end
unless params['Stopwords'].nil?
@Stopwords = []
params['Stopwords'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@Stopwords << dictinfo_tmp
end
end
unless params['QQDict'].nil?
@QQDict = []
params['QQDict'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@QQDict << dictinfo_tmp
end
end
unless params['Synonym'].nil?
@Synonym = []
params['Synonym'].each do |i|
dictinfo_tmp = DictInfo.new
dictinfo_tmp.deserialize(i)
@Synonym << dictinfo_tmp
end
end
@UpdateType = params['UpdateType']
end
end
# ES公网访问访问控制信息
class EsPublicAcl < TencentCloud::Common::AbstractModel
# @param BlackIpList: 访问黑名单
# @type BlackIpList: Array
# @param WhiteIpList: 访问白名单
# @type WhiteIpList: Array
attr_accessor :BlackIpList, :WhiteIpList
def initialize(blackiplist=nil, whiteiplist=nil)
@BlackIpList = blackiplist
@WhiteIpList = whiteiplist
end
def deserialize(params)
@BlackIpList = params['BlackIpList']
@WhiteIpList = params['WhiteIpList']
end
end
# GetRequestTargetNodeTypes请求参数结构体
class GetRequestTargetNodeTypesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# GetRequestTargetNodeTypes返回参数结构体
class GetRequestTargetNodeTypesResponse < TencentCloud::Common::AbstractModel
# @param TargetNodeTypes: 接收请求的目标节点类型列表
# @type TargetNodeTypes: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TargetNodeTypes, :RequestId
def initialize(targetnodetypes=nil, requestid=nil)
@TargetNodeTypes = targetnodetypes
@RequestId = requestid
end
def deserialize(params)
@TargetNodeTypes = params['TargetNodeTypes']
@RequestId = params['RequestId']
end
end
# 索引元数据字段
class IndexMetaField < TencentCloud::Common::AbstractModel
# @param IndexType: 索引类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexType: String
# @param IndexName: 索引名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexName: String
# @param IndexStatus: 索引状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStatus: String
# @param IndexStorage: 索引存储大小，单位Byte
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexStorage: Integer
# @param IndexCreateTime: 索引创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexCreateTime: String
# @param BackingIndices: 后备索引
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackingIndices: Array
# @param ClusterId: 索引所属集群ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterId: String
# @param ClusterName: 索引所属集群名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterName: String
# @param ClusterVersion: 索引所属集群版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterVersion: String
# @param IndexPolicyField: 索引生命周期字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexPolicyField: :class:`Tencentcloud::Es.v20180416.models.IndexPolicyField`
# @param IndexOptionsField: 索引自治字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexOptionsField: :class:`Tencentcloud::Es.v20180416.models.IndexOptionsField`
# @param IndexSettingsField: 索引配置字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexSettingsField: :class:`Tencentcloud::Es.v20180416.models.IndexSettingsField`
# @param AppId: 索引所属集群APP ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppId: Integer
# @param IndexDocs: 索引文档数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IndexDocs: Integer
attr_accessor :IndexType, :IndexName, :IndexStatus, :IndexStorage, :IndexCreateTime, :BackingIndices, :ClusterId, :ClusterName, :ClusterVersion, :IndexPolicyField, :IndexOptionsField, :IndexSettingsField, :AppId, :IndexDocs
def initialize(indextype=nil, indexname=nil, indexstatus=nil, indexstorage=nil, indexcreatetime=nil, backingindices=nil, clusterid=nil, clustername=nil, clusterversion=nil, indexpolicyfield=nil, indexoptionsfield=nil, indexsettingsfield=nil, appid=nil, indexdocs=nil)
@IndexType = indextype
@IndexName = indexname
@IndexStatus = indexstatus
@IndexStorage = indexstorage
@IndexCreateTime = indexcreatetime
@BackingIndices = backingindices
@ClusterId = clusterid
@ClusterName = clustername
@ClusterVersion = clusterversion
@IndexPolicyField = indexpolicyfield
@IndexOptionsField = indexoptionsfield
@IndexSettingsField = indexsettingsfield
@AppId = appid
@IndexDocs = indexdocs
end
def deserialize(params)
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@IndexStatus = params['IndexStatus']
@IndexStorage = params['IndexStorage']
@IndexCreateTime = params['IndexCreateTime']
unless params['BackingIndices'].nil?
@BackingIndices = []
params['BackingIndices'].each do |i|
backingindexmetafield_tmp = BackingIndexMetaField.new
backingindexmetafield_tmp.deserialize(i)
@BackingIndices << backingindexmetafield_tmp
end
end
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterVersion = params['ClusterVersion']
unless params['IndexPolicyField'].nil?
@IndexPolicyField = IndexPolicyField.new
@IndexPolicyField.deserialize(params['IndexPolicyField'])
end
unless params['IndexOptionsField'].nil?
@IndexOptionsField = IndexOptionsField.new
@IndexOptionsField.deserialize(params['IndexOptionsField'])
end
unless params['IndexSettingsField'].nil?
@IndexSettingsField = IndexSettingsField.new
@IndexSettingsField.deserialize(params['IndexSettingsField'])
end
@AppId = params['AppId']
@IndexDocs = params['IndexDocs']
end
end
# 索引自治字段
class IndexOptionsField < TencentCloud::Common::AbstractModel
# @param ExpireMaxAge: 过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireMaxAge: String
# @param ExpireMaxSize: 过期大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpireMaxSize: String
# @param RolloverMaxAge: 滚动周期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RolloverMaxAge: String
# @param RolloverDynamic: 是否开启动态滚动
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RolloverDynamic: String
# @param ShardNumDynamic: 是否开启动态分片
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ShardNumDynamic: String
# @param TimestampField: 时间分区字段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimestampField: String
# @param WriteMode: 写入模式
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WriteMode: String
attr_accessor :ExpireMaxAge, :ExpireMaxSize, :RolloverMaxAge, :RolloverDynamic, :ShardNumDynamic, :TimestampField, :WriteMode
def initialize(expiremaxage=nil, expiremaxsize=nil, rollovermaxage=nil, rolloverdynamic=nil, shardnumdynamic=nil, timestampfield=nil, writemode=nil)
@ExpireMaxAge = expiremaxage
@ExpireMaxSize = expiremaxsize
@RolloverMaxAge = rollovermaxage
@RolloverDynamic = rolloverdynamic
@ShardNumDynamic = shardnumdynamic
@TimestampField = timestampfield
@WriteMode = writemode
end
def deserialize(params)
@ExpireMaxAge = params['ExpireMaxAge']
@ExpireMaxSize = params['ExpireMaxSize']
@RolloverMaxAge = params['RolloverMaxAge']
@RolloverDynamic = params['RolloverDynamic']
@ShardNumDynamic = params['ShardNumDynamic']
@TimestampField = params['TimestampField']
@WriteMode = params['WriteMode']
end
end
# 索引生命周期字段
class IndexPolicyField < TencentCloud::Common::AbstractModel
# @param WarmEnable: 是否开启warm阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmEnable: String
# @param WarmMinAge: warm阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmMinAge: String
# @param ColdEnable: 是否开启cold阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdEnable: String
# @param ColdMinAge: cold阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdMinAge: String
# @param FrozenEnable: 是否开启frozen阶段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenEnable: String
# @param FrozenMinAge: frozen阶段转入时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenMinAge: String
# @param ColdAction: /
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdAction: String
attr_accessor :WarmEnable, :WarmMinAge, :ColdEnable, :ColdMinAge, :FrozenEnable, :FrozenMinAge, :ColdAction
def initialize(warmenable=nil, warmminage=nil, coldenable=nil, coldminage=nil, frozenenable=nil, frozenminage=nil, coldaction=nil)
@WarmEnable = warmenable
@WarmMinAge = warmminage
@ColdEnable = coldenable
@ColdMinAge = coldminage
@FrozenEnable = frozenenable
@FrozenMinAge = frozenminage
@ColdAction = coldaction
end
def deserialize(params)
@WarmEnable = params['WarmEnable']
@WarmMinAge = params['WarmMinAge']
@ColdEnable = params['ColdEnable']
@ColdMinAge = params['ColdMinAge']
@FrozenEnable = params['FrozenEnable']
@FrozenMinAge = params['FrozenMinAge']
@ColdAction = params['ColdAction']
end
end
# 索引配置字段
class IndexSettingsField < TencentCloud::Common::AbstractModel
# @param NumberOfShards: 索引主分片数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NumberOfShards: String
# @param NumberOfReplicas: 索引副本分片数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NumberOfReplicas: String
# @param RefreshInterval: 索引刷新频率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RefreshInterval: String
attr_accessor :NumberOfShards, :NumberOfReplicas, :RefreshInterval
def initialize(numberofshards=nil, numberofreplicas=nil, refreshinterval=nil)
@NumberOfShards = numberofshards
@NumberOfReplicas = numberofreplicas
@RefreshInterval = refreshinterval
end
def deserialize(params)
@NumberOfShards = params['NumberOfShards']
@NumberOfReplicas = params['NumberOfReplicas']
@RefreshInterval = params['RefreshInterval']
end
end
# 实例详细信息
class InstanceInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param AppId: 用户ID
# @type AppId: Integer
# @param Uin: 用户UIN
# @type Uin: String
# @param VpcUid: 实例所属VPC的UID
# @type VpcUid: String
# @param SubnetUid: 实例所属子网的UID
# @type SubnetUid: String
# @param Status: 实例状态，0:处理中,1:正常,-1停止,-2:销毁中,-3:已销毁, 2:创建集群时初始化中
# @type Status: Integer
# @param RenewFlag: 自动续费标识。取值范围：
# RENEW_FLAG_AUTO：自动续费
# RENEW_FLAG_MANUAL：不自动续费
# 默认取值：
# RENEW_FLAG_DEFAULT：不自动续费
# 若该参数指定为 RENEW_FLAG_AUTO，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
# @param ChargeType: 实例计费模式。取值范围： PREPAID：表示预付费，即包年包月 POSTPAID_BY_HOUR：表示后付费，即按量计费 CDHPAID：CDH付费，即只对CDH计费，不对CDH上的实例计费。
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长,单位:月
# @type ChargePeriod: Integer
# @param NodeType: 节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param NodeNum: 节点个数
# @type NodeNum: Integer
# @param CpuNum: 节点CPU核数
# @type CpuNum: Integer
# @param MemSize: 节点内存大小，单位GB
# @type MemSize: Integer
# @param DiskType: 节点磁盘类型
# @type DiskType: String
# @param DiskSize: 节点磁盘大小，单位GB
# @type DiskSize: Integer
# @param EsDomain: ES域名
# @type EsDomain: String
# @param EsVip: ES VIP
# @type EsVip: String
# @param EsPort: ES端口
# @type EsPort: Integer
# @param KibanaUrl: Kibana访问url
# @type KibanaUrl: String
# @param EsVersion: ES版本号
# @type EsVersion: String
# @param EsConfig: ES配置项
# @type EsConfig: String
# @param EsAcl: Kibana访问控制配置
# @type EsAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param CreateTime: 实例创建时间
# @type CreateTime: String
# @param UpdateTime: 实例最后修改操作时间
# @type UpdateTime: String
# @param Deadline: 实例到期时间
# @type Deadline: String
# @param InstanceType: 实例类型（实例类型标识，当前只有1,2两种）
# @type InstanceType: Integer
# @param IkConfig: Ik分词器配置
# @type IkConfig: :class:`Tencentcloud::Es.v20180416.models.EsDictionaryInfo`
# @param MasterNodeInfo: 专用主节点配置
# @type MasterNodeInfo: :class:`Tencentcloud::Es.v20180416.models.MasterNodeInfo`
# @param CosBackup: cos自动备份配置
# @type CosBackup: :class:`Tencentcloud::Es.v20180416.models.CosBackup`
# @param AllowCosBackup: 是否允许cos自动备份
# @type AllowCosBackup: Boolean
# @param TagList: 实例拥有的标签列表
# @type TagList: Array
# @param LicenseType: License类型<li>oss：开源版</li><li>basic：基础版</li><li>platinum：白金版</li>默认值platinum
# @type LicenseType: String
# @param EnableHotWarmMode: 是否为冷热集群<li>true: 冷热集群</li><li>false: 非冷热集群</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableHotWarmMode: Boolean
# @param WarmNodeType: 温节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmNodeType: String
# @param WarmNodeNum: 温节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmNodeNum: Integer
# @param WarmCpuNum: 温节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmCpuNum: Integer
# @param WarmMemSize: 温节点内存内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmMemSize: Integer
# @param WarmDiskType: 温节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmDiskType: String
# @param WarmDiskSize: 温节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WarmDiskSize: Integer
# @param NodeInfoList: 集群节点信息列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodeInfoList: Array
# @param EsPublicUrl: Es公网地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPublicUrl: String
# @param MultiZoneInfo: 多可用区网络信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MultiZoneInfo: Array
# @param DeployMode: 部署模式<li>0：单可用区</li><li>1：多可用区</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeployMode: Integer
# @param PublicAccess: ES公网访问状态<li>OPEN：开启</li><li>CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicAccess: String
# @param EsPublicAcl: ES公网访问控制配置
# @type EsPublicAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param KibanaPrivateUrl: Kibana内网地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPrivateUrl: String
# @param KibanaPublicAccess: Kibana公网访问状态<li>OPEN：开启</li><li>CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPublicAccess: String
# @param KibanaPrivateAccess: Kibana内网访问状态<li>OPEN：开启</li><li>CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaPrivateAccess: String
# @param SecurityType: 6.8（及以上版本）基础版是否开启xpack security认证<li>1：不开启</li><li>2：开启</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityType: Integer
# @param SceneType: 场景化模板类型：0、不开启；1、通用场景；2、日志场景；3、搜索场景
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SceneType: Integer
# @param KibanaConfig: Kibana配置项
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaConfig: String
# @param KibanaNodeInfo: Kibana节点信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaNodeInfo: :class:`Tencentcloud::Es.v20180416.models.KibanaNodeInfo`
# @param WebNodeTypeInfo: 可视化节点配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param Jdk: JDK类型，oracle或kona
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Jdk: String
# @param Protocol: 集群网络通讯协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Protocol: String
# @param SecurityGroups: 安全组id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SecurityGroups: Array
# @param ColdNodeType: 冷节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdNodeType: String
# @param ColdNodeNum: 冷节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdNodeNum: Integer
# @param ColdCpuNum: 冷节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdCpuNum: Integer
# @param ColdMemSize: 冷节点内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdMemSize: Integer
# @param ColdDiskType: 冷节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdDiskType: String
# @param ColdDiskSize: 冷节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ColdDiskSize: Integer
# @param FrozenNodeType: 冻节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenNodeType: String
# @param FrozenNodeNum: 冻节点个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenNodeNum: Integer
# @param FrozenCpuNum: 冻节点CPU核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenCpuNum: Integer
# @param FrozenMemSize: 冻节点内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenMemSize: Integer
# @param FrozenDiskType: 冻节点磁盘类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenDiskType: String
# @param FrozenDiskSize: 冻节点磁盘大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FrozenDiskSize: Integer
# @param HealthStatus: 集群健康状态 -1 未知；0 Green; 1 Yellow; 2 Red
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HealthStatus: Integer
# @param EsPrivateUrl: https集群内网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPrivateUrl: String
# @param EsPrivateDomain: https集群内网域名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsPrivateDomain: String
# @param EsConfigSets: 集群的配置组信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EsConfigSets: Array
# @param OperationDuration: 集群可维护时间段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
# @param OptionalWebServiceInfos: web节点列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OptionalWebServiceInfos: Array
# @param AutoIndexEnabled: 自治索引开关
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutoIndexEnabled: Boolean
# @param EnableHybridStorage: 是否支持存储计算分离
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableHybridStorage: Boolean
# @param ProcessPercent: 流程进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessPercent: Float
# @param KibanaAlteringPublicAccess: Kibana的altering外网告警策略<li>OPEN：开启</li><li>CLOSE：关闭
# 注意：此字段可能返回 null，表示取不到有效值。
# @type KibanaAlteringPublicAccess: String
attr_accessor :InstanceId, :InstanceName, :Region, :Zone, :AppId, :Uin, :VpcUid, :SubnetUid, :Status, :RenewFlag, :ChargeType, :ChargePeriod, :NodeType, :NodeNum, :CpuNum, :MemSize, :DiskType, :DiskSize, :EsDomain, :EsVip, :EsPort, :KibanaUrl, :EsVersion, :EsConfig, :EsAcl, :CreateTime, :UpdateTime, :Deadline, :InstanceType, :IkConfig, :MasterNodeInfo, :CosBackup, :AllowCosBackup, :TagList, :LicenseType, :EnableHotWarmMode, :WarmNodeType, :WarmNodeNum, :WarmCpuNum, :WarmMemSize, :WarmDiskType, :WarmDiskSize, :NodeInfoList, :EsPublicUrl, :MultiZoneInfo, :DeployMode, :PublicAccess, :EsPublicAcl, :KibanaPrivateUrl, :KibanaPublicAccess, :KibanaPrivateAccess, :SecurityType, :SceneType, :KibanaConfig, :KibanaNodeInfo, :WebNodeTypeInfo, :Jdk, :Protocol, :SecurityGroups, :ColdNodeType, :ColdNodeNum, :ColdCpuNum, :ColdMemSize, :ColdDiskType, :ColdDiskSize, :FrozenNodeType, :FrozenNodeNum, :FrozenCpuNum, :FrozenMemSize, :FrozenDiskType, :FrozenDiskSize, :HealthStatus, :EsPrivateUrl, :EsPrivateDomain, :EsConfigSets, :OperationDuration, :OptionalWebServiceInfos, :AutoIndexEnabled, :EnableHybridStorage, :ProcessPercent, :KibanaAlteringPublicAccess
def initialize(instanceid=nil, instancename=nil, region=nil, zone=nil, appid=nil, uin=nil, vpcuid=nil, subnetuid=nil, status=nil, renewflag=nil, chargetype=nil, chargeperiod=nil, nodetype=nil, nodenum=nil, cpunum=nil, memsize=nil, disktype=nil, disksize=nil, esdomain=nil, esvip=nil, esport=nil, kibanaurl=nil, esversion=nil, esconfig=nil, esacl=nil, createtime=nil, updatetime=nil, deadline=nil, instancetype=nil, ikconfig=nil, masternodeinfo=nil, cosbackup=nil, allowcosbackup=nil, taglist=nil, licensetype=nil, enablehotwarmmode=nil, warmnodetype=nil, warmnodenum=nil, warmcpunum=nil, warmmemsize=nil, warmdisktype=nil, warmdisksize=nil, nodeinfolist=nil, espublicurl=nil, multizoneinfo=nil, deploymode=nil, publicaccess=nil, espublicacl=nil, kibanaprivateurl=nil, kibanapublicaccess=nil, kibanaprivateaccess=nil, securitytype=nil, scenetype=nil, kibanaconfig=nil, kibananodeinfo=nil, webnodetypeinfo=nil, jdk=nil, protocol=nil, securitygroups=nil, coldnodetype=nil, coldnodenum=nil, coldcpunum=nil, coldmemsize=nil, colddisktype=nil, colddisksize=nil, frozennodetype=nil, frozennodenum=nil, frozencpunum=nil, frozenmemsize=nil, frozendisktype=nil, frozendisksize=nil, healthstatus=nil, esprivateurl=nil, esprivatedomain=nil, esconfigsets=nil, operationduration=nil, optionalwebserviceinfos=nil, autoindexenabled=nil, enablehybridstorage=nil, processpercent=nil, kibanaalteringpublicaccess=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Region = region
@Zone = zone
@AppId = appid
@Uin = uin
@VpcUid = vpcuid
@SubnetUid = subnetuid
@Status = status
@RenewFlag = renewflag
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@NodeType = nodetype
@NodeNum = nodenum
@CpuNum = cpunum
@MemSize = memsize
@DiskType = disktype
@DiskSize = disksize
@EsDomain = esdomain
@EsVip = esvip
@EsPort = esport
@KibanaUrl = kibanaurl
@EsVersion = esversion
@EsConfig = esconfig
@EsAcl = esacl
@CreateTime = createtime
@UpdateTime = updatetime
@Deadline = deadline
@InstanceType = instancetype
@IkConfig = ikconfig
@MasterNodeInfo = masternodeinfo
@CosBackup = cosbackup
@AllowCosBackup = allowcosbackup
@TagList = taglist
@LicenseType = licensetype
@EnableHotWarmMode = enablehotwarmmode
@WarmNodeType = warmnodetype
@WarmNodeNum = warmnodenum
@WarmCpuNum = warmcpunum
@WarmMemSize = warmmemsize
@WarmDiskType = warmdisktype
@WarmDiskSize = warmdisksize
@NodeInfoList = nodeinfolist
@EsPublicUrl = espublicurl
@MultiZoneInfo = multizoneinfo
@DeployMode = deploymode
@PublicAccess = publicaccess
@EsPublicAcl = espublicacl
@KibanaPrivateUrl = kibanaprivateurl
@KibanaPublicAccess = kibanapublicaccess
@KibanaPrivateAccess = kibanaprivateaccess
@SecurityType = securitytype
@SceneType = scenetype
@KibanaConfig = kibanaconfig
@KibanaNodeInfo = kibananodeinfo
@WebNodeTypeInfo = webnodetypeinfo
@Jdk = jdk
@Protocol = protocol
@SecurityGroups = securitygroups
@ColdNodeType = coldnodetype
@ColdNodeNum = coldnodenum
@ColdCpuNum = coldcpunum
@ColdMemSize = coldmemsize
@ColdDiskType = colddisktype
@ColdDiskSize = colddisksize
@FrozenNodeType = frozennodetype
@FrozenNodeNum = frozennodenum
@FrozenCpuNum = frozencpunum
@FrozenMemSize = frozenmemsize
@FrozenDiskType = frozendisktype
@FrozenDiskSize = frozendisksize
@HealthStatus = healthstatus
@EsPrivateUrl = esprivateurl
@EsPrivateDomain = esprivatedomain
@EsConfigSets = esconfigsets
@OperationDuration = operationduration
@OptionalWebServiceInfos = optionalwebserviceinfos
@AutoIndexEnabled = autoindexenabled
@EnableHybridStorage = enablehybridstorage
@ProcessPercent = processpercent
@KibanaAlteringPublicAccess = kibanaalteringpublicaccess
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Region = params['Region']
@Zone = params['Zone']
@AppId = params['AppId']
@Uin = params['Uin']
@VpcUid = params['VpcUid']
@SubnetUid = params['SubnetUid']
@Status = params['Status']
@RenewFlag = params['RenewFlag']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@NodeType = params['NodeType']
@NodeNum = params['NodeNum']
@CpuNum = params['CpuNum']
@MemSize = params['MemSize']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@EsDomain = params['EsDomain']
@EsVip = params['EsVip']
@EsPort = params['EsPort']
@KibanaUrl = params['KibanaUrl']
@EsVersion = params['EsVersion']
@EsConfig = params['EsConfig']
unless params['EsAcl'].nil?
@EsAcl = EsAcl.new
@EsAcl.deserialize(params['EsAcl'])
end
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@Deadline = params['Deadline']
@InstanceType = params['InstanceType']
unless params['IkConfig'].nil?
@IkConfig = EsDictionaryInfo.new
@IkConfig.deserialize(params['IkConfig'])
end
unless params['MasterNodeInfo'].nil?
@MasterNodeInfo = MasterNodeInfo.new
@MasterNodeInfo.deserialize(params['MasterNodeInfo'])
end
unless params['CosBackup'].nil?
@CosBackup = CosBackup.new
@CosBackup.deserialize(params['CosBackup'])
end
@AllowCosBackup = params['AllowCosBackup']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@LicenseType = params['LicenseType']
@EnableHotWarmMode = params['EnableHotWarmMode']
@WarmNodeType = params['WarmNodeType']
@WarmNodeNum = params['WarmNodeNum']
@WarmCpuNum = params['WarmCpuNum']
@WarmMemSize = params['WarmMemSize']
@WarmDiskType = params['WarmDiskType']
@WarmDiskSize = params['WarmDiskSize']
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
@EsPublicUrl = params['EsPublicUrl']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@DeployMode = params['DeployMode']
@PublicAccess = params['PublicAccess']
unless params['EsPublicAcl'].nil?
@EsPublicAcl = EsAcl.new
@EsPublicAcl.deserialize(params['EsPublicAcl'])
end
@KibanaPrivateUrl = params['KibanaPrivateUrl']
@KibanaPublicAccess = params['KibanaPublicAccess']
@KibanaPrivateAccess = params['KibanaPrivateAccess']
@SecurityType = params['SecurityType']
@SceneType = params['SceneType']
@KibanaConfig = params['KibanaConfig']
unless params['KibanaNodeInfo'].nil?
@KibanaNodeInfo = KibanaNodeInfo.new
@KibanaNodeInfo.deserialize(params['KibanaNodeInfo'])
end
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@Jdk = params['Jdk']
@Protocol = params['Protocol']
@SecurityGroups = params['SecurityGroups']
@ColdNodeType = params['ColdNodeType']
@ColdNodeNum = params['ColdNodeNum']
@ColdCpuNum = params['ColdCpuNum']
@ColdMemSize = params['ColdMemSize']
@ColdDiskType = params['ColdDiskType']
@ColdDiskSize = params['ColdDiskSize']
@FrozenNodeType = params['FrozenNodeType']
@FrozenNodeNum = params['FrozenNodeNum']
@FrozenCpuNum = params['FrozenCpuNum']
@FrozenMemSize = params['FrozenMemSize']
@FrozenDiskType = params['FrozenDiskType']
@FrozenDiskSize = params['FrozenDiskSize']
@HealthStatus = params['HealthStatus']
@EsPrivateUrl = params['EsPrivateUrl']
@EsPrivateDomain = params['EsPrivateDomain']
unless params['EsConfigSets'].nil?
@EsConfigSets = []
params['EsConfigSets'].each do |i|
esconfigsetinfo_tmp = EsConfigSetInfo.new
esconfigsetinfo_tmp.deserialize(i)
@EsConfigSets << esconfigsetinfo_tmp
end
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
unless params['OptionalWebServiceInfos'].nil?
@OptionalWebServiceInfos = []
params['OptionalWebServiceInfos'].each do |i|
optionalwebserviceinfo_tmp = OptionalWebServiceInfo.new
optionalwebserviceinfo_tmp.deserialize(i)
@OptionalWebServiceInfos << optionalwebserviceinfo_tmp
end
end
@AutoIndexEnabled = params['AutoIndexEnabled']
@EnableHybridStorage = params['EnableHybridStorage']
@ProcessPercent = params['ProcessPercent']
@KibanaAlteringPublicAccess = params['KibanaAlteringPublicAccess']
end
end
# ES集群日志详细信息
class InstanceLog < TencentCloud::Common::AbstractModel
# @param Time: 日志时间
# @type Time: String
# @param Level: 日志级别
# @type Level: String
# @param Ip: 集群节点ip
# @type Ip: String
# @param Message: 日志内容
# @type Message: String
# @param NodeID: 集群节点ID
# @type NodeID: String
attr_accessor :Time, :Level, :Ip, :Message, :NodeID
def initialize(time=nil, level=nil, ip=nil, message=nil, nodeid=nil)
@Time = time
@Level = level
@Ip = ip
@Message = message
@NodeID = nodeid
end
def deserialize(params)
@Time = params['Time']
@Level = params['Level']
@Ip = params['Ip']
@Message = params['Message']
@NodeID = params['NodeID']
end
end
# OperationDetail使用此结构的数组描述新旧配置
class KeyValue < TencentCloud::Common::AbstractModel
# @param Key: 键
# @type Key: String
# @param Value: 值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# 实例Kibana节点相关信息
class KibanaNodeInfo < TencentCloud::Common::AbstractModel
# @param KibanaNodeType: Kibana节点规格
# @type KibanaNodeType: String
# @param KibanaNodeNum: Kibana节点个数
# @type KibanaNodeNum: Integer
# @param KibanaNodeCpuNum: Kibana节点CPU数
# @type KibanaNodeCpuNum: Integer
# @param KibanaNodeMemSize: Kibana节点内存GB
# @type KibanaNodeMemSize: Integer
# @param KibanaNodeDiskType: Kibana节点磁盘类型
# @type KibanaNodeDiskType: String
# @param KibanaNodeDiskSize: Kibana节点磁盘大小
# @type KibanaNodeDiskSize: Integer
attr_accessor :KibanaNodeType, :KibanaNodeNum, :KibanaNodeCpuNum, :KibanaNodeMemSize, :KibanaNodeDiskType, :KibanaNodeDiskSize
def initialize(kibananodetype=nil, kibananodenum=nil, kibananodecpunum=nil, kibananodememsize=nil, kibananodedisktype=nil, kibananodedisksize=nil)
@KibanaNodeType = kibananodetype
@KibanaNodeNum = kibananodenum
@KibanaNodeCpuNum = kibananodecpunum
@KibanaNodeMemSize = kibananodememsize
@KibanaNodeDiskType = kibananodedisktype
@KibanaNodeDiskSize = kibananodedisksize
end
def deserialize(params)
@KibanaNodeType = params['KibanaNodeType']
@KibanaNodeNum = params['KibanaNodeNum']
@KibanaNodeCpuNum = params['KibanaNodeCpuNum']
@KibanaNodeMemSize = params['KibanaNodeMemSize']
@KibanaNodeDiskType = params['KibanaNodeDiskType']
@KibanaNodeDiskSize = params['KibanaNodeDiskSize']
end
end
# Kibana视图数据
class KibanaView < TencentCloud::Common::AbstractModel
# @param Ip: Kibana节点IP
# @type Ip: String
# @param DiskSize: 节点总磁盘大小
# @type DiskSize: Integer
# @param DiskUsage: 磁盘使用率
# @type DiskUsage: Float
# @param MemSize: 节点内存大小
# @type MemSize: Integer
# @param MemUsage: 内存使用率
# @type MemUsage: Float
# @param CpuNum: 节点cpu个数
# @type CpuNum: Integer
# @param CpuUsage: cpu使用率
# @type CpuUsage: Float
# @param Zone: 可用区
# @type Zone: String
# @param NodeId: ts-0noqayxu-az6-hot-03222010-0
# @type NodeId: String
attr_accessor :Ip, :DiskSize, :DiskUsage, :MemSize, :MemUsage, :CpuNum, :CpuUsage, :Zone, :NodeId
def initialize(ip=nil, disksize=nil, diskusage=nil, memsize=nil, memusage=nil, cpunum=nil, cpuusage=nil, zone=nil, nodeid=nil)
@Ip = ip
@DiskSize = disksize
@DiskUsage = diskusage
@MemSize = memsize
@MemUsage = memusage
@CpuNum = cpunum
@CpuUsage = cpuusage
@Zone = zone
@NodeId = nodeid
end
def deserialize(params)
@Ip = params['Ip']
@DiskSize = params['DiskSize']
@DiskUsage = params['DiskUsage']
@MemSize = params['MemSize']
@MemUsage = params['MemUsage']
@CpuNum = params['CpuNum']
@CpuUsage = params['CpuUsage']
@Zone = params['Zone']
@NodeId = params['NodeId']
end
end
# 节点本地盘信息
class LocalDiskInfo < TencentCloud::Common::AbstractModel
# @param LocalDiskType: 本地盘类型<li>LOCAL_SATA：大数据型</li><li>NVME_SSD：高IO型</li>
# @type LocalDiskType: String
# @param LocalDiskSize: 本地盘单盘大小
# @type LocalDiskSize: Integer
# @param LocalDiskCount: 本地盘块数
# @type LocalDiskCount: Integer
attr_accessor :LocalDiskType, :LocalDiskSize, :LocalDiskCount
def initialize(localdisktype=nil, localdisksize=nil, localdiskcount=nil)
@LocalDiskType = localdisktype
@LocalDiskSize = localdisksize
@LocalDiskCount = localdiskcount
end
def deserialize(params)
@LocalDiskType = params['LocalDiskType']
@LocalDiskSize = params['LocalDiskSize']
@LocalDiskCount = params['LocalDiskCount']
end
end
# Logstash绑定的ES集群信息
class LogstashBindedES < TencentCloud::Common::AbstractModel
# @param ESInstanceId: ES集群ID
# @type ESInstanceId: String
# @param ESUserName: ES集群用户名
# @type ESUserName: String
# @param ESPassword: ES集群密码
# @type ESPassword: String
attr_accessor :ESInstanceId, :ESUserName, :ESPassword
def initialize(esinstanceid=nil, esusername=nil, espassword=nil)
@ESInstanceId = esinstanceid
@ESUserName = esusername
@ESPassword = espassword
end
def deserialize(params)
@ESInstanceId = params['ESInstanceId']
@ESUserName = params['ESUserName']
@ESPassword = params['ESPassword']
end
end
# Logstash扩展文件信息
class LogstashExtendedFile < TencentCloud::Common::AbstractModel
# @param Name: 扩展文件名称
# @type Name: String
# @param Size: 扩展文件大小，单位B
# @type Size: Integer
attr_accessor :Name, :Size
def initialize(name=nil, size=nil)
@Name = name
@Size = size
end
def deserialize(params)
@Name = params['Name']
@Size = params['Size']
end
end
# Logstash实例详细信息
class LogstashInstanceInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param AppId: 用户ID
# @type AppId: Integer
# @param Uin: 用户UIN
# @type Uin: String
# @param VpcId: 实例所属VPC的ID
# @type VpcId: String
# @param SubnetId: 实例所属子网的ID
# @type SubnetId: String
# @param Status: 实例状态，0:处理中,1:正常,-1停止,-2:销毁中,-3:已销毁
# @type Status: Integer
# @param ChargeType: 实例计费模式。取值范围： PREPAID：表示预付费，即包年包月 POSTPAID_BY_HOUR：表示后付费，即按量计费 CDHPAID：CDH付费，即只对CDH计费，不对CDH上的实例计费。
# @type ChargeType: String
# @param ChargePeriod: 包年包月购买时长,单位:月
# @type ChargePeriod: Integer
# @param RenewFlag: 自动续费标识。取值范围： NOTIFY_AND_AUTO_RENEW：通知过期且自动续费 NOTIFY_AND_MANUAL_RENEW：通知过期不自动续费 DISABLE_NOTIFY_AND_MANUAL_RENEW：不通知过期不自动续费 默认取值：NOTIFY_AND_AUTO_RENEW。若该参数指定为NOTIFY_AND_AUTO_RENEW，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
# @param NodeType: 节点规格<li>LOGSTASH.S1.SMALL2：1核2G</li><li>LOGSTASH.S1.MEDIUM4：2核4G</li><li>LOGSTASH.S1.MEDIUM8：2核8G</li><li>LOGSTASH.S1.LARGE16：4核16G</li><li>LOGSTASH.S1.2XLARGE32：8核32G</li><li>LOGSTASH.S1.4XLARGE32：16核32G</li><li>LOGSTASH.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param NodeNum: 节点个数
# @type NodeNum: Integer
# @param DiskType: 节点磁盘类型
# @type DiskType: String
# @param DiskSize: 节点磁盘大小，单位GB
# @type DiskSize: Integer
# @param LogstashVersion: Logstash版本号
# @type LogstashVersion: String
# @param LicenseType: License类型<li>oss：开源版</li><li>xpack：基础版</li>默认值xpack
# @type LicenseType: String
# @param CreateTime: 实例创建时间
# @type CreateTime: String
# @param UpdateTime: 实例最后修改操作时间
# @type UpdateTime: String
# @param Deadline: 实例到期时间
# @type Deadline: String
# @param Nodes: 实例节点类型
# @type Nodes: Array
# @param BindedESInstanceId: 实例绑定的ES集群ID
# @type BindedESInstanceId: String
# @param YMLConfig: 实例的YML配置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type YMLConfig: String
# @param ExtendedFiles: 扩展文件列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExtendedFiles: Array
# @param OperationDuration: 可维护时间段
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDuration`
# @param CpuNum: CPU数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuNum: Integer
# @param TagList: 实例标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagList: Array
# @param MemSize: 内存大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemSize: Integer
attr_accessor :InstanceId, :InstanceName, :Region, :Zone, :AppId, :Uin, :VpcId, :SubnetId, :Status, :ChargeType, :ChargePeriod, :RenewFlag, :NodeType, :NodeNum, :DiskType, :DiskSize, :LogstashVersion, :LicenseType, :CreateTime, :UpdateTime, :Deadline, :Nodes, :BindedESInstanceId, :YMLConfig, :ExtendedFiles, :OperationDuration, :CpuNum, :TagList, :MemSize
def initialize(instanceid=nil, instancename=nil, region=nil, zone=nil, appid=nil, uin=nil, vpcid=nil, subnetid=nil, status=nil, chargetype=nil, chargeperiod=nil, renewflag=nil, nodetype=nil, nodenum=nil, disktype=nil, disksize=nil, logstashversion=nil, licensetype=nil, createtime=nil, updatetime=nil, deadline=nil, nodes=nil, bindedesinstanceid=nil, ymlconfig=nil, extendedfiles=nil, operationduration=nil, cpunum=nil, taglist=nil, memsize=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Region = region
@Zone = zone
@AppId = appid
@Uin = uin
@VpcId = vpcid
@SubnetId = subnetid
@Status = status
@ChargeType = chargetype
@ChargePeriod = chargeperiod
@RenewFlag = renewflag
@NodeType = nodetype
@NodeNum = nodenum
@DiskType = disktype
@DiskSize = disksize
@LogstashVersion = logstashversion
@LicenseType = licensetype
@CreateTime = createtime
@UpdateTime = updatetime
@Deadline = deadline
@Nodes = nodes
@BindedESInstanceId = bindedesinstanceid
@YMLConfig = ymlconfig
@ExtendedFiles = extendedfiles
@OperationDuration = operationduration
@CpuNum = cpunum
@TagList = taglist
@MemSize = memsize
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Region = params['Region']
@Zone = params['Zone']
@AppId = params['AppId']
@Uin = params['Uin']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Status = params['Status']
@ChargeType = params['ChargeType']
@ChargePeriod = params['ChargePeriod']
@RenewFlag = params['RenewFlag']
@NodeType = params['NodeType']
@NodeNum = params['NodeNum']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@LogstashVersion = params['LogstashVersion']
@LicenseType = params['LicenseType']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@Deadline = params['Deadline']
unless params['Nodes'].nil?
@Nodes = []
params['Nodes'].each do |i|
logstashnodeinfo_tmp = LogstashNodeInfo.new
logstashnodeinfo_tmp.deserialize(i)
@Nodes << logstashnodeinfo_tmp
end
end
@BindedESInstanceId = params['BindedESInstanceId']
@YMLConfig = params['YMLConfig']
unless params['ExtendedFiles'].nil?
@ExtendedFiles = []
params['ExtendedFiles'].each do |i|
logstashextendedfile_tmp = LogstashExtendedFile.new
logstashextendedfile_tmp.deserialize(i)
@ExtendedFiles << logstashextendedfile_tmp
end
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDuration.new
@OperationDuration.deserialize(params['OperationDuration'])
end
@CpuNum = params['CpuNum']
unless params['TagList'].nil?
@TagList = []
params['TagList'].each do |i|
taginfo_tmp = TagInfo.new
taginfo_tmp.deserialize(i)
@TagList << taginfo_tmp
end
end
@MemSize = params['MemSize']
end
end
# Logstash节点信息
class LogstashNodeInfo < TencentCloud::Common::AbstractModel
# @param NodeId: 节点ID
# @type NodeId: String
# @param Ip: 节点IP
# @type Ip: String
# @param Port: 节点端口
# @type Port: Integer
attr_accessor :NodeId, :Ip, :Port
def initialize(nodeid=nil, ip=nil, port=nil)
@NodeId = nodeid
@Ip = ip
@Port = port
end
def deserialize(params)
@NodeId = params['NodeId']
@Ip = params['Ip']
@Port = params['Port']
end
end
# Logstash管道信息
class LogstashPipeline < TencentCloud::Common::AbstractModel
# @param PipelineId: 管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PipelineDesc: String
# @param Config: 管道配置内容
# @type Config: String
# @param Workers: 管道的Worker数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Workers: Integer
# @param BatchSize: 管道批处理大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchSize: Integer
# @param BatchDelay: 管道批处理延迟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchDelay: Integer
# @param QueueType: 管道缓冲队列类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueType: String
# @param QueueMaxBytes: 管道缓冲队列大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueMaxBytes: String
# @param QueueCheckPointWrites: 管道缓冲队列检查点写入数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueCheckPointWrites: Integer
attr_accessor :PipelineId, :PipelineDesc, :Config, :Workers, :BatchSize, :BatchDelay, :QueueType, :QueueMaxBytes, :QueueCheckPointWrites
def initialize(pipelineid=nil, pipelinedesc=nil, config=nil, workers=nil, batchsize=nil, batchdelay=nil, queuetype=nil, queuemaxbytes=nil, queuecheckpointwrites=nil)
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
@Config = config
@Workers = workers
@BatchSize = batchsize
@BatchDelay = batchdelay
@QueueType = queuetype
@QueueMaxBytes = queuemaxbytes
@QueueCheckPointWrites = queuecheckpointwrites
end
def deserialize(params)
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
@Config = params['Config']
@Workers = params['Workers']
@BatchSize = params['BatchSize']
@BatchDelay = params['BatchDelay']
@QueueType = params['QueueType']
@QueueMaxBytes = params['QueueMaxBytes']
@QueueCheckPointWrites = params['QueueCheckPointWrites']
end
end
# Logstash管道信息
class LogstashPipelineInfo < TencentCloud::Common::AbstractModel
# @param PipelineId: 管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PipelineDesc: String
# @param Config: 管道配置内容
# @type Config: String
# @param Status: 管道状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param Workers: 管道的Worker数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Workers: Integer
# @param BatchSize: 管道批处理大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchSize: Integer
# @param BatchDelay: 管道批处理延迟
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BatchDelay: Integer
# @param QueueType: 管道缓冲队列类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueType: String
# @param QueueMaxBytes: 管道缓冲队列大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueMaxBytes: String
# @param QueueCheckPointWrites: 管道缓冲队列检查点写入数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type QueueCheckPointWrites: Integer
attr_accessor :PipelineId, :PipelineDesc, :Config, :Status, :Workers, :BatchSize, :BatchDelay, :QueueType, :QueueMaxBytes, :QueueCheckPointWrites
def initialize(pipelineid=nil, pipelinedesc=nil, config=nil, status=nil, workers=nil, batchsize=nil, batchdelay=nil, queuetype=nil, queuemaxbytes=nil, queuecheckpointwrites=nil)
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
@Config = config
@Status = status
@Workers = workers
@BatchSize = batchsize
@BatchDelay = batchdelay
@QueueType = queuetype
@QueueMaxBytes = queuemaxbytes
@QueueCheckPointWrites = queuecheckpointwrites
end
def deserialize(params)
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
@Config = params['Config']
@Status = params['Status']
@Workers = params['Workers']
@BatchSize = params['BatchSize']
@BatchDelay = params['BatchDelay']
@QueueType = params['QueueType']
@QueueMaxBytes = params['QueueMaxBytes']
@QueueCheckPointWrites = params['QueueCheckPointWrites']
end
end
# 实例专用主节点相关信息
class MasterNodeInfo < TencentCloud::Common::AbstractModel
# @param EnableDedicatedMaster: 是否启用了专用主节点
# @type EnableDedicatedMaster: Boolean
# @param MasterNodeType: 专用主节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type MasterNodeType: String
# @param MasterNodeNum: 专用主节点个数
# @type MasterNodeNum: Integer
# @param MasterNodeCpuNum: 专用主节点CPU核数
# @type MasterNodeCpuNum: Integer
# @param MasterNodeMemSize: 专用主节点内存大小，单位GB
# @type MasterNodeMemSize: Integer
# @param MasterNodeDiskSize: 专用主节点磁盘大小，单位GB
# @type MasterNodeDiskSize: Integer
# @param MasterNodeDiskType: 专用主节点磁盘类型
# @type MasterNodeDiskType: String
attr_accessor :EnableDedicatedMaster, :MasterNodeType, :MasterNodeNum, :MasterNodeCpuNum, :MasterNodeMemSize, :MasterNodeDiskSize, :MasterNodeDiskType
def initialize(enablededicatedmaster=nil, masternodetype=nil, masternodenum=nil, masternodecpunum=nil, masternodememsize=nil, masternodedisksize=nil, masternodedisktype=nil)
@EnableDedicatedMaster = enablededicatedmaster
@MasterNodeType = masternodetype
@MasterNodeNum = masternodenum
@MasterNodeCpuNum = masternodecpunum
@MasterNodeMemSize = masternodememsize
@MasterNodeDiskSize = masternodedisksize
@MasterNodeDiskType = masternodedisktype
end
def deserialize(params)
@EnableDedicatedMaster = params['EnableDedicatedMaster']
@MasterNodeType = params['MasterNodeType']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeCpuNum = params['MasterNodeCpuNum']
@MasterNodeMemSize = params['MasterNodeMemSize']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@MasterNodeDiskType = params['MasterNodeDiskType']
end
end
# ModifyEsVipSecurityGroup请求参数结构体
class ModifyEsVipSecurityGroupRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: es集群的实例id
# @type InstanceId: String
# @param SecurityGroupIds: 安全组id列表
# @type SecurityGroupIds: Array
attr_accessor :InstanceId, :SecurityGroupIds
def initialize(instanceid=nil, securitygroupids=nil)
@InstanceId = instanceid
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# ModifyEsVipSecurityGroup返回参数结构体
class ModifyEsVipSecurityGroupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 集群中一种节点类型（如热数据节点，冷数据节点，专用主节点等）的规格描述信息，包括节点类型，节点个数，节点规格，磁盘类型，磁盘大小等, Type不指定时默认为热数据节点；如果节点为master节点，则DiskType和DiskSize参数会被忽略（主节点无数据盘）
class NodeInfo < TencentCloud::Common::AbstractModel
# @param NodeNum: 节点数量
# @type NodeNum: Integer
# @param NodeType: 节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param Type: 节点类型<li>hotData: 热数据节点</li>
# <li>warmData: 冷数据节点</li>
# <li>dedicatedMaster: 专用主节点</li>
# 默认值为hotData
# @type Type: String
# @param DiskType: 节点磁盘类型<li>CLOUD_SSD：SSD云硬盘</li><li>CLOUD_PREMIUM：高硬能云硬盘</li>默认值CLOUD_SSD
# @type DiskType: String
# @param DiskSize: 节点磁盘容量（单位GB）
# @type DiskSize: Integer
# @param LocalDiskInfo: 节点本地盘信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalDiskInfo: :class:`Tencentcloud::Es.v20180416.models.LocalDiskInfo`
# @param DiskCount: 节点磁盘块数
# @type DiskCount: Integer
# @param DiskEncrypt: 节点磁盘是否加密 0: 不加密，1: 加密；默认不加密
# @type DiskEncrypt: Integer
# @param CpuNum: cpu数目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuNum: Integer
# @param MemSize: 内存大小，单位GB
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemSize: Integer
# @param DiskEnhance: /
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiskEnhance: Integer
attr_accessor :NodeNum, :NodeType, :Type, :DiskType, :DiskSize, :LocalDiskInfo, :DiskCount, :DiskEncrypt, :CpuNum, :MemSize, :DiskEnhance
def initialize(nodenum=nil, nodetype=nil, type=nil, disktype=nil, disksize=nil, localdiskinfo=nil, diskcount=nil, diskencrypt=nil, cpunum=nil, memsize=nil, diskenhance=nil)
@NodeNum = nodenum
@NodeType = nodetype
@Type = type
@DiskType = disktype
@DiskSize = disksize
@LocalDiskInfo = localdiskinfo
@DiskCount = diskcount
@DiskEncrypt = diskencrypt
@CpuNum = cpunum
@MemSize = memsize
@DiskEnhance = diskenhance
end
def deserialize(params)
@NodeNum = params['NodeNum']
@NodeType = params['NodeType']
@Type = params['Type']
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
unless params['LocalDiskInfo'].nil?
@LocalDiskInfo = LocalDiskInfo.new
@LocalDiskInfo.deserialize(params['LocalDiskInfo'])
end
@DiskCount = params['DiskCount']
@DiskEncrypt = params['DiskEncrypt']
@CpuNum = params['CpuNum']
@MemSize = params['MemSize']
@DiskEnhance = params['DiskEnhance']
end
end
# 节点维度视图数据
class NodeView < TencentCloud::Common::AbstractModel
# @param NodeId: 节点ID
# @type NodeId: String
# @param NodeIp: 节点IP
# @type NodeIp: String
# @param Visible: 节点是否可见
# @type Visible: Float
# @param Break: 是否熔断
# @type Break: Float
# @param DiskSize: 节点总磁盘大小
# @type DiskSize: Integer
# @param DiskUsage: 磁盘使用率
# @type DiskUsage: Float
# @param MemSize: 节点内存大小，单位GB
# @type MemSize: Integer
# @param MemUsage: 内存使用率
# @type MemUsage: Float
# @param CpuNum: 节点cpu个数
# @type CpuNum: Integer
# @param CpuUsage: cpu使用率
# @type CpuUsage: Float
# @param Zone: 可用区
# @type Zone: String
# @param NodeRole: 节点角色
# @type NodeRole: String
# @param NodeHttpIp: 节点HTTP IP
# @type NodeHttpIp: String
# @param JvmMemUsage: JVM内存使用率
# @type JvmMemUsage: Float
# @param ShardNum: 节点分片数
# @type ShardNum: Integer
# @param DiskIds: 节点上磁盘ID列表
# @type DiskIds: Array
# @param Hidden: 是否为隐藏可用区
# @type Hidden: Boolean
attr_accessor :NodeId, :NodeIp, :Visible, :Break, :DiskSize, :DiskUsage, :MemSize, :MemUsage, :CpuNum, :CpuUsage, :Zone, :NodeRole, :NodeHttpIp, :JvmMemUsage, :ShardNum, :DiskIds, :Hidden
def initialize(nodeid=nil, nodeip=nil, visible=nil, _break=nil, disksize=nil, diskusage=nil, memsize=nil, memusage=nil, cpunum=nil, cpuusage=nil, zone=nil, noderole=nil, nodehttpip=nil, jvmmemusage=nil, shardnum=nil, diskids=nil, hidden=nil)
@NodeId = nodeid
@NodeIp = nodeip
@Visible = visible
@Break = _break
@DiskSize = disksize
@DiskUsage = diskusage
@MemSize = memsize
@MemUsage = memusage
@CpuNum = cpunum
@CpuUsage = cpuusage
@Zone = zone
@NodeRole = noderole
@NodeHttpIp = nodehttpip
@JvmMemUsage = jvmmemusage
@ShardNum = shardnum
@DiskIds = diskids
@Hidden = hidden
end
def deserialize(params)
@NodeId = params['NodeId']
@NodeIp = params['NodeIp']
@Visible = params['Visible']
@Break = params['Break']
@DiskSize = params['DiskSize']
@DiskUsage = params['DiskUsage']
@MemSize = params['MemSize']
@MemUsage = params['MemUsage']
@CpuNum = params['CpuNum']
@CpuUsage = params['CpuUsage']
@Zone = params['Zone']
@NodeRole = params['NodeRole']
@NodeHttpIp = params['NodeHttpIp']
@JvmMemUsage = params['JvmMemUsage']
@ShardNum = params['ShardNum']
@DiskIds = params['DiskIds']
@Hidden = params['Hidden']
end
end
# ES集群操作详细信息
class Operation < TencentCloud::Common::AbstractModel
# @param Id: 操作唯一id
# @type Id: Integer
# @param StartTime: 操作开始时间
# @type StartTime: String
# @param Type: 操作类型
# @type Type: String
# @param Detail: 操作详情
# @type Detail: :class:`Tencentcloud::Es.v20180416.models.OperationDetail`
# @param Result: 操作结果
# @type Result: String
# @param Tasks: 流程任务信息
# @type Tasks: Array
# @param Progress: 操作进度
# @type Progress: Float
attr_accessor :Id, :StartTime, :Type, :Detail, :Result, :Tasks, :Progress
def initialize(id=nil, starttime=nil, type=nil, detail=nil, result=nil, tasks=nil, progress=nil)
@Id = id
@StartTime = starttime
@Type = type
@Detail = detail
@Result = result
@Tasks = tasks
@Progress = progress
end
def deserialize(params)
@Id = params['Id']
@StartTime = params['StartTime']
@Type = params['Type']
unless params['Detail'].nil?
@Detail = OperationDetail.new
@Detail.deserialize(params['Detail'])
end
@Result = params['Result']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
taskdetail_tmp = TaskDetail.new
taskdetail_tmp.deserialize(i)
@Tasks << taskdetail_tmp
end
end
@Progress = params['Progress']
end
end
# 操作详情
class OperationDetail < TencentCloud::Common::AbstractModel
# @param OldInfo: 实例原始配置信息
# @type OldInfo: Array
# @param NewInfo: 实例更新后配置信息
# @type NewInfo: Array
attr_accessor :OldInfo, :NewInfo
def initialize(oldinfo=nil, newinfo=nil)
@OldInfo = oldinfo
@NewInfo = newinfo
end
def deserialize(params)
unless params['OldInfo'].nil?
@OldInfo = []
params['OldInfo'].each do |i|
keyvalue_tmp = KeyValue.new
keyvalue_tmp.deserialize(i)
@OldInfo << keyvalue_tmp
end
end
unless params['NewInfo'].nil?
@NewInfo = []
params['NewInfo'].each do |i|
keyvalue_tmp = KeyValue.new
keyvalue_tmp.deserialize(i)
@NewInfo << keyvalue_tmp
end
end
end
end
# 集群可运维时间
class OperationDuration < TencentCloud::Common::AbstractModel
# @param Periods: 维护周期，表示周一到周日，可取值[0, 6]
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Periods: Array
# @param TimeStart: 维护开始时间
# @type TimeStart: String
# @param TimeEnd: 维护结束时间
# @type TimeEnd: String
# @param TimeZone: 时区，以UTC形式表示
# @type TimeZone: String
attr_accessor :Periods, :TimeStart, :TimeEnd, :TimeZone
def initialize(periods=nil, timestart=nil, timeend=nil, timezone=nil)
@Periods = periods
@TimeStart = timestart
@TimeEnd = timeend
@TimeZone = timezone
end
def deserialize(params)
@Periods = params['Periods']
@TimeStart = params['TimeStart']
@TimeEnd = params['TimeEnd']
@TimeZone = params['TimeZone']
end
end
# 集群可运维时间
class OperationDurationUpdated < TencentCloud::Common::AbstractModel
# @param Periods: 维护周期，表示周一到周日，可取值[0, 6]
# @type Periods: Array
# @param TimeStart: 维护开始时间
# @type TimeStart: String
# @param TimeEnd: 维护结束时间
# @type TimeEnd: String
# @param TimeZone: 时区，以UTC形式表示
# @type TimeZone: String
# @param MoreInstances: ES集群ID数组
# @type MoreInstances: Array
attr_accessor :Periods, :TimeStart, :TimeEnd, :TimeZone, :MoreInstances
def initialize(periods=nil, timestart=nil, timeend=nil, timezone=nil, moreinstances=nil)
@Periods = periods
@TimeStart = timestart
@TimeEnd = timeend
@TimeZone = timezone
@MoreInstances = moreinstances
end
def deserialize(params)
@Periods = params['Periods']
@TimeStart = params['TimeStart']
@TimeEnd = params['TimeEnd']
@TimeZone = params['TimeZone']
@MoreInstances = params['MoreInstances']
end
end
# 可选web组件信息
class OptionalWebServiceInfo < TencentCloud::Common::AbstractModel
# @param Type: 类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: String
# @param Status: 状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param PublicUrl: 公网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicUrl: String
# @param PrivateUrl: 内网url
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateUrl: String
# @param PublicAccess: 公网访问权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PublicAccess: String
# @param PrivateAccess: 内网访问权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateAccess: String
# @param Version: 版本号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
attr_accessor :Type, :Status, :PublicUrl, :PrivateUrl, :PublicAccess, :PrivateAccess, :Version
def initialize(type=nil, status=nil, publicurl=nil, privateurl=nil, publicaccess=nil, privateaccess=nil, version=nil)
@Type = type
@Status = status
@PublicUrl = publicurl
@PrivateUrl = privateurl
@PublicAccess = publicaccess
@PrivateAccess = privateaccess
@Version = version
end
def deserialize(params)
@Type = params['Type']
@Status = params['Status']
@PublicUrl = params['PublicUrl']
@PrivateUrl = params['PrivateUrl']
@PublicAccess = params['PublicAccess']
@PrivateAccess = params['PrivateAccess']
@Version = params['Version']
end
end
# RestartInstance请求参数结构体
class RestartInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param ForceRestart: 是否强制重启<li>true：强制重启</li><li>false：不强制重启</li>默认false
# @type ForceRestart: Boolean
# @param RestartMode: 重启模式：0 滚动重启； 1 全量重启
# @type RestartMode: Integer
attr_accessor :InstanceId, :ForceRestart, :RestartMode
def initialize(instanceid=nil, forcerestart=nil, restartmode=nil)
@InstanceId = instanceid
@ForceRestart = forcerestart
@RestartMode = restartmode
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ForceRestart = params['ForceRestart']
@RestartMode = params['RestartMode']
end
end
# RestartInstance返回参数结构体
class RestartInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartKibana请求参数结构体
class RestartKibanaRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# RestartKibana返回参数结构体
class RestartKibanaResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartLogstashInstance请求参数结构体
class RestartLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Type: 重启类型，0全量重启，1滚动重启
# @type Type: Integer
attr_accessor :InstanceId, :Type
def initialize(instanceid=nil, type=nil)
@InstanceId = instanceid
@Type = type
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Type = params['Type']
end
end
# RestartLogstashInstance返回参数结构体
class RestartLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartNodes请求参数结构体
class RestartNodesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 集群实例ID
# @type InstanceId: String
# @param NodeNames: 节点名称列表
# @type NodeNames: Array
# @param ForceRestart: 是否强制重启
# @type ForceRestart: Boolean
# @param RestartMode: 可选重启模式"in-place","blue-green"，分别表示重启，蓝绿重启；默认值为"in-place"
# @type RestartMode: String
# @param IsOffline: 节点状态，在蓝绿模式中使用；离线节点蓝绿有风险
# @type IsOffline: Boolean
attr_accessor :InstanceId, :NodeNames, :ForceRestart, :RestartMode, :IsOffline
def initialize(instanceid=nil, nodenames=nil, forcerestart=nil, restartmode=nil, isoffline=nil)
@InstanceId = instanceid
@NodeNames = nodenames
@ForceRestart = forcerestart
@RestartMode = restartmode
@IsOffline = isoffline
end
def deserialize(params)
@InstanceId = params['InstanceId']
@NodeNames = params['NodeNames']
@ForceRestart = params['ForceRestart']
@RestartMode = params['RestartMode']
@IsOffline = params['IsOffline']
end
end
# RestartNodes返回参数结构体
class RestartNodesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# SaveAndDeployLogstashPipeline请求参数结构体
class SaveAndDeployLogstashPipelineRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Pipeline: 实例管道信息
# @type Pipeline: :class:`Tencentcloud::Es.v20180416.models.LogstashPipeline`
# @param OpType: 操作类型<li>1：只保存</li><li>2：保存并部署</li>
# @type OpType: Integer
attr_accessor :InstanceId, :Pipeline, :OpType
def initialize(instanceid=nil, pipeline=nil, optype=nil)
@InstanceId = instanceid
@Pipeline = pipeline
@OpType = optype
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Pipeline'].nil?
@Pipeline = LogstashPipeline.new
@Pipeline.deserialize(params['Pipeline'])
end
@OpType = params['OpType']
end
end
# SaveAndDeployLogstashPipeline返回参数结构体
class SaveAndDeployLogstashPipelineResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# StartLogstashPipelines请求参数结构体
class StartLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# StartLogstashPipelines返回参数结构体
class StartLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# StopLogstashPipelines请求参数结构体
class StopLogstashPipelinesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineIds: 管道ID列表
# @type PipelineIds: Array
attr_accessor :InstanceId, :PipelineIds
def initialize(instanceid=nil, pipelineids=nil)
@InstanceId = instanceid
@PipelineIds = pipelineids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineIds = params['PipelineIds']
end
end
# StopLogstashPipelines返回参数结构体
class StopLogstashPipelinesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 实例操作记录流程任务中的子任务信息（如升级检查任务中的各个检查项）
class SubTaskDetail < TencentCloud::Common::AbstractModel
# @param Name: 子任务名
# @type Name: String
# @param Result: 子任务结果
# @type Result: Boolean
# @param ErrMsg: 子任务错误信息
# @type ErrMsg: String
# @param Type: 子任务类型
# @type Type: String
# @param Status: 子任务状态，0处理中 1成功 -1失败
# @type Status: Integer
# @param FailedIndices: 升级检查失败的索引名
# @type FailedIndices: Array
# @param FinishTime: 子任务结束时间
# @type FinishTime: String
# @param Level: 子任务等级，1警告 2失败
# @type Level: Integer
attr_accessor :Name, :Result, :ErrMsg, :Type, :Status, :FailedIndices, :FinishTime, :Level
def initialize(name=nil, result=nil, errmsg=nil, type=nil, status=nil, failedindices=nil, finishtime=nil, level=nil)
@Name = name
@Result = result
@ErrMsg = errmsg
@Type = type
@Status = status
@FailedIndices = failedindices
@FinishTime = finishtime
@Level = level
end
def deserialize(params)
@Name = params['Name']
@Result = params['Result']
@ErrMsg = params['ErrMsg']
@Type = params['Type']
@Status = params['Status']
@FailedIndices = params['FailedIndices']
@FinishTime = params['FinishTime']
@Level = params['Level']
end
end
# 实例标签信息
class TagInfo < TencentCloud::Common::AbstractModel
# @param TagKey: 标签键
# @type TagKey: String
# @param TagValue: 标签值
# @type TagValue: String
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 实例操作记录中的流程任务信息
class TaskDetail < TencentCloud::Common::AbstractModel
# @param Name: 任务名
# @type Name: String
# @param Progress: 任务进度
# @type Progress: Float
# @param FinishTime: 任务完成时间
# @type FinishTime: String
# @param SubTasks: 子任务
# @type SubTasks: Array
# @param ElapsedTime: 任务花费时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ElapsedTime: Integer
attr_accessor :Name, :Progress, :FinishTime, :SubTasks, :ElapsedTime
def initialize(name=nil, progress=nil, finishtime=nil, subtasks=nil, elapsedtime=nil)
@Name = name
@Progress = progress
@FinishTime = finishtime
@SubTasks = subtasks
@ElapsedTime = elapsedtime
end
def deserialize(params)
@Name = params['Name']
@Progress = params['Progress']
@FinishTime = params['FinishTime']
unless params['SubTasks'].nil?
@SubTasks = []
params['SubTasks'].each do |i|
subtaskdetail_tmp = SubTaskDetail.new
subtaskdetail_tmp.deserialize(i)
@SubTasks << subtaskdetail_tmp
end
end
@ElapsedTime = params['ElapsedTime']
end
end
# UpdateDiagnoseSettings请求参数结构体
class UpdateDiagnoseSettingsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param Status: 0：开启智能运维；-1：关闭智能运维
# @type Status: Integer
# @param CronTime: 智能运维每天定时巡检时间
# @type CronTime: String
attr_accessor :InstanceId, :Status, :CronTime
def initialize(instanceid=nil, status=nil, crontime=nil)
@InstanceId = instanceid
@Status = status
@CronTime = crontime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Status = params['Status']
@CronTime = params['CronTime']
end
end
# UpdateDiagnoseSettings返回参数结构体
class UpdateDiagnoseSettingsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateDictionaries请求参数结构体
class UpdateDictionariesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param IkMainDicts: IK分词主词典COS地址
# @type IkMainDicts: Array
# @param IkStopwords: IK分词停用词词典COS地址
# @type IkStopwords: Array
# @param Synonym: 同义词词典COS地址
# @type Synonym: Array
# @param QQDict: QQ分词词典COS地址
# @type QQDict: Array
# @param UpdateType: 0：安装；1：删除。默认值0
# @type UpdateType: Integer
# @param ForceRestart: 是否强制重启集群。默认值false
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :IkMainDicts, :IkStopwords, :Synonym, :QQDict, :UpdateType, :ForceRestart
def initialize(instanceid=nil, ikmaindicts=nil, ikstopwords=nil, synonym=nil, qqdict=nil, updatetype=nil, forcerestart=nil)
@InstanceId = instanceid
@IkMainDicts = ikmaindicts
@IkStopwords = ikstopwords
@Synonym = synonym
@QQDict = qqdict
@UpdateType = updatetype
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IkMainDicts = params['IkMainDicts']
@IkStopwords = params['IkStopwords']
@Synonym = params['Synonym']
@QQDict = params['QQDict']
@UpdateType = params['UpdateType']
@ForceRestart = params['ForceRestart']
end
end
# UpdateDictionaries返回参数结构体
class UpdateDictionariesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateIndex请求参数结构体
class UpdateIndexRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES集群ID
# @type InstanceId: String
# @param IndexType: 更新的索引类型。auto：自治索引；normal：普通索引
# @type IndexType: String
# @param IndexName: 更新的索引名
# @type IndexName: String
# @param UpdateMetaJson: 更新的索引元数据JSON，如mappings、settings
# @type UpdateMetaJson: String
# @param Username: 集群访问用户名
# @type Username: String
# @param Password: 集群访问密码
# @type Password: String
# @param RolloverBackingIndex: 是否滚动后备索引
# @type RolloverBackingIndex: Boolean
attr_accessor :InstanceId, :IndexType, :IndexName, :UpdateMetaJson, :Username, :Password, :RolloverBackingIndex
def initialize(instanceid=nil, indextype=nil, indexname=nil, updatemetajson=nil, username=nil, password=nil, rolloverbackingindex=nil)
@InstanceId = instanceid
@IndexType = indextype
@IndexName = indexname
@UpdateMetaJson = updatemetajson
@Username = username
@Password = password
@RolloverBackingIndex = rolloverbackingindex
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IndexType = params['IndexType']
@IndexName = params['IndexName']
@UpdateMetaJson = params['UpdateMetaJson']
@Username = params['Username']
@Password = params['Password']
@RolloverBackingIndex = params['RolloverBackingIndex']
end
end
# UpdateIndex返回参数结构体
class UpdateIndexResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateInstance请求参数结构体
class UpdateInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称（1-50 个英文、汉字、数字、连接线-或下划线_）
# @type InstanceName: String
# @param NodeNum: 已废弃请使用NodeInfoList
# 节点个数（2-50个）
# @type NodeNum: Integer
# @param EsConfig: ES配置项（JSON格式字符串）
# @type EsConfig: String
# @param Password: 默认用户elastic的密码（8到16位，至少包括两项（[a-z,A-Z],[0-9]和[-!@#$%&^*+=_:;,.?]的特殊符号）
# @type Password: String
# @param EsAcl: 可视化组件（Kibana、Cerebro）的公网访问策略
# @type EsAcl: :class:`Tencentcloud::Es.v20180416.models.EsAcl`
# @param DiskSize: 已废弃请使用NodeInfoList
# 磁盘大小（单位GB）
# @type DiskSize: Integer
# @param NodeType: 已废弃请使用NodeInfoList
# 节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type NodeType: String
# @param MasterNodeNum: 已废弃请使用NodeInfoList
# 专用主节点个数（只支持3个或5个）
# @type MasterNodeNum: Integer
# @param MasterNodeType: 已废弃请使用NodeInfoList
# 专用主节点规格<li>ES.S1.SMALL2：1核2G</li><li>ES.S1.MEDIUM4：2核4G</li><li>ES.S1.MEDIUM8：2核8G</li><li>ES.S1.LARGE16：4核16G</li><li>ES.S1.2XLARGE32：8核32G</li><li>ES.S1.4XLARGE32：16核32G</li><li>ES.S1.4XLARGE64：16核64G</li>
# @type MasterNodeType: String
# @param MasterNodeDiskSize: 已废弃请使用NodeInfoList
# 专用主节点磁盘大小（单位GB系统默认配置为50GB,暂不支持自定义）
# @type MasterNodeDiskSize: Integer
# @param ForceRestart: 更新配置时是否强制重启<li>true强制重启</li><li>false不强制重启</li>当前仅更新EsConfig时需要设置，默认值为false
# @type ForceRestart: Boolean
# @param CosBackup: COS自动备份信息
# @type CosBackup: :class:`Tencentcloud::Es.v20180416.models.CosBackup`
# @param NodeInfoList: 节点信息列表，可以只传递要更新的节点及其对应的规格信息。支持的操作包括<li>修改一种节点的个数</li><li>修改一种节点的节点规格及磁盘大小</li><li>增加一种节点类型（需要同时指定该节点的类型，个数，规格，磁盘等信息）</li>上述操作一次只能进行一种，且磁盘类型不支持修改
# @type NodeInfoList: Array
# @param PublicAccess: ES集群公网访问状态
# OPEN 开启
# CLOSE 关闭
# @type PublicAccess: String
# @param EsPublicAcl: 公网访问控制列表
# @type EsPublicAcl: :class:`Tencentcloud::Es.v20180416.models.EsPublicAcl`
# @param KibanaPublicAccess: Kibana公网访问状态
# OPEN 开启
# CLOSE 关闭
# @type KibanaPublicAccess: String
# @param KibanaPrivateAccess: Kibana内网访问状态
# OPEN 开启
# CLOSE 关闭
# @type KibanaPrivateAccess: String
# @param BasicSecurityType: ES 6.8及以上版本基础版开启或关闭用户认证
# @type BasicSecurityType: Integer
# @param KibanaPrivatePort: Kibana内网端口
# @type KibanaPrivatePort: Integer
# @param ScaleType: 0: 蓝绿变更方式扩容，集群不重启 （默认） 1: 磁盘解挂载扩容，集群滚动重启
# @type ScaleType: Integer
# @param MultiZoneInfo: 多可用区部署
# @type MultiZoneInfo: Array
# @param SceneType: 场景化模板类型 -1：不启用 1：通用 2：日志 3：搜索
# @type SceneType: Integer
# @param KibanaConfig: Kibana配置项（JSON格式字符串）
# @type KibanaConfig: String
# @param WebNodeTypeInfo: 可视化节点配置
# @type WebNodeTypeInfo: :class:`Tencentcloud::Es.v20180416.models.WebNodeTypeInfo`
# @param SwitchPrivateLink: 切换到新网络架构
# @type SwitchPrivateLink: String
# @param EnableCerebro: 启用Cerebro
# @type EnableCerebro: Boolean
# @param CerebroPublicAccess: Cerebro公网访问状态
# OPEN 开启
# CLOSE 关闭
# @type CerebroPublicAccess: String
# @param CerebroPrivateAccess: Cerebro内网访问状态
# OPEN 开启
# CLOSE 关闭
# @type CerebroPrivateAccess: String
# @param EsConfigSet: 新增或修改的配置组信息
# @type EsConfigSet: :class:`Tencentcloud::Es.v20180416.models.EsConfigSetInfo`
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDurationUpdated`
# @param KibanaAlteringPublicAccess: 是否开启Alerting 外网告警输出：
# OPEN 开启
# CLOSE 关闭
# @type KibanaAlteringPublicAccess: String
attr_accessor :InstanceId, :InstanceName, :NodeNum, :EsConfig, :Password, :EsAcl, :DiskSize, :NodeType, :MasterNodeNum, :MasterNodeType, :MasterNodeDiskSize, :ForceRestart, :CosBackup, :NodeInfoList, :PublicAccess, :EsPublicAcl, :KibanaPublicAccess, :KibanaPrivateAccess, :BasicSecurityType, :KibanaPrivatePort, :ScaleType, :MultiZoneInfo, :SceneType, :KibanaConfig, :WebNodeTypeInfo, :SwitchPrivateLink, :EnableCerebro, :CerebroPublicAccess, :CerebroPrivateAccess, :EsConfigSet, :OperationDuration, :KibanaAlteringPublicAccess
def initialize(instanceid=nil, instancename=nil, nodenum=nil, esconfig=nil, password=nil, esacl=nil, disksize=nil, nodetype=nil, masternodenum=nil, masternodetype=nil, masternodedisksize=nil, forcerestart=nil, cosbackup=nil, nodeinfolist=nil, publicaccess=nil, espublicacl=nil, kibanapublicaccess=nil, kibanaprivateaccess=nil, basicsecuritytype=nil, kibanaprivateport=nil, scaletype=nil, multizoneinfo=nil, scenetype=nil, kibanaconfig=nil, webnodetypeinfo=nil, switchprivatelink=nil, enablecerebro=nil, cerebropublicaccess=nil, cerebroprivateaccess=nil, esconfigset=nil, operationduration=nil, kibanaalteringpublicaccess=nil)
@InstanceId = instanceid
@InstanceName = instancename
@NodeNum = nodenum
@EsConfig = esconfig
@Password = password
@EsAcl = esacl
@DiskSize = disksize
@NodeType = nodetype
@MasterNodeNum = masternodenum
@MasterNodeType = masternodetype
@MasterNodeDiskSize = masternodedisksize
@ForceRestart = forcerestart
@CosBackup = cosbackup
@NodeInfoList = nodeinfolist
@PublicAccess = publicaccess
@EsPublicAcl = espublicacl
@KibanaPublicAccess = kibanapublicaccess
@KibanaPrivateAccess = kibanaprivateaccess
@BasicSecurityType = basicsecuritytype
@KibanaPrivatePort = kibanaprivateport
@ScaleType = scaletype
@MultiZoneInfo = multizoneinfo
@SceneType = scenetype
@KibanaConfig = kibanaconfig
@WebNodeTypeInfo = webnodetypeinfo
@SwitchPrivateLink = switchprivatelink
@EnableCerebro = enablecerebro
@CerebroPublicAccess = cerebropublicaccess
@CerebroPrivateAccess = cerebroprivateaccess
@EsConfigSet = esconfigset
@OperationDuration = operationduration
@KibanaAlteringPublicAccess = kibanaalteringpublicaccess
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@NodeNum = params['NodeNum']
@EsConfig = params['EsConfig']
@Password = params['Password']
unless params['EsAcl'].nil?
@EsAcl = EsAcl.new
@EsAcl.deserialize(params['EsAcl'])
end
@DiskSize = params['DiskSize']
@NodeType = params['NodeType']
@MasterNodeNum = params['MasterNodeNum']
@MasterNodeType = params['MasterNodeType']
@MasterNodeDiskSize = params['MasterNodeDiskSize']
@ForceRestart = params['ForceRestart']
unless params['CosBackup'].nil?
@CosBackup = CosBackup.new
@CosBackup.deserialize(params['CosBackup'])
end
unless params['NodeInfoList'].nil?
@NodeInfoList = []
params['NodeInfoList'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodeInfoList << nodeinfo_tmp
end
end
@PublicAccess = params['PublicAccess']
unless params['EsPublicAcl'].nil?
@EsPublicAcl = EsPublicAcl.new
@EsPublicAcl.deserialize(params['EsPublicAcl'])
end
@KibanaPublicAccess = params['KibanaPublicAccess']
@KibanaPrivateAccess = params['KibanaPrivateAccess']
@BasicSecurityType = params['BasicSecurityType']
@KibanaPrivatePort = params['KibanaPrivatePort']
@ScaleType = params['ScaleType']
unless params['MultiZoneInfo'].nil?
@MultiZoneInfo = []
params['MultiZoneInfo'].each do |i|
zonedetail_tmp = ZoneDetail.new
zonedetail_tmp.deserialize(i)
@MultiZoneInfo << zonedetail_tmp
end
end
@SceneType = params['SceneType']
@KibanaConfig = params['KibanaConfig']
unless params['WebNodeTypeInfo'].nil?
@WebNodeTypeInfo = WebNodeTypeInfo.new
@WebNodeTypeInfo.deserialize(params['WebNodeTypeInfo'])
end
@SwitchPrivateLink = params['SwitchPrivateLink']
@EnableCerebro = params['EnableCerebro']
@CerebroPublicAccess = params['CerebroPublicAccess']
@CerebroPrivateAccess = params['CerebroPrivateAccess']
unless params['EsConfigSet'].nil?
@EsConfigSet = EsConfigSetInfo.new
@EsConfigSet.deserialize(params['EsConfigSet'])
end
unless params['OperationDuration'].nil?
@OperationDuration = OperationDurationUpdated.new
@OperationDuration.deserialize(params['OperationDuration'])
end
@KibanaAlteringPublicAccess = params['KibanaAlteringPublicAccess']
end
end
# UpdateInstance返回参数结构体
class UpdateInstanceResponse < TencentCloud::Common::AbstractModel
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# UpdateJdk请求参数结构体
class UpdateJdkRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: ES实例ID
# @type InstanceId: String
# @param Jdk: Jdk类型，支持kona和oracle
# @type Jdk: String
# @param Gc: Gc类型，支持g1和cms
# @type Gc: String
# @param ForceRestart: 是否强制重启
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :Jdk, :Gc, :ForceRestart
def initialize(instanceid=nil, jdk=nil, gc=nil, forcerestart=nil)
@InstanceId = instanceid
@Jdk = jdk
@Gc = gc
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Jdk = params['Jdk']
@Gc = params['Gc']
@ForceRestart = params['ForceRestart']
end
end
# UpdateJdk返回参数结构体
class UpdateJdkResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateLogstashInstance请求参数结构体
class UpdateLogstashInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param NodeNum: 实例节点数量
# @type NodeNum: Integer
# @param YMLConfig: 实例YML配置
# @type YMLConfig: String
# @param BindedES: 实例绑定的ES集群信息
# @type BindedES: :class:`Tencentcloud::Es.v20180416.models.LogstashBindedES`
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param ExtendedFiles: 扩展文件列表
# @type ExtendedFiles: Array
# @param NodeType: 实例规格
# @type NodeType: String
# @param DiskSize: 节点磁盘容量
# @type DiskSize: Integer
# @param OperationDuration: 可维护时间段
# @type OperationDuration: :class:`Tencentcloud::Es.v20180416.models.OperationDurationUpdated`
attr_accessor :InstanceId, :NodeNum, :YMLConfig, :BindedES, :InstanceName, :ExtendedFiles, :NodeType, :DiskSize, :OperationDuration
def initialize(instanceid=nil, nodenum=nil, ymlconfig=nil, bindedes=nil, instancename=nil, extendedfiles=nil, nodetype=nil, disksize=nil, operationduration=nil)
@InstanceId = instanceid
@NodeNum = nodenum
@YMLConfig = ymlconfig
@BindedES = bindedes
@InstanceName = instancename
@ExtendedFiles = extendedfiles
@NodeType = nodetype
@DiskSize = disksize
@OperationDuration = operationduration
end
def deserialize(params)
@InstanceId = params['InstanceId']
@NodeNum = params['NodeNum']
@YMLConfig = params['YMLConfig']
unless params['BindedES'].nil?
@BindedES = LogstashBindedES.new
@BindedES.deserialize(params['BindedES'])
end
@InstanceName = params['InstanceName']
unless params['ExtendedFiles'].nil?
@ExtendedFiles = []
params['ExtendedFiles'].each do |i|
logstashextendedfile_tmp = LogstashExtendedFile.new
logstashextendedfile_tmp.deserialize(i)
@ExtendedFiles << logstashextendedfile_tmp
end
end
@NodeType = params['NodeType']
@DiskSize = params['DiskSize']
unless params['OperationDuration'].nil?
@OperationDuration = OperationDurationUpdated.new
@OperationDuration.deserialize(params['OperationDuration'])
end
end
end
# UpdateLogstashInstance返回参数结构体
class UpdateLogstashInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateLogstashPipelineDesc请求参数结构体
class UpdateLogstashPipelineDescRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param PipelineId: 实例管道ID
# @type PipelineId: String
# @param PipelineDesc: 管道描述信息
# @type PipelineDesc: String
attr_accessor :InstanceId, :PipelineId, :PipelineDesc
def initialize(instanceid=nil, pipelineid=nil, pipelinedesc=nil)
@InstanceId = instanceid
@PipelineId = pipelineid
@PipelineDesc = pipelinedesc
end
def deserialize(params)
@InstanceId = params['InstanceId']
@PipelineId = params['PipelineId']
@PipelineDesc = params['PipelineDesc']
end
end
# UpdateLogstashPipelineDesc返回参数结构体
class UpdateLogstashPipelineDescResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdatePlugins请求参数结构体
class UpdatePluginsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstallPluginList: 需要安装的插件名列表
# @type InstallPluginList: Array
# @param RemovePluginList: 需要卸载的插件名列表
# @type RemovePluginList: Array
# @param ForceRestart: 是否强制重启，默认值false
# @type ForceRestart: Boolean
# @param ForceUpdate: 是否重新安装，默认值false
# @type ForceUpdate: Boolean
# @param PluginType: 0：系统插件
# @type PluginType: Integer
attr_accessor :InstanceId, :InstallPluginList, :RemovePluginList, :ForceRestart, :ForceUpdate, :PluginType
def initialize(instanceid=nil, installpluginlist=nil, removepluginlist=nil, forcerestart=nil, forceupdate=nil, plugintype=nil)
@InstanceId = instanceid
@InstallPluginList = installpluginlist
@RemovePluginList = removepluginlist
@ForceRestart = forcerestart
@ForceUpdate = forceupdate
@PluginType = plugintype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstallPluginList = params['InstallPluginList']
@RemovePluginList = params['RemovePluginList']
@ForceRestart = params['ForceRestart']
@ForceUpdate = params['ForceUpdate']
@PluginType = params['PluginType']
end
end
# UpdatePlugins返回参数结构体
class UpdatePluginsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateRequestTargetNodeTypes请求参数结构体
class UpdateRequestTargetNodeTypesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param TargetNodeTypes: 接收请求的目标节点类型列表
# @type TargetNodeTypes: Array
attr_accessor :InstanceId, :TargetNodeTypes
def initialize(instanceid=nil, targetnodetypes=nil)
@InstanceId = instanceid
@TargetNodeTypes = targetnodetypes
end
def deserialize(params)
@InstanceId = params['InstanceId']
@TargetNodeTypes = params['TargetNodeTypes']
end
end
# UpdateRequestTargetNodeTypes返回参数结构体
class UpdateRequestTargetNodeTypesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpgradeInstance请求参数结构体
class UpgradeInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param EsVersion: 目标ES版本，支持：”6.4.3“, "6.8.2"，"7.5.1"
# @type EsVersion: String
# @param CheckOnly: 是否只做升级检查，默认值为false
# @type CheckOnly: Boolean
# @param LicenseType: 目标商业特性版本：<li>oss 开源版</li><li>basic 基础版</li>当前仅在5.6.4升级6.x版本时使用，默认值为basic
# @type LicenseType: String
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证<li>1：不开启</li><li>2：开启</li>
# @type BasicSecurityType: Integer
# @param UpgradeMode: 升级方式：<li>scale 蓝绿变更</li><li>restart 滚动重启</li>默认值为scale
# @type UpgradeMode: String
# @param CosBackup: 升级版本前是否对集群进行备份，默认不备份
# @type CosBackup: Boolean
# @param SkipCheckForceRestart: 滚动模式时，是否跳过检查，进行强制重启。默认值为false
# @type SkipCheckForceRestart: Boolean
attr_accessor :InstanceId, :EsVersion, :CheckOnly, :LicenseType, :BasicSecurityType, :UpgradeMode, :CosBackup, :SkipCheckForceRestart
def initialize(instanceid=nil, esversion=nil, checkonly=nil, licensetype=nil, basicsecuritytype=nil, upgrademode=nil, cosbackup=nil, skipcheckforcerestart=nil)
@InstanceId = instanceid
@EsVersion = esversion
@CheckOnly = checkonly
@LicenseType = licensetype
@BasicSecurityType = basicsecuritytype
@UpgradeMode = upgrademode
@CosBackup = cosbackup
@SkipCheckForceRestart = skipcheckforcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@EsVersion = params['EsVersion']
@CheckOnly = params['CheckOnly']
@LicenseType = params['LicenseType']
@BasicSecurityType = params['BasicSecurityType']
@UpgradeMode = params['UpgradeMode']
@CosBackup = params['CosBackup']
@SkipCheckForceRestart = params['SkipCheckForceRestart']
end
end
# UpgradeInstance返回参数结构体
class UpgradeInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpgradeLicense请求参数结构体
class UpgradeLicenseRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param LicenseType: License类型<li>oss：开源版</li><li>basic：基础版</li><li>platinum：白金版</li>默认值platinum
# @type LicenseType: String
# @param AutoVoucher: 是否自动使用代金券<li>0：不自动使用</li><li>1：自动使用</li>默认值0
# @type AutoVoucher: Integer
# @param VoucherIds: 代金券ID列表（目前仅支持指定一张代金券）
# @type VoucherIds: Array
# @param BasicSecurityType: 6.8（及以上版本）基础版是否开启xpack security认证<li>1：不开启</li><li>2：开启</li>
# @type BasicSecurityType: Integer
# @param ForceRestart: 是否强制重启<li>true强制重启</li><li>false不强制重启</li> 默认值false
# @type ForceRestart: Boolean
attr_accessor :InstanceId, :LicenseType, :AutoVoucher, :VoucherIds, :BasicSecurityType, :ForceRestart
def initialize(instanceid=nil, licensetype=nil, autovoucher=nil, voucherids=nil, basicsecuritytype=nil, forcerestart=nil)
@InstanceId = instanceid
@LicenseType = licensetype
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@BasicSecurityType = basicsecuritytype
@ForceRestart = forcerestart
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LicenseType = params['LicenseType']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@BasicSecurityType = params['BasicSecurityType']
@ForceRestart = params['ForceRestart']
end
end
# UpgradeLicense返回参数结构体
class UpgradeLicenseResponse < TencentCloud::Common::AbstractModel
# @param DealName: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# 可视化节点配置
class WebNodeTypeInfo < TencentCloud::Common::AbstractModel
# @param NodeNum: 可视化节点个数，固定为1
# @type NodeNum: Integer
# @param NodeType: 可视化节点规格
# @type NodeType: String
attr_accessor :NodeNum, :NodeType
def initialize(nodenum=nil, nodetype=nil)
@NodeNum = nodenum
@NodeType = nodetype
end
def deserialize(params)
@NodeNum = params['NodeNum']
@NodeType = params['NodeType']
end
end
# 多可用区部署时可用区的详细信息
class ZoneDetail < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param SubnetId: 子网ID
# @type SubnetId: String
attr_accessor :Zone, :SubnetId
def initialize(zone=nil, subnetid=nil)
@Zone = zone
@SubnetId = subnetid
end
def deserialize(params)
@Zone = params['Zone']
@SubnetId = params['SubnetId']
end
end
end
end
end